{
"NDC": [
{
"NDCCode": "49288-0193-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0193-2)",
"NDC11Code": "49288-0193-02",
"ProductNDC": "49288-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eucalyptus",
"NonProprietaryName": "Eucalyptus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "EUCALYPTUS GLOBULUS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0193-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0193-5)",
"NDC11Code": "49288-0193-05",
"ProductNDC": "49288-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eucalyptus",
"NonProprietaryName": "Eucalyptus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "EUCALYPTUS GLOBULUS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0193-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0193-1)",
"NDC11Code": "49288-0193-01",
"ProductNDC": "49288-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eucalyptus",
"NonProprietaryName": "Eucalyptus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "EUCALYPTUS GLOBULUS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0193-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0193-3)",
"NDC11Code": "49288-0193-03",
"ProductNDC": "49288-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eucalyptus",
"NonProprietaryName": "Eucalyptus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "EUCALYPTUS GLOBULUS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0193-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0193-4)",
"NDC11Code": "49288-0193-04",
"ProductNDC": "49288-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eucalyptus",
"NonProprietaryName": "Eucalyptus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "EUCALYPTUS GLOBULUS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "15631-0193-5",
"PackageDescription": "12500 PELLET in 1 PACKAGE (15631-0193-5) ",
"NDC11Code": "15631-0193-05",
"ProductNDC": "15631-0193",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ferrum Picricum",
"NonProprietaryName": "Ferrum Picricum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151025",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "FERRIC PICRATE",
"StrengthNumber": "6",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "50090-0193-5",
"PackageDescription": "5 TABLET in 1 BOTTLE, PLASTIC (50090-0193-5)",
"NDC11Code": "50090-0193-05",
"ProductNDC": "50090-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077749",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; and stiff-man syndrome. Oral diazepam may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The empirical formula is C16H13ClN2O and the molecular weight is 284.75. The structural formula is as follows. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: calcium stearate, colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate and microcrystalline cellulose with the following dyes: 5-mg tablets contain D&C Yellow #10 aluminum lake; 10-mg tablets contain FD&C Blue #1 aluminum lake. Diazepam 2-mg tablets contain no dye."
},
{
"NDCCode": "51552-0193-5",
"PackageDescription": "500 g in 1 CONTAINER (51552-0193-5)",
"NDC11Code": "51552-0193-05",
"ProductNDC": "51552-0193",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sodium Sulfite",
"DosageFormName": "POWDER",
"StartMarketingDate": "19980401",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Fagron Inc",
"SubstanceName": "SODIUM SULFITE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "53499-0193-5",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 BOX (53499-0193-5) > 118 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "53499-0193-05",
"ProductNDC": "53499-0193",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cough And Bronchial With Zinc",
"NonProprietaryName": "Antimony Pentasulfide, Bryonia Alba Root, Drosera Rotundifolia, Eucalyptus Globulus Leaf, Ipecac, Spongia Officinalis Skeleton, Roasted, Zinc Gluconate",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20040701",
"EndMarketingDate": "20240430",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Schwabe North America, Inc",
"SubstanceName": "ANTIMONY PENTASULFIDE; BRYONIA ALBA ROOT; DROSERA ROTUNDIFOLIA FLOWERING TOP; EUCALYPTUS GLOBULUS LEAF; IPECAC; SPONGIA OFFICINALIS SKELETON, ROASTED; ZINC GLUCONATE",
"StrengthNumber": "8; 3; 4; 3; 4; 3; 1",
"StrengthUnit": "[hp_X]/237mL; [hp_X]/237mL; [hp_X]/237mL; [hp_X]/237mL; [hp_X]/237mL; [hp_X]/237mL; [hp_X]/237mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20040701",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily relieves cough due to minor throat and bronchial irritation as may occur with a cold. Helps loosen phlegm (mucus) and thin bronchial secretions to drain bronchial tubes."
},
{
"NDCCode": "58988-0193-5",
"PackageDescription": "1 BOTTLE in 1 BOX (58988-0193-5) > 30 mL in 1 BOTTLE",
"NDC11Code": "58988-0193-05",
"ProductNDC": "58988-0193",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nasal Decongestant",
"NonProprietaryName": "Oxymetazoline Hcl",
"DosageFormName": "SPRAY",
"RouteName": "NASAL",
"StartMarketingDate": "20131209",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Promex, LLC",
"SubstanceName": "OXYMETAZOLINE HYDROCHLORIDE",
"StrengthNumber": ".05",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "temporarily relieves nasal congestion due to:. common cold. hay fever. upper respiratory allergies. sinusitis. reduces swelling of nasal passages; shrinks swollen membranes. temporarily restores freer breathing through the nose."
},
{
"NDCCode": "66558-0193-5",
"PackageDescription": "35 g in 1 JAR (66558-0193-5) ",
"NDC11Code": "66558-0193-05",
"ProductNDC": "66558-0193",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Liraglutide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20210601",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "FRESENIUS KABI IPSUM SRL",
"SubstanceName": "LIRAGLUTIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2023-05-15",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "01-JUN-21"
},
{
"NDCCode": "71335-0193-5",
"PackageDescription": "40 TABLET in 1 BOTTLE (71335-0193-5) ",
"NDC11Code": "71335-0193-05",
"ProductNDC": "71335-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040777",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE",
"StrengthNumber": "325; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2023-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20211227",
"SamplePackage": "N"
},
{
"NDCCode": "0069-0193-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (0069-0193-01) ",
"NDC11Code": "00069-0193-01",
"ProductNDC": "0069-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20171218",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203341",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171218",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "0316-0193-16",
"PackageDescription": "1 JAR in 1 CARTON (0316-0193-16) / 454 g in 1 JAR",
"NDC11Code": "00316-0193-16",
"ProductNDC": "0316-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone",
"NonProprietaryName": "Hydrocortisone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080706",
"LabelerName": "Crown Laboratories",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "25",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160106",
"SamplePackage": "N",
"IndicationAndUsage": "Topcial corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Hydrocortisone is a member of this class. Chemically hydrocortisone is pregn-4-ene-3, 20-dione, 11, 17, 21-trihydroxy-, (11β)-. Its molecular formula is C 21H 30O 5 and molecular weight is 362.47. Its structural formula is:. Each gram of Hydrocortisone Cream USP, 1% contains 10 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid. Each gram of Hydrocortisone Cream USP, 2.5% contains 25 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid."
},
{
"NDCCode": "0316-0193-20",
"PackageDescription": "1 TUBE in 1 CARTON (0316-0193-20) / 20 g in 1 TUBE",
"NDC11Code": "00316-0193-20",
"ProductNDC": "0316-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone",
"NonProprietaryName": "Hydrocortisone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080706",
"LabelerName": "Crown Laboratories",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "25",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160106",
"SamplePackage": "N",
"IndicationAndUsage": "Topcial corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Hydrocortisone is a member of this class. Chemically hydrocortisone is pregn-4-ene-3, 20-dione, 11, 17, 21-trihydroxy-, (11β)-. Its molecular formula is C 21H 30O 5 and molecular weight is 362.47. Its structural formula is:. Each gram of Hydrocortisone Cream USP, 1% contains 10 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid. Each gram of Hydrocortisone Cream USP, 2.5% contains 25 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid."
},
{
"NDCCode": "0316-0193-30",
"PackageDescription": "1 TUBE in 1 CARTON (0316-0193-30) / 30 g in 1 TUBE",
"NDC11Code": "00316-0193-30",
"ProductNDC": "0316-0193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone",
"NonProprietaryName": "Hydrocortisone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080706",
"LabelerName": "Crown Laboratories",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "25",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160106",
"SamplePackage": "N",
"IndicationAndUsage": "Topcial corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Hydrocortisone is a member of this class. Chemically hydrocortisone is pregn-4-ene-3, 20-dione, 11, 17, 21-trihydroxy-, (11β)-. Its molecular formula is C 21H 30O 5 and molecular weight is 362.47. Its structural formula is:. Each gram of Hydrocortisone Cream USP, 1% contains 10 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid. Each gram of Hydrocortisone Cream USP, 2.5% contains 25 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid."
},
{
"NDCCode": "10544-193-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (10544-193-60)",
"NDC11Code": "10544-0193-60",
"ProductNDC": "10544-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glipizide",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074223",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea [EPC],Sulfonylurea Compounds [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Glipizide tablets are indicated as an adjunct to diet for the control of hyperglycemia and its associated symptomatology in patients with non-insulin-dependent diabetes mellitus (NIDDM; type II), formerly known as maturity-onset diabetes, after an adequate trial of dietary therapy has proved unsatisfactory. In initiating treatment for non-insulin-dependent diabetes, diet should be emphasized as the primary form of treatment. Caloric restriction and weight loss are essential in the obese diabetic patient. Proper dietary management alone may be effective in controlling the blood glucose and symptoms of hyperglycemia. The importance of regular physical activity should also be stressed, and cardiovascular risk factors should be identified, and corrective measures taken where possible. If this treatment program fails to reduce symptoms and/or blood glucose, the use of an oral sulfonylurea or insulin should be considered. Use of glipizide must be viewed by both the physician and patient as a treatment in addition to diet, and not as a substitute for diet or as a convenient mechanism for avoiding dietary restraint. Furthermore, loss of blood glucose control on diet alone also may be transient, thus requiring only short-term administration of glipizide. During maintenance programs, glipizide should be discontinued if satisfactory lowering of blood glucose is no longer achieved. Judgements should be based on regular clinical and laboratory evaluations. In considering the use of glipizide in asymptomatic patients, it should be recognized that controlling the blood glucose in non-insulin-dependent diabetes has not been definitely established to be effective in preventing the long-term cardiovascular or neural complications of diabetes.",
"Description": "Glipizide is an oral blood-glucose-lowering drug of the sulfonylurea class. The Chemical Abstracts name of glipizide is 1-Cyclohexyl-3-[[ p-[2-(5-methylpyrazinecarboxamido)-ethyl]phenyl]sulfonyl]urea. The molecular formula is C 21H 27N 5O 4S; the molecular weight is 445.54; the structural formula is shown below:. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet, for oral administration, contains 5 mg or 10 mg glipizide. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide; croscarmellose sodium; lactose anhydrous; microcrystalline cellulose; pregelatinized starch and stearic acid."
},
{
"NDCCode": "10702-193-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (10702-193-01) ",
"NDC11Code": "10702-0193-01",
"ProductNDC": "10702-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209036",
"LabelerName": "KVK-Tech, Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170622",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see WARNINGS], reserve opioid analgesics, including hydrocodone bitartrate for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Hydrocodone bitartrate and acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4´-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/300 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/300 mg, 7.5 mg/300 mg and 10 mg/300 mg: This product complies with USP dissolution test 2. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/325 mg, 7.5 mg/325 mg and 10 mg/325 mg: This product complies with USP dissolution test 1."
},
{
"NDCCode": "10702-193-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (10702-193-03) ",
"NDC11Code": "10702-0193-03",
"ProductNDC": "10702-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209036",
"LabelerName": "KVK-Tech, Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170622",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see WARNINGS], reserve opioid analgesics, including hydrocodone bitartrate for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Hydrocodone bitartrate and acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4´-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/300 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/300 mg, 7.5 mg/300 mg and 10 mg/300 mg: This product complies with USP dissolution test 2. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/325 mg, 7.5 mg/325 mg and 10 mg/325 mg: This product complies with USP dissolution test 1."
},
{
"NDCCode": "10702-193-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (10702-193-10) ",
"NDC11Code": "10702-0193-10",
"ProductNDC": "10702-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209036",
"LabelerName": "KVK-Tech, Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170622",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see WARNINGS], reserve opioid analgesics, including hydrocodone bitartrate for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Hydrocodone bitartrate and acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4´-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/300 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/300 mg, 7.5 mg/300 mg and 10 mg/300 mg: This product complies with USP dissolution test 2. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/325 mg, 7.5 mg/325 mg and 10 mg/325 mg: This product complies with USP dissolution test 1."
},
{
"NDCCode": "10702-193-50",
"PackageDescription": "500 TABLET in 1 BOTTLE (10702-193-50) ",
"NDC11Code": "10702-0193-50",
"ProductNDC": "10702-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170622",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209036",
"LabelerName": "KVK-Tech, Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170622",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see WARNINGS], reserve opioid analgesics, including hydrocodone bitartrate for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Hydrocodone bitartrate and acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4´-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/300 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/300 mg, 7.5 mg/300 mg and 10 mg/300 mg: This product complies with USP dissolution test 2. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/325 mg, 7.5 mg/325 mg and 10 mg/325 mg: This product complies with USP dissolution test 1."
},
{
"NDCCode": "11534-193-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (11534-193-01) ",
"NDC11Code": "11534-0193-01",
"ProductNDC": "11534-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate And Amphetamine Sulfate",
"NonProprietaryName": "Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate And Amphetamine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180704",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209799",
"LabelerName": "SUNRISE PHARMACEUTICAL, INC.",
"SubstanceName": "DEXTROAMPHETAMINE SACCHARATE; AMPHETAMINE ASPARTATE MONOHYDRATE; DEXTROAMPHETAMINE SULFATE; AMPHETAMINE SULFATE",
"StrengthNumber": "3.125; 3.125; 3.125; 3.125",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180704",
"SamplePackage": "N",
"IndicationAndUsage": "Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) and Narcolepsy. Attention Deficit Hyperactivity Disorder (ADHD). A diagnosis of Attention Deficit Hyperactivity Disorder (ADHD; DSM-IV®) implies the presence of hyperactive-impulsive or inattentive symptoms that caused impairment and were present before age 7 years. The symptoms must cause clinically significant impairment, e.g., in social, academic, or occupational functioning, and be present in two or more settings, e.g., school (or work) and at home. The symptoms must not be better accounted for by another mental disorder. For the Inattentive Type, at least six of the following symptoms must have persisted for at least 6 months: lack of attention to details/careless mistakes; lack of sustained attention; poor listener; failure to follow through on tasks; poor organization; avoids tasks requiring sustained mental effort; loses things; easily distracted; forgetful. For the Hyperactive-Impulsive Type, at least six of the following symptoms must have persisted for at least 6 months: fidgeting/squirming; leaving seat; inappropriate running/climbing; difficulty with quiet activities; “on the go;” excessive talking; blurting answers; can't wait turn; intrusive. The Combined Type requires both inattentive and hyperactive-impulsive criteria to be met.",
"Description": "A single-entity amphetamine product combining the neutral sulfate salts of dextroamphetamine and amphetamine, with the dextro isomer of amphetamine saccharate and d, l-amphetamine aspartate monohydrate. Inactive Ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and pregelatinized starch (botanical source: maize). Colors. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) 5 mg, 7.5 mg and 10 mg also contain FD&C Blue #1 Aluminum Lake as a color additive. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) 12.5 mg, 15 mg, 20 mg and 30 mg also contain FD&C Yellow #6 Aluminum Lake as a color additive."
},
{
"NDCCode": "11534-193-03",
"PackageDescription": "1000 TABLET in 1 BOTTLE (11534-193-03) ",
"NDC11Code": "11534-0193-03",
"ProductNDC": "11534-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate And Amphetamine Sulfate",
"NonProprietaryName": "Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate And Amphetamine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180704",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209799",
"LabelerName": "SUNRISE PHARMACEUTICAL, INC.",
"SubstanceName": "DEXTROAMPHETAMINE SACCHARATE; AMPHETAMINE ASPARTATE MONOHYDRATE; DEXTROAMPHETAMINE SULFATE; AMPHETAMINE SULFATE",
"StrengthNumber": "3.125; 3.125; 3.125; 3.125",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180704",
"SamplePackage": "N",
"IndicationAndUsage": "Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) and Narcolepsy. Attention Deficit Hyperactivity Disorder (ADHD). A diagnosis of Attention Deficit Hyperactivity Disorder (ADHD; DSM-IV®) implies the presence of hyperactive-impulsive or inattentive symptoms that caused impairment and were present before age 7 years. The symptoms must cause clinically significant impairment, e.g., in social, academic, or occupational functioning, and be present in two or more settings, e.g., school (or work) and at home. The symptoms must not be better accounted for by another mental disorder. For the Inattentive Type, at least six of the following symptoms must have persisted for at least 6 months: lack of attention to details/careless mistakes; lack of sustained attention; poor listener; failure to follow through on tasks; poor organization; avoids tasks requiring sustained mental effort; loses things; easily distracted; forgetful. For the Hyperactive-Impulsive Type, at least six of the following symptoms must have persisted for at least 6 months: fidgeting/squirming; leaving seat; inappropriate running/climbing; difficulty with quiet activities; “on the go;” excessive talking; blurting answers; can't wait turn; intrusive. The Combined Type requires both inattentive and hyperactive-impulsive criteria to be met.",
"Description": "A single-entity amphetamine product combining the neutral sulfate salts of dextroamphetamine and amphetamine, with the dextro isomer of amphetamine saccharate and d, l-amphetamine aspartate monohydrate. Inactive Ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and pregelatinized starch (botanical source: maize). Colors. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) 5 mg, 7.5 mg and 10 mg also contain FD&C Blue #1 Aluminum Lake as a color additive. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) 12.5 mg, 15 mg, 20 mg and 30 mg also contain FD&C Yellow #6 Aluminum Lake as a color additive."
},
{
"NDCCode": "12634-193-95",
"PackageDescription": "5 TABLET, FILM COATED in 1 BOTTLE (12634-193-95)",
"NDC11Code": "12634-0193-95",
"ProductNDC": "12634-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Trazodone Hydrochloride",
"NonProprietaryName": "Trazodone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100530",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA072192",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "TRAZODONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Trazodone hydrochloride tablets USP are indicated for the treatment of major depressive disorder (MDD) in adults. The efficacy of trazodone hydrochloride tablets has been established in trials with the immediate release formulation of trazodone [see Clinical Studies (14)] .",
"Description": "Trazodone hydrochloride is a triazolopyridine. It is a white, odorless crystalline powder which is freely soluble in water. Chemical Name: 2-[3-[4-(3-chlorophenyl)-1-piperazinyl]propyl]-1,2,4-triazolo[4,3-a]pyridin-3(2 H)-one hydrochloride. Structural Formula. Molecular Formula: C 19H 22ClN 5OHCl. Molecular Weight: 408.32. Each tablet, for oral administration, contains 50 mg or 100 mg of trazodone hydrochloride, USP. In addition, each tablet contains hypromellose, lactose monohydrate, magnesium stearate, polydextrose, polyethylene glycol, povidone, pregelatinized corn starch, silicon dioxide, and titanium dioxide."
},
{
"NDCCode": "13630-0193-4",
"PackageDescription": "190 mL in 1 CAN (13630-0193-4) ",
"NDC11Code": "13630-0193-04",
"ProductNDC": "13630-0193",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hurley",
"ProprietaryNameSuffix": "Sunscreen Broad Spectrum Spf15",
"NonProprietaryName": "Avobenzone, Octisalate, Octocrylene",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200505",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Prime Packaging, Inc.",
"SubstanceName": "AVOBENZONE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "16.5; 41.2; 16.5",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2022-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200505",
"SamplePackage": "N"
},
{
"NDCCode": "14141-193-01",
"PackageDescription": "9 g in 1 JAR (14141-193-01) ",
"NDC11Code": "14141-0193-01",
"ProductNDC": "14141-193",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Clarite Makeup For A Cleaner Appearance Spf 30 370-c",
"NonProprietaryName": "Octinoxate, Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200324",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "BEL STAR S A",
"SubstanceName": "OCTINOXATE; ZINC OXIDE",
"StrengthNumber": "7.5; 7.84",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200324",
"SamplePackage": "N"
},
{
"NDCCode": "21130-193-12",
"PackageDescription": "354 mL in 1 BOTTLE (21130-193-12) ",
"NDC11Code": "21130-0193-12",
"ProductNDC": "21130-193",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Signature Care",
"ProprietaryNameSuffix": "Ultra Strength Stomach",
"NonProprietaryName": "Bismuth Subsalicylate",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20260202",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M008",
"LabelerName": "SAFEWAY",
"SubstanceName": "BISMUTH SUBSALICYLATE",
"StrengthNumber": "525",
"StrengthUnit": "mg/15mL",
"Pharm_Classes": "Bismuth [CS], Bismuth [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260202",
"SamplePackage": "N",
"IndicationAndUsage": "relieves: 1 ▪travelers’ diarrhea, 2 ▪diarrhea, 3 ▪upset stomach due to overindulgence in food and drink, including:, 4 ▪heartburn, 5 ▪indigestion, 6 ▪nausea, 7 ▪gas, 8 ▪belching, 9 ▪fullness."
},
{
"NDCCode": "23155-193-31",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (23155-193-31) / 4 mL in 1 VIAL, GLASS",
"NDC11Code": "23155-0193-31",
"ProductNDC": "23155-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colistimethate Sodium",
"NonProprietaryName": "Colistimethate Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202359",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "COLISTIMETHATE SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/4mL",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210909",
"SamplePackage": "N",
"IndicationAndUsage": "Colistimethate for Injection, USP is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Colistimethate for Injection, USP has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Colistimethate for Injection, USP may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Colistimethate for Injection, USP and other antibacterial drugs, Colistimethate for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Colistimethate for Injection, USP is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). The sodium content is approximately 0.158 mg (0.0069 mEq) Sodium per milligram of Colistin. Colistimethate for Injection, USP contains colistimethate sodium (equivalent to 150 mg colistin base activity per vial) as a white to pale yellow lyophilized cake. The color of the reconstituted solution is clear, pale yellow. Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The molecular formula is C58H105N16Na5O28S5 and the structural formula is represented below. Dbu is 2,4-diaminobutanoic acid; R is 5-methylheptyl in colistin A & 5-methylhexyl in colistin B."
},
{
"NDCCode": "23155-193-41",
"PackageDescription": "12 VIAL, GLASS in 1 CARTON (23155-193-41) / 4 mL in 1 VIAL, GLASS",
"NDC11Code": "23155-0193-41",
"ProductNDC": "23155-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colistimethate Sodium",
"NonProprietaryName": "Colistimethate Sodium",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20210909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202359",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "COLISTIMETHATE SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/4mL",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210909",
"SamplePackage": "N",
"IndicationAndUsage": "Colistimethate for Injection, USP is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Colistimethate for Injection, USP has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Colistimethate for Injection, USP may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Colistimethate for Injection, USP and other antibacterial drugs, Colistimethate for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Colistimethate for Injection, USP is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). The sodium content is approximately 0.158 mg (0.0069 mEq) Sodium per milligram of Colistin. Colistimethate for Injection, USP contains colistimethate sodium (equivalent to 150 mg colistin base activity per vial) as a white to pale yellow lyophilized cake. The color of the reconstituted solution is clear, pale yellow. Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The molecular formula is C58H105N16Na5O28S5 and the structural formula is represented below. Dbu is 2,4-diaminobutanoic acid; R is 5-methylheptyl in colistin A & 5-methylhexyl in colistin B."
},
{
"NDCCode": "24385-193-65",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (24385-193-65) > 15 TABLET in 1 BLISTER PACK",
"NDC11Code": "24385-0193-65",
"ProductNDC": "24385-193",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Womens Laxative",
"NonProprietaryName": "Bisacodyl",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100715",
"EndMarketingDate": "20220201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "AmerisourceBergen Drug Corporation (Good Neighbor Pharmacy) 24385",
"SubstanceName": "BISACODYL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Stimulant Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Deprecated",
"LastUpdate": "2022-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20100715",
"EndMarketingDatePackage": "20220201",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0193-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0193-2)</PackageDescription>
<NDC11Code>49288-0193-02</NDC11Code>
<ProductNDC>49288-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eucalyptus</ProprietaryName>
<NonProprietaryName>Eucalyptus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>EUCALYPTUS GLOBULUS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0193-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0193-5)</PackageDescription>
<NDC11Code>49288-0193-05</NDC11Code>
<ProductNDC>49288-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eucalyptus</ProprietaryName>
<NonProprietaryName>Eucalyptus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>EUCALYPTUS GLOBULUS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0193-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0193-1)</PackageDescription>
<NDC11Code>49288-0193-01</NDC11Code>
<ProductNDC>49288-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eucalyptus</ProprietaryName>
<NonProprietaryName>Eucalyptus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>EUCALYPTUS GLOBULUS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0193-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0193-3)</PackageDescription>
<NDC11Code>49288-0193-03</NDC11Code>
<ProductNDC>49288-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eucalyptus</ProprietaryName>
<NonProprietaryName>Eucalyptus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>EUCALYPTUS GLOBULUS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0193-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0193-4)</PackageDescription>
<NDC11Code>49288-0193-04</NDC11Code>
<ProductNDC>49288-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eucalyptus</ProprietaryName>
<NonProprietaryName>Eucalyptus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>EUCALYPTUS GLOBULUS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>15631-0193-5</NDCCode>
<PackageDescription>12500 PELLET in 1 PACKAGE (15631-0193-5) </PackageDescription>
<NDC11Code>15631-0193-05</NDC11Code>
<ProductNDC>15631-0193</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ferrum Picricum</ProprietaryName>
<NonProprietaryName>Ferrum Picricum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151025</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>FERRIC PICRATE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50090-0193-5</NDCCode>
<PackageDescription>5 TABLET in 1 BOTTLE, PLASTIC (50090-0193-5)</PackageDescription>
<NDC11Code>50090-0193-05</NDC11Code>
<ProductNDC>50090-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077749</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; and stiff-man syndrome. Oral diazepam may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The empirical formula is C16H13ClN2O and the molecular weight is 284.75. The structural formula is as follows. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: calcium stearate, colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate and microcrystalline cellulose with the following dyes: 5-mg tablets contain D&C Yellow #10 aluminum lake; 10-mg tablets contain FD&C Blue #1 aluminum lake. Diazepam 2-mg tablets contain no dye.</Description>
</NDC>
<NDC>
<NDCCode>51552-0193-5</NDCCode>
<PackageDescription>500 g in 1 CONTAINER (51552-0193-5)</PackageDescription>
<NDC11Code>51552-0193-05</NDC11Code>
<ProductNDC>51552-0193</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sodium Sulfite</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19980401</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Fagron Inc</LabelerName>
<SubstanceName>SODIUM SULFITE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>53499-0193-5</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 BOX (53499-0193-5) > 118 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>53499-0193-05</NDC11Code>
<ProductNDC>53499-0193</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cough And Bronchial With Zinc</ProprietaryName>
<NonProprietaryName>Antimony Pentasulfide, Bryonia Alba Root, Drosera Rotundifolia, Eucalyptus Globulus Leaf, Ipecac, Spongia Officinalis Skeleton, Roasted, Zinc Gluconate</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040701</StartMarketingDate>
<EndMarketingDate>20240430</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Schwabe North America, Inc</LabelerName>
<SubstanceName>ANTIMONY PENTASULFIDE; BRYONIA ALBA ROOT; DROSERA ROTUNDIFOLIA FLOWERING TOP; EUCALYPTUS GLOBULUS LEAF; IPECAC; SPONGIA OFFICINALIS SKELETON, ROASTED; ZINC GLUCONATE</SubstanceName>
<StrengthNumber>8; 3; 4; 3; 4; 3; 1</StrengthNumber>
<StrengthUnit>[hp_X]/237mL; [hp_X]/237mL; [hp_X]/237mL; [hp_X]/237mL; [hp_X]/237mL; [hp_X]/237mL; [hp_X]/237mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20040701</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily relieves cough due to minor throat and bronchial irritation as may occur with a cold. Helps loosen phlegm (mucus) and thin bronchial secretions to drain bronchial tubes.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>58988-0193-5</NDCCode>
<PackageDescription>1 BOTTLE in 1 BOX (58988-0193-5) > 30 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>58988-0193-05</NDC11Code>
<ProductNDC>58988-0193</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nasal Decongestant</ProprietaryName>
<NonProprietaryName>Oxymetazoline Hcl</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20131209</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Promex, LLC</LabelerName>
<SubstanceName>OXYMETAZOLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>temporarily relieves nasal congestion due to:. common cold. hay fever. upper respiratory allergies. sinusitis. reduces swelling of nasal passages; shrinks swollen membranes. temporarily restores freer breathing through the nose.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>66558-0193-5</NDCCode>
<PackageDescription>35 g in 1 JAR (66558-0193-5) </PackageDescription>
<NDC11Code>66558-0193-05</NDC11Code>
<ProductNDC>66558-0193</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Liraglutide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20210601</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>FRESENIUS KABI IPSUM SRL</LabelerName>
<SubstanceName>LIRAGLUTIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-05-15</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-JUN-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71335-0193-5</NDCCode>
<PackageDescription>40 TABLET in 1 BOTTLE (71335-0193-5) </PackageDescription>
<NDC11Code>71335-0193-05</NDC11Code>
<ProductNDC>71335-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040777</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2023-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0069-0193-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (0069-0193-01) </PackageDescription>
<NDC11Code>00069-0193-01</NDC11Code>
<ProductNDC>0069-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171218</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203341</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>0316-0193-16</NDCCode>
<PackageDescription>1 JAR in 1 CARTON (0316-0193-16) / 454 g in 1 JAR</PackageDescription>
<NDC11Code>00316-0193-16</NDC11Code>
<ProductNDC>0316-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone</ProprietaryName>
<NonProprietaryName>Hydrocortisone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080706</ApplicationNumber>
<LabelerName>Crown Laboratories</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topcial corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Hydrocortisone is a member of this class. Chemically hydrocortisone is pregn-4-ene-3, 20-dione, 11, 17, 21-trihydroxy-, (11β)-. Its molecular formula is C 21H 30O 5 and molecular weight is 362.47. Its structural formula is:. Each gram of Hydrocortisone Cream USP, 1% contains 10 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid. Each gram of Hydrocortisone Cream USP, 2.5% contains 25 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid.</Description>
</NDC>
<NDC>
<NDCCode>0316-0193-20</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0316-0193-20) / 20 g in 1 TUBE</PackageDescription>
<NDC11Code>00316-0193-20</NDC11Code>
<ProductNDC>0316-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone</ProprietaryName>
<NonProprietaryName>Hydrocortisone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080706</ApplicationNumber>
<LabelerName>Crown Laboratories</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topcial corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Hydrocortisone is a member of this class. Chemically hydrocortisone is pregn-4-ene-3, 20-dione, 11, 17, 21-trihydroxy-, (11β)-. Its molecular formula is C 21H 30O 5 and molecular weight is 362.47. Its structural formula is:. Each gram of Hydrocortisone Cream USP, 1% contains 10 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid. Each gram of Hydrocortisone Cream USP, 2.5% contains 25 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid.</Description>
</NDC>
<NDC>
<NDCCode>0316-0193-30</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0316-0193-30) / 30 g in 1 TUBE</PackageDescription>
<NDC11Code>00316-0193-30</NDC11Code>
<ProductNDC>0316-0193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone</ProprietaryName>
<NonProprietaryName>Hydrocortisone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080706</ApplicationNumber>
<LabelerName>Crown Laboratories</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topcial corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Hydrocortisone is a member of this class. Chemically hydrocortisone is pregn-4-ene-3, 20-dione, 11, 17, 21-trihydroxy-, (11β)-. Its molecular formula is C 21H 30O 5 and molecular weight is 362.47. Its structural formula is:. Each gram of Hydrocortisone Cream USP, 1% contains 10 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid. Each gram of Hydrocortisone Cream USP, 2.5% contains 25 mg hydrocortisone USP in a cream base consisting of purified water, cetyl alcohol, glycerin, stearyl alcohol, propylene glycol, sodium lauryl sulfate, cetyl palmitate and sorbic acid.</Description>
</NDC>
<NDC>
<NDCCode>10544-193-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (10544-193-60)</PackageDescription>
<NDC11Code>10544-0193-60</NDC11Code>
<ProductNDC>10544-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glipizide</ProprietaryName>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074223</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea [EPC],Sulfonylurea Compounds [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Glipizide tablets are indicated as an adjunct to diet for the control of hyperglycemia and its associated symptomatology in patients with non-insulin-dependent diabetes mellitus (NIDDM; type II), formerly known as maturity-onset diabetes, after an adequate trial of dietary therapy has proved unsatisfactory. In initiating treatment for non-insulin-dependent diabetes, diet should be emphasized as the primary form of treatment. Caloric restriction and weight loss are essential in the obese diabetic patient. Proper dietary management alone may be effective in controlling the blood glucose and symptoms of hyperglycemia. The importance of regular physical activity should also be stressed, and cardiovascular risk factors should be identified, and corrective measures taken where possible. If this treatment program fails to reduce symptoms and/or blood glucose, the use of an oral sulfonylurea or insulin should be considered. Use of glipizide must be viewed by both the physician and patient as a treatment in addition to diet, and not as a substitute for diet or as a convenient mechanism for avoiding dietary restraint. Furthermore, loss of blood glucose control on diet alone also may be transient, thus requiring only short-term administration of glipizide. During maintenance programs, glipizide should be discontinued if satisfactory lowering of blood glucose is no longer achieved. Judgements should be based on regular clinical and laboratory evaluations. In considering the use of glipizide in asymptomatic patients, it should be recognized that controlling the blood glucose in non-insulin-dependent diabetes has not been definitely established to be effective in preventing the long-term cardiovascular or neural complications of diabetes.</IndicationAndUsage>
<Description>Glipizide is an oral blood-glucose-lowering drug of the sulfonylurea class. The Chemical Abstracts name of glipizide is 1-Cyclohexyl-3-[[ p-[2-(5-methylpyrazinecarboxamido)-ethyl]phenyl]sulfonyl]urea. The molecular formula is C 21H 27N 5O 4S; the molecular weight is 445.54; the structural formula is shown below:. Glipizide is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 N NaOH; it is freely soluble in dimethylformamide. Each tablet, for oral administration, contains 5 mg or 10 mg glipizide. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide; croscarmellose sodium; lactose anhydrous; microcrystalline cellulose; pregelatinized starch and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>10702-193-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (10702-193-01) </PackageDescription>
<NDC11Code>10702-0193-01</NDC11Code>
<ProductNDC>10702-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209036</ApplicationNumber>
<LabelerName>KVK-Tech, Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see WARNINGS], reserve opioid analgesics, including hydrocodone bitartrate for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Hydrocodone bitartrate and acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4´-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/300 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/300 mg, 7.5 mg/300 mg and 10 mg/300 mg: This product complies with USP dissolution test 2. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/325 mg, 7.5 mg/325 mg and 10 mg/325 mg: This product complies with USP dissolution test 1.</Description>
</NDC>
<NDC>
<NDCCode>10702-193-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (10702-193-03) </PackageDescription>
<NDC11Code>10702-0193-03</NDC11Code>
<ProductNDC>10702-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209036</ApplicationNumber>
<LabelerName>KVK-Tech, Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see WARNINGS], reserve opioid analgesics, including hydrocodone bitartrate for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Hydrocodone bitartrate and acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4´-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/300 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/300 mg, 7.5 mg/300 mg and 10 mg/300 mg: This product complies with USP dissolution test 2. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/325 mg, 7.5 mg/325 mg and 10 mg/325 mg: This product complies with USP dissolution test 1.</Description>
</NDC>
<NDC>
<NDCCode>10702-193-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (10702-193-10) </PackageDescription>
<NDC11Code>10702-0193-10</NDC11Code>
<ProductNDC>10702-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209036</ApplicationNumber>
<LabelerName>KVK-Tech, Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see WARNINGS], reserve opioid analgesics, including hydrocodone bitartrate for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Hydrocodone bitartrate and acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4´-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/300 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/300 mg, 7.5 mg/300 mg and 10 mg/300 mg: This product complies with USP dissolution test 2. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/325 mg, 7.5 mg/325 mg and 10 mg/325 mg: This product complies with USP dissolution test 1.</Description>
</NDC>
<NDC>
<NDCCode>10702-193-50</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (10702-193-50) </PackageDescription>
<NDC11Code>10702-0193-50</NDC11Code>
<ProductNDC>10702-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170622</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209036</ApplicationNumber>
<LabelerName>KVK-Tech, Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see WARNINGS], reserve opioid analgesics, including hydrocodone bitartrate for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Hydrocodone bitartrate and acetaminophen is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4´-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/300 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/300 mg contains:. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .300 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 5 mg Acetaminophen. . . . . . . . . . . . . .325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 7.5 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . .7.5 mg Acetaminophen. . . . . . . . . . . . . . 325 mg. Each Hydrocodone Bitartrate and Acetaminophen Tablet, USP 10 mg/325 mg contains. Hydrocodone Bitartrate. . . . . . . . 10 mg Acetaminophen. . . . . . . . . . . . . .325 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, and stearic acid. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/300 mg, 7.5 mg/300 mg and 10 mg/300 mg: This product complies with USP dissolution test 2. Hydrocodone Bitartrate and Acetaminophen Tablets, USP 5 mg/325 mg, 7.5 mg/325 mg and 10 mg/325 mg: This product complies with USP dissolution test 1.</Description>
</NDC>
<NDC>
<NDCCode>11534-193-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (11534-193-01) </PackageDescription>
<NDC11Code>11534-0193-01</NDC11Code>
<ProductNDC>11534-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate And Amphetamine Sulfate</ProprietaryName>
<NonProprietaryName>Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate And Amphetamine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180704</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209799</ApplicationNumber>
<LabelerName>SUNRISE PHARMACEUTICAL, INC.</LabelerName>
<SubstanceName>DEXTROAMPHETAMINE SACCHARATE; AMPHETAMINE ASPARTATE MONOHYDRATE; DEXTROAMPHETAMINE SULFATE; AMPHETAMINE SULFATE</SubstanceName>
<StrengthNumber>3.125; 3.125; 3.125; 3.125</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180704</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) and Narcolepsy. Attention Deficit Hyperactivity Disorder (ADHD). A diagnosis of Attention Deficit Hyperactivity Disorder (ADHD; DSM-IV®) implies the presence of hyperactive-impulsive or inattentive symptoms that caused impairment and were present before age 7 years. The symptoms must cause clinically significant impairment, e.g., in social, academic, or occupational functioning, and be present in two or more settings, e.g., school (or work) and at home. The symptoms must not be better accounted for by another mental disorder. For the Inattentive Type, at least six of the following symptoms must have persisted for at least 6 months: lack of attention to details/careless mistakes; lack of sustained attention; poor listener; failure to follow through on tasks; poor organization; avoids tasks requiring sustained mental effort; loses things; easily distracted; forgetful. For the Hyperactive-Impulsive Type, at least six of the following symptoms must have persisted for at least 6 months: fidgeting/squirming; leaving seat; inappropriate running/climbing; difficulty with quiet activities; “on the go;” excessive talking; blurting answers; can't wait turn; intrusive. The Combined Type requires both inattentive and hyperactive-impulsive criteria to be met.</IndicationAndUsage>
<Description>A single-entity amphetamine product combining the neutral sulfate salts of dextroamphetamine and amphetamine, with the dextro isomer of amphetamine saccharate and d, l-amphetamine aspartate monohydrate. Inactive Ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and pregelatinized starch (botanical source: maize). Colors. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) 5 mg, 7.5 mg and 10 mg also contain FD&C Blue #1 Aluminum Lake as a color additive. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) 12.5 mg, 15 mg, 20 mg and 30 mg also contain FD&C Yellow #6 Aluminum Lake as a color additive.</Description>
</NDC>
<NDC>
<NDCCode>11534-193-03</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (11534-193-03) </PackageDescription>
<NDC11Code>11534-0193-03</NDC11Code>
<ProductNDC>11534-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate And Amphetamine Sulfate</ProprietaryName>
<NonProprietaryName>Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate And Amphetamine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180704</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209799</ApplicationNumber>
<LabelerName>SUNRISE PHARMACEUTICAL, INC.</LabelerName>
<SubstanceName>DEXTROAMPHETAMINE SACCHARATE; AMPHETAMINE ASPARTATE MONOHYDRATE; DEXTROAMPHETAMINE SULFATE; AMPHETAMINE SULFATE</SubstanceName>
<StrengthNumber>3.125; 3.125; 3.125; 3.125</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180704</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) and Narcolepsy. Attention Deficit Hyperactivity Disorder (ADHD). A diagnosis of Attention Deficit Hyperactivity Disorder (ADHD; DSM-IV®) implies the presence of hyperactive-impulsive or inattentive symptoms that caused impairment and were present before age 7 years. The symptoms must cause clinically significant impairment, e.g., in social, academic, or occupational functioning, and be present in two or more settings, e.g., school (or work) and at home. The symptoms must not be better accounted for by another mental disorder. For the Inattentive Type, at least six of the following symptoms must have persisted for at least 6 months: lack of attention to details/careless mistakes; lack of sustained attention; poor listener; failure to follow through on tasks; poor organization; avoids tasks requiring sustained mental effort; loses things; easily distracted; forgetful. For the Hyperactive-Impulsive Type, at least six of the following symptoms must have persisted for at least 6 months: fidgeting/squirming; leaving seat; inappropriate running/climbing; difficulty with quiet activities; “on the go;” excessive talking; blurting answers; can't wait turn; intrusive. The Combined Type requires both inattentive and hyperactive-impulsive criteria to be met.</IndicationAndUsage>
<Description>A single-entity amphetamine product combining the neutral sulfate salts of dextroamphetamine and amphetamine, with the dextro isomer of amphetamine saccharate and d, l-amphetamine aspartate monohydrate. Inactive Ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose and pregelatinized starch (botanical source: maize). Colors. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) 5 mg, 7.5 mg and 10 mg also contain FD&C Blue #1 Aluminum Lake as a color additive. Dextroamphetamine Saccharate, Amphetamine Aspartate, Dextroamphetamine Sulfate and Amphetamine Sulfate Tablets (Mixed Salts of a Single Amphetamine Product) 12.5 mg, 15 mg, 20 mg and 30 mg also contain FD&C Yellow #6 Aluminum Lake as a color additive.</Description>
</NDC>
<NDC>
<NDCCode>12634-193-95</NDCCode>
<PackageDescription>5 TABLET, FILM COATED in 1 BOTTLE (12634-193-95)</PackageDescription>
<NDC11Code>12634-0193-95</NDC11Code>
<ProductNDC>12634-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Trazodone Hydrochloride</ProprietaryName>
<NonProprietaryName>Trazodone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100530</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA072192</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>TRAZODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Trazodone hydrochloride tablets USP are indicated for the treatment of major depressive disorder (MDD) in adults. The efficacy of trazodone hydrochloride tablets has been established in trials with the immediate release formulation of trazodone [see Clinical Studies (14)] .</IndicationAndUsage>
<Description>Trazodone hydrochloride is a triazolopyridine. It is a white, odorless crystalline powder which is freely soluble in water. Chemical Name: 2-[3-[4-(3-chlorophenyl)-1-piperazinyl]propyl]-1,2,4-triazolo[4,3-a]pyridin-3(2 H)-one hydrochloride. Structural Formula. Molecular Formula: C 19H 22ClN 5OHCl. Molecular Weight: 408.32. Each tablet, for oral administration, contains 50 mg or 100 mg of trazodone hydrochloride, USP. In addition, each tablet contains hypromellose, lactose monohydrate, magnesium stearate, polydextrose, polyethylene glycol, povidone, pregelatinized corn starch, silicon dioxide, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>13630-0193-4</NDCCode>
<PackageDescription>190 mL in 1 CAN (13630-0193-4) </PackageDescription>
<NDC11Code>13630-0193-04</NDC11Code>
<ProductNDC>13630-0193</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hurley</ProprietaryName>
<ProprietaryNameSuffix>Sunscreen Broad Spectrum Spf15</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Octisalate, Octocrylene</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200505</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Prime Packaging, Inc.</LabelerName>
<SubstanceName>AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>16.5; 41.2; 16.5</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200505</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>14141-193-01</NDCCode>
<PackageDescription>9 g in 1 JAR (14141-193-01) </PackageDescription>
<NDC11Code>14141-0193-01</NDC11Code>
<ProductNDC>14141-193</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Clarite Makeup For A Cleaner Appearance Spf 30 370-c</ProprietaryName>
<NonProprietaryName>Octinoxate, Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200324</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>BEL STAR S A</LabelerName>
<SubstanceName>OCTINOXATE; ZINC OXIDE</SubstanceName>
<StrengthNumber>7.5; 7.84</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>21130-193-12</NDCCode>
<PackageDescription>354 mL in 1 BOTTLE (21130-193-12) </PackageDescription>
<NDC11Code>21130-0193-12</NDC11Code>
<ProductNDC>21130-193</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Signature Care</ProprietaryName>
<ProprietaryNameSuffix>Ultra Strength Stomach</ProprietaryNameSuffix>
<NonProprietaryName>Bismuth Subsalicylate</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260202</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M008</ApplicationNumber>
<LabelerName>SAFEWAY</LabelerName>
<SubstanceName>BISMUTH SUBSALICYLATE</SubstanceName>
<StrengthNumber>525</StrengthNumber>
<StrengthUnit>mg/15mL</StrengthUnit>
<Pharm_Classes>Bismuth [CS], Bismuth [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves: 1 ▪travelers’ diarrhea, 2 ▪diarrhea, 3 ▪upset stomach due to overindulgence in food and drink, including:, 4 ▪heartburn, 5 ▪indigestion, 6 ▪nausea, 7 ▪gas, 8 ▪belching, 9 ▪fullness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>23155-193-31</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (23155-193-31) / 4 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>23155-0193-31</NDC11Code>
<ProductNDC>23155-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colistimethate Sodium</ProprietaryName>
<NonProprietaryName>Colistimethate Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202359</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>COLISTIMETHATE SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/4mL</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Colistimethate for Injection, USP is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Colistimethate for Injection, USP has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Colistimethate for Injection, USP may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Colistimethate for Injection, USP and other antibacterial drugs, Colistimethate for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Colistimethate for Injection, USP is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). The sodium content is approximately 0.158 mg (0.0069 mEq) Sodium per milligram of Colistin. Colistimethate for Injection, USP contains colistimethate sodium (equivalent to 150 mg colistin base activity per vial) as a white to pale yellow lyophilized cake. The color of the reconstituted solution is clear, pale yellow. Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The molecular formula is C58H105N16Na5O28S5 and the structural formula is represented below. Dbu is 2,4-diaminobutanoic acid; R is 5-methylheptyl in colistin A & 5-methylhexyl in colistin B.</Description>
</NDC>
<NDC>
<NDCCode>23155-193-41</NDCCode>
<PackageDescription>12 VIAL, GLASS in 1 CARTON (23155-193-41) / 4 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>23155-0193-41</NDC11Code>
<ProductNDC>23155-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colistimethate Sodium</ProprietaryName>
<NonProprietaryName>Colistimethate Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20210909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202359</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>COLISTIMETHATE SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/4mL</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Colistimethate for Injection, USP is indicated for the treatment of acute or chronic infections due to sensitive strains of certain gram-negative bacilli. It is particularly indicated when the infection is caused by sensitive strains of Pseudomonas aeruginosa. This antibiotic is not indicated for infections due to Proteus or Neisseria. Colistimethate for Injection, USP has proven clinically effective in treatment of infections due to the following gram-negative organisms: Enterobacter aerogenes, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. Colistimethate for Injection, USP may be used to initiate therapy in serious infections that are suspected to be due to gram-negative organisms and in the treatment of infections due to susceptible gram-negative pathogenic bacilli. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Colistimethate for Injection, USP and other antibacterial drugs, Colistimethate for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Colistimethate for Injection, USP is a sterile parenteral antibiotic product which, when reconstituted (see Reconstitution), is suitable for intramuscular or intravenous administration. Each vial contains colistimethate sodium or pentasodium colistinmethanesulfonate (150 mg colistin base activity). The sodium content is approximately 0.158 mg (0.0069 mEq) Sodium per milligram of Colistin. Colistimethate for Injection, USP contains colistimethate sodium (equivalent to 150 mg colistin base activity per vial) as a white to pale yellow lyophilized cake. The color of the reconstituted solution is clear, pale yellow. Colistimethate sodium is a polypeptide antibiotic with an approximate molecular weight of 1750. The molecular formula is C58H105N16Na5O28S5 and the structural formula is represented below. Dbu is 2,4-diaminobutanoic acid; R is 5-methylheptyl in colistin A & 5-methylhexyl in colistin B.</Description>
</NDC>
<NDC>
<NDCCode>24385-193-65</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (24385-193-65) > 15 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>24385-0193-65</NDC11Code>
<ProductNDC>24385-193</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Womens Laxative</ProprietaryName>
<NonProprietaryName>Bisacodyl</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100715</StartMarketingDate>
<EndMarketingDate>20220201</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>AmerisourceBergen Drug Corporation (Good Neighbor Pharmacy) 24385</LabelerName>
<SubstanceName>BISACODYL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Stimulant Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20100715</StartMarketingDatePackage>
<EndMarketingDatePackage>20220201</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>