{
"NDC": [
{
"NDCCode": "49288-0239-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0239-3)",
"NDC11Code": "49288-0239-03",
"ProductNDC": "49288-0239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"NonProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19970613",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102226",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN",
"StrengthNumber": "1667; 16667; 16667; 16667; 16667; .0083",
"StrengthUnit": "[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.",
"Description": "DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection."
},
{
"NDCCode": "49288-0239-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0239-4)",
"NDC11Code": "49288-0239-04",
"ProductNDC": "49288-0239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"NonProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19970613",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102226",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN",
"StrengthNumber": "1667; 16667; 16667; 16667; 16667; .0083",
"StrengthUnit": "[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.",
"Description": "DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection."
},
{
"NDCCode": "49288-0239-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0239-5)",
"NDC11Code": "49288-0239-05",
"ProductNDC": "49288-0239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"NonProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19970613",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102226",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN",
"StrengthNumber": "1667; 16667; 16667; 16667; 16667; .0083",
"StrengthUnit": "[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.",
"Description": "DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection."
},
{
"NDCCode": "15631-0239-3",
"PackageDescription": "750 PELLET in 1 PACKAGE (15631-0239-3) ",
"NDC11Code": "15631-0239-03",
"ProductNDC": "15631-0239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Iris Tenax",
"NonProprietaryName": "Iris Tenax",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150902",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "IRIS TENAX",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "37662-0239-3",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (37662-0239-3) ",
"NDC11Code": "37662-0239-03",
"ProductNDC": "37662-0239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Chelidonium Majus",
"NonProprietaryName": "Chelidonium Majus",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220531",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "CHELIDONIUM MAJUS",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220531",
"SamplePackage": "N"
},
{
"NDCCode": "38779-0239-3",
"PackageDescription": "5 g in 1 VIAL (38779-0239-3)",
"NDC11Code": "38779-0239-03",
"ProductNDC": "38779-0239",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Miconazole",
"DosageFormName": "POWDER",
"StartMarketingDate": "20150805",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Medisca Inc.",
"SubstanceName": "MICONAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20221231"
},
{
"NDCCode": "51552-0239-3",
"PackageDescription": "10000 g in 1 CONTAINER (51552-0239-3) ",
"NDC11Code": "51552-0239-03",
"ProductNDC": "51552-0239",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Petrolatum",
"DosageFormName": "GEL",
"StartMarketingDate": "19980401",
"EndMarketingDate": "20240812",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Fagron Inc",
"SubstanceName": "PETROLATUM",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "12-OCT-16",
"EndMarketingDatePackage": "12-AUG-24"
},
{
"NDCCode": "54569-0239-3",
"PackageDescription": "20 CAPSULE in 1 BOTTLE (54569-0239-3)",
"NDC11Code": "54569-0239-03",
"ProductNDC": "54569-0239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Diphenhydramine Hydrochloride",
"NonProprietaryName": "Diphenhydramine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20070524",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "A-S Medication Solutions LLC",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "58118-0239-3",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (58118-0239-3)",
"NDC11Code": "58118-0239-03",
"ProductNDC": "58118-0239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077995",
"LabelerName": "Clinical Solutions Wholesale",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "58443-0239-3",
"PackageDescription": "89 mL in 1 TUBE (58443-0239-3) ",
"NDC11Code": "58443-0239-03",
"ProductNDC": "58443-0239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Australian Gold",
"ProprietaryNameSuffix": "Botanical Tinted Face Mineral Sunscreen Broad Spectrum Spf 50",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160715",
"EndMarketingDate": "20231031",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "M020",
"LabelerName": "Prime Enterprises Inc.",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "43.04; 43.04",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2023-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160715",
"EndMarketingDatePackage": "20231031",
"SamplePackage": "N"
},
{
"NDCCode": "64778-0239-3",
"PackageDescription": "12 BOTTLE, PLASTIC in 1 CASE (64778-0239-3) > 480 mL in 1 BOTTLE, PLASTIC (64778-0239-1) ",
"NDC11Code": "64778-0239-03",
"ProductNDC": "64778-0239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neutral Sodium Fluoride",
"NonProprietaryName": "Sodium Fluoride",
"DosageFormName": "GEL",
"RouteName": "DENTAL",
"StartMarketingDate": "20170223",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "AMD Medicom Inc.",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": ".02",
"StrengthUnit": "g/mL",
"Status": "Deprecated",
"LastUpdate": "2023-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20171201",
"SamplePackage": "N"
},
{
"NDCCode": "69968-0239-3",
"PackageDescription": "1500 mL in 1 BOTTLE, PLASTIC (69968-0239-3) ",
"NDC11Code": "69968-0239-03",
"ProductNDC": "69968-0239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Listerine Freshburst Antiseptic",
"NonProprietaryName": "Eucalyptol, Menthol, Unspecified Form, Methyl Salicylate, And Thymol",
"DosageFormName": "MOUTHWASH",
"RouteName": "ORAL",
"StartMarketingDate": "20180817",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M022",
"LabelerName": "Kenvue Brands LLC",
"SubstanceName": "EUCALYPTOL; MENTHOL, UNSPECIFIED FORM; METHYL SALICYLATE; THYMOL",
"StrengthNumber": ".92; .42; .6; .64",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2024-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180828",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent and reduce: 1 plaque, 2 gingivitis."
},
{
"NDCCode": "69968-0239-8",
"PackageDescription": "2 BOTTLE, PLASTIC in 1 PACKAGE (69968-0239-8) > 1500 mL in 1 BOTTLE, PLASTIC (69968-0239-3) ",
"NDC11Code": "69968-0239-08",
"ProductNDC": "69968-0239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Listerine Freshburst Antiseptic",
"NonProprietaryName": "Eucalyptol, Menthol, Unspecified Form, Methyl Salicylate, And Thymol",
"DosageFormName": "MOUTHWASH",
"RouteName": "ORAL",
"StartMarketingDate": "20180817",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part356",
"LabelerName": "Johnson & Johnson Consumer Inc.",
"SubstanceName": "EUCALYPTOL; MENTHOL, UNSPECIFIED FORM; METHYL SALICYLATE; THYMOL",
"StrengthNumber": ".92; .42; .6; .64",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2023-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200424",
"EndMarketingDatePackage": "20231011",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent and reduce: 1 plaque, 2 gingivitis."
},
{
"NDCCode": "71335-0239-3",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71335-0239-3) ",
"NDC11Code": "71335-0239-03",
"ProductNDC": "71335-0239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20151026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203849",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220209",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine sulfate extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations [see Warnings and Precautions (5.1)], reserve morphine sulfate extended-release for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Morphine sulfate extended-release tablets are for oral use and contain morphine sulfate, USP an opioid agonist. Each tablet contains the following inactive ingredients common to all strengths: anhydrous lactose, cetostearyl alcohol, hydroxyethyl cellulose, magnesium stearate, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. The 30 mg tablets also contain yellow iron oxide. The 60 mg tablets also contain red iron oxide. The 100 mg and 200 mg tablets also contain red iron oxide and yellow iron oxide. The tablet strengths, 15 mg, 30 mg, 60 mg, 100 mg, and 200 mg, describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate). Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. Morphine sulfate, USP is soluble in water and ethanol. 1 g dissolves in 15.5 mL of water at 25°C and 1 g dissolves in 565 mL of ethanol at 25°C. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its molecular weight is 758.83 and its structural formula is."
},
{
"NDCCode": "80425-0239-1",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (80425-0239-1) / 3 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "80425-0239-01",
"ProductNDC": "80425-0239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Moxifloxacin",
"NonProprietaryName": "Moxifloxacin",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20230111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090080",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "MOXIFLOXACIN HYDROCHLORIDE MONOHYDRATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230111",
"SamplePackage": "N",
"IndicationAndUsage": "Moxifloxacin ophthalmic solution is indicated for the treatment of bacterial conjunctivitis caused by susceptible strains of the following organisms. Corynebacterium species* Micrococcus luteus* Staphylococcus aureus Staphylococcus epidermidis Staphylococcus haemolyticus Staphylococcus hominis Staphylococcus warneri* Streptococcus pneumoniae Streptococcus viridans group Acinetobacter lwoffii* Haemophilus influenza Haemophilus parainfluenzae* Chlamydia trachomatis. *Efficacy for this organism was studied in fewer than 10 infections.",
"Description": "Moxifloxacin ophthalmic solution, USP 0.5% is a sterile solution for topical ophthalmic use. Moxifloxacin hydrochloride is an 8-methoxy fluoroquinolone anti-infective, with a diazabicyclononyl ring at the C7 position. Chemical Name: 1-Cyclopropyl-6-fluoro-1,4-dihydro-8-methoxy-7-[(4aS,7aS)-octahydro-6H-pyrrolol[3,4-b]pyridin-6-yl]-4-oxo-3-quinoline carboxylic acid, monohydrochloride monohydrate. Moxifloxacin hydrochloride monohydrate is a light yellow or yellow powder or crystals. Each mL of moxifloxacin ophthalmic solution, USP contains 5.45 mg moxifloxacin hydrochloride, equivalent to 5 mg moxifloxacin base. Contains: Active: Moxifloxacin 0.5% (5 mg/mL); Inactives: Boric acid, sodium chloride, sodium hydroxide and water for injection. May also contain hydrochloric acid and/or additional sodium hydroxide to adjust pH to approximately 6.8. Moxifloxacin ophthalmic solution, USP is an isotonic solution with an osmolality of approximately 290 mOsm/kg."
},
{
"NDCCode": "10544-239-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (10544-239-30)",
"NDC11Code": "10544-0239-30",
"ProductNDC": "10544-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077321",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lisinopril tablets are indicated for the treatment of hypertension. They may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5·2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch. 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, red iron oxide, starch. 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch, yellow iron oxide."
},
{
"NDCCode": "10544-239-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (10544-239-60)",
"NDC11Code": "10544-0239-60",
"ProductNDC": "10544-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091216",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077321",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lisinopril tablets are indicated for the treatment of hypertension. They may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5·2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch. 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, red iron oxide, starch. 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch, yellow iron oxide."
},
{
"NDCCode": "11014-0239-1",
"PackageDescription": "1 BAG in 1 CONTAINER (11014-0239-1) > 967000 CAPSULE in 1 BAG",
"NDC11Code": "11014-0239-01",
"ProductNDC": "11014-0239",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Mixed Salts Of A Single Entity Amphetamine Product Er Capsules, 15 Mg",
"DosageFormName": "CAPSULE",
"StartMarketingDate": "20160216",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Catalent Pharma Solutions, LLC",
"SubstanceName": "AMPHETAMINE ASPARTATE MONOHYDRATE; AMPHETAMINE SULFATE; DEXTROAMPHETAMINE SACCHARATE; DEXTROAMPHETAMINE SULFATE",
"StrengthNumber": "3.75; 3.75; 3.75; 3.75",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "16-FEB-16"
},
{
"NDCCode": "13709-239-01",
"PackageDescription": "90 g in 1 CAN (13709-239-01) ",
"NDC11Code": "13709-0239-01",
"ProductNDC": "13709-239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Neilmed Anti-itch",
"NonProprietaryName": "Anti-itch Spray",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201111",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "NeilMed Pharmaceuticals Inc.",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201111",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily alleviates itching associated with minor skin irritation, inflammation and rashes due to: 1 Eczema , , 2 Poison ivy, oak and sumac, 3 Cosmetics, 4 Psoriasis, 5 Soaps and detergents, 6 Jewelry, 7 Insect bites, 8 Seborrheic dermatitis."
},
{
"NDCCode": "21695-239-03",
"PackageDescription": "3 TABLET in 1 BOTTLE (21695-239-03)",
"NDC11Code": "21695-0239-03",
"ProductNDC": "21695-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071194",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF."
},
{
"NDCCode": "21695-239-15",
"PackageDescription": "15 TABLET in 1 BOTTLE (21695-239-15)",
"NDC11Code": "21695-0239-15",
"ProductNDC": "21695-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071194",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF."
},
{
"NDCCode": "21695-239-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (21695-239-30)",
"NDC11Code": "21695-0239-30",
"ProductNDC": "21695-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071194",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF."
},
{
"NDCCode": "21695-239-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (21695-239-60)",
"NDC11Code": "21695-0239-60",
"ProductNDC": "21695-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071194",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF."
},
{
"NDCCode": "21695-239-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (21695-239-90)",
"NDC11Code": "21695-0239-90",
"ProductNDC": "21695-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071194",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF."
},
{
"NDCCode": "24979-239-07",
"PackageDescription": "90 TABLET in 1 BOTTLE (24979-239-07) ",
"NDC11Code": "24979-0239-07",
"ProductNDC": "24979-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zestril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240425",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019777",
"LabelerName": "Upsher-Smith Laboratories, LLC",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-05-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240425",
"SamplePackage": "N",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Zestril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - calcium phosphate, magnesium stearate, mannitol, starch. 5 mg, 10 mg, 20 mg and 30 mg tablets - calcium phosphate, magnesium stearate, mannitol, red ferric oxide, starch. 40 mg tablets - calcium phosphate, magnesium stearate, mannitol, starch, yellow ferric oxide."
},
{
"NDCCode": "25021-239-05",
"PackageDescription": "1 VIAL in 1 CARTON (25021-239-05) / 5.26 mL in 1 VIAL",
"NDC11Code": "25021-0239-05",
"ProductNDC": "25021-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemcitabine",
"NonProprietaryName": "Gemcitabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209077",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "38",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190115",
"SamplePackage": "N",
"IndicationAndUsage": "Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .",
"Description": "Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "25021-239-26",
"PackageDescription": "1 VIAL in 1 CARTON (25021-239-26) / 26.3 mL in 1 VIAL",
"NDC11Code": "25021-0239-26",
"ProductNDC": "25021-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemcitabine",
"NonProprietaryName": "Gemcitabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209077",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "38",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190115",
"SamplePackage": "N",
"IndicationAndUsage": "Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .",
"Description": "Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "25021-239-52",
"PackageDescription": "1 VIAL in 1 CARTON (25021-239-52) / 52.6 mL in 1 VIAL",
"NDC11Code": "25021-0239-52",
"ProductNDC": "25021-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemcitabine",
"NonProprietaryName": "Gemcitabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209077",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "38",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190115",
"SamplePackage": "N",
"IndicationAndUsage": "Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .",
"Description": "Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "27808-239-01",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (27808-239-01) ",
"NDC11Code": "27808-0239-01",
"ProductNDC": "27808-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20210715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214322",
"LabelerName": "Tris Pharma Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2024-06-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220201",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with microcrystalline cellulose and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the caramel capsule shells contain red iron oxide. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide."
},
{
"NDCCode": "29300-239-05",
"PackageDescription": "500 TABLET in 1 BOTTLE, PLASTIC (29300-239-05) ",
"NDC11Code": "29300-0239-05",
"ProductNDC": "29300-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200805",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205399",
"LabelerName": "Unichem Pharmaceuticals (USA), Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2020-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200805",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.",
"Description": "Tolterodine tartrate tablets contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). The empirical formula of tolterodine tartrate is C26H37NO7, and its molecular weight is 475.6. The structural formula of tolterodine tartrate is represented below. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 14.7657 mg/mL. It is sparingly soluble in water, slightly soluble in anhydrous ethanol, practically insoluble in heptane. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate tablets for oral administration contain 1 or 2 mg of tolterodine tartrate. The inactive ingredients are microcrystalline cellulose, dibasic calcium phosphate dihydrate, sodium starch glycolate type B (pH 3.0 to 5.0), colloidal silicon dioxide, magnesium stearate, hypromellose, stearic acid, and titanium dioxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0239-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0239-3)</PackageDescription>
<NDC11Code>49288-0239-03</NDC11Code>
<ProductNDC>49288-0239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</ProprietaryName>
<NonProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970613</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102226</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN</SubstanceName>
<StrengthNumber>1667; 16667; 16667; 16667; 16667; .0083</StrengthNumber>
<StrengthUnit>[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.</IndicationAndUsage>
<Description>DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>49288-0239-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0239-4)</PackageDescription>
<NDC11Code>49288-0239-04</NDC11Code>
<ProductNDC>49288-0239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</ProprietaryName>
<NonProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970613</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102226</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN</SubstanceName>
<StrengthNumber>1667; 16667; 16667; 16667; 16667; .0083</StrengthNumber>
<StrengthUnit>[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.</IndicationAndUsage>
<Description>DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>49288-0239-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0239-5)</PackageDescription>
<NDC11Code>49288-0239-05</NDC11Code>
<ProductNDC>49288-0239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</ProprietaryName>
<NonProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970613</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102226</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN</SubstanceName>
<StrengthNumber>1667; 16667; 16667; 16667; 16667; .0083</StrengthNumber>
<StrengthUnit>[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.</IndicationAndUsage>
<Description>DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>15631-0239-3</NDCCode>
<PackageDescription>750 PELLET in 1 PACKAGE (15631-0239-3) </PackageDescription>
<NDC11Code>15631-0239-03</NDC11Code>
<ProductNDC>15631-0239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Iris Tenax</ProprietaryName>
<NonProprietaryName>Iris Tenax</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150902</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>IRIS TENAX</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37662-0239-3</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (37662-0239-3) </PackageDescription>
<NDC11Code>37662-0239-03</NDC11Code>
<ProductNDC>37662-0239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Chelidonium Majus</ProprietaryName>
<NonProprietaryName>Chelidonium Majus</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220531</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>CHELIDONIUM MAJUS</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>38779-0239-3</NDCCode>
<PackageDescription>5 g in 1 VIAL (38779-0239-3)</PackageDescription>
<NDC11Code>38779-0239-03</NDC11Code>
<ProductNDC>38779-0239</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Miconazole</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20150805</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>MICONAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51552-0239-3</NDCCode>
<PackageDescription>10000 g in 1 CONTAINER (51552-0239-3) </PackageDescription>
<NDC11Code>51552-0239-03</NDC11Code>
<ProductNDC>51552-0239</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Petrolatum</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<StartMarketingDate>19980401</StartMarketingDate>
<EndMarketingDate>20240812</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Fagron Inc</LabelerName>
<SubstanceName>PETROLATUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>12-OCT-16</StartMarketingDatePackage>
<EndMarketingDatePackage>12-AUG-24</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>54569-0239-3</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE (54569-0239-3)</PackageDescription>
<NDC11Code>54569-0239-03</NDC11Code>
<ProductNDC>54569-0239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Diphenhydramine Hydrochloride</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070524</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>A-S Medication Solutions LLC</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>58118-0239-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (58118-0239-3)</PackageDescription>
<NDC11Code>58118-0239-03</NDC11Code>
<ProductNDC>58118-0239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077995</ApplicationNumber>
<LabelerName>Clinical Solutions Wholesale</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>58443-0239-3</NDCCode>
<PackageDescription>89 mL in 1 TUBE (58443-0239-3) </PackageDescription>
<NDC11Code>58443-0239-03</NDC11Code>
<ProductNDC>58443-0239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Australian Gold</ProprietaryName>
<ProprietaryNameSuffix>Botanical Tinted Face Mineral Sunscreen Broad Spectrum Spf 50</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160715</StartMarketingDate>
<EndMarketingDate>20231031</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Prime Enterprises Inc.</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>43.04; 43.04</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160715</StartMarketingDatePackage>
<EndMarketingDatePackage>20231031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64778-0239-3</NDCCode>
<PackageDescription>12 BOTTLE, PLASTIC in 1 CASE (64778-0239-3) > 480 mL in 1 BOTTLE, PLASTIC (64778-0239-1) </PackageDescription>
<NDC11Code>64778-0239-03</NDC11Code>
<ProductNDC>64778-0239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neutral Sodium Fluoride</ProprietaryName>
<NonProprietaryName>Sodium Fluoride</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20170223</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>AMD Medicom Inc.</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>.02</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69968-0239-3</NDCCode>
<PackageDescription>1500 mL in 1 BOTTLE, PLASTIC (69968-0239-3) </PackageDescription>
<NDC11Code>69968-0239-03</NDC11Code>
<ProductNDC>69968-0239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Listerine Freshburst Antiseptic</ProprietaryName>
<NonProprietaryName>Eucalyptol, Menthol, Unspecified Form, Methyl Salicylate, And Thymol</NonProprietaryName>
<DosageFormName>MOUTHWASH</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180817</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M022</ApplicationNumber>
<LabelerName>Kenvue Brands LLC</LabelerName>
<SubstanceName>EUCALYPTOL; MENTHOL, UNSPECIFIED FORM; METHYL SALICYLATE; THYMOL</SubstanceName>
<StrengthNumber>.92; .42; .6; .64</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent and reduce: 1 plaque, 2 gingivitis.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69968-0239-8</NDCCode>
<PackageDescription>2 BOTTLE, PLASTIC in 1 PACKAGE (69968-0239-8) > 1500 mL in 1 BOTTLE, PLASTIC (69968-0239-3) </PackageDescription>
<NDC11Code>69968-0239-08</NDC11Code>
<ProductNDC>69968-0239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Listerine Freshburst Antiseptic</ProprietaryName>
<NonProprietaryName>Eucalyptol, Menthol, Unspecified Form, Methyl Salicylate, And Thymol</NonProprietaryName>
<DosageFormName>MOUTHWASH</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180817</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part356</ApplicationNumber>
<LabelerName>Johnson & Johnson Consumer Inc.</LabelerName>
<SubstanceName>EUCALYPTOL; MENTHOL, UNSPECIFIED FORM; METHYL SALICYLATE; THYMOL</SubstanceName>
<StrengthNumber>.92; .42; .6; .64</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200424</StartMarketingDatePackage>
<EndMarketingDatePackage>20231011</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent and reduce: 1 plaque, 2 gingivitis.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-0239-3</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71335-0239-3) </PackageDescription>
<NDC11Code>71335-0239-03</NDC11Code>
<ProductNDC>71335-0239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203849</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine sulfate extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations [see Warnings and Precautions (5.1)], reserve morphine sulfate extended-release for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Morphine sulfate extended-release tablets are for oral use and contain morphine sulfate, USP an opioid agonist. Each tablet contains the following inactive ingredients common to all strengths: anhydrous lactose, cetostearyl alcohol, hydroxyethyl cellulose, magnesium stearate, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. The 30 mg tablets also contain yellow iron oxide. The 60 mg tablets also contain red iron oxide. The 100 mg and 200 mg tablets also contain red iron oxide and yellow iron oxide. The tablet strengths, 15 mg, 30 mg, 60 mg, 100 mg, and 200 mg, describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate). Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. Morphine sulfate, USP is soluble in water and ethanol. 1 g dissolves in 15.5 mL of water at 25°C and 1 g dissolves in 565 mL of ethanol at 25°C. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its molecular weight is 758.83 and its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>80425-0239-1</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (80425-0239-1) / 3 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>80425-0239-01</NDC11Code>
<ProductNDC>80425-0239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Moxifloxacin</ProprietaryName>
<NonProprietaryName>Moxifloxacin</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20230111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090080</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>MOXIFLOXACIN HYDROCHLORIDE MONOHYDRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Moxifloxacin ophthalmic solution is indicated for the treatment of bacterial conjunctivitis caused by susceptible strains of the following organisms. Corynebacterium species* Micrococcus luteus* Staphylococcus aureus Staphylococcus epidermidis Staphylococcus haemolyticus Staphylococcus hominis Staphylococcus warneri* Streptococcus pneumoniae Streptococcus viridans group Acinetobacter lwoffii* Haemophilus influenza Haemophilus parainfluenzae* Chlamydia trachomatis. *Efficacy for this organism was studied in fewer than 10 infections.</IndicationAndUsage>
<Description>Moxifloxacin ophthalmic solution, USP 0.5% is a sterile solution for topical ophthalmic use. Moxifloxacin hydrochloride is an 8-methoxy fluoroquinolone anti-infective, with a diazabicyclononyl ring at the C7 position. Chemical Name: 1-Cyclopropyl-6-fluoro-1,4-dihydro-8-methoxy-7-[(4aS,7aS)-octahydro-6H-pyrrolol[3,4-b]pyridin-6-yl]-4-oxo-3-quinoline carboxylic acid, monohydrochloride monohydrate. Moxifloxacin hydrochloride monohydrate is a light yellow or yellow powder or crystals. Each mL of moxifloxacin ophthalmic solution, USP contains 5.45 mg moxifloxacin hydrochloride, equivalent to 5 mg moxifloxacin base. Contains: Active: Moxifloxacin 0.5% (5 mg/mL); Inactives: Boric acid, sodium chloride, sodium hydroxide and water for injection. May also contain hydrochloric acid and/or additional sodium hydroxide to adjust pH to approximately 6.8. Moxifloxacin ophthalmic solution, USP is an isotonic solution with an osmolality of approximately 290 mOsm/kg.</Description>
</NDC>
<NDC>
<NDCCode>10544-239-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (10544-239-30)</PackageDescription>
<NDC11Code>10544-0239-30</NDC11Code>
<ProductNDC>10544-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077321</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril tablets are indicated for the treatment of hypertension. They may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5·2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch. 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, red iron oxide, starch. 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch, yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>10544-239-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (10544-239-60)</PackageDescription>
<NDC11Code>10544-0239-60</NDC11Code>
<ProductNDC>10544-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091216</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077321</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lisinopril tablets are indicated for the treatment of hypertension. They may be used alone as initial therapy or concomitantly with other classes of antihypertensive agents.</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O5·2H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch. 5 mg, 10 mg, 20 mg and 30 mg tablets – colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, red iron oxide, starch. 40 mg tablets - colloidal silicon dioxide, dibasic calcium phosphate, magnesium stearate, mannitol, pre-gelatinized starch, starch, yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>11014-0239-1</NDCCode>
<PackageDescription>1 BAG in 1 CONTAINER (11014-0239-1) > 967000 CAPSULE in 1 BAG</PackageDescription>
<NDC11Code>11014-0239-01</NDC11Code>
<ProductNDC>11014-0239</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Mixed Salts Of A Single Entity Amphetamine Product Er Capsules, 15 Mg</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<StartMarketingDate>20160216</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Catalent Pharma Solutions, LLC</LabelerName>
<SubstanceName>AMPHETAMINE ASPARTATE MONOHYDRATE; AMPHETAMINE SULFATE; DEXTROAMPHETAMINE SACCHARATE; DEXTROAMPHETAMINE SULFATE</SubstanceName>
<StrengthNumber>3.75; 3.75; 3.75; 3.75</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>16-FEB-16</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>13709-239-01</NDCCode>
<PackageDescription>90 g in 1 CAN (13709-239-01) </PackageDescription>
<NDC11Code>13709-0239-01</NDC11Code>
<ProductNDC>13709-239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Neilmed Anti-itch</ProprietaryName>
<NonProprietaryName>Anti-itch Spray</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201111</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>NeilMed Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily alleviates itching associated with minor skin irritation, inflammation and rashes due to: 1 Eczema , , 2 Poison ivy, oak and sumac, 3 Cosmetics, 4 Psoriasis, 5 Soaps and detergents, 6 Jewelry, 7 Insect bites, 8 Seborrheic dermatitis.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>21695-239-03</NDCCode>
<PackageDescription>3 TABLET in 1 BOTTLE (21695-239-03)</PackageDescription>
<NDC11Code>21695-0239-03</NDC11Code>
<ProductNDC>21695-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071194</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF.</Description>
</NDC>
<NDC>
<NDCCode>21695-239-15</NDCCode>
<PackageDescription>15 TABLET in 1 BOTTLE (21695-239-15)</PackageDescription>
<NDC11Code>21695-0239-15</NDC11Code>
<ProductNDC>21695-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071194</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF.</Description>
</NDC>
<NDC>
<NDCCode>21695-239-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (21695-239-30)</PackageDescription>
<NDC11Code>21695-0239-30</NDC11Code>
<ProductNDC>21695-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071194</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF.</Description>
</NDC>
<NDC>
<NDCCode>21695-239-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (21695-239-60)</PackageDescription>
<NDC11Code>21695-0239-60</NDC11Code>
<ProductNDC>21695-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071194</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF.</Description>
</NDC>
<NDC>
<NDCCode>21695-239-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (21695-239-90)</PackageDescription>
<NDC11Code>21695-0239-90</NDC11Code>
<ProductNDC>21695-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071194</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF.</Description>
</NDC>
<NDC>
<NDCCode>24979-239-07</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (24979-239-07) </PackageDescription>
<NDC11Code>24979-0239-07</NDC11Code>
<ProductNDC>24979-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zestril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240425</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019777</ApplicationNumber>
<LabelerName>Upsher-Smith Laboratories, LLC</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240425</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Zestril is supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets - calcium phosphate, magnesium stearate, mannitol, starch. 5 mg, 10 mg, 20 mg and 30 mg tablets - calcium phosphate, magnesium stearate, mannitol, red ferric oxide, starch. 40 mg tablets - calcium phosphate, magnesium stearate, mannitol, starch, yellow ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>25021-239-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-239-05) / 5.26 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0239-05</NDC11Code>
<ProductNDC>25021-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemcitabine</ProprietaryName>
<NonProprietaryName>Gemcitabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209077</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>38</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .</IndicationAndUsage>
<Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>25021-239-26</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-239-26) / 26.3 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0239-26</NDC11Code>
<ProductNDC>25021-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemcitabine</ProprietaryName>
<NonProprietaryName>Gemcitabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209077</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>38</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .</IndicationAndUsage>
<Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>25021-239-52</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-239-52) / 52.6 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0239-52</NDC11Code>
<ProductNDC>25021-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemcitabine</ProprietaryName>
<NonProprietaryName>Gemcitabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209077</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>38</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .</IndicationAndUsage>
<Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>27808-239-01</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (27808-239-01) </PackageDescription>
<NDC11Code>27808-0239-01</NDC11Code>
<ProductNDC>27808-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214322</ApplicationNumber>
<LabelerName>Tris Pharma Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-06-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with microcrystalline cellulose and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the caramel capsule shells contain red iron oxide. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>29300-239-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE, PLASTIC (29300-239-05) </PackageDescription>
<NDC11Code>29300-0239-05</NDC11Code>
<ProductNDC>29300-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200805</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205399</ApplicationNumber>
<LabelerName>Unichem Pharmaceuticals (USA), Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200805</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.</IndicationAndUsage>
<Description>Tolterodine tartrate tablets contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). The empirical formula of tolterodine tartrate is C26H37NO7, and its molecular weight is 475.6. The structural formula of tolterodine tartrate is represented below. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 14.7657 mg/mL. It is sparingly soluble in water, slightly soluble in anhydrous ethanol, practically insoluble in heptane. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate tablets for oral administration contain 1 or 2 mg of tolterodine tartrate. The inactive ingredients are microcrystalline cellulose, dibasic calcium phosphate dihydrate, sodium starch glycolate type B (pH 3.0 to 5.0), colloidal silicon dioxide, magnesium stearate, hypromellose, stearic acid, and titanium dioxide.</Description>
</NDC>
</NDCList>