{
"NDC": [
{
"NDCCode": "49288-0239-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0239-4)",
"NDC11Code": "49288-0239-04",
"ProductNDC": "49288-0239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"NonProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19970613",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102226",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN",
"StrengthNumber": "1667; 16667; 16667; 16667; 16667; .0083",
"StrengthUnit": "[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.",
"Description": "DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection."
},
{
"NDCCode": "49288-0239-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0239-3)",
"NDC11Code": "49288-0239-03",
"ProductNDC": "49288-0239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"NonProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19970613",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102226",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN",
"StrengthNumber": "1667; 16667; 16667; 16667; 16667; .0083",
"StrengthUnit": "[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.",
"Description": "DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection."
},
{
"NDCCode": "49288-0239-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0239-5)",
"NDC11Code": "49288-0239-05",
"ProductNDC": "49288-0239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"NonProprietaryName": "Mixture Of Standardized And Non-standardized Southern Grasses",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19970613",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102226",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN",
"StrengthNumber": "1667; 16667; 16667; 16667; 16667; .0083",
"StrengthUnit": "[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.",
"Description": "DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection."
},
{
"NDCCode": "13630-0239-4",
"PackageDescription": "188 mL in 1 CAN (13630-0239-4) ",
"NDC11Code": "13630-0239-04",
"ProductNDC": "13630-0239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "7-eleven",
"ProprietaryNameSuffix": "Broad Spectrum Spf",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220620",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "M020",
"LabelerName": "Prime Packaging, Inc.",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "24.8; 62.1; 41.4; 41.4",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220620",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "15631-0239-4",
"PackageDescription": "2500 PELLET in 1 PACKAGE (15631-0239-4) ",
"NDC11Code": "15631-0239-04",
"ProductNDC": "15631-0239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Iris Tenax",
"NonProprietaryName": "Iris Tenax",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150902",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "IRIS TENAX",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "37662-0239-4",
"PackageDescription": "10000 PELLET in 1 BOTTLE, GLASS (37662-0239-4) ",
"NDC11Code": "37662-0239-04",
"ProductNDC": "37662-0239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Chelidonium Majus",
"NonProprietaryName": "Chelidonium Majus",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220531",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "CHELIDONIUM MAJUS",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220531",
"SamplePackage": "N"
},
{
"NDCCode": "38779-0239-4",
"PackageDescription": "25 g in 1 JAR (38779-0239-4)",
"NDC11Code": "38779-0239-04",
"ProductNDC": "38779-0239",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Miconazole",
"DosageFormName": "POWDER",
"StartMarketingDate": "20150805",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Medisca Inc.",
"SubstanceName": "MICONAZOLE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20221231"
},
{
"NDCCode": "51552-0239-4",
"PackageDescription": "500 g in 1 CONTAINER (51552-0239-4) ",
"NDC11Code": "51552-0239-04",
"ProductNDC": "51552-0239",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Petrolatum",
"DosageFormName": "GEL",
"StartMarketingDate": "19980401",
"EndMarketingDate": "20240812",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Fagron Inc",
"SubstanceName": "PETROLATUM",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "01-APR-98",
"EndMarketingDatePackage": "12-AUG-24"
},
{
"NDCCode": "71335-0239-4",
"PackageDescription": "120 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71335-0239-4) ",
"NDC11Code": "71335-0239-04",
"ProductNDC": "71335-0239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20151026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203849",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220209",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine sulfate extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations [see Warnings and Precautions (5.1)], reserve morphine sulfate extended-release for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Morphine sulfate extended-release tablets are for oral use and contain morphine sulfate, USP an opioid agonist. Each tablet contains the following inactive ingredients common to all strengths: anhydrous lactose, cetostearyl alcohol, hydroxyethyl cellulose, magnesium stearate, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. The 30 mg tablets also contain yellow iron oxide. The 60 mg tablets also contain red iron oxide. The 100 mg and 200 mg tablets also contain red iron oxide and yellow iron oxide. The tablet strengths, 15 mg, 30 mg, 60 mg, 100 mg, and 200 mg, describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate). Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. Morphine sulfate, USP is soluble in water and ethanol. 1 g dissolves in 15.5 mL of water at 25°C and 1 g dissolves in 565 mL of ethanol at 25°C. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its molecular weight is 758.83 and its structural formula is."
},
{
"NDCCode": "13709-239-01",
"PackageDescription": "90 g in 1 CAN (13709-239-01) ",
"NDC11Code": "13709-0239-01",
"ProductNDC": "13709-239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Neilmed Anti-itch",
"NonProprietaryName": "Anti-itch Spray",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201111",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "NeilMed Pharmaceuticals Inc.",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201111",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily alleviates itching associated with minor skin irritation, inflammation and rashes due to: 1 Eczema , , 2 Poison ivy, oak and sumac, 3 Cosmetics, 4 Psoriasis, 5 Soaps and detergents, 6 Jewelry, 7 Insect bites, 8 Seborrheic dermatitis."
},
{
"NDCCode": "16729-239-93",
"PackageDescription": "25 VIAL in 1 CARTON (16729-239-93) / 2 mL in 1 VIAL (16729-239-30) ",
"NDC11Code": "16729-0239-93",
"ProductNDC": "16729-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine",
"NonProprietaryName": "Dexmedetomidine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20161221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204023",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20161221",
"SamplePackage": "N",
"IndicationAndUsage": "Dexmedetomidine injection is a alpha 2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting Administer dexmedetomidine injection by continuous infusion not to exceed 24 hours ( 1.1) , 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures ( 1.2) .",
"Description": "Dexmedetomidine injection, USP (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine injection, USP contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha 2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2 HCl and the structural formula is:. Dexmedetomidine hydrochloride, USP is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH ofbetween 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection and is to be used after dilution. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "21695-239-03",
"PackageDescription": "3 TABLET in 1 BOTTLE (21695-239-03)",
"NDC11Code": "21695-0239-03",
"ProductNDC": "21695-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071194",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF."
},
{
"NDCCode": "21695-239-15",
"PackageDescription": "15 TABLET in 1 BOTTLE (21695-239-15)",
"NDC11Code": "21695-0239-15",
"ProductNDC": "21695-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071194",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF."
},
{
"NDCCode": "21695-239-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (21695-239-30)",
"NDC11Code": "21695-0239-30",
"ProductNDC": "21695-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071194",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF."
},
{
"NDCCode": "21695-239-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (21695-239-60)",
"NDC11Code": "21695-0239-60",
"ProductNDC": "21695-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071194",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF."
},
{
"NDCCode": "21695-239-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (21695-239-90)",
"NDC11Code": "21695-0239-90",
"ProductNDC": "21695-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lorazepam",
"NonProprietaryName": "Lorazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071194",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LORAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF."
},
{
"NDCCode": "25021-239-05",
"PackageDescription": "1 VIAL in 1 CARTON (25021-239-05) / 5.26 mL in 1 VIAL",
"NDC11Code": "25021-0239-05",
"ProductNDC": "25021-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemcitabine",
"NonProprietaryName": "Gemcitabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209077",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "38",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190115",
"SamplePackage": "N",
"IndicationAndUsage": "Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .",
"Description": "Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "25021-239-26",
"PackageDescription": "1 VIAL in 1 CARTON (25021-239-26) / 26.3 mL in 1 VIAL",
"NDC11Code": "25021-0239-26",
"ProductNDC": "25021-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemcitabine",
"NonProprietaryName": "Gemcitabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209077",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "38",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190115",
"SamplePackage": "N",
"IndicationAndUsage": "Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .",
"Description": "Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "25021-239-52",
"PackageDescription": "1 VIAL in 1 CARTON (25021-239-52) / 52.6 mL in 1 VIAL",
"NDC11Code": "25021-0239-52",
"ProductNDC": "25021-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gemcitabine",
"NonProprietaryName": "Gemcitabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209077",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "38",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190115",
"SamplePackage": "N",
"IndicationAndUsage": "Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .",
"Description": "Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "27808-239-01",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (27808-239-01) ",
"NDC11Code": "27808-0239-01",
"ProductNDC": "27808-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20210715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214322",
"LabelerName": "Tris Pharma Inc",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2024-06-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220201",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with microcrystalline cellulose and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the caramel capsule shells contain red iron oxide. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide."
},
{
"NDCCode": "29300-239-05",
"PackageDescription": "500 TABLET in 1 BOTTLE, PLASTIC (29300-239-05) ",
"NDC11Code": "29300-0239-05",
"ProductNDC": "29300-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200805",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205399",
"LabelerName": "Unichem Pharmaceuticals (USA), Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2020-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200805",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.",
"Description": "Tolterodine tartrate tablets contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). The empirical formula of tolterodine tartrate is C26H37NO7, and its molecular weight is 475.6. The structural formula of tolterodine tartrate is represented below. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 14.7657 mg/mL. It is sparingly soluble in water, slightly soluble in anhydrous ethanol, practically insoluble in heptane. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate tablets for oral administration contain 1 or 2 mg of tolterodine tartrate. The inactive ingredients are microcrystalline cellulose, dibasic calcium phosphate dihydrate, sodium starch glycolate type B (pH 3.0 to 5.0), colloidal silicon dioxide, magnesium stearate, hypromellose, stearic acid, and titanium dioxide."
},
{
"NDCCode": "29300-239-16",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (29300-239-16) ",
"NDC11Code": "29300-0239-16",
"ProductNDC": "29300-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolterodine Tartrate",
"NonProprietaryName": "Tolterodine Tartrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200805",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205399",
"LabelerName": "Unichem Pharmaceuticals (USA), Inc.",
"SubstanceName": "TOLTERODINE TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2020-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200805",
"SamplePackage": "N",
"IndicationAndUsage": "Tolterodine tartrate tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.",
"Description": "Tolterodine tartrate tablets contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). The empirical formula of tolterodine tartrate is C26H37NO7, and its molecular weight is 475.6. The structural formula of tolterodine tartrate is represented below. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 14.7657 mg/mL. It is sparingly soluble in water, slightly soluble in anhydrous ethanol, practically insoluble in heptane. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate tablets for oral administration contain 1 or 2 mg of tolterodine tartrate. The inactive ingredients are microcrystalline cellulose, dibasic calcium phosphate dihydrate, sodium starch glycolate type B (pH 3.0 to 5.0), colloidal silicon dioxide, magnesium stearate, hypromellose, stearic acid, and titanium dioxide."
},
{
"NDCCode": "31722-239-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (31722-239-10)",
"NDC11Code": "31722-0239-10",
"ProductNDC": "31722-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077955",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25CIN2O5 C6H6O3S, and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5 mg, 5 mg, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate."
},
{
"NDCCode": "31722-239-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (31722-239-90)",
"NDC11Code": "31722-0239-90",
"ProductNDC": "31722-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077955",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25CIN2O5 C6H6O3S, and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5 mg, 5 mg, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate."
},
{
"NDCCode": "33342-239-11",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (33342-239-11) ",
"NDC11Code": "33342-0239-11",
"ProductNDC": "33342-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20161208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206955",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2023-02-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20161208",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride tablets, USP/ metformin hydrochloride extended-release tablets,USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets,USP contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride, USP. Each tablet contains the inactive ingredients povidone, microcrystalline cellulose, sodium starch glycolate and magnesium stearate. In addition, the coating for the tablets contains hypromellose and polyethylene glycol. Metformin hydrochloride extended-release tablets,USP contain 500 mg or 750 mg of metformin hydrochloride, USP as the active ingredient. Each tablet contains the inactive ingredients carbomer homopolymer type A, magnesium trisilicate, dibasic calcium phosphate anhydrous, hydroxyl propyl cellulose, xanthan gum, microcrystalline cellulose, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol and talc. Metformin hydrochloride extended-release tablets 750 mg also contain iron oxide red. Metformin hydrochloride extended-release tablets: USP Dissolution test is pending."
},
{
"NDCCode": "41250-239-12",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (41250-239-12) > 5 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "41250-0239-12",
"ProductNDC": "41250-239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief-d",
"ProprietaryNameSuffix": "24 Hour",
"NonProprietaryName": "Loratadine And Pseudoephedrine Sulfate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160301",
"EndMarketingDate": "20240426",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075706",
"LabelerName": "MEIJER, INC.",
"SubstanceName": "LORATADINE; PSEUDOEPHEDRINE SULFATE",
"StrengthNumber": "10; 240",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-04-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160401",
"EndMarketingDatePackage": "20240426",
"SamplePackage": "N",
"IndicationAndUsage": "● temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 sneezing, 2 itchy, watery eyes, 3 runny nose, 4 itching of the nose or throat."
},
{
"NDCCode": "41250-239-79",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (41250-239-79) > 5 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "41250-0239-79",
"ProductNDC": "41250-239",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief-d",
"ProprietaryNameSuffix": "24 Hour",
"NonProprietaryName": "Loratadine And Pseudoephedrine Sulfate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160301",
"EndMarketingDate": "20240426",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075706",
"LabelerName": "MEIJER, INC.",
"SubstanceName": "LORATADINE; PSEUDOEPHEDRINE SULFATE",
"StrengthNumber": "10; 240",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-04-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160301",
"EndMarketingDatePackage": "20240426",
"SamplePackage": "N",
"IndicationAndUsage": "● temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 sneezing, 2 itchy, watery eyes, 3 runny nose, 4 itching of the nose or throat."
},
{
"NDCCode": "42023-239-01",
"PackageDescription": "1 VIAL in 1 CARTON (42023-239-01) / 10 mL in 1 VIAL",
"NDC11Code": "42023-0239-01",
"ProductNDC": "42023-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone Acetate",
"NonProprietaryName": "Methylprednisolone Acetate",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; SOFT TISSUE",
"StartMarketingDate": "20230512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214297",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "METHYLPREDNISOLONE ACETATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230512",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intramuscular use of Methylprednisolone Acetate Injectable Suspension is indicated as follows. Allergic States: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic Diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine Disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal Diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic Disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond Blackfan anemia), pure red cell aplasia, select cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic Diseases: For palliative management of leukemias and lymphomas. Nervous System: Cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic Diseases: Sympathetic ophthalmia, temporal arteritis, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal Diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome, or that due to lupus erythematosus. Respiratory Diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic Disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.",
"Description": "Methylprednisolone Acetate Injectable Suspension, USP is a sterile anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue, or intralesional injection. It is available in two strengths: 40 mg/mL, 80 mg/mL. Each mL of these preparations contains. Sodium Chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.5 to 7.0). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20-dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11ß)- and the molecular weight is 416.51. The structural formula is represented below. Methylprednisolone Acetate Injectable Suspension, USP contains methylprednisolone acetate which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate is a white or practically white, odorless, crystalline powder which melts at about 215° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water."
},
{
"NDCCode": "42571-239-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (42571-239-05) ",
"NDC11Code": "42571-0239-05",
"ProductNDC": "42571-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methazolamide",
"NonProprietaryName": "Methazolamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190305",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207438",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "METHAZOLAMIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2020-02-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190305",
"SamplePackage": "N",
"IndicationAndUsage": "Methazolamide tablets are indicated in the treatment of ocular conditions where lowering intraocular pressure is likely to be of therapeutic benefit, such as chronic open-angle glaucoma, secondary glaucoma, and preoperatively in acute angle-closure glaucoma where lowering the intraocular pressure is desired before surgery.",
"Description": "Methazolamide USP, a sulfonamide derivative, is a white or faintly yellow, crystalline powder having a slight odor, soluble in dimethylformamide, slightly soluble in acetone, very slightly soluble in water and in alcohol. The chemical name for methazolamide is: N-[5-(aminosulfonyl)-3-methyl-1,3,4-thiadiazol-2(3H)-ylidene]-acetamide and it has the following structural formula:. Each tablet, for oral administration, contains 25 mg or 50 mg methazolamide USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate dihydrate, magnesium stearate, and microcrystalline cellulose."
},
{
"NDCCode": "42571-239-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (42571-239-10) ",
"NDC11Code": "42571-0239-10",
"ProductNDC": "42571-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methazolamide",
"NonProprietaryName": "Methazolamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190305",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207438",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "METHAZOLAMIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2020-02-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190305",
"SamplePackage": "N",
"IndicationAndUsage": "Methazolamide tablets are indicated in the treatment of ocular conditions where lowering intraocular pressure is likely to be of therapeutic benefit, such as chronic open-angle glaucoma, secondary glaucoma, and preoperatively in acute angle-closure glaucoma where lowering the intraocular pressure is desired before surgery.",
"Description": "Methazolamide USP, a sulfonamide derivative, is a white or faintly yellow, crystalline powder having a slight odor, soluble in dimethylformamide, slightly soluble in acetone, very slightly soluble in water and in alcohol. The chemical name for methazolamide is: N-[5-(aminosulfonyl)-3-methyl-1,3,4-thiadiazol-2(3H)-ylidene]-acetamide and it has the following structural formula:. Each tablet, for oral administration, contains 25 mg or 50 mg methazolamide USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate dihydrate, magnesium stearate, and microcrystalline cellulose."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0239-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0239-4)</PackageDescription>
<NDC11Code>49288-0239-04</NDC11Code>
<ProductNDC>49288-0239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</ProprietaryName>
<NonProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970613</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102226</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN</SubstanceName>
<StrengthNumber>1667; 16667; 16667; 16667; 16667; .0083</StrengthNumber>
<StrengthUnit>[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.</IndicationAndUsage>
<Description>DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>49288-0239-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0239-3)</PackageDescription>
<NDC11Code>49288-0239-03</NDC11Code>
<ProductNDC>49288-0239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</ProprietaryName>
<NonProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970613</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102226</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN</SubstanceName>
<StrengthNumber>1667; 16667; 16667; 16667; 16667; .0083</StrengthNumber>
<StrengthUnit>[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.</IndicationAndUsage>
<Description>DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>49288-0239-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0239-5)</PackageDescription>
<NDC11Code>49288-0239-05</NDC11Code>
<ProductNDC>49288-0239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</ProprietaryName>
<NonProprietaryName>Mixture Of Standardized And Non-standardized Southern Grasses</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970613</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102226</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN; POA PRATENSIS POLLEN; DACTYLIS GLOMERATA POLLEN; PHLEUM PRATENSE POLLEN; AGROSTIS GIGANTEA POLLEN; SORGHUM HALEPENSE POLLEN</SubstanceName>
<StrengthNumber>1667; 16667; 16667; 16667; 16667; .0083</StrengthNumber>
<StrengthUnit>[BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; [BAU]/mL; g/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.</IndicationAndUsage>
<Description>DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>13630-0239-4</NDCCode>
<PackageDescription>188 mL in 1 CAN (13630-0239-4) </PackageDescription>
<NDC11Code>13630-0239-04</NDC11Code>
<ProductNDC>13630-0239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>7-eleven</ProprietaryName>
<ProprietaryNameSuffix>Broad Spectrum Spf</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220620</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Prime Packaging, Inc.</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>24.8; 62.1; 41.4; 41.4</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220620</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>15631-0239-4</NDCCode>
<PackageDescription>2500 PELLET in 1 PACKAGE (15631-0239-4) </PackageDescription>
<NDC11Code>15631-0239-04</NDC11Code>
<ProductNDC>15631-0239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Iris Tenax</ProprietaryName>
<NonProprietaryName>Iris Tenax</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150902</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>IRIS TENAX</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37662-0239-4</NDCCode>
<PackageDescription>10000 PELLET in 1 BOTTLE, GLASS (37662-0239-4) </PackageDescription>
<NDC11Code>37662-0239-04</NDC11Code>
<ProductNDC>37662-0239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Chelidonium Majus</ProprietaryName>
<NonProprietaryName>Chelidonium Majus</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220531</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>CHELIDONIUM MAJUS</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>38779-0239-4</NDCCode>
<PackageDescription>25 g in 1 JAR (38779-0239-4)</PackageDescription>
<NDC11Code>38779-0239-04</NDC11Code>
<ProductNDC>38779-0239</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Miconazole</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20150805</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Medisca Inc.</LabelerName>
<SubstanceName>MICONAZOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51552-0239-4</NDCCode>
<PackageDescription>500 g in 1 CONTAINER (51552-0239-4) </PackageDescription>
<NDC11Code>51552-0239-04</NDC11Code>
<ProductNDC>51552-0239</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Petrolatum</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<StartMarketingDate>19980401</StartMarketingDate>
<EndMarketingDate>20240812</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Fagron Inc</LabelerName>
<SubstanceName>PETROLATUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>01-APR-98</StartMarketingDatePackage>
<EndMarketingDatePackage>12-AUG-24</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71335-0239-4</NDCCode>
<PackageDescription>120 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (71335-0239-4) </PackageDescription>
<NDC11Code>71335-0239-04</NDC11Code>
<ProductNDC>71335-0239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203849</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine sulfate extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations [see Warnings and Precautions (5.1)], reserve morphine sulfate extended-release for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Morphine sulfate extended-release tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Morphine sulfate extended-release tablets are for oral use and contain morphine sulfate, USP an opioid agonist. Each tablet contains the following inactive ingredients common to all strengths: anhydrous lactose, cetostearyl alcohol, hydroxyethyl cellulose, magnesium stearate, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. The 30 mg tablets also contain yellow iron oxide. The 60 mg tablets also contain red iron oxide. The 100 mg and 200 mg tablets also contain red iron oxide and yellow iron oxide. The tablet strengths, 15 mg, 30 mg, 60 mg, 100 mg, and 200 mg, describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate). Morphine sulfate, USP is an odorless, white, crystalline powder with a bitter taste. Morphine sulfate, USP is soluble in water and ethanol. 1 g dissolves in 15.5 mL of water at 25°C and 1 g dissolves in 565 mL of ethanol at 25°C. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its molecular weight is 758.83 and its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>13709-239-01</NDCCode>
<PackageDescription>90 g in 1 CAN (13709-239-01) </PackageDescription>
<NDC11Code>13709-0239-01</NDC11Code>
<ProductNDC>13709-239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Neilmed Anti-itch</ProprietaryName>
<NonProprietaryName>Anti-itch Spray</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201111</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>NeilMed Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily alleviates itching associated with minor skin irritation, inflammation and rashes due to: 1 Eczema , , 2 Poison ivy, oak and sumac, 3 Cosmetics, 4 Psoriasis, 5 Soaps and detergents, 6 Jewelry, 7 Insect bites, 8 Seborrheic dermatitis.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16729-239-93</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (16729-239-93) / 2 mL in 1 VIAL (16729-239-30) </PackageDescription>
<NDC11Code>16729-0239-93</NDC11Code>
<ProductNDC>16729-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine</ProprietaryName>
<NonProprietaryName>Dexmedetomidine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20161221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204023</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexmedetomidine injection is a alpha 2-adrenergic receptor agonist indicated for: : 1 Sedation of initially intubated and mechanically ventilated adult patients during treatment in an intensive care setting Administer dexmedetomidine injection by continuous infusion not to exceed 24 hours ( 1.1) , 2 Sedation of non-intubated adult patients prior to and/or during surgical and other procedures ( 1.2) .</IndicationAndUsage>
<Description>Dexmedetomidine injection, USP (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine injection, USP contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha 2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C 13H 16N 2 HCl and the structural formula is:. Dexmedetomidine hydrochloride, USP is a white or almost white powder that is freely soluble in water and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine injection, USP is intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH ofbetween 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection and is to be used after dilution. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>21695-239-03</NDCCode>
<PackageDescription>3 TABLET in 1 BOTTLE (21695-239-03)</PackageDescription>
<NDC11Code>21695-0239-03</NDC11Code>
<ProductNDC>21695-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071194</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF.</Description>
</NDC>
<NDC>
<NDCCode>21695-239-15</NDCCode>
<PackageDescription>15 TABLET in 1 BOTTLE (21695-239-15)</PackageDescription>
<NDC11Code>21695-0239-15</NDC11Code>
<ProductNDC>21695-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071194</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF.</Description>
</NDC>
<NDC>
<NDCCode>21695-239-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (21695-239-30)</PackageDescription>
<NDC11Code>21695-0239-30</NDC11Code>
<ProductNDC>21695-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071194</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF.</Description>
</NDC>
<NDC>
<NDCCode>21695-239-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (21695-239-60)</PackageDescription>
<NDC11Code>21695-0239-60</NDC11Code>
<ProductNDC>21695-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071194</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF.</Description>
</NDC>
<NDC>
<NDCCode>21695-239-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (21695-239-90)</PackageDescription>
<NDC11Code>21695-0239-90</NDC11Code>
<ProductNDC>21695-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lorazepam</ProprietaryName>
<NonProprietaryName>Lorazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071194</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LORAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lorazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety or anxiety associated with depressive symptoms. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The effectiveness of lorazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Lorazepam, an antianxiety agent, has the chemical formula, 7-chloro-5-(o-chlorophenyl)-1,3-dihydro-3-hydroxy-2H-1,4-benzodiazepin-2-one. It is a nearly white powder almost insoluble in water. Each lorazepam tablet, to be taken orally, contains 0.5 mg, 1 mg, or 2 mg of lorazepam. The inactive ingredients present are: lactose, hypromellose USP, specially denatured alcohol 3A, pregelatinized starch NF, and magnesium stearate NF.</Description>
</NDC>
<NDC>
<NDCCode>25021-239-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-239-05) / 5.26 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0239-05</NDC11Code>
<ProductNDC>25021-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemcitabine</ProprietaryName>
<NonProprietaryName>Gemcitabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209077</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>38</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .</IndicationAndUsage>
<Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>25021-239-26</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-239-26) / 26.3 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0239-26</NDC11Code>
<ProductNDC>25021-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemcitabine</ProprietaryName>
<NonProprietaryName>Gemcitabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209077</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>38</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .</IndicationAndUsage>
<Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>25021-239-52</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (25021-239-52) / 52.6 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0239-52</NDC11Code>
<ProductNDC>25021-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gemcitabine</ProprietaryName>
<NonProprietaryName>Gemcitabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209077</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>38</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: : 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1) , 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2) , 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3) , 4 as a single agent for the treatment of pancreatic cancer. (1.4) .</IndicationAndUsage>
<Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl is 2′-deoxy-2′,2′-difluorocytidine monohydrochloride (β-isomer). The structural formula is as follows:. Gemcitabine HCl is a white to off-white solid with a molecular formula of C9H11F2N3O4 HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 gram, or 2 grams of gemcitabine equivalent to 227.7 mg, 1.138 grams, or 2.276 grams of gemcitabine HCl. Each mL contains 38 mg of gemcitabine free base in Water for Injection, USP equivalent to 43.26 mg of gemcitabine HCl. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>27808-239-01</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (27808-239-01) </PackageDescription>
<NDC11Code>27808-0239-01</NDC11Code>
<ProductNDC>27808-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214322</ApplicationNumber>
<LabelerName>Tris Pharma Inc</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-06-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 50, 75, 100, 150, 200, 225, and 300 mg of pregabalin, along with microcrystalline cellulose and talc as inactive ingredients. The capsule shells contain gelatin and titanium dioxide. In addition, the caramel capsule shells contain red iron oxide. The imprinting ink contains shellac, black iron oxide, propylene glycol, and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>29300-239-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE, PLASTIC (29300-239-05) </PackageDescription>
<NDC11Code>29300-0239-05</NDC11Code>
<ProductNDC>29300-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200805</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205399</ApplicationNumber>
<LabelerName>Unichem Pharmaceuticals (USA), Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200805</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.</IndicationAndUsage>
<Description>Tolterodine tartrate tablets contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). The empirical formula of tolterodine tartrate is C26H37NO7, and its molecular weight is 475.6. The structural formula of tolterodine tartrate is represented below. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 14.7657 mg/mL. It is sparingly soluble in water, slightly soluble in anhydrous ethanol, practically insoluble in heptane. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate tablets for oral administration contain 1 or 2 mg of tolterodine tartrate. The inactive ingredients are microcrystalline cellulose, dibasic calcium phosphate dihydrate, sodium starch glycolate type B (pH 3.0 to 5.0), colloidal silicon dioxide, magnesium stearate, hypromellose, stearic acid, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>29300-239-16</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (29300-239-16) </PackageDescription>
<NDC11Code>29300-0239-16</NDC11Code>
<ProductNDC>29300-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolterodine Tartrate</ProprietaryName>
<NonProprietaryName>Tolterodine Tartrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200805</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205399</ApplicationNumber>
<LabelerName>Unichem Pharmaceuticals (USA), Inc.</LabelerName>
<SubstanceName>TOLTERODINE TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200805</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tolterodine tartrate tablets are indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency.</IndicationAndUsage>
<Description>Tolterodine tartrate tablets contain tolterodine tartrate USP. The active moiety, tolterodine, is a muscarinic receptor antagonist. The chemical name of tolterodine tartrate is (R)-2-[3-[bis(1-methylethyl)-amino]1-phenylpropyl]-4-methylphenol [R-(R*,R*)]-2,3dihydroxybutanedioate (1:1) (salt). The empirical formula of tolterodine tartrate is C26H37NO7, and its molecular weight is 475.6. The structural formula of tolterodine tartrate is represented below. Tolterodine tartrate is a white, crystalline powder. The pKa value is 9.87 and the solubility in water is 14.7657 mg/mL. It is sparingly soluble in water, slightly soluble in anhydrous ethanol, practically insoluble in heptane. The partition coefficient (Log D) between n-octanol and water is 1.83 at pH 7.3. Tolterodine tartrate tablets for oral administration contain 1 or 2 mg of tolterodine tartrate. The inactive ingredients are microcrystalline cellulose, dibasic calcium phosphate dihydrate, sodium starch glycolate type B (pH 3.0 to 5.0), colloidal silicon dioxide, magnesium stearate, hypromellose, stearic acid, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>31722-239-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (31722-239-10)</PackageDescription>
<NDC11Code>31722-0239-10</NDC11Code>
<ProductNDC>31722-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077955</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25CIN2O5 C6H6O3S, and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5 mg, 5 mg, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>31722-239-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (31722-239-90)</PackageDescription>
<NDC11Code>31722-0239-90</NDC11Code>
<ProductNDC>31722-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077955</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Amlodipine besylate, USP is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate, USP is chemically described as 3-Ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25CIN2O5 C6H6O3S, and its structural formula is. Amlodipine besylate, USP is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5 mg, 5 mg, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, USP each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>33342-239-11</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (33342-239-11) </PackageDescription>
<NDC11Code>33342-0239-11</NDC11Code>
<ProductNDC>33342-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206955</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus. Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride tablets, USP/ metformin hydrochloride extended-release tablets,USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets,USP contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride, USP. Each tablet contains the inactive ingredients povidone, microcrystalline cellulose, sodium starch glycolate and magnesium stearate. In addition, the coating for the tablets contains hypromellose and polyethylene glycol. Metformin hydrochloride extended-release tablets,USP contain 500 mg or 750 mg of metformin hydrochloride, USP as the active ingredient. Each tablet contains the inactive ingredients carbomer homopolymer type A, magnesium trisilicate, dibasic calcium phosphate anhydrous, hydroxyl propyl cellulose, xanthan gum, microcrystalline cellulose, magnesium stearate, polyvinyl alcohol, titanium dioxide, polyethylene glycol and talc. Metformin hydrochloride extended-release tablets 750 mg also contain iron oxide red. Metformin hydrochloride extended-release tablets: USP Dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>41250-239-12</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (41250-239-12) > 5 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>41250-0239-12</NDC11Code>
<ProductNDC>41250-239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief-d</ProprietaryName>
<ProprietaryNameSuffix>24 Hour</ProprietaryNameSuffix>
<NonProprietaryName>Loratadine And Pseudoephedrine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160301</StartMarketingDate>
<EndMarketingDate>20240426</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075706</ApplicationNumber>
<LabelerName>MEIJER, INC.</LabelerName>
<SubstanceName>LORATADINE; PSEUDOEPHEDRINE SULFATE</SubstanceName>
<StrengthNumber>10; 240</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160401</StartMarketingDatePackage>
<EndMarketingDatePackage>20240426</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>● temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 sneezing, 2 itchy, watery eyes, 3 runny nose, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41250-239-79</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (41250-239-79) > 5 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>41250-0239-79</NDC11Code>
<ProductNDC>41250-239</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief-d</ProprietaryName>
<ProprietaryNameSuffix>24 Hour</ProprietaryNameSuffix>
<NonProprietaryName>Loratadine And Pseudoephedrine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160301</StartMarketingDate>
<EndMarketingDate>20240426</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075706</ApplicationNumber>
<LabelerName>MEIJER, INC.</LabelerName>
<SubstanceName>LORATADINE; PSEUDOEPHEDRINE SULFATE</SubstanceName>
<StrengthNumber>10; 240</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160301</StartMarketingDatePackage>
<EndMarketingDatePackage>20240426</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>● temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 sneezing, 2 itchy, watery eyes, 3 runny nose, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42023-239-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (42023-239-01) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>42023-0239-01</NDC11Code>
<ProductNDC>42023-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone Acetate</ProprietaryName>
<NonProprietaryName>Methylprednisolone Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; SOFT TISSUE</RouteName>
<StartMarketingDate>20230512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214297</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>METHYLPREDNISOLONE ACETATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intramuscular use of Methylprednisolone Acetate Injectable Suspension is indicated as follows. Allergic States: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic Diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine Disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal Diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic Disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond Blackfan anemia), pure red cell aplasia, select cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic Diseases: For palliative management of leukemias and lymphomas. Nervous System: Cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic Diseases: Sympathetic ophthalmia, temporal arteritis, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal Diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome, or that due to lupus erythematosus. Respiratory Diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic Disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Methylprednisolone Acetate Injectable Suspension, USP is a sterile anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue, or intralesional injection. It is available in two strengths: 40 mg/mL, 80 mg/mL. Each mL of these preparations contains. Sodium Chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.5 to 7.0). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20-dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11ß)- and the molecular weight is 416.51. The structural formula is represented below. Methylprednisolone Acetate Injectable Suspension, USP contains methylprednisolone acetate which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate is a white or practically white, odorless, crystalline powder which melts at about 215° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water.</Description>
</NDC>
<NDC>
<NDCCode>42571-239-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (42571-239-05) </PackageDescription>
<NDC11Code>42571-0239-05</NDC11Code>
<ProductNDC>42571-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methazolamide</ProprietaryName>
<NonProprietaryName>Methazolamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190305</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207438</ApplicationNumber>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>METHAZOLAMIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2020-02-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methazolamide tablets are indicated in the treatment of ocular conditions where lowering intraocular pressure is likely to be of therapeutic benefit, such as chronic open-angle glaucoma, secondary glaucoma, and preoperatively in acute angle-closure glaucoma where lowering the intraocular pressure is desired before surgery.</IndicationAndUsage>
<Description>Methazolamide USP, a sulfonamide derivative, is a white or faintly yellow, crystalline powder having a slight odor, soluble in dimethylformamide, slightly soluble in acetone, very slightly soluble in water and in alcohol. The chemical name for methazolamide is: N-[5-(aminosulfonyl)-3-methyl-1,3,4-thiadiazol-2(3H)-ylidene]-acetamide and it has the following structural formula:. Each tablet, for oral administration, contains 25 mg or 50 mg methazolamide USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate dihydrate, magnesium stearate, and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>42571-239-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (42571-239-10) </PackageDescription>
<NDC11Code>42571-0239-10</NDC11Code>
<ProductNDC>42571-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methazolamide</ProprietaryName>
<NonProprietaryName>Methazolamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190305</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207438</ApplicationNumber>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>METHAZOLAMIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2020-02-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190305</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methazolamide tablets are indicated in the treatment of ocular conditions where lowering intraocular pressure is likely to be of therapeutic benefit, such as chronic open-angle glaucoma, secondary glaucoma, and preoperatively in acute angle-closure glaucoma where lowering the intraocular pressure is desired before surgery.</IndicationAndUsage>
<Description>Methazolamide USP, a sulfonamide derivative, is a white or faintly yellow, crystalline powder having a slight odor, soluble in dimethylformamide, slightly soluble in acetone, very slightly soluble in water and in alcohol. The chemical name for methazolamide is: N-[5-(aminosulfonyl)-3-methyl-1,3,4-thiadiazol-2(3H)-ylidene]-acetamide and it has the following structural formula:. Each tablet, for oral administration, contains 25 mg or 50 mg methazolamide USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, dibasic calcium phosphate dihydrate, magnesium stearate, and microcrystalline cellulose.</Description>
</NDC>
</NDCList>