{
"NDC": [
{
"NDCCode": "49288-0264-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0264-1)",
"NDC11Code": "49288-0264-01",
"ProductNDC": "49288-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "White Hickory",
"NonProprietaryName": "White Hickory",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CARYA ALBA POLLEN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0264-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0264-2)",
"NDC11Code": "49288-0264-02",
"ProductNDC": "49288-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "White Hickory",
"NonProprietaryName": "White Hickory",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CARYA ALBA POLLEN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0264-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0264-3)",
"NDC11Code": "49288-0264-03",
"ProductNDC": "49288-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "White Hickory",
"NonProprietaryName": "White Hickory",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CARYA ALBA POLLEN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0264-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0264-4)",
"NDC11Code": "49288-0264-04",
"ProductNDC": "49288-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "White Hickory",
"NonProprietaryName": "White Hickory",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CARYA ALBA POLLEN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0264-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0264-5)",
"NDC11Code": "49288-0264-05",
"ProductNDC": "49288-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "White Hickory",
"NonProprietaryName": "White Hickory",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CARYA ALBA POLLEN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "0264-8200-10",
"PackageDescription": "40 BOX in 1 CASE (0264-8200-10) / 10 VIAL in 1 BOX / 2 mL in 1 VIAL (0264-8200-01) ",
"NDC11Code": "00264-8200-10",
"ProductNDC": "0264-8200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sugammadex",
"NonProprietaryName": "Sugammadex",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260728",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214279",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "SUGAMMADEX SODIUM",
"StrengthNumber": "200",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "gamma-Cyclodextrins [CS]",
"Status": "Active",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260728",
"SamplePackage": "N",
"IndicationAndUsage": "Sugammadex is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC’s BRIDION® (sugammadex) injection. However, due to Merck Sharp & Dohme LLC’s marketing exclusivity rights, this drug product is not labeled with that information.",
"Description": "Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6A,6B,6C,6D,6E,6F,6G,6H-Octakis-S-(2-carboxyethyl)- 6A,6B,6C,6D,6E,6F,6G,6H-octathio-γ-cyclodextrin sodium salt (1:8) with a molecular weight of 2178.01. The structural formula is. Sugammadex is supplied as a sterile, non-pyrogenic aqueous solution that is clear, colorless to slightly yellow-brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.8 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)]. This derivative is chemically designated as 6A,6B,6C,6D,6E,6F,6G-Heptakis-S-(2- carboxyethyl)- 6A,6B,6C,6D,6E,6F,6G-heptathio-γ-cyclodextrin sodium salt (1:7) with a molecular weight of 2067.90. The structural formula is."
},
{
"NDCCode": "0264-9379-88",
"PackageDescription": "10 AMPULE in 1 CARTON (0264-9379-88) / 2 mL in 1 AMPULE",
"NDC11Code": "00264-9379-88",
"ProductNDC": "0264-9379",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupivacaine Hydrochloride With Dextrose",
"NonProprietaryName": "Bupivacaine Hydrochloride With Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "SUBARACHNOID",
"StartMarketingDate": "20190402",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209087",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-05-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190402",
"SamplePackage": "N",
"IndicationAndUsage": "Bupivacaine Hydrochloride in Dextrose Injection, USP is indicated for subarachnoid injection in adults for the production of subarachnoid block (spinal anesthesia).",
"Description": "Bupivacaine Hydrochloride in Dextrose Injection, USP is an amide-local anesthetic and sterile hyperbaric aqueous solution. The route of administration for Bupivacaine Hydrochloride in Dextrose Injection, USP is by subarachnoid injection. Bupivacaine Hydrochloride contains bupivacaine hydrochloride, as the active pharmaceutical ingredient and also contains Dextrose, as baricity agent. Bupivacaine Hydrochloride (monohydrate) chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6- dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. Bupivacaine Hydrochloride (monohydrate) has a molecular formula of C18H28N2O·HCl·H2O and molecular weight of 342.90 g/mol and has the following structural formula. Dextrose chemical name is D-glucopyranose. Dextrose (anhydrous) has a molecular formula of C6H12O6, molecular weight of 180.16 g/mol and has the following structural formula. Bupivacaine Hydrochloride in Dextrose Injection, USP is a clear and colorless sterile hyperbaric solution. Each mL of Bupivacaine Hydrochloride in Dextrose Injection, USP contains 7.5 mg bupivacaine hydrochloride (anhydrous) (equivalent to 7.9 mg of bupivacaine hydrochloride monohydrate), 82.5 mg dextrose (anhydrous) as baricity agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. Bupivacaine Hydrochloride in Dextrose Injection, USP pH is between 4.0 and 6.5. The specific gravity of Bupivacaine Hydrochloride in Dextrose Injection, USP is between 1.030 and 1.035 at 25°C and 1.03 at 37°C. Bupivacaine Hydrochloride in Dextrose Injection, USP does not contain any preservatives."
},
{
"NDCCode": "10096-0264-2",
"PackageDescription": "1 TUBE in 1 CARTON (10096-0264-2) > 50 mL in 1 TUBE (10096-0264-1)",
"NDC11Code": "10096-0264-02",
"ProductNDC": "10096-0264",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Clearskin Professional",
"ProprietaryNameSuffix": "Acne Mark Treatment",
"NonProprietaryName": "Salicylic Acid",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110928",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333D",
"LabelerName": "Avon Products, Inc.",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": "1",
"StrengthUnit": "mL/50mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "USES: 1 For the treatment of acne."
},
{
"NDCCode": "11014-0264-1",
"PackageDescription": "6 POUCH in 1 CARTON (11014-0264-1) > 5 VIAL in 1 POUCH > 2 mL in 1 VIAL",
"NDC11Code": "11014-0264-01",
"ProductNDC": "11014-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budesonide Inhalation",
"NonProprietaryName": "Budesonide",
"DosageFormName": "SUSPENSION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20160804",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078404",
"LabelerName": "Catalent Pharma Solutions, LLC",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": "0.25",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-05-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160804",
"SamplePackage": "N"
},
{
"NDCCode": "15631-0264-2",
"PackageDescription": "400 PELLET in 1 PACKAGE (15631-0264-2) ",
"NDC11Code": "15631-0264-02",
"ProductNDC": "15631-0264",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lacticum Acidum",
"NonProprietaryName": "Lacticum Acidum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150905",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "LACTIC ACID, DL-",
"StrengthNumber": "2",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "17337-0264-1",
"PackageDescription": "1 BAG in 1 DRUM (17337-0264-1) > 1 BOTTLE, GLASS in 1 BAG > .2 kg in 1 BOTTLE, GLASS",
"NDC11Code": "17337-0264-01",
"ProductNDC": "17337-0264",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Teduglutide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20211027",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Olon S.p.A.",
"SubstanceName": "TEDUGLUTIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2021-10-29",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "27-OCT-21"
},
{
"NDCCode": "37662-0264-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-0264-2) ",
"NDC11Code": "37662-0264-02",
"ProductNDC": "37662-0264",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Chloroformum",
"NonProprietaryName": "Chloroformum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220601",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "CHLOROFORM",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220601",
"SamplePackage": "N"
},
{
"NDCCode": "50090-0264-2",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (50090-0264-2) ",
"NDC11Code": "50090-0264-02",
"ProductNDC": "50090-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19970911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040218",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-02-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N"
},
{
"NDCCode": "50436-0264-2",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (50436-0264-2)",
"NDC11Code": "50436-0264-02",
"ProductNDC": "50436-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Etodolac",
"NonProprietaryName": "Etodolac",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20000811",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075665",
"LabelerName": "Unit Dose Services",
"SubstanceName": "ETODOLAC",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-01-18",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "56152-0264-2",
"PackageDescription": "56.7 g in 1 TUBE (56152-0264-2) ",
"NDC11Code": "56152-0264-02",
"ProductNDC": "56152-0264",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Impeccable Skin Sunscreen Foundation Broad Spectrum Spf 30 Mocha",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241024",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Cosmetic Enterprises Ltd",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "15",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2025-10-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241024",
"SamplePackage": "N",
"IndicationAndUsage": "Stop use and ask a doctor if rash occurs."
},
{
"NDCCode": "62011-0264-2",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 BOX (62011-0264-2) > 100 CAPSULE in 1 BOTTLE, PLASTIC",
"NDC11Code": "62011-0264-02",
"ProductNDC": "62011-0264",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief",
"NonProprietaryName": "Diphenhydramine Hcl",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20151031",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Strategic Sourcing Services LLC",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20151031",
"SamplePackage": "N"
},
{
"NDCCode": "70000-0264-2",
"PackageDescription": "1 BOTTLE in 1 CARTON (70000-0264-2) > 150 mL in 1 BOTTLE",
"NDC11Code": "70000-0264-02",
"ProductNDC": "70000-0264",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Leader Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20170405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074937",
"LabelerName": "Cardinal Health 110, LLC. dba Leader",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "100",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-06-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20170627",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily: 1 relieves minor aches and pains due to the common cold, flu, sore throat, headache and toothache, 2 reduces fever."
},
{
"NDCCode": "71335-0264-2",
"PackageDescription": "30 TABLET, COATED in 1 BOTTLE (71335-0264-2) ",
"NDC11Code": "71335-0264-02",
"ProductNDC": "71335-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluvoxamine Maleate",
"NonProprietaryName": "Fluvoxamine Maleate",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110809",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021519",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "FLUVOXAMINE MALEATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180302",
"SamplePackage": "N",
"IndicationAndUsage": "Fluvoxamine Maleate Tablets are indicated for the treatment of obsessions and compulsions in patients with obsessive compulsive disorder (OCD) (1).",
"Description": "Fluvoxamine maleate is a selective serotonin (5-HT) reuptake inhibitor (SSRI) belonging to the chemical series, the 2-aminoethyl oxime ethers of aralkylketones. It is chemically designated as 5-methoxy-4′-(trifluoromethyl)valerophenone-(E)-O-(2-aminoethyl)oxime maleate (1:1) and has the empirical formula C15H21O2N2F3∙C4H4O4. Its molecular weight is 434.41. The structural formula is. Fluvoxamine maleate is a white to off white, odorless, crystalline powder which is sparingly soluble in water, freely soluble in ethanol and chloroform and practically insoluble in diethyl ether. Fluvoxamine Maleate Tablets are available in 25 mg, 50 mg and 100 mg strengths for oral administration. In addition to the active ingredient, fluvoxamine maleate, each tablet contains the following inactive ingredients: mannitol, polyethylene glycol, polyvinyl alcohol, pregelatinized starch (potato), silicon dioxide, sodium stearyl fumarate, starch (corn), talc, and titanium dioxide. The 50 mg and 100 mg tablets also contain synthetic iron oxides."
},
{
"NDCCode": "80425-0264-1",
"PackageDescription": "2 CASE in 1 CARTON (80425-0264-1) / 1 SYRINGE in 1 CASE / .3 mL in 1 SYRINGE",
"NDC11Code": "80425-0264-01",
"ProductNDC": "80425-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20230216",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020800",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".3",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230216",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine injection is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.",
"Description": "Epinephrine injection, USP 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP with patients and caregivers prior to use [see Patient Counseling Information (17)]."
},
{
"NDCCode": "0054-0264-24",
"PackageDescription": "10 CONTAINER in 1 CARTON (0054-0264-24) / 10 TABLET in 1 CONTAINER",
"NDC11Code": "00054-0264-24",
"ProductNDC": "0054-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074597",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20090729",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite."
},
{
"NDCCode": "0054-0264-25",
"PackageDescription": "100 TABLET in 1 BOTTLE (0054-0264-25) ",
"NDC11Code": "00054-0264-25",
"ProductNDC": "0054-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074597",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20090729",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite."
},
{
"NDCCode": "0093-0264-15",
"PackageDescription": "1 TUBE in 1 CARTON (0093-0264-15) / 15 g in 1 TUBE",
"NDC11Code": "00093-0264-15",
"ProductNDC": "0093-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinonide",
"NonProprietaryName": "Fluocinonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "19920501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA073481",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "FLUOCINONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920501",
"SamplePackage": "N",
"IndicationAndUsage": "The topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The topical corticosteroids are intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene) bis(oxy)]-,(6α, 11β, 16α)-. It has the following structural formula. C26H32F207 M.W. 494.5. Each gram of Fluocinonide Cream USP, 0.05% (Emulsified Base) contains: 0.5 mg fluocinonide, USP in a water-washable aqueous emollient base of stearyl alcohol, cetyl alcohol, mineral oil, propylene glycol, sorbitan monostearate, polysorbate 60, citric acid monohydrate and purified water. Each gram of Fluocinonide Cream USP, 0.05% contains: 0.5 mg fluocinonide, USP in a specially formulated cream base consisting of stearyl alcohol, polyethylene glycol 8000, propylene glycol, 1,2,6-hexanetriol and citric acid monohydrate. This white cream vehicle is greaseless, non-staining, anhydrous and completely water miscible. The base provides emollient and hydrophilic properties. In this formulation, the active ingredient is totally in solution. Each gram of Fluocinonide Ointment USP, 0.05% contains: 0.5 mg fluocinonide, USP in an ointment base consisting of white petrolatum, castor oil, and sorbitan sesquioleate. It provides the occlusive and emollient effects desirable in an ointment. In this formulation, the active ingredient is totally in solution."
},
{
"NDCCode": "0093-0264-30",
"PackageDescription": "1 TUBE in 1 CARTON (0093-0264-30) / 30 g in 1 TUBE",
"NDC11Code": "00093-0264-30",
"ProductNDC": "0093-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinonide",
"NonProprietaryName": "Fluocinonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "19920501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA073481",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "FLUOCINONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920501",
"SamplePackage": "N",
"IndicationAndUsage": "The topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The topical corticosteroids are intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene) bis(oxy)]-,(6α, 11β, 16α)-. It has the following structural formula. C26H32F207 M.W. 494.5. Each gram of Fluocinonide Cream USP, 0.05% (Emulsified Base) contains: 0.5 mg fluocinonide, USP in a water-washable aqueous emollient base of stearyl alcohol, cetyl alcohol, mineral oil, propylene glycol, sorbitan monostearate, polysorbate 60, citric acid monohydrate and purified water. Each gram of Fluocinonide Cream USP, 0.05% contains: 0.5 mg fluocinonide, USP in a specially formulated cream base consisting of stearyl alcohol, polyethylene glycol 8000, propylene glycol, 1,2,6-hexanetriol and citric acid monohydrate. This white cream vehicle is greaseless, non-staining, anhydrous and completely water miscible. The base provides emollient and hydrophilic properties. In this formulation, the active ingredient is totally in solution. Each gram of Fluocinonide Ointment USP, 0.05% contains: 0.5 mg fluocinonide, USP in an ointment base consisting of white petrolatum, castor oil, and sorbitan sesquioleate. It provides the occlusive and emollient effects desirable in an ointment. In this formulation, the active ingredient is totally in solution."
},
{
"NDCCode": "0093-0264-92",
"PackageDescription": "1 TUBE in 1 CARTON (0093-0264-92) / 60 g in 1 TUBE",
"NDC11Code": "00093-0264-92",
"ProductNDC": "0093-0264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluocinonide",
"NonProprietaryName": "Fluocinonide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "19920501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA073481",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "FLUOCINONIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920501",
"SamplePackage": "N",
"IndicationAndUsage": "The topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The topical corticosteroids are intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene) bis(oxy)]-,(6α, 11β, 16α)-. It has the following structural formula. C26H32F207 M.W. 494.5. Each gram of Fluocinonide Cream USP, 0.05% (Emulsified Base) contains: 0.5 mg fluocinonide, USP in a water-washable aqueous emollient base of stearyl alcohol, cetyl alcohol, mineral oil, propylene glycol, sorbitan monostearate, polysorbate 60, citric acid monohydrate and purified water. Each gram of Fluocinonide Cream USP, 0.05% contains: 0.5 mg fluocinonide, USP in a specially formulated cream base consisting of stearyl alcohol, polyethylene glycol 8000, propylene glycol, 1,2,6-hexanetriol and citric acid monohydrate. This white cream vehicle is greaseless, non-staining, anhydrous and completely water miscible. The base provides emollient and hydrophilic properties. In this formulation, the active ingredient is totally in solution. Each gram of Fluocinonide Ointment USP, 0.05% contains: 0.5 mg fluocinonide, USP in an ointment base consisting of white petrolatum, castor oil, and sorbitan sesquioleate. It provides the occlusive and emollient effects desirable in an ointment. In this formulation, the active ingredient is totally in solution."
},
{
"NDCCode": "0264-1009-90",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-1009-90) / 100 mL in 1 CONTAINER",
"NDC11Code": "00264-1009-90",
"ProductNDC": "0264-1009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209705",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam in Sodium Chloride Injection is indicated for adjunct therapy in adults (greater than or equal to 16 years of age) with the following seizure types when oral administration is temporarily not feasible: 1 Partial-onset seizures (1.1) , 2 Myoclonic seizures in patients with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures (1.3).",
"Description": "Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port container. This container closure is not made with natural rubber latex, PVC or DEHP. 500 mg/100 mL: One 100 mL fill container contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL fill container contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL fill container contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition. Each is covered by a tamperproof barrier. Refer to the DIRECTIONS FOR USE of the container to properly identify the ports. No vapor barrier is necessary."
},
{
"NDCCode": "0264-1509-90",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-1509-90) / 100 mL in 1 CONTAINER",
"NDC11Code": "00264-1509-90",
"ProductNDC": "0264-1509",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209705",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2025-04-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240513",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam in Sodium Chloride Injection is indicated for adjunct therapy in adults (greater than or equal to 16 years of age) with the following seizure types when oral administration is temporarily not feasible: 1 Partial-onset seizures (1.1) , 2 Myoclonic seizures in patients with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures (1.3).",
"Description": "Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port container. This container closure is not made with natural rubber latex, PVC or DEHP. 500 mg/100 mL: One 100 mL fill container contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL fill container contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL fill container contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition. Each is covered by a tamperproof barrier. Refer to the DIRECTIONS FOR USE of the container to properly identify the ports. No vapor barrier is necessary."
},
{
"NDCCode": "0264-1510-31",
"PackageDescription": "84 CONTAINER in 1 CASE (0264-1510-31) / 50 mL in 1 CONTAINER",
"NDC11Code": "00264-1510-31",
"ProductNDC": "0264-1510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19731221",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016730",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19731221",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection USP (5%) is a sterile, nonpyrogenic, and isotonic solution and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration. The formula of the active ingredient is. Each mL of Dextrose Injection USP (5%) contains. Hydrous Dextrose USP 50 mg; Water for Injection USP qs. pH: 4.5 (3.5-6.5). Calculated Osmolarity: 250 mOsmol/liter. Calories per 100 mL: 17. Dextrose is derived from corn. Not made with natural rubber latex, PVC, or DEHP. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class VI testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition site. Each is covered by a tamperproof barrier [see Dosage and Administration (2.2)]. No vapor barrier is necessary."
},
{
"NDCCode": "0264-1510-32",
"PackageDescription": "64 CONTAINER in 1 CASE (0264-1510-32) / 100 mL in 1 CONTAINER",
"NDC11Code": "00264-1510-32",
"ProductNDC": "0264-1510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19731221",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016730",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19731221",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection USP (5%) is a sterile, nonpyrogenic, and isotonic solution and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration. The formula of the active ingredient is. Each mL of Dextrose Injection USP (5%) contains. Hydrous Dextrose USP 50 mg; Water for Injection USP qs. pH: 4.5 (3.5-6.5). Calculated Osmolarity: 250 mOsmol/liter. Calories per 100 mL: 17. Dextrose is derived from corn. Not made with natural rubber latex, PVC, or DEHP. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class VI testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition site. Each is covered by a tamperproof barrier [see Dosage and Administration (2.2)]. No vapor barrier is necessary."
},
{
"NDCCode": "0264-1510-36",
"PackageDescription": "116 CONTAINER in 1 CASE (0264-1510-36) / 25 mL in 1 CONTAINER",
"NDC11Code": "00264-1510-36",
"ProductNDC": "0264-1510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19731221",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA016730",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19731221",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection (5%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.",
"Description": "Dextrose Injection USP (5%) is a sterile, nonpyrogenic, and isotonic solution and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration. The formula of the active ingredient is. Each mL of Dextrose Injection USP (5%) contains. Hydrous Dextrose USP 50 mg; Water for Injection USP qs. pH: 4.5 (3.5-6.5). Calculated Osmolarity: 250 mOsmol/liter. Calories per 100 mL: 17. Dextrose is derived from corn. Not made with natural rubber latex, PVC, or DEHP. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class VI testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition site. Each is covered by a tamperproof barrier [see Dosage and Administration (2.2)]. No vapor barrier is necessary."
},
{
"NDCCode": "0264-1909-55",
"PackageDescription": "12 CARTON in 1 CASE (0264-1909-55) > 1 CONTAINER in 1 CARTON > 250 mL in 1 CONTAINER",
"NDC11Code": "00264-1909-55",
"ProductNDC": "0264-1909",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nephramine",
"NonProprietaryName": "Histidine, Isoleucine, Leucine, Lysine, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Cysteine, And Sodium Bisulfite",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19780224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017766",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HISTIDINE; ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; CYSTEINE HYDROCHLORIDE",
"StrengthNumber": ".25; .56; .88; .64; .88; .88; .4; .2; .64; .014",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2021-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "19780224",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0264-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0264-1)</PackageDescription>
<NDC11Code>49288-0264-01</NDC11Code>
<ProductNDC>49288-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>White Hickory</ProprietaryName>
<NonProprietaryName>White Hickory</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CARYA ALBA POLLEN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0264-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0264-2)</PackageDescription>
<NDC11Code>49288-0264-02</NDC11Code>
<ProductNDC>49288-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>White Hickory</ProprietaryName>
<NonProprietaryName>White Hickory</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CARYA ALBA POLLEN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0264-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0264-3)</PackageDescription>
<NDC11Code>49288-0264-03</NDC11Code>
<ProductNDC>49288-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>White Hickory</ProprietaryName>
<NonProprietaryName>White Hickory</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CARYA ALBA POLLEN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0264-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0264-4)</PackageDescription>
<NDC11Code>49288-0264-04</NDC11Code>
<ProductNDC>49288-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>White Hickory</ProprietaryName>
<NonProprietaryName>White Hickory</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CARYA ALBA POLLEN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0264-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0264-5)</PackageDescription>
<NDC11Code>49288-0264-05</NDC11Code>
<ProductNDC>49288-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>White Hickory</ProprietaryName>
<NonProprietaryName>White Hickory</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CARYA ALBA POLLEN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>0264-8200-10</NDCCode>
<PackageDescription>40 BOX in 1 CASE (0264-8200-10) / 10 VIAL in 1 BOX / 2 mL in 1 VIAL (0264-8200-01) </PackageDescription>
<NDC11Code>00264-8200-10</NDC11Code>
<ProductNDC>0264-8200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sugammadex</ProprietaryName>
<NonProprietaryName>Sugammadex</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260728</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214279</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>SUGAMMADEX SODIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>gamma-Cyclodextrins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sugammadex is indicated for the reversal of neuromuscular blockade induced by rocuronium bromide and vecuronium bromide in adult and pediatric patients aged 2 years and older undergoing surgery. Additional pediatric use information is approved for Merck Sharp & Dohme LLC’s BRIDION® (sugammadex) injection. However, due to Merck Sharp & Dohme LLC’s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
<Description>Sugammadex injection, for intravenous use, contains sugammadex sodium, a modified gamma cyclodextrin chemically designated as 6A,6B,6C,6D,6E,6F,6G,6H-Octakis-S-(2-carboxyethyl)- 6A,6B,6C,6D,6E,6F,6G,6H-octathio-γ-cyclodextrin sodium salt (1:8) with a molecular weight of 2178.01. The structural formula is. Sugammadex is supplied as a sterile, non-pyrogenic aqueous solution that is clear, colorless to slightly yellow-brown for intravenous injection only. Each mL contains 100 mg sugammadex, which is equivalent to 108.8 mg sugammadex sodium. The aqueous solution is adjusted to a pH of between 7 and 8 with hydrochloric acid and/or sodium hydroxide. The osmolality of the product is between 300 and 500 mOsmol/kg. Sugammadex may contain up to 7 mg/mL of the mono OH-derivative of sugammadex [see Clinical Pharmacology (12.2)]. This derivative is chemically designated as 6A,6B,6C,6D,6E,6F,6G-Heptakis-S-(2- carboxyethyl)- 6A,6B,6C,6D,6E,6F,6G-heptathio-γ-cyclodextrin sodium salt (1:7) with a molecular weight of 2067.90. The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>0264-9379-88</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0264-9379-88) / 2 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00264-9379-88</NDC11Code>
<ProductNDC>0264-9379</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupivacaine Hydrochloride With Dextrose</ProprietaryName>
<NonProprietaryName>Bupivacaine Hydrochloride With Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBARACHNOID</RouteName>
<StartMarketingDate>20190402</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209087</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupivacaine Hydrochloride in Dextrose Injection, USP is indicated for subarachnoid injection in adults for the production of subarachnoid block (spinal anesthesia).</IndicationAndUsage>
<Description>Bupivacaine Hydrochloride in Dextrose Injection, USP is an amide-local anesthetic and sterile hyperbaric aqueous solution. The route of administration for Bupivacaine Hydrochloride in Dextrose Injection, USP is by subarachnoid injection. Bupivacaine Hydrochloride contains bupivacaine hydrochloride, as the active pharmaceutical ingredient and also contains Dextrose, as baricity agent. Bupivacaine Hydrochloride (monohydrate) chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6- dimethylphenyl)-, monohydrochloride, monohydrate, a white crystalline powder that is freely soluble in 95 percent ethanol, soluble in water, and slightly soluble in chloroform or acetone. Bupivacaine Hydrochloride (monohydrate) has a molecular formula of C18H28N2O·HCl·H2O and molecular weight of 342.90 g/mol and has the following structural formula. Dextrose chemical name is D-glucopyranose. Dextrose (anhydrous) has a molecular formula of C6H12O6, molecular weight of 180.16 g/mol and has the following structural formula. Bupivacaine Hydrochloride in Dextrose Injection, USP is a clear and colorless sterile hyperbaric solution. Each mL of Bupivacaine Hydrochloride in Dextrose Injection, USP contains 7.5 mg bupivacaine hydrochloride (anhydrous) (equivalent to 7.9 mg of bupivacaine hydrochloride monohydrate), 82.5 mg dextrose (anhydrous) as baricity agent, and sodium hydroxide and hydrochloric acid as pH adjusters in water for injection. Bupivacaine Hydrochloride in Dextrose Injection, USP pH is between 4.0 and 6.5. The specific gravity of Bupivacaine Hydrochloride in Dextrose Injection, USP is between 1.030 and 1.035 at 25°C and 1.03 at 37°C. Bupivacaine Hydrochloride in Dextrose Injection, USP does not contain any preservatives.</Description>
</NDC>
<NDC>
<NDCCode>10096-0264-2</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (10096-0264-2) > 50 mL in 1 TUBE (10096-0264-1)</PackageDescription>
<NDC11Code>10096-0264-02</NDC11Code>
<ProductNDC>10096-0264</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Clearskin Professional</ProprietaryName>
<ProprietaryNameSuffix>Acne Mark Treatment</ProprietaryNameSuffix>
<NonProprietaryName>Salicylic Acid</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110928</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333D</ApplicationNumber>
<LabelerName>Avon Products, Inc.</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/50mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>USES: 1 For the treatment of acne.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11014-0264-1</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (11014-0264-1) > 5 VIAL in 1 POUCH > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>11014-0264-01</NDC11Code>
<ProductNDC>11014-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budesonide Inhalation</ProprietaryName>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20160804</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078404</ApplicationNumber>
<LabelerName>Catalent Pharma Solutions, LLC</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>0.25</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-05-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>15631-0264-2</NDCCode>
<PackageDescription>400 PELLET in 1 PACKAGE (15631-0264-2) </PackageDescription>
<NDC11Code>15631-0264-02</NDC11Code>
<ProductNDC>15631-0264</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lacticum Acidum</ProprietaryName>
<NonProprietaryName>Lacticum Acidum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150905</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>LACTIC ACID, DL-</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>17337-0264-1</NDCCode>
<PackageDescription>1 BAG in 1 DRUM (17337-0264-1) > 1 BOTTLE, GLASS in 1 BAG > .2 kg in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>17337-0264-01</NDC11Code>
<ProductNDC>17337-0264</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Teduglutide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20211027</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Olon S.p.A.</LabelerName>
<SubstanceName>TEDUGLUTIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2021-10-29</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>27-OCT-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>37662-0264-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-0264-2) </PackageDescription>
<NDC11Code>37662-0264-02</NDC11Code>
<ProductNDC>37662-0264</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Chloroformum</ProprietaryName>
<NonProprietaryName>Chloroformum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220601</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>CHLOROFORM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-0264-2</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (50090-0264-2) </PackageDescription>
<NDC11Code>50090-0264-02</NDC11Code>
<ProductNDC>50090-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19970911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040218</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-02-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50436-0264-2</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (50436-0264-2)</PackageDescription>
<NDC11Code>50436-0264-02</NDC11Code>
<ProductNDC>50436-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Etodolac</ProprietaryName>
<NonProprietaryName>Etodolac</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20000811</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075665</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>ETODOLAC</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-01-18</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>56152-0264-2</NDCCode>
<PackageDescription>56.7 g in 1 TUBE (56152-0264-2) </PackageDescription>
<NDC11Code>56152-0264-02</NDC11Code>
<ProductNDC>56152-0264</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Impeccable Skin Sunscreen Foundation Broad Spectrum Spf 30 Mocha</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241024</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Cosmetic Enterprises Ltd</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241024</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Stop use and ask a doctor if rash occurs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>62011-0264-2</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 BOX (62011-0264-2) > 100 CAPSULE in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>62011-0264-02</NDC11Code>
<ProductNDC>62011-0264</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151031</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Strategic Sourcing Services LLC</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70000-0264-2</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70000-0264-2) > 150 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70000-0264-02</NDC11Code>
<ProductNDC>70000-0264</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Leader Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074937</ApplicationNumber>
<LabelerName>Cardinal Health 110, LLC. dba Leader</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170627</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily: 1 relieves minor aches and pains due to the common cold, flu, sore throat, headache and toothache, 2 reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-0264-2</NDCCode>
<PackageDescription>30 TABLET, COATED in 1 BOTTLE (71335-0264-2) </PackageDescription>
<NDC11Code>71335-0264-02</NDC11Code>
<ProductNDC>71335-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluvoxamine Maleate</ProprietaryName>
<NonProprietaryName>Fluvoxamine Maleate</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110809</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021519</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>FLUVOXAMINE MALEATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluvoxamine Maleate Tablets are indicated for the treatment of obsessions and compulsions in patients with obsessive compulsive disorder (OCD) (1).</IndicationAndUsage>
<Description>Fluvoxamine maleate is a selective serotonin (5-HT) reuptake inhibitor (SSRI) belonging to the chemical series, the 2-aminoethyl oxime ethers of aralkylketones. It is chemically designated as 5-methoxy-4′-(trifluoromethyl)valerophenone-(E)-O-(2-aminoethyl)oxime maleate (1:1) and has the empirical formula C15H21O2N2F3∙C4H4O4. Its molecular weight is 434.41. The structural formula is. Fluvoxamine maleate is a white to off white, odorless, crystalline powder which is sparingly soluble in water, freely soluble in ethanol and chloroform and practically insoluble in diethyl ether. Fluvoxamine Maleate Tablets are available in 25 mg, 50 mg and 100 mg strengths for oral administration. In addition to the active ingredient, fluvoxamine maleate, each tablet contains the following inactive ingredients: mannitol, polyethylene glycol, polyvinyl alcohol, pregelatinized starch (potato), silicon dioxide, sodium stearyl fumarate, starch (corn), talc, and titanium dioxide. The 50 mg and 100 mg tablets also contain synthetic iron oxides.</Description>
</NDC>
<NDC>
<NDCCode>80425-0264-1</NDCCode>
<PackageDescription>2 CASE in 1 CARTON (80425-0264-1) / 1 SYRINGE in 1 CASE / .3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>80425-0264-01</NDC11Code>
<ProductNDC>80425-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230216</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020800</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.3</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine injection is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.</IndicationAndUsage>
<Description>Epinephrine injection, USP 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP 0.3 mg and epinephrine injection, USP 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP with patients and caregivers prior to use [see Patient Counseling Information (17)].</Description>
</NDC>
<NDC>
<NDCCode>0054-0264-24</NDCCode>
<PackageDescription>10 CONTAINER in 1 CARTON (0054-0264-24) / 10 TABLET in 1 CONTAINER</PackageDescription>
<NDC11Code>00054-0264-24</NDC11Code>
<ProductNDC>0054-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074597</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite.</Description>
</NDC>
<NDC>
<NDCCode>0054-0264-25</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0054-0264-25) </PackageDescription>
<NDC11Code>00054-0264-25</NDC11Code>
<ProductNDC>0054-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074597</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite.</Description>
</NDC>
<NDC>
<NDCCode>0093-0264-15</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0093-0264-15) / 15 g in 1 TUBE</PackageDescription>
<NDC11Code>00093-0264-15</NDC11Code>
<ProductNDC>0093-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinonide</ProprietaryName>
<NonProprietaryName>Fluocinonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19920501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA073481</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>FLUOCINONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>The topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The topical corticosteroids are intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene) bis(oxy)]-,(6α, 11β, 16α)-. It has the following structural formula. C26H32F207 M.W. 494.5. Each gram of Fluocinonide Cream USP, 0.05% (Emulsified Base) contains: 0.5 mg fluocinonide, USP in a water-washable aqueous emollient base of stearyl alcohol, cetyl alcohol, mineral oil, propylene glycol, sorbitan monostearate, polysorbate 60, citric acid monohydrate and purified water. Each gram of Fluocinonide Cream USP, 0.05% contains: 0.5 mg fluocinonide, USP in a specially formulated cream base consisting of stearyl alcohol, polyethylene glycol 8000, propylene glycol, 1,2,6-hexanetriol and citric acid monohydrate. This white cream vehicle is greaseless, non-staining, anhydrous and completely water miscible. The base provides emollient and hydrophilic properties. In this formulation, the active ingredient is totally in solution. Each gram of Fluocinonide Ointment USP, 0.05% contains: 0.5 mg fluocinonide, USP in an ointment base consisting of white petrolatum, castor oil, and sorbitan sesquioleate. It provides the occlusive and emollient effects desirable in an ointment. In this formulation, the active ingredient is totally in solution.</Description>
</NDC>
<NDC>
<NDCCode>0093-0264-30</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0093-0264-30) / 30 g in 1 TUBE</PackageDescription>
<NDC11Code>00093-0264-30</NDC11Code>
<ProductNDC>0093-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinonide</ProprietaryName>
<NonProprietaryName>Fluocinonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19920501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA073481</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>FLUOCINONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>The topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The topical corticosteroids are intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene) bis(oxy)]-,(6α, 11β, 16α)-. It has the following structural formula. C26H32F207 M.W. 494.5. Each gram of Fluocinonide Cream USP, 0.05% (Emulsified Base) contains: 0.5 mg fluocinonide, USP in a water-washable aqueous emollient base of stearyl alcohol, cetyl alcohol, mineral oil, propylene glycol, sorbitan monostearate, polysorbate 60, citric acid monohydrate and purified water. Each gram of Fluocinonide Cream USP, 0.05% contains: 0.5 mg fluocinonide, USP in a specially formulated cream base consisting of stearyl alcohol, polyethylene glycol 8000, propylene glycol, 1,2,6-hexanetriol and citric acid monohydrate. This white cream vehicle is greaseless, non-staining, anhydrous and completely water miscible. The base provides emollient and hydrophilic properties. In this formulation, the active ingredient is totally in solution. Each gram of Fluocinonide Ointment USP, 0.05% contains: 0.5 mg fluocinonide, USP in an ointment base consisting of white petrolatum, castor oil, and sorbitan sesquioleate. It provides the occlusive and emollient effects desirable in an ointment. In this formulation, the active ingredient is totally in solution.</Description>
</NDC>
<NDC>
<NDCCode>0093-0264-92</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0093-0264-92) / 60 g in 1 TUBE</PackageDescription>
<NDC11Code>00093-0264-92</NDC11Code>
<ProductNDC>0093-0264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluocinonide</ProprietaryName>
<NonProprietaryName>Fluocinonide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19920501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA073481</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>FLUOCINONIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>The topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The topical corticosteroids are intended for topical administration. The active component is the corticosteroid fluocinonide, which is the 21-acetate ester of fluocinolone acetonide and has the chemical name pregna-1,4-diene-3,20-dione,21-(acetyloxy)-6,9-difluoro-11-hydroxy-16,17-[(1-methylethylidene) bis(oxy)]-,(6α, 11β, 16α)-. It has the following structural formula. C26H32F207 M.W. 494.5. Each gram of Fluocinonide Cream USP, 0.05% (Emulsified Base) contains: 0.5 mg fluocinonide, USP in a water-washable aqueous emollient base of stearyl alcohol, cetyl alcohol, mineral oil, propylene glycol, sorbitan monostearate, polysorbate 60, citric acid monohydrate and purified water. Each gram of Fluocinonide Cream USP, 0.05% contains: 0.5 mg fluocinonide, USP in a specially formulated cream base consisting of stearyl alcohol, polyethylene glycol 8000, propylene glycol, 1,2,6-hexanetriol and citric acid monohydrate. This white cream vehicle is greaseless, non-staining, anhydrous and completely water miscible. The base provides emollient and hydrophilic properties. In this formulation, the active ingredient is totally in solution. Each gram of Fluocinonide Ointment USP, 0.05% contains: 0.5 mg fluocinonide, USP in an ointment base consisting of white petrolatum, castor oil, and sorbitan sesquioleate. It provides the occlusive and emollient effects desirable in an ointment. In this formulation, the active ingredient is totally in solution.</Description>
</NDC>
<NDC>
<NDCCode>0264-1009-90</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-1009-90) / 100 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1009-90</NDC11Code>
<ProductNDC>0264-1009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209705</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam in Sodium Chloride Injection is indicated for adjunct therapy in adults (greater than or equal to 16 years of age) with the following seizure types when oral administration is temporarily not feasible: 1 Partial-onset seizures (1.1) , 2 Myoclonic seizures in patients with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures (1.3).</IndicationAndUsage>
<Description>Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port container. This container closure is not made with natural rubber latex, PVC or DEHP. 500 mg/100 mL: One 100 mL fill container contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL fill container contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL fill container contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition. Each is covered by a tamperproof barrier. Refer to the DIRECTIONS FOR USE of the container to properly identify the ports. No vapor barrier is necessary.</Description>
</NDC>
<NDC>
<NDCCode>0264-1509-90</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-1509-90) / 100 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1509-90</NDC11Code>
<ProductNDC>0264-1509</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209705</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam in Sodium Chloride Injection is indicated for adjunct therapy in adults (greater than or equal to 16 years of age) with the following seizure types when oral administration is temporarily not feasible: 1 Partial-onset seizures (1.1) , 2 Myoclonic seizures in patients with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures (1.3).</IndicationAndUsage>
<Description>Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port container. This container closure is not made with natural rubber latex, PVC or DEHP. 500 mg/100 mL: One 100 mL fill container contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL fill container contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL fill container contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition. Each is covered by a tamperproof barrier. Refer to the DIRECTIONS FOR USE of the container to properly identify the ports. No vapor barrier is necessary.</Description>
</NDC>
<NDC>
<NDCCode>0264-1510-31</NDCCode>
<PackageDescription>84 CONTAINER in 1 CASE (0264-1510-31) / 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1510-31</NDC11Code>
<ProductNDC>0264-1510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19731221</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016730</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19731221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection USP (5%) is a sterile, nonpyrogenic, and isotonic solution and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration. The formula of the active ingredient is. Each mL of Dextrose Injection USP (5%) contains. Hydrous Dextrose USP 50 mg; Water for Injection USP qs. pH: 4.5 (3.5-6.5). Calculated Osmolarity: 250 mOsmol/liter. Calories per 100 mL: 17. Dextrose is derived from corn. Not made with natural rubber latex, PVC, or DEHP. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class VI testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition site. Each is covered by a tamperproof barrier [see Dosage and Administration (2.2)]. No vapor barrier is necessary.</Description>
</NDC>
<NDC>
<NDCCode>0264-1510-32</NDCCode>
<PackageDescription>64 CONTAINER in 1 CASE (0264-1510-32) / 100 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1510-32</NDC11Code>
<ProductNDC>0264-1510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19731221</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016730</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19731221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection USP (5%) is a sterile, nonpyrogenic, and isotonic solution and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration. The formula of the active ingredient is. Each mL of Dextrose Injection USP (5%) contains. Hydrous Dextrose USP 50 mg; Water for Injection USP qs. pH: 4.5 (3.5-6.5). Calculated Osmolarity: 250 mOsmol/liter. Calories per 100 mL: 17. Dextrose is derived from corn. Not made with natural rubber latex, PVC, or DEHP. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class VI testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition site. Each is covered by a tamperproof barrier [see Dosage and Administration (2.2)]. No vapor barrier is necessary.</Description>
</NDC>
<NDC>
<NDCCode>0264-1510-36</NDCCode>
<PackageDescription>116 CONTAINER in 1 CASE (0264-1510-36) / 25 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1510-36</NDC11Code>
<ProductNDC>0264-1510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19731221</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA016730</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19731221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection (5%) is indicated as a source of water and calories in adult and pediatric patients, and may also be used as a diluent for reconstitution of a powder or liquid drug product.</IndicationAndUsage>
<Description>Dextrose Injection USP (5%) is a sterile, nonpyrogenic, and isotonic solution and contains no bacteriostatic or antimicrobial agents. This product is intended for intravenous administration. The formula of the active ingredient is. Each mL of Dextrose Injection USP (5%) contains. Hydrous Dextrose USP 50 mg; Water for Injection USP qs. pH: 4.5 (3.5-6.5). Calculated Osmolarity: 250 mOsmol/liter. Calories per 100 mL: 17. Dextrose is derived from corn. Not made with natural rubber latex, PVC, or DEHP. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class VI testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The container/solution unit is a closed system and is not dependent upon entry of external air during administration. The container has two ports, one is for the intravenous administration set and the other is a medication addition site. Each is covered by a tamperproof barrier [see Dosage and Administration (2.2)]. No vapor barrier is necessary.</Description>
</NDC>
<NDC>
<NDCCode>0264-1909-55</NDCCode>
<PackageDescription>12 CARTON in 1 CASE (0264-1909-55) > 1 CONTAINER in 1 CARTON > 250 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-1909-55</NDC11Code>
<ProductNDC>0264-1909</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nephramine</ProprietaryName>
<NonProprietaryName>Histidine, Isoleucine, Leucine, Lysine, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Cysteine, And Sodium Bisulfite</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19780224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017766</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HISTIDINE; ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; CYSTEINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.25; .56; .88; .64; .88; .88; .4; .2; .64; .014</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19780224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>