{
"NDC": [
{
"NDCCode": "49288-0265-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0265-4)",
"NDC11Code": "49288-0265-04",
"ProductNDC": "49288-0265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "White Hickory",
"NonProprietaryName": "White Hickory",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CARYA ALBA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0265-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0265-1)",
"NDC11Code": "49288-0265-01",
"ProductNDC": "49288-0265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "White Hickory",
"NonProprietaryName": "White Hickory",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CARYA ALBA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0265-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0265-2)",
"NDC11Code": "49288-0265-02",
"ProductNDC": "49288-0265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "White Hickory",
"NonProprietaryName": "White Hickory",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CARYA ALBA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0265-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0265-3)",
"NDC11Code": "49288-0265-03",
"ProductNDC": "49288-0265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "White Hickory",
"NonProprietaryName": "White Hickory",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CARYA ALBA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0265-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0265-5)",
"NDC11Code": "49288-0265-05",
"ProductNDC": "49288-0265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "White Hickory",
"NonProprietaryName": "White Hickory",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "CARYA ALBA POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "13630-0265-4",
"PackageDescription": "198 mL in 1 CAN (13630-0265-4) ",
"NDC11Code": "13630-0265-04",
"ProductNDC": "13630-0265",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Australian Gold",
"ProprietaryNameSuffix": "Instant Bronzer Broad Spectrum Spf 30",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191211",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "M020",
"LabelerName": "Prime Packaging, Inc.",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "25.8; 64.5; 43; 43",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL",
"Status": "Deprecated",
"LastUpdate": "2024-05-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20191211",
"SamplePackage": "N",
"IndicationAndUsage": ": 1 helps prevent sunburn, 2 if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "15631-0265-4",
"PackageDescription": "2500 PELLET in 1 PACKAGE (15631-0265-4) ",
"NDC11Code": "15631-0265-04",
"ProductNDC": "15631-0265",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lamium Album",
"NonProprietaryName": "Lamium Album",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150905",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "LAMIUM ALBUM",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "37662-0265-4",
"PackageDescription": "10000 PELLET in 1 BOTTLE, GLASS (37662-0265-4) ",
"NDC11Code": "37662-0265-04",
"ProductNDC": "37662-0265",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Chloroformum",
"NonProprietaryName": "Chloroformum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220601",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "CHLOROFORM",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2022-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220601",
"SamplePackage": "N"
},
{
"NDCCode": "58443-0265-4",
"PackageDescription": "177 mL in 1 TUBE (58443-0265-4) ",
"NDC11Code": "58443-0265-04",
"ProductNDC": "58443-0265",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Australian Gold",
"ProprietaryNameSuffix": "Botanicals Sunscreen 70 Minerals",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181029",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Prime Enterprises Inc.",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "43.604; 49.55",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-09-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181029",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "71335-0265-4",
"PackageDescription": "28 TABLET in 1 BOTTLE (71335-0265-4) ",
"NDC11Code": "71335-0265-04",
"ProductNDC": "71335-0265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077471",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20100621",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve hydromorphone hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia."
},
{
"NDCCode": "0054-0265-25",
"PackageDescription": "100 TABLET in 1 BOTTLE (0054-0265-25) ",
"NDC11Code": "00054-0265-25",
"ProductNDC": "0054-0265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydromorphone Hydrochloride",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090729",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074597",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20090729",
"SamplePackage": "N",
"IndicationAndUsage": "Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite."
},
{
"NDCCode": "0168-0265-15",
"PackageDescription": "15 g in 1 TUBE (0168-0265-15) ",
"NDC11Code": "00168-0265-15",
"ProductNDC": "0168-0265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Dipropionate",
"NonProprietaryName": "Betamethasone Dipropionate",
"DosageFormName": "CREAM, AUGMENTED",
"RouteName": "TOPICAL",
"StartMarketingDate": "20031209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076215",
"LabelerName": "E. Fougera & Co. a division of Fougera Pharmaceuticals Inc.",
"SubstanceName": "BETAMETHASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20031209",
"SamplePackage": "N",
"IndicationAndUsage": "Betamethasone Dipropionate Cream USP, 0.05% (Augmented) is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.",
"Description": "Betamethasone Dipropionate Cream USP 0.05%, (Augmented), contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use in a white to off-white cream base. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the molecular formula C28H37FO7, a molecular weight of 504.6, and the following structural formula. Betamethasone dipropionate is a white to creamy white, odorless crystalline powder, insoluble in water. Each gram of Betamethasone Dipropionate Cream USP, 0.05% (Augmented), contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in a white to off-white cream base of purified water, chlorocresol, white petrolatum, white wax (beeswax), cyclomethicone, sorbitol solution, glyceryl monooleate, propylene glycol, ceteareth-30, carbomer 980, and sodium hydroxide."
},
{
"NDCCode": "0168-0265-50",
"PackageDescription": "50 g in 1 TUBE (0168-0265-50) ",
"NDC11Code": "00168-0265-50",
"ProductNDC": "0168-0265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Dipropionate",
"NonProprietaryName": "Betamethasone Dipropionate",
"DosageFormName": "CREAM, AUGMENTED",
"RouteName": "TOPICAL",
"StartMarketingDate": "20031209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076215",
"LabelerName": "E. Fougera & Co. a division of Fougera Pharmaceuticals Inc.",
"SubstanceName": "BETAMETHASONE DIPROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20031209",
"SamplePackage": "N",
"IndicationAndUsage": "Betamethasone Dipropionate Cream USP, 0.05% (Augmented) is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.",
"Description": "Betamethasone Dipropionate Cream USP 0.05%, (Augmented), contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use in a white to off-white cream base. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the molecular formula C28H37FO7, a molecular weight of 504.6, and the following structural formula. Betamethasone dipropionate is a white to creamy white, odorless crystalline powder, insoluble in water. Each gram of Betamethasone Dipropionate Cream USP, 0.05% (Augmented), contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in a white to off-white cream base of purified water, chlorocresol, white petrolatum, white wax (beeswax), cyclomethicone, sorbitol solution, glyceryl monooleate, propylene glycol, ceteareth-30, carbomer 980, and sodium hydroxide."
},
{
"NDCCode": "0378-0265-91",
"PackageDescription": "60 CAPSULE in 1 BOTTLE, PLASTIC (0378-0265-91) ",
"NDC11Code": "00378-0265-91",
"ProductNDC": "0378-0265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dabigatran Etexilate",
"NonProprietaryName": "Dabigatran Etexilate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250225",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208067",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "DABIGATRAN ETEXILATE MESYLATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250225",
"SamplePackage": "N",
"IndicationAndUsage": "Dabigatran etexilate capsules are a direct thrombin inhibitor indicated: : 1 To reduce the risk of stroke and systemic embolism in adult patients with non-valvular atrial fibrillation (1.1) , 2 For the treatment of deep venous thrombosis (DVT) and pulmonary embolism (PE) in adult patients who have been treated with a parenteral anticoagulant for 5-10 days (1.2) , 3 To reduce the risk of recurrence of DVT and PE in adult patients who have been previously treated (1.3), 4 For the prophylaxis of DVT and PE in adult patients who have undergone hip replacement surgery (1.4), 5 For the treatment of venous thromboembolic events (VTE) in pediatric patients 8 to less than 18 years of age who have been treated with a parenteral anticoagulant for at least 5 days (1.5), 6 To reduce the risk of recurrence of VTE in pediatric patients 8 to less than 18 years of age who have been previously treated (1.6).",
"Description": "The chemical name for dabigatran etexilate mesylate, a direct thrombin inhibitor, is Ethyl 3-{[(2-{[(4-{[(hexyloxy)carbonyl]carbamimidoyl}phenyl)amino]methyl}-1-methyl-1H-benzimidazol-5-yl)carbonyl](pyridin-2-yl)amino}propanoate, monomethanesulfonate. The empirical formula is C34H41N7O5CH4O3S and the molecular weight is 723.86 (mesylate salt), 627.75 (free base). The structural formula is. Dabigatran etexilate mesylate is a white to yellow powder. A saturated solution in pure water has a solubility of 1.8 mg/mL. It is freely soluble in methanol, slightly soluble in ethanol, and sparingly soluble in isopropanol. Dabigatran etexilate capsules are supplied in 75 mg and 150 mg strengths for oral administration. Each capsule contains dabigatran etexilate mesylate as the active ingredient: 150 mg dabigatran etexilate (equivalent to 172.95 mg dabigatran etexilate mesylate) or 75 mg dabigatran etexilate (equivalent to 86.48 mg dabigatran etexilate mesylate) along with the following inactive ingredients: colloidal silicon dioxide, crospovidone, fumaric acid, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and titanium dioxide. The 150 mg capsules also contain black iron oxide and red iron oxide. In addition, the black imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "10544-265-04",
"PackageDescription": "4 TABLET in 1 BOTTLE (10544-265-04)",
"NDC11Code": "10544-0265-04",
"ProductNDC": "10544-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metronidazole",
"NonProprietaryName": "Metronidazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100414",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070033",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "METRONIDAZOLE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC],Nitroimidazoles [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Metronidazole is indicated for the treatment of symptomatic trichomoniasis in females and males when the presence of the trichomonad has been confirmed by appropriate laboratory procedures (wet smears and/or cultures).",
"Description": "Metronidazole is an oral synthetic antiprotozoal and antibacterial agent, 1 (β-hydroxyethyl)-2-methyl-5-nitroimidazole, which has the following structural formula. Each tablet for oral administration contains 250 mg or 500 mg of metronidazole. Inactive ingredients include microcrystalline cellulose, crospovidone, colloidal silicon dioxide and hydrogenated vegetable oil."
},
{
"NDCCode": "16590-265-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (16590-265-30)",
"NDC11Code": "16590-0265-30",
"ProductNDC": "16590-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cimetidine",
"NonProprietaryName": "Cimetidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074424",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "CIMETIDINE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cimetidine tablets are indicated in. 1) Short-term treatment of active duodenal ulcer. Most patients heal within 4 weeks and there is rarely reason to use cimetidine at full dosage for longer than 6 to 8 weeks (see DOSAGE AND ADMINISTRATION, Duodenal Ulcer). Concomitant antacids should be given as needed for relief of pain. However, simultaneous administration of oral cimetidine and antacids is not recommended, since antacids have been reported to interfere with the absorption of oral cimetidine. 2) Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of active ulcer. Patients have been maintained on continued treatment with cimetidine 400 mg at bedtime for periods of up to five years. 3) Short-term treatment of active benign gastric ulcer. There is no information concerning usefulness of treatment periods of longer than eight weeks. 4) Erosive gastroesophageal reflux disease (GERD). Erosive esophagitis diagnosed by endoscopy. Treatment is indicated for twelve weeks for healing of lesions and control of symptoms. The use of cimetidine beyond twelve weeks has not been established (see DOSAGE AND ADMINISTRATION, GERD). 5) The treatment of pathological hypersecretory conditions (i.e., Zollinger-Ellison Syndrome, systemic mastocytosis, multiple endocrine adenomas).",
"Description": "Cimetidine is a histamine H2-receptor antagonist. Chemically it is N\"-cyano-N-methyl-N'-[2-[[(5-methyl-1H-imidazol-4-yl)methyl]thio]-ethyl]-guanidine. Its structural formula is. C10H16N6S M.W. 252.34. Cimetidine contains an imidazole ring, and is chemically related to histamine. Cimetidine has a bitter taste and characteristic odor. Cimetidine is soluble in alcohol, slightly soluble in water, very slightly soluble in chloroform and insoluble in ether. Each film-coated tablet, for oral administration, contains 300 mg, 400 mg or 800 mg of cimetidine. In addition, each tablet contains the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "16590-265-56",
"PackageDescription": "56 TABLET, FILM COATED in 1 BOTTLE (16590-265-56)",
"NDC11Code": "16590-0265-56",
"ProductNDC": "16590-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cimetidine",
"NonProprietaryName": "Cimetidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100526",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074424",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "CIMETIDINE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cimetidine tablets are indicated in. 1) Short-term treatment of active duodenal ulcer. Most patients heal within 4 weeks and there is rarely reason to use cimetidine at full dosage for longer than 6 to 8 weeks (see DOSAGE AND ADMINISTRATION, Duodenal Ulcer). Concomitant antacids should be given as needed for relief of pain. However, simultaneous administration of oral cimetidine and antacids is not recommended, since antacids have been reported to interfere with the absorption of oral cimetidine. 2) Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of active ulcer. Patients have been maintained on continued treatment with cimetidine 400 mg at bedtime for periods of up to five years. 3) Short-term treatment of active benign gastric ulcer. There is no information concerning usefulness of treatment periods of longer than eight weeks. 4) Erosive gastroesophageal reflux disease (GERD). Erosive esophagitis diagnosed by endoscopy. Treatment is indicated for twelve weeks for healing of lesions and control of symptoms. The use of cimetidine beyond twelve weeks has not been established (see DOSAGE AND ADMINISTRATION, GERD). 5) The treatment of pathological hypersecretory conditions (i.e., Zollinger-Ellison Syndrome, systemic mastocytosis, multiple endocrine adenomas).",
"Description": "Cimetidine is a histamine H2-receptor antagonist. Chemically it is N\"-cyano-N-methyl-N'-[2-[[(5-methyl-1H-imidazol-4-yl)methyl]thio]-ethyl]-guanidine. Its structural formula is. C10H16N6S M.W. 252.34. Cimetidine contains an imidazole ring, and is chemically related to histamine. Cimetidine has a bitter taste and characteristic odor. Cimetidine is soluble in alcohol, slightly soluble in water, very slightly soluble in chloroform and insoluble in ether. Each film-coated tablet, for oral administration, contains 300 mg, 400 mg or 800 mg of cimetidine. In addition, each tablet contains the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "21130-265-30",
"PackageDescription": "30 LOZENGE in 1 BAG (21130-265-30) ",
"NDC11Code": "21130-0265-30",
"ProductNDC": "21130-265",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Menthol Cough Drop",
"NonProprietaryName": "Menthol",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20140522",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Safeway Inc.",
"SubstanceName": "MENTHOL",
"StrengthNumber": "5.4",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140522",
"SamplePackage": "N",
"IndicationAndUsage": "Uses temporarily relieves. cough as may occur with a cold. occasional minor irritation and sore throat."
},
{
"NDCCode": "21695-265-05",
"PackageDescription": "5 TABLET in 1 BOTTLE (21695-265-05)",
"NDC11Code": "21695-0265-05",
"ProductNDC": "21695-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071322",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate."
},
{
"NDCCode": "21695-265-15",
"PackageDescription": "15 TABLET in 1 BOTTLE (21695-265-15)",
"NDC11Code": "21695-0265-15",
"ProductNDC": "21695-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071322",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate."
},
{
"NDCCode": "21695-265-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (21695-265-30)",
"NDC11Code": "21695-0265-30",
"ProductNDC": "21695-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071322",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate."
},
{
"NDCCode": "21695-265-48",
"PackageDescription": "48 TABLET in 1 BOTTLE (21695-265-48)",
"NDC11Code": "21695-0265-48",
"ProductNDC": "21695-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071322",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate."
},
{
"NDCCode": "21695-265-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (21695-265-60)",
"NDC11Code": "21695-0265-60",
"ProductNDC": "21695-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071322",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate."
},
{
"NDCCode": "21695-265-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (21695-265-90)",
"NDC11Code": "21695-0265-90",
"ProductNDC": "21695-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071322",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate."
},
{
"NDCCode": "27241-265-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (27241-265-01) ",
"NDC11Code": "27241-0265-01",
"ProductNDC": "27241-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Haloperidol",
"NonProprietaryName": "Haloperidol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218210",
"LabelerName": "Ajanta Pharma USA Inc.",
"SubstanceName": "HALOPERIDOL",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Typical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260914",
"SamplePackage": "N",
"IndicationAndUsage": "Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.",
"Description": "Haloperidol, USP is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn), sodium lauryl sulfate and sodium starch glycolate. In addition, the 0.5 mg and 1 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake, 2 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake and 5 mg, 10 mg and 20 mg tablets contain FD&C Blue no. 2 Aluminum Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "31722-265-30",
"PackageDescription": "1 BOTTLE in 1 CARTON (31722-265-30) / 30 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "31722-0265-30",
"ProductNDC": "31722-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erlotinib",
"NonProprietaryName": "Erlotinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209267",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "ERLOTINIB HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240524",
"SamplePackage": "N",
"IndicationAndUsage": "Erlotinib tablets are a kinase inhibitor indicated for: The treatment of patients with metastatic non-small cell lung cancer (NSCLC) whose tumors have epidermal growth factor receptor (EGFR) exon 19 deletions or exon 21 (L858R) substitution mutations as detected by an FDA-approved test receiving first-line, maintenance, or second or greater line treatment after progression following at least one prior chemotherapy regimen. ( 1.1) First-line treatment of patients with locally advanced, unresectable or metastatic pancreatic cancer, in combination with gemcitabine. ( 1.2) Limitations of Use: Safety and efficacy of erlotinib tablets have not been established in patients with NSCLC whose tumors have other EGFR mutations. ( 1.1) Erlotinib tablets are not recommended for use in combination with platinum-based chemotherapy. ( 1.1).",
"Description": "Erlotinib, a kinase inhibitor, is a quinazolinamine with the chemical name N-(3-Ethynylphenyl)-6,7-bis(2-methoxyethoxy)-4-quinazolinamine Hydrochloride. Erlotinib contains erlotinib as the hydrochloride salt that has the following structural formula:. Erlotinib hydrochloride has the molecular formula C 22H 23N 3O 4.HCl and a molecular weight of 429.90. The molecule has a pk aof 5.6. Erlotinib hydrochloride is a white to an off-white crystalline powder. Erlotinib hydrochloride is very slightly soluble in methanol. Erlotinib tablets for oral administration are available in three dosage strengths containing erlotinib hydrochloride (27.3 mg, 109.3 mg and 163.9 mg) equivalent to 25 mg, 100 mg and 150 mg erlotinib and the following inactive ingredients: hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "33342-265-07",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (33342-265-07) ",
"NDC11Code": "33342-0265-07",
"ProductNDC": "33342-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tadalafil",
"NonProprietaryName": "Tadalafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20191008",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207244",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "TADALAFIL",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191008",
"SamplePackage": "N",
"IndicationAndUsage": "Tadalafil is a phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of: : 1 erectile dysfunction (ED) (1.1), 2 the signs and symptoms of benign prostatic hyperplasia (BPH) (1.2), 3 ED and the signs and symptoms of BPH (ED/BPH) (1.3).",
"Description": "Tadalafil USP is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil USP has the molecular formula C22H19N3O4 representing a molecular weight of 389.41. The structural formula is. The chemical designation is pyrazino[1′,2′:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP is available as almond-shaped tablets for oral administration. Each tablet contains 2.5 mg, 5 mg, 10 mg, or 20 mg of tadalafil USP and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, povidone, hypromellose, iron oxide yellow, lactose monohydrate, sodium citrate dihydrate, sodium stearyl fumarate, microcrystalline cellulose, sodium lauryl sulfate, talc, titanium dioxide, and triacetin."
},
{
"NDCCode": "33342-265-44",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (33342-265-44) ",
"NDC11Code": "33342-0265-44",
"ProductNDC": "33342-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tadalafil",
"NonProprietaryName": "Tadalafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20191008",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207244",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "TADALAFIL",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250417",
"SamplePackage": "N",
"IndicationAndUsage": "Tadalafil is a phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of: : 1 erectile dysfunction (ED) (1.1), 2 the signs and symptoms of benign prostatic hyperplasia (BPH) (1.2), 3 ED and the signs and symptoms of BPH (ED/BPH) (1.3).",
"Description": "Tadalafil USP is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil USP has the molecular formula C22H19N3O4 representing a molecular weight of 389.41. The structural formula is. The chemical designation is pyrazino[1′,2′:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP is available as almond-shaped tablets for oral administration. Each tablet contains 2.5 mg, 5 mg, 10 mg, or 20 mg of tadalafil USP and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, povidone, hypromellose, iron oxide yellow, lactose monohydrate, sodium citrate dihydrate, sodium stearyl fumarate, microcrystalline cellulose, sodium lauryl sulfate, talc, titanium dioxide, and triacetin."
},
{
"NDCCode": "36000-265-05",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 CARTON (36000-265-05) / 5 mL in 1 VIAL, SINGLE-DOSE (36000-265-01) ",
"NDC11Code": "36000-0265-05",
"ProductNDC": "36000-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260806",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208458",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260806",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam injection is indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam injection is indicated for adjunctive therapy for the treatment of:. oMyoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2) . oPrimary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3). Levetiracetam injection is for intravenous use only as an alternative for patients when oral administration is temporarily not feasible (1.4).",
"Description": "Levetiracetam injection, USP is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection, USP contains 100 mg of levetiracetam per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.0 to 6.0 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection, USP must be diluted prior to intravenous infusion [see Dosage and Administration (2.6)]."
},
{
"NDCCode": "36000-265-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (36000-265-10) / 5 mL in 1 VIAL, SINGLE-DOSE (36000-265-01) ",
"NDC11Code": "36000-0265-10",
"ProductNDC": "36000-265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260806",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208458",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260806",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam injection is indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam injection is indicated for adjunctive therapy for the treatment of:. oMyoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2) . oPrimary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3). Levetiracetam injection is for intravenous use only as an alternative for patients when oral administration is temporarily not feasible (1.4).",
"Description": "Levetiracetam injection, USP is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection, USP contains 100 mg of levetiracetam per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.0 to 6.0 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection, USP must be diluted prior to intravenous infusion [see Dosage and Administration (2.6)]."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0265-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0265-4)</PackageDescription>
<NDC11Code>49288-0265-04</NDC11Code>
<ProductNDC>49288-0265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>White Hickory</ProprietaryName>
<NonProprietaryName>White Hickory</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CARYA ALBA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0265-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0265-1)</PackageDescription>
<NDC11Code>49288-0265-01</NDC11Code>
<ProductNDC>49288-0265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>White Hickory</ProprietaryName>
<NonProprietaryName>White Hickory</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CARYA ALBA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0265-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0265-2)</PackageDescription>
<NDC11Code>49288-0265-02</NDC11Code>
<ProductNDC>49288-0265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>White Hickory</ProprietaryName>
<NonProprietaryName>White Hickory</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CARYA ALBA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0265-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0265-3)</PackageDescription>
<NDC11Code>49288-0265-03</NDC11Code>
<ProductNDC>49288-0265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>White Hickory</ProprietaryName>
<NonProprietaryName>White Hickory</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CARYA ALBA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0265-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0265-5)</PackageDescription>
<NDC11Code>49288-0265-05</NDC11Code>
<ProductNDC>49288-0265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>White Hickory</ProprietaryName>
<NonProprietaryName>White Hickory</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>CARYA ALBA POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>13630-0265-4</NDCCode>
<PackageDescription>198 mL in 1 CAN (13630-0265-4) </PackageDescription>
<NDC11Code>13630-0265-04</NDC11Code>
<ProductNDC>13630-0265</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Australian Gold</ProprietaryName>
<ProprietaryNameSuffix>Instant Bronzer Broad Spectrum Spf 30</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191211</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Prime Packaging, Inc.</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>25.8; 64.5; 43; 43</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-05-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>: 1 helps prevent sunburn, 2 if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>15631-0265-4</NDCCode>
<PackageDescription>2500 PELLET in 1 PACKAGE (15631-0265-4) </PackageDescription>
<NDC11Code>15631-0265-04</NDC11Code>
<ProductNDC>15631-0265</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lamium Album</ProprietaryName>
<NonProprietaryName>Lamium Album</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150905</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>LAMIUM ALBUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37662-0265-4</NDCCode>
<PackageDescription>10000 PELLET in 1 BOTTLE, GLASS (37662-0265-4) </PackageDescription>
<NDC11Code>37662-0265-04</NDC11Code>
<ProductNDC>37662-0265</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Chloroformum</ProprietaryName>
<NonProprietaryName>Chloroformum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220601</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>CHLOROFORM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58443-0265-4</NDCCode>
<PackageDescription>177 mL in 1 TUBE (58443-0265-4) </PackageDescription>
<NDC11Code>58443-0265-04</NDC11Code>
<ProductNDC>58443-0265</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Australian Gold</ProprietaryName>
<ProprietaryNameSuffix>Botanicals Sunscreen 70 Minerals</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181029</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Prime Enterprises Inc.</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>43.604; 49.55</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-09-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181029</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-0265-4</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (71335-0265-4) </PackageDescription>
<NDC11Code>71335-0265-04</NDC11Code>
<ProductNDC>71335-0265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077471</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100621</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone hydrochloride tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve hydromorphone hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0054-0265-25</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0054-0265-25) </PackageDescription>
<NDC11Code>00054-0265-25</NDC11Code>
<ProductNDC>0054-0265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090729</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074597</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.2)], reserve Hydromorphone Hydrochloride Oral Solution and Hydromorphone Hydrochloride Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Hydromorphone hydrochloride, a hydrogenated ketone of morphine, is an opioid agonist. Hydromorphone hydrochloride, USP is a white to off-white powder. It is soluble in water and sparingly soluble in alcohol. The chemical name of hydromorphone hydrochloride is 4,5α-Epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The structural formula is. C17H19NO3 ●HCl M.W. 321.80. Each Hydromorphone Hydrochloride Tablet, USP for oral administration, contains 4 mg or 8 mg hydromorphone hydrochloride, USP. In addition, the tablets include lactose anhydrous and magnesium stearate. Hydromorphone Hydrochloride Tablets, USP may contain traces of sodium metabisulfite. Each 5 mL (1 teaspoonful) of Hydromorphone Hydrochloride Oral Solution, USP contains 5 mg of hydromorphone hydrochloride, USP. In addition, other ingredients include FD&C Red No. 40, methyl paraben, propylene glycol, propylparaben, purified water, raspberry blend, saccharin sodium and sorbitol solution. Hydromorphone Hydrochloride Oral Solution, USP may contain traces of sodium metabisulfite.</Description>
</NDC>
<NDC>
<NDCCode>0168-0265-15</NDCCode>
<PackageDescription>15 g in 1 TUBE (0168-0265-15) </PackageDescription>
<NDC11Code>00168-0265-15</NDC11Code>
<ProductNDC>0168-0265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Dipropionate</ProprietaryName>
<NonProprietaryName>Betamethasone Dipropionate</NonProprietaryName>
<DosageFormName>CREAM, AUGMENTED</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20031209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076215</ApplicationNumber>
<LabelerName>E. Fougera & Co. a division of Fougera Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BETAMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20031209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Betamethasone Dipropionate Cream USP, 0.05% (Augmented) is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.</IndicationAndUsage>
<Description>Betamethasone Dipropionate Cream USP 0.05%, (Augmented), contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use in a white to off-white cream base. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the molecular formula C28H37FO7, a molecular weight of 504.6, and the following structural formula. Betamethasone dipropionate is a white to creamy white, odorless crystalline powder, insoluble in water. Each gram of Betamethasone Dipropionate Cream USP, 0.05% (Augmented), contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in a white to off-white cream base of purified water, chlorocresol, white petrolatum, white wax (beeswax), cyclomethicone, sorbitol solution, glyceryl monooleate, propylene glycol, ceteareth-30, carbomer 980, and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0168-0265-50</NDCCode>
<PackageDescription>50 g in 1 TUBE (0168-0265-50) </PackageDescription>
<NDC11Code>00168-0265-50</NDC11Code>
<ProductNDC>0168-0265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Dipropionate</ProprietaryName>
<NonProprietaryName>Betamethasone Dipropionate</NonProprietaryName>
<DosageFormName>CREAM, AUGMENTED</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20031209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076215</ApplicationNumber>
<LabelerName>E. Fougera & Co. a division of Fougera Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BETAMETHASONE DIPROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20031209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Betamethasone Dipropionate Cream USP, 0.05% (Augmented) is a corticosteroid indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 13 years of age or older.</IndicationAndUsage>
<Description>Betamethasone Dipropionate Cream USP 0.05%, (Augmented), contains betamethasone dipropionate USP, a synthetic adrenocorticosteroid, for topical use in a white to off-white cream base. Betamethasone, an analog of prednisolone, has a high degree of corticosteroid activity and a slight degree of mineralocorticoid activity. Betamethasone dipropionate is the 17,21-dipropionate ester of betamethasone. Chemically, betamethasone dipropionate is 9-fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17,21-dipropionate, with the molecular formula C28H37FO7, a molecular weight of 504.6, and the following structural formula. Betamethasone dipropionate is a white to creamy white, odorless crystalline powder, insoluble in water. Each gram of Betamethasone Dipropionate Cream USP, 0.05% (Augmented), contains: 0.643 mg betamethasone dipropionate, USP (equivalent to 0.5 mg betamethasone) in a white to off-white cream base of purified water, chlorocresol, white petrolatum, white wax (beeswax), cyclomethicone, sorbitol solution, glyceryl monooleate, propylene glycol, ceteareth-30, carbomer 980, and sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0378-0265-91</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE, PLASTIC (0378-0265-91) </PackageDescription>
<NDC11Code>00378-0265-91</NDC11Code>
<ProductNDC>0378-0265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dabigatran Etexilate</ProprietaryName>
<NonProprietaryName>Dabigatran Etexilate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250225</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208067</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DABIGATRAN ETEXILATE MESYLATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250225</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dabigatran etexilate capsules are a direct thrombin inhibitor indicated: : 1 To reduce the risk of stroke and systemic embolism in adult patients with non-valvular atrial fibrillation (1.1) , 2 For the treatment of deep venous thrombosis (DVT) and pulmonary embolism (PE) in adult patients who have been treated with a parenteral anticoagulant for 5-10 days (1.2) , 3 To reduce the risk of recurrence of DVT and PE in adult patients who have been previously treated (1.3), 4 For the prophylaxis of DVT and PE in adult patients who have undergone hip replacement surgery (1.4), 5 For the treatment of venous thromboembolic events (VTE) in pediatric patients 8 to less than 18 years of age who have been treated with a parenteral anticoagulant for at least 5 days (1.5), 6 To reduce the risk of recurrence of VTE in pediatric patients 8 to less than 18 years of age who have been previously treated (1.6).</IndicationAndUsage>
<Description>The chemical name for dabigatran etexilate mesylate, a direct thrombin inhibitor, is Ethyl 3-{[(2-{[(4-{[(hexyloxy)carbonyl]carbamimidoyl}phenyl)amino]methyl}-1-methyl-1H-benzimidazol-5-yl)carbonyl](pyridin-2-yl)amino}propanoate, monomethanesulfonate. The empirical formula is C34H41N7O5CH4O3S and the molecular weight is 723.86 (mesylate salt), 627.75 (free base). The structural formula is. Dabigatran etexilate mesylate is a white to yellow powder. A saturated solution in pure water has a solubility of 1.8 mg/mL. It is freely soluble in methanol, slightly soluble in ethanol, and sparingly soluble in isopropanol. Dabigatran etexilate capsules are supplied in 75 mg and 150 mg strengths for oral administration. Each capsule contains dabigatran etexilate mesylate as the active ingredient: 150 mg dabigatran etexilate (equivalent to 172.95 mg dabigatran etexilate mesylate) or 75 mg dabigatran etexilate (equivalent to 86.48 mg dabigatran etexilate mesylate) along with the following inactive ingredients: colloidal silicon dioxide, crospovidone, fumaric acid, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and titanium dioxide. The 150 mg capsules also contain black iron oxide and red iron oxide. In addition, the black imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>10544-265-04</NDCCode>
<PackageDescription>4 TABLET in 1 BOTTLE (10544-265-04)</PackageDescription>
<NDC11Code>10544-0265-04</NDC11Code>
<ProductNDC>10544-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metronidazole</ProprietaryName>
<NonProprietaryName>Metronidazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100414</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070033</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>METRONIDAZOLE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC],Nitroimidazoles [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Metronidazole is indicated for the treatment of symptomatic trichomoniasis in females and males when the presence of the trichomonad has been confirmed by appropriate laboratory procedures (wet smears and/or cultures).</IndicationAndUsage>
<Description>Metronidazole is an oral synthetic antiprotozoal and antibacterial agent, 1 (β-hydroxyethyl)-2-methyl-5-nitroimidazole, which has the following structural formula. Each tablet for oral administration contains 250 mg or 500 mg of metronidazole. Inactive ingredients include microcrystalline cellulose, crospovidone, colloidal silicon dioxide and hydrogenated vegetable oil.</Description>
</NDC>
<NDC>
<NDCCode>16590-265-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16590-265-30)</PackageDescription>
<NDC11Code>16590-0265-30</NDC11Code>
<ProductNDC>16590-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cimetidine</ProprietaryName>
<NonProprietaryName>Cimetidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074424</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>CIMETIDINE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cimetidine tablets are indicated in. 1) Short-term treatment of active duodenal ulcer. Most patients heal within 4 weeks and there is rarely reason to use cimetidine at full dosage for longer than 6 to 8 weeks (see DOSAGE AND ADMINISTRATION, Duodenal Ulcer). Concomitant antacids should be given as needed for relief of pain. However, simultaneous administration of oral cimetidine and antacids is not recommended, since antacids have been reported to interfere with the absorption of oral cimetidine. 2) Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of active ulcer. Patients have been maintained on continued treatment with cimetidine 400 mg at bedtime for periods of up to five years. 3) Short-term treatment of active benign gastric ulcer. There is no information concerning usefulness of treatment periods of longer than eight weeks. 4) Erosive gastroesophageal reflux disease (GERD). Erosive esophagitis diagnosed by endoscopy. Treatment is indicated for twelve weeks for healing of lesions and control of symptoms. The use of cimetidine beyond twelve weeks has not been established (see DOSAGE AND ADMINISTRATION, GERD). 5) The treatment of pathological hypersecretory conditions (i.e., Zollinger-Ellison Syndrome, systemic mastocytosis, multiple endocrine adenomas).</IndicationAndUsage>
<Description>Cimetidine is a histamine H2-receptor antagonist. Chemically it is N"-cyano-N-methyl-N'-[2-[[(5-methyl-1H-imidazol-4-yl)methyl]thio]-ethyl]-guanidine. Its structural formula is. C10H16N6S M.W. 252.34. Cimetidine contains an imidazole ring, and is chemically related to histamine. Cimetidine has a bitter taste and characteristic odor. Cimetidine is soluble in alcohol, slightly soluble in water, very slightly soluble in chloroform and insoluble in ether. Each film-coated tablet, for oral administration, contains 300 mg, 400 mg or 800 mg of cimetidine. In addition, each tablet contains the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>16590-265-56</NDCCode>
<PackageDescription>56 TABLET, FILM COATED in 1 BOTTLE (16590-265-56)</PackageDescription>
<NDC11Code>16590-0265-56</NDC11Code>
<ProductNDC>16590-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cimetidine</ProprietaryName>
<NonProprietaryName>Cimetidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100526</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074424</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>CIMETIDINE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cimetidine tablets are indicated in. 1) Short-term treatment of active duodenal ulcer. Most patients heal within 4 weeks and there is rarely reason to use cimetidine at full dosage for longer than 6 to 8 weeks (see DOSAGE AND ADMINISTRATION, Duodenal Ulcer). Concomitant antacids should be given as needed for relief of pain. However, simultaneous administration of oral cimetidine and antacids is not recommended, since antacids have been reported to interfere with the absorption of oral cimetidine. 2) Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of active ulcer. Patients have been maintained on continued treatment with cimetidine 400 mg at bedtime for periods of up to five years. 3) Short-term treatment of active benign gastric ulcer. There is no information concerning usefulness of treatment periods of longer than eight weeks. 4) Erosive gastroesophageal reflux disease (GERD). Erosive esophagitis diagnosed by endoscopy. Treatment is indicated for twelve weeks for healing of lesions and control of symptoms. The use of cimetidine beyond twelve weeks has not been established (see DOSAGE AND ADMINISTRATION, GERD). 5) The treatment of pathological hypersecretory conditions (i.e., Zollinger-Ellison Syndrome, systemic mastocytosis, multiple endocrine adenomas).</IndicationAndUsage>
<Description>Cimetidine is a histamine H2-receptor antagonist. Chemically it is N"-cyano-N-methyl-N'-[2-[[(5-methyl-1H-imidazol-4-yl)methyl]thio]-ethyl]-guanidine. Its structural formula is. C10H16N6S M.W. 252.34. Cimetidine contains an imidazole ring, and is chemically related to histamine. Cimetidine has a bitter taste and characteristic odor. Cimetidine is soluble in alcohol, slightly soluble in water, very slightly soluble in chloroform and insoluble in ether. Each film-coated tablet, for oral administration, contains 300 mg, 400 mg or 800 mg of cimetidine. In addition, each tablet contains the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, povidone, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>21130-265-30</NDCCode>
<PackageDescription>30 LOZENGE in 1 BAG (21130-265-30) </PackageDescription>
<NDC11Code>21130-0265-30</NDC11Code>
<ProductNDC>21130-265</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Menthol Cough Drop</ProprietaryName>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140522</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Safeway Inc.</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>5.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses temporarily relieves. cough as may occur with a cold. occasional minor irritation and sore throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>21695-265-05</NDCCode>
<PackageDescription>5 TABLET in 1 BOTTLE (21695-265-05)</PackageDescription>
<NDC11Code>21695-0265-05</NDC11Code>
<ProductNDC>21695-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071322</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>21695-265-15</NDCCode>
<PackageDescription>15 TABLET in 1 BOTTLE (21695-265-15)</PackageDescription>
<NDC11Code>21695-0265-15</NDC11Code>
<ProductNDC>21695-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071322</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>21695-265-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (21695-265-30)</PackageDescription>
<NDC11Code>21695-0265-30</NDC11Code>
<ProductNDC>21695-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071322</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>21695-265-48</NDCCode>
<PackageDescription>48 TABLET in 1 BOTTLE (21695-265-48)</PackageDescription>
<NDC11Code>21695-0265-48</NDC11Code>
<ProductNDC>21695-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071322</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>21695-265-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (21695-265-60)</PackageDescription>
<NDC11Code>21695-0265-60</NDC11Code>
<ProductNDC>21695-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071322</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>21695-265-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (21695-265-90)</PackageDescription>
<NDC11Code>21695-0265-90</NDC11Code>
<ProductNDC>21695-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071322</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, and is insoluble in water. Its structural formula is. C16H13ClN2O M.W. 284.75. Diazepam is available as 2 mg, 5 mg, and 10 mg tablets for oral administration and contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide; colorants: 5 mg only (D&C Yellow No. 10 and FD&C Yellow No. 6); 10 mg only (FD&C Blue No. 1); magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>27241-265-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (27241-265-01) </PackageDescription>
<NDC11Code>27241-0265-01</NDC11Code>
<ProductNDC>27241-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Haloperidol</ProprietaryName>
<NonProprietaryName>Haloperidol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218210</ApplicationNumber>
<LabelerName>Ajanta Pharma USA Inc.</LabelerName>
<SubstanceName>HALOPERIDOL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
<Description>Haloperidol, USP is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn), sodium lauryl sulfate and sodium starch glycolate. In addition, the 0.5 mg and 1 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake, 2 mg, 5 mg and 10 mg tablets contain D&C Yellow No. 10 Aluminum Lake and 5 mg, 10 mg and 20 mg tablets contain FD&C Blue no. 2 Aluminum Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>31722-265-30</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (31722-265-30) / 30 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>31722-0265-30</NDC11Code>
<ProductNDC>31722-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erlotinib</ProprietaryName>
<NonProprietaryName>Erlotinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209267</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ERLOTINIB HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Erlotinib tablets are a kinase inhibitor indicated for: The treatment of patients with metastatic non-small cell lung cancer (NSCLC) whose tumors have epidermal growth factor receptor (EGFR) exon 19 deletions or exon 21 (L858R) substitution mutations as detected by an FDA-approved test receiving first-line, maintenance, or second or greater line treatment after progression following at least one prior chemotherapy regimen. ( 1.1) First-line treatment of patients with locally advanced, unresectable or metastatic pancreatic cancer, in combination with gemcitabine. ( 1.2) Limitations of Use: Safety and efficacy of erlotinib tablets have not been established in patients with NSCLC whose tumors have other EGFR mutations. ( 1.1) Erlotinib tablets are not recommended for use in combination with platinum-based chemotherapy. ( 1.1).</IndicationAndUsage>
<Description>Erlotinib, a kinase inhibitor, is a quinazolinamine with the chemical name N-(3-Ethynylphenyl)-6,7-bis(2-methoxyethoxy)-4-quinazolinamine Hydrochloride. Erlotinib contains erlotinib as the hydrochloride salt that has the following structural formula:. Erlotinib hydrochloride has the molecular formula C 22H 23N 3O 4.HCl and a molecular weight of 429.90. The molecule has a pk aof 5.6. Erlotinib hydrochloride is a white to an off-white crystalline powder. Erlotinib hydrochloride is very slightly soluble in methanol. Erlotinib tablets for oral administration are available in three dosage strengths containing erlotinib hydrochloride (27.3 mg, 109.3 mg and 163.9 mg) equivalent to 25 mg, 100 mg and 150 mg erlotinib and the following inactive ingredients: hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>33342-265-07</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (33342-265-07) </PackageDescription>
<NDC11Code>33342-0265-07</NDC11Code>
<ProductNDC>33342-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tadalafil</ProprietaryName>
<NonProprietaryName>Tadalafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191008</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207244</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>TADALAFIL</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tadalafil is a phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of: : 1 erectile dysfunction (ED) (1.1), 2 the signs and symptoms of benign prostatic hyperplasia (BPH) (1.2), 3 ED and the signs and symptoms of BPH (ED/BPH) (1.3).</IndicationAndUsage>
<Description>Tadalafil USP is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil USP has the molecular formula C22H19N3O4 representing a molecular weight of 389.41. The structural formula is. The chemical designation is pyrazino[1′,2′:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP is available as almond-shaped tablets for oral administration. Each tablet contains 2.5 mg, 5 mg, 10 mg, or 20 mg of tadalafil USP and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, povidone, hypromellose, iron oxide yellow, lactose monohydrate, sodium citrate dihydrate, sodium stearyl fumarate, microcrystalline cellulose, sodium lauryl sulfate, talc, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>33342-265-44</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (33342-265-44) </PackageDescription>
<NDC11Code>33342-0265-44</NDC11Code>
<ProductNDC>33342-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tadalafil</ProprietaryName>
<NonProprietaryName>Tadalafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191008</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207244</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>TADALAFIL</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tadalafil is a phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of: : 1 erectile dysfunction (ED) (1.1), 2 the signs and symptoms of benign prostatic hyperplasia (BPH) (1.2), 3 ED and the signs and symptoms of BPH (ED/BPH) (1.3).</IndicationAndUsage>
<Description>Tadalafil USP is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil USP has the molecular formula C22H19N3O4 representing a molecular weight of 389.41. The structural formula is. The chemical designation is pyrazino[1′,2′:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP is available as almond-shaped tablets for oral administration. Each tablet contains 2.5 mg, 5 mg, 10 mg, or 20 mg of tadalafil USP and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, povidone, hypromellose, iron oxide yellow, lactose monohydrate, sodium citrate dihydrate, sodium stearyl fumarate, microcrystalline cellulose, sodium lauryl sulfate, talc, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>36000-265-05</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 CARTON (36000-265-05) / 5 mL in 1 VIAL, SINGLE-DOSE (36000-265-01) </PackageDescription>
<NDC11Code>36000-0265-05</NDC11Code>
<ProductNDC>36000-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260806</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208458</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260806</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam injection is indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam injection is indicated for adjunctive therapy for the treatment of:. oMyoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2) . oPrimary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3). Levetiracetam injection is for intravenous use only as an alternative for patients when oral administration is temporarily not feasible (1.4).</IndicationAndUsage>
<Description>Levetiracetam injection, USP is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection, USP contains 100 mg of levetiracetam per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.0 to 6.0 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection, USP must be diluted prior to intravenous infusion [see Dosage and Administration (2.6)].</Description>
</NDC>
<NDC>
<NDCCode>36000-265-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (36000-265-10) / 5 mL in 1 VIAL, SINGLE-DOSE (36000-265-01) </PackageDescription>
<NDC11Code>36000-0265-10</NDC11Code>
<ProductNDC>36000-265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260806</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208458</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260806</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam injection is indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam injection is indicated for adjunctive therapy for the treatment of:. oMyoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2) . oPrimary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3). Levetiracetam injection is for intravenous use only as an alternative for patients when oral administration is temporarily not feasible (1.4).</IndicationAndUsage>
<Description>Levetiracetam injection, USP is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam, USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection, USP contains 100 mg of levetiracetam per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.0 to 6.0 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection, USP must be diluted prior to intravenous infusion [see Dosage and Administration (2.6)].</Description>
</NDC>
</NDCList>