RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>49288-0266-4</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0266-4)</PackageDescription>
    <NDC11Code>49288-0266-04</NDC11Code>
    <ProductNDC>49288-0266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hickory/pecan Mixture</ProprietaryName>
    <NonProprietaryName>Hickory/pecan Mixture</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19960712</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>CARYA ILLINOINENSIS POLLEN; CARYA ALBA POLLEN</SubstanceName>
    <StrengthNumber>.025; .025</StrengthNumber>
    <StrengthUnit>g/mL; g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>10096-0266-4</NDCCode>
    <PackageDescription>1 JAR in 1 CARTON (10096-0266-4)  &gt; 15 g in 1 JAR (10096-0266-3)</PackageDescription>
    <NDC11Code>10096-0266-04</NDC11Code>
    <ProductNDC>10096-0266</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Anew</ProprietaryName>
    <ProprietaryNameSuffix>Ultimate 7s Day</ProprietaryNameSuffix>
    <NonProprietaryName>Homosalate, Octinoxate, Oxybenzone, Avobenzone</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20111220</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>Avon Products, Inc.</LabelerName>
    <SubstanceName>HOMOSALATE; OCTINOXATE; OXYBENZONE; AVOBENZONE</SubstanceName>
    <StrengthNumber>4; 2.5; 2; 1.425</StrengthNumber>
    <StrengthUnit>g/50g; g/50g; g/50g; g/50g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Uses helps prevent sunburn.  if used as directed with other sun protection measures (see Directions), decreases the risk of cancer and early skin aging caused by the sun.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>15631-0266-4</NDCCode>
    <PackageDescription>2500 PELLET in 1 PACKAGE (15631-0266-4) </PackageDescription>
    <NDC11Code>15631-0266-04</NDC11Code>
    <ProductNDC>15631-0266</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Lapis Albus</ProprietaryName>
    <NonProprietaryName>Lapis Albus</NonProprietaryName>
    <DosageFormName>PELLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150905</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
    <SubstanceName>CALCIUM HEXAFLUOROSILICATE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>[hp_X]/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>58443-0266-4</NDCCode>
    <PackageDescription>237 mL in 1 BOTTLE (58443-0266-4) </PackageDescription>
    <NDC11Code>58443-0266-04</NDC11Code>
    <ProductNDC>58443-0266</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Meijer</ProprietaryName>
    <ProprietaryNameSuffix>Spf 4 Dark Tanning Oil</ProprietaryNameSuffix>
    <NonProprietaryName>Avobenzone, Octocrylene</NonProprietaryName>
    <DosageFormName>OIL</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20190204</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>Prime Enterprises Inc.</LabelerName>
    <SubstanceName>AVOBENZONE; OCTOCRYLENE</SubstanceName>
    <StrengthNumber>9.03; 9.03</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-05-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190204</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>49288-0266-1</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0266-1)</PackageDescription>
    <NDC11Code>49288-0266-01</NDC11Code>
    <ProductNDC>49288-0266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hickory/pecan Mixture</ProprietaryName>
    <NonProprietaryName>Hickory/pecan Mixture</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19960712</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>CARYA ILLINOINENSIS POLLEN; CARYA ALBA POLLEN</SubstanceName>
    <StrengthNumber>.025; .025</StrengthNumber>
    <StrengthUnit>g/mL; g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0266-2</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0266-2)</PackageDescription>
    <NDC11Code>49288-0266-02</NDC11Code>
    <ProductNDC>49288-0266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hickory/pecan Mixture</ProprietaryName>
    <NonProprietaryName>Hickory/pecan Mixture</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19960712</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>CARYA ILLINOINENSIS POLLEN; CARYA ALBA POLLEN</SubstanceName>
    <StrengthNumber>.025; .025</StrengthNumber>
    <StrengthUnit>g/mL; g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0266-3</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0266-3)</PackageDescription>
    <NDC11Code>49288-0266-03</NDC11Code>
    <ProductNDC>49288-0266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hickory/pecan Mixture</ProprietaryName>
    <NonProprietaryName>Hickory/pecan Mixture</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19960712</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>CARYA ILLINOINENSIS POLLEN; CARYA ALBA POLLEN</SubstanceName>
    <StrengthNumber>.025; .025</StrengthNumber>
    <StrengthUnit>g/mL; g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0266-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0266-5)</PackageDescription>
    <NDC11Code>49288-0266-05</NDC11Code>
    <ProductNDC>49288-0266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hickory/pecan Mixture</ProprietaryName>
    <NonProprietaryName>Hickory/pecan Mixture</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19960712</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>CARYA ILLINOINENSIS POLLEN; CARYA ALBA POLLEN</SubstanceName>
    <StrengthNumber>.025; .025</StrengthNumber>
    <StrengthUnit>g/mL; g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>0378-0266-91</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE, PLASTIC (0378-0266-91) </PackageDescription>
    <NDC11Code>00378-0266-91</NDC11Code>
    <ProductNDC>0378-0266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dabigatran Etexilate</ProprietaryName>
    <NonProprietaryName>Dabigatran Etexilate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250225</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208067</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DABIGATRAN ETEXILATE MESYLATE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Direct Thrombin Inhibitor [EPC], Thrombin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250225</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dabigatran etexilate capsules are a direct thrombin inhibitor indicated: : 1 To reduce the risk of stroke and systemic embolism in adult patients with non-valvular atrial fibrillation (1.1) , 2 For the treatment of deep venous thrombosis (DVT) and pulmonary embolism (PE) in adult patients who have been treated with a parenteral anticoagulant for 5-10 days (1.2) , 3 To reduce the risk of recurrence of DVT and PE in adult patients who have been previously treated (1.3), 4 For the prophylaxis of DVT and PE in adult patients who have undergone hip replacement surgery (1.4), 5 For the treatment of venous thromboembolic events (VTE) in pediatric patients 8 to less than 18 years of age who have been treated with a parenteral anticoagulant for at least 5 days (1.5), 6 To reduce the risk of recurrence of VTE in pediatric patients 8 to less than 18 years of age who have been previously treated (1.6).</IndicationAndUsage>
    <Description>The chemical name for dabigatran etexilate mesylate, a direct thrombin inhibitor, is Ethyl 3-{[(2-{[(4-{[(hexyloxy)carbonyl]carbamimidoyl}phenyl)amino]methyl}-1-methyl-1H-benzimidazol-5-yl)carbonyl](pyridin-2-yl)amino}propanoate, monomethanesulfonate. The empirical formula is C34H41N7O5CH4O3S and the molecular weight is 723.86 (mesylate salt), 627.75 (free base). The structural formula is. Dabigatran etexilate mesylate is a white to yellow powder. A saturated solution in pure water has a solubility of 1.8 mg/mL. It is freely soluble in methanol, slightly soluble in ethanol, and sparingly soluble in isopropanol. Dabigatran etexilate capsules are supplied in 75 mg and 150 mg strengths for oral administration. Each capsule contains dabigatran etexilate mesylate as the active ingredient: 150 mg dabigatran etexilate (equivalent to 172.95 mg dabigatran etexilate mesylate) or 75 mg dabigatran etexilate (equivalent to 86.48 mg dabigatran etexilate mesylate) along with the following inactive ingredients: colloidal silicon dioxide, crospovidone, fumaric acid, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and titanium dioxide. The 150 mg capsules also contain black iron oxide and red iron oxide. In addition, the black imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>10096-0266-2</NDCCode>
    <PackageDescription>1 JAR in 1 CARTON (10096-0266-2)  &gt; 50 g in 1 JAR (10096-0266-1)</PackageDescription>
    <NDC11Code>10096-0266-02</NDC11Code>
    <ProductNDC>10096-0266</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Anew</ProprietaryName>
    <ProprietaryNameSuffix>Ultimate 7s Day</ProprietaryNameSuffix>
    <NonProprietaryName>Homosalate, Octinoxate, Oxybenzone, Avobenzone</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20111220</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>Avon Products, Inc.</LabelerName>
    <SubstanceName>HOMOSALATE; OCTINOXATE; OXYBENZONE; AVOBENZONE</SubstanceName>
    <StrengthNumber>4; 2.5; 2; 1.425</StrengthNumber>
    <StrengthUnit>g/50g; g/50g; g/50g; g/50g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Uses helps prevent sunburn.  if used as directed with other sun protection measures (see Directions), decreases the risk of cancer and early skin aging caused by the sun.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>10096-0266-5</NDCCode>
    <PackageDescription>1.1 g in 1 PACKET (10096-0266-5)</PackageDescription>
    <NDC11Code>10096-0266-05</NDC11Code>
    <ProductNDC>10096-0266</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Anew</ProprietaryName>
    <ProprietaryNameSuffix>Ultimate 7s Day</ProprietaryNameSuffix>
    <NonProprietaryName>Homosalate, Octinoxate, Oxybenzone, Avobenzone</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20111220</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>Avon Products, Inc.</LabelerName>
    <SubstanceName>HOMOSALATE; OCTINOXATE; OXYBENZONE; AVOBENZONE</SubstanceName>
    <StrengthNumber>4; 2.5; 2; 1.425</StrengthNumber>
    <StrengthUnit>g/50g; g/50g; g/50g; g/50g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Uses helps prevent sunburn.  if used as directed with other sun protection measures (see Directions), decreases the risk of cancer and early skin aging caused by the sun.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>10544-266-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (10544-266-30)</PackageDescription>
    <NDC11Code>10544-0266-30</NDC11Code>
    <ProductNDC>10544-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20131118</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021210</ApplicationNumber>
    <LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
    <StrengthNumber>.15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>l-Thyroxine [EPC],Thyroxine [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Levothyroxine sodium is used for the following indications. Hypothyroidism - As replacement or supplemental therapy in congenital or acquired hypothyroidism of any etiology, except transient hypothyroidism during the recovery phase of subacute thyroiditis. Specific indications include: primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) hypothyroidism and subclinical hypothyroidism. Primary hypothyroidism may result from functional deficiency, primary atrophy, partial or total congenital absence of the thyroid gland, or from the effects of surgery, radiation, or drugs, with or without the presence of goiter. Pituitary TSH Suppression - In the treatment or prevention of various types of euthyroid goiters (see WARNINGS and PRECAUTIONS), including thyroid nodules (see WARNINGS and PRECAUTIONS), subacute or chronic Iymphocytic thyroiditis (Hashimoto's thyroiditis), multinodular goiter (see WARNINGS and PRECAUTIONS), and, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer.</IndicationAndUsage>
    <Description>Levothyroxine Sodium Tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T 4) sodium]. Synthetic T 4 is identical to that produced in the human thyroid gland. Levothyroxine (T 4) sodium has an empirical formula of C 15H 10I 4N NaO 4  H 2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown:.</Description>
  </NDC>
  <NDC>
    <NDCCode>11673-266-16</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (11673-266-16)  / 59 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>11673-0266-16</NDC11Code>
    <ProductNDC>11673-266</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Up And Up Infants Acetaminophen</ProprietaryName>
    <NonProprietaryName>Acetaminophen</NonProprietaryName>
    <DosageFormName>SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150421</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M013</ApplicationNumber>
    <LabelerName>Target Corporation</LabelerName>
    <SubstanceName>ACETAMINOPHEN</SubstanceName>
    <StrengthNumber>160</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150421</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily: 1 reduces fever, 2 relieves minor aches and pains due to:, 3 the common cold, 4 flu, 5 headache, 6 sore throat, 7 toothache.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>13668-266-28</NDCCode>
    <PackageDescription>14 BLISTER PACK in 1 PACKAGE, COMBINATION (13668-266-28)  / 1 KIT in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>13668-0266-28</NDC11Code>
    <ProductNDC>13668-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lamotrigine</ProprietaryName>
    <NonProprietaryName>Lamotrigine</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20090127</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078947</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2026-07-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090127</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lamotrigine tablet is indicated for:. Epilepsy—adjunctive therapy in patients aged 2 years and older: 1 partial-onset seizures., 2 primary generalized tonic-clonic (PGTC) seizures., 3 generalized seizures of Lennox-Gastaut syndrome. (1.1).</IndicationAndUsage>
    <Description>Lamotrigine, USP an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine, USP is a white to pale cream-colored powder and has a pKa of 5.7. Lamotrigine, USP is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is. Lamotrigine tablets, USP are supplied for oral administration as 25-mg (white to off white), 100-mg (white to off white), 150-mg (white to off white), and 200-mg (white to off white) tablets. Each tablet contains the labeled amount of lamotrigine, USP and the following inactive ingredients: lactose monohydrate; magnesium stearate; microcrystalline cellulose; povidone; and sodium starch glycolate. Meets USP Dissolution Test 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-266-99</NDCCode>
    <PackageDescription>7 BLISTER PACK in 1 PACKAGE, COMBINATION (13668-266-99)  / 1 KIT in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>13668-0266-99</NDC11Code>
    <ProductNDC>13668-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lamotrigine</ProprietaryName>
    <NonProprietaryName>Lamotrigine</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20090127</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078947</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2026-07-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090127</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lamotrigine tablet is indicated for:. Epilepsy—adjunctive therapy in patients aged 2 years and older: 1 partial-onset seizures., 2 primary generalized tonic-clonic (PGTC) seizures., 3 generalized seizures of Lennox-Gastaut syndrome. (1.1).</IndicationAndUsage>
    <Description>Lamotrigine, USP an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine, USP is a white to pale cream-colored powder and has a pKa of 5.7. Lamotrigine, USP is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is. Lamotrigine tablets, USP are supplied for oral administration as 25-mg (white to off white), 100-mg (white to off white), 150-mg (white to off white), and 200-mg (white to off white) tablets. Each tablet contains the labeled amount of lamotrigine, USP and the following inactive ingredients: lactose monohydrate; magnesium stearate; microcrystalline cellulose; povidone; and sodium starch glycolate. Meets USP Dissolution Test 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>24658-266-93</NDCCode>
    <PackageDescription>378 g in 1 JAR (24658-266-93) </PackageDescription>
    <NDC11Code>24658-0266-93</NDC11Code>
    <ProductNDC>24658-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cholestyramine</ProprietaryName>
    <NonProprietaryName>Cholestyramine</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230314</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074557</ApplicationNumber>
    <LabelerName>PURACAP LABORATORIES LLC DBA BLU PHARMACEUTICALS</LabelerName>
    <SubstanceName>CHOLESTYRAMINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>g/9g</StrengthUnit>
    <Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240429</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1) Cholestyramine for Oral Suspension, USP powder is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for Oral Suspension, USP powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (&lt;4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels &gt; 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. *Coronary heart disease or peripheral vascular disease (including symptomatic carotid artery disease). : 1  †Other risk factors for coronary heart disease (CHD) include: age (males ≥ 45 years; females: ≥ 55 years or premature menopause without estrogen replacement therapy); family history of premature CHD; current cigarette smoking; hypertension; confirmed HDL-C &lt;35 mg/dL (&lt;0.91 mmol/L); and diabetes mellitus. Subtract one risk factor if HDL-C is ≥ 60 mg/dL (≥ 1.6 mmol/L).</IndicationAndUsage>
    <Description>Cholestyramine for Oral Suspension, USP powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Each Nine grams of Cholestyramine for Oral Suspension, USP powder contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Representation of structure of main polymeric groups. Inactive ingredients: citric acid anhydrous, fructose, mono ammonium glycyrrhizinate, pectin, propylene glycol alginate, sorbitol, sucrose, xanthan gum, natural and artificial orange flavor, D&amp;C yellow No. 10 aluminum lake, FD&amp;C yellow No. 6 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>24658-266-95</NDCCode>
    <PackageDescription>60 POUCH in 1 CARTON (24658-266-95)  / 9 g in 1 POUCH</PackageDescription>
    <NDC11Code>24658-0266-95</NDC11Code>
    <ProductNDC>24658-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cholestyramine</ProprietaryName>
    <NonProprietaryName>Cholestyramine</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230314</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074557</ApplicationNumber>
    <LabelerName>PURACAP LABORATORIES LLC DBA BLU PHARMACEUTICALS</LabelerName>
    <SubstanceName>CHOLESTYRAMINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>g/9g</StrengthUnit>
    <Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230314</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1) Cholestyramine for Oral Suspension, USP powder is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for Oral Suspension, USP powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (&lt;4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels &gt; 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. *Coronary heart disease or peripheral vascular disease (including symptomatic carotid artery disease). : 1  †Other risk factors for coronary heart disease (CHD) include: age (males ≥ 45 years; females: ≥ 55 years or premature menopause without estrogen replacement therapy); family history of premature CHD; current cigarette smoking; hypertension; confirmed HDL-C &lt;35 mg/dL (&lt;0.91 mmol/L); and diabetes mellitus. Subtract one risk factor if HDL-C is ≥ 60 mg/dL (≥ 1.6 mmol/L).</IndicationAndUsage>
    <Description>Cholestyramine for Oral Suspension, USP powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Each Nine grams of Cholestyramine for Oral Suspension, USP powder contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Representation of structure of main polymeric groups. Inactive ingredients: citric acid anhydrous, fructose, mono ammonium glycyrrhizinate, pectin, propylene glycol alginate, sorbitol, sucrose, xanthan gum, natural and artificial orange flavor, D&amp;C yellow No. 10 aluminum lake, FD&amp;C yellow No. 6 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>24658-266-97</NDCCode>
    <PackageDescription>378 g in 1 CAN (24658-266-97) </PackageDescription>
    <NDC11Code>24658-0266-97</NDC11Code>
    <ProductNDC>24658-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cholestyramine</ProprietaryName>
    <NonProprietaryName>Cholestyramine</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230314</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074557</ApplicationNumber>
    <LabelerName>PURACAP LABORATORIES LLC DBA BLU PHARMACEUTICALS</LabelerName>
    <SubstanceName>CHOLESTYRAMINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>g/9g</StrengthUnit>
    <Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230314</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1) Cholestyramine for Oral Suspension, USP powder is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for Oral Suspension, USP powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (&lt;4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels &gt; 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. *Coronary heart disease or peripheral vascular disease (including symptomatic carotid artery disease). : 1  †Other risk factors for coronary heart disease (CHD) include: age (males ≥ 45 years; females: ≥ 55 years or premature menopause without estrogen replacement therapy); family history of premature CHD; current cigarette smoking; hypertension; confirmed HDL-C &lt;35 mg/dL (&lt;0.91 mmol/L); and diabetes mellitus. Subtract one risk factor if HDL-C is ≥ 60 mg/dL (≥ 1.6 mmol/L).</IndicationAndUsage>
    <Description>Cholestyramine for Oral Suspension, USP powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Each Nine grams of Cholestyramine for Oral Suspension, USP powder contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Representation of structure of main polymeric groups. Inactive ingredients: citric acid anhydrous, fructose, mono ammonium glycyrrhizinate, pectin, propylene glycol alginate, sorbitol, sucrose, xanthan gum, natural and artificial orange flavor, D&amp;C yellow No. 10 aluminum lake, FD&amp;C yellow No. 6 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>27241-266-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (27241-266-01) </PackageDescription>
    <NDC11Code>27241-0266-01</NDC11Code>
    <ProductNDC>27241-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Haloperidol</ProprietaryName>
    <NonProprietaryName>Haloperidol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260914</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218210</ApplicationNumber>
    <LabelerName>Ajanta Pharma USA Inc.</LabelerName>
    <SubstanceName>HALOPERIDOL</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260914</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
    <Description>Haloperidol, USP is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn), sodium lauryl sulfate and sodium starch glycolate. In addition, the 0.5 mg and 1 mg tablets also contain FD&amp;C Yellow No. 6 Aluminum Lake, 2 mg, 5 mg and 10 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake and 5 mg, 10 mg and 20 mg tablets contain FD&amp;C Blue no. 2 Aluminum Lake. FDA approved dissolution test specifications differ from USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-266-31</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (31722-266-31)  / 75 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>31722-0266-31</NDC11Code>
    <ProductNDC>31722-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Voriconazole</ProprietaryName>
    <NonProprietaryName>Voriconazole</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250808</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211598</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>VORICONAZOLE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250808</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Voriconazole for oral suspension is an azole antifungal indicated for the treatment of adults and pediatric patients 2 years of age and older with:  Invasive aspergillosis ( 1.1)   Candidemia in non-neutropenics and other deep tissue Candidainfections ( 1.2)  Esophageal candidiasis ( 1.3)   Serious fungal infections caused by Scedosporium apiospermumand Fusariumspecies including Fusarium solani, in patients intolerant of, or refractory to, other therapy ( 1.4).</IndicationAndUsage>
    <Description>Voriconazole an azole antifungal agent is available as a powder for oral suspension. The structural formula is. Voriconazole is designated chemically as 4-Pyrimidineethanol, α-(2,4-difluorophenyl)-5-fluoro-β-methyl- α-(1 H-1,2,4-triazol-1-ylmethyl)-, (α R, βS)- (αR, βS)-α-(2, 4-Difluorophenyl)-5-fluoro-β-methyl-α-(1 H- 1, 2, 4-triazol-1-ylmethyl)-4-pyrimidineethanol.  The molecular formula of voriconazole is C 16H 14F 3N 5O and its relative molecular mass is 349.31.  Voriconazole USP, drug substance is a white to almost white powder. Voriconazole for Oral Suspension is a white to off-white powder providing a white to off-white orange-flavored suspension when reconstituted. Bottles containing 45 grams powder for oral suspension, which contain 3 g of voriconazole, are intended for reconstitution with water to produce a suspension containing 40 mg/mL voriconazole. The inactive ingredients include anhydrous citric acid, orange flavor, sodium benzoate, silicon dioxide, sucrose, titanium dioxide, tri sodium citrate dihydrate and xanthan gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>33342-266-07</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (33342-266-07) </PackageDescription>
    <NDC11Code>33342-0266-07</NDC11Code>
    <ProductNDC>33342-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tadalafil</ProprietaryName>
    <NonProprietaryName>Tadalafil</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20191008</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207244</ApplicationNumber>
    <LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
    <SubstanceName>TADALAFIL</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191008</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tadalafil is a phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of: : 1 erectile dysfunction (ED) (1.1), 2 the signs and symptoms of benign prostatic hyperplasia (BPH) (1.2), 3 ED and the signs and symptoms of BPH (ED/BPH) (1.3).</IndicationAndUsage>
    <Description>Tadalafil USP is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil USP has the molecular formula C22H19N3O4 representing a molecular weight of 389.41. The structural formula is. The chemical designation is pyrazino[1′,2′:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP is available as almond-shaped tablets for oral administration. Each tablet contains 2.5 mg, 5 mg, 10 mg, or 20 mg of tadalafil USP and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, povidone, hypromellose, iron oxide yellow, lactose monohydrate, sodium citrate dihydrate, sodium stearyl fumarate, microcrystalline cellulose, sodium lauryl sulfate, talc, titanium dioxide, and triacetin.</Description>
  </NDC>
  <NDC>
    <NDCCode>33342-266-44</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (33342-266-44) </PackageDescription>
    <NDC11Code>33342-0266-44</NDC11Code>
    <ProductNDC>33342-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tadalafil</ProprietaryName>
    <NonProprietaryName>Tadalafil</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20191008</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207244</ApplicationNumber>
    <LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
    <SubstanceName>TADALAFIL</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250417</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tadalafil is a phosphodiesterase 5 (PDE5) inhibitor indicated for the treatment of: : 1 erectile dysfunction (ED) (1.1), 2 the signs and symptoms of benign prostatic hyperplasia (BPH) (1.2), 3 ED and the signs and symptoms of BPH (ED/BPH) (1.3).</IndicationAndUsage>
    <Description>Tadalafil USP is a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Tadalafil USP has the molecular formula C22H19N3O4 representing a molecular weight of 389.41. The structural formula is. The chemical designation is pyrazino[1′,2′:1,6]pyrido[3,4-b]indole-1,4-dione, 6-(1,3-benzodioxol-5-yl)2,3,6,7,12,12a-hexahydro-2-methyl-, (6R,12aR)-. It is a crystalline solid that is practically insoluble in water and very slightly soluble in ethanol. Tadalafil tablets, USP is available as almond-shaped tablets for oral administration. Each tablet contains 2.5 mg, 5 mg, 10 mg, or 20 mg of tadalafil USP and the following inactive ingredients: croscarmellose sodium, colloidal silicon dioxide, povidone, hypromellose, iron oxide yellow, lactose monohydrate, sodium citrate dihydrate, sodium stearyl fumarate, microcrystalline cellulose, sodium lauryl sulfate, talc, titanium dioxide, and triacetin.</Description>
  </NDC>
  <NDC>
    <NDCCode>42254-266-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (42254-266-30)</PackageDescription>
    <NDC11Code>42254-0266-30</NDC11Code>
    <ProductNDC>42254-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metoclopramide Hydrochloride</ProprietaryName>
    <NonProprietaryName>Metoclopramide Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA071250</ApplicationNumber>
    <LabelerName>Rebel Distributors Corp</LabelerName>
    <SubstanceName>METOCLOPRAMIDE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>The use of metoclopramide tablets is recommended for adults only. Therapy should not exceed 12 weeks in duration.</IndicationAndUsage>
    <Description>Metoclopramide hydrochloride is a white or practically white, crystalline, odorless or practically odorless powder. It is very soluble in water, freely soluble in alcohol, sparingly soluble in chloroform, practically insoluble in ether. Chemically, it is 4-amino-5-chloro-N-[2-(diethylamino) ethyl]-2-methoxybenzamide monohydrochloride monohydrate. Its structural formula is as follows. Each tablet for oral administration contains metoclopramide hydrochloride, equivalent to either 5 mg or 10 mg metoclopramide. Tablets also contain as inactive ingredients anhydrous lactose, magnesium stearate, povidone, pregelatinized starch, sodium starch glycolate and (5 mg only) D&amp;C Yellow #10 and FD&amp;C Blue #1.</Description>
  </NDC>
  <NDC>
    <NDCCode>42495-266-30</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BLISTER PACK (42495-266-30)</PackageDescription>
    <NDC11Code>42495-0266-30</NDC11Code>
    <ProductNDC>42495-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121015</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090007</ApplicationNumber>
    <LabelerName>MSM Repackaging</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Gabapentin Capsules, USP are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
    <Description>The active ingredient in Gabapentin Capsules, USP is gabapentin,USP which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Gabapentin Capsules, USP contain 100 mg, 300 mg, or 400 mg of gabapentin, USP and the following inactive ingredients: lactose monohydrate, corn starch, and talc. The 100 mg capsule shell contains gelatin and titanium dioxide. The 300 mg capsule shell contains gelatin, titanium dioxide, and yellow iron oxide. The 400 mg capsule shell contains gelatin, red iron oxide, titanium dioxide, and yellow iron oxide. The imprinting ink contains FD&amp;C Blue No. 2, propylene glycol and shellac.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-266-95</NDCCode>
    <PackageDescription>60 POUCH in 1 CARTON (42806-266-95)  / 9 g in 1 POUCH (42806-266-98) </PackageDescription>
    <NDC11Code>42806-0266-95</NDC11Code>
    <ProductNDC>42806-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cholestyramine</ProprietaryName>
    <NonProprietaryName>Cholestyramine</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20211215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074557</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>CHOLESTYRAMINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>g/9g</StrengthUnit>
    <Pharm_Classes>Bile Acid Sequestrant [EPC], Bile-acid Binding Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1) Cholestyramine for Oral Suspension, USP powder is indicated as adjunctive therapy to diet for the reduction of elevated serum cholesterol in patients with primary hypercholesterolemia (elevated low density lipoprotein [LDL] cholesterol) who do not respond adequately to diet. Cholestyramine for Oral Suspension, USP powder may be useful to lower LDL cholesterol in patients who also have hypertriglyceridemia, but it is not indicated where hypertriglyceridemia is the abnormality of most concern. Therapy with lipid-altering agents should be a component of multiple risk factor intervention in those individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Treatment should begin and continue with dietary therapy specific for the type of hyperlipoproteinemia determined prior to initiation of drug therapy. Excess body weight may be an important factor and caloric restriction for weight normalization should be addressed prior to drug therapy in the overweight. Prior to initiating therapy with cholestyramine resin, secondary causes of hypercholesterolemia (e.g., poorly controlled diabetes mellitus, hypothyroidism, nephrotic syndrome, dysproteinemias, obstructive liver disease, other drug therapy, alcoholism), should be excluded and a lipid profile performed to assess Total cholesterol, HDL-C and triglycerides (TG). For individuals with TG less than 400 mg/dL (&lt;4.5 mmol/L), LDL-C can be estimated using the following equation. LDL-C = Total cholesterol - [(TG/5) + HDL-C]. For TG levels &gt; 400 mg/dL, this equation is less accurate and LDL-C concentrations should be determined by ultracentrifugation. In hypertriglyceridemic patients, LDL-C may be low or normal despite elevated Total-C. In such cases cholestyramine resin may not be indicated. Serum cholesterol and triglyceride levels should be determined periodically based on NCEP guidelines to confirm initial and adequate long-term response. A favorable trend in cholesterol reduction should occur during the first month of cholestyramine resin therapy. The therapy should be continued to sustain cholesterol reduction. If adequate cholesterol reduction is not attained, increasing the dosage of cholestyramine resin or adding other lipid-lowering agents in combination with cholestyramine resin should be considered. Since the goal of treatment is to lower LDL-C, the NCEP4 recommends that LDL-C levels be used to initiate and assess treatment response. If LDL-C levels are not available then Total-C alone may be used to monitor long-term therapy. A lipoprotein analysis (including LDL-C determination) should be carried out once a year. The NCEP treatment guidelines are summarized below. *Coronary heart disease or peripheral vascular disease (including symptomatic carotid artery disease). : 1  †Other risk factors for coronary heart disease (CHD) include: age (males 45 years; females: 55 years or premature menopause without estrogen replacement therapy); family history of premature CHD; current cigarette smoking; hypertension; confirmed HDL-C &lt;35 mg/dL (&lt;0.91 mmol/L); and diabetes mellitus. Subtract one risk factor if HDL-C is 60 mg/dL (1.6 mmol/L).</IndicationAndUsage>
    <Description>Cholestyramine for Oral Suspension, USP powder, the chloride salt of a basic anion exchange resin, a cholesterol lowering agent, is intended for oral administration. Cholestyramine resin is quite hydrophilic, but insoluble in water. Cholestyramine resin is not absorbed from the digestive tract. Each Nine grams of Cholestyramine for Oral Suspension, USP powder contain 4 grams of cholestyramine resin. It is represented by the following structural formula. Representation of structure of main polymeric groups. Inactive ingredients: citric acid anhydrous, fructose, mono ammonium glycyrrhizinate, pectin, propylene glycol alginate, sorbitol, sucrose, xanthan gum, natural and artificial orange flavor, D&amp;C yellow No. 10 aluminum lake, FD&amp;C yellow No. 6 aluminum lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>43063-266-07</NDCCode>
    <PackageDescription>7 TABLET in 1 BOTTLE, PLASTIC (43063-266-07) </PackageDescription>
    <NDC11Code>43063-0266-07</NDC11Code>
    <ProductNDC>43063-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dexamethasone</ProprietaryName>
    <NonProprietaryName>Dexamethasone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19820826</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA087916</ApplicationNumber>
    <LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DEXAMETHASONE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, and serum sickness.</IndicationAndUsage>
    <Description>Dexamethasone Tablets, USP are available for oral administration containing either 0.5 mg, 0.75 mg, 1 mg, 1.5 mg, 2 mg, 4 mg or 6 mg of dexamethasone, USP. Each tablet contains the following inactive ingredients: lactose monohydrate, magnesium stearate, starch, sugar, D&amp;C Yellow #10 (0.5 mg and 4 mg), FD&amp;C Blue #1 (0.75 mg and 1.5 mg), FD&amp;C Green #3 (4 mg and 6 mg), FD&amp;C Red #3 (1.5 mg), FD&amp;C Red #40 (1.5 mg), FD&amp;C Yellow #6 (0.5 mg and 4 mg) and Yellow Iron Oxide (1 mg). Dexamethasone Oral Solution, USP is formulated for oral administration containing 0.5 mg per 5 mL of dexamethasone, USP. The cherry brandy flavored oral solution contains the following inactive ingredients: anhydrous citric acid, cherry brandy flavor, disodium edetate, glycerin, methylparaben, propylene glycol, propylparaben, sorbitol solution and water. Dexamethasone Oral Solution, USP Intensol (Concentrate) is formulated for oral administration containing 1 mg per mL of dexamethasone, USP. In addition, the oral solution contains the following inactive ingredients: alcohol 30% v/v, anhydrous citric acid, benzoic acid, disodium edetate, propylene glycol and water. Dexamethasone, a synthetic adrenocortical steroid, is a white to practically white, odorless, crystalline powder. It is stable in air. It is practically insoluble in water. The empirical formula is C 22H 29FO 5. The molecular weight is 392.46. It is designated chemically as 9-fluoro-11β,17,21-trihydroxy-16α-methylpregna-1,4-diene,3,20-dione and the structural formula is:.</Description>
  </NDC>
  <NDC>
    <NDCCode>43353-266-09</NDCCode>
    <PackageDescription>9000 TABLET in 1 BOTTLE, PLASTIC (43353-266-09)</PackageDescription>
    <NDC11Code>43353-0266-09</NDC11Code>
    <ProductNDC>43353-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
    <NonProprietaryName>Ropinirole</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160620</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078881</ApplicationNumber>
    <LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
    <SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-10</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Ropinirole tablets are a non-ergoline dopamine agonist indicated for the treatment of Parkinson’s disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS) (1.1, 1.2).</IndicationAndUsage>
    <Description>Ropinirole tablets, USP contain ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(Dipropylamino)-ethyl]-1,3-dihydro-2H-indol-2-one monohydrochloride and the molecular formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). Ropinirole hydrochloride, USP is a white to cream colored crystalline powder solid with a melting range of 241° to 245°C and a solubility of 133 mg/mL in water. Each tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg or 5 mg. Inactive ingredients consist of: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. In addition, the 0.5 mg strength also contains D&amp;C Yellow No. 10 Aluminum Lake. The 1 mg strength also contains D&amp;C Yellow No. 10 Aluminum Lake and FD&amp;C Blue No. 2 Aluminum Lake. The 2 mg strength also contains D&amp;C Yellow No. 10 Aluminum Lake, FD&amp;C Blue No. 2 Aluminum Lake and FD&amp;C Yellow No. 6 Aluminum Lake. The 3 mg strength also contains D&amp;C Yellow No. 10 Aluminum Lake, FD&amp;C Blue No. 2 Aluminum Lake, FD&amp;C Yellow No. 6 Aluminum Lake and FD&amp;C Red No. 40 Aluminum Lake. The 4 mg strength also contains D&amp;C Yellow No. 10 Aluminum Lake, FD&amp;C Blue No. 2 Aluminum Lake, FD&amp;C Yellow No. 6 Aluminum Lake and FD&amp;C Red No. 40 Aluminum Lake. The 5 mg strength also contains D&amp;C Yellow No. 10 Aluminum Lake, FD&amp;C Blue No. 2 Aluminum Lake, FD&amp;C Yellow No. 6 Aluminum Lake and FD&amp;C Red No. 40 Aluminum Lake. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-266-05</NDCCode>
    <PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-266-05) </PackageDescription>
    <NDC11Code>43602-0266-05</NDC11Code>
    <ProductNDC>43602-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200924</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212133</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200924</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydromorphone hydrochloride extended-release tablets are indicated for the management of pain in opioid-tolerant patients severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Patients considered opioid tolerant are those who are receiving, for one week or longer, at least 60 mg oral morphine per day, 25 mcg transdermal fentanyl per hour, 30 mg oral oxycodone per day, 8 mg oral hydromorphone per day, 25 mg oral oxymorphone per day, 60 mg oral hydrocodone per day, or an equianalgesic dose of another opioid. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve hydromorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Hydromorphone hydrochloride extended-release tablets is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
    <Description>Hydromorphone hydrochloride extended-release tablets are for oral use and contain hydromorphone hydrochloride, an opioid agonist. Hydromorphone hydrochloride USP is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Its empirical formula is C17H19NO3HCl. The compound has the following structural formula. Hydromorphone hydrochloride extended-release tablets also contains the following inactive ingredients: Polyethylene Oxide, Povidone, butylated hydroxytoluene, Isopropyl Alcohol, Magnesium Stearate, Sodium Chloride, Hydroxypropyl Methyl Cellulose, Ferric Oxide Yellow, Acetone, Cellulose acetate, Polyethylene glycol, hypromellose and titanium dioxide. The 8 mg, 12 mg and 16 mg also contains iron oxide yellow and polysorbate. The 32 mg also contains talc, black iron oxide and propylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-266-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (43602-266-30) </PackageDescription>
    <NDC11Code>43602-0266-30</NDC11Code>
    <ProductNDC>43602-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydromorphone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200924</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212133</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200924</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hydromorphone hydrochloride extended-release tablets are indicated for the management of pain in opioid-tolerant patients severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Patients considered opioid tolerant are those who are receiving, for one week or longer, at least 60 mg oral morphine per day, 25 mcg transdermal fentanyl per hour, 30 mg oral oxycodone per day, 8 mg oral hydromorphone per day, 25 mg oral oxymorphone per day, 60 mg oral hydrocodone per day, or an equianalgesic dose of another opioid. Limitations of Use: 1 Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve hydromorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Hydromorphone hydrochloride extended-release tablets is not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
    <Description>Hydromorphone hydrochloride extended-release tablets are for oral use and contain hydromorphone hydrochloride, an opioid agonist. Hydromorphone hydrochloride USP is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. Its empirical formula is C17H19NO3HCl. The compound has the following structural formula. Hydromorphone hydrochloride extended-release tablets also contains the following inactive ingredients: Polyethylene Oxide, Povidone, butylated hydroxytoluene, Isopropyl Alcohol, Magnesium Stearate, Sodium Chloride, Hydroxypropyl Methyl Cellulose, Ferric Oxide Yellow, Acetone, Cellulose acetate, Polyethylene glycol, hypromellose and titanium dioxide. The 8 mg, 12 mg and 16 mg also contains iron oxide yellow and polysorbate. The 32 mg also contains talc, black iron oxide and propylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-266-10</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 CARTON (46708-266-10) </PackageDescription>
    <NDC11Code>46708-0266-10</NDC11Code>
    <ProductNDC>46708-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ropinirole</ProprietaryName>
    <NonProprietaryName>Ropinirole</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130314</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202786</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>12</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130314</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ropinirole extended-release tablets are non-ergoline dopamine agonist indicated for the treatment of Parkinson’s disease (1.1).</IndicationAndUsage>
    <Description>Ropinirole extended-release tablets contains ropinirole, a non-ergoline dopamine agonist as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to yellow solid with a melting range of 243° to 250°C and a solubility of 133 mg/mL in water. Each capsule shaped, film coated tablet contains 2.28 mg, 4.56 mg, 6.84 mg, 9.12 mg, or 13.68 mg ropinirole hydrochloride equivalent to ropinirole 2 mg, 4 mg, 6 mg, 8 mg, or 12 mg, respectively. Inactive ingredients consist of carboxymethylcellulose sodium, colloidal silicon dioxide, hydrogenated castor oil, hypromellose, magnesium stearate, povidone, pregelatinized starch, ethylcellulose and one or more of the following: FD&amp;C Blue No. 2 aluminum lake, ferric oxides (black, red, yellow), polyethylene glycol 6000, polyethylene glycol 8000, titanium dioxide, talc.</Description>
  </NDC>
</NDCList>