{
"NDC": [
{
"NDCCode": "49288-0291-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0291-3)",
"NDC11Code": "49288-0291-03",
"ProductNDC": "49288-0291",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Lobster",
"NonProprietaryName": "Lobster",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "LOBSTER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0291-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0291-1)",
"NDC11Code": "49288-0291-01",
"ProductNDC": "49288-0291",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Lobster",
"NonProprietaryName": "Lobster",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "LOBSTER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0291-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0291-2)",
"NDC11Code": "49288-0291-02",
"ProductNDC": "49288-0291",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Lobster",
"NonProprietaryName": "Lobster",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "LOBSTER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0291-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0291-4)",
"NDC11Code": "49288-0291-04",
"ProductNDC": "49288-0291",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Lobster",
"NonProprietaryName": "Lobster",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "LOBSTER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0291-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0291-5)",
"NDC11Code": "49288-0291-05",
"ProductNDC": "49288-0291",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Lobster",
"NonProprietaryName": "Lobster",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "LOBSTER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "11822-0291-3",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (11822-0291-3) > 200 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
"NDC11Code": "11822-0291-03",
"ProductNDC": "11822-0291",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19880524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075010",
"LabelerName": "Rite Aid Corporation",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "19880524",
"SamplePackage": "N"
},
{
"NDCCode": "15631-0291-3",
"PackageDescription": "750 PELLET in 1 PACKAGE (15631-0291-3) ",
"NDC11Code": "15631-0291-03",
"ProductNDC": "15631-0291",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mercurius Corrosivus",
"NonProprietaryName": "Mercurius Corrosivus",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150909",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "MERCURIC CHLORIDE",
"StrengthNumber": "6",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "37662-0291-3",
"PackageDescription": "4000 PELLET in 1 BOTTLE, GLASS (37662-0291-3) ",
"NDC11Code": "37662-0291-03",
"ProductNDC": "37662-0291",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cicuta Virosa",
"NonProprietaryName": "Cicuta Virosa",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220602",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "CICUTA VIROSA ROOT",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220602",
"SamplePackage": "N"
},
{
"NDCCode": "70518-0291-0",
"PackageDescription": "3 TABLET, ORALLY DISINTEGRATING in 1 CARTON (70518-0291-0) ",
"NDC11Code": "70518-0291-00",
"ProductNDC": "70518-0291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20170308",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078050",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "ONDANSETRON",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA],Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-03-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20170308",
"SamplePackage": "N"
},
{
"NDCCode": "71335-0291-3",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE (71335-0291-3) ",
"NDC11Code": "71335-0291-03",
"ProductNDC": "71335-0291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160620",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205119",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220628",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets USP, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is. Pantoprazole sodium, USP sesquihydrate is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium, USP sesquihydrate is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium, USP sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: ammonium hydroxide, crospovidone, hydroxyl propyl cellulose, hypromellose, iron oxide black, iron oxide yellow, mannitol, methacrylic acid copolymer dispersion, polyethylene glycol, polyvinyl alcohol, povidone, propylene glycol, shellac, sodium carbonate, sodium hydroxide, sodium stearyl fumarate, talc, titanium dioxide and triethyl citrate. Pantoprazole sodium delayed-release tablets, USP (40 mg and 20 mg) complies with USP dissolution test 2."
},
{
"NDCCode": "71335-0291-9",
"PackageDescription": "3 TABLET, DELAYED RELEASE in 1 BOTTLE (71335-0291-9) ",
"NDC11Code": "71335-0291-09",
"ProductNDC": "71335-0291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160620",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205119",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220628",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets USP, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is. Pantoprazole sodium, USP sesquihydrate is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium, USP sesquihydrate is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium, USP sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: ammonium hydroxide, crospovidone, hydroxyl propyl cellulose, hypromellose, iron oxide black, iron oxide yellow, mannitol, methacrylic acid copolymer dispersion, polyethylene glycol, polyvinyl alcohol, povidone, propylene glycol, shellac, sodium carbonate, sodium hydroxide, sodium stearyl fumarate, talc, titanium dioxide and triethyl citrate. Pantoprazole sodium delayed-release tablets, USP (40 mg and 20 mg) complies with USP dissolution test 2."
},
{
"NDCCode": "80425-0291-3",
"PackageDescription": "90 TABLET in 1 BOTTLE (80425-0291-3) ",
"NDC11Code": "80425-0291-03",
"ProductNDC": "80425-0291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carisoprodol",
"NonProprietaryName": "Carisoprodol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203374",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "CARISOPRODOL",
"StrengthNumber": "350",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230331",
"SamplePackage": "N",
"IndicationAndUsage": "Carisoprodol is indicated for the relief of discomfort associated with acute, painful musculoskeletal conditions in adults. Limitation of Use. Carisoprodol should only be used for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use has not been established and because acute, painful musculoskeletal conditions are generally of short duration. [ see DOSAGE AND ADMINISTRATION (2)].",
"Description": "Carisoprodol tablets, USP are available as 350 mg round, white tablets. Carisoprodol, USP is a white, crystalline powder, having a mild, characteristic odor. It is very slightly soluble in water; freely soluble in alcohol, in chloroform, and in acetone; and its solubility is practically independent of pH. Carisoprodol is present as a racemic mixture. Chemically, carisoprodol is (±)-2-Methyl-2-propyl-1,3-propanediol carbamate isopropylcarbamate and the molecular formula is C 12H 24N 2O 4, with a molecular weight of 260.33. The structural formula is. Other ingredients in the Carisoprodol tablets USP, 350 mg include microcrystalline cellulose, lactose monohydrate, pregelatinized starch (maize), croscarmellose sodium, povidone, silicon dioxide and magnesium stearate."
},
{
"NDCCode": "0069-0291-01",
"PackageDescription": "1 SYRINGE in 1 CARTON (0069-0291-01) / .5 mL in 1 SYRINGE",
"NDC11Code": "00069-0291-01",
"ProductNDC": "0069-0291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nivestym",
"NonProprietaryName": "Filgrastim-aafi",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20180924",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761080",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "FILGRASTIM",
"StrengthNumber": "300",
"StrengthUnit": "ug/.5mL",
"Pharm_Classes": "Granulocyte Colony-Stimulating Factor [CS], Increased Myeloid Cell Production [PE], Leukocyte Growth Factor [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180924",
"SamplePackage": "N",
"IndicationAndUsage": "NIVESTYM is a leukocyte growth factor indicated to: 1 Decrease the incidence of infection‚ as manifested by febrile neutropenia‚ in patients with nonmyeloid malignancies receiving myelosuppressive anti-cancer drugs associated with a significant incidence of severe neutropenia with fever. (1.1), 2 Reduce the time to neutrophil recovery and the duration of fever, following induction or consolidation chemotherapy treatment of patients with acute myeloid leukemia (AML). (1.2), 3 Reduce the duration of neutropenia and neutropenia-related clinical sequelae‚ e.g.‚ febrile neutropenia, in patients with nonmyeloid malignancies undergoing myeloablative chemotherapy followed by bone marrow transplantation (BMT). (1.3), 4 Mobilize autologous hematopoietic progenitor cells into the peripheral blood for collection by leukapheresis. (1.4), 5 Reduce the incidence and duration of sequelae of severe neutropenia (e.g.‚ fever‚ infections‚ oropharyngeal ulcers) in symptomatic patients with congenital neutropenia‚ cyclic neutropenia‚ or idiopathic neutropenia. (1.5).",
"Description": "Filgrastim-aafi is a 175 amino acid human granulocyte colony-stimulating factor (G-CSF) manufactured by recombinant DNA technology. NIVESTYM is produced by Escherichia coli (E coli) bacteria into which has been inserted the human granulocyte colony-stimulating factor gene. NIVESTYM has a molecular weight of 18‚799 daltons. The protein has an amino acid sequence that is identical to the natural sequence predicted from human DNA sequence analysis‚ except for the addition of an N-terminal methionine necessary for expression in E coli. Because NIVESTYM is produced in E coli‚ the product is non-glycosylated and thus differs from G-CSF isolated from a human cell. NIVESTYM is a sterile‚ clear‚ colorless‚ preservative-free liquid containing filgrastim-aafi injection for subcutaneous or intravenous use. The product is available in single-dose vials for subcutaneous or intravenous use and prefilled syringes for subcutaneous use. The single-dose vials contain either 300 mcg/mL or 480 mcg/1.6 mL of filgrastim-aafi. The single-dose prefilled syringes contain either 300 mcg/0.5 mL or 480 mcg/0.8 mL of filgrastim-aafi. The final pH range of the NIVESTYM drug product solution is 3.8 to 4.3. See Table 4 below for product composition of each single-dose vial or prefilled syringe."
},
{
"NDCCode": "0069-0291-10",
"PackageDescription": "10 CARTON in 1 CARTON (0069-0291-10) / 1 SYRINGE in 1 CARTON (0069-0291-01) / .5 mL in 1 SYRINGE",
"NDC11Code": "00069-0291-10",
"ProductNDC": "0069-0291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nivestym",
"NonProprietaryName": "Filgrastim-aafi",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20180924",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761080",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"SubstanceName": "FILGRASTIM",
"StrengthNumber": "300",
"StrengthUnit": "ug/.5mL",
"Pharm_Classes": "Granulocyte Colony-Stimulating Factor [CS], Increased Myeloid Cell Production [PE], Leukocyte Growth Factor [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180924",
"SamplePackage": "N",
"IndicationAndUsage": "NIVESTYM is a leukocyte growth factor indicated to: 1 Decrease the incidence of infection‚ as manifested by febrile neutropenia‚ in patients with nonmyeloid malignancies receiving myelosuppressive anti-cancer drugs associated with a significant incidence of severe neutropenia with fever. (1.1), 2 Reduce the time to neutrophil recovery and the duration of fever, following induction or consolidation chemotherapy treatment of patients with acute myeloid leukemia (AML). (1.2), 3 Reduce the duration of neutropenia and neutropenia-related clinical sequelae‚ e.g.‚ febrile neutropenia, in patients with nonmyeloid malignancies undergoing myeloablative chemotherapy followed by bone marrow transplantation (BMT). (1.3), 4 Mobilize autologous hematopoietic progenitor cells into the peripheral blood for collection by leukapheresis. (1.4), 5 Reduce the incidence and duration of sequelae of severe neutropenia (e.g.‚ fever‚ infections‚ oropharyngeal ulcers) in symptomatic patients with congenital neutropenia‚ cyclic neutropenia‚ or idiopathic neutropenia. (1.5).",
"Description": "Filgrastim-aafi is a 175 amino acid human granulocyte colony-stimulating factor (G-CSF) manufactured by recombinant DNA technology. NIVESTYM is produced by Escherichia coli (E coli) bacteria into which has been inserted the human granulocyte colony-stimulating factor gene. NIVESTYM has a molecular weight of 18‚799 daltons. The protein has an amino acid sequence that is identical to the natural sequence predicted from human DNA sequence analysis‚ except for the addition of an N-terminal methionine necessary for expression in E coli. Because NIVESTYM is produced in E coli‚ the product is non-glycosylated and thus differs from G-CSF isolated from a human cell. NIVESTYM is a sterile‚ clear‚ colorless‚ preservative-free liquid containing filgrastim-aafi injection for subcutaneous or intravenous use. The product is available in single-dose vials for subcutaneous or intravenous use and prefilled syringes for subcutaneous use. The single-dose vials contain either 300 mcg/mL or 480 mcg/1.6 mL of filgrastim-aafi. The single-dose prefilled syringes contain either 300 mcg/0.5 mL or 480 mcg/0.8 mL of filgrastim-aafi. The final pH range of the NIVESTYM drug product solution is 3.8 to 4.3. See Table 4 below for product composition of each single-dose vial or prefilled syringe."
},
{
"NDCCode": "14783-291-01",
"PackageDescription": "30 mL in 1 BOX (14783-291-01) ",
"NDC11Code": "14783-0291-01",
"ProductNDC": "14783-291",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lbel Effet Parfait Signs Of Age Appearance Minimizer Foundation Spf 20 Fm Claire 3",
"NonProprietaryName": "Octinoxate, Titanium Dioxide",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210730",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura International LTD",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE",
"StrengthNumber": "7; 2.44",
"StrengthUnit": "g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210730",
"SamplePackage": "N",
"IndicationAndUsage": "Stop use and ask a doctor if rash occurs."
},
{
"NDCCode": "15127-291-26",
"PackageDescription": "118 mL in 1 BOTTLE, PLASTIC (15127-291-26) ",
"NDC11Code": "15127-0291-26",
"ProductNDC": "15127-291",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Select Brand Anti-nausea",
"NonProprietaryName": "Phosphorated Carbohydrate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20080101",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "L&R Distributors",
"SubstanceName": "PHOSPHORIC ACID; SUCROSE",
"StrengthNumber": "21.5; 3.74",
"StrengthUnit": "mg/5mL; g/5mL",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20140929",
"SamplePackage": "N",
"IndicationAndUsage": "For relief of nausea due to upset stomach from intestinal flu, stomach flu, and food or drink indiscretions."
},
{
"NDCCode": "16590-291-37",
"PackageDescription": "240 mL in 1 BOTTLE (16590-291-37)",
"NDC11Code": "16590-0291-37",
"ProductNDC": "16590-291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisolone",
"NonProprietaryName": "Prednisolone",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20030227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040401",
"LabelerName": "Stat Rx USA",
"SubstanceName": "PREDNISOLONE",
"StrengthNumber": "15",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Prednisolone Oral Solution is indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Psoriatic arthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Ankylosing spondylitis. Acute and subacute bursitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus. Bullous dermatitis herpetiformis. Severe erythema multiforme. (Stevens-Johnson syndrome). Exfoliative dermatitis. Mycosis fungoides. Severe psoriasis. Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers. Herpes zoster ophthalmicus. Anterior segment inflammation. Diffuse posterior uveitis and choroiditis. Sympathetic ophthalmia. Allergic conjunctivitis. Keratitis. Chorioretinitis. Optic neuritis. Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis. Loeffler’s syndrome not manageable by other means. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults. Secondary thrombocytopenia in adults. Acquired (autoimmune) hemolytic anemia. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis. Regional enteritis. 12. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement. In addition to the above indications Prednisolone Oral Solution is indicated for systemic dermatomyositis (polymyositis).",
"Description": "Prednisolone Oral Solution contains prednisolone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisolone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; soluble in methanol and in dioxane; sparingly soluble in acetone and in alcohol; slightly soluble in chloroform. The chemical name for Prednisolone is Pregna- 1,4-diene-3,20-dione,11,17,21- trihydroxy-,(11β)- (anhydrous). Prednisolone Oral Solution contains 15 mg of prednisolone in each 5 mL. Benzoic acid, 0.1% is added as a preservative. It also contains alcohol 5%, citric acid, edetate disodium, glycerin, propylene glycol, purified water, sodium saccharin, sucrose, artificial wild cherry flavor, FD and C blue #1 and red #40."
},
{
"NDCCode": "17089-291-18",
"PackageDescription": "1 BOTTLE, DROPPER in 1 BOX (17089-291-18) > 30 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "17089-0291-18",
"ProductNDC": "17089-291",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Guna-lympho",
"NonProprietaryName": "Apis Mellifera - Calendula Officinalis Flower - Centella Asiatica - Dodecahydroxycyclohexane Dihydrate - Equisetum Hyemale - Fumaric Acid - Goldenseal - Graphite - Juglans Regia Leaf - Levothyroxine - Magnesium Phosphate - Malic Acid - Myosotis Arvensis - Phytolacca Americana Root - Sarsaparilla - Sodium Diethyl Oxalacetate - Sodium Pyruvate - Sus Scrofa Capillary Tissue - Sus Scrofa Small Intestine Mucosa Lymph Follicle - Sus Scrofa Vein - Taraxacum Officinale -",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "ORAL",
"StartMarketingDate": "20060523",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Guna spa",
"SubstanceName": "APIS MELLIFERA; CALENDULA OFFICINALIS FLOWER; SUS SCROFA CAPILLARY TISSUE; MALIC ACID; EQUISETUM HYEMALE; FUMARIC ACID; GRAPHITE; GOLDENSEAL; CENTELLA ASIATICA; JUGLANS REGIA LEAF; LEVOTHYROXINE; SUS SCROFA SMALL INTESTINE MUCOSA LYMPH FOLLICLE; MAGNESIUM PHOSPHATE, TRIBASIC, PENTAHYDRATE; MYOSOTIS ARVENSIS; SODIUM DIETHYL OXALACETATE; SODIUM PYRUVATE; PHYTOLACCA AMERICANA ROOT; SARSAPARILLA; TARAXACUM OFFICINALE; DODECAHYDROXYCYCLOHEXANE DIHYDRATE; SUS SCROFA VEIN",
"StrengthNumber": "8; 1; 6; 6; 3; 6; 30; 1; 1; 3; 12; 6; 6; 3; 6; 6; 3; 3; 1; 6; 6",
"StrengthUnit": "[hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL",
"Pharm_Classes": "Allergens [CS], Bee Venoms [CS], Calculi Dissolution Agent [EPC], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Standardized Insect Venom Allergenic Extract [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE], Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2022-11-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181221",
"SamplePackage": "N",
"IndicationAndUsage": "Take 15 minutes before meals."
},
{
"NDCCode": "21695-291-01",
"PackageDescription": "1 INHALER in 1 CARTON (21695-291-01) > 60 AEROSOL, POWDER in 1 INHALER",
"NDC11Code": "21695-0291-01",
"ProductNDC": "21695-291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pulmicort",
"ProprietaryNameSuffix": "Flexhaler",
"NonProprietaryName": "Budesonide",
"DosageFormName": "AEROSOL, POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20100730",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021949",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": "90",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "PULMICORT FLEXHALER is a corticosteroid indicated for:. Maintenance treatment of asthma as prophylactic therapy in adult and pediatric patients six years of age or older. (1.1). Important Limitations:. Not indicated for the relief of acute bronchospasm. (1.1).",
"Description": "Budesonide, the active component of PULMICORT FLEXHALER, is a corticosteroid designated chemically as (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. PULMICORT FLEXHALER is an inhalation-driven multi-dose dry powder inhaler containing a formulation of 1 mg per actuation of micronized budesonide and micronized lactose monohydrate which contains trace levels of milk proteins [see Contraindications (4) andPost-marketing Experience (6.2)]. Each actuation of PULMICORT FLEXHALER 180 mcg delivers 160 mcg budesonide from the mouthpiece and each actuation of PULMICORT FLEXHALER 90 mcg delivers 80 mcg budesonide from the mouthpiece (based on in vitro testing at 60 L/min for 2 sec). Each PULMICORT FLEXHALER 180 mcg contains 120 actuations and each PULMICORT FLEXHALER 90 mcg contains 60 actuations. In vitro testing has shown that the dose delivery for PULMICORT FLEXHALER is dependent on airflow through the device, as evidenced by a decrease in the fine particle dose at a flow rate of 30 L/min to a value that is approximately 40-50% of that produced at 60 L/min. At a flow rate of 40 L/min, the fine particle dose is approximately 70% of that produced at 60 L/min. Patient factors such as inspiratory flow rates will also affect the dose delivered to the lungs of patients in actual use [see Patient Information and Instructions for Use (17.11)]. In asthmatic children age 6 to 17 (N=516, FEV1 2.29 [0.97– 4.28]) peak inspiratory flow (PIF) through PULMICORT FLEXHALER was 72.5 [19.1 – 103.6] L/min). Inspiratory flows were not measured in the adult pivotal study. Patients should be carefully instructed on the use of this drug product to assure optimal dose delivery."
},
{
"NDCCode": "24510-291-01",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (24510-291-01) / 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "24510-0291-01",
"ProductNDC": "24510-291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nucynta",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Tapentadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190419",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA200533",
"LabelerName": "Collegium Pharmaceutical, Inc.",
"SubstanceName": "TAPENTADOL HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190419",
"SamplePackage": "N",
"IndicationAndUsage": "NUCYNTA ER (tapentadol) is indicated for the management of: 1 Severe and persistent pain in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids.",
"Description": "NUCYNTA ER (tapentadol) is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NO∙HCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets)."
},
{
"NDCCode": "24510-291-60",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (24510-291-60) ",
"NDC11Code": "24510-0291-60",
"ProductNDC": "24510-291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nucynta",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Tapentadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190419",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA200533",
"LabelerName": "Collegium Pharmaceutical, Inc.",
"SubstanceName": "TAPENTADOL HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190419",
"SamplePackage": "N",
"IndicationAndUsage": "NUCYNTA ER (tapentadol) is indicated for the management of: 1 Severe and persistent pain in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids.",
"Description": "NUCYNTA ER (tapentadol) is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NO∙HCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets)."
},
{
"NDCCode": "27241-291-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (27241-291-01) ",
"NDC11Code": "27241-0291-01",
"ProductNDC": "27241-291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Terazosin",
"NonProprietaryName": "Terazosin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219482",
"LabelerName": "Ajanta Pharma USA Inc.",
"SubstanceName": "TERAZOSIN HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250512",
"SamplePackage": "N",
"IndicationAndUsage": "Terazosin capsules are indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH). There is a rapid response, with approximately 70% of patients experiencing an increase in urinary flow and improvement in symptoms of BPH when treated with terazosin capsules. The long-term effects of terazosin capsules on the incidence of surgery, acute urinary obstruction or other complications of BPH are yet to be determined. Terazosin capsules are also indicated for the treatment of hypertension. Terazosin capsules can be used alone or in combination with other antihypertensive agents such as diuretics or beta-adrenergic blocking agents.",
"Description": "Terazosin hydrochloride USP, an alpha-1-selective adrenoceptor blocking agent, is a quinazoline derivative represented by the following chemical name, molecular formula and structural formula. Piperazine, 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-[(tetrahydro-2-furanyl)carbonyl]-, monohydrochloride, dihydrate. C19H25N5O4 HCl 2H2O. Terazosin hydrochloride, USP is a white to pale yellow, crystalline powder. Soluble in methanol, sparingly soluble in water, slightly soluble in alcohol and in 0.1 N hydrochloric acid, very slightly soluble in isotonic saline solution and in chloroform and practically insoluble in acetone and in hexanes and has a molecular weight of 459.93. Each capsule, for oral administration, contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and pregelatinized starch. The gelatin capsule contains gelatin, sodium lauryl sulfate, and titanium dioxide. The 1 mg shell also contains ferric oxide black; the 2 mg capsule shell also contains D&C Yellow-10; the 5 mg capsule shell also contains D&C Yellow-10, D&C Red-28 and FD&C Red-40; the 10 mg capsule shell also contains D&C Yellow-10 and FD&C Green-3. Imprinting ink contains shellac, propylene glycol, butyl alcohol, potassium hydroxide and black iron oxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "27241-291-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (27241-291-10) ",
"NDC11Code": "27241-0291-10",
"ProductNDC": "27241-291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Terazosin",
"NonProprietaryName": "Terazosin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219482",
"LabelerName": "Ajanta Pharma USA Inc.",
"SubstanceName": "TERAZOSIN HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250512",
"SamplePackage": "N",
"IndicationAndUsage": "Terazosin capsules are indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH). There is a rapid response, with approximately 70% of patients experiencing an increase in urinary flow and improvement in symptoms of BPH when treated with terazosin capsules. The long-term effects of terazosin capsules on the incidence of surgery, acute urinary obstruction or other complications of BPH are yet to be determined. Terazosin capsules are also indicated for the treatment of hypertension. Terazosin capsules can be used alone or in combination with other antihypertensive agents such as diuretics or beta-adrenergic blocking agents.",
"Description": "Terazosin hydrochloride USP, an alpha-1-selective adrenoceptor blocking agent, is a quinazoline derivative represented by the following chemical name, molecular formula and structural formula. Piperazine, 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-[(tetrahydro-2-furanyl)carbonyl]-, monohydrochloride, dihydrate. C19H25N5O4 HCl 2H2O. Terazosin hydrochloride, USP is a white to pale yellow, crystalline powder. Soluble in methanol, sparingly soluble in water, slightly soluble in alcohol and in 0.1 N hydrochloric acid, very slightly soluble in isotonic saline solution and in chloroform and practically insoluble in acetone and in hexanes and has a molecular weight of 459.93. Each capsule, for oral administration, contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and pregelatinized starch. The gelatin capsule contains gelatin, sodium lauryl sulfate, and titanium dioxide. The 1 mg shell also contains ferric oxide black; the 2 mg capsule shell also contains D&C Yellow-10; the 5 mg capsule shell also contains D&C Yellow-10, D&C Red-28 and FD&C Red-40; the 10 mg capsule shell also contains D&C Yellow-10 and FD&C Green-3. Imprinting ink contains shellac, propylene glycol, butyl alcohol, potassium hydroxide and black iron oxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "31722-291-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (31722-291-01) ",
"NDC11Code": "31722-0291-01",
"ProductNDC": "31722-291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215259",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": ".137",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230118",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test."
},
{
"NDCCode": "31722-291-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (31722-291-10) ",
"NDC11Code": "31722-0291-10",
"ProductNDC": "31722-291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215259",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": ".137",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230118",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test."
},
{
"NDCCode": "31722-291-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (31722-291-30) ",
"NDC11Code": "31722-0291-30",
"ProductNDC": "31722-291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215259",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": ".137",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230118",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test."
},
{
"NDCCode": "31722-291-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (31722-291-90) ",
"NDC11Code": "31722-0291-90",
"ProductNDC": "31722-291",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215259",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": ".137",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230118",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.",
"Description": "Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test."
},
{
"NDCCode": "36800-291-40",
"PackageDescription": "355 mL in 1 BOTTLE (36800-291-40) ",
"NDC11Code": "36800-0291-40",
"ProductNDC": "36800-291",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Topcare Nite Time Cold And Flu",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hbr, Doxylamine Succinate, Phenylephrine Hcl",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20150804",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Topco Associates LLC",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "650; 20; 12.5; 10",
"StrengthUnit": "mg/30mL; mg/30mL; mg/30mL; mg/30mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], Antihistamine [EPC], Histamine Receptor Antagonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150804",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves common cold/flu symptoms: 1 nasal congestion, 2 sinus congestion and pressure, 3 minor aches and pains, 4 headache, 5 fever, 6 sore throat, 7 runny nose and sneezing, 8 cough due to minor throat and bronchial irritation, 9 cough to help you sleep, 10 reduces swelling of nasal passages, 11 promotes nasal and/or sinus drainage, 12 temporarily restores freer breathing through the nose."
},
{
"NDCCode": "37808-291-08",
"PackageDescription": "236 mL in 1 BOTTLE (37808-291-08)",
"NDC11Code": "37808-0291-08",
"ProductNDC": "37808-291",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cactus Flower And Mango Antibacterial Deep Cleansing Hand Sp",
"NonProprietaryName": "Triclosan",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20101230",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "HEB",
"SubstanceName": "TRICLOSAN",
"StrengthNumber": ".3",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "TO HELP REDUCE BACTERIA ON THE SKIN."
},
{
"NDCCode": "41167-0291-0",
"PackageDescription": "354 mL in 1 BOTTLE (41167-0291-0) ",
"NDC11Code": "41167-0291-00",
"ProductNDC": "41167-0291",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dulcolax",
"ProprietaryNameSuffix": "Liquid",
"NonProprietaryName": "Magnesium Hydroxide",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20190301",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Chattem, Inc.",
"SubstanceName": "MAGNESIUM HYDROXIDE",
"StrengthNumber": "1200",
"StrengthUnit": "mg/15mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190301",
"SamplePackage": "N",
"IndicationAndUsage": "● for relief of occasional constipation and irregularity. ● this product generally produces bowel movement in ½ to 6 hours."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0291-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0291-3)</PackageDescription>
<NDC11Code>49288-0291-03</NDC11Code>
<ProductNDC>49288-0291</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Lobster</ProprietaryName>
<NonProprietaryName>Lobster</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>LOBSTER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0291-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0291-1)</PackageDescription>
<NDC11Code>49288-0291-01</NDC11Code>
<ProductNDC>49288-0291</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Lobster</ProprietaryName>
<NonProprietaryName>Lobster</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>LOBSTER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0291-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0291-2)</PackageDescription>
<NDC11Code>49288-0291-02</NDC11Code>
<ProductNDC>49288-0291</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Lobster</ProprietaryName>
<NonProprietaryName>Lobster</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>LOBSTER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0291-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0291-4)</PackageDescription>
<NDC11Code>49288-0291-04</NDC11Code>
<ProductNDC>49288-0291</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Lobster</ProprietaryName>
<NonProprietaryName>Lobster</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>LOBSTER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0291-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0291-5)</PackageDescription>
<NDC11Code>49288-0291-05</NDC11Code>
<ProductNDC>49288-0291</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Lobster</ProprietaryName>
<NonProprietaryName>Lobster</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>LOBSTER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Shellfish Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>11822-0291-3</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (11822-0291-3) > 200 TABLET, FILM COATED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>11822-0291-03</NDC11Code>
<ProductNDC>11822-0291</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075010</ApplicationNumber>
<LabelerName>Rite Aid Corporation</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>15631-0291-3</NDCCode>
<PackageDescription>750 PELLET in 1 PACKAGE (15631-0291-3) </PackageDescription>
<NDC11Code>15631-0291-03</NDC11Code>
<ProductNDC>15631-0291</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mercurius Corrosivus</ProprietaryName>
<NonProprietaryName>Mercurius Corrosivus</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150909</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>MERCURIC CHLORIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37662-0291-3</NDCCode>
<PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (37662-0291-3) </PackageDescription>
<NDC11Code>37662-0291-03</NDC11Code>
<ProductNDC>37662-0291</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cicuta Virosa</ProprietaryName>
<NonProprietaryName>Cicuta Virosa</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220602</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>CICUTA VIROSA ROOT</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>70518-0291-0</NDCCode>
<PackageDescription>3 TABLET, ORALLY DISINTEGRATING in 1 CARTON (70518-0291-0) </PackageDescription>
<NDC11Code>70518-0291-00</NDC11Code>
<ProductNDC>70518-0291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170308</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078050</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>ONDANSETRON</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA],Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-03-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170308</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-0291-3</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE (71335-0291-3) </PackageDescription>
<NDC11Code>71335-0291-03</NDC11Code>
<ProductNDC>71335-0291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160620</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205119</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220628</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets USP, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is. Pantoprazole sodium, USP sesquihydrate is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium, USP sesquihydrate is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium, USP sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: ammonium hydroxide, crospovidone, hydroxyl propyl cellulose, hypromellose, iron oxide black, iron oxide yellow, mannitol, methacrylic acid copolymer dispersion, polyethylene glycol, polyvinyl alcohol, povidone, propylene glycol, shellac, sodium carbonate, sodium hydroxide, sodium stearyl fumarate, talc, titanium dioxide and triethyl citrate. Pantoprazole sodium delayed-release tablets, USP (40 mg and 20 mg) complies with USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>71335-0291-9</NDCCode>
<PackageDescription>3 TABLET, DELAYED RELEASE in 1 BOTTLE (71335-0291-9) </PackageDescription>
<NDC11Code>71335-0291-09</NDC11Code>
<ProductNDC>71335-0291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160620</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205119</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220628</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets USP, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is. Pantoprazole sodium, USP sesquihydrate is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium, USP sesquihydrate is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium, USP sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively). Pantoprazole sodium delayed-release tablets, USP contains the following inactive ingredients: ammonium hydroxide, crospovidone, hydroxyl propyl cellulose, hypromellose, iron oxide black, iron oxide yellow, mannitol, methacrylic acid copolymer dispersion, polyethylene glycol, polyvinyl alcohol, povidone, propylene glycol, shellac, sodium carbonate, sodium hydroxide, sodium stearyl fumarate, talc, titanium dioxide and triethyl citrate. Pantoprazole sodium delayed-release tablets, USP (40 mg and 20 mg) complies with USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>80425-0291-3</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (80425-0291-3) </PackageDescription>
<NDC11Code>80425-0291-03</NDC11Code>
<ProductNDC>80425-0291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carisoprodol</ProprietaryName>
<NonProprietaryName>Carisoprodol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203374</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>CARISOPRODOL</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carisoprodol is indicated for the relief of discomfort associated with acute, painful musculoskeletal conditions in adults. Limitation of Use. Carisoprodol should only be used for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use has not been established and because acute, painful musculoskeletal conditions are generally of short duration. [ see DOSAGE AND ADMINISTRATION (2)].</IndicationAndUsage>
<Description>Carisoprodol tablets, USP are available as 350 mg round, white tablets. Carisoprodol, USP is a white, crystalline powder, having a mild, characteristic odor. It is very slightly soluble in water; freely soluble in alcohol, in chloroform, and in acetone; and its solubility is practically independent of pH. Carisoprodol is present as a racemic mixture. Chemically, carisoprodol is (±)-2-Methyl-2-propyl-1,3-propanediol carbamate isopropylcarbamate and the molecular formula is C 12H 24N 2O 4, with a molecular weight of 260.33. The structural formula is. Other ingredients in the Carisoprodol tablets USP, 350 mg include microcrystalline cellulose, lactose monohydrate, pregelatinized starch (maize), croscarmellose sodium, povidone, silicon dioxide and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>0069-0291-01</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0069-0291-01) / .5 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00069-0291-01</NDC11Code>
<ProductNDC>0069-0291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nivestym</ProprietaryName>
<NonProprietaryName>Filgrastim-aafi</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20180924</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761080</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>FILGRASTIM</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>ug/.5mL</StrengthUnit>
<Pharm_Classes>Granulocyte Colony-Stimulating Factor [CS], Increased Myeloid Cell Production [PE], Leukocyte Growth Factor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180924</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NIVESTYM is a leukocyte growth factor indicated to: 1 Decrease the incidence of infection‚ as manifested by febrile neutropenia‚ in patients with nonmyeloid malignancies receiving myelosuppressive anti-cancer drugs associated with a significant incidence of severe neutropenia with fever. (1.1), 2 Reduce the time to neutrophil recovery and the duration of fever, following induction or consolidation chemotherapy treatment of patients with acute myeloid leukemia (AML). (1.2), 3 Reduce the duration of neutropenia and neutropenia-related clinical sequelae‚ e.g.‚ febrile neutropenia, in patients with nonmyeloid malignancies undergoing myeloablative chemotherapy followed by bone marrow transplantation (BMT). (1.3), 4 Mobilize autologous hematopoietic progenitor cells into the peripheral blood for collection by leukapheresis. (1.4), 5 Reduce the incidence and duration of sequelae of severe neutropenia (e.g.‚ fever‚ infections‚ oropharyngeal ulcers) in symptomatic patients with congenital neutropenia‚ cyclic neutropenia‚ or idiopathic neutropenia. (1.5).</IndicationAndUsage>
<Description>Filgrastim-aafi is a 175 amino acid human granulocyte colony-stimulating factor (G-CSF) manufactured by recombinant DNA technology. NIVESTYM is produced by Escherichia coli (E coli) bacteria into which has been inserted the human granulocyte colony-stimulating factor gene. NIVESTYM has a molecular weight of 18‚799 daltons. The protein has an amino acid sequence that is identical to the natural sequence predicted from human DNA sequence analysis‚ except for the addition of an N-terminal methionine necessary for expression in E coli. Because NIVESTYM is produced in E coli‚ the product is non-glycosylated and thus differs from G-CSF isolated from a human cell. NIVESTYM is a sterile‚ clear‚ colorless‚ preservative-free liquid containing filgrastim-aafi injection for subcutaneous or intravenous use. The product is available in single-dose vials for subcutaneous or intravenous use and prefilled syringes for subcutaneous use. The single-dose vials contain either 300 mcg/mL or 480 mcg/1.6 mL of filgrastim-aafi. The single-dose prefilled syringes contain either 300 mcg/0.5 mL or 480 mcg/0.8 mL of filgrastim-aafi. The final pH range of the NIVESTYM drug product solution is 3.8 to 4.3. See Table 4 below for product composition of each single-dose vial or prefilled syringe.</Description>
</NDC>
<NDC>
<NDCCode>0069-0291-10</NDCCode>
<PackageDescription>10 CARTON in 1 CARTON (0069-0291-10) / 1 SYRINGE in 1 CARTON (0069-0291-01) / .5 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00069-0291-10</NDC11Code>
<ProductNDC>0069-0291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nivestym</ProprietaryName>
<NonProprietaryName>Filgrastim-aafi</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20180924</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761080</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<SubstanceName>FILGRASTIM</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>ug/.5mL</StrengthUnit>
<Pharm_Classes>Granulocyte Colony-Stimulating Factor [CS], Increased Myeloid Cell Production [PE], Leukocyte Growth Factor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180924</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NIVESTYM is a leukocyte growth factor indicated to: 1 Decrease the incidence of infection‚ as manifested by febrile neutropenia‚ in patients with nonmyeloid malignancies receiving myelosuppressive anti-cancer drugs associated with a significant incidence of severe neutropenia with fever. (1.1), 2 Reduce the time to neutrophil recovery and the duration of fever, following induction or consolidation chemotherapy treatment of patients with acute myeloid leukemia (AML). (1.2), 3 Reduce the duration of neutropenia and neutropenia-related clinical sequelae‚ e.g.‚ febrile neutropenia, in patients with nonmyeloid malignancies undergoing myeloablative chemotherapy followed by bone marrow transplantation (BMT). (1.3), 4 Mobilize autologous hematopoietic progenitor cells into the peripheral blood for collection by leukapheresis. (1.4), 5 Reduce the incidence and duration of sequelae of severe neutropenia (e.g.‚ fever‚ infections‚ oropharyngeal ulcers) in symptomatic patients with congenital neutropenia‚ cyclic neutropenia‚ or idiopathic neutropenia. (1.5).</IndicationAndUsage>
<Description>Filgrastim-aafi is a 175 amino acid human granulocyte colony-stimulating factor (G-CSF) manufactured by recombinant DNA technology. NIVESTYM is produced by Escherichia coli (E coli) bacteria into which has been inserted the human granulocyte colony-stimulating factor gene. NIVESTYM has a molecular weight of 18‚799 daltons. The protein has an amino acid sequence that is identical to the natural sequence predicted from human DNA sequence analysis‚ except for the addition of an N-terminal methionine necessary for expression in E coli. Because NIVESTYM is produced in E coli‚ the product is non-glycosylated and thus differs from G-CSF isolated from a human cell. NIVESTYM is a sterile‚ clear‚ colorless‚ preservative-free liquid containing filgrastim-aafi injection for subcutaneous or intravenous use. The product is available in single-dose vials for subcutaneous or intravenous use and prefilled syringes for subcutaneous use. The single-dose vials contain either 300 mcg/mL or 480 mcg/1.6 mL of filgrastim-aafi. The single-dose prefilled syringes contain either 300 mcg/0.5 mL or 480 mcg/0.8 mL of filgrastim-aafi. The final pH range of the NIVESTYM drug product solution is 3.8 to 4.3. See Table 4 below for product composition of each single-dose vial or prefilled syringe.</Description>
</NDC>
<NDC>
<NDCCode>14783-291-01</NDCCode>
<PackageDescription>30 mL in 1 BOX (14783-291-01) </PackageDescription>
<NDC11Code>14783-0291-01</NDC11Code>
<ProductNDC>14783-291</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lbel Effet Parfait Signs Of Age Appearance Minimizer Foundation Spf 20 Fm Claire 3</ProprietaryName>
<NonProprietaryName>Octinoxate, Titanium Dioxide</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210730</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura International LTD</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>7; 2.44</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Stop use and ask a doctor if rash occurs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>15127-291-26</NDCCode>
<PackageDescription>118 mL in 1 BOTTLE, PLASTIC (15127-291-26) </PackageDescription>
<NDC11Code>15127-0291-26</NDC11Code>
<ProductNDC>15127-291</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Select Brand Anti-nausea</ProprietaryName>
<NonProprietaryName>Phosphorated Carbohydrate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>L&R Distributors</LabelerName>
<SubstanceName>PHOSPHORIC ACID; SUCROSE</SubstanceName>
<StrengthNumber>21.5; 3.74</StrengthNumber>
<StrengthUnit>mg/5mL; g/5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For relief of nausea due to upset stomach from intestinal flu, stomach flu, and food or drink indiscretions.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16590-291-37</NDCCode>
<PackageDescription>240 mL in 1 BOTTLE (16590-291-37)</PackageDescription>
<NDC11Code>16590-0291-37</NDC11Code>
<ProductNDC>16590-291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisolone</ProprietaryName>
<NonProprietaryName>Prednisolone</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040401</ApplicationNumber>
<LabelerName>Stat Rx USA</LabelerName>
<SubstanceName>PREDNISOLONE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prednisolone Oral Solution is indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Psoriatic arthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Ankylosing spondylitis. Acute and subacute bursitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus. Bullous dermatitis herpetiformis. Severe erythema multiforme. (Stevens-Johnson syndrome). Exfoliative dermatitis. Mycosis fungoides. Severe psoriasis. Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers. Herpes zoster ophthalmicus. Anterior segment inflammation. Diffuse posterior uveitis and choroiditis. Sympathetic ophthalmia. Allergic conjunctivitis. Keratitis. Chorioretinitis. Optic neuritis. Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis. Loeffler’s syndrome not manageable by other means. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults. Secondary thrombocytopenia in adults. Acquired (autoimmune) hemolytic anemia. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis. Regional enteritis. 12. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement. In addition to the above indications Prednisolone Oral Solution is indicated for systemic dermatomyositis (polymyositis).</IndicationAndUsage>
<Description>Prednisolone Oral Solution contains prednisolone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisolone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; soluble in methanol and in dioxane; sparingly soluble in acetone and in alcohol; slightly soluble in chloroform. The chemical name for Prednisolone is Pregna- 1,4-diene-3,20-dione,11,17,21- trihydroxy-,(11β)- (anhydrous). Prednisolone Oral Solution contains 15 mg of prednisolone in each 5 mL. Benzoic acid, 0.1% is added as a preservative. It also contains alcohol 5%, citric acid, edetate disodium, glycerin, propylene glycol, purified water, sodium saccharin, sucrose, artificial wild cherry flavor, FD and C blue #1 and red #40.</Description>
</NDC>
<NDC>
<NDCCode>17089-291-18</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 BOX (17089-291-18) > 30 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>17089-0291-18</NDC11Code>
<ProductNDC>17089-291</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Guna-lympho</ProprietaryName>
<NonProprietaryName>Apis Mellifera - Calendula Officinalis Flower - Centella Asiatica - Dodecahydroxycyclohexane Dihydrate - Equisetum Hyemale - Fumaric Acid - Goldenseal - Graphite - Juglans Regia Leaf - Levothyroxine - Magnesium Phosphate - Malic Acid - Myosotis Arvensis - Phytolacca Americana Root - Sarsaparilla - Sodium Diethyl Oxalacetate - Sodium Pyruvate - Sus Scrofa Capillary Tissue - Sus Scrofa Small Intestine Mucosa Lymph Follicle - Sus Scrofa Vein - Taraxacum Officinale -</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060523</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Guna spa</LabelerName>
<SubstanceName>APIS MELLIFERA; CALENDULA OFFICINALIS FLOWER; SUS SCROFA CAPILLARY TISSUE; MALIC ACID; EQUISETUM HYEMALE; FUMARIC ACID; GRAPHITE; GOLDENSEAL; CENTELLA ASIATICA; JUGLANS REGIA LEAF; LEVOTHYROXINE; SUS SCROFA SMALL INTESTINE MUCOSA LYMPH FOLLICLE; MAGNESIUM PHOSPHATE, TRIBASIC, PENTAHYDRATE; MYOSOTIS ARVENSIS; SODIUM DIETHYL OXALACETATE; SODIUM PYRUVATE; PHYTOLACCA AMERICANA ROOT; SARSAPARILLA; TARAXACUM OFFICINALE; DODECAHYDROXYCYCLOHEXANE DIHYDRATE; SUS SCROFA VEIN</SubstanceName>
<StrengthNumber>8; 1; 6; 6; 3; 6; 30; 1; 1; 3; 12; 6; 6; 3; 6; 6; 3; 3; 1; 6; 6</StrengthNumber>
<StrengthUnit>[hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL; [hp_X]/30mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Bee Venoms [CS], Calculi Dissolution Agent [EPC], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Standardized Insect Venom Allergenic Extract [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE], Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Take 15 minutes before meals.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>21695-291-01</NDCCode>
<PackageDescription>1 INHALER in 1 CARTON (21695-291-01) > 60 AEROSOL, POWDER in 1 INHALER</PackageDescription>
<NDC11Code>21695-0291-01</NDC11Code>
<ProductNDC>21695-291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pulmicort</ProprietaryName>
<ProprietaryNameSuffix>Flexhaler</ProprietaryNameSuffix>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>AEROSOL, POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20100730</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021949</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>PULMICORT FLEXHALER is a corticosteroid indicated for:. Maintenance treatment of asthma as prophylactic therapy in adult and pediatric patients six years of age or older. (1.1). Important Limitations:. Not indicated for the relief of acute bronchospasm. (1.1).</IndicationAndUsage>
<Description>Budesonide, the active component of PULMICORT FLEXHALER, is a corticosteroid designated chemically as (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, tasteless, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 7.4 is 1.6 x 103. PULMICORT FLEXHALER is an inhalation-driven multi-dose dry powder inhaler containing a formulation of 1 mg per actuation of micronized budesonide and micronized lactose monohydrate which contains trace levels of milk proteins [see Contraindications (4) andPost-marketing Experience (6.2)]. Each actuation of PULMICORT FLEXHALER 180 mcg delivers 160 mcg budesonide from the mouthpiece and each actuation of PULMICORT FLEXHALER 90 mcg delivers 80 mcg budesonide from the mouthpiece (based on in vitro testing at 60 L/min for 2 sec). Each PULMICORT FLEXHALER 180 mcg contains 120 actuations and each PULMICORT FLEXHALER 90 mcg contains 60 actuations. In vitro testing has shown that the dose delivery for PULMICORT FLEXHALER is dependent on airflow through the device, as evidenced by a decrease in the fine particle dose at a flow rate of 30 L/min to a value that is approximately 40-50% of that produced at 60 L/min. At a flow rate of 40 L/min, the fine particle dose is approximately 70% of that produced at 60 L/min. Patient factors such as inspiratory flow rates will also affect the dose delivered to the lungs of patients in actual use [see Patient Information and Instructions for Use (17.11)]. In asthmatic children age 6 to 17 (N=516, FEV1 2.29 [0.97– 4.28]) peak inspiratory flow (PIF) through PULMICORT FLEXHALER was 72.5 [19.1 – 103.6] L/min). Inspiratory flows were not measured in the adult pivotal study. Patients should be carefully instructed on the use of this drug product to assure optimal dose delivery.</Description>
</NDC>
<NDC>
<NDCCode>24510-291-01</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (24510-291-01) / 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>24510-0291-01</NDC11Code>
<ProductNDC>24510-291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nucynta</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Tapentadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190419</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA200533</ApplicationNumber>
<LabelerName>Collegium Pharmaceutical, Inc.</LabelerName>
<SubstanceName>TAPENTADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NUCYNTA ER (tapentadol) is indicated for the management of: 1 Severe and persistent pain in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids.</IndicationAndUsage>
<Description>NUCYNTA ER (tapentadol) is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NO∙HCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>24510-291-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (24510-291-60) </PackageDescription>
<NDC11Code>24510-0291-60</NDC11Code>
<ProductNDC>24510-291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nucynta</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Tapentadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190419</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA200533</ApplicationNumber>
<LabelerName>Collegium Pharmaceutical, Inc.</LabelerName>
<SubstanceName>TAPENTADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NUCYNTA ER (tapentadol) is indicated for the management of: 1 Severe and persistent pain in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids., 2 Severe and persistent neuropathic pain associated with diabetic peripheral neuropathy (DPN) in adults that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids.</IndicationAndUsage>
<Description>NUCYNTA ER (tapentadol) is an opioid agonist, supplied in extended-release film-coated tablets for oral administration, containing 58.24, 116.48, 174.72, 232.96, and 291.20 mg of tapentadol hydrochloride in each tablet strength, corresponding to 50, 100, 150, 200, and 250 mg of tapentadol free-base, respectively. The chemical name is 3-[(1R,2R)-3-(dimethylamino)-1-ethyl-2-methylpropyl]phenol monohydrochloride. The structural formula is. The molecular weight of tapentadol HCl is 257.80, and the molecular formula is C14H23NO∙HCl. The n-octanol: water partition coefficient log P value is 2.89. The pKa values are 9.36 and 10.45. In addition to the active ingredient tapentadol HCl, tablets also contain the following inactive ingredients: alpha-tocopherol (vitamin E), hypromellose, polyethylene glycol, and polyethylene oxide. The film coating is comprised of polyvinyl alcohol, polyethylene glycol, talc, titanium dioxide, and the colorant FD&C Blue #2 aluminum lake is used for 100, 150, 200, and 250 mg strengths; and additionally, yellow iron oxide is used in 150 mg tablets. Printing inks contain shellac glaze and propylene glycol for all strengths, and black iron oxide (50, 100, 150 and 200 mg tablets) or titanium dioxide (250 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>27241-291-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (27241-291-01) </PackageDescription>
<NDC11Code>27241-0291-01</NDC11Code>
<ProductNDC>27241-291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Terazosin</ProprietaryName>
<NonProprietaryName>Terazosin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219482</ApplicationNumber>
<LabelerName>Ajanta Pharma USA Inc.</LabelerName>
<SubstanceName>TERAZOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Terazosin capsules are indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH). There is a rapid response, with approximately 70% of patients experiencing an increase in urinary flow and improvement in symptoms of BPH when treated with terazosin capsules. The long-term effects of terazosin capsules on the incidence of surgery, acute urinary obstruction or other complications of BPH are yet to be determined. Terazosin capsules are also indicated for the treatment of hypertension. Terazosin capsules can be used alone or in combination with other antihypertensive agents such as diuretics or beta-adrenergic blocking agents.</IndicationAndUsage>
<Description>Terazosin hydrochloride USP, an alpha-1-selective adrenoceptor blocking agent, is a quinazoline derivative represented by the following chemical name, molecular formula and structural formula. Piperazine, 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-[(tetrahydro-2-furanyl)carbonyl]-, monohydrochloride, dihydrate. C19H25N5O4 HCl 2H2O. Terazosin hydrochloride, USP is a white to pale yellow, crystalline powder. Soluble in methanol, sparingly soluble in water, slightly soluble in alcohol and in 0.1 N hydrochloric acid, very slightly soluble in isotonic saline solution and in chloroform and practically insoluble in acetone and in hexanes and has a molecular weight of 459.93. Each capsule, for oral administration, contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and pregelatinized starch. The gelatin capsule contains gelatin, sodium lauryl sulfate, and titanium dioxide. The 1 mg shell also contains ferric oxide black; the 2 mg capsule shell also contains D&C Yellow-10; the 5 mg capsule shell also contains D&C Yellow-10, D&C Red-28 and FD&C Red-40; the 10 mg capsule shell also contains D&C Yellow-10 and FD&C Green-3. Imprinting ink contains shellac, propylene glycol, butyl alcohol, potassium hydroxide and black iron oxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>27241-291-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (27241-291-10) </PackageDescription>
<NDC11Code>27241-0291-10</NDC11Code>
<ProductNDC>27241-291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Terazosin</ProprietaryName>
<NonProprietaryName>Terazosin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219482</ApplicationNumber>
<LabelerName>Ajanta Pharma USA Inc.</LabelerName>
<SubstanceName>TERAZOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Terazosin capsules are indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH). There is a rapid response, with approximately 70% of patients experiencing an increase in urinary flow and improvement in symptoms of BPH when treated with terazosin capsules. The long-term effects of terazosin capsules on the incidence of surgery, acute urinary obstruction or other complications of BPH are yet to be determined. Terazosin capsules are also indicated for the treatment of hypertension. Terazosin capsules can be used alone or in combination with other antihypertensive agents such as diuretics or beta-adrenergic blocking agents.</IndicationAndUsage>
<Description>Terazosin hydrochloride USP, an alpha-1-selective adrenoceptor blocking agent, is a quinazoline derivative represented by the following chemical name, molecular formula and structural formula. Piperazine, 1-(4-amino-6,7-dimethoxy-2-quinazolinyl)-4-[(tetrahydro-2-furanyl)carbonyl]-, monohydrochloride, dihydrate. C19H25N5O4 HCl 2H2O. Terazosin hydrochloride, USP is a white to pale yellow, crystalline powder. Soluble in methanol, sparingly soluble in water, slightly soluble in alcohol and in 0.1 N hydrochloric acid, very slightly soluble in isotonic saline solution and in chloroform and practically insoluble in acetone and in hexanes and has a molecular weight of 459.93. Each capsule, for oral administration, contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and pregelatinized starch. The gelatin capsule contains gelatin, sodium lauryl sulfate, and titanium dioxide. The 1 mg shell also contains ferric oxide black; the 2 mg capsule shell also contains D&C Yellow-10; the 5 mg capsule shell also contains D&C Yellow-10, D&C Red-28 and FD&C Red-40; the 10 mg capsule shell also contains D&C Yellow-10 and FD&C Green-3. Imprinting ink contains shellac, propylene glycol, butyl alcohol, potassium hydroxide and black iron oxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>31722-291-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (31722-291-01) </PackageDescription>
<NDC11Code>31722-0291-01</NDC11Code>
<ProductNDC>31722-291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215259</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>.137</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test.</Description>
</NDC>
<NDC>
<NDCCode>31722-291-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (31722-291-10) </PackageDescription>
<NDC11Code>31722-0291-10</NDC11Code>
<ProductNDC>31722-291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215259</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>.137</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test.</Description>
</NDC>
<NDC>
<NDCCode>31722-291-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (31722-291-30) </PackageDescription>
<NDC11Code>31722-0291-30</NDC11Code>
<ProductNDC>31722-291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215259</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>.137</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test.</Description>
</NDC>
<NDC>
<NDCCode>31722-291-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (31722-291-90) </PackageDescription>
<NDC11Code>31722-0291-90</NDC11Code>
<ProductNDC>31722-291</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215259</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>.137</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. Levothyroxine sodium tablets are indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. Levothyroxine sodium tablets are indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 Levothyroxine sodium tablets are not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with levothyroxine sodium tablets may induce hyperthyroidism [see Warnings and Precautions (5.4)]. , 2 Levothyroxine sodium tablets are not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis.</IndicationAndUsage>
<Description>Levothyroxine sodium tablets, USP contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt. Synthetic T4 is identical in chemical structure to the T4 produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4NNaO4 xH2O, molecular weight of 798.86 g/mol (anhydrous), and structural formula as shown. Levothyroxine sodium tablets for oral administration are available in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each levothyroxine sodium tablet contains the inactive ingredients butylated hydroxyanisole, microcrystalline cellulose, sodium starch glycolate, povidone, colloidal silicon dioxide, magnesium stearate and color additive(s). Table 6 provides a listing of the color additives by tablet strength. FDA approved Dissolution test differs from the USP dissolution test. FDA approved Assay test differs from the USP assay test.</Description>
</NDC>
<NDC>
<NDCCode>36800-291-40</NDCCode>
<PackageDescription>355 mL in 1 BOTTLE (36800-291-40) </PackageDescription>
<NDC11Code>36800-0291-40</NDC11Code>
<ProductNDC>36800-291</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Topcare Nite Time Cold And Flu</ProprietaryName>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hbr, Doxylamine Succinate, Phenylephrine Hcl</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150804</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Topco Associates LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>650; 20; 12.5; 10</StrengthNumber>
<StrengthUnit>mg/30mL; mg/30mL; mg/30mL; mg/30mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], Antihistamine [EPC], Histamine Receptor Antagonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves common cold/flu symptoms: 1 nasal congestion, 2 sinus congestion and pressure, 3 minor aches and pains, 4 headache, 5 fever, 6 sore throat, 7 runny nose and sneezing, 8 cough due to minor throat and bronchial irritation, 9 cough to help you sleep, 10 reduces swelling of nasal passages, 11 promotes nasal and/or sinus drainage, 12 temporarily restores freer breathing through the nose.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37808-291-08</NDCCode>
<PackageDescription>236 mL in 1 BOTTLE (37808-291-08)</PackageDescription>
<NDC11Code>37808-0291-08</NDC11Code>
<ProductNDC>37808-291</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cactus Flower And Mango Antibacterial Deep Cleansing Hand Sp</ProprietaryName>
<NonProprietaryName>Triclosan</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20101230</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>HEB</LabelerName>
<SubstanceName>TRICLOSAN</SubstanceName>
<StrengthNumber>.3</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>TO HELP REDUCE BACTERIA ON THE SKIN.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41167-0291-0</NDCCode>
<PackageDescription>354 mL in 1 BOTTLE (41167-0291-0) </PackageDescription>
<NDC11Code>41167-0291-00</NDC11Code>
<ProductNDC>41167-0291</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dulcolax</ProprietaryName>
<ProprietaryNameSuffix>Liquid</ProprietaryNameSuffix>
<NonProprietaryName>Magnesium Hydroxide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Chattem, Inc.</LabelerName>
<SubstanceName>MAGNESIUM HYDROXIDE</SubstanceName>
<StrengthNumber>1200</StrengthNumber>
<StrengthUnit>mg/15mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>● for relief of occasional constipation and irregularity. ● this product generally produces bowel movement in ½ to 6 hours.</IndicationAndUsage>
</NDC>
</NDCList>