{
"NDC": [
{
"NDCCode": "49288-0318-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0318-1)",
"NDC11Code": "49288-0318-01",
"ProductNDC": "49288-0318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mucor Racemosus",
"NonProprietaryName": "Mucor Racemosus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "MUCOR RACEMOSUS",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0318-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0318-2)",
"NDC11Code": "49288-0318-02",
"ProductNDC": "49288-0318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mucor Racemosus",
"NonProprietaryName": "Mucor Racemosus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "MUCOR RACEMOSUS",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0318-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0318-3)",
"NDC11Code": "49288-0318-03",
"ProductNDC": "49288-0318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mucor Racemosus",
"NonProprietaryName": "Mucor Racemosus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "MUCOR RACEMOSUS",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0318-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0318-4)",
"NDC11Code": "49288-0318-04",
"ProductNDC": "49288-0318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mucor Racemosus",
"NonProprietaryName": "Mucor Racemosus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "MUCOR RACEMOSUS",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0318-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0318-5)",
"NDC11Code": "49288-0318-05",
"ProductNDC": "49288-0318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mucor Racemosus",
"NonProprietaryName": "Mucor Racemosus",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "MUCOR RACEMOSUS",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "0025-0325-02",
"PackageDescription": "2 KIT in 1 CARTON (0025-0325-02) / 1 KIT in 1 KIT * .8 mL in 1 SYRINGE (0025-0318-01) * 1 mL in 1 PACKET (0069-1111-01) ",
"NDC11Code": "00025-0325-02",
"ProductNDC": "0025-0325",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abrilada",
"NonProprietaryName": "Adalimumab-afzb",
"DosageFormName": "KIT",
"StartMarketingDate": "20231214",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761118",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Active",
"LastUpdate": "2026-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231214",
"SamplePackage": "N",
"IndicationAndUsage": "ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in adult patients. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adult patients. (1.9).",
"Description": "Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP."
},
{
"NDCCode": "0069-0325-02",
"PackageDescription": "2 KIT in 1 CARTON (0069-0325-02) / 1 KIT in 1 KIT * .8 mL in 1 SYRINGE (0069-0318-01) * 1 mL in 1 PACKET (0069-1111-01) ",
"NDC11Code": "00069-0325-02",
"ProductNDC": "0069-0325",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abrilada",
"NonProprietaryName": "Adalimumab-afzb",
"DosageFormName": "KIT",
"StartMarketingDate": "20231018",
"EndMarketingDate": "20260430",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761118",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20231018",
"EndMarketingDatePackage": "20260430",
"SamplePackage": "N",
"IndicationAndUsage": "ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in adult patients. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adult patients. (1.9).",
"Description": "Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP."
},
{
"NDCCode": "10096-0318-2",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (10096-0318-2) > 50 mL in 1 BOTTLE, PUMP (10096-0318-1)",
"NDC11Code": "10096-0318-02",
"ProductNDC": "10096-0318",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Avon Elements",
"ProprietaryNameSuffix": "Youth Restoring Multi-purpose",
"NonProprietaryName": "Homosalate, Octinoxate, Oxybenzone, Avobenzone",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140317",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "New Avon LLC",
"SubstanceName": "HOMOSALATE; OCTINOXATE; OXYBENZONE; AVOBENZONE",
"StrengthNumber": "80; 50; 40; 29",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Uses: 1 helps prevent sunburn."
},
{
"NDCCode": "15631-0318-2",
"PackageDescription": "400 PELLET in 1 PACKAGE (15631-0318-2) ",
"NDC11Code": "15631-0318-02",
"ProductNDC": "15631-0318",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Oenanthe Crocata",
"NonProprietaryName": "Oenanthe Crocata",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150910",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "OENANTHE CROCATA ROOT",
"StrengthNumber": "3",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "37662-0318-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-0318-2) ",
"NDC11Code": "37662-0318-02",
"ProductNDC": "37662-0318",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cina",
"NonProprietaryName": "Cina",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220603",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "ARTEMISIA CINA PRE-FLOWERING TOP",
"StrengthNumber": "200",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220603",
"SamplePackage": "N"
},
{
"NDCCode": "43225-0318-1",
"PackageDescription": "1 BAG in 1 BOX (43225-0318-1) > 25 kg in 1 BAG (43225-0318-2)",
"NDC11Code": "43225-0318-01",
"ProductNDC": "43225-0318",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Methylcobalamin",
"DosageFormName": "POWDER",
"StartMarketingDate": "20120315",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Hebei Huarong Pharmaceutical Co.,Ltd.",
"SubstanceName": "METHYLCOBALAMIN",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "50090-7998-0",
"PackageDescription": "2 KIT in 1 CARTON (50090-7998-0) / 1 KIT in 1 KIT * .8 mL in 1 SYRINGE (0025-0318-01) * 1 mL in 1 PACKET (0069-1111-01) ",
"NDC11Code": "50090-7998-00",
"ProductNDC": "50090-7998",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abrilada",
"NonProprietaryName": "Adalimumab-afzb",
"DosageFormName": "KIT",
"StartMarketingDate": "20231214",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761118",
"LabelerName": "A-S Medication Solutions",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260617",
"SamplePackage": "N",
"IndicationAndUsage": "ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in adult patients. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adult patients. (1.9).",
"Description": "Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP."
},
{
"NDCCode": "57955-0318-2",
"PackageDescription": "59 mL in 1 BOTTLE, SPRAY (57955-0318-2)",
"NDC11Code": "57955-0318-02",
"ProductNDC": "57955-0318",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Childrens Appetite Enhancer",
"NonProprietaryName": "Alumina, Antimonium Crudum, Arsenicum Album, Asarum Europaeum, Baptisia Tinctoria, Carbolicum Acidum, Chininum Arsenicosum, Cocculus Indicus, Lecithin, Picricum Acidum, Pulsatilla, Rhus Toxicodendron, Silicea, Sulphur",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20150831",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "King Bio Inc.",
"SubstanceName": "ALUMINUM OXIDE; ANTIMONY TRISULFIDE; ARSENIC TRIOXIDE; ASARUM EUROPAEUM; BAPTISIA TINCTORIA ROOT; PHENOL; QUININE ARSENITE; ANAMIRTA COCCULUS SEED; EGG PHOSPHOLIPIDS; PICRIC ACID; PULSATILLA VULGARIS; TOXICODENDRON PUBESCENS LEAF; SILICON DIOXIDE; SULFUR",
"StrengthNumber": "10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10",
"StrengthUnit": "[hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Uses for temporary relief of: loss of appetite, no desire to eat, aversion to foods, inability to bear the sight and smell of food."
},
{
"NDCCode": "58232-0318-2",
"PackageDescription": "14 g in 1 TUBE (58232-0318-2)",
"NDC11Code": "58232-0318-02",
"ProductNDC": "58232-0318",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Clean And Clear Advantage 3-in-1 Exfoliating Cleanser",
"NonProprietaryName": "Benzoyl Peroxide",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100301",
"EndMarketingDate": "20160201",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333D",
"LabelerName": "Johnson & Johnson Conosumer Products Company, Division of Johnson & Johnson Consumer Companies, Inc.",
"SubstanceName": "BENZOYL PEROXIDE",
"StrengthNumber": "5.57",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2016-02-05"
},
{
"NDCCode": "62001-0318-2",
"PackageDescription": "454 g in 1 CONTAINER (62001-0318-2)",
"NDC11Code": "62001-0318-02",
"ProductNDC": "62001-0318",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Medic Ice",
"NonProprietaryName": "Menthol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20040824",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Straight Arrow Products, Inc.",
"SubstanceName": "MENTHOL",
"StrengthNumber": ".07",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "70518-0318-1",
"PackageDescription": "100 POUCH in 1 BOX (70518-0318-1) > 1 TABLET, FILM COATED in 1 POUCH (70518-0318-2) ",
"NDC11Code": "70518-0318-01",
"ProductNDC": "70518-0318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluphenazine Hydrochloride",
"NonProprietaryName": "Fluphenazine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170315",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089743",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "FLUPHENAZINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-08-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20191002",
"SamplePackage": "N"
},
{
"NDCCode": "71335-0318-2",
"PackageDescription": "60 TABLET, DELAYED RELEASE in 1 BOTTLE (71335-0318-2) ",
"NDC11Code": "71335-0318-02",
"ProductNDC": "71335-0318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naproxen",
"NonProprietaryName": "Naproxen",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091432",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "NAPROXEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20160705",
"SamplePackage": "N"
},
{
"NDCCode": "80425-0318-2",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (80425-0318-2) / 9 TABLET in 1 BLISTER PACK",
"NDC11Code": "80425-0318-02",
"ProductNDC": "80425-0318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sumatriptan",
"NonProprietaryName": "Sumatriptan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078327",
"LabelerName": "Advanced Rx Pharmacy of Tennessee, LLC",
"SubstanceName": "SUMATRIPTAN SUCCINATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230407",
"SamplePackage": "N",
"IndicationAndUsage": "Sumatriptan tablets are indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: : 1 Use only if a clear diagnosis of migraine headache has been established. If a patient has no response to the first migraine attack treated with sumatriptan tablets, reconsider the diagnosis of migraine before sumatriptan tablets are administered to treat any subsequent attacks., 2 Sumatriptan tablets are not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of sumatriptan tablets have not been established for cluster headache.",
"Description": "Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure. The molecular formula is C14H21N3O2SC4H6O4, representing a molecular weight of 413.5. Sumatriptan succinate USP is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35 mg, 70 mg, or 140 mg of sumatriptan succinate USP equivalent to 25 mg, 50 mg, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose, polysorbate 80, and sodium bicarbonate."
},
{
"NDCCode": "0025-0325-01",
"PackageDescription": "1 KIT in 1 CARTON (0025-0325-01) / 1 KIT in 1 KIT * .8 mL in 1 SYRINGE (0025-0318-01) * 1 mL in 1 PACKET (0069-1111-01) ",
"NDC11Code": "00025-0325-01",
"ProductNDC": "0025-0325",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abrilada",
"NonProprietaryName": "Adalimumab-afzb",
"DosageFormName": "KIT",
"StartMarketingDate": "20231214",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761118",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Active",
"LastUpdate": "2026-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231214",
"SamplePackage": "N",
"IndicationAndUsage": "ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in adult patients. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adult patients. (1.9).",
"Description": "Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP."
},
{
"NDCCode": "0069-0325-01",
"PackageDescription": "1 KIT in 1 CARTON (0069-0325-01) / 1 KIT in 1 KIT * .8 mL in 1 SYRINGE (0069-0318-01) * 1 mL in 1 PACKET (0069-1111-01) ",
"NDC11Code": "00069-0325-01",
"ProductNDC": "0069-0325",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Abrilada",
"NonProprietaryName": "Adalimumab-afzb",
"DosageFormName": "KIT",
"StartMarketingDate": "20231018",
"EndMarketingDate": "20260430",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761118",
"LabelerName": "Pfizer Laboratories Div Pfizer Inc",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20231018",
"EndMarketingDatePackage": "20260430",
"SamplePackage": "N",
"IndicationAndUsage": "ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in adult patients. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adult patients. (1.9).",
"Description": "Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP."
},
{
"NDCCode": "0093-0318-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (0093-0318-01) ",
"NDC11Code": "00093-0318-01",
"ProductNDC": "0093-0318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19951222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074185",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19951222",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem hydrochloride tablets are indicated for the management of chronic stable angina and angina due to coronary artery spasm.",
"Description": "Diltiazem hydrochloride tablets, USP are a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride, USP is 1,5-Benzothiazepin-4(5H)-one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2,3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride,(+)-cis-. The structural formula is. C22H26N2O4SHCl M.W. 450.98. Diltiazem hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Each tablet for oral administration contains 30 mg, 60 mg, 90 mg, or 120 mg of diltiazem hydrochloride, USP. Each tablet also contains the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, povidone, titanium dioxide and FD&C yellow No. 6 aluminum lake."
},
{
"NDCCode": "0093-0318-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (0093-0318-05) ",
"NDC11Code": "00093-0318-05",
"ProductNDC": "0093-0318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19951222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074185",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19951228",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem hydrochloride tablets are indicated for the management of chronic stable angina and angina due to coronary artery spasm.",
"Description": "Diltiazem hydrochloride tablets, USP are a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride, USP is 1,5-Benzothiazepin-4(5H)-one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2,3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride,(+)-cis-. The structural formula is. C22H26N2O4SHCl M.W. 450.98. Diltiazem hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Each tablet for oral administration contains 30 mg, 60 mg, 90 mg, or 120 mg of diltiazem hydrochloride, USP. Each tablet also contains the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, povidone, titanium dioxide and FD&C yellow No. 6 aluminum lake."
},
{
"NDCCode": "10370-318-02",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (10370-318-02) ",
"NDC11Code": "10370-0318-02",
"ProductNDC": "10370-318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sitagliptin And Metformin Hydrochloride",
"NonProprietaryName": "Sitagliptin And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260724",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204144",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "SITAGLIPTIN PHOSPHATE; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "50; 1000",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260724",
"SamplePackage": "N",
"IndicationAndUsage": "Sitagliptin and metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Limitations of Use. Sitagliptin and metformin hydrochloride extended-release tablets should not be used in patients with type 1 diabetes mellitus. Sitagliptin and metformin hydrochloride extended-release tablets have not been studied in patients with a history of pancreatitis. It is unknown whether patients with a history of pancreatitis are at increased risk for the development of pancreatitis while using sitagliptin and metformin hydrochloride extended-release tablets [see Warnings and Precautions (5.2)].",
"Description": "Sitagliptin and metformin hydrochloride extended-release tablets for oral use contain two antihyperglycemic medications: sitagliptin and metformin extended-release. Sitagliptin. Sitagliptin is an orally-active inhibitor of the dipeptidyl peptidase-4 (DPP-4) enzyme. Sitagliptin phosphatedrug substance is used to manufacture sitagliptin and metformin hydrochloride extended-release tablets. Sitagliptin phosphate is described chemically as 7-[(R)-3-Amino-4-(2,4,5-trifluorophenyl)butanoyl]-3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo[4,3-a]pyrazine monophosphate with an molecular formula of C16H15F6N5OH3PO4 and a molecular weight of 505.31. The structural formula is:. Sitagliptin phosphate is a white to off-white, crystalline powder and slightly hygroscopic in nature. It is soluble in water, very slightly soluble in anhydrous ethanol and practically insoluble in n-heptane. Metformin. Metformin hydrochloride, USP (Imidodicarbonimidic diamide, N,N-dimethyl-, monohydrochloride) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.6. Metformin hydrochloride, USP is freely soluble in water, slightly soluble in alcohol and is practically insoluble in acetone, and in methylene chloride. The pKa of metformin hydrochloride, USP is 12.1. The pH of 10 % solution of metformin hydrochloride, USP in purified water is 6.89 ( ̴ 7.0), at the temperature 25°C. The structural formula is as shown. Sitagliptin and Metformin Hydrochloride Extended-Release Tablets. Sitagliptin and metformin hydrochloride extended-release tablets are available as bi-convex oval, film-coated tablets containing: 1 62.03 mg sitagliptin phosphate (equivalent to 50 mg sitagliptin) and 500 mg metformin hydrochloride (sitagliptin and metformin hydrochloride extended-release tablets 50/500)., 2 62.03 mg sitagliptin phosphate (equivalent to 50 mg sitagliptin) and 1000 mg metformin hydrochloride (sitagliptin and metformin hydrochloride extended-release tablets 50/1000). , 3 124.06 mg sitagliptin phosphate (equivalent to 100 mg sitagliptin) and 1000 mg metformin hydrochloride (sitagliptin and metformin hydrochloride extended-release tablets 100/1000)."
},
{
"NDCCode": "13533-318-01",
"PackageDescription": "1 VIAL in 1 CARTON (13533-318-01) / 1 mL in 1 VIAL (13533-318-10) ",
"NDC11Code": "13533-0318-01",
"ProductNDC": "13533-318",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Hyperrab",
"NonProprietaryName": "Rabies Immune Globulin (human)",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; INTRAMUSCULAR",
"StartMarketingDate": "19740612",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101144",
"LabelerName": "GRIFOLS USA, LLC",
"SubstanceName": "HUMAN RABIES VIRUS IMMUNE GLOBULIN",
"StrengthNumber": "300",
"StrengthUnit": "[iU]/mL",
"Status": "Active",
"LastUpdate": "2024-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740612",
"SamplePackage": "N",
"IndicationAndUsage": "HYPERRAB is a human rabies immune globulin indicated for postexposure prophylaxis, along with rabies vaccine, for all persons suspected of exposure to rabies. Limitations of Use. Persons who have been previously immunized with rabies vaccine and have a confirmed adequate rabies antibody titer should receive only vaccine.(1-3). For unvaccinated persons, the combination of HYPERRAB and vaccine is recommended for both bite and nonbite exposures regardless of the time interval between exposure and initiation of postexposure prophylaxis.(1-3). Beyond 7 days (after the first vaccine dose), HYPERRAB is not indicated since an antibody response to vaccine is presumed to have occurred.",
"Description": "HYPERRAB is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human antirabies immune globulin for infiltration and intramuscular administration. HYPERRAB is provided in a single-dose vial and contains no preservative. HYPERRAB is prepared from pools of human plasma collected from healthy donors (hyperimmunized with rabies vaccine) by a combination of cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion-exchange chromatography, nanofiltration and low pH incubation. HYPERRAB consists of 15 to 18% protein at pH 4.1 to 4.8 in 0.16 to 0.26 M glycine. The product is standardized against the U.S. Standard Rabies Immune Globulin to contain a potency value of not less than 300 IU/mL. The U.S. unit of potency is equivalent to the international unit (IU) for rabies antibody. When medicinal biological products are administered, infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogens. In the manufacturing process of HYPERRAB, there are several steps with the capacity for virus inactivation or removal.(6) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation."
},
{
"NDCCode": "13533-318-03",
"PackageDescription": "1 VIAL in 1 CARTON (13533-318-03) / 3 mL in 1 VIAL (13533-318-30) ",
"NDC11Code": "13533-0318-03",
"ProductNDC": "13533-318",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Hyperrab",
"NonProprietaryName": "Rabies Immune Globulin (human)",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; INTRAMUSCULAR",
"StartMarketingDate": "19740612",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101144",
"LabelerName": "GRIFOLS USA, LLC",
"SubstanceName": "HUMAN RABIES VIRUS IMMUNE GLOBULIN",
"StrengthNumber": "300",
"StrengthUnit": "[iU]/mL",
"Status": "Active",
"LastUpdate": "2024-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740612",
"SamplePackage": "N",
"IndicationAndUsage": "HYPERRAB is a human rabies immune globulin indicated for postexposure prophylaxis, along with rabies vaccine, for all persons suspected of exposure to rabies. Limitations of Use. Persons who have been previously immunized with rabies vaccine and have a confirmed adequate rabies antibody titer should receive only vaccine.(1-3). For unvaccinated persons, the combination of HYPERRAB and vaccine is recommended for both bite and nonbite exposures regardless of the time interval between exposure and initiation of postexposure prophylaxis.(1-3). Beyond 7 days (after the first vaccine dose), HYPERRAB is not indicated since an antibody response to vaccine is presumed to have occurred.",
"Description": "HYPERRAB is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human antirabies immune globulin for infiltration and intramuscular administration. HYPERRAB is provided in a single-dose vial and contains no preservative. HYPERRAB is prepared from pools of human plasma collected from healthy donors (hyperimmunized with rabies vaccine) by a combination of cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion-exchange chromatography, nanofiltration and low pH incubation. HYPERRAB consists of 15 to 18% protein at pH 4.1 to 4.8 in 0.16 to 0.26 M glycine. The product is standardized against the U.S. Standard Rabies Immune Globulin to contain a potency value of not less than 300 IU/mL. The U.S. unit of potency is equivalent to the international unit (IU) for rabies antibody. When medicinal biological products are administered, infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogens. In the manufacturing process of HYPERRAB, there are several steps with the capacity for virus inactivation or removal.(6) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation."
},
{
"NDCCode": "13533-318-05",
"PackageDescription": "1 VIAL in 1 CARTON (13533-318-05) / 5 mL in 1 VIAL (13533-318-50) ",
"NDC11Code": "13533-0318-05",
"ProductNDC": "13533-318",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Hyperrab",
"NonProprietaryName": "Rabies Immune Globulin (human)",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; INTRAMUSCULAR",
"StartMarketingDate": "19740612",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101144",
"LabelerName": "GRIFOLS USA, LLC",
"SubstanceName": "HUMAN RABIES VIRUS IMMUNE GLOBULIN",
"StrengthNumber": "300",
"StrengthUnit": "[iU]/mL",
"Status": "Active",
"LastUpdate": "2024-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740612",
"SamplePackage": "N",
"IndicationAndUsage": "HYPERRAB is a human rabies immune globulin indicated for postexposure prophylaxis, along with rabies vaccine, for all persons suspected of exposure to rabies. Limitations of Use. Persons who have been previously immunized with rabies vaccine and have a confirmed adequate rabies antibody titer should receive only vaccine.(1-3). For unvaccinated persons, the combination of HYPERRAB and vaccine is recommended for both bite and nonbite exposures regardless of the time interval between exposure and initiation of postexposure prophylaxis.(1-3). Beyond 7 days (after the first vaccine dose), HYPERRAB is not indicated since an antibody response to vaccine is presumed to have occurred.",
"Description": "HYPERRAB is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human antirabies immune globulin for infiltration and intramuscular administration. HYPERRAB is provided in a single-dose vial and contains no preservative. HYPERRAB is prepared from pools of human plasma collected from healthy donors (hyperimmunized with rabies vaccine) by a combination of cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion-exchange chromatography, nanofiltration and low pH incubation. HYPERRAB consists of 15 to 18% protein at pH 4.1 to 4.8 in 0.16 to 0.26 M glycine. The product is standardized against the U.S. Standard Rabies Immune Globulin to contain a potency value of not less than 300 IU/mL. The U.S. unit of potency is equivalent to the international unit (IU) for rabies antibody. When medicinal biological products are administered, infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogens. In the manufacturing process of HYPERRAB, there are several steps with the capacity for virus inactivation or removal.(6) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation."
},
{
"NDCCode": "14593-318-01",
"PackageDescription": "10 VIAL in 1 CARTON (14593-318-01) / 10 mL in 1 VIAL",
"NDC11Code": "14593-0318-01",
"ProductNDC": "14593-318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20241028",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203521",
"LabelerName": "Emcure Pharmaceuticals Limited",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "1",
"StrengthUnit": "g/10mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]",
"Status": "Active",
"LastUpdate": "2024-10-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241028",
"SamplePackage": "N",
"IndicationAndUsage": "Tranexamic acid injection, USP is indicated in patients with hemophilia for short-term use (2 to 8 days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction."
},
{
"NDCCode": "15955-318-01",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (15955-318-01) ",
"NDC11Code": "15955-0318-01",
"ProductNDC": "15955-318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121019",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203657",
"LabelerName": "Alembic Labs LLC",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2020-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121019",
"SamplePackage": "N",
"IndicationAndUsage": "For use as adjunctive therapy in the treatment of peptic ulcer.",
"Description": "Glycopyrrolate Tablets contain the synthetic anticholinergic, glycopyrrolate. Glycopyrrolate is a quaternary ammonium compound with the following chemical name:. 3-[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethylpyrrolidinium bromide. Glycopyrrolate Tablets 1 mg are white, round-shape, flat face bevel edge, scored, with “OL” above bisect and “305” below bisect. Each tablet contains: Glycopyrrolate, USP..........................1 mg Glycopyrrolate Tablets 2 mg are white, round-shape, flat face bevel edge, scored, with “OL” above bisect and “318” below bisect. Each tablet contains: Glycopyrrolate, USP..........................2 mg Inactive Ingredients: Copovidone, Dibasic Calcium Phosphate, Lactose Anhydrous, Magnesium Stearate, Sodium Starch Glycolate."
},
{
"NDCCode": "16729-318-01",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (16729-318-01) ",
"NDC11Code": "16729-0318-01",
"ProductNDC": "16729-318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxybutynin Chloride",
"NonProprietaryName": "Oxybutynin Chloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20161220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207138",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "OXYBUTYNIN CHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20161220",
"SamplePackage": "N",
"IndicationAndUsage": "Oxybutynin chloride extended-release tablets are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).",
"Description": "Oxybutynin chloride extended-release tablet, USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet, USP contains 5 mg, 10 mg, or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride is d,l (racemic) 4-diethylamino-2-butynyl phenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride is C 22H 31NO 3HCl. Its structural formula is. Oxybutynin chloride is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablets, USP contains the following inert ingredients: colloidal anhydrous silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer type-c, microcrystalline cellulose, polyethylene glycol, sodium bicarbonate, sodium lauryl sulfate, talc, titanium dioxide, triethyl citrate. Coloring agents are ferric oxide yellow (in all strengths), ferric oxide red (in 5 mg and 10 mg only) and ferric oxide black (in 15 mg only). System Components and Performance. Oxybutynin chloride extended-release tablets, USP are formulated to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet surrounded by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases drug at a controlled rate via diffusion and/or erosion. Oxybutynin chloride extended-release tablets, USP meets USP dissolution test 5."
},
{
"NDCCode": "16729-318-16",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (16729-318-16) ",
"NDC11Code": "16729-0318-16",
"ProductNDC": "16729-318",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxybutynin Chloride",
"NonProprietaryName": "Oxybutynin Chloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20161220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207138",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "OXYBUTYNIN CHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170417",
"SamplePackage": "N",
"IndicationAndUsage": "Oxybutynin chloride extended-release tablets are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).",
"Description": "Oxybutynin chloride extended-release tablet, USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet, USP contains 5 mg, 10 mg, or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride is d,l (racemic) 4-diethylamino-2-butynyl phenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride is C 22H 31NO 3HCl. Its structural formula is. Oxybutynin chloride is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablets, USP contains the following inert ingredients: colloidal anhydrous silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer type-c, microcrystalline cellulose, polyethylene glycol, sodium bicarbonate, sodium lauryl sulfate, talc, titanium dioxide, triethyl citrate. Coloring agents are ferric oxide yellow (in all strengths), ferric oxide red (in 5 mg and 10 mg only) and ferric oxide black (in 15 mg only). System Components and Performance. Oxybutynin chloride extended-release tablets, USP are formulated to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet surrounded by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases drug at a controlled rate via diffusion and/or erosion. Oxybutynin chloride extended-release tablets, USP meets USP dissolution test 5."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0318-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0318-1)</PackageDescription>
<NDC11Code>49288-0318-01</NDC11Code>
<ProductNDC>49288-0318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mucor Racemosus</ProprietaryName>
<NonProprietaryName>Mucor Racemosus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>MUCOR RACEMOSUS</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0318-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0318-2)</PackageDescription>
<NDC11Code>49288-0318-02</NDC11Code>
<ProductNDC>49288-0318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mucor Racemosus</ProprietaryName>
<NonProprietaryName>Mucor Racemosus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>MUCOR RACEMOSUS</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0318-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0318-3)</PackageDescription>
<NDC11Code>49288-0318-03</NDC11Code>
<ProductNDC>49288-0318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mucor Racemosus</ProprietaryName>
<NonProprietaryName>Mucor Racemosus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>MUCOR RACEMOSUS</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0318-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0318-4)</PackageDescription>
<NDC11Code>49288-0318-04</NDC11Code>
<ProductNDC>49288-0318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mucor Racemosus</ProprietaryName>
<NonProprietaryName>Mucor Racemosus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>MUCOR RACEMOSUS</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0318-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0318-5)</PackageDescription>
<NDC11Code>49288-0318-05</NDC11Code>
<ProductNDC>49288-0318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mucor Racemosus</ProprietaryName>
<NonProprietaryName>Mucor Racemosus</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>MUCOR RACEMOSUS</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>0025-0325-02</NDCCode>
<PackageDescription>2 KIT in 1 CARTON (0025-0325-02) / 1 KIT in 1 KIT * .8 mL in 1 SYRINGE (0025-0318-01) * 1 mL in 1 PACKET (0069-1111-01) </PackageDescription>
<NDC11Code>00025-0325-02</NDC11Code>
<ProductNDC>0025-0325</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abrilada</ProprietaryName>
<NonProprietaryName>Adalimumab-afzb</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20231214</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761118</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in adult patients. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adult patients. (1.9).</IndicationAndUsage>
<Description>Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>0069-0325-02</NDCCode>
<PackageDescription>2 KIT in 1 CARTON (0069-0325-02) / 1 KIT in 1 KIT * .8 mL in 1 SYRINGE (0069-0318-01) * 1 mL in 1 PACKET (0069-1111-01) </PackageDescription>
<NDC11Code>00069-0325-02</NDC11Code>
<ProductNDC>0069-0325</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abrilada</ProprietaryName>
<NonProprietaryName>Adalimumab-afzb</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20231018</StartMarketingDate>
<EndMarketingDate>20260430</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761118</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20231018</StartMarketingDatePackage>
<EndMarketingDatePackage>20260430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in adult patients. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adult patients. (1.9).</IndicationAndUsage>
<Description>Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>10096-0318-2</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (10096-0318-2) > 50 mL in 1 BOTTLE, PUMP (10096-0318-1)</PackageDescription>
<NDC11Code>10096-0318-02</NDC11Code>
<ProductNDC>10096-0318</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Avon Elements</ProprietaryName>
<ProprietaryNameSuffix>Youth Restoring Multi-purpose</ProprietaryNameSuffix>
<NonProprietaryName>Homosalate, Octinoxate, Oxybenzone, Avobenzone</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140317</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>New Avon LLC</LabelerName>
<SubstanceName>HOMOSALATE; OCTINOXATE; OXYBENZONE; AVOBENZONE</SubstanceName>
<StrengthNumber>80; 50; 40; 29</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Uses: 1 helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>15631-0318-2</NDCCode>
<PackageDescription>400 PELLET in 1 PACKAGE (15631-0318-2) </PackageDescription>
<NDC11Code>15631-0318-02</NDC11Code>
<ProductNDC>15631-0318</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Oenanthe Crocata</ProprietaryName>
<NonProprietaryName>Oenanthe Crocata</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150910</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>OENANTHE CROCATA ROOT</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37662-0318-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-0318-2) </PackageDescription>
<NDC11Code>37662-0318-02</NDC11Code>
<ProductNDC>37662-0318</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cina</ProprietaryName>
<NonProprietaryName>Cina</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220603</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>ARTEMISIA CINA PRE-FLOWERING TOP</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43225-0318-1</NDCCode>
<PackageDescription>1 BAG in 1 BOX (43225-0318-1) > 25 kg in 1 BAG (43225-0318-2)</PackageDescription>
<NDC11Code>43225-0318-01</NDC11Code>
<ProductNDC>43225-0318</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Methylcobalamin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20120315</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Hebei Huarong Pharmaceutical Co.,Ltd.</LabelerName>
<SubstanceName>METHYLCOBALAMIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50090-7998-0</NDCCode>
<PackageDescription>2 KIT in 1 CARTON (50090-7998-0) / 1 KIT in 1 KIT * .8 mL in 1 SYRINGE (0025-0318-01) * 1 mL in 1 PACKET (0069-1111-01) </PackageDescription>
<NDC11Code>50090-7998-00</NDC11Code>
<ProductNDC>50090-7998</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abrilada</ProprietaryName>
<NonProprietaryName>Adalimumab-afzb</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20231214</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761118</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in adult patients. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adult patients. (1.9).</IndicationAndUsage>
<Description>Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>57955-0318-2</NDCCode>
<PackageDescription>59 mL in 1 BOTTLE, SPRAY (57955-0318-2)</PackageDescription>
<NDC11Code>57955-0318-02</NDC11Code>
<ProductNDC>57955-0318</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Childrens Appetite Enhancer</ProprietaryName>
<NonProprietaryName>Alumina, Antimonium Crudum, Arsenicum Album, Asarum Europaeum, Baptisia Tinctoria, Carbolicum Acidum, Chininum Arsenicosum, Cocculus Indicus, Lecithin, Picricum Acidum, Pulsatilla, Rhus Toxicodendron, Silicea, Sulphur</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150831</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>King Bio Inc.</LabelerName>
<SubstanceName>ALUMINUM OXIDE; ANTIMONY TRISULFIDE; ARSENIC TRIOXIDE; ASARUM EUROPAEUM; BAPTISIA TINCTORIA ROOT; PHENOL; QUININE ARSENITE; ANAMIRTA COCCULUS SEED; EGG PHOSPHOLIPIDS; PICRIC ACID; PULSATILLA VULGARIS; TOXICODENDRON PUBESCENS LEAF; SILICON DIOXIDE; SULFUR</SubstanceName>
<StrengthNumber>10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10</StrengthNumber>
<StrengthUnit>[hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Uses for temporary relief of: loss of appetite, no desire to eat, aversion to foods, inability to bear the sight and smell of food.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>58232-0318-2</NDCCode>
<PackageDescription>14 g in 1 TUBE (58232-0318-2)</PackageDescription>
<NDC11Code>58232-0318-02</NDC11Code>
<ProductNDC>58232-0318</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Clean And Clear Advantage 3-in-1 Exfoliating Cleanser</ProprietaryName>
<NonProprietaryName>Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100301</StartMarketingDate>
<EndMarketingDate>20160201</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333D</ApplicationNumber>
<LabelerName>Johnson & Johnson Conosumer Products Company, Division of Johnson & Johnson Consumer Companies, Inc.</LabelerName>
<SubstanceName>BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>5.57</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-02-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>62001-0318-2</NDCCode>
<PackageDescription>454 g in 1 CONTAINER (62001-0318-2)</PackageDescription>
<NDC11Code>62001-0318-02</NDC11Code>
<ProductNDC>62001-0318</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Medic Ice</ProprietaryName>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20040824</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Straight Arrow Products, Inc.</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>.07</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>70518-0318-1</NDCCode>
<PackageDescription>100 POUCH in 1 BOX (70518-0318-1) > 1 TABLET, FILM COATED in 1 POUCH (70518-0318-2) </PackageDescription>
<NDC11Code>70518-0318-01</NDC11Code>
<ProductNDC>70518-0318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluphenazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Fluphenazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170315</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089743</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>FLUPHENAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191002</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-0318-2</NDCCode>
<PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (71335-0318-2) </PackageDescription>
<NDC11Code>71335-0318-02</NDC11Code>
<ProductNDC>71335-0318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naproxen</ProprietaryName>
<NonProprietaryName>Naproxen</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091432</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>NAPROXEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>80425-0318-2</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (80425-0318-2) / 9 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>80425-0318-02</NDC11Code>
<ProductNDC>80425-0318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sumatriptan</ProprietaryName>
<NonProprietaryName>Sumatriptan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078327</ApplicationNumber>
<LabelerName>Advanced Rx Pharmacy of Tennessee, LLC</LabelerName>
<SubstanceName>SUMATRIPTAN SUCCINATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sumatriptan tablets are indicated for the acute treatment of migraine with or without aura in adults. Limitations of Use: : 1 Use only if a clear diagnosis of migraine headache has been established. If a patient has no response to the first migraine attack treated with sumatriptan tablets, reconsider the diagnosis of migraine before sumatriptan tablets are administered to treat any subsequent attacks., 2 Sumatriptan tablets are not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of sumatriptan tablets have not been established for cluster headache.</IndicationAndUsage>
<Description>Sumatriptan tablets, USP contain sumatriptan succinate, a selective 5-HT1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure. The molecular formula is C14H21N3O2SC4H6O4, representing a molecular weight of 413.5. Sumatriptan succinate USP is a white to off-white powder that is readily soluble in water and in saline. Each sumatriptan tablet, USP for oral administration contains 35 mg, 70 mg, or 140 mg of sumatriptan succinate USP equivalent to 25 mg, 50 mg, or 100 mg of sumatriptan, respectively. Each tablet also contains the inactive ingredients croscarmellose sodium, dibasic calcium phosphate anhydrous, magnesium stearate, microcrystalline cellulose, polysorbate 80, and sodium bicarbonate.</Description>
</NDC>
<NDC>
<NDCCode>0025-0325-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0025-0325-01) / 1 KIT in 1 KIT * .8 mL in 1 SYRINGE (0025-0318-01) * 1 mL in 1 PACKET (0069-1111-01) </PackageDescription>
<NDC11Code>00025-0325-01</NDC11Code>
<ProductNDC>0025-0325</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abrilada</ProprietaryName>
<NonProprietaryName>Adalimumab-afzb</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20231214</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761118</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in adult patients. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adult patients. (1.9).</IndicationAndUsage>
<Description>Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>0069-0325-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0069-0325-01) / 1 KIT in 1 KIT * .8 mL in 1 SYRINGE (0069-0318-01) * 1 mL in 1 PACKET (0069-1111-01) </PackageDescription>
<NDC11Code>00069-0325-01</NDC11Code>
<ProductNDC>0069-0325</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Abrilada</ProprietaryName>
<NonProprietaryName>Adalimumab-afzb</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20231018</StartMarketingDate>
<EndMarketingDate>20260430</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761118</ApplicationNumber>
<LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20231018</StartMarketingDatePackage>
<EndMarketingDatePackage>20260430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ABRILADA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in adult patients. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adult patients. (1.9).</IndicationAndUsage>
<Description>Adalimumab-afzb is a tumor necrosis factor (TNF) blocker. Adalimumab-afzb is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-afzb is produced by recombinant DNA technology in Chinese hamster ovary cells and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. ABRILADA (adalimumab-afzb) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose prefilled pen (ABRILADA pen), as a single-dose 1 mL prefilled glass syringe, or as a single-dose institutional use vial. Enclosed within the pen is a single-dose 1 mL prefilled glass syringe. The solution of ABRILADA is clear and colorless to very light brown, with a pH of about 5.5. Each 40 mg/0.8 mL prefilled syringe, prefilled pen, or single-dose institutional use vial delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of ABRILADA contains adalimumab-afzb (40 mg), edetate disodium dihydrate (0.04 mg), L-histidine (0.63mg), L-histidine hydrochloride monohydrate (2.51 mg), L-methionine (0.16 mg), polysorbate 80 (0.16 mg), sucrose (68 mg), and Water for Injection, USP. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of ABRILADA contains adalimumab-afzb (20 mg), edetate disodium dihydrate (0.02 mg), L-histidine (0.314 mg), L-histidine hydrochloride monohydrate (1.253 mg), L-methionine (0.08 mg), polysorbate 80 (0.08 mg), sucrose (34 mg), and Water for Injection, USP. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of ABRILADA contains adalimumab-afzb (10 mg), edetate disodium dihydrate (0.01 mg), L-histidine (0.157 mg), L-histidine hydrochloride monohydrate (0.626 mg), L-methionine (0.04 mg), polysorbate 80 (0.04 mg), sucrose (17 mg), and Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>0093-0318-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (0093-0318-01) </PackageDescription>
<NDC11Code>00093-0318-01</NDC11Code>
<ProductNDC>0093-0318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19951222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074185</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19951222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem hydrochloride tablets are indicated for the management of chronic stable angina and angina due to coronary artery spasm.</IndicationAndUsage>
<Description>Diltiazem hydrochloride tablets, USP are a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride, USP is 1,5-Benzothiazepin-4(5H)-one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2,3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride,(+)-cis-. The structural formula is. C22H26N2O4SHCl M.W. 450.98. Diltiazem hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Each tablet for oral administration contains 30 mg, 60 mg, 90 mg, or 120 mg of diltiazem hydrochloride, USP. Each tablet also contains the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, povidone, titanium dioxide and FD&C yellow No. 6 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>0093-0318-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (0093-0318-05) </PackageDescription>
<NDC11Code>00093-0318-05</NDC11Code>
<ProductNDC>0093-0318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19951222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074185</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19951228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem hydrochloride tablets are indicated for the management of chronic stable angina and angina due to coronary artery spasm.</IndicationAndUsage>
<Description>Diltiazem hydrochloride tablets, USP are a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, diltiazem hydrochloride, USP is 1,5-Benzothiazepin-4(5H)-one,3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2,3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride,(+)-cis-. The structural formula is. C22H26N2O4SHCl M.W. 450.98. Diltiazem hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Each tablet for oral administration contains 30 mg, 60 mg, 90 mg, or 120 mg of diltiazem hydrochloride, USP. Each tablet also contains the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, povidone, titanium dioxide and FD&C yellow No. 6 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>10370-318-02</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (10370-318-02) </PackageDescription>
<NDC11Code>10370-0318-02</NDC11Code>
<ProductNDC>10370-318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sitagliptin And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Sitagliptin And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260724</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204144</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>SITAGLIPTIN PHOSPHATE; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50; 1000</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS], Dipeptidyl Peptidase 4 Inhibitor [EPC], Dipeptidyl Peptidase 4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sitagliptin and metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. Limitations of Use. Sitagliptin and metformin hydrochloride extended-release tablets should not be used in patients with type 1 diabetes mellitus. Sitagliptin and metformin hydrochloride extended-release tablets have not been studied in patients with a history of pancreatitis. It is unknown whether patients with a history of pancreatitis are at increased risk for the development of pancreatitis while using sitagliptin and metformin hydrochloride extended-release tablets [see Warnings and Precautions (5.2)].</IndicationAndUsage>
<Description>Sitagliptin and metformin hydrochloride extended-release tablets for oral use contain two antihyperglycemic medications: sitagliptin and metformin extended-release. Sitagliptin. Sitagliptin is an orally-active inhibitor of the dipeptidyl peptidase-4 (DPP-4) enzyme. Sitagliptin phosphatedrug substance is used to manufacture sitagliptin and metformin hydrochloride extended-release tablets. Sitagliptin phosphate is described chemically as 7-[(R)-3-Amino-4-(2,4,5-trifluorophenyl)butanoyl]-3-(trifluoromethyl)-5,6,7,8-tetrahydro-1,2,4-triazolo[4,3-a]pyrazine monophosphate with an molecular formula of C16H15F6N5OH3PO4 and a molecular weight of 505.31. The structural formula is:. Sitagliptin phosphate is a white to off-white, crystalline powder and slightly hygroscopic in nature. It is soluble in water, very slightly soluble in anhydrous ethanol and practically insoluble in n-heptane. Metformin. Metformin hydrochloride, USP (Imidodicarbonimidic diamide, N,N-dimethyl-, monohydrochloride) is a white crystalline powder with a molecular formula of C4H11N5HCl and a molecular weight of 165.6. Metformin hydrochloride, USP is freely soluble in water, slightly soluble in alcohol and is practically insoluble in acetone, and in methylene chloride. The pKa of metformin hydrochloride, USP is 12.1. The pH of 10 % solution of metformin hydrochloride, USP in purified water is 6.89 ( ̴ 7.0), at the temperature 25°C. The structural formula is as shown. Sitagliptin and Metformin Hydrochloride Extended-Release Tablets. Sitagliptin and metformin hydrochloride extended-release tablets are available as bi-convex oval, film-coated tablets containing: 1 62.03 mg sitagliptin phosphate (equivalent to 50 mg sitagliptin) and 500 mg metformin hydrochloride (sitagliptin and metformin hydrochloride extended-release tablets 50/500)., 2 62.03 mg sitagliptin phosphate (equivalent to 50 mg sitagliptin) and 1000 mg metformin hydrochloride (sitagliptin and metformin hydrochloride extended-release tablets 50/1000). , 3 124.06 mg sitagliptin phosphate (equivalent to 100 mg sitagliptin) and 1000 mg metformin hydrochloride (sitagliptin and metformin hydrochloride extended-release tablets 100/1000).</Description>
</NDC>
<NDC>
<NDCCode>13533-318-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (13533-318-01) / 1 mL in 1 VIAL (13533-318-10) </PackageDescription>
<NDC11Code>13533-0318-01</NDC11Code>
<ProductNDC>13533-318</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Hyperrab</ProprietaryName>
<NonProprietaryName>Rabies Immune Globulin (human)</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; INTRAMUSCULAR</RouteName>
<StartMarketingDate>19740612</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101144</ApplicationNumber>
<LabelerName>GRIFOLS USA, LLC</LabelerName>
<SubstanceName>HUMAN RABIES VIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HYPERRAB is a human rabies immune globulin indicated for postexposure prophylaxis, along with rabies vaccine, for all persons suspected of exposure to rabies. Limitations of Use. Persons who have been previously immunized with rabies vaccine and have a confirmed adequate rabies antibody titer should receive only vaccine.(1-3). For unvaccinated persons, the combination of HYPERRAB and vaccine is recommended for both bite and nonbite exposures regardless of the time interval between exposure and initiation of postexposure prophylaxis.(1-3). Beyond 7 days (after the first vaccine dose), HYPERRAB is not indicated since an antibody response to vaccine is presumed to have occurred.</IndicationAndUsage>
<Description>HYPERRAB is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human antirabies immune globulin for infiltration and intramuscular administration. HYPERRAB is provided in a single-dose vial and contains no preservative. HYPERRAB is prepared from pools of human plasma collected from healthy donors (hyperimmunized with rabies vaccine) by a combination of cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion-exchange chromatography, nanofiltration and low pH incubation. HYPERRAB consists of 15 to 18% protein at pH 4.1 to 4.8 in 0.16 to 0.26 M glycine. The product is standardized against the U.S. Standard Rabies Immune Globulin to contain a potency value of not less than 300 IU/mL. The U.S. unit of potency is equivalent to the international unit (IU) for rabies antibody. When medicinal biological products are administered, infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogens. In the manufacturing process of HYPERRAB, there are several steps with the capacity for virus inactivation or removal.(6) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
</NDC>
<NDC>
<NDCCode>13533-318-03</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (13533-318-03) / 3 mL in 1 VIAL (13533-318-30) </PackageDescription>
<NDC11Code>13533-0318-03</NDC11Code>
<ProductNDC>13533-318</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Hyperrab</ProprietaryName>
<NonProprietaryName>Rabies Immune Globulin (human)</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; INTRAMUSCULAR</RouteName>
<StartMarketingDate>19740612</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101144</ApplicationNumber>
<LabelerName>GRIFOLS USA, LLC</LabelerName>
<SubstanceName>HUMAN RABIES VIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HYPERRAB is a human rabies immune globulin indicated for postexposure prophylaxis, along with rabies vaccine, for all persons suspected of exposure to rabies. Limitations of Use. Persons who have been previously immunized with rabies vaccine and have a confirmed adequate rabies antibody titer should receive only vaccine.(1-3). For unvaccinated persons, the combination of HYPERRAB and vaccine is recommended for both bite and nonbite exposures regardless of the time interval between exposure and initiation of postexposure prophylaxis.(1-3). Beyond 7 days (after the first vaccine dose), HYPERRAB is not indicated since an antibody response to vaccine is presumed to have occurred.</IndicationAndUsage>
<Description>HYPERRAB is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human antirabies immune globulin for infiltration and intramuscular administration. HYPERRAB is provided in a single-dose vial and contains no preservative. HYPERRAB is prepared from pools of human plasma collected from healthy donors (hyperimmunized with rabies vaccine) by a combination of cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion-exchange chromatography, nanofiltration and low pH incubation. HYPERRAB consists of 15 to 18% protein at pH 4.1 to 4.8 in 0.16 to 0.26 M glycine. The product is standardized against the U.S. Standard Rabies Immune Globulin to contain a potency value of not less than 300 IU/mL. The U.S. unit of potency is equivalent to the international unit (IU) for rabies antibody. When medicinal biological products are administered, infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogens. In the manufacturing process of HYPERRAB, there are several steps with the capacity for virus inactivation or removal.(6) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
</NDC>
<NDC>
<NDCCode>13533-318-05</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (13533-318-05) / 5 mL in 1 VIAL (13533-318-50) </PackageDescription>
<NDC11Code>13533-0318-05</NDC11Code>
<ProductNDC>13533-318</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Hyperrab</ProprietaryName>
<NonProprietaryName>Rabies Immune Globulin (human)</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; INTRAMUSCULAR</RouteName>
<StartMarketingDate>19740612</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101144</ApplicationNumber>
<LabelerName>GRIFOLS USA, LLC</LabelerName>
<SubstanceName>HUMAN RABIES VIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HYPERRAB is a human rabies immune globulin indicated for postexposure prophylaxis, along with rabies vaccine, for all persons suspected of exposure to rabies. Limitations of Use. Persons who have been previously immunized with rabies vaccine and have a confirmed adequate rabies antibody titer should receive only vaccine.(1-3). For unvaccinated persons, the combination of HYPERRAB and vaccine is recommended for both bite and nonbite exposures regardless of the time interval between exposure and initiation of postexposure prophylaxis.(1-3). Beyond 7 days (after the first vaccine dose), HYPERRAB is not indicated since an antibody response to vaccine is presumed to have occurred.</IndicationAndUsage>
<Description>HYPERRAB is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human antirabies immune globulin for infiltration and intramuscular administration. HYPERRAB is provided in a single-dose vial and contains no preservative. HYPERRAB is prepared from pools of human plasma collected from healthy donors (hyperimmunized with rabies vaccine) by a combination of cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion-exchange chromatography, nanofiltration and low pH incubation. HYPERRAB consists of 15 to 18% protein at pH 4.1 to 4.8 in 0.16 to 0.26 M glycine. The product is standardized against the U.S. Standard Rabies Immune Globulin to contain a potency value of not less than 300 IU/mL. The U.S. unit of potency is equivalent to the international unit (IU) for rabies antibody. When medicinal biological products are administered, infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogens. In the manufacturing process of HYPERRAB, there are several steps with the capacity for virus inactivation or removal.(6) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
</NDC>
<NDC>
<NDCCode>14593-318-01</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (14593-318-01) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>14593-0318-01</NDC11Code>
<ProductNDC>14593-318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20241028</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203521</ApplicationNumber>
<LabelerName>Emcure Pharmaceuticals Limited</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/10mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241028</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tranexamic acid injection, USP is indicated in patients with hemophilia for short-term use (2 to 8 days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>15955-318-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (15955-318-01) </PackageDescription>
<NDC11Code>15955-0318-01</NDC11Code>
<ProductNDC>15955-318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121019</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203657</ApplicationNumber>
<LabelerName>Alembic Labs LLC</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For use as adjunctive therapy in the treatment of peptic ulcer.</IndicationAndUsage>
<Description>Glycopyrrolate Tablets contain the synthetic anticholinergic, glycopyrrolate. Glycopyrrolate is a quaternary ammonium compound with the following chemical name:. 3-[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethylpyrrolidinium bromide. Glycopyrrolate Tablets 1 mg are white, round-shape, flat face bevel edge, scored, with “OL” above bisect and “305” below bisect. Each tablet contains: Glycopyrrolate, USP..........................1 mg Glycopyrrolate Tablets 2 mg are white, round-shape, flat face bevel edge, scored, with “OL” above bisect and “318” below bisect. Each tablet contains: Glycopyrrolate, USP..........................2 mg Inactive Ingredients: Copovidone, Dibasic Calcium Phosphate, Lactose Anhydrous, Magnesium Stearate, Sodium Starch Glycolate.</Description>
</NDC>
<NDC>
<NDCCode>16729-318-01</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (16729-318-01) </PackageDescription>
<NDC11Code>16729-0318-01</NDC11Code>
<ProductNDC>16729-318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxybutynin Chloride</ProprietaryName>
<NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207138</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxybutynin chloride extended-release tablets are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).</IndicationAndUsage>
<Description>Oxybutynin chloride extended-release tablet, USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet, USP contains 5 mg, 10 mg, or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride is d,l (racemic) 4-diethylamino-2-butynyl phenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride is C 22H 31NO 3HCl. Its structural formula is. Oxybutynin chloride is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablets, USP contains the following inert ingredients: colloidal anhydrous silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer type-c, microcrystalline cellulose, polyethylene glycol, sodium bicarbonate, sodium lauryl sulfate, talc, titanium dioxide, triethyl citrate. Coloring agents are ferric oxide yellow (in all strengths), ferric oxide red (in 5 mg and 10 mg only) and ferric oxide black (in 15 mg only). System Components and Performance. Oxybutynin chloride extended-release tablets, USP are formulated to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet surrounded by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases drug at a controlled rate via diffusion and/or erosion. Oxybutynin chloride extended-release tablets, USP meets USP dissolution test 5.</Description>
</NDC>
<NDC>
<NDCCode>16729-318-16</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (16729-318-16) </PackageDescription>
<NDC11Code>16729-0318-16</NDC11Code>
<ProductNDC>16729-318</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxybutynin Chloride</ProprietaryName>
<NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207138</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxybutynin chloride extended-release tablets are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).</IndicationAndUsage>
<Description>Oxybutynin chloride extended-release tablet, USP is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet, USP contains 5 mg, 10 mg, or 15 mg of oxybutynin chloride USP, formulated as a once-a-day controlled-release tablet for oral administration. Oxybutynin chloride is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride is d,l (racemic) 4-diethylamino-2-butynyl phenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride is C 22H 31NO 3HCl. Its structural formula is. Oxybutynin chloride is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablets, USP contains the following inert ingredients: colloidal anhydrous silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer type-c, microcrystalline cellulose, polyethylene glycol, sodium bicarbonate, sodium lauryl sulfate, talc, titanium dioxide, triethyl citrate. Coloring agents are ferric oxide yellow (in all strengths), ferric oxide red (in 5 mg and 10 mg only) and ferric oxide black (in 15 mg only). System Components and Performance. Oxybutynin chloride extended-release tablets, USP are formulated to deliver oxybutynin chloride at a controlled rate over approximately 24 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet surrounded by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases drug at a controlled rate via diffusion and/or erosion. Oxybutynin chloride extended-release tablets, USP meets USP dissolution test 5.</Description>
</NDC>
</NDCList>