{
"NDC": [
{
"NDCCode": "49288-0378-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0378-2)",
"NDC11Code": "49288-0378-02",
"ProductNDC": "49288-0378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Peach",
"NonProprietaryName": "Peach",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "PEACH",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0378-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0378-5)",
"NDC11Code": "49288-0378-05",
"ProductNDC": "49288-0378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Peach",
"NonProprietaryName": "Peach",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "PEACH",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0378-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0378-1)",
"NDC11Code": "49288-0378-01",
"ProductNDC": "49288-0378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Peach",
"NonProprietaryName": "Peach",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "PEACH",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0378-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0378-3)",
"NDC11Code": "49288-0378-03",
"ProductNDC": "49288-0378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Peach",
"NonProprietaryName": "Peach",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "PEACH",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0378-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0378-4)",
"NDC11Code": "49288-0378-04",
"ProductNDC": "49288-0378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Peach",
"NonProprietaryName": "Peach",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "PEACH",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "0078-0378-42",
"PackageDescription": "8 PATCH in 1 CARTON (0078-0378-42) > 3.5 d in 1 PATCH",
"NDC11Code": "00078-0378-42",
"ProductNDC": "0078-0378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Combipatch",
"NonProprietaryName": "Estradiol And Norethindrone Acetate",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20000101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020870",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL; NORETHINDRONE ACETATE",
"StrengthNumber": ".05; .25",
"StrengthUnit": "mg/d; mg/d",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA],Progesterone Congeners [Chemical/Ingredient],Progestin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-09-19"
},
{
"NDCCode": "0078-0378-45",
"PackageDescription": "24 POUCH in 1 CARTON (0078-0378-45) > 3.5 d in 1 POUCH",
"NDC11Code": "00078-0378-45",
"ProductNDC": "0078-0378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Combipatch",
"NonProprietaryName": "Estradiol And Norethindrone Acetate",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20000101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020870",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL; NORETHINDRONE ACETATE",
"StrengthNumber": ".05; .25",
"StrengthUnit": "mg/d; mg/d",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA],Progesterone Congeners [Chemical/Ingredient],Progestin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-09-19"
},
{
"NDCCode": "0078-0378-62",
"PackageDescription": "3.5 d in 1 PATCH (0078-0378-62)",
"NDC11Code": "00078-0378-62",
"ProductNDC": "0078-0378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Combipatch",
"NonProprietaryName": "Estradiol And Norethindrone Acetate",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20000101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020870",
"LabelerName": "Novartis Pharmaceuticals Corporation",
"SubstanceName": "ESTRADIOL; NORETHINDRONE ACETATE",
"StrengthNumber": ".05; .25",
"StrengthUnit": "mg/d; mg/d",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA],Progesterone Congeners [Chemical/Ingredient],Progestin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-09-19"
},
{
"NDCCode": "0378-0896-55",
"PackageDescription": "1 TUBE in 1 CARTON (0378-0896-55) / 5 g in 1 TUBE",
"NDC11Code": "00378-0896-55",
"ProductNDC": "0378-0896",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penciclovir",
"NonProprietaryName": "Penciclovir",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20221116",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020629",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "PENCICLOVIR",
"StrengthNumber": "10",
"StrengthUnit": "mg/g",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Active",
"LastUpdate": "2025-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221116",
"SamplePackage": "N",
"IndicationAndUsage": "Penciclovir cream is a deoxynucleoside analog HSV DNA polymerase inhibitor indicated for the treatment of recurrent herpes labialis (cold sores) in adults and children 12 years of age or older.",
"Description": "Penciclovir cream 1% contains penciclovir, an antiviral agent active against herpes viruses. Penciclovir cream is available for topical administration as a 1% white cream. Each gram of penciclovir cream contains 10 mg of penciclovir and the following inactive ingredients: cetostearyl alcohol, mineral oil, polyoxyl 20 cetostearyl ether, propylene glycol, purified water and white petrolatum. Chemically, penciclovir is known as 9-[4-hydroxy-3-(hydroxymethyl)butyl] guanine. Its molecular formula is C10H15N5O3; its molecular weight is 253.26. It is a synthetic acyclic guanine derivative and has the following structure. Penciclovir is a white to pale yellow solid. At 20°C it has a solubility of 0.2 mg/mL in methanol, 1.3 mg/mL in propylene glycol, and 1.7 mg/mL in water. In aqueous buffer (pH 2) the solubility is 10.0 mg/mL. Penciclovir is not hygroscopic. Its partition coefficient in n-octanol/water at pH 7.5 is 0.024 (logP = -1.62)."
},
{
"NDCCode": "0378-4619-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4619-26) / 1 PATCH in 1 POUCH (0378-4619-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4619-26",
"ProductNDC": "0378-4619",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20181101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206685",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for:.",
"Description": "Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-4620-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4620-26) / 1 PATCH in 1 POUCH (0378-4620-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4620-26",
"ProductNDC": "0378-4620",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20181101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206685",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for:.",
"Description": "Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-4621-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4621-26) / 1 PATCH in 1 POUCH (0378-4621-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4621-26",
"ProductNDC": "0378-4621",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20181101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206685",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for:.",
"Description": "Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-4622-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4622-26) / 1 PATCH in 1 POUCH (0378-4622-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4622-26",
"ProductNDC": "0378-4622",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20181101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206685",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for:.",
"Description": "Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-4623-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4623-26) / 1 PATCH in 1 POUCH (0378-4623-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4623-26",
"ProductNDC": "0378-4623",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20181101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206685",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181101",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for:.",
"Description": "Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-4640-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4640-26) / 1 PATCH in 1 POUCH (0378-4640-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4640-26",
"ProductNDC": "0378-4640",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201675",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141219",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for.",
"Description": "Estradiol Transdermal System, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone and oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-4641-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4641-26) / 1 PATCH in 1 POUCH (0378-4641-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4641-26",
"ProductNDC": "0378-4641",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201675",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141219",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for.",
"Description": "Estradiol Transdermal System, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone and oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-4642-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4642-26) / 1 PATCH in 1 POUCH (0378-4642-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4642-26",
"ProductNDC": "0378-4642",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201675",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141219",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for.",
"Description": "Estradiol Transdermal System, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone and oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-4643-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4643-26) / 1 PATCH in 1 POUCH (0378-4643-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4643-26",
"ProductNDC": "0378-4643",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201675",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141219",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for.",
"Description": "Estradiol Transdermal System, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone and oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-4644-26",
"PackageDescription": "8 POUCH in 1 CARTON (0378-4644-26) / 1 PATCH in 1 POUCH (0378-4644-16) / 3.5 d in 1 PATCH",
"NDC11Code": "00378-4644-26",
"ProductNDC": "0378-4644",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20141219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201675",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141219",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system (twice-weekly) is indicated for.",
"Description": "Estradiol Transdermal System, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone and oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive."
},
{
"NDCCode": "0378-5260-98",
"PackageDescription": "5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5260-98)",
"NDC11Code": "00378-5260-98",
"ProductNDC": "0378-5260",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temozolomide",
"NonProprietaryName": "Temozolomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205227",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "TEMOZOLOMIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA],Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-04-03",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0378-5261-98",
"PackageDescription": "5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5261-98)",
"NDC11Code": "00378-5261-98",
"ProductNDC": "0378-5261",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temozolomide",
"NonProprietaryName": "Temozolomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205227",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "TEMOZOLOMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA],Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-04-03",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0378-5262-98",
"PackageDescription": "5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5262-98)",
"NDC11Code": "00378-5262-98",
"ProductNDC": "0378-5262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temozolomide",
"NonProprietaryName": "Temozolomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205227",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "TEMOZOLOMIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA],Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-03-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0378-5263-98",
"PackageDescription": "5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5263-98)",
"NDC11Code": "00378-5263-98",
"ProductNDC": "0378-5263",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temozolomide",
"NonProprietaryName": "Temozolomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205227",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "TEMOZOLOMIDE",
"StrengthNumber": "140",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA],Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-03-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0378-5264-98",
"PackageDescription": "5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5264-98)",
"NDC11Code": "00378-5264-98",
"ProductNDC": "0378-5264",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temozolomide",
"NonProprietaryName": "Temozolomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205227",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "TEMOZOLOMIDE",
"StrengthNumber": "180",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA],Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-03-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0378-5265-98",
"PackageDescription": "5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5265-98)",
"NDC11Code": "00378-5265-98",
"ProductNDC": "0378-5265",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temozolomide",
"NonProprietaryName": "Temozolomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160629",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205227",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "TEMOZOLOMIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA],Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-03-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0378-5431-35",
"PackageDescription": "1 BOTTLE in 1 CARTON (0378-5431-35) > 2.5 mL in 1 BOTTLE",
"NDC11Code": "00378-5431-35",
"ProductNDC": "0378-5431",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gatifloxacin",
"NonProprietaryName": "Gatifloxacin",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20190308",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206446",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "GATIFLOXACIN",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Quinolone Antimicrobial [EPC],Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20190308",
"SamplePackage": "N"
},
{
"NDCCode": "0378-6981-88",
"PackageDescription": "2 CARTON in 1 BOX (0378-6981-88) / 5 BLISTER PACK in 1 CARTON (0378-6981-85) / 10 TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE in 1 BLISTER PACK (0378-6981-32) ",
"NDC11Code": "00378-6981-88",
"ProductNDC": "0378-6981",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lansoprazole",
"NonProprietaryName": "Lansoprazole",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20181129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202396",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "LANSOPRAZOLE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181129",
"SamplePackage": "N",
"IndicationAndUsage": "Lansoprazole delayed-release orally disintegrating tablets are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).",
"Description": "The active ingredient in lansoprazole delayed-release orally disintegrating tablets is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoro-ethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole, USP is a white to brownish-white powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release orally disintegrating tablets for oral administration. Lansoprazole delayed-release orally disintegrating tablets are available in two dosage strengths: 15 and 30 mg of lansoprazole per tablet. Each delayed-release orally disintegrating tablet contains enteric-coated pellets consisting of 15 or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: artificial strawberry flavor, aspartame1, citric acid monohydrate, crospovidone, hydroxypropyl cellulose, magnesium carbonate, magnesium stearate, mannitol, methacrylic acid copolymer type C, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium bicarbonate, sodium hydroxide, sodium lauryl sulfate, sodium starch glycolate (potato), sugar spheres (corn starch and sucrose), talc, triethyl citrate and yellow iron oxide. 1Phenylketonurics:Lansoprazole delayed-release orally disintegrating tablets contain phenylalanine 3.37 mg per 15 mg tablet and 6.74 mg per 30 mg tablet."
},
{
"NDCCode": "0378-6982-88",
"PackageDescription": "2 CARTON in 1 BOX (0378-6982-88) / 5 BLISTER PACK in 1 CARTON (0378-6982-85) / 10 TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE in 1 BLISTER PACK (0378-6982-32) ",
"NDC11Code": "00378-6982-88",
"ProductNDC": "0378-6982",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lansoprazole",
"NonProprietaryName": "Lansoprazole",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20181129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202396",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "LANSOPRAZOLE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181129",
"SamplePackage": "N",
"IndicationAndUsage": "Lansoprazole delayed-release orally disintegrating tablets are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).",
"Description": "The active ingredient in lansoprazole delayed-release orally disintegrating tablets is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoro-ethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole, USP is a white to brownish-white powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release orally disintegrating tablets for oral administration. Lansoprazole delayed-release orally disintegrating tablets are available in two dosage strengths: 15 and 30 mg of lansoprazole per tablet. Each delayed-release orally disintegrating tablet contains enteric-coated pellets consisting of 15 or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: artificial strawberry flavor, aspartame1, citric acid monohydrate, crospovidone, hydroxypropyl cellulose, magnesium carbonate, magnesium stearate, mannitol, methacrylic acid copolymer type C, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium bicarbonate, sodium hydroxide, sodium lauryl sulfate, sodium starch glycolate (potato), sugar spheres (corn starch and sucrose), talc, triethyl citrate and yellow iron oxide. 1Phenylketonurics:Lansoprazole delayed-release orally disintegrating tablets contain phenylalanine 3.37 mg per 15 mg tablet and 6.74 mg per 30 mg tablet."
},
{
"NDCCode": "0378-6988-58",
"PackageDescription": "6 POUCH in 1 CARTON (0378-6988-58) > 5 VIAL in 1 POUCH > 3 mL in 1 VIAL",
"NDC11Code": "00378-6988-58",
"ProductNDC": "0378-6988",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"NonProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20010321",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020950",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE; ALBUTEROL SULFATE",
"StrengthNumber": ".5; 3",
"StrengthUnit": "mg/3mL; mg/3mL",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA],Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0378-6988-91",
"PackageDescription": "12 POUCH in 1 CARTON (0378-6988-91) > 5 VIAL in 1 POUCH > 3 mL in 1 VIAL",
"NDC11Code": "00378-6988-91",
"ProductNDC": "0378-6988",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"NonProprietaryName": "Ipratropium Bromide And Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20010321",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020950",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "IPRATROPIUM BROMIDE; ALBUTEROL SULFATE",
"StrengthNumber": ".5; 3",
"StrengthUnit": "mg/3mL; mg/3mL",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA],Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0378-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0378-2)</PackageDescription>
<NDC11Code>49288-0378-02</NDC11Code>
<ProductNDC>49288-0378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Peach</ProprietaryName>
<NonProprietaryName>Peach</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>PEACH</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0378-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0378-5)</PackageDescription>
<NDC11Code>49288-0378-05</NDC11Code>
<ProductNDC>49288-0378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Peach</ProprietaryName>
<NonProprietaryName>Peach</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>PEACH</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0378-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0378-1)</PackageDescription>
<NDC11Code>49288-0378-01</NDC11Code>
<ProductNDC>49288-0378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Peach</ProprietaryName>
<NonProprietaryName>Peach</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>PEACH</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0378-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0378-3)</PackageDescription>
<NDC11Code>49288-0378-03</NDC11Code>
<ProductNDC>49288-0378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Peach</ProprietaryName>
<NonProprietaryName>Peach</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>PEACH</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0378-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0378-4)</PackageDescription>
<NDC11Code>49288-0378-04</NDC11Code>
<ProductNDC>49288-0378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Peach</ProprietaryName>
<NonProprietaryName>Peach</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>PEACH</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>0078-0378-42</NDCCode>
<PackageDescription>8 PATCH in 1 CARTON (0078-0378-42) > 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00078-0378-42</NDC11Code>
<ProductNDC>0078-0378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Combipatch</ProprietaryName>
<NonProprietaryName>Estradiol And Norethindrone Acetate</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20000101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020870</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL; NORETHINDRONE ACETATE</SubstanceName>
<StrengthNumber>.05; .25</StrengthNumber>
<StrengthUnit>mg/d; mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA],Progesterone Congeners [Chemical/Ingredient],Progestin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-09-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>0078-0378-45</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (0078-0378-45) > 3.5 d in 1 POUCH</PackageDescription>
<NDC11Code>00078-0378-45</NDC11Code>
<ProductNDC>0078-0378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Combipatch</ProprietaryName>
<NonProprietaryName>Estradiol And Norethindrone Acetate</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20000101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020870</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL; NORETHINDRONE ACETATE</SubstanceName>
<StrengthNumber>.05; .25</StrengthNumber>
<StrengthUnit>mg/d; mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA],Progesterone Congeners [Chemical/Ingredient],Progestin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-09-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>0078-0378-62</NDCCode>
<PackageDescription>3.5 d in 1 PATCH (0078-0378-62)</PackageDescription>
<NDC11Code>00078-0378-62</NDC11Code>
<ProductNDC>0078-0378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Combipatch</ProprietaryName>
<NonProprietaryName>Estradiol And Norethindrone Acetate</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20000101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020870</ApplicationNumber>
<LabelerName>Novartis Pharmaceuticals Corporation</LabelerName>
<SubstanceName>ESTRADIOL; NORETHINDRONE ACETATE</SubstanceName>
<StrengthNumber>.05; .25</StrengthNumber>
<StrengthUnit>mg/d; mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA],Progesterone Congeners [Chemical/Ingredient],Progestin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-09-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>0378-0896-55</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0378-0896-55) / 5 g in 1 TUBE</PackageDescription>
<NDC11Code>00378-0896-55</NDC11Code>
<ProductNDC>0378-0896</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penciclovir</ProprietaryName>
<NonProprietaryName>Penciclovir</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20221116</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020629</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PENCICLOVIR</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Penciclovir cream is a deoxynucleoside analog HSV DNA polymerase inhibitor indicated for the treatment of recurrent herpes labialis (cold sores) in adults and children 12 years of age or older.</IndicationAndUsage>
<Description>Penciclovir cream 1% contains penciclovir, an antiviral agent active against herpes viruses. Penciclovir cream is available for topical administration as a 1% white cream. Each gram of penciclovir cream contains 10 mg of penciclovir and the following inactive ingredients: cetostearyl alcohol, mineral oil, polyoxyl 20 cetostearyl ether, propylene glycol, purified water and white petrolatum. Chemically, penciclovir is known as 9-[4-hydroxy-3-(hydroxymethyl)butyl] guanine. Its molecular formula is C10H15N5O3; its molecular weight is 253.26. It is a synthetic acyclic guanine derivative and has the following structure. Penciclovir is a white to pale yellow solid. At 20°C it has a solubility of 0.2 mg/mL in methanol, 1.3 mg/mL in propylene glycol, and 1.7 mg/mL in water. In aqueous buffer (pH 2) the solubility is 10.0 mg/mL. Penciclovir is not hygroscopic. Its partition coefficient in n-octanol/water at pH 7.5 is 0.024 (logP = -1.62).</Description>
</NDC>
<NDC>
<NDCCode>0378-4619-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4619-26) / 1 PATCH in 1 POUCH (0378-4619-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4619-26</NDC11Code>
<ProductNDC>0378-4619</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20181101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206685</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for:.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-4620-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4620-26) / 1 PATCH in 1 POUCH (0378-4620-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4620-26</NDC11Code>
<ProductNDC>0378-4620</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20181101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206685</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for:.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-4621-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4621-26) / 1 PATCH in 1 POUCH (0378-4621-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4621-26</NDC11Code>
<ProductNDC>0378-4621</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20181101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206685</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for:.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-4622-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4622-26) / 1 PATCH in 1 POUCH (0378-4622-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4622-26</NDC11Code>
<ProductNDC>0378-4622</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20181101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206685</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for:.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-4623-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4623-26) / 1 PATCH in 1 POUCH (0378-4623-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4623-26</NDC11Code>
<ProductNDC>0378-4623</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20181101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206685</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for:.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm² and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of three layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin backing film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone, oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-4640-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4640-26) / 1 PATCH in 1 POUCH (0378-4640-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4640-26</NDC11Code>
<ProductNDC>0378-4640</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201675</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol Transdermal System, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone and oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-4641-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4641-26) / 1 PATCH in 1 POUCH (0378-4641-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4641-26</NDC11Code>
<ProductNDC>0378-4641</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201675</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol Transdermal System, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone and oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-4642-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4642-26) / 1 PATCH in 1 POUCH (0378-4642-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4642-26</NDC11Code>
<ProductNDC>0378-4642</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201675</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol Transdermal System, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone and oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-4643-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4643-26) / 1 PATCH in 1 POUCH (0378-4643-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4643-26</NDC11Code>
<ProductNDC>0378-4643</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201675</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol Transdermal System, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone and oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-4644-26</NDCCode>
<PackageDescription>8 POUCH in 1 CARTON (0378-4644-26) / 1 PATCH in 1 POUCH (0378-4644-16) / 3.5 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-4644-26</NDC11Code>
<ProductNDC>0378-4644</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20141219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201675</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system (twice-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol Transdermal System, USP (twice-weekly) contains estradiol hemihydrate in a multipolymeric adhesive. The system is designed to release estradiol continuously upon application to intact skin. Five dosage strengths of estradiol transdermal system (twice-weekly) are available to provide nominal in vivo delivery rates of 0.025, 0.0375, 0.05, 0.075, or 0.1 mg of estradiol per day via the skin. Each corresponding system has an active surface area of 2.5, 3.75, 5.0, 7.5, or 10.0 cm2 and contains estradiol, USP hemihydrate equivalent to 0.41, 0.62, 0.82, 1.23, or 1.64 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. The structural formula is. The molecular formula of estradiol hemihydrate is C18H24O2 ½ H2O. The molecular weight is 281.39. Meets USP Drug Release Test 4. Estradiol transdermal system (twice-weekly) is comprised of 3 layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a translucent polyolefin film printed with brown ink, (2) an adhesive formulation containing estradiol, silicone adhesive, acrylic adhesive, dipropylene glycol, povidone and oleyl alcohol, and (3) an oversized slit polyester release liner which is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-5260-98</NDCCode>
<PackageDescription>5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5260-98)</PackageDescription>
<NDC11Code>00378-5260-98</NDC11Code>
<ProductNDC>0378-5260</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temozolomide</ProprietaryName>
<NonProprietaryName>Temozolomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205227</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TEMOZOLOMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA],Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-04-03</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0378-5261-98</NDCCode>
<PackageDescription>5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5261-98)</PackageDescription>
<NDC11Code>00378-5261-98</NDC11Code>
<ProductNDC>0378-5261</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temozolomide</ProprietaryName>
<NonProprietaryName>Temozolomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205227</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TEMOZOLOMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA],Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-04-03</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0378-5262-98</NDCCode>
<PackageDescription>5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5262-98)</PackageDescription>
<NDC11Code>00378-5262-98</NDC11Code>
<ProductNDC>0378-5262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temozolomide</ProprietaryName>
<NonProprietaryName>Temozolomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205227</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TEMOZOLOMIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA],Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0378-5263-98</NDCCode>
<PackageDescription>5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5263-98)</PackageDescription>
<NDC11Code>00378-5263-98</NDC11Code>
<ProductNDC>0378-5263</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temozolomide</ProprietaryName>
<NonProprietaryName>Temozolomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205227</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TEMOZOLOMIDE</SubstanceName>
<StrengthNumber>140</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA],Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0378-5264-98</NDCCode>
<PackageDescription>5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5264-98)</PackageDescription>
<NDC11Code>00378-5264-98</NDC11Code>
<ProductNDC>0378-5264</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temozolomide</ProprietaryName>
<NonProprietaryName>Temozolomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205227</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TEMOZOLOMIDE</SubstanceName>
<StrengthNumber>180</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA],Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0378-5265-98</NDCCode>
<PackageDescription>5 CAPSULE in 1 BOTTLE, PLASTIC (0378-5265-98)</PackageDescription>
<NDC11Code>00378-5265-98</NDC11Code>
<ProductNDC>0378-5265</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temozolomide</ProprietaryName>
<NonProprietaryName>Temozolomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160629</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205227</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TEMOZOLOMIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA],Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0378-5431-35</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0378-5431-35) > 2.5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>00378-5431-35</NDC11Code>
<ProductNDC>0378-5431</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gatifloxacin</ProprietaryName>
<NonProprietaryName>Gatifloxacin</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20190308</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206446</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>GATIFLOXACIN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC],Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190308</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0378-6981-88</NDCCode>
<PackageDescription>2 CARTON in 1 BOX (0378-6981-88) / 5 BLISTER PACK in 1 CARTON (0378-6981-85) / 10 TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE in 1 BLISTER PACK (0378-6981-32) </PackageDescription>
<NDC11Code>00378-6981-88</NDC11Code>
<ProductNDC>0378-6981</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lansoprazole</ProprietaryName>
<NonProprietaryName>Lansoprazole</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202396</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LANSOPRAZOLE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lansoprazole delayed-release orally disintegrating tablets are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).</IndicationAndUsage>
<Description>The active ingredient in lansoprazole delayed-release orally disintegrating tablets is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoro-ethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole, USP is a white to brownish-white powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release orally disintegrating tablets for oral administration. Lansoprazole delayed-release orally disintegrating tablets are available in two dosage strengths: 15 and 30 mg of lansoprazole per tablet. Each delayed-release orally disintegrating tablet contains enteric-coated pellets consisting of 15 or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: artificial strawberry flavor, aspartame1, citric acid monohydrate, crospovidone, hydroxypropyl cellulose, magnesium carbonate, magnesium stearate, mannitol, methacrylic acid copolymer type C, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium bicarbonate, sodium hydroxide, sodium lauryl sulfate, sodium starch glycolate (potato), sugar spheres (corn starch and sucrose), talc, triethyl citrate and yellow iron oxide. 1Phenylketonurics:Lansoprazole delayed-release orally disintegrating tablets contain phenylalanine 3.37 mg per 15 mg tablet and 6.74 mg per 30 mg tablet.</Description>
</NDC>
<NDC>
<NDCCode>0378-6982-88</NDCCode>
<PackageDescription>2 CARTON in 1 BOX (0378-6982-88) / 5 BLISTER PACK in 1 CARTON (0378-6982-85) / 10 TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE in 1 BLISTER PACK (0378-6982-32) </PackageDescription>
<NDC11Code>00378-6982-88</NDC11Code>
<ProductNDC>0378-6982</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lansoprazole</ProprietaryName>
<NonProprietaryName>Lansoprazole</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202396</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LANSOPRAZOLE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lansoprazole delayed-release orally disintegrating tablets are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).</IndicationAndUsage>
<Description>The active ingredient in lansoprazole delayed-release orally disintegrating tablets is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoro-ethoxy)-2-pyridinyl]methyl]sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole, USP is a white to brownish-white powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release orally disintegrating tablets for oral administration. Lansoprazole delayed-release orally disintegrating tablets are available in two dosage strengths: 15 and 30 mg of lansoprazole per tablet. Each delayed-release orally disintegrating tablet contains enteric-coated pellets consisting of 15 or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: artificial strawberry flavor, aspartame1, citric acid monohydrate, crospovidone, hydroxypropyl cellulose, magnesium carbonate, magnesium stearate, mannitol, methacrylic acid copolymer type C, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium bicarbonate, sodium hydroxide, sodium lauryl sulfate, sodium starch glycolate (potato), sugar spheres (corn starch and sucrose), talc, triethyl citrate and yellow iron oxide. 1Phenylketonurics:Lansoprazole delayed-release orally disintegrating tablets contain phenylalanine 3.37 mg per 15 mg tablet and 6.74 mg per 30 mg tablet.</Description>
</NDC>
<NDC>
<NDCCode>0378-6988-58</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (0378-6988-58) > 5 VIAL in 1 POUCH > 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>00378-6988-58</NDC11Code>
<ProductNDC>0378-6988</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20010321</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020950</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.5; 3</StrengthNumber>
<StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA],Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0378-6988-91</NDCCode>
<PackageDescription>12 POUCH in 1 CARTON (0378-6988-91) > 5 VIAL in 1 POUCH > 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>00378-6988-91</NDC11Code>
<ProductNDC>0378-6988</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20010321</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020950</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.5; 3</StrengthNumber>
<StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA],Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
</NDCList>