{
"NDC": [
{
"NDCCode": "49288-0404-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0404-3)",
"NDC11Code": "49288-0404-03",
"ProductNDC": "49288-0404",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pimento",
"NonProprietaryName": "Pimento",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "RED BELL PEPPER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0404-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0404-1)",
"NDC11Code": "49288-0404-01",
"ProductNDC": "49288-0404",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pimento",
"NonProprietaryName": "Pimento",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "RED BELL PEPPER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0404-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0404-2)",
"NDC11Code": "49288-0404-02",
"ProductNDC": "49288-0404",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pimento",
"NonProprietaryName": "Pimento",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "RED BELL PEPPER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0404-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0404-4)",
"NDC11Code": "49288-0404-04",
"ProductNDC": "49288-0404",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pimento",
"NonProprietaryName": "Pimento",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "RED BELL PEPPER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0404-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0404-5)",
"NDC11Code": "49288-0404-05",
"ProductNDC": "49288-0404",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pimento",
"NonProprietaryName": "Pimento",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "RED BELL PEPPER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "0404-0119-01",
"PackageDescription": "1000 POUCH in 1 CASE (0404-0119-01) / 1 APPLICATOR in 1 POUCH / 2.3 mL in 1 APPLICATOR",
"NDC11Code": "00404-0119-01",
"ProductNDC": "0404-0119",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Henry Schein Povidone-iodine Swabsticks",
"NonProprietaryName": "Povidone-iodine",
"DosageFormName": "SWAB",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191022",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "POVIDONE-IODINE",
"StrengthNumber": "1",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2023-10-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191022",
"SamplePackage": "N",
"IndicationAndUsage": "Patient preoperative skin preparation: Helps to reduce bacteria that potentially can cause skin infection."
},
{
"NDCCode": "0404-0120-03",
"PackageDescription": "500 POUCH in 1 CASE (0404-0120-03) / 3 APPLICATOR in 1 POUCH / 1.8 mL in 1 APPLICATOR",
"NDC11Code": "00404-0120-03",
"ProductNDC": "0404-0120",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Henry Schein Povidone-iodine Swabsticks",
"NonProprietaryName": "Povidone-iodine",
"DosageFormName": "SWAB",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191022",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "POVIDONE-IODINE",
"StrengthNumber": "1",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2023-10-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191022",
"SamplePackage": "N",
"IndicationAndUsage": "Patient preoperative skin preparation: Helps to reduce bacteria that potentially can cause skin infection."
},
{
"NDCCode": "0404-4438-03",
"PackageDescription": "3.785 L in 1 BOTTLE (0404-4438-03) ",
"NDC11Code": "00404-4438-03",
"ProductNDC": "0404-4438",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Antibacterial Hand",
"NonProprietaryName": "Chloroxylenol",
"DosageFormName": "SOAP",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130130",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "CHLOROXYLENOL",
"StrengthNumber": "6.1",
"StrengthUnit": "g/L",
"Status": "Active",
"LastUpdate": "2025-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130130",
"SamplePackage": "N",
"IndicationAndUsage": "For handwashing to decrease bacteria on skin. Recommended for repeated use."
},
{
"NDCCode": "0404-5637-01",
"PackageDescription": "10 BOX in 1 CASE (0404-5637-01) > 100 POUCH in 1 BOX > .3 mL in 1 POUCH",
"NDC11Code": "00404-5637-01",
"ProductNDC": "0404-5637",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Povidine Iodine",
"NonProprietaryName": "Povidine Iodine",
"DosageFormName": "SWAB",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110317",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333C",
"LabelerName": "Henry Schein Inc",
"SubstanceName": "POVIDONE-IODINE",
"StrengthNumber": "10",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "For use as an : 1 first aid antiseptic , 2 pre-operative skin preperation."
},
{
"NDCCode": "0404-5638-01",
"PackageDescription": "10 BOX in 1 CASE (0404-5638-01) > 50 POUCH in 1 BOX > 1 POUCH in 1 POUCH > .3 mL in 1 POUCH",
"NDC11Code": "00404-5638-01",
"ProductNDC": "0404-5638",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Povidine Iodine",
"NonProprietaryName": "Povidine Iodine",
"DosageFormName": "SWAB",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110317",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333C",
"LabelerName": "Henry Schein Inc",
"SubstanceName": "POVIDONE-IODINE",
"StrengthNumber": "10",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "For use as an : 1 first aid antiseptic , 2 pre-operative skin preperation."
},
{
"NDCCode": "0404-5639-01",
"PackageDescription": "10 BOX in 1 CASE (0404-5639-01) > 25 POUCH in 1 BOX > 3 POUCH in 1 POUCH > .9 mL in 1 POUCH",
"NDC11Code": "00404-5639-01",
"ProductNDC": "0404-5639",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Povidine Iodine",
"NonProprietaryName": "Povidine Iodine",
"DosageFormName": "SWAB",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110317",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333C",
"LabelerName": "Henry Schein Inc",
"SubstanceName": "POVIDONE-IODINE",
"StrengthNumber": "10",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "For use as an : 1 first aid antiseptic , 2 pre-operative skin preperation."
},
{
"NDCCode": "0404-7191-01",
"PackageDescription": "1 TUBE in 1 CARTON (0404-7191-01) > 3.5 g in 1 TUBE",
"NDC11Code": "00404-7191-01",
"ProductNDC": "0404-7191",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erythromycin",
"NonProprietaryName": "Erythromycin",
"DosageFormName": "OINTMENT",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20150513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064030",
"LabelerName": "Henry Schein Inc.",
"SubstanceName": "ERYTHROMYCIN",
"StrengthNumber": "5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150513",
"SamplePackage": "N"
},
{
"NDCCode": "0404-7194-01",
"PackageDescription": "1 TUBE in 1 CARTON (0404-7194-01) > 3.5 g in 1 TUBE",
"NDC11Code": "00404-7194-01",
"ProductNDC": "0404-7194",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neomycin And Polymyxin B Sulfates, And Bacitracin Zinc",
"NonProprietaryName": "Neomycin Sulfate, Polymyxin B Sulfate And Bacitracin Zinc",
"DosageFormName": "OINTMENT",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20150513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065088",
"LabelerName": "Henry Schein Inc.",
"SubstanceName": "BACITRACIN ZINC; NEOMYCIN SULFATE; POLYMYXIN B SULFATE",
"StrengthNumber": "400; 3.5; 10000",
"StrengthUnit": "[USP'U]/g; mg/g; [USP'U]/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150513",
"SamplePackage": "N"
},
{
"NDCCode": "0404-7195-01",
"PackageDescription": "1 TUBE in 1 CARTON (0404-7195-01) > 3.5 g in 1 TUBE",
"NDC11Code": "00404-7195-01",
"ProductNDC": "0404-7195",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neomycin And Polymyxin B Sulfates, Bacitracin Zinc, And Hydrocortisone",
"NonProprietaryName": "Neomycin Sulfate, Polymyxin B Sulfate, Bacitracin Zinc And Hydrocortisone",
"DosageFormName": "OINTMENT",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20150513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065213",
"LabelerName": "Henry Schein Inc.",
"SubstanceName": "BACITRACIN ZINC; HYDROCORTISONE; NEOMYCIN SULFATE; POLYMYXIN B SULFATE",
"StrengthNumber": "400; 10; 3.5; 10000",
"StrengthUnit": "[USP'U]/g; mg/g; mg/g; [USP'U]/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150513",
"SamplePackage": "N"
},
{
"NDCCode": "0404-9034-03",
"PackageDescription": "3 BOTTLE, PUMP in 1 CASE (0404-9034-03) > 1890 mL in 1 BOTTLE, PUMP (0404-9034-01) ",
"NDC11Code": "00404-9034-03",
"ProductNDC": "0404-9034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acclean",
"ProprietaryNameSuffix": "Dual Fluoride Rinse Part B 1.24% Mint",
"NonProprietaryName": "Fluoride",
"DosageFormName": "LIQUID",
"RouteName": "DENTAL",
"StartMarketingDate": "20170303",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Henry Schein",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": ".02522",
"StrengthUnit": "g/mL",
"Status": "Deprecated",
"LastUpdate": "2020-12-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170303",
"SamplePackage": "N"
},
{
"NDCCode": "0404-9035-03",
"PackageDescription": "3 BOTTLE, PUMP in 1 CASE (0404-9035-03) > 1890 mL in 1 BOTTLE, PUMP (0404-9035-01) ",
"NDC11Code": "00404-9035-03",
"ProductNDC": "0404-9035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acclean",
"ProprietaryNameSuffix": "Dual Fluoride Rinse 1.24% Apf Bubblegum",
"NonProprietaryName": "Fluoride",
"DosageFormName": "LIQUID",
"RouteName": "DENTAL",
"StartMarketingDate": "20170303",
"EndMarketingDate": "20201231",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Henry Schein",
"SubstanceName": "SODIUM FLUORIDE",
"StrengthNumber": ".02522",
"StrengthUnit": "g/mL",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170303",
"EndMarketingDatePackage": "20201231",
"SamplePackage": "N"
},
{
"NDCCode": "0404-9772-03",
"PackageDescription": "1 VIAL in 1 BAG (0404-9772-03) / 3 mL in 1 VIAL",
"NDC11Code": "00404-9772-03",
"ProductNDC": "0404-9772",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251029",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077234",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251029",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone Hydrochloride Injection, USP is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone Hydrochloride Injection, USP also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with Amiodarone Hydrochloride Injection, USP patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use Amiodarone Hydrochloride Injection, USP for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but Amiodarone Hydrochloride Injection may be safely administered for longer periods if necessary.",
"Description": "Amiodarone Hydrochloride Injection contains Amiodarone Hydrochloride (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone Hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone Hydrochloride has the following structural formula. Amiodarone Hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration (2)]."
},
{
"NDCCode": "0404-9815-03",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 BAG (0404-9815-03) / 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00404-9815-03",
"ProductNDC": "0404-9815",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220108",
"EndMarketingDate": "20260331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076217",
"LabelerName": "Henry Schein, Inc",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-04-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220108",
"EndMarketingDatePackage": "20260331",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.",
"Description": "Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride, USP (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see DOSAGE AND ADMINISTRATION (2)]."
},
{
"NDCCode": "0404-9834-99",
"PackageDescription": "1 VIAL in 1 BAG (0404-9834-99) / 3 mL in 1 VIAL",
"NDC11Code": "00404-9834-99",
"ProductNDC": "0404-9834",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefazolin",
"NonProprietaryName": "Cefazolin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20220109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065047",
"LabelerName": "Henry Schein, Inc.",
"SubstanceName": "CEFAZOLIN SODIUM",
"StrengthNumber": "330",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2025-10-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220109",
"SamplePackage": "N",
"IndicationAndUsage": "Cefazolin for Injection, USP is indicated in the treatment of the following serious infections due to susceptible organisms. Respiratory Tract Infections: Due to S. pneumoniae, Klebsiella species, H. influenzae, S. aureus (penicillin-sensitive and penicillin-resistant), and group A beta-hemolytic streptococci. Injectable benzathine penicillin is considered to be the drug of choice in treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cefazolin for Injection is effective in the eradication of streptococci from the nasopharynx; however, data establishing the efficacy of Cefazolin for Injection in the subsequent prevention of rheumatic fever are not available at present. Urinary Tract Infections: Due to E. coli, P. mirabilis, Klebsiella species, and some strains of enterobacter and enterococci. Skin and Skin Structure Infections: Due to S. aureus (penicillin-sensitive and penicillin-resistant), group A beta-hemolytic streptococci, and other strains of streptococci. Biliary Tract Infections: Due to E. coli, various strains of streptococci, P. mirabilis, Klebsiella species, and S. aureus. Bone and Joint Infections: Due to S. aureus. Genital Infections: (i.e., prostatitis, epididymitis) due to E. coli, P. mirabilis, Klebsiella species, and some strains of enterococci. Septicemia: Due to S. pneumoniae, S. aureus (penicillin-sensitive and penicillin-resistant), P. mirabilis, E. coli and Klebsiella species. Endocarditis: Due to S. aureus (penicillin-sensitive and penicillin-resistant) and group A beta-hemolytic streptococci. Perioperative Prophylaxis: The prophylactic administration of Cefazolin for Injection preoperatively, intraoperatively and postoperatively may reduce the incidence of certain postoperative infections in patients undergoing surgical procedures which are classified as contaminated or potentially contaminated (e.g., vaginal hysterectomy, and cholecystectomy in high-risk patients such as those older than 70 years, with acute cholecystitis, obstructive jaundice, or common duct bile stones). The perioperative use of Cefazolin for Injection may also be effective in surgical patients in whom infection at the operative site would present a serious risk (e.g., during open-heart surgery and prosthetic arthroplasty). The prophylactic administration of Cefazolin for Injection should usually be discontinued within a 24 hour period after the surgical procedure. In surgery where the occurrence of infection may be particularly devastating (e.g., open-heart surgery and prosthetic arthroplasty), the prophylactic administration of Cefazolin for Injection may be continued for 3 to 5 days following the completion of surgery. If there are signs of infection, specimens for cultures should be obtained for the identification of the causative organism so that appropriate therapy may be instituted (see DOSAGE AND ADMINISTRATION). To reduce the development of drug-resistant bacteria and maintain the effectiveness of Cefazolin for Injection, USP and other antibacterial drugs, Cefazolin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cefazolin for Injection, USP is a semi-synthetic cephalosporin for parenteral administration. It is the sodium salt of 3-{[(5-methyl-1,3,4-thiadiazol-2-yl)thio]-methyl}-8-oxo-7-[2-(1H-tetrazol-1-yl) acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid. The molecular formula is C14H13N8NaO4S3 and molecular weight is 476.49. Structural Formula. Each vial contains 48 mg of sodium/1 gram of cefazolin sodium. Cefazolin for Injection, USP is white to off-white crystalline powder, supplied in vials equivalent to 500 mg or 1 gram of cefazolin."
},
{
"NDCCode": "15631-0404-3",
"PackageDescription": "750 PELLET in 1 PACKAGE (15631-0404-3) ",
"NDC11Code": "15631-0404-03",
"ProductNDC": "15631-0404",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Silicea",
"NonProprietaryName": "Silicea",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151002",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "SILICON DIOXIDE",
"StrengthNumber": "2",
"StrengthUnit": "[hp_X]/1",
"Status": "Active",
"LastUpdate": "2021-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "37662-0404-3",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (37662-0404-3) ",
"NDC11Code": "37662-0404-03",
"ProductNDC": "37662-0404",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Chromium Metallicum",
"NonProprietaryName": "Chromium Metallicum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220608",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "CHROMIUM",
"StrengthNumber": "100",
"StrengthUnit": "[hp_C]/1",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]",
"Status": "Active",
"LastUpdate": "2022-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220608",
"SamplePackage": "N"
},
{
"NDCCode": "58443-0404-3",
"PackageDescription": "59 mL in 1 TUBE (58443-0404-3) ",
"NDC11Code": "58443-0404-03",
"ProductNDC": "58443-0404",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ulta",
"ProprietaryNameSuffix": "Broad Spectrum Spf 30",
"NonProprietaryName": "Titanium Dioxide, Zinc Oxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180316",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Prime Enterprises, Inc.",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "31.5; 31.5",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180316",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "71335-0404-3",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (71335-0404-3) ",
"NDC11Code": "71335-0404-03",
"ProductNDC": "71335-0404",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline",
"NonProprietaryName": "Sertraline",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077670",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220502",
"SamplePackage": "N"
},
{
"NDCCode": "49288-0001-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0001-3)",
"NDC11Code": "49288-0001-03",
"ProductNDC": "49288-0001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alternaria Alternata",
"NonProprietaryName": "Alternaria Alternata",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "ALTERNARIA ALTERNATA",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0002-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0002-3)",
"NDC11Code": "49288-0002-03",
"ProductNDC": "49288-0002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alternaria Alternata",
"NonProprietaryName": "Alternaria Alternata",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "ALTERNARIA ALTERNATA",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0003-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0003-3)",
"NDC11Code": "49288-0003-03",
"ProductNDC": "49288-0003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alternaria Alternata",
"NonProprietaryName": "Alternaria Alternata",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "ALTERNARIA ALTERNATA",
"StrengthNumber": ".025",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0004-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0004-3)",
"NDC11Code": "49288-0004-03",
"ProductNDC": "49288-0004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "A Mold Mixture",
"NonProprietaryName": "A Mold Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920413",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "ASPERGILLUS FLAVUS; ASPERGILLUS FUMIGATUS; ASPERGILLUS NIGER VAR. NIGER; ASPERGILLUS REPENS; BOTRYTIS CINEREA; CHAETOMIUM GLOBOSUM; EPICOCCUM NIGRUM; FUSARIUM OXYSPORUM; GEOTRICHUM CANDIDUM; COCHLIOBOLUS SATIVUS; CANDIDA TROPICALIS; NEUROSPORA INTERMEDIA; MUCOR PLUMBEUS; MUCOR RACEMOSUS; PENICILLIUM CAMEMBERTI; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM EXPANSUM; PENICILLIUM ITALICUM; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM ROQUEFORTI; PHOMA DESTRUCTIVA; AUREOBASIDIUM PULLULANS VAR. PULLUTANS; RHIZOPUS STOLONIFER; RHODOTORULA RUBRA; SACCHAROMYCES CEREVISIAE; RHIZOPUS STOLONIFER",
"StrengthNumber": ".0017; .0017; .0017; .0017; .0067; .0067; .0067; .0067; .0067; .0067; .0033; .0033; .0022; .0022; .0011; .0011; .0011; .0011; .0011; .0011; .0067; .0067; .0067; .0067; .0067; .0022",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Fungal Allergenic Extract [EPC],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0005-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0005-3)",
"NDC11Code": "49288-0005-03",
"ProductNDC": "49288-0005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "A Mold Mixture",
"NonProprietaryName": "A Mold Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "ASPERGILLUS FLAVUS; ASPERGILLUS FUMIGATUS; ASPERGILLUS NIGER VAR. NIGER; ASPERGILLUS REPENS; BOTRYTIS CINEREA; CHAETOMIUM GLOBOSUM; EPICOCCUM NIGRUM; FUSARIUM OXYSPORUM; GEOTRICHUM CANDIDUM; COCHLIOBOLUS SATIVUS; CANDIDA TROPICALIS; NEUROSPORA INTERMEDIA; MUCOR PLUMBEUS; MUCOR RACEMOSUS; PENICILLIUM CAMEMBERTI; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM EXPANSUM; PENICILLIUM ITALICUM; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM ROQUEFORTI; PHOMA DESTRUCTIVA; AUREOBASIDIUM PULLULANS VAR. PULLUTANS; RHIZOPUS STOLONIFER; RHODOTORULA RUBRA; SACCHAROMYCES CEREVISIAE; RHIZOPUS STOLONIFER",
"StrengthNumber": ".0008; .0008; .0008; .0008; .0033; .0033; .0033; .0033; .0033; .0033; .0017; .0017; .0011; .0011; .0006; .0006; .0006; .0006; .0006; .0006; .0033; .0033; .0033; .0033; .0033; .0011",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Fungal Allergenic Extract [EPC],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0006-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0006-3)",
"NDC11Code": "49288-0006-03",
"ProductNDC": "49288-0006",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "A Mold Mixture",
"NonProprietaryName": "A Mold Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "ASPERGILLUS FLAVUS; ASPERGILLUS FUMIGATUS; ASPERGILLUS NIGER VAR. NIGER; ASPERGILLUS REPENS; BOTRYTIS CINEREA; CHAETOMIUM GLOBOSUM; EPICOCCUM NIGRUM; FUSARIUM OXYSPORUM; GEOTRICHUM CANDIDUM; COCHLIOBOLUS SATIVUS; CANDIDA TROPICALIS; NEUROSPORA INTERMEDIA; MUCOR PLUMBEUS; MUCOR RACEMOSUS; PENICILLIUM CAMEMBERTI; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM EXPANSUM; PENICILLIUM ITALICUM; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM ROQUEFORTI; PHOMA DESTRUCTIVA; AUREOBASIDIUM PULLULANS VAR. PULLUTANS; RHIZOPUS STOLONIFER; RHODOTORULA RUBRA; SACCHAROMYCES CEREVISIAE; RHIZOPUS STOLONIFER",
"StrengthNumber": ".0004; .0004; .0004; .0004; .0017; .0017; .0017; .0017; .0017; .0017; .0008; .0008; .0006; .0006; .0003; .0003; .0003; .0003; .0003; .0003; .0017; .0017; .0017; .0017; .0017; .0006",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Fungal Allergenic Extract [EPC],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0007-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0007-3)",
"NDC11Code": "49288-0007-03",
"ProductNDC": "49288-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aspergillus Mixture",
"NonProprietaryName": "Aspergillus Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "ASPERGILLUS FLAVUS; ASPERGILLUS FUMIGATUS; ASPERGILLUS NIGER VAR. NIGER; ASPERGILLUS REPENS",
"StrengthNumber": ".0025; .0025; .0025; .0025",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Fungal Allergenic Extract [EPC],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0404-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0404-3)</PackageDescription>
<NDC11Code>49288-0404-03</NDC11Code>
<ProductNDC>49288-0404</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pimento</ProprietaryName>
<NonProprietaryName>Pimento</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>RED BELL PEPPER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0404-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0404-1)</PackageDescription>
<NDC11Code>49288-0404-01</NDC11Code>
<ProductNDC>49288-0404</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pimento</ProprietaryName>
<NonProprietaryName>Pimento</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>RED BELL PEPPER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0404-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0404-2)</PackageDescription>
<NDC11Code>49288-0404-02</NDC11Code>
<ProductNDC>49288-0404</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pimento</ProprietaryName>
<NonProprietaryName>Pimento</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>RED BELL PEPPER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0404-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0404-4)</PackageDescription>
<NDC11Code>49288-0404-04</NDC11Code>
<ProductNDC>49288-0404</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pimento</ProprietaryName>
<NonProprietaryName>Pimento</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>RED BELL PEPPER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0404-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0404-5)</PackageDescription>
<NDC11Code>49288-0404-05</NDC11Code>
<ProductNDC>49288-0404</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pimento</ProprietaryName>
<NonProprietaryName>Pimento</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>RED BELL PEPPER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>0404-0119-01</NDCCode>
<PackageDescription>1000 POUCH in 1 CASE (0404-0119-01) / 1 APPLICATOR in 1 POUCH / 2.3 mL in 1 APPLICATOR</PackageDescription>
<NDC11Code>00404-0119-01</NDC11Code>
<ProductNDC>0404-0119</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Henry Schein Povidone-iodine Swabsticks</ProprietaryName>
<NonProprietaryName>Povidone-iodine</NonProprietaryName>
<DosageFormName>SWAB</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191022</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>POVIDONE-IODINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-10-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191022</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Patient preoperative skin preparation: Helps to reduce bacteria that potentially can cause skin infection.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0404-0120-03</NDCCode>
<PackageDescription>500 POUCH in 1 CASE (0404-0120-03) / 3 APPLICATOR in 1 POUCH / 1.8 mL in 1 APPLICATOR</PackageDescription>
<NDC11Code>00404-0120-03</NDC11Code>
<ProductNDC>0404-0120</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Henry Schein Povidone-iodine Swabsticks</ProprietaryName>
<NonProprietaryName>Povidone-iodine</NonProprietaryName>
<DosageFormName>SWAB</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191022</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>POVIDONE-IODINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-10-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191022</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Patient preoperative skin preparation: Helps to reduce bacteria that potentially can cause skin infection.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0404-4438-03</NDCCode>
<PackageDescription>3.785 L in 1 BOTTLE (0404-4438-03) </PackageDescription>
<NDC11Code>00404-4438-03</NDC11Code>
<ProductNDC>0404-4438</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Antibacterial Hand</ProprietaryName>
<NonProprietaryName>Chloroxylenol</NonProprietaryName>
<DosageFormName>SOAP</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130130</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>CHLOROXYLENOL</SubstanceName>
<StrengthNumber>6.1</StrengthNumber>
<StrengthUnit>g/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For handwashing to decrease bacteria on skin. Recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0404-5637-01</NDCCode>
<PackageDescription>10 BOX in 1 CASE (0404-5637-01) > 100 POUCH in 1 BOX > .3 mL in 1 POUCH</PackageDescription>
<NDC11Code>00404-5637-01</NDC11Code>
<ProductNDC>0404-5637</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Povidine Iodine</ProprietaryName>
<NonProprietaryName>Povidine Iodine</NonProprietaryName>
<DosageFormName>SWAB</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110317</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333C</ApplicationNumber>
<LabelerName>Henry Schein Inc</LabelerName>
<SubstanceName>POVIDONE-IODINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For use as an : 1 first aid antiseptic , 2 pre-operative skin preperation.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0404-5638-01</NDCCode>
<PackageDescription>10 BOX in 1 CASE (0404-5638-01) > 50 POUCH in 1 BOX > 1 POUCH in 1 POUCH > .3 mL in 1 POUCH</PackageDescription>
<NDC11Code>00404-5638-01</NDC11Code>
<ProductNDC>0404-5638</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Povidine Iodine</ProprietaryName>
<NonProprietaryName>Povidine Iodine</NonProprietaryName>
<DosageFormName>SWAB</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110317</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333C</ApplicationNumber>
<LabelerName>Henry Schein Inc</LabelerName>
<SubstanceName>POVIDONE-IODINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For use as an : 1 first aid antiseptic , 2 pre-operative skin preperation.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0404-5639-01</NDCCode>
<PackageDescription>10 BOX in 1 CASE (0404-5639-01) > 25 POUCH in 1 BOX > 3 POUCH in 1 POUCH > .9 mL in 1 POUCH</PackageDescription>
<NDC11Code>00404-5639-01</NDC11Code>
<ProductNDC>0404-5639</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Povidine Iodine</ProprietaryName>
<NonProprietaryName>Povidine Iodine</NonProprietaryName>
<DosageFormName>SWAB</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110317</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333C</ApplicationNumber>
<LabelerName>Henry Schein Inc</LabelerName>
<SubstanceName>POVIDONE-IODINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For use as an : 1 first aid antiseptic , 2 pre-operative skin preperation.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0404-7191-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0404-7191-01) > 3.5 g in 1 TUBE</PackageDescription>
<NDC11Code>00404-7191-01</NDC11Code>
<ProductNDC>0404-7191</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erythromycin</ProprietaryName>
<NonProprietaryName>Erythromycin</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20150513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064030</ApplicationNumber>
<LabelerName>Henry Schein Inc.</LabelerName>
<SubstanceName>ERYTHROMYCIN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0404-7194-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0404-7194-01) > 3.5 g in 1 TUBE</PackageDescription>
<NDC11Code>00404-7194-01</NDC11Code>
<ProductNDC>0404-7194</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neomycin And Polymyxin B Sulfates, And Bacitracin Zinc</ProprietaryName>
<NonProprietaryName>Neomycin Sulfate, Polymyxin B Sulfate And Bacitracin Zinc</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20150513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065088</ApplicationNumber>
<LabelerName>Henry Schein Inc.</LabelerName>
<SubstanceName>BACITRACIN ZINC; NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>400; 3.5; 10000</StrengthNumber>
<StrengthUnit>[USP'U]/g; mg/g; [USP'U]/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0404-7195-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0404-7195-01) > 3.5 g in 1 TUBE</PackageDescription>
<NDC11Code>00404-7195-01</NDC11Code>
<ProductNDC>0404-7195</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neomycin And Polymyxin B Sulfates, Bacitracin Zinc, And Hydrocortisone</ProprietaryName>
<NonProprietaryName>Neomycin Sulfate, Polymyxin B Sulfate, Bacitracin Zinc And Hydrocortisone</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20150513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065213</ApplicationNumber>
<LabelerName>Henry Schein Inc.</LabelerName>
<SubstanceName>BACITRACIN ZINC; HYDROCORTISONE; NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>400; 10; 3.5; 10000</StrengthNumber>
<StrengthUnit>[USP'U]/g; mg/g; mg/g; [USP'U]/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Decreased Cell Wall Synthesis & Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0404-9034-03</NDCCode>
<PackageDescription>3 BOTTLE, PUMP in 1 CASE (0404-9034-03) > 1890 mL in 1 BOTTLE, PUMP (0404-9034-01) </PackageDescription>
<NDC11Code>00404-9034-03</NDC11Code>
<ProductNDC>0404-9034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acclean</ProprietaryName>
<ProprietaryNameSuffix>Dual Fluoride Rinse Part B 1.24% Mint</ProprietaryNameSuffix>
<NonProprietaryName>Fluoride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20170303</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Henry Schein</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>.02522</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0404-9035-03</NDCCode>
<PackageDescription>3 BOTTLE, PUMP in 1 CASE (0404-9035-03) > 1890 mL in 1 BOTTLE, PUMP (0404-9035-01) </PackageDescription>
<NDC11Code>00404-9035-03</NDC11Code>
<ProductNDC>0404-9035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acclean</ProprietaryName>
<ProprietaryNameSuffix>Dual Fluoride Rinse 1.24% Apf Bubblegum</ProprietaryNameSuffix>
<NonProprietaryName>Fluoride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>DENTAL</RouteName>
<StartMarketingDate>20170303</StartMarketingDate>
<EndMarketingDate>20201231</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Henry Schein</LabelerName>
<SubstanceName>SODIUM FLUORIDE</SubstanceName>
<StrengthNumber>.02522</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170303</StartMarketingDatePackage>
<EndMarketingDatePackage>20201231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0404-9772-03</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (0404-9772-03) / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>00404-9772-03</NDC11Code>
<ProductNDC>0404-9772</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251029</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077234</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251029</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone Hydrochloride Injection, USP is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone Hydrochloride Injection, USP also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with Amiodarone Hydrochloride Injection, USP patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use Amiodarone Hydrochloride Injection, USP for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but Amiodarone Hydrochloride Injection may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone Hydrochloride Injection contains Amiodarone Hydrochloride (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone Hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone Hydrochloride has the following structural formula. Amiodarone Hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>0404-9815-03</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 BAG (0404-9815-03) / 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00404-9815-03</NDC11Code>
<ProductNDC>0404-9815</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220108</StartMarketingDate>
<EndMarketingDate>20260331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076217</ApplicationNumber>
<LabelerName>Henry Schein, Inc</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220108</StartMarketingDatePackage>
<EndMarketingDatePackage>20260331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride, USP (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see DOSAGE AND ADMINISTRATION (2)].</Description>
</NDC>
<NDC>
<NDCCode>0404-9834-99</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (0404-9834-99) / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>00404-9834-99</NDC11Code>
<ProductNDC>0404-9834</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefazolin</ProprietaryName>
<NonProprietaryName>Cefazolin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065047</ApplicationNumber>
<LabelerName>Henry Schein, Inc.</LabelerName>
<SubstanceName>CEFAZOLIN SODIUM</SubstanceName>
<StrengthNumber>330</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefazolin for Injection, USP is indicated in the treatment of the following serious infections due to susceptible organisms. Respiratory Tract Infections: Due to S. pneumoniae, Klebsiella species, H. influenzae, S. aureus (penicillin-sensitive and penicillin-resistant), and group A beta-hemolytic streptococci. Injectable benzathine penicillin is considered to be the drug of choice in treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cefazolin for Injection is effective in the eradication of streptococci from the nasopharynx; however, data establishing the efficacy of Cefazolin for Injection in the subsequent prevention of rheumatic fever are not available at present. Urinary Tract Infections: Due to E. coli, P. mirabilis, Klebsiella species, and some strains of enterobacter and enterococci. Skin and Skin Structure Infections: Due to S. aureus (penicillin-sensitive and penicillin-resistant), group A beta-hemolytic streptococci, and other strains of streptococci. Biliary Tract Infections: Due to E. coli, various strains of streptococci, P. mirabilis, Klebsiella species, and S. aureus. Bone and Joint Infections: Due to S. aureus. Genital Infections: (i.e., prostatitis, epididymitis) due to E. coli, P. mirabilis, Klebsiella species, and some strains of enterococci. Septicemia: Due to S. pneumoniae, S. aureus (penicillin-sensitive and penicillin-resistant), P. mirabilis, E. coli and Klebsiella species. Endocarditis: Due to S. aureus (penicillin-sensitive and penicillin-resistant) and group A beta-hemolytic streptococci. Perioperative Prophylaxis: The prophylactic administration of Cefazolin for Injection preoperatively, intraoperatively and postoperatively may reduce the incidence of certain postoperative infections in patients undergoing surgical procedures which are classified as contaminated or potentially contaminated (e.g., vaginal hysterectomy, and cholecystectomy in high-risk patients such as those older than 70 years, with acute cholecystitis, obstructive jaundice, or common duct bile stones). The perioperative use of Cefazolin for Injection may also be effective in surgical patients in whom infection at the operative site would present a serious risk (e.g., during open-heart surgery and prosthetic arthroplasty). The prophylactic administration of Cefazolin for Injection should usually be discontinued within a 24 hour period after the surgical procedure. In surgery where the occurrence of infection may be particularly devastating (e.g., open-heart surgery and prosthetic arthroplasty), the prophylactic administration of Cefazolin for Injection may be continued for 3 to 5 days following the completion of surgery. If there are signs of infection, specimens for cultures should be obtained for the identification of the causative organism so that appropriate therapy may be instituted (see DOSAGE AND ADMINISTRATION). To reduce the development of drug-resistant bacteria and maintain the effectiveness of Cefazolin for Injection, USP and other antibacterial drugs, Cefazolin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cefazolin for Injection, USP is a semi-synthetic cephalosporin for parenteral administration. It is the sodium salt of 3-{[(5-methyl-1,3,4-thiadiazol-2-yl)thio]-methyl}-8-oxo-7-[2-(1H-tetrazol-1-yl) acetamido]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid. The molecular formula is C14H13N8NaO4S3 and molecular weight is 476.49. Structural Formula. Each vial contains 48 mg of sodium/1 gram of cefazolin sodium. Cefazolin for Injection, USP is white to off-white crystalline powder, supplied in vials equivalent to 500 mg or 1 gram of cefazolin.</Description>
</NDC>
<NDC>
<NDCCode>15631-0404-3</NDCCode>
<PackageDescription>750 PELLET in 1 PACKAGE (15631-0404-3) </PackageDescription>
<NDC11Code>15631-0404-03</NDC11Code>
<ProductNDC>15631-0404</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Silicea</ProprietaryName>
<NonProprietaryName>Silicea</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151002</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>SILICON DIOXIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2021-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37662-0404-3</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (37662-0404-3) </PackageDescription>
<NDC11Code>37662-0404-03</NDC11Code>
<ProductNDC>37662-0404</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Chromium Metallicum</ProprietaryName>
<NonProprietaryName>Chromium Metallicum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220608</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>CHROMIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58443-0404-3</NDCCode>
<PackageDescription>59 mL in 1 TUBE (58443-0404-3) </PackageDescription>
<NDC11Code>58443-0404-03</NDC11Code>
<ProductNDC>58443-0404</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ulta</ProprietaryName>
<ProprietaryNameSuffix>Broad Spectrum Spf 30</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180316</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Prime Enterprises, Inc.</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>31.5; 31.5</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. If used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-0404-3</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (71335-0404-3) </PackageDescription>
<NDC11Code>71335-0404-03</NDC11Code>
<ProductNDC>71335-0404</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline</ProprietaryName>
<NonProprietaryName>Sertraline</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077670</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220502</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49288-0001-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0001-3)</PackageDescription>
<NDC11Code>49288-0001-03</NDC11Code>
<ProductNDC>49288-0001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alternaria Alternata</ProprietaryName>
<NonProprietaryName>Alternaria Alternata</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>ALTERNARIA ALTERNATA</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0002-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0002-3)</PackageDescription>
<NDC11Code>49288-0002-03</NDC11Code>
<ProductNDC>49288-0002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alternaria Alternata</ProprietaryName>
<NonProprietaryName>Alternaria Alternata</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>ALTERNARIA ALTERNATA</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0003-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0003-3)</PackageDescription>
<NDC11Code>49288-0003-03</NDC11Code>
<ProductNDC>49288-0003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alternaria Alternata</ProprietaryName>
<NonProprietaryName>Alternaria Alternata</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>ALTERNARIA ALTERNATA</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0004-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0004-3)</PackageDescription>
<NDC11Code>49288-0004-03</NDC11Code>
<ProductNDC>49288-0004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>A Mold Mixture</ProprietaryName>
<NonProprietaryName>A Mold Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920413</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>ASPERGILLUS FLAVUS; ASPERGILLUS FUMIGATUS; ASPERGILLUS NIGER VAR. NIGER; ASPERGILLUS REPENS; BOTRYTIS CINEREA; CHAETOMIUM GLOBOSUM; EPICOCCUM NIGRUM; FUSARIUM OXYSPORUM; GEOTRICHUM CANDIDUM; COCHLIOBOLUS SATIVUS; CANDIDA TROPICALIS; NEUROSPORA INTERMEDIA; MUCOR PLUMBEUS; MUCOR RACEMOSUS; PENICILLIUM CAMEMBERTI; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM EXPANSUM; PENICILLIUM ITALICUM; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM ROQUEFORTI; PHOMA DESTRUCTIVA; AUREOBASIDIUM PULLULANS VAR. PULLUTANS; RHIZOPUS STOLONIFER; RHODOTORULA RUBRA; SACCHAROMYCES CEREVISIAE; RHIZOPUS STOLONIFER</SubstanceName>
<StrengthNumber>.0017; .0017; .0017; .0017; .0067; .0067; .0067; .0067; .0067; .0067; .0033; .0033; .0022; .0022; .0011; .0011; .0011; .0011; .0011; .0011; .0067; .0067; .0067; .0067; .0067; .0022</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Fungal Allergenic Extract [EPC],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0005-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0005-3)</PackageDescription>
<NDC11Code>49288-0005-03</NDC11Code>
<ProductNDC>49288-0005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>A Mold Mixture</ProprietaryName>
<NonProprietaryName>A Mold Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>ASPERGILLUS FLAVUS; ASPERGILLUS FUMIGATUS; ASPERGILLUS NIGER VAR. NIGER; ASPERGILLUS REPENS; BOTRYTIS CINEREA; CHAETOMIUM GLOBOSUM; EPICOCCUM NIGRUM; FUSARIUM OXYSPORUM; GEOTRICHUM CANDIDUM; COCHLIOBOLUS SATIVUS; CANDIDA TROPICALIS; NEUROSPORA INTERMEDIA; MUCOR PLUMBEUS; MUCOR RACEMOSUS; PENICILLIUM CAMEMBERTI; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM EXPANSUM; PENICILLIUM ITALICUM; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM ROQUEFORTI; PHOMA DESTRUCTIVA; AUREOBASIDIUM PULLULANS VAR. PULLUTANS; RHIZOPUS STOLONIFER; RHODOTORULA RUBRA; SACCHAROMYCES CEREVISIAE; RHIZOPUS STOLONIFER</SubstanceName>
<StrengthNumber>.0008; .0008; .0008; .0008; .0033; .0033; .0033; .0033; .0033; .0033; .0017; .0017; .0011; .0011; .0006; .0006; .0006; .0006; .0006; .0006; .0033; .0033; .0033; .0033; .0033; .0011</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Fungal Allergenic Extract [EPC],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0006-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0006-3)</PackageDescription>
<NDC11Code>49288-0006-03</NDC11Code>
<ProductNDC>49288-0006</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>A Mold Mixture</ProprietaryName>
<NonProprietaryName>A Mold Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>ASPERGILLUS FLAVUS; ASPERGILLUS FUMIGATUS; ASPERGILLUS NIGER VAR. NIGER; ASPERGILLUS REPENS; BOTRYTIS CINEREA; CHAETOMIUM GLOBOSUM; EPICOCCUM NIGRUM; FUSARIUM OXYSPORUM; GEOTRICHUM CANDIDUM; COCHLIOBOLUS SATIVUS; CANDIDA TROPICALIS; NEUROSPORA INTERMEDIA; MUCOR PLUMBEUS; MUCOR RACEMOSUS; PENICILLIUM CAMEMBERTI; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM EXPANSUM; PENICILLIUM ITALICUM; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; PENICILLIUM ROQUEFORTI; PHOMA DESTRUCTIVA; AUREOBASIDIUM PULLULANS VAR. PULLUTANS; RHIZOPUS STOLONIFER; RHODOTORULA RUBRA; SACCHAROMYCES CEREVISIAE; RHIZOPUS STOLONIFER</SubstanceName>
<StrengthNumber>.0004; .0004; .0004; .0004; .0017; .0017; .0017; .0017; .0017; .0017; .0008; .0008; .0006; .0006; .0003; .0003; .0003; .0003; .0003; .0003; .0017; .0017; .0017; .0017; .0017; .0006</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Fungal Allergenic Extract [EPC],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0007-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0007-3)</PackageDescription>
<NDC11Code>49288-0007-03</NDC11Code>
<ProductNDC>49288-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aspergillus Mixture</ProprietaryName>
<NonProprietaryName>Aspergillus Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>ASPERGILLUS FLAVUS; ASPERGILLUS FUMIGATUS; ASPERGILLUS NIGER VAR. NIGER; ASPERGILLUS REPENS</SubstanceName>
<StrengthNumber>.0025; .0025; .0025; .0025</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Fungal Proteins [CS],Allergens [CS],Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Fungal Allergenic Extract [EPC],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
</NDCList>