{
"NDC": [
{
"NDCCode": "49288-0492-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0492-2)",
"NDC11Code": "49288-0492-02",
"ProductNDC": "49288-0492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Sweet Vernal Grass Pollen",
"NonProprietaryName": "Standardized Sweet Vernal Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19970613",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103624",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "ANTHOXANTHUM ODORATUM POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.",
"Description": "DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection."
},
{
"NDCCode": "49288-0492-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0492-3)",
"NDC11Code": "49288-0492-03",
"ProductNDC": "49288-0492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Sweet Vernal Grass Pollen",
"NonProprietaryName": "Standardized Sweet Vernal Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19970613",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103624",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "ANTHOXANTHUM ODORATUM POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.",
"Description": "DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection."
},
{
"NDCCode": "49288-0492-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0492-4)",
"NDC11Code": "49288-0492-04",
"ProductNDC": "49288-0492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Sweet Vernal Grass Pollen",
"NonProprietaryName": "Standardized Sweet Vernal Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19970613",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103624",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "ANTHOXANTHUM ODORATUM POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.",
"Description": "DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection."
},
{
"NDCCode": "49288-0492-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0492-5)",
"NDC11Code": "49288-0492-05",
"ProductNDC": "49288-0492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Sweet Vernal Grass Pollen",
"NonProprietaryName": "Standardized Sweet Vernal Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19970613",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103624",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "ANTHOXANTHUM ODORATUM POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.",
"Description": "DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection."
},
{
"NDCCode": "37662-0492-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-0492-2) ",
"NDC11Code": "37662-0492-02",
"ProductNDC": "37662-0492",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Coccus Cacti",
"NonProprietaryName": "Coccus Cacti",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220610",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "PROTORTONIA CACTI",
"StrengthNumber": "100",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-06-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220610",
"SamplePackage": "N"
},
{
"NDCCode": "67296-0492-2",
"PackageDescription": "15 TABLET in 1 BOTTLE (67296-0492-2)",
"NDC11Code": "67296-0492-02",
"ProductNDC": "67296-0492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen Tablets",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040748",
"LabelerName": "RedPharm Drug Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; ACETAMINOPHEN",
"StrengthNumber": "7.5; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2019-01-01",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "69968-0492-1",
"PackageDescription": "1 KIT in 1 CONTAINER (69968-0492-1) * 300 mL in 1 BOTTLE, PUMP * 300 mL in 1 BOTTLE * 200 mL in 1 BOTTLE * 57 g in 1 TUBE (69968-0219-2) ",
"NDC11Code": "69968-0492-01",
"ProductNDC": "69968-0492",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Johnsons First Touch Baby Gift Set",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "KIT",
"StartMarketingDate": "20180601",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "Johnson & Johnson Consumer Inc.",
"Status": "Deprecated",
"LastUpdate": "2020-08-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20180601",
"SamplePackage": "N"
},
{
"NDCCode": "71335-0492-2",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (71335-0492-2) ",
"NDC11Code": "71335-0492-02",
"ProductNDC": "71335-0492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091672",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20141031",
"SamplePackage": "N"
},
{
"NDCCode": "80425-0492-2",
"PackageDescription": "30 TABLET in 1 BOTTLE (80425-0492-2) ",
"NDC11Code": "80425-0492-02",
"ProductNDC": "80425-0492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ciprofloxacin",
"NonProprietaryName": "Ciprofolxacin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208921",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "CIPROFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250202",
"SamplePackage": "N",
"IndicationAndUsage": "Click here to enter Indications.",
"Description": "Ciprofloxacin Tablets, USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl- 6-fluoro- 1,4-dihydro- 4-oxo- 7-(1-piperazinyl)- 3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its empirical formula is C 17H 18FN 3O 3HClH 2O and its chemical structure is as follows:. Ciprofloxacin is 1-cyclopropyl- 6-fluoro- 1,4-dihydro- 4-oxo- 7-(1-piperazinyl)- 3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows. Ciprofloxacin film-coated tablets are available in 250 mg and 500 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin Tablets, USP are white. The inactive ingredients are colloidal silicon dioxide, corn starch, partially pregelatinized maize starch, magnesium stearate, microcrystalline cellulose, sodium starch glycolate (starch from non-GMO potatoes), hypromellose, titanium dioxide and PEG."
},
{
"NDCCode": "10135-492-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (10135-492-01) ",
"NDC11Code": "10135-0492-01",
"ProductNDC": "10135-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Salsalate",
"NonProprietaryName": "Salsalate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070401",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "SALSALATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20070401",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Salsalate tablets, USP and other treatment options before deciding to use Salsalate tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Salsalate is indicated for relief of the signs and symptoms of rheumatoid arthritis, osteoarthritis and related rheumatic disorder.",
"Description": "Salsalate, is a nonsteroidal anti-inflammatory agent for oral administration. Chemically, salsalate (salicylsalicylic acid or 2-hydroxy-benzoic acid, 2- carboxyphenyl ester) is a dimer of salicylic acid; its structural formula is shown below. Chemical Structure. Tablets. Inactive Ingredients: Carnauba wax, Colloidal Silicon Dioxide, Croscarmellose Sodium, D&C Yellow # 10, Hypromellose, Microcrystalline Cellulose, Polyethylene Glycol, Stearic Acid, and Titanium Dioxide."
},
{
"NDCCode": "10135-492-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (10135-492-05) ",
"NDC11Code": "10135-0492-05",
"ProductNDC": "10135-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Salsalate",
"NonProprietaryName": "Salsalate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070401",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "SALSALATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20070401",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Salsalate tablets, USP and other treatment options before deciding to use Salsalate tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Salsalate is indicated for relief of the signs and symptoms of rheumatoid arthritis, osteoarthritis and related rheumatic disorder.",
"Description": "Salsalate, is a nonsteroidal anti-inflammatory agent for oral administration. Chemically, salsalate (salicylsalicylic acid or 2-hydroxy-benzoic acid, 2- carboxyphenyl ester) is a dimer of salicylic acid; its structural formula is shown below. Chemical Structure. Tablets. Inactive Ingredients: Carnauba wax, Colloidal Silicon Dioxide, Croscarmellose Sodium, D&C Yellow # 10, Hypromellose, Microcrystalline Cellulose, Polyethylene Glycol, Stearic Acid, and Titanium Dioxide."
},
{
"NDCCode": "10135-492-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (10135-492-10) ",
"NDC11Code": "10135-0492-10",
"ProductNDC": "10135-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Salsalate",
"NonProprietaryName": "Salsalate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070401",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "SALSALATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20070401",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Salsalate tablets, USP and other treatment options before deciding to use Salsalate tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Salsalate is indicated for relief of the signs and symptoms of rheumatoid arthritis, osteoarthritis and related rheumatic disorder.",
"Description": "Salsalate, is a nonsteroidal anti-inflammatory agent for oral administration. Chemically, salsalate (salicylsalicylic acid or 2-hydroxy-benzoic acid, 2- carboxyphenyl ester) is a dimer of salicylic acid; its structural formula is shown below. Chemical Structure. Tablets. Inactive Ingredients: Carnauba wax, Colloidal Silicon Dioxide, Croscarmellose Sodium, D&C Yellow # 10, Hypromellose, Microcrystalline Cellulose, Polyethylene Glycol, Stearic Acid, and Titanium Dioxide."
},
{
"NDCCode": "16729-492-12",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (16729-492-12) ",
"NDC11Code": "16729-0492-12",
"ProductNDC": "16729-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dofetilide",
"NonProprietaryName": "Dofetilide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200820",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213338",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "DOFETILIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiarrhythmic [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200820",
"SamplePackage": "N",
"IndicationAndUsage": "Dofetilide capsules are indicated for the maintenance of normal sinus rhythm (delay in time to recurrence of atrial fibrillation/atrial flutter [AF/AFl]) in patients with atrial fibrillation/atrial flutter of greater than one week duration who have been converted to normal sinus rhythm. Because dofetilide can cause life threatening ventricular arrhythmias, it should be reserved for patients in whom atrial fibrillation/atrial flutter is highly symptomatic. In general, antiarrhythmic therapy for atrial fibrillation/atrial flutter aims to prolong the time in normal sinus rhythm. Recurrence is expected in some patients (see CLINICAL STUDIES).",
"Description": "Dofetilide is an antiarrhythmic drug with Class III (cardiac action potential duration prolonging) properties. Its empirical formula is C 19H 27N 3O 5S 2and it has a molecular weight of 441.6. The structural formula is. The chemical name for dofetilide is: N-[4-[2-[methyl[2-[4-[(methylsulfonyl)amino]phenoxy]ethyl]amino]ethyl]phenyl]-methanesulfonamide. Dofetilide is a white to off-white powder. It is very slightly soluble in water and propan-2-ol and is soluble in 0.1M aqueous sodium hydroxide, acetone, and aqueous 0.1M hydrochloric acid. Dofetilide capsules contain the following inactive ingredients: Capsule fill:colloidal anhydrous silica, magnesium stearate, maize starch, microcrystalline cellulose Capsule shell:gelatin, titanium dioxide, and FD&C Yellow 6 Imprinting ink:iron oxide black, shellac, potassium hydroxide Dofetilide capsules are supplied for oral administration in three dosage strengths: 125 mcg (0.125 mg) light orange and white capsules, 250 mcg (0.25 mg) peach capsules, and 500 mcg (0.5 mg) peach and white capsules."
},
{
"NDCCode": "24090-492-94",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (24090-492-94) > 7 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "24090-0492-94",
"ProductNDC": "24090-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tirosint",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021924",
"LabelerName": "Akrimax Pharmaceuticals, LLC",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "50",
"StrengthUnit": "ug/1",
"Pharm_Classes": "l-Thyroxine [EPC],Thyroxine [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20100401",
"SamplePackage": "N"
},
{
"NDCCode": "31722-492-31",
"PackageDescription": "5 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (31722-492-31) / 10 mL in 1 VIAL, PHARMACY BULK PACKAGE (31722-492-10) ",
"NDC11Code": "31722-0492-31",
"ProductNDC": "31722-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Selenious Acid",
"NonProprietaryName": "Selenious Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219633",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "SELENIUM",
"StrengthNumber": "60",
"StrengthUnit": "ug/mL",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250611",
"SamplePackage": "N",
"IndicationAndUsage": "Selenious acid injection is indicated in adult and pediatric patients as a source of selenium for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "Selenious acid injection, USP is a sterile, non-pyrogenic, clear, colorless solution intended for use as a trace element and additive to intravenous solutions for parenteral nutrition. Each 600 mcg/10 mL Pharmacy Bulk Package vial contains 10 mL of selenious acid solution. Each 6 mcg/mL single-dose vial contains 2 mL of selenious acid solution. None of the presentations contain preservatives. Each mL of the 60 mcg/mL strength contains 60 mcg of selenium present as 98 mcg of selenious acid, nitric acid for pH adjustment (1.8 to 2.4), and water for injection q.s. Each mL of the 6 mcg/mL strength contains 6 mcg of selenium present as 9.8 mcg of selenious acid, nitric acid for pH adjustment (1.8 to 2.4), and water for injection q.s. Selenious acid injection 60 mcg/mL contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 16 mOsmol/L. Selenious acid injection 6 mcg/mL contains no more than 900 mcg/L of aluminum and has a calculated osmolarity of 13 mOsmol/L. Selenious acid has a molecular weight of 128.97 g/mol and a formula of H 2SeO 3. The structural formula is:."
},
{
"NDCCode": "33342-492-11",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (33342-492-11) ",
"NDC11Code": "33342-0492-11",
"ProductNDC": "33342-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carbidopa, Levodopa And Entacapone",
"NonProprietaryName": "Carbidopa, Levodopa And Entacapone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214495",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "CARBIDOPA; LEVODOPA; ENTACAPONE",
"StrengthNumber": "18.75; 75; 200",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC], Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250415",
"SamplePackage": "N",
"IndicationAndUsage": "Carbidopa, levodopa and entacapone tablets, is indicated for the treatment of Parkinson’s disease. Carbidopa, levodopa and entacapone tablets can be used: : 1 To substitute (with equivalent strengths of each of the three components) carbidopa/levodopa and entacapone previously administered as individual products., 2 To replace carbidopa/levodopa therapy (without entacapone) when patients experience the signs and symptoms of end-of-dose “wearing-off” and when they have been taking a total daily dose of levodopa of 600 mg or less and have not been experiencing dyskinesias. .",
"Description": "Carbidopa, levodopa and entacapone tablets is a combination of carbidopa, levodopa, and entacapone for the treatment of Parkinson’s disease. Carbidopa, an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.3. It is designated chemically as (-)-L-(α-hydrazino-(α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its empirical formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa, which has a molecular weight of 226.3. Levodopa, an aromatic amino acid, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 197.2. It is designated chemically as (-)-L-α-amino-β-(3,4-dihydroxybenzene) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Entacapone, a COMT inhibitor, is a nitro-catechol-structured compound with a molecular weight of 305.3. The chemical name of entacapone is (E)-2-cyano-3-(3,4-dihydroxy-5-nitrophenyl)-N,N-diethyl-2-propenamide. Its empirical formula is C14H15N3O5 and its structural formula is. Carbidopa, levodopa and entacapone film coated tablets is supplied as tablets in 6 strengths: 12.5 mg of carbidopa, USP; 50 mg of levodopa, USP and 200 mg of entacapone USP 18.75 mg of carbidopa, USP; 75 mg of levodopa, USP and 200 mg of entacapone USP 25 mg of carbidopa, USP; 100 mg of levodopa, USP and 200 mg of entacapone USP 31.25 mg of carbidopa, USP; 125 mg of levodopa, USP and 200 mg of entacapone USP 37.5 mg of carbidopa, USP; 150 mg of levodopa, USP and 200 mg of entacapone USP 50 mg of carbidopa, USP; 200 mg of levodopa, USP and 200 mg of entacapone USP. Inactive Ingredients: Colloidal silicon dioxide, Croscarmellose sodium, Crospovidone, Magnesium stearate, Maltodextrin, Microcrystalline cellulose, Povidone. The coating material Instacoat Brown HIS consists of Hypromellose, Polysorbate 80, Red Iron Oxide, Titanium Dioxide, Yellow Iron Oxide."
},
{
"NDCCode": "33342-492-12",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (33342-492-12) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "33342-0492-12",
"ProductNDC": "33342-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carbidopa, Levodopa And Entacapone",
"NonProprietaryName": "Carbidopa, Levodopa And Entacapone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214495",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "CARBIDOPA; LEVODOPA; ENTACAPONE",
"StrengthNumber": "18.75; 75; 200",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC], Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250415",
"SamplePackage": "N",
"IndicationAndUsage": "Carbidopa, levodopa and entacapone tablets, is indicated for the treatment of Parkinson’s disease. Carbidopa, levodopa and entacapone tablets can be used: : 1 To substitute (with equivalent strengths of each of the three components) carbidopa/levodopa and entacapone previously administered as individual products., 2 To replace carbidopa/levodopa therapy (without entacapone) when patients experience the signs and symptoms of end-of-dose “wearing-off” and when they have been taking a total daily dose of levodopa of 600 mg or less and have not been experiencing dyskinesias. .",
"Description": "Carbidopa, levodopa and entacapone tablets is a combination of carbidopa, levodopa, and entacapone for the treatment of Parkinson’s disease. Carbidopa, an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.3. It is designated chemically as (-)-L-(α-hydrazino-(α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its empirical formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa, which has a molecular weight of 226.3. Levodopa, an aromatic amino acid, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 197.2. It is designated chemically as (-)-L-α-amino-β-(3,4-dihydroxybenzene) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Entacapone, a COMT inhibitor, is a nitro-catechol-structured compound with a molecular weight of 305.3. The chemical name of entacapone is (E)-2-cyano-3-(3,4-dihydroxy-5-nitrophenyl)-N,N-diethyl-2-propenamide. Its empirical formula is C14H15N3O5 and its structural formula is. Carbidopa, levodopa and entacapone film coated tablets is supplied as tablets in 6 strengths: 12.5 mg of carbidopa, USP; 50 mg of levodopa, USP and 200 mg of entacapone USP 18.75 mg of carbidopa, USP; 75 mg of levodopa, USP and 200 mg of entacapone USP 25 mg of carbidopa, USP; 100 mg of levodopa, USP and 200 mg of entacapone USP 31.25 mg of carbidopa, USP; 125 mg of levodopa, USP and 200 mg of entacapone USP 37.5 mg of carbidopa, USP; 150 mg of levodopa, USP and 200 mg of entacapone USP 50 mg of carbidopa, USP; 200 mg of levodopa, USP and 200 mg of entacapone USP. Inactive Ingredients: Colloidal silicon dioxide, Croscarmellose sodium, Crospovidone, Magnesium stearate, Maltodextrin, Microcrystalline cellulose, Povidone. The coating material Instacoat Brown HIS consists of Hypromellose, Polysorbate 80, Red Iron Oxide, Titanium Dioxide, Yellow Iron Oxide."
},
{
"NDCCode": "41250-492-24",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (41250-492-24) / 12 TABLET in 1 BLISTER PACK",
"NDC11Code": "41250-0492-24",
"ProductNDC": "41250-492",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Laxative Pills",
"ProprietaryNameSuffix": "Maximum Strength",
"NonProprietaryName": "Sennosides",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160331",
"EndMarketingDate": "20250331",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "MEIJER, INC.",
"SubstanceName": "SENNOSIDES",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160331",
"EndMarketingDatePackage": "20250331",
"SamplePackage": "N",
"IndicationAndUsage": "relieves occasional constipation (irregularity) . generally produces bowel movement in 6 to 12 hours."
},
{
"NDCCode": "41520-492-24",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (41520-492-24) > 12 TABLET in 1 BLISTER PACK",
"NDC11Code": "41520-0492-24",
"ProductNDC": "41520-492",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Laxative Pills",
"ProprietaryNameSuffix": "Maximum Strength",
"NonProprietaryName": "Sennosides",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160531",
"EndMarketingDate": "20250530",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "Care One (American Sales Company)",
"SubstanceName": "SENNOSIDES",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160531",
"EndMarketingDatePackage": "20250530",
"SamplePackage": "N",
"IndicationAndUsage": "relieves occasional constipation (irregularity) . generally produces bowel movement in 6 to 12 hours."
},
{
"NDCCode": "42291-492-09",
"PackageDescription": "1 BOTTLE in 1 CARTON (42291-492-09) / 90 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "42291-0492-09",
"ProductNDC": "42291-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pirfenidone",
"NonProprietaryName": "Pirfenidone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20231018",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212570",
"LabelerName": "AvKARE",
"SubstanceName": "PIRFENIDONE",
"StrengthNumber": "801",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Pyridone [EPC], Pyridones [CS]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231018",
"SamplePackage": "N",
"IndicationAndUsage": "Pirfenidone tablets are indicated for the treatment of idiopathic pulmonary fibrosis (IPF).",
"Description": "Pirfenidone belongs to the chemical class of pyridone. Pirfenidone tablets are available as film-coated tablets containing 267 mg (yellow) and 801 mg (brown) pirfenidone. Pirfenidone has a molecular formula of C 12H 11NO and a molecular weight of 185.22 g/mol. Pirfenidone has the following structural formula, which has been referred to as 5-methyl-1-phenylpyridin-2-one. Pirfenidone is a white to pale yellow, non-hygroscopic, crystalline powder. It is sparingly soluble in water, freely soluble in ethanol (96%), and slightly soluble in heptane. The melting point range is 107°C to 111°C. Pirfenidone Tablets are available for oral administration, each pirfenidone tablet contains pirfenidone, 267 mg or 801 mg, as active ingredient and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, ferrosoferric oxide (801 mg), hypromellose, iron oxide red (801 mg), iron oxide yellow (267 mg), lactose monohydrate, magnesium stearate, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide."
},
{
"NDCCode": "42549-492-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (42549-492-30)",
"NDC11Code": "42549-0492-30",
"ProductNDC": "42549-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxepin Hydrochloride",
"NonProprietaryName": "Doxepin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19871109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071669",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "DOXEPIN HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Doxepin HCl is recommended for the treatment of: 1 Psychoneurotic patients with depression and/or anxiety., 2 Depression and/or anxiety associated with alcoholism (not to be taken concomitantly with alcohol)., 3 Depression and/or anxiety associated with organic disease (the possibility of drug interaction should be considered if the patient is receiving other drugs concomitantly)., 4 Psychotic depressive disorders with associated anxiety including involutional depression and manic-depressive disorders.",
"Description": "Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19H21NOHCl having a molecular weight of 315.84. It is a white crystalline solid readily soluble in water, lower alcohols and chloroform. Its structural formula is. Chemistry:Doxepin HCl is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of: 1-Propanamine, 3-dibenz[b,e]oxepin-11(6 H)ylidene-N,N-dimethyl-hydrochloride. Each doxepin hydrochloride capsule is equivalent to 10 mg, 25 mg, 50 mg, 75 mg, 100 mg and 150mg of doxepin for oral administration. Each capsule contains the following inactive ingredients: corn starch, D&C Yellow #10, FD&C Blue #1, FD&C Blue #2, FD&C Red #40, gelatin, magnesium stearate, pharmaceutical glaze, sodium laurel sulfate, synthetic black iron oxide, titanium dioxide and other ingredients. In addition, the 10 mg capsule contains FD&C Yellow #6; the 25 mg and 50 mg capsules contain FD&C Yellow #6 and propylene glycol; the 75 mg capsule contains FD&C Green #3 and propylene glycol; and the 100 mg capsule contains FD&C Green #3."
},
{
"NDCCode": "43353-492-30",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (43353-492-30)",
"NDC11Code": "43353-0492-30",
"ProductNDC": "43353-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Coumadin",
"NonProprietaryName": "Warfarin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA009218",
"LabelerName": "Aphena Pharma Solutions - Tennessee, Inc.",
"SubstanceName": "WARFARIN SODIUM",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vitamin K Antagonist [EPC],Vitamin K Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "COUMADIN® is indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.",
"Description": "COUMADIN (warfarin sodium) is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its empirical formula is C19H15NaO4, and its structural formula is represented by the following. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. COUMADIN tablets for oral use also contain. COUMADIN for injection for intravenous use is supplied as a sterile, lyophilized powder, which, after reconstitution with 2.7 mL Sterile Water for Injection, contains."
},
{
"NDCCode": "43353-492-60",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (43353-492-60)",
"NDC11Code": "43353-0492-60",
"ProductNDC": "43353-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Coumadin",
"NonProprietaryName": "Warfarin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA009218",
"LabelerName": "Aphena Pharma Solutions - Tennessee, Inc.",
"SubstanceName": "WARFARIN SODIUM",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Vitamin K Antagonist [EPC],Vitamin K Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "COUMADIN® is indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.",
"Description": "COUMADIN (warfarin sodium) is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its empirical formula is C19H15NaO4, and its structural formula is represented by the following. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. COUMADIN tablets for oral use also contain. COUMADIN for injection for intravenous use is supplied as a sterile, lyophilized powder, which, after reconstitution with 2.7 mL Sterile Water for Injection, contains."
},
{
"NDCCode": "43386-492-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (43386-492-01) ",
"NDC11Code": "43386-0492-01",
"ProductNDC": "43386-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204407",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE",
"StrengthNumber": "325; 7.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170224",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics] : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains Oxycodone Hydrochloride and Acetaminophen in the following strengths:. Oxycodone Hydrochloride, USP.................................................................. 2.5 mg*. (*2.5 mg Oxycodone Hydrochloride is equivalent to 2.2409 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 5 mg*. (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 7.5 mg*. (*7.5 mg Oxycodone Hydrochloride is equivalent to 6.7228 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 10 mg*. (*10 mg Oxycodone Hydrochloride is equivalent to 8.9637 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. All Strengths of Oxycodone and Acetaminophen Tablets also contains the following inactive ingredients: Colloidal silicon dioxide, povidone, cross-linked povidone, corn starch, pregelatinized starch, microcrystalline cellulose, sodium starch glycolate, and stearic acid. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C18H21NO4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula. C18H21NO4 ·HCl MW 351.82. Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, free flowing granules. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. C8H9NO2 MW 151.16."
},
{
"NDCCode": "43386-492-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (43386-492-05) ",
"NDC11Code": "43386-0492-05",
"ProductNDC": "43386-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204407",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE",
"StrengthNumber": "325; 7.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170224",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics] : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains Oxycodone Hydrochloride and Acetaminophen in the following strengths:. Oxycodone Hydrochloride, USP.................................................................. 2.5 mg*. (*2.5 mg Oxycodone Hydrochloride is equivalent to 2.2409 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 5 mg*. (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 7.5 mg*. (*7.5 mg Oxycodone Hydrochloride is equivalent to 6.7228 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 10 mg*. (*10 mg Oxycodone Hydrochloride is equivalent to 8.9637 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. All Strengths of Oxycodone and Acetaminophen Tablets also contains the following inactive ingredients: Colloidal silicon dioxide, povidone, cross-linked povidone, corn starch, pregelatinized starch, microcrystalline cellulose, sodium starch glycolate, and stearic acid. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C18H21NO4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula. C18H21NO4 ·HCl MW 351.82. Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, free flowing granules. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. C8H9NO2 MW 151.16."
},
{
"NDCCode": "43386-492-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (43386-492-10) ",
"NDC11Code": "43386-0492-10",
"ProductNDC": "43386-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone And Acetaminophen",
"NonProprietaryName": "Oxycodone And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204407",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE",
"StrengthNumber": "325; 7.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2024-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170224",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone and Acetaminophen Tablets is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics] : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains Oxycodone Hydrochloride and Acetaminophen in the following strengths:. Oxycodone Hydrochloride, USP.................................................................. 2.5 mg*. (*2.5 mg Oxycodone Hydrochloride is equivalent to 2.2409 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 5 mg*. (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 7.5 mg*. (*7.5 mg Oxycodone Hydrochloride is equivalent to 6.7228 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 10 mg*. (*10 mg Oxycodone Hydrochloride is equivalent to 8.9637 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. All Strengths of Oxycodone and Acetaminophen Tablets also contains the following inactive ingredients: Colloidal silicon dioxide, povidone, cross-linked povidone, corn starch, pregelatinized starch, microcrystalline cellulose, sodium starch glycolate, and stearic acid. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C18H21NO4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula. C18H21NO4 ·HCl MW 351.82. Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, free flowing granules. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. C8H9NO2 MW 151.16."
},
{
"NDCCode": "46708-492-08",
"PackageDescription": "80 BLISTER PACK in 1 CARTON (46708-492-08) / 8 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "46708-0492-08",
"ProductNDC": "46708-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213223",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200115",
"SamplePackage": "N",
"IndicationAndUsage": "Tizanidine hydrochloride is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine hydrochloride capsules should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration (2.1)].",
"Description": "Tizanidine hydrochloride is a central alpha2-adrenergic agonist. Tizanidine hydrochloride is almost white to slightly yellow crystalline substance. Tizanidine is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine’s molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules are supplied as 2, 4, and 6 mg capsules for oral administration. Tizanidine hydrochloride capsules contain the active ingredient, tizanidine hydrochloride (2.29 mg equivalent to 2 mg tizanidine base, 4.58 mg equivalent to 4 mg tizanidine base, and 6.87 mg equivalent to 6 mg tizanidine base), and the inactive ingredients, sugar spheres (composed of sucrose, corn starch and purified water), hypromellose, colloidal silicon dioxide, methacrylic acid and ethyl acrylate copolymer, triethyl citrate and talc. Each empty hard gelatin capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate and FD&C Blue No. 1. Additionally, 4 mg and 6 mg empty hard gelatin capsule shell contains FD&C Red No. 3. The printing ink contains shellac, potassium hydroxide and iron oxide black."
},
{
"NDCCode": "46708-492-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (46708-492-30) ",
"NDC11Code": "46708-0492-30",
"ProductNDC": "46708-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213223",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200115",
"SamplePackage": "N",
"IndicationAndUsage": "Tizanidine hydrochloride is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine hydrochloride capsules should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration (2.1)].",
"Description": "Tizanidine hydrochloride is a central alpha2-adrenergic agonist. Tizanidine hydrochloride is almost white to slightly yellow crystalline substance. Tizanidine is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine’s molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules are supplied as 2, 4, and 6 mg capsules for oral administration. Tizanidine hydrochloride capsules contain the active ingredient, tizanidine hydrochloride (2.29 mg equivalent to 2 mg tizanidine base, 4.58 mg equivalent to 4 mg tizanidine base, and 6.87 mg equivalent to 6 mg tizanidine base), and the inactive ingredients, sugar spheres (composed of sucrose, corn starch and purified water), hypromellose, colloidal silicon dioxide, methacrylic acid and ethyl acrylate copolymer, triethyl citrate and talc. Each empty hard gelatin capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate and FD&C Blue No. 1. Additionally, 4 mg and 6 mg empty hard gelatin capsule shell contains FD&C Red No. 3. The printing ink contains shellac, potassium hydroxide and iron oxide black."
},
{
"NDCCode": "46708-492-41",
"PackageDescription": "150 CAPSULE in 1 BOTTLE (46708-492-41) ",
"NDC11Code": "46708-0492-41",
"ProductNDC": "46708-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213223",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200115",
"SamplePackage": "N",
"IndicationAndUsage": "Tizanidine hydrochloride is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine hydrochloride capsules should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration (2.1)].",
"Description": "Tizanidine hydrochloride is a central alpha2-adrenergic agonist. Tizanidine hydrochloride is almost white to slightly yellow crystalline substance. Tizanidine is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine’s molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules are supplied as 2, 4, and 6 mg capsules for oral administration. Tizanidine hydrochloride capsules contain the active ingredient, tizanidine hydrochloride (2.29 mg equivalent to 2 mg tizanidine base, 4.58 mg equivalent to 4 mg tizanidine base, and 6.87 mg equivalent to 6 mg tizanidine base), and the inactive ingredients, sugar spheres (composed of sucrose, corn starch and purified water), hypromellose, colloidal silicon dioxide, methacrylic acid and ethyl acrylate copolymer, triethyl citrate and talc. Each empty hard gelatin capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate and FD&C Blue No. 1. Additionally, 4 mg and 6 mg empty hard gelatin capsule shell contains FD&C Red No. 3. The printing ink contains shellac, potassium hydroxide and iron oxide black."
},
{
"NDCCode": "46708-492-91",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (46708-492-91) ",
"NDC11Code": "46708-0492-91",
"ProductNDC": "46708-492",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tizanidine Hydrochloride",
"NonProprietaryName": "Tizanidine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20200115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213223",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "TIZANIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200115",
"SamplePackage": "N",
"IndicationAndUsage": "Tizanidine hydrochloride is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine hydrochloride capsules should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration (2.1)].",
"Description": "Tizanidine hydrochloride is a central alpha2-adrenergic agonist. Tizanidine hydrochloride is almost white to slightly yellow crystalline substance. Tizanidine is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine’s molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules are supplied as 2, 4, and 6 mg capsules for oral administration. Tizanidine hydrochloride capsules contain the active ingredient, tizanidine hydrochloride (2.29 mg equivalent to 2 mg tizanidine base, 4.58 mg equivalent to 4 mg tizanidine base, and 6.87 mg equivalent to 6 mg tizanidine base), and the inactive ingredients, sugar spheres (composed of sucrose, corn starch and purified water), hypromellose, colloidal silicon dioxide, methacrylic acid and ethyl acrylate copolymer, triethyl citrate and talc. Each empty hard gelatin capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate and FD&C Blue No. 1. Additionally, 4 mg and 6 mg empty hard gelatin capsule shell contains FD&C Red No. 3. The printing ink contains shellac, potassium hydroxide and iron oxide black."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0492-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0492-2)</PackageDescription>
<NDC11Code>49288-0492-02</NDC11Code>
<ProductNDC>49288-0492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Sweet Vernal Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Sweet Vernal Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970613</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103624</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>ANTHOXANTHUM ODORATUM POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.</IndicationAndUsage>
<Description>DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>49288-0492-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0492-3)</PackageDescription>
<NDC11Code>49288-0492-03</NDC11Code>
<ProductNDC>49288-0492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Sweet Vernal Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Sweet Vernal Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970613</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103624</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>ANTHOXANTHUM ODORATUM POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.</IndicationAndUsage>
<Description>DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>49288-0492-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0492-4)</PackageDescription>
<NDC11Code>49288-0492-04</NDC11Code>
<ProductNDC>49288-0492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Sweet Vernal Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Sweet Vernal Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970613</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103624</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>ANTHOXANTHUM ODORATUM POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.</IndicationAndUsage>
<Description>DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>49288-0492-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0492-5)</PackageDescription>
<NDC11Code>49288-0492-05</NDC11Code>
<ProductNDC>49288-0492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Sweet Vernal Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Sweet Vernal Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970613</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103624</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>ANTHOXANTHUM ODORATUM POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>INDICATIONS AND USAGE Allergenic extract is indicated for diagnostic testing and treatment (immunotherapy) of patients whose histories indicate allergic symptoms upon natural exposure to grass allergens. Confirmation is determined by skin testing. 10,000 BAU/ml extracts are intended for percutaneous testing. If negative, 100,000 BAU/ml products can be used for percutaneous test. Dilutions made from 10,000 BAU/ml products are indicated for immunotherapy of previously untreated patients. If 10,000 BAU/ml product is tolerated and symptoms persist, dilutions made from 100,000 BAU/ml can be administered. Standardized Grass Pollen extracts labeled in Bioequivalent Allergy Units (BAU/ml) are not interchangeable with grass pollen extracts labeled In Allergy Units (AU/ml) or with non-standardized grass pollen extracts.</IndicationAndUsage>
<Description>DESCRIPTION Antigen Laboratories' Standardized Grass Pollen allergenic extracts are sterile and intended for dilution prior to skin testing and/or immunotherapy. The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Standardized Grass Pollen allergenic extract labeled in BAU/ml is not interchangeable with grass pollen extract labeled in AU/ml or with non-standardized grass pollen extract. Potency of Standardized Grass Pollen allergenic extract is determined by comparison to a Center for Biologics Evaluation and Research (CBER) approved reference. References are available for pollen extracts of Orchard Grass (Dactylis glomerata), Perennial Rye Grass (Lolium perenne), Timothy Grass (Phleum pratense), Redtop Grass (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda Grass (Cynodon dactylon), Meadow Fescue Grass (Festuca elatior), and Sweet Vernal Grass (Anthoxanthum odoratum). Quantitative skin testing is used by CBER to establish reference's potency as Bioequivalent Allergy Units (BAU). CBER reference labeled 10,000 BAU/ml produces a sum of erythema diameter of 50 mm with highly puncture reactive subjects at an intradermal dilution of approximately 1:500,000.11,17 CBER references labeled 100,000 BAU/ml produce a SumE=50 mm at an intradermal dilution of 1:5,000,000. Relative potency of Standardized Grass Pollen allergenic extracts to CBER reference is determined by Enzyme-linked Immunosorbent Assay (ELISA). In addition to relative potency testing of Standardized Grass Pollen extract the following testing is performed: 1. Microscopic examination to confirm identity and purity of source pollens. 2. lsoelectric focusing (IEF) pattern of source material is compared to respective CBER reference extract. 3. lsoelectric focusing pattern of final 100,000 BAU/ml (10,000 BAU/ml Bermuda Grass) product is compared to CBER reference extract. 4. Ninhydrin Protein Analysis. 5. Glycerine Analysis. (A minimum of 50% v/v glycerine for optimal stability during the entire dating period.) 6. Sterility Testing. 7. Animal Safety Testing. Standardized Grass Pollen allergenic extracts are extracted at 1:10 weight to volume (w/v) ratio of source material to extraction fluid. Bermuda Grass is only available in 10,000 BAU/ml. Standardized Grass Pollen extracts are diluted after extraction to fall in acceptable relative potency range for a 100,000 BAU/ml or 10,000 BAU/ml (Bermuda Grass) product. Standardized Grass Pollen allergenic extracts (except Bermuda) of 10,000 BAU/ml potency are prepared by diluting the 100,000 BAU/ml extract 1:10 with extracting fluid. Various mixtures of eight Standardized Grass Pollen extracts are available. Mixtures of Standardized Grass Pollen extracts with non-standardized grass pollen extracts are available. Concentrations of Standardized Grass Pollen extracts (BAU/ml) and non-standardized grass pollen extracts (w/v) in a mixture are printed on the last page of this circular, if applicable. Active Ingredients: Allergens are described by common and scientific name on container label or last page of this circular. Preservative is 50% v/v glycerine. Inactive ingredients are 0.95% sodium chloride, 0.24% sodium bicarbonate and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>37662-0492-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-0492-2) </PackageDescription>
<NDC11Code>37662-0492-02</NDC11Code>
<ProductNDC>37662-0492</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Coccus Cacti</ProprietaryName>
<NonProprietaryName>Coccus Cacti</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220610</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>PROTORTONIA CACTI</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-06-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67296-0492-2</NDCCode>
<PackageDescription>15 TABLET in 1 BOTTLE (67296-0492-2)</PackageDescription>
<NDC11Code>67296-0492-02</NDC11Code>
<ProductNDC>67296-0492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen Tablets</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040748</ApplicationNumber>
<LabelerName>RedPharm Drug Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>7.5; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-01-01</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>69968-0492-1</NDCCode>
<PackageDescription>1 KIT in 1 CONTAINER (69968-0492-1) * 300 mL in 1 BOTTLE, PUMP * 300 mL in 1 BOTTLE * 200 mL in 1 BOTTLE * 57 g in 1 TUBE (69968-0219-2) </PackageDescription>
<NDC11Code>69968-0492-01</NDC11Code>
<ProductNDC>69968-0492</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Johnsons First Touch Baby Gift Set</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>Johnson & Johnson Consumer Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2020-08-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-0492-2</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (71335-0492-2) </PackageDescription>
<NDC11Code>71335-0492-02</NDC11Code>
<ProductNDC>71335-0492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091672</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>80425-0492-2</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (80425-0492-2) </PackageDescription>
<NDC11Code>80425-0492-02</NDC11Code>
<ProductNDC>80425-0492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ciprofloxacin</ProprietaryName>
<NonProprietaryName>Ciprofolxacin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208921</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>CIPROFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A2 Inhibitors [MoA], Fluoroquinolone Antibacterial [EPC], Fluoroquinolones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Click here to enter Indications.</IndicationAndUsage>
<Description>Ciprofloxacin Tablets, USP are synthetic antimicrobial agents for oral administration. Ciprofloxacin hydrochloride, USP, a fluoroquinolone, is the monohydrochloride monohydrate salt of 1-cyclopropyl- 6-fluoro- 1,4-dihydro- 4-oxo- 7-(1-piperazinyl)- 3-quinolinecarboxylic acid. It is a faintly yellowish to light yellow crystalline substance with a molecular weight of 385.8. Its empirical formula is C 17H 18FN 3O 3HClH 2O and its chemical structure is as follows:. Ciprofloxacin is 1-cyclopropyl- 6-fluoro- 1,4-dihydro- 4-oxo- 7-(1-piperazinyl)- 3-quinolinecarboxylic acid. Its empirical formula is C17H18FN3O3 and its molecular weight is 331.4. It is a faintly yellowish to light yellow crystalline substance and its chemical structure is as follows. Ciprofloxacin film-coated tablets are available in 250 mg and 500 mg (ciprofloxacin equivalent) strengths. Ciprofloxacin Tablets, USP are white. The inactive ingredients are colloidal silicon dioxide, corn starch, partially pregelatinized maize starch, magnesium stearate, microcrystalline cellulose, sodium starch glycolate (starch from non-GMO potatoes), hypromellose, titanium dioxide and PEG.</Description>
</NDC>
<NDC>
<NDCCode>10135-492-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (10135-492-01) </PackageDescription>
<NDC11Code>10135-0492-01</NDC11Code>
<ProductNDC>10135-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Salsalate</ProprietaryName>
<NonProprietaryName>Salsalate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070401</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>SALSALATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Salsalate tablets, USP and other treatment options before deciding to use Salsalate tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Salsalate is indicated for relief of the signs and symptoms of rheumatoid arthritis, osteoarthritis and related rheumatic disorder.</IndicationAndUsage>
<Description>Salsalate, is a nonsteroidal anti-inflammatory agent for oral administration. Chemically, salsalate (salicylsalicylic acid or 2-hydroxy-benzoic acid, 2- carboxyphenyl ester) is a dimer of salicylic acid; its structural formula is shown below. Chemical Structure. Tablets. Inactive Ingredients: Carnauba wax, Colloidal Silicon Dioxide, Croscarmellose Sodium, D&C Yellow # 10, Hypromellose, Microcrystalline Cellulose, Polyethylene Glycol, Stearic Acid, and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>10135-492-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (10135-492-05) </PackageDescription>
<NDC11Code>10135-0492-05</NDC11Code>
<ProductNDC>10135-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Salsalate</ProprietaryName>
<NonProprietaryName>Salsalate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070401</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>SALSALATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Salsalate tablets, USP and other treatment options before deciding to use Salsalate tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Salsalate is indicated for relief of the signs and symptoms of rheumatoid arthritis, osteoarthritis and related rheumatic disorder.</IndicationAndUsage>
<Description>Salsalate, is a nonsteroidal anti-inflammatory agent for oral administration. Chemically, salsalate (salicylsalicylic acid or 2-hydroxy-benzoic acid, 2- carboxyphenyl ester) is a dimer of salicylic acid; its structural formula is shown below. Chemical Structure. Tablets. Inactive Ingredients: Carnauba wax, Colloidal Silicon Dioxide, Croscarmellose Sodium, D&C Yellow # 10, Hypromellose, Microcrystalline Cellulose, Polyethylene Glycol, Stearic Acid, and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>10135-492-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (10135-492-10) </PackageDescription>
<NDC11Code>10135-0492-10</NDC11Code>
<ProductNDC>10135-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Salsalate</ProprietaryName>
<NonProprietaryName>Salsalate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070401</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>SALSALATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Salsalate tablets, USP and other treatment options before deciding to use Salsalate tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Salsalate is indicated for relief of the signs and symptoms of rheumatoid arthritis, osteoarthritis and related rheumatic disorder.</IndicationAndUsage>
<Description>Salsalate, is a nonsteroidal anti-inflammatory agent for oral administration. Chemically, salsalate (salicylsalicylic acid or 2-hydroxy-benzoic acid, 2- carboxyphenyl ester) is a dimer of salicylic acid; its structural formula is shown below. Chemical Structure. Tablets. Inactive Ingredients: Carnauba wax, Colloidal Silicon Dioxide, Croscarmellose Sodium, D&C Yellow # 10, Hypromellose, Microcrystalline Cellulose, Polyethylene Glycol, Stearic Acid, and Titanium Dioxide.</Description>
</NDC>
<NDC>
<NDCCode>16729-492-12</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (16729-492-12) </PackageDescription>
<NDC11Code>16729-0492-12</NDC11Code>
<ProductNDC>16729-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dofetilide</ProprietaryName>
<NonProprietaryName>Dofetilide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200820</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213338</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>DOFETILIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dofetilide capsules are indicated for the maintenance of normal sinus rhythm (delay in time to recurrence of atrial fibrillation/atrial flutter [AF/AFl]) in patients with atrial fibrillation/atrial flutter of greater than one week duration who have been converted to normal sinus rhythm. Because dofetilide can cause life threatening ventricular arrhythmias, it should be reserved for patients in whom atrial fibrillation/atrial flutter is highly symptomatic. In general, antiarrhythmic therapy for atrial fibrillation/atrial flutter aims to prolong the time in normal sinus rhythm. Recurrence is expected in some patients (see CLINICAL STUDIES).</IndicationAndUsage>
<Description>Dofetilide is an antiarrhythmic drug with Class III (cardiac action potential duration prolonging) properties. Its empirical formula is C 19H 27N 3O 5S 2and it has a molecular weight of 441.6. The structural formula is. The chemical name for dofetilide is: N-[4-[2-[methyl[2-[4-[(methylsulfonyl)amino]phenoxy]ethyl]amino]ethyl]phenyl]-methanesulfonamide. Dofetilide is a white to off-white powder. It is very slightly soluble in water and propan-2-ol and is soluble in 0.1M aqueous sodium hydroxide, acetone, and aqueous 0.1M hydrochloric acid. Dofetilide capsules contain the following inactive ingredients: Capsule fill:colloidal anhydrous silica, magnesium stearate, maize starch, microcrystalline cellulose Capsule shell:gelatin, titanium dioxide, and FD&C Yellow 6 Imprinting ink:iron oxide black, shellac, potassium hydroxide Dofetilide capsules are supplied for oral administration in three dosage strengths: 125 mcg (0.125 mg) light orange and white capsules, 250 mcg (0.25 mg) peach capsules, and 500 mcg (0.5 mg) peach and white capsules.</Description>
</NDC>
<NDC>
<NDCCode>24090-492-94</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (24090-492-94) > 7 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>24090-0492-94</NDC11Code>
<ProductNDC>24090-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tirosint</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021924</ApplicationNumber>
<LabelerName>Akrimax Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>l-Thyroxine [EPC],Thyroxine [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>31722-492-31</NDCCode>
<PackageDescription>5 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (31722-492-31) / 10 mL in 1 VIAL, PHARMACY BULK PACKAGE (31722-492-10) </PackageDescription>
<NDC11Code>31722-0492-31</NDC11Code>
<ProductNDC>31722-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Selenious Acid</ProprietaryName>
<NonProprietaryName>Selenious Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219633</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SELENIUM</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Selenious acid injection is indicated in adult and pediatric patients as a source of selenium for parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>Selenious acid injection, USP is a sterile, non-pyrogenic, clear, colorless solution intended for use as a trace element and additive to intravenous solutions for parenteral nutrition. Each 600 mcg/10 mL Pharmacy Bulk Package vial contains 10 mL of selenious acid solution. Each 6 mcg/mL single-dose vial contains 2 mL of selenious acid solution. None of the presentations contain preservatives. Each mL of the 60 mcg/mL strength contains 60 mcg of selenium present as 98 mcg of selenious acid, nitric acid for pH adjustment (1.8 to 2.4), and water for injection q.s. Each mL of the 6 mcg/mL strength contains 6 mcg of selenium present as 9.8 mcg of selenious acid, nitric acid for pH adjustment (1.8 to 2.4), and water for injection q.s. Selenious acid injection 60 mcg/mL contains no more than 2,500 mcg/L of aluminum and has a calculated osmolarity of 16 mOsmol/L. Selenious acid injection 6 mcg/mL contains no more than 900 mcg/L of aluminum and has a calculated osmolarity of 13 mOsmol/L. Selenious acid has a molecular weight of 128.97 g/mol and a formula of H 2SeO 3. The structural formula is:.</Description>
</NDC>
<NDC>
<NDCCode>33342-492-11</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (33342-492-11) </PackageDescription>
<NDC11Code>33342-0492-11</NDC11Code>
<ProductNDC>33342-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carbidopa, Levodopa And Entacapone</ProprietaryName>
<NonProprietaryName>Carbidopa, Levodopa And Entacapone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214495</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>CARBIDOPA; LEVODOPA; ENTACAPONE</SubstanceName>
<StrengthNumber>18.75; 75; 200</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC], Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carbidopa, levodopa and entacapone tablets, is indicated for the treatment of Parkinson’s disease. Carbidopa, levodopa and entacapone tablets can be used: : 1 To substitute (with equivalent strengths of each of the three components) carbidopa/levodopa and entacapone previously administered as individual products., 2 To replace carbidopa/levodopa therapy (without entacapone) when patients experience the signs and symptoms of end-of-dose “wearing-off” and when they have been taking a total daily dose of levodopa of 600 mg or less and have not been experiencing dyskinesias. .</IndicationAndUsage>
<Description>Carbidopa, levodopa and entacapone tablets is a combination of carbidopa, levodopa, and entacapone for the treatment of Parkinson’s disease. Carbidopa, an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.3. It is designated chemically as (-)-L-(α-hydrazino-(α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its empirical formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa, which has a molecular weight of 226.3. Levodopa, an aromatic amino acid, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 197.2. It is designated chemically as (-)-L-α-amino-β-(3,4-dihydroxybenzene) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Entacapone, a COMT inhibitor, is a nitro-catechol-structured compound with a molecular weight of 305.3. The chemical name of entacapone is (E)-2-cyano-3-(3,4-dihydroxy-5-nitrophenyl)-N,N-diethyl-2-propenamide. Its empirical formula is C14H15N3O5 and its structural formula is. Carbidopa, levodopa and entacapone film coated tablets is supplied as tablets in 6 strengths: 12.5 mg of carbidopa, USP; 50 mg of levodopa, USP and 200 mg of entacapone USP 18.75 mg of carbidopa, USP; 75 mg of levodopa, USP and 200 mg of entacapone USP 25 mg of carbidopa, USP; 100 mg of levodopa, USP and 200 mg of entacapone USP 31.25 mg of carbidopa, USP; 125 mg of levodopa, USP and 200 mg of entacapone USP 37.5 mg of carbidopa, USP; 150 mg of levodopa, USP and 200 mg of entacapone USP 50 mg of carbidopa, USP; 200 mg of levodopa, USP and 200 mg of entacapone USP. Inactive Ingredients: Colloidal silicon dioxide, Croscarmellose sodium, Crospovidone, Magnesium stearate, Maltodextrin, Microcrystalline cellulose, Povidone. The coating material Instacoat Brown HIS consists of Hypromellose, Polysorbate 80, Red Iron Oxide, Titanium Dioxide, Yellow Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>33342-492-12</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (33342-492-12) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>33342-0492-12</NDC11Code>
<ProductNDC>33342-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carbidopa, Levodopa And Entacapone</ProprietaryName>
<NonProprietaryName>Carbidopa, Levodopa And Entacapone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214495</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>CARBIDOPA; LEVODOPA; ENTACAPONE</SubstanceName>
<StrengthNumber>18.75; 75; 200</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Amino Acids, Aromatic [CS], Aromatic Amino Acid [EPC], Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carbidopa, levodopa and entacapone tablets, is indicated for the treatment of Parkinson’s disease. Carbidopa, levodopa and entacapone tablets can be used: : 1 To substitute (with equivalent strengths of each of the three components) carbidopa/levodopa and entacapone previously administered as individual products., 2 To replace carbidopa/levodopa therapy (without entacapone) when patients experience the signs and symptoms of end-of-dose “wearing-off” and when they have been taking a total daily dose of levodopa of 600 mg or less and have not been experiencing dyskinesias. .</IndicationAndUsage>
<Description>Carbidopa, levodopa and entacapone tablets is a combination of carbidopa, levodopa, and entacapone for the treatment of Parkinson’s disease. Carbidopa, an inhibitor of aromatic amino acid decarboxylation, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 244.3. It is designated chemically as (-)-L-(α-hydrazino-(α-methyl-β-(3,4-dihydroxybenzene) propanoic acid monohydrate. Its empirical formula is C10H14N2O4H2O, and its structural formula is. Tablet content is expressed in terms of anhydrous carbidopa, which has a molecular weight of 226.3. Levodopa, an aromatic amino acid, is a white, crystalline compound, slightly soluble in water, with a molecular weight of 197.2. It is designated chemically as (-)-L-α-amino-β-(3,4-dihydroxybenzene) propanoic acid. Its empirical formula is C9H11NO4, and its structural formula is. Entacapone, a COMT inhibitor, is a nitro-catechol-structured compound with a molecular weight of 305.3. The chemical name of entacapone is (E)-2-cyano-3-(3,4-dihydroxy-5-nitrophenyl)-N,N-diethyl-2-propenamide. Its empirical formula is C14H15N3O5 and its structural formula is. Carbidopa, levodopa and entacapone film coated tablets is supplied as tablets in 6 strengths: 12.5 mg of carbidopa, USP; 50 mg of levodopa, USP and 200 mg of entacapone USP 18.75 mg of carbidopa, USP; 75 mg of levodopa, USP and 200 mg of entacapone USP 25 mg of carbidopa, USP; 100 mg of levodopa, USP and 200 mg of entacapone USP 31.25 mg of carbidopa, USP; 125 mg of levodopa, USP and 200 mg of entacapone USP 37.5 mg of carbidopa, USP; 150 mg of levodopa, USP and 200 mg of entacapone USP 50 mg of carbidopa, USP; 200 mg of levodopa, USP and 200 mg of entacapone USP. Inactive Ingredients: Colloidal silicon dioxide, Croscarmellose sodium, Crospovidone, Magnesium stearate, Maltodextrin, Microcrystalline cellulose, Povidone. The coating material Instacoat Brown HIS consists of Hypromellose, Polysorbate 80, Red Iron Oxide, Titanium Dioxide, Yellow Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>41250-492-24</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (41250-492-24) / 12 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>41250-0492-24</NDC11Code>
<ProductNDC>41250-492</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Laxative Pills</ProprietaryName>
<ProprietaryNameSuffix>Maximum Strength</ProprietaryNameSuffix>
<NonProprietaryName>Sennosides</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160331</StartMarketingDate>
<EndMarketingDate>20250331</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>MEIJER, INC.</LabelerName>
<SubstanceName>SENNOSIDES</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160331</StartMarketingDatePackage>
<EndMarketingDatePackage>20250331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves occasional constipation (irregularity) . generally produces bowel movement in 6 to 12 hours.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41520-492-24</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (41520-492-24) > 12 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>41520-0492-24</NDC11Code>
<ProductNDC>41520-492</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Laxative Pills</ProprietaryName>
<ProprietaryNameSuffix>Maximum Strength</ProprietaryNameSuffix>
<NonProprietaryName>Sennosides</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160531</StartMarketingDate>
<EndMarketingDate>20250530</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>Care One (American Sales Company)</LabelerName>
<SubstanceName>SENNOSIDES</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160531</StartMarketingDatePackage>
<EndMarketingDatePackage>20250530</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves occasional constipation (irregularity) . generally produces bowel movement in 6 to 12 hours.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42291-492-09</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (42291-492-09) / 90 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>42291-0492-09</NDC11Code>
<ProductNDC>42291-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pirfenidone</ProprietaryName>
<NonProprietaryName>Pirfenidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231018</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212570</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>PIRFENIDONE</SubstanceName>
<StrengthNumber>801</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Pyridone [EPC], Pyridones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231018</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pirfenidone tablets are indicated for the treatment of idiopathic pulmonary fibrosis (IPF).</IndicationAndUsage>
<Description>Pirfenidone belongs to the chemical class of pyridone. Pirfenidone tablets are available as film-coated tablets containing 267 mg (yellow) and 801 mg (brown) pirfenidone. Pirfenidone has a molecular formula of C 12H 11NO and a molecular weight of 185.22 g/mol. Pirfenidone has the following structural formula, which has been referred to as 5-methyl-1-phenylpyridin-2-one. Pirfenidone is a white to pale yellow, non-hygroscopic, crystalline powder. It is sparingly soluble in water, freely soluble in ethanol (96%), and slightly soluble in heptane. The melting point range is 107°C to 111°C. Pirfenidone Tablets are available for oral administration, each pirfenidone tablet contains pirfenidone, 267 mg or 801 mg, as active ingredient and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, ferrosoferric oxide (801 mg), hypromellose, iron oxide red (801 mg), iron oxide yellow (267 mg), lactose monohydrate, magnesium stearate, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>42549-492-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (42549-492-30)</PackageDescription>
<NDC11Code>42549-0492-30</NDC11Code>
<ProductNDC>42549-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxepin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxepin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19871109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071669</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Doxepin HCl is recommended for the treatment of: 1 Psychoneurotic patients with depression and/or anxiety., 2 Depression and/or anxiety associated with alcoholism (not to be taken concomitantly with alcohol)., 3 Depression and/or anxiety associated with organic disease (the possibility of drug interaction should be considered if the patient is receiving other drugs concomitantly)., 4 Psychotic depressive disorders with associated anxiety including involutional depression and manic-depressive disorders.</IndicationAndUsage>
<Description>Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19H21NOHCl having a molecular weight of 315.84. It is a white crystalline solid readily soluble in water, lower alcohols and chloroform. Its structural formula is. Chemistry:Doxepin HCl is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of: 1-Propanamine, 3-dibenz[b,e]oxepin-11(6 H)ylidene-N,N-dimethyl-hydrochloride. Each doxepin hydrochloride capsule is equivalent to 10 mg, 25 mg, 50 mg, 75 mg, 100 mg and 150mg of doxepin for oral administration. Each capsule contains the following inactive ingredients: corn starch, D&C Yellow #10, FD&C Blue #1, FD&C Blue #2, FD&C Red #40, gelatin, magnesium stearate, pharmaceutical glaze, sodium laurel sulfate, synthetic black iron oxide, titanium dioxide and other ingredients. In addition, the 10 mg capsule contains FD&C Yellow #6; the 25 mg and 50 mg capsules contain FD&C Yellow #6 and propylene glycol; the 75 mg capsule contains FD&C Green #3 and propylene glycol; and the 100 mg capsule contains FD&C Green #3.</Description>
</NDC>
<NDC>
<NDCCode>43353-492-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (43353-492-30)</PackageDescription>
<NDC11Code>43353-0492-30</NDC11Code>
<ProductNDC>43353-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Coumadin</ProprietaryName>
<NonProprietaryName>Warfarin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA009218</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, Inc.</LabelerName>
<SubstanceName>WARFARIN SODIUM</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vitamin K Antagonist [EPC],Vitamin K Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>COUMADIN® is indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.</IndicationAndUsage>
<Description>COUMADIN (warfarin sodium) is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its empirical formula is C19H15NaO4, and its structural formula is represented by the following. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. COUMADIN tablets for oral use also contain. COUMADIN for injection for intravenous use is supplied as a sterile, lyophilized powder, which, after reconstitution with 2.7 mL Sterile Water for Injection, contains.</Description>
</NDC>
<NDC>
<NDCCode>43353-492-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (43353-492-60)</PackageDescription>
<NDC11Code>43353-0492-60</NDC11Code>
<ProductNDC>43353-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Coumadin</ProprietaryName>
<NonProprietaryName>Warfarin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA009218</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, Inc.</LabelerName>
<SubstanceName>WARFARIN SODIUM</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Vitamin K Antagonist [EPC],Vitamin K Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>COUMADIN® is indicated for: 1 Prophylaxis and treatment of venous thrombosis and its extension, pulmonary embolism (PE)., 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation (AF) and/or cardiac valve replacement., 3 Reduction in the risk of death, recurrent myocardial infarction (MI), and thromboembolic events such as stroke or systemic embolization after myocardial infarction.</IndicationAndUsage>
<Description>COUMADIN (warfarin sodium) is an anticoagulant that acts by inhibiting vitamin K-dependent coagulation factors. Chemically, it is 3-(α-acetonylbenzyl)-4-hydroxycoumarin and is a racemic mixture of the R- and S-enantiomers. Crystalline warfarin sodium is an isopropanol clathrate. Its empirical formula is C19H15NaO4, and its structural formula is represented by the following. Crystalline warfarin sodium occurs as a white, odorless, crystalline powder that is discolored by light. It is very soluble in water, freely soluble in alcohol, and very slightly soluble in chloroform and ether. COUMADIN tablets for oral use also contain. COUMADIN for injection for intravenous use is supplied as a sterile, lyophilized powder, which, after reconstitution with 2.7 mL Sterile Water for Injection, contains.</Description>
</NDC>
<NDC>
<NDCCode>43386-492-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (43386-492-01) </PackageDescription>
<NDC11Code>43386-0492-01</NDC11Code>
<ProductNDC>43386-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204407</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 7.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics] : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains Oxycodone Hydrochloride and Acetaminophen in the following strengths:. Oxycodone Hydrochloride, USP.................................................................. 2.5 mg*. (*2.5 mg Oxycodone Hydrochloride is equivalent to 2.2409 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 5 mg*. (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 7.5 mg*. (*7.5 mg Oxycodone Hydrochloride is equivalent to 6.7228 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 10 mg*. (*10 mg Oxycodone Hydrochloride is equivalent to 8.9637 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. All Strengths of Oxycodone and Acetaminophen Tablets also contains the following inactive ingredients: Colloidal silicon dioxide, povidone, cross-linked povidone, corn starch, pregelatinized starch, microcrystalline cellulose, sodium starch glycolate, and stearic acid. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C18H21NO4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula. C18H21NO4 ·HCl MW 351.82. Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, free flowing granules. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. C8H9NO2 MW 151.16.</Description>
</NDC>
<NDC>
<NDCCode>43386-492-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (43386-492-05) </PackageDescription>
<NDC11Code>43386-0492-05</NDC11Code>
<ProductNDC>43386-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204407</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 7.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics] : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains Oxycodone Hydrochloride and Acetaminophen in the following strengths:. Oxycodone Hydrochloride, USP.................................................................. 2.5 mg*. (*2.5 mg Oxycodone Hydrochloride is equivalent to 2.2409 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 5 mg*. (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 7.5 mg*. (*7.5 mg Oxycodone Hydrochloride is equivalent to 6.7228 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 10 mg*. (*10 mg Oxycodone Hydrochloride is equivalent to 8.9637 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. All Strengths of Oxycodone and Acetaminophen Tablets also contains the following inactive ingredients: Colloidal silicon dioxide, povidone, cross-linked povidone, corn starch, pregelatinized starch, microcrystalline cellulose, sodium starch glycolate, and stearic acid. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C18H21NO4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula. C18H21NO4 ·HCl MW 351.82. Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, free flowing granules. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. C8H9NO2 MW 151.16.</Description>
</NDC>
<NDC>
<NDCCode>43386-492-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (43386-492-10) </PackageDescription>
<NDC11Code>43386-0492-10</NDC11Code>
<ProductNDC>43386-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
<NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204407</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; OXYCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 7.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone and Acetaminophen Tablets is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, which can occur at any dosage or duration [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics] : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Oxycodone Hydrochloride and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration, contains Oxycodone Hydrochloride and Acetaminophen in the following strengths:. Oxycodone Hydrochloride, USP.................................................................. 2.5 mg*. (*2.5 mg Oxycodone Hydrochloride is equivalent to 2.2409 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 5 mg*. (*5 mg Oxycodone Hydrochloride is equivalent to 4.4815 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 7.5 mg*. (*7.5 mg Oxycodone Hydrochloride is equivalent to 6.7228 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. Oxycodone Hydrochloride, USP.................................................................. 10 mg*. (*10 mg Oxycodone Hydrochloride is equivalent to 8.9637 mg of Oxycodone). Acetaminophen, USP...................................................................................... 325 mg. All Strengths of Oxycodone and Acetaminophen Tablets also contains the following inactive ingredients: Colloidal silicon dioxide, povidone, cross-linked povidone, corn starch, pregelatinized starch, microcrystalline cellulose, sodium starch glycolate, and stearic acid. Oxycodone Hydrochloride and Acetaminophen Tablets contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white to off-white fine crystalline powder. The molecular formula for oxycodone hydrochloride is C18H21NO4 ∙ HCl and the molecular weight is 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula. C18H21NO4 ·HCl MW 351.82. Oxycodone and Acetaminophen Tablets contain acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, free flowing granules. The molecular formula for acetaminophen is C8H9NO2 and the molecular weight is 151.16. It may be represented by the following structural formula. C8H9NO2 MW 151.16.</Description>
</NDC>
<NDC>
<NDCCode>46708-492-08</NDCCode>
<PackageDescription>80 BLISTER PACK in 1 CARTON (46708-492-08) / 8 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0492-08</NDC11Code>
<ProductNDC>46708-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213223</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tizanidine hydrochloride is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine hydrochloride capsules should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration (2.1)].</IndicationAndUsage>
<Description>Tizanidine hydrochloride is a central alpha2-adrenergic agonist. Tizanidine hydrochloride is almost white to slightly yellow crystalline substance. Tizanidine is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine’s molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules are supplied as 2, 4, and 6 mg capsules for oral administration. Tizanidine hydrochloride capsules contain the active ingredient, tizanidine hydrochloride (2.29 mg equivalent to 2 mg tizanidine base, 4.58 mg equivalent to 4 mg tizanidine base, and 6.87 mg equivalent to 6 mg tizanidine base), and the inactive ingredients, sugar spheres (composed of sucrose, corn starch and purified water), hypromellose, colloidal silicon dioxide, methacrylic acid and ethyl acrylate copolymer, triethyl citrate and talc. Each empty hard gelatin capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate and FD&C Blue No. 1. Additionally, 4 mg and 6 mg empty hard gelatin capsule shell contains FD&C Red No. 3. The printing ink contains shellac, potassium hydroxide and iron oxide black.</Description>
</NDC>
<NDC>
<NDCCode>46708-492-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (46708-492-30) </PackageDescription>
<NDC11Code>46708-0492-30</NDC11Code>
<ProductNDC>46708-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213223</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tizanidine hydrochloride is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine hydrochloride capsules should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration (2.1)].</IndicationAndUsage>
<Description>Tizanidine hydrochloride is a central alpha2-adrenergic agonist. Tizanidine hydrochloride is almost white to slightly yellow crystalline substance. Tizanidine is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine’s molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules are supplied as 2, 4, and 6 mg capsules for oral administration. Tizanidine hydrochloride capsules contain the active ingredient, tizanidine hydrochloride (2.29 mg equivalent to 2 mg tizanidine base, 4.58 mg equivalent to 4 mg tizanidine base, and 6.87 mg equivalent to 6 mg tizanidine base), and the inactive ingredients, sugar spheres (composed of sucrose, corn starch and purified water), hypromellose, colloidal silicon dioxide, methacrylic acid and ethyl acrylate copolymer, triethyl citrate and talc. Each empty hard gelatin capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate and FD&C Blue No. 1. Additionally, 4 mg and 6 mg empty hard gelatin capsule shell contains FD&C Red No. 3. The printing ink contains shellac, potassium hydroxide and iron oxide black.</Description>
</NDC>
<NDC>
<NDCCode>46708-492-41</NDCCode>
<PackageDescription>150 CAPSULE in 1 BOTTLE (46708-492-41) </PackageDescription>
<NDC11Code>46708-0492-41</NDC11Code>
<ProductNDC>46708-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213223</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tizanidine hydrochloride is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine hydrochloride capsules should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration (2.1)].</IndicationAndUsage>
<Description>Tizanidine hydrochloride is a central alpha2-adrenergic agonist. Tizanidine hydrochloride is almost white to slightly yellow crystalline substance. Tizanidine is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine’s molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules are supplied as 2, 4, and 6 mg capsules for oral administration. Tizanidine hydrochloride capsules contain the active ingredient, tizanidine hydrochloride (2.29 mg equivalent to 2 mg tizanidine base, 4.58 mg equivalent to 4 mg tizanidine base, and 6.87 mg equivalent to 6 mg tizanidine base), and the inactive ingredients, sugar spheres (composed of sucrose, corn starch and purified water), hypromellose, colloidal silicon dioxide, methacrylic acid and ethyl acrylate copolymer, triethyl citrate and talc. Each empty hard gelatin capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate and FD&C Blue No. 1. Additionally, 4 mg and 6 mg empty hard gelatin capsule shell contains FD&C Red No. 3. The printing ink contains shellac, potassium hydroxide and iron oxide black.</Description>
</NDC>
<NDC>
<NDCCode>46708-492-91</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (46708-492-91) </PackageDescription>
<NDC11Code>46708-0492-91</NDC11Code>
<ProductNDC>46708-492</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tizanidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213223</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>TIZANIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tizanidine hydrochloride is a central alpha-2-adrenergic agonist indicated for the management of spasticity. Because of the short duration of therapeutic effect, treatment with tizanidine hydrochloride capsules should be reserved for those daily activities and times when relief of spasticity is most important [see Dosage and Administration (2.1)].</IndicationAndUsage>
<Description>Tizanidine hydrochloride is a central alpha2-adrenergic agonist. Tizanidine hydrochloride is almost white to slightly yellow crystalline substance. Tizanidine is slightly soluble in water and methanol. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. Tizanidine’s molecular formula is C9H8ClN5S-HCl, its molecular weight is 290.2 and its structural formula is:. Tizanidine hydrochloride capsules are supplied as 2, 4, and 6 mg capsules for oral administration. Tizanidine hydrochloride capsules contain the active ingredient, tizanidine hydrochloride (2.29 mg equivalent to 2 mg tizanidine base, 4.58 mg equivalent to 4 mg tizanidine base, and 6.87 mg equivalent to 6 mg tizanidine base), and the inactive ingredients, sugar spheres (composed of sucrose, corn starch and purified water), hypromellose, colloidal silicon dioxide, methacrylic acid and ethyl acrylate copolymer, triethyl citrate and talc. Each empty hard gelatin capsule shell contains gelatin, titanium dioxide, sodium lauryl sulfate and FD&C Blue No. 1. Additionally, 4 mg and 6 mg empty hard gelatin capsule shell contains FD&C Red No. 3. The printing ink contains shellac, potassium hydroxide and iron oxide black.</Description>
</NDC>
</NDCList>