RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>49288-0572-4</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0572-4)</PackageDescription>
    <NDC11Code>49288-0572-04</NDC11Code>
    <ProductNDC>49288-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Thyme</ProprietaryName>
    <NonProprietaryName>Thyme</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>GARDEN THYME</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dietary Proteins [CS],Food Additives [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0572-1</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0572-1)</PackageDescription>
    <NDC11Code>49288-0572-01</NDC11Code>
    <ProductNDC>49288-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Thyme</ProprietaryName>
    <NonProprietaryName>Thyme</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>GARDEN THYME</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dietary Proteins [CS],Food Additives [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0572-2</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0572-2)</PackageDescription>
    <NDC11Code>49288-0572-02</NDC11Code>
    <ProductNDC>49288-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Thyme</ProprietaryName>
    <NonProprietaryName>Thyme</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>GARDEN THYME</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dietary Proteins [CS],Food Additives [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0572-3</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0572-3)</PackageDescription>
    <NDC11Code>49288-0572-03</NDC11Code>
    <ProductNDC>49288-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Thyme</ProprietaryName>
    <NonProprietaryName>Thyme</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>GARDEN THYME</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dietary Proteins [CS],Food Additives [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0572-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0572-5)</PackageDescription>
    <NDC11Code>49288-0572-05</NDC11Code>
    <ProductNDC>49288-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Thyme</ProprietaryName>
    <NonProprietaryName>Thyme</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>GARDEN THYME</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Dietary Proteins [CS],Food Additives [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>0135-0572-02</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0135-0572-02)  / 96.4 g in 1 TUBE</PackageDescription>
    <NDC11Code>00135-0572-02</NDC11Code>
    <ProductNDC>0135-0572</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Sensodyne Complete Protection</ProprietaryName>
    <ProprietaryNameSuffix>Extra Fresh</ProprietaryNameSuffix>
    <NonProprietaryName>Stannous Fluoride</NonProprietaryName>
    <DosageFormName>PASTE</DosageFormName>
    <RouteName>DENTAL</RouteName>
    <StartMarketingDate>20140714</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M022</ApplicationNumber>
    <LabelerName>Haleon US Holdings LLC</LabelerName>
    <SubstanceName>STANNOUS FLUORIDE</SubstanceName>
    <StrengthNumber>1.1</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140714</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>aids in the prevention of dental cavities. helps prevent gingivitis, an early form of gum disease. helps interfere with harmful effects of plaque associated with gingivitis. builds increasing protection against painful sensitivity of the teeth to cold, heat, acids, sweets, or contact.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>15631-0572-1</NDCCode>
    <PackageDescription>4 TABLET in 1 BLISTER PACK (15631-0572-1)</PackageDescription>
    <NDC11Code>15631-0572-01</NDC11Code>
    <ProductNDC>15631-0572</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Cuprum Metallicum</ProprietaryName>
    <NonProprietaryName>Cuprum Metallicum</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151227</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
    <SubstanceName>COPPER</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>[hp_X]/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>15631-0572-4</NDCCode>
    <PackageDescription>250 TABLET in 1 CONTAINER (15631-0572-4)</PackageDescription>
    <NDC11Code>15631-0572-04</NDC11Code>
    <ProductNDC>15631-0572</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Cuprum Metallicum</ProprietaryName>
    <NonProprietaryName>Cuprum Metallicum</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151227</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
    <SubstanceName>COPPER</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>[hp_X]/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>37662-0572-4</NDCCode>
    <PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (37662-0572-4) </PackageDescription>
    <NDC11Code>37662-0572-04</NDC11Code>
    <ProductNDC>37662-0572</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Cryptomeria Japonica</ProprietaryName>
    <NonProprietaryName>Cryptomeria Japonica</NonProprietaryName>
    <DosageFormName>PELLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220721</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Hahnemann Laboratories, INC.</LabelerName>
    <SubstanceName>CRYPTOMERIA JAPONICA WHOLE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[hp_C]/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2022-07-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220721</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>53002-0572-4</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (53002-0572-4) </PackageDescription>
    <NDC11Code>53002-0572-04</NDC11Code>
    <ProductNDC>53002-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ondansetron Hydrochloride</ProprietaryName>
    <NonProprietaryName>Ondansetron Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20070731</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078539</ApplicationNumber>
    <LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
    <Description>The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6.</Description>
  </NDC>
  <NDC>
    <NDCCode>65692-0572-1</NDCCode>
    <PackageDescription>4.25 g in 1 TUBE (65692-0572-1) </PackageDescription>
    <NDC11Code>65692-0572-01</NDC11Code>
    <ProductNDC>65692-0572</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Broad Spectrum Spf 15 Sunscreen Tropical Smoothie Lip Balm</ProprietaryName>
    <NonProprietaryName>Broad Spectrum Spf 15 Sunscreen Tropical Smoothie Lip Balm</NonProprietaryName>
    <DosageFormName>STICK</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20221213</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M020</ApplicationNumber>
    <LabelerName>Raining Rose</LabelerName>
    <SubstanceName>AVOBENZONE; OCTINOXATE; OCTOCRYLENE; OCTISALATE</SubstanceName>
    <StrengthNumber>.13; .28; .06; .21</StrengthNumber>
    <StrengthUnit>g/4.25g; g/4.25g; g/4.25g; g/4.25g</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2023-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221213</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Help prevent sunburn.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>0378-0572-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (0378-0572-01) </PackageDescription>
    <NDC11Code>00378-0572-01</NDC11Code>
    <ProductNDC>0378-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuterol</ProprietaryName>
    <NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19910117</StartMarketingDate>
    <EndMarketingDate>20230228</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA072894</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-03-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>19910117</StartMarketingDatePackage>
    <EndMarketingDatePackage>20230228</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>0378-0572-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE, PLASTIC (0378-0572-05) </PackageDescription>
    <NDC11Code>00378-0572-05</NDC11Code>
    <ProductNDC>0378-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuterol</ProprietaryName>
    <NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19910117</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA072894</ApplicationNumber>
    <LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19910117</StartMarketingDatePackage>
    <EndMarketingDatePackage>20200630</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>0555-0572-02</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (0555-0572-02) </PackageDescription>
    <NDC11Code>00555-0572-02</NDC11Code>
    <ProductNDC>0555-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methotrexate</ProprietaryName>
    <NonProprietaryName>Methotrexate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19901101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA081099</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>METHOTREXATE SODIUM</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19901101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Methotrexate tablets are a dihydrofolate reductase inhibitor indicated for the: 1 Treatment of adults and pediatric patients with acute lymphoblastic leukemia (ALL) as part of a combination chemotherapy maintenance regimen (1.1), 2 Treatment of adults with mycosis fungoides (1.1), 3 Treatment of adults with relapsed or refractory non-Hodgkin lymphoma as part of a metronomic combination regimen (1.1), 4 Treatment of adults with rheumatoid arthritis (1.2), 5 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA) (1.3), 6 Treatment of adults with severe psoriasis (1.4).</IndicationAndUsage>
    <Description>Methotrexate, USP is dihydrofolate reductase inhibitor with the chemical name of L-glutamic acid, N-[4-[[(2,4-diamino-6-pteridinyl)methyl]methylamino]benzoyl]. The molecular formula is C20H22N8O5 and the molecular weight is 454.45 g/mol. The structural formula is. Methotrexate tablets, USP for oral use are available in bottles of 36 and 100 tablets. Each tablet contains 2.5 mg methotrexate, USP equivalent to 2.74 mg methotrexate sodium. Inactive Ingredients: Anhydrous lactose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized corn starch, propylene glycol, sodium carbonate monohydrate, and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>0555-0572-35</NDCCode>
    <PackageDescription>36 TABLET in 1 BOTTLE (0555-0572-35) </PackageDescription>
    <NDC11Code>00555-0572-35</NDC11Code>
    <ProductNDC>0555-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methotrexate</ProprietaryName>
    <NonProprietaryName>Methotrexate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19901101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA081099</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>METHOTREXATE SODIUM</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19901101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Methotrexate tablets are a dihydrofolate reductase inhibitor indicated for the: 1 Treatment of adults and pediatric patients with acute lymphoblastic leukemia (ALL) as part of a combination chemotherapy maintenance regimen (1.1), 2 Treatment of adults with mycosis fungoides (1.1), 3 Treatment of adults with relapsed or refractory non-Hodgkin lymphoma as part of a metronomic combination regimen (1.1), 4 Treatment of adults with rheumatoid arthritis (1.2), 5 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA) (1.3), 6 Treatment of adults with severe psoriasis (1.4).</IndicationAndUsage>
    <Description>Methotrexate, USP is dihydrofolate reductase inhibitor with the chemical name of L-glutamic acid, N-[4-[[(2,4-diamino-6-pteridinyl)methyl]methylamino]benzoyl]. The molecular formula is C20H22N8O5 and the molecular weight is 454.45 g/mol. The structural formula is. Methotrexate tablets, USP for oral use are available in bottles of 36 and 100 tablets. Each tablet contains 2.5 mg methotrexate, USP equivalent to 2.74 mg methotrexate sodium. Inactive Ingredients: Anhydrous lactose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized corn starch, propylene glycol, sodium carbonate monohydrate, and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>0713-0572-50</NDCCode>
    <PackageDescription>50 CAPSULE in 1 BOTTLE (0713-0572-50) </PackageDescription>
    <NDC11Code>00713-0572-50</NDC11Code>
    <ProductNDC>0713-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline</ProprietaryName>
    <NonProprietaryName>Doxycycline</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150528</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204446</ApplicationNumber>
    <LabelerName>Cosette Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DOXYCYCLINE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules, USP and other antibacterial drugs, doxycycline capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections:    Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae.    Respiratory tract infections caused by Mycoplasma pneumoniae.     Lymphogranuloma venereum caused by Chlamydia trachomatis.    Psittacosis (ornithosis) caused by Chlamydophila psittaci.    Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence.    Inclusion conjunctivitis caused by Chlamydia trachomatis.    Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis.    Nongonococcal urethritis caused by Ureaplasma urealyticum.    Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms:    Chancroid caused by Haemophilus ducreyi.    Plague due to Yersinia pestis.    Tularemia due to Francisella tularensis.    Cholera caused by Vibrio cholerae.     Campylobacter fetus infections caused by Campylobacter fetus.    Brucellosis due to Brucella species (in conjunction with streptomycin).    Bartonellosis due to Bartonella bacilliformis.    Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug:    Escherichia coli    Enterobacter aerogenes    Shigella species    Acinetobacter species    Respiratory tract infections caused by Haemophilus influenzae.    Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug:    Upper respiratory infections caused by Streptococcus pneumoniae.    Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections:    Uncomplicated gonorrhea caused by Neisseria gonorrhoeae.    Syphilis caused by Treponema pallidum.    Yaws caused by Treponema pallidum subspecies pertenue.    Listeriosis due to Listeria monocytogenes.    Vincent’s infection caused by Fusobacterium fusiforme.    Actinomycosis caused by Actinomyces israelii.    Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
    <Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules USP, 50 mg, 75 mg, and 100 mg contain doxycycline monohydrate equivalent to 50 mg, 75 mg, and 100 mg of doxycycline for oral administration. The chemical designation of the light yellow to pale yellow powder is 2-Naphthacenecarboxamide, 4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-,[4S-(4α,4aα,5a,5aα,6a,12aα)]-, monohydrate. Structural formula. C22H24N2O8  H2O                                                                                                        M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains FD &amp; C Red # 3, D&amp;C Yellow # 10, titanium dioxide, gelatin, sodium lauryl sulfate for the 50 mg strength; iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide, gelatin, sodium lauryl sulfate for the 75 mg strength and iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide, FD &amp; C Red # 3, D&amp;C Yellow # 10, gelatin, sodium lauryl sulfate for the 100 mg strength. The capsules are printed with edible ink containing shellac, titanium dioxide, black iron oxide, brown iron oxide and potassium hydroxide for 50 mg, 75 mg and 100 mg strengths.</Description>
  </NDC>
  <NDC>
    <NDCCode>0713-0572-93</NDCCode>
    <PackageDescription>250 CAPSULE in 1 BOTTLE (0713-0572-93) </PackageDescription>
    <NDC11Code>00713-0572-93</NDC11Code>
    <ProductNDC>0713-0572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline</ProprietaryName>
    <NonProprietaryName>Doxycycline</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150528</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204446</ApplicationNumber>
    <LabelerName>Cosette Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>DOXYCYCLINE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules, USP and other antibacterial drugs, doxycycline capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections:    Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae.    Respiratory tract infections caused by Mycoplasma pneumoniae.     Lymphogranuloma venereum caused by Chlamydia trachomatis.    Psittacosis (ornithosis) caused by Chlamydophila psittaci.    Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence.    Inclusion conjunctivitis caused by Chlamydia trachomatis.    Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis.    Nongonococcal urethritis caused by Ureaplasma urealyticum.    Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms:    Chancroid caused by Haemophilus ducreyi.    Plague due to Yersinia pestis.    Tularemia due to Francisella tularensis.    Cholera caused by Vibrio cholerae.     Campylobacter fetus infections caused by Campylobacter fetus.    Brucellosis due to Brucella species (in conjunction with streptomycin).    Bartonellosis due to Bartonella bacilliformis.    Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug:    Escherichia coli    Enterobacter aerogenes    Shigella species    Acinetobacter species    Respiratory tract infections caused by Haemophilus influenzae.    Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug:    Upper respiratory infections caused by Streptococcus pneumoniae.    Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections:    Uncomplicated gonorrhea caused by Neisseria gonorrhoeae.    Syphilis caused by Treponema pallidum.    Yaws caused by Treponema pallidum subspecies pertenue.    Listeriosis due to Listeria monocytogenes.    Vincent’s infection caused by Fusobacterium fusiforme.    Actinomycosis caused by Actinomyces israelii.    Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
    <Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules USP, 50 mg, 75 mg, and 100 mg contain doxycycline monohydrate equivalent to 50 mg, 75 mg, and 100 mg of doxycycline for oral administration. The chemical designation of the light yellow to pale yellow powder is 2-Naphthacenecarboxamide, 4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-,[4S-(4α,4aα,5a,5aα,6a,12aα)]-, monohydrate. Structural formula. C22H24N2O8  H2O                                                                                                        M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains FD &amp; C Red # 3, D&amp;C Yellow # 10, titanium dioxide, gelatin, sodium lauryl sulfate for the 50 mg strength; iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide, gelatin, sodium lauryl sulfate for the 75 mg strength and iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide, FD &amp; C Red # 3, D&amp;C Yellow # 10, gelatin, sodium lauryl sulfate for the 100 mg strength. The capsules are printed with edible ink containing shellac, titanium dioxide, black iron oxide, brown iron oxide and potassium hydroxide for 50 mg, 75 mg and 100 mg strengths.</Description>
  </NDC>
  <NDC>
    <NDCCode>10356-572-05</NDCCode>
    <PackageDescription>50 mL in 1 BOTTLE, PUMP (10356-572-05) </PackageDescription>
    <NDC11Code>10356-0572-05</NDC11Code>
    <ProductNDC>10356-572</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Nivea Men Energy Revitalizing</ProprietaryName>
    <NonProprietaryName>Avobenzone, Octisalate, Octocrylene</NonProprietaryName>
    <DosageFormName>LOTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20151201</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>Beiersdorf Inc</LabelerName>
    <SubstanceName>AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
    <StrengthNumber>3; 4.7; 8.4</StrengthNumber>
    <StrengthUnit>g/100mL; g/100mL; g/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>16714-572-01</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (16714-572-01)  *  1 VIAL, MULTI-DOSE in 1 CARTON (16714-540-01)  / 2.8 mL in 1 VIAL, MULTI-DOSE *  28 PACKET in 1 CARTON / 1 mL in 1 PACKET</PackageDescription>
    <NDC11Code>16714-0572-01</NDC11Code>
    <ProductNDC>16714-572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Leuprolide Acetate</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20220801</StartMarketingDate>
    <EndMarketingDate>20240930</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078885</ApplicationNumber>
    <LabelerName>NorthStar RxLLC</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2024-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20220801</StartMarketingDatePackage>
    <EndMarketingDatePackage>20240930</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Leuprolide acetate injection is indicated in the palliative treatment of advanced prostatic cancer.</IndicationAndUsage>
    <Description>Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone (GnRH or LH-RH). The analog possesses greater potency than the natural hormone. The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. Leuprolide acetate injection is a sterile, aqueous solution intended for subcutaneous injection. It is available in a 2.8 mL multiple-dose vial containing leuprolide acetate, USP (5 mg/mL), sodium chloride, USP (6.3 mg/mL) for tonicity adjustment, benzyl alcohol, NF as a preservative (9 mg/mL), and water for injection, USP. The pH may have been adjusted with sodium hydroxide, NF and/or glacial acetic acid, USP. The pH range is 4.5 to 6.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>21695-572-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (21695-572-30)</PackageDescription>
    <NDC11Code>21695-0572-30</NDC11Code>
    <ProductNDC>21695-572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prochlorperazine Maleate</ProprietaryName>
    <NonProprietaryName>Prochlorperazine Maleate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19980301</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040268</ApplicationNumber>
    <LabelerName>Rebel Distributors Corp</LabelerName>
    <SubstanceName>PROCHLORPERAZINE MALEATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Phenothiazine [EPC],Phenothiazines [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>For control of severe nausea and vomiting. For the treatment of schizophrenia.Prochlorperazine is effective for the short-term treatment of generalized non-psychotic anxiety. However, prochlorperazine is not the first drug to be used in therapy for most patients with non-psychotic anxiety, because certain risks associated with its use are not shared by common alternative treatments (e.g., benzodiazepines).When used in the treatment of non-psychotic anxiety, prochlorperazine should not be administered at doses of more than 20 mg per day or for longer than 12 weeks, because the use of prochlorperazine at higher doses or for longer intervals may cause persistent tardive dyskinesia that may prove irreversible (see WARNINGS).The effectiveness of prochlorperazine as treatment for non-psychotic anxiety was established in 4-week clinical studies of outpatients with generalized anxiety disorder. This evidence does not predict that prochlorperazine will be useful in patients with other non-psychotic conditions in which anxiety, or signs that mimic anxiety, are found (e.g., physical illness, organic mental conditions, agitated depression, character pathologies, etc.).Prochlorperazine has not been shown effective in the management of behavioral complications in patients with mental retardation.</IndicationAndUsage>
    <Description>Prochlorperazine is a phenothiazine derivative, present in prochlorperazine tablets as the maleate. Prochlorperazine maleate is designated chemically as 2-chloro-10-[3-(4- methyl-1 -piperazinyl)propyl] phenothiazine maleate [molecular weight 606.10] and has the following structure. Prochlorperazine Maleate is classified as an anti-emetic and antipsychotic agent. Prochlorperazine maleate is white or pale yellow, practically odorless crystalline powder. It is practically insoluble in water and in alcohol; slightly soluble in warm chloroform.Each tablet, for oral administration contains prochlorperazine maleate equivalent to 5 mg or 10 mg of prochlorperazine. In addition, each tablet contains the following inactive ingredients: D&amp;C yellow no. 10 aluminum lake, FD&amp;C blue no. 2 aluminum lake, FD&amp;C yellow no. 6 aluminum lake, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, stearic acid and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>33342-572-09</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (33342-572-09) </PackageDescription>
    <NDC11Code>33342-0572-09</NDC11Code>
    <ProductNDC>33342-572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20241016</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213728</ApplicationNumber>
    <LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>97; 103</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241016</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and sacubitril and valsartan tablets are indicated:  to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1)  for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and Valsartan reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
    <Description>Sacubitril and valsartan tablets is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contains a complex comprised of anionic forms of Sacubitril, Valsartan and sodium cations in the ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate) (N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8.Na3. Its molecular mass is 913 g/mol  and its schematic structural formula is. Sacubitril and valsartan tablets  are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, colloidal silicon dioxide, magnesium stearate, crospovidone. The film-coat inactive ingredients are polyvinyl alcohol-part hydrolised, titanium dioxide, Macrogol 4000, talc. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red.</Description>
  </NDC>
  <NDC>
    <NDCCode>33342-572-57</NDCCode>
    <PackageDescription>180 TABLET in 1 BOTTLE (33342-572-57) </PackageDescription>
    <NDC11Code>33342-0572-57</NDC11Code>
    <ProductNDC>33342-572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20241016</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213728</ApplicationNumber>
    <LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>97; 103</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241016</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and sacubitril and valsartan tablets are indicated:  to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1)  for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and Valsartan reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
    <Description>Sacubitril and valsartan tablets is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contains a complex comprised of anionic forms of Sacubitril, Valsartan and sodium cations in the ratio of 1:1:3, respectively. Following oral administration, the complex dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The complex is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1´-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4oxobutanoate) (N-pentanoyl-N-{[2´-(1H-tetrazol-1-id-5-yl)[1,1´-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8.Na3. Its molecular mass is 913 g/mol  and its schematic structural formula is. Sacubitril and valsartan tablets  are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, colloidal silicon dioxide, magnesium stearate, crospovidone. The film-coat inactive ingredients are polyvinyl alcohol-part hydrolised, titanium dioxide, Macrogol 4000, talc. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet contains iron oxide yellow and iron oxide red.</Description>
  </NDC>
  <NDC>
    <NDCCode>42549-572-28</NDCCode>
    <PackageDescription>28 TABLET, EXTENDED RELEASE in 1 BOTTLE (42549-572-28)</PackageDescription>
    <NDC11Code>42549-0572-28</NDC11Code>
    <ProductNDC>42549-572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20101021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076412</ApplicationNumber>
    <LabelerName>STAT Rx USA LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2018-02-07</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Morphine sulfate extended-release tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. The morphine sulfate extended-release tablets 100 mg and 200 mg strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (See American Pain Society guidelines.).</IndicationAndUsage>
    <Description>Morphine Sulfate Extended-Release Tablets are supplied in tablet form for oral administration.Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate USP).All strengths contain the following inactive ingredients: hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, silicone dioxide, titanium dioxide, and triacetine. The 15 mg tablets also contain: polyethylene glycol, polydextrose, and FD&amp;C Blue No. 2. The 30 mg tablets also contain: polyethylene glycol, polydextrose, FD&amp;C Blue No. 2, and D&amp;C Red No. 7. The 60 mg tablets also contain: polyethylene glycol, polydextrose, FD&amp;C Yellow No. 6, and iron oxide red. The 100 mg* tablets also contain: iron oxide black. The 200 mg* tablets also contain: polyethylene glycol, FD&amp;C Blue No. 1, and D&amp;C Yellow No. 10 Lake.*100 mg and 200 mg ARE FOR USE IN OPIOID-TOLERANT PATIENTS ONLY.</Description>
  </NDC>
  <NDC>
    <NDCCode>42549-572-56</NDCCode>
    <PackageDescription>56 TABLET, EXTENDED RELEASE in 1 BOTTLE (42549-572-56)</PackageDescription>
    <NDC11Code>42549-0572-56</NDC11Code>
    <ProductNDC>42549-572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20101021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076412</ApplicationNumber>
    <LabelerName>STAT Rx USA LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2018-02-07</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Morphine sulfate extended-release tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. The morphine sulfate extended-release tablets 100 mg and 200 mg strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (See American Pain Society guidelines.).</IndicationAndUsage>
    <Description>Morphine Sulfate Extended-Release Tablets are supplied in tablet form for oral administration.Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate USP).All strengths contain the following inactive ingredients: hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, silicone dioxide, titanium dioxide, and triacetine. The 15 mg tablets also contain: polyethylene glycol, polydextrose, and FD&amp;C Blue No. 2. The 30 mg tablets also contain: polyethylene glycol, polydextrose, FD&amp;C Blue No. 2, and D&amp;C Red No. 7. The 60 mg tablets also contain: polyethylene glycol, polydextrose, FD&amp;C Yellow No. 6, and iron oxide red. The 100 mg* tablets also contain: iron oxide black. The 200 mg* tablets also contain: polyethylene glycol, FD&amp;C Blue No. 1, and D&amp;C Yellow No. 10 Lake.*100 mg and 200 mg ARE FOR USE IN OPIOID-TOLERANT PATIENTS ONLY.</Description>
  </NDC>
  <NDC>
    <NDCCode>42549-572-60</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (42549-572-60)</PackageDescription>
    <NDC11Code>42549-0572-60</NDC11Code>
    <ProductNDC>42549-572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20101021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076412</ApplicationNumber>
    <LabelerName>STAT Rx USA LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2018-02-07</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Morphine sulfate extended-release tablets are an extended-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. The morphine sulfate extended-release tablets 100 mg and 200 mg strengths are high dose, extended-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate. (See American Pain Society guidelines.).</IndicationAndUsage>
    <Description>Morphine Sulfate Extended-Release Tablets are supplied in tablet form for oral administration.Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15, 30, 60, 100 and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate USP).All strengths contain the following inactive ingredients: hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, silicone dioxide, titanium dioxide, and triacetine. The 15 mg tablets also contain: polyethylene glycol, polydextrose, and FD&amp;C Blue No. 2. The 30 mg tablets also contain: polyethylene glycol, polydextrose, FD&amp;C Blue No. 2, and D&amp;C Red No. 7. The 60 mg tablets also contain: polyethylene glycol, polydextrose, FD&amp;C Yellow No. 6, and iron oxide red. The 100 mg* tablets also contain: iron oxide black. The 200 mg* tablets also contain: polyethylene glycol, FD&amp;C Blue No. 1, and D&amp;C Yellow No. 10 Lake.*100 mg and 200 mg ARE FOR USE IN OPIOID-TOLERANT PATIENTS ONLY.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-572-01</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (42806-572-01) </PackageDescription>
    <NDC11Code>42806-0572-01</NDC11Code>
    <ProductNDC>42806-572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxazepam</ProprietaryName>
    <NonProprietaryName>Oxazepam</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19880419</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA071756</ApplicationNumber>
    <LabelerName>Epic Pharma, LLC</LabelerName>
    <SubstanceName>OXAZEPAM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-10-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19880419</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxazepam capsules are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Anxiety associated with depression is also responsive to oxazepam therapy. This product has been found particularly useful in the management of anxiety, tension, agitation and irritability in older patients. Alcoholics with acute tremulousness, inebriation, or with anxiety associated with alcohol withdrawal are responsive to therapy. The effectiveness of oxazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
    <Description>Oxazepam, USP is the first of a chemical series of compounds known as the 3-hydroxybenzodiazepinones. A therapeutic agent providing versatility and flexibility in control of common emotional disturbances, this product exerts prompt action in a wide variety of disorders associated with anxiety, tension, agitation, and irritability, and anxiety associated with depression. In tolerance and toxicity studies on several animal species, this product reveals significantly greater safety factors than related compounds (chlordiazepoxide and diazepam) and manifests a wide separation of effective doses and doses inducing side effects. Oxazepam capsules, USP contain 10 mg, 15 mg or 30 mg oxazepam, USP. The following inactive ingredients are contained in these capsules: Inactive ingredients: hypromellose, lactose (monohydrate), magnesium stearate and corn starch. The capsule shells and imprinting inks contain: gelatin, titanium dioxide, shellac, black iron oxide, propylene glycol and D&amp;C Red #7 Calcium Lake E180. The 10 mg capsules also contain: methylparaben, butylparaben, propylparaben, benzyl alcohol, sodium propionate, edetate calcium disodium and sodium lauryl sulfate. The 15 mg ink also contains: D&amp;C Yellow #10 Aluminum Lake. The 30 mg ink also contains: FD&amp;C Red #40 Aluminum Lake #129 and FD&amp;C Blue #2 Aluminum Lake #132. Oxazepam is a white crystalline powder. Oxazepam, USP is 7 chloro-1,3-dihydro-3-hydroxy-5-phenyl-2H-1,4-benzodiazepin-2-one and has the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>43063-572-04</NDCCode>
    <PackageDescription>4 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43063-572-04)</PackageDescription>
    <NDC11Code>43063-0572-04</NDC11Code>
    <ProductNDC>43063-572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Azithromycin</ProprietaryName>
    <NonProprietaryName>Azithromycin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20051116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065153</ApplicationNumber>
    <LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>AZITHROMYCIN MONOHYDRATE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2017-10-26</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>43598-572-11</NDCCode>
    <PackageDescription>50 mL in 1 BOTTLE (43598-572-11) </PackageDescription>
    <NDC11Code>43598-0572-11</NDC11Code>
    <ProductNDC>43598-572</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Famotidine</ProprietaryName>
    <NonProprietaryName>Famotidine</NonProprietaryName>
    <DosageFormName>FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240315</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217605</ApplicationNumber>
    <LabelerName>DR. REDDY'S LABORATORIES INC</LabelerName>
    <SubstanceName>FAMOTIDINE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-03-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240315</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Famotidine for oral suspension is indicated in adults for the treatment of: : 1 active duodenal ulcer (DU). , 2 active gastric ulcer (GU). , 3 symptomatic nonerosive gastroesophageal reflux disease (GERD). , 4 erosive esophagitis due to GERD, diagnosed by biopsy. , 5 treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome, multiple endocrine neoplasias). , 6 reduction of the risk of duodenal ulcer recurrence. .</IndicationAndUsage>
    <Description>The active ingredient in famotidine for oral suspension is a histamine-2 (H2) receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4- thiazolyl]methyl]thio]propanimidamide. The molecular formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.43. Its structural formula is:. Each 5 mL of famotidine for oral suspension when prepared as directed contains 40 mg of famotidine and the following inactive ingredients: anhydrous citric acid, corn starch, flavors (cherry and mint), maltodextrin, sucrose, and xanthan gum. Added as preservatives are methylparaben sodium, propylparaben sodium and sodium benzoate. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.</Description>
  </NDC>
  <NDC>
    <NDCCode>45802-572-53</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (45802-572-53)  &gt; 4 SUPPOSITORY in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>45802-0572-53</NDC11Code>
    <ProductNDC>45802-572</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Bisacodyl</ProprietaryName>
    <ProprietaryNameSuffix>Stimulant Laxative</ProprietaryNameSuffix>
    <NonProprietaryName>Bisacodyl</NonProprietaryName>
    <DosageFormName>SUPPOSITORY</DosageFormName>
    <RouteName>RECTAL</RouteName>
    <StartMarketingDate>20120927</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part334</ApplicationNumber>
    <LabelerName>Perrigo New York Inc</LabelerName>
    <SubstanceName>BISACODYL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2017-11-08</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>49348-572-08</NDCCode>
    <PackageDescription>50 BLISTER PACK in 1 CARTON (49348-572-08)  / 1 GUM, CHEWING in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>49348-0572-08</NDC11Code>
    <ProductNDC>49348-572</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Sunmark Nicotine</ProprietaryName>
    <NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
    <DosageFormName>GUM, CHEWING</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050618</StartMarketingDate>
    <EndMarketingDate>20260201</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076789</ApplicationNumber>
    <LabelerName>Strategic Sourcing Services LLC</LabelerName>
    <SubstanceName>NICOTINE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20050618</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260201</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
  </NDC>
</NDCList>