{
"NDC": [
{
"NDCCode": "49288-0589-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0589-3)",
"NDC11Code": "49288-0589-03",
"ProductNDC": "49288-0589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Washington/oregon Inland Tree Mixture",
"NonProprietaryName": "Washington/oregon Inland Tree Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19960712",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "POPULUS TREMULOIDES POLLEN; POPULUS BALSAMIFERA SUBSP. TRICHOCARPA POLLEN; ACER NEGUNDO POLLEN; PINUS CONTORTA POLLEN; FRAXINUS LATIFOLIA POLLEN; ALNUS RHOMBIFOLIA POLLEN; BETULA OCCIDENTALIS POLLEN; PINUS PONDEROSA POLLEN; SALIX LUCIDA SSP. LASIANDRA POLLEN",
"StrengthNumber": ".0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "37662-0589-3",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (37662-0589-3) ",
"NDC11Code": "37662-0589-03",
"ProductNDC": "37662-0589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cuprum Aceticum",
"NonProprietaryName": "Cuprum Aceticum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220615",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "CUPRIC ACETATE",
"StrengthNumber": "100",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220615",
"SamplePackage": "N"
},
{
"NDCCode": "60505-0589-3",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (60505-0589-3) / 15 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "60505-0589-03",
"ProductNDC": "60505-0589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brimonidine Tartrate/timolol Maleate Ophthalmic Solution",
"NonProprietaryName": "Brimonidine Tartrate And Timolol Maleate",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20221019",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091442",
"LabelerName": "Apotex Corp.",
"SubstanceName": "BRIMONIDINE TARTRATE; TIMOLOL MALEATE",
"StrengthNumber": "2; 5",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Antagonists [MoA], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221019",
"SamplePackage": "N",
"IndicationAndUsage": "Brimonidine Tartrate/Timolol Maleate Ophthalmic Solution is indicated for the reduction of elevated intraocular pressure (IOP) in patients with glaucoma or ocular hypertension who require adjunctive or replacement therapy due to inadequately controlled IOP. The IOP-lowering of brimonidine tartrate/timolol maleate ophthalmic solution dosed twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol maleate ophthalmic solution dosed twice a day and 0.2% brimonidine tartrate ophthalmic solution dosed three times per day.",
"Description": "Brimonidine Tartrate/Timolol Maleate Ophthalmic Solution 0.2%/0.5%, sterile, contains brimonidine tartrate, a relatively selective alpha-2 adrenergic receptor agonist, and timolol maleate, a non-selective beta-adrenergic receptor inhibitor (topical intraocular pressure lowering agent) for topical ophthalmic use. The structural formulae are. Brimonidine tartrate. 5-Bromo-6-(-2-imidazolin-2-ylamino) quinoxaline D-tartrate (1:1); Molecular Weight is 442.22. Timolol maleate. (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)-oxy]-2-propanol maleate (1:1) (salt); Molecular Weight is 432.5 as the maleate salt. In solution, Brimonidine Tartrate/Timolol Maleate Ophthalmic Solution has a clear, greenish-yellow color. It has an osmolality of 260 to 330 mOsmol/kg and a pH during its shelf life of 6.5 to 7.3. Brimonidine tartrate appears as a white to slightly yellowish powder and is soluble in both water (1.5 mg/mL) and in the product vehicle (3 mg/mL) at pH 7.2. Timolol maleate appears as a white or practically white, odorless, crystalline powder and is soluble in water, methanol, and alcohol. Each mL of Brimonidine Tartrate/Timolol Maleate Ophthalmic Solution contains the active ingredients brimonidine tartrate 0.2% and timolol 0.5% (6.8 mg/mL timolol maleate) with the inactive ingredients benzalkonium chloride 0.005%; sodium phosphate dibasic heptahydrate, sodium phosphate monobasic monohydrate; water for injection; and hydrochloric acid and/or sodium hydroxide to adjust pH."
},
{
"NDCCode": "67296-0589-3",
"PackageDescription": "20 TABLET in 1 BOTTLE (67296-0589-3) ",
"NDC11Code": "67296-0589-03",
"ProductNDC": "67296-0589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180101",
"EndMarketingDate": "20221130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040656",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "ACETAMINOPHEN; HYDROCODONE BITARTRATE",
"StrengthNumber": "325; 7.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2022-12-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180101",
"EndMarketingDatePackage": "20221130",
"SamplePackage": "N"
},
{
"NDCCode": "80425-0589-3",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (80425-0589-3) ",
"NDC11Code": "80425-0589-03",
"ProductNDC": "80425-0589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20260710",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217400",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260710",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: active duodenal ulcer (DU). active gastric ulcer (GU). symptomatic nonerosive gastroesophageal reflux disease (GERD). erosive esophagitis due to GERD, diagnosed by biopsy. Famotidine tablets are indicated in adults for the: treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome, multiple endocrine neoplasias). reduction of the risk of duodenal ulcer recurrence.",
"Description": "The active ingredient in famotidine tablets USP is a histamine-2 (H 2) receptor antagonist. Famotidine is 3-[[2-(Diaminomethyleneamino)thiazol-4-yl]methylthio] -N'–Sulfamoylpropanimidamide. The molecular formula of famotidine is C 8H 15N 7O 2S 3and its molecular weight is 337.45. Its structural formula is:. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine USP and the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate and titanium dioxide. In addition the 20 mg tablets contain iron oxide yellow. Famotidine USP is a White to yellowish-white, crystalline powder or crystals that is freely soluble in glacial acetic acid and dimethyl formamide, very slightly soluble in methanol, practically insoluble in ethanol and ethyl acetate. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "49288-0589-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0589-1)",
"NDC11Code": "49288-0589-01",
"ProductNDC": "49288-0589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Washington/oregon Inland Tree Mixture",
"NonProprietaryName": "Washington/oregon Inland Tree Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19960712",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "POPULUS TREMULOIDES POLLEN; POPULUS BALSAMIFERA SUBSP. TRICHOCARPA POLLEN; ACER NEGUNDO POLLEN; PINUS CONTORTA POLLEN; FRAXINUS LATIFOLIA POLLEN; ALNUS RHOMBIFOLIA POLLEN; BETULA OCCIDENTALIS POLLEN; PINUS PONDEROSA POLLEN; SALIX LUCIDA SSP. LASIANDRA POLLEN",
"StrengthNumber": ".0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0589-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0589-2)",
"NDC11Code": "49288-0589-02",
"ProductNDC": "49288-0589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Washington/oregon Inland Tree Mixture",
"NonProprietaryName": "Washington/oregon Inland Tree Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19960712",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "POPULUS TREMULOIDES POLLEN; POPULUS BALSAMIFERA SUBSP. TRICHOCARPA POLLEN; ACER NEGUNDO POLLEN; PINUS CONTORTA POLLEN; FRAXINUS LATIFOLIA POLLEN; ALNUS RHOMBIFOLIA POLLEN; BETULA OCCIDENTALIS POLLEN; PINUS PONDEROSA POLLEN; SALIX LUCIDA SSP. LASIANDRA POLLEN",
"StrengthNumber": ".0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0589-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0589-4)",
"NDC11Code": "49288-0589-04",
"ProductNDC": "49288-0589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Washington/oregon Inland Tree Mixture",
"NonProprietaryName": "Washington/oregon Inland Tree Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19960712",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "POPULUS TREMULOIDES POLLEN; POPULUS BALSAMIFERA SUBSP. TRICHOCARPA POLLEN; ACER NEGUNDO POLLEN; PINUS CONTORTA POLLEN; FRAXINUS LATIFOLIA POLLEN; ALNUS RHOMBIFOLIA POLLEN; BETULA OCCIDENTALIS POLLEN; PINUS PONDEROSA POLLEN; SALIX LUCIDA SSP. LASIANDRA POLLEN",
"StrengthNumber": ".0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0589-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0589-5)",
"NDC11Code": "49288-0589-05",
"ProductNDC": "49288-0589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Washington/oregon Inland Tree Mixture",
"NonProprietaryName": "Washington/oregon Inland Tree Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19960712",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "POPULUS TREMULOIDES POLLEN; POPULUS BALSAMIFERA SUBSP. TRICHOCARPA POLLEN; ACER NEGUNDO POLLEN; PINUS CONTORTA POLLEN; FRAXINUS LATIFOLIA POLLEN; ALNUS RHOMBIFOLIA POLLEN; BETULA OCCIDENTALIS POLLEN; PINUS PONDEROSA POLLEN; SALIX LUCIDA SSP. LASIANDRA POLLEN",
"StrengthNumber": ".0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "10135-589-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (10135-589-01)",
"NDC11Code": "10135-0589-01",
"ProductNDC": "10135-589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pilocarpine Hydrochloride",
"NonProprietaryName": "Pilocarpine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077220",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "PILOCARPINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Agonists [MoA],Cholinergic Muscarinic Agonists [MoA],Cholinergic Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Pilocarpine hydrochloride tablets, USP are indicated for 1) the treatment of symptoms of dry mouth from salivary gland hypofunction caused by radiotherapy for cancer of the head and neck; and 2) the treatment of symptoms of dry mouth in patients with Sjogren’s syndrome.",
"Description": "Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride, USP is a hygroscopic, odorless, bitter tasting white crystal or powder, which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, USP with a chemical name of (3S-cis)-2(3H)-Furanone, 3-ethyldihydro-4-[(1-methyl-1H-imidazol-5-yl) methyl] monohydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet’s film coating is: polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc. Each 7.5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet’s film coating is: FD&C Blue #2/Indigo Carmine aluminum lake, polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc."
},
{
"NDCCode": "12496-0090-1",
"PackageDescription": "1 KIT in 1 CARTON (12496-0090-1) * 1 SYRINGE in 1 POUCH (12496-0090-2) / 1.2 mL in 1 SYRINGE (12496-0090-5) * 1 SYRINGE in 1 POUCH (12496-0589-2) / 1 mL in 1 SYRINGE (12496-0589-5) ",
"NDC11Code": "12496-0090-01",
"ProductNDC": "12496-0090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Perseris",
"NonProprietaryName": "Risperidone",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20181109",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210655",
"LabelerName": "Indivior Inc.",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181109",
"SamplePackage": "N",
"IndicationAndUsage": "PERSERIS is indicated for the treatment of schizophrenia in adults [see Clinical Studies ( 14)] .",
"Description": "PERSERIS contains risperidone, an atypical antipsychotic. Risperidone belongs to the chemical class of benzisoxazole derivatives. The chemical designation 3-[2-[4-(6-fluoro-1,2-benzoxazol-3-yl) piperidin-1-yl] ethyl]-2-methyl-6,7,8,9-tetrahydropyrido[1,2-a] pyrimidin-4-one. Its molecular formula is C 23H 27FN 4O 2and its molecular weight is 410.5 g/mol. The structural formula is. Risperidone is a white to off-white powder. It is practically insoluble in water and soluble in methanol and 0.1 N HCl. PERSERIS is available as a sterile two-syringe mixing system: a liquid syringe prefilled with the delivery system (colorless to yellow solution), and a powder syringe prefilled with risperidone (white to yellow). PERSERIS for extended release injectable suspension, for subcutaneous use, is available in 90 mg and 120 mg risperidone strengths. The quantitative composition is provided below ( Table 6)."
},
{
"NDCCode": "12496-0090-9",
"PackageDescription": "1 KIT in 1 CARTON (12496-0090-9) * 1 SYRINGE in 1 POUCH (12496-0090-2) / 1.2 mL in 1 SYRINGE (12496-0090-5) * 1 SYRINGE in 1 POUCH (12496-0589-2) / 1 mL in 1 SYRINGE (12496-0589-5) ",
"NDC11Code": "12496-0090-09",
"ProductNDC": "12496-0090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Perseris",
"NonProprietaryName": "Risperidone",
"DosageFormName": "KIT",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20181109",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210655",
"LabelerName": "Indivior Inc.",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190212",
"SamplePackage": "Y",
"IndicationAndUsage": "PERSERIS is indicated for the treatment of schizophrenia in adults [see Clinical Studies ( 14)] .",
"Description": "PERSERIS contains risperidone, an atypical antipsychotic. Risperidone belongs to the chemical class of benzisoxazole derivatives. The chemical designation 3-[2-[4-(6-fluoro-1,2-benzoxazol-3-yl) piperidin-1-yl] ethyl]-2-methyl-6,7,8,9-tetrahydropyrido[1,2-a] pyrimidin-4-one. Its molecular formula is C 23H 27FN 4O 2and its molecular weight is 410.5 g/mol. The structural formula is. Risperidone is a white to off-white powder. It is practically insoluble in water and soluble in methanol and 0.1 N HCl. PERSERIS is available as a sterile two-syringe mixing system: a liquid syringe prefilled with the delivery system (colorless to yellow solution), and a powder syringe prefilled with risperidone (white to yellow). PERSERIS for extended release injectable suspension, for subcutaneous use, is available in 90 mg and 120 mg risperidone strengths. The quantitative composition is provided below ( Table 6)."
},
{
"NDCCode": "16590-589-30",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-589-30)",
"NDC11Code": "16590-0589-30",
"ProductNDC": "16590-589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budeprion",
"ProprietaryNameSuffix": "Xl",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20061214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077284",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Major Depressive Disorder: Bupropion hydrochloride extended-release tablets (XL) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of inpatients and in one 6-week controlled trial of outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL TRIALS). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt, or suicidal ideation. The efficacy of bupropion in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial with the sustained-release formulation of bupropion (see CLINICAL TRIALS). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (XL) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.",
"Description": "Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. BUDEPRION XL 150MG STRUCTURE IMAGE. Bupropion hydrochloride extended-release tablets (XL) are supplied for oral administration as 150-mg and 300-mg, round white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ethyl alcohol, ethylcellulose, hydrochloric acid, hydroxypropylcellulose, methacrylic acid copolymer, povidone, silicon dioxide and hydrogenated vegetable oil. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. USP drug release testing is pending."
},
{
"NDCCode": "16590-589-60",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-589-60)",
"NDC11Code": "16590-0589-60",
"ProductNDC": "16590-589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budeprion",
"ProprietaryNameSuffix": "Xl",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20061214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077284",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Major Depressive Disorder: Bupropion hydrochloride extended-release tablets (XL) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of inpatients and in one 6-week controlled trial of outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL TRIALS). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt, or suicidal ideation. The efficacy of bupropion in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial with the sustained-release formulation of bupropion (see CLINICAL TRIALS). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (XL) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.",
"Description": "Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. BUDEPRION XL 150MG STRUCTURE IMAGE. Bupropion hydrochloride extended-release tablets (XL) are supplied for oral administration as 150-mg and 300-mg, round white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ethyl alcohol, ethylcellulose, hydrochloric acid, hydroxypropylcellulose, methacrylic acid copolymer, povidone, silicon dioxide and hydrogenated vegetable oil. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. USP drug release testing is pending."
},
{
"NDCCode": "16590-589-90",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-589-90)",
"NDC11Code": "16590-0589-90",
"ProductNDC": "16590-589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Budeprion",
"ProprietaryNameSuffix": "Xl",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20061214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077284",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Major Depressive Disorder: Bupropion hydrochloride extended-release tablets (XL) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of inpatients and in one 6-week controlled trial of outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL TRIALS). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt, or suicidal ideation. The efficacy of bupropion in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial with the sustained-release formulation of bupropion (see CLINICAL TRIALS). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (XL) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.",
"Description": "Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. BUDEPRION XL 150MG STRUCTURE IMAGE. Bupropion hydrochloride extended-release tablets (XL) are supplied for oral administration as 150-mg and 300-mg, round white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ethyl alcohol, ethylcellulose, hydrochloric acid, hydroxypropylcellulose, methacrylic acid copolymer, povidone, silicon dioxide and hydrogenated vegetable oil. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. USP drug release testing is pending."
},
{
"NDCCode": "30142-589-16",
"PackageDescription": "59 mL in 1 BOTTLE, PLASTIC (30142-589-16) ",
"NDC11Code": "30142-0589-16",
"ProductNDC": "30142-589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Ethyl Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170110",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Krogers",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "545",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20170110",
"SamplePackage": "N",
"IndicationAndUsage": "to decrease bacteria on the skin that could cause disease. recommended for repeated use."
},
{
"NDCCode": "30142-589-34",
"PackageDescription": "236 mL in 1 BOTTLE, PLASTIC (30142-589-34) ",
"NDC11Code": "30142-0589-34",
"ProductNDC": "30142-589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Ethyl Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170110",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Krogers",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "545",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20170110",
"SamplePackage": "N",
"IndicationAndUsage": "to decrease bacteria on the skin that could cause disease. recommended for repeated use."
},
{
"NDCCode": "31722-589-01",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (31722-589-01) ",
"NDC11Code": "31722-0589-01",
"ProductNDC": "31722-589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205541",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201106",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol succinate extended-release tablets, are a beta-adrenergic blocker indicated for the treatment of: 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Angina Pectoris. ( 1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart failure hospitalizations in patients with heart failure ( 1.3) .",
"Description": "Metoprolol succinate, USP is a beta 1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate, USP in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate, USP equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate, USP is a white to off white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in alcohol and slightly soluble in isopropyl alcohol. Inactive ingredients: acetyl tributyl citrate, crospovidone, ethylcellulose, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, methylene chloride, microcrystalline cellulose, polyethylene glycol, polysorbate 80, silicified microcrystalline cellulose, sodium stearyl fumarate and titanium dioxide. Colorcoat glow is used as a polishing agent."
},
{
"NDCCode": "31722-589-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (31722-589-05) ",
"NDC11Code": "31722-0589-05",
"ProductNDC": "31722-589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205541",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210423",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol succinate extended-release tablets, are a beta-adrenergic blocker indicated for the treatment of: 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Angina Pectoris. ( 1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart failure hospitalizations in patients with heart failure ( 1.3) .",
"Description": "Metoprolol succinate, USP is a beta 1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate, USP in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate, USP equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate, USP is a white to off white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in alcohol and slightly soluble in isopropyl alcohol. Inactive ingredients: acetyl tributyl citrate, crospovidone, ethylcellulose, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, methylene chloride, microcrystalline cellulose, polyethylene glycol, polysorbate 80, silicified microcrystalline cellulose, sodium stearyl fumarate and titanium dioxide. Colorcoat glow is used as a polishing agent."
},
{
"NDCCode": "31722-589-10",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (31722-589-10) ",
"NDC11Code": "31722-0589-10",
"ProductNDC": "31722-589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205541",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210423",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol succinate extended-release tablets, are a beta-adrenergic blocker indicated for the treatment of: 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Angina Pectoris. ( 1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart failure hospitalizations in patients with heart failure ( 1.3) .",
"Description": "Metoprolol succinate, USP is a beta 1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate, USP in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate, USP equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate, USP is a white to off white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in alcohol and slightly soluble in isopropyl alcohol. Inactive ingredients: acetyl tributyl citrate, crospovidone, ethylcellulose, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, methylene chloride, microcrystalline cellulose, polyethylene glycol, polysorbate 80, silicified microcrystalline cellulose, sodium stearyl fumarate and titanium dioxide. Colorcoat glow is used as a polishing agent."
},
{
"NDCCode": "31722-589-30",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (31722-589-30) ",
"NDC11Code": "31722-0589-30",
"ProductNDC": "31722-589",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20201106",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205541",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201106",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol succinate extended-release tablets, are a beta-adrenergic blocker indicated for the treatment of: 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Angina Pectoris. ( 1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart failure hospitalizations in patients with heart failure ( 1.3) .",
"Description": "Metoprolol succinate, USP is a beta 1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate, USP in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate, USP equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate, USP is a white to off white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in alcohol and slightly soluble in isopropyl alcohol. Inactive ingredients: acetyl tributyl citrate, crospovidone, ethylcellulose, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, methylene chloride, microcrystalline cellulose, polyethylene glycol, polysorbate 80, silicified microcrystalline cellulose, sodium stearyl fumarate and titanium dioxide. Colorcoat glow is used as a polishing agent."
},
{
"NDCCode": "36800-589-14",
"PackageDescription": "162.7 mL in 1 CAN (36800-589-14) ",
"NDC11Code": "36800-0589-14",
"ProductNDC": "36800-589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "70% Isopropyl Rubbing Alcohol",
"NonProprietaryName": "Isopropyl Rubbing Alcohol",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150828",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Topco Associates LLC",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211220",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "36800-589-43",
"PackageDescription": "473 mL in 1 BOTTLE, PLASTIC (36800-589-43) ",
"NDC11Code": "36800-0589-43",
"ProductNDC": "36800-589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "70% Isopropyl Rubbing Alcohol",
"NonProprietaryName": "Isopropyl Rubbing Alcohol",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150828",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Topco Associates LLC",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150828",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "36800-589-45",
"PackageDescription": "946 mL in 1 BOTTLE, PLASTIC (36800-589-45) ",
"NDC11Code": "36800-0589-45",
"ProductNDC": "36800-589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "70% Isopropyl Rubbing Alcohol",
"NonProprietaryName": "Isopropyl Rubbing Alcohol",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150828",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Topco Associates LLC",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150828",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "36800-589-72",
"PackageDescription": "295 mL in 1 BOTTLE, SPRAY (36800-589-72) ",
"NDC11Code": "36800-0589-72",
"ProductNDC": "36800-589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "70% Isopropyl Rubbing Alcohol",
"NonProprietaryName": "Isopropyl Rubbing Alcohol",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150828",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Topco Associates LLC",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150828",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns."
},
{
"NDCCode": "37205-589-03",
"PackageDescription": "1 KIT in 1 PACKAGE, COMBINATION (37205-589-03) * 3 SUPPOSITORY in 1 BLISTER PACK * 9 g in 1 TUBE",
"NDC11Code": "37205-0589-03",
"ProductNDC": "37205-589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Miconazole 3 Combination Pack",
"NonProprietaryName": "Miconazole Nitrate",
"DosageFormName": "KIT",
"RouteName": "VAGINAL",
"StartMarketingDate": "20010202",
"EndMarketingDate": "20241231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074926",
"LabelerName": "Cardinal Health (Leader) 37205",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20010202",
"EndMarketingDatePackage": "20241231",
"SamplePackage": "N",
"IndicationAndUsage": "treats vaginal yeast infections. relieves external itching and irritation due to a vaginal yeast infection."
},
{
"NDCCode": "41250-589-03",
"PackageDescription": "1470 mL in 1 BOTTLE, PLASTIC (41250-589-03) ",
"NDC11Code": "41250-0589-03",
"ProductNDC": "41250-589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Wash",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140610",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140610",
"SamplePackage": "N",
"IndicationAndUsage": "for handwashing to decrease bacteria on the skin."
},
{
"NDCCode": "41250-589-68",
"PackageDescription": "1656 mL in 1 BOTTLE, PLASTIC (41250-589-68) ",
"NDC11Code": "41250-0589-68",
"ProductNDC": "41250-589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Wash",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140610",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20140610",
"SamplePackage": "N",
"IndicationAndUsage": "for handwashing to decrease bacteria on the skin."
},
{
"NDCCode": "41250-589-81",
"PackageDescription": "332 mL in 1 BOTTLE, PLASTIC (41250-589-81) ",
"NDC11Code": "41250-0589-81",
"ProductNDC": "41250-589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Wash",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140610",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2025-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140610",
"SamplePackage": "N",
"IndicationAndUsage": "for handwashing to decrease bacteria on the skin."
},
{
"NDCCode": "41250-589-96",
"PackageDescription": "221 mL in 1 BOTTLE, PLASTIC (41250-589-96) ",
"NDC11Code": "41250-0589-96",
"ProductNDC": "41250-589",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Wash",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140610",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2025-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20140610",
"SamplePackage": "N",
"IndicationAndUsage": "for handwashing to decrease bacteria on the skin."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0589-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0589-3)</PackageDescription>
<NDC11Code>49288-0589-03</NDC11Code>
<ProductNDC>49288-0589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Washington/oregon Inland Tree Mixture</ProprietaryName>
<NonProprietaryName>Washington/oregon Inland Tree Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960712</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>POPULUS TREMULOIDES POLLEN; POPULUS BALSAMIFERA SUBSP. TRICHOCARPA POLLEN; ACER NEGUNDO POLLEN; PINUS CONTORTA POLLEN; FRAXINUS LATIFOLIA POLLEN; ALNUS RHOMBIFOLIA POLLEN; BETULA OCCIDENTALIS POLLEN; PINUS PONDEROSA POLLEN; SALIX LUCIDA SSP. LASIANDRA POLLEN</SubstanceName>
<StrengthNumber>.0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>37662-0589-3</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (37662-0589-3) </PackageDescription>
<NDC11Code>37662-0589-03</NDC11Code>
<ProductNDC>37662-0589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cuprum Aceticum</ProprietaryName>
<NonProprietaryName>Cuprum Aceticum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220615</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>CUPRIC ACETATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>60505-0589-3</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (60505-0589-3) / 15 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>60505-0589-03</NDC11Code>
<ProductNDC>60505-0589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brimonidine Tartrate/timolol Maleate Ophthalmic Solution</ProprietaryName>
<NonProprietaryName>Brimonidine Tartrate And Timolol Maleate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20221019</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091442</ApplicationNumber>
<LabelerName>Apotex Corp.</LabelerName>
<SubstanceName>BRIMONIDINE TARTRATE; TIMOLOL MALEATE</SubstanceName>
<StrengthNumber>2; 5</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Antagonists [MoA], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brimonidine Tartrate/Timolol Maleate Ophthalmic Solution is indicated for the reduction of elevated intraocular pressure (IOP) in patients with glaucoma or ocular hypertension who require adjunctive or replacement therapy due to inadequately controlled IOP. The IOP-lowering of brimonidine tartrate/timolol maleate ophthalmic solution dosed twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol maleate ophthalmic solution dosed twice a day and 0.2% brimonidine tartrate ophthalmic solution dosed three times per day.</IndicationAndUsage>
<Description>Brimonidine Tartrate/Timolol Maleate Ophthalmic Solution 0.2%/0.5%, sterile, contains brimonidine tartrate, a relatively selective alpha-2 adrenergic receptor agonist, and timolol maleate, a non-selective beta-adrenergic receptor inhibitor (topical intraocular pressure lowering agent) for topical ophthalmic use. The structural formulae are. Brimonidine tartrate. 5-Bromo-6-(-2-imidazolin-2-ylamino) quinoxaline D-tartrate (1:1); Molecular Weight is 442.22. Timolol maleate. (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5-thiadiazol-3-yl)-oxy]-2-propanol maleate (1:1) (salt); Molecular Weight is 432.5 as the maleate salt. In solution, Brimonidine Tartrate/Timolol Maleate Ophthalmic Solution has a clear, greenish-yellow color. It has an osmolality of 260 to 330 mOsmol/kg and a pH during its shelf life of 6.5 to 7.3. Brimonidine tartrate appears as a white to slightly yellowish powder and is soluble in both water (1.5 mg/mL) and in the product vehicle (3 mg/mL) at pH 7.2. Timolol maleate appears as a white or practically white, odorless, crystalline powder and is soluble in water, methanol, and alcohol. Each mL of Brimonidine Tartrate/Timolol Maleate Ophthalmic Solution contains the active ingredients brimonidine tartrate 0.2% and timolol 0.5% (6.8 mg/mL timolol maleate) with the inactive ingredients benzalkonium chloride 0.005%; sodium phosphate dibasic heptahydrate, sodium phosphate monobasic monohydrate; water for injection; and hydrochloric acid and/or sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>67296-0589-3</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (67296-0589-3) </PackageDescription>
<NDC11Code>67296-0589-03</NDC11Code>
<ProductNDC>67296-0589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<EndMarketingDate>20221130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040656</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; HYDROCODONE BITARTRATE</SubstanceName>
<StrengthNumber>325; 7.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2022-12-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<EndMarketingDatePackage>20221130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>80425-0589-3</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (80425-0589-3) </PackageDescription>
<NDC11Code>80425-0589-03</NDC11Code>
<ProductNDC>80425-0589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260710</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217400</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: active duodenal ulcer (DU). active gastric ulcer (GU). symptomatic nonerosive gastroesophageal reflux disease (GERD). erosive esophagitis due to GERD, diagnosed by biopsy. Famotidine tablets are indicated in adults for the: treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome, multiple endocrine neoplasias). reduction of the risk of duodenal ulcer recurrence.</IndicationAndUsage>
<Description>The active ingredient in famotidine tablets USP is a histamine-2 (H 2) receptor antagonist. Famotidine is 3-[[2-(Diaminomethyleneamino)thiazol-4-yl]methylthio] -N'–Sulfamoylpropanimidamide. The molecular formula of famotidine is C 8H 15N 7O 2S 3and its molecular weight is 337.45. Its structural formula is:. Each famotidine tablet for oral administration contains either 20 mg or 40 mg of famotidine USP and the following inactive ingredients: corn starch, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate and titanium dioxide. In addition the 20 mg tablets contain iron oxide yellow. Famotidine USP is a White to yellowish-white, crystalline powder or crystals that is freely soluble in glacial acetic acid and dimethyl formamide, very slightly soluble in methanol, practically insoluble in ethanol and ethyl acetate. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>49288-0589-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0589-1)</PackageDescription>
<NDC11Code>49288-0589-01</NDC11Code>
<ProductNDC>49288-0589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Washington/oregon Inland Tree Mixture</ProprietaryName>
<NonProprietaryName>Washington/oregon Inland Tree Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960712</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>POPULUS TREMULOIDES POLLEN; POPULUS BALSAMIFERA SUBSP. TRICHOCARPA POLLEN; ACER NEGUNDO POLLEN; PINUS CONTORTA POLLEN; FRAXINUS LATIFOLIA POLLEN; ALNUS RHOMBIFOLIA POLLEN; BETULA OCCIDENTALIS POLLEN; PINUS PONDEROSA POLLEN; SALIX LUCIDA SSP. LASIANDRA POLLEN</SubstanceName>
<StrengthNumber>.0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0589-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0589-2)</PackageDescription>
<NDC11Code>49288-0589-02</NDC11Code>
<ProductNDC>49288-0589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Washington/oregon Inland Tree Mixture</ProprietaryName>
<NonProprietaryName>Washington/oregon Inland Tree Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960712</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>POPULUS TREMULOIDES POLLEN; POPULUS BALSAMIFERA SUBSP. TRICHOCARPA POLLEN; ACER NEGUNDO POLLEN; PINUS CONTORTA POLLEN; FRAXINUS LATIFOLIA POLLEN; ALNUS RHOMBIFOLIA POLLEN; BETULA OCCIDENTALIS POLLEN; PINUS PONDEROSA POLLEN; SALIX LUCIDA SSP. LASIANDRA POLLEN</SubstanceName>
<StrengthNumber>.0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0589-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0589-4)</PackageDescription>
<NDC11Code>49288-0589-04</NDC11Code>
<ProductNDC>49288-0589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Washington/oregon Inland Tree Mixture</ProprietaryName>
<NonProprietaryName>Washington/oregon Inland Tree Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960712</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>POPULUS TREMULOIDES POLLEN; POPULUS BALSAMIFERA SUBSP. TRICHOCARPA POLLEN; ACER NEGUNDO POLLEN; PINUS CONTORTA POLLEN; FRAXINUS LATIFOLIA POLLEN; ALNUS RHOMBIFOLIA POLLEN; BETULA OCCIDENTALIS POLLEN; PINUS PONDEROSA POLLEN; SALIX LUCIDA SSP. LASIANDRA POLLEN</SubstanceName>
<StrengthNumber>.0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0589-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0589-5)</PackageDescription>
<NDC11Code>49288-0589-05</NDC11Code>
<ProductNDC>49288-0589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Washington/oregon Inland Tree Mixture</ProprietaryName>
<NonProprietaryName>Washington/oregon Inland Tree Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19960712</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>POPULUS TREMULOIDES POLLEN; POPULUS BALSAMIFERA SUBSP. TRICHOCARPA POLLEN; ACER NEGUNDO POLLEN; PINUS CONTORTA POLLEN; FRAXINUS LATIFOLIA POLLEN; ALNUS RHOMBIFOLIA POLLEN; BETULA OCCIDENTALIS POLLEN; PINUS PONDEROSA POLLEN; SALIX LUCIDA SSP. LASIANDRA POLLEN</SubstanceName>
<StrengthNumber>.0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056; .0056</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>10135-589-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (10135-589-01)</PackageDescription>
<NDC11Code>10135-0589-01</NDC11Code>
<ProductNDC>10135-589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pilocarpine Hydrochloride</ProprietaryName>
<NonProprietaryName>Pilocarpine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077220</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>PILOCARPINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Agonists [MoA],Cholinergic Muscarinic Agonists [MoA],Cholinergic Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Pilocarpine hydrochloride tablets, USP are indicated for 1) the treatment of symptoms of dry mouth from salivary gland hypofunction caused by radiotherapy for cancer of the head and neck; and 2) the treatment of symptoms of dry mouth in patients with Sjogren’s syndrome.</IndicationAndUsage>
<Description>Pilocarpine hydrochloride tablets, USP contain pilocarpine hydrochloride, a cholinergic agonist for oral use. Pilocarpine hydrochloride, USP is a hygroscopic, odorless, bitter tasting white crystal or powder, which is soluble in water and alcohol and virtually insoluble in most non-polar solvents. Pilocarpine hydrochloride, USP with a chemical name of (3S-cis)-2(3H)-Furanone, 3-ethyldihydro-4-[(1-methyl-1H-imidazol-5-yl) methyl] monohydrochloride, has a molecular weight of 244.72. Each 5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet’s film coating is: polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc. Each 7.5 mg Pilocarpine Hydrochloride Tablet, USP for oral administration contains 7.5 mg of pilocarpine hydrochloride. Inactive ingredients in the tablet are microcrystalline cellulose and stearic acid, the tablet’s film coating is: FD&C Blue #2/Indigo Carmine aluminum lake, polyvinyl alcohol, titanium dioxide, polyethylene glycol, and talc.</Description>
</NDC>
<NDC>
<NDCCode>12496-0090-1</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (12496-0090-1) * 1 SYRINGE in 1 POUCH (12496-0090-2) / 1.2 mL in 1 SYRINGE (12496-0090-5) * 1 SYRINGE in 1 POUCH (12496-0589-2) / 1 mL in 1 SYRINGE (12496-0589-5) </PackageDescription>
<NDC11Code>12496-0090-01</NDC11Code>
<ProductNDC>12496-0090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Perseris</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20181109</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210655</ApplicationNumber>
<LabelerName>Indivior Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PERSERIS is indicated for the treatment of schizophrenia in adults [see Clinical Studies ( 14)] .</IndicationAndUsage>
<Description>PERSERIS contains risperidone, an atypical antipsychotic. Risperidone belongs to the chemical class of benzisoxazole derivatives. The chemical designation 3-[2-[4-(6-fluoro-1,2-benzoxazol-3-yl) piperidin-1-yl] ethyl]-2-methyl-6,7,8,9-tetrahydropyrido[1,2-a] pyrimidin-4-one. Its molecular formula is C 23H 27FN 4O 2and its molecular weight is 410.5 g/mol. The structural formula is. Risperidone is a white to off-white powder. It is practically insoluble in water and soluble in methanol and 0.1 N HCl. PERSERIS is available as a sterile two-syringe mixing system: a liquid syringe prefilled with the delivery system (colorless to yellow solution), and a powder syringe prefilled with risperidone (white to yellow). PERSERIS for extended release injectable suspension, for subcutaneous use, is available in 90 mg and 120 mg risperidone strengths. The quantitative composition is provided below ( Table 6).</Description>
</NDC>
<NDC>
<NDCCode>12496-0090-9</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (12496-0090-9) * 1 SYRINGE in 1 POUCH (12496-0090-2) / 1.2 mL in 1 SYRINGE (12496-0090-5) * 1 SYRINGE in 1 POUCH (12496-0589-2) / 1 mL in 1 SYRINGE (12496-0589-5) </PackageDescription>
<NDC11Code>12496-0090-09</NDC11Code>
<ProductNDC>12496-0090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Perseris</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20181109</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210655</ApplicationNumber>
<LabelerName>Indivior Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190212</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>PERSERIS is indicated for the treatment of schizophrenia in adults [see Clinical Studies ( 14)] .</IndicationAndUsage>
<Description>PERSERIS contains risperidone, an atypical antipsychotic. Risperidone belongs to the chemical class of benzisoxazole derivatives. The chemical designation 3-[2-[4-(6-fluoro-1,2-benzoxazol-3-yl) piperidin-1-yl] ethyl]-2-methyl-6,7,8,9-tetrahydropyrido[1,2-a] pyrimidin-4-one. Its molecular formula is C 23H 27FN 4O 2and its molecular weight is 410.5 g/mol. The structural formula is. Risperidone is a white to off-white powder. It is practically insoluble in water and soluble in methanol and 0.1 N HCl. PERSERIS is available as a sterile two-syringe mixing system: a liquid syringe prefilled with the delivery system (colorless to yellow solution), and a powder syringe prefilled with risperidone (white to yellow). PERSERIS for extended release injectable suspension, for subcutaneous use, is available in 90 mg and 120 mg risperidone strengths. The quantitative composition is provided below ( Table 6).</Description>
</NDC>
<NDC>
<NDCCode>16590-589-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-589-30)</PackageDescription>
<NDC11Code>16590-0589-30</NDC11Code>
<ProductNDC>16590-589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budeprion</ProprietaryName>
<ProprietaryNameSuffix>Xl</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20061214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077284</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Major Depressive Disorder: Bupropion hydrochloride extended-release tablets (XL) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of inpatients and in one 6-week controlled trial of outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL TRIALS). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt, or suicidal ideation. The efficacy of bupropion in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial with the sustained-release formulation of bupropion (see CLINICAL TRIALS). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (XL) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. BUDEPRION XL 150MG STRUCTURE IMAGE. Bupropion hydrochloride extended-release tablets (XL) are supplied for oral administration as 150-mg and 300-mg, round white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ethyl alcohol, ethylcellulose, hydrochloric acid, hydroxypropylcellulose, methacrylic acid copolymer, povidone, silicon dioxide and hydrogenated vegetable oil. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. USP drug release testing is pending.</Description>
</NDC>
<NDC>
<NDCCode>16590-589-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-589-60)</PackageDescription>
<NDC11Code>16590-0589-60</NDC11Code>
<ProductNDC>16590-589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budeprion</ProprietaryName>
<ProprietaryNameSuffix>Xl</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20061214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077284</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Major Depressive Disorder: Bupropion hydrochloride extended-release tablets (XL) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of inpatients and in one 6-week controlled trial of outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL TRIALS). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt, or suicidal ideation. The efficacy of bupropion in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial with the sustained-release formulation of bupropion (see CLINICAL TRIALS). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (XL) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. BUDEPRION XL 150MG STRUCTURE IMAGE. Bupropion hydrochloride extended-release tablets (XL) are supplied for oral administration as 150-mg and 300-mg, round white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ethyl alcohol, ethylcellulose, hydrochloric acid, hydroxypropylcellulose, methacrylic acid copolymer, povidone, silicon dioxide and hydrogenated vegetable oil. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. USP drug release testing is pending.</Description>
</NDC>
<NDC>
<NDCCode>16590-589-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-589-90)</PackageDescription>
<NDC11Code>16590-0589-90</NDC11Code>
<ProductNDC>16590-589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Budeprion</ProprietaryName>
<ProprietaryNameSuffix>Xl</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20061214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077284</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Major Depressive Disorder: Bupropion hydrochloride extended-release tablets (XL) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of inpatients and in one 6-week controlled trial of outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL TRIALS). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt, or suicidal ideation. The efficacy of bupropion in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial with the sustained-release formulation of bupropion (see CLINICAL TRIALS). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (XL) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. BUDEPRION XL 150MG STRUCTURE IMAGE. Bupropion hydrochloride extended-release tablets (XL) are supplied for oral administration as 150-mg and 300-mg, round white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ethyl alcohol, ethylcellulose, hydrochloric acid, hydroxypropylcellulose, methacrylic acid copolymer, povidone, silicon dioxide and hydrogenated vegetable oil. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. USP drug release testing is pending.</Description>
</NDC>
<NDC>
<NDCCode>30142-589-16</NDCCode>
<PackageDescription>59 mL in 1 BOTTLE, PLASTIC (30142-589-16) </PackageDescription>
<NDC11Code>30142-0589-16</NDC11Code>
<ProductNDC>30142-589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170110</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Krogers</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>545</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>to decrease bacteria on the skin that could cause disease. recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>30142-589-34</NDCCode>
<PackageDescription>236 mL in 1 BOTTLE, PLASTIC (30142-589-34) </PackageDescription>
<NDC11Code>30142-0589-34</NDC11Code>
<ProductNDC>30142-589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170110</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Krogers</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>545</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>to decrease bacteria on the skin that could cause disease. recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>31722-589-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (31722-589-01) </PackageDescription>
<NDC11Code>31722-0589-01</NDC11Code>
<ProductNDC>31722-589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205541</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol succinate extended-release tablets, are a beta-adrenergic blocker indicated for the treatment of: 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Angina Pectoris. ( 1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart failure hospitalizations in patients with heart failure ( 1.3) .</IndicationAndUsage>
<Description>Metoprolol succinate, USP is a beta 1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate, USP in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate, USP equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate, USP is a white to off white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in alcohol and slightly soluble in isopropyl alcohol. Inactive ingredients: acetyl tributyl citrate, crospovidone, ethylcellulose, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, methylene chloride, microcrystalline cellulose, polyethylene glycol, polysorbate 80, silicified microcrystalline cellulose, sodium stearyl fumarate and titanium dioxide. Colorcoat glow is used as a polishing agent.</Description>
</NDC>
<NDC>
<NDCCode>31722-589-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (31722-589-05) </PackageDescription>
<NDC11Code>31722-0589-05</NDC11Code>
<ProductNDC>31722-589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205541</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210423</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol succinate extended-release tablets, are a beta-adrenergic blocker indicated for the treatment of: 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Angina Pectoris. ( 1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart failure hospitalizations in patients with heart failure ( 1.3) .</IndicationAndUsage>
<Description>Metoprolol succinate, USP is a beta 1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate, USP in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate, USP equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate, USP is a white to off white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in alcohol and slightly soluble in isopropyl alcohol. Inactive ingredients: acetyl tributyl citrate, crospovidone, ethylcellulose, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, methylene chloride, microcrystalline cellulose, polyethylene glycol, polysorbate 80, silicified microcrystalline cellulose, sodium stearyl fumarate and titanium dioxide. Colorcoat glow is used as a polishing agent.</Description>
</NDC>
<NDC>
<NDCCode>31722-589-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (31722-589-10) </PackageDescription>
<NDC11Code>31722-0589-10</NDC11Code>
<ProductNDC>31722-589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205541</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210423</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol succinate extended-release tablets, are a beta-adrenergic blocker indicated for the treatment of: 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Angina Pectoris. ( 1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart failure hospitalizations in patients with heart failure ( 1.3) .</IndicationAndUsage>
<Description>Metoprolol succinate, USP is a beta 1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate, USP in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate, USP equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate, USP is a white to off white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in alcohol and slightly soluble in isopropyl alcohol. Inactive ingredients: acetyl tributyl citrate, crospovidone, ethylcellulose, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, methylene chloride, microcrystalline cellulose, polyethylene glycol, polysorbate 80, silicified microcrystalline cellulose, sodium stearyl fumarate and titanium dioxide. Colorcoat glow is used as a polishing agent.</Description>
</NDC>
<NDC>
<NDCCode>31722-589-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (31722-589-30) </PackageDescription>
<NDC11Code>31722-0589-30</NDC11Code>
<ProductNDC>31722-589</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201106</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205541</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol succinate extended-release tablets, are a beta-adrenergic blocker indicated for the treatment of: 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Angina Pectoris. ( 1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart failure hospitalizations in patients with heart failure ( 1.3) .</IndicationAndUsage>
<Description>Metoprolol succinate, USP is a beta 1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate, USP in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate, USP equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate, USP is a white to off white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in alcohol and slightly soluble in isopropyl alcohol. Inactive ingredients: acetyl tributyl citrate, crospovidone, ethylcellulose, hydroxypropyl cellulose, hypromellose, isopropyl alcohol, methylene chloride, microcrystalline cellulose, polyethylene glycol, polysorbate 80, silicified microcrystalline cellulose, sodium stearyl fumarate and titanium dioxide. Colorcoat glow is used as a polishing agent.</Description>
</NDC>
<NDC>
<NDCCode>36800-589-14</NDCCode>
<PackageDescription>162.7 mL in 1 CAN (36800-589-14) </PackageDescription>
<NDC11Code>36800-0589-14</NDC11Code>
<ProductNDC>36800-589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>70% Isopropyl Rubbing Alcohol</ProprietaryName>
<NonProprietaryName>Isopropyl Rubbing Alcohol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150828</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Topco Associates LLC</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>36800-589-43</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE, PLASTIC (36800-589-43) </PackageDescription>
<NDC11Code>36800-0589-43</NDC11Code>
<ProductNDC>36800-589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>70% Isopropyl Rubbing Alcohol</ProprietaryName>
<NonProprietaryName>Isopropyl Rubbing Alcohol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150828</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Topco Associates LLC</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>36800-589-45</NDCCode>
<PackageDescription>946 mL in 1 BOTTLE, PLASTIC (36800-589-45) </PackageDescription>
<NDC11Code>36800-0589-45</NDC11Code>
<ProductNDC>36800-589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>70% Isopropyl Rubbing Alcohol</ProprietaryName>
<NonProprietaryName>Isopropyl Rubbing Alcohol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150828</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Topco Associates LLC</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>36800-589-72</NDCCode>
<PackageDescription>295 mL in 1 BOTTLE, SPRAY (36800-589-72) </PackageDescription>
<NDC11Code>36800-0589-72</NDC11Code>
<ProductNDC>36800-589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>70% Isopropyl Rubbing Alcohol</ProprietaryName>
<NonProprietaryName>Isopropyl Rubbing Alcohol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150828</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Topco Associates LLC</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent the risk of infection in: 1 minor cuts, 2 scrapes, 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37205-589-03</NDCCode>
<PackageDescription>1 KIT in 1 PACKAGE, COMBINATION (37205-589-03) * 3 SUPPOSITORY in 1 BLISTER PACK * 9 g in 1 TUBE</PackageDescription>
<NDC11Code>37205-0589-03</NDC11Code>
<ProductNDC>37205-589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Miconazole 3 Combination Pack</ProprietaryName>
<NonProprietaryName>Miconazole Nitrate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>VAGINAL</RouteName>
<StartMarketingDate>20010202</StartMarketingDate>
<EndMarketingDate>20241231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074926</ApplicationNumber>
<LabelerName>Cardinal Health (Leader) 37205</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20010202</StartMarketingDatePackage>
<EndMarketingDatePackage>20241231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>treats vaginal yeast infections. relieves external itching and irritation due to a vaginal yeast infection.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41250-589-03</NDCCode>
<PackageDescription>1470 mL in 1 BOTTLE, PLASTIC (41250-589-03) </PackageDescription>
<NDC11Code>41250-0589-03</NDC11Code>
<ProductNDC>41250-589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Wash</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140610</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for handwashing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41250-589-68</NDCCode>
<PackageDescription>1656 mL in 1 BOTTLE, PLASTIC (41250-589-68) </PackageDescription>
<NDC11Code>41250-0589-68</NDC11Code>
<ProductNDC>41250-589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Wash</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140610</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for handwashing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41250-589-81</NDCCode>
<PackageDescription>332 mL in 1 BOTTLE, PLASTIC (41250-589-81) </PackageDescription>
<NDC11Code>41250-0589-81</NDC11Code>
<ProductNDC>41250-589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Wash</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140610</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for handwashing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41250-589-96</NDCCode>
<PackageDescription>221 mL in 1 BOTTLE, PLASTIC (41250-589-96) </PackageDescription>
<NDC11Code>41250-0589-96</NDC11Code>
<ProductNDC>41250-589</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Wash</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140610</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for handwashing to decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
</NDCList>