{
"NDC": [
{
"NDCCode": "49288-0611-4",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49288-0611-4)",
"NDC11Code": "49288-0611-04",
"ProductNDC": "49288-0611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Number Two Weed Mixture",
"NonProprietaryName": "Number Two Weed Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN",
"StrengthNumber": ".01; .01; .01; .01; .01",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0611-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0611-1)",
"NDC11Code": "49288-0611-01",
"ProductNDC": "49288-0611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Number Two Weed Mixture",
"NonProprietaryName": "Number Two Weed Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN",
"StrengthNumber": ".01; .01; .01; .01; .01",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0611-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0611-2)",
"NDC11Code": "49288-0611-02",
"ProductNDC": "49288-0611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Number Two Weed Mixture",
"NonProprietaryName": "Number Two Weed Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN",
"StrengthNumber": ".01; .01; .01; .01; .01",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0611-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0611-3)",
"NDC11Code": "49288-0611-03",
"ProductNDC": "49288-0611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Number Two Weed Mixture",
"NonProprietaryName": "Number Two Weed Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN",
"StrengthNumber": ".01; .01; .01; .01; .01",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0611-5",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49288-0611-5)",
"NDC11Code": "49288-0611-05",
"ProductNDC": "49288-0611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Number Two Weed Mixture",
"NonProprietaryName": "Number Two Weed Mixture",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN",
"StrengthNumber": ".01; .01; .01; .01; .01",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "15631-0611-1",
"PackageDescription": "4 TABLET in 1 BLISTER PACK (15631-0611-1)",
"NDC11Code": "15631-0611-01",
"ProductNDC": "15631-0611",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kali Muriaticum",
"NonProprietaryName": "Kali Muriaticum",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151207",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "15631-0611-4",
"PackageDescription": "250 TABLET in 1 CONTAINER (15631-0611-4)",
"NDC11Code": "15631-0611-04",
"ProductNDC": "15631-0611",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kali Muriaticum",
"NonProprietaryName": "Kali Muriaticum",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20151207",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "54973-0611-4",
"PackageDescription": "250 TABLET in 1 BOTTLE, PLASTIC (54973-0611-4) ",
"NDC11Code": "54973-0611-04",
"ProductNDC": "54973-0611",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Chamomilla",
"NonProprietaryName": "Matricaria Chamomilla Flowering Top Oil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19550101",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hyland's",
"SubstanceName": "MATRICARIA CHAMOMILLA FLOWERING TOP OIL",
"StrengthNumber": "6",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2021-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20130524",
"SamplePackage": "N"
},
{
"NDCCode": "58443-0611-4",
"PackageDescription": "237 mL in 1 BOTTLE, SPRAY (58443-0611-4) ",
"NDC11Code": "58443-0611-04",
"ProductNDC": "58443-0611",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Australian Gold",
"ProprietaryNameSuffix": "Broad Spectrum Spf 50 Sunscreen",
"NonProprietaryName": "Octisalate, Avobenzone, Octocrylene, Homosalate",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20171026",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "M020",
"LabelerName": "Prime Enterprises Inc.",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "29.7; 99.1; 49.6; 49.6",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-09-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20171026",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn if used as directed with other sun protection measures (see Directions) decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "65044-0611-4",
"PackageDescription": "50 mL in 1 VIAL (65044-0611-4) ",
"NDC11Code": "65044-0611-04",
"ProductNDC": "65044-0611",
"ProductTypeName": "STANDARDIZED ALLERGENIC",
"ProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"NonProprietaryName": "Standardized Grass Pollen, Fescue, Meadow",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19980115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103874",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "LOLIUM PRATENSE POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980115",
"SamplePackage": "N",
"IndicationAndUsage": "Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.",
"Description": "This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter."
},
{
"NDCCode": "71335-0611-4",
"PackageDescription": "28 TABLET, CHEWABLE in 1 BOTTLE (71335-0611-4) ",
"NDC11Code": "71335-0611-04",
"ProductNDC": "71335-0611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Montelukast Sodium",
"NonProprietaryName": "Montelukast Sodium",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20120803",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078723",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "MONTELUKAST SODIUM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Leukotriene Receptor Antagonist [EPC],Leukotriene Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20171201",
"SamplePackage": "N"
},
{
"NDCCode": "79481-0611-1",
"PackageDescription": "4 PATCH in 1 CARTON (79481-0611-1) / 1 g in 1 PATCH",
"NDC11Code": "79481-0611-01",
"ProductNDC": "79481-0611",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Medicated Callus Removers Extra Thick",
"NonProprietaryName": "Salicylic Acid",
"DosageFormName": "PATCH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M030",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": "400",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2026-01-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230823",
"SamplePackage": "N",
"IndicationAndUsage": "for the removal of calluses. relieves pain by removing calluses."
},
{
"NDCCode": "0135-0611-01",
"PackageDescription": "150 TABLET, CHEWABLE in 1 BOTTLE (0135-0611-01) ",
"NDC11Code": "00135-0611-01",
"ProductNDC": "0135-0611",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Tums",
"ProprietaryNameSuffix": "Regular Strength",
"NonProprietaryName": "Calcium Carbonate",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20160901",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M001",
"LabelerName": "Haleon US Holdings LLC",
"SubstanceName": "CALCIUM CARBONATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160901",
"SamplePackage": "N",
"IndicationAndUsage": "relieves: 1 heartburn, 2 acid indigestion, 3 sour stomach, 4 upset stomach associated with these symptoms."
},
{
"NDCCode": "0574-0611-05",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (0574-0611-05) / 3.5 mL in 1 BOTTLE, GLASS",
"NDC11Code": "00574-0611-05",
"ProductNDC": "0574-0611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Podofilox",
"NonProprietaryName": "Podofilox",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20020129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075600",
"LabelerName": "Padagis US LLC",
"SubstanceName": "PODOFILOX",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Mitosis [PE]",
"Status": "Active",
"LastUpdate": "2024-03-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020129",
"SamplePackage": "N",
"IndicationAndUsage": "Podofilox Topical Solution 0.5% is indicated for the topical treatment of external genital warts (Condyloma acuminatum). This product is not indicated in the treatment of perianal or mucous membrane warts (see PRECAUTIONS).",
"Description": "Podofilox Topical Solution is an antimitotic drug which can be chemically synthesized or purified from the plant families Coniferae and Berberidaceae (e.g. species of Juniperus and Podophyllum). Podofilox Topical Solution 0.5% is formulated for topical administration. Each milliliter of solution contains 5 mg of podofilox, in a vehicle containing lactic acid and sodium lactate in alcohol 95%, USP. Podofilox has a molecular weight of 414.4 daltons, and is soluble in alcohol and sparingly soluble in water. Its chemical name is 5,8,8a,9-Tetrahydro-9-hydroxy-5-(3,4,5-trimethoxylphenyl)furo[3',4':6,7] naphtho[2,3,d]-1, 3-dioxol-6(5aH)-one. Podofilox has the following structural formula."
},
{
"NDCCode": "10122-611-10",
"PackageDescription": "10 CARTON in 1 CARTON (10122-611-10) / 1 VIAL, SINGLE-USE in 1 CARTON (10122-611-01) / 100 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "10122-0611-10",
"ProductNDC": "10122-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cleviprex",
"NonProprietaryName": "Clevipidine",
"DosageFormName": "EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20080915",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022156",
"LabelerName": "Chiesi USA, Inc.",
"SubstanceName": "CLEVIDIPINE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20080915",
"SamplePackage": "N",
"IndicationAndUsage": "Cleviprex is indicated for the reduction of blood pressure when oral therapy is not feasible or not desirable.",
"Description": "Cleviprex is a sterile, milky-white emulsion containing 0.5 mg/mL of clevidipine suitable for intravenous administration. Clevidipine is a dihydropyridine calcium channel blocker. Chemically, the active substance, clevidipine, is butyroxymethyl methyl 4-(2´,3´-dichlorophenyl)-1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate. It is a racemic mixture with a molecular weight of 456.3 g/mol. Each enantiomer has equipotent antihypertensive activity. The structure and formula are. Clevidipine is practically insoluble in water and is formulated in an oil-in-water emulsion. In addition to the active ingredient, clevidipine, Cleviprex contains soybean oil (200 mg/mL), glycerin (22.5 mg/mL), purified egg yolk phospholipids (12 mg/mL), oleic acid (0.3 mg/mL), disodium edetate (0.05 mg/mL), and sodium hydroxide to adjust pH. Cleviprex has a pH of 6.0 – 8.0 and is a ready-to-use emulsion."
},
{
"NDCCode": "10135-611-01",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (10135-611-01) ",
"NDC11Code": "10135-0611-01",
"ProductNDC": "10135-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxybutynin Chloride",
"NonProprietaryName": "Oxybutynin Chloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204010",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "OXYBUTYNIN CHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC],Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20160201",
"SamplePackage": "N",
"IndicationAndUsage": "Oxybutynin chloride extended-release tablets, USP are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets, USP are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).",
"Description": "Oxybutynin chloride) is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet, USP contains 5 mg, 10 mg, or 15 mg of oxybutynin chloride USP, formulated as a once-a day controlled-release tablet for oral administration. Oxybutynin chloride, USP is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride, USP is d,l (racemic) 4-diethylamino-2-butynyl phenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride, USP is C22H31NO3 HCl. Its structural formula is. Oxybutynin chloride, USP is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablets, USP also contains the following inert ingredients: hydrogenated vegetable oil, hypromellose, isopropyl alcohol, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, polysorbate 80, sodium lauryl sulfate, talc and triethyl citrate. The 5 mg tablets also contain D&C Red #27 and FD&C Blue #1. The 10mg tablets also contain FD&C Red #40 and FD&C Yellow #6. USP Dissolution Test is pending. System Components and Performance. Oxybutynin chloride extended-release tablet, USP uses a pH-independent hydrophilic matrix and pH dependent enteric coating to deliver oxybutynin chloride, USP at a controlled rate over approximately 24 hours. The oxybutynin chloride extended-release tablet, USP comprises of an inner core made of the drug, rate controlling pH independent polymer and other excipients. The tablet core is then coated with pH dependent enteric coating polymer. When tablets will be exposed to an acidic environment such as the stomach, the drug release will be minimal due to outer enteric coating of the pH dependent polymer. The outer enteric coating upon reaching an environment of pH 5.5 and above will start to dissolve and the polymer in the inner core tablet will hydrate to form a gel layer and the drug releases via diffusion process."
},
{
"NDCCode": "13537-611-24",
"PackageDescription": "1 TUBE in 1 BOX (13537-611-24) > 4 g in 1 TUBE (13537-611-23)",
"NDC11Code": "13537-0611-24",
"ProductNDC": "13537-611",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esika Hydracolor 2 In 1 Spf 25",
"ProprietaryNameSuffix": "(rosa Dulzura) - Pink",
"NonProprietaryName": "Octinoxate And Oxybenzone",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151123",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "OCTINOXATE; OXYBENZONE",
"StrengthNumber": ".0664; .0151",
"StrengthUnit": "g/g; g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "13985-611-15",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (13985-611-15) > 15 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "13985-0611-15",
"ProductNDC": "13985-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Proparacaine Hydrochloride",
"NonProprietaryName": "Proparacaine Hydrochloride",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20150327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040277",
"LabelerName": "MWI",
"SubstanceName": "PROPARACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Local Anesthesia [PE], Local Anesthetic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150327",
"SamplePackage": "N",
"IndicationAndUsage": "Proparacaine Hydrochloride Ophthalmic Solution is indicated for topical anesthesia in ophthalmic practice. Representative ophthalmic procedures in which the preparation provides good local anesthesia include measurement of intraocular pressure (tonometry), removal of foreign bodies and sutures from the cornea, conjunctival scraping in diagnosis and gonioscopic examination; it is also indicated for use as a topical anesthetic prior to surgical operations such as cataract extraction.",
"Description": "Proparacaine Hydrochloride Ophthalmic Solution USP, 0.5% is a local anesthetic for ophthalmic instillation. Each mL of sterile, aqueous solution contains: Active: Proparacaine Hydrochloride 5 mg (0.5%). Inactives: Glycerin as a stabilizer, Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust pH (3.5 to 6.0), and Water for Injection. Preservative: Benzalkonium Chloride 0.1 mg (0.01%). Proparacaine hydrochloride is designed chemically as 2-(Diethylamino)ethyl 3-amino-4-propoxybenzoate monohydrochloride. The active ingredient is represented by the structural formula:."
},
{
"NDCCode": "16714-611-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (16714-611-01) ",
"NDC11Code": "16714-0611-01",
"ProductNDC": "16714-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077206",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070206",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].",
"Description": "Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3."
},
{
"NDCCode": "16714-611-02",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (16714-611-02) ",
"NDC11Code": "16714-0611-02",
"ProductNDC": "16714-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077206",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070206",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].",
"Description": "Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3."
},
{
"NDCCode": "16714-611-03",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (16714-611-03) ",
"NDC11Code": "16714-0611-03",
"ProductNDC": "16714-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077206",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070206",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].",
"Description": "Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3."
},
{
"NDCCode": "16714-611-04",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (16714-611-04) ",
"NDC11Code": "16714-0611-04",
"ProductNDC": "16714-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077206",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070206",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].",
"Description": "Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3."
},
{
"NDCCode": "16714-611-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (16714-611-05) ",
"NDC11Code": "16714-0611-05",
"ProductNDC": "16714-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077206",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070206",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].",
"Description": "Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3."
},
{
"NDCCode": "16714-611-06",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (16714-611-06) ",
"NDC11Code": "16714-0611-06",
"ProductNDC": "16714-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077206",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070206",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].",
"Description": "Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3."
},
{
"NDCCode": "23155-611-04",
"PackageDescription": "250 TABLET, DELAYED RELEASE in 1 BOTTLE (23155-611-04) ",
"NDC11Code": "23155-0611-04",
"ProductNDC": "23155-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"ProprietaryNameSuffix": "Delayed Release",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180316",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200856",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180316",
"SamplePackage": "N",
"IndicationAndUsage": "Doxycycline hyclate delayed-release tablets are a tetracycline-class drug indicated for: Rickettsial infections (1.1) Sexually transmitted infections (1.2) Respiratory tract infections (1.3) Specific bacterial infections (1.4) Ophthalmic infections (1.5) Anthrax, including inhalational anthrax (post-exposure) (1.6) Alternative treatment for selected infections when penicillin is contraindicated (1.7) Adjunctive therapy in acute intestinal amebiasis and severe acne (1.8) Prophylaxis of malaria (1.9). UsageTo reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate delayed-release tablets, should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.10).",
"Description": "Doxycycline hyclate delayed-release tablets, USP, contain specially coated pellets of doxycycline hyclate, a tetracycline class drug synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration. The structural formula for doxycycline hyclate is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical name for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet contains doxycycline 75 mg, 100 mg, 150 mg or 200 mg (equivalent to doxycycline hyclate 86.6 mg, 115.4 mg, 173.1 mg or 230.8 mg). Inactive ingredients in the tablet formulation are: lactose monohydrate, microcrystalline cellulose; sodium lauryl sulfate, sodium chloride, hypromellose phthalate, hypromellose, triethyl citrate, anhydrous lactose, crospovidone, stearic acid, magnesium stearate. The tablets also contain opadry 03K29121 clear, which contains: hypromellose and triacetin. Each doxycycline hyclate delayed-release tablets 75 mg tablet contains 4.8 mg (0.208 mEq) of sodium, each doxycycline hyclate delayed-release tablets 100 mg tablet contains 6.4 mg (0.278 mEq) of sodium, each doxycycline hyclate delayed-release tablets 150 mg tablet contains 9.6 mg (0.417 mEq) of sodium, and each doxycycline hyclate delayed-release tablets 200 mg tablet contains 12.8 mg (0.556 mEq) of sodium. USP dissolution test pending."
},
{
"NDCCode": "23155-611-06",
"PackageDescription": "60 TABLET, DELAYED RELEASE in 1 BOTTLE (23155-611-06) ",
"NDC11Code": "23155-0611-06",
"ProductNDC": "23155-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"ProprietaryNameSuffix": "Delayed Release",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180316",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200856",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180316",
"SamplePackage": "N",
"IndicationAndUsage": "Doxycycline hyclate delayed-release tablets are a tetracycline-class drug indicated for: Rickettsial infections (1.1) Sexually transmitted infections (1.2) Respiratory tract infections (1.3) Specific bacterial infections (1.4) Ophthalmic infections (1.5) Anthrax, including inhalational anthrax (post-exposure) (1.6) Alternative treatment for selected infections when penicillin is contraindicated (1.7) Adjunctive therapy in acute intestinal amebiasis and severe acne (1.8) Prophylaxis of malaria (1.9). UsageTo reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate delayed-release tablets, should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.10).",
"Description": "Doxycycline hyclate delayed-release tablets, USP, contain specially coated pellets of doxycycline hyclate, a tetracycline class drug synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration. The structural formula for doxycycline hyclate is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical name for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet contains doxycycline 75 mg, 100 mg, 150 mg or 200 mg (equivalent to doxycycline hyclate 86.6 mg, 115.4 mg, 173.1 mg or 230.8 mg). Inactive ingredients in the tablet formulation are: lactose monohydrate, microcrystalline cellulose; sodium lauryl sulfate, sodium chloride, hypromellose phthalate, hypromellose, triethyl citrate, anhydrous lactose, crospovidone, stearic acid, magnesium stearate. The tablets also contain opadry 03K29121 clear, which contains: hypromellose and triacetin. Each doxycycline hyclate delayed-release tablets 75 mg tablet contains 4.8 mg (0.208 mEq) of sodium, each doxycycline hyclate delayed-release tablets 100 mg tablet contains 6.4 mg (0.278 mEq) of sodium, each doxycycline hyclate delayed-release tablets 150 mg tablet contains 9.6 mg (0.417 mEq) of sodium, and each doxycycline hyclate delayed-release tablets 200 mg tablet contains 12.8 mg (0.556 mEq) of sodium. USP dissolution test pending."
},
{
"NDCCode": "25021-611-10",
"PackageDescription": "10 VIAL in 1 CARTON (25021-611-10) > 10 mL in 1 VIAL",
"NDC11Code": "25021-0611-10",
"ProductNDC": "25021-611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neostigmine Methylsulfate",
"NonProprietaryName": "Neostigmine Methylsulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210652",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "NEOSTIGMINE METHYLSULFATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220115",
"SamplePackage": "N",
"IndicationAndUsage": "Neostigmine methylsulfate injection is a cholinesterase inhibitor indicated for the reversal of the effects of non-depolarizing neuromuscular blocking agents after surgery.",
"Description": "Neostigmine methylsulfate, USP, a cholinesterase inhibitor, is (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. The structural formula is:. Neostigmine methylsulfate, USP is a white crystalline powder and is very soluble in water and soluble in alcohol. Neostigmine Methylsulfate Injection, USP is a sterile, nonpyrogenic solution intended for intravenous use. Each mL of the 0.5 mg per mL strength contains neostigmine methylsulfate, USP 0.5 mg, phenol 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 1 mg per mL strength contains neostigmine methylsulfate, USP 1 mg, phenol 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5."
},
{
"NDCCode": "30142-611-14",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (30142-611-14) > 5 TABLET, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "30142-0611-14",
"ProductNDC": "30142-611",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Fexofenadine Hcl And Pseudoephedrine Hci",
"NonProprietaryName": "Fexofenadine Hcl And Pseudoephedrine Hci",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076667",
"LabelerName": "The Kroger Co.",
"SubstanceName": "FEXOFENADINE HYDROCHLORIDE; PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "60; 120",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2019-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190115",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: . runny nose . sneezing . itchy, watery eyes . itching of the nose or throat. temporarily relives nasal congestion due to the common cold, hay fever or other upper respiratory allergies. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily restores freer breathing through the nose."
},
{
"NDCCode": "33992-0611-0",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (33992-0611-0) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "33992-0611-00",
"ProductNDC": "33992-0611",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Daytime",
"ProprietaryNameSuffix": "Multi-symptom Cold/flu Relief",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hydrobromide, And Phenylephrine Hydrochloride",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20130201",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Greenbrier International",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 10; 5",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "temporarily relieves common cold/flu symptoms: 1 nasal congestion, 2 cough due to minor throat & bronchial irritation, 3 sore throat, 4 headache, 5 minor aches & pains, 6 fever."
},
{
"NDCCode": "37808-611-96",
"PackageDescription": "170 BLISTER PACK in 1 CARTON (37808-611-96) / 1 GUM, CHEWING in 1 BLISTER PACK",
"NDC11Code": "37808-0611-96",
"ProductNDC": "37808-611",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "GUM, CHEWING",
"RouteName": "ORAL",
"StartMarketingDate": "20230731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206393",
"LabelerName": "H E B",
"SubstanceName": "NICOTINE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230731",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49288-0611-4</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0611-4)</PackageDescription>
<NDC11Code>49288-0611-04</NDC11Code>
<ProductNDC>49288-0611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Number Two Weed Mixture</ProprietaryName>
<NonProprietaryName>Number Two Weed Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN</SubstanceName>
<StrengthNumber>.01; .01; .01; .01; .01</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0611-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0611-1)</PackageDescription>
<NDC11Code>49288-0611-01</NDC11Code>
<ProductNDC>49288-0611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Number Two Weed Mixture</ProprietaryName>
<NonProprietaryName>Number Two Weed Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN</SubstanceName>
<StrengthNumber>.01; .01; .01; .01; .01</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0611-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0611-2)</PackageDescription>
<NDC11Code>49288-0611-02</NDC11Code>
<ProductNDC>49288-0611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Number Two Weed Mixture</ProprietaryName>
<NonProprietaryName>Number Two Weed Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN</SubstanceName>
<StrengthNumber>.01; .01; .01; .01; .01</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0611-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0611-3)</PackageDescription>
<NDC11Code>49288-0611-03</NDC11Code>
<ProductNDC>49288-0611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Number Two Weed Mixture</ProprietaryName>
<NonProprietaryName>Number Two Weed Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN</SubstanceName>
<StrengthNumber>.01; .01; .01; .01; .01</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0611-5</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0611-5)</PackageDescription>
<NDC11Code>49288-0611-05</NDC11Code>
<ProductNDC>49288-0611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Number Two Weed Mixture</ProprietaryName>
<NonProprietaryName>Number Two Weed Mixture</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN</SubstanceName>
<StrengthNumber>.01; .01; .01; .01; .01</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>15631-0611-1</NDCCode>
<PackageDescription>4 TABLET in 1 BLISTER PACK (15631-0611-1)</PackageDescription>
<NDC11Code>15631-0611-01</NDC11Code>
<ProductNDC>15631-0611</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kali Muriaticum</ProprietaryName>
<NonProprietaryName>Kali Muriaticum</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151207</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>15631-0611-4</NDCCode>
<PackageDescription>250 TABLET in 1 CONTAINER (15631-0611-4)</PackageDescription>
<NDC11Code>15631-0611-04</NDC11Code>
<ProductNDC>15631-0611</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kali Muriaticum</ProprietaryName>
<NonProprietaryName>Kali Muriaticum</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151207</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>54973-0611-4</NDCCode>
<PackageDescription>250 TABLET in 1 BOTTLE, PLASTIC (54973-0611-4) </PackageDescription>
<NDC11Code>54973-0611-04</NDC11Code>
<ProductNDC>54973-0611</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Chamomilla</ProprietaryName>
<NonProprietaryName>Matricaria Chamomilla Flowering Top Oil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19550101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hyland's</LabelerName>
<SubstanceName>MATRICARIA CHAMOMILLA FLOWERING TOP OIL</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58443-0611-4</NDCCode>
<PackageDescription>237 mL in 1 BOTTLE, SPRAY (58443-0611-4) </PackageDescription>
<NDC11Code>58443-0611-04</NDC11Code>
<ProductNDC>58443-0611</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Australian Gold</ProprietaryName>
<ProprietaryNameSuffix>Broad Spectrum Spf 50 Sunscreen</ProprietaryNameSuffix>
<NonProprietaryName>Octisalate, Avobenzone, Octocrylene, Homosalate</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20171026</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Prime Enterprises Inc.</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>29.7; 99.1; 49.6; 49.6</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-09-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn if used as directed with other sun protection measures (see Directions) decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65044-0611-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL (65044-0611-4) </PackageDescription>
<NDC11Code>65044-0611-04</NDC11Code>
<ProductNDC>65044-0611</ProductNDC>
<ProductTypeName>STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Standardized Grass Pollen, Fescue, Meadow</ProprietaryName>
<NonProprietaryName>Standardized Grass Pollen, Fescue, Meadow</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103874</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>LOLIUM PRATENSE POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Pollen [CS], Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Standardized Grass Pollen Extracts [see Description (11)] are indicated for: 1 Skin testing for diagnosis of patients with a clinical history of allergy to one or more of the following grass pollen allergens: Bermuda, Kentucky Blue (June), Meadow Fescue, Orchard, Perennial Rye, Redtop, Sweet Vernal, or Timothy.7, 8, 9, 10, 2 Immunotherapy for the reduction of grass pollen-induced allergic symptoms confirmed by positive skin test or by in vitro testing for pollen-specific IgE antibodies for Bermuda grass pollen, Kentucky Blue (June) grass pollen, Meadow Fescue grass pollen, Orchard grass pollen, Perennial Rye grass pollen, Redtop grass pollen, Sweet Vernal grass pollen, or Timothy grass pollen.</IndicationAndUsage>
<Description>This prescribing information covers eight Standardized Grass Pollen Extracts. The term 'Standardized Grass Pollen Extracts' as used throughout labeling specifically refers to all eight products listed in the Product Title in Highlights of Prescribing Information. Standardized Grass Pollen Extracts include Standardized Bermuda Grass Pollen (Cynodon dactylon) at 10,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate and 50 % glycerin by volume as a preservative and Standardized Kentucky Blue (June) Grass Pollen (Poa pratensis), Standardized Meadow Fescue Grass Pollen (Festuca elatior), Standardized Orchard Grass Pollen (Dactylis glomerata), Standardized Perennial Rye Grass Pollen (Lolium perenne), Standardized Redtop Grass Pollen (Agrostis alba), Standardized Sweet Vernal Grass Pollen (Anthoxanthum odoratum), and Standardized Timothy Grass Pollen (Phleum pratense) at 100,000 BAU/mL, 0.5 % sodium chloride, 0.275 % sodium bicarbonate, and 50 % glycerin by volume as a preservative. Inactive ingredients include 0.25% sodium chloride for isotonicity and 0.25% sodium bicarbonate as a buffer. Standardized Grass Pollen Extracts are administered percutaneously, intradermally and subcutaneously. Standardized Grass Pollen Extracts are clear light yellow to brownish solutions that are free of particulate matter. Standardized Grass Pollen Extracts are labeled in BAU/milliliter. Bioequivalent Allergy Units are assigned based on comparison by enzyme-linked immunosorbent assay (ELISA) to references from the U.S. Food and Drug Administration, Center for Biologics Evaluation and Research (CBER). CBER references are assigned unitage based on quantitative skin testing.2, 4, 5, 6 CBER references which can be diluted 1:5,000,000 to intradermally elicit a 50 millimeter sum of erythema diameter response in highly puncture reactive subjects are assigned 100,000 BAU/milliliter; whereas references diluted 1:500,000 which elicit the same 50 millimeter sum of erythema diameter response are assigned 10,000 BAU/milliliter.</Description>
</NDC>
<NDC>
<NDCCode>71335-0611-4</NDCCode>
<PackageDescription>28 TABLET, CHEWABLE in 1 BOTTLE (71335-0611-4) </PackageDescription>
<NDC11Code>71335-0611-04</NDC11Code>
<ProductNDC>71335-0611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Montelukast Sodium</ProprietaryName>
<NonProprietaryName>Montelukast Sodium</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120803</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078723</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>MONTELUKAST SODIUM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Leukotriene Receptor Antagonist [EPC],Leukotriene Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>79481-0611-1</NDCCode>
<PackageDescription>4 PATCH in 1 CARTON (79481-0611-1) / 1 g in 1 PATCH</PackageDescription>
<NDC11Code>79481-0611-01</NDC11Code>
<ProductNDC>79481-0611</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Medicated Callus Removers Extra Thick</ProprietaryName>
<NonProprietaryName>Salicylic Acid</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M030</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the removal of calluses. relieves pain by removing calluses.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0135-0611-01</NDCCode>
<PackageDescription>150 TABLET, CHEWABLE in 1 BOTTLE (0135-0611-01) </PackageDescription>
<NDC11Code>00135-0611-01</NDC11Code>
<ProductNDC>0135-0611</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Tums</ProprietaryName>
<ProprietaryNameSuffix>Regular Strength</ProprietaryNameSuffix>
<NonProprietaryName>Calcium Carbonate</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160901</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M001</ApplicationNumber>
<LabelerName>Haleon US Holdings LLC</LabelerName>
<SubstanceName>CALCIUM CARBONATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves: 1 heartburn, 2 acid indigestion, 3 sour stomach, 4 upset stomach associated with these symptoms.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0574-0611-05</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0574-0611-05) / 3.5 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>00574-0611-05</NDC11Code>
<ProductNDC>0574-0611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Podofilox</ProprietaryName>
<NonProprietaryName>Podofilox</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20020129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075600</ApplicationNumber>
<LabelerName>Padagis US LLC</LabelerName>
<SubstanceName>PODOFILOX</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Mitosis [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Podofilox Topical Solution 0.5% is indicated for the topical treatment of external genital warts (Condyloma acuminatum). This product is not indicated in the treatment of perianal or mucous membrane warts (see PRECAUTIONS).</IndicationAndUsage>
<Description>Podofilox Topical Solution is an antimitotic drug which can be chemically synthesized or purified from the plant families Coniferae and Berberidaceae (e.g. species of Juniperus and Podophyllum). Podofilox Topical Solution 0.5% is formulated for topical administration. Each milliliter of solution contains 5 mg of podofilox, in a vehicle containing lactic acid and sodium lactate in alcohol 95%, USP. Podofilox has a molecular weight of 414.4 daltons, and is soluble in alcohol and sparingly soluble in water. Its chemical name is 5,8,8a,9-Tetrahydro-9-hydroxy-5-(3,4,5-trimethoxylphenyl)furo[3',4':6,7] naphtho[2,3,d]-1, 3-dioxol-6(5aH)-one. Podofilox has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>10122-611-10</NDCCode>
<PackageDescription>10 CARTON in 1 CARTON (10122-611-10) / 1 VIAL, SINGLE-USE in 1 CARTON (10122-611-01) / 100 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>10122-0611-10</NDC11Code>
<ProductNDC>10122-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cleviprex</ProprietaryName>
<NonProprietaryName>Clevipidine</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20080915</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022156</ApplicationNumber>
<LabelerName>Chiesi USA, Inc.</LabelerName>
<SubstanceName>CLEVIDIPINE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cleviprex is indicated for the reduction of blood pressure when oral therapy is not feasible or not desirable.</IndicationAndUsage>
<Description>Cleviprex is a sterile, milky-white emulsion containing 0.5 mg/mL of clevidipine suitable for intravenous administration. Clevidipine is a dihydropyridine calcium channel blocker. Chemically, the active substance, clevidipine, is butyroxymethyl methyl 4-(2´,3´-dichlorophenyl)-1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate. It is a racemic mixture with a molecular weight of 456.3 g/mol. Each enantiomer has equipotent antihypertensive activity. The structure and formula are. Clevidipine is practically insoluble in water and is formulated in an oil-in-water emulsion. In addition to the active ingredient, clevidipine, Cleviprex contains soybean oil (200 mg/mL), glycerin (22.5 mg/mL), purified egg yolk phospholipids (12 mg/mL), oleic acid (0.3 mg/mL), disodium edetate (0.05 mg/mL), and sodium hydroxide to adjust pH. Cleviprex has a pH of 6.0 – 8.0 and is a ready-to-use emulsion.</Description>
</NDC>
<NDC>
<NDCCode>10135-611-01</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (10135-611-01) </PackageDescription>
<NDC11Code>10135-0611-01</NDC11Code>
<ProductNDC>10135-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxybutynin Chloride</ProprietaryName>
<NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204010</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC],Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxybutynin chloride extended-release tablets, USP are a muscarinic antagonist indicated for the treatment of overactive bladder with symptoms of urge urinary incontinence, urgency, and frequency. Oxybutynin chloride extended-release tablets, USP are also indicated for the treatment of pediatric patients aged 6 years and older with symptoms of detrusor overactivity associated with a neurological condition (e.g., spina bifida).</IndicationAndUsage>
<Description>Oxybutynin chloride) is an antispasmodic, muscarinic antagonist. Each oxybutynin chloride extended-release tablet, USP contains 5 mg, 10 mg, or 15 mg of oxybutynin chloride USP, formulated as a once-a day controlled-release tablet for oral administration. Oxybutynin chloride, USP is administered as a racemate of R- and S-enantiomers. Chemically, oxybutynin chloride, USP is d,l (racemic) 4-diethylamino-2-butynyl phenylcyclohexylglycolate hydrochloride. The empirical formula of oxybutynin chloride, USP is C22H31NO3 HCl. Its structural formula is. Oxybutynin chloride, USP is a white crystalline solid with a molecular weight of 393.9. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride extended-release tablets, USP also contains the following inert ingredients: hydrogenated vegetable oil, hypromellose, isopropyl alcohol, lactose monohydrate, methacrylic acid copolymer, microcrystalline cellulose, polysorbate 80, sodium lauryl sulfate, talc and triethyl citrate. The 5 mg tablets also contain D&C Red #27 and FD&C Blue #1. The 10mg tablets also contain FD&C Red #40 and FD&C Yellow #6. USP Dissolution Test is pending. System Components and Performance. Oxybutynin chloride extended-release tablet, USP uses a pH-independent hydrophilic matrix and pH dependent enteric coating to deliver oxybutynin chloride, USP at a controlled rate over approximately 24 hours. The oxybutynin chloride extended-release tablet, USP comprises of an inner core made of the drug, rate controlling pH independent polymer and other excipients. The tablet core is then coated with pH dependent enteric coating polymer. When tablets will be exposed to an acidic environment such as the stomach, the drug release will be minimal due to outer enteric coating of the pH dependent polymer. The outer enteric coating upon reaching an environment of pH 5.5 and above will start to dissolve and the polymer in the inner core tablet will hydrate to form a gel layer and the drug releases via diffusion process.</Description>
</NDC>
<NDC>
<NDCCode>13537-611-24</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-611-24) > 4 g in 1 TUBE (13537-611-23)</PackageDescription>
<NDC11Code>13537-0611-24</NDC11Code>
<ProductNDC>13537-611</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esika Hydracolor 2 In 1 Spf 25</ProprietaryName>
<ProprietaryNameSuffix>(rosa Dulzura) - Pink</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Oxybenzone</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151123</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>OCTINOXATE; OXYBENZONE</SubstanceName>
<StrengthNumber>.0664; .0151</StrengthNumber>
<StrengthUnit>g/g; g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13985-611-15</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (13985-611-15) > 15 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>13985-0611-15</NDC11Code>
<ProductNDC>13985-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Proparacaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Proparacaine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20150327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040277</ApplicationNumber>
<LabelerName>MWI</LabelerName>
<SubstanceName>PROPARACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Local Anesthesia [PE], Local Anesthetic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Proparacaine Hydrochloride Ophthalmic Solution is indicated for topical anesthesia in ophthalmic practice. Representative ophthalmic procedures in which the preparation provides good local anesthesia include measurement of intraocular pressure (tonometry), removal of foreign bodies and sutures from the cornea, conjunctival scraping in diagnosis and gonioscopic examination; it is also indicated for use as a topical anesthetic prior to surgical operations such as cataract extraction.</IndicationAndUsage>
<Description>Proparacaine Hydrochloride Ophthalmic Solution USP, 0.5% is a local anesthetic for ophthalmic instillation. Each mL of sterile, aqueous solution contains: Active: Proparacaine Hydrochloride 5 mg (0.5%). Inactives: Glycerin as a stabilizer, Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust pH (3.5 to 6.0), and Water for Injection. Preservative: Benzalkonium Chloride 0.1 mg (0.01%). Proparacaine hydrochloride is designed chemically as 2-(Diethylamino)ethyl 3-amino-4-propoxybenzoate monohydrochloride. The active ingredient is represented by the structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>16714-611-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16714-611-01) </PackageDescription>
<NDC11Code>16714-0611-01</NDC11Code>
<ProductNDC>16714-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077206</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].</IndicationAndUsage>
<Description>Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>16714-611-02</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (16714-611-02) </PackageDescription>
<NDC11Code>16714-0611-02</NDC11Code>
<ProductNDC>16714-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077206</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].</IndicationAndUsage>
<Description>Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>16714-611-03</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (16714-611-03) </PackageDescription>
<NDC11Code>16714-0611-03</NDC11Code>
<ProductNDC>16714-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077206</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].</IndicationAndUsage>
<Description>Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>16714-611-04</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (16714-611-04) </PackageDescription>
<NDC11Code>16714-0611-04</NDC11Code>
<ProductNDC>16714-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077206</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].</IndicationAndUsage>
<Description>Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>16714-611-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (16714-611-05) </PackageDescription>
<NDC11Code>16714-0611-05</NDC11Code>
<ProductNDC>16714-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077206</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].</IndicationAndUsage>
<Description>Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>16714-611-06</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (16714-611-06) </PackageDescription>
<NDC11Code>16714-0611-06</NDC11Code>
<ProductNDC>16714-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077206</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)].</IndicationAndUsage>
<Description>Sertraline hydrochloride tablets USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride USP is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets USP are supplied for oral administration as scored tablets contain 28 mg, 56 mg and 112 mg sertraline hydrochloride USP equivalent to 25 mg, 50 mg, and 100 mg of sertraline and the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, dibasic calcium phosphate dihydrate, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and polysorbate 80. Besides, 25 mg contains D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, FD&C red #40 aluminum lake; 50 mg contains FD&C blue #2 aluminum lake; and 100 mg contains iron oxide yellow. Meets USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>23155-611-04</NDCCode>
<PackageDescription>250 TABLET, DELAYED RELEASE in 1 BOTTLE (23155-611-04) </PackageDescription>
<NDC11Code>23155-0611-04</NDC11Code>
<ProductNDC>23155-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<ProprietaryNameSuffix>Delayed Release</ProprietaryNameSuffix>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180316</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200856</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxycycline hyclate delayed-release tablets are a tetracycline-class drug indicated for: Rickettsial infections (1.1) Sexually transmitted infections (1.2) Respiratory tract infections (1.3) Specific bacterial infections (1.4) Ophthalmic infections (1.5) Anthrax, including inhalational anthrax (post-exposure) (1.6) Alternative treatment for selected infections when penicillin is contraindicated (1.7) Adjunctive therapy in acute intestinal amebiasis and severe acne (1.8) Prophylaxis of malaria (1.9). UsageTo reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate delayed-release tablets, should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.10).</IndicationAndUsage>
<Description>Doxycycline hyclate delayed-release tablets, USP, contain specially coated pellets of doxycycline hyclate, a tetracycline class drug synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration. The structural formula for doxycycline hyclate is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical name for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet contains doxycycline 75 mg, 100 mg, 150 mg or 200 mg (equivalent to doxycycline hyclate 86.6 mg, 115.4 mg, 173.1 mg or 230.8 mg). Inactive ingredients in the tablet formulation are: lactose monohydrate, microcrystalline cellulose; sodium lauryl sulfate, sodium chloride, hypromellose phthalate, hypromellose, triethyl citrate, anhydrous lactose, crospovidone, stearic acid, magnesium stearate. The tablets also contain opadry 03K29121 clear, which contains: hypromellose and triacetin. Each doxycycline hyclate delayed-release tablets 75 mg tablet contains 4.8 mg (0.208 mEq) of sodium, each doxycycline hyclate delayed-release tablets 100 mg tablet contains 6.4 mg (0.278 mEq) of sodium, each doxycycline hyclate delayed-release tablets 150 mg tablet contains 9.6 mg (0.417 mEq) of sodium, and each doxycycline hyclate delayed-release tablets 200 mg tablet contains 12.8 mg (0.556 mEq) of sodium. USP dissolution test pending.</Description>
</NDC>
<NDC>
<NDCCode>23155-611-06</NDCCode>
<PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (23155-611-06) </PackageDescription>
<NDC11Code>23155-0611-06</NDC11Code>
<ProductNDC>23155-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<ProprietaryNameSuffix>Delayed Release</ProprietaryNameSuffix>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180316</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200856</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxycycline hyclate delayed-release tablets are a tetracycline-class drug indicated for: Rickettsial infections (1.1) Sexually transmitted infections (1.2) Respiratory tract infections (1.3) Specific bacterial infections (1.4) Ophthalmic infections (1.5) Anthrax, including inhalational anthrax (post-exposure) (1.6) Alternative treatment for selected infections when penicillin is contraindicated (1.7) Adjunctive therapy in acute intestinal amebiasis and severe acne (1.8) Prophylaxis of malaria (1.9). UsageTo reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate delayed-release tablets, should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.10).</IndicationAndUsage>
<Description>Doxycycline hyclate delayed-release tablets, USP, contain specially coated pellets of doxycycline hyclate, a tetracycline class drug synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration. The structural formula for doxycycline hyclate is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical name for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet contains doxycycline 75 mg, 100 mg, 150 mg or 200 mg (equivalent to doxycycline hyclate 86.6 mg, 115.4 mg, 173.1 mg or 230.8 mg). Inactive ingredients in the tablet formulation are: lactose monohydrate, microcrystalline cellulose; sodium lauryl sulfate, sodium chloride, hypromellose phthalate, hypromellose, triethyl citrate, anhydrous lactose, crospovidone, stearic acid, magnesium stearate. The tablets also contain opadry 03K29121 clear, which contains: hypromellose and triacetin. Each doxycycline hyclate delayed-release tablets 75 mg tablet contains 4.8 mg (0.208 mEq) of sodium, each doxycycline hyclate delayed-release tablets 100 mg tablet contains 6.4 mg (0.278 mEq) of sodium, each doxycycline hyclate delayed-release tablets 150 mg tablet contains 9.6 mg (0.417 mEq) of sodium, and each doxycycline hyclate delayed-release tablets 200 mg tablet contains 12.8 mg (0.556 mEq) of sodium. USP dissolution test pending.</Description>
</NDC>
<NDC>
<NDCCode>25021-611-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (25021-611-10) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0611-10</NDC11Code>
<ProductNDC>25021-611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neostigmine Methylsulfate</ProprietaryName>
<NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210652</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Neostigmine methylsulfate injection is a cholinesterase inhibitor indicated for the reversal of the effects of non-depolarizing neuromuscular blocking agents after surgery.</IndicationAndUsage>
<Description>Neostigmine methylsulfate, USP, a cholinesterase inhibitor, is (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. The structural formula is:. Neostigmine methylsulfate, USP is a white crystalline powder and is very soluble in water and soluble in alcohol. Neostigmine Methylsulfate Injection, USP is a sterile, nonpyrogenic solution intended for intravenous use. Each mL of the 0.5 mg per mL strength contains neostigmine methylsulfate, USP 0.5 mg, phenol 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 1 mg per mL strength contains neostigmine methylsulfate, USP 1 mg, phenol 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5.</Description>
</NDC>
<NDC>
<NDCCode>30142-611-14</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (30142-611-14) > 5 TABLET, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>30142-0611-14</NDC11Code>
<ProductNDC>30142-611</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Fexofenadine Hcl And Pseudoephedrine Hci</ProprietaryName>
<NonProprietaryName>Fexofenadine Hcl And Pseudoephedrine Hci</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076667</ApplicationNumber>
<LabelerName>The Kroger Co.</LabelerName>
<SubstanceName>FEXOFENADINE HYDROCHLORIDE; PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60; 120</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: . runny nose . sneezing . itchy, watery eyes . itching of the nose or throat. temporarily relives nasal congestion due to the common cold, hay fever or other upper respiratory allergies. reduces swelling of nasal passages. temporarily relieves sinus congestion and pressure. temporarily restores freer breathing through the nose.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>33992-0611-0</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (33992-0611-0) > 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>33992-0611-00</NDC11Code>
<ProductNDC>33992-0611</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Daytime</ProprietaryName>
<ProprietaryNameSuffix>Multi-symptom Cold/flu Relief</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide, And Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Greenbrier International</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 10; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>temporarily relieves common cold/flu symptoms: 1 nasal congestion, 2 cough due to minor throat & bronchial irritation, 3 sore throat, 4 headache, 5 minor aches & pains, 6 fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37808-611-96</NDCCode>
<PackageDescription>170 BLISTER PACK in 1 CARTON (37808-611-96) / 1 GUM, CHEWING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>37808-0611-96</NDC11Code>
<ProductNDC>37808-611</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>GUM, CHEWING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206393</ApplicationNumber>
<LabelerName>H E B</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
</NDCList>