RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>49288-0636-2</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0636-2)</PackageDescription>
    <NDC11Code>49288-0636-02</NDC11Code>
    <ProductNDC>49288-0636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paper Mulberry</ProprietaryName>
    <NonProprietaryName>Paper Mulberry</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>BROUSSONETIA PAPYRIFERA POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0636-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0636-5)</PackageDescription>
    <NDC11Code>49288-0636-05</NDC11Code>
    <ProductNDC>49288-0636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paper Mulberry</ProprietaryName>
    <NonProprietaryName>Paper Mulberry</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>BROUSSONETIA PAPYRIFERA POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0636-1</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0636-1)</PackageDescription>
    <NDC11Code>49288-0636-01</NDC11Code>
    <ProductNDC>49288-0636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paper Mulberry</ProprietaryName>
    <NonProprietaryName>Paper Mulberry</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>BROUSSONETIA PAPYRIFERA POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0636-3</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0636-3)</PackageDescription>
    <NDC11Code>49288-0636-03</NDC11Code>
    <ProductNDC>49288-0636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paper Mulberry</ProprietaryName>
    <NonProprietaryName>Paper Mulberry</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>BROUSSONETIA PAPYRIFERA POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0636-4</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0636-4)</PackageDescription>
    <NDC11Code>49288-0636-04</NDC11Code>
    <ProductNDC>49288-0636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paper Mulberry</ProprietaryName>
    <NonProprietaryName>Paper Mulberry</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>BROUSSONETIA PAPYRIFERA POLLEN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>15631-0636-5</NDCCode>
    <PackageDescription>500 TABLET in 1 CONTAINER (15631-0636-5)</PackageDescription>
    <NDC11Code>15631-0636-05</NDC11Code>
    <ProductNDC>15631-0636</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Mezereum</ProprietaryName>
    <NonProprietaryName>Mezereum</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151226</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
    <SubstanceName>DAPHNE MEZEREUM BARK</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>[hp_X]/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>69968-0636-5</NDCCode>
    <PackageDescription>500 mL in 1 BOTTLE, PLASTIC (69968-0636-5) </PackageDescription>
    <NDC11Code>69968-0636-05</NDC11Code>
    <ProductNDC>69968-0636</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Hand Sanitizer</ProprietaryName>
    <NonProprietaryName>Alcohol</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200325</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part333A</ApplicationNumber>
    <LabelerName>Johnson &amp; Johnson Consumer Inc.</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>70</StrengthNumber>
    <StrengthUnit>mL/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-04-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200326</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71335-0636-5</NDCCode>
    <PackageDescription>28 TABLET, DELAYED RELEASE in 1 BOTTLE (71335-0636-5) </PackageDescription>
    <NDC11Code>71335-0636-05</NDC11Code>
    <ProductNDC>71335-0636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rabeprazole Sodium</ProprietaryName>
    <NonProprietaryName>Rabeprazole Sodium</NonProprietaryName>
    <DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204237</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>RABEPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-10-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180131</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>75916-0636-1</NDCCode>
    <PackageDescription>1 TUBE, WITH APPLICATOR in 1 BOX (75916-0636-1)  &gt; 8.5 g in 1 TUBE, WITH APPLICATOR</PackageDescription>
    <NDC11Code>75916-0636-01</NDC11Code>
    <ProductNDC>75916-0636</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Surfersskin Sunscreen Zinc</ProprietaryName>
    <NonProprietaryName>Octinoxate, Titanium Dioxide, Zinc Oxide</NonProprietaryName>
    <DosageFormName>STICK</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20110127</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>Skin Alive, Ltd.</LabelerName>
    <SubstanceName>OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
    <StrengthNumber>7.5; 2.35; 4.2</StrengthNumber>
    <StrengthUnit>g/100g; g/100g; g/100g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Uses. Helps prevent sunburn. Higher SPF gives more sunburn protection. Provides high protection against sunburn. Regains SPF after 80 minutes of sweating.</IndicationAndUsage>
    <Description>SurfersSkin SPF 30+ Sunscreen Zinc gives great protection especially in the snow. Apply liberally to face, nose and lips. To report a serious adverse event, contact 1-800-332-1088. Expires. Lot Number. ww.snowskin.co. DIST. BY Quiver Dist, Bend Oregon, USA 97701. Tested on Snowboarders - Not animals. AS/ANZ STANDARD 2604-1998. Net Wt. 0.30oz (8.5g).</Description>
  </NDC>
  <NDC>
    <NDCCode>10135-636-32</NDCCode>
    <PackageDescription>180 TABLET, DELAYED RELEASE in 1 BOTTLE (10135-636-32) </PackageDescription>
    <NDC11Code>10135-0636-32</NDC11Code>
    <ProductNDC>10135-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acamprosate Calcium</ProprietaryName>
    <NonProprietaryName>Acamprosate Calcium</NonProprietaryName>
    <DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202229</ApplicationNumber>
    <LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
    <SubstanceName>ACAMPROSATE CALCIUM</SubstanceName>
    <StrengthNumber>333</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2021-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Acamprosate calcium delayed-release tablets are indicated for the maintenance of abstinence from alcohol in patients with alcohol dependence who are abstinent at treatment initiation. Treatment with acamprosate calcium delayed-release tablets should be part of a comprehensive management program that includes psychosocial support. The efficacy of acamprosate calcium delayed-release tablets in promoting abstinence has not been demonstrated in subjects who have not undergone detoxification and not achieved alcohol abstinence prior to beginning acamprosate calcium delayed-release tablets treatment. The efficacy of acamprosate calcium delayed-release tablets in promoting abstinence from alcohol in polysubstance abusers has not been adequately assessed.</IndicationAndUsage>
    <Description>Acamprosate calcium delayed-release tablets are supplied as an enteric-coated tablet for oral administration. Acamprosate calcium is a synthetic compound with a chemical structure similar to that of the endogenous amino acid homotaurine, which is a structural analogue of the amino acid neurotransmitter γ-aminobutyric acid and the amino acid neuromodulator taurine. Its chemical name is calcium bis [3-(acetylamino) propane-1-sulfonate]. Its chemical formula is C10H20CaN2O8S2 and molecular weight is 400.5. Its structural formula is. Acamprosate calcium is a white to almost white powder, odorless or nearly odorless powder. It is freely soluble in water and practically insoluble in alcohol and methylene chloride. Each acamprosate calcium delayed-release tablet contains acamprosate calcium 333 mg, equivalent to 300 mg of acamprosate. Inactive ingredients in acamprosate calcium delayed-release tablets include: colloidal silicon dioxide, crospovidone, methacrylic acid copolymer dispersion, magnesium silicate, magnesium stearate, microcrystalline cellulose, polyvinyl pyrollidone, propylene glycol, sodium starch glycolate, and talc. Sulfites were used in the synthesis of the drug substance and traces of residual sulfites may be present in the drug product.</Description>
  </NDC>
  <NDC>
    <NDCCode>11673-636-70</NDCCode>
    <PackageDescription>70 VIAL in 1 CARTON (11673-636-70)  &gt; .4 mL in 1 VIAL</PackageDescription>
    <NDC11Code>11673-0636-70</NDC11Code>
    <ProductNDC>11673-636</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Up And Up Lubricant Refreshing</ProprietaryName>
    <NonProprietaryName>Carboxymethylcellulose Sodium</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20180419</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part349</ApplicationNumber>
    <LabelerName>Target Corporation</LabelerName>
    <SubstanceName>CARBOXYMETHYLCELLULOSE SODIUM</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180419</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Directions: 1 to open, twist and pull tab to remove, 2 instill 1 or 2 drops in the affected eye(s) as needed, 3 children under 6 years of age: ask a doctor.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>13533-636-01</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (13533-636-01)  / 1 mL in 1 VIAL, GLASS (13533-636-10) </PackageDescription>
    <NDC11Code>13533-0636-01</NDC11Code>
    <ProductNDC>13533-636</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hyperhep B</ProprietaryName>
    <NonProprietaryName>Hepatitis B Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>19961009</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101146</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>220</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19961009</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Recommendations on post-exposure prophylaxis are based on available efficacy data and on the likelihood of future HBV exposure for the person requiring treatment. In all exposures, a regimen combining Hepatitis B Immune Globulin (Human) with hepatitis B vaccine will provide both short- and long-term protection, will be less costly than the two-dose Hepatitis B Immune Globulin (Human) treatment alone, and is the treatment of choice.(9). HyperHEP B is indicated for post-exposure prophylaxis in the following situations.</IndicationAndUsage>
    <Description>Hepatitis B Immune Globulin (Human) — HyperHEP B® is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human hepatitis B immune globulin for intramuscular administration. HyperHEP B contains no preservative. HyperHEP B is prepared from pools of human plasma collected from healthy donors by a combination of  cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion exchange chromatography, nanofiltration and low pH incubation. HyperHEP B consists of a 15% to 18% protein solution at a pH of 4.1 to 4.8 in 0.16 M to 0.26 M glycine. The product contains anti-HBs antibody equivalent to or exceeding the potency of anti-HBs in a U.S. reference hepatitis B immune globulin (Center for Biologics Evaluation and Research, FDA). The U.S. reference has been tested against the World Health Organization standard Hepatitis B Immune Globulin and found to be equal to 220 international units (IU) per mL. When medicinal biological products are administered, the risk of infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products  prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogen. In the manufacturing process of HyperHEP B, there are several steps with the capacity for viral inactivation or removal.(1) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-636-02</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CARTON (13533-636-02)  / 1 mL in 1 SYRINGE, GLASS (13533-636-20) </PackageDescription>
    <NDC11Code>13533-0636-02</NDC11Code>
    <ProductNDC>13533-636</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hyperhep B</ProprietaryName>
    <NonProprietaryName>Hepatitis B Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>19961009</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101146</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>220</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19961009</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Recommendations on post-exposure prophylaxis are based on available efficacy data and on the likelihood of future HBV exposure for the person requiring treatment. In all exposures, a regimen combining Hepatitis B Immune Globulin (Human) with hepatitis B vaccine will provide both short- and long-term protection, will be less costly than the two-dose Hepatitis B Immune Globulin (Human) treatment alone, and is the treatment of choice.(9). HyperHEP B is indicated for post-exposure prophylaxis in the following situations.</IndicationAndUsage>
    <Description>Hepatitis B Immune Globulin (Human) — HyperHEP B® is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human hepatitis B immune globulin for intramuscular administration. HyperHEP B contains no preservative. HyperHEP B is prepared from pools of human plasma collected from healthy donors by a combination of  cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion exchange chromatography, nanofiltration and low pH incubation. HyperHEP B consists of a 15% to 18% protein solution at a pH of 4.1 to 4.8 in 0.16 M to 0.26 M glycine. The product contains anti-HBs antibody equivalent to or exceeding the potency of anti-HBs in a U.S. reference hepatitis B immune globulin (Center for Biologics Evaluation and Research, FDA). The U.S. reference has been tested against the World Health Organization standard Hepatitis B Immune Globulin and found to be equal to 220 international units (IU) per mL. When medicinal biological products are administered, the risk of infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products  prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogen. In the manufacturing process of HyperHEP B, there are several steps with the capacity for viral inactivation or removal.(1) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-636-03</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CARTON (13533-636-03)  / .5 mL in 1 SYRINGE, GLASS (13533-636-30) </PackageDescription>
    <NDC11Code>13533-0636-03</NDC11Code>
    <ProductNDC>13533-636</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hyperhep B</ProprietaryName>
    <NonProprietaryName>Hepatitis B Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>19961009</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101146</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>220</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19961009</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Recommendations on post-exposure prophylaxis are based on available efficacy data and on the likelihood of future HBV exposure for the person requiring treatment. In all exposures, a regimen combining Hepatitis B Immune Globulin (Human) with hepatitis B vaccine will provide both short- and long-term protection, will be less costly than the two-dose Hepatitis B Immune Globulin (Human) treatment alone, and is the treatment of choice.(9). HyperHEP B is indicated for post-exposure prophylaxis in the following situations.</IndicationAndUsage>
    <Description>Hepatitis B Immune Globulin (Human) — HyperHEP B® is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human hepatitis B immune globulin for intramuscular administration. HyperHEP B contains no preservative. HyperHEP B is prepared from pools of human plasma collected from healthy donors by a combination of  cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion exchange chromatography, nanofiltration and low pH incubation. HyperHEP B consists of a 15% to 18% protein solution at a pH of 4.1 to 4.8 in 0.16 M to 0.26 M glycine. The product contains anti-HBs antibody equivalent to or exceeding the potency of anti-HBs in a U.S. reference hepatitis B immune globulin (Center for Biologics Evaluation and Research, FDA). The U.S. reference has been tested against the World Health Organization standard Hepatitis B Immune Globulin and found to be equal to 220 international units (IU) per mL. When medicinal biological products are administered, the risk of infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products  prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogen. In the manufacturing process of HyperHEP B, there are several steps with the capacity for viral inactivation or removal.(1) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
  </NDC>
  <NDC>
    <NDCCode>13533-636-05</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (13533-636-05)  / 5 mL in 1 VIAL, GLASS (13533-636-50) </PackageDescription>
    <NDC11Code>13533-0636-05</NDC11Code>
    <ProductNDC>13533-636</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Hyperhep B</ProprietaryName>
    <NonProprietaryName>Hepatitis B Immune Globulin (human)</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>19961009</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101146</ApplicationNumber>
    <LabelerName>GRIFOLS USA, LLC</LabelerName>
    <SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>220</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19961009</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Recommendations on post-exposure prophylaxis are based on available efficacy data and on the likelihood of future HBV exposure for the person requiring treatment. In all exposures, a regimen combining Hepatitis B Immune Globulin (Human) with hepatitis B vaccine will provide both short- and long-term protection, will be less costly than the two-dose Hepatitis B Immune Globulin (Human) treatment alone, and is the treatment of choice.(9). HyperHEP B is indicated for post-exposure prophylaxis in the following situations.</IndicationAndUsage>
    <Description>Hepatitis B Immune Globulin (Human) — HyperHEP B® is a clear or slightly opalescent, and colorless or pale yellow sterile solution of human hepatitis B immune globulin for intramuscular administration. HyperHEP B contains no preservative. HyperHEP B is prepared from pools of human plasma collected from healthy donors by a combination of  cold ethanol fractionation, caprylate precipitation and filtration, caprylate incubation, anion exchange chromatography, nanofiltration and low pH incubation. HyperHEP B consists of a 15% to 18% protein solution at a pH of 4.1 to 4.8 in 0.16 M to 0.26 M glycine. The product contains anti-HBs antibody equivalent to or exceeding the potency of anti-HBs in a U.S. reference hepatitis B immune globulin (Center for Biologics Evaluation and Research, FDA). The U.S. reference has been tested against the World Health Organization standard Hepatitis B Immune Globulin and found to be equal to 220 international units (IU) per mL. When medicinal biological products are administered, the risk of infectious diseases due to transmission of pathogens cannot be totally excluded. However, in the case of products  prepared from human plasma, the risk of transmission of pathogens is reduced by epidemiological surveillance of the donor population and selection of individual donors by medical interview; testing of individual donations and plasma pools; and the presence in the manufacturing processes of steps with demonstrated capacity to inactivate/remove pathogen. In the manufacturing process of HyperHEP B, there are several steps with the capacity for viral inactivation or removal.(1) The main steps of the manufacturing process that contribute to the virus clearance capacity are as follows: 1 Caprylate precipitation/depth filtration, 2 Caprylate incubation, 3 Depth filtration, 4 Column chromatography, 5 Nanofiltration, 6 Low pH final container incubation.</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-636-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (13668-636-05) </PackageDescription>
    <NDC11Code>13668-0636-05</NDC11Code>
    <ProductNDC>13668-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250716</StartMarketingDate>
    <EndMarketingDate>20261231</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213604</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>97; 103</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20250716</StartMarketingDatePackage>
    <EndMarketingDatePackage>20261231</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
    <Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-636-33</NDCCode>
    <PackageDescription>180 TABLET in 1 BOTTLE (13668-636-33) </PackageDescription>
    <NDC11Code>13668-0636-33</NDC11Code>
    <ProductNDC>13668-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250716</StartMarketingDate>
    <EndMarketingDate>20261231</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213604</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>97; 103</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20250716</StartMarketingDatePackage>
    <EndMarketingDatePackage>20261231</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
    <Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-636-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (13668-636-60) </PackageDescription>
    <NDC11Code>13668-0636-60</NDC11Code>
    <ProductNDC>13668-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250716</StartMarketingDate>
    <EndMarketingDate>20261231</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213604</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>97; 103</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20250716</StartMarketingDatePackage>
    <EndMarketingDatePackage>20261231</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
    <Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-636-74</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 CARTON (13668-636-74)  / 10 TABLET in 1 BLISTER PACK (13668-636-71) </PackageDescription>
    <NDC11Code>13668-0636-74</NDC11Code>
    <ProductNDC>13668-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250716</StartMarketingDate>
    <EndMarketingDate>20261231</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213604</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>97; 103</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20250716</StartMarketingDatePackage>
    <EndMarketingDatePackage>20261231</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
    <Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
  </NDC>
  <NDC>
    <NDCCode>16590-636-62</NDCCode>
    <PackageDescription>84 TABLET in 1 BOTTLE (16590-636-62)</PackageDescription>
    <NDC11Code>16590-0636-62</NDC11Code>
    <ProductNDC>16590-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lortab</ProprietaryName>
    <NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19890825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA089699</ApplicationNumber>
    <LabelerName>STAT RX USA LLC</LabelerName>
    <SubstanceName>HYDROCODONE BITARTRATE; ACETAMINOPHEN</SubstanceName>
    <StrengthNumber>7.5; 500</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA]</Pharm_Classes>
    <DEASchedule>CIII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2018-02-07</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>LORTAB 7.5/500 tablets (hydrocodone bitartrate and acetaminophen tablets, USP, 7.5 mg/500 mg) are indicated for the relief of moderate to moderately severe pain.</IndicationAndUsage>
    <Description>Hydrocodone bitartrate and acetaminophen is supplied in tablet form for oral administration. WARNING: May be habit forming (see PRECAUTIONS, Information for Patients, and DRUG ABUSE AND DEPENDENCE). Hydrocodone bitartrate is an opioid analgesic and antitussive and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4’-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each LORTAB 7.5/500 tablet contains. Hydrocodone Bitartrate…………………………………… 7.5 mg. Acetaminophen…………………………………………… 500 mg. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, crospovidone, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid and sugar spheres which are composed of starch derived from corn, sucrose, FD and C Blue #1 and D and C Yellow #10. Meets USP dissolution test 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>16714-636-01</NDCCode>
    <PackageDescription>120 CAPSULE in 1 BOTTLE (16714-636-01) </PackageDescription>
    <NDC11Code>16714-0636-01</NDC11Code>
    <ProductNDC>16714-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Icosapent Ethyl</ProprietaryName>
    <NonProprietaryName>Icosapent Ethyl</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216811</ApplicationNumber>
    <LabelerName>Northstar Rx LLC</LabelerName>
    <SubstanceName>ICOSAPENT ETHYL</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Icosapent ethyl capsules are indicated: 1 as an adjunct to diet to reduce triglyceride (TG) levels in adult patients with severe (≥ 500 mg/dL) hypertriglyceridemia.</IndicationAndUsage>
    <Description>Icosapent ethyl capsules, a lipid-regulating agent, is supplied as 1 gram liquid-filled clear, transparent soft gelatin capsules containing clear to light yellow colored solution for oral use. Each icosapent ethyl capsule contains 1 gram of icosapent ethyl (in a 1 gram capsule). Icosapent ethyl is an ethyl ester of the omega-3 fatty acid eicosapentaenoic acid (EPA). The empirical formula of icosapent ethyl is C22H34O2 and the molecular weight is 330.50. The chemical name for icosapent ethyl is ethyl all-cis-5,8,11,14,17-icosapentaenoate with the following chemical structure. Icosapent ethyl capsules also contain the following inactive ingredients: bloom gelatin, glycerin, alpha tocopherol, medium chain triglycerides, and lecithin. The capsules are imprinted with white imprinting ink containing titanium dioxide, propylene glycol, and hypromellose 2910.</Description>
  </NDC>
  <NDC>
    <NDCCode>21695-636-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (21695-636-60)</PackageDescription>
    <NDC11Code>21695-0636-60</NDC11Code>
    <ProductNDC>21695-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nitroglycerin Slocaps</ProprietaryName>
    <NonProprietaryName>Nitroglycerin Sustained-release Capsules</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19820825</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Rebel Distributors Corp</LabelerName>
    <SubstanceName>NITROGLYCERIN</SubstanceName>
    <StrengthNumber>6.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Nitroglycerin Slocaps® (Nitroglycerin) are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
    <Description>Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. Each NITROGLYCERIN SLOCAP®, for oral administration, contains 2.5 mg, 6.5 mg, or 9 mg of nitroglycerin. Each capsule also contains the following inactive ingredients: gelatin, lactose, pharmaceutical glaze, corn starch, sucrose, talc and other ingredients. In addition, the 2.5 mg capsule contains FD&amp;C Blue #1, FD&amp;C Red #3 and D&amp;C Yellow #10; the 6.5 mg capsule contains FD&amp;C Blue #1, D&amp;C Red #33, FD&amp;C Yellow #6, and D&amp;C Yellow #10; and the 9 mg capsule contains FD&amp;C Green #3, FD&amp;C Yellow #6, D&amp;C Yellow #10 and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>30142-636-73</NDCCode>
    <PackageDescription>8 BLISTER PACK in 1 CARTON (30142-636-73)  &gt; 2 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>30142-0636-73</NDC11Code>
    <ProductNDC>30142-636</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Fast Cold And Flu Relief</ProprietaryName>
    <NonProprietaryName>Acetaminophen, Dextromethorphan Hbr, Phenylephrine Hcl</NonProprietaryName>
    <DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170622</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>Kroger Company</LabelerName>
    <SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>325; 10; 5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-12-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170622</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>31722-636-30</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BOTTLE (31722-636-30) </PackageDescription>
    <NDC11Code>31722-0636-30</NDC11Code>
    <ProductNDC>31722-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Silodosin</ProprietaryName>
    <NonProprietaryName>Silodosin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200214</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204793</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>SILODOSIN</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Silodosin capsules, a selective alpha-1 adrenergic receptor antagonist, is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES ( 14)]. Silodosin capsules are not indicated for the treatment of hypertension.</IndicationAndUsage>
    <Description>Silodosin is a selective antagonist of alpha-1 adrenoreceptors. The chemical name of Silodosin is 2,3-Dihydro-1-(3-hydroxy-propyl)-5-[(2R)-2-[[2-[2-(2,2,2-trifluoroethoxy) phenoxy] ethyl]amino]-propyl]-1H-indole-7-carboxamide and the molecular formula is C 25H 32F 3N 3O 4with a molecular weight of 495.55. The structural formula of silodosin is:. Silodosin is a white to pale yellowish white powder. It is sparingly soluble in methanol. Each silodosin capsule for oral administration contains 4 mg or 8 mg of silodosin, and the following inactive ingredients: gelatin, pregelatinized starch, sodium stearyl fumarate, sorbitol and titanium dioxide. The imprinting ink containing black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-636-31</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BOTTLE (31722-636-31) </PackageDescription>
    <NDC11Code>31722-0636-31</NDC11Code>
    <ProductNDC>31722-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Silodosin</ProprietaryName>
    <NonProprietaryName>Silodosin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200214</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204793</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>SILODOSIN</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Silodosin capsules, a selective alpha-1 adrenergic receptor antagonist, is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES ( 14)]. Silodosin capsules are not indicated for the treatment of hypertension.</IndicationAndUsage>
    <Description>Silodosin is a selective antagonist of alpha-1 adrenoreceptors. The chemical name of Silodosin is 2,3-Dihydro-1-(3-hydroxy-propyl)-5-[(2R)-2-[[2-[2-(2,2,2-trifluoroethoxy) phenoxy] ethyl]amino]-propyl]-1H-indole-7-carboxamide and the molecular formula is C 25H 32F 3N 3O 4with a molecular weight of 495.55. The structural formula of silodosin is:. Silodosin is a white to pale yellowish white powder. It is sparingly soluble in methanol. Each silodosin capsule for oral administration contains 4 mg or 8 mg of silodosin, and the following inactive ingredients: gelatin, pregelatinized starch, sodium stearyl fumarate, sorbitol and titanium dioxide. The imprinting ink containing black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-636-90</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE (31722-636-90) </PackageDescription>
    <NDC11Code>31722-0636-90</NDC11Code>
    <ProductNDC>31722-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Silodosin</ProprietaryName>
    <NonProprietaryName>Silodosin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200214</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204793</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>SILODOSIN</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Silodosin capsules, a selective alpha-1 adrenergic receptor antagonist, is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES ( 14)]. Silodosin capsules are not indicated for the treatment of hypertension.</IndicationAndUsage>
    <Description>Silodosin is a selective antagonist of alpha-1 adrenoreceptors. The chemical name of Silodosin is 2,3-Dihydro-1-(3-hydroxy-propyl)-5-[(2R)-2-[[2-[2-(2,2,2-trifluoroethoxy) phenoxy] ethyl]amino]-propyl]-1H-indole-7-carboxamide and the molecular formula is C 25H 32F 3N 3O 4with a molecular weight of 495.55. The structural formula of silodosin is:. Silodosin is a white to pale yellowish white powder. It is sparingly soluble in methanol. Each silodosin capsule for oral administration contains 4 mg or 8 mg of silodosin, and the following inactive ingredients: gelatin, pregelatinized starch, sodium stearyl fumarate, sorbitol and titanium dioxide. The imprinting ink containing black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-636-91</NDCCode>
    <PackageDescription>90 CAPSULE in 1 BOTTLE (31722-636-91) </PackageDescription>
    <NDC11Code>31722-0636-91</NDC11Code>
    <ProductNDC>31722-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Silodosin</ProprietaryName>
    <NonProprietaryName>Silodosin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200214</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204793</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>SILODOSIN</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Silodosin capsules, a selective alpha-1 adrenergic receptor antagonist, is indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see CLINICAL STUDIES ( 14)]. Silodosin capsules are not indicated for the treatment of hypertension.</IndicationAndUsage>
    <Description>Silodosin is a selective antagonist of alpha-1 adrenoreceptors. The chemical name of Silodosin is 2,3-Dihydro-1-(3-hydroxy-propyl)-5-[(2R)-2-[[2-[2-(2,2,2-trifluoroethoxy) phenoxy] ethyl]amino]-propyl]-1H-indole-7-carboxamide and the molecular formula is C 25H 32F 3N 3O 4with a molecular weight of 495.55. The structural formula of silodosin is:. Silodosin is a white to pale yellowish white powder. It is sparingly soluble in methanol. Each silodosin capsule for oral administration contains 4 mg or 8 mg of silodosin, and the following inactive ingredients: gelatin, pregelatinized starch, sodium stearyl fumarate, sorbitol and titanium dioxide. The imprinting ink containing black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>35356-636-05</NDCCode>
    <PackageDescription>5 POUCH in 1 CARTON (35356-636-05)  &gt; 1 PATCH in 1 POUCH &gt; 72 h in 1 PATCH</PackageDescription>
    <NDC11Code>35356-0636-05</NDC11Code>
    <ProductNDC>35356-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fentanyl Transdermal System</ProprietaryName>
    <NonProprietaryName>Fentanyl Transdermal System</NonProprietaryName>
    <DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20110606</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077154</ApplicationNumber>
    <LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
    <SubstanceName>FENTANYL</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>ug/h</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2018-12-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110606</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>41250-636-30</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (41250-636-30)  / 89 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>41250-0636-30</NDC11Code>
    <ProductNDC>41250-636</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Meijer Saline</ProprietaryName>
    <NonProprietaryName>Nasal</NonProprietaryName>
    <DosageFormName>SPRAY</DosageFormName>
    <RouteName>NASAL</RouteName>
    <StartMarketingDate>20210217</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M022</ApplicationNumber>
    <LabelerName>MEIJER</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>6.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-10-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>provides instant, soothing relief to dry irritated nasal passages due to colds, allergies, dry air, pollution, smoke, air travel and use of decongestants/steroidal sprays.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>43598-636-10</NDCCode>
    <PackageDescription>10 BAG in 1 CARTON (43598-636-10)  &gt; 100 mL in 1 BAG (43598-636-52) </PackageDescription>
    <NDC11Code>43598-0636-10</NDC11Code>
    <ProductNDC>43598-636</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levetiracetam</ProprietaryName>
    <NonProprietaryName>Levetiracetam Injection</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180608</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206880</ApplicationNumber>
    <LabelerName>Dr.Reddy's Laboratories Inc</LabelerName>
    <SubstanceName>LEVETIRACETAM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-07-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180608</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levetiracetam in Sodium Chloride Injection is an antiepileptic drug indicated for adult patients (16 years and older) when oral administration is temporarily not feasible.</IndicationAndUsage>
    <Description>Levetiracetam in Sodium Chloride Injection is an antiepileptic drug available as a clear, colorless, sterile solution for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam in Sodium Chloride Injection is a clear, colorless, sterile solution that is available in a single-dose dual port bag with an aluminum overwrap. The container closure is not made with natural rubber latex. 500 mg/100 mL: One 100 mL bag contains 500 mg of levetiracetam (5 mg/mL), water for injection, 820 mg sodium chloride, 5.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,000 mg/100 mL: One 100 mL bag contains 1,000 mg of levetiracetam (10 mg/mL), water for injection, 750 mg sodium chloride, 6.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate. 1,500 mg/100 mL: One 100 mL bag contains 1,500 mg of levetiracetam (15 mg/mL), water for injection, 540 mg sodium chloride, 7.5 mg of glacial acetic acid and buffered at approximately pH 5.5 with glacial acetic acid and 164 mg sodium acetate trihydrate.</Description>
  </NDC>
</NDCList>