{
"NDC": [
{
"NDCCode": "49502-806-93",
"PackageDescription": "30 POUCH in 1 CARTON (49502-806-93) / 1 VIAL, SINGLE-DOSE in 1 POUCH (49502-806-32) / 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "49502-0806-93",
"ProductNDC": "49502-806",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Yupelri",
"NonProprietaryName": "Revefenacin",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181203",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210598",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "REVEFENACIN",
"StrengthNumber": "175",
"StrengthUnit": "ug/3mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181203",
"SamplePackage": "N",
"IndicationAndUsage": "YUPELRI is indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD).",
"Description": "YUPELRI is a sterile, clear, colorless, aqueous solution of revefenacin. Revefenacin, the active component of YUPELRI, is an anticholinergic. The chemical name for revefenacin is 1-(2-{4-[(4-carbamoylpiperidin-1-yl)methyl]-N-methylbenzamido}ethyl)piperidin-4-yl N-({1,1’-biphenyl}-2-yl)carbamate; its structural formula is. Revefenacin has a molecular weight of 597.76 and its empirical formula is C35H43N5O4. Revefenacin is a white to off-white crystalline powder and is slightly soluble in water. YUPELRI is supplied as 3 mL of revefenacin solution packaged in a unit-dose low-density polyethylene vial overwrapped in a foil pouch. Each vial contains 175 mcg of revefenacin in 3 mL of an isotonic, sterile aqueous solution containing citric acid, sodium chloride, sodium citrate, and water for injection at pH 5.0. Hydrochloric acid or sodium hydroxide may be used to adjust the pH. YUPELRI does not require dilution prior to administration by nebulization. Like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the nebulization system used, and compressor performance. Using the PARI LC® Sprint nebulizer connected to a PARI Trek® S compressor under in vitro conditions, the mean delivered dose from the mouthpiece was approximately 62 mcg (35% of label claim), at a mean flow rate of 4 LPM. The mean nebulization time was 8 minutes. YUPELRI should only be administered via a standard jet nebulizer connected to an air compressor with an adequate airflow, and equipped with a mouthpiece."
},
{
"NDCCode": "55289-806-93",
"PackageDescription": "180 TABLET in 1 BOTTLE, PLASTIC (55289-806-93) ",
"NDC11Code": "55289-0806-93",
"ProductNDC": "55289-806",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glipizide",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19950227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074223",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19950227",
"SamplePackage": "N",
"IndicationAndUsage": "Glipizide tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Glipizide is an oral blood-glucose-lowering drug of the sulfonylurea class. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazine-carboxamido) ethyl]phenyl]sulfonyl]urea. The molecular formula is C 21H 27N 5O 4S; the molecular weight is 445.55; the structural formula is shown below:. Glipizide, USP is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 NNaOH; it is freely soluble in dimethylformamide. Each tablet, for oral administration, contains 5 mg or 10 mg glipizide, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide; croscarmellose sodium; lactose anhydrous; microcrystalline cellulose; pregelatinized starch 1500 (maize) and stearic acid."
},
{
"NDCCode": "49502-806-77",
"PackageDescription": "7 POUCH in 1 CARTON (49502-806-77) > 1 VIAL, SINGLE-DOSE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "49502-0806-77",
"ProductNDC": "49502-806",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Yupelri",
"NonProprietaryName": "Revefenacin",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181203",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210598",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "REVEFENACIN",
"StrengthNumber": "175",
"StrengthUnit": "ug/3mL",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20190222",
"EndMarketingDatePackage": "20210630",
"SamplePackage": "N"
},
{
"NDCCode": "49502-806-87",
"PackageDescription": "7 POUCH in 1 CARTON (49502-806-87) / 1 VIAL, SINGLE-DOSE in 1 POUCH (49502-806-33) / 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "49502-0806-87",
"ProductNDC": "49502-806",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Yupelri",
"NonProprietaryName": "Revefenacin",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20181203",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210598",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "REVEFENACIN",
"StrengthNumber": "175",
"StrengthUnit": "ug/3mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "Y",
"IndicationAndUsage": "YUPELRI is indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD).",
"Description": "YUPELRI is a sterile, clear, colorless, aqueous solution of revefenacin. Revefenacin, the active component of YUPELRI, is an anticholinergic. The chemical name for revefenacin is 1-(2-{4-[(4-carbamoylpiperidin-1-yl)methyl]-N-methylbenzamido}ethyl)piperidin-4-yl N-({1,1’-biphenyl}-2-yl)carbamate; its structural formula is. Revefenacin has a molecular weight of 597.76 and its empirical formula is C35H43N5O4. Revefenacin is a white to off-white crystalline powder and is slightly soluble in water. YUPELRI is supplied as 3 mL of revefenacin solution packaged in a unit-dose low-density polyethylene vial overwrapped in a foil pouch. Each vial contains 175 mcg of revefenacin in 3 mL of an isotonic, sterile aqueous solution containing citric acid, sodium chloride, sodium citrate, and water for injection at pH 5.0. Hydrochloric acid or sodium hydroxide may be used to adjust the pH. YUPELRI does not require dilution prior to administration by nebulization. Like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the nebulization system used, and compressor performance. Using the PARI LC® Sprint nebulizer connected to a PARI Trek® S compressor under in vitro conditions, the mean delivered dose from the mouthpiece was approximately 62 mcg (35% of label claim), at a mean flow rate of 4 LPM. The mean nebulization time was 8 minutes. YUPELRI should only be administered via a standard jet nebulizer connected to an air compressor with an adequate airflow, and equipped with a mouthpiece."
},
{
"NDCCode": "49502-425-93",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (49502-425-93) / 30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
"NDC11Code": "49502-0425-93",
"ProductNDC": "49502-425",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Symfi Lo",
"NonProprietaryName": "Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180313",
"EndMarketingDate": "20251031",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208255",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "EFAVIRENZ; LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE",
"StrengthNumber": "400; 300; 300",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180313",
"EndMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "SYMFI LO® (efavirenz, lamivudine and tenofovir disoproxil fumarate) is indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 35 kg.",
"Description": "SYMFI LO (efavirenz, lamivudine and tenofovir disoproxil fumarate) is a fixed-dose combination tablet for oral administration. Each tablet contains 400 mg of efavirenz, 300 mg of lamivudine and 300 mg of tenofovir disoproxil fumarate, which is equivalent to 245 mg of tenofovir disoproxil. Each tablet contains the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium lauryl sulfate, talc, titanium dioxide and yellow iron oxide. Efavirenz: Efavirenz (EFV) is an HIV-1 specific, non-nucleoside, reverse transcriptase inhibitor (NNRTI). Efavirenz is chemically described as (S)-6-Chloro-4-(cyclopropylethynyl)-1,4-dihydro-4-(trifluoromethyl)-2H-3,1-benzoxazin-2-one. Its molecular formula is C14H9ClF3NO2 and its structural formula is:. Efavirenz is a white to slightly pink crystalline powder with a molecular mass of 315.67. It is soluble in methanol and practically insoluble in water (< 10 microgram/mL). Lamivudine: Lamivudine (also known as 3TC) is a synthetic nucleoside analogue with activity against HIV-1 and HBV. The chemical name of lamivudine is (-)-1-[(2R,5S)-2-(Hydroxymethyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine is a white to off-white solid with a solubility of approximately 70 mg per mL in water at 20°C. Tenofovir Disoproxil Fumarate: Tenofovir disoproxil fumarate (TDF) (a prodrug of tenofovir) is a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester derivative of tenofovir. TDF is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5’-monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. The chemical name of TDF is 9-[(R)-2-[[bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.51. It has the following structural formula. Tenofovir disoproxil fumarate is a white to off-white powder that is freely soluble in dimethylformamide and soluble in methanol. It has an octanol/phosphate buffer (pH 6.5) partition coefficient (log p) of 1.25 at 25°C."
},
{
"NDCCode": "49502-450-93",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (49502-450-93) / 30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
"NDC11Code": "49502-0450-93",
"ProductNDC": "49502-450",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cimduo",
"NonProprietaryName": "Lamivudine And Tenofovir Disoproxil Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180625",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022141",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE",
"StrengthNumber": "300; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]",
"Status": "Active",
"LastUpdate": "2025-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180625",
"SamplePackage": "N",
"IndicationAndUsage": "CIMDUO® (lamivudine and tenofovir disoproxil fumarate) is indicated in combination with other antiretroviral agents for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 35 kg.",
"Description": "CIMDUO tablets contain lamivudine (also known as 3TC), a synthetic nucleoside analogue with activity against HIV-1 and tenofovir disoproxil fumarate or tenofovir DF, a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester prodrug of tenofovir. In vivo tenofovir DF is converted to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5’-monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. The chemical name of lamivudine is (-)-1-[2R,5S)-2-Hydroxymethyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine is a white to off-white solid with a solubility of approximately 70 mg per mL in water at 20°C. The chemical name of tenofovir DF is 9-[(R)-2-[[Bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.51. It has the following structural formula. Tenofovir DF is a white to off-white powder with a solubility of 13.4 mg/mL in distilled water at 25°C. It has an octanol/phosphate buffer (pH 6.5) partition coefficient (log p) of 1.25 at 25°C. CIMDUO tablets are for oral administration. Each film-coated tablet contains 300 mg of lamivudine and 300 mg of tenofovir disoproxil fumarate, which is equivalent to 245 mg of tenofovir disoproxil, and the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose. The tablet coating contains polyethylene glycol, titanium dioxide, polyvinyl alcohol and talc."
},
{
"NDCCode": "49502-475-93",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (49502-475-93) / 30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
"NDC11Code": "49502-0475-93",
"ProductNDC": "49502-475",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Symfi",
"NonProprietaryName": "Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180425",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022142",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "EFAVIRENZ; LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE",
"StrengthNumber": "600; 300; 300",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]",
"Status": "Active",
"LastUpdate": "2025-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180425",
"SamplePackage": "N",
"IndicationAndUsage": "SYMFI® (efavirenz, lamivudine and tenofovir disoproxil fumarate) is indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 40 kg.",
"Description": "SYMFI tablets contain efavirenz (EFV), an HIV-1 specific, non-nucleoside, reverse transcriptase inhibitor (NNRTI), lamivudine (also known as 3TC), a synthetic nucleoside analogue with activity against HIV-1 and tenofovir disoproxil fumarate (TDF) (a prodrug of tenofovir), a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester derivative of tenofovir. TDF is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5’-monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. SYMFI tablets are for oral administration. Each film-coated tablet contains 600 mg of efavirenz, 300 mg of lamivudine and 300 mg of tenofovir disoproxil fumarate, which is equivalent to 245 mg of tenofovir disoproxil, and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium chloride, sodium lauryl sulfate, talc and titanium dioxide. Efavirenz: The chemical name of efavirenz is (4S)-6-chloro-4-(cyclopropylethynyl)-1,4-dihydro-4-(trifluoromethyl)-2H-3,1-benzoxazin-2-one. Its molecular formula is C14H9ClF3NO2 and its structural formula is:. Efavirenz is a white to slightly pink crystalline powder with a molecular mass of 315.68. It is soluble in methanol and practically insoluble in water (< 10 microgram/mL). Lamivudine: The chemical name of lamivudine is (-)-1-[(2R,5S)-2-(Hydroxymethyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine is a white to off-white solid with a solubility of approximately 70 mg per mL in water at 20°C. Tenofovir Disoproxil Fumarate: The chemical name of tenofovir DF is 9-[(R)-2-[[Bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.51. It has the following structural formula. Tenofovir DF is a white to off-white powder with a solubility of 13.4 mg/mL in distilled water at 25°C. It has an octanol/phosphate buffer (pH 6.5) partition coefficient (log p) of 1.25 at 25°C."
},
{
"NDCCode": "49502-101-02",
"PackageDescription": "2 CONTAINER in 1 CARTON (49502-101-02) / 1 SYRINGE, GLASS in 1 CONTAINER (49502-101-01) / .3 mL in 1 SYRINGE, GLASS",
"NDC11Code": "49502-0101-02",
"ProductNDC": "49502-101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20161215",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019430",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".15",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20161215",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine injection, USP auto-injectors are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injectors are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. Epinephrine injection, USP auto-injectors are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.",
"Description": "Epinephrine injection, USP auto-injectors, 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each epinephrine injection, USP auto-injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each epinephrine injection, USP auto-injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.3 mg contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.15 mg contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [see Patient Counseling Information (17)]."
},
{
"NDCCode": "49502-102-02",
"PackageDescription": "2 CONTAINER in 1 CARTON (49502-102-02) / 1 SYRINGE, GLASS in 1 CONTAINER (49502-102-01) / .3 mL in 1 SYRINGE, GLASS",
"NDC11Code": "49502-0102-02",
"ProductNDC": "49502-102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20161215",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019430",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".3",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-02-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20161215",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine injection, USP auto-injectors are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injectors are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. Epinephrine injection, USP auto-injectors are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.",
"Description": "Epinephrine injection, USP auto-injectors, 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each epinephrine injection, USP auto-injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each epinephrine injection, USP auto-injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.3 mg contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.15 mg contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [see Patient Counseling Information (17)]."
},
{
"NDCCode": "49502-195-80",
"PackageDescription": "1 VIAL in 1 CARTON (49502-195-80) > 10 mL in 1 VIAL",
"NDC11Code": "49502-0195-80",
"ProductNDC": "49502-195",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Semglee",
"NonProprietaryName": "Insulin Glargine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20200831",
"EndMarketingDate": "20220731",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA210605",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200831",
"EndMarketingDatePackage": "20220731",
"SamplePackage": "N"
},
{
"NDCCode": "49502-196-75",
"PackageDescription": "5 SYRINGE in 1 CARTON (49502-196-75) > 3 mL in 1 SYRINGE (49502-196-35) ",
"NDC11Code": "49502-0196-75",
"ProductNDC": "49502-196",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Semglee",
"NonProprietaryName": "Insulin Glargine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20200831",
"EndMarketingDate": "20221130",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA210605",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200831",
"EndMarketingDatePackage": "20221130",
"SamplePackage": "N"
},
{
"NDCCode": "49502-250-80",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (49502-250-80) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "49502-0250-80",
"ProductNDC": "49502-250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Semglee",
"NonProprietaryName": "Insulin Glargine-yfgn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761201",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20211115",
"SamplePackage": "N",
"IndicationAndUsage": "SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4."
},
{
"NDCCode": "49502-251-35",
"PackageDescription": "1 SYRINGE in 1 CARTON (49502-251-35) / 3 mL in 1 SYRINGE",
"NDC11Code": "49502-0251-35",
"ProductNDC": "49502-251",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Semglee",
"NonProprietaryName": "Insulin Glargine-yfgn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761201",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241001",
"SamplePackage": "Y",
"IndicationAndUsage": "SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4."
},
{
"NDCCode": "49502-251-71",
"PackageDescription": "1 SYRINGE in 1 CARTON (49502-251-71) / 3 mL in 1 SYRINGE",
"NDC11Code": "49502-0251-71",
"ProductNDC": "49502-251",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Semglee",
"NonProprietaryName": "Insulin Glargine-yfgn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761201",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241001",
"SamplePackage": "N",
"IndicationAndUsage": "SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4."
},
{
"NDCCode": "49502-251-73",
"PackageDescription": "3 SYRINGE in 1 CARTON (49502-251-73) / 3 mL in 1 SYRINGE",
"NDC11Code": "49502-0251-73",
"ProductNDC": "49502-251",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Semglee",
"NonProprietaryName": "Insulin Glargine-yfgn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761201",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241001",
"SamplePackage": "N",
"IndicationAndUsage": "SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4."
},
{
"NDCCode": "49502-251-75",
"PackageDescription": "5 SYRINGE in 1 CARTON (49502-251-75) / 3 mL in 1 SYRINGE",
"NDC11Code": "49502-0251-75",
"ProductNDC": "49502-251",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Semglee",
"NonProprietaryName": "Insulin Glargine-yfgn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761201",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20211115",
"SamplePackage": "N",
"IndicationAndUsage": "SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4."
},
{
"NDCCode": "49502-251-98",
"PackageDescription": "3 SYRINGE in 1 CARTON (49502-251-98) / 3 mL in 1 SYRINGE",
"NDC11Code": "49502-0251-98",
"ProductNDC": "49502-251",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Semglee",
"NonProprietaryName": "Insulin Glargine-yfgn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761201",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241001",
"SamplePackage": "Y",
"IndicationAndUsage": "SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4."
},
{
"NDCCode": "49502-251-99",
"PackageDescription": "5 SYRINGE in 1 CARTON (49502-251-99) / 3 mL in 1 SYRINGE",
"NDC11Code": "49502-0251-99",
"ProductNDC": "49502-251",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Semglee",
"NonProprietaryName": "Insulin Glargine-yfgn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211115",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761201",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241001",
"SamplePackage": "Y",
"IndicationAndUsage": "SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4."
},
{
"NDCCode": "49502-345-73",
"PackageDescription": "56 POUCH in 1 CARTON (49502-345-73) / 4 AMPULE in 1 POUCH (49502-345-99) / 5 mL in 1 AMPULE",
"NDC11Code": "49502-0345-73",
"ProductNDC": "49502-345",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobi",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL; RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220623",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050753",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "TOBRAMYCIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220623",
"EndMarketingDatePackage": "20261031",
"SamplePackage": "N",
"IndicationAndUsage": "TOBI is indicated for the management of cystic fibrosis in adults and pediatric patients 6 years of age and older with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of 6 years, patients with forced expiratory volume in 1 second (FEV1) < 25% or > 75% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].",
"Description": "TOBI® is a tobramycin solution for inhalation. It is a sterile, clear, slightly yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C18H37N5O9 and the molecular weight is 467.52 g/mol. Tobramycin is O-3-amino-3-deoxy-α-D‑glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6- trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin is. Each single-dose 5 mL ampoule contains 300 mg tobramycin and 11.25 mg sodium chloride in sterile water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives."
},
{
"NDCCode": "49502-345-74",
"PackageDescription": "56 POUCH in 1 CARTON (49502-345-74) / 14 AMPULE in 1 POUCH (49502-345-01) / 5 mL in 1 AMPULE",
"NDC11Code": "49502-0345-74",
"ProductNDC": "49502-345",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobi",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL; RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220623",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050753",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "TOBRAMYCIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260625",
"SamplePackage": "N",
"IndicationAndUsage": "TOBI is indicated for the management of cystic fibrosis in adults and pediatric patients 6 years of age and older with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of 6 years, patients with forced expiratory volume in 1 second (FEV1) < 25% or > 75% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].",
"Description": "TOBI® is a tobramycin solution for inhalation. It is a sterile, clear, slightly yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C18H37N5O9 and the molecular weight is 467.52 g/mol. Tobramycin is O-3-amino-3-deoxy-α-D‑glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6- trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin is. Each single-dose 5 mL ampoule contains 300 mg tobramycin and 11.25 mg sodium chloride in sterile water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives."
},
{
"NDCCode": "49502-346-24",
"PackageDescription": "224 PACKAGE in 1 BOX, UNIT-DOSE (49502-346-24) > 56 BLISTER PACK in 1 PACKAGE > 4 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "49502-0346-24",
"ProductNDC": "49502-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobi Podhaler",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL; RESPIRATORY (INHALATION)",
"StartMarketingDate": "20200924",
"EndMarketingDate": "20230531",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA201688",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "TOBRAMYCIN",
"StrengthNumber": "28",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200924",
"EndMarketingDatePackage": "20230531",
"SamplePackage": "N"
},
{
"NDCCode": "49502-346-57",
"PackageDescription": "7 BLISTER PACK in 1 BOX, UNIT-DOSE (49502-346-57) > 8 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "49502-0346-57",
"ProductNDC": "49502-346",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobi Podhaler",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL; RESPIRATORY (INHALATION)",
"StartMarketingDate": "20200924",
"EndMarketingDate": "20301231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA201688",
"LabelerName": "Mylan Specialty L.P.",
"SubstanceName": "TOBRAMYCIN",
"StrengthNumber": "28",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210723",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "Y"
},
{
"NDCCode": "49502-378-15",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (49502-378-15) / 150 mL in 1 BOTTLE, GLASS",
"NDC11Code": "49502-0378-15",
"ProductNDC": "49502-378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ermeza",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20221214",
"EndMarketingDate": "20260731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215809",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "30",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20221214",
"EndMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. ERMEZA is indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. ERMEZA is indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 ERMEZA is not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with ERMEZA may induce hyperthyroidism [see Warnings and Precautions (5.1)]. , 2 ERMEZA is not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis. .",
"Description": "ERMEZA (levothyroxine sodium) oral solution contains synthetic L-3,3', 5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland, and is very slightly soluble in water. Levothyroxine (T4) sodium hydrate has an empirical formula of C15H10I4NNaO4 with x ≈ 5*, molecular weight of 798.86 (anhydrous), and structural formula as shown. ERMEZA oral solution is supplied in the following strength: 150 mcg/5 mL (30 mcg/mL). ERMEZA oral solution contains the following inactive ingredients: edetate disodium, glycerin, and purified water."
},
{
"NDCCode": "49502-378-75",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (49502-378-75) / 75 mL in 1 BOTTLE, GLASS",
"NDC11Code": "49502-0378-75",
"ProductNDC": "49502-378",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ermeza",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20221214",
"EndMarketingDate": "20260731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215809",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "30",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20221214",
"EndMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "Hypothyroidism. ERMEZA is indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. ERMEZA is indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 ERMEZA is not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with ERMEZA may induce hyperthyroidism [see Warnings and Precautions (5.1)]. , 2 ERMEZA is not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis. .",
"Description": "ERMEZA (levothyroxine sodium) oral solution contains synthetic L-3,3', 5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland, and is very slightly soluble in water. Levothyroxine (T4) sodium hydrate has an empirical formula of C15H10I4NNaO4 with x ≈ 5*, molecular weight of 798.86 (anhydrous), and structural formula as shown. ERMEZA oral solution is supplied in the following strength: 150 mcg/5 mL (30 mcg/mL). ERMEZA oral solution contains the following inactive ingredients: edetate disodium, glycerin, and purified water."
},
{
"NDCCode": "49502-380-02",
"PackageDescription": "2 TRAY in 1 KIT (49502-380-02) / 1 KIT in 1 TRAY * 2 TRAY in 1 KIT (49502-540-06) / 1 SYRINGE in 1 TRAY / .8 mL in 1 SYRINGE * 2 PACKET in 1 KIT (49502-542-06) / 1 mL in 1 PACKET",
"NDC11Code": "49502-0380-02",
"ProductNDC": "49502-380",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hulio",
"NonProprietaryName": "Adalimumab-fkjp",
"DosageFormName": "KIT",
"StartMarketingDate": "20230701",
"EndMarketingDate": "20250630",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761154",
"LabelerName": "Viatris Specialty LLC",
"Status": "Deprecated",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230701",
"EndMarketingDatePackage": "20250630",
"SamplePackage": "N",
"IndicationAndUsage": "HULIO is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA) (1.1): reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA., 2 Juvenile Idiopathic Arthritis (JIA) (1.2): reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older., 3 Psoriatic Arthritis (PsA) (1.3): reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA., 4 Ankylosing Spondylitis (AS) (1.4): reducing signs and symptoms in adult patients with active AS., 5 Crohn’s Disease (CD) (1.5): treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older., 6 Ulcerative Colitis (UC) (1.6): treatment of moderately to severely active ulcerative colitis in adult patients., 7 Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 8 Plaque Psoriasis (Ps) (1.7): treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate., 9 Hidradenitis Suppurativa (HS) (1.8): treatment of moderate to severe hidradenitis suppurativa in adult patients., 10 Uveitis (UV) (1.9): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients.",
"Description": "Adalimumab-fkjp is a tumor necrosis factor blocker. Adalimumab-fkjp is a recombinant human IgG1 monoclonal antibody. Adalimumab-fkjp is produced by recombinant DNA technology in a mammalian cell expression system (Chinese Hamster Ovary Cells) and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. HULIO (adalimumab-fkjp) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled pen (HULIO Pen) or as a single-dose, 1 mL prefilled plastic syringe. Enclosed within the pen is a single- dose, 1 mL prefilled plastic syringe. The solution of HULIO is clear to slightly opalescent, colorless to pale brownish-yellow, with a pH of about 5.2. Each 40 mg/0.8 mL prefilled syringe or prefilled pen delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of HULIO contains adalimumab-fkjp (40 mg), methionine (0.60 mg), monosodium glutamate (1.50 mg), polysorbate 80 (0.80 mg), sorbitol (38.2 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of HULIO contains adalimumab-fkjp (20 mg), methionine (0.30 mg), monosodium glutamate (0.75 mg), polysorbate 80 (0.40 mg), sorbitol (19.1 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH."
},
{
"NDCCode": "49502-381-02",
"PackageDescription": "2 TRAY in 1 KIT (49502-381-02) / 1 KIT in 1 TRAY * 2 TRAY in 1 KIT (49502-567-06) / 1 SYRINGE in 1 TRAY / .4 mL in 1 SYRINGE * 2 PACKET in 1 KIT (49502-569-02) / 1 mL in 1 PACKET",
"NDC11Code": "49502-0381-02",
"ProductNDC": "49502-381",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hulio",
"NonProprietaryName": "Adalimumab-fkjp",
"DosageFormName": "KIT",
"StartMarketingDate": "20230701",
"EndMarketingDate": "20250831",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761154",
"LabelerName": "Viatris Specialty LLC",
"Status": "Deprecated",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230701",
"EndMarketingDatePackage": "20250831",
"SamplePackage": "N",
"IndicationAndUsage": "HULIO is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA) (1.1): reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA., 2 Juvenile Idiopathic Arthritis (JIA) (1.2): reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older., 3 Psoriatic Arthritis (PsA) (1.3): reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA., 4 Ankylosing Spondylitis (AS) (1.4): reducing signs and symptoms in adult patients with active AS., 5 Crohn’s Disease (CD) (1.5): treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older., 6 Ulcerative Colitis (UC) (1.6): treatment of moderately to severely active ulcerative colitis in adult patients., 7 Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 8 Plaque Psoriasis (Ps) (1.7): treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate., 9 Hidradenitis Suppurativa (HS) (1.8): treatment of moderate to severe hidradenitis suppurativa in adult patients., 10 Uveitis (UV) (1.9): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients.",
"Description": "Adalimumab-fkjp is a tumor necrosis factor blocker. Adalimumab-fkjp is a recombinant human IgG1 monoclonal antibody. Adalimumab-fkjp is produced by recombinant DNA technology in a mammalian cell expression system (Chinese Hamster Ovary Cells) and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. HULIO (adalimumab-fkjp) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled pen (HULIO Pen) or as a single-dose, 1 mL prefilled plastic syringe. Enclosed within the pen is a single- dose, 1 mL prefilled plastic syringe. The solution of HULIO is clear to slightly opalescent, colorless to pale brownish-yellow, with a pH of about 5.2. Each 40 mg/0.8 mL prefilled syringe or prefilled pen delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of HULIO contains adalimumab-fkjp (40 mg), methionine (0.60 mg), monosodium glutamate (1.50 mg), polysorbate 80 (0.80 mg), sorbitol (38.2 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of HULIO contains adalimumab-fkjp (20 mg), methionine (0.30 mg), monosodium glutamate (0.75 mg), polysorbate 80 (0.40 mg), sorbitol (19.1 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH."
},
{
"NDCCode": "49502-382-02",
"PackageDescription": "2 TRAY in 1 KIT (49502-382-02) / 1 KIT in 1 TRAY * 2 TRAY in 1 KIT (49502-554-06) / 1 SYRINGE in 1 TRAY / .8 mL in 1 SYRINGE * 2 PACKET in 1 KIT (49502-556-06) / 1 mL in 1 PACKET",
"NDC11Code": "49502-0382-02",
"ProductNDC": "49502-382",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hulio",
"NonProprietaryName": "Adalimumab-fkjp",
"DosageFormName": "KIT",
"StartMarketingDate": "20230701",
"EndMarketingDate": "20250630",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761154",
"LabelerName": "Viatris Specialty LLC",
"Status": "Deprecated",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230701",
"EndMarketingDatePackage": "20250630",
"SamplePackage": "N",
"IndicationAndUsage": "HULIO is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA) (1.1): reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA., 2 Juvenile Idiopathic Arthritis (JIA) (1.2): reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older., 3 Psoriatic Arthritis (PsA) (1.3): reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA., 4 Ankylosing Spondylitis (AS) (1.4): reducing signs and symptoms in adult patients with active AS., 5 Crohn’s Disease (CD) (1.5): treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older., 6 Ulcerative Colitis (UC) (1.6): treatment of moderately to severely active ulcerative colitis in adult patients., 7 Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 8 Plaque Psoriasis (Ps) (1.7): treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate., 9 Hidradenitis Suppurativa (HS) (1.8): treatment of moderate to severe hidradenitis suppurativa in adult patients., 10 Uveitis (UV) (1.9): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients.",
"Description": "Adalimumab-fkjp is a tumor necrosis factor blocker. Adalimumab-fkjp is a recombinant human IgG1 monoclonal antibody. Adalimumab-fkjp is produced by recombinant DNA technology in a mammalian cell expression system (Chinese Hamster Ovary Cells) and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. HULIO (adalimumab-fkjp) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled pen (HULIO Pen) or as a single-dose, 1 mL prefilled plastic syringe. Enclosed within the pen is a single- dose, 1 mL prefilled plastic syringe. The solution of HULIO is clear to slightly opalescent, colorless to pale brownish-yellow, with a pH of about 5.2. Each 40 mg/0.8 mL prefilled syringe or prefilled pen delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of HULIO contains adalimumab-fkjp (40 mg), methionine (0.60 mg), monosodium glutamate (1.50 mg), polysorbate 80 (0.80 mg), sorbitol (38.2 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of HULIO contains adalimumab-fkjp (20 mg), methionine (0.30 mg), monosodium glutamate (0.75 mg), polysorbate 80 (0.40 mg), sorbitol (19.1 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH."
},
{
"NDCCode": "49502-393-80",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (49502-393-80) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "49502-0393-80",
"ProductNDC": "49502-393",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Insulin Glargine",
"NonProprietaryName": "Insulin Glargine-yfgn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211116",
"EndMarketingDate": "20250228",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761201",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-02-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20211116",
"EndMarketingDatePackage": "20250228",
"SamplePackage": "N",
"IndicationAndUsage": "Insulin Glargine-yfgn is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. Insulin Glargine-yfgn is not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. Insulin Glargine-yfgn is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. Insulin Glargine-yfgn has a pH of approximately 4."
},
{
"NDCCode": "49502-394-75",
"PackageDescription": "5 SYRINGE in 1 CARTON (49502-394-75) / 3 mL in 1 SYRINGE (49502-394-71) ",
"NDC11Code": "49502-0394-75",
"ProductNDC": "49502-394",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Insulin Glargine",
"NonProprietaryName": "Insulin Glargine-yfgn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20211116",
"EndMarketingDate": "20250430",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761201",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20211116",
"EndMarketingDatePackage": "20250430",
"SamplePackage": "N",
"IndicationAndUsage": "Insulin Glargine-yfgn is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. Insulin Glargine-yfgn is not recommended for the treatment of diabetic ketoacidosis.",
"Description": "Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. Insulin Glargine-yfgn is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. Insulin Glargine-yfgn has a pH of approximately 4."
},
{
"NDCCode": "49502-401-09",
"PackageDescription": "8 CAPSULE in 1 BOX, UNIT-DOSE (49502-401-09) ",
"NDC11Code": "49502-0401-09",
"ProductNDC": "49502-401",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobi Podhaler",
"NonProprietaryName": "Tobramycin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL; RESPIRATORY (INHALATION)",
"StartMarketingDate": "20210901",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA201688",
"LabelerName": "Viatris Specialty LLC",
"SubstanceName": "TOBRAMYCIN",
"StrengthNumber": "28",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221004",
"SamplePackage": "Y",
"IndicationAndUsage": "TOBI Podhaler is indicated for the management of cystic fibrosis patients with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of 6 years, patients with forced expiratory volume in 1 second (FEV1) <25% or >80% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].",
"Description": "TOBI Podhaler consists of a dry powder formulation of tobramycin for oral inhalation only with the Podhaler device. The inhalation powder is filled into clear, colorless hypromellose capsules. Each clear, colorless hypromellose capsule contains a spray dried powder of 28 mg of tobramycin active ingredient with 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), calcium chloride, and sulfuric acid (for pH adjustment). The active component of TOBI Podhaler is tobramycin. Tobramycin is an aminoglycoside antibiotic. Its chemical name is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine; its structural formula is. Tobramycin has a molecular weight of 467.52, and its empirical formula is C18H37N5O9. Tobramycin is a white to almost white powder; visually free from any foreign contaminants. Tobramycin is freely soluble in water, very slightly soluble in ethanol, and practically insoluble in chloroform and ether. The Podhaler device is a plastic device used to inhale the dry powder contained in the TOBI Podhaler capsule. Under standardized in vitro testing at a fixed flow rate of 60 L/min and volume of 2 L for 2 seconds, the Podhaler device has a target delivered dose of 102 mg of tobramycin from the mouthpiece (4 capsules per dose). Peak inspiratory flow rate and inhaled volumes were explored in 96 cystic fibrosis patients aged 6 years and older. Older patients with significant disease progression and associated decreases in forced expiratory volume (FEV1) and younger patients with inhaled volumes <1 L were able to generate inspiratory flow rates and volumes required to receive their medication when following the instructions for use. However, no pediatric patients aged 6 to 10 years with FEV1 less than 40% predicted were evaluated."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49502-806-93</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (49502-806-93) / 1 VIAL, SINGLE-DOSE in 1 POUCH (49502-806-32) / 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>49502-0806-93</NDC11Code>
<ProductNDC>49502-806</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Yupelri</ProprietaryName>
<NonProprietaryName>Revefenacin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181203</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210598</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>REVEFENACIN</SubstanceName>
<StrengthNumber>175</StrengthNumber>
<StrengthUnit>ug/3mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>YUPELRI is indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD).</IndicationAndUsage>
<Description>YUPELRI is a sterile, clear, colorless, aqueous solution of revefenacin. Revefenacin, the active component of YUPELRI, is an anticholinergic. The chemical name for revefenacin is 1-(2-{4-[(4-carbamoylpiperidin-1-yl)methyl]-N-methylbenzamido}ethyl)piperidin-4-yl N-({1,1’-biphenyl}-2-yl)carbamate; its structural formula is. Revefenacin has a molecular weight of 597.76 and its empirical formula is C35H43N5O4. Revefenacin is a white to off-white crystalline powder and is slightly soluble in water. YUPELRI is supplied as 3 mL of revefenacin solution packaged in a unit-dose low-density polyethylene vial overwrapped in a foil pouch. Each vial contains 175 mcg of revefenacin in 3 mL of an isotonic, sterile aqueous solution containing citric acid, sodium chloride, sodium citrate, and water for injection at pH 5.0. Hydrochloric acid or sodium hydroxide may be used to adjust the pH. YUPELRI does not require dilution prior to administration by nebulization. Like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the nebulization system used, and compressor performance. Using the PARI LC® Sprint nebulizer connected to a PARI Trek® S compressor under in vitro conditions, the mean delivered dose from the mouthpiece was approximately 62 mcg (35% of label claim), at a mean flow rate of 4 LPM. The mean nebulization time was 8 minutes. YUPELRI should only be administered via a standard jet nebulizer connected to an air compressor with an adequate airflow, and equipped with a mouthpiece.</Description>
</NDC>
<NDC>
<NDCCode>55289-806-93</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE, PLASTIC (55289-806-93) </PackageDescription>
<NDC11Code>55289-0806-93</NDC11Code>
<ProductNDC>55289-806</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glipizide</ProprietaryName>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074223</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19950227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glipizide tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Glipizide is an oral blood-glucose-lowering drug of the sulfonylurea class. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazine-carboxamido) ethyl]phenyl]sulfonyl]urea. The molecular formula is C 21H 27N 5O 4S; the molecular weight is 445.55; the structural formula is shown below:. Glipizide, USP is a whitish, odorless powder with a pKa of 5.9. It is insoluble in water and alcohols, but soluble in 0.1 NNaOH; it is freely soluble in dimethylformamide. Each tablet, for oral administration, contains 5 mg or 10 mg glipizide, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide; croscarmellose sodium; lactose anhydrous; microcrystalline cellulose; pregelatinized starch 1500 (maize) and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>49502-806-77</NDCCode>
<PackageDescription>7 POUCH in 1 CARTON (49502-806-77) > 1 VIAL, SINGLE-DOSE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>49502-0806-77</NDC11Code>
<ProductNDC>49502-806</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Yupelri</ProprietaryName>
<NonProprietaryName>Revefenacin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181203</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210598</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>REVEFENACIN</SubstanceName>
<StrengthNumber>175</StrengthNumber>
<StrengthUnit>ug/3mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190222</StartMarketingDatePackage>
<EndMarketingDatePackage>20210630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49502-806-87</NDCCode>
<PackageDescription>7 POUCH in 1 CARTON (49502-806-87) / 1 VIAL, SINGLE-DOSE in 1 POUCH (49502-806-33) / 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>49502-0806-87</NDC11Code>
<ProductNDC>49502-806</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Yupelri</ProprietaryName>
<NonProprietaryName>Revefenacin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20181203</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210598</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>REVEFENACIN</SubstanceName>
<StrengthNumber>175</StrengthNumber>
<StrengthUnit>ug/3mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>YUPELRI is indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD).</IndicationAndUsage>
<Description>YUPELRI is a sterile, clear, colorless, aqueous solution of revefenacin. Revefenacin, the active component of YUPELRI, is an anticholinergic. The chemical name for revefenacin is 1-(2-{4-[(4-carbamoylpiperidin-1-yl)methyl]-N-methylbenzamido}ethyl)piperidin-4-yl N-({1,1’-biphenyl}-2-yl)carbamate; its structural formula is. Revefenacin has a molecular weight of 597.76 and its empirical formula is C35H43N5O4. Revefenacin is a white to off-white crystalline powder and is slightly soluble in water. YUPELRI is supplied as 3 mL of revefenacin solution packaged in a unit-dose low-density polyethylene vial overwrapped in a foil pouch. Each vial contains 175 mcg of revefenacin in 3 mL of an isotonic, sterile aqueous solution containing citric acid, sodium chloride, sodium citrate, and water for injection at pH 5.0. Hydrochloric acid or sodium hydroxide may be used to adjust the pH. YUPELRI does not require dilution prior to administration by nebulization. Like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the nebulization system used, and compressor performance. Using the PARI LC® Sprint nebulizer connected to a PARI Trek® S compressor under in vitro conditions, the mean delivered dose from the mouthpiece was approximately 62 mcg (35% of label claim), at a mean flow rate of 4 LPM. The mean nebulization time was 8 minutes. YUPELRI should only be administered via a standard jet nebulizer connected to an air compressor with an adequate airflow, and equipped with a mouthpiece.</Description>
</NDC>
<NDC>
<NDCCode>49502-425-93</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (49502-425-93) / 30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>49502-0425-93</NDC11Code>
<ProductNDC>49502-425</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Symfi Lo</ProprietaryName>
<NonProprietaryName>Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180313</StartMarketingDate>
<EndMarketingDate>20251031</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208255</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>EFAVIRENZ; LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE</SubstanceName>
<StrengthNumber>400; 300; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180313</StartMarketingDatePackage>
<EndMarketingDatePackage>20251031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SYMFI LO® (efavirenz, lamivudine and tenofovir disoproxil fumarate) is indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 35 kg.</IndicationAndUsage>
<Description>SYMFI LO (efavirenz, lamivudine and tenofovir disoproxil fumarate) is a fixed-dose combination tablet for oral administration. Each tablet contains 400 mg of efavirenz, 300 mg of lamivudine and 300 mg of tenofovir disoproxil fumarate, which is equivalent to 245 mg of tenofovir disoproxil. Each tablet contains the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium lauryl sulfate, talc, titanium dioxide and yellow iron oxide. Efavirenz: Efavirenz (EFV) is an HIV-1 specific, non-nucleoside, reverse transcriptase inhibitor (NNRTI). Efavirenz is chemically described as (S)-6-Chloro-4-(cyclopropylethynyl)-1,4-dihydro-4-(trifluoromethyl)-2H-3,1-benzoxazin-2-one. Its molecular formula is C14H9ClF3NO2 and its structural formula is:. Efavirenz is a white to slightly pink crystalline powder with a molecular mass of 315.67. It is soluble in methanol and practically insoluble in water (< 10 microgram/mL). Lamivudine: Lamivudine (also known as 3TC) is a synthetic nucleoside analogue with activity against HIV-1 and HBV. The chemical name of lamivudine is (-)-1-[(2R,5S)-2-(Hydroxymethyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine is a white to off-white solid with a solubility of approximately 70 mg per mL in water at 20°C. Tenofovir Disoproxil Fumarate: Tenofovir disoproxil fumarate (TDF) (a prodrug of tenofovir) is a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester derivative of tenofovir. TDF is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5’-monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. The chemical name of TDF is 9-[(R)-2-[[bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.51. It has the following structural formula. Tenofovir disoproxil fumarate is a white to off-white powder that is freely soluble in dimethylformamide and soluble in methanol. It has an octanol/phosphate buffer (pH 6.5) partition coefficient (log p) of 1.25 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>49502-450-93</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (49502-450-93) / 30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>49502-0450-93</NDC11Code>
<ProductNDC>49502-450</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cimduo</ProprietaryName>
<NonProprietaryName>Lamivudine And Tenofovir Disoproxil Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180625</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022141</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE</SubstanceName>
<StrengthNumber>300; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CIMDUO® (lamivudine and tenofovir disoproxil fumarate) is indicated in combination with other antiretroviral agents for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 35 kg.</IndicationAndUsage>
<Description>CIMDUO tablets contain lamivudine (also known as 3TC), a synthetic nucleoside analogue with activity against HIV-1 and tenofovir disoproxil fumarate or tenofovir DF, a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester prodrug of tenofovir. In vivo tenofovir DF is converted to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5’-monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. The chemical name of lamivudine is (-)-1-[2R,5S)-2-Hydroxymethyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine is a white to off-white solid with a solubility of approximately 70 mg per mL in water at 20°C. The chemical name of tenofovir DF is 9-[(R)-2-[[Bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.51. It has the following structural formula. Tenofovir DF is a white to off-white powder with a solubility of 13.4 mg/mL in distilled water at 25°C. It has an octanol/phosphate buffer (pH 6.5) partition coefficient (log p) of 1.25 at 25°C. CIMDUO tablets are for oral administration. Each film-coated tablet contains 300 mg of lamivudine and 300 mg of tenofovir disoproxil fumarate, which is equivalent to 245 mg of tenofovir disoproxil, and the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose. The tablet coating contains polyethylene glycol, titanium dioxide, polyvinyl alcohol and talc.</Description>
</NDC>
<NDC>
<NDCCode>49502-475-93</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (49502-475-93) / 30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>49502-0475-93</NDC11Code>
<ProductNDC>49502-475</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Symfi</ProprietaryName>
<NonProprietaryName>Efavirenz, Lamivudine And Tenofovir Disoproxil Fumarate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180425</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022142</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>EFAVIRENZ; LAMIVUDINE; TENOFOVIR DISOPROXIL FUMARATE</SubstanceName>
<StrengthNumber>600; 300; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180425</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SYMFI® (efavirenz, lamivudine and tenofovir disoproxil fumarate) is indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adult and pediatric patients weighing at least 40 kg.</IndicationAndUsage>
<Description>SYMFI tablets contain efavirenz (EFV), an HIV-1 specific, non-nucleoside, reverse transcriptase inhibitor (NNRTI), lamivudine (also known as 3TC), a synthetic nucleoside analogue with activity against HIV-1 and tenofovir disoproxil fumarate (TDF) (a prodrug of tenofovir), a fumaric acid salt of bis-isopropoxycarbonyloxymethyl ester derivative of tenofovir. TDF is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5’-monophosphate. Tenofovir exhibits activity against HIV-1 reverse transcriptase. SYMFI tablets are for oral administration. Each film-coated tablet contains 600 mg of efavirenz, 300 mg of lamivudine and 300 mg of tenofovir disoproxil fumarate, which is equivalent to 245 mg of tenofovir disoproxil, and the following inactive ingredients: croscarmellose sodium, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium chloride, sodium lauryl sulfate, talc and titanium dioxide. Efavirenz: The chemical name of efavirenz is (4S)-6-chloro-4-(cyclopropylethynyl)-1,4-dihydro-4-(trifluoromethyl)-2H-3,1-benzoxazin-2-one. Its molecular formula is C14H9ClF3NO2 and its structural formula is:. Efavirenz is a white to slightly pink crystalline powder with a molecular mass of 315.68. It is soluble in methanol and practically insoluble in water (< 10 microgram/mL). Lamivudine: The chemical name of lamivudine is (-)-1-[(2R,5S)-2-(Hydroxymethyl)-1,3-oxathiolan-5-yl]cytosine. Lamivudine is the (-)enantiomer of a dideoxy analogue of cytidine. Lamivudine has also been referred to as (-)2′,3′-dideoxy, 3′-thiacytidine. It has a molecular formula of C8H11N3O3S and a molecular weight of 229.26 g per mol. It has the following structural formula. Lamivudine is a white to off-white solid with a solubility of approximately 70 mg per mL in water at 20°C. Tenofovir Disoproxil Fumarate: The chemical name of tenofovir DF is 9-[(R)-2-[[Bis[[(isopropoxycarbonyl)oxy]methoxy]phosphinyl]methoxy]propyl]adenine fumarate (1:1). It has a molecular formula of C19H30N5O10PC4H4O4 and a molecular weight of 635.51. It has the following structural formula. Tenofovir DF is a white to off-white powder with a solubility of 13.4 mg/mL in distilled water at 25°C. It has an octanol/phosphate buffer (pH 6.5) partition coefficient (log p) of 1.25 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>49502-101-02</NDCCode>
<PackageDescription>2 CONTAINER in 1 CARTON (49502-101-02) / 1 SYRINGE, GLASS in 1 CONTAINER (49502-101-01) / .3 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>49502-0101-02</NDC11Code>
<ProductNDC>49502-101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20161215</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019430</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine injection, USP auto-injectors are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injectors are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. Epinephrine injection, USP auto-injectors are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.</IndicationAndUsage>
<Description>Epinephrine injection, USP auto-injectors, 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each epinephrine injection, USP auto-injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each epinephrine injection, USP auto-injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.3 mg contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.15 mg contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [see Patient Counseling Information (17)].</Description>
</NDC>
<NDC>
<NDCCode>49502-102-02</NDCCode>
<PackageDescription>2 CONTAINER in 1 CARTON (49502-102-02) / 1 SYRINGE, GLASS in 1 CONTAINER (49502-102-01) / .3 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>49502-0102-02</NDC11Code>
<ProductNDC>49502-102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20161215</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019430</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.3</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine injection, USP auto-injectors are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injectors are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. Epinephrine injection, USP auto-injectors are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.</IndicationAndUsage>
<Description>Epinephrine injection, USP auto-injectors, 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each epinephrine injection, USP auto-injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each epinephrine injection, USP auto-injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.3 mg contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Each 0.3 mL in the epinephrine injection, USP auto-injector, 0.15 mg contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [see Patient Counseling Information (17)].</Description>
</NDC>
<NDC>
<NDCCode>49502-195-80</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (49502-195-80) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>49502-0195-80</NDC11Code>
<ProductNDC>49502-195</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Semglee</ProprietaryName>
<NonProprietaryName>Insulin Glargine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200831</StartMarketingDate>
<EndMarketingDate>20220731</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA210605</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200831</StartMarketingDatePackage>
<EndMarketingDatePackage>20220731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49502-196-75</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (49502-196-75) > 3 mL in 1 SYRINGE (49502-196-35) </PackageDescription>
<NDC11Code>49502-0196-75</NDC11Code>
<ProductNDC>49502-196</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Semglee</ProprietaryName>
<NonProprietaryName>Insulin Glargine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200831</StartMarketingDate>
<EndMarketingDate>20221130</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA210605</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200831</StartMarketingDatePackage>
<EndMarketingDatePackage>20221130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49502-250-80</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (49502-250-80) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>49502-0250-80</NDC11Code>
<ProductNDC>49502-250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Semglee</ProprietaryName>
<NonProprietaryName>Insulin Glargine-yfgn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761201</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4.</Description>
</NDC>
<NDC>
<NDCCode>49502-251-35</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (49502-251-35) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>49502-0251-35</NDC11Code>
<ProductNDC>49502-251</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Semglee</ProprietaryName>
<NonProprietaryName>Insulin Glargine-yfgn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761201</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241001</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4.</Description>
</NDC>
<NDC>
<NDCCode>49502-251-71</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (49502-251-71) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>49502-0251-71</NDC11Code>
<ProductNDC>49502-251</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Semglee</ProprietaryName>
<NonProprietaryName>Insulin Glargine-yfgn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761201</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4.</Description>
</NDC>
<NDC>
<NDCCode>49502-251-73</NDCCode>
<PackageDescription>3 SYRINGE in 1 CARTON (49502-251-73) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>49502-0251-73</NDC11Code>
<ProductNDC>49502-251</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Semglee</ProprietaryName>
<NonProprietaryName>Insulin Glargine-yfgn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761201</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4.</Description>
</NDC>
<NDC>
<NDCCode>49502-251-75</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (49502-251-75) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>49502-0251-75</NDC11Code>
<ProductNDC>49502-251</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Semglee</ProprietaryName>
<NonProprietaryName>Insulin Glargine-yfgn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761201</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4.</Description>
</NDC>
<NDC>
<NDCCode>49502-251-98</NDCCode>
<PackageDescription>3 SYRINGE in 1 CARTON (49502-251-98) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>49502-0251-98</NDC11Code>
<ProductNDC>49502-251</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Semglee</ProprietaryName>
<NonProprietaryName>Insulin Glargine-yfgn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761201</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241001</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4.</Description>
</NDC>
<NDC>
<NDCCode>49502-251-99</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (49502-251-99) / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>49502-0251-99</NDC11Code>
<ProductNDC>49502-251</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Semglee</ProprietaryName>
<NonProprietaryName>Insulin Glargine-yfgn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211115</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761201</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241001</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SEMGLEE is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. SEMGLEE is not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. SEMGLEE (insulin glargine-yfgn) injection is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. SEMGLEE has a pH of approximately 4.</Description>
</NDC>
<NDC>
<NDCCode>49502-345-73</NDCCode>
<PackageDescription>56 POUCH in 1 CARTON (49502-345-73) / 4 AMPULE in 1 POUCH (49502-345-99) / 5 mL in 1 AMPULE</PackageDescription>
<NDC11Code>49502-0345-73</NDC11Code>
<ProductNDC>49502-345</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobi</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL; RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220623</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050753</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>TOBRAMYCIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220623</StartMarketingDatePackage>
<EndMarketingDatePackage>20261031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TOBI is indicated for the management of cystic fibrosis in adults and pediatric patients 6 years of age and older with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of 6 years, patients with forced expiratory volume in 1 second (FEV1) < 25% or > 75% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].</IndicationAndUsage>
<Description>TOBI® is a tobramycin solution for inhalation. It is a sterile, clear, slightly yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C18H37N5O9 and the molecular weight is 467.52 g/mol. Tobramycin is O-3-amino-3-deoxy-α-D‑glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6- trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin is. Each single-dose 5 mL ampoule contains 300 mg tobramycin and 11.25 mg sodium chloride in sterile water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives.</Description>
</NDC>
<NDC>
<NDCCode>49502-345-74</NDCCode>
<PackageDescription>56 POUCH in 1 CARTON (49502-345-74) / 14 AMPULE in 1 POUCH (49502-345-01) / 5 mL in 1 AMPULE</PackageDescription>
<NDC11Code>49502-0345-74</NDC11Code>
<ProductNDC>49502-345</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobi</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL; RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220623</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050753</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>TOBRAMYCIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TOBI is indicated for the management of cystic fibrosis in adults and pediatric patients 6 years of age and older with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of 6 years, patients with forced expiratory volume in 1 second (FEV1) < 25% or > 75% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].</IndicationAndUsage>
<Description>TOBI® is a tobramycin solution for inhalation. It is a sterile, clear, slightly yellow, non-pyrogenic, aqueous solution with the pH and salinity adjusted specifically for administration by a compressed air driven reusable nebulizer. The chemical formula for tobramycin is C18H37N5O9 and the molecular weight is 467.52 g/mol. Tobramycin is O-3-amino-3-deoxy-α-D‑glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6- trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine. The structural formula for tobramycin is. Each single-dose 5 mL ampoule contains 300 mg tobramycin and 11.25 mg sodium chloride in sterile water for injection. Sulfuric acid and sodium hydroxide are added to adjust the pH to 6.0. Nitrogen is used for sparging. All ingredients meet USP requirements. The formulation contains no preservatives.</Description>
</NDC>
<NDC>
<NDCCode>49502-346-24</NDCCode>
<PackageDescription>224 PACKAGE in 1 BOX, UNIT-DOSE (49502-346-24) > 56 BLISTER PACK in 1 PACKAGE > 4 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>49502-0346-24</NDC11Code>
<ProductNDC>49502-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobi Podhaler</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL; RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20200924</StartMarketingDate>
<EndMarketingDate>20230531</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA201688</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>TOBRAMYCIN</SubstanceName>
<StrengthNumber>28</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200924</StartMarketingDatePackage>
<EndMarketingDatePackage>20230531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49502-346-57</NDCCode>
<PackageDescription>7 BLISTER PACK in 1 BOX, UNIT-DOSE (49502-346-57) > 8 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>49502-0346-57</NDC11Code>
<ProductNDC>49502-346</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobi Podhaler</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL; RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20200924</StartMarketingDate>
<EndMarketingDate>20301231</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA201688</ApplicationNumber>
<LabelerName>Mylan Specialty L.P.</LabelerName>
<SubstanceName>TOBRAMYCIN</SubstanceName>
<StrengthNumber>28</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210723</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
</NDC>
<NDC>
<NDCCode>49502-378-15</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (49502-378-15) / 150 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>49502-0378-15</NDC11Code>
<ProductNDC>49502-378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ermeza</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221214</StartMarketingDate>
<EndMarketingDate>20260731</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215809</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20221214</StartMarketingDatePackage>
<EndMarketingDatePackage>20260731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. ERMEZA is indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. ERMEZA is indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 ERMEZA is not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with ERMEZA may induce hyperthyroidism [see Warnings and Precautions (5.1)]. , 2 ERMEZA is not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis. .</IndicationAndUsage>
<Description>ERMEZA (levothyroxine sodium) oral solution contains synthetic L-3,3', 5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland, and is very slightly soluble in water. Levothyroxine (T4) sodium hydrate has an empirical formula of C15H10I4NNaO4 with x ≈ 5*, molecular weight of 798.86 (anhydrous), and structural formula as shown. ERMEZA oral solution is supplied in the following strength: 150 mcg/5 mL (30 mcg/mL). ERMEZA oral solution contains the following inactive ingredients: edetate disodium, glycerin, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>49502-378-75</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (49502-378-75) / 75 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>49502-0378-75</NDC11Code>
<ProductNDC>49502-378</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ermeza</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221214</StartMarketingDate>
<EndMarketingDate>20260731</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215809</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20221214</StartMarketingDatePackage>
<EndMarketingDatePackage>20260731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypothyroidism. ERMEZA is indicated in adult and pediatric patients, including neonates, as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid-Stimulating Hormone, TSH) Suppression. ERMEZA is indicated in adult and pediatric patients, including neonates, as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. Limitations of Use: : 1 ERMEZA is not indicated for suppression of benign thyroid nodules and nontoxic diffuse goiter in iodine-sufficient patients as there are no clinical benefits and overtreatment with ERMEZA may induce hyperthyroidism [see Warnings and Precautions (5.1)]. , 2 ERMEZA is not indicated for treatment of hypothyroidism during the recovery phase of subacute thyroiditis. .</IndicationAndUsage>
<Description>ERMEZA (levothyroxine sodium) oral solution contains synthetic L-3,3', 5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland, and is very slightly soluble in water. Levothyroxine (T4) sodium hydrate has an empirical formula of C15H10I4NNaO4 with x ≈ 5*, molecular weight of 798.86 (anhydrous), and structural formula as shown. ERMEZA oral solution is supplied in the following strength: 150 mcg/5 mL (30 mcg/mL). ERMEZA oral solution contains the following inactive ingredients: edetate disodium, glycerin, and purified water.</Description>
</NDC>
<NDC>
<NDCCode>49502-380-02</NDCCode>
<PackageDescription>2 TRAY in 1 KIT (49502-380-02) / 1 KIT in 1 TRAY * 2 TRAY in 1 KIT (49502-540-06) / 1 SYRINGE in 1 TRAY / .8 mL in 1 SYRINGE * 2 PACKET in 1 KIT (49502-542-06) / 1 mL in 1 PACKET</PackageDescription>
<NDC11Code>49502-0380-02</NDC11Code>
<ProductNDC>49502-380</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hulio</ProprietaryName>
<NonProprietaryName>Adalimumab-fkjp</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20230701</StartMarketingDate>
<EndMarketingDate>20250630</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761154</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230701</StartMarketingDatePackage>
<EndMarketingDatePackage>20250630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HULIO is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA) (1.1): reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA., 2 Juvenile Idiopathic Arthritis (JIA) (1.2): reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older., 3 Psoriatic Arthritis (PsA) (1.3): reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA., 4 Ankylosing Spondylitis (AS) (1.4): reducing signs and symptoms in adult patients with active AS., 5 Crohn’s Disease (CD) (1.5): treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older., 6 Ulcerative Colitis (UC) (1.6): treatment of moderately to severely active ulcerative colitis in adult patients., 7 Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 8 Plaque Psoriasis (Ps) (1.7): treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate., 9 Hidradenitis Suppurativa (HS) (1.8): treatment of moderate to severe hidradenitis suppurativa in adult patients., 10 Uveitis (UV) (1.9): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients.</IndicationAndUsage>
<Description>Adalimumab-fkjp is a tumor necrosis factor blocker. Adalimumab-fkjp is a recombinant human IgG1 monoclonal antibody. Adalimumab-fkjp is produced by recombinant DNA technology in a mammalian cell expression system (Chinese Hamster Ovary Cells) and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. HULIO (adalimumab-fkjp) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled pen (HULIO Pen) or as a single-dose, 1 mL prefilled plastic syringe. Enclosed within the pen is a single- dose, 1 mL prefilled plastic syringe. The solution of HULIO is clear to slightly opalescent, colorless to pale brownish-yellow, with a pH of about 5.2. Each 40 mg/0.8 mL prefilled syringe or prefilled pen delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of HULIO contains adalimumab-fkjp (40 mg), methionine (0.60 mg), monosodium glutamate (1.50 mg), polysorbate 80 (0.80 mg), sorbitol (38.2 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of HULIO contains adalimumab-fkjp (20 mg), methionine (0.30 mg), monosodium glutamate (0.75 mg), polysorbate 80 (0.40 mg), sorbitol (19.1 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>49502-381-02</NDCCode>
<PackageDescription>2 TRAY in 1 KIT (49502-381-02) / 1 KIT in 1 TRAY * 2 TRAY in 1 KIT (49502-567-06) / 1 SYRINGE in 1 TRAY / .4 mL in 1 SYRINGE * 2 PACKET in 1 KIT (49502-569-02) / 1 mL in 1 PACKET</PackageDescription>
<NDC11Code>49502-0381-02</NDC11Code>
<ProductNDC>49502-381</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hulio</ProprietaryName>
<NonProprietaryName>Adalimumab-fkjp</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20230701</StartMarketingDate>
<EndMarketingDate>20250831</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761154</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230701</StartMarketingDatePackage>
<EndMarketingDatePackage>20250831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HULIO is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA) (1.1): reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA., 2 Juvenile Idiopathic Arthritis (JIA) (1.2): reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older., 3 Psoriatic Arthritis (PsA) (1.3): reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA., 4 Ankylosing Spondylitis (AS) (1.4): reducing signs and symptoms in adult patients with active AS., 5 Crohn’s Disease (CD) (1.5): treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older., 6 Ulcerative Colitis (UC) (1.6): treatment of moderately to severely active ulcerative colitis in adult patients., 7 Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 8 Plaque Psoriasis (Ps) (1.7): treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate., 9 Hidradenitis Suppurativa (HS) (1.8): treatment of moderate to severe hidradenitis suppurativa in adult patients., 10 Uveitis (UV) (1.9): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients.</IndicationAndUsage>
<Description>Adalimumab-fkjp is a tumor necrosis factor blocker. Adalimumab-fkjp is a recombinant human IgG1 monoclonal antibody. Adalimumab-fkjp is produced by recombinant DNA technology in a mammalian cell expression system (Chinese Hamster Ovary Cells) and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. HULIO (adalimumab-fkjp) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled pen (HULIO Pen) or as a single-dose, 1 mL prefilled plastic syringe. Enclosed within the pen is a single- dose, 1 mL prefilled plastic syringe. The solution of HULIO is clear to slightly opalescent, colorless to pale brownish-yellow, with a pH of about 5.2. Each 40 mg/0.8 mL prefilled syringe or prefilled pen delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of HULIO contains adalimumab-fkjp (40 mg), methionine (0.60 mg), monosodium glutamate (1.50 mg), polysorbate 80 (0.80 mg), sorbitol (38.2 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of HULIO contains adalimumab-fkjp (20 mg), methionine (0.30 mg), monosodium glutamate (0.75 mg), polysorbate 80 (0.40 mg), sorbitol (19.1 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>49502-382-02</NDCCode>
<PackageDescription>2 TRAY in 1 KIT (49502-382-02) / 1 KIT in 1 TRAY * 2 TRAY in 1 KIT (49502-554-06) / 1 SYRINGE in 1 TRAY / .8 mL in 1 SYRINGE * 2 PACKET in 1 KIT (49502-556-06) / 1 mL in 1 PACKET</PackageDescription>
<NDC11Code>49502-0382-02</NDC11Code>
<ProductNDC>49502-382</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hulio</ProprietaryName>
<NonProprietaryName>Adalimumab-fkjp</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20230701</StartMarketingDate>
<EndMarketingDate>20250630</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761154</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230701</StartMarketingDatePackage>
<EndMarketingDatePackage>20250630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HULIO is a tumor necrosis factor (TNF) blocker indicated for: 1 Rheumatoid Arthritis (RA) (1.1): reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active RA., 2 Juvenile Idiopathic Arthritis (JIA) (1.2): reducing signs and symptoms of moderately to severely active polyarticular JIA in patients 2 years of age and older., 3 Psoriatic Arthritis (PsA) (1.3): reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active PsA., 4 Ankylosing Spondylitis (AS) (1.4): reducing signs and symptoms in adult patients with active AS., 5 Crohn’s Disease (CD) (1.5): treatment of moderately to severely active Crohn’s disease in adults and pediatric patients 6 years of age and older., 6 Ulcerative Colitis (UC) (1.6): treatment of moderately to severely active ulcerative colitis in adult patients., 7 Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers. , 8 Plaque Psoriasis (Ps) (1.7): treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate., 9 Hidradenitis Suppurativa (HS) (1.8): treatment of moderate to severe hidradenitis suppurativa in adult patients., 10 Uveitis (UV) (1.9): treatment of non-infectious intermediate, posterior, and panuveitis in adult patients.</IndicationAndUsage>
<Description>Adalimumab-fkjp is a tumor necrosis factor blocker. Adalimumab-fkjp is a recombinant human IgG1 monoclonal antibody. Adalimumab-fkjp is produced by recombinant DNA technology in a mammalian cell expression system (Chinese Hamster Ovary Cells) and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. HULIO (adalimumab-fkjp) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled pen (HULIO Pen) or as a single-dose, 1 mL prefilled plastic syringe. Enclosed within the pen is a single- dose, 1 mL prefilled plastic syringe. The solution of HULIO is clear to slightly opalescent, colorless to pale brownish-yellow, with a pH of about 5.2. Each 40 mg/0.8 mL prefilled syringe or prefilled pen delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of HULIO contains adalimumab-fkjp (40 mg), methionine (0.60 mg), monosodium glutamate (1.50 mg), polysorbate 80 (0.80 mg), sorbitol (38.2 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of HULIO contains adalimumab-fkjp (20 mg), methionine (0.30 mg), monosodium glutamate (0.75 mg), polysorbate 80 (0.40 mg), sorbitol (19.1 mg) and Water for Injection, USP. Hydrochloric acid is added as necessary to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>49502-393-80</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (49502-393-80) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>49502-0393-80</NDC11Code>
<ProductNDC>49502-393</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Insulin Glargine</ProprietaryName>
<NonProprietaryName>Insulin Glargine-yfgn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211116</StartMarketingDate>
<EndMarketingDate>20250228</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761201</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20211116</StartMarketingDatePackage>
<EndMarketingDatePackage>20250228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Insulin Glargine-yfgn is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. Insulin Glargine-yfgn is not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. Insulin Glargine-yfgn is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. Insulin Glargine-yfgn has a pH of approximately 4.</Description>
</NDC>
<NDC>
<NDCCode>49502-394-75</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (49502-394-75) / 3 mL in 1 SYRINGE (49502-394-71) </PackageDescription>
<NDC11Code>49502-0394-75</NDC11Code>
<ProductNDC>49502-394</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Insulin Glargine</ProprietaryName>
<NonProprietaryName>Insulin Glargine-yfgn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20211116</StartMarketingDate>
<EndMarketingDate>20250430</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761201</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20211116</StartMarketingDatePackage>
<EndMarketingDatePackage>20250430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Insulin Glargine-yfgn is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus. Limitations of Use. Insulin Glargine-yfgn is not recommended for the treatment of diabetic ketoacidosis.</IndicationAndUsage>
<Description>Insulin glargine-yfgn is a long-acting human insulin analog produced by recombinant DNA technology utilizing a recombinant yeast strain, Pichia pastoris. Insulin glargine-yfgn differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added to the C-terminus of the B-chain. Insulin glargine-yfgn has a molecular weight of 6063 Da. Insulin Glargine-yfgn is a sterile, clear and colorless solution for subcutaneous use in a 10 mL multiple-dose vial and a 3 mL single-patient-use prefilled pen. Vial. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), polysorbate-20 (20 mcg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. Prefilled pen. Each mL contains 100 units of insulin glargine-yfgn and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), zinc chloride (content adjusted to provide 30 mcg zinc ion), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. Insulin Glargine-yfgn has a pH of approximately 4.</Description>
</NDC>
<NDC>
<NDCCode>49502-401-09</NDCCode>
<PackageDescription>8 CAPSULE in 1 BOX, UNIT-DOSE (49502-401-09) </PackageDescription>
<NDC11Code>49502-0401-09</NDC11Code>
<ProductNDC>49502-401</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobi Podhaler</ProprietaryName>
<NonProprietaryName>Tobramycin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL; RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20210901</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA201688</ApplicationNumber>
<LabelerName>Viatris Specialty LLC</LabelerName>
<SubstanceName>TOBRAMYCIN</SubstanceName>
<StrengthNumber>28</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221004</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>TOBI Podhaler is indicated for the management of cystic fibrosis patients with Pseudomonas aeruginosa. Safety and efficacy have not been demonstrated in patients under the age of 6 years, patients with forced expiratory volume in 1 second (FEV1) <25% or >80% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)].</IndicationAndUsage>
<Description>TOBI Podhaler consists of a dry powder formulation of tobramycin for oral inhalation only with the Podhaler device. The inhalation powder is filled into clear, colorless hypromellose capsules. Each clear, colorless hypromellose capsule contains a spray dried powder of 28 mg of tobramycin active ingredient with 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), calcium chloride, and sulfuric acid (for pH adjustment). The active component of TOBI Podhaler is tobramycin. Tobramycin is an aminoglycoside antibiotic. Its chemical name is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine; its structural formula is. Tobramycin has a molecular weight of 467.52, and its empirical formula is C18H37N5O9. Tobramycin is a white to almost white powder; visually free from any foreign contaminants. Tobramycin is freely soluble in water, very slightly soluble in ethanol, and practically insoluble in chloroform and ether. The Podhaler device is a plastic device used to inhale the dry powder contained in the TOBI Podhaler capsule. Under standardized in vitro testing at a fixed flow rate of 60 L/min and volume of 2 L for 2 seconds, the Podhaler device has a target delivered dose of 102 mg of tobramycin from the mouthpiece (4 capsules per dose). Peak inspiratory flow rate and inhaled volumes were explored in 96 cystic fibrosis patients aged 6 years and older. Older patients with significant disease progression and associated decreases in forced expiratory volume (FEV1) and younger patients with inhaled volumes <1 L were able to generate inspiratory flow rates and volumes required to receive their medication when following the instructions for use. However, no pediatric patients aged 6 to 10 years with FEV1 less than 40% predicted were evaluated.</Description>
</NDC>
</NDCList>