{
"NDC": [
{
"NDCCode": "49591-051-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (49591-051-51) / 5 mL in 1 VIAL, GLASS (49591-051-05) ",
"NDC11Code": "49591-0051-51",
"ProductNDC": "49591-051",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Hepagam B",
"NonProprietaryName": "Human Hepatitis B Virus Immune Globulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20251001",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125035",
"LabelerName": "Kamada Ltd.",
"SubstanceName": "HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN",
"StrengthNumber": "312",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251001",
"SamplePackage": "N",
"IndicationAndUsage": "HepaGam B [Hepatitis B immune globulin intravenous (Human)] is an intravenous immune globulin indicated for the following.",
"Description": "HepaGam B, Hepatitis B Immune Globulin Intravenous (Human), is a solvent/detergent-treated sterile solution of purified gamma globulin containing anti-HBs. It is prepared from plasma donated by healthy, screened donors with high titers of anti-HBs that is purified by an anion-exchange column chromatography manufacturing method 9,10. HepaGam B is formulated as a 5% (50 milligrams per milliliter) protein solution with 10% maltose and 0.03% polysorbate 80 at pH 5.6. It is available in 1 milliliter and 5 milliliters single dose vials. The product appears as a clear to opalescent liquid. HepaGam B does not contain mercury. It contains no preservatives. This product is intended for single use. HepaGam B may be administered intravenously or intramuscularly dependent upon indication [see Dosage and Administration (2.)]. The source plasma used in the manufacture of this product was tested by FDA licensed Nucleic Acid testing (NAT) for HIV-1, HBV and HCV and found to be negative. Plasma also has been tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing and the limit for B19 in the manufacturing pool is set not to exceed 10 4international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent and detergent step (using tri-n-butyl phosphate and Triton ®X-100) is effective in the inactivation of enveloped viruses, such as hepatitis B, hepatitis C and HIV 11. Virus filtration, using a Planova ®20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses 12. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non–enveloped model viruses were validated in laboratory studies as summarized in Table 4. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process's ability for viral clearance in general. The product potency is expressed in international units by comparison to the World Health Organization (WHO) standard Hepatitis B Immune Globulin. Each vial contains greater than 312 international units per milliliter. The measured potency of each lot is stamped on the vial label [ see Dosage Forms and Strengths ( 3) ]."
},
{
"NDCCode": "49591-052-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (49591-052-51) / 1 mL in 1 VIAL, GLASS (49591-052-11) ",
"NDC11Code": "49591-0052-51",
"ProductNDC": "49591-052",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Hepagam B",
"NonProprietaryName": "Human Hepatitis B Virus Immune Globulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20251001",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125035",
"LabelerName": "Kamada Ltd.",
"SubstanceName": "HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN",
"StrengthNumber": "312",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251001",
"SamplePackage": "N",
"IndicationAndUsage": "HepaGam B [Hepatitis B immune globulin intravenous (Human)] is an intravenous immune globulin indicated for the following.",
"Description": "HepaGam B, Hepatitis B Immune Globulin Intravenous (Human), is a solvent/detergent-treated sterile solution of purified gamma globulin containing anti-HBs. It is prepared from plasma donated by healthy, screened donors with high titers of anti-HBs that is purified by an anion-exchange column chromatography manufacturing method 9,10. HepaGam B is formulated as a 5% (50 milligrams per milliliter) protein solution with 10% maltose and 0.03% polysorbate 80 at pH 5.6. It is available in 1 milliliter and 5 milliliters single dose vials. The product appears as a clear to opalescent liquid. HepaGam B does not contain mercury. It contains no preservatives. This product is intended for single use. HepaGam B may be administered intravenously or intramuscularly dependent upon indication [see Dosage and Administration (2.)]. The source plasma used in the manufacture of this product was tested by FDA licensed Nucleic Acid testing (NAT) for HIV-1, HBV and HCV and found to be negative. Plasma also has been tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing and the limit for B19 in the manufacturing pool is set not to exceed 10 4international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent and detergent step (using tri-n-butyl phosphate and Triton ®X-100) is effective in the inactivation of enveloped viruses, such as hepatitis B, hepatitis C and HIV 11. Virus filtration, using a Planova ®20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses 12. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non–enveloped model viruses were validated in laboratory studies as summarized in Table 4. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process's ability for viral clearance in general. The product potency is expressed in international units by comparison to the World Health Organization (WHO) standard Hepatitis B Immune Globulin. Each vial contains greater than 312 international units per milliliter. The measured potency of each lot is stamped on the vial label [ see Dosage Forms and Strengths ( 3) ]."
},
{
"NDCCode": "49591-126-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (49591-126-51) / 1.2 mL in 1 VIAL, GLASS (49591-126-11) ",
"NDC11Code": "49591-0126-51",
"ProductNDC": "49591-126",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Varizig",
"NonProprietaryName": "Human Varicella-zoster Immune Globulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20240301",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125430",
"LabelerName": "Kamada Ltd.",
"SubstanceName": "HUMAN VARICELLA-ZOSTER IMMUNE GLOBULIN",
"StrengthNumber": "125",
"StrengthUnit": "[iU]/1.2mL",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240301",
"SamplePackage": "N",
"IndicationAndUsage": "VARIZIG ®[Varicella Zoster Immune Globulin (Human)] is indicated for post-exposure prophylaxis of varicella in high risk individuals. High risk groups include: : 1 immunocompromised children and adults,, 2 newborns of mothers with varicella shortly before or after delivery,, 3 premature infants,, 4 neonates and infants less than one year of age,, 5 adults without evidence of immunity,, 6 pregnant women.",
"Description": "VARIZIG [Varicella Zoster Immune Globulin (Human)] is a solvent/detergent-treated sterile liquid preparation of purified human immune globulin G (IgG) containing antibodies to varicella zoster virus (anti-VZV). VZV is the causative agent of chickenpox. VARIZIG is prepared from plasma donated by healthy, screened donors with high titers of antibodies to VZV, which is purified by an anion-exchange column chromatography manufacturing method. This donor selection process includes donors with high anti-VZV titers due to recent natural infection by VZV, or due to recurrent zoster infection (shingles). VARIZIG is intended for single use and should be administered intramuscularly [see 2DOSAGE AND ADMINISTRATION]. The product potency is expressed in international units by comparison to the World Health Organization (WHO) international reference preparation for anti-VZV immune globulin. Each vial contains 125 international units of anti-VZV. VARIZIG is formulated with 10% maltose and 0.03% polysorbate 80. VARIZIG has a pH of 5.0 – 6.5 and contains no preservative. The presence of anti-Protein S antibodies has been reported to arise transiently in patients after VZV infection (4). Low levels of anti-Protein S antibodies have been reported in VARIZIG. The source plasma used in the manufacture of this product was tested by FDA licensed nucleic acid testing (NAT) for human immunodeficiency virus-1 (HIV-1), hepatitis B virus (HBV) and hepatitis C virus (HCV) and found to be negative. Plasma also was tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing; the limit for B19 in the manufacturing pool is set not to exceed 10 4international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent/detergent step (using tri-n-butyl phosphate and Triton ®X-100) is effective in the inactivation of enveloped viruses, such as HBV, HCV and HIV-1. Virus filtration, using a Planova ®20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 2. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process's ability for viral clearance in general."
},
{
"NDCCode": "49591-300-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (49591-300-51) / 13 mL in 1 VIAL, GLASS (49591-300-13) ",
"NDC11Code": "49591-0300-51",
"ProductNDC": "49591-300",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Winrho Sdf",
"NonProprietaryName": "Human Rho(d) Immune Globulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230801",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103649",
"LabelerName": "Kamada Ltd.",
"SubstanceName": "HUMAN RHO(D) IMMUNE GLOBULIN",
"StrengthNumber": "15000",
"StrengthUnit": "[iU]/13mL",
"Pharm_Classes": "Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230801",
"SamplePackage": "N",
"IndicationAndUsage": "WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.",
"Description": "WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA."
},
{
"NDCCode": "49591-310-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (49591-310-51) / 4.4 mL in 1 VIAL, GLASS (49591-310-04) ",
"NDC11Code": "49591-0310-51",
"ProductNDC": "49591-310",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Winrho Sdf",
"NonProprietaryName": "Human Rho(d) Immune Globulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230801",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103649",
"LabelerName": "Kamada Ltd.",
"SubstanceName": "HUMAN RHO(D) IMMUNE GLOBULIN",
"StrengthNumber": "5000",
"StrengthUnit": "[iU]/4.4mL",
"Pharm_Classes": "Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230801",
"SamplePackage": "N",
"IndicationAndUsage": "WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.",
"Description": "WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA."
},
{
"NDCCode": "49591-330-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (49591-330-51) / 1.3 mL in 1 VIAL, GLASS (49591-330-11) ",
"NDC11Code": "49591-0330-51",
"ProductNDC": "49591-330",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Winrho Sdf",
"NonProprietaryName": "Human Rho(d) Immune Globulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230801",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103649",
"LabelerName": "Kamada Ltd.",
"SubstanceName": "HUMAN RHO(D) IMMUNE GLOBULIN",
"StrengthNumber": "1500",
"StrengthUnit": "[iU]/1.3mL",
"Pharm_Classes": "Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230801",
"SamplePackage": "N",
"IndicationAndUsage": "WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.",
"Description": "WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA."
},
{
"NDCCode": "49591-350-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (49591-350-51) / 2.2 mL in 1 VIAL, GLASS (49591-350-02) ",
"NDC11Code": "49591-0350-51",
"ProductNDC": "49591-350",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Winrho Sdf",
"NonProprietaryName": "Human Rho(d) Immune Globulin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20230801",
"EndMarketingDate": "20260531",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103649",
"LabelerName": "Kamada Ltd.",
"SubstanceName": "HUMAN RHO(D) IMMUNE GLOBULIN",
"StrengthNumber": "2500",
"StrengthUnit": "[iU]/2.2mL",
"Pharm_Classes": "Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230801",
"EndMarketingDatePackage": "20260531",
"SamplePackage": "N",
"IndicationAndUsage": "WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.",
"Description": "WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA."
},
{
"NDCCode": "49591-532-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (49591-532-51) / 50 mL in 1 VIAL, GLASS (49591-532-50) ",
"NDC11Code": "49591-0532-51",
"ProductNDC": "49591-532",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Cytogam",
"NonProprietaryName": "Human Cytomegalovirus Immune Globulin",
"DosageFormName": "LIQUID",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103189",
"LabelerName": "Kamada Ltd.",
"SubstanceName": "HUMAN CYTOMEGALOVIRUS IMMUNE GLOBULIN",
"StrengthNumber": "2500",
"StrengthUnit": "mg/50mL",
"Pharm_Classes": "Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230601",
"SamplePackage": "N"
},
{
"NDCCode": "11527-051-51",
"PackageDescription": "1 TUBE in 1 CARTON (11527-051-51) / 14 g in 1 TUBE",
"NDC11Code": "11527-0051-51",
"ProductNDC": "11527-051",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Tolnaftate",
"NonProprietaryName": "Tolnaftate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20091007",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M005",
"LabelerName": "Sheffield Pharmaceuticals LLC",
"SubstanceName": "TOLNAFTATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2025-02-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20091007",
"SamplePackage": "N",
"IndicationAndUsage": "Cures most athlete's foot (tinea pedis), jock itch (tinea cruris) and ringworm (tinea corporis). Relieves the itching, irratation, redness, scaling and discomfort which can accompany these conditions."
},
{
"NDCCode": "51655-051-51",
"PackageDescription": "40 TABLET in 1 BOTTLE, DISPENSING (51655-051-51)",
"NDC11Code": "51655-0051-51",
"ProductNDC": "51655-051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078558",
"LabelerName": "Northwind Pharmaceuticals",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen Tablets, USP and other treatment options before deciding to use Ibuprofen Tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen Tablets, USP are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen Tablets, USP are indicated for relief of mild to moderate pain. Ibuprofen Tablets, USP are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen Tablets, USP in children have not been conducted."
},
{
"NDCCode": "60289-051-51",
"PackageDescription": "60 mL in 1 TUBE (60289-051-51)",
"NDC11Code": "60289-0051-51",
"ProductNDC": "60289-051",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ahava Active Deadsea Minerals",
"ProprietaryNameSuffix": "Mineral Suncare Spf 50 Face",
"NonProprietaryName": "Octocrylene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "AHAVA - Dead Sea Laboratories Ltd.",
"SubstanceName": "OCTOCRYLENE; ENSULIZOLE; OCTISALATE; AVOBENZONE; TITANIUM DIOXIDE",
"StrengthNumber": "6; .6; 3; 1.8; 3",
"StrengthUnit": "mL/60mL; mL/60mL; mL/60mL; mL/60mL; mL/60mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "61755-051-51",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61755-051-51) / .07 mL in 1 VIAL, SINGLE-DOSE (61755-051-50) ",
"NDC11Code": "61755-0051-51",
"ProductNDC": "61755-051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eylea Hd",
"NonProprietaryName": "Aflibercept",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVITREAL",
"StartMarketingDate": "20230818",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761355",
"LabelerName": "Regeneron Pharmaceuticals, Inc",
"SubstanceName": "AFLIBERCEPT",
"StrengthNumber": "8",
"StrengthUnit": "mg/.07mL",
"Pharm_Classes": "Vascular Endothelial Growth Factor Inhibitor [EPC], Vascular Endothelial Growth Factor Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230818",
"SamplePackage": "N",
"IndicationAndUsage": "EYLEA HD is indicated for the treatment of.",
"Description": "Aflibercept is a recombinant fusion protein consisting of portions of human VEGF receptors 1 and 2 extracellular domains fused to the Fc portion of human IgG1 formulated as an iso-osmotic solution for intravitreal administration. Aflibercept is a dimeric glycoprotein and contains glycosylation, constituting an additional 15% of the total molecular mass, resulting in a total molecular weight of 115 kDa. Aflibercept is produced in recombinant Chinese hamster ovary (CHO) cells. EYLEA HD (aflibercept) injection is a sterile, clear to slightly opalescent, and colorless to pale yellow solution. EYLEA HD is supplied as a sterile, aqueous solution for intravitreal injection in a single-dose glass vial designed to deliver 0.07 mL (70 microliters) of solution containing 8 mg of aflibercept in a buffer containing arginine hydrochloride (0.737 mg), histidine (0.04 mg), L-histidine hydrochloride monohydrate (0.093 mg), polysorbate 20 (0.021 mg), sucrose (3.5 mg) and water for injection with a pH of 5.8. EYLEA HD does not contain an anti-microbial preservative."
},
{
"NDCCode": "70257-051-51",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (70257-051-51) > 5 mL in 1 VIAL, GLASS (70257-051-05) ",
"NDC11Code": "70257-0051-51",
"ProductNDC": "70257-051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hepagam B",
"NonProprietaryName": "Hepatitis B Immune Globulin Intravenous (human)",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190301",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125035",
"LabelerName": "Saol Therapeutics Inc.",
"SubstanceName": "HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN",
"StrengthNumber": "312",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190301",
"SamplePackage": "N",
"IndicationAndUsage": "HepaGam B [Hepatitis B immune globulin intravenous (Human)] is an intravenous immune globulin indicated for the following.",
"Description": "HepaGam B, Hepatitis B Immune Globulin Intravenous (Human), is a solvent/detergent-treated sterile solution of purified gamma globulin containing anti-HBs. It is prepared from plasma donated by healthy, screened donors with high titers of anti-HBs that is purified by an anion-exchange column chromatography manufacturing method9,10. HepaGam B is formulated as a 5% (50 milligrams per milliliter) protein solution with 10% maltose and 0.03% polysorbate 80 at pH 5.6. It is available in 1 milliliter and 5 milliliters single dose vials. The product appears as a clear to opalescent liquid. HepaGam B does not contain mercury. It contains no preservatives. This product is intended for single use. HepaGam B may be administered intravenously or intramuscularly dependent upon indication [see Dosage and Administration (2.)]. The source plasma used in the manufacture of this product was tested by FDA licensed Nucleic Acid testing (NAT) for HIV-1, HBV and HCV and found to be negative. Plasma also has been tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing and the limit for B19 in the manufacturing pool is set not to exceed 104 international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent and detergent step (using tri-n-butyl phosphate and Triton® X-100) is effective in the inactivation of enveloped viruses, such as hepatitis B, hepatitis C and HIV11. Virus filtration, using a Planova® 20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses12. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non–enveloped model viruses were validated in laboratory studies as summarized in Table 4. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process’s ability for viral clearance in general. The product potency is expressed in international units by comparison to the World Health Organization (WHO) standard Hepatitis B Immune Globulin. Each vial contains greater than 312 international units per milliliter. The measured potency of each lot is stamped on the vial label [see Dosage Forms and Strengths (3)]."
},
{
"NDCCode": "0378-0630-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0378-0630-01) ",
"NDC11Code": "00378-0630-01",
"ProductNDC": "0378-0630",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0630-88",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (0378-0630-88) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "00378-0630-88",
"ProductNDC": "0378-0630",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0630-91",
"PackageDescription": "60 TABLET in 1 BOTTLE (0378-0630-91) ",
"NDC11Code": "00378-0630-91",
"ProductNDC": "0378-0630",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0631-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0378-0631-01) ",
"NDC11Code": "00378-0631-01",
"ProductNDC": "0378-0631",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0631-88",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (0378-0631-88) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "00378-0631-88",
"ProductNDC": "0378-0631",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0631-91",
"PackageDescription": "60 TABLET in 1 BOTTLE (0378-0631-91) ",
"NDC11Code": "00378-0631-91",
"ProductNDC": "0378-0631",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0632-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0378-0632-01) ",
"NDC11Code": "00378-0632-01",
"ProductNDC": "0378-0632",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0632-88",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (0378-0632-88) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "00378-0632-88",
"ProductNDC": "0378-0632",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0632-91",
"PackageDescription": "60 TABLET in 1 BOTTLE (0378-0632-91) ",
"NDC11Code": "00378-0632-91",
"ProductNDC": "0378-0632",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0633-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0378-0633-01) ",
"NDC11Code": "00378-0633-01",
"ProductNDC": "0378-0633",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0633-88",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (0378-0633-88) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "00378-0633-88",
"ProductNDC": "0378-0633",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0633-91",
"PackageDescription": "60 TABLET in 1 BOTTLE (0378-0633-91) ",
"NDC11Code": "00378-0633-91",
"ProductNDC": "0378-0633",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0634-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0378-0634-01) ",
"NDC11Code": "00378-0634-01",
"ProductNDC": "0378-0634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0634-88",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (0378-0634-88) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "00378-0634-88",
"ProductNDC": "0378-0634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0634-91",
"PackageDescription": "60 TABLET in 1 BOTTLE (0378-0634-91) ",
"NDC11Code": "00378-0634-91",
"ProductNDC": "0378-0634",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0635-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0378-0635-01) ",
"NDC11Code": "00378-0635-01",
"ProductNDC": "0378-0635",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
},
{
"NDCCode": "0378-0635-88",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (0378-0635-88) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "00378-0635-88",
"ProductNDC": "0378-0635",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Iloperidone",
"NonProprietaryName": "Iloperidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207231",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ILOPERIDONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170320",
"SamplePackage": "N",
"IndicationAndUsage": "Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .",
"Description": "Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with \"050\",\"051\",\"052\",\"053\",\"054\",\"055\",or \"056\"on one side and plain on other side."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49591-051-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (49591-051-51) / 5 mL in 1 VIAL, GLASS (49591-051-05) </PackageDescription>
<NDC11Code>49591-0051-51</NDC11Code>
<ProductNDC>49591-051</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Hepagam B</ProprietaryName>
<NonProprietaryName>Human Hepatitis B Virus Immune Globulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20251001</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125035</ApplicationNumber>
<LabelerName>Kamada Ltd.</LabelerName>
<SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>312</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HepaGam B [Hepatitis B immune globulin intravenous (Human)] is an intravenous immune globulin indicated for the following.</IndicationAndUsage>
<Description>HepaGam B, Hepatitis B Immune Globulin Intravenous (Human), is a solvent/detergent-treated sterile solution of purified gamma globulin containing anti-HBs. It is prepared from plasma donated by healthy, screened donors with high titers of anti-HBs that is purified by an anion-exchange column chromatography manufacturing method 9,10. HepaGam B is formulated as a 5% (50 milligrams per milliliter) protein solution with 10% maltose and 0.03% polysorbate 80 at pH 5.6. It is available in 1 milliliter and 5 milliliters single dose vials. The product appears as a clear to opalescent liquid. HepaGam B does not contain mercury. It contains no preservatives. This product is intended for single use. HepaGam B may be administered intravenously or intramuscularly dependent upon indication [see Dosage and Administration (2.)]. The source plasma used in the manufacture of this product was tested by FDA licensed Nucleic Acid testing (NAT) for HIV-1, HBV and HCV and found to be negative. Plasma also has been tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing and the limit for B19 in the manufacturing pool is set not to exceed 10 4international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent and detergent step (using tri-n-butyl phosphate and Triton ®X-100) is effective in the inactivation of enveloped viruses, such as hepatitis B, hepatitis C and HIV 11. Virus filtration, using a Planova ®20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses 12. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non–enveloped model viruses were validated in laboratory studies as summarized in Table 4. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process's ability for viral clearance in general. The product potency is expressed in international units by comparison to the World Health Organization (WHO) standard Hepatitis B Immune Globulin. Each vial contains greater than 312 international units per milliliter. The measured potency of each lot is stamped on the vial label [ see Dosage Forms and Strengths ( 3) ].</Description>
</NDC>
<NDC>
<NDCCode>49591-052-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (49591-052-51) / 1 mL in 1 VIAL, GLASS (49591-052-11) </PackageDescription>
<NDC11Code>49591-0052-51</NDC11Code>
<ProductNDC>49591-052</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Hepagam B</ProprietaryName>
<NonProprietaryName>Human Hepatitis B Virus Immune Globulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20251001</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125035</ApplicationNumber>
<LabelerName>Kamada Ltd.</LabelerName>
<SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>312</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HepaGam B [Hepatitis B immune globulin intravenous (Human)] is an intravenous immune globulin indicated for the following.</IndicationAndUsage>
<Description>HepaGam B, Hepatitis B Immune Globulin Intravenous (Human), is a solvent/detergent-treated sterile solution of purified gamma globulin containing anti-HBs. It is prepared from plasma donated by healthy, screened donors with high titers of anti-HBs that is purified by an anion-exchange column chromatography manufacturing method 9,10. HepaGam B is formulated as a 5% (50 milligrams per milliliter) protein solution with 10% maltose and 0.03% polysorbate 80 at pH 5.6. It is available in 1 milliliter and 5 milliliters single dose vials. The product appears as a clear to opalescent liquid. HepaGam B does not contain mercury. It contains no preservatives. This product is intended for single use. HepaGam B may be administered intravenously or intramuscularly dependent upon indication [see Dosage and Administration (2.)]. The source plasma used in the manufacture of this product was tested by FDA licensed Nucleic Acid testing (NAT) for HIV-1, HBV and HCV and found to be negative. Plasma also has been tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing and the limit for B19 in the manufacturing pool is set not to exceed 10 4international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent and detergent step (using tri-n-butyl phosphate and Triton ®X-100) is effective in the inactivation of enveloped viruses, such as hepatitis B, hepatitis C and HIV 11. Virus filtration, using a Planova ®20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses 12. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non–enveloped model viruses were validated in laboratory studies as summarized in Table 4. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process's ability for viral clearance in general. The product potency is expressed in international units by comparison to the World Health Organization (WHO) standard Hepatitis B Immune Globulin. Each vial contains greater than 312 international units per milliliter. The measured potency of each lot is stamped on the vial label [ see Dosage Forms and Strengths ( 3) ].</Description>
</NDC>
<NDC>
<NDCCode>49591-126-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (49591-126-51) / 1.2 mL in 1 VIAL, GLASS (49591-126-11) </PackageDescription>
<NDC11Code>49591-0126-51</NDC11Code>
<ProductNDC>49591-126</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Varizig</ProprietaryName>
<NonProprietaryName>Human Varicella-zoster Immune Globulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20240301</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125430</ApplicationNumber>
<LabelerName>Kamada Ltd.</LabelerName>
<SubstanceName>HUMAN VARICELLA-ZOSTER IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>[iU]/1.2mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VARIZIG ®[Varicella Zoster Immune Globulin (Human)] is indicated for post-exposure prophylaxis of varicella in high risk individuals. High risk groups include: : 1 immunocompromised children and adults,, 2 newborns of mothers with varicella shortly before or after delivery,, 3 premature infants,, 4 neonates and infants less than one year of age,, 5 adults without evidence of immunity,, 6 pregnant women.</IndicationAndUsage>
<Description>VARIZIG [Varicella Zoster Immune Globulin (Human)] is a solvent/detergent-treated sterile liquid preparation of purified human immune globulin G (IgG) containing antibodies to varicella zoster virus (anti-VZV). VZV is the causative agent of chickenpox. VARIZIG is prepared from plasma donated by healthy, screened donors with high titers of antibodies to VZV, which is purified by an anion-exchange column chromatography manufacturing method. This donor selection process includes donors with high anti-VZV titers due to recent natural infection by VZV, or due to recurrent zoster infection (shingles). VARIZIG is intended for single use and should be administered intramuscularly [see 2DOSAGE AND ADMINISTRATION]. The product potency is expressed in international units by comparison to the World Health Organization (WHO) international reference preparation for anti-VZV immune globulin. Each vial contains 125 international units of anti-VZV. VARIZIG is formulated with 10% maltose and 0.03% polysorbate 80. VARIZIG has a pH of 5.0 – 6.5 and contains no preservative. The presence of anti-Protein S antibodies has been reported to arise transiently in patients after VZV infection (4). Low levels of anti-Protein S antibodies have been reported in VARIZIG. The source plasma used in the manufacture of this product was tested by FDA licensed nucleic acid testing (NAT) for human immunodeficiency virus-1 (HIV-1), hepatitis B virus (HBV) and hepatitis C virus (HCV) and found to be negative. Plasma also was tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing; the limit for B19 in the manufacturing pool is set not to exceed 10 4international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent/detergent step (using tri-n-butyl phosphate and Triton ®X-100) is effective in the inactivation of enveloped viruses, such as HBV, HCV and HIV-1. Virus filtration, using a Planova ®20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 2. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process's ability for viral clearance in general.</Description>
</NDC>
<NDC>
<NDCCode>49591-300-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (49591-300-51) / 13 mL in 1 VIAL, GLASS (49591-300-13) </PackageDescription>
<NDC11Code>49591-0300-51</NDC11Code>
<ProductNDC>49591-300</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Winrho Sdf</ProprietaryName>
<NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230801</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103649</ApplicationNumber>
<LabelerName>Kamada Ltd.</LabelerName>
<SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>15000</StrengthNumber>
<StrengthUnit>[iU]/13mL</StrengthUnit>
<Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.</IndicationAndUsage>
<Description>WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA.</Description>
</NDC>
<NDC>
<NDCCode>49591-310-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (49591-310-51) / 4.4 mL in 1 VIAL, GLASS (49591-310-04) </PackageDescription>
<NDC11Code>49591-0310-51</NDC11Code>
<ProductNDC>49591-310</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Winrho Sdf</ProprietaryName>
<NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230801</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103649</ApplicationNumber>
<LabelerName>Kamada Ltd.</LabelerName>
<SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[iU]/4.4mL</StrengthUnit>
<Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.</IndicationAndUsage>
<Description>WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA.</Description>
</NDC>
<NDC>
<NDCCode>49591-330-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (49591-330-51) / 1.3 mL in 1 VIAL, GLASS (49591-330-11) </PackageDescription>
<NDC11Code>49591-0330-51</NDC11Code>
<ProductNDC>49591-330</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Winrho Sdf</ProprietaryName>
<NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230801</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103649</ApplicationNumber>
<LabelerName>Kamada Ltd.</LabelerName>
<SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>1500</StrengthNumber>
<StrengthUnit>[iU]/1.3mL</StrengthUnit>
<Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.</IndicationAndUsage>
<Description>WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA.</Description>
</NDC>
<NDC>
<NDCCode>49591-350-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (49591-350-51) / 2.2 mL in 1 VIAL, GLASS (49591-350-02) </PackageDescription>
<NDC11Code>49591-0350-51</NDC11Code>
<ProductNDC>49591-350</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Winrho Sdf</ProprietaryName>
<NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20230801</StartMarketingDate>
<EndMarketingDate>20260531</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103649</ApplicationNumber>
<LabelerName>Kamada Ltd.</LabelerName>
<SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>2500</StrengthNumber>
<StrengthUnit>[iU]/2.2mL</StrengthUnit>
<Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230801</StartMarketingDatePackage>
<EndMarketingDatePackage>20260531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>WinRho ®SDF is a Rh o(D) Immune Globulin Intravenous (Human) (anti-D) product that is indicated for the treatment of ITP in Rh o(D)-positive patients and for the suppression of Rh isoimmunization in non-sensitized Rh o(D)-negative patients.</IndicationAndUsage>
<Description>WinRho ®SDF is a sterile, liquid gamma globulin (IgG) fraction containing antibodies to the Rh o(D) antigen (D antigen). WinRho ®SDF is to be administered intravenously for the treatment of ITP and either intravenously or intramuscularly for the suppression of Rh isoimmunization. WinRho ®SDF is prepared from human plasma by an anion-exchange column chromatography method. The manufacturing process includes two steps implemented specifically for viral clearance. The solvent detergent treatment step (using tri-n-butyl phosphate and octoxynol) is effective in inactivating lipid enveloped viruses such as hepatitis B, hepatitis C, and HIV. Virus filtration, using a 20N virus filter, is effective in the removal of some non-lipid enveloped viruses. These two processes are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses, respectively. In addition to the two specific steps, the anion-exchange chromatography step contributes to the removal of small non-lipid enveloped viruses. The inactivation and reduction of known enveloped and non-enveloped model viruses were validated in laboratory studies as summarized in Table 6. The product potency is expressed in international units (IU) by comparison to the World Health Organization (WHO) standard. In the past, a full dose of Rh o(D) Immune Globulin (Human) has traditionally been referred to as a “300 microgram (mcg)” dose. Potency and dosing recommendations are now expressed in IU by comparison to the WHO anti-Rh o(D) standard. The conversion of mcg to IU is: 1 mcg = 5 IU. A 1,500 IU (300 mcg) vial contains sufficient anti-Rh o(D) to effectively suppress the immunizing potential of approximately 17 mL of Rh o(D) (D-positive) RBCs. The liquid formulation is stabilized with 10% maltose and 0.03% polysorbate 80. There are no preservatives in the formulation. WinRho ®SDF does not contain mercury. This product contains ≤ 40 mcg/mL IgA.</Description>
</NDC>
<NDC>
<NDCCode>49591-532-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (49591-532-51) / 50 mL in 1 VIAL, GLASS (49591-532-50) </PackageDescription>
<NDC11Code>49591-0532-51</NDC11Code>
<ProductNDC>49591-532</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Cytogam</ProprietaryName>
<NonProprietaryName>Human Cytomegalovirus Immune Globulin</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103189</ApplicationNumber>
<LabelerName>Kamada Ltd.</LabelerName>
<SubstanceName>HUMAN CYTOMEGALOVIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>2500</StrengthNumber>
<StrengthUnit>mg/50mL</StrengthUnit>
<Pharm_Classes>Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>11527-051-51</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (11527-051-51) / 14 g in 1 TUBE</PackageDescription>
<NDC11Code>11527-0051-51</NDC11Code>
<ProductNDC>11527-051</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Tolnaftate</ProprietaryName>
<NonProprietaryName>Tolnaftate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20091007</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M005</ApplicationNumber>
<LabelerName>Sheffield Pharmaceuticals LLC</LabelerName>
<SubstanceName>TOLNAFTATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-02-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cures most athlete's foot (tinea pedis), jock itch (tinea cruris) and ringworm (tinea corporis). Relieves the itching, irratation, redness, scaling and discomfort which can accompany these conditions.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51655-051-51</NDCCode>
<PackageDescription>40 TABLET in 1 BOTTLE, DISPENSING (51655-051-51)</PackageDescription>
<NDC11Code>51655-0051-51</NDC11Code>
<ProductNDC>51655-051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078558</ApplicationNumber>
<LabelerName>Northwind Pharmaceuticals</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen Tablets, USP and other treatment options before deciding to use Ibuprofen Tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen Tablets, USP are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen Tablets, USP are indicated for relief of mild to moderate pain. Ibuprofen Tablets, USP are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen Tablets, USP in children have not been conducted.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>60289-051-51</NDCCode>
<PackageDescription>60 mL in 1 TUBE (60289-051-51)</PackageDescription>
<NDC11Code>60289-0051-51</NDC11Code>
<ProductNDC>60289-051</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ahava Active Deadsea Minerals</ProprietaryName>
<ProprietaryNameSuffix>Mineral Suncare Spf 50 Face</ProprietaryNameSuffix>
<NonProprietaryName>Octocrylene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>AHAVA - Dead Sea Laboratories Ltd.</LabelerName>
<SubstanceName>OCTOCRYLENE; ENSULIZOLE; OCTISALATE; AVOBENZONE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>6; .6; 3; 1.8; 3</StrengthNumber>
<StrengthUnit>mL/60mL; mL/60mL; mL/60mL; mL/60mL; mL/60mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>61755-051-51</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61755-051-51) / .07 mL in 1 VIAL, SINGLE-DOSE (61755-051-50) </PackageDescription>
<NDC11Code>61755-0051-51</NDC11Code>
<ProductNDC>61755-051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eylea Hd</ProprietaryName>
<NonProprietaryName>Aflibercept</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVITREAL</RouteName>
<StartMarketingDate>20230818</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761355</ApplicationNumber>
<LabelerName>Regeneron Pharmaceuticals, Inc</LabelerName>
<SubstanceName>AFLIBERCEPT</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/.07mL</StrengthUnit>
<Pharm_Classes>Vascular Endothelial Growth Factor Inhibitor [EPC], Vascular Endothelial Growth Factor Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230818</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EYLEA HD is indicated for the treatment of.</IndicationAndUsage>
<Description>Aflibercept is a recombinant fusion protein consisting of portions of human VEGF receptors 1 and 2 extracellular domains fused to the Fc portion of human IgG1 formulated as an iso-osmotic solution for intravitreal administration. Aflibercept is a dimeric glycoprotein and contains glycosylation, constituting an additional 15% of the total molecular mass, resulting in a total molecular weight of 115 kDa. Aflibercept is produced in recombinant Chinese hamster ovary (CHO) cells. EYLEA HD (aflibercept) injection is a sterile, clear to slightly opalescent, and colorless to pale yellow solution. EYLEA HD is supplied as a sterile, aqueous solution for intravitreal injection in a single-dose glass vial designed to deliver 0.07 mL (70 microliters) of solution containing 8 mg of aflibercept in a buffer containing arginine hydrochloride (0.737 mg), histidine (0.04 mg), L-histidine hydrochloride monohydrate (0.093 mg), polysorbate 20 (0.021 mg), sucrose (3.5 mg) and water for injection with a pH of 5.8. EYLEA HD does not contain an anti-microbial preservative.</Description>
</NDC>
<NDC>
<NDCCode>70257-051-51</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (70257-051-51) > 5 mL in 1 VIAL, GLASS (70257-051-05) </PackageDescription>
<NDC11Code>70257-0051-51</NDC11Code>
<ProductNDC>70257-051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hepagam B</ProprietaryName>
<NonProprietaryName>Hepatitis B Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190301</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125035</ApplicationNumber>
<LabelerName>Saol Therapeutics Inc.</LabelerName>
<SubstanceName>HUMAN HEPATITIS B VIRUS IMMUNE GLOBULIN</SubstanceName>
<StrengthNumber>312</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Human Immunoglobulin [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE], Virus Neutralization [MoA], Virus-specific Hyperimmune Globulins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HepaGam B [Hepatitis B immune globulin intravenous (Human)] is an intravenous immune globulin indicated for the following.</IndicationAndUsage>
<Description>HepaGam B, Hepatitis B Immune Globulin Intravenous (Human), is a solvent/detergent-treated sterile solution of purified gamma globulin containing anti-HBs. It is prepared from plasma donated by healthy, screened donors with high titers of anti-HBs that is purified by an anion-exchange column chromatography manufacturing method9,10. HepaGam B is formulated as a 5% (50 milligrams per milliliter) protein solution with 10% maltose and 0.03% polysorbate 80 at pH 5.6. It is available in 1 milliliter and 5 milliliters single dose vials. The product appears as a clear to opalescent liquid. HepaGam B does not contain mercury. It contains no preservatives. This product is intended for single use. HepaGam B may be administered intravenously or intramuscularly dependent upon indication [see Dosage and Administration (2.)]. The source plasma used in the manufacture of this product was tested by FDA licensed Nucleic Acid testing (NAT) for HIV-1, HBV and HCV and found to be negative. Plasma also has been tested by in-process NAT for hepatitis A virus (HAV) and parvovirus B19 (B19) via minipool testing and the limit for B19 in the manufacturing pool is set not to exceed 104 international units of B19 DNA per milliliter. The manufacturing process contains two steps implemented specifically for virus clearance. The solvent and detergent step (using tri-n-butyl phosphate and Triton® X-100) is effective in the inactivation of enveloped viruses, such as hepatitis B, hepatitis C and HIV11. Virus filtration, using a Planova® 20N virus filter, is effective for the removal of viruses based on their size, including some non-enveloped viruses12. These two viral clearance steps are designed to increase product safety by reducing the risk of transmission of enveloped and non-enveloped viruses. In addition to these two specific steps, the process step of anion-exchange chromatography was identified as contributing to the overall viral clearance capacity for small non-enveloped viruses. The inactivation and reduction of known enveloped and non–enveloped model viruses were validated in laboratory studies as summarized in Table 4. The viruses employed for spiking studies were selected to represent those viruses that are potential contaminants in the product, and to represent a wide range of physiochemical properties in order to challenge the manufacturing process’s ability for viral clearance in general. The product potency is expressed in international units by comparison to the World Health Organization (WHO) standard Hepatitis B Immune Globulin. Each vial contains greater than 312 international units per milliliter. The measured potency of each lot is stamped on the vial label [see Dosage Forms and Strengths (3)].</Description>
</NDC>
<NDC>
<NDCCode>0378-0630-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0378-0630-01) </PackageDescription>
<NDC11Code>00378-0630-01</NDC11Code>
<ProductNDC>0378-0630</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0630-88</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (0378-0630-88) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00378-0630-88</NDC11Code>
<ProductNDC>0378-0630</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0630-91</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (0378-0630-91) </PackageDescription>
<NDC11Code>00378-0630-91</NDC11Code>
<ProductNDC>0378-0630</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0631-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0378-0631-01) </PackageDescription>
<NDC11Code>00378-0631-01</NDC11Code>
<ProductNDC>0378-0631</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0631-88</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (0378-0631-88) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00378-0631-88</NDC11Code>
<ProductNDC>0378-0631</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0631-91</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (0378-0631-91) </PackageDescription>
<NDC11Code>00378-0631-91</NDC11Code>
<ProductNDC>0378-0631</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0632-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0378-0632-01) </PackageDescription>
<NDC11Code>00378-0632-01</NDC11Code>
<ProductNDC>0378-0632</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0632-88</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (0378-0632-88) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00378-0632-88</NDC11Code>
<ProductNDC>0378-0632</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0632-91</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (0378-0632-91) </PackageDescription>
<NDC11Code>00378-0632-91</NDC11Code>
<ProductNDC>0378-0632</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0633-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0378-0633-01) </PackageDescription>
<NDC11Code>00378-0633-01</NDC11Code>
<ProductNDC>0378-0633</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0633-88</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (0378-0633-88) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00378-0633-88</NDC11Code>
<ProductNDC>0378-0633</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0633-91</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (0378-0633-91) </PackageDescription>
<NDC11Code>00378-0633-91</NDC11Code>
<ProductNDC>0378-0633</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0634-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0378-0634-01) </PackageDescription>
<NDC11Code>00378-0634-01</NDC11Code>
<ProductNDC>0378-0634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0634-88</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (0378-0634-88) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00378-0634-88</NDC11Code>
<ProductNDC>0378-0634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0634-91</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (0378-0634-91) </PackageDescription>
<NDC11Code>00378-0634-91</NDC11Code>
<ProductNDC>0378-0634</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0635-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0378-0635-01) </PackageDescription>
<NDC11Code>00378-0635-01</NDC11Code>
<ProductNDC>0378-0635</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
<NDC>
<NDCCode>0378-0635-88</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (0378-0635-88) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00378-0635-88</NDC11Code>
<ProductNDC>0378-0635</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Iloperidone</ProprietaryName>
<NonProprietaryName>Iloperidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207231</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ILOPERIDONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Iloperidone tablets is indicated for: 1 Treatment of schizophrenia in adults [see Clinical Studies ( 14.1)]. .</IndicationAndUsage>
<Description>Iloperidone is an atypical antipsychotic belonging to the chemical class of piperidinyl-benzisoxazole derivatives. Its chemical name is 4'-[3-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidino]propoxy]-3'-methoxyacetophenone. Its molecular formula is C 24H 27FN 2O 4and its molecular weight is 426.48. The structural formula is:. Iloperidone is a white to off-white finely crystalline powder. It is practically insoluble in water, very slightly soluble in 0.1 N HCl and freely soluble in chloroform, ethanol, methanol, and acetonitrile. Iloperidone tablets are intended for oral administration only. Each round, uncoated tablet contains 1 mg, 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of iloperidone. Inactive ingredients are: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate and purified water (removed during processing). The tablets are white to off-white, round, flat with beveled edges uncoated tablet, debossed with "050","051","052","053","054","055",or "056"on one side and plain on other side.</Description>
</NDC>
</NDCList>