{
"NDC": [
{
"NDCCode": "49643-705-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-705-50) ",
"NDC11Code": "49643-0705-50",
"ProductNDC": "49643-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Cat Hair",
"NonProprietaryName": "Cat Hair",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920815",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103473",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "FELIS CATUS HAIR",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Dander [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Salivary Proteins and Peptides [CS], Standardized Animal Hair Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920815",
"SamplePackage": "N",
"IndicationAndUsage": "Studies have shown that skin tests with cat extract are useful in the diagnosis of cat allergy. As a rule, persons with cat allergy have positive skin reactions when tested with cat extract, and non-allergic individuals rarely react (7, 8, 9). However, the relationship between a positive skin test and the appearance of clinical symptoms after exposure to a cat is not absolute, i.e., some skin-test positive persons do not experience allergic symptoms after exposure (10). Failure to experience symptoms may be dose related, since it is known that cats vary significantly in the amount of Fel d1 they produce (11). The efficacy of cat extract immunotherapy in the treatment of bronchial asthma has been shown in two studies (12, 13) A reduction in bronchial sensitivity was observed in five patients with cat allergy, whereas no reduction was observed in placebo treated, cat-allergic patients.",
"Description": "Standardized Cat Hair Extract is a clear, light yellow to amber solution of the allergens of cat hair, extracted in buffered saline containing sodium chloride, sodium bicarbonate and 50% glycerol by volume. Phenol at 0.4% w/v is added as a preservative. Source material for the extract is obtained from the hair of the domestic cat The importance of surface allergens in cat allergy has been shown in several investigations (1,2,3). Standardization The potency of Standardized Cat Hair Extract is based on the amount of Fel d 1 allergen in the extract. Extract containing 5-9.9 units per mL is assigned a potency of 5,000 Bioequivalent Allergy Units (BAU/mL). Extract containing 10-19.9 Fel d 1 units is assigned a potency of 10,000 BAU/mL. BAU/mL values are based on quantitative skin testing. The primary allergen of Standardized Cat Hair Extract is Fel d 1. Standardized Cat Pelt Extract contains Fel d 1, as well as non-Fel d 1 allergens. The latter are believed lobe components of cat serum, such as albumin. Pelt extracts have a higher protein content than hair extracts, and the isoelectric focusing (IEF) pattern of the pelt extract reveals protein bands that are not present in cat hair extracts. The IEF pattern of cat hair extracts shows primarily Fel d 1 allergen without serum components. The importance of Fel d1 as a means of standardizing the potency of cat extract is based on the following observations: 1. The intensity of skin reactions to cat extract correlates with the Fel d 1 content of the extract in most cat sensitive patients(1). 2. The absorption of cat extract with monospecific antisera to Fel d 1 causes a reduction in the allergenic activity of cat extract (1). 3. The precipitin arc of Fel d 1 in cat extract binds most of the IgE antibody in sera obtained from cat allergic individuals (2)."
},
{
"NDCCode": "49643-705-05",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49643-705-05) ",
"NDC11Code": "49643-0705-05",
"ProductNDC": "49643-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Cat Hair",
"NonProprietaryName": "Cat Hair",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920815",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103473",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "FELIS CATUS HAIR",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Dander [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Salivary Proteins and Peptides [CS], Standardized Animal Hair Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920815",
"SamplePackage": "N",
"IndicationAndUsage": "Studies have shown that skin tests with cat extract are useful in the diagnosis of cat allergy. As a rule, persons with cat allergy have positive skin reactions when tested with cat extract, and non-allergic individuals rarely react (7, 8, 9). However, the relationship between a positive skin test and the appearance of clinical symptoms after exposure to a cat is not absolute, i.e., some skin-test positive persons do not experience allergic symptoms after exposure (10). Failure to experience symptoms may be dose related, since it is known that cats vary significantly in the amount of Fel d1 they produce (11). The efficacy of cat extract immunotherapy in the treatment of bronchial asthma has been shown in two studies (12, 13) A reduction in bronchial sensitivity was observed in five patients with cat allergy, whereas no reduction was observed in placebo treated, cat-allergic patients.",
"Description": "Standardized Cat Hair Extract is a clear, light yellow to amber solution of the allergens of cat hair, extracted in buffered saline containing sodium chloride, sodium bicarbonate and 50% glycerol by volume. Phenol at 0.4% w/v is added as a preservative. Source material for the extract is obtained from the hair of the domestic cat The importance of surface allergens in cat allergy has been shown in several investigations (1,2,3). Standardization The potency of Standardized Cat Hair Extract is based on the amount of Fel d 1 allergen in the extract. Extract containing 5-9.9 units per mL is assigned a potency of 5,000 Bioequivalent Allergy Units (BAU/mL). Extract containing 10-19.9 Fel d 1 units is assigned a potency of 10,000 BAU/mL. BAU/mL values are based on quantitative skin testing. The primary allergen of Standardized Cat Hair Extract is Fel d 1. Standardized Cat Pelt Extract contains Fel d 1, as well as non-Fel d 1 allergens. The latter are believed lobe components of cat serum, such as albumin. Pelt extracts have a higher protein content than hair extracts, and the isoelectric focusing (IEF) pattern of the pelt extract reveals protein bands that are not present in cat hair extracts. The IEF pattern of cat hair extracts shows primarily Fel d 1 allergen without serum components. The importance of Fel d1 as a means of standardizing the potency of cat extract is based on the following observations: 1. The intensity of skin reactions to cat extract correlates with the Fel d 1 content of the extract in most cat sensitive patients(1). 2. The absorption of cat extract with monospecific antisera to Fel d 1 causes a reduction in the allergenic activity of cat extract (1). 3. The precipitin arc of Fel d 1 in cat extract binds most of the IgE antibody in sera obtained from cat allergic individuals (2)."
},
{
"NDCCode": "49643-705-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49643-705-10) ",
"NDC11Code": "49643-0705-10",
"ProductNDC": "49643-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Cat Hair",
"NonProprietaryName": "Cat Hair",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920815",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103473",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "FELIS CATUS HAIR",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Dander [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Salivary Proteins and Peptides [CS], Standardized Animal Hair Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920815",
"SamplePackage": "N",
"IndicationAndUsage": "Studies have shown that skin tests with cat extract are useful in the diagnosis of cat allergy. As a rule, persons with cat allergy have positive skin reactions when tested with cat extract, and non-allergic individuals rarely react (7, 8, 9). However, the relationship between a positive skin test and the appearance of clinical symptoms after exposure to a cat is not absolute, i.e., some skin-test positive persons do not experience allergic symptoms after exposure (10). Failure to experience symptoms may be dose related, since it is known that cats vary significantly in the amount of Fel d1 they produce (11). The efficacy of cat extract immunotherapy in the treatment of bronchial asthma has been shown in two studies (12, 13) A reduction in bronchial sensitivity was observed in five patients with cat allergy, whereas no reduction was observed in placebo treated, cat-allergic patients.",
"Description": "Standardized Cat Hair Extract is a clear, light yellow to amber solution of the allergens of cat hair, extracted in buffered saline containing sodium chloride, sodium bicarbonate and 50% glycerol by volume. Phenol at 0.4% w/v is added as a preservative. Source material for the extract is obtained from the hair of the domestic cat The importance of surface allergens in cat allergy has been shown in several investigations (1,2,3). Standardization The potency of Standardized Cat Hair Extract is based on the amount of Fel d 1 allergen in the extract. Extract containing 5-9.9 units per mL is assigned a potency of 5,000 Bioequivalent Allergy Units (BAU/mL). Extract containing 10-19.9 Fel d 1 units is assigned a potency of 10,000 BAU/mL. BAU/mL values are based on quantitative skin testing. The primary allergen of Standardized Cat Hair Extract is Fel d 1. Standardized Cat Pelt Extract contains Fel d 1, as well as non-Fel d 1 allergens. The latter are believed lobe components of cat serum, such as albumin. Pelt extracts have a higher protein content than hair extracts, and the isoelectric focusing (IEF) pattern of the pelt extract reveals protein bands that are not present in cat hair extracts. The IEF pattern of cat hair extracts shows primarily Fel d 1 allergen without serum components. The importance of Fel d1 as a means of standardizing the potency of cat extract is based on the following observations: 1. The intensity of skin reactions to cat extract correlates with the Fel d 1 content of the extract in most cat sensitive patients(1). 2. The absorption of cat extract with monospecific antisera to Fel d 1 causes a reduction in the allergenic activity of cat extract (1). 3. The precipitin arc of Fel d 1 in cat extract binds most of the IgE antibody in sera obtained from cat allergic individuals (2)."
},
{
"NDCCode": "49643-705-30",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (49643-705-30) ",
"NDC11Code": "49643-0705-30",
"ProductNDC": "49643-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Cat Hair",
"NonProprietaryName": "Cat Hair",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19920815",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103473",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "FELIS CATUS HAIR",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Dander [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Salivary Proteins and Peptides [CS], Standardized Animal Hair Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920815",
"SamplePackage": "N",
"IndicationAndUsage": "Studies have shown that skin tests with cat extract are useful in the diagnosis of cat allergy. As a rule, persons with cat allergy have positive skin reactions when tested with cat extract, and non-allergic individuals rarely react (7, 8, 9). However, the relationship between a positive skin test and the appearance of clinical symptoms after exposure to a cat is not absolute, i.e., some skin-test positive persons do not experience allergic symptoms after exposure (10). Failure to experience symptoms may be dose related, since it is known that cats vary significantly in the amount of Fel d1 they produce (11). The efficacy of cat extract immunotherapy in the treatment of bronchial asthma has been shown in two studies (12, 13) A reduction in bronchial sensitivity was observed in five patients with cat allergy, whereas no reduction was observed in placebo treated, cat-allergic patients.",
"Description": "Standardized Cat Hair Extract is a clear, light yellow to amber solution of the allergens of cat hair, extracted in buffered saline containing sodium chloride, sodium bicarbonate and 50% glycerol by volume. Phenol at 0.4% w/v is added as a preservative. Source material for the extract is obtained from the hair of the domestic cat The importance of surface allergens in cat allergy has been shown in several investigations (1,2,3). Standardization The potency of Standardized Cat Hair Extract is based on the amount of Fel d 1 allergen in the extract. Extract containing 5-9.9 units per mL is assigned a potency of 5,000 Bioequivalent Allergy Units (BAU/mL). Extract containing 10-19.9 Fel d 1 units is assigned a potency of 10,000 BAU/mL. BAU/mL values are based on quantitative skin testing. The primary allergen of Standardized Cat Hair Extract is Fel d 1. Standardized Cat Pelt Extract contains Fel d 1, as well as non-Fel d 1 allergens. The latter are believed lobe components of cat serum, such as albumin. Pelt extracts have a higher protein content than hair extracts, and the isoelectric focusing (IEF) pattern of the pelt extract reveals protein bands that are not present in cat hair extracts. The IEF pattern of cat hair extracts shows primarily Fel d 1 allergen without serum components. The importance of Fel d1 as a means of standardizing the potency of cat extract is based on the following observations: 1. The intensity of skin reactions to cat extract correlates with the Fel d 1 content of the extract in most cat sensitive patients(1). 2. The absorption of cat extract with monospecific antisera to Fel d 1 causes a reduction in the allergenic activity of cat extract (1). 3. The precipitin arc of Fel d 1 in cat extract binds most of the IgE antibody in sera obtained from cat allergic individuals (2)."
},
{
"NDCCode": "13811-705-50",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (13811-705-50) > 50 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "13811-0705-50",
"ProductNDC": "13811-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Phenylacetate And Sodium Benzoate",
"NonProprietaryName": "Sodium Phenylacetate And Sodium Benzoate",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160224",
"EndMarketingDate": "20220630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207096",
"LabelerName": "Trigen Laboratories, LLC",
"SubstanceName": "SODIUM BENZOATE; SODIUM PHENYLACETATE",
"StrengthNumber": "100; 100",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Ammonium Ion Binding Activity [MoA], Ammonium Ion Binding Activity [MoA], Nitrogen Binding Agent [EPC], Nitrogen Binding Agent [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160226",
"EndMarketingDatePackage": "20220630",
"SamplePackage": "N"
},
{
"NDCCode": "21749-705-50",
"PackageDescription": "15 mL in 1 PACKAGE (21749-705-50) ",
"NDC11Code": "21749-0705-50",
"ProductNDC": "21749-705",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Purell Advanced Refreshing Aloe",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120314",
"EndMarketingDate": "20220101",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "GOJO Industries, Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": ".7",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120314",
"EndMarketingDatePackage": "20220101",
"SamplePackage": "N"
},
{
"NDCCode": "25021-705-82",
"PackageDescription": "10 BAG in 1 CARTON (25021-705-82) / 50 mL in 1 BAG",
"NDC11Code": "25021-0705-82",
"ProductNDC": "25021-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219215",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250715",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen Injection is indicated for : 1 the management of mild to moderate pain in adult and pediatric patients 2 years and older , 2 the management of moderate to severe pain with adjunctive opioid analgesics in adult and pediatric patients 2 years and older , 3 the reduction of fever in adult and pediatric patients. .",
"Description": "Acetaminophen is a non-salicylate antipyretic and non-opioid analgesic agent. Its chemical name is N-acetyl-p-aminophenol. Acetaminophen has a molecular weight of 151.16. Its structural formula is:. Acetaminophen Injection is a sterile, clear, colorless, non pyrogenic, isotonic formulation of acetaminophen intended for intravenous infusion. It has a pH of approximately 4.5 to 5.5 and an osmolality of approximately between 270 mOsm/kg and 310 mOsm/kg. Each 100 mL contains 1,000 mg Acetaminophen, USP, 3,800 mg Mannitol, USP, 30 mg Sodium Citrate Dihydrate USP, Water for Injection, USP qs. Each 50 mL contains 500 mg Acetaminophen, USP, 1,900 mg Mannitol, USP, 15 mg Sodium Citrate Dihydrate USP, Water for Injection, USP qs. pH is adjusted with glacial acetic acid."
},
{
"NDCCode": "42858-705-50",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (42858-705-50) ",
"NDC11Code": "42858-0705-50",
"ProductNDC": "42858-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paroxetine",
"NonProprietaryName": "Paroxetine Hydrochloride Hemihydrate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180914",
"EndMarketingDate": "20260731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209293",
"LabelerName": "Rhodes Pharmaceuticals LLC",
"SubstanceName": "PAROXETINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180914",
"EndMarketingDatePackage": "20260731",
"SamplePackage": "N",
"IndicationAndUsage": "Paroxetine Extended-Release Tablets, USP are indicated in adults for the treatment of: 1 Major depressive disorder (MDD), 2 Panic disorder (PD), 3 Social anxiety disorder (SAD), 4 Premenstrual dysphoric disorder (PMDD).",
"Description": "Paroxetine Extended-Release Tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3∙HCl∙1/2H2O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride is. Paroxetine hydrochloride is an odorless, off-white powder, having a melting point range of 120°C to 138°C and a solubility of 5.4 mg/mL in water. Each enteric coated, extended-release tablet contains paroxetine base of 12.5 mg (white tablet), 25 mg (brown tablet), 37.5 mg (orange tablet), which is equivalent to 14.25 mg, 28.51 mg, or 42.76 mg of paroxetine hydrochloride, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of carboxymethylcellulose sodium, copovidone, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid – ethyl acrylate copolymer (1:1), polysorbate 80, silicon dioxide, sodium lauryl sulfate, talcum, titanium dioxide, and triethyl citrate. In addition, the 25 mg tablets also contain the following coloring agents: iron oxide black and iron oxide red and the 37.5 mg tablets contain iron oxide red and iron oxide yellow. USP dissolution test is pending."
},
{
"NDCCode": "49348-705-09",
"PackageDescription": "1 BOTTLE in 1 CARTON (49348-705-09) > 50 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE",
"NDC11Code": "49348-0705-09",
"ProductNDC": "49348-705",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunmark 8 Hour Pain Relief",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20050830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075077",
"LabelerName": "McKesson",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "650",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-12-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "50268-705-15",
"PackageDescription": "50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-705-15) > 1 TABLET in 1 BLISTER PACK (50268-705-11)",
"NDC11Code": "50268-0705-15",
"ProductNDC": "50268-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Salsalate",
"NonProprietaryName": "Salsalate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20141118",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "AvPAK",
"SubstanceName": "SALSALATE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-05-09"
},
{
"NDCCode": "58602-705-14",
"PackageDescription": "1 BOTTLE in 1 CARTON (58602-705-14) / 50 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "58602-0705-14",
"ProductNDC": "58602-705",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160426",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206531",
"LabelerName": "Aurohealth LLC",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191221",
"SamplePackage": "N"
},
{
"NDCCode": "59427-705-01",
"PackageDescription": "1 TUBE in 1 CARTON (59427-705-01) > 50 mL in 1 TUBE (59427-705-02)",
"NDC11Code": "59427-0705-01",
"ProductNDC": "59427-705",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vitazing",
"ProprietaryNameSuffix": "Energy Boosting Moisturizer Spf 15",
"NonProprietaryName": "Avobenzone, Octisalate, Octocrylene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20101001",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "ORIGINS NATURAL RESOURCES INC",
"SubstanceName": "AVOBENZONE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "3; 3; 2.7",
"StrengthUnit": "mL/100mL; mL/100mL; mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "60267-705-50",
"PackageDescription": "50 mL in 1 VIAL, SINGLE-DOSE (60267-705-50) ",
"NDC11Code": "60267-0705-50",
"ProductNDC": "60267-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Thiosulfate",
"NonProprietaryName": "Sodium Thiosulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120214",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203923",
"LabelerName": "Hope Pharmaceuticals",
"SubstanceName": "SODIUM THIOSULFATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120214",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Thiosulfate Injection is indicated for sequential use with sodium nitrite for the treatment of acute cyanide poisoning that is judged to be serious or life-threatening. When the diagnosis of cyanide poisoning is uncertain, the potential risks associated with Sodium Thiosulfate Injection should be carefully weighed against the potential benefits, especially if the patient is not in extremis.",
"Description": "Sodium thiosulfate has the chemical name thiosulfuric acid, disodium salt, pentahydrate. The chemical formula is Na2S2O3∙ 5H2O and the molecular weight is 248.17. The structural formula is. Structure of Sodium Thiosulfate Pentahydrate. Sodium Thiosulfate Injection is a cyanide antidote which contains one 50 mL glass vial containing a 25% solution of sodium thiosulfate injection. Sodium thiosulfate injection is a sterile aqueous solution and is intended for intravenous injection. Each vial contains 12.5 grams of sodium thiosulfate in 50 mL solution (250 mg/mL). Each mL also contains 2.8 mg boric acid and 4.4 mg of potassium chloride. The pH of the solution is adjusted with boric acid and/or sodium hydroxide. Sodium thiosulfate injection is a clear solution with a pH between 7.5 and 9.0."
},
{
"NDCCode": "60267-812-00",
"PackageDescription": "1 KIT in 1 CARTON (60267-812-00) * 10 mL in 1 VIAL, SINGLE-USE (60267-311-10) * 50 mL in 1 VIAL, SINGLE-DOSE (60267-705-50) ",
"NDC11Code": "60267-0812-00",
"ProductNDC": "60267-812",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nithiodote",
"NonProprietaryName": "Sodium Nitrite And Sodium Thiosulfate",
"DosageFormName": "KIT",
"StartMarketingDate": "20110114",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA201444",
"LabelerName": "Hope Pharmaceuticals",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110114",
"SamplePackage": "N",
"IndicationAndUsage": "NITHIODOTE is indicated for the treatment of acute cyanide poisoning that is judged to be serious or life-threatening. When the diagnosis of cyanide poisoning is uncertain, carefully weigh the potentially life-threatening risks associated with NITHIODOTE against the potential benefits, especially if the patient is not in extremis.",
"Description": "Sodium nitrite, one of the active ingredients in NITHIODOTE has the chemical name nitrous acid sodium salt. The chemical formula is NaNO2 and the molecular weight is 69.0. Sodium thiosulfate, the second active ingredient in NITHIODOTE has the chemical name thiosulfuric acid, disodium salt, pentahydrate. The chemical formula is Na2S2O3∙ 5H2O and the molecular weight is 248.17. The structural formulae are. Structure of Sodium Nitrite. Structure of Sodium Thiosulfate Pentahydrate. NITHIODOTE is a cyanide antidote which contains one 10 mL glass vial of a 3% solution of sodium nitrite injection and one 50 mL glass vial containing a 25% solution of sodium thiosulfate injection. Sodium nitrite injection is a sterile aqueous solution and is intended for intravenous injection. Each vial contains 300 mg of sodium nitrite in 10 mL solution (30 mg/mL). Sodium nitrite injection is a clear solution with a pH between 7.0 and 9.0. Sodium thiosulfate injection is a sterile aqueous solution and is intended for intravenous injection. Each vial contains 12.5 grams of sodium thiosulfate in 50 mL solution (250 mg/mL). Each mL also contains 2.8 mg boric acid and 4.4 mg of potassium chloride. The pH of the solution is adjusted with boric acid and/or sodium hydroxide. Sodium thiosulfate injection is a clear solution with a pH between 7.5 and 9.0."
},
{
"NDCCode": "60687-705-65",
"PackageDescription": "50 BLISTER PACK in 1 CARTON (60687-705-65) / 1 TABLET in 1 BLISTER PACK (60687-705-11) ",
"NDC11Code": "60687-0705-65",
"ProductNDC": "60687-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Demeclocycline Hydrochloride",
"NonProprietaryName": "Demeclocycline",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065425",
"LabelerName": "American Health Packaging",
"SubstanceName": "DEMECLOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2024-09-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230119",
"SamplePackage": "N",
"IndicationAndUsage": "Demeclocycline hydrochloride tablets are indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the conditions below. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox and tick fevers caused by rickettsiae;. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum due to Chlamydia trachomatis. Psittacosis (Ornithosis) due to Chlamydia psittaci. Trachoma due to Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Nongonococcal urethritis in adults caused by Ureaplasma urealyticum or Chlamydia trachomatis. Relapsing fever due to Borrelia recurrentis. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections cause by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin);. Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Calymmatobacterium granulomatis. Demeclocycline hydrochloride tablets are indicated for treatment of infections by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Demeclocycline hydrochloride tablets are indicated for treatment of infections caused by the following gram-positive microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Skin and skin structure infections caused by Staphylococcus aureus. (Note: Tetracyclines, including demeclocycline, are not the drugs of choice in the treatment of any type of staphylococcal infection). When penicillin is contraindicated, tetracyclines, including demeclocycline hydrochloride, are alternative drugs in the treatment of the following infections. Uncomplicated urethritis in men due to Neisseria gonorrhoeae, and for the treatment of other uncomplicated gonococcal infections. Infections in women caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum subspecies pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Anthrax due to Bacillus anthracis. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Clostridial diseases caused by Clostridium species. In acute intestinal amebiasis, demeclocycline hydrochloride may be a useful adjunct to amebicides. In severe acne, demeclocycline hydrochloride may be a useful adjunctive therapy. To reduce the development of drug-resistant bacteria and maintain the effectiveness of demeclocycline hydrochloride tablets and other antibacterial drugs, demeclocycline hydrochloride tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Demeclocycline hydrochloride is an antibiotic isolated from a mutant strain of Streptomyces aureofaciens. Chemically it is 7-Chloro-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,12a-pentahydroxy-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. Its structural formula is. Demeclocycline hydrochloride tablets, USP, for oral administration, contain 150 mg or 300 mg of demeclocycline hydrochloride, USP and the following inactive ingredients: alginic acid, corn starch, ethylcellulose, FD&C Red 40 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium lauryl sulfate, talc and titanium dioxide. In addition, the 150 mg tablet contains D&C Red 27 aluminum lake."
},
{
"NDCCode": "64980-705-50",
"PackageDescription": "500 TABLET in 1 BOTTLE (64980-705-50) ",
"NDC11Code": "64980-0705-50",
"ProductNDC": "64980-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fexmid",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250310",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218936",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250310",
"SamplePackage": "N",
"IndicationAndUsage": "Fexmid® is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Fexmid® should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Fexmid® has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Fexmid® (cyclobenzaprine hydrochloride) a skeletal muscle relaxant, is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H -dibenzo[a,d] cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Fexmid® is supplied as a 7.5 mg tablet for oral administration. Each 7.5 mg tablet contains cyclobenzaprine hydrochloride and the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose anhydrous, magnesium stearate, microcrystalline cellulose, OPADRY White, pregelatinized starch, purified water. Opadry components: Hypromellose, polyethylene glycol/macrogol, talc, titanium dioxide. FDA approved dissolution specifications differ from that of the USP."
},
{
"NDCCode": "68001-705-27",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (68001-705-27) / 50 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "68001-0705-27",
"ProductNDC": "68001-705",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paclitaxel",
"NonProprietaryName": "Paclitaxel",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216874",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "PACLITAXEL",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260409",
"SamplePackage": "N",
"IndicationAndUsage": "Paclitaxel Injection, USP is indicated as subsequent therapy for the treatment of advanced carcinoma of the ovary. As first-line therapy, Paclitaxel Injection, USP is indicated in combination with cisplatin. Paclitaxel Injection, USP is indicated for the adjuvant treatment of node-positive breast cancer administered sequentially to standard doxorubicin-containing combination chemotherapy. In the clinical trial, there was an overall favorable effect on disease-free and overall survival in the total population of patients with receptor-positive and receptor-negative tumors, but the benefit has been specifically demonstrated by available data (median follow-up 30 months) only in the patients with estrogen and progesterone receptor-negative tumors (see CLINICAL STUDIES, Breast Carcinoma). Paclitaxel Injection, USP is indicated for the treatment of breast cancer after failure of combination chemotherapy for metastatic disease or relapse within 6 months of adjuvant chemotherapy. Prior therapy should have included an anthracycline unless clinically contraindicated. Paclitaxel Injection, USP, in combination with cisplatin, is indicated for the first-line treatment of non-small cell lung cancer in patients who are not candidates for potentially curative surgery and/or radiation therapy. Paclitaxel Injection, USP is indicated for the second-line treatment of AIDS-related Kaposi's sarcoma.",
"Description": "Paclitaxel Injection, USP is a clear, colorless to slightly yellow viscous solution. It is supplied as a nonaqueous solution intended for dilution with a suitable parenteral fluid prior to intravenous infusion. Paclitaxel Injection, USP is available in 30 mg (5 mL), 100 mg (16.7 mL), and 300 mg (50 mL) multidose vials. Each mL of sterile nonpyrogenic solution contains 6 mg paclitaxel, USP, 527 mg of polyoxyl 35 castor oil, NF and 49.7% (v/v) dehydrated alcohol, USP and 2 mg citric acid, USP. Paclitaxel is a natural product with antitumor activity. Paclitaxel is obtained via a semi-synthetic process from Taxus baccata. The chemical name for paclitaxel is 5β,20-Epoxy-1,2α,4,7β, 10β,13α-hexahydroxytax-11-en-9-one 4,10-diacetate 2-benzoate 13-ester with (2R,3S)-N-benzoyl-3-phenylisoserine. Paclitaxel has the following structural formula. Paclitaxel, USP is a white to off-white crystalline powder with the empirical formula C 47H 51NO 14and a molecular weight of 853.9. It is highly lipophilic, insoluble in water, and melts at around 216° to 217°C."
},
{
"NDCCode": "71919-705-09",
"PackageDescription": "50 mL in 1 BOTTLE, GLASS (71919-705-09) ",
"NDC11Code": "71919-0705-09",
"ProductNDC": "71919-705",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Veratrum Album",
"NonProprietaryName": "Veratrum Album",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20110517",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "VERATRUM ALBUM ROOT",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20110517",
"SamplePackage": "N"
},
{
"NDCCode": "83254-705-50",
"PackageDescription": "50 mL in 1 BOTTLE (83254-705-50) ",
"NDC11Code": "83254-0705-50",
"ProductNDC": "83254-705",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Povidone Iodine",
"NonProprietaryName": "Povidone Iodine 7.5 Solution",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230504",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "M005",
"LabelerName": "1201258 Ontario Inc. O/A Nanz Pharma",
"SubstanceName": "POVIDONE-IODINE",
"StrengthNumber": "7.5",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2024-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230504",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of athlete's foot, jock itch, and ringworm. For the effective relief of burning, cracking, discomfort, redness, scaling, soreness, and chafing that is associated with jock itch."
},
{
"NDCCode": "84756-705-04",
"PackageDescription": "50 mL in 1 BOTTLE (84756-705-04) ",
"NDC11Code": "84756-0705-04",
"ProductNDC": "84756-705",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Morocco Argan Oil Hair Treatment",
"NonProprietaryName": "Morocco Argan Oil Hair Treatment",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241210",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Yiwu Ziqiu Import Export Co Ltd",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20241210",
"SamplePackage": "N",
"IndicationAndUsage": "Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed."
},
{
"NDCCode": "49643-003-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-003-50) ",
"NDC11Code": "49643-0003-50",
"ProductNDC": "49643-003",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Cattle Epithelia",
"NonProprietaryName": "Cattle Epithelia",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "BOS TAURUS SKIN",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-004-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-004-50) ",
"NDC11Code": "49643-0004-50",
"ProductNDC": "49643-004",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Cotton Linters",
"NonProprietaryName": "Cotton Linters",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "COTTON FIBER",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Plant Fiber Allergenic Extract [EPC], Plant Proteins [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-005-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-005-50) ",
"NDC11Code": "49643-0005-50",
"ProductNDC": "49643-005",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Cottonseed",
"NonProprietaryName": "Cottonseed",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "COTTON SEED",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-006-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-006-50) ",
"NDC11Code": "49643-0006-50",
"ProductNDC": "49643-006",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Dog Hair",
"NonProprietaryName": "Dog Hair",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "CANIS LUPUS FAMILIARIS HAIR",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Animal Fur [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Hair Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-008-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-008-50) ",
"NDC11Code": "49643-0008-50",
"ProductNDC": "49643-008",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "House Dust",
"NonProprietaryName": "House Dust",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "HOUSE DUST",
"StrengthNumber": ".02",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], House Dust [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized House Dust Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-010-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-010-50) ",
"NDC11Code": "49643-0010-50",
"ProductNDC": "49643-010",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Flaxseed",
"NonProprietaryName": "Flaxseed",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "FLAX SEED",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-011-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-011-50) ",
"NDC11Code": "49643-0011-50",
"ProductNDC": "49643-011",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Goat Epithelia",
"NonProprietaryName": "Goat Epithelia",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "CAPRA HIRCUS SKIN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-012-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-012-50) ",
"NDC11Code": "49643-0012-50",
"ProductNDC": "49643-012",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Guinea Pig Epithelia",
"NonProprietaryName": "Guinea Pig Epithelia",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "CAVIA PORCELLUS SKIN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-013-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-013-50) ",
"NDC11Code": "49643-0013-50",
"ProductNDC": "49643-013",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Hamster Epithelia",
"NonProprietaryName": "Hamster Epithelia",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "MESOCRICETUS AURATUS SKIN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
},
{
"NDCCode": "49643-014-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (49643-014-50) ",
"NDC11Code": "49643-0014-50",
"ProductNDC": "49643-014",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Hog Epithelia",
"NonProprietaryName": "Hog Epithelia",
"DosageFormName": "INJECTION",
"RouteName": "CUTANEOUS; INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740312",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102211",
"LabelerName": "Allermed Laboratories, Inc.",
"SubstanceName": "SUS SCROFA SKIN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19740312",
"SamplePackage": "N",
"IndicationAndUsage": "Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.",
"Description": "Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49643-705-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-705-50) </PackageDescription>
<NDC11Code>49643-0705-50</NDC11Code>
<ProductNDC>49643-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Cat Hair</ProprietaryName>
<NonProprietaryName>Cat Hair</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920815</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103473</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>FELIS CATUS HAIR</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dander [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Salivary Proteins and Peptides [CS], Standardized Animal Hair Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Studies have shown that skin tests with cat extract are useful in the diagnosis of cat allergy. As a rule, persons with cat allergy have positive skin reactions when tested with cat extract, and non-allergic individuals rarely react (7, 8, 9). However, the relationship between a positive skin test and the appearance of clinical symptoms after exposure to a cat is not absolute, i.e., some skin-test positive persons do not experience allergic symptoms after exposure (10). Failure to experience symptoms may be dose related, since it is known that cats vary significantly in the amount of Fel d1 they produce (11). The efficacy of cat extract immunotherapy in the treatment of bronchial asthma has been shown in two studies (12, 13) A reduction in bronchial sensitivity was observed in five patients with cat allergy, whereas no reduction was observed in placebo treated, cat-allergic patients.</IndicationAndUsage>
<Description>Standardized Cat Hair Extract is a clear, light yellow to amber solution of the allergens of cat hair, extracted in buffered saline containing sodium chloride, sodium bicarbonate and 50% glycerol by volume. Phenol at 0.4% w/v is added as a preservative. Source material for the extract is obtained from the hair of the domestic cat The importance of surface allergens in cat allergy has been shown in several investigations (1,2,3). Standardization The potency of Standardized Cat Hair Extract is based on the amount of Fel d 1 allergen in the extract. Extract containing 5-9.9 units per mL is assigned a potency of 5,000 Bioequivalent Allergy Units (BAU/mL). Extract containing 10-19.9 Fel d 1 units is assigned a potency of 10,000 BAU/mL. BAU/mL values are based on quantitative skin testing. The primary allergen of Standardized Cat Hair Extract is Fel d 1. Standardized Cat Pelt Extract contains Fel d 1, as well as non-Fel d 1 allergens. The latter are believed lobe components of cat serum, such as albumin. Pelt extracts have a higher protein content than hair extracts, and the isoelectric focusing (IEF) pattern of the pelt extract reveals protein bands that are not present in cat hair extracts. The IEF pattern of cat hair extracts shows primarily Fel d 1 allergen without serum components. The importance of Fel d1 as a means of standardizing the potency of cat extract is based on the following observations: 1. The intensity of skin reactions to cat extract correlates with the Fel d 1 content of the extract in most cat sensitive patients(1). 2. The absorption of cat extract with monospecific antisera to Fel d 1 causes a reduction in the allergenic activity of cat extract (1). 3. The precipitin arc of Fel d 1 in cat extract binds most of the IgE antibody in sera obtained from cat allergic individuals (2).</Description>
</NDC>
<NDC>
<NDCCode>49643-705-05</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49643-705-05) </PackageDescription>
<NDC11Code>49643-0705-05</NDC11Code>
<ProductNDC>49643-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Cat Hair</ProprietaryName>
<NonProprietaryName>Cat Hair</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920815</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103473</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>FELIS CATUS HAIR</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dander [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Salivary Proteins and Peptides [CS], Standardized Animal Hair Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Studies have shown that skin tests with cat extract are useful in the diagnosis of cat allergy. As a rule, persons with cat allergy have positive skin reactions when tested with cat extract, and non-allergic individuals rarely react (7, 8, 9). However, the relationship between a positive skin test and the appearance of clinical symptoms after exposure to a cat is not absolute, i.e., some skin-test positive persons do not experience allergic symptoms after exposure (10). Failure to experience symptoms may be dose related, since it is known that cats vary significantly in the amount of Fel d1 they produce (11). The efficacy of cat extract immunotherapy in the treatment of bronchial asthma has been shown in two studies (12, 13) A reduction in bronchial sensitivity was observed in five patients with cat allergy, whereas no reduction was observed in placebo treated, cat-allergic patients.</IndicationAndUsage>
<Description>Standardized Cat Hair Extract is a clear, light yellow to amber solution of the allergens of cat hair, extracted in buffered saline containing sodium chloride, sodium bicarbonate and 50% glycerol by volume. Phenol at 0.4% w/v is added as a preservative. Source material for the extract is obtained from the hair of the domestic cat The importance of surface allergens in cat allergy has been shown in several investigations (1,2,3). Standardization The potency of Standardized Cat Hair Extract is based on the amount of Fel d 1 allergen in the extract. Extract containing 5-9.9 units per mL is assigned a potency of 5,000 Bioequivalent Allergy Units (BAU/mL). Extract containing 10-19.9 Fel d 1 units is assigned a potency of 10,000 BAU/mL. BAU/mL values are based on quantitative skin testing. The primary allergen of Standardized Cat Hair Extract is Fel d 1. Standardized Cat Pelt Extract contains Fel d 1, as well as non-Fel d 1 allergens. The latter are believed lobe components of cat serum, such as albumin. Pelt extracts have a higher protein content than hair extracts, and the isoelectric focusing (IEF) pattern of the pelt extract reveals protein bands that are not present in cat hair extracts. The IEF pattern of cat hair extracts shows primarily Fel d 1 allergen without serum components. The importance of Fel d1 as a means of standardizing the potency of cat extract is based on the following observations: 1. The intensity of skin reactions to cat extract correlates with the Fel d 1 content of the extract in most cat sensitive patients(1). 2. The absorption of cat extract with monospecific antisera to Fel d 1 causes a reduction in the allergenic activity of cat extract (1). 3. The precipitin arc of Fel d 1 in cat extract binds most of the IgE antibody in sera obtained from cat allergic individuals (2).</Description>
</NDC>
<NDC>
<NDCCode>49643-705-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49643-705-10) </PackageDescription>
<NDC11Code>49643-0705-10</NDC11Code>
<ProductNDC>49643-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Cat Hair</ProprietaryName>
<NonProprietaryName>Cat Hair</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920815</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103473</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>FELIS CATUS HAIR</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dander [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Salivary Proteins and Peptides [CS], Standardized Animal Hair Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Studies have shown that skin tests with cat extract are useful in the diagnosis of cat allergy. As a rule, persons with cat allergy have positive skin reactions when tested with cat extract, and non-allergic individuals rarely react (7, 8, 9). However, the relationship between a positive skin test and the appearance of clinical symptoms after exposure to a cat is not absolute, i.e., some skin-test positive persons do not experience allergic symptoms after exposure (10). Failure to experience symptoms may be dose related, since it is known that cats vary significantly in the amount of Fel d1 they produce (11). The efficacy of cat extract immunotherapy in the treatment of bronchial asthma has been shown in two studies (12, 13) A reduction in bronchial sensitivity was observed in five patients with cat allergy, whereas no reduction was observed in placebo treated, cat-allergic patients.</IndicationAndUsage>
<Description>Standardized Cat Hair Extract is a clear, light yellow to amber solution of the allergens of cat hair, extracted in buffered saline containing sodium chloride, sodium bicarbonate and 50% glycerol by volume. Phenol at 0.4% w/v is added as a preservative. Source material for the extract is obtained from the hair of the domestic cat The importance of surface allergens in cat allergy has been shown in several investigations (1,2,3). Standardization The potency of Standardized Cat Hair Extract is based on the amount of Fel d 1 allergen in the extract. Extract containing 5-9.9 units per mL is assigned a potency of 5,000 Bioequivalent Allergy Units (BAU/mL). Extract containing 10-19.9 Fel d 1 units is assigned a potency of 10,000 BAU/mL. BAU/mL values are based on quantitative skin testing. The primary allergen of Standardized Cat Hair Extract is Fel d 1. Standardized Cat Pelt Extract contains Fel d 1, as well as non-Fel d 1 allergens. The latter are believed lobe components of cat serum, such as albumin. Pelt extracts have a higher protein content than hair extracts, and the isoelectric focusing (IEF) pattern of the pelt extract reveals protein bands that are not present in cat hair extracts. The IEF pattern of cat hair extracts shows primarily Fel d 1 allergen without serum components. The importance of Fel d1 as a means of standardizing the potency of cat extract is based on the following observations: 1. The intensity of skin reactions to cat extract correlates with the Fel d 1 content of the extract in most cat sensitive patients(1). 2. The absorption of cat extract with monospecific antisera to Fel d 1 causes a reduction in the allergenic activity of cat extract (1). 3. The precipitin arc of Fel d 1 in cat extract binds most of the IgE antibody in sera obtained from cat allergic individuals (2).</Description>
</NDC>
<NDC>
<NDCCode>49643-705-30</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49643-705-30) </PackageDescription>
<NDC11Code>49643-0705-30</NDC11Code>
<ProductNDC>49643-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Cat Hair</ProprietaryName>
<NonProprietaryName>Cat Hair</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19920815</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103473</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>FELIS CATUS HAIR</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dander [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Salivary Proteins and Peptides [CS], Standardized Animal Hair Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Studies have shown that skin tests with cat extract are useful in the diagnosis of cat allergy. As a rule, persons with cat allergy have positive skin reactions when tested with cat extract, and non-allergic individuals rarely react (7, 8, 9). However, the relationship between a positive skin test and the appearance of clinical symptoms after exposure to a cat is not absolute, i.e., some skin-test positive persons do not experience allergic symptoms after exposure (10). Failure to experience symptoms may be dose related, since it is known that cats vary significantly in the amount of Fel d1 they produce (11). The efficacy of cat extract immunotherapy in the treatment of bronchial asthma has been shown in two studies (12, 13) A reduction in bronchial sensitivity was observed in five patients with cat allergy, whereas no reduction was observed in placebo treated, cat-allergic patients.</IndicationAndUsage>
<Description>Standardized Cat Hair Extract is a clear, light yellow to amber solution of the allergens of cat hair, extracted in buffered saline containing sodium chloride, sodium bicarbonate and 50% glycerol by volume. Phenol at 0.4% w/v is added as a preservative. Source material for the extract is obtained from the hair of the domestic cat The importance of surface allergens in cat allergy has been shown in several investigations (1,2,3). Standardization The potency of Standardized Cat Hair Extract is based on the amount of Fel d 1 allergen in the extract. Extract containing 5-9.9 units per mL is assigned a potency of 5,000 Bioequivalent Allergy Units (BAU/mL). Extract containing 10-19.9 Fel d 1 units is assigned a potency of 10,000 BAU/mL. BAU/mL values are based on quantitative skin testing. The primary allergen of Standardized Cat Hair Extract is Fel d 1. Standardized Cat Pelt Extract contains Fel d 1, as well as non-Fel d 1 allergens. The latter are believed lobe components of cat serum, such as albumin. Pelt extracts have a higher protein content than hair extracts, and the isoelectric focusing (IEF) pattern of the pelt extract reveals protein bands that are not present in cat hair extracts. The IEF pattern of cat hair extracts shows primarily Fel d 1 allergen without serum components. The importance of Fel d1 as a means of standardizing the potency of cat extract is based on the following observations: 1. The intensity of skin reactions to cat extract correlates with the Fel d 1 content of the extract in most cat sensitive patients(1). 2. The absorption of cat extract with monospecific antisera to Fel d 1 causes a reduction in the allergenic activity of cat extract (1). 3. The precipitin arc of Fel d 1 in cat extract binds most of the IgE antibody in sera obtained from cat allergic individuals (2).</Description>
</NDC>
<NDC>
<NDCCode>13811-705-50</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (13811-705-50) > 50 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>13811-0705-50</NDC11Code>
<ProductNDC>13811-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Phenylacetate And Sodium Benzoate</ProprietaryName>
<NonProprietaryName>Sodium Phenylacetate And Sodium Benzoate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160224</StartMarketingDate>
<EndMarketingDate>20220630</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207096</ApplicationNumber>
<LabelerName>Trigen Laboratories, LLC</LabelerName>
<SubstanceName>SODIUM BENZOATE; SODIUM PHENYLACETATE</SubstanceName>
<StrengthNumber>100; 100</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Ammonium Ion Binding Activity [MoA], Ammonium Ion Binding Activity [MoA], Nitrogen Binding Agent [EPC], Nitrogen Binding Agent [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160226</StartMarketingDatePackage>
<EndMarketingDatePackage>20220630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>21749-705-50</NDCCode>
<PackageDescription>15 mL in 1 PACKAGE (21749-705-50) </PackageDescription>
<NDC11Code>21749-0705-50</NDC11Code>
<ProductNDC>21749-705</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Purell Advanced Refreshing Aloe</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120314</StartMarketingDate>
<EndMarketingDate>20220101</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>GOJO Industries, Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>.7</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120314</StartMarketingDatePackage>
<EndMarketingDatePackage>20220101</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>25021-705-82</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (25021-705-82) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>25021-0705-82</NDC11Code>
<ProductNDC>25021-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219215</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen Injection is indicated for : 1 the management of mild to moderate pain in adult and pediatric patients 2 years and older , 2 the management of moderate to severe pain with adjunctive opioid analgesics in adult and pediatric patients 2 years and older , 3 the reduction of fever in adult and pediatric patients. .</IndicationAndUsage>
<Description>Acetaminophen is a non-salicylate antipyretic and non-opioid analgesic agent. Its chemical name is N-acetyl-p-aminophenol. Acetaminophen has a molecular weight of 151.16. Its structural formula is:. Acetaminophen Injection is a sterile, clear, colorless, non pyrogenic, isotonic formulation of acetaminophen intended for intravenous infusion. It has a pH of approximately 4.5 to 5.5 and an osmolality of approximately between 270 mOsm/kg and 310 mOsm/kg. Each 100 mL contains 1,000 mg Acetaminophen, USP, 3,800 mg Mannitol, USP, 30 mg Sodium Citrate Dihydrate USP, Water for Injection, USP qs. Each 50 mL contains 500 mg Acetaminophen, USP, 1,900 mg Mannitol, USP, 15 mg Sodium Citrate Dihydrate USP, Water for Injection, USP qs. pH is adjusted with glacial acetic acid.</Description>
</NDC>
<NDC>
<NDCCode>42858-705-50</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (42858-705-50) </PackageDescription>
<NDC11Code>42858-0705-50</NDC11Code>
<ProductNDC>42858-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paroxetine</ProprietaryName>
<NonProprietaryName>Paroxetine Hydrochloride Hemihydrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180914</StartMarketingDate>
<EndMarketingDate>20260731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209293</ApplicationNumber>
<LabelerName>Rhodes Pharmaceuticals LLC</LabelerName>
<SubstanceName>PAROXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180914</StartMarketingDatePackage>
<EndMarketingDatePackage>20260731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paroxetine Extended-Release Tablets, USP are indicated in adults for the treatment of: 1 Major depressive disorder (MDD), 2 Panic disorder (PD), 3 Social anxiety disorder (SAD), 4 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>Paroxetine Extended-Release Tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the empirical formula of C19H20FNO3∙HCl∙1/2H2O. The molecular weight is 374.8 g/mol (329.4 g/mol as free base). The structural formula of paroxetine hydrochloride is. Paroxetine hydrochloride is an odorless, off-white powder, having a melting point range of 120°C to 138°C and a solubility of 5.4 mg/mL in water. Each enteric coated, extended-release tablet contains paroxetine base of 12.5 mg (white tablet), 25 mg (brown tablet), 37.5 mg (orange tablet), which is equivalent to 14.25 mg, 28.51 mg, or 42.76 mg of paroxetine hydrochloride, respectively. Each tablet consists of a hydrophilic matrix that contains the active material. Inactive ingredients consist of carboxymethylcellulose sodium, copovidone, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid – ethyl acrylate copolymer (1:1), polysorbate 80, silicon dioxide, sodium lauryl sulfate, talcum, titanium dioxide, and triethyl citrate. In addition, the 25 mg tablets also contain the following coloring agents: iron oxide black and iron oxide red and the 37.5 mg tablets contain iron oxide red and iron oxide yellow. USP dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>49348-705-09</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (49348-705-09) > 50 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE</PackageDescription>
<NDC11Code>49348-0705-09</NDC11Code>
<ProductNDC>49348-705</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunmark 8 Hour Pain Relief</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075077</ApplicationNumber>
<LabelerName>McKesson</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>650</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50268-705-15</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-705-15) > 1 TABLET in 1 BLISTER PACK (50268-705-11)</PackageDescription>
<NDC11Code>50268-0705-15</NDC11Code>
<ProductNDC>50268-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Salsalate</ProprietaryName>
<NonProprietaryName>Salsalate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141118</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>SALSALATE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-05-09</LastUpdate>
</NDC>
<NDC>
<NDCCode>58602-705-14</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (58602-705-14) / 50 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>58602-0705-14</NDC11Code>
<ProductNDC>58602-705</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160426</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206531</ApplicationNumber>
<LabelerName>Aurohealth LLC</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>59427-705-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (59427-705-01) > 50 mL in 1 TUBE (59427-705-02)</PackageDescription>
<NDC11Code>59427-0705-01</NDC11Code>
<ProductNDC>59427-705</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vitazing</ProprietaryName>
<ProprietaryNameSuffix>Energy Boosting Moisturizer Spf 15</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Octisalate, Octocrylene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20101001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>ORIGINS NATURAL RESOURCES INC</LabelerName>
<SubstanceName>AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>3; 3; 2.7</StrengthNumber>
<StrengthUnit>mL/100mL; mL/100mL; mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>60267-705-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, SINGLE-DOSE (60267-705-50) </PackageDescription>
<NDC11Code>60267-0705-50</NDC11Code>
<ProductNDC>60267-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Thiosulfate</ProprietaryName>
<NonProprietaryName>Sodium Thiosulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120214</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203923</ApplicationNumber>
<LabelerName>Hope Pharmaceuticals</LabelerName>
<SubstanceName>SODIUM THIOSULFATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Thiosulfate Injection is indicated for sequential use with sodium nitrite for the treatment of acute cyanide poisoning that is judged to be serious or life-threatening. When the diagnosis of cyanide poisoning is uncertain, the potential risks associated with Sodium Thiosulfate Injection should be carefully weighed against the potential benefits, especially if the patient is not in extremis.</IndicationAndUsage>
<Description>Sodium thiosulfate has the chemical name thiosulfuric acid, disodium salt, pentahydrate. The chemical formula is Na2S2O3∙ 5H2O and the molecular weight is 248.17. The structural formula is. Structure of Sodium Thiosulfate Pentahydrate. Sodium Thiosulfate Injection is a cyanide antidote which contains one 50 mL glass vial containing a 25% solution of sodium thiosulfate injection. Sodium thiosulfate injection is a sterile aqueous solution and is intended for intravenous injection. Each vial contains 12.5 grams of sodium thiosulfate in 50 mL solution (250 mg/mL). Each mL also contains 2.8 mg boric acid and 4.4 mg of potassium chloride. The pH of the solution is adjusted with boric acid and/or sodium hydroxide. Sodium thiosulfate injection is a clear solution with a pH between 7.5 and 9.0.</Description>
</NDC>
<NDC>
<NDCCode>60267-812-00</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (60267-812-00) * 10 mL in 1 VIAL, SINGLE-USE (60267-311-10) * 50 mL in 1 VIAL, SINGLE-DOSE (60267-705-50) </PackageDescription>
<NDC11Code>60267-0812-00</NDC11Code>
<ProductNDC>60267-812</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nithiodote</ProprietaryName>
<NonProprietaryName>Sodium Nitrite And Sodium Thiosulfate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20110114</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA201444</ApplicationNumber>
<LabelerName>Hope Pharmaceuticals</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NITHIODOTE is indicated for the treatment of acute cyanide poisoning that is judged to be serious or life-threatening. When the diagnosis of cyanide poisoning is uncertain, carefully weigh the potentially life-threatening risks associated with NITHIODOTE against the potential benefits, especially if the patient is not in extremis.</IndicationAndUsage>
<Description>Sodium nitrite, one of the active ingredients in NITHIODOTE has the chemical name nitrous acid sodium salt. The chemical formula is NaNO2 and the molecular weight is 69.0. Sodium thiosulfate, the second active ingredient in NITHIODOTE has the chemical name thiosulfuric acid, disodium salt, pentahydrate. The chemical formula is Na2S2O3∙ 5H2O and the molecular weight is 248.17. The structural formulae are. Structure of Sodium Nitrite. Structure of Sodium Thiosulfate Pentahydrate. NITHIODOTE is a cyanide antidote which contains one 10 mL glass vial of a 3% solution of sodium nitrite injection and one 50 mL glass vial containing a 25% solution of sodium thiosulfate injection. Sodium nitrite injection is a sterile aqueous solution and is intended for intravenous injection. Each vial contains 300 mg of sodium nitrite in 10 mL solution (30 mg/mL). Sodium nitrite injection is a clear solution with a pH between 7.0 and 9.0. Sodium thiosulfate injection is a sterile aqueous solution and is intended for intravenous injection. Each vial contains 12.5 grams of sodium thiosulfate in 50 mL solution (250 mg/mL). Each mL also contains 2.8 mg boric acid and 4.4 mg of potassium chloride. The pH of the solution is adjusted with boric acid and/or sodium hydroxide. Sodium thiosulfate injection is a clear solution with a pH between 7.5 and 9.0.</Description>
</NDC>
<NDC>
<NDCCode>60687-705-65</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 CARTON (60687-705-65) / 1 TABLET in 1 BLISTER PACK (60687-705-11) </PackageDescription>
<NDC11Code>60687-0705-65</NDC11Code>
<ProductNDC>60687-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Demeclocycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Demeclocycline</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065425</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>DEMECLOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Demeclocycline hydrochloride tablets are indicated in the treatment of infections caused by susceptible strains of the designated microorganisms in the conditions below. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox and tick fevers caused by rickettsiae;. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum due to Chlamydia trachomatis. Psittacosis (Ornithosis) due to Chlamydia psittaci. Trachoma due to Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Nongonococcal urethritis in adults caused by Ureaplasma urealyticum or Chlamydia trachomatis. Relapsing fever due to Borrelia recurrentis. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections cause by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin);. Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Calymmatobacterium granulomatis. Demeclocycline hydrochloride tablets are indicated for treatment of infections by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Demeclocycline hydrochloride tablets are indicated for treatment of infections caused by the following gram-positive microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Skin and skin structure infections caused by Staphylococcus aureus. (Note: Tetracyclines, including demeclocycline, are not the drugs of choice in the treatment of any type of staphylococcal infection). When penicillin is contraindicated, tetracyclines, including demeclocycline hydrochloride, are alternative drugs in the treatment of the following infections. Uncomplicated urethritis in men due to Neisseria gonorrhoeae, and for the treatment of other uncomplicated gonococcal infections. Infections in women caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum subspecies pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Anthrax due to Bacillus anthracis. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Clostridial diseases caused by Clostridium species. In acute intestinal amebiasis, demeclocycline hydrochloride may be a useful adjunct to amebicides. In severe acne, demeclocycline hydrochloride may be a useful adjunctive therapy. To reduce the development of drug-resistant bacteria and maintain the effectiveness of demeclocycline hydrochloride tablets and other antibacterial drugs, demeclocycline hydrochloride tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Demeclocycline hydrochloride is an antibiotic isolated from a mutant strain of Streptomyces aureofaciens. Chemically it is 7-Chloro-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,12a-pentahydroxy-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. Its structural formula is. Demeclocycline hydrochloride tablets, USP, for oral administration, contain 150 mg or 300 mg of demeclocycline hydrochloride, USP and the following inactive ingredients: alginic acid, corn starch, ethylcellulose, FD&C Red 40 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, sodium lauryl sulfate, talc and titanium dioxide. In addition, the 150 mg tablet contains D&C Red 27 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>64980-705-50</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (64980-705-50) </PackageDescription>
<NDC11Code>64980-0705-50</NDC11Code>
<ProductNDC>64980-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fexmid</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250310</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218936</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250310</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fexmid® is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Fexmid® should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Fexmid® has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Fexmid® (cyclobenzaprine hydrochloride) a skeletal muscle relaxant, is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217°C, and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl is designated chemically as 3-(5H -dibenzo[a,d] cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Fexmid® is supplied as a 7.5 mg tablet for oral administration. Each 7.5 mg tablet contains cyclobenzaprine hydrochloride and the following inactive ingredients: colloidal silicon dioxide, crospovidone, lactose anhydrous, magnesium stearate, microcrystalline cellulose, OPADRY White, pregelatinized starch, purified water. Opadry components: Hypromellose, polyethylene glycol/macrogol, talc, titanium dioxide. FDA approved dissolution specifications differ from that of the USP.</Description>
</NDC>
<NDC>
<NDCCode>68001-705-27</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (68001-705-27) / 50 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>68001-0705-27</NDC11Code>
<ProductNDC>68001-705</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paclitaxel</ProprietaryName>
<NonProprietaryName>Paclitaxel</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216874</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>PACLITAXEL</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260409</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paclitaxel Injection, USP is indicated as subsequent therapy for the treatment of advanced carcinoma of the ovary. As first-line therapy, Paclitaxel Injection, USP is indicated in combination with cisplatin. Paclitaxel Injection, USP is indicated for the adjuvant treatment of node-positive breast cancer administered sequentially to standard doxorubicin-containing combination chemotherapy. In the clinical trial, there was an overall favorable effect on disease-free and overall survival in the total population of patients with receptor-positive and receptor-negative tumors, but the benefit has been specifically demonstrated by available data (median follow-up 30 months) only in the patients with estrogen and progesterone receptor-negative tumors (see CLINICAL STUDIES, Breast Carcinoma). Paclitaxel Injection, USP is indicated for the treatment of breast cancer after failure of combination chemotherapy for metastatic disease or relapse within 6 months of adjuvant chemotherapy. Prior therapy should have included an anthracycline unless clinically contraindicated. Paclitaxel Injection, USP, in combination with cisplatin, is indicated for the first-line treatment of non-small cell lung cancer in patients who are not candidates for potentially curative surgery and/or radiation therapy. Paclitaxel Injection, USP is indicated for the second-line treatment of AIDS-related Kaposi's sarcoma.</IndicationAndUsage>
<Description>Paclitaxel Injection, USP is a clear, colorless to slightly yellow viscous solution. It is supplied as a nonaqueous solution intended for dilution with a suitable parenteral fluid prior to intravenous infusion. Paclitaxel Injection, USP is available in 30 mg (5 mL), 100 mg (16.7 mL), and 300 mg (50 mL) multidose vials. Each mL of sterile nonpyrogenic solution contains 6 mg paclitaxel, USP, 527 mg of polyoxyl 35 castor oil, NF and 49.7% (v/v) dehydrated alcohol, USP and 2 mg citric acid, USP. Paclitaxel is a natural product with antitumor activity. Paclitaxel is obtained via a semi-synthetic process from Taxus baccata. The chemical name for paclitaxel is 5β,20-Epoxy-1,2α,4,7β, 10β,13α-hexahydroxytax-11-en-9-one 4,10-diacetate 2-benzoate 13-ester with (2R,3S)-N-benzoyl-3-phenylisoserine. Paclitaxel has the following structural formula. Paclitaxel, USP is a white to off-white crystalline powder with the empirical formula C 47H 51NO 14and a molecular weight of 853.9. It is highly lipophilic, insoluble in water, and melts at around 216° to 217°C.</Description>
</NDC>
<NDC>
<NDCCode>71919-705-09</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE, GLASS (71919-705-09) </PackageDescription>
<NDC11Code>71919-0705-09</NDC11Code>
<ProductNDC>71919-705</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Veratrum Album</ProprietaryName>
<NonProprietaryName>Veratrum Album</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110517</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>VERATRUM ALBUM ROOT</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>83254-705-50</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE (83254-705-50) </PackageDescription>
<NDC11Code>83254-0705-50</NDC11Code>
<ProductNDC>83254-705</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Povidone Iodine</ProprietaryName>
<NonProprietaryName>Povidone Iodine 7.5 Solution</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230504</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>M005</ApplicationNumber>
<LabelerName>1201258 Ontario Inc. O/A Nanz Pharma</LabelerName>
<SubstanceName>POVIDONE-IODINE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of athlete's foot, jock itch, and ringworm. For the effective relief of burning, cracking, discomfort, redness, scaling, soreness, and chafing that is associated with jock itch.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>84756-705-04</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE (84756-705-04) </PackageDescription>
<NDC11Code>84756-0705-04</NDC11Code>
<ProductNDC>84756-705</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Morocco Argan Oil Hair Treatment</ProprietaryName>
<NonProprietaryName>Morocco Argan Oil Hair Treatment</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241210</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Yiwu Ziqiu Import Export Co Ltd</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241210</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Apply twice daly(moring and night as a man and once as a woman.Afer apicaion, proeed with an acive masage for 3-5 minutes unthe product is fuy absorbed.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>49643-003-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-003-50) </PackageDescription>
<NDC11Code>49643-0003-50</NDC11Code>
<ProductNDC>49643-003</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Cattle Epithelia</ProprietaryName>
<NonProprietaryName>Cattle Epithelia</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>BOS TAURUS SKIN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-004-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-004-50) </PackageDescription>
<NDC11Code>49643-0004-50</NDC11Code>
<ProductNDC>49643-004</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Cotton Linters</ProprietaryName>
<NonProprietaryName>Cotton Linters</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>COTTON FIBER</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Plant Fiber Allergenic Extract [EPC], Plant Proteins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-005-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-005-50) </PackageDescription>
<NDC11Code>49643-0005-50</NDC11Code>
<ProductNDC>49643-005</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Cottonseed</ProprietaryName>
<NonProprietaryName>Cottonseed</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>COTTON SEED</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-006-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-006-50) </PackageDescription>
<NDC11Code>49643-0006-50</NDC11Code>
<ProductNDC>49643-006</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Dog Hair</ProprietaryName>
<NonProprietaryName>Dog Hair</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>CANIS LUPUS FAMILIARIS HAIR</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Animal Fur [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Hair Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-008-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-008-50) </PackageDescription>
<NDC11Code>49643-0008-50</NDC11Code>
<ProductNDC>49643-008</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>House Dust</ProprietaryName>
<NonProprietaryName>House Dust</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>HOUSE DUST</SubstanceName>
<StrengthNumber>.02</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], House Dust [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized House Dust Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-010-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-010-50) </PackageDescription>
<NDC11Code>49643-0010-50</NDC11Code>
<ProductNDC>49643-010</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Flaxseed</ProprietaryName>
<NonProprietaryName>Flaxseed</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>FLAX SEED</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-011-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-011-50) </PackageDescription>
<NDC11Code>49643-0011-50</NDC11Code>
<ProductNDC>49643-011</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Goat Epithelia</ProprietaryName>
<NonProprietaryName>Goat Epithelia</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>CAPRA HIRCUS SKIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-012-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-012-50) </PackageDescription>
<NDC11Code>49643-0012-50</NDC11Code>
<ProductNDC>49643-012</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Guinea Pig Epithelia</ProprietaryName>
<NonProprietaryName>Guinea Pig Epithelia</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>CAVIA PORCELLUS SKIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-013-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-013-50) </PackageDescription>
<NDC11Code>49643-0013-50</NDC11Code>
<ProductNDC>49643-013</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Hamster Epithelia</ProprietaryName>
<NonProprietaryName>Hamster Epithelia</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>MESOCRICETUS AURATUS SKIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
<NDC>
<NDCCode>49643-014-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49643-014-50) </PackageDescription>
<NDC11Code>49643-0014-50</NDC11Code>
<ProductNDC>49643-014</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Hog Epithelia</ProprietaryName>
<NonProprietaryName>Hog Epithelia</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>CUTANEOUS; INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740312</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102211</ApplicationNumber>
<LabelerName>Allermed Laboratories, Inc.</LabelerName>
<SubstanceName>SUS SCROFA SKIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19740312</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Allergenic extract may be used as a diagnostic skin test reagent in persons suspected of being sensitive to the allergenic source material from which the extract is made. Skin tests should be used in conjunction with a thorough allergic history to establish the relevance of a given allergen in the etiology of allergic disease. (4,5,6) Immunotherapy with allergenic extract is indicated in persons suffering from allergic rhinitis, bronchitis, conjunctivitis, urticaria and asthma. The therapeutic efficacy of allergenic extract has been proven in ragweed, grass, and mountain cedar pollinosis, cat-induced asthma and hypersensitivity to hymenoptera venoms. (7-12). Immunotherapy may be used along with or exclusive of antihistamines and other medications used to control allergic symptoms.</IndicationAndUsage>
<Description>Allergenic extract contains the aqueous extractables from allergenic source material in extracting solution containing 0.25% sodium chloride, 0.125% sodium bicarbonate, and 50% glycerol. 0.4% phenol is added as a preservative. The weight by volume value shown on the label is a measurement of extract concentration, rather than extract potency. Extracts for which U.S. standards exist are labeled in allergy units, in addition to w/v strength.</Description>
</NDC>
</NDCList>