{
"NDC": [
{
"NDCCode": "49884-789-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (49884-789-11) ",
"NDC11Code": "49884-0789-11",
"ProductNDC": "49884-789",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olmesartan Medoxomil / Amlodipine Besylate / Hydrochlorothiazide",
"NonProprietaryName": "Olmesartan Medoxomil / Amlodipine Besylate / Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20161026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206137",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "OLMESARTAN MEDOXOMIL; AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "40; 10; 12.5",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161026",
"SamplePackage": "N",
"IndicationAndUsage": "Olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Limitations of Use. This fixed combination drug is not indicated for the initial therapy of hypertension.",
"Description": "Olmesartan medoxomil, amlodipine and hydrochlorothiazide provided as a tablet for oral administration, is a fixed combination of olmesartan medoxomil (ARB), amlodipine (CCB), and hydrochlorothiazide (thiazide diuretic). Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6. The amlodipine besylate component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25CIN2O5C6H6O3S. The hydrochlorothiazide component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzo-thiazidiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8CIN3O4S2. The structural formula for olmesartan medoxomil is. The structural formula for amlodipine besylate is. The structural formula for hydrochlorothiazide is. Olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets contains olmesartan medoxomil, a white to light yellowish-white powder or crystalline powder, amlodipine besylate, a white to off-white crystalline powder, and hydrochlorothiazide, a white or practically white, crystalline powder. The molecular weights of olmesartan medoxomil, amlodipine besylate, and hydrochlorothiazide tablets are 558.6, 567.1, and 297.7, respectively. Olmesartan medoxomil is practically insoluble in water and sparingly soluble in methanol. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution. Each 20/5/12.5 mg tablet contains 20 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/5/12.5 mg tablet contains 40 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/5/25 mg tablet contains 40 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 25 mg of hydrochlorothiazide. Each 40/10/12.5 mg tablet contains 40 mg of olmesartan medoxomil, 10 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/10/25 mg tablet contains 40 mg of olmesartan medoxomil, 10 mg of amlodipine besylate and 25 mg of hydrochlorothiazide. Each tablet of olmesartan medoxomil, amlodipine besylate and hydrochlorothiazide also contains the following inactive ingredients: silicified microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, and magnesium stearate. The color coating for 20 /5 /12.5 mg, 40 /5 /25 mg tablets contains titanium dioxide, hypromellose, polyethylene glycol and polysorbate, the color coating for 40/10/25 mg and 40/5/12.5 mg tablets contains polyvinyl alcohol - part dehydrolyzed, titanium dioxide, polyethylene glycol, talc and iron oxide red and the color coating for 40 /10 /12.5 mg tablets polyvinyl alcohol - part dehydrolyzed, titanium dioxide, polyethylene glycol, talc iron oxide yellow and FD&C #6."
},
{
"NDCCode": "49884-789-09",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (49884-789-09) ",
"NDC11Code": "49884-0789-09",
"ProductNDC": "49884-789",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olmesartan Medoxomil / Amlodipine Besylate / Hydrochlorothiazide",
"NonProprietaryName": "Olmesartan Medoxomil / Amlodipine Besylate / Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20161026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206137",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "OLMESARTAN MEDOXOMIL; AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "40; 10; 12.5",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161026",
"SamplePackage": "N",
"IndicationAndUsage": "Olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Limitations of Use. This fixed combination drug is not indicated for the initial therapy of hypertension.",
"Description": "Olmesartan medoxomil, amlodipine and hydrochlorothiazide provided as a tablet for oral administration, is a fixed combination of olmesartan medoxomil (ARB), amlodipine (CCB), and hydrochlorothiazide (thiazide diuretic). Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6. The amlodipine besylate component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25CIN2O5C6H6O3S. The hydrochlorothiazide component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzo-thiazidiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8CIN3O4S2. The structural formula for olmesartan medoxomil is. The structural formula for amlodipine besylate is. The structural formula for hydrochlorothiazide is. Olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets contains olmesartan medoxomil, a white to light yellowish-white powder or crystalline powder, amlodipine besylate, a white to off-white crystalline powder, and hydrochlorothiazide, a white or practically white, crystalline powder. The molecular weights of olmesartan medoxomil, amlodipine besylate, and hydrochlorothiazide tablets are 558.6, 567.1, and 297.7, respectively. Olmesartan medoxomil is practically insoluble in water and sparingly soluble in methanol. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution. Each 20/5/12.5 mg tablet contains 20 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/5/12.5 mg tablet contains 40 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/5/25 mg tablet contains 40 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 25 mg of hydrochlorothiazide. Each 40/10/12.5 mg tablet contains 40 mg of olmesartan medoxomil, 10 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/10/25 mg tablet contains 40 mg of olmesartan medoxomil, 10 mg of amlodipine besylate and 25 mg of hydrochlorothiazide. Each tablet of olmesartan medoxomil, amlodipine besylate and hydrochlorothiazide also contains the following inactive ingredients: silicified microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, and magnesium stearate. The color coating for 20 /5 /12.5 mg, 40 /5 /25 mg tablets contains titanium dioxide, hypromellose, polyethylene glycol and polysorbate, the color coating for 40/10/25 mg and 40/5/12.5 mg tablets contains polyvinyl alcohol - part dehydrolyzed, titanium dioxide, polyethylene glycol, talc and iron oxide red and the color coating for 40 /10 /12.5 mg tablets polyvinyl alcohol - part dehydrolyzed, titanium dioxide, polyethylene glycol, talc iron oxide yellow and FD&C #6."
},
{
"NDCCode": "50268-789-15",
"PackageDescription": "50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-789-15) / 1 TABLET, FILM COATED in 1 BLISTER PACK (50268-789-11) ",
"NDC11Code": "50268-0789-15",
"ProductNDC": "50268-789",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090682",
"LabelerName": "AvPAK",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Active",
"LastUpdate": "2025-10-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140922",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir hydrochloride is a nucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1): 1 Cold Sores (Herpes Labialis), 2 Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode)Suppression in immunocompetent or HIV-infected patientsReduction of transmission, 3 Herpes Zoster .",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride USP (hydrous) equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients crospovidone, FD&C blue #2/indigo carmine aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula:. Valacyclovir hydrochloride USP (hydrous) is a white or almost white powder with the molecular formula C 13H 20N 6O 4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk as for valacyclovir hydrochloride are 1.90, 7.47, and 9.43."
},
{
"NDCCode": "55111-789-11",
"PackageDescription": "25 BLISTER PACK in 1 CARTON (55111-789-11) / 4 TABLET, FILM COATED in 1 BLISTER PACK (55111-789-48) ",
"NDC11Code": "55111-0789-11",
"ProductNDC": "55111-789",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sevelamer Carbonate",
"NonProprietaryName": "Sevelamer Carbonate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170929",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206094",
"LabelerName": "DR. REDDY'S LABORATORIES LIMITED",
"SubstanceName": "SEVELAMER CARBONATE",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181212",
"SamplePackage": "N",
"IndicationAndUsage": "Sevelamer carbonate tablets are indicated for the control of serum phosphorus in adults and children 6 years of age and older with chronic kidney disease (CKD) on dialysis.",
"Description": "The active ingredient in sevelamer carbonate tablet is sevelamer carbonate, a polymeric amine that binds phosphate and is meant for oral administration. It was developed as a pharmaceutical alternative to sevelamer hydrochloride. Sevelamer carbonate is an anion exchange resin, with the same polymeric structure as sevelamer hydrochloride, in which carbonate replaces chloride as the counterion. While the counterions differ for the two salts, the polymer itself, the active moiety involved in phosphate binding, is the same. Sevelamer carbonate is known chemically as poly(allylamine-co-N,N’-diallyl-1,3-diamino-2-hydroxypropane) carbonate salt. Sevelamer carbonate is hygroscopic, but insoluble in water. The structure is represented in Figure 1. Figure 1. Chemical Structure of Sevelamer Carbonate. a, b = number of primary amine groups a + b = 9. c = number of cross-linking groups c = 1. m = large number to indicate extended polymer network. Sevelamer carbonate Tablets: Each film-coated tablet of sevelamer carbonate contains 800 mg of sevelamer carbonate on an anhydrous basis. The inactive ingredients are ammonium hydroxide, colloidal silicon dioxide, crospovidone, hydroxypropyl cellulose, lecithin, mannitol, polyvinyl alcohol, propylene glycol, shellac, talc, xanthan gum and zinc stearate. The tablet imprint contains iron oxide black ink."
},
{
"NDCCode": "60687-789-01",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (60687-789-01) / 1 TABLET in 1 BLISTER PACK (60687-789-11) ",
"NDC11Code": "60687-0789-01",
"ProductNDC": "60687-789",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pyrazinamide",
"NonProprietaryName": "Pyrazinamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080157",
"LabelerName": "American Health Packaging",
"SubstanceName": "PYRAZINAMIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimycobacterial [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240220",
"SamplePackage": "N",
"IndicationAndUsage": "Pyrazinamide is indicated for the initial treatment of active tuberculosis in adults and children when combined with other antituberculous agents. (The current recommendation of the CDC for drug-susceptible disease is to use a six-month regimen for initial treatment of active tuberculosis, consisting of isoniazid, rifampin and pyrazinamide given for 2 months, followed by isoniazid and rifampin for 4 months. *4). (Patients with drug-resistant disease should be treated with regimens individualized to their situation. Pyrazinamide frequently will be an important component of such therapy.). (In patients with concomitant HIV infection, the physician should be aware of current recommendations of CDC. It is possible these patients may require a longer course of treatment.). It is also indicated after treatment failure with other primary drugs in any form of active tuberculosis. Pyrazinamide should only be used in conjunction with other effective antituberculous agents. *See recommendations of Center for Disease Control (CDC) and American Thoracic Society for complete regimen and dosage recommendations. 4.",
"Description": "Pyrazinamide, the pyrazine analogue of nicotinamide, is an antituberculous agent. It is a white crystalline powder, stable at room temperature, and sparingly soluble in water. Pyrazinamide has the following structural formula. Each pyrazinamide tablet for oral administration contains 500 mg of pyrazinamide and the following inactive ingredients: Corn Starch, Magnesium Stearate, Pregelatinized Starch and Stearic Acid."
},
{
"NDCCode": "62756-789-11",
"PackageDescription": "25 kg in 1 DRUM (62756-789-11) ",
"NDC11Code": "62756-0789-11",
"ProductNDC": "62756-789",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20210116",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "SUN PHARMACEUTICAL INDUSTRIES, INC.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "kg/25kg",
"Status": "Unfinished",
"LastUpdate": "2025-12-06",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "16-JAN-21"
},
{
"NDCCode": "68084-789-21",
"PackageDescription": "30 BLISTER PACK in 1 BOX, UNIT-DOSE (68084-789-21) > 1 TABLET in 1 BLISTER PACK (68084-789-11)",
"NDC11Code": "68084-0789-21",
"ProductNDC": "68084-789",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocortisone",
"NonProprietaryName": "Hydrocortisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140616",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040761",
"LabelerName": "American Health Packaging",
"SubstanceName": "HYDROCORTISONE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "49884-104-11",
"PackageDescription": "1 BOTTLE in 1 CARTON (49884-104-11) > 30 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "49884-0104-11",
"ProductNDC": "49884-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Entecavir",
"NonProprietaryName": "Entecavir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140818",
"EndMarketingDate": "20170831",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021797",
"LabelerName": "Par Pharmaceutical Inc.",
"SubstanceName": "ENTECAVIR",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [Chemical/Ingredient],Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-09-01"
},
{
"NDCCode": "49884-105-11",
"PackageDescription": "1 BOTTLE in 1 CARTON (49884-105-11) > 30 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "49884-0105-11",
"ProductNDC": "49884-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Entecavir",
"NonProprietaryName": "Entecavir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140818",
"EndMarketingDate": "20170831",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021797",
"LabelerName": "Par Pharmaceutical Inc.",
"SubstanceName": "ENTECAVIR",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [Chemical/Ingredient],Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-09-01"
},
{
"NDCCode": "49884-147-11",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (49884-147-11) ",
"NDC11Code": "49884-0147-11",
"ProductNDC": "49884-147",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexlansoprazole",
"NonProprietaryName": "Dexlansoprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20230610",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202294",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "DEXLANSOPRAZOLE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230610",
"SamplePackage": "N",
"IndicationAndUsage": "Dexlansoprazole is a proton pump inhibitor (PPI) indicated in patients 12 years of age and older for: 1 Healing of all grades of erosive esophagitis (EE). (1.1) , 2 Maintenance of healed EE and relief of heartburn. (1.2) , 3 Treatment of symptomatic non-erosive gastroesophageal reflux disease (GERD). (1.3) .",
"Description": "The active ingredient in dexlansoprazole delayed-release capsules, a proton pump inhibitor, is (+)-2-[(R)-{[3-methyl-4-(2,2,2-trifluoroethoxy)pyridin-2-yl] methyl} sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Dexlansoprazole is the R-enantiomer of lansoprazole (a racemic mixture of the R- and S-enantiomers). Its molecular formula is: C16H14F3N3O2S, with a molecular weight of 369.36. Dexlansoprazole has the following chemical structure. Dexlansoprazole is a white to off white crystalline powder which melts with decomposition at 143° to 144°C. Dexlansoprazole is practically insoluble in water, freely soluble in dimethylformamide, soluble in methanol, slightly soluble in ethyl acetate and acetonitrile, practically insoluble in hexane. Dexlansoprazole is stable when exposed to light. Dexlansoprazole is more stable in neutral and alkaline conditions than acidic conditions. Dexlansoprazole is supplied for oral administration as a dual delayed-release formulation in capsules. The capsules contain dexlansoprazole in a mixture of two types of enteric-coated granules with different pH-dependent dissolution profiles [see Clinical Pharmacology (12.3)]. Dexlansoprazole delayed-release capsules are available in two dosage strengths: 30 and 60 mg, per capsule. Each capsule contains enteric-coated granules consisting of dexlansoprazole (active ingredient) and the following inactive ingredients: calcium hydroxide, colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer, methacrylic acid copolymer type B, polyethylene glycol, polysorbate 80, sodium lauryl sulfate, sugar spheres, talc and triethyl citrate. The black imprinting ink contains: ammonium hydroxide, iron oxide black, isopropyl alcohol, N-butyl alcohol, propylene glycol and shellac glaze in ethanol. The capsule shells contain hypromellose and titanium dioxide. In addition, 60 mg contain FD&C Blue #1, FD&C Yellow #5*, and FD&C Yellow #6. *60 mg capsule contains FD&C Yellow No. 5 (tartrazine) [see Warnings and Precautions (5)]."
},
{
"NDCCode": "49884-148-11",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (49884-148-11) ",
"NDC11Code": "49884-0148-11",
"ProductNDC": "49884-148",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexlansoprazole",
"NonProprietaryName": "Dexlansoprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20221122",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202294",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "DEXLANSOPRAZOLE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221122",
"SamplePackage": "N",
"IndicationAndUsage": "Dexlansoprazole is a proton pump inhibitor (PPI) indicated in patients 12 years of age and older for: 1 Healing of all grades of erosive esophagitis (EE). (1.1) , 2 Maintenance of healed EE and relief of heartburn. (1.2) , 3 Treatment of symptomatic non-erosive gastroesophageal reflux disease (GERD). (1.3) .",
"Description": "The active ingredient in dexlansoprazole delayed-release capsules, a proton pump inhibitor, is (+)-2-[(R)-{[3-methyl-4-(2,2,2-trifluoroethoxy)pyridin-2-yl] methyl} sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Dexlansoprazole is the R-enantiomer of lansoprazole (a racemic mixture of the R- and S-enantiomers). Its molecular formula is: C16H14F3N3O2S, with a molecular weight of 369.36. Dexlansoprazole has the following chemical structure. Dexlansoprazole is a white to off white crystalline powder which melts with decomposition at 143° to 144°C. Dexlansoprazole is practically insoluble in water, freely soluble in dimethylformamide, soluble in methanol, slightly soluble in ethyl acetate and acetonitrile, practically insoluble in hexane. Dexlansoprazole is stable when exposed to light. Dexlansoprazole is more stable in neutral and alkaline conditions than acidic conditions. Dexlansoprazole is supplied for oral administration as a dual delayed-release formulation in capsules. The capsules contain dexlansoprazole in a mixture of two types of enteric-coated granules with different pH-dependent dissolution profiles [see Clinical Pharmacology (12.3)]. Dexlansoprazole delayed-release capsules are available in two dosage strengths: 30 and 60 mg, per capsule. Each capsule contains enteric-coated granules consisting of dexlansoprazole (active ingredient) and the following inactive ingredients: calcium hydroxide, colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer, methacrylic acid copolymer type B, polyethylene glycol, polysorbate 80, sodium lauryl sulfate, sugar spheres, talc and triethyl citrate. The black imprinting ink contains: ammonium hydroxide, iron oxide black, isopropyl alcohol, N-butyl alcohol, propylene glycol and shellac glaze in ethanol. The capsule shells contain hypromellose and titanium dioxide. In addition, 60 mg contain FD&C Blue #1, FD&C Yellow #5*, and FD&C Yellow #6. *60 mg capsule contains FD&C Yellow No. 5 (tartrazine) [see Warnings and Precautions (5)]."
},
{
"NDCCode": "49884-161-11",
"PackageDescription": "3.7 mL in 1 BOTTLE, GLASS (49884-161-11) ",
"NDC11Code": "49884-0161-11",
"ProductNDC": "49884-161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcitonin Salmon",
"NonProprietaryName": "Calcitonin Salmon",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20090608",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076979",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "CALCITONIN SALMON",
"StrengthNumber": "200",
"StrengthUnit": "[iU]/.09mL",
"Pharm_Classes": "Calcitonin [CS], Calcitonin [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090608",
"SamplePackage": "N",
"IndicationAndUsage": "Calcitonin Salmon Nasal Solution is a calcitonin, indicated for the treatment of postmenopausal osteoporosis in women greater than 5 years postmenopause when alternative treatments are not suitable. Fracture reduction efficacy has not been demonstrated. (1.1). Limitations of Use: 1 Due to the possible association between malignancy and calcitonin-salmon use, the need for continued therapy should be re-evaluated on a periodic basis. (1.2, 5.4), 2 Calcitonin Salmon Nasal Solution has not been shown to increase bone mineral density in early postmenopausal women (1.2).",
"Description": "Calcitonin is a polypeptide hormone secreted by the parafollicular cells of the thyroid gland in mammals and by the ultimobranchial gland of birds and fish. Calcitonin Salmon Nasal Solution is a synthetic polypeptide of 32 amino acids in the same linear sequence that is found in calcitonin of salmon origin. This is shown by the following graphic formula. It is provided in a 3.7 mL fill glass bottle as a solution for nasal administration. This is sufficient medication for 30 doses. Active Ingredient: calcitonin-salmon, 2200 International Units per mL (corresponding to 200 International Units per 0.09 mL actuation). Inactive Ingredients: sodium chloride, chlorobutanol (possesses a characteristic odor), hydrochloric acid (added as necessary to adjust pH), purified water and nitrogen. The activity of Calcitonin Salmon Nasal Solution is stated in International Units based on bioassay in comparison with the International Reference Preparation of calcitonin-salmon for Bioassay, distributed by the National Institute of Biological Standards and Control, Holly Hill, London."
},
{
"NDCCode": "49884-171-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (49884-171-11) ",
"NDC11Code": "49884-0171-11",
"ProductNDC": "49884-171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colchicine",
"NonProprietaryName": "Colchicine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220927",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203976",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "COLCHICINE",
"StrengthNumber": ".6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkaloid [EPC], Alkaloids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220927",
"SamplePackage": "N",
"IndicationAndUsage": "Colchicine tablets, USP are an alkaloid indicated for: 1 Prophylaxis and treatment of gout flares in adults (1.1)., 2 Familial Mediterranean fever (FMF) in adults and children 4 years or older (1.2).",
"Description": "Colchicine, USP is an alkaloid chemically described as (S)N- (5,6,7,9-tetrahydro-1,2,3,10-tetramethoxy-9-oxobenzo [alpha] heptalen-7-yl) acetamide with a molecular formula of C22H25NO6 and a molecular weight of 399.4. The structural formula of colchicine is given below. Colchicine, USP occurs as a pale yellow powder that is soluble in water. Colchicine Tablets, USP are supplied for oral administration as purple, film coated, modified capsule-shaped tablets (0.1575” × 0.3030”), debossed with “p171” on one side and bisect on the other, containing 0.6 mg of the active ingredient colchicine USP. Inactive ingredients: FD&C blue #2, FD&C red #40, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch (botanical source: corn starch), sodium starch glycolate, titanium dioxide, and triacetin."
},
{
"NDCCode": "49884-172-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (49884-172-11) ",
"NDC11Code": "49884-0172-11",
"ProductNDC": "49884-172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine, Valsartan, Hydrochlorothiazide",
"NonProprietaryName": "Amlodipine Besylate Valsartan Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150601",
"EndMarketingDate": "20220531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201087",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "5; 12.5; 160",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150601",
"EndMarketingDatePackage": "20220531",
"SamplePackage": "N"
},
{
"NDCCode": "49884-173-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (49884-173-11) ",
"NDC11Code": "49884-0173-11",
"ProductNDC": "49884-173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine, Valsartan, Hydrochlorothiazide",
"NonProprietaryName": "Amlodipine Besylate Valsartan Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150601",
"EndMarketingDate": "20220531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201087",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "5; 25; 160",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150601",
"EndMarketingDatePackage": "20220531",
"SamplePackage": "N"
},
{
"NDCCode": "49884-174-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (49884-174-11) ",
"NDC11Code": "49884-0174-11",
"ProductNDC": "49884-174",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine, Valsartan, Hydrochlorothiazide",
"NonProprietaryName": "Amlodipine Besylate Valsartan Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150601",
"EndMarketingDate": "20220531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201087",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "10; 12.5; 160",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150601",
"EndMarketingDatePackage": "20220531",
"SamplePackage": "N"
},
{
"NDCCode": "49884-175-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (49884-175-11) ",
"NDC11Code": "49884-0175-11",
"ProductNDC": "49884-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine, Valsartan, Hydrochlorothiazide",
"NonProprietaryName": "Amlodipine Besylate Valsartan Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150601",
"EndMarketingDate": "20220531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201087",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "10; 25; 320",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150601",
"EndMarketingDatePackage": "20220531",
"SamplePackage": "N"
},
{
"NDCCode": "49884-185-11",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (49884-185-11) ",
"NDC11Code": "49884-0185-11",
"ProductNDC": "49884-185",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine, Valsartan, Hydrochlorothiazide",
"NonProprietaryName": "Amlodipine Besylate Valsartan Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150601",
"EndMarketingDate": "20220531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201087",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "10; 25; 160",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150601",
"EndMarketingDatePackage": "20220531",
"SamplePackage": "N"
},
{
"NDCCode": "49884-228-11",
"PackageDescription": "30 TABLET in 1 BOTTLE (49884-228-11) ",
"NDC11Code": "49884-0228-11",
"ProductNDC": "49884-228",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ezetimibe",
"NonProprietaryName": "Ezetimibe",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20161212",
"EndMarketingDate": "20200331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078560",
"LabelerName": "Par Pharmaceutical Inc",
"SubstanceName": "EZETIMIBE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Cholesterol Absorption [PE],Dietary Cholesterol Absorption Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-04-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20161212",
"EndMarketingDatePackage": "20200331",
"SamplePackage": "N"
},
{
"NDCCode": "49884-232-11",
"PackageDescription": "30 TABLET in 1 BOTTLE (49884-232-11) ",
"NDC11Code": "49884-0232-11",
"ProductNDC": "49884-232",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130915",
"EndMarketingDate": "20200731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202542",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "23",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20130915",
"EndMarketingDatePackage": "20200731",
"SamplePackage": "N"
},
{
"NDCCode": "49884-236-11",
"PackageDescription": "30 TABLET in 1 BOTTLE (49884-236-11) ",
"NDC11Code": "49884-0236-11",
"ProductNDC": "49884-236",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20001215",
"EndMarketingDate": "20200630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065070",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20001215",
"EndMarketingDatePackage": "20200630",
"SamplePackage": "N"
},
{
"NDCCode": "49884-239-11",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (49884-239-11) ",
"NDC11Code": "49884-0239-11",
"ProductNDC": "49884-239",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Itraconazole",
"NonProprietaryName": "Itraconazole",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160701",
"EndMarketingDate": "20250731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205724",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "ITRACONAZOLE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160701",
"EndMarketingDatePackage": "20250731",
"SamplePackage": "N",
"IndicationAndUsage": "Itraconazole capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients. 1. Blastomycosis, pulmonary and extrapulmonary. 2. Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and. 3. Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy. Specimens for fungal cultures and other relevant laboratory studies (wet mount, histopathology, serology) should be obtained before therapy to isolate and identify causative organisms. Therapy may be instituted before the results of the cultures and other laboratory studies are known; however, once these results become available, antiinfective therapy should be adjusted accordingly. Itraconazole capsules are also indicated for the treatment of the following fungal infections in non-immunocompromised patients. 1. Onychomycosis of the toenail, with or without fingernail involvement, due to dermatophytes (tinea unguium), and. 2. Onychomycosis of the fingernail due to dermatophytes (tinea unguium). Prior to initiating treatment, appropriate nail specimens for laboratory testing (KOH preparation, fungal culture, or nail biopsy) should be obtained to confirm the diagnosis of onychomycosis. (See CLINICAL PHARMACOLOGY: Special Populations, CONTRAINDICATIONS, WARNINGS, and ADVERSE REACTIONS: Post-marketing Experience for more information.).",
"Description": "Itraconazole is an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2R*,4S*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1 ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one mixture with (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2S*,4R*)-2-(2,4-dichlorophenyl)-2-(1H1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4triazolin-5-one. or. (±)-1-[(RS)-sec-butyl]-4-[p-[4-[p-[[(2R,4S)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C35H38Cl2N8O4 and a molecular weight of 705.64. It is a white to almost white powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. Itraconazole capsules contain 100 mg of itraconazole coated on sugar spheres. Inactive ingredients are gelatin capsule, hypromellose, Polyethylene Glycol and Sugar spheres (composed of sucrose, corn starch, and purified water). Gelatin capsules include gelatin and titanium dioxide. Black ink contains Propylene Glycol and Iron Oxide Black."
},
{
"NDCCode": "49884-250-11",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (49884-250-11) ",
"NDC11Code": "49884-0250-11",
"ProductNDC": "49884-250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine And Fluoxetine",
"NonProprietaryName": "Olanzapine And Fuoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20121126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077742",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "OLANZAPINE; FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "6; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121126",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine and fluoxetine capsules are indicated for the treatment of: 1 Acute depressive episodes in Bipolar I Disorder [see Clinical Studies (14.1)]. , 2 Treatment resistant depression (Major Depressive Disorder in patient who do not respond to 2 separate trials of different antidepressants of adequate dose and duration in the current episode) [see Clinical Studies (14.2)].",
"Description": "Olanzapine and Fluoxetine Capsules, USP combines an atypical antipsychotic and a selective serotonin reuptake inhibitor, olanzapine (the active ingredient in Zyprexa, and Zyprexa Zydis) and fluoxetine hydrochloride (the active ingredient in Prozac and Sarafem). Olanzapine belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H- thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. Fluoxetine hydrochloride is a selective serotonin reuptake inhibitor (SSRI). The chemical designation is (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride. The molecular formula is C17H18F3NOHCl, which corresponds to a molecular weight of 345.79. The chemical structures are:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Olanzapine and Fluoxetine Capsules, USP are available for oral administration in the following strength combinations. Each capsule consists of gelatin, magnesium stearate, partially pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 3 mg/25 mg capsule also contains red iron oxide; the 6 mg/50 mg capsule also contains FD&C blue No. 2, FD&C red No. 3, and FD&C yellow No. 6; the 12 mg/25 mg capsule also contains D&C red No. 28, FD&C blue No. 1, FD&C red No. 40, and red iron oxide; and the 12 mg/50 mg capsule also contains D&C red No. 28, FD&C blue No. 1 FD&C blue No. 2, FD&C red No. 3, FD&C red No. 40, and FD&C yellow No. 6. The capsules also have printing in edible black ink which contains the following ingredients: D&C yellow No. 10, ethanol, FD&C blue No. 1, FD&C blue No. 2, FD&C red No. 40, iron oxide black, methanol, n-Butyl alcohol, propylene glycol, and shellac glaze in alcohol."
},
{
"NDCCode": "49884-251-11",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (49884-251-11) ",
"NDC11Code": "49884-0251-11",
"ProductNDC": "49884-251",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine And Fluoxetine",
"NonProprietaryName": "Olanzapine And Fuoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20121126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077742",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "OLANZAPINE; FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "6; 50",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121126",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine and fluoxetine capsules are indicated for the treatment of: 1 Acute depressive episodes in Bipolar I Disorder [see Clinical Studies (14.1)]. , 2 Treatment resistant depression (Major Depressive Disorder in patient who do not respond to 2 separate trials of different antidepressants of adequate dose and duration in the current episode) [see Clinical Studies (14.2)].",
"Description": "Olanzapine and Fluoxetine Capsules, USP combines an atypical antipsychotic and a selective serotonin reuptake inhibitor, olanzapine (the active ingredient in Zyprexa, and Zyprexa Zydis) and fluoxetine hydrochloride (the active ingredient in Prozac and Sarafem). Olanzapine belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H- thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. Fluoxetine hydrochloride is a selective serotonin reuptake inhibitor (SSRI). The chemical designation is (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride. The molecular formula is C17H18F3NOHCl, which corresponds to a molecular weight of 345.79. The chemical structures are:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Olanzapine and Fluoxetine Capsules, USP are available for oral administration in the following strength combinations. Each capsule consists of gelatin, magnesium stearate, partially pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 3 mg/25 mg capsule also contains red iron oxide; the 6 mg/50 mg capsule also contains FD&C blue No. 2, FD&C red No. 3, and FD&C yellow No. 6; the 12 mg/25 mg capsule also contains D&C red No. 28, FD&C blue No. 1, FD&C red No. 40, and red iron oxide; and the 12 mg/50 mg capsule also contains D&C red No. 28, FD&C blue No. 1 FD&C blue No. 2, FD&C red No. 3, FD&C red No. 40, and FD&C yellow No. 6. The capsules also have printing in edible black ink which contains the following ingredients: D&C yellow No. 10, ethanol, FD&C blue No. 1, FD&C blue No. 2, FD&C red No. 40, iron oxide black, methanol, n-Butyl alcohol, propylene glycol, and shellac glaze in alcohol."
},
{
"NDCCode": "49884-252-11",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (49884-252-11) ",
"NDC11Code": "49884-0252-11",
"ProductNDC": "49884-252",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine And Fluoxetine",
"NonProprietaryName": "Olanzapine And Fuoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20121126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077742",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "OLANZAPINE; FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "12; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121126",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine and fluoxetine capsules are indicated for the treatment of: 1 Acute depressive episodes in Bipolar I Disorder [see Clinical Studies (14.1)]. , 2 Treatment resistant depression (Major Depressive Disorder in patient who do not respond to 2 separate trials of different antidepressants of adequate dose and duration in the current episode) [see Clinical Studies (14.2)].",
"Description": "Olanzapine and Fluoxetine Capsules, USP combines an atypical antipsychotic and a selective serotonin reuptake inhibitor, olanzapine (the active ingredient in Zyprexa, and Zyprexa Zydis) and fluoxetine hydrochloride (the active ingredient in Prozac and Sarafem). Olanzapine belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H- thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. Fluoxetine hydrochloride is a selective serotonin reuptake inhibitor (SSRI). The chemical designation is (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride. The molecular formula is C17H18F3NOHCl, which corresponds to a molecular weight of 345.79. The chemical structures are:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Olanzapine and Fluoxetine Capsules, USP are available for oral administration in the following strength combinations. Each capsule consists of gelatin, magnesium stearate, partially pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 3 mg/25 mg capsule also contains red iron oxide; the 6 mg/50 mg capsule also contains FD&C blue No. 2, FD&C red No. 3, and FD&C yellow No. 6; the 12 mg/25 mg capsule also contains D&C red No. 28, FD&C blue No. 1, FD&C red No. 40, and red iron oxide; and the 12 mg/50 mg capsule also contains D&C red No. 28, FD&C blue No. 1 FD&C blue No. 2, FD&C red No. 3, FD&C red No. 40, and FD&C yellow No. 6. The capsules also have printing in edible black ink which contains the following ingredients: D&C yellow No. 10, ethanol, FD&C blue No. 1, FD&C blue No. 2, FD&C red No. 40, iron oxide black, methanol, n-Butyl alcohol, propylene glycol, and shellac glaze in alcohol."
},
{
"NDCCode": "49884-253-11",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (49884-253-11) ",
"NDC11Code": "49884-0253-11",
"ProductNDC": "49884-253",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine And Fluoxetine",
"NonProprietaryName": "Olanzapine And Fuoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20121126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077742",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "OLANZAPINE; FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "12; 50",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121126",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine and fluoxetine capsules are indicated for the treatment of: 1 Acute depressive episodes in Bipolar I Disorder [see Clinical Studies (14.1)]. , 2 Treatment resistant depression (Major Depressive Disorder in patient who do not respond to 2 separate trials of different antidepressants of adequate dose and duration in the current episode) [see Clinical Studies (14.2)].",
"Description": "Olanzapine and Fluoxetine Capsules, USP combines an atypical antipsychotic and a selective serotonin reuptake inhibitor, olanzapine (the active ingredient in Zyprexa, and Zyprexa Zydis) and fluoxetine hydrochloride (the active ingredient in Prozac and Sarafem). Olanzapine belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H- thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. Fluoxetine hydrochloride is a selective serotonin reuptake inhibitor (SSRI). The chemical designation is (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride. The molecular formula is C17H18F3NOHCl, which corresponds to a molecular weight of 345.79. The chemical structures are:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Olanzapine and Fluoxetine Capsules, USP are available for oral administration in the following strength combinations. Each capsule consists of gelatin, magnesium stearate, partially pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 3 mg/25 mg capsule also contains red iron oxide; the 6 mg/50 mg capsule also contains FD&C blue No. 2, FD&C red No. 3, and FD&C yellow No. 6; the 12 mg/25 mg capsule also contains D&C red No. 28, FD&C blue No. 1, FD&C red No. 40, and red iron oxide; and the 12 mg/50 mg capsule also contains D&C red No. 28, FD&C blue No. 1 FD&C blue No. 2, FD&C red No. 3, FD&C red No. 40, and FD&C yellow No. 6. The capsules also have printing in edible black ink which contains the following ingredients: D&C yellow No. 10, ethanol, FD&C blue No. 1, FD&C blue No. 2, FD&C red No. 40, iron oxide black, methanol, n-Butyl alcohol, propylene glycol, and shellac glaze in alcohol."
},
{
"NDCCode": "49884-263-11",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (49884-263-11) ",
"NDC11Code": "49884-0263-11",
"ProductNDC": "49884-263",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160719",
"EndMarketingDate": "20200630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079168",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160719",
"EndMarketingDatePackage": "20200630",
"SamplePackage": "N"
},
{
"NDCCode": "49884-268-11",
"PackageDescription": "30 PACKET in 1 CARTON (49884-268-11) / 1 POWDER, FOR SUSPENSION in 1 PACKET (49884-268-52) ",
"NDC11Code": "49884-0268-11",
"ProductNDC": "49884-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole/sodium Bicarbonate",
"NonProprietaryName": "Omeprazole And Sodium Bicarbonate",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20160718",
"EndMarketingDate": "20231231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079182",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "OMEPRAZOLE; SODIUM BICARBONATE",
"StrengthNumber": "20; 1680",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Alkalinizing Activity [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160718",
"EndMarketingDatePackage": "20231231",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole and sodium bicarbonate for oral suspension is indicated in adults for the: 1 short-term treatment of active duodenal ulcer. Most patients heal within four weeks. Some patients may require an additional four weeks of therapy. .",
"Description": "Omeprazole and sodium bicarbonate for oral suspension is a combination of omeprazole, a proton-pump inhibitor, and sodium bicarbonate, an antacid. Omeprazole is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole, a racemic mixture of two enantiomers that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder which melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole and sodium bicarbonate is supplied as unit dose packets for oral suspension. Packets of powder for oral suspension contain either 40 mg or 20 mg of omeprazole and 1680 mg of sodium bicarbonate with the following excipients: xylitol, xanthan gum, sucralose powder, peach powder, sucrose and peppermint flavor. Omeprazole and sodium bicarbonate for oral suspension is immediate-release formulations that contain sodium bicarbonate which raises the gastric pH and thus protects omeprazole from acid degradation."
},
{
"NDCCode": "49884-269-11",
"PackageDescription": "30 PACKET in 1 CARTON (49884-269-11) / 1 POWDER, FOR SUSPENSION in 1 PACKET (49884-269-52) ",
"NDC11Code": "49884-0269-11",
"ProductNDC": "49884-269",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole/sodium Bicarbonate",
"NonProprietaryName": "Omeprazole And Sodium Bicarbonate",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20160718",
"EndMarketingDate": "20241130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079182",
"LabelerName": "Par Pharmaceutical, Inc.",
"SubstanceName": "OMEPRAZOLE; SODIUM BICARBONATE",
"StrengthNumber": "40; 1680",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Alkalinizing Activity [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160718",
"EndMarketingDatePackage": "20241130",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole and sodium bicarbonate for oral suspension is indicated in adults for the: 1 short-term treatment of active duodenal ulcer. Most patients heal within four weeks. Some patients may require an additional four weeks of therapy. .",
"Description": "Omeprazole and sodium bicarbonate for oral suspension is a combination of omeprazole, a proton-pump inhibitor, and sodium bicarbonate, an antacid. Omeprazole is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole, a racemic mixture of two enantiomers that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder which melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole and sodium bicarbonate is supplied as unit dose packets for oral suspension. Packets of powder for oral suspension contain either 40 mg or 20 mg of omeprazole and 1680 mg of sodium bicarbonate with the following excipients: xylitol, xanthan gum, sucralose powder, peach powder, sucrose and peppermint flavor. Omeprazole and sodium bicarbonate for oral suspension is immediate-release formulations that contain sodium bicarbonate which raises the gastric pH and thus protects omeprazole from acid degradation."
},
{
"NDCCode": "49884-277-11",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (49884-277-11) ",
"NDC11Code": "49884-0277-11",
"ProductNDC": "49884-277",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine And Fluoxetine",
"NonProprietaryName": "Olanzapine And Fuoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20121126",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077742",
"LabelerName": "Par Health USA, LLC",
"SubstanceName": "OLANZAPINE; FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "3; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121126",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine and fluoxetine capsules are indicated for the treatment of: 1 Acute depressive episodes in Bipolar I Disorder [see Clinical Studies (14.1)]. , 2 Treatment resistant depression (Major Depressive Disorder in patient who do not respond to 2 separate trials of different antidepressants of adequate dose and duration in the current episode) [see Clinical Studies (14.2)].",
"Description": "Olanzapine and Fluoxetine Capsules, USP combines an atypical antipsychotic and a selective serotonin reuptake inhibitor, olanzapine (the active ingredient in Zyprexa, and Zyprexa Zydis) and fluoxetine hydrochloride (the active ingredient in Prozac and Sarafem). Olanzapine belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H- thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. Fluoxetine hydrochloride is a selective serotonin reuptake inhibitor (SSRI). The chemical designation is (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride. The molecular formula is C17H18F3NOHCl, which corresponds to a molecular weight of 345.79. The chemical structures are:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Olanzapine and Fluoxetine Capsules, USP are available for oral administration in the following strength combinations. Each capsule consists of gelatin, magnesium stearate, partially pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 3 mg/25 mg capsule also contains red iron oxide; the 6 mg/50 mg capsule also contains FD&C blue No. 2, FD&C red No. 3, and FD&C yellow No. 6; the 12 mg/25 mg capsule also contains D&C red No. 28, FD&C blue No. 1, FD&C red No. 40, and red iron oxide; and the 12 mg/50 mg capsule also contains D&C red No. 28, FD&C blue No. 1 FD&C blue No. 2, FD&C red No. 3, FD&C red No. 40, and FD&C yellow No. 6. The capsules also have printing in edible black ink which contains the following ingredients: D&C yellow No. 10, ethanol, FD&C blue No. 1, FD&C blue No. 2, FD&C red No. 40, iron oxide black, methanol, n-Butyl alcohol, propylene glycol, and shellac glaze in alcohol."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>49884-789-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (49884-789-11) </PackageDescription>
<NDC11Code>49884-0789-11</NDC11Code>
<ProductNDC>49884-789</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olmesartan Medoxomil / Amlodipine Besylate / Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Olmesartan Medoxomil / Amlodipine Besylate / Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206137</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>OLMESARTAN MEDOXOMIL; AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>40; 10; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Limitations of Use. This fixed combination drug is not indicated for the initial therapy of hypertension.</IndicationAndUsage>
<Description>Olmesartan medoxomil, amlodipine and hydrochlorothiazide provided as a tablet for oral administration, is a fixed combination of olmesartan medoxomil (ARB), amlodipine (CCB), and hydrochlorothiazide (thiazide diuretic). Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6. The amlodipine besylate component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25CIN2O5C6H6O3S. The hydrochlorothiazide component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzo-thiazidiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8CIN3O4S2. The structural formula for olmesartan medoxomil is. The structural formula for amlodipine besylate is. The structural formula for hydrochlorothiazide is. Olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets contains olmesartan medoxomil, a white to light yellowish-white powder or crystalline powder, amlodipine besylate, a white to off-white crystalline powder, and hydrochlorothiazide, a white or practically white, crystalline powder. The molecular weights of olmesartan medoxomil, amlodipine besylate, and hydrochlorothiazide tablets are 558.6, 567.1, and 297.7, respectively. Olmesartan medoxomil is practically insoluble in water and sparingly soluble in methanol. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution. Each 20/5/12.5 mg tablet contains 20 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/5/12.5 mg tablet contains 40 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/5/25 mg tablet contains 40 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 25 mg of hydrochlorothiazide. Each 40/10/12.5 mg tablet contains 40 mg of olmesartan medoxomil, 10 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/10/25 mg tablet contains 40 mg of olmesartan medoxomil, 10 mg of amlodipine besylate and 25 mg of hydrochlorothiazide. Each tablet of olmesartan medoxomil, amlodipine besylate and hydrochlorothiazide also contains the following inactive ingredients: silicified microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, and magnesium stearate. The color coating for 20 /5 /12.5 mg, 40 /5 /25 mg tablets contains titanium dioxide, hypromellose, polyethylene glycol and polysorbate, the color coating for 40/10/25 mg and 40/5/12.5 mg tablets contains polyvinyl alcohol - part dehydrolyzed, titanium dioxide, polyethylene glycol, talc and iron oxide red and the color coating for 40 /10 /12.5 mg tablets polyvinyl alcohol - part dehydrolyzed, titanium dioxide, polyethylene glycol, talc iron oxide yellow and FD&C #6.</Description>
</NDC>
<NDC>
<NDCCode>49884-789-09</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (49884-789-09) </PackageDescription>
<NDC11Code>49884-0789-09</NDC11Code>
<ProductNDC>49884-789</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olmesartan Medoxomil / Amlodipine Besylate / Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Olmesartan Medoxomil / Amlodipine Besylate / Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206137</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>OLMESARTAN MEDOXOMIL; AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>40; 10; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets are indicated for the treatment of hypertension, alone or with other antihypertensive agents, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Limitations of Use. This fixed combination drug is not indicated for the initial therapy of hypertension.</IndicationAndUsage>
<Description>Olmesartan medoxomil, amlodipine and hydrochlorothiazide provided as a tablet for oral administration, is a fixed combination of olmesartan medoxomil (ARB), amlodipine (CCB), and hydrochlorothiazide (thiazide diuretic). Olmesartan medoxomil, a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. The olmesartan medoxomil component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6. The amlodipine besylate component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25CIN2O5C6H6O3S. The hydrochlorothiazide component of olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzo-thiazidiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8CIN3O4S2. The structural formula for olmesartan medoxomil is. The structural formula for amlodipine besylate is. The structural formula for hydrochlorothiazide is. Olmesartan medoxomil, amlodipine and hydrochlorothiazide tablets contains olmesartan medoxomil, a white to light yellowish-white powder or crystalline powder, amlodipine besylate, a white to off-white crystalline powder, and hydrochlorothiazide, a white or practically white, crystalline powder. The molecular weights of olmesartan medoxomil, amlodipine besylate, and hydrochlorothiazide tablets are 558.6, 567.1, and 297.7, respectively. Olmesartan medoxomil is practically insoluble in water and sparingly soluble in methanol. Amlodipine besylate is slightly soluble in water and sparingly soluble in ethanol. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution. Each 20/5/12.5 mg tablet contains 20 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/5/12.5 mg tablet contains 40 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/5/25 mg tablet contains 40 mg of olmesartan medoxomil, 5 mg of amlodipine besylate and 25 mg of hydrochlorothiazide. Each 40/10/12.5 mg tablet contains 40 mg of olmesartan medoxomil, 10 mg of amlodipine besylate and 12.5 mg of hydrochlorothiazide. Each 40/10/25 mg tablet contains 40 mg of olmesartan medoxomil, 10 mg of amlodipine besylate and 25 mg of hydrochlorothiazide. Each tablet of olmesartan medoxomil, amlodipine besylate and hydrochlorothiazide also contains the following inactive ingredients: silicified microcrystalline cellulose, pregelatinized starch, croscarmellose sodium, and magnesium stearate. The color coating for 20 /5 /12.5 mg, 40 /5 /25 mg tablets contains titanium dioxide, hypromellose, polyethylene glycol and polysorbate, the color coating for 40/10/25 mg and 40/5/12.5 mg tablets contains polyvinyl alcohol - part dehydrolyzed, titanium dioxide, polyethylene glycol, talc and iron oxide red and the color coating for 40 /10 /12.5 mg tablets polyvinyl alcohol - part dehydrolyzed, titanium dioxide, polyethylene glycol, talc iron oxide yellow and FD&C #6.</Description>
</NDC>
<NDC>
<NDCCode>50268-789-15</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-789-15) / 1 TABLET, FILM COATED in 1 BLISTER PACK (50268-789-11) </PackageDescription>
<NDC11Code>50268-0789-15</NDC11Code>
<ProductNDC>50268-789</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090682</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir hydrochloride is a nucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1): 1 Cold Sores (Herpes Labialis), 2 Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode)Suppression in immunocompetent or HIV-infected patientsReduction of transmission, 3 Herpes Zoster .</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride USP (hydrous) equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients crospovidone, FD&C blue #2/indigo carmine aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula:. Valacyclovir hydrochloride USP (hydrous) is a white or almost white powder with the molecular formula C 13H 20N 6O 4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk as for valacyclovir hydrochloride are 1.90, 7.47, and 9.43.</Description>
</NDC>
<NDC>
<NDCCode>55111-789-11</NDCCode>
<PackageDescription>25 BLISTER PACK in 1 CARTON (55111-789-11) / 4 TABLET, FILM COATED in 1 BLISTER PACK (55111-789-48) </PackageDescription>
<NDC11Code>55111-0789-11</NDC11Code>
<ProductNDC>55111-789</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sevelamer Carbonate</ProprietaryName>
<NonProprietaryName>Sevelamer Carbonate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170929</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206094</ApplicationNumber>
<LabelerName>DR. REDDY'S LABORATORIES LIMITED</LabelerName>
<SubstanceName>SEVELAMER CARBONATE</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sevelamer carbonate tablets are indicated for the control of serum phosphorus in adults and children 6 years of age and older with chronic kidney disease (CKD) on dialysis.</IndicationAndUsage>
<Description>The active ingredient in sevelamer carbonate tablet is sevelamer carbonate, a polymeric amine that binds phosphate and is meant for oral administration. It was developed as a pharmaceutical alternative to sevelamer hydrochloride. Sevelamer carbonate is an anion exchange resin, with the same polymeric structure as sevelamer hydrochloride, in which carbonate replaces chloride as the counterion. While the counterions differ for the two salts, the polymer itself, the active moiety involved in phosphate binding, is the same. Sevelamer carbonate is known chemically as poly(allylamine-co-N,N’-diallyl-1,3-diamino-2-hydroxypropane) carbonate salt. Sevelamer carbonate is hygroscopic, but insoluble in water. The structure is represented in Figure 1. Figure 1. Chemical Structure of Sevelamer Carbonate. a, b = number of primary amine groups a + b = 9. c = number of cross-linking groups c = 1. m = large number to indicate extended polymer network. Sevelamer carbonate Tablets: Each film-coated tablet of sevelamer carbonate contains 800 mg of sevelamer carbonate on an anhydrous basis. The inactive ingredients are ammonium hydroxide, colloidal silicon dioxide, crospovidone, hydroxypropyl cellulose, lecithin, mannitol, polyvinyl alcohol, propylene glycol, shellac, talc, xanthan gum and zinc stearate. The tablet imprint contains iron oxide black ink.</Description>
</NDC>
<NDC>
<NDCCode>60687-789-01</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (60687-789-01) / 1 TABLET in 1 BLISTER PACK (60687-789-11) </PackageDescription>
<NDC11Code>60687-0789-01</NDC11Code>
<ProductNDC>60687-789</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pyrazinamide</ProprietaryName>
<NonProprietaryName>Pyrazinamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080157</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>PYRAZINAMIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimycobacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pyrazinamide is indicated for the initial treatment of active tuberculosis in adults and children when combined with other antituberculous agents. (The current recommendation of the CDC for drug-susceptible disease is to use a six-month regimen for initial treatment of active tuberculosis, consisting of isoniazid, rifampin and pyrazinamide given for 2 months, followed by isoniazid and rifampin for 4 months. *4). (Patients with drug-resistant disease should be treated with regimens individualized to their situation. Pyrazinamide frequently will be an important component of such therapy.). (In patients with concomitant HIV infection, the physician should be aware of current recommendations of CDC. It is possible these patients may require a longer course of treatment.). It is also indicated after treatment failure with other primary drugs in any form of active tuberculosis. Pyrazinamide should only be used in conjunction with other effective antituberculous agents. *See recommendations of Center for Disease Control (CDC) and American Thoracic Society for complete regimen and dosage recommendations. 4.</IndicationAndUsage>
<Description>Pyrazinamide, the pyrazine analogue of nicotinamide, is an antituberculous agent. It is a white crystalline powder, stable at room temperature, and sparingly soluble in water. Pyrazinamide has the following structural formula. Each pyrazinamide tablet for oral administration contains 500 mg of pyrazinamide and the following inactive ingredients: Corn Starch, Magnesium Stearate, Pregelatinized Starch and Stearic Acid.</Description>
</NDC>
<NDC>
<NDCCode>62756-789-11</NDCCode>
<PackageDescription>25 kg in 1 DRUM (62756-789-11) </PackageDescription>
<NDC11Code>62756-0789-11</NDC11Code>
<ProductNDC>62756-789</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20210116</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>SUN PHARMACEUTICAL INDUSTRIES, INC.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>kg/25kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-12-06</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>16-JAN-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>68084-789-21</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 BOX, UNIT-DOSE (68084-789-21) > 1 TABLET in 1 BLISTER PACK (68084-789-11)</PackageDescription>
<NDC11Code>68084-0789-21</NDC11Code>
<ProductNDC>68084-789</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocortisone</ProprietaryName>
<NonProprietaryName>Hydrocortisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140616</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040761</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>HYDROCORTISONE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>49884-104-11</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (49884-104-11) > 30 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>49884-0104-11</NDC11Code>
<ProductNDC>49884-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Entecavir</ProprietaryName>
<NonProprietaryName>Entecavir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140818</StartMarketingDate>
<EndMarketingDate>20170831</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021797</ApplicationNumber>
<LabelerName>Par Pharmaceutical Inc.</LabelerName>
<SubstanceName>ENTECAVIR</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [Chemical/Ingredient],Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-09-01</LastUpdate>
</NDC>
<NDC>
<NDCCode>49884-105-11</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (49884-105-11) > 30 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>49884-0105-11</NDC11Code>
<ProductNDC>49884-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Entecavir</ProprietaryName>
<NonProprietaryName>Entecavir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140818</StartMarketingDate>
<EndMarketingDate>20170831</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021797</ApplicationNumber>
<LabelerName>Par Pharmaceutical Inc.</LabelerName>
<SubstanceName>ENTECAVIR</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [Chemical/Ingredient],Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-09-01</LastUpdate>
</NDC>
<NDC>
<NDCCode>49884-147-11</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (49884-147-11) </PackageDescription>
<NDC11Code>49884-0147-11</NDC11Code>
<ProductNDC>49884-147</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexlansoprazole</ProprietaryName>
<NonProprietaryName>Dexlansoprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230610</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202294</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>DEXLANSOPRAZOLE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexlansoprazole is a proton pump inhibitor (PPI) indicated in patients 12 years of age and older for: 1 Healing of all grades of erosive esophagitis (EE). (1.1) , 2 Maintenance of healed EE and relief of heartburn. (1.2) , 3 Treatment of symptomatic non-erosive gastroesophageal reflux disease (GERD). (1.3) .</IndicationAndUsage>
<Description>The active ingredient in dexlansoprazole delayed-release capsules, a proton pump inhibitor, is (+)-2-[(R)-{[3-methyl-4-(2,2,2-trifluoroethoxy)pyridin-2-yl] methyl} sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Dexlansoprazole is the R-enantiomer of lansoprazole (a racemic mixture of the R- and S-enantiomers). Its molecular formula is: C16H14F3N3O2S, with a molecular weight of 369.36. Dexlansoprazole has the following chemical structure. Dexlansoprazole is a white to off white crystalline powder which melts with decomposition at 143° to 144°C. Dexlansoprazole is practically insoluble in water, freely soluble in dimethylformamide, soluble in methanol, slightly soluble in ethyl acetate and acetonitrile, practically insoluble in hexane. Dexlansoprazole is stable when exposed to light. Dexlansoprazole is more stable in neutral and alkaline conditions than acidic conditions. Dexlansoprazole is supplied for oral administration as a dual delayed-release formulation in capsules. The capsules contain dexlansoprazole in a mixture of two types of enteric-coated granules with different pH-dependent dissolution profiles [see Clinical Pharmacology (12.3)]. Dexlansoprazole delayed-release capsules are available in two dosage strengths: 30 and 60 mg, per capsule. Each capsule contains enteric-coated granules consisting of dexlansoprazole (active ingredient) and the following inactive ingredients: calcium hydroxide, colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer, methacrylic acid copolymer type B, polyethylene glycol, polysorbate 80, sodium lauryl sulfate, sugar spheres, talc and triethyl citrate. The black imprinting ink contains: ammonium hydroxide, iron oxide black, isopropyl alcohol, N-butyl alcohol, propylene glycol and shellac glaze in ethanol. The capsule shells contain hypromellose and titanium dioxide. In addition, 60 mg contain FD&C Blue #1, FD&C Yellow #5*, and FD&C Yellow #6. *60 mg capsule contains FD&C Yellow No. 5 (tartrazine) [see Warnings and Precautions (5)].</Description>
</NDC>
<NDC>
<NDCCode>49884-148-11</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (49884-148-11) </PackageDescription>
<NDC11Code>49884-0148-11</NDC11Code>
<ProductNDC>49884-148</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexlansoprazole</ProprietaryName>
<NonProprietaryName>Dexlansoprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221122</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202294</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>DEXLANSOPRAZOLE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dexlansoprazole is a proton pump inhibitor (PPI) indicated in patients 12 years of age and older for: 1 Healing of all grades of erosive esophagitis (EE). (1.1) , 2 Maintenance of healed EE and relief of heartburn. (1.2) , 3 Treatment of symptomatic non-erosive gastroesophageal reflux disease (GERD). (1.3) .</IndicationAndUsage>
<Description>The active ingredient in dexlansoprazole delayed-release capsules, a proton pump inhibitor, is (+)-2-[(R)-{[3-methyl-4-(2,2,2-trifluoroethoxy)pyridin-2-yl] methyl} sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Dexlansoprazole is the R-enantiomer of lansoprazole (a racemic mixture of the R- and S-enantiomers). Its molecular formula is: C16H14F3N3O2S, with a molecular weight of 369.36. Dexlansoprazole has the following chemical structure. Dexlansoprazole is a white to off white crystalline powder which melts with decomposition at 143° to 144°C. Dexlansoprazole is practically insoluble in water, freely soluble in dimethylformamide, soluble in methanol, slightly soluble in ethyl acetate and acetonitrile, practically insoluble in hexane. Dexlansoprazole is stable when exposed to light. Dexlansoprazole is more stable in neutral and alkaline conditions than acidic conditions. Dexlansoprazole is supplied for oral administration as a dual delayed-release formulation in capsules. The capsules contain dexlansoprazole in a mixture of two types of enteric-coated granules with different pH-dependent dissolution profiles [see Clinical Pharmacology (12.3)]. Dexlansoprazole delayed-release capsules are available in two dosage strengths: 30 and 60 mg, per capsule. Each capsule contains enteric-coated granules consisting of dexlansoprazole (active ingredient) and the following inactive ingredients: calcium hydroxide, colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid and ethyl acrylate copolymer, methacrylic acid copolymer type B, polyethylene glycol, polysorbate 80, sodium lauryl sulfate, sugar spheres, talc and triethyl citrate. The black imprinting ink contains: ammonium hydroxide, iron oxide black, isopropyl alcohol, N-butyl alcohol, propylene glycol and shellac glaze in ethanol. The capsule shells contain hypromellose and titanium dioxide. In addition, 60 mg contain FD&C Blue #1, FD&C Yellow #5*, and FD&C Yellow #6. *60 mg capsule contains FD&C Yellow No. 5 (tartrazine) [see Warnings and Precautions (5)].</Description>
</NDC>
<NDC>
<NDCCode>49884-161-11</NDCCode>
<PackageDescription>3.7 mL in 1 BOTTLE, GLASS (49884-161-11) </PackageDescription>
<NDC11Code>49884-0161-11</NDC11Code>
<ProductNDC>49884-161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcitonin Salmon</ProprietaryName>
<NonProprietaryName>Calcitonin Salmon</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20090608</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076979</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>CALCITONIN SALMON</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[iU]/.09mL</StrengthUnit>
<Pharm_Classes>Calcitonin [CS], Calcitonin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090608</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcitonin Salmon Nasal Solution is a calcitonin, indicated for the treatment of postmenopausal osteoporosis in women greater than 5 years postmenopause when alternative treatments are not suitable. Fracture reduction efficacy has not been demonstrated. (1.1). Limitations of Use: 1 Due to the possible association between malignancy and calcitonin-salmon use, the need for continued therapy should be re-evaluated on a periodic basis. (1.2, 5.4), 2 Calcitonin Salmon Nasal Solution has not been shown to increase bone mineral density in early postmenopausal women (1.2).</IndicationAndUsage>
<Description>Calcitonin is a polypeptide hormone secreted by the parafollicular cells of the thyroid gland in mammals and by the ultimobranchial gland of birds and fish. Calcitonin Salmon Nasal Solution is a synthetic polypeptide of 32 amino acids in the same linear sequence that is found in calcitonin of salmon origin. This is shown by the following graphic formula. It is provided in a 3.7 mL fill glass bottle as a solution for nasal administration. This is sufficient medication for 30 doses. Active Ingredient: calcitonin-salmon, 2200 International Units per mL (corresponding to 200 International Units per 0.09 mL actuation). Inactive Ingredients: sodium chloride, chlorobutanol (possesses a characteristic odor), hydrochloric acid (added as necessary to adjust pH), purified water and nitrogen. The activity of Calcitonin Salmon Nasal Solution is stated in International Units based on bioassay in comparison with the International Reference Preparation of calcitonin-salmon for Bioassay, distributed by the National Institute of Biological Standards and Control, Holly Hill, London.</Description>
</NDC>
<NDC>
<NDCCode>49884-171-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (49884-171-11) </PackageDescription>
<NDC11Code>49884-0171-11</NDC11Code>
<ProductNDC>49884-171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colchicine</ProprietaryName>
<NonProprietaryName>Colchicine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220927</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203976</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>COLCHICINE</SubstanceName>
<StrengthNumber>.6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkaloid [EPC], Alkaloids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220927</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Colchicine tablets, USP are an alkaloid indicated for: 1 Prophylaxis and treatment of gout flares in adults (1.1)., 2 Familial Mediterranean fever (FMF) in adults and children 4 years or older (1.2).</IndicationAndUsage>
<Description>Colchicine, USP is an alkaloid chemically described as (S)N- (5,6,7,9-tetrahydro-1,2,3,10-tetramethoxy-9-oxobenzo [alpha] heptalen-7-yl) acetamide with a molecular formula of C22H25NO6 and a molecular weight of 399.4. The structural formula of colchicine is given below. Colchicine, USP occurs as a pale yellow powder that is soluble in water. Colchicine Tablets, USP are supplied for oral administration as purple, film coated, modified capsule-shaped tablets (0.1575” × 0.3030”), debossed with “p171” on one side and bisect on the other, containing 0.6 mg of the active ingredient colchicine USP. Inactive ingredients: FD&C blue #2, FD&C red #40, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch (botanical source: corn starch), sodium starch glycolate, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>49884-172-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (49884-172-11) </PackageDescription>
<NDC11Code>49884-0172-11</NDC11Code>
<ProductNDC>49884-172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine, Valsartan, Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate Valsartan Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150601</StartMarketingDate>
<EndMarketingDate>20220531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201087</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>5; 12.5; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150601</StartMarketingDatePackage>
<EndMarketingDatePackage>20220531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49884-173-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (49884-173-11) </PackageDescription>
<NDC11Code>49884-0173-11</NDC11Code>
<ProductNDC>49884-173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine, Valsartan, Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate Valsartan Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150601</StartMarketingDate>
<EndMarketingDate>20220531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201087</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>5; 25; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150601</StartMarketingDatePackage>
<EndMarketingDatePackage>20220531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49884-174-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (49884-174-11) </PackageDescription>
<NDC11Code>49884-0174-11</NDC11Code>
<ProductNDC>49884-174</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine, Valsartan, Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate Valsartan Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150601</StartMarketingDate>
<EndMarketingDate>20220531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201087</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>10; 12.5; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150601</StartMarketingDatePackage>
<EndMarketingDatePackage>20220531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49884-175-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (49884-175-11) </PackageDescription>
<NDC11Code>49884-0175-11</NDC11Code>
<ProductNDC>49884-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine, Valsartan, Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate Valsartan Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150601</StartMarketingDate>
<EndMarketingDate>20220531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201087</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>10; 25; 320</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150601</StartMarketingDatePackage>
<EndMarketingDatePackage>20220531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49884-185-11</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (49884-185-11) </PackageDescription>
<NDC11Code>49884-0185-11</NDC11Code>
<ProductNDC>49884-185</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine, Valsartan, Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate Valsartan Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150601</StartMarketingDate>
<EndMarketingDate>20220531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201087</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>10; 25; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150601</StartMarketingDatePackage>
<EndMarketingDatePackage>20220531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49884-228-11</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (49884-228-11) </PackageDescription>
<NDC11Code>49884-0228-11</NDC11Code>
<ProductNDC>49884-228</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ezetimibe</ProprietaryName>
<NonProprietaryName>Ezetimibe</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161212</StartMarketingDate>
<EndMarketingDate>20200331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078560</ApplicationNumber>
<LabelerName>Par Pharmaceutical Inc</LabelerName>
<SubstanceName>EZETIMIBE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Cholesterol Absorption [PE],Dietary Cholesterol Absorption Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-04-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20161212</StartMarketingDatePackage>
<EndMarketingDatePackage>20200331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49884-232-11</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (49884-232-11) </PackageDescription>
<NDC11Code>49884-0232-11</NDC11Code>
<ProductNDC>49884-232</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130915</StartMarketingDate>
<EndMarketingDate>20200731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202542</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>23</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20130915</StartMarketingDatePackage>
<EndMarketingDatePackage>20200731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49884-236-11</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (49884-236-11) </PackageDescription>
<NDC11Code>49884-0236-11</NDC11Code>
<ProductNDC>49884-236</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20001215</StartMarketingDate>
<EndMarketingDate>20200630</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065070</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20001215</StartMarketingDatePackage>
<EndMarketingDatePackage>20200630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49884-239-11</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (49884-239-11) </PackageDescription>
<NDC11Code>49884-0239-11</NDC11Code>
<ProductNDC>49884-239</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Itraconazole</ProprietaryName>
<NonProprietaryName>Itraconazole</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160701</StartMarketingDate>
<EndMarketingDate>20250731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205724</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>ITRACONAZOLE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160701</StartMarketingDatePackage>
<EndMarketingDatePackage>20250731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Itraconazole capsules are indicated for the treatment of the following fungal infections in immunocompromised and non-immunocompromised patients. 1. Blastomycosis, pulmonary and extrapulmonary. 2. Histoplasmosis, including chronic cavitary pulmonary disease and disseminated, non-meningeal histoplasmosis, and. 3. Aspergillosis, pulmonary and extrapulmonary, in patients who are intolerant of or who are refractory to amphotericin B therapy. Specimens for fungal cultures and other relevant laboratory studies (wet mount, histopathology, serology) should be obtained before therapy to isolate and identify causative organisms. Therapy may be instituted before the results of the cultures and other laboratory studies are known; however, once these results become available, antiinfective therapy should be adjusted accordingly. Itraconazole capsules are also indicated for the treatment of the following fungal infections in non-immunocompromised patients. 1. Onychomycosis of the toenail, with or without fingernail involvement, due to dermatophytes (tinea unguium), and. 2. Onychomycosis of the fingernail due to dermatophytes (tinea unguium). Prior to initiating treatment, appropriate nail specimens for laboratory testing (KOH preparation, fungal culture, or nail biopsy) should be obtained to confirm the diagnosis of onychomycosis. (See CLINICAL PHARMACOLOGY: Special Populations, CONTRAINDICATIONS, WARNINGS, and ADVERSE REACTIONS: Post-marketing Experience for more information.).</IndicationAndUsage>
<Description>Itraconazole is an azole antifungal agent. Itraconazole is a 1:1:1:1 racemic mixture of four diastereomers (two enantiomeric pairs), each possessing three chiral centers. It may be represented by the following structural formula and nomenclature. (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2R*,4S*)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1 ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one mixture with (±)-1-[(R*)-sec-butyl]-4-[p-[4-[p-[[(2S*,4R*)-2-(2,4-dichlorophenyl)-2-(1H1,2,4-triazol-1-ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4triazolin-5-one. or. (±)-1-[(RS)-sec-butyl]-4-[p-[4-[p-[[(2R,4S)-2-(2,4-dichlorophenyl)-2-(1H-1,2,4-triazol-1ylmethyl)-1,3-dioxolan-4-yl]methoxy]phenyl]-1-piperazinyl]phenyl]-Δ2-1,2,4-triazolin-5-one. Itraconazole has a molecular formula of C35H38Cl2N8O4 and a molecular weight of 705.64. It is a white to almost white powder. It is insoluble in water, very slightly soluble in alcohols, and freely soluble in dichloromethane. It has a pKa of 3.70 (based on extrapolation of values obtained from methanolic solutions) and a log (n-octanol/water) partition coefficient of 5.66 at pH 8.1. Itraconazole capsules contain 100 mg of itraconazole coated on sugar spheres. Inactive ingredients are gelatin capsule, hypromellose, Polyethylene Glycol and Sugar spheres (composed of sucrose, corn starch, and purified water). Gelatin capsules include gelatin and titanium dioxide. Black ink contains Propylene Glycol and Iron Oxide Black.</Description>
</NDC>
<NDC>
<NDCCode>49884-250-11</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (49884-250-11) </PackageDescription>
<NDC11Code>49884-0250-11</NDC11Code>
<ProductNDC>49884-250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine And Fluoxetine</ProprietaryName>
<NonProprietaryName>Olanzapine And Fuoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077742</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>OLANZAPINE; FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>6; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine and fluoxetine capsules are indicated for the treatment of: 1 Acute depressive episodes in Bipolar I Disorder [see Clinical Studies (14.1)]. , 2 Treatment resistant depression (Major Depressive Disorder in patient who do not respond to 2 separate trials of different antidepressants of adequate dose and duration in the current episode) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Olanzapine and Fluoxetine Capsules, USP combines an atypical antipsychotic and a selective serotonin reuptake inhibitor, olanzapine (the active ingredient in Zyprexa, and Zyprexa Zydis) and fluoxetine hydrochloride (the active ingredient in Prozac and Sarafem). Olanzapine belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H- thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. Fluoxetine hydrochloride is a selective serotonin reuptake inhibitor (SSRI). The chemical designation is (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride. The molecular formula is C17H18F3NOHCl, which corresponds to a molecular weight of 345.79. The chemical structures are:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Olanzapine and Fluoxetine Capsules, USP are available for oral administration in the following strength combinations. Each capsule consists of gelatin, magnesium stearate, partially pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 3 mg/25 mg capsule also contains red iron oxide; the 6 mg/50 mg capsule also contains FD&C blue No. 2, FD&C red No. 3, and FD&C yellow No. 6; the 12 mg/25 mg capsule also contains D&C red No. 28, FD&C blue No. 1, FD&C red No. 40, and red iron oxide; and the 12 mg/50 mg capsule also contains D&C red No. 28, FD&C blue No. 1 FD&C blue No. 2, FD&C red No. 3, FD&C red No. 40, and FD&C yellow No. 6. The capsules also have printing in edible black ink which contains the following ingredients: D&C yellow No. 10, ethanol, FD&C blue No. 1, FD&C blue No. 2, FD&C red No. 40, iron oxide black, methanol, n-Butyl alcohol, propylene glycol, and shellac glaze in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>49884-251-11</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (49884-251-11) </PackageDescription>
<NDC11Code>49884-0251-11</NDC11Code>
<ProductNDC>49884-251</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine And Fluoxetine</ProprietaryName>
<NonProprietaryName>Olanzapine And Fuoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077742</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>OLANZAPINE; FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>6; 50</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine and fluoxetine capsules are indicated for the treatment of: 1 Acute depressive episodes in Bipolar I Disorder [see Clinical Studies (14.1)]. , 2 Treatment resistant depression (Major Depressive Disorder in patient who do not respond to 2 separate trials of different antidepressants of adequate dose and duration in the current episode) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Olanzapine and Fluoxetine Capsules, USP combines an atypical antipsychotic and a selective serotonin reuptake inhibitor, olanzapine (the active ingredient in Zyprexa, and Zyprexa Zydis) and fluoxetine hydrochloride (the active ingredient in Prozac and Sarafem). Olanzapine belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H- thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. Fluoxetine hydrochloride is a selective serotonin reuptake inhibitor (SSRI). The chemical designation is (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride. The molecular formula is C17H18F3NOHCl, which corresponds to a molecular weight of 345.79. The chemical structures are:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Olanzapine and Fluoxetine Capsules, USP are available for oral administration in the following strength combinations. Each capsule consists of gelatin, magnesium stearate, partially pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 3 mg/25 mg capsule also contains red iron oxide; the 6 mg/50 mg capsule also contains FD&C blue No. 2, FD&C red No. 3, and FD&C yellow No. 6; the 12 mg/25 mg capsule also contains D&C red No. 28, FD&C blue No. 1, FD&C red No. 40, and red iron oxide; and the 12 mg/50 mg capsule also contains D&C red No. 28, FD&C blue No. 1 FD&C blue No. 2, FD&C red No. 3, FD&C red No. 40, and FD&C yellow No. 6. The capsules also have printing in edible black ink which contains the following ingredients: D&C yellow No. 10, ethanol, FD&C blue No. 1, FD&C blue No. 2, FD&C red No. 40, iron oxide black, methanol, n-Butyl alcohol, propylene glycol, and shellac glaze in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>49884-252-11</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (49884-252-11) </PackageDescription>
<NDC11Code>49884-0252-11</NDC11Code>
<ProductNDC>49884-252</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine And Fluoxetine</ProprietaryName>
<NonProprietaryName>Olanzapine And Fuoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077742</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>OLANZAPINE; FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>12; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine and fluoxetine capsules are indicated for the treatment of: 1 Acute depressive episodes in Bipolar I Disorder [see Clinical Studies (14.1)]. , 2 Treatment resistant depression (Major Depressive Disorder in patient who do not respond to 2 separate trials of different antidepressants of adequate dose and duration in the current episode) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Olanzapine and Fluoxetine Capsules, USP combines an atypical antipsychotic and a selective serotonin reuptake inhibitor, olanzapine (the active ingredient in Zyprexa, and Zyprexa Zydis) and fluoxetine hydrochloride (the active ingredient in Prozac and Sarafem). Olanzapine belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H- thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. Fluoxetine hydrochloride is a selective serotonin reuptake inhibitor (SSRI). The chemical designation is (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride. The molecular formula is C17H18F3NOHCl, which corresponds to a molecular weight of 345.79. The chemical structures are:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Olanzapine and Fluoxetine Capsules, USP are available for oral administration in the following strength combinations. Each capsule consists of gelatin, magnesium stearate, partially pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 3 mg/25 mg capsule also contains red iron oxide; the 6 mg/50 mg capsule also contains FD&C blue No. 2, FD&C red No. 3, and FD&C yellow No. 6; the 12 mg/25 mg capsule also contains D&C red No. 28, FD&C blue No. 1, FD&C red No. 40, and red iron oxide; and the 12 mg/50 mg capsule also contains D&C red No. 28, FD&C blue No. 1 FD&C blue No. 2, FD&C red No. 3, FD&C red No. 40, and FD&C yellow No. 6. The capsules also have printing in edible black ink which contains the following ingredients: D&C yellow No. 10, ethanol, FD&C blue No. 1, FD&C blue No. 2, FD&C red No. 40, iron oxide black, methanol, n-Butyl alcohol, propylene glycol, and shellac glaze in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>49884-253-11</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (49884-253-11) </PackageDescription>
<NDC11Code>49884-0253-11</NDC11Code>
<ProductNDC>49884-253</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine And Fluoxetine</ProprietaryName>
<NonProprietaryName>Olanzapine And Fuoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077742</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>OLANZAPINE; FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>12; 50</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine and fluoxetine capsules are indicated for the treatment of: 1 Acute depressive episodes in Bipolar I Disorder [see Clinical Studies (14.1)]. , 2 Treatment resistant depression (Major Depressive Disorder in patient who do not respond to 2 separate trials of different antidepressants of adequate dose and duration in the current episode) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Olanzapine and Fluoxetine Capsules, USP combines an atypical antipsychotic and a selective serotonin reuptake inhibitor, olanzapine (the active ingredient in Zyprexa, and Zyprexa Zydis) and fluoxetine hydrochloride (the active ingredient in Prozac and Sarafem). Olanzapine belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H- thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. Fluoxetine hydrochloride is a selective serotonin reuptake inhibitor (SSRI). The chemical designation is (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride. The molecular formula is C17H18F3NOHCl, which corresponds to a molecular weight of 345.79. The chemical structures are:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Olanzapine and Fluoxetine Capsules, USP are available for oral administration in the following strength combinations. Each capsule consists of gelatin, magnesium stearate, partially pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 3 mg/25 mg capsule also contains red iron oxide; the 6 mg/50 mg capsule also contains FD&C blue No. 2, FD&C red No. 3, and FD&C yellow No. 6; the 12 mg/25 mg capsule also contains D&C red No. 28, FD&C blue No. 1, FD&C red No. 40, and red iron oxide; and the 12 mg/50 mg capsule also contains D&C red No. 28, FD&C blue No. 1 FD&C blue No. 2, FD&C red No. 3, FD&C red No. 40, and FD&C yellow No. 6. The capsules also have printing in edible black ink which contains the following ingredients: D&C yellow No. 10, ethanol, FD&C blue No. 1, FD&C blue No. 2, FD&C red No. 40, iron oxide black, methanol, n-Butyl alcohol, propylene glycol, and shellac glaze in alcohol.</Description>
</NDC>
<NDC>
<NDCCode>49884-263-11</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (49884-263-11) </PackageDescription>
<NDC11Code>49884-0263-11</NDC11Code>
<ProductNDC>49884-263</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160719</StartMarketingDate>
<EndMarketingDate>20200630</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079168</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160719</StartMarketingDatePackage>
<EndMarketingDatePackage>20200630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49884-268-11</NDCCode>
<PackageDescription>30 PACKET in 1 CARTON (49884-268-11) / 1 POWDER, FOR SUSPENSION in 1 PACKET (49884-268-52) </PackageDescription>
<NDC11Code>49884-0268-11</NDC11Code>
<ProductNDC>49884-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole/sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Omeprazole And Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160718</StartMarketingDate>
<EndMarketingDate>20231231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079182</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE; SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>20; 1680</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Alkalinizing Activity [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160718</StartMarketingDatePackage>
<EndMarketingDatePackage>20231231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole and sodium bicarbonate for oral suspension is indicated in adults for the: 1 short-term treatment of active duodenal ulcer. Most patients heal within four weeks. Some patients may require an additional four weeks of therapy. .</IndicationAndUsage>
<Description>Omeprazole and sodium bicarbonate for oral suspension is a combination of omeprazole, a proton-pump inhibitor, and sodium bicarbonate, an antacid. Omeprazole is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole, a racemic mixture of two enantiomers that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder which melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole and sodium bicarbonate is supplied as unit dose packets for oral suspension. Packets of powder for oral suspension contain either 40 mg or 20 mg of omeprazole and 1680 mg of sodium bicarbonate with the following excipients: xylitol, xanthan gum, sucralose powder, peach powder, sucrose and peppermint flavor. Omeprazole and sodium bicarbonate for oral suspension is immediate-release formulations that contain sodium bicarbonate which raises the gastric pH and thus protects omeprazole from acid degradation.</Description>
</NDC>
<NDC>
<NDCCode>49884-269-11</NDCCode>
<PackageDescription>30 PACKET in 1 CARTON (49884-269-11) / 1 POWDER, FOR SUSPENSION in 1 PACKET (49884-269-52) </PackageDescription>
<NDC11Code>49884-0269-11</NDC11Code>
<ProductNDC>49884-269</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole/sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Omeprazole And Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160718</StartMarketingDate>
<EndMarketingDate>20241130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079182</ApplicationNumber>
<LabelerName>Par Pharmaceutical, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE; SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>40; 1680</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Alkalinizing Activity [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160718</StartMarketingDatePackage>
<EndMarketingDatePackage>20241130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole and sodium bicarbonate for oral suspension is indicated in adults for the: 1 short-term treatment of active duodenal ulcer. Most patients heal within four weeks. Some patients may require an additional four weeks of therapy. .</IndicationAndUsage>
<Description>Omeprazole and sodium bicarbonate for oral suspension is a combination of omeprazole, a proton-pump inhibitor, and sodium bicarbonate, an antacid. Omeprazole is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole, a racemic mixture of two enantiomers that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder which melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole and sodium bicarbonate is supplied as unit dose packets for oral suspension. Packets of powder for oral suspension contain either 40 mg or 20 mg of omeprazole and 1680 mg of sodium bicarbonate with the following excipients: xylitol, xanthan gum, sucralose powder, peach powder, sucrose and peppermint flavor. Omeprazole and sodium bicarbonate for oral suspension is immediate-release formulations that contain sodium bicarbonate which raises the gastric pH and thus protects omeprazole from acid degradation.</Description>
</NDC>
<NDC>
<NDCCode>49884-277-11</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (49884-277-11) </PackageDescription>
<NDC11Code>49884-0277-11</NDC11Code>
<ProductNDC>49884-277</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine And Fluoxetine</ProprietaryName>
<NonProprietaryName>Olanzapine And Fuoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121126</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077742</ApplicationNumber>
<LabelerName>Par Health USA, LLC</LabelerName>
<SubstanceName>OLANZAPINE; FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>3; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine and fluoxetine capsules are indicated for the treatment of: 1 Acute depressive episodes in Bipolar I Disorder [see Clinical Studies (14.1)]. , 2 Treatment resistant depression (Major Depressive Disorder in patient who do not respond to 2 separate trials of different antidepressants of adequate dose and duration in the current episode) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Olanzapine and Fluoxetine Capsules, USP combines an atypical antipsychotic and a selective serotonin reuptake inhibitor, olanzapine (the active ingredient in Zyprexa, and Zyprexa Zydis) and fluoxetine hydrochloride (the active ingredient in Prozac and Sarafem). Olanzapine belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H- thieno[2,3-b] [1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. Fluoxetine hydrochloride is a selective serotonin reuptake inhibitor (SSRI). The chemical designation is (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride. The molecular formula is C17H18F3NOHCl, which corresponds to a molecular weight of 345.79. The chemical structures are:. Olanzapine is a yellow crystalline solid, which is practically insoluble in water. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Olanzapine and Fluoxetine Capsules, USP are available for oral administration in the following strength combinations. Each capsule consists of gelatin, magnesium stearate, partially pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 3 mg/25 mg capsule also contains red iron oxide; the 6 mg/50 mg capsule also contains FD&C blue No. 2, FD&C red No. 3, and FD&C yellow No. 6; the 12 mg/25 mg capsule also contains D&C red No. 28, FD&C blue No. 1, FD&C red No. 40, and red iron oxide; and the 12 mg/50 mg capsule also contains D&C red No. 28, FD&C blue No. 1 FD&C blue No. 2, FD&C red No. 3, FD&C red No. 40, and FD&C yellow No. 6. The capsules also have printing in edible black ink which contains the following ingredients: D&C yellow No. 10, ethanol, FD&C blue No. 1, FD&C blue No. 2, FD&C red No. 40, iron oxide black, methanol, n-Butyl alcohol, propylene glycol, and shellac glaze in alcohol.</Description>
</NDC>
</NDCList>