RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>50090-0482-0</NDCCode>
    <PackageDescription>21 TABLET in 1 BOTTLE (50090-0482-0) </PackageDescription>
    <NDC11Code>50090-0482-00</NDC11Code>
    <ProductNDC>50090-0482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naproxen</ProprietaryName>
    <NonProprietaryName>Naproxen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20070701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078250</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>NAPROXEN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141128</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Naproxen tablets and naproxen sodium tablets are indicated for. the relief of the signs and symptoms of: 1 rheumatoid arthritis, 2 osteoarthritis, 3 ankylosing spondylitis, 4 Polyarticular Juvenile Idiopathic Arthritis .</IndicationAndUsage>
    <Description>Naproxen Tablets, USP and Naproxen Sodium Tablets, USP are nonsteroidal anti-inflammatory drugs available as follows:. Naproxen Tablets, USP are available as follows for oral administration. 250 mg: circular, light orange colored, flat, uncoated tablets, engraved with ‘G’ and ‘32’ on either side of a break line on one side and ‘250’ on the other side. 375 mg: oval, light orange colored, biconvex, uncoated tablets, engraved with ‘G32’ on one side and ‘375’ on the other side. 500 mg: capsule shaped, light orange colored, uncoated tablets, debossed with ‘G’ and ‘32’ on either side of a break line on one side and ‘500’ on the other side. The inactive ingredients are croscarmellose sodium, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose and povidone. Naproxen Sodium Tablets, USP are available as follows for oral administration. 275 mg: blue, oval, film-coated tablets with ‘G 0’ engraved on one side and ‘275’ engraved on the other side. 550 mg: blue colored, modified capsule shaped, biconvex, film-coated tablets, engraved with ‘G’ and ‘0’ on either side of a break line and a break line on the other side. The inactive ingredients are colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone and talc. The coating suspension for the naproxen sodium 275 mg and 550 mg tablet contains FD&amp;C blue#2, iron oxide red, hypromellose, polyethylene glycol and titanium dioxide. Naproxen, USP is a propionic acid derivative related to the arylacetic acid group of nonsteroidal anti-inflammatory drugs. The chemical names for naproxen, USP and naproxen sodium, USP are (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid and (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid, sodium salt, respectively. Naproxen, USP has a molecular weight of 230.26 g/mol and a molecular formula of C14H14O3. Naproxen sodium, USP has a molecular weight of 252.24 g/mol and a molecular formula of C14H13NaO3. Naproxen, USP and naproxen sodium, USP have the following structures, respectively. Naproxen, USP is a white to off-white crystalline powder. It is soluble in chloroform, dehydrated alcohol and alcohol; sparingly soluble in ether, insoluble in water. Naproxen sodium, USP is a white to almost white crystalline powder, soluble in water and methanol; sparingly soluble in ethanol.</Description>
  </NDC>
  <NDC>
    <NDCCode>50923-0482-0</NDCCode>
    <PackageDescription>20 kg in 1 DRUM (50923-0482-0)</PackageDescription>
    <NDC11Code>50923-0482-00</NDC11Code>
    <ProductNDC>50923-0482</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Galantamine Hydrobromide</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20100419</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>n.v. Ajinomoto Omnichem S.A.</LabelerName>
    <SubstanceName>GALANTAMINE HYDROBROMIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>70518-0482-0</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (70518-0482-0) </PackageDescription>
    <NDC11Code>70518-0482-00</NDC11Code>
    <ProductNDC>70518-0482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sustiva</ProprietaryName>
    <NonProprietaryName>Efavirenz</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170505</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021360</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>EFAVIRENZ</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Non-Nucleoside Analog [EXT],Non-Nucleoside Reverse Transcriptase Inhibitors [MoA],Cytochrome P450 3A Inducers [MoA],Cytochrome P450 2B6 Inducers [MoA],Cytochrome P450 2C9 Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-04-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170505</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>50090-0482-1</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (50090-0482-1) </PackageDescription>
    <NDC11Code>50090-0482-01</NDC11Code>
    <ProductNDC>50090-0482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naproxen</ProprietaryName>
    <NonProprietaryName>Naproxen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20070701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078250</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>NAPROXEN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Naproxen tablets and naproxen sodium tablets are indicated for. the relief of the signs and symptoms of: 1 rheumatoid arthritis, 2 osteoarthritis, 3 ankylosing spondylitis, 4 Polyarticular Juvenile Idiopathic Arthritis .</IndicationAndUsage>
    <Description>Naproxen Tablets, USP and Naproxen Sodium Tablets, USP are nonsteroidal anti-inflammatory drugs available as follows:. Naproxen Tablets, USP are available as follows for oral administration. 250 mg: circular, light orange colored, flat, uncoated tablets, engraved with ‘G’ and ‘32’ on either side of a break line on one side and ‘250’ on the other side. 375 mg: oval, light orange colored, biconvex, uncoated tablets, engraved with ‘G32’ on one side and ‘375’ on the other side. 500 mg: capsule shaped, light orange colored, uncoated tablets, debossed with ‘G’ and ‘32’ on either side of a break line on one side and ‘500’ on the other side. The inactive ingredients are croscarmellose sodium, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose and povidone. Naproxen Sodium Tablets, USP are available as follows for oral administration. 275 mg: blue, oval, film-coated tablets with ‘G 0’ engraved on one side and ‘275’ engraved on the other side. 550 mg: blue colored, modified capsule shaped, biconvex, film-coated tablets, engraved with ‘G’ and ‘0’ on either side of a break line and a break line on the other side. The inactive ingredients are colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone and talc. The coating suspension for the naproxen sodium 275 mg and 550 mg tablet contains FD&amp;C blue#2, iron oxide red, hypromellose, polyethylene glycol and titanium dioxide. Naproxen, USP is a propionic acid derivative related to the arylacetic acid group of nonsteroidal anti-inflammatory drugs. The chemical names for naproxen, USP and naproxen sodium, USP are (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid and (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid, sodium salt, respectively. Naproxen, USP has a molecular weight of 230.26 g/mol and a molecular formula of C14H14O3. Naproxen sodium, USP has a molecular weight of 252.24 g/mol and a molecular formula of C14H13NaO3. Naproxen, USP and naproxen sodium, USP have the following structures, respectively. Naproxen, USP is a white to off-white crystalline powder. It is soluble in chloroform, dehydrated alcohol and alcohol; sparingly soluble in ether, insoluble in water. Naproxen sodium, USP is a white to almost white crystalline powder, soluble in water and methanol; sparingly soluble in ethanol.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-0482-2</NDCCode>
    <PackageDescription>180 TABLET in 1 BOTTLE (50090-0482-2) </PackageDescription>
    <NDC11Code>50090-0482-02</NDC11Code>
    <ProductNDC>50090-0482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naproxen</ProprietaryName>
    <NonProprietaryName>Naproxen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20070701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078250</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>NAPROXEN</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Naproxen tablets and naproxen sodium tablets are indicated for. the relief of the signs and symptoms of: 1 rheumatoid arthritis, 2 osteoarthritis, 3 ankylosing spondylitis, 4 Polyarticular Juvenile Idiopathic Arthritis .</IndicationAndUsage>
    <Description>Naproxen Tablets, USP and Naproxen Sodium Tablets, USP are nonsteroidal anti-inflammatory drugs available as follows:. Naproxen Tablets, USP are available as follows for oral administration. 250 mg: circular, light orange colored, flat, uncoated tablets, engraved with ‘G’ and ‘32’ on either side of a break line on one side and ‘250’ on the other side. 375 mg: oval, light orange colored, biconvex, uncoated tablets, engraved with ‘G32’ on one side and ‘375’ on the other side. 500 mg: capsule shaped, light orange colored, uncoated tablets, debossed with ‘G’ and ‘32’ on either side of a break line on one side and ‘500’ on the other side. The inactive ingredients are croscarmellose sodium, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose and povidone. Naproxen Sodium Tablets, USP are available as follows for oral administration. 275 mg: blue, oval, film-coated tablets with ‘G 0’ engraved on one side and ‘275’ engraved on the other side. 550 mg: blue colored, modified capsule shaped, biconvex, film-coated tablets, engraved with ‘G’ and ‘0’ on either side of a break line and a break line on the other side. The inactive ingredients are colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, povidone and talc. The coating suspension for the naproxen sodium 275 mg and 550 mg tablet contains FD&amp;C blue#2, iron oxide red, hypromellose, polyethylene glycol and titanium dioxide. Naproxen, USP is a propionic acid derivative related to the arylacetic acid group of nonsteroidal anti-inflammatory drugs. The chemical names for naproxen, USP and naproxen sodium, USP are (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid and (S)-6-methoxy-α-methyl-2-naphthaleneacetic acid, sodium salt, respectively. Naproxen, USP has a molecular weight of 230.26 g/mol and a molecular formula of C14H14O3. Naproxen sodium, USP has a molecular weight of 252.24 g/mol and a molecular formula of C14H13NaO3. Naproxen, USP and naproxen sodium, USP have the following structures, respectively. Naproxen, USP is a white to off-white crystalline powder. It is soluble in chloroform, dehydrated alcohol and alcohol; sparingly soluble in ether, insoluble in water. Naproxen sodium, USP is a white to almost white crystalline powder, soluble in water and methanol; sparingly soluble in ethanol.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-482-30</NDCCode>
    <PackageDescription>30 POUCH in 1 CARTON (31722-482-30)  / 1 FILM, SOLUBLE in 1 POUCH (31722-482-31) </PackageDescription>
    <NDC11Code>31722-0482-30</NDC11Code>
    <ProductNDC>31722-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buprenorphine And Naloxone</ProprietaryName>
    <NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
    <DosageFormName>FILM, SOLUBLE</DosageFormName>
    <RouteName>BUCCAL; SUBLINGUAL</RouteName>
    <StartMarketingDate>20260501</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA219850</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>12; 3</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
    <DEASchedule>CIII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-05-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Buprenorphine and naloxone sublingual film is indicated for treatment of opioid dependence. Buprenorphine and naloxone sublingual film should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
    <Description>Buprenorphine and naloxone sublingual film is a light orange to dark orange film, imprinted with ‘A2’ on 2 mg/0.5 mg strength, ‘A4’ on 4 mg/1 mg strength, ‘A8’ on 8 mg/2 mg strength and ‘A12’ on 12 mg/3 mg strength. It contains buprenorphine HCl, a mu‐opioid receptor partial agonist, and a kappa‐opioid receptor antagonist, and naloxone HCl dihydrate, an opioid antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual or buccal administration and is available in four dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone, 4 mg buprenorphine with 1 mg naloxone, 8 mg buprenorphine with 2 mg naloxone and 12 mg buprenorphine with 3 mg naloxone. Each film also contains maltitol, acesulfame potassium, polyethylene glycol, polyethylene oxide, povidone, hydroxypropyl methylcellulose, edetate disodium,   citric acid monohydrate, sodium citrate, butylated hydroxytoluene, FD&amp;C Yellow No. 6 powder and lemon lime flavor. Chemically, buprenorphine hydrochloride, USP is 6,14-ethenomorphinan-7-methanol, 17- (cyclopropylmethyl)-alpha-(1,1-dimethylethyl)-4,5-epoxy-18,19-dihydro-3-hydroxy-6-methoxy-alpha-methyl-, hydrochloride, (alphaS,5alpha,7alpha). It has the following chemical structure. Buprenorphine hydrochloride, USP has the molecular formula C29H41NO4HCl and the molecular weight is 504.10. It is a white or almost white powder. Buprenorphine hydrochloride, USP is sparingly soluble in water, freely soluble in methanol, soluble in alcohol and practically insoluble in cyclohexane. Chemically, naloxone hydrochloride dehydrate, USP is (5R,9R,13S,14S)-17-Allyl- 3,14-dihydroxy-4,5-epoxymorphinan-6-on hydrochloride Dihydrate. It has the following chemical structure. Naloxone hydrochloride dehydrate, USP has the molecular formula C19H22ClNO42H2O and the molecular weight is 399.87 g/mol. It is a white or almost white powder. Naloxone hydrochloride dehydrate, USP is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0482-1</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0482-1)</PackageDescription>
    <NDC11Code>49288-0482-01</NDC11Code>
    <ProductNDC>49288-0482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sugar Cane</ProprietaryName>
    <NonProprietaryName>Sugar Cane</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>SUGARCANE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0482-2</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0482-2)</PackageDescription>
    <NDC11Code>49288-0482-02</NDC11Code>
    <ProductNDC>49288-0482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sugar Cane</ProprietaryName>
    <NonProprietaryName>Sugar Cane</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>SUGARCANE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0482-3</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0482-3)</PackageDescription>
    <NDC11Code>49288-0482-03</NDC11Code>
    <ProductNDC>49288-0482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sugar Cane</ProprietaryName>
    <NonProprietaryName>Sugar Cane</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>SUGARCANE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0482-4</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0482-4)</PackageDescription>
    <NDC11Code>49288-0482-04</NDC11Code>
    <ProductNDC>49288-0482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sugar Cane</ProprietaryName>
    <NonProprietaryName>Sugar Cane</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>SUGARCANE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0482-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0482-5)</PackageDescription>
    <NDC11Code>49288-0482-05</NDC11Code>
    <ProductNDC>49288-0482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sugar Cane</ProprietaryName>
    <NonProprietaryName>Sugar Cane</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>SUGARCANE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>50419-482-03</NDCCode>
    <PackageDescription>3 BLISTER PACK in 1 CARTON (50419-482-03)  / 28 TABLET, FILM COATED in 1 BLISTER PACK (50419-482-01) </PackageDescription>
    <NDC11Code>50419-0482-03</NDC11Code>
    <ProductNDC>50419-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Angeliq</ProprietaryName>
    <NonProprietaryName>Drospirenone And Estradiol</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120229</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021355</ApplicationNumber>
    <LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ESTRADIOL; DROSPIRENONE</SubstanceName>
    <StrengthNumber>.5; .25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120229</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Use estrogen, alone or in combination with a progestogen, at the lowest effective dose and the shortest duration consistent with treatment goals and risks for the individual woman. Re-evaluate postmenopausal women periodically as clinically appropriate to determine whether treatment is still necessary.</IndicationAndUsage>
    <Description>Angeliq tablets, for oral administration, provide a hormone regimen consisting of drospirenone and estradiol. Drospirenone, (6R,7R,8R,9S,10R,13S,14S,15S,16S,17S)-1,3´,4´,6, 6a,7,8,9,10,11,12,13,14,15,15a,16-hexadecahydro-10,13-dimethylspiro-[17H-dicyclopropa[6,7:15,16]cyclopenta[a]phenanthrene- 17,2´(5H)-furan]-3,5´(2H)-dione (CAS) is a synthetic progestational compound and has a molecular weight of 366.5 and a molecular formula of C24H30O3. Estradiol USP, (Estra-1,3,5(10)-triene-3,17-diol,17ß), has a molecular weight of 272.39 and the molecular formula is C18H24O2. The structural formulas are as follows. The inactive ingredients in Angeliq 0.5 mg DRSP/1 mg E2 tablets are: lactose monohydrate NF, corn starch NF, pregelatinized starch NF, povidone 25000 USP, magnesium stearate NF, hydroxylpropylmethyl cellulose USP, macrogol 6000 NF, talc USP, titanium dioxide USP, and red ferric oxide pigment NF. The inactive ingredients in Angeliq 0.25 mg DRSP/0.5 mg E2 tablets are: lactose monohydrate NF, corn starch NF, pregelatinized starch NF, povidone 25000 USP, magnesium stearate NF, hydroxylpropylmethyl cellulose USP, macrogol 6000 NF, talc USP, titanium dioxide USP, and yellow ferric oxide pigment NF.</Description>
  </NDC>
  <NDC>
    <NDCCode>50419-482-72</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (50419-482-72)  / 14 TABLET, FILM COATED in 1 BLISTER PACK (50419-482-71) </PackageDescription>
    <NDC11Code>50419-0482-72</NDC11Code>
    <ProductNDC>50419-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Angeliq</ProprietaryName>
    <NonProprietaryName>Drospirenone And Estradiol</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120229</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021355</ApplicationNumber>
    <LabelerName>Bayer HealthCare Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>ESTRADIOL; DROSPIRENONE</SubstanceName>
    <StrengthNumber>.5; .25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC], Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120229</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Use estrogen, alone or in combination with a progestogen, at the lowest effective dose and the shortest duration consistent with treatment goals and risks for the individual woman. Re-evaluate postmenopausal women periodically as clinically appropriate to determine whether treatment is still necessary.</IndicationAndUsage>
    <Description>Angeliq tablets, for oral administration, provide a hormone regimen consisting of drospirenone and estradiol. Drospirenone, (6R,7R,8R,9S,10R,13S,14S,15S,16S,17S)-1,3´,4´,6, 6a,7,8,9,10,11,12,13,14,15,15a,16-hexadecahydro-10,13-dimethylspiro-[17H-dicyclopropa[6,7:15,16]cyclopenta[a]phenanthrene- 17,2´(5H)-furan]-3,5´(2H)-dione (CAS) is a synthetic progestational compound and has a molecular weight of 366.5 and a molecular formula of C24H30O3. Estradiol USP, (Estra-1,3,5(10)-triene-3,17-diol,17ß), has a molecular weight of 272.39 and the molecular formula is C18H24O2. The structural formulas are as follows. The inactive ingredients in Angeliq 0.5 mg DRSP/1 mg E2 tablets are: lactose monohydrate NF, corn starch NF, pregelatinized starch NF, povidone 25000 USP, magnesium stearate NF, hydroxylpropylmethyl cellulose USP, macrogol 6000 NF, talc USP, titanium dioxide USP, and red ferric oxide pigment NF. The inactive ingredients in Angeliq 0.25 mg DRSP/0.5 mg E2 tablets are: lactose monohydrate NF, corn starch NF, pregelatinized starch NF, povidone 25000 USP, magnesium stearate NF, hydroxylpropylmethyl cellulose USP, macrogol 6000 NF, talc USP, titanium dioxide USP, and yellow ferric oxide pigment NF.</Description>
  </NDC>
  <NDC>
    <NDCCode>55513-482-01</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (55513-482-01)  / .4 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>55513-0482-01</NDC11Code>
    <ProductNDC>55513-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amjevita</ProprietaryName>
    <NonProprietaryName>Adalimumab-atto</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230814</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761024</ApplicationNumber>
    <LabelerName>Amgen, Inc</LabelerName>
    <SubstanceName>ADALIMUMAB</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/.4mL</StrengthUnit>
    <Pharm_Classes>Antibodies, Monoclonal [CS], Tumor Necrosis Factor Blocker [EPC], Tumor Necrosis Factor Receptor Blocking Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230814</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>AMJEVITA is a tumor necrosis factor (TNF) blocker indicated for: : 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn's disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers., 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in patients 12 years of age and older. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adults and pediatric patients 2 years of age and older. (1.9).</IndicationAndUsage>
    <Description>Adalimumab-atto is a tumor necrosis factor blocker. Adalimumab-atto is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-atto is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. AMJEVITA® (adalimumab-atto) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SureClick autoinjector, or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of AMJEVITA is clear, colorless to slightly yellow, with a pH of about 5.2. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of AMJEVITA is formulated with L-lactic acid (1.7 mg), polysorbate 80 (0.8 mg), sodium hydroxide for pH adjustment, sucrose (67 mg), and Water for Injection, USP, pH 5.2. Each 40 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of AMJEVITA is formulated with glacial acetic acid (0.48 mg), polysorbate 80 (0.8 mg), sodium hydroxide for pH adjustment, sucrose (72 mg), and Water for Injection, USP, pH 5.2. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of AMJEVITA is formulated with L-lactic acid (0.9 mg), polysorbate 80 (0.4 mg), sodium hydroxide for pH adjustment, sucrose (34 mg), and Water for Injection, USP, pH 5.2. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of AMJEVITA is formulated with glacial acetic acid (0.24 mg), polysorbate 80 (0.4 mg), sodium hydroxide for pH adjustment, sucrose (36 mg), and Water for Injection, USP, pH 5.2. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of AMJEVITA is formulated with L-lactic acid (0.4 mg), polysorbate 80 (0.2 mg), sodium hydroxide for pH adjustment, sucrose (17 mg), and Water for Injection, USP, pH 5.2. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of AMJEVITA is formulated with glacial acetic acid (0.12 mg), polysorbate 80 (0.2 mg), sodium hydroxide for pH adjustment, sucrose (18 mg), and Water for Injection, USP, pH 5.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>55513-482-02</NDCCode>
    <PackageDescription>2 SYRINGE in 1 CARTON (55513-482-02)  / .4 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>55513-0482-02</NDC11Code>
    <ProductNDC>55513-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amjevita</ProprietaryName>
    <NonProprietaryName>Adalimumab-atto</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230814</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761024</ApplicationNumber>
    <LabelerName>Amgen, Inc</LabelerName>
    <SubstanceName>ADALIMUMAB</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/.4mL</StrengthUnit>
    <Pharm_Classes>Antibodies, Monoclonal [CS], Tumor Necrosis Factor Blocker [EPC], Tumor Necrosis Factor Receptor Blocking Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230814</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>AMJEVITA is a tumor necrosis factor (TNF) blocker indicated for: : 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn's disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers., 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in patients 12 years of age and older. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adults and pediatric patients 2 years of age and older. (1.9).</IndicationAndUsage>
    <Description>Adalimumab-atto is a tumor necrosis factor blocker. Adalimumab-atto is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-atto is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. AMJEVITA® (adalimumab-atto) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SureClick autoinjector, or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of AMJEVITA is clear, colorless to slightly yellow, with a pH of about 5.2. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of AMJEVITA is formulated with L-lactic acid (1.7 mg), polysorbate 80 (0.8 mg), sodium hydroxide for pH adjustment, sucrose (67 mg), and Water for Injection, USP, pH 5.2. Each 40 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of AMJEVITA is formulated with glacial acetic acid (0.48 mg), polysorbate 80 (0.8 mg), sodium hydroxide for pH adjustment, sucrose (72 mg), and Water for Injection, USP, pH 5.2. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of AMJEVITA is formulated with L-lactic acid (0.9 mg), polysorbate 80 (0.4 mg), sodium hydroxide for pH adjustment, sucrose (34 mg), and Water for Injection, USP, pH 5.2. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of AMJEVITA is formulated with glacial acetic acid (0.24 mg), polysorbate 80 (0.4 mg), sodium hydroxide for pH adjustment, sucrose (36 mg), and Water for Injection, USP, pH 5.2. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of AMJEVITA is formulated with L-lactic acid (0.4 mg), polysorbate 80 (0.2 mg), sodium hydroxide for pH adjustment, sucrose (17 mg), and Water for Injection, USP, pH 5.2. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of AMJEVITA is formulated with glacial acetic acid (0.12 mg), polysorbate 80 (0.2 mg), sodium hydroxide for pH adjustment, sucrose (18 mg), and Water for Injection, USP, pH 5.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-482-31</NDCCode>
    <PackageDescription>100 TABLET, DELAYED RELEASE in 1 BOTTLE (62332-482-31) </PackageDescription>
    <NDC11Code>62332-0482-31</NDC11Code>
    <ProductNDC>62332-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
    <DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220104</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213075</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220104</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxycycline hyclate delayed-release tablets are a tetracycline-class drug indicated for:  Rickettsial infections (1.1)  Sexually transmitted infections (1.2)  Respiratory tract infections (1.3)  Specific bacterial infections (1.4)  Ophthalmic infections (1.5)  Anthrax, including inhalational anthrax (post-exposure) (1.6)  Alternative treatment for selected infections when penicillin is contraindicated (1.7)  Adjunctive therapy in acute intestinal amebiasis and severe acne (1.8)  Prophylaxis of malaria (1.9)               Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.10).</IndicationAndUsage>
    <Description>Doxycycline hyclate delayed-release tablets, USP contain specially coated pellets of doxycycline hyclate, USP, a tetracycline class drug synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration. The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical name for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)] -4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2- carboxamide  monohydrochloride, compound with ethyl alcohol (2:1),  monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet contains doxycycline 75 mg, 100 mg, 150 mg and 200 mg (equivalent to doxycycline hyclate 86.55 mg, 115.41 mg, 173.11 mg and 230.82). Inactive ingredients in the tablet formulation are: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, hypromellose, hypromellose phthalate, lactose anhydrous, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 6000, povidone (K-30), sodium chloride, talc and triethyl citrate. Each doxycycline hyclate delayed-release tablets 75 mg contains 4.7 mg (0.204 mEq) of sodium, each doxycycline hyclate delayed-release tablets 100 mg contains 6.3 mg (0.274 mEq) of sodium, each doxycycline hyclate delayed-release tablets 150 mg contains 9.4 mg (0.409 mEq) of sodium and each doxycycline hyclate delayed-release tablets 200 mg contains 12.6 mg (0.548 mEq) of sodium.  This drug product meets USP Dissolution Test 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-482-60</NDCCode>
    <PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (62332-482-60) </PackageDescription>
    <NDC11Code>62332-0482-60</NDC11Code>
    <ProductNDC>62332-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
    <DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220104</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213075</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220104</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxycycline hyclate delayed-release tablets are a tetracycline-class drug indicated for:  Rickettsial infections (1.1)  Sexually transmitted infections (1.2)  Respiratory tract infections (1.3)  Specific bacterial infections (1.4)  Ophthalmic infections (1.5)  Anthrax, including inhalational anthrax (post-exposure) (1.6)  Alternative treatment for selected infections when penicillin is contraindicated (1.7)  Adjunctive therapy in acute intestinal amebiasis and severe acne (1.8)  Prophylaxis of malaria (1.9)               Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.10).</IndicationAndUsage>
    <Description>Doxycycline hyclate delayed-release tablets, USP contain specially coated pellets of doxycycline hyclate, USP, a tetracycline class drug synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration. The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical name for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)] -4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2- carboxamide  monohydrochloride, compound with ethyl alcohol (2:1),  monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet contains doxycycline 75 mg, 100 mg, 150 mg and 200 mg (equivalent to doxycycline hyclate 86.55 mg, 115.41 mg, 173.11 mg and 230.82). Inactive ingredients in the tablet formulation are: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, hypromellose, hypromellose phthalate, lactose anhydrous, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 6000, povidone (K-30), sodium chloride, talc and triethyl citrate. Each doxycycline hyclate delayed-release tablets 75 mg contains 4.7 mg (0.204 mEq) of sodium, each doxycycline hyclate delayed-release tablets 100 mg contains 6.3 mg (0.274 mEq) of sodium, each doxycycline hyclate delayed-release tablets 150 mg contains 9.4 mg (0.409 mEq) of sodium and each doxycycline hyclate delayed-release tablets 200 mg contains 12.6 mg (0.548 mEq) of sodium.  This drug product meets USP Dissolution Test 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-482-91</NDCCode>
    <PackageDescription>1000 TABLET, DELAYED RELEASE in 1 BOTTLE (62332-482-91) </PackageDescription>
    <NDC11Code>62332-0482-91</NDC11Code>
    <ProductNDC>62332-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
    <DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220104</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213075</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220104</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxycycline hyclate delayed-release tablets are a tetracycline-class drug indicated for:  Rickettsial infections (1.1)  Sexually transmitted infections (1.2)  Respiratory tract infections (1.3)  Specific bacterial infections (1.4)  Ophthalmic infections (1.5)  Anthrax, including inhalational anthrax (post-exposure) (1.6)  Alternative treatment for selected infections when penicillin is contraindicated (1.7)  Adjunctive therapy in acute intestinal amebiasis and severe acne (1.8)  Prophylaxis of malaria (1.9)               Usage. To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate delayed-release tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.10).</IndicationAndUsage>
    <Description>Doxycycline hyclate delayed-release tablets, USP contain specially coated pellets of doxycycline hyclate, USP, a tetracycline class drug synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration. The structural formula for doxycycline hyclate, USP is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical name for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)] -4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2- carboxamide  monohydrochloride, compound with ethyl alcohol (2:1),  monohydrate. Doxycycline hyclate, USP is a yellow to light yellow powder, freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet contains doxycycline 75 mg, 100 mg, 150 mg and 200 mg (equivalent to doxycycline hyclate 86.55 mg, 115.41 mg, 173.11 mg and 230.82). Inactive ingredients in the tablet formulation are: colloidal silicon dioxide, corn starch, croscarmellose sodium, crospovidone, hypromellose, hypromellose phthalate, lactose anhydrous, lactose monohydrate, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 6000, povidone (K-30), sodium chloride, talc and triethyl citrate. Each doxycycline hyclate delayed-release tablets 75 mg contains 4.7 mg (0.204 mEq) of sodium, each doxycycline hyclate delayed-release tablets 100 mg contains 6.3 mg (0.274 mEq) of sodium, each doxycycline hyclate delayed-release tablets 150 mg contains 9.4 mg (0.409 mEq) of sodium and each doxycycline hyclate delayed-release tablets 200 mg contains 12.6 mg (0.548 mEq) of sodium.  This drug product meets USP Dissolution Test 5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-482-17</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-482-17)  &gt; 10 mL in 1 VIAL, MULTI-DOSE (63323-482-01) </PackageDescription>
    <NDC11Code>63323-0482-17</NDC11Code>
    <ProductNDC>63323-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride,epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>10; .01</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-482-26</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-482-26)  / 20 mL in 1 VIAL, MULTI-DOSE (63323-482-41) </PackageDescription>
    <NDC11Code>63323-0482-26</NDC11Code>
    <ProductNDC>63323-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride,epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>10; .01</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C 14H 22N 2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C 9H 13NO 3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-482-27</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-482-27)  &gt; 20 mL in 1 VIAL, MULTI-DOSE (63323-482-03) </PackageDescription>
    <NDC11Code>63323-0482-27</NDC11Code>
    <ProductNDC>63323-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride,epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>10; .01</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-482-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-482-57)  &gt; 50 mL in 1 VIAL, MULTI-DOSE (63323-482-05) </PackageDescription>
    <NDC11Code>63323-0482-57</NDC11Code>
    <ProductNDC>63323-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride,epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>10; .01</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>71205-482-25</NDCCode>
    <PackageDescription>25 TABLET in 1 BOTTLE (71205-482-25) </PackageDescription>
    <NDC11Code>71205-0482-25</NDC11Code>
    <ProductNDC>71205-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nitroglycerin</ProprietaryName>
    <NonProprietaryName>Nitroglycerin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>SUBLINGUAL</RouteName>
    <StartMarketingDate>20190430</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211604</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>NITROGLYCERIN</SubstanceName>
    <StrengthNumber>.4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-05-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201006</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nitroglycerin sublingual tablets are indicated for the acute relief of an attack or acute prophylaxis of angina pectoris due to coronary artery disease.</IndicationAndUsage>
    <Description>Nitroglycerin sublingual tablets, USP are a stabilized sublingual compressed nitroglycerin tablet that contains 0.3 mg, 0.4 mg, or 0.6 mg nitroglycerin. The sublingual tablets also contain the inactive ingredients lactose monohydrate, glyceryl monostearate, pregelatinized corn starch, calcium stearate, and hydrophobic colloidal silica. Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is. C3H5N309. Molecular weight: 227.09.</Description>
  </NDC>
  <NDC>
    <NDCCode>71610-482-60</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (71610-482-60) </PackageDescription>
    <NDC11Code>71610-0482-60</NDC11Code>
    <ProductNDC>71610-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxazosin</ProprietaryName>
    <NonProprietaryName>Doxazosin Mesylate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180417</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209013</ApplicationNumber>
    <LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
    <SubstanceName>DOXAZOSIN MESYLATE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201110</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxazosin tablets are an alpha1 adrenergic antagonist indicated for: (1): 1 Signs and symptoms of Benign Prostatic Hyperplasia (BPH), 2 Treatment of Hypertension.</IndicationAndUsage>
    <Description>Doxazosin tablets, USP is a quinazoline compound that is a selective inhibitor of the alpha1 subtype of alpha-adrenergic receptors. The chemical name of doxazosin mesylate, USP is 1-(4-Amino-6,7-dimethoxy-2-quinazolinyl)-4-(1,4 benzodioxan-2-ylcarbonyl) piperazine methanesulfonate. The molecular formula for doxazosin mesylate is C23H25N5O5 ∙ CH4O3S and the molecular weight is 547.6. It has the following structure. Doxazosin mesylate, USP is freely soluble in dimethylsulfoxide, soluble in dimethylformamide, slightly soluble in methanol, ethanol, and water (0.8% at 25°C), and very slightly soluble in acetone and methylene chloride. Doxazosin Tablets, USP are available as tablets for oral use and contains 1 mg, 2 mg, 4 mg and 8 mg of doxazosin as the free base. The inactive ingredients for all tablets are: microcrystalline cellulose, anhydrous lactose, sodium starch glycolate, magnesium stearate and sodium lauryl sulfate.</Description>
  </NDC>
  <NDC>
    <NDCCode>72511-482-01</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (72511-482-01)  / .4 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>72511-0482-01</NDC11Code>
    <ProductNDC>72511-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amjevita</ProprietaryName>
    <NonProprietaryName>Adalimumab-atto</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230814</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761024</ApplicationNumber>
    <LabelerName>Amgen USA Inc.</LabelerName>
    <SubstanceName>ADALIMUMAB</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/.4mL</StrengthUnit>
    <Pharm_Classes>Antibodies, Monoclonal [CS], Tumor Necrosis Factor Blocker [EPC], Tumor Necrosis Factor Receptor Blocking Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230814</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>AMJEVITA is a tumor necrosis factor (TNF) blocker indicated for: : 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn's disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers., 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in patients 12 years of age and older. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adults and pediatric patients 2 years of age and older. (1.9).</IndicationAndUsage>
    <Description>Adalimumab-atto is a tumor necrosis factor blocker. Adalimumab-atto is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-atto is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. AMJEVITA® (adalimumab-atto) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SureClick autoinjector, or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of AMJEVITA is clear, colorless to slightly yellow, with a pH of about 5.2. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of AMJEVITA is formulated with L-lactic acid (1.7 mg), polysorbate 80 (0.8 mg), sodium hydroxide for pH adjustment, sucrose (67 mg), and Water for Injection, USP, pH 5.2. Each 40 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of AMJEVITA is formulated with glacial acetic acid (0.48 mg), polysorbate 80 (0.8 mg), sodium hydroxide for pH adjustment, sucrose (72 mg), and Water for Injection, USP, pH 5.2. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of AMJEVITA is formulated with L-lactic acid (0.9 mg), polysorbate 80 (0.4 mg), sodium hydroxide for pH adjustment, sucrose (34 mg), and Water for Injection, USP, pH 5.2. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of AMJEVITA is formulated with glacial acetic acid (0.24 mg), polysorbate 80 (0.4 mg), sodium hydroxide for pH adjustment, sucrose (36 mg), and Water for Injection, USP, pH 5.2. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of AMJEVITA is formulated with L-lactic acid (0.4 mg), polysorbate 80 (0.2 mg), sodium hydroxide for pH adjustment, sucrose (17 mg), and Water for Injection, USP, pH 5.2. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of AMJEVITA is formulated with glacial acetic acid (0.12 mg), polysorbate 80 (0.2 mg), sodium hydroxide for pH adjustment, sucrose (18 mg), and Water for Injection, USP, pH 5.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>72511-482-02</NDCCode>
    <PackageDescription>2 SYRINGE in 1 CARTON (72511-482-02)  / .4 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>72511-0482-02</NDC11Code>
    <ProductNDC>72511-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amjevita</ProprietaryName>
    <NonProprietaryName>Adalimumab-atto</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230814</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761024</ApplicationNumber>
    <LabelerName>Amgen USA Inc.</LabelerName>
    <SubstanceName>ADALIMUMAB</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/.4mL</StrengthUnit>
    <Pharm_Classes>Antibodies, Monoclonal [CS], Tumor Necrosis Factor Blocker [EPC], Tumor Necrosis Factor Receptor Blocking Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230814</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>AMJEVITA is a tumor necrosis factor (TNF) blocker indicated for: : 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn's disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6)Limitations of Use: Effectiveness has not been established in patients who have lost response to or were intolerant to TNF blockers., 7 Treatment of adult patients with moderate to severe chronic plaque psoriasis who are candidates for systemic therapy or phototherapy, and when other systemic therapies are medically less appropriate. (1.7), 8 Treatment of moderate to severe hidradenitis suppurativa in patients 12 years of age and older. (1.8), 9 Treatment of non-infectious intermediate, posterior, and panuveitis in adults and pediatric patients 2 years of age and older. (1.9).</IndicationAndUsage>
    <Description>Adalimumab-atto is a tumor necrosis factor blocker. Adalimumab-atto is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-atto is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. AMJEVITA® (adalimumab-atto) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SureClick autoinjector, or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of AMJEVITA is clear, colorless to slightly yellow, with a pH of about 5.2. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of AMJEVITA is formulated with L-lactic acid (1.7 mg), polysorbate 80 (0.8 mg), sodium hydroxide for pH adjustment, sucrose (67 mg), and Water for Injection, USP, pH 5.2. Each 40 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of AMJEVITA is formulated with glacial acetic acid (0.48 mg), polysorbate 80 (0.8 mg), sodium hydroxide for pH adjustment, sucrose (72 mg), and Water for Injection, USP, pH 5.2. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of AMJEVITA is formulated with L-lactic acid (0.9 mg), polysorbate 80 (0.4 mg), sodium hydroxide for pH adjustment, sucrose (34 mg), and Water for Injection, USP, pH 5.2. Each 20 mg/0.4 mL prefilled syringe delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of AMJEVITA is formulated with glacial acetic acid (0.24 mg), polysorbate 80 (0.4 mg), sodium hydroxide for pH adjustment, sucrose (36 mg), and Water for Injection, USP, pH 5.2. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of AMJEVITA is formulated with L-lactic acid (0.4 mg), polysorbate 80 (0.2 mg), sodium hydroxide for pH adjustment, sucrose (17 mg), and Water for Injection, USP, pH 5.2. Each 10 mg/0.2 mL prefilled syringe delivers 0.2 mL (10 mg) of drug product. Each 0.2 mL of AMJEVITA is formulated with glacial acetic acid (0.12 mg), polysorbate 80 (0.2 mg), sodium hydroxide for pH adjustment, sucrose (18 mg), and Water for Injection, USP, pH 5.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>84549-482-57</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (84549-482-57) </PackageDescription>
    <NDC11Code>84549-0482-57</NDC11Code>
    <ProductNDC>84549-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride,epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>ProPharma Distribution</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>10; .01</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250827</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGEsection for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C 14H 22N 2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C 9H 13NO 3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that areMethylParabenFree (MPF). Xylocaine MPFis a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocainein multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrineis a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.  Xylocaine with Epinephrinein multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>84612-482-01</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (84612-482-01)  / .4 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>84612-0482-01</NDC11Code>
    <ProductNDC>84612-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amjevita</ProprietaryName>
    <NonProprietaryName>Adalimumab-atto</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250101</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761024</ApplicationNumber>
    <LabelerName>Nuvaila Limited</LabelerName>
    <SubstanceName>ADALIMUMAB</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/.4mL</StrengthUnit>
    <Pharm_Classes>Antibodies, Monoclonal [CS], Tumor Necrosis Factor Blocker [EPC], Tumor Necrosis Factor Receptor Blocking Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>AMJEVITA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn's disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6).</IndicationAndUsage>
    <Description>Adalimumab-atto is a tumor necrosis factor blocker. Adalimumab-atto is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-atto is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. AMJEVITA® (adalimumab-atto) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SureClick autoinjector, or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of AMJEVITA is clear, colorless to slightly yellow, with a pH of about 5.2. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of AMJEVITA is formulated with L-lactic acid (1.7 mg), polysorbate 80 (0.8 mg), sodium hydroxide for pH adjustment, sucrose (67 mg), and Water for Injection, USP, pH 5.2. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of AMJEVITA is formulated with L-lactic acid (0.9 mg), polysorbate 80 (0.4 mg), sodium hydroxide for pH adjustment, sucrose (34 mg), and Water for Injection, USP, pH 5.2. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of AMJEVITA is formulated with L-lactic acid (0.4 mg), polysorbate 80 (0.2 mg), sodium hydroxide for pH adjustment, sucrose (17 mg), and Water for Injection, USP, pH 5.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>84612-482-02</NDCCode>
    <PackageDescription>2 SYRINGE in 1 CARTON (84612-482-02)  / .4 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>84612-0482-02</NDC11Code>
    <ProductNDC>84612-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amjevita</ProprietaryName>
    <NonProprietaryName>Adalimumab-atto</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250101</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761024</ApplicationNumber>
    <LabelerName>Nuvaila Limited</LabelerName>
    <SubstanceName>ADALIMUMAB</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/.4mL</StrengthUnit>
    <Pharm_Classes>Antibodies, Monoclonal [CS], Tumor Necrosis Factor Blocker [EPC], Tumor Necrosis Factor Receptor Blocking Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>AMJEVITA is a tumor necrosis factor (TNF) blocker indicated for: 1 Reducing signs and symptoms, inducing major clinical response, inhibiting the progression of structural damage, and improving physical function in adult patients with moderately to severely active rheumatoid arthritis. (1.1), 2 Reducing signs and symptoms of moderately to severely active polyarticular juvenile idiopathic arthritis in patients 2 years of age and older. (1.2), 3 Reducing signs and symptoms, inhibiting the progression of structural damage, and improving physical function in adult patients with active psoriatic arthritis. (1.3), 4 Reducing signs and symptoms in adult patients with active ankylosing spondylitis. (1.4), 5 Treatment of moderately to severely active Crohn's disease in adults and pediatric patients 6 years of age and older. (1.5), 6 Treatment of moderately to severely active ulcerative colitis in adult patients. (1.6).</IndicationAndUsage>
    <Description>Adalimumab-atto is a tumor necrosis factor blocker. Adalimumab-atto is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-atto is produced by recombinant DNA technology in a mammalian cell (Chinese Hamster Ovary (CHO)) expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. AMJEVITA® (adalimumab-atto) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled SureClick autoinjector, or as a single-dose, 1 mL prefilled glass syringe. Enclosed within the autoinjector is a single-dose, 1 mL prefilled glass syringe. The solution of AMJEVITA is clear, colorless to slightly yellow, with a pH of about 5.2. Each 80 mg/0.8 mL prefilled syringe or prefilled autoinjector delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of AMJEVITA is formulated with L-lactic acid (1.7 mg), polysorbate 80 (0.8 mg), sodium hydroxide for pH adjustment, sucrose (67 mg), and Water for Injection, USP, pH 5.2. Each 40 mg/0.4 mL prefilled syringe or prefilled autoinjector delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of AMJEVITA is formulated with L-lactic acid (0.9 mg), polysorbate 80 (0.4 mg), sodium hydroxide for pH adjustment, sucrose (34 mg), and Water for Injection, USP, pH 5.2. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of AMJEVITA is formulated with L-lactic acid (0.4 mg), polysorbate 80 (0.2 mg), sodium hydroxide for pH adjustment, sucrose (17 mg), and Water for Injection, USP, pH 5.2.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-0001-0</NDCCode>
    <PackageDescription>12 BLISTER PACK in 1 CARTON (50090-0001-0)  / 1 SUPPOSITORY in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>50090-0001-00</NDC11Code>
    <ProductNDC>50090-0001</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Acetaminophen</ProprietaryName>
    <ProprietaryNameSuffix>For Children</ProprietaryNameSuffix>
    <NonProprietaryName>Acetaminophen</NonProprietaryName>
    <DosageFormName>SUPPOSITORY</DosageFormName>
    <RouteName>RECTAL</RouteName>
    <StartMarketingDate>20101214</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA070607</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>ACETAMINOPHEN</SubstanceName>
    <StrengthNumber>120</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141128</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily : 1 reduces fever , 2 relieves minor aches, pains, and headache.</IndicationAndUsage>
  </NDC>
</NDCList>