RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>50090-0611-0</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (50090-0611-0)</PackageDescription>
    <NDC11Code>50090-0611-00</NDC11Code>
    <ProductNDC>50090-0611</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Ferrous Sulfate</ProprietaryName>
    <NonProprietaryName>Iron Supplement</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010219</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>FERROUS SULFATE</SubstanceName>
    <StrengthNumber>325</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>15631-0611-0</NDCCode>
    <PackageDescription>1 TABLET in 1 BLISTER PACK (15631-0611-0)</PackageDescription>
    <NDC11Code>15631-0611-00</NDC11Code>
    <ProductNDC>15631-0611</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Kali Muriaticum</ProprietaryName>
    <NonProprietaryName>Kali Muriaticum</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151207</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
    <SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>[hp_X]/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>33992-0611-0</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (33992-0611-0)  &gt; 10 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>33992-0611-00</NDC11Code>
    <ProductNDC>33992-0611</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Daytime</ProprietaryName>
    <ProprietaryNameSuffix>Multi-symptom Cold/flu Relief</ProprietaryNameSuffix>
    <NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide, And Phenylephrine Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130201</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>Greenbrier International</LabelerName>
    <SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>325; 10; 5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>temporarily relieves common cold/flu symptoms: 1 nasal congestion, 2 cough due to minor throat &amp; bronchial irritation, 3 sore throat, 4 headache, 5 minor aches &amp; pains, 6 fever.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>61990-0611-2</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (61990-0611-2)  / 10 mL in 1 VIAL, SINGLE-DOSE (61990-0611-0) </PackageDescription>
    <NDC11Code>61990-0611-02</NDC11Code>
    <ProductNDC>61990-0611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tranexamic Acid</ProprietaryName>
    <NonProprietaryName>Tranexamic Acid</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190930</StartMarketingDate>
    <EndMarketingDate>20240331</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212676</ApplicationNumber>
    <LabelerName>Apollo Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>TRANEXAMIC ACID</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-04-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20190930</StartMarketingDatePackage>
    <EndMarketingDatePackage>20240331</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tranexamic acid injection is indicated in patients with hemophilia for short-term use (2 to 8 days) to reduce or prevent hemorrhage and reduce the need for replacement therapy during and following tooth extraction.</IndicationAndUsage>
    <Description>Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid is a white crystalline powder. The structural formula is. Empirical Formula: C8H15NO2                         Molecular Weight: 157.2. Each mL of the sterile solution for intravenous injection contains 100 mg tranexamic acid and Water for Injection to 1 mL. The aqueous solution for injection has a pH of 6.5 to 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>67345-0611-0</NDCCode>
    <PackageDescription>8 g in 1 CARTON (67345-0611-0)</PackageDescription>
    <NDC11Code>67345-0611-00</NDC11Code>
    <ProductNDC>67345-0611</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Purminerals 4 In 1 Makeup Spf 15 Light</ProprietaryName>
    <NonProprietaryName>Titanium Dioxide</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20060717</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>PUR MINERALS</LabelerName>
    <SubstanceName>TITANIUM DIOXIDE</SubstanceName>
    <StrengthNumber>.72</StrengthNumber>
    <StrengthUnit>g/8g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>70518-0611-0</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (70518-0611-0) </PackageDescription>
    <NDC11Code>70518-0611-00</NDC11Code>
    <ProductNDC>70518-0611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metoprolol Succinate</ProprietaryName>
    <NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170707</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077298</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-06-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170707</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>0574-0611-05</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0574-0611-05)  / 3.5 mL in 1 BOTTLE, GLASS</PackageDescription>
    <NDC11Code>00574-0611-05</NDC11Code>
    <ProductNDC>0574-0611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Podofilox</ProprietaryName>
    <NonProprietaryName>Podofilox</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20020129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075600</ApplicationNumber>
    <LabelerName>Padagis US LLC</LabelerName>
    <SubstanceName>PODOFILOX</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Decreased Mitosis [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-03-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Podofilox Topical Solution 0.5% is indicated for the topical treatment of external genital warts (Condyloma acuminatum). This product is not indicated in the treatment of perianal or mucous membrane warts (see PRECAUTIONS).</IndicationAndUsage>
    <Description>Podofilox Topical Solution is an antimitotic drug which can be chemically synthesized or purified from the plant families Coniferae and Berberidaceae (e.g. species of Juniperus and Podophyllum). Podofilox Topical Solution 0.5% is formulated for topical administration. Each milliliter of solution contains 5 mg of podofilox, in a vehicle containing lactic acid and sodium lactate in alcohol 95%, USP. Podofilox has a molecular weight of 414.4 daltons, and is soluble in alcohol and sparingly soluble in water. Its chemical name is 5,8,8a,9-Tetrahydro-9-hydroxy-5-(3,4,5-trimethoxylphenyl)furo[3',4':6,7] naphtho[2,3,d]-1, 3-dioxol-6(5aH)-one. Podofilox has the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>10122-611-10</NDCCode>
    <PackageDescription>10 CARTON in 1 CARTON (10122-611-10)  / 1 VIAL, SINGLE-USE in 1 CARTON (10122-611-01)  / 100 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>10122-0611-10</NDC11Code>
    <ProductNDC>10122-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cleviprex</ProprietaryName>
    <NonProprietaryName>Clevipidine</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20080915</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022156</ApplicationNumber>
    <LabelerName>Chiesi USA, Inc.</LabelerName>
    <SubstanceName>CLEVIDIPINE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20080915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cleviprex is indicated for the reduction of blood pressure when oral therapy is not feasible or not desirable.</IndicationAndUsage>
    <Description>Cleviprex is a sterile, milky-white emulsion containing 0.5 mg/mL of clevidipine suitable for intravenous administration. Clevidipine is a dihydropyridine calcium channel blocker. Chemically, the active substance, clevidipine, is butyroxymethyl methyl 4-(2´,3´-dichlorophenyl)-1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate. It is a racemic mixture with a molecular weight of 456.3 g/mol. Each enantiomer has equipotent antihypertensive activity. The structure and formula are. Clevidipine is practically insoluble in water and is formulated in an oil-in-water emulsion. In addition to the active ingredient, clevidipine, Cleviprex contains soybean oil (200 mg/mL), glycerin (22.5 mg/mL), purified egg yolk phospholipids (12 mg/mL), oleic acid (0.3 mg/mL), disodium edetate (0.05 mg/mL), and sodium hydroxide to adjust pH. Cleviprex has a pH of 6.0 – 8.0 and is a ready-to-use emulsion.</Description>
  </NDC>
  <NDC>
    <NDCCode>13985-611-15</NDCCode>
    <PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (13985-611-15)  &gt; 15 mL in 1 BOTTLE, DROPPER</PackageDescription>
    <NDC11Code>13985-0611-15</NDC11Code>
    <ProductNDC>13985-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Proparacaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Proparacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20150327</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040277</ApplicationNumber>
    <LabelerName>MWI</LabelerName>
    <SubstanceName>PROPARACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Local Anesthesia [PE], Local Anesthetic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150327</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Proparacaine Hydrochloride Ophthalmic Solution is indicated for topical anesthesia in ophthalmic practice. Representative ophthalmic procedures in which the preparation provides good local anesthesia include measurement of intraocular pressure (tonometry), removal of foreign bodies and sutures from the cornea, conjunctival scraping in diagnosis and gonioscopic examination; it is also indicated for use as a topical anesthetic prior to surgical operations such as cataract extraction.</IndicationAndUsage>
    <Description>Proparacaine Hydrochloride Ophthalmic Solution USP, 0.5% is a local anesthetic for ophthalmic instillation. Each mL of sterile, aqueous solution contains: Active: Proparacaine Hydrochloride 5 mg (0.5%). Inactives: Glycerin as a stabilizer, Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust pH (3.5 to 6.0), and Water for Injection. Preservative: Benzalkonium Chloride 0.1 mg (0.01%). Proparacaine hydrochloride is designed chemically as 2-(Diethylamino)ethyl 3-amino-4-propoxybenzoate monohydrochloride. The active ingredient is represented by the structural formula:.</Description>
  </NDC>
  <NDC>
    <NDCCode>23155-611-04</NDCCode>
    <PackageDescription>250 TABLET, DELAYED RELEASE in 1 BOTTLE (23155-611-04) </PackageDescription>
    <NDC11Code>23155-0611-04</NDC11Code>
    <ProductNDC>23155-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <ProprietaryNameSuffix>Delayed Release</ProprietaryNameSuffix>
    <NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
    <DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180316</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200856</ApplicationNumber>
    <LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180316</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxycycline hyclate delayed-release tablets are a tetracycline-class drug indicated for: Rickettsial infections (1.1) Sexually transmitted infections (1.2) Respiratory tract infections (1.3) Specific bacterial infections (1.4) Ophthalmic infections (1.5) Anthrax, including inhalational anthrax (post-exposure) (1.6) Alternative treatment for selected infections when penicillin is contraindicated (1.7) Adjunctive therapy in acute intestinal amebiasis and severe acne (1.8) Prophylaxis of malaria (1.9). UsageTo reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate delayed-release tablets, should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.10).</IndicationAndUsage>
    <Description>Doxycycline hyclate delayed-release tablets, USP, contain specially coated pellets of doxycycline hyclate, a tetracycline class drug synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration. The structural formula for doxycycline hyclate is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical name for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet contains doxycycline 75 mg, 100 mg, 150 mg or 200 mg (equivalent to doxycycline hyclate 86.6 mg, 115.4 mg, 173.1 mg or 230.8 mg). Inactive ingredients in the tablet formulation are: lactose monohydrate, microcrystalline cellulose; sodium lauryl sulfate, sodium chloride, hypromellose phthalate, hypromellose, triethyl citrate, anhydrous lactose, crospovidone, stearic acid, magnesium stearate. The tablets also contain opadry 03K29121 clear, which contains: hypromellose and triacetin. Each doxycycline hyclate delayed-release tablets 75 mg tablet contains 4.8 mg (0.208 mEq) of sodium, each doxycycline hyclate delayed-release tablets 100 mg tablet contains 6.4 mg (0.278 mEq) of sodium, each doxycycline hyclate delayed-release tablets 150 mg tablet contains 9.6 mg (0.417 mEq) of sodium, and each doxycycline hyclate delayed-release tablets 200 mg tablet contains 12.8 mg (0.556 mEq) of sodium. USP dissolution test pending.</Description>
  </NDC>
  <NDC>
    <NDCCode>23155-611-06</NDCCode>
    <PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (23155-611-06) </PackageDescription>
    <NDC11Code>23155-0611-06</NDC11Code>
    <ProductNDC>23155-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <ProprietaryNameSuffix>Delayed Release</ProprietaryNameSuffix>
    <NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
    <DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180316</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200856</ApplicationNumber>
    <LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180316</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxycycline hyclate delayed-release tablets are a tetracycline-class drug indicated for: Rickettsial infections (1.1) Sexually transmitted infections (1.2) Respiratory tract infections (1.3) Specific bacterial infections (1.4) Ophthalmic infections (1.5) Anthrax, including inhalational anthrax (post-exposure) (1.6) Alternative treatment for selected infections when penicillin is contraindicated (1.7) Adjunctive therapy in acute intestinal amebiasis and severe acne (1.8) Prophylaxis of malaria (1.9). UsageTo reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate delayed-release tablets, should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.10).</IndicationAndUsage>
    <Description>Doxycycline hyclate delayed-release tablets, USP, contain specially coated pellets of doxycycline hyclate, a tetracycline class drug synthetically derived from oxytetracycline, in a delayed-release formulation for oral administration. The structural formula for doxycycline hyclate is. with a molecular formula of C22H24N2O8, HCl, ½ C2H6O, ½ H2O and a molecular weight of 512.9. The chemical name for doxycycline hyclate is [4S(4aR,5S,5aR,6R,12aS)]-4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-deoxonaphthacene-2-carboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each tablet contains doxycycline 75 mg, 100 mg, 150 mg or 200 mg (equivalent to doxycycline hyclate 86.6 mg, 115.4 mg, 173.1 mg or 230.8 mg). Inactive ingredients in the tablet formulation are: lactose monohydrate, microcrystalline cellulose; sodium lauryl sulfate, sodium chloride, hypromellose phthalate, hypromellose, triethyl citrate, anhydrous lactose, crospovidone, stearic acid, magnesium stearate. The tablets also contain opadry 03K29121 clear, which contains: hypromellose and triacetin. Each doxycycline hyclate delayed-release tablets 75 mg tablet contains 4.8 mg (0.208 mEq) of sodium, each doxycycline hyclate delayed-release tablets 100 mg tablet contains 6.4 mg (0.278 mEq) of sodium, each doxycycline hyclate delayed-release tablets 150 mg tablet contains 9.6 mg (0.417 mEq) of sodium, and each doxycycline hyclate delayed-release tablets 200 mg tablet contains 12.8 mg (0.556 mEq) of sodium. USP dissolution test pending.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-611-10</NDCCode>
    <PackageDescription>10 VIAL in 1 CARTON (25021-611-10)  &gt; 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0611-10</NDC11Code>
    <ProductNDC>25021-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Neostigmine Methylsulfate</ProprietaryName>
    <NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210652</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-01-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220115</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Neostigmine methylsulfate injection is a cholinesterase inhibitor indicated for the reversal of the effects of non-depolarizing neuromuscular blocking agents after surgery.</IndicationAndUsage>
    <Description>Neostigmine methylsulfate, USP, a cholinesterase inhibitor, is (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. The structural formula is:. Neostigmine methylsulfate, USP is a white crystalline powder and is very soluble in water and soluble in alcohol. Neostigmine Methylsulfate Injection, USP is a sterile, nonpyrogenic solution intended for intravenous use. Each mL of the 0.5 mg per mL strength contains neostigmine methylsulfate, USP 0.5 mg, phenol 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 1 mg per mL strength contains neostigmine methylsulfate, USP 1 mg, phenol 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>43063-611-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43063-611-60) </PackageDescription>
    <NDC11Code>43063-0611-60</NDC11Code>
    <ProductNDC>43063-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121016</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078926</ApplicationNumber>
    <LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gabapentin tablets are indicated for: 1   Postherpetic neuralgia in adults ( 1) , 2   Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy ( 1) .</IndicationAndUsage>
    <Description>The active ingredient in gabapentin tablets, USP is gabapentin USP which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white powder with a pK a1of 3.7 and a pK a2of 10.7. It is freely soluble in water, 0.1 N hydrochloric acid, 0.1 N sodium hydroxide and glacial acetic acid; slightly soluble in methanol, very slightly soluble in ethanol, 2-propanol; insoluble in toluene. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin tablet, USP intended for oral administration contains 600 mg and 800 mg of gabapentin. In addition each tablet contains following inactive ingredients: copovidone, low substituted hydroxypropyl cellulose, magnesium stearate, mannitol, poloxamer, povidone and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>43063-611-90</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43063-611-90) </PackageDescription>
    <NDC11Code>43063-0611-90</NDC11Code>
    <ProductNDC>43063-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20121016</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078926</ApplicationNumber>
    <LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150504</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gabapentin tablets are indicated for: 1   Postherpetic neuralgia in adults ( 1) , 2   Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy ( 1) .</IndicationAndUsage>
    <Description>The active ingredient in gabapentin tablets, USP is gabapentin USP which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white powder with a pK a1of 3.7 and a pK a2of 10.7. It is freely soluble in water, 0.1 N hydrochloric acid, 0.1 N sodium hydroxide and glacial acetic acid; slightly soluble in methanol, very slightly soluble in ethanol, 2-propanol; insoluble in toluene. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin tablet, USP intended for oral administration contains 600 mg and 800 mg of gabapentin. In addition each tablet contains following inactive ingredients: copovidone, low substituted hydroxypropyl cellulose, magnesium stearate, mannitol, poloxamer, povidone and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>43598-611-11</NDCCode>
    <PackageDescription>1 mL in 1 VIAL, GLASS (43598-611-11) </PackageDescription>
    <NDC11Code>43598-0611-11</NDC11Code>
    <ProductNDC>43598-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Docetaxel</ProprietaryName>
    <NonProprietaryName>Docetaxel</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204193</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
    <SubstanceName>DOCETAXEL</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-12-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel has the following structural formula. Docetaxel USP is a white to almost-white crystalline powder with molecular formula of C43H53NO14 and a molecular weight of 808. It is freely soluble in anhydrous ethanol, soluble in methylene chloride and methanol, practically insoluble in water. One-vial Docetaxel Injection USP. Docetaxel injection USP is a sterile, non-pyrogenic, pale yellow to brownish-yellow solution at 20 mg/mL concentration. Each mL contains 20 mg docetaxel (anhydrous) 3 mg citric acid anhydrous in 0.54 grams polysorbate 80 and 0.395 grams dehydrated alcohol solution. The pH of the formulation is 3 to 4.5. Docetaxel injection USP is available in single-dose vials containing 20 mg (1 mL) or 80 mg (4 mL) docetaxel (anhydrous). Docetaxel injection USP requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>44567-611-10</NDCCode>
    <PackageDescription>10 BAG in 1 CARTON (44567-611-10)  / 100 mL in 1 BAG (44567-611-01) </PackageDescription>
    <NDC11Code>44567-0611-10</NDC11Code>
    <ProductNDC>44567-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Midazolam In Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Midazolam</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20201231</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA211844</ApplicationNumber>
    <LabelerName>WG Critical Care, LLC.</LabelerName>
    <SubstanceName>MIDAZOLAM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-08-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210419</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Midazolam in 0.9% Sodium Chloride Injection is indicated: 1 Continuous intravenous infusion for sedation of intubated and mechanically ventilated adult, pediatric, and neonatal patients as a component of anesthesia or during treatment in a critical care setting. .</IndicationAndUsage>
    <Description>Midazolam in 0.9% Sodium Chloride Injection is a benzodiazepine available as a sterile, preservative-free, nonpyrogenic solution of midazolam and sodium chloride in water for injection for intravenous use. Each single-dose bag of Midazolam in 0.9% Sodium Chloride Injection contains either 50 mg/50 mL (1 mg/mL) or 100 mg/100 mL (1 mg/mL) of midazolam and 9 mg/mL of sodium chloride in water for injection. Midazolam in Sodium Chloride Injection may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. The pH is approximately 2.5 - 3.5. Midazolam is a white to light yellow crystalline compound, insoluble in water, freely soluble in ethanol, soluble in methanol. Chemically, midazolam is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine. Midazolam has the empirical formula C18H13ClFN3, a calculated molecular weight of 325.77 and the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-611-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (46708-611-90) </PackageDescription>
    <NDC11Code>46708-0611-90</NDC11Code>
    <ProductNDC>46708-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160322</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078894</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.125</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160322</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride tablets are non-ergot dopamine agonist indicated for the treatment of. ·  Parkinson’s disease (PD) (1.1).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride tablets contain pramipexole, a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride is (S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate USP. Inactive ingredients consist of betacyclodextrin (betadex), corn starch, colloidal silicon dioxide, povidone, magnesium stearate and microcrystalline cellulose.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0611-1</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0611-1)</PackageDescription>
    <NDC11Code>49288-0611-01</NDC11Code>
    <ProductNDC>49288-0611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Number Two Weed Mixture</ProprietaryName>
    <NonProprietaryName>Number Two Weed Mixture</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN</SubstanceName>
    <StrengthNumber>.01; .01; .01; .01; .01</StrengthNumber>
    <StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0611-2</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0611-2)</PackageDescription>
    <NDC11Code>49288-0611-02</NDC11Code>
    <ProductNDC>49288-0611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Number Two Weed Mixture</ProprietaryName>
    <NonProprietaryName>Number Two Weed Mixture</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN</SubstanceName>
    <StrengthNumber>.01; .01; .01; .01; .01</StrengthNumber>
    <StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0611-3</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0611-3)</PackageDescription>
    <NDC11Code>49288-0611-03</NDC11Code>
    <ProductNDC>49288-0611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Number Two Weed Mixture</ProprietaryName>
    <NonProprietaryName>Number Two Weed Mixture</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN</SubstanceName>
    <StrengthNumber>.01; .01; .01; .01; .01</StrengthNumber>
    <StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0611-4</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (49288-0611-4)</PackageDescription>
    <NDC11Code>49288-0611-04</NDC11Code>
    <ProductNDC>49288-0611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Number Two Weed Mixture</ProprietaryName>
    <NonProprietaryName>Number Two Weed Mixture</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN</SubstanceName>
    <StrengthNumber>.01; .01; .01; .01; .01</StrengthNumber>
    <StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>49288-0611-5</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (49288-0611-5)</PackageDescription>
    <NDC11Code>49288-0611-05</NDC11Code>
    <ProductNDC>49288-0611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Number Two Weed Mixture</ProprietaryName>
    <NonProprietaryName>Number Two Weed Mixture</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19740323</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102223</ApplicationNumber>
    <LabelerName>Antigen Laboratories, Inc.</LabelerName>
    <SubstanceName>XANTHIUM STRUMARIUM POLLEN; CHENOPODIUM ALBUM POLLEN; AMARANTHUS RETROFLEXUS POLLEN; RUMEX ACETOSELLA POLLEN; RUMEX CRISPUS POLLEN</SubstanceName>
    <StrengthNumber>.01; .01; .01; .01; .01</StrengthNumber>
    <StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Increased Histamine Release [PE],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
  </NDC>
  <NDC>
    <NDCCode>50458-611-01</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (50458-611-01)  / 3.5 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>50458-0611-01</NDC11Code>
    <ProductNDC>50458-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Invega Hafyera</ProprietaryName>
    <NonProprietaryName>Paliperidone Palmitate</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION, EXTENDED RELEASE</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20210830</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA207946</ApplicationNumber>
    <LabelerName>Janssen Pharmaceuticals, Inc</LabelerName>
    <SubstanceName>PALIPERIDONE PALMITATE</SubstanceName>
    <StrengthNumber>1092</StrengthNumber>
    <StrengthUnit>mg/3.5mL</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210830</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>INVEGA HAFYERA, an every-six-month injection, is indicated for the treatment of schizophrenia in adults after they have been adequately treated with: 1 A once-a-month paliperidone palmitate extended-release injectable suspension (e.g., INVEGA SUSTENNA) for at least four months, or, 2 An every-three-month paliperidone palmitate extended-release injectable suspension (e.g., INVEGA TRINZA) for at least one three-month cycle.</IndicationAndUsage>
    <Description>INVEGA HAFYERA ® contains a racemic mixture of (+)- and (-)- paliperidone palmitate. Paliperidone palmitate is an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical name is (9 RS)-3-[2-[4-(6-Fluoro-1,2-benzisoxazol-3-yl)piperidin-1-yl]ethyl]-2-methyl-4-oxo-6,7,8,9-tetrahydro-4 H-pyrido[1,2- a]pyrimadin-9-yl hexadecanoate. Its molecular formula is C 39H 57FN 4O 4 and its molecular weight is 664.89. The structural formula is:. Paliperidone palmitate is very slightly soluble in ethanol and methanol, practically insoluble in polyethylene glycol 400 and propylene glycol, and slightly soluble in ethyl acetate. INVEGA HAFYERA is available as a white to off-white sterile aqueous extended-release suspension for intramuscular injection in dose strengths of 1,092 mg and 1,560 mg paliperidone palmitate. The drug product hydrolyzes to the active moiety, paliperidone, resulting in dose strengths of 700 mg, and 1,000 mg of paliperidone, respectively. The inactive ingredients are polysorbate 20 (10 mg/mL), polyethylene glycol 4000 (75 mg/mL), citric acid monohydrate (7.5 mg/mL), sodium dihydrogen phosphate monohydrate (6 mg/mL), sodium hydroxide (5.4 mg/mL), and water for injection. INVEGA HAFYERA is provided in a single-dose prefilled syringe (cyclic-olefin-copolymer) prefilled with either 700 mg (3.5 mL), or 1,000 mg (5.0 mL) paliperidone (as 1,092 mg, or 1,560 mg paliperidone palmitate) suspension with a tip cap, plunger rod, backstop and a thin walled 20G, 1½-inch safety needle.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-611-01</NDCCode>
    <PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (50742-611-01) </PackageDescription>
    <NDC11Code>50742-0611-01</NDC11Code>
    <ProductNDC>50742-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxcarbazepine</ProprietaryName>
    <NonProprietaryName>Oxcarbazepine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215796</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>OXCARBAZEPINE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxcarbazepine extended-release tablets are indicated for the treatment of partial-onset seizures in patients 6 years of age and older.</IndicationAndUsage>
    <Description>Oxcarbazepine is an antiepileptic drug (AED). Oxcarbazepine extended-release tablets contain oxcarbazepine for once-a-day oral administration. Oxcarbazepine is 10,11-Dihydro-10-oxo-5H-dibenz[b,f]-azepine-5-carboxamide, and its structural formula is. Oxcarbazepine is Light orange to creamish white or Off-white powder. Oxcarbazepine is sparingly soluble in chloroform (30-100 g/L). In aqueous media over pH range 1 to 8, oxcarbazepine is practically insoluble and its solubility is 40 mg/L (0.04 g/L) at pH 7.0, 25°C.  The molecular formula is C15H12N2O2 and its molecular weight is 252.27. Oxcarbazepine extended-release tablets tablets contain the following inactive ingredients: microcrystalline cellulose, sodium starch glycolate, sodium lauryl sulfate, fumaric acid, povidone, hypromellose, colloidal silicon dioxide, magnesium stearate, Carboxymethyl cellulose sodium, polyvinyl alcohol, FD&amp;C Yellow 6 lake, polyethylene glycol, talc, D&amp;C Red No. 30 Lake and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>51407-611-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE, PLASTIC (51407-611-10) </PackageDescription>
    <NDC11Code>51407-0611-10</NDC11Code>
    <ProductNDC>51407-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Meloxicam</ProprietaryName>
    <NonProprietaryName>Meloxicam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20061207</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077918</ApplicationNumber>
    <LabelerName>Golden State Medical Supply, Inc.</LabelerName>
    <SubstanceName>MELOXICAM</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211007</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Meloxicam is a non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥60 kg ( 1.3) .</IndicationAndUsage>
    <Description>Meloxicam Tablets are a nonsteroidal anti-inflammatory drug (NSAID). Each pastel yellow Meloxicam Tablets contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula:. Meloxicam is a pastel yellow solid, practically insoluble in water, with higher solubility observed in strong acids and bases. It is very slightly soluble in methanol. Meloxicam has an apparent partition coefficient (log P) app= 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Meloxicam Tablets are available as tablets for oral administration containing 7.5 mg or 15 mg meloxicam. The inactive ingredients in Meloxicam Tablets include Colloidal Silicon Dioxide, Sodium Starch Glycolate, Lactose, Magnesium Stearate, Microcrystalline Cellulose, Povidone K-30, and Sodium Citrate.</Description>
  </NDC>
  <NDC>
    <NDCCode>51407-611-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (51407-611-90) </PackageDescription>
    <NDC11Code>51407-0611-90</NDC11Code>
    <ProductNDC>51407-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Meloxicam</ProprietaryName>
    <NonProprietaryName>Meloxicam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20061207</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077918</ApplicationNumber>
    <LabelerName>Golden State Medical Supply, Inc.</LabelerName>
    <SubstanceName>MELOXICAM</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211007</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Meloxicam is a non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) ( 1.1) , 2 Rheumatoid Arthritis (RA) ( 1.2) , 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥60 kg ( 1.3) .</IndicationAndUsage>
    <Description>Meloxicam Tablets are a nonsteroidal anti-inflammatory drug (NSAID). Each pastel yellow Meloxicam Tablets contains 7.5 mg or 15 mg meloxicam for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula:. Meloxicam is a pastel yellow solid, practically insoluble in water, with higher solubility observed in strong acids and bases. It is very slightly soluble in methanol. Meloxicam has an apparent partition coefficient (log P) app= 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Meloxicam Tablets are available as tablets for oral administration containing 7.5 mg or 15 mg meloxicam. The inactive ingredients in Meloxicam Tablets include Colloidal Silicon Dioxide, Sodium Starch Glycolate, Lactose, Magnesium Stearate, Microcrystalline Cellulose, Povidone K-30, and Sodium Citrate.</Description>
  </NDC>
  <NDC>
    <NDCCode>52817-611-04</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (52817-611-04)  / 1 PATCH in 1 POUCH / 1 d in 1 PATCH</PackageDescription>
    <NDC11Code>52817-0611-04</NDC11Code>
    <ProductNDC>52817-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clonidine Transdermal System Usp, 0.2 Mg/day</ProprietaryName>
    <NonProprietaryName>Clonidine Transdermal System</NonProprietaryName>
    <DosageFormName>PATCH</DosageFormName>
    <RouteName>TRANSDERMAL</RouteName>
    <StartMarketingDate>20230630</StartMarketingDate>
    <EndMarketingDate>20261030</EndMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA018891</ApplicationNumber>
    <LabelerName>TruPharma, LLC</LabelerName>
    <SubstanceName>CLONIDINE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/d</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20230630</StartMarketingDatePackage>
    <EndMarketingDatePackage>20261030</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clonidine transdermal system is indicated in the treatment of hypertension. It may be employed alone or concomitantly with other antihypertensive agents.</IndicationAndUsage>
    <Description>Clonidine Transdermal System, USP provides continuous systemic delivery of clonidine for 7 days at an approximately constant rate. Clonidine is a centrally acting alpha‑agonist hypotensive agent. It is an imidazoline derivative with the chemical name 2,6‑dichloro‑N‑2‑imidazolidinylidenebenzenamine and has the following chemical structure.</Description>
  </NDC>
  <NDC>
    <NDCCode>55111-611-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (55111-611-30) </PackageDescription>
    <NDC11Code>55111-0611-30</NDC11Code>
    <ProductNDC>55111-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150814</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203354</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.375</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150814</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride extended-release tablets are indicated for the treatment of Parkinson's disease.</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride extended-release tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is (S)-2-amino-4,5,6,7-tetrahydro-6(propylamino)benzothiazole dihydrochloride monohydrate. Its molecular formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride USP is a white to almost white, crystalline powder. It is freely soluble in water, soluble in methanol, slightly soluble in alcohol (99.6%) and practically insoluble in methylene chloride. Melting occurs in the range of 293°C to 306°C, with decomposition. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg Pramipexole Dihydrochloride, USP. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg Pramipexole Dihydrochloride, USP. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg Pramipexole Dihydrochloride, USP. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg Pramipexole Dihydrochloride, USP. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg Pramipexole Dihydrochloride, USP. Inactive ingredients for all strengths of pramipexole dihydrochloride extended-release tablets consist of carbomer homopolymer, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and pregelatinized starch.</Description>
  </NDC>
  <NDC>
    <NDCCode>57297-611-01</NDCCode>
    <PackageDescription>1 INJECTION, POWDER, FOR SOLUTION in 1 BOX (57297-611-01)</PackageDescription>
    <NDC11Code>57297-0611-01</NDC11Code>
    <ProductNDC>57297-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone</ProprietaryName>
    <NonProprietaryName>Ceftriaxone</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20090601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065125</ApplicationNumber>
    <LabelerName>LUPIN LIMITED</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Before instituting treatment with ceftriaxone, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ceftriaxone for injection USP and other antibacterial drugs, ceftriaxone for injection USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection USP is indicated for the treatment of the following infections when caused by susceptible organisms. Lower Respiratory Tract Infections. caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. Acute Bacterial Otitis Media. caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta-lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of ceftriaxone for injection USP compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose ceftriaxone for injection USP and the comparator. The potentially lower clinical cure rate of ceftriaxone for injection USP should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). Skin and Skin Structure Infections. caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii*, Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis* or Peptostreptococcus species. Urinary Tract Infections (complicated and uncomplicated). caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. Uncomplicated Gonorrhea (cervical/urethral and rectal). caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. Pelvic Inflammatory Disease. caused by Neisseria gonorrhoeae. Ceftriaxone sodium, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. Bacterial Septicemia. caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. Bone and Joint Infections. caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. Intra-Abdominal Infections. caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species. Meningitis. caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for injection USP has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis* and Escherichia coli.*. *Efficacy for this organism in this organ system was studied in fewer than ten infections. Surgical Prophylaxis. The preoperative administration of a single 1 g dose of ceftriaxone for injection USP may reduce the incidence of postoperative infections in patients undergoing surgical procedures classified as contaminated or potentially contaminated (e.g., vaginal or abdominal hysterectomy or cholecystectomy for chronic calculous cholecystitis in high-risk patients, such as those over 70 years of age, with acute cholecystitis not requiring therapeutic antimicrobials, obstructive jaundice or common duct bile stones) and in surgical patients for whom infection at the operative site would present serious risk (e.g., during coronary artery bypass surgery). Although ceftriaxone for injection USP has been shown to have been as effective as cefazolin in the prevention of infection following coronary artery bypass surgery, no placebo-controlled trials have been conducted to evaluate any cephalosporin antibiotic in the prevention of infection following coronary artery bypass surgery. When administered prior to surgical procedures for which it is indicated, a single 1 g dose of ceftriaxone for injection USP provides protection from most infections due to susceptible organisms throughout the course of the procedure.</IndicationAndUsage>
    <Description>Ceftriaxone for injection USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S3 3.5H2O. It has a calculated molecular weight of 661.59 and the following structural formula:. Ceftriaxone for injection USP is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone for injection solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams of ceftriaxone activity. Ceftriaxone for injection USP contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
  <NDC>
    <NDCCode>57297-611-10</NDCCode>
    <PackageDescription>10 INJECTION, POWDER, FOR SOLUTION in 1 BOX (57297-611-10)</PackageDescription>
    <NDC11Code>57297-0611-10</NDC11Code>
    <ProductNDC>57297-611</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone</ProprietaryName>
    <NonProprietaryName>Ceftriaxone</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20090601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065125</ApplicationNumber>
    <LabelerName>LUPIN LIMITED</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Before instituting treatment with ceftriaxone, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of ceftriaxone for injection USP and other antibacterial drugs, ceftriaxone for injection USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for injection USP is indicated for the treatment of the following infections when caused by susceptible organisms. Lower Respiratory Tract Infections. caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens. Acute Bacterial Otitis Media. caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta-lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of ceftriaxone for injection USP compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose ceftriaxone for injection USP and the comparator. The potentially lower clinical cure rate of ceftriaxone for injection USP should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES). Skin and Skin Structure Infections. caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii*, Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis* or Peptostreptococcus species. Urinary Tract Infections (complicated and uncomplicated). caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae. Uncomplicated Gonorrhea (cervical/urethral and rectal). caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae. Pelvic Inflammatory Disease. caused by Neisseria gonorrhoeae. Ceftriaxone sodium, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added. Bacterial Septicemia. caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae. Bone and Joint Infections. caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species. Intra-Abdominal Infections. caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species. Meningitis. caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for injection USP has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis* and Escherichia coli.*. *Efficacy for this organism in this organ system was studied in fewer than ten infections. Surgical Prophylaxis. The preoperative administration of a single 1 g dose of ceftriaxone for injection USP may reduce the incidence of postoperative infections in patients undergoing surgical procedures classified as contaminated or potentially contaminated (e.g., vaginal or abdominal hysterectomy or cholecystectomy for chronic calculous cholecystitis in high-risk patients, such as those over 70 years of age, with acute cholecystitis not requiring therapeutic antimicrobials, obstructive jaundice or common duct bile stones) and in surgical patients for whom infection at the operative site would present serious risk (e.g., during coronary artery bypass surgery). Although ceftriaxone for injection USP has been shown to have been as effective as cefazolin in the prevention of infection following coronary artery bypass surgery, no placebo-controlled trials have been conducted to evaluate any cephalosporin antibiotic in the prevention of infection following coronary artery bypass surgery. When administered prior to surgical procedures for which it is indicated, a single 1 g dose of ceftriaxone for injection USP provides protection from most infections due to susceptible organisms throughout the course of the procedure.</IndicationAndUsage>
    <Description>Ceftriaxone for injection USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo-3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo [4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The chemical formula of ceftriaxone sodium is C18H16N8Na2O7S3 3.5H2O. It has a calculated molecular weight of 661.59 and the following structural formula:. Ceftriaxone for injection USP is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of ceftriaxone for injection solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used. Each vial contains ceftriaxone sodium equivalent to 250 mg, 500 mg, 1 gram or 2 grams of ceftriaxone activity. Ceftriaxone for injection USP contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
</NDCList>