{
"NDC": [
{
"NDCCode": "50090-0686-0",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (50090-0686-0)",
"NDC11Code": "50090-0686-00",
"ProductNDC": "50090-0686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonazepam",
"NonProprietaryName": "Clonazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060628",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077856",
"LabelerName": "A-S Medication Solutions LLC",
"SubstanceName": "CLONAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2017-10-19"
},
{
"NDCCode": "70518-0686-0",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BLISTER PACK (70518-0686-0) ",
"NDC11Code": "70518-0686-00",
"ProductNDC": "70518-0686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetine Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170816",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202045",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-05-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170816",
"SamplePackage": "N"
},
{
"NDCCode": "71335-0686-0",
"PackageDescription": "60 TABLET in 1 BOTTLE (71335-0686-0) ",
"NDC11Code": "71335-0686-00",
"ProductNDC": "71335-0686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208963",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240403",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole tablets are indicated for the treatment of: : 1 Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.",
"Description": "Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "50090-0686-1",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (50090-0686-1)",
"NDC11Code": "50090-0686-01",
"ProductNDC": "50090-0686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonazepam",
"NonProprietaryName": "Clonazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060628",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077856",
"LabelerName": "A-S Medication Solutions LLC",
"SubstanceName": "CLONAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2017-10-19"
},
{
"NDCCode": "50090-0686-2",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (50090-0686-2)",
"NDC11Code": "50090-0686-02",
"ProductNDC": "50090-0686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonazepam",
"NonProprietaryName": "Clonazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060628",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077856",
"LabelerName": "A-S Medication Solutions LLC",
"SubstanceName": "CLONAZEPAM",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2017-10-19"
},
{
"NDCCode": "50090-4537-0",
"PackageDescription": "500 mL in 1 CONTAINER (50090-4537-0) ",
"NDC11Code": "50090-4537-00",
"ProductNDC": "50090-4537",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium In Dextrose",
"NonProprietaryName": "Heparin Sodium And Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19920720",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019952",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "DEXTROSE MONOHYDRATE; HEPARIN SODIUM",
"StrengthNumber": "5; 5000",
"StrengthUnit": "g/100mL; [USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190919",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in 5% Dextrose Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation), 4 Prevention of clotting in arterial and cardiac surgery, 5 Prophylaxis and treatment of peripheral arterial embolism, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 5% Dextrose Injection is a sterile, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) and Hydrous Dextrose USP. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 5.6 (4.5 – 7.0) and the osmolarity mOsmol/L (calc.) is 315. The concentration of electrolytes is 38 mEq/L Sodium, 30 mEq/L Phosphate, and 15 mEq/L Citrate. 40 USP units/mL: Each 100 mL of the 20,000 USP units per 500 mL preparation contains: 4,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "0264-9567-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-9567-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-9567-10",
"ProductNDC": "0264-9567",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium In Dextrose",
"NonProprietaryName": "Heparin Sodium And Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19920720",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019952",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HEPARIN SODIUM; DEXTROSE MONOHYDRATE",
"StrengthNumber": "4000; 5",
"StrengthUnit": "[USP'U]/100mL; g/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920720",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in 5% Dextrose Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation), 4 Prevention of clotting in arterial and cardiac surgery, 5 Prophylaxis and treatment of peripheral arterial embolism, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 5% Dextrose Injection is a sterile, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) and Hydrous Dextrose USP. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 5.6 (4.5 – 7.0) and the osmolarity mOsmol/L (calc.) is 315. The concentration of electrolytes is 38 mEq/L Sodium, 30 mEq/L Phosphate, and 15 mEq/L Citrate. 40 USP units/mL: Each 100 mL of the 20,000 USP units per 500 mL preparation contains: 4,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "0264-9577-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-9577-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-9577-10",
"ProductNDC": "0264-9577",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium In Dextrose",
"NonProprietaryName": "Heparin Sodium And Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19920720",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019952",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HEPARIN SODIUM; DEXTROSE MONOHYDRATE",
"StrengthNumber": "5000; 5",
"StrengthUnit": "[USP'U]/100mL; g/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920720",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in 5% Dextrose Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation), 4 Prevention of clotting in arterial and cardiac surgery, 5 Prophylaxis and treatment of peripheral arterial embolism, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 5% Dextrose Injection is a sterile, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) and Hydrous Dextrose USP. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 5.6 (4.5 – 7.0) and the osmolarity mOsmol/L (calc.) is 315. The concentration of electrolytes is 38 mEq/L Sodium, 30 mEq/L Phosphate, and 15 mEq/L Citrate. 40 USP units/mL: Each 100 mL of the 20,000 USP units per 500 mL preparation contains: 4,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "0264-9587-20",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-9587-20) / 250 mL in 1 CONTAINER",
"NDC11Code": "00264-9587-20",
"ProductNDC": "0264-9587",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium In Dextrose",
"NonProprietaryName": "Heparin Sodium And Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19920720",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019952",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HEPARIN SODIUM; DEXTROSE MONOHYDRATE",
"StrengthNumber": "10000; 5",
"StrengthUnit": "[USP'U]/100mL; g/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19920720",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in 5% Dextrose Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation), 4 Prevention of clotting in arterial and cardiac surgery, 5 Prophylaxis and treatment of peripheral arterial embolism, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 5% Dextrose Injection is a sterile, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) and Hydrous Dextrose USP. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 5.6 (4.5 – 7.0) and the osmolarity mOsmol/L (calc.) is 315. The concentration of electrolytes is 38 mEq/L Sodium, 30 mEq/L Phosphate, and 15 mEq/L Citrate. 40 USP units/mL: Each 100 mL of the 20,000 USP units per 500 mL preparation contains: 4,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "0703-0686-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0703-0686-01) > 20 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00703-0686-01",
"ProductNDC": "0703-0686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Treprostinil",
"NonProprietaryName": "Treprostinil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20190930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206648",
"LabelerName": "Teva Parenteral Medicines, Inc.",
"SubstanceName": "TREPROSTINIL",
"StrengthNumber": "100",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2022-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190930",
"SamplePackage": "N",
"IndicationAndUsage": "Treprostinil Injection is a prostacyclin mimetic indicated for: 1 Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1), 2 Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).",
"Description": "Treprostinil Injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil Injection is supplied in 20 mL multidose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL, or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contains 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate, and Water for Injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2. Treprostinil is chemically stable at room temperature and neutral pH. Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-. 1H-benz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is."
},
{
"NDCCode": "12634-686-04",
"PackageDescription": "120 mL in 1 BOTTLE (12634-686-04)",
"NDC11Code": "12634-0686-04",
"ProductNDC": "12634-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisolone",
"NonProprietaryName": "Prednisolone",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20030227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040401",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "PREDNISOLONE",
"StrengthNumber": "15",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Prednisolone Oral Solution is indicated in the following conditions:. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Psoriatic arthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Ankylosing spondylitis. Acute and subacute bursitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus. Bullous dermatitis herpetiformis. Severe erythema multiforme. (Stevens-Johnson syndrome). Exfoliative dermatitis. Mycosis fungoides. Severe psoriasis. Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers. Herpes zoster ophthalmicus. Anterior segment inflammation. Diffuse posterior uveitis and choroiditis. Sympathetic ophthalmia. Allergic conjunctivitis. Keratitis. Chorioretinitis. Optic neuritis. Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis. Loeffler’s syndrome not manageable by other means. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults. Secondary thrombocytopenia in adults. Acquired (autoimmune) hemolytic anemia. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis. Regional enteritis. 12. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement. In addition to the above indications Prednisolone Oral Solution is indicated for systemic dermatomyositis (polymyositis).",
"Description": "Prednisolone Oral Solution contains prednisolone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisolone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; soluble in methanol and in dioxane; sparingly soluble in acetone and in alcohol; slightly soluble in chloroform. The chemical name for Prednisolone is Pregna- 1,4-diene-3,20-dione,11,17,21- trihydroxy-,(11β)- (anhydrous). Prednisolone Oral Solution contains 15 mg of prednisolone in each 5 mL. Benzoic acid, 0.1% is added as a preservative. It also contains alcohol 5%, citric acid, edetate disodium, glycerin, propylene glycol, purified water, sodium saccharin, sucrose, artificial wild cherry flavor, FD&C blue #1 and red #40."
},
{
"NDCCode": "21749-686-23",
"PackageDescription": "222 mL in 1 PACKAGE (21749-686-23)",
"NDC11Code": "21749-0686-23",
"ProductNDC": "21749-686",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Purell Foodservice Healthy Sp 0.5pct Bak Antimicrobial Foam",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20171015",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "GOJO Industries, Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".005",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-12-17",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"IndicationAndUsage": " Handwash to help decrease bacteria on the skin."
},
{
"NDCCode": "21749-686-89",
"PackageDescription": "1200 mL in 1 PACKAGE (21749-686-89) ",
"NDC11Code": "21749-0686-89",
"ProductNDC": "21749-686",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Purell Foodservice Healthy Sp 0.5pct Bak Antimicrobial Foam",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20171015",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "GOJO Industries, Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": ".005",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2024-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171015",
"SamplePackage": "N",
"IndicationAndUsage": " Handwash to help decrease bacteria on the skin."
},
{
"NDCCode": "31722-686-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (31722-686-01) ",
"NDC11Code": "31722-0686-01",
"ProductNDC": "31722-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220825",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216651",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2022-10-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220825",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine tablets and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult Patients Ketorolac Tromethamine Tablets are indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with IV or IM dosing of ketorolac tromethamine, and Ketorolac Tromethamine Tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine tablets and ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablets therapy is not to exceed 5 days.",
"Description": "Ketorolac tromethamine tablets, USP are a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine, USP is (±)-5-Benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the chemical structure is. Ketorolac tromethamine, USP is a racemic mixture of [-]S and [+]R ketorolac tromethamine, USP. Ketorolac tromethamine, USP may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine, USP has a pKa of 7.8 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.4. Its molecular formula is C 19H 24N 2O 6. Ketorolac tromethamine tablets, USP are available as round, white to off-white, film-coated, bevel edged biconvex tablets. Each tablet contains 10 mg ketorolac tromethamine, USP, the active ingredient, with added hydroxy propyl cellulose, magnesium stearate, microcrystalline cellulose and lactose monohydrate. The white film-coating contains hypromellose, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "45963-686-02",
"PackageDescription": "1 KIT in 1 PACKAGE, COMBINATION (45963-686-02) * 10 mL in 1 VIAL, SINGLE-DOSE (45963-687-49) * 10 mL in 1 VIAL, SINGLE-USE (45963-688-57) ",
"NDC11Code": "45963-0686-02",
"ProductNDC": "45963-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Melphalan Hydrochloride",
"NonProprietaryName": "Melphalan Hydrochloride",
"DosageFormName": "KIT",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170113",
"EndMarketingDate": "20260430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206018",
"LabelerName": "Actavis Pharma, Inc.",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170113",
"EndMarketingDatePackage": "20260430",
"SamplePackage": "N",
"IndicationAndUsage": "Melphalan Hydrochloride for Injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.",
"Description": "Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of ~2.5. Melphalan Hydrochloride for Injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single-dose vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone K12. Melphalan Hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6 mL, dehydrated alcohol 0.51 mL, and Water for Injection to a total of 10 mL. Melphalan Hydrochloride for Injection is administered intravenously."
},
{
"NDCCode": "47335-686-08",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (47335-686-08) ",
"NDC11Code": "47335-0686-08",
"ProductNDC": "47335-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20191204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091157",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191204",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water and slightly soluble in methanol. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35.Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, USP, along with lactose monohydrate and talc as inactive ingredients. The capsule shells contain gelatin, iron oxide black (200 mg and 225 mg), iron oxide red (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) sodium lauryl sulfate and titanium dioxide. The imprinting black ink contains black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "47335-686-18",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (47335-686-18) ",
"NDC11Code": "47335-0686-18",
"ProductNDC": "47335-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20191204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091157",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191204",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water and slightly soluble in methanol. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35.Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, USP, along with lactose monohydrate and talc as inactive ingredients. The capsule shells contain gelatin, iron oxide black (200 mg and 225 mg), iron oxide red (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) sodium lauryl sulfate and titanium dioxide. The imprinting black ink contains black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "47335-686-83",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (47335-686-83) ",
"NDC11Code": "47335-0686-83",
"ProductNDC": "47335-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20191204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091157",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191204",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water and slightly soluble in methanol. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35.Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, USP, along with lactose monohydrate and talc as inactive ingredients. The capsule shells contain gelatin, iron oxide black (200 mg and 225 mg), iron oxide red (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) sodium lauryl sulfate and titanium dioxide. The imprinting black ink contains black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "47335-686-88",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (47335-686-88) ",
"NDC11Code": "47335-0686-88",
"ProductNDC": "47335-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20191204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091157",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2024-01-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191204",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water and slightly soluble in methanol. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35.Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, USP, along with lactose monohydrate and talc as inactive ingredients. The capsule shells contain gelatin, iron oxide black (200 mg and 225 mg), iron oxide red (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) sodium lauryl sulfate and titanium dioxide. The imprinting black ink contains black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "63739-686-10",
"PackageDescription": "10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-686-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "63739-0686-10",
"ProductNDC": "63739-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium",
"NonProprietaryName": "Losartan Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101004",
"EndMarketingDate": "20251231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078243",
"LabelerName": "Mckesson Corporation DBA SKY Packaginng",
"SubstanceName": "LOSARTAN POTASSIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20101004",
"EndMarketingDatePackage": "20251231",
"SamplePackage": "N",
"IndicationAndUsage": "Losartan potassium tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. ( 1.2) , 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. ( 1.3) .",
"Description": "Losartan potassium is an angiotensin II receptor blocker acting on the AT 1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[ p-( o-1 H tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its molecular formula is C 22H 22ClKN 6O, and its structural formula is:. Losartan potassium, USP is white to off-white powder with a molecular weight of 461.01. It is freely soluble in water; soluble in isopropyl alcohol; slightly soluble in acetonitrile. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium tablets, USP 25 mg, 50 mg and 100 mg contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively. Each losartan potassium tablet, USP intended for oral administration contains 25 mg or 50 mg or 100 mg of losartan potassium. In addition, each tablet contains the following inactive ingredients: colloidal silica anhydrous, hydroxypropyl cellulose (low substituted), hypromellose, lactose monohydrate, magnesium stearate, maize starch (corn starch), microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide."
},
{
"NDCCode": "68462-686-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (68462-686-01) ",
"NDC11Code": "68462-0686-01",
"ProductNDC": "68462-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tacrolimus",
"NonProprietaryName": "Tacrolimus",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206662",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "TACROLIMUS",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201110",
"SamplePackage": "N",
"IndicationAndUsage": "Tacrolimus capsules are a calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric patients receiving allogeneic liver, kidney or heart transplants in combination with other immunosuppressants. (1.1).",
"Description": "Tacrolimus, USP previously known as FK506, is the active ingredient in Tacrolimus Capsules, USP. Tacrolimus, USP is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus, USP is designated as (-)-(3S,4R,5S,8R,9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4-hydroxy-3-methoxy cyclohexyl]-1-methylvinyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone,monohydrate. The chemical structure of tacrolimus, USP is. Tacrolimus, USP has an empirical formula of C44H69NO12H2O and a formula weight of 822.03 g/mol. Tacrolimus, USP appears as white to off-white powder. It is soluble in acetone, chloroform and ethyl acetate; insoluble in water. Tacrolimus Capsules, USP are available for oral administration as capsules containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus, USP. Inactive ingredients include croscarmellose sodium, hypromellose, lactose monohydrate, and magnesium stearate. The 0.5 mg capsule shell contains D&C Yellow 10, FD&C Red 40, FD&C Blue 1, gelatin, shellac, sodium hydroxide, povidone and titanium dioxide. The 1 mg capsule shell contains FD&C Red 40, gelatin, shellac, sodium hydroxide, povidone and titanium dioxide. The 5 mg capsule shell contains gelatin, D&C Yellow 10, FD&C Blue 1, FD&C Red 40, potassium hydroxide, shellac and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "68462-686-14",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68462-686-14) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "68462-0686-14",
"ProductNDC": "68462-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tacrolimus",
"NonProprietaryName": "Tacrolimus",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20201110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206662",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "TACROLIMUS",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201110",
"SamplePackage": "N",
"IndicationAndUsage": "Tacrolimus capsules are a calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric patients receiving allogeneic liver, kidney or heart transplants in combination with other immunosuppressants. (1.1).",
"Description": "Tacrolimus, USP previously known as FK506, is the active ingredient in Tacrolimus Capsules, USP. Tacrolimus, USP is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus, USP is designated as (-)-(3S,4R,5S,8R,9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4-hydroxy-3-methoxy cyclohexyl]-1-methylvinyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone,monohydrate. The chemical structure of tacrolimus, USP is. Tacrolimus, USP has an empirical formula of C44H69NO12H2O and a formula weight of 822.03 g/mol. Tacrolimus, USP appears as white to off-white powder. It is soluble in acetone, chloroform and ethyl acetate; insoluble in water. Tacrolimus Capsules, USP are available for oral administration as capsules containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus, USP. Inactive ingredients include croscarmellose sodium, hypromellose, lactose monohydrate, and magnesium stearate. The 0.5 mg capsule shell contains D&C Yellow 10, FD&C Red 40, FD&C Blue 1, gelatin, shellac, sodium hydroxide, povidone and titanium dioxide. The 1 mg capsule shell contains FD&C Red 40, gelatin, shellac, sodium hydroxide, povidone and titanium dioxide. The 5 mg capsule shell contains gelatin, D&C Yellow 10, FD&C Blue 1, FD&C Red 40, potassium hydroxide, shellac and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "70069-686-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (70069-686-01) / 5 mL in 1 BOTTLE",
"NDC11Code": "70069-0686-01",
"ProductNDC": "70069-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ofloxacin",
"NonProprietaryName": "Ofloxacin",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "AURICULAR (OTIC)",
"StartMarketingDate": "20241031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216328",
"LabelerName": "Somerset Therapeutics, LLC",
"SubstanceName": "OFLOXACIN",
"StrengthNumber": "3",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Quinolone Antimicrobial [EPC], Quinolones [CS]",
"Status": "Active",
"LastUpdate": "2024-11-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241031",
"SamplePackage": "N",
"IndicationAndUsage": "Ofloxacin otic solution 0.3% is indicated for the treatment of infections caused by susceptible isolates of the designated microorganisms in the specific conditions listed below. Otitis Externa in adults and pediatric patients, 6 months and older, due to Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus. Chronic Suppurative Otitis Media in patients 12 years and older with perforated tympanic membranes due to, Proteus mirabilis, Pseudomonas aeruginosa, and Staphylococcus aureus. Acute Otitis Media in pediatric patients one year and older with tympanostomy tubes due to Haemophilus influenzae, Moraxella catarrhalis, Pseudomonas aeruginosa, Staphylococcus aureus, and Streptococcus pneumoniae.",
"Description": "Ofloxacin otic solution 0.3% is a sterile aqueous anti-infective (anti-bacterial) solution for otic use. Chemically, ofloxacin has three condensed 6-membered rings made up of a fluorinated carboxyquinolone with a benzoxazine ring. The chemical name of ofloxacin is: (±)-9- fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid. The empirical formula of ofloxacin is C18H20FN3O4 and its molecular weight is 361.38. The structural formula is. Ofloxacin otic contains 0.3% (3mg/mL) ofloxacin with benzalkonium chloride (0.0025%), sodium chloride (0.9%), and water for injection. Hydrochloric acid and sodium hydroxide are added to adjust the pH between 6.0 and 6.6."
},
{
"NDCCode": "70756-686-10",
"PackageDescription": "10 VIAL in 1 CARTON (70756-686-10) / 10 mL in 1 VIAL (70756-686-86) ",
"NDC11Code": "70756-0686-10",
"ProductNDC": "70756-686",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nicardipine Hydrochloride",
"NonProprietaryName": "Nicardipine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090671",
"LabelerName": "Lifestar Pharma LLC",
"SubstanceName": "NICARDIPINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260224",
"SamplePackage": "N",
"IndicationAndUsage": "Nicardipine hydrochloride injection, USP is a calcium channel blocker indicated for the short-term treatment of hypertension in adults when oral therapy is not feasible. (1.1).",
"Description": "Nicardipine hydrochloride injection, USP is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride injection, USP for intravenous administration contains 2.5 mg/mL of nicardipine hydrochloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure. Nicardipine hydrochloride is a Pale greenish yellow, crystalline powder that melts at about 184°C to 189°C. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. Nicardipine hydrochloride injection, USP is available as a sterile, non-pyrogenic, clear, yellow solution in 10 mL vials for intravenous infusion after dilution. Each mL contains 2.5 mg nicardipine hydrochloride USP in Water for Injection, USP with 48 mg Sorbitol, NF, buffered to pH 3.5 with 0.525 mg citric acid monohydrate, USP and 0.09 mg sodium hydroxide, NF. Additional citric acid and/or sodium hydroxide may have been added to adjust pH."
},
{
"NDCCode": "50090-0001-0",
"PackageDescription": "12 BLISTER PACK in 1 CARTON (50090-0001-0) / 1 SUPPOSITORY in 1 BLISTER PACK",
"NDC11Code": "50090-0001-00",
"ProductNDC": "50090-0001",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Acetaminophen",
"ProprietaryNameSuffix": "For Children",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "SUPPOSITORY",
"RouteName": "RECTAL",
"StartMarketingDate": "20101214",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070607",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily : 1 reduces fever , 2 relieves minor aches, pains, and headache."
},
{
"NDCCode": "50090-0002-0",
"PackageDescription": "1000 TABLET in 1 BOTTLE (50090-0002-0) ",
"NDC11Code": "50090-0002-00",
"ProductNDC": "50090-0002",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pharbest Regular Strength Aspirin",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070112",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part343",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "325",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20181023",
"SamplePackage": "N"
},
{
"NDCCode": "50090-0004-0",
"PackageDescription": "15 TABLET, DELAYED RELEASE in 1 BOTTLE (50090-0004-0) ",
"NDC11Code": "50090-0004-00",
"ProductNDC": "50090-0004",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pharbest Aspirin 325mg",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20100920",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part343",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "325",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-04-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20141201",
"SamplePackage": "N"
},
{
"NDCCode": "50090-0005-0",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (50090-0005-0) / 24 TABLET, FILM COATED in 1 BOTTLE, PLASTIC",
"NDC11Code": "50090-0005-00",
"ProductNDC": "50090-0005",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Tylenol Extra Strength",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19840819",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-05-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to: the common coldheadachebackacheminor pain of arthritistoothachemuscular achespremenstrual and menstrual cramps. temporarily reduces fever."
},
{
"NDCCode": "50090-0007-0",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (50090-0007-0)",
"NDC11Code": "50090-0007-00",
"ProductNDC": "50090-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089805",
"LabelerName": "A-S Medication Solutions LLC",
"SubstanceName": "CODEINE PHOSPHATE; ACETAMINOPHEN",
"StrengthNumber": "30; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2017-01-05"
},
{
"NDCCode": "50090-0009-0",
"PackageDescription": "15 TABLET in 1 BOTTLE, PLASTIC (50090-0009-0)",
"NDC11Code": "50090-0009-00",
"ProductNDC": "50090-0009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089805",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "CODEINE PHOSPHATE; ACETAMINOPHEN",
"StrengthNumber": "30; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-06-08"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>50090-0686-0</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (50090-0686-0)</PackageDescription>
<NDC11Code>50090-0686-00</NDC11Code>
<ProductNDC>50090-0686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonazepam</ProprietaryName>
<NonProprietaryName>Clonazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060628</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077856</ApplicationNumber>
<LabelerName>A-S Medication Solutions LLC</LabelerName>
<SubstanceName>CLONAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2017-10-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>70518-0686-0</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BLISTER PACK (70518-0686-0) </PackageDescription>
<NDC11Code>70518-0686-00</NDC11Code>
<ProductNDC>70518-0686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170816</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202045</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-05-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170816</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-0686-0</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (71335-0686-0) </PackageDescription>
<NDC11Code>71335-0686-00</NDC11Code>
<ProductNDC>71335-0686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208963</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole tablets are indicated for the treatment of: : 1 Vaginal candidiasis (vaginal yeast infections due to Candida)., 2 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia., 3 Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted.</IndicationAndUsage>
<Description>Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C13H12F2N6O and molecular weight of 306.3. The structural formula is. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>50090-0686-1</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (50090-0686-1)</PackageDescription>
<NDC11Code>50090-0686-01</NDC11Code>
<ProductNDC>50090-0686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonazepam</ProprietaryName>
<NonProprietaryName>Clonazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060628</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077856</ApplicationNumber>
<LabelerName>A-S Medication Solutions LLC</LabelerName>
<SubstanceName>CLONAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2017-10-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>50090-0686-2</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (50090-0686-2)</PackageDescription>
<NDC11Code>50090-0686-02</NDC11Code>
<ProductNDC>50090-0686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonazepam</ProprietaryName>
<NonProprietaryName>Clonazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060628</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077856</ApplicationNumber>
<LabelerName>A-S Medication Solutions LLC</LabelerName>
<SubstanceName>CLONAZEPAM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2017-10-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>50090-4537-0</NDCCode>
<PackageDescription>500 mL in 1 CONTAINER (50090-4537-0) </PackageDescription>
<NDC11Code>50090-4537-00</NDC11Code>
<ProductNDC>50090-4537</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium In Dextrose</ProprietaryName>
<NonProprietaryName>Heparin Sodium And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19920720</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019952</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE; HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5; 5000</StrengthNumber>
<StrengthUnit>g/100mL; [USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in 5% Dextrose Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation), 4 Prevention of clotting in arterial and cardiac surgery, 5 Prophylaxis and treatment of peripheral arterial embolism, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 5% Dextrose Injection is a sterile, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) and Hydrous Dextrose USP. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 5.6 (4.5 – 7.0) and the osmolarity mOsmol/L (calc.) is 315. The concentration of electrolytes is 38 mEq/L Sodium, 30 mEq/L Phosphate, and 15 mEq/L Citrate. 40 USP units/mL: Each 100 mL of the 20,000 USP units per 500 mL preparation contains: 4,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>0264-9567-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-9567-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-9567-10</NDC11Code>
<ProductNDC>0264-9567</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium In Dextrose</ProprietaryName>
<NonProprietaryName>Heparin Sodium And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19920720</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019952</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM; DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>4000; 5</StrengthNumber>
<StrengthUnit>[USP'U]/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920720</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in 5% Dextrose Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation), 4 Prevention of clotting in arterial and cardiac surgery, 5 Prophylaxis and treatment of peripheral arterial embolism, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 5% Dextrose Injection is a sterile, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) and Hydrous Dextrose USP. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 5.6 (4.5 – 7.0) and the osmolarity mOsmol/L (calc.) is 315. The concentration of electrolytes is 38 mEq/L Sodium, 30 mEq/L Phosphate, and 15 mEq/L Citrate. 40 USP units/mL: Each 100 mL of the 20,000 USP units per 500 mL preparation contains: 4,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>0264-9577-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-9577-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-9577-10</NDC11Code>
<ProductNDC>0264-9577</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium In Dextrose</ProprietaryName>
<NonProprietaryName>Heparin Sodium And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19920720</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019952</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM; DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>5000; 5</StrengthNumber>
<StrengthUnit>[USP'U]/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920720</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in 5% Dextrose Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation), 4 Prevention of clotting in arterial and cardiac surgery, 5 Prophylaxis and treatment of peripheral arterial embolism, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 5% Dextrose Injection is a sterile, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) and Hydrous Dextrose USP. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 5.6 (4.5 – 7.0) and the osmolarity mOsmol/L (calc.) is 315. The concentration of electrolytes is 38 mEq/L Sodium, 30 mEq/L Phosphate, and 15 mEq/L Citrate. 40 USP units/mL: Each 100 mL of the 20,000 USP units per 500 mL preparation contains: 4,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>0264-9587-20</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-9587-20) / 250 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-9587-20</NDC11Code>
<ProductNDC>0264-9587</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium In Dextrose</ProprietaryName>
<NonProprietaryName>Heparin Sodium And Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19920720</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019952</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM; DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>10000; 5</StrengthNumber>
<StrengthUnit>[USP'U]/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19920720</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in 5% Dextrose Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation), 4 Prevention of clotting in arterial and cardiac surgery, 5 Prophylaxis and treatment of peripheral arterial embolism, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 5% Dextrose Injection is a sterile, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) and Hydrous Dextrose USP. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 5.6 (4.5 – 7.0) and the osmolarity mOsmol/L (calc.) is 315. The concentration of electrolytes is 38 mEq/L Sodium, 30 mEq/L Phosphate, and 15 mEq/L Citrate. 40 USP units/mL: Each 100 mL of the 20,000 USP units per 500 mL preparation contains: 4,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 5 g Hydrous Dextrose USP, 0.41 g Dibasic Sodium Phosphate, 0.093 g Citric Acid Anhydrous USP, 0.0686 g Sodium Metabisulfite NF (antioxidant), and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. It contains no plasticizers and exhibits virtually no leachables. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>0703-0686-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0703-0686-01) > 20 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00703-0686-01</NDC11Code>
<ProductNDC>0703-0686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Treprostinil</ProprietaryName>
<NonProprietaryName>Treprostinil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206648</ApplicationNumber>
<LabelerName>Teva Parenteral Medicines, Inc.</LabelerName>
<SubstanceName>TREPROSTINIL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treprostinil Injection is a prostacyclin mimetic indicated for: 1 Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1), 2 Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).</IndicationAndUsage>
<Description>Treprostinil Injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil Injection is supplied in 20 mL multidose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL, or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contains 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate, and Water for Injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2. Treprostinil is chemically stable at room temperature and neutral pH. Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-. 1H-benz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is.</Description>
</NDC>
<NDC>
<NDCCode>12634-686-04</NDCCode>
<PackageDescription>120 mL in 1 BOTTLE (12634-686-04)</PackageDescription>
<NDC11Code>12634-0686-04</NDC11Code>
<ProductNDC>12634-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisolone</ProprietaryName>
<NonProprietaryName>Prednisolone</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040401</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>PREDNISOLONE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prednisolone Oral Solution is indicated in the following conditions:. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Psoriatic arthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Ankylosing spondylitis. Acute and subacute bursitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus. Bullous dermatitis herpetiformis. Severe erythema multiforme. (Stevens-Johnson syndrome). Exfoliative dermatitis. Mycosis fungoides. Severe psoriasis. Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers. Herpes zoster ophthalmicus. Anterior segment inflammation. Diffuse posterior uveitis and choroiditis. Sympathetic ophthalmia. Allergic conjunctivitis. Keratitis. Chorioretinitis. Optic neuritis. Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis. Loeffler’s syndrome not manageable by other means. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults. Secondary thrombocytopenia in adults. Acquired (autoimmune) hemolytic anemia. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis. Regional enteritis. 12. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement. In addition to the above indications Prednisolone Oral Solution is indicated for systemic dermatomyositis (polymyositis).</IndicationAndUsage>
<Description>Prednisolone Oral Solution contains prednisolone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisolone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; soluble in methanol and in dioxane; sparingly soluble in acetone and in alcohol; slightly soluble in chloroform. The chemical name for Prednisolone is Pregna- 1,4-diene-3,20-dione,11,17,21- trihydroxy-,(11β)- (anhydrous). Prednisolone Oral Solution contains 15 mg of prednisolone in each 5 mL. Benzoic acid, 0.1% is added as a preservative. It also contains alcohol 5%, citric acid, edetate disodium, glycerin, propylene glycol, purified water, sodium saccharin, sucrose, artificial wild cherry flavor, FD&C blue #1 and red #40.</Description>
</NDC>
<NDC>
<NDCCode>21749-686-23</NDCCode>
<PackageDescription>222 mL in 1 PACKAGE (21749-686-23)</PackageDescription>
<NDC11Code>21749-0686-23</NDC11Code>
<ProductNDC>21749-686</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Purell Foodservice Healthy Sp 0.5pct Bak Antimicrobial Foam</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20171015</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>GOJO Industries, Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.005</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-17</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<IndicationAndUsage> Handwash to help decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>21749-686-89</NDCCode>
<PackageDescription>1200 mL in 1 PACKAGE (21749-686-89) </PackageDescription>
<NDC11Code>21749-0686-89</NDC11Code>
<ProductNDC>21749-686</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Purell Foodservice Healthy Sp 0.5pct Bak Antimicrobial Foam</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20171015</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>GOJO Industries, Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>.005</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171015</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> Handwash to help decrease bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>31722-686-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (31722-686-01) </PackageDescription>
<NDC11Code>31722-0686-01</NDC11Code>
<ProductNDC>31722-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220825</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216651</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220825</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine tablets and other treatment options before deciding to use ketorolac tromethamine tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals. Acute Pain in Adult Patients Ketorolac Tromethamine Tablets are indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with IV or IM dosing of ketorolac tromethamine, and Ketorolac Tromethamine Tablets are to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine tablets and ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine tablets therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac tromethamine tablets, USP are a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine, USP is (±)-5-Benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the chemical structure is. Ketorolac tromethamine, USP is a racemic mixture of [-]S and [+]R ketorolac tromethamine, USP. Ketorolac tromethamine, USP may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine, USP has a pKa of 7.8 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.4. Its molecular formula is C 19H 24N 2O 6. Ketorolac tromethamine tablets, USP are available as round, white to off-white, film-coated, bevel edged biconvex tablets. Each tablet contains 10 mg ketorolac tromethamine, USP, the active ingredient, with added hydroxy propyl cellulose, magnesium stearate, microcrystalline cellulose and lactose monohydrate. The white film-coating contains hypromellose, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>45963-686-02</NDCCode>
<PackageDescription>1 KIT in 1 PACKAGE, COMBINATION (45963-686-02) * 10 mL in 1 VIAL, SINGLE-DOSE (45963-687-49) * 10 mL in 1 VIAL, SINGLE-USE (45963-688-57) </PackageDescription>
<NDC11Code>45963-0686-02</NDC11Code>
<ProductNDC>45963-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Melphalan Hydrochloride</ProprietaryName>
<NonProprietaryName>Melphalan Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170113</StartMarketingDate>
<EndMarketingDate>20260430</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206018</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170113</StartMarketingDatePackage>
<EndMarketingDatePackage>20260430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Melphalan Hydrochloride for Injection is indicated for the palliative treatment of patients with multiple myeloma for whom oral therapy is not appropriate.</IndicationAndUsage>
<Description>Melphalan, also known as L-phenylalanine mustard, phenylalanine mustard, L-PAM, or L-sarcolysin, is a phenylalanine derivative of nitrogen mustard. Melphalan is a bifunctional alkylating agent that is active against selected human neoplastic diseases. It is known chemically as 4-[bis(2-chloroethyl)amino]-L-phenylalanine. The molecular formula is C13H18Cl2N2O2 and the molecular weight is 305.20. The structural formula is. Melphalan is the active L-isomer of the compound and was first synthesized in 1953 by Bergel and Stock; the D-isomer, known as medphalan, is less active against certain animal tumors, and the dose needed to produce effects on chromosomes is larger than that required with the L-isomer. The racemic (DL-) form is known as merphalan or sarcolysin. Melphalan is practically insoluble in water and has a pKa1 of ~2.5. Melphalan Hydrochloride for Injection is supplied as a sterile, nonpyrogenic, freeze-dried powder. Each single-dose vial contains melphalan hydrochloride equivalent to 50 mg melphalan and 20 mg povidone K12. Melphalan Hydrochloride for Injection is reconstituted using the sterile diluent provided. Each vial of sterile diluent contains sodium citrate 0.2 g, propylene glycol 6 mL, dehydrated alcohol 0.51 mL, and Water for Injection to a total of 10 mL. Melphalan Hydrochloride for Injection is administered intravenously.</Description>
</NDC>
<NDC>
<NDCCode>47335-686-08</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (47335-686-08) </PackageDescription>
<NDC11Code>47335-0686-08</NDC11Code>
<ProductNDC>47335-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091157</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water and slightly soluble in methanol. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35.Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, USP, along with lactose monohydrate and talc as inactive ingredients. The capsule shells contain gelatin, iron oxide black (200 mg and 225 mg), iron oxide red (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) sodium lauryl sulfate and titanium dioxide. The imprinting black ink contains black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>47335-686-18</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (47335-686-18) </PackageDescription>
<NDC11Code>47335-0686-18</NDC11Code>
<ProductNDC>47335-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091157</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water and slightly soluble in methanol. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35.Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, USP, along with lactose monohydrate and talc as inactive ingredients. The capsule shells contain gelatin, iron oxide black (200 mg and 225 mg), iron oxide red (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) sodium lauryl sulfate and titanium dioxide. The imprinting black ink contains black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>47335-686-83</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (47335-686-83) </PackageDescription>
<NDC11Code>47335-0686-83</NDC11Code>
<ProductNDC>47335-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091157</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water and slightly soluble in methanol. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35.Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, USP, along with lactose monohydrate and talc as inactive ingredients. The capsule shells contain gelatin, iron oxide black (200 mg and 225 mg), iron oxide red (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) sodium lauryl sulfate and titanium dioxide. The imprinting black ink contains black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>47335-686-88</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (47335-686-88) </PackageDescription>
<NDC11Code>47335-0686-88</NDC11Code>
<ProductNDC>47335-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091157</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-01-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is sparingly soluble in water and slightly soluble in methanol. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35.Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, USP, along with lactose monohydrate and talc as inactive ingredients. The capsule shells contain gelatin, iron oxide black (200 mg and 225 mg), iron oxide red (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) sodium lauryl sulfate and titanium dioxide. The imprinting black ink contains black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>63739-686-10</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-686-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63739-0686-10</NDC11Code>
<ProductNDC>63739-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium</ProprietaryName>
<NonProprietaryName>Losartan Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101004</StartMarketingDate>
<EndMarketingDate>20251231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078243</ApplicationNumber>
<LabelerName>Mckesson Corporation DBA SKY Packaginng</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20101004</StartMarketingDatePackage>
<EndMarketingDatePackage>20251231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Losartan potassium tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. ( 1.2) , 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. ( 1.3) .</IndicationAndUsage>
<Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT 1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[ p-( o-1 H tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its molecular formula is C 22H 22ClKN 6O, and its structural formula is:. Losartan potassium, USP is white to off-white powder with a molecular weight of 461.01. It is freely soluble in water; soluble in isopropyl alcohol; slightly soluble in acetonitrile. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium tablets, USP 25 mg, 50 mg and 100 mg contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively. Each losartan potassium tablet, USP intended for oral administration contains 25 mg or 50 mg or 100 mg of losartan potassium. In addition, each tablet contains the following inactive ingredients: colloidal silica anhydrous, hydroxypropyl cellulose (low substituted), hypromellose, lactose monohydrate, magnesium stearate, maize starch (corn starch), microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68462-686-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (68462-686-01) </PackageDescription>
<NDC11Code>68462-0686-01</NDC11Code>
<ProductNDC>68462-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tacrolimus</ProprietaryName>
<NonProprietaryName>Tacrolimus</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206662</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>TACROLIMUS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tacrolimus capsules are a calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric patients receiving allogeneic liver, kidney or heart transplants in combination with other immunosuppressants. (1.1).</IndicationAndUsage>
<Description>Tacrolimus, USP previously known as FK506, is the active ingredient in Tacrolimus Capsules, USP. Tacrolimus, USP is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus, USP is designated as (-)-(3S,4R,5S,8R,9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4-hydroxy-3-methoxy cyclohexyl]-1-methylvinyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone,monohydrate. The chemical structure of tacrolimus, USP is. Tacrolimus, USP has an empirical formula of C44H69NO12H2O and a formula weight of 822.03 g/mol. Tacrolimus, USP appears as white to off-white powder. It is soluble in acetone, chloroform and ethyl acetate; insoluble in water. Tacrolimus Capsules, USP are available for oral administration as capsules containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus, USP. Inactive ingredients include croscarmellose sodium, hypromellose, lactose monohydrate, and magnesium stearate. The 0.5 mg capsule shell contains D&C Yellow 10, FD&C Red 40, FD&C Blue 1, gelatin, shellac, sodium hydroxide, povidone and titanium dioxide. The 1 mg capsule shell contains FD&C Red 40, gelatin, shellac, sodium hydroxide, povidone and titanium dioxide. The 5 mg capsule shell contains gelatin, D&C Yellow 10, FD&C Blue 1, FD&C Red 40, potassium hydroxide, shellac and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>68462-686-14</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68462-686-14) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68462-0686-14</NDC11Code>
<ProductNDC>68462-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tacrolimus</ProprietaryName>
<NonProprietaryName>Tacrolimus</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206662</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>TACROLIMUS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tacrolimus capsules are a calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult and pediatric patients receiving allogeneic liver, kidney or heart transplants in combination with other immunosuppressants. (1.1).</IndicationAndUsage>
<Description>Tacrolimus, USP previously known as FK506, is the active ingredient in Tacrolimus Capsules, USP. Tacrolimus, USP is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus, USP is designated as (-)-(3S,4R,5S,8R,9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4-hydroxy-3-methoxy cyclohexyl]-1-methylvinyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone,monohydrate. The chemical structure of tacrolimus, USP is. Tacrolimus, USP has an empirical formula of C44H69NO12H2O and a formula weight of 822.03 g/mol. Tacrolimus, USP appears as white to off-white powder. It is soluble in acetone, chloroform and ethyl acetate; insoluble in water. Tacrolimus Capsules, USP are available for oral administration as capsules containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus, USP. Inactive ingredients include croscarmellose sodium, hypromellose, lactose monohydrate, and magnesium stearate. The 0.5 mg capsule shell contains D&C Yellow 10, FD&C Red 40, FD&C Blue 1, gelatin, shellac, sodium hydroxide, povidone and titanium dioxide. The 1 mg capsule shell contains FD&C Red 40, gelatin, shellac, sodium hydroxide, povidone and titanium dioxide. The 5 mg capsule shell contains gelatin, D&C Yellow 10, FD&C Blue 1, FD&C Red 40, potassium hydroxide, shellac and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>70069-686-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70069-686-01) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>70069-0686-01</NDC11Code>
<ProductNDC>70069-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ofloxacin</ProprietaryName>
<NonProprietaryName>Ofloxacin</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>AURICULAR (OTIC)</RouteName>
<StartMarketingDate>20241031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216328</ApplicationNumber>
<LabelerName>Somerset Therapeutics, LLC</LabelerName>
<SubstanceName>OFLOXACIN</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC], Quinolones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ofloxacin otic solution 0.3% is indicated for the treatment of infections caused by susceptible isolates of the designated microorganisms in the specific conditions listed below. Otitis Externa in adults and pediatric patients, 6 months and older, due to Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus. Chronic Suppurative Otitis Media in patients 12 years and older with perforated tympanic membranes due to, Proteus mirabilis, Pseudomonas aeruginosa, and Staphylococcus aureus. Acute Otitis Media in pediatric patients one year and older with tympanostomy tubes due to Haemophilus influenzae, Moraxella catarrhalis, Pseudomonas aeruginosa, Staphylococcus aureus, and Streptococcus pneumoniae.</IndicationAndUsage>
<Description>Ofloxacin otic solution 0.3% is a sterile aqueous anti-infective (anti-bacterial) solution for otic use. Chemically, ofloxacin has three condensed 6-membered rings made up of a fluorinated carboxyquinolone with a benzoxazine ring. The chemical name of ofloxacin is: (±)-9- fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido[1,2,3-de]-1,4-benzoxazine-6-carboxylic acid. The empirical formula of ofloxacin is C18H20FN3O4 and its molecular weight is 361.38. The structural formula is. Ofloxacin otic contains 0.3% (3mg/mL) ofloxacin with benzalkonium chloride (0.0025%), sodium chloride (0.9%), and water for injection. Hydrochloric acid and sodium hydroxide are added to adjust the pH between 6.0 and 6.6.</Description>
</NDC>
<NDC>
<NDCCode>70756-686-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (70756-686-10) / 10 mL in 1 VIAL (70756-686-86) </PackageDescription>
<NDC11Code>70756-0686-10</NDC11Code>
<ProductNDC>70756-686</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nicardipine Hydrochloride</ProprietaryName>
<NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090671</ApplicationNumber>
<LabelerName>Lifestar Pharma LLC</LabelerName>
<SubstanceName>NICARDIPINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260224</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nicardipine hydrochloride injection, USP is a calcium channel blocker indicated for the short-term treatment of hypertension in adults when oral therapy is not feasible. (1.1).</IndicationAndUsage>
<Description>Nicardipine hydrochloride injection, USP is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride injection, USP for intravenous administration contains 2.5 mg/mL of nicardipine hydrochloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure. Nicardipine hydrochloride is a Pale greenish yellow, crystalline powder that melts at about 184°C to 189°C. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. Nicardipine hydrochloride injection, USP is available as a sterile, non-pyrogenic, clear, yellow solution in 10 mL vials for intravenous infusion after dilution. Each mL contains 2.5 mg nicardipine hydrochloride USP in Water for Injection, USP with 48 mg Sorbitol, NF, buffered to pH 3.5 with 0.525 mg citric acid monohydrate, USP and 0.09 mg sodium hydroxide, NF. Additional citric acid and/or sodium hydroxide may have been added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>50090-0001-0</NDCCode>
<PackageDescription>12 BLISTER PACK in 1 CARTON (50090-0001-0) / 1 SUPPOSITORY in 1 BLISTER PACK</PackageDescription>
<NDC11Code>50090-0001-00</NDC11Code>
<ProductNDC>50090-0001</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen</ProprietaryName>
<ProprietaryNameSuffix>For Children</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>SUPPOSITORY</DosageFormName>
<RouteName>RECTAL</RouteName>
<StartMarketingDate>20101214</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070607</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily : 1 reduces fever , 2 relieves minor aches, pains, and headache.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50090-0002-0</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (50090-0002-0) </PackageDescription>
<NDC11Code>50090-0002-00</NDC11Code>
<ProductNDC>50090-0002</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pharbest Regular Strength Aspirin</ProprietaryName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070112</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>325</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181023</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-0004-0</NDCCode>
<PackageDescription>15 TABLET, DELAYED RELEASE in 1 BOTTLE (50090-0004-0) </PackageDescription>
<NDC11Code>50090-0004-00</NDC11Code>
<ProductNDC>50090-0004</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pharbest Aspirin 325mg</ProprietaryName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100920</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>325</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-04-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>50090-0005-0</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (50090-0005-0) / 24 TABLET, FILM COATED in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>50090-0005-00</NDC11Code>
<ProductNDC>50090-0005</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Tylenol Extra Strength</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19840819</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-05-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to: the common coldheadachebackacheminor pain of arthritistoothachemuscular achespremenstrual and menstrual cramps. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50090-0007-0</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (50090-0007-0)</PackageDescription>
<NDC11Code>50090-0007-00</NDC11Code>
<ProductNDC>50090-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089805</ApplicationNumber>
<LabelerName>A-S Medication Solutions LLC</LabelerName>
<SubstanceName>CODEINE PHOSPHATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>30; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2017-01-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>50090-0009-0</NDCCode>
<PackageDescription>15 TABLET in 1 BOTTLE, PLASTIC (50090-0009-0)</PackageDescription>
<NDC11Code>50090-0009-00</NDC11Code>
<ProductNDC>50090-0009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089805</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>CODEINE PHOSPHATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>30; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-06-08</LastUpdate>
</NDC>
</NDCList>