{
"NDC": [
{
"NDCCode": "50090-0747-4",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (50090-0747-4) ",
"NDC11Code": "50090-0747-04",
"ProductNDC": "50090-0747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091083",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.",
"Description": "Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red."
},
{
"NDCCode": "0121-0747-10",
"PackageDescription": "4 TRAY in 1 CASE (0121-0747-10) > 10 CUP, UNIT-DOSE in 1 TRAY > 10 mL in 1 CUP, UNIT-DOSE",
"NDC11Code": "00121-0747-10",
"ProductNDC": "0121-0747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sucralfate",
"NonProprietaryName": "Sucralfate",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20091119",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019183",
"LabelerName": "Pharmaceutical Associates, Inc.",
"SubstanceName": "SUCRALFATE",
"StrengthNumber": "1",
"StrengthUnit": "g/10mL",
"Pharm_Classes": "Aluminum Complex [EPC],Organometallic Compounds [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-05-02"
},
{
"NDCCode": "0121-0747-40",
"PackageDescription": "4 TRAY in 1 CASE (0121-0747-40) / 10 CUP, UNIT-DOSE in 1 TRAY / 10 mL in 1 CUP, UNIT-DOSE (0121-0747-10) ",
"NDC11Code": "00121-0747-40",
"ProductNDC": "0121-0747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sucralfate",
"NonProprietaryName": "Sucralfate",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20091119",
"EndMarketingDate": "20230630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019183",
"LabelerName": "Pharmaceutical Associates, Inc.",
"SubstanceName": "SUCRALFATE",
"StrengthNumber": "1",
"StrengthUnit": "g/10mL",
"Pharm_Classes": "Aluminum Complex [EPC], Organometallic Compounds [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200428",
"EndMarketingDatePackage": "20230630",
"SamplePackage": "N"
},
{
"NDCCode": "37662-0747-4",
"PackageDescription": "10000 PELLET in 1 BOTTLE, GLASS (37662-0747-4) ",
"NDC11Code": "37662-0747-04",
"ProductNDC": "37662-0747",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Foeniculum Vulgare",
"NonProprietaryName": "Foeniculum Vulgare",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220706",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "GRATIOLA OFFICINALIS",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2022-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220706",
"SamplePackage": "N"
},
{
"NDCCode": "43596-0747-1",
"PackageDescription": "4 g in 1 CARTON (43596-0747-1) ",
"NDC11Code": "43596-0747-01",
"ProductNDC": "43596-0747",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ultra Balm Moisturizing Protective Lips Spf 20 Rose Paradise",
"NonProprietaryName": "Octinoxate, Zinc Oxide",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200228",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "OCTINOXATE; ZINC OXIDE",
"StrengthNumber": "7.5; 4.9",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200228",
"SamplePackage": "N",
"IndicationAndUsage": "Stop use and ask a doctor if rash occurs."
},
{
"NDCCode": "71335-0747-4",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (71335-0747-4) ",
"NDC11Code": "71335-0747-04",
"ProductNDC": "71335-0747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Indomethacin",
"NonProprietaryName": "Indomethacin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091240",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "INDOMETHACIN",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180411",
"SamplePackage": "N",
"IndicationAndUsage": "Indomethacin Capsules are indicated for: Moderate to severe rheumatoid arthritis including acute flares of chronic disease Moderate to severe ankylosing spondylitis Moderate to severe osteoarthritis Acute painful shoulder (bursitis and/or tendinitis) Acute gouty arthritis.",
"Description": "Indomethacin Capsules, USP are nonsteroidal anti-inflammatory drugs, available as capsules containing 25 mg or 50 mg of indomethacin USP, administered for oral use. The chemical name is 1-(4-chlorobenzoyl)-5-methoxy-2-methyl-1H-indole-3-acetic acid. The molecular weight is 357.79. Its molecular formula is C19H16ClNO4, and it has the following chemical structure. Indomethacin USP is a white to yellow crystalline powder. It is practically insoluble in water and sparingly soluble in alcohol, in chloroform and in ether. It has a pKa of 4.5 and is stable in neutral or slightly acidic media and decomposes in strong alkali. The inactive ingredients in indomethacin capsules 25 mg or 50 mg include: lactose monohydrate, sodium lauryl sulfate, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate. The hard gelatin shell consists of gelatin, titanium dioxide, FD & C Blue 1, D & C Yellow 10. The capsules are printed with black ink containing black iron oxide E172 dye."
},
{
"NDCCode": "50090-0747-0",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (50090-0747-0) ",
"NDC11Code": "50090-0747-00",
"ProductNDC": "50090-0747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091083",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.",
"Description": "Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red."
},
{
"NDCCode": "50090-0747-2",
"PackageDescription": "28 TABLET, FILM COATED in 1 BOTTLE (50090-0747-2) ",
"NDC11Code": "50090-0747-02",
"ProductNDC": "50090-0747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091083",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.",
"Description": "Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red."
},
{
"NDCCode": "50090-0747-5",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (50090-0747-5) ",
"NDC11Code": "50090-0747-05",
"ProductNDC": "50090-0747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091083",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.",
"Description": "Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red."
},
{
"NDCCode": "50090-0747-7",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (50090-0747-7) ",
"NDC11Code": "50090-0747-07",
"ProductNDC": "50090-0747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091083",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.",
"Description": "Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red."
},
{
"NDCCode": "50090-0747-8",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (50090-0747-8) ",
"NDC11Code": "50090-0747-08",
"ProductNDC": "50090-0747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110613",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091083",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190708",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.",
"Description": "Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red."
},
{
"NDCCode": "10237-747-32",
"PackageDescription": "1 TUBE in 1 CARTON (10237-747-32) > 9.4 g in 1 TUBE",
"NDC11Code": "10237-0747-32",
"ProductNDC": "10237-747",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Orajel Instant Pain Relief",
"ProprietaryNameSuffix": "Severe",
"NonProprietaryName": "Benzocaine 20%, Menthol, Benzalkonium Chloride",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170227",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part356",
"LabelerName": "Church Dwight Co., Inc.",
"SubstanceName": "BENZOCAINE; BENZALKONIUM CHLORIDE; MENTHOL",
"StrengthNumber": "200; 1; 25",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "for the temporary relief of pain due to toothaches. to help protect against infection in minor oral irritation."
},
{
"NDCCode": "10237-747-33",
"PackageDescription": "1 TUBE in 1 CARTON (10237-747-33) > 9.4 g in 1 TUBE",
"NDC11Code": "10237-0747-33",
"ProductNDC": "10237-747",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Orajel Instant Pain Relief",
"ProprietaryNameSuffix": "Severe",
"NonProprietaryName": "Benzocaine 20%, Menthol, Benzalkonium Chloride",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20131201",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part356",
"LabelerName": "Church Dwight Co., Inc.",
"SubstanceName": "BENZOCAINE; BENZALKONIUM CHLORIDE; MENTHOL",
"StrengthNumber": "200; 1; 25",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2017-03-03"
},
{
"NDCCode": "11344-747-43",
"PackageDescription": "473 mL in 1 BOTTLE, PLASTIC (11344-747-43) ",
"NDC11Code": "11344-0747-43",
"ProductNDC": "11344-747",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aloe Vera Gel",
"NonProprietaryName": "Lidocaine Hcl, Menthol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170324",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Vi-Jon, LLC",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; MENTHOL",
"StrengthNumber": "7; 2",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-02-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170324",
"SamplePackage": "N",
"IndicationAndUsage": "for the temporary relief of pain and itching associated with: 1 minor burns, 2 sunburn, 3 minor cuts, 4 scrapes, 5 insect bites, 6 minor skin irritations."
},
{
"NDCCode": "13668-747-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (13668-747-05) ",
"NDC11Code": "13668-0747-05",
"ProductNDC": "13668-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "13668-747-33",
"PackageDescription": "180 TABLET in 1 BOTTLE (13668-747-33) ",
"NDC11Code": "13668-0747-33",
"ProductNDC": "13668-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "13668-747-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (13668-747-60) ",
"NDC11Code": "13668-0747-60",
"ProductNDC": "13668-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "13668-747-74",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (13668-747-74) / 10 TABLET in 1 BLISTER PACK (13668-747-71) ",
"NDC11Code": "13668-0747-74",
"ProductNDC": "13668-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213604",
"LabelerName": "Torrent Pharmaceuticals Limited",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250716",
"SamplePackage": "N",
"IndicationAndUsage": "Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).",
"Description": "Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red."
},
{
"NDCCode": "14141-747-01",
"PackageDescription": "4 g in 1 CARTON (14141-747-01) ",
"NDC11Code": "14141-0747-01",
"ProductNDC": "14141-747",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ultra Balm Moisturizing Protective Lips Spf 20 Rose Paradise",
"NonProprietaryName": "Octinoxate, Zinc Oxide",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200228",
"EndMarketingDate": "20231105",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "BEL STAR S A",
"SubstanceName": "OCTINOXATE; ZINC OXIDE",
"StrengthNumber": "7.5; 4.9",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2023-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200228",
"EndMarketingDatePackage": "20231105",
"SamplePackage": "N"
},
{
"NDCCode": "16590-747-30",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-747-30)",
"NDC11Code": "16590-0747-30",
"ProductNDC": "16590-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Opana",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20060622",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021610",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "OPANA ER is indicated for the relief of moderate to severe pain in patients requiring continuous, around-the-clock opioid treatment for an extended period of time. OPANA ER is not intended for use as a prn analgesic. OPANA ER is not indicated for pain in the immediate post-operative period (12-24 hours following surgery) for patients not previously taking opioids because of the risk of oversedation and respiratory depression requiring reversal with opioid antagonists. OPANA ER is not indicated for pain in the post-operative period if the pain is mild or not expected to persist for an extended period of time.",
"Description": "OPANA ER (oxymorphone hydrochloride) extended-release, is a semi-synthetic opioid analgesic supplied in 5 mg, 10 mg, 20 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: hypromellose, iron oxide black, methylparaben, propylene glycol, silicified microcrystalline cellulose, sodium stearyl fumarate, TIMERx® -N, titanium dioxide, and triacetin. The 5 mg, 10 mg and 20 mg tablets also contain macrogol, and polysorbate 80. In addition, the 5 mg tablets contain iron oxide red. The 10 mg tablets contain FD and C yellow No. 6. The 20 mg tablets contain FD and C blue No. 1, FD and C yellow No. 6, and D and C yellow No. 10. The 40 mg tablets contain FD and C yellow No. 6, D and C yellow No. 10, and lactose monohydrate. Chemically, oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. The tablet strengths, 5, 10, 20 and 40 mg, describe the amount of oxymorphone hydrochloride per tablet."
},
{
"NDCCode": "16590-747-56",
"PackageDescription": "56 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-747-56)",
"NDC11Code": "16590-0747-56",
"ProductNDC": "16590-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Opana",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20060622",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021610",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "OPANA ER is indicated for the relief of moderate to severe pain in patients requiring continuous, around-the-clock opioid treatment for an extended period of time. OPANA ER is not intended for use as a prn analgesic. OPANA ER is not indicated for pain in the immediate post-operative period (12-24 hours following surgery) for patients not previously taking opioids because of the risk of oversedation and respiratory depression requiring reversal with opioid antagonists. OPANA ER is not indicated for pain in the post-operative period if the pain is mild or not expected to persist for an extended period of time.",
"Description": "OPANA ER (oxymorphone hydrochloride) extended-release, is a semi-synthetic opioid analgesic supplied in 5 mg, 10 mg, 20 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: hypromellose, iron oxide black, methylparaben, propylene glycol, silicified microcrystalline cellulose, sodium stearyl fumarate, TIMERx® -N, titanium dioxide, and triacetin. The 5 mg, 10 mg and 20 mg tablets also contain macrogol, and polysorbate 80. In addition, the 5 mg tablets contain iron oxide red. The 10 mg tablets contain FD and C yellow No. 6. The 20 mg tablets contain FD and C blue No. 1, FD and C yellow No. 6, and D and C yellow No. 10. The 40 mg tablets contain FD and C yellow No. 6, D and C yellow No. 10, and lactose monohydrate. Chemically, oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. The tablet strengths, 5, 10, 20 and 40 mg, describe the amount of oxymorphone hydrochloride per tablet."
},
{
"NDCCode": "16590-747-60",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-747-60)",
"NDC11Code": "16590-0747-60",
"ProductNDC": "16590-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Opana",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20060622",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021610",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "OPANA ER is indicated for the relief of moderate to severe pain in patients requiring continuous, around-the-clock opioid treatment for an extended period of time. OPANA ER is not intended for use as a prn analgesic. OPANA ER is not indicated for pain in the immediate post-operative period (12-24 hours following surgery) for patients not previously taking opioids because of the risk of oversedation and respiratory depression requiring reversal with opioid antagonists. OPANA ER is not indicated for pain in the post-operative period if the pain is mild or not expected to persist for an extended period of time.",
"Description": "OPANA ER (oxymorphone hydrochloride) extended-release, is a semi-synthetic opioid analgesic supplied in 5 mg, 10 mg, 20 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: hypromellose, iron oxide black, methylparaben, propylene glycol, silicified microcrystalline cellulose, sodium stearyl fumarate, TIMERx® -N, titanium dioxide, and triacetin. The 5 mg, 10 mg and 20 mg tablets also contain macrogol, and polysorbate 80. In addition, the 5 mg tablets contain iron oxide red. The 10 mg tablets contain FD and C yellow No. 6. The 20 mg tablets contain FD and C blue No. 1, FD and C yellow No. 6, and D and C yellow No. 10. The 40 mg tablets contain FD and C yellow No. 6, D and C yellow No. 10, and lactose monohydrate. Chemically, oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. The tablet strengths, 5, 10, 20 and 40 mg, describe the amount of oxymorphone hydrochloride per tablet."
},
{
"NDCCode": "16590-747-90",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-747-90)",
"NDC11Code": "16590-0747-90",
"ProductNDC": "16590-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Opana",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20060622",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021610",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "OPANA ER is indicated for the relief of moderate to severe pain in patients requiring continuous, around-the-clock opioid treatment for an extended period of time. OPANA ER is not intended for use as a prn analgesic. OPANA ER is not indicated for pain in the immediate post-operative period (12-24 hours following surgery) for patients not previously taking opioids because of the risk of oversedation and respiratory depression requiring reversal with opioid antagonists. OPANA ER is not indicated for pain in the post-operative period if the pain is mild or not expected to persist for an extended period of time.",
"Description": "OPANA ER (oxymorphone hydrochloride) extended-release, is a semi-synthetic opioid analgesic supplied in 5 mg, 10 mg, 20 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: hypromellose, iron oxide black, methylparaben, propylene glycol, silicified microcrystalline cellulose, sodium stearyl fumarate, TIMERx® -N, titanium dioxide, and triacetin. The 5 mg, 10 mg and 20 mg tablets also contain macrogol, and polysorbate 80. In addition, the 5 mg tablets contain iron oxide red. The 10 mg tablets contain FD and C yellow No. 6. The 20 mg tablets contain FD and C blue No. 1, FD and C yellow No. 6, and D and C yellow No. 10. The 40 mg tablets contain FD and C yellow No. 6, D and C yellow No. 10, and lactose monohydrate. Chemically, oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. The tablet strengths, 5, 10, 20 and 40 mg, describe the amount of oxymorphone hydrochloride per tablet."
},
{
"NDCCode": "21695-747-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (21695-747-30)",
"NDC11Code": "21695-0747-30",
"ProductNDC": "21695-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20051006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077091",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea [EPC],Sulfonylurea Compounds [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (See DOSAGE AND ADMINISTRATION section).",
"Description": "Glimepiride tablets USP, are an oral blood-glucose-lowering drug of the sulfonylurea class. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder formulated into tablets of 1 mg, 2 mg, and 4 mg strengths for oral administration. Glimepiride tablets contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. In addition, glimepiride 1 mg tablets contain ferric oxide red, glimepiride 2 mg tablets contain lake blend green (contains D&C yellow # 10 aluminium lake and FD&C blue #1/ brilliant blue FCF aluminium lake) and glimepiride 4 mg tablets contain lake blend blue (contains D&C yellow # 10 aluminium lake and FD&C blue # 1/ brilliant blue FCF aluminium lake). Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1- carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea. The CAS Registry Number is 93479-97-1. The structural formula is. Molecular Formula: C24H34N4O5S. Molecular Weight: 490.62. Glimepiride is practically insoluble in water."
},
{
"NDCCode": "21695-747-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (21695-747-60)",
"NDC11Code": "21695-0747-60",
"ProductNDC": "21695-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20051006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077091",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea [EPC],Sulfonylurea Compounds [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (See DOSAGE AND ADMINISTRATION section).",
"Description": "Glimepiride tablets USP, are an oral blood-glucose-lowering drug of the sulfonylurea class. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder formulated into tablets of 1 mg, 2 mg, and 4 mg strengths for oral administration. Glimepiride tablets contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. In addition, glimepiride 1 mg tablets contain ferric oxide red, glimepiride 2 mg tablets contain lake blend green (contains D&C yellow # 10 aluminium lake and FD&C blue #1/ brilliant blue FCF aluminium lake) and glimepiride 4 mg tablets contain lake blend blue (contains D&C yellow # 10 aluminium lake and FD&C blue # 1/ brilliant blue FCF aluminium lake). Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1- carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea. The CAS Registry Number is 93479-97-1. The structural formula is. Molecular Formula: C24H34N4O5S. Molecular Weight: 490.62. Glimepiride is practically insoluble in water."
},
{
"NDCCode": "21695-747-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (21695-747-90)",
"NDC11Code": "21695-0747-90",
"ProductNDC": "21695-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20051006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077091",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea [EPC],Sulfonylurea Compounds [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (See DOSAGE AND ADMINISTRATION section).",
"Description": "Glimepiride tablets USP, are an oral blood-glucose-lowering drug of the sulfonylurea class. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder formulated into tablets of 1 mg, 2 mg, and 4 mg strengths for oral administration. Glimepiride tablets contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. In addition, glimepiride 1 mg tablets contain ferric oxide red, glimepiride 2 mg tablets contain lake blend green (contains D&C yellow # 10 aluminium lake and FD&C blue #1/ brilliant blue FCF aluminium lake) and glimepiride 4 mg tablets contain lake blend blue (contains D&C yellow # 10 aluminium lake and FD&C blue # 1/ brilliant blue FCF aluminium lake). Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1- carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea. The CAS Registry Number is 93479-97-1. The structural formula is. Molecular Formula: C24H34N4O5S. Molecular Weight: 490.62. Glimepiride is practically insoluble in water."
},
{
"NDCCode": "30142-747-43",
"PackageDescription": "473 mL in 1 BOTTLE, PLASTIC (30142-747-43) ",
"NDC11Code": "30142-0747-43",
"ProductNDC": "30142-747",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aloe Vera Gel",
"NonProprietaryName": "Lidocaine Hcl, Menthol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20211124",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "The Kroger Co",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; MENTHOL",
"StrengthNumber": "7; 2",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20211124",
"SamplePackage": "N",
"IndicationAndUsage": "for the temporary relief of pain and itching associated with: 1 minor burns, 2 sunburn, 3 minor cuts, 4 scrapes, 5 insect bites, 6 minor skin irritations."
},
{
"NDCCode": "31722-747-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (31722-747-05) ",
"NDC11Code": "31722-0747-05",
"ProductNDC": "31722-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203311",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "160",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150105",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan tablet is an angiotensin II receptor blocker (ARB) indicated for: Treatment of hypertension,to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Treatment of heart failure (NYHA class II to IV);valsartan tablets significantly reduced hospitalization for heart failure ( 1.2) Post-myocardial infarction:for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infrarction ( 1.3).",
"Description": "Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan, USP is chemically described as L-valine, N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-. Its empirical formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2."
},
{
"NDCCode": "31722-747-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (31722-747-30) ",
"NDC11Code": "31722-0747-30",
"ProductNDC": "31722-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203311",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "160",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150105",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan tablet is an angiotensin II receptor blocker (ARB) indicated for: Treatment of hypertension,to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Treatment of heart failure (NYHA class II to IV);valsartan tablets significantly reduced hospitalization for heart failure ( 1.2) Post-myocardial infarction:for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infrarction ( 1.3).",
"Description": "Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan, USP is chemically described as L-valine, N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-. Its empirical formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2."
},
{
"NDCCode": "31722-747-31",
"PackageDescription": "10 TABLET, FILM COATED in 1 BLISTER PACK (31722-747-31) ",
"NDC11Code": "31722-0747-31",
"ProductNDC": "31722-747",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan",
"NonProprietaryName": "Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203311",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "VALSARTAN",
"StrengthNumber": "160",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150105",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan tablet is an angiotensin II receptor blocker (ARB) indicated for: Treatment of hypertension,to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Treatment of heart failure (NYHA class II to IV);valsartan tablets significantly reduced hospitalization for heart failure ( 1.2) Post-myocardial infarction:for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infrarction ( 1.3).",
"Description": "Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan, USP is chemically described as L-valine, N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-. Its empirical formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>50090-0747-4</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (50090-0747-4) </PackageDescription>
<NDC11Code>50090-0747-04</NDC11Code>
<ProductNDC>50090-0747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091083</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.</IndicationAndUsage>
<Description>Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>0121-0747-10</NDCCode>
<PackageDescription>4 TRAY in 1 CASE (0121-0747-10) > 10 CUP, UNIT-DOSE in 1 TRAY > 10 mL in 1 CUP, UNIT-DOSE</PackageDescription>
<NDC11Code>00121-0747-10</NDC11Code>
<ProductNDC>0121-0747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sucralfate</ProprietaryName>
<NonProprietaryName>Sucralfate</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091119</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019183</ApplicationNumber>
<LabelerName>Pharmaceutical Associates, Inc.</LabelerName>
<SubstanceName>SUCRALFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/10mL</StrengthUnit>
<Pharm_Classes>Aluminum Complex [EPC],Organometallic Compounds [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-05-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0121-0747-40</NDCCode>
<PackageDescription>4 TRAY in 1 CASE (0121-0747-40) / 10 CUP, UNIT-DOSE in 1 TRAY / 10 mL in 1 CUP, UNIT-DOSE (0121-0747-10) </PackageDescription>
<NDC11Code>00121-0747-40</NDC11Code>
<ProductNDC>0121-0747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sucralfate</ProprietaryName>
<NonProprietaryName>Sucralfate</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091119</StartMarketingDate>
<EndMarketingDate>20230630</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019183</ApplicationNumber>
<LabelerName>Pharmaceutical Associates, Inc.</LabelerName>
<SubstanceName>SUCRALFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/10mL</StrengthUnit>
<Pharm_Classes>Aluminum Complex [EPC], Organometallic Compounds [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200428</StartMarketingDatePackage>
<EndMarketingDatePackage>20230630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37662-0747-4</NDCCode>
<PackageDescription>10000 PELLET in 1 BOTTLE, GLASS (37662-0747-4) </PackageDescription>
<NDC11Code>37662-0747-04</NDC11Code>
<ProductNDC>37662-0747</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Foeniculum Vulgare</ProprietaryName>
<NonProprietaryName>Foeniculum Vulgare</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220706</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>GRATIOLA OFFICINALIS</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220706</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43596-0747-1</NDCCode>
<PackageDescription>4 g in 1 CARTON (43596-0747-1) </PackageDescription>
<NDC11Code>43596-0747-01</NDC11Code>
<ProductNDC>43596-0747</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ultra Balm Moisturizing Protective Lips Spf 20 Rose Paradise</ProprietaryName>
<NonProprietaryName>Octinoxate, Zinc Oxide</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200228</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>OCTINOXATE; ZINC OXIDE</SubstanceName>
<StrengthNumber>7.5; 4.9</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Stop use and ask a doctor if rash occurs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-0747-4</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (71335-0747-4) </PackageDescription>
<NDC11Code>71335-0747-04</NDC11Code>
<ProductNDC>71335-0747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Indomethacin</ProprietaryName>
<NonProprietaryName>Indomethacin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091240</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>INDOMETHACIN</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indomethacin Capsules are indicated for: Moderate to severe rheumatoid arthritis including acute flares of chronic disease Moderate to severe ankylosing spondylitis Moderate to severe osteoarthritis Acute painful shoulder (bursitis and/or tendinitis) Acute gouty arthritis.</IndicationAndUsage>
<Description>Indomethacin Capsules, USP are nonsteroidal anti-inflammatory drugs, available as capsules containing 25 mg or 50 mg of indomethacin USP, administered for oral use. The chemical name is 1-(4-chlorobenzoyl)-5-methoxy-2-methyl-1H-indole-3-acetic acid. The molecular weight is 357.79. Its molecular formula is C19H16ClNO4, and it has the following chemical structure. Indomethacin USP is a white to yellow crystalline powder. It is practically insoluble in water and sparingly soluble in alcohol, in chloroform and in ether. It has a pKa of 4.5 and is stable in neutral or slightly acidic media and decomposes in strong alkali. The inactive ingredients in indomethacin capsules 25 mg or 50 mg include: lactose monohydrate, sodium lauryl sulfate, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate. The hard gelatin shell consists of gelatin, titanium dioxide, FD & C Blue 1, D & C Yellow 10. The capsules are printed with black ink containing black iron oxide E172 dye.</Description>
</NDC>
<NDC>
<NDCCode>50090-0747-0</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (50090-0747-0) </PackageDescription>
<NDC11Code>50090-0747-00</NDC11Code>
<ProductNDC>50090-0747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091083</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.</IndicationAndUsage>
<Description>Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>50090-0747-2</NDCCode>
<PackageDescription>28 TABLET, FILM COATED in 1 BOTTLE (50090-0747-2) </PackageDescription>
<NDC11Code>50090-0747-02</NDC11Code>
<ProductNDC>50090-0747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091083</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.</IndicationAndUsage>
<Description>Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>50090-0747-5</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (50090-0747-5) </PackageDescription>
<NDC11Code>50090-0747-05</NDC11Code>
<ProductNDC>50090-0747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091083</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.</IndicationAndUsage>
<Description>Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>50090-0747-7</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (50090-0747-7) </PackageDescription>
<NDC11Code>50090-0747-07</NDC11Code>
<ProductNDC>50090-0747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091083</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.</IndicationAndUsage>
<Description>Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>50090-0747-8</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50090-0747-8) </PackageDescription>
<NDC11Code>50090-0747-08</NDC11Code>
<ProductNDC>50090-0747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110613</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091083</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190708</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of nabumetone tablets and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.</IndicationAndUsage>
<Description>Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2-naphthalenyl)-2-butanone. It has the following structure:. Nabumetone is a white to off-white crystalline substance. It is nonacidic and practically insoluble in water, but soluble in alcohol and most organic solvents. It has an n-octanol: phosphate buffer partition coefficient of 2,400 at pH 7.4. Each tablet, for oral administration, contains either 500 mg or 750 mg of nabumetone. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, hypromellose, magnesium stearate, povidone, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and triacetin. The 500 mg tablets also contain talc and the 750 mg tablets also contain iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>10237-747-32</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (10237-747-32) > 9.4 g in 1 TUBE</PackageDescription>
<NDC11Code>10237-0747-32</NDC11Code>
<ProductNDC>10237-747</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Orajel Instant Pain Relief</ProprietaryName>
<ProprietaryNameSuffix>Severe</ProprietaryNameSuffix>
<NonProprietaryName>Benzocaine 20%, Menthol, Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170227</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part356</ApplicationNumber>
<LabelerName>Church Dwight Co., Inc.</LabelerName>
<SubstanceName>BENZOCAINE; BENZALKONIUM CHLORIDE; MENTHOL</SubstanceName>
<StrengthNumber>200; 1; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>for the temporary relief of pain due to toothaches. to help protect against infection in minor oral irritation.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10237-747-33</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (10237-747-33) > 9.4 g in 1 TUBE</PackageDescription>
<NDC11Code>10237-0747-33</NDC11Code>
<ProductNDC>10237-747</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Orajel Instant Pain Relief</ProprietaryName>
<ProprietaryNameSuffix>Severe</ProprietaryNameSuffix>
<NonProprietaryName>Benzocaine 20%, Menthol, Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20131201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part356</ApplicationNumber>
<LabelerName>Church Dwight Co., Inc.</LabelerName>
<SubstanceName>BENZOCAINE; BENZALKONIUM CHLORIDE; MENTHOL</SubstanceName>
<StrengthNumber>200; 1; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-03-03</LastUpdate>
</NDC>
<NDC>
<NDCCode>11344-747-43</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE, PLASTIC (11344-747-43) </PackageDescription>
<NDC11Code>11344-0747-43</NDC11Code>
<ProductNDC>11344-747</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aloe Vera Gel</ProprietaryName>
<NonProprietaryName>Lidocaine Hcl, Menthol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170324</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Vi-Jon, LLC</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; MENTHOL</SubstanceName>
<StrengthNumber>7; 2</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the temporary relief of pain and itching associated with: 1 minor burns, 2 sunburn, 3 minor cuts, 4 scrapes, 5 insect bites, 6 minor skin irritations.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13668-747-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (13668-747-05) </PackageDescription>
<NDC11Code>13668-0747-05</NDC11Code>
<ProductNDC>13668-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>13668-747-33</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (13668-747-33) </PackageDescription>
<NDC11Code>13668-0747-33</NDC11Code>
<ProductNDC>13668-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>13668-747-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (13668-747-60) </PackageDescription>
<NDC11Code>13668-0747-60</NDC11Code>
<ProductNDC>13668-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>13668-747-74</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (13668-747-74) / 10 TABLET in 1 BLISTER PACK (13668-747-71) </PackageDescription>
<NDC11Code>13668-0747-74</NDC11Code>
<ProductNDC>13668-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213604</ApplicationNumber>
<LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure. Benefits are most clearly evident in patients with left ventricular ejection fraction (LVEF) below normal. (1.1), 2 for the treatment of symptomatic heart failure with systemic left ventricular systolic dysfunction in pediatric patients aged one year and older. Sacubitril and valsartan tablets reduces NT-proBNP and is expected to improve cardiovascular outcomes. (1.2).</IndicationAndUsage>
<Description>Sacubitril and valsartan is a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan contain anionic forms of sacubitril and valsartan, sodium cations in the molar ratio of 1:1:3, respectively. Following oral administration, Sacubitril and valsartan dissociates into sacubitril (which is further metabolized to LBQ657) and valsartan. The Sacubitril and valsartan is chemically described as Trisodium (4-{[(1S,3R)-1-([1,1'-biphenyl]-4-ylmethyl)-4-ethoxy-3-methyl-4-oxobutyl]amino}-4-oxobutanoate)-(N-pentanoyl-N-{[(2'-(1H-tetrazol-1-id-5-yl)[1,1'-biphenyl]-4-yl]methyl}-L-valinate). Its empirical formula is C48H55N6O8Na3. Its molecular mass is 912.96 g/mol and its schematic structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are crospovidone, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, povidone, silicon dioxide and talc. The film-coat inactive ingredients are hypromellose, macrogol/PEG, talc and titanium dioxide. The film-coat for the 24 mg of sacubitril and 26 mg of valsartan tablet contains iron oxide black and iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>14141-747-01</NDCCode>
<PackageDescription>4 g in 1 CARTON (14141-747-01) </PackageDescription>
<NDC11Code>14141-0747-01</NDC11Code>
<ProductNDC>14141-747</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ultra Balm Moisturizing Protective Lips Spf 20 Rose Paradise</ProprietaryName>
<NonProprietaryName>Octinoxate, Zinc Oxide</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200228</StartMarketingDate>
<EndMarketingDate>20231105</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>BEL STAR S A</LabelerName>
<SubstanceName>OCTINOXATE; ZINC OXIDE</SubstanceName>
<StrengthNumber>7.5; 4.9</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200228</StartMarketingDatePackage>
<EndMarketingDatePackage>20231105</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>16590-747-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-747-30)</PackageDescription>
<NDC11Code>16590-0747-30</NDC11Code>
<ProductNDC>16590-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Opana</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060622</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021610</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>OPANA ER is indicated for the relief of moderate to severe pain in patients requiring continuous, around-the-clock opioid treatment for an extended period of time. OPANA ER is not intended for use as a prn analgesic. OPANA ER is not indicated for pain in the immediate post-operative period (12-24 hours following surgery) for patients not previously taking opioids because of the risk of oversedation and respiratory depression requiring reversal with opioid antagonists. OPANA ER is not indicated for pain in the post-operative period if the pain is mild or not expected to persist for an extended period of time.</IndicationAndUsage>
<Description>OPANA ER (oxymorphone hydrochloride) extended-release, is a semi-synthetic opioid analgesic supplied in 5 mg, 10 mg, 20 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: hypromellose, iron oxide black, methylparaben, propylene glycol, silicified microcrystalline cellulose, sodium stearyl fumarate, TIMERx® -N, titanium dioxide, and triacetin. The 5 mg, 10 mg and 20 mg tablets also contain macrogol, and polysorbate 80. In addition, the 5 mg tablets contain iron oxide red. The 10 mg tablets contain FD and C yellow No. 6. The 20 mg tablets contain FD and C blue No. 1, FD and C yellow No. 6, and D and C yellow No. 10. The 40 mg tablets contain FD and C yellow No. 6, D and C yellow No. 10, and lactose monohydrate. Chemically, oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. The tablet strengths, 5, 10, 20 and 40 mg, describe the amount of oxymorphone hydrochloride per tablet.</Description>
</NDC>
<NDC>
<NDCCode>16590-747-56</NDCCode>
<PackageDescription>56 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-747-56)</PackageDescription>
<NDC11Code>16590-0747-56</NDC11Code>
<ProductNDC>16590-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Opana</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060622</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021610</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>OPANA ER is indicated for the relief of moderate to severe pain in patients requiring continuous, around-the-clock opioid treatment for an extended period of time. OPANA ER is not intended for use as a prn analgesic. OPANA ER is not indicated for pain in the immediate post-operative period (12-24 hours following surgery) for patients not previously taking opioids because of the risk of oversedation and respiratory depression requiring reversal with opioid antagonists. OPANA ER is not indicated for pain in the post-operative period if the pain is mild or not expected to persist for an extended period of time.</IndicationAndUsage>
<Description>OPANA ER (oxymorphone hydrochloride) extended-release, is a semi-synthetic opioid analgesic supplied in 5 mg, 10 mg, 20 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: hypromellose, iron oxide black, methylparaben, propylene glycol, silicified microcrystalline cellulose, sodium stearyl fumarate, TIMERx® -N, titanium dioxide, and triacetin. The 5 mg, 10 mg and 20 mg tablets also contain macrogol, and polysorbate 80. In addition, the 5 mg tablets contain iron oxide red. The 10 mg tablets contain FD and C yellow No. 6. The 20 mg tablets contain FD and C blue No. 1, FD and C yellow No. 6, and D and C yellow No. 10. The 40 mg tablets contain FD and C yellow No. 6, D and C yellow No. 10, and lactose monohydrate. Chemically, oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. The tablet strengths, 5, 10, 20 and 40 mg, describe the amount of oxymorphone hydrochloride per tablet.</Description>
</NDC>
<NDC>
<NDCCode>16590-747-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-747-60)</PackageDescription>
<NDC11Code>16590-0747-60</NDC11Code>
<ProductNDC>16590-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Opana</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060622</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021610</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>OPANA ER is indicated for the relief of moderate to severe pain in patients requiring continuous, around-the-clock opioid treatment for an extended period of time. OPANA ER is not intended for use as a prn analgesic. OPANA ER is not indicated for pain in the immediate post-operative period (12-24 hours following surgery) for patients not previously taking opioids because of the risk of oversedation and respiratory depression requiring reversal with opioid antagonists. OPANA ER is not indicated for pain in the post-operative period if the pain is mild or not expected to persist for an extended period of time.</IndicationAndUsage>
<Description>OPANA ER (oxymorphone hydrochloride) extended-release, is a semi-synthetic opioid analgesic supplied in 5 mg, 10 mg, 20 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: hypromellose, iron oxide black, methylparaben, propylene glycol, silicified microcrystalline cellulose, sodium stearyl fumarate, TIMERx® -N, titanium dioxide, and triacetin. The 5 mg, 10 mg and 20 mg tablets also contain macrogol, and polysorbate 80. In addition, the 5 mg tablets contain iron oxide red. The 10 mg tablets contain FD and C yellow No. 6. The 20 mg tablets contain FD and C blue No. 1, FD and C yellow No. 6, and D and C yellow No. 10. The 40 mg tablets contain FD and C yellow No. 6, D and C yellow No. 10, and lactose monohydrate. Chemically, oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. The tablet strengths, 5, 10, 20 and 40 mg, describe the amount of oxymorphone hydrochloride per tablet.</Description>
</NDC>
<NDC>
<NDCCode>16590-747-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (16590-747-90)</PackageDescription>
<NDC11Code>16590-0747-90</NDC11Code>
<ProductNDC>16590-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Opana</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060622</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021610</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>OPANA ER is indicated for the relief of moderate to severe pain in patients requiring continuous, around-the-clock opioid treatment for an extended period of time. OPANA ER is not intended for use as a prn analgesic. OPANA ER is not indicated for pain in the immediate post-operative period (12-24 hours following surgery) for patients not previously taking opioids because of the risk of oversedation and respiratory depression requiring reversal with opioid antagonists. OPANA ER is not indicated for pain in the post-operative period if the pain is mild or not expected to persist for an extended period of time.</IndicationAndUsage>
<Description>OPANA ER (oxymorphone hydrochloride) extended-release, is a semi-synthetic opioid analgesic supplied in 5 mg, 10 mg, 20 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: hypromellose, iron oxide black, methylparaben, propylene glycol, silicified microcrystalline cellulose, sodium stearyl fumarate, TIMERx® -N, titanium dioxide, and triacetin. The 5 mg, 10 mg and 20 mg tablets also contain macrogol, and polysorbate 80. In addition, the 5 mg tablets contain iron oxide red. The 10 mg tablets contain FD and C yellow No. 6. The 20 mg tablets contain FD and C blue No. 1, FD and C yellow No. 6, and D and C yellow No. 10. The 40 mg tablets contain FD and C yellow No. 6, D and C yellow No. 10, and lactose monohydrate. Chemically, oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. The tablet strengths, 5, 10, 20 and 40 mg, describe the amount of oxymorphone hydrochloride per tablet.</Description>
</NDC>
<NDC>
<NDCCode>21695-747-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (21695-747-30)</PackageDescription>
<NDC11Code>21695-0747-30</NDC11Code>
<ProductNDC>21695-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077091</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea [EPC],Sulfonylurea Compounds [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (See DOSAGE AND ADMINISTRATION section).</IndicationAndUsage>
<Description>Glimepiride tablets USP, are an oral blood-glucose-lowering drug of the sulfonylurea class. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder formulated into tablets of 1 mg, 2 mg, and 4 mg strengths for oral administration. Glimepiride tablets contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. In addition, glimepiride 1 mg tablets contain ferric oxide red, glimepiride 2 mg tablets contain lake blend green (contains D&C yellow # 10 aluminium lake and FD&C blue #1/ brilliant blue FCF aluminium lake) and glimepiride 4 mg tablets contain lake blend blue (contains D&C yellow # 10 aluminium lake and FD&C blue # 1/ brilliant blue FCF aluminium lake). Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1- carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea. The CAS Registry Number is 93479-97-1. The structural formula is. Molecular Formula: C24H34N4O5S. Molecular Weight: 490.62. Glimepiride is practically insoluble in water.</Description>
</NDC>
<NDC>
<NDCCode>21695-747-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (21695-747-60)</PackageDescription>
<NDC11Code>21695-0747-60</NDC11Code>
<ProductNDC>21695-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077091</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea [EPC],Sulfonylurea Compounds [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (See DOSAGE AND ADMINISTRATION section).</IndicationAndUsage>
<Description>Glimepiride tablets USP, are an oral blood-glucose-lowering drug of the sulfonylurea class. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder formulated into tablets of 1 mg, 2 mg, and 4 mg strengths for oral administration. Glimepiride tablets contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. In addition, glimepiride 1 mg tablets contain ferric oxide red, glimepiride 2 mg tablets contain lake blend green (contains D&C yellow # 10 aluminium lake and FD&C blue #1/ brilliant blue FCF aluminium lake) and glimepiride 4 mg tablets contain lake blend blue (contains D&C yellow # 10 aluminium lake and FD&C blue # 1/ brilliant blue FCF aluminium lake). Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1- carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea. The CAS Registry Number is 93479-97-1. The structural formula is. Molecular Formula: C24H34N4O5S. Molecular Weight: 490.62. Glimepiride is practically insoluble in water.</Description>
</NDC>
<NDC>
<NDCCode>21695-747-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (21695-747-90)</PackageDescription>
<NDC11Code>21695-0747-90</NDC11Code>
<ProductNDC>21695-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077091</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea [EPC],Sulfonylurea Compounds [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus. (See DOSAGE AND ADMINISTRATION section).</IndicationAndUsage>
<Description>Glimepiride tablets USP, are an oral blood-glucose-lowering drug of the sulfonylurea class. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder formulated into tablets of 1 mg, 2 mg, and 4 mg strengths for oral administration. Glimepiride tablets contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. In addition, glimepiride 1 mg tablets contain ferric oxide red, glimepiride 2 mg tablets contain lake blend green (contains D&C yellow # 10 aluminium lake and FD&C blue #1/ brilliant blue FCF aluminium lake) and glimepiride 4 mg tablets contain lake blend blue (contains D&C yellow # 10 aluminium lake and FD&C blue # 1/ brilliant blue FCF aluminium lake). Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1- carboxamido)ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea. The CAS Registry Number is 93479-97-1. The structural formula is. Molecular Formula: C24H34N4O5S. Molecular Weight: 490.62. Glimepiride is practically insoluble in water.</Description>
</NDC>
<NDC>
<NDCCode>30142-747-43</NDCCode>
<PackageDescription>473 mL in 1 BOTTLE, PLASTIC (30142-747-43) </PackageDescription>
<NDC11Code>30142-0747-43</NDC11Code>
<ProductNDC>30142-747</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aloe Vera Gel</ProprietaryName>
<NonProprietaryName>Lidocaine Hcl, Menthol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20211124</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>The Kroger Co</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; MENTHOL</SubstanceName>
<StrengthNumber>7; 2</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the temporary relief of pain and itching associated with: 1 minor burns, 2 sunburn, 3 minor cuts, 4 scrapes, 5 insect bites, 6 minor skin irritations.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>31722-747-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (31722-747-05) </PackageDescription>
<NDC11Code>31722-0747-05</NDC11Code>
<ProductNDC>31722-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203311</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan tablet is an angiotensin II receptor blocker (ARB) indicated for: Treatment of hypertension,to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Treatment of heart failure (NYHA class II to IV);valsartan tablets significantly reduced hospitalization for heart failure ( 1.2) Post-myocardial infarction:for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infrarction ( 1.3).</IndicationAndUsage>
<Description>Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan, USP is chemically described as L-valine, N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-. Its empirical formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>31722-747-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (31722-747-30) </PackageDescription>
<NDC11Code>31722-0747-30</NDC11Code>
<ProductNDC>31722-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203311</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan tablet is an angiotensin II receptor blocker (ARB) indicated for: Treatment of hypertension,to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Treatment of heart failure (NYHA class II to IV);valsartan tablets significantly reduced hospitalization for heart failure ( 1.2) Post-myocardial infarction:for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infrarction ( 1.3).</IndicationAndUsage>
<Description>Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan, USP is chemically described as L-valine, N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-. Its empirical formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>31722-747-31</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BLISTER PACK (31722-747-31) </PackageDescription>
<NDC11Code>31722-0747-31</NDC11Code>
<ProductNDC>31722-747</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan</ProprietaryName>
<NonProprietaryName>Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203311</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALSARTAN</SubstanceName>
<StrengthNumber>160</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan tablet is an angiotensin II receptor blocker (ARB) indicated for: Treatment of hypertension,to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions ( 1.1) Treatment of heart failure (NYHA class II to IV);valsartan tablets significantly reduced hospitalization for heart failure ( 1.2) Post-myocardial infarction:for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infrarction ( 1.3).</IndicationAndUsage>
<Description>Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT 1receptor subtype. Valsartan, USP is chemically described as L-valine, N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-. Its empirical formula is C 24H 29N 5O 3, its molecular weight is 435.52, and its structural formula is. Valsartan, USP is a white to an off-white powder. It is soluble in ethanol and methanol and insoluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, microcrystalline cellulose, polyethylene glycol, povidone, and titanium dioxide. In addition to this 40 mg contains iron oxide yellow, 80 mg contains iron oxide red, 160 mg contains iron oxides (yellow and red) and 320 mg contains iron oxides (yellow, red and black). Meets USP dissolution test 2.</Description>
</NDC>
</NDCList>