RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>50242-094-47</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (50242-094-47)  / 90 CAPSULE in 1 BOTTLE</PackageDescription>
    <NDC11Code>50242-0094-47</NDC11Code>
    <ProductNDC>50242-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rozlytrek</ProprietaryName>
    <NonProprietaryName>Entrectinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190815</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA212725</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <SubstanceName>ENTRECTINIB</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190815</StartMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>ROZLYTREK is a kinase inhibitor indicated for the treatment of: 1 Adult patients with ROS1-positive metastatic non-small cell lung cancer (NSCLC) as detected by an FDA-approved test. (1.1), 2 Adult and pediatric patients older than 1 month of age with solid tumors that: have a neurotrophic tyrosine receptor kinase (NTRK) gene fusion, as detected by an FDA-approved test without a known acquired resistance mutation,are metastatic or where surgical resection is likely to result in severe morbidity, andhave progressed following treatment or have no satisfactory alternative therapy.</IndicationAndUsage>
    <Description>Entrectinib is a kinase inhibitor. The molecular formula for entrectinib is C31H34F2N6O2 and the molecular weight is 560.64 Daltons. The chemical name is N-[5-(3,5-difluorobenzyl)-1H-indazol-3-yl]-4-(4-methylpiperazin-1-yl)-2-(tetrahydro-2H-pyran-4-ylamino) benzamide. The chemical structure of entrectinib is as follows. Entrectinib is white to pale pink powder.</Description>
  </NDC>
  <NDC>
    <NDCCode>50242-094-90</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (50242-094-90)  / 90 CAPSULE in 1 BOTTLE</PackageDescription>
    <NDC11Code>50242-0094-90</NDC11Code>
    <ProductNDC>50242-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rozlytrek</ProprietaryName>
    <NonProprietaryName>Entrectinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190815</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA212725</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <SubstanceName>ENTRECTINIB</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190815</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ROZLYTREK is a kinase inhibitor indicated for the treatment of: 1 Adult patients with ROS1-positive metastatic non-small cell lung cancer (NSCLC) as detected by an FDA-approved test. (1.1), 2 Adult and pediatric patients older than 1 month of age with solid tumors that: have a neurotrophic tyrosine receptor kinase (NTRK) gene fusion, as detected by an FDA-approved test without a known acquired resistance mutation,are metastatic or where surgical resection is likely to result in severe morbidity, andhave progressed following treatment or have no satisfactory alternative therapy.</IndicationAndUsage>
    <Description>Entrectinib is a kinase inhibitor. The molecular formula for entrectinib is C31H34F2N6O2 and the molecular weight is 560.64 Daltons. The chemical name is N-[5-(3,5-difluorobenzyl)-1H-indazol-3-yl]-4-(4-methylpiperazin-1-yl)-2-(tetrahydro-2H-pyran-4-ylamino) benzamide. The chemical structure of entrectinib is as follows. Entrectinib is white to pale pink powder.</Description>
  </NDC>
  <NDC>
    <NDCCode>50242-120-47</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (50242-120-47)  *  1 VIAL, SINGLE-USE in 1 CARTON (50242-037-06)  / 10 mL in 1 VIAL, SINGLE-USE *  1 VIAL, SINGLE-USE in 1 CARTON (50242-901-09)  / 10 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>50242-0120-47</NDC11Code>
    <ProductNDC>50242-120</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tnkase</ProprietaryName>
    <NonProprietaryName>Tenecteplase</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20181107</StartMarketingDate>
    <EndMarketingDate>20270131</EndMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103909</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-12-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20181107</StartMarketingDatePackage>
    <EndMarketingDatePackage>20270131</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TNKase® is indicated to reduce the risk of death associated with acute ST elevation myocardial infarction (STEMI).</IndicationAndUsage>
    <Description>Tenecteplase is a tissue plasminogen activator (tPA) produced by recombinant DNA technology using a mammalian cell line (Chinese Hamster Ovary cells). Tenecteplase is a 527-amino acid glycoprotein developed by introducing the following modifications to the complementary DNA (cDNA) for natural human tPA: a substitution of threonine 103 with asparagine, and a substitution of asparagine 117 with glutamine, both within the kringle 1 domain, and a tetra-alanine substitution at amino acids 296–299 in the protease domain. It has a molecular weight of 58,742 daltons. Biological potency is determined by an in vitro clot lysis assay and is expressed in tenecteplase specific units. The specific activity of tenecteplase has been defined as 200 units/mg. TNKase (tenecteplase) for injection is a sterile, white to pale yellow, lyophilized powder for intravenous bolus administration after reconstitution with Sterile Water for Injection, USP. Each single-dose vial of TNKase nominally contains 50 mg of tenecteplase, arginine (522 mg), phosphoric acid (approximately 160 mg), and polysorbate 20 (4.0 mg). Following reconstitution with the supplied 10 mL single-dose vial of Sterile Water for Injection, USP, the final concentration is 5 mg/mL with a pH of approximately 7.3.</Description>
  </NDC>
  <NDC>
    <NDCCode>33342-094-47</NDCCode>
    <PackageDescription>4 POUCH in 1 CARTON (33342-094-47)  / 1 BLISTER PACK in 1 POUCH / 5 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>33342-0094-47</NDC11Code>
    <ProductNDC>33342-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rizatriptan Benzoate</ProprietaryName>
    <NonProprietaryName>Rizatriptan Benzoate</NonProprietaryName>
    <DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140923</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203146</ApplicationNumber>
    <LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
    <SubstanceName>RIZATRIPTAN BENZOATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-03-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140923</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Rizatriptan benzoate orally disintegrating tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old.Limitations of Use  Rizatriptan benzoate orally disintegrating tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate orally disintegrating tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate tablets are administered to treat any subsequent attacks.  Rizatriptan benzoate orally disintegrating tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)].  Rizatriptan benzoate orally disintegrating tablets are not indicated for the prevention of migraine attacks.  Safety and effectiveness of rizatriptan benzoate orally disintegrating tablets have not been established for cluster headache.</IndicationAndUsage>
    <Description>Rizatriptan benzoate orally disintegrating tablets, USP contain rizatriptan benzoate, a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D ) receptor agonist. Rizatriptan benzoate is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 269.4. Rizatriptan benzoate, USP is a white to off-white, crystalline solid that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C. Rizatriptan benzoate orally disintegrating tablets, USP are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each orally disintegrating tablet contains following inactive ingredients: microcrystalline cellulose, colloidal silicon dioxide, carboxymethyl cellulose calcium, magnesium stearate, mannitol, aspartame, and peppermint flavor. USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>36800-094-47</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (36800-094-47)  &gt; 150 TABLET in 1 BOTTLE</PackageDescription>
    <NDC11Code>36800-0094-47</NDC11Code>
    <ProductNDC>36800-094</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Topcare Nasal Decongestant Pe</ProprietaryName>
    <NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050912</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>Topco Associates LLC</LabelerName>
    <SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2018-04-09</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>41250-094-47</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (41250-094-47)  &gt; 150 TABLET in 1 BOTTLE</PackageDescription>
    <NDC11Code>41250-0094-47</NDC11Code>
    <ProductNDC>41250-094</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Nasal Decongestant Pe</ProprietaryName>
    <ProprietaryNameSuffix>Maximum Strength</ProprietaryNameSuffix>
    <NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050406</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>Meijer Distribution Inc</LabelerName>
    <SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2018-04-05</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>42507-094-47</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (42507-094-47)  &gt; 150 TABLET in 1 BOTTLE</PackageDescription>
    <NDC11Code>42507-0094-47</NDC11Code>
    <ProductNDC>42507-094</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Nasal Decongestant Pe</ProprietaryName>
    <ProprietaryNameSuffix>Non Drowsy</ProprietaryNameSuffix>
    <NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050523</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>HyVee Inc</LabelerName>
    <SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2017-02-13</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>55312-094-47</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (55312-094-47)  &gt; 150 TABLET in 1 BOTTLE</PackageDescription>
    <NDC11Code>55312-0094-47</NDC11Code>
    <ProductNDC>55312-094</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Nasal Decongestant Pe</ProprietaryName>
    <ProprietaryNameSuffix>Non Drowsy Maximum Strength</ProprietaryNameSuffix>
    <NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20070509</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part341</ApplicationNumber>
    <LabelerName>Western Family Foods Inc</LabelerName>
    <SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2017-12-07</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>50242-108-01</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (50242-108-01)  / 11.7 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>50242-0108-01</NDC11Code>
    <ProductNDC>50242-108</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rituxan Hycela</ProprietaryName>
    <NonProprietaryName>Rituximab And Hyaluronidase</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20170622</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761064</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <SubstanceName>RITUXIMAB; HYALURONIDASE (HUMAN RECOMBINANT)</SubstanceName>
    <StrengthNumber>120; 2000</StrengthNumber>
    <StrengthUnit>mg/mL; U/mL</StrengthUnit>
    <Pharm_Classes>CD20-directed Antibody Interactions [MoA], CD20-directed Cytolytic Antibody [EPC], Endoglycosidase [EPC], Glycoside Hydrolases [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170622</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RITUXAN HYCELA is a combination of rituximab, a CD20-directed cytolytic antibody, and hyaluronidase human, an endoglycosidase, indicated for the treatment of adult patients with: 1 Follicular Lymphoma (FL) (1.1)Relapsed or refractory, follicular lymphoma as a single agentPreviously untreated follicular lymphoma in combination with first line chemotherapy and, in patients achieving a complete or partial response to rituximab in combination with chemotherapy, as single-agent maintenance therapyNon-progressing (including stable disease), follicular lymphoma as a single agent after first-line cyclophosphamide, vincristine, and prednisone (CVP) chemotherapy, 2 Diffuse Large B-cell Lymphoma (DLBCL) (1.2)Previously untreated diffuse large B-cell lymphoma in combination with cyclophosphamide, doxorubicin, vincristine, prednisone (CHOP) or other anthracycline-based chemotherapy regimens, 3 Chronic Lymphocytic Leukemia (CLL) (1.3)Previously untreated and previously treated CLL in combination with fludarabine and cyclophosphamide (FC).</IndicationAndUsage>
    <Description>RITUXAN HYCELA is a combination of rituximab and hyaluronidase human. Rituximab is a genetically engineered chimeric murine/human monoclonal IgG1 kappa antibody directed against the CD20 antigen. Rituximab has an approximate molecular weight of 145 kD. Rituximab has a binding affinity for the CD20 antigen of approximately 8.0 nM. Rituximab is produced by mammalian cell (Chinese Hamster Ovary) suspension. Recombinant human hyaluronidase is an endoglycosidase used to increase the dispersion and absorption of co-administered drugs when administered subcutaneously. It is produced by mammalian (Chinese Hamster Ovary) cells containing a DNA plasmid encoding for a soluble fragment of human hyaluronidase (PH20). It is a glycosylated single-chain protein with an approximate molecular weight of 61 kD. RITUXAN HYCELA (rituximab and hyaluronidase human) injection is a colorless to yellowish, clear to opalescent solution supplied in sterile, preservative-free, single-dose vials for subcutaneous use. RITUXAN HYCELA is supplied as 1,400 mg rituximab and 23,400 Units hyaluronidase human per 11.7 mL in single-dose vials or 1,600 mg rituximab and 26,800 Units hyaluronidase human per 13.4 mL in single-dose vials. Each mL of solution contains rituximab (120 mg), hyaluronidase human (2,000 Units), L-histidine (0.53 mg), L-histidine hydrochloride monohydrate (3.47 mg), L-methionine (1.49 mg), polysorbate 80 (0.6 mg), α,α-trehalose dihydrate (79.45 mg), and Water for Injection.</Description>
  </NDC>
  <NDC>
    <NDCCode>50242-108-86</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (50242-108-86)  / 11.7 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>50242-0108-86</NDC11Code>
    <ProductNDC>50242-108</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rituxan Hycela</ProprietaryName>
    <NonProprietaryName>Rituximab And Hyaluronidase</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20170622</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761064</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <SubstanceName>RITUXIMAB; HYALURONIDASE (HUMAN RECOMBINANT)</SubstanceName>
    <StrengthNumber>120; 2000</StrengthNumber>
    <StrengthUnit>mg/mL; U/mL</StrengthUnit>
    <Pharm_Classes>CD20-directed Antibody Interactions [MoA], CD20-directed Cytolytic Antibody [EPC], Endoglycosidase [EPC], Glycoside Hydrolases [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170623</StartMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>RITUXAN HYCELA is a combination of rituximab, a CD20-directed cytolytic antibody, and hyaluronidase human, an endoglycosidase, indicated for the treatment of adult patients with: 1 Follicular Lymphoma (FL) (1.1)Relapsed or refractory, follicular lymphoma as a single agentPreviously untreated follicular lymphoma in combination with first line chemotherapy and, in patients achieving a complete or partial response to rituximab in combination with chemotherapy, as single-agent maintenance therapyNon-progressing (including stable disease), follicular lymphoma as a single agent after first-line cyclophosphamide, vincristine, and prednisone (CVP) chemotherapy, 2 Diffuse Large B-cell Lymphoma (DLBCL) (1.2)Previously untreated diffuse large B-cell lymphoma in combination with cyclophosphamide, doxorubicin, vincristine, prednisone (CHOP) or other anthracycline-based chemotherapy regimens, 3 Chronic Lymphocytic Leukemia (CLL) (1.3)Previously untreated and previously treated CLL in combination with fludarabine and cyclophosphamide (FC).</IndicationAndUsage>
    <Description>RITUXAN HYCELA is a combination of rituximab and hyaluronidase human. Rituximab is a genetically engineered chimeric murine/human monoclonal IgG1 kappa antibody directed against the CD20 antigen. Rituximab has an approximate molecular weight of 145 kD. Rituximab has a binding affinity for the CD20 antigen of approximately 8.0 nM. Rituximab is produced by mammalian cell (Chinese Hamster Ovary) suspension. Recombinant human hyaluronidase is an endoglycosidase used to increase the dispersion and absorption of co-administered drugs when administered subcutaneously. It is produced by mammalian (Chinese Hamster Ovary) cells containing a DNA plasmid encoding for a soluble fragment of human hyaluronidase (PH20). It is a glycosylated single-chain protein with an approximate molecular weight of 61 kD. RITUXAN HYCELA (rituximab and hyaluronidase human) injection is a colorless to yellowish, clear to opalescent solution supplied in sterile, preservative-free, single-dose vials for subcutaneous use. RITUXAN HYCELA is supplied as 1,400 mg rituximab and 23,400 Units hyaluronidase human per 11.7 mL in single-dose vials or 1,600 mg rituximab and 26,800 Units hyaluronidase human per 13.4 mL in single-dose vials. Each mL of solution contains rituximab (120 mg), hyaluronidase human (2,000 Units), L-histidine (0.53 mg), L-histidine hydrochloride monohydrate (3.47 mg), L-methionine (1.49 mg), polysorbate 80 (0.6 mg), α,α-trehalose dihydrate (79.45 mg), and Water for Injection.</Description>
  </NDC>
  <NDC>
    <NDCCode>50242-109-01</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (50242-109-01)  / 13.4 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>50242-0109-01</NDC11Code>
    <ProductNDC>50242-109</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rituxan Hycela</ProprietaryName>
    <NonProprietaryName>Rituximab And Hyaluronidase</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20170622</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761064</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <SubstanceName>RITUXIMAB; HYALURONIDASE (HUMAN RECOMBINANT)</SubstanceName>
    <StrengthNumber>120; 2000</StrengthNumber>
    <StrengthUnit>mg/mL; U/mL</StrengthUnit>
    <Pharm_Classes>CD20-directed Antibody Interactions [MoA], CD20-directed Cytolytic Antibody [EPC], Endoglycosidase [EPC], Glycoside Hydrolases [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170622</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RITUXAN HYCELA is a combination of rituximab, a CD20-directed cytolytic antibody, and hyaluronidase human, an endoglycosidase, indicated for the treatment of adult patients with: 1 Follicular Lymphoma (FL) (1.1)Relapsed or refractory, follicular lymphoma as a single agentPreviously untreated follicular lymphoma in combination with first line chemotherapy and, in patients achieving a complete or partial response to rituximab in combination with chemotherapy, as single-agent maintenance therapyNon-progressing (including stable disease), follicular lymphoma as a single agent after first-line cyclophosphamide, vincristine, and prednisone (CVP) chemotherapy, 2 Diffuse Large B-cell Lymphoma (DLBCL) (1.2)Previously untreated diffuse large B-cell lymphoma in combination with cyclophosphamide, doxorubicin, vincristine, prednisone (CHOP) or other anthracycline-based chemotherapy regimens, 3 Chronic Lymphocytic Leukemia (CLL) (1.3)Previously untreated and previously treated CLL in combination with fludarabine and cyclophosphamide (FC).</IndicationAndUsage>
    <Description>RITUXAN HYCELA is a combination of rituximab and hyaluronidase human. Rituximab is a genetically engineered chimeric murine/human monoclonal IgG1 kappa antibody directed against the CD20 antigen. Rituximab has an approximate molecular weight of 145 kD. Rituximab has a binding affinity for the CD20 antigen of approximately 8.0 nM. Rituximab is produced by mammalian cell (Chinese Hamster Ovary) suspension. Recombinant human hyaluronidase is an endoglycosidase used to increase the dispersion and absorption of co-administered drugs when administered subcutaneously. It is produced by mammalian (Chinese Hamster Ovary) cells containing a DNA plasmid encoding for a soluble fragment of human hyaluronidase (PH20). It is a glycosylated single-chain protein with an approximate molecular weight of 61 kD. RITUXAN HYCELA (rituximab and hyaluronidase human) injection is a colorless to yellowish, clear to opalescent solution supplied in sterile, preservative-free, single-dose vials for subcutaneous use. RITUXAN HYCELA is supplied as 1,400 mg rituximab and 23,400 Units hyaluronidase human per 11.7 mL in single-dose vials or 1,600 mg rituximab and 26,800 Units hyaluronidase human per 13.4 mL in single-dose vials. Each mL of solution contains rituximab (120 mg), hyaluronidase human (2,000 Units), L-histidine (0.53 mg), L-histidine hydrochloride monohydrate (3.47 mg), L-methionine (1.49 mg), polysorbate 80 (0.6 mg), α,α-trehalose dihydrate (79.45 mg), and Water for Injection.</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-094-05</NDCCode>
    <PackageDescription>500 TABLET in 1 BOTTLE (13668-094-05) </PackageDescription>
    <NDC11Code>13668-0094-05</NDC11Code>
    <ProductNDC>13668-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20101008</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090865</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101008</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride is a non-ergot dopamine agonist indicated for the treatment of: 1   Parkinson's disease (PD) (1.1), 2   Moderate-to-severe primary Restless Legs Syndrome (RLS) (1.2).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is ( S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10H17N3S·2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride USP is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride USP is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 0.75 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate. Inactive ingredients consist of colloidal silicon dioxide, corn starch, ferric oxide red (0.25, 0.5 and 1 mg tablets), ferric oxide yellow (0.25 and 0.75 mg tablets), magnesium stearate, mannitol, povidone K-30 and pregelatinized maize starch. Pramipexole dihydrochloride tablets 0.125 mg:Each tablet contains 0.125 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.118 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.25 mg:Each tablet contains 0.25 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.235 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.5 mg:Each tablet contains 0.5 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.47 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.75 mg:Each tablet contains 0.75 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.705 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 1 mg:Each tablet contains 1 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.94 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 1.5 mg:Each tablet contains 1.5 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 1.41 mg pramipexole dihydrochloride (in anhydrous basis).</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-094-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (13668-094-30) </PackageDescription>
    <NDC11Code>13668-0094-30</NDC11Code>
    <ProductNDC>13668-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20101008</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090865</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101008</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride is a non-ergot dopamine agonist indicated for the treatment of: 1   Parkinson's disease (PD) (1.1), 2   Moderate-to-severe primary Restless Legs Syndrome (RLS) (1.2).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is ( S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10H17N3S·2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride USP is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride USP is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 0.75 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate. Inactive ingredients consist of colloidal silicon dioxide, corn starch, ferric oxide red (0.25, 0.5 and 1 mg tablets), ferric oxide yellow (0.25 and 0.75 mg tablets), magnesium stearate, mannitol, povidone K-30 and pregelatinized maize starch. Pramipexole dihydrochloride tablets 0.125 mg:Each tablet contains 0.125 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.118 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.25 mg:Each tablet contains 0.25 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.235 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.5 mg:Each tablet contains 0.5 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.47 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.75 mg:Each tablet contains 0.75 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.705 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 1 mg:Each tablet contains 1 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.94 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 1.5 mg:Each tablet contains 1.5 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 1.41 mg pramipexole dihydrochloride (in anhydrous basis).</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-094-31</NDCCode>
    <PackageDescription>2500 TABLET in 1 BOTTLE (13668-094-31) </PackageDescription>
    <NDC11Code>13668-0094-31</NDC11Code>
    <ProductNDC>13668-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20101008</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090865</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101008</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride is a non-ergot dopamine agonist indicated for the treatment of: 1   Parkinson's disease (PD) (1.1), 2   Moderate-to-severe primary Restless Legs Syndrome (RLS) (1.2).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is ( S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10H17N3S·2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride USP is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride USP is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 0.75 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate. Inactive ingredients consist of colloidal silicon dioxide, corn starch, ferric oxide red (0.25, 0.5 and 1 mg tablets), ferric oxide yellow (0.25 and 0.75 mg tablets), magnesium stearate, mannitol, povidone K-30 and pregelatinized maize starch. Pramipexole dihydrochloride tablets 0.125 mg:Each tablet contains 0.125 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.118 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.25 mg:Each tablet contains 0.25 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.235 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.5 mg:Each tablet contains 0.5 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.47 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.75 mg:Each tablet contains 0.75 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.705 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 1 mg:Each tablet contains 1 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.94 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 1.5 mg:Each tablet contains 1.5 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 1.41 mg pramipexole dihydrochloride (in anhydrous basis).</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-094-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (13668-094-90) </PackageDescription>
    <NDC11Code>13668-0094-90</NDC11Code>
    <ProductNDC>13668-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20101008</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090865</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101008</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride is a non-ergot dopamine agonist indicated for the treatment of: 1   Parkinson's disease (PD) (1.1), 2   Moderate-to-severe primary Restless Legs Syndrome (RLS) (1.2).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a nonergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is ( S)-2-amino-4,5,6,7-tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10H17N3S·2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride USP is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride USP is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride tablets, for oral administration, contain 0.125 mg, 0.25 mg, 0.5 mg, 0.75 mg, 1 mg, or 1.5 mg of pramipexole dihydrochloride monohydrate. Inactive ingredients consist of colloidal silicon dioxide, corn starch, ferric oxide red (0.25, 0.5 and 1 mg tablets), ferric oxide yellow (0.25 and 0.75 mg tablets), magnesium stearate, mannitol, povidone K-30 and pregelatinized maize starch. Pramipexole dihydrochloride tablets 0.125 mg:Each tablet contains 0.125 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.118 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.25 mg:Each tablet contains 0.25 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.235 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.5 mg:Each tablet contains 0.5 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.47 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 0.75 mg:Each tablet contains 0.75 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.705 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 1 mg:Each tablet contains 1 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 0.94 mg pramipexole dihydrochloride (in anhydrous basis). Pramipexole dihydrochloride tablets 1.5 mg:Each tablet contains 1.5 mg pramipexole dihydrochloride USP (in monohydrate form) equivalent to 1.41 mg pramipexole dihydrochloride (in anhydrous basis).</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-094-10</NDCCode>
    <PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (63187-094-10) </PackageDescription>
    <NDC11Code>63187-0094-10</NDC11Code>
    <ProductNDC>63187-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140731</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078048</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate  evidence of effectiveness for more prolonged use is not available and because muscle spasm associated  with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&amp;C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain hydroxypropyl methylcellulose, polysorbate, D&amp;C yellow # 10 aluminum lake, FD&amp;C yellow # 6 aluminum lake, methyl paraben, potassium sorbate, propylene glycol, propyl paraben, sodium citrate, and xanthum gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-094-15</NDCCode>
    <PackageDescription>15 TABLET, FILM COATED in 1 BOTTLE (63187-094-15) </PackageDescription>
    <NDC11Code>63187-0094-15</NDC11Code>
    <ProductNDC>63187-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140731</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078048</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate  evidence of effectiveness for more prolonged use is not available and because muscle spasm associated  with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&amp;C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain hydroxypropyl methylcellulose, polysorbate, D&amp;C yellow # 10 aluminum lake, FD&amp;C yellow # 6 aluminum lake, methyl paraben, potassium sorbate, propylene glycol, propyl paraben, sodium citrate, and xanthum gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-094-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (63187-094-30) </PackageDescription>
    <NDC11Code>63187-0094-30</NDC11Code>
    <ProductNDC>63187-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140731</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078048</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate  evidence of effectiveness for more prolonged use is not available and because muscle spasm associated  with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&amp;C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain hydroxypropyl methylcellulose, polysorbate, D&amp;C yellow # 10 aluminum lake, FD&amp;C yellow # 6 aluminum lake, methyl paraben, potassium sorbate, propylene glycol, propyl paraben, sodium citrate, and xanthum gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-094-40</NDCCode>
    <PackageDescription>40 TABLET, FILM COATED in 1 BOTTLE (63187-094-40) </PackageDescription>
    <NDC11Code>63187-0094-40</NDC11Code>
    <ProductNDC>63187-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140731</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078048</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200324</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate  evidence of effectiveness for more prolonged use is not available and because muscle spasm associated  with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&amp;C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain hydroxypropyl methylcellulose, polysorbate, D&amp;C yellow # 10 aluminum lake, FD&amp;C yellow # 6 aluminum lake, methyl paraben, potassium sorbate, propylene glycol, propyl paraben, sodium citrate, and xanthum gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-094-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (63187-094-60) </PackageDescription>
    <NDC11Code>63187-0094-60</NDC11Code>
    <ProductNDC>63187-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140731</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078048</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate  evidence of effectiveness for more prolonged use is not available and because muscle spasm associated  with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&amp;C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain hydroxypropyl methylcellulose, polysorbate, D&amp;C yellow # 10 aluminum lake, FD&amp;C yellow # 6 aluminum lake, methyl paraben, potassium sorbate, propylene glycol, propyl paraben, sodium citrate, and xanthum gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-094-72</NDCCode>
    <PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (63187-094-72) </PackageDescription>
    <NDC11Code>63187-0094-72</NDC11Code>
    <ProductNDC>63187-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140731</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078048</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate  evidence of effectiveness for more prolonged use is not available and because muscle spasm associated  with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&amp;C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain hydroxypropyl methylcellulose, polysorbate, D&amp;C yellow # 10 aluminum lake, FD&amp;C yellow # 6 aluminum lake, methyl paraben, potassium sorbate, propylene glycol, propyl paraben, sodium citrate, and xanthum gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-094-78</NDCCode>
    <PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE (63187-094-78) </PackageDescription>
    <NDC11Code>63187-0094-78</NDC11Code>
    <ProductNDC>63187-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140731</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078048</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate  evidence of effectiveness for more prolonged use is not available and because muscle spasm associated  with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&amp;C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain hydroxypropyl methylcellulose, polysorbate, D&amp;C yellow # 10 aluminum lake, FD&amp;C yellow # 6 aluminum lake, methyl paraben, potassium sorbate, propylene glycol, propyl paraben, sodium citrate, and xanthum gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-094-90</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (63187-094-90) </PackageDescription>
    <NDC11Code>63187-0094-90</NDC11Code>
    <ProductNDC>63187-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140731</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078048</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-10-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP is indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate  evidence of effectiveness for more prolonged use is not available and because muscle spasm associated  with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP have not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
    <Description>Cyclobenzaprine hydrochloride is a white, crystalline tricyclic amine salt with the empirical formula C20H21N HCl and a molecular weight of 311.9. It has a melting point of 217°C and a pKa of 8.47 at 25°C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine hydrochloride is designated chemically as 3-(5H-dibenzo [a,d] cyclohepten-5-ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Each 5 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 5 mg Cyclobenzaprine hydrochloride. Each 10 mg Cyclobenzaprine hydrochloride tablet for oral administration contains 10 mg Cyclobenzaprine hydrochloride. Each tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, croscarmellose sodium, silicon dioxide, magnesium stearate, carnauba wax, titanium dioxide, polyethylene glycol, and iron oxide yellow. In addition, 5 mg tablets also contain polyvinyl alcohol, talc, lecithin, and FD&amp;C yellow # 6 / sunset yellow FCF aluminum lake. In addition, 10 mg tablets also contain hydroxypropyl methylcellulose, polysorbate, D&amp;C yellow # 10 aluminum lake, FD&amp;C yellow # 6 aluminum lake, methyl paraben, potassium sorbate, propylene glycol, propyl paraben, sodium citrate, and xanthum gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-094-52</NDCCode>
    <PackageDescription>2 SYRINGE, PLASTIC in 1 CARTON (70377-094-52)  / 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
    <NDC11Code>70377-0094-52</NDC11Code>
    <ProductNDC>70377-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Liraglutide</ProprietaryName>
    <NonProprietaryName>Liraglutide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260425</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215245</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc.</LabelerName>
    <SubstanceName>LIRAGLUTIDE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260425</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Liraglutide injection is indicated: 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients aged 10 years and older with type 2 diabetes mellitus,, 2 to reduce the risk of major adverse cardiovascular events (cardiovascular death, non-fatal myocardial infarction, or non-fatal stroke) in adults with type 2 diabetes mellitus and established cardiovascular disease.</IndicationAndUsage>
    <Description>Liraglutide injection contains liraglutide, an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The peptide precursor of liraglutide, produced by a chemical synthesis using solid phase synthesis and is 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34. Liraglutide is made by attaching a C-16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26 of the peptide precursor. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3751.2 Daltons. The structural formula (Figure 1) is. Figure 1. Structural Formula of liraglutide. Liraglutide injection is a sterile, aqueous, clear, colorless or almost colorless solution for subcutaneous use. Each 1 mL of liraglutide injection solution contains 6 mg of liraglutide and the following inactive ingredients: sodium citrate dihydrate, 1.47 mg; propylene glycol, 14 mg; phenol, 5.5 mg; and water for injection. Liraglutide injection has a pH of approximately 8.15, hydrochloric acid or sodium hydroxide may be added to adjust pH. Each prefilled pen contains a 3 mL solution of liraglutide injection equivalent to 18 mg liraglutide (free-base, anhydrous).</Description>
  </NDC>
  <NDC>
    <NDCCode>70377-094-53</NDCCode>
    <PackageDescription>3 SYRINGE, PLASTIC in 1 CARTON (70377-094-53)  / 3 mL in 1 SYRINGE, PLASTIC</PackageDescription>
    <NDC11Code>70377-0094-53</NDC11Code>
    <ProductNDC>70377-094</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Liraglutide</ProprietaryName>
    <NonProprietaryName>Liraglutide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20260425</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215245</ApplicationNumber>
    <LabelerName>Biocon Pharma Inc.</LabelerName>
    <SubstanceName>LIRAGLUTIDE</SubstanceName>
    <StrengthNumber>6</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260425</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Liraglutide injection is indicated: 1 as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients aged 10 years and older with type 2 diabetes mellitus,, 2 to reduce the risk of major adverse cardiovascular events (cardiovascular death, non-fatal myocardial infarction, or non-fatal stroke) in adults with type 2 diabetes mellitus and established cardiovascular disease.</IndicationAndUsage>
    <Description>Liraglutide injection contains liraglutide, an analog of human GLP-1 and acts as a GLP-1 receptor agonist. The peptide precursor of liraglutide, produced by a chemical synthesis using solid phase synthesis and is 97% homologous to native human GLP-1 by substituting arginine for lysine at position 34. Liraglutide is made by attaching a C-16 fatty acid (palmitic acid) with a glutamic acid spacer on the remaining lysine residue at position 26 of the peptide precursor. The molecular formula of liraglutide is C172H265N43O51 and the molecular weight is 3751.2 Daltons. The structural formula (Figure 1) is. Figure 1. Structural Formula of liraglutide. Liraglutide injection is a sterile, aqueous, clear, colorless or almost colorless solution for subcutaneous use. Each 1 mL of liraglutide injection solution contains 6 mg of liraglutide and the following inactive ingredients: sodium citrate dihydrate, 1.47 mg; propylene glycol, 14 mg; phenol, 5.5 mg; and water for injection. Liraglutide injection has a pH of approximately 8.15, hydrochloric acid or sodium hydroxide may be added to adjust pH. Each prefilled pen contains a 3 mL solution of liraglutide injection equivalent to 18 mg liraglutide (free-base, anhydrous).</Description>
  </NDC>
  <NDC>
    <NDCCode>50242-001-05</NDCCode>
    <PackageDescription>1 AMPULE in 1 CONTAINER (50242-001-05)  &gt; 5 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>50242-0001-05</NDC11Code>
    <ProductNDC>50242-001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sterile Water</ProprietaryName>
    <NonProprietaryName>Water</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20180505</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
    <LabelerName>Genentech, Inc.</LabelerName>
    <SubstanceName>WATER</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180505</StartMarketingDatePackage>
    <EndMarketingDatePackage>20230119</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>50242-007-01</NDCCode>
    <PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (50242-007-01)  / 1 mL in 1 SYRINGE, PLASTIC</PackageDescription>
    <NDC11Code>50242-0007-01</NDC11Code>
    <ProductNDC>50242-007</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enspryng</ProprietaryName>
    <NonProprietaryName>Satralizumab</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20200814</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761149</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <SubstanceName>SATRALIZUMAB</SubstanceName>
    <StrengthNumber>120</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200814</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ENSPRYNG is indicated for the treatment of neuromyelitis optica spectrum disorder (NMOSD) in adult patients who are anti-aquaporin-4 (AQP4) antibody positive.</IndicationAndUsage>
    <Description>Satralizumab-mwge is a recombinant humanized anti-human interleukin 6 (IL-6) receptor monoclonal antibody based on a human IgG2 framework. Each light chain and heavy chain consists of 214 and 443 amino acids, respectively. Satralizumab-mwge is a glycoprotein with an approximate molecular weight of 143 kDa and is produced by recombinant DNA technology in Chinese hamster ovary cells. The binding of satralizumab-mwge to the IL-6 receptor is pH-sensitive. ENSPRYNG (satralizumab-mwge) injection for subcutaneous administration is supplied as a sterile, clear, colorless to slightly yellow solution with no preservative with an approximate pH of 6. ENSPRYNG is supplied in a single-dose 1.0 mL prefilled syringe with a needle safety device or a single-dose 1.0 mL autoinjector that contains a prefilled syringe. Each prefilled syringe or autoinjector delivers 1 mL of solution containing 120 mg satralizumab-mwge, L-arginine (26.1 mg), L-aspartic acid (pH adjustment), L-histidine (3.1 mg), poloxamer 188 (0.5 mg), and Water for Injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>50242-007-33</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (50242-007-33)  / 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>50242-0007-33</NDC11Code>
    <ProductNDC>50242-007</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enspryng</ProprietaryName>
    <NonProprietaryName>Satralizumab</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20200814</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761149</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <SubstanceName>SATRALIZUMAB</SubstanceName>
    <StrengthNumber>120</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260610</StartMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>ENSPRYNG is indicated for the treatment of neuromyelitis optica spectrum disorder (NMOSD) in adult patients who are anti-aquaporin-4 (AQP4) antibody positive.</IndicationAndUsage>
    <Description>Satralizumab-mwge is a recombinant humanized anti-human interleukin 6 (IL-6) receptor monoclonal antibody based on a human IgG2 framework. Each light chain and heavy chain consists of 214 and 443 amino acids, respectively. Satralizumab-mwge is a glycoprotein with an approximate molecular weight of 143 kDa and is produced by recombinant DNA technology in Chinese hamster ovary cells. The binding of satralizumab-mwge to the IL-6 receptor is pH-sensitive. ENSPRYNG (satralizumab-mwge) injection for subcutaneous administration is supplied as a sterile, clear, colorless to slightly yellow solution with no preservative with an approximate pH of 6. ENSPRYNG is supplied in a single-dose 1.0 mL prefilled syringe with a needle safety device or a single-dose 1.0 mL autoinjector that contains a prefilled syringe. Each prefilled syringe or autoinjector delivers 1 mL of solution containing 120 mg satralizumab-mwge, L-arginine (26.1 mg), L-aspartic acid (pH adjustment), L-histidine (3.1 mg), poloxamer 188 (0.5 mg), and Water for Injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>50242-007-55</NDCCode>
    <PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (50242-007-55)  / 1 mL in 1 SYRINGE, PLASTIC</PackageDescription>
    <NDC11Code>50242-0007-55</NDC11Code>
    <ProductNDC>50242-007</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enspryng</ProprietaryName>
    <NonProprietaryName>Satralizumab</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20200814</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761149</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <SubstanceName>SATRALIZUMAB</SubstanceName>
    <StrengthNumber>120</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260610</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ENSPRYNG is indicated for the treatment of neuromyelitis optica spectrum disorder (NMOSD) in adult patients who are anti-aquaporin-4 (AQP4) antibody positive.</IndicationAndUsage>
    <Description>Satralizumab-mwge is a recombinant humanized anti-human interleukin 6 (IL-6) receptor monoclonal antibody based on a human IgG2 framework. Each light chain and heavy chain consists of 214 and 443 amino acids, respectively. Satralizumab-mwge is a glycoprotein with an approximate molecular weight of 143 kDa and is produced by recombinant DNA technology in Chinese hamster ovary cells. The binding of satralizumab-mwge to the IL-6 receptor is pH-sensitive. ENSPRYNG (satralizumab-mwge) injection for subcutaneous administration is supplied as a sterile, clear, colorless to slightly yellow solution with no preservative with an approximate pH of 6. ENSPRYNG is supplied in a single-dose 1.0 mL prefilled syringe with a needle safety device or a single-dose 1.0 mL autoinjector that contains a prefilled syringe. Each prefilled syringe or autoinjector delivers 1 mL of solution containing 120 mg satralizumab-mwge, L-arginine (26.1 mg), L-aspartic acid (pH adjustment), L-histidine (3.1 mg), poloxamer 188 (0.5 mg), and Water for Injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>50242-007-86</NDCCode>
    <PackageDescription>1 SYRINGE, PLASTIC in 1 CARTON (50242-007-86)  / 1 mL in 1 SYRINGE, PLASTIC</PackageDescription>
    <NDC11Code>50242-0007-86</NDC11Code>
    <ProductNDC>50242-007</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enspryng</ProprietaryName>
    <NonProprietaryName>Satralizumab</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20200814</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761149</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <SubstanceName>SATRALIZUMAB</SubstanceName>
    <StrengthNumber>120</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210813</StartMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>ENSPRYNG is indicated for the treatment of neuromyelitis optica spectrum disorder (NMOSD) in adult patients who are anti-aquaporin-4 (AQP4) antibody positive.</IndicationAndUsage>
    <Description>Satralizumab-mwge is a recombinant humanized anti-human interleukin 6 (IL-6) receptor monoclonal antibody based on a human IgG2 framework. Each light chain and heavy chain consists of 214 and 443 amino acids, respectively. Satralizumab-mwge is a glycoprotein with an approximate molecular weight of 143 kDa and is produced by recombinant DNA technology in Chinese hamster ovary cells. The binding of satralizumab-mwge to the IL-6 receptor is pH-sensitive. ENSPRYNG (satralizumab-mwge) injection for subcutaneous administration is supplied as a sterile, clear, colorless to slightly yellow solution with no preservative with an approximate pH of 6. ENSPRYNG is supplied in a single-dose 1.0 mL prefilled syringe with a needle safety device or a single-dose 1.0 mL autoinjector that contains a prefilled syringe. Each prefilled syringe or autoinjector delivers 1 mL of solution containing 120 mg satralizumab-mwge, L-arginine (26.1 mg), L-aspartic acid (pH adjustment), L-histidine (3.1 mg), poloxamer 188 (0.5 mg), and Water for Injection, USP.</Description>
  </NDC>
</NDCList>