{
"NDC": [
{
"NDCCode": "50436-0250-2",
"PackageDescription": "14 TABLET in 1 BOTTLE (50436-0250-2) ",
"NDC11Code": "50436-0250-02",
"ProductNDC": "50436-0250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040876",
"LabelerName": "Unit Dose Services",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170707",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose."
},
{
"NDCCode": "50436-0250-1",
"PackageDescription": "7 TABLET in 1 BOTTLE (50436-0250-1) ",
"NDC11Code": "50436-0250-01",
"ProductNDC": "50436-0250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040876",
"LabelerName": "Unit Dose Services",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170707",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose."
},
{
"NDCCode": "50436-0250-3",
"PackageDescription": "21 TABLET in 1 BOTTLE (50436-0250-3) ",
"NDC11Code": "50436-0250-03",
"ProductNDC": "50436-0250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040876",
"LabelerName": "Unit Dose Services",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170707",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose."
},
{
"NDCCode": "50436-0250-4",
"PackageDescription": "28 TABLET in 1 BOTTLE (50436-0250-4) ",
"NDC11Code": "50436-0250-04",
"ProductNDC": "50436-0250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040876",
"LabelerName": "Unit Dose Services",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20170707",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose."
},
{
"NDCCode": "50436-0250-5",
"PackageDescription": "30 TABLET in 1 BOTTLE (50436-0250-5) ",
"NDC11Code": "50436-0250-05",
"ProductNDC": "50436-0250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040876",
"LabelerName": "Unit Dose Services",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210317",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose."
},
{
"NDCCode": "50436-0250-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (50436-0250-6) ",
"NDC11Code": "50436-0250-06",
"ProductNDC": "50436-0250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040876",
"LabelerName": "Unit Dose Services",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210317",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose."
},
{
"NDCCode": "50436-0250-7",
"PackageDescription": "56 TABLET in 1 BOTTLE (50436-0250-7) ",
"NDC11Code": "50436-0250-07",
"ProductNDC": "50436-0250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040876",
"LabelerName": "Unit Dose Services",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "37.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230404",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose."
},
{
"NDCCode": "15631-0250-2",
"PackageDescription": "400 PELLET in 1 PACKAGE (15631-0250-2) ",
"NDC11Code": "15631-0250-02",
"ProductNDC": "15631-0250",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kali Iodatum",
"NonProprietaryName": "Kali Iodatum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150905",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "POTASSIUM IODIDE",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "37662-0250-2",
"PackageDescription": "1200 PELLET in 1 BOTTLE, GLASS (37662-0250-2) ",
"NDC11Code": "37662-0250-02",
"ProductNDC": "37662-0250",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Chininum Sulphuricum",
"NonProprietaryName": "Chininum Sulphuricum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220601",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "QUININE SULFATE",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Pharm_Classes": "Antimalarial [EPC]",
"Status": "Active",
"LastUpdate": "2022-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220601",
"SamplePackage": "N"
},
{
"NDCCode": "49288-0250-1",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (49288-0250-1)",
"NDC11Code": "49288-0250-01",
"ProductNDC": "49288-0250",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Haddock",
"NonProprietaryName": "Haddock",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "HADDOCK",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fish Proteins, Dietary [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "49288-0250-2",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (49288-0250-2)",
"NDC11Code": "49288-0250-02",
"ProductNDC": "49288-0250",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Haddock",
"NonProprietaryName": "Haddock",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "HADDOCK",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fish Proteins, Dietary [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "57955-0250-2",
"PackageDescription": "1 BOTTLE, SPRAY in 1 CARTON (57955-0250-2) > 59 mL in 1 BOTTLE, SPRAY",
"NDC11Code": "57955-0250-02",
"ProductNDC": "57955-0250",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Anti Aging And Wrinkles For Women",
"NonProprietaryName": "Abrotanum, Adrenalinum, Adrenocorticotrophin, Alpha-ketoglutaricum Acidum, Alpha-lipoicum Acidum, Baryta Carbonica, Calcarea Fluorica, Citricum Acidum, Coenzyme A, Dna, Ferrum Metallicum, Glandula Suprarenalis Suis, Hekla Lava, Helleborus Niger, Hypothalamus, Lycopodium Clavatum, Oophorinum, Rna, Secale Cornutum, Silicea, Thiaminum Hydrochloricum",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20180205",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "King Bio Inc.",
"SubstanceName": "ARTEMISIA ABROTANUM FLOWERING TOP; EPINEPHRINE; CORTICOTROPIN; .ALPHA.-KETOGLUTARIC ACID; .ALPHA.-LIPOIC ACID; BARIUM CARBONATE; CALCIUM FLUORIDE; ANHYDROUS CITRIC ACID; COENZYME A; HERRING SPERM DNA; IRON; SUS SCROFA ADRENAL GLAND; HEKLA LAVA; HELLEBORUS NIGER ROOT; BOS TAURUS HYPOTHALAMUS; LYCOPODIUM CLAVATUM SPORE; SUS SCROFA OVARY; SACCHAROMYCES CEREVISIAE RNA; CLAVICEPS PURPUREA SCLEROTIUM; SILICON DIOXIDE; THIAMINE HYDROCHLORIDE",
"StrengthNumber": "10; 10; 30; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10",
"StrengthUnit": "[hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180205",
"SamplePackage": "N"
},
{
"NDCCode": "64656-0250-2",
"PackageDescription": "30 L in 1 DEWAR (64656-0250-2)",
"NDC11Code": "64656-0250-02",
"ProductNDC": "64656-0250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19360101",
"MarketingCategoryName": "UNAPPROVED MEDICAL GAS",
"LabelerName": "Mercy Home Care-HME",
"SubstanceName": "OXYGEN",
"StrengthNumber": "99",
"StrengthUnit": "L/100L",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "66219-0250-1",
"PackageDescription": "1 BAG in 1 DRUM (66219-0250-1) > 25 kg in 1 BAG (66219-0250-2)",
"NDC11Code": "66219-0250-01",
"ProductNDC": "66219-0250",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Dyclonine Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110412",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Changzhou Tianhua Pharmaceutical Co. Ltd.",
"SubstanceName": "DYCLONINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "67370-0250-1",
"PackageDescription": "1 BAG in 1 BOX (67370-0250-1) > 25 kg in 1 BAG (67370-0250-2)",
"NDC11Code": "67370-0250-01",
"ProductNDC": "67370-0250",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Dyclonine Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20100519",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Santec Chemicals Corp.",
"SubstanceName": "DYCLONINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "67995-0250-1",
"PackageDescription": "1 BAG in 1 DRUM (67995-0250-1) > 25 kg in 1 BAG (67995-0250-2)",
"NDC11Code": "67995-0250-01",
"ProductNDC": "67995-0250",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Dyclonine Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110412",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Yicheng Chemical Corp.",
"SubstanceName": "DYCLONINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "69800-0250-1",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (69800-0250-1) / 50 mL in 1 VIAL, SINGLE-USE (69800-0250-2) ",
"NDC11Code": "69800-0250-01",
"ProductNDC": "69800-0250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Asceniv",
"NonProprietaryName": "Human Immunoglobulin G",
"DosageFormName": "LIQUID",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190401",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125590",
"LabelerName": "ADMA Biologics, Inc.",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "5",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2026-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190401",
"SamplePackage": "N",
"IndicationAndUsage": "ASCENIV is indicated for the treatment of primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. PI includes, but is not limited to, the humoral immune defect in congenital agammaglobulinemia, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies (SCID).",
"Description": "ASCENIV (immune globulin intravenous, human - slra) is a purified, sterile, ready-to-use preparation of concentrated human immunoglobulin G (IgG) antibodies. The distribution of IgG subclasses is similar to that of normal plasma. The active ingredient is human immunoglobulin purified from source human plasma and processed using a modified classical Cohn Method 6 / Oncley Method 9 fractionation process as well as anion and cation exchange steps for added purification. ASCENIV contains 100 ± 10 mg/mL protein, of which not less than 96% is human immunoglobulin obtained from source human plasma. It is formulated in water for injection containing 0.100-0.140 M sodium chloride, 0.20-0.29 M glycine, 0.15–0.25% polysorbate 80, and pH 4.0–4.6. ASCENIV contains ≤ 200 µg/mL of IgA. Each plasma donation used for the manufacture of ASCENIV is collected from FDA-licensed facilities and undergoes rigorous testing. Plasma donations must test negative for hepatitis B virus (HBV) surface antigen (HBsAg), antibodies to human immunodeficiency virus (HIV) strains 1 and 2 (anti-HIV-1/2), and antibodies to the hepatitis C virus (anti-HCV) as determined by enzyme immune assay (EIA). In addition, each plasma unit must test negative and/or non-reactive for HIV RNA, HCV RNA, HBV DNA, Hepatitis A Virus (HAV) RNA, and Parvovirus B19 (B19 virus) DNA as determined by Nucleic Acid Amplification Testing (NAT) of plasma minipools. NAT is also performed on a sample of the manufacturing pool and must be negative and/or non-reactive for HIV RNA, HCV RNA, HBV DNA, and Hepatatis A Virus (HAV) RNA, and the limit for B19 virus DNA in a manufacturing pool is set not to exceed 10 4 IU/mL. The manufacturing process of ASCENIV employs six steps to remove/inactivate adventitious viruses to minimize the risk of virus transmission. The steps are \"Precipitation and removal of fraction III\" during cold ethanol fractionation, \"Q-membrane filtration\", \"Solvent/detergent treatment\" (TnBP / Triton X-100), \"Anion exchange chromatography\" and \"virus filtration\". In compliance with current guidelines, the steps have been separately validated in a series of in vitro experiments for their capacity to inactivate or remove both enveloped and non-enveloped viruses. Precipitation and removal of fraction III and Q-membrane filtration removes non-enveloped viruses, solvent/detergent treatment represents a virus inactivation step for enveloped viruses, Anion exchange chromatography binds enveloped and non-enveloped viruses, and virus filtration removes both enveloped and non-enveloped viruses by size exclusion. In addition to the steps above, low pH during several steps of the production process contributes to virus inactivation. The results of virus validation studies for the ASCENIV process are shown in Table 4, expressed as log 10 reduction factors."
},
{
"NDCCode": "70000-0250-1",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (70000-0250-1) > 6 TABLET in 1 BLISTER PACK",
"NDC11Code": "70000-0250-01",
"ProductNDC": "70000-0250",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Motion Sickness Relief",
"NonProprietaryName": "Dimenhydrinate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19921201",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part336",
"LabelerName": "Cardinal Health",
"SubstanceName": "DIMENHYDRINATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-04-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "19921201",
"SamplePackage": "N"
},
{
"NDCCode": "71335-0250-2",
"PackageDescription": "30 TABLET in 1 BOTTLE (71335-0250-2) ",
"NDC11Code": "71335-0250-02",
"ProductNDC": "71335-0250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090564",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "850",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20130319",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets, USP contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride. Each tablet contains the inactive ingredients povidone (K-30), Povidone (K-90), pregelatinized starch, and magnesium stearate. In addition, the coating for the tablet contains artificial blackberry flavor, hypromellose, macrogol and titanium dioxide."
},
{
"NDCCode": "75744-0250-2",
"PackageDescription": "1000 L in 1 CONTAINER, FLEXIBLE INTERMEDIATE BULK (75744-0250-2) ",
"NDC11Code": "75744-0250-02",
"ProductNDC": "75744-0250",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130929",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Grupo Insoma S.A.P.I de C.V.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "700",
"StrengthUnit": "L/1000L",
"Status": "Deprecated",
"LastUpdate": "2020-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20130929",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available."
},
{
"NDCCode": "50436-0005-2",
"PackageDescription": "200 POUCH in 1 CASE (50436-0005-2) > 2 TABLET, FILM COATED in 1 POUCH",
"NDC11Code": "50436-0005-02",
"ProductNDC": "50436-0005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil Citrate",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204883",
"LabelerName": "Unit Dose Services",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC],Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190313",
"SamplePackage": "N",
"IndicationAndUsage": "Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). (1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. (1, 14).",
"Description": "Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo [4,3-d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin."
},
{
"NDCCode": "50436-0007-2",
"PackageDescription": "60 TABLET in 1 BOTTLE (50436-0007-2)",
"NDC11Code": "50436-0007-02",
"ProductNDC": "50436-0007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolpidem Tartrate",
"NonProprietaryName": "Zolpidem Tartrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077903",
"LabelerName": "Unit Dose Services",
"SubstanceName": "ZOLPIDEM TARTRATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [CS],Central Nervous System Depression [PE]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"IndicationAndUsage": "Zolpidem tartrate tablets, USP a gamma-amino butyric acid (GABA) A agonist, are indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation.",
"Description": "Zolpidem tartrate is a gamma-aminobutyric acid (GABA) A agonist of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate, USP is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet, USP includes the following inactive ingredients: hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, polyethylene glycol, sodium starch glycolate, titanium dioxide and ferric oxide red; the 10 mg tablet also contains ferric oxide yellow."
},
{
"NDCCode": "50436-0009-2",
"PackageDescription": "60 TABLET in 1 BOTTLE (50436-0009-2) ",
"NDC11Code": "50436-0009-02",
"ProductNDC": "50436-0009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zolpidem",
"NonProprietaryName": "Zolpidem Tartrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200924",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077214",
"LabelerName": "Unit Dose Services",
"SubstanceName": "ZOLPIDEM TARTRATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Depression [PE], GABA A Agonists [MoA], Pyridines [CS], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220301",
"SamplePackage": "N",
"IndicationAndUsage": "Zolpidem Tartrate Tablets is indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation. Zolpidem Tartrate Tablets has been shown to decrease sleep latency for up to 35 days in controlled clinical studies [see Clinical Studies (14)]. The clinical trials performed in support of efficacy were 4–5 weeks in duration with the final formal assessments of sleep latency performed at the end of treatment.",
"Description": "Zolpidem Tartrate Tablets contains Zolpidem tartrate, a gamma-aminobutyric acid (GABA) A receptor positive modulator of the imidazopyridine class. Zolpidem Tartrate Tablets is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, Zolpidem is N, N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem Tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each Zolpidem Tartrate Tablet includes the following inactive ingredients: lactose anhydrous, sodium starch glycolate, colloidal silicon dioxide, microcrystalline cellulose, magnesium stearate. The 10 mg tablets also contain Opadry II (white) and the 5 mg tablets contain Opadry II (pink). Opadry II (white) contains hypromellose, polyeth ylene glycol, polydextrose, titanium dioxide, and triacetin. Opadry II (pink) contains hypromellose, FD&C Red no. 40 aluminum lake, FD&C Blue no. 2 aluminum lake, FD&C Yellow no. 6 aluminum lake, polyeth ylene glycol, polydextrose, titanium dioxide, and triacetin."
},
{
"NDCCode": "50436-0018-2",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (50436-0018-2)",
"NDC11Code": "50436-0018-02",
"ProductNDC": "50436-0018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetine Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090778",
"LabelerName": "Unit Dose Services",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major Depressive Disorder [see Clinical Studies (14.1)], 2 Generalized Anxiety Disorder [see Clinical Studies (14.2)], 3 Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)], 4 Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].",
"Description": "Duloxetine delayed-release capsules are selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include crospovidone, hydroxy propyl cellulose, hypromellose, hypromellose phthalate, methylene chloride, sugar spheres, talc, titanium dioxide, and triethylcitrate. The empty hard gelatin capsule shells contain gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, the 20 mg and 60 mg contain FD&C Blue No. 2 and iron oxide yellow and 30 mg contains FD&C Blue No. 2. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution."
},
{
"NDCCode": "50436-0024-2",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (50436-0024-2) ",
"NDC11Code": "50436-0024-02",
"ProductNDC": "50436-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glyburide And Metformin Hydrochloride",
"NonProprietaryName": "Glyburide And Metformin Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20071114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077870",
"LabelerName": "Unit Dose Services",
"SubstanceName": "GLYBURIDE; METFORMIN HYDROCHLORIDE",
"StrengthNumber": "2.5; 500",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Sulfonylurea [EPC],Sulfonylurea Compounds [CS],Biguanide [EPC],Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20180927",
"SamplePackage": "N",
"IndicationAndUsage": "Glyburide and metformin hydrochloride tablets, USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Glyburide and metformin hydrochloride tablets, USP contain 2 oral antihyperglycemic drugs used in the management of type 2 diabetes, glyburide USP and metformin hydrochloride USP.Glyburide USP is an oral antihyperglycemic drug of the sulfonylurea class. The chemical name for glyburide is 1-[[p-[2-(5-chloro-o-anisamido)ethyl]phenyl]sulfonyl]-3-cyclo-hexylurea. Glyburide USP is a white to off-white crystalline compound. The structural formula is represented below. Metformin hydrochloride USP is an oral antihyperglycemic drug used in the management of type 2 diabetes. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide monohydrochloride) is not chemically or pharmacologically related to sulfonylureas, thiazolidinediones, or α-glucosidase inhibitors. It is a white to off-white crystalline compound. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is as shown:. Glyburide and metformin hydrochloride tablets, USP are available for oral administration containing 1.25 mg glyburide USP with 250 mg metformin hydrochloride USP, 2.5 mg glyburide USP with 500 mg metformin hydrochloride USP, and 5 mg glyburide USP with 500 mg metformin hydrochloride USP. In addition, each film-coated tablet contains the following inactive ingredients: microcrystalline cellulose, croscarmellose sodium, povidone, magnesium stearate, hypromellose, propylene glycol, polysorbate 80, talc, titanium dioxide and FD&C Yellow#6 aluminum lake. The 1.25 mg/250 mg and 5 mg/500 mg strengths also contain D&C Yellow#10 aluminum lake; The 2.5 mg/500 mg strength also contains FD&C Red#40 aluminum lake. Meets USP Dissolution Test 2."
},
{
"NDCCode": "50436-0031-2",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (50436-0031-2) ",
"NDC11Code": "50436-0031-02",
"ProductNDC": "50436-0031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20051109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065271",
"LabelerName": "Unit Dose Services",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220301",
"SamplePackage": "N",
"IndicationAndUsage": "Amoxicillin capsules are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. (1.1 – 1.4), 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5).",
"Description": "Formulation of amoxicillin capsules, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2S,5R,6R)-6-[(R)-(-)-2-amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as: The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.45. Each capsule of amoxicillin with blue cap and pink body, contains 250 mg or 500 mg amoxicillin USP as the trihydrate. The body of the 250 mg capsule is imprinted with ‘A44’ in black ink. The body of the 500 mg capsule is imprinted with ‘A45’ in black ink. Inactive ingredients: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and titanium dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "50436-0033-2",
"PackageDescription": "1620 POUCH in 1 CASE (50436-0033-2) > 2 TABLET, FILM COATED in 1 POUCH",
"NDC11Code": "50436-0033-02",
"ProductNDC": "50436-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil",
"NonProprietaryName": "Sildenafil Citrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120927",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021845",
"LabelerName": "Unit Dose Services",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210216",
"SamplePackage": "N",
"IndicationAndUsage": "Sildenafil is indicated for the treatment of pulmonary arterial hypertension (WHO Group I) in adults to improve exercise ability and delay clinical worsening. The delay in clinical worsening was demonstrated when sildenafil was added to background epoprostenol therapy [see Clinical Studies (14)]. Studies establishing effectiveness were short-term (12 to 16 weeks), included predominately patients with New York Heart Association (NYHA) Functional Class II–III symptoms and idiopathic etiology (71%) or associated with connective tissue disease (CTD) (25%).",
"Description": "Sildenafil, phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo [4,3-d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white to off-white crystalline powder with a solubility of 3.5 mg/mL in water and a molecular weight of 666.7. Sildenafil Tablets: Sildenafil is formulated as white, film-coated round tablets for oral administration. Each tablet contains sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate, each tablet contains the following inactive ingredients: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, magnesium stearate, hypromellose, titanium dioxide, lactose monohydrate, and triacetin."
},
{
"NDCCode": "50436-0034-2",
"PackageDescription": "2 TABLET, FILM COATED in 1 POUCH (50436-0034-2) ",
"NDC11Code": "50436-0034-02",
"ProductNDC": "50436-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sildenafil",
"NonProprietaryName": "Sildenafil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120927",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021845",
"LabelerName": "Unit Dose Services",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220301",
"SamplePackage": "N",
"IndicationAndUsage": "Sildenafil is indicated for the treatment of pulmonary arterial hypertension (WHO Group I) in adults to improve exercise ability and delay clinical worsening. The delay in clinical worsening was demonstrated when sildenafil was added to background epoprostenol therapy [see Clinical Studies (14)]. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with New York Heart Association (NYHA) Functional Class II–III symptoms and idiopathic etiology (71%) or associated with connective tissue disease (CTD) (25%).",
"Description": "Sildenafil, phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo [4,3-d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white to off-white crystalline powder with a solubility of 3.5 mg/mL in water and a molecular weight of 666.7. Sildenafil Tablets: Sildenafil is formulated as white, film-coated round tablets for oral administration. Each tablet contains sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate, each tablet contains the following inactive ingredients: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, magnesium stearate, hypromellose, titanium dioxide, lactose monohydrate, and triacetin. Sildenafil for Oral Suspension: Sildenafil is supplied as white to off-white powders containing 1.57 g of sildenafil citrate (equivalent to 1.12 g sildenafil) in an amber glass bottle intended for reconstitution. Following reconstitution with 90 mL water, the volume of the oral suspension is 112 mL and the oral suspension contains 10 mg/mL sildenafil. The inactive ingredients include sorbitol, citric acid anhydrous, sucralose, sodium citrate dihydrate, xanthan gum, titanium dioxide, sodium benzoate, colloidal silicon dioxide anhydrous and grape flavor. In addition to the bottle, a press-in bottle adapter and an oral dosing syringe (with 0.5 mL and 2 mL dose markings) are provided."
},
{
"NDCCode": "50436-0041-2",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (50436-0041-2) ",
"NDC11Code": "50436-0041-02",
"ProductNDC": "50436-0041",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Etodolac",
"NonProprietaryName": "Etodolac",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20030501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076004",
"LabelerName": "Unit Dose Services",
"SubstanceName": "ETODOLAC",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20171011",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of etodolac and other treatment options before deciding to use etodolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Etodolac tablets, USP are indicated: 1 For acute and long-term use in the management of signs and symptoms of the following:Osteoarthritis Rheumatoid arthritis , 2 For the management of acute pain .",
"Description": "Etodolac is a member of the pyranocarboxylic acid group of nonsteroidal anti-inflammatory drugs (NSAIDs). Etodolac is a racemic mixture of [+]S and [-]R-enantiomers. Etodolac is a white crystalline compound, insoluble in water but soluble in alcohols, chloroform, dimethyl sulfoxide, and aqueous polyethylene glycol. The chemical name is (±) 1,8-diethyl-1,3,4,9-tetrahydropyrano-[3,4-b]indole-1-acetic acid. The molecular weight of the base is 287.37. It has a pKa of 4.65 and an n-octanol:water partition coefficient of 11.4 at pH 7.4. The molecular formula for etodolac is C17H21NO3, and it has the following structural formula:. Each etodolac tablet, USP is for oral administration, contains 400 mg or 500 mg of etodolac. In addition, each tablet contains the following inactive ingredients: crospovidone, hydroxypropyl cellulose, hypromellose, magnesium stearate, methylcellulose, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "50436-0065-2",
"PackageDescription": "60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (50436-0065-2)",
"NDC11Code": "50436-0065-02",
"ProductNDC": "50436-0065",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20031111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076048",
"LabelerName": "Unit Dose Services",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"IndicationAndUsage": "Omeprazole is a proton pump inhibitor (PPI) indicated for the: : 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2), 3 Treatment of active benign gastric ulcer in adults (1.3), 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4), 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 month of age and older (1.5), 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6), 7 Pathologic hypersecretory conditions in adults (1.7).",
"Description": "The active ingredient in omeprazole delayed-release capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole in the form of enteric-coated granules with the following inactive ingredients: magnesium hydroxide, mannitol, methacrylic acid copolymer dispersion, povidone and triethyl citrate. The capsule shells have the following inactive ingredients: D&C Red No. 28*, D&C Red No.33*, D&C Yellow No. 10*, FD&C Blue No. 1*, FD&C Red No. 40*, gelatin, iron oxide red* and titanium dioxide (*contains one or more of these ingredients). The capsule imprinting ink contains ammonium hydroxide, black iron oxide, ethyl alcohol, isopropyl alcohol, n-butyl alcohol, potassium hydroxide, propylene glycol and shellac."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>50436-0250-2</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE (50436-0250-2) </PackageDescription>
<NDC11Code>50436-0250-02</NDC11Code>
<ProductNDC>50436-0250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040876</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170707</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>50436-0250-1</NDCCode>
<PackageDescription>7 TABLET in 1 BOTTLE (50436-0250-1) </PackageDescription>
<NDC11Code>50436-0250-01</NDC11Code>
<ProductNDC>50436-0250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040876</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170707</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>50436-0250-3</NDCCode>
<PackageDescription>21 TABLET in 1 BOTTLE (50436-0250-3) </PackageDescription>
<NDC11Code>50436-0250-03</NDC11Code>
<ProductNDC>50436-0250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040876</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170707</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>50436-0250-4</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (50436-0250-4) </PackageDescription>
<NDC11Code>50436-0250-04</NDC11Code>
<ProductNDC>50436-0250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040876</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170707</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>50436-0250-5</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50436-0250-5) </PackageDescription>
<NDC11Code>50436-0250-05</NDC11Code>
<ProductNDC>50436-0250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040876</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>50436-0250-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (50436-0250-6) </PackageDescription>
<NDC11Code>50436-0250-06</NDC11Code>
<ProductNDC>50436-0250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040876</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210317</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>50436-0250-7</NDCCode>
<PackageDescription>56 TABLET in 1 BOTTLE (50436-0250-7) </PackageDescription>
<NDC11Code>50436-0250-07</NDC11Code>
<ProductNDC>50436-0250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040876</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>37.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230404</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride, USP 37.5 mg is indicated as short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index greater than or equal to 30 kg/m2, or greater than or equal to 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. The limited usefulness of agents of this class, including Phentermine hydrochloride, [see CLINICAL PHARMACOLOGY (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride is a sympathomimetic amine anorectic. Its chemical name is α,α,-dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride is available as a capsule and tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride capsules, USP contain the inactive ingredients: corn starch, D&C Red #33, FD&C Blue #1, gelatin, lactose monohydrate, magnesium stearate and titanium dioxide. Phentermine hydrochloride tablets, USP contain the inactive ingredients: corn starch, FD&C blue #1, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pharmaceutical glaze, stearic acid, and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>15631-0250-2</NDCCode>
<PackageDescription>400 PELLET in 1 PACKAGE (15631-0250-2) </PackageDescription>
<NDC11Code>15631-0250-02</NDC11Code>
<ProductNDC>15631-0250</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kali Iodatum</ProprietaryName>
<NonProprietaryName>Kali Iodatum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150905</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>POTASSIUM IODIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37662-0250-2</NDCCode>
<PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (37662-0250-2) </PackageDescription>
<NDC11Code>37662-0250-02</NDC11Code>
<ProductNDC>37662-0250</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Chininum Sulphuricum</ProprietaryName>
<NonProprietaryName>Chininum Sulphuricum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220601</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>QUININE SULFATE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49288-0250-1</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (49288-0250-1)</PackageDescription>
<NDC11Code>49288-0250-01</NDC11Code>
<ProductNDC>49288-0250</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Haddock</ProprietaryName>
<NonProprietaryName>Haddock</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>HADDOCK</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fish Proteins, Dietary [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>49288-0250-2</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (49288-0250-2)</PackageDescription>
<NDC11Code>49288-0250-02</NDC11Code>
<ProductNDC>49288-0250</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Haddock</ProprietaryName>
<NonProprietaryName>Haddock</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>HADDOCK</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fish Proteins, Dietary [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>57955-0250-2</NDCCode>
<PackageDescription>1 BOTTLE, SPRAY in 1 CARTON (57955-0250-2) > 59 mL in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>57955-0250-02</NDC11Code>
<ProductNDC>57955-0250</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Anti Aging And Wrinkles For Women</ProprietaryName>
<NonProprietaryName>Abrotanum, Adrenalinum, Adrenocorticotrophin, Alpha-ketoglutaricum Acidum, Alpha-lipoicum Acidum, Baryta Carbonica, Calcarea Fluorica, Citricum Acidum, Coenzyme A, Dna, Ferrum Metallicum, Glandula Suprarenalis Suis, Hekla Lava, Helleborus Niger, Hypothalamus, Lycopodium Clavatum, Oophorinum, Rna, Secale Cornutum, Silicea, Thiaminum Hydrochloricum</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180205</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>King Bio Inc.</LabelerName>
<SubstanceName>ARTEMISIA ABROTANUM FLOWERING TOP; EPINEPHRINE; CORTICOTROPIN; .ALPHA.-KETOGLUTARIC ACID; .ALPHA.-LIPOIC ACID; BARIUM CARBONATE; CALCIUM FLUORIDE; ANHYDROUS CITRIC ACID; COENZYME A; HERRING SPERM DNA; IRON; SUS SCROFA ADRENAL GLAND; HEKLA LAVA; HELLEBORUS NIGER ROOT; BOS TAURUS HYPOTHALAMUS; LYCOPODIUM CLAVATUM SPORE; SUS SCROFA OVARY; SACCHAROMYCES CEREVISIAE RNA; CLAVICEPS PURPUREA SCLEROTIUM; SILICON DIOXIDE; THIAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10; 10; 30; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10; 10</StrengthNumber>
<StrengthUnit>[hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL; [hp_X]/59mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64656-0250-2</NDCCode>
<PackageDescription>30 L in 1 DEWAR (64656-0250-2)</PackageDescription>
<NDC11Code>64656-0250-02</NDC11Code>
<ProductNDC>64656-0250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19360101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED MEDICAL GAS</MarketingCategoryName>
<LabelerName>Mercy Home Care-HME</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>99</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>66219-0250-1</NDCCode>
<PackageDescription>1 BAG in 1 DRUM (66219-0250-1) > 25 kg in 1 BAG (66219-0250-2)</PackageDescription>
<NDC11Code>66219-0250-01</NDC11Code>
<ProductNDC>66219-0250</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Dyclonine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110412</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Changzhou Tianhua Pharmaceutical Co. Ltd.</LabelerName>
<SubstanceName>DYCLONINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>67370-0250-1</NDCCode>
<PackageDescription>1 BAG in 1 BOX (67370-0250-1) > 25 kg in 1 BAG (67370-0250-2)</PackageDescription>
<NDC11Code>67370-0250-01</NDC11Code>
<ProductNDC>67370-0250</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Dyclonine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20100519</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Santec Chemicals Corp.</LabelerName>
<SubstanceName>DYCLONINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>67995-0250-1</NDCCode>
<PackageDescription>1 BAG in 1 DRUM (67995-0250-1) > 25 kg in 1 BAG (67995-0250-2)</PackageDescription>
<NDC11Code>67995-0250-01</NDC11Code>
<ProductNDC>67995-0250</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Dyclonine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110412</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Yicheng Chemical Corp.</LabelerName>
<SubstanceName>DYCLONINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>69800-0250-1</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (69800-0250-1) / 50 mL in 1 VIAL, SINGLE-USE (69800-0250-2) </PackageDescription>
<NDC11Code>69800-0250-01</NDC11Code>
<ProductNDC>69800-0250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Asceniv</ProprietaryName>
<NonProprietaryName>Human Immunoglobulin G</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190401</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125590</ApplicationNumber>
<LabelerName>ADMA Biologics, Inc.</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ASCENIV is indicated for the treatment of primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. PI includes, but is not limited to, the humoral immune defect in congenital agammaglobulinemia, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies (SCID).</IndicationAndUsage>
<Description>ASCENIV (immune globulin intravenous, human - slra) is a purified, sterile, ready-to-use preparation of concentrated human immunoglobulin G (IgG) antibodies. The distribution of IgG subclasses is similar to that of normal plasma. The active ingredient is human immunoglobulin purified from source human plasma and processed using a modified classical Cohn Method 6 / Oncley Method 9 fractionation process as well as anion and cation exchange steps for added purification. ASCENIV contains 100 ± 10 mg/mL protein, of which not less than 96% is human immunoglobulin obtained from source human plasma. It is formulated in water for injection containing 0.100-0.140 M sodium chloride, 0.20-0.29 M glycine, 0.15–0.25% polysorbate 80, and pH 4.0–4.6. ASCENIV contains ≤ 200 µg/mL of IgA. Each plasma donation used for the manufacture of ASCENIV is collected from FDA-licensed facilities and undergoes rigorous testing. Plasma donations must test negative for hepatitis B virus (HBV) surface antigen (HBsAg), antibodies to human immunodeficiency virus (HIV) strains 1 and 2 (anti-HIV-1/2), and antibodies to the hepatitis C virus (anti-HCV) as determined by enzyme immune assay (EIA). In addition, each plasma unit must test negative and/or non-reactive for HIV RNA, HCV RNA, HBV DNA, Hepatitis A Virus (HAV) RNA, and Parvovirus B19 (B19 virus) DNA as determined by Nucleic Acid Amplification Testing (NAT) of plasma minipools. NAT is also performed on a sample of the manufacturing pool and must be negative and/or non-reactive for HIV RNA, HCV RNA, HBV DNA, and Hepatatis A Virus (HAV) RNA, and the limit for B19 virus DNA in a manufacturing pool is set not to exceed 10 4 IU/mL. The manufacturing process of ASCENIV employs six steps to remove/inactivate adventitious viruses to minimize the risk of virus transmission. The steps are "Precipitation and removal of fraction III" during cold ethanol fractionation, "Q-membrane filtration", "Solvent/detergent treatment" (TnBP / Triton X-100), "Anion exchange chromatography" and "virus filtration". In compliance with current guidelines, the steps have been separately validated in a series of in vitro experiments for their capacity to inactivate or remove both enveloped and non-enveloped viruses. Precipitation and removal of fraction III and Q-membrane filtration removes non-enveloped viruses, solvent/detergent treatment represents a virus inactivation step for enveloped viruses, Anion exchange chromatography binds enveloped and non-enveloped viruses, and virus filtration removes both enveloped and non-enveloped viruses by size exclusion. In addition to the steps above, low pH during several steps of the production process contributes to virus inactivation. The results of virus validation studies for the ASCENIV process are shown in Table 4, expressed as log 10 reduction factors.</Description>
</NDC>
<NDC>
<NDCCode>70000-0250-1</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (70000-0250-1) > 6 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>70000-0250-01</NDC11Code>
<ProductNDC>70000-0250</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Motion Sickness Relief</ProprietaryName>
<NonProprietaryName>Dimenhydrinate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19921201</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part336</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>DIMENHYDRINATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-04-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19921201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>71335-0250-2</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (71335-0250-2) </PackageDescription>
<NDC11Code>71335-0250-02</NDC11Code>
<ProductNDC>71335-0250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090564</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>850</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and pediatric patients 10 years of age and older with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below. Metformin hydrochloride, USP is a white to off-white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene chloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets, USP contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride. Each tablet contains the inactive ingredients povidone (K-30), Povidone (K-90), pregelatinized starch, and magnesium stearate. In addition, the coating for the tablet contains artificial blackberry flavor, hypromellose, macrogol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>75744-0250-2</NDCCode>
<PackageDescription>1000 L in 1 CONTAINER, FLEXIBLE INTERMEDIATE BULK (75744-0250-2) </PackageDescription>
<NDC11Code>75744-0250-02</NDC11Code>
<ProductNDC>75744-0250</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130929</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Grupo Insoma S.A.P.I de C.V.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>700</StrengthNumber>
<StrengthUnit>L/1000L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50436-0005-2</NDCCode>
<PackageDescription>200 POUCH in 1 CASE (50436-0005-2) > 2 TABLET, FILM COATED in 1 POUCH</PackageDescription>
<NDC11Code>50436-0005-02</NDC11Code>
<ProductNDC>50436-0005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil Citrate</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204883</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC],Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190313</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sildenafil tablets are phosphodiesterase-5 (PDE-5) inhibitor indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group I) in adults to improve exercise ability and delay clinical worsening. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with NYHA Functional Class II-III symptoms. Etiologies were idiopathic (71%) or associated with connective tissue disease (25%). (1). Limitation of Use: Adding sildenafil to bosentan therapy does not result in any beneficial effect on exercise capacity. (1, 14).</IndicationAndUsage>
<Description>Sildenafil Tablets, USP phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo [4,3-d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white or almost white, slightly hygroscopic crystalline powder. Slightly soluble in water & methanol, practically insoluble in hexane and a molecular weight of 666.7. Sildenafil tablets: Sildenafil tablets is white round, biconvex film coated tablets, debossed with R on one side and 20 on the other, containing sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate , each tablet contains the following inactive ingredients: Crospovidone, Hypromellose, Hydrophobic colloidal silica, Lactose monohydrate, Magnesium stearate, Microcrystalline cellulose, Titanium dioxide, and Triacetin.</Description>
</NDC>
<NDC>
<NDCCode>50436-0007-2</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (50436-0007-2)</PackageDescription>
<NDC11Code>50436-0007-02</NDC11Code>
<ProductNDC>50436-0007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolpidem Tartrate</ProprietaryName>
<NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077903</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>ZOLPIDEM TARTRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [CS],Central Nervous System Depression [PE]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Zolpidem tartrate tablets, USP a gamma-amino butyric acid (GABA) A agonist, are indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation.</IndicationAndUsage>
<Description>Zolpidem tartrate is a gamma-aminobutyric acid (GABA) A agonist of the imidazopyridine class and is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate, USP is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each zolpidem tartrate tablet, USP includes the following inactive ingredients: hypromellose, lactose monohydrate, microcrystalline cellulose, magnesium stearate, polyethylene glycol, sodium starch glycolate, titanium dioxide and ferric oxide red; the 10 mg tablet also contains ferric oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>50436-0009-2</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (50436-0009-2) </PackageDescription>
<NDC11Code>50436-0009-02</NDC11Code>
<ProductNDC>50436-0009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zolpidem</ProprietaryName>
<NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200924</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077214</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>ZOLPIDEM TARTRATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Depression [PE], GABA A Agonists [MoA], Pyridines [CS], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Zolpidem Tartrate Tablets is indicated for the short-term treatment of insomnia characterized by difficulties with sleep initiation. Zolpidem Tartrate Tablets has been shown to decrease sleep latency for up to 35 days in controlled clinical studies [see Clinical Studies (14)]. The clinical trials performed in support of efficacy were 4–5 weeks in duration with the final formal assessments of sleep latency performed at the end of treatment.</IndicationAndUsage>
<Description>Zolpidem Tartrate Tablets contains Zolpidem tartrate, a gamma-aminobutyric acid (GABA) A receptor positive modulator of the imidazopyridine class. Zolpidem Tartrate Tablets is available in 5 mg and 10 mg strength tablets for oral administration. Chemically, Zolpidem is N, N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem Tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Each Zolpidem Tartrate Tablet includes the following inactive ingredients: lactose anhydrous, sodium starch glycolate, colloidal silicon dioxide, microcrystalline cellulose, magnesium stearate. The 10 mg tablets also contain Opadry II (white) and the 5 mg tablets contain Opadry II (pink). Opadry II (white) contains hypromellose, polyeth ylene glycol, polydextrose, titanium dioxide, and triacetin. Opadry II (pink) contains hypromellose, FD&C Red no. 40 aluminum lake, FD&C Blue no. 2 aluminum lake, FD&C Yellow no. 6 aluminum lake, polyeth ylene glycol, polydextrose, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>50436-0018-2</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (50436-0018-2)</PackageDescription>
<NDC11Code>50436-0018-02</NDC11Code>
<ProductNDC>50436-0018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090778</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major Depressive Disorder [see Clinical Studies (14.1)], 2 Generalized Anxiety Disorder [see Clinical Studies (14.2)], 3 Diabetic Peripheral Neuropathy [see Clinical Studies (14.3)], 4 Chronic Musculoskeletal Pain [see Clinical Studies (14.5)].</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules are selective serotonin and norepinephrine reuptake inhibitor (SSNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride USP equivalent to 20, 30, or 60 mg of duloxetine, respectively. These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include crospovidone, hydroxy propyl cellulose, hypromellose, hypromellose phthalate, methylene chloride, sugar spheres, talc, titanium dioxide, and triethylcitrate. The empty hard gelatin capsule shells contain gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, the 20 mg and 60 mg contain FD&C Blue No. 2 and iron oxide yellow and 30 mg contains FD&C Blue No. 2. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>50436-0024-2</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (50436-0024-2) </PackageDescription>
<NDC11Code>50436-0024-02</NDC11Code>
<ProductNDC>50436-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glyburide And Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Glyburide And Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077870</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>GLYBURIDE; METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5; 500</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea [EPC],Sulfonylurea Compounds [CS],Biguanide [EPC],Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180927</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glyburide and metformin hydrochloride tablets, USP are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Glyburide and metformin hydrochloride tablets, USP contain 2 oral antihyperglycemic drugs used in the management of type 2 diabetes, glyburide USP and metformin hydrochloride USP.Glyburide USP is an oral antihyperglycemic drug of the sulfonylurea class. The chemical name for glyburide is 1-[[p-[2-(5-chloro-o-anisamido)ethyl]phenyl]sulfonyl]-3-cyclo-hexylurea. Glyburide USP is a white to off-white crystalline compound. The structural formula is represented below. Metformin hydrochloride USP is an oral antihyperglycemic drug used in the management of type 2 diabetes. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide monohydrochloride) is not chemically or pharmacologically related to sulfonylureas, thiazolidinediones, or α-glucosidase inhibitors. It is a white to off-white crystalline compound. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. The structural formula is as shown:. Glyburide and metformin hydrochloride tablets, USP are available for oral administration containing 1.25 mg glyburide USP with 250 mg metformin hydrochloride USP, 2.5 mg glyburide USP with 500 mg metformin hydrochloride USP, and 5 mg glyburide USP with 500 mg metformin hydrochloride USP. In addition, each film-coated tablet contains the following inactive ingredients: microcrystalline cellulose, croscarmellose sodium, povidone, magnesium stearate, hypromellose, propylene glycol, polysorbate 80, talc, titanium dioxide and FD&C Yellow#6 aluminum lake. The 1.25 mg/250 mg and 5 mg/500 mg strengths also contain D&C Yellow#10 aluminum lake; The 2.5 mg/500 mg strength also contains FD&C Red#40 aluminum lake. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>50436-0031-2</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (50436-0031-2) </PackageDescription>
<NDC11Code>50436-0031-02</NDC11Code>
<ProductNDC>50436-0031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065271</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amoxicillin capsules are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. (1.1 – 1.4), 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5).</IndicationAndUsage>
<Description>Formulation of amoxicillin capsules, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2S,5R,6R)-6-[(R)-(-)-2-amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as: The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.45. Each capsule of amoxicillin with blue cap and pink body, contains 250 mg or 500 mg amoxicillin USP as the trihydrate. The body of the 250 mg capsule is imprinted with ‘A44’ in black ink. The body of the 500 mg capsule is imprinted with ‘A45’ in black ink. Inactive ingredients: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>50436-0033-2</NDCCode>
<PackageDescription>1620 POUCH in 1 CASE (50436-0033-2) > 2 TABLET, FILM COATED in 1 POUCH</PackageDescription>
<NDC11Code>50436-0033-02</NDC11Code>
<ProductNDC>50436-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil</ProprietaryName>
<NonProprietaryName>Sildenafil Citrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120927</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021845</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210216</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sildenafil is indicated for the treatment of pulmonary arterial hypertension (WHO Group I) in adults to improve exercise ability and delay clinical worsening. The delay in clinical worsening was demonstrated when sildenafil was added to background epoprostenol therapy [see Clinical Studies (14)]. Studies establishing effectiveness were short-term (12 to 16 weeks), included predominately patients with New York Heart Association (NYHA) Functional Class II–III symptoms and idiopathic etiology (71%) or associated with connective tissue disease (CTD) (25%).</IndicationAndUsage>
<Description>Sildenafil, phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo [4,3-d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white to off-white crystalline powder with a solubility of 3.5 mg/mL in water and a molecular weight of 666.7. Sildenafil Tablets: Sildenafil is formulated as white, film-coated round tablets for oral administration. Each tablet contains sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate, each tablet contains the following inactive ingredients: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, magnesium stearate, hypromellose, titanium dioxide, lactose monohydrate, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>50436-0034-2</NDCCode>
<PackageDescription>2 TABLET, FILM COATED in 1 POUCH (50436-0034-2) </PackageDescription>
<NDC11Code>50436-0034-02</NDC11Code>
<ProductNDC>50436-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sildenafil</ProprietaryName>
<NonProprietaryName>Sildenafil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120927</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021845</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sildenafil is indicated for the treatment of pulmonary arterial hypertension (WHO Group I) in adults to improve exercise ability and delay clinical worsening. The delay in clinical worsening was demonstrated when sildenafil was added to background epoprostenol therapy [see Clinical Studies (14)]. Studies establishing effectiveness were short-term (12 to 16 weeks), and included predominately patients with New York Heart Association (NYHA) Functional Class II–III symptoms and idiopathic etiology (71%) or associated with connective tissue disease (CTD) (25%).</IndicationAndUsage>
<Description>Sildenafil, phosphodiesterase-5 (PDE-5) inhibitor, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type-5 (PDE-5). Sildenafil is also marketed as VIAGRA® for erectile dysfunction. Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo [4,3-d] pyrimidin-5-yl)-4-ethoxyphenyl] sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white to off-white crystalline powder with a solubility of 3.5 mg/mL in water and a molecular weight of 666.7. Sildenafil Tablets: Sildenafil is formulated as white, film-coated round tablets for oral administration. Each tablet contains sildenafil citrate equivalent to 20 mg of sildenafil. In addition to the active ingredient, sildenafil citrate, each tablet contains the following inactive ingredients: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, magnesium stearate, hypromellose, titanium dioxide, lactose monohydrate, and triacetin. Sildenafil for Oral Suspension: Sildenafil is supplied as white to off-white powders containing 1.57 g of sildenafil citrate (equivalent to 1.12 g sildenafil) in an amber glass bottle intended for reconstitution. Following reconstitution with 90 mL water, the volume of the oral suspension is 112 mL and the oral suspension contains 10 mg/mL sildenafil. The inactive ingredients include sorbitol, citric acid anhydrous, sucralose, sodium citrate dihydrate, xanthan gum, titanium dioxide, sodium benzoate, colloidal silicon dioxide anhydrous and grape flavor. In addition to the bottle, a press-in bottle adapter and an oral dosing syringe (with 0.5 mL and 2 mL dose markings) are provided.</Description>
</NDC>
<NDC>
<NDCCode>50436-0041-2</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (50436-0041-2) </PackageDescription>
<NDC11Code>50436-0041-02</NDC11Code>
<ProductNDC>50436-0041</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Etodolac</ProprietaryName>
<NonProprietaryName>Etodolac</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076004</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>ETODOLAC</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171011</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of etodolac and other treatment options before deciding to use etodolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Etodolac tablets, USP are indicated: 1 For acute and long-term use in the management of signs and symptoms of the following:Osteoarthritis Rheumatoid arthritis , 2 For the management of acute pain .</IndicationAndUsage>
<Description>Etodolac is a member of the pyranocarboxylic acid group of nonsteroidal anti-inflammatory drugs (NSAIDs). Etodolac is a racemic mixture of [+]S and [-]R-enantiomers. Etodolac is a white crystalline compound, insoluble in water but soluble in alcohols, chloroform, dimethyl sulfoxide, and aqueous polyethylene glycol. The chemical name is (±) 1,8-diethyl-1,3,4,9-tetrahydropyrano-[3,4-b]indole-1-acetic acid. The molecular weight of the base is 287.37. It has a pKa of 4.65 and an n-octanol:water partition coefficient of 11.4 at pH 7.4. The molecular formula for etodolac is C17H21NO3, and it has the following structural formula:. Each etodolac tablet, USP is for oral administration, contains 400 mg or 500 mg of etodolac. In addition, each tablet contains the following inactive ingredients: crospovidone, hydroxypropyl cellulose, hypromellose, magnesium stearate, methylcellulose, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>50436-0065-2</NDCCode>
<PackageDescription>60 CAPSULE, DELAYED RELEASE in 1 BOTTLE (50436-0065-2)</PackageDescription>
<NDC11Code>50436-0065-02</NDC11Code>
<ProductNDC>50436-0065</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20031111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076048</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Omeprazole is a proton pump inhibitor (PPI) indicated for the: : 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2), 3 Treatment of active benign gastric ulcer in adults (1.3), 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4), 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 month of age and older (1.5), 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6), 7 Pathologic hypersecretory conditions in adults (1.7).</IndicationAndUsage>
<Description>The active ingredient in omeprazole delayed-release capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole in the form of enteric-coated granules with the following inactive ingredients: magnesium hydroxide, mannitol, methacrylic acid copolymer dispersion, povidone and triethyl citrate. The capsule shells have the following inactive ingredients: D&C Red No. 28*, D&C Red No.33*, D&C Yellow No. 10*, FD&C Blue No. 1*, FD&C Red No. 40*, gelatin, iron oxide red* and titanium dioxide (*contains one or more of these ingredients). The capsule imprinting ink contains ammonium hydroxide, black iron oxide, ethyl alcohol, isopropyl alcohol, n-butyl alcohol, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
</NDCList>