RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>50742-496-26</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (50742-496-26)  / 26.3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>50742-0496-26</NDC11Code>
    <ProductNDC>50742-496</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gemcitabine</ProprietaryName>
    <NonProprietaryName>Gemcitabine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210383</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>38</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-04-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1), 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2), 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3), 4 as a single agent for the treatment of pancreatic cancer. (1.4).</IndicationAndUsage>
    <Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl, USP is 2´-. deoxy-2´,2´-difluorocytidine monohydrochloride (β-isomer).The structural formula is as follows. Gemcitabine HCl, USP is a white to off-white solid with a molecular formula of C9H11F2N3O4  HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 g, or 2 g of gemcitabine equivalent to 227.57 mg, 1.137 g, or 2.275 g of gemcitabine HCl, USP. Each mL contains 38 mg of gemcitabine free base in Water for Injection equivalent to 43.26 mg of gemcitabine HCl, USP. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-498-05</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (50742-498-05)  / 5.26 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>50742-0498-05</NDC11Code>
    <ProductNDC>50742-498</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gemcitabine</ProprietaryName>
    <NonProprietaryName>Gemcitabine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210383</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>38</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-04-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gemcitabine Injection is a nucleoside metabolic inhibitor indicated: 1 in combination with carboplatin, for the treatment of advanced ovarian cancer that has relapsed at least 6 months after completion of platinum-based therapy. (1.1), 2 in combination with paclitaxel, for first-line treatment of metastatic breast cancer after failure of prior anthracycline-containing adjuvant chemotherapy, unless anthracyclines were clinically contraindicated. (1.2), 3 in combination with cisplatin for the treatment of non-small cell lung cancer. (1.3), 4 as a single agent for the treatment of pancreatic cancer. (1.4).</IndicationAndUsage>
    <Description>Gemcitabine is a nucleoside metabolic inhibitor. The chemical name of gemcitabine HCl, USP is 2´-. deoxy-2´,2´-difluorocytidine monohydrochloride (β-isomer).The structural formula is as follows. Gemcitabine HCl, USP is a white to off-white solid with a molecular formula of C9H11F2N3O4  HCl and a molecular weight of 299.66 g/mol. It is soluble in water, slightly soluble in methanol, and practically insoluble in ethanol and polar organic solvents. Gemcitabine Injection is a sterile solution in single-dose vials for intravenous use. Each vial contains 200 mg, 1 g, or 2 g of gemcitabine equivalent to 227.57 mg, 1.137 g, or 2.275 g of gemcitabine HCl, USP. Each mL contains 38 mg of gemcitabine free base in Water for Injection equivalent to 43.26 mg of gemcitabine HCl, USP. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>0009-0047-26</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (0009-0047-26)  / 2 mL in 1 VIAL (0009-0047-27) </PackageDescription>
    <NDC11Code>00009-0047-26</NDC11Code>
    <ProductNDC>0009-0047</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Solu-medrol</ProprietaryName>
    <NonProprietaryName>Methylprednisolone Sodium Succinate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>19590402</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA011856</ApplicationNumber>
    <LabelerName>Pharmacia &amp; Upjohn Company LLC</LabelerName>
    <SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
    <StrengthNumber>125</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19590402</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of SOLU-MEDROL Sterile Powder is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
    <Description>SOLU-MEDROL Sterile Powder is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. SOLU-MEDROL is available in preservative and preservative-free formulations. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8.</Description>
  </NDC>
  <NDC>
    <NDCCode>43598-356-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (43598-356-30) </PackageDescription>
    <NDC11Code>43598-0356-30</NDC11Code>
    <ProductNDC>43598-356</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valganciclovir Hydrochloride</ProprietaryName>
    <NonProprietaryName>Valganciclovir Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20171212</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206876</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
    <SubstanceName>VALGANCICLOVIR HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>450</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytomegalovirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], DNA Polymerase Inhibitors [MoA], Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-12-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171212</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Valganciclovir tablets USP contains valganciclovir hydrochloride USP, a hydrochloride salt of the L-valyl ester of ganciclovir that exists as a mixture of two diastereomers. Ganciclovir is a synthetic guanine derivative active against CMV. Valganciclovir hydrochloride USP is available as a 450 mg tablet for oral administration. Each tablet contains 496.3 mg of valganciclovir hydrochloride USP (corresponding to 450 mg of valganciclovir), and the inactive ingredients colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose and povidone. The film-coat applied to the tablets contains hypromellose, iron oxide red, polyethylene glycol, polysorbate and titanium dioxide. Valganciclovir hydrochloride USP is a white to off-white powder, slightly hygroscopic with a molecular formula of C14H22N6O5 . HCl and a molecular weight of 390.82. The chemical name for valganciclovir hydrochloride USP is L-Valine,2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]-3-hydroxypropyl ester, monohydrochloride. Valganciclovir hydrochloride USP with solubility of 97 mg/mL in water at 25°C at a pH of 7.0 and an n-octanol/water partition coefficient of 0.0086 at pH 7.0. The pKa for valganciclovir hydrochloride USP is 7.5. The chemical structure of valganciclovir hydrochloride USP is. All doses in this insert are specified in terms of valganciclovir.</Description>
  </NDC>
  <NDC>
    <NDCCode>43598-356-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (43598-356-60) </PackageDescription>
    <NDC11Code>43598-0356-60</NDC11Code>
    <ProductNDC>43598-356</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valganciclovir Hydrochloride</ProprietaryName>
    <NonProprietaryName>Valganciclovir Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20171212</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206876</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Inc</LabelerName>
    <SubstanceName>VALGANCICLOVIR HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>450</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytomegalovirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], DNA Polymerase Inhibitors [MoA], Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-12-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171212</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Valganciclovir tablets USP contains valganciclovir hydrochloride USP, a hydrochloride salt of the L-valyl ester of ganciclovir that exists as a mixture of two diastereomers. Ganciclovir is a synthetic guanine derivative active against CMV. Valganciclovir hydrochloride USP is available as a 450 mg tablet for oral administration. Each tablet contains 496.3 mg of valganciclovir hydrochloride USP (corresponding to 450 mg of valganciclovir), and the inactive ingredients colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose and povidone. The film-coat applied to the tablets contains hypromellose, iron oxide red, polyethylene glycol, polysorbate and titanium dioxide. Valganciclovir hydrochloride USP is a white to off-white powder, slightly hygroscopic with a molecular formula of C14H22N6O5 . HCl and a molecular weight of 390.82. The chemical name for valganciclovir hydrochloride USP is L-Valine,2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]-3-hydroxypropyl ester, monohydrochloride. Valganciclovir hydrochloride USP with solubility of 97 mg/mL in water at 25°C at a pH of 7.0 and an n-octanol/water partition coefficient of 0.0086 at pH 7.0. The pKa for valganciclovir hydrochloride USP is 7.5. The chemical structure of valganciclovir hydrochloride USP is. All doses in this insert are specified in terms of valganciclovir.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-496-10</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 CARTON (46708-496-10)  / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>46708-0496-10</NDC11Code>
    <ProductNDC>46708-496</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213248</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1­ ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&amp;C Blue No. 2 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-496-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-496-30) </PackageDescription>
    <NDC11Code>46708-0496-30</NDC11Code>
    <ProductNDC>46708-496</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213248</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1­ ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&amp;C Blue No. 2 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-496-71</NDCCode>
    <PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (46708-496-71) </PackageDescription>
    <NDC11Code>46708-0496-71</NDC11Code>
    <ProductNDC>46708-496</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213248</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1­ ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&amp;C Blue No. 2 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-496-90</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (46708-496-90) </PackageDescription>
    <NDC11Code>46708-0496-90</NDC11Code>
    <ProductNDC>46708-496</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213248</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1­ ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&amp;C Blue No. 2 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-496-91</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (46708-496-91) </PackageDescription>
    <NDC11Code>46708-0496-91</NDC11Code>
    <ProductNDC>46708-496</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20230124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213248</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230124</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
    <Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1­ ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&amp;C Blue No. 2 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>49967-496-01</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (49967-496-01)  &gt; 50 mL in 1 TUBE</PackageDescription>
    <NDC11Code>49967-0496-01</NDC11Code>
    <ProductNDC>49967-496</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>La Roche Posay Laboratoire Dermatologique Anthelios 60 Face Light Fluid Sunscreen Broad Spectrum Spf 60 Water Resistant 80 Minutes</ProprietaryName>
    <NonProprietaryName>Avobenzone, Homosalate, Octisalate And Octocrylene</NonProprietaryName>
    <DosageFormName>LOTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20200501</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>L'Oreal USA Products Inc</LabelerName>
    <SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
    <StrengthNumber>30; 100; 50; 70</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-12-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200501</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>60429-846-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (60429-846-60) </PackageDescription>
    <NDC11Code>60429-0846-60</NDC11Code>
    <ProductNDC>60429-846</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valganciclovir</ProprietaryName>
    <NonProprietaryName>Valganciclovir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141104</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203511</ApplicationNumber>
    <LabelerName>Golden State Medical Supply, Inc.</LabelerName>
    <SubstanceName>VALGANCICLOVIR HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>450</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytomegalovirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], DNA Polymerase Inhibitors [MoA], Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Valganciclovir tablets USP contains valganciclovir hydrochloride USP, a hydrochloride salt of the L-valyl ester of ganciclovir that exists as a mixture of two diastereomers. Ganciclovir is a synthetic guanine derivative active against CMV. Valganciclovir hydrochloride USP is available as a 450 mg tablet for oral administration. Each tablet contains 496.3 mg of valganciclovir hydrochloride USP (corresponding to 450 mg of valganciclovir), and the inactive ingredients crospovidone, magnesium stearate, microcrystalline cellulose and povidone. The film-coat applied to the tablets contains hypromellose, iron oxide red, polyethylene glycol, polysorbate and titanium dioxide. Valganciclovir hydrochloride USP is a white to almost white powder with a molecular formula of C 14H 22N 6O 5·HCl and a molecular weight of 390.71. The chemical name for valganciclovir hydrochloride USP is L-Valine, 2[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]-3-hydroxypropyl ester, monohydrochloride. Valganciclovir hydrochloride USP is a polar hydrophilic compound with a saturation solubility of 6029 mg/mL in water at 25°C and an n-octanol/water partition coefficient of 0.00701 at pH 5.1. The pKa for valganciclovir hydrochloride USP is 7.2. The chemical structure of valganciclovir hydrochloride USP is. All doses in this insert are specified in terms of valganciclovir.</Description>
  </NDC>
  <NDC>
    <NDCCode>63629-2288-1</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (63629-2288-1) </PackageDescription>
    <NDC11Code>63629-2288-01</NDC11Code>
    <ProductNDC>63629-2288</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valganciclovir</ProprietaryName>
    <NonProprietaryName>Valganciclovir Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141104</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200790</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>VALGANCICLOVIR HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>450</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytomegalovirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], DNA Polymerase Inhibitors [MoA], Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-09-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Valganciclovir Tablets, USP are a deoxynucleoside analogue cytomegalovirus (CMV) DNA polymerase inhibitor indicated for. Adult Patients (1.1): 1 Treatment of CMV retinitis in patients with acquired immunodeficiency syndrome (AIDS)., 2 Prevention of CMV disease in kidney, heart, and kidney-pancreas transplant patients at high risk.</IndicationAndUsage>
    <Description>Valganciclovir Tablets, USP contains valganciclovir hydrochloride (valganciclovir HCl), a hydrochloride salt of the L-valyl ester of ganciclovir that exists as a mixture of two diastereomers. Ganciclovir is a synthetic guanine derivative active against CMV. Valganciclovir Tablets, USP is available as a 450 mg tablet for oral administration. Each tablet contains 496.3 mg of valganciclovir HCl (corresponding to 450 mg of valganciclovir), and the inactive ingredients colloidal silicon dioxide, crospovidone, microcrystalline cellulose, povidone K-30, and stearic acid. The film-coat applied to the tablets contains polyvinyl alcohol, titanium dioxide, polyethylene glycol, talc, and iron oxide red. Valganciclovir HCl is a white to off-white amorphous powder with a molecular formula of C14H22N6O5HCl and a molecular weight of 390.83. The chemical name for valganciclovir HCl is L-Valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]-3-hydroxypropyl ester, monohydrochloride. Valganciclovir HCl is a polar hydrophilic compound with a solubility of 70 mg/mL in water at 25°C at a pH of 7.0 and an n-octanol/water partition coefficient of 0.0095 at pH 7.0. The pKa for valganciclovir HCl is 7.6. The chemical structure of valganciclovir HCl is. All doses in this insert are specified in terms of valganciclovir.</Description>
  </NDC>
  <NDC>
    <NDCCode>68084-965-19</NDCCode>
    <PackageDescription>20 BLISTER PACK in 1 CARTON (68084-965-19)  / 1 TABLET, FILM COATED in 1 BLISTER PACK (68084-965-18) </PackageDescription>
    <NDC11Code>68084-0965-19</NDC11Code>
    <ProductNDC>68084-965</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valganciclovir</ProprietaryName>
    <NonProprietaryName>Valganciclovir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203511</ApplicationNumber>
    <LabelerName>American Health Packaging</LabelerName>
    <SubstanceName>VALGANCICLOVIR HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>450</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytomegalovirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], DNA Polymerase Inhibitors [MoA], Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241106</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Valganciclovir tablet is a deoxynucleoside analogue cytomegalovirus (CMV) DNA polymerase inhibitor indicated for. Adult Patients(1.1): 1 Treatment of CMV retinitis in patients with acquired immunodeficiency syndrome (AIDS)., 2 Prevention of CMV disease in kidney, heart, and kidney-pancreas transplant patients at high risk.</IndicationAndUsage>
    <Description>Valganciclovir tablets USP contains valganciclovir hydrochloride USP, a hydrochloride salt of the L-valyl ester of ganciclovir that exists as a mixture of two diastereomers. Ganciclovir is a synthetic guanine derivative active against CMV. Valganciclovir hydrochloride USP is available as a 450 mg tablet for oral administration. Each tablet contains 496.3 mg of valganciclovir hydrochloride USP (corresponding to 450 mg of valganciclovir), and the inactive ingredients crospovidone, magnesium stearate, microcrystalline cellulose and povidone. The film-coat applied to the tablets contains hypromellose, iron oxide red, polyethylene glycol, polysorbate and titanium dioxide. Valganciclovir hydrochloride USP is a white to almost white powder with a molecular formula of C 14H 22N 6O 5HCl and a molecular weight of 390.71. The chemical name for valganciclovir hydrochloride USP is L-Valine, 2[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]-3-hydroxypropyl ester, monohydrochloride. Valganciclovir hydrochloride USP is a polar hydrophilic compound with a saturation solubility of 6029 mg/mL in water at 25°C and an n-octanol/water partition coefficient of 0.00701 at pH 5.1. The pKa for valganciclovir hydrochloride USP is 7.2. The chemical structure of valganciclovir hydrochloride USP is. All doses in this insert are specified in terms of valganciclovir.</Description>
  </NDC>
  <NDC>
    <NDCCode>68084-965-25</NDCCode>
    <PackageDescription>30 BLISTER PACK in 1 BOX, UNIT-DOSE (68084-965-25)  / 1 TABLET, FILM COATED in 1 BLISTER PACK (68084-965-95) </PackageDescription>
    <NDC11Code>68084-0965-25</NDC11Code>
    <ProductNDC>68084-965</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valganciclovir</ProprietaryName>
    <NonProprietaryName>Valganciclovir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150116</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203511</ApplicationNumber>
    <LabelerName>American Health Packaging</LabelerName>
    <SubstanceName>VALGANCICLOVIR HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>450</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytomegalovirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], DNA Polymerase Inhibitors [MoA], Nucleoside Analog Antiviral [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150116</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Valganciclovir tablet is a deoxynucleoside analogue cytomegalovirus (CMV) DNA polymerase inhibitor indicated for. Adult Patients(1.1): 1 Treatment of CMV retinitis in patients with acquired immunodeficiency syndrome (AIDS)., 2 Prevention of CMV disease in kidney, heart, and kidney-pancreas transplant patients at high risk.</IndicationAndUsage>
    <Description>Valganciclovir tablets USP contains valganciclovir hydrochloride USP, a hydrochloride salt of the L-valyl ester of ganciclovir that exists as a mixture of two diastereomers. Ganciclovir is a synthetic guanine derivative active against CMV. Valganciclovir hydrochloride USP is available as a 450 mg tablet for oral administration. Each tablet contains 496.3 mg of valganciclovir hydrochloride USP (corresponding to 450 mg of valganciclovir), and the inactive ingredients crospovidone, magnesium stearate, microcrystalline cellulose and povidone. The film-coat applied to the tablets contains hypromellose, iron oxide red, polyethylene glycol, polysorbate and titanium dioxide. Valganciclovir hydrochloride USP is a white to almost white powder with a molecular formula of C 14H 22N 6O 5HCl and a molecular weight of 390.71. The chemical name for valganciclovir hydrochloride USP is L-Valine, 2[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]-3-hydroxypropyl ester, monohydrochloride. Valganciclovir hydrochloride USP is a polar hydrophilic compound with a saturation solubility of 6029 mg/mL in water at 25°C and an n-octanol/water partition coefficient of 0.00701 at pH 5.1. The pKa for valganciclovir hydrochloride USP is 7.2. The chemical structure of valganciclovir hydrochloride USP is. All doses in this insert are specified in terms of valganciclovir.</Description>
  </NDC>
  <NDC>
    <NDCCode>71205-496-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (71205-496-30) </PackageDescription>
    <NDC11Code>71205-0496-30</NDC11Code>
    <ProductNDC>71205-496</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atenolol</ProprietaryName>
    <NonProprietaryName>Atenolol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19920124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA073457</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>ATENOLOL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-11-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201023</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
    <Description>Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 2-[p-[2-Hydroxy-3-(isopropylamino)propoxy]phenyl]acetamide. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets are available as 25, 50 and 100 mg tablets for oral administration. Inactive Ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and sodium starch glycolate (potato).</Description>
  </NDC>
  <NDC>
    <NDCCode>71205-496-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (71205-496-60) </PackageDescription>
    <NDC11Code>71205-0496-60</NDC11Code>
    <ProductNDC>71205-496</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atenolol</ProprietaryName>
    <NonProprietaryName>Atenolol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19920124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA073457</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>ATENOLOL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-11-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201023</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
    <Description>Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 2-[p-[2-Hydroxy-3-(isopropylamino)propoxy]phenyl]acetamide. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets are available as 25, 50 and 100 mg tablets for oral administration. Inactive Ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and sodium starch glycolate (potato).</Description>
  </NDC>
  <NDC>
    <NDCCode>71205-496-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (71205-496-90) </PackageDescription>
    <NDC11Code>71205-0496-90</NDC11Code>
    <ProductNDC>71205-496</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atenolol</ProprietaryName>
    <NonProprietaryName>Atenolol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19920124</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA073457</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>ATENOLOL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2020-11-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201023</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
    <Description>Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 2-[p-[2-Hydroxy-3-(isopropylamino)propoxy]phenyl]acetamide. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets are available as 25, 50 and 100 mg tablets for oral administration. Inactive Ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate and sodium starch glycolate (potato).</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-323-60</NDCCode>
    <PackageDescription>12 POUCH in 1 CARTON (50742-323-60)  / 5 VIAL in 1 POUCH (50742-323-05)  / .2 mL in 1 VIAL</PackageDescription>
    <NDC11Code>50742-0323-60</NDC11Code>
    <ProductNDC>50742-323</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate</ProprietaryName>
    <NonProprietaryName>Dorzolamide Hydrochloride And Timolol Maleate</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20230502</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217260</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>DORZOLAMIDE HYDROCHLORIDE; TIMOLOL MALEATE</SubstanceName>
    <StrengthNumber>20; 5</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], Carbonic Anhydrase Inhibitor [EPC], Carbonic Anhydrase Inhibitors [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230502</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dorzolamide hydrochloride and timolol maleate ophthalmic solution (preservative free) is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension who are insufficiently responsive to beta-blockers (failed to achieve target IOP determined after multiple measurements over time). The IOP-lowering of dorzolamide hydrochloride and timolol maleate ophthalmic solution administered twice a day was slightly less than that seen with the concomitant administration of 0.5% timolol administered twice a day and 2% dorzolamide administered three times a day [see Clinical Studies (14.1)].</IndicationAndUsage>
    <Description>Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) is the combination of a topical carbonic anhydrase inhibitor and a topical beta-adrenergic receptor blocking agent. Dorzolamide hydrochloride, USP is described chemically as: (4S-trans)-4-(ethylamino)-5,6-dihydro-6methyl-4H-thieno[2,3-b]thiopyran-2-sulfonamide 7,7-dioxide monohydrochloride. Dorzolamide hydrochloride is optically active. The specific rotation is. Its empirical formula is C10H16N2O4S3HCl and its structural formula is. Dorzolamide hydrochloride, USP has a molecular weight of 360.91. It is a white or almost white crystalline powder, which is soluble in water and slightly soluble in methanol and very slightly soluble in anhydrous ethanol. Timolol maleate, USP is described chemically as: (-)-1-(tert-butylamino)-3-[(4-morpholino-1,2,5thiadiazol-3-yl)oxy]-2-propanol maleate (1:1) (salt). Timolol maleate, USP possesses an asymmetric carbon atom in its structure and is provided as the levo-isomer. The optical rotation of timolol maleate is. Its molecular formula is C13H24N4O3SC4H4O4 and its structural formula is. Timolol maleate, USP has a molecular weight of 432.50. It is a white, or practically white, odorless or practically odorless powder which is soluble in water, in alcohol, and in methanol; sparingly soluble in chloroform and in propylene glycol; insoluble in ether and in cyclohexane. Timolol maleate, USP is stable at room temperature. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) is supplied as a sterile, clear, colorless to nearly colorless, isotonic, buffered, slightly viscous, aqueous solution. The pH of the solution is approximately 5.65, and the osmolarity is 242 - 323 mOsM. Each mL of dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) contains 20 mg dorzolamide (22.26 mg of dorzolamide hydrochloride) and 5 mg timolol (6.83 mg timolol maleate). Inactive ingredients are sodium citrate dihydrate, hydroxyethyl cellulose, sodium hydroxide, mannitol, and water for injection. Dorzolamide hydrochloride and timolol maleate ophthalmic solution, USP (preservative free) does not contain a preservative.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-331-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (50742-331-30) </PackageDescription>
    <NDC11Code>50742-0331-30</NDC11Code>
    <ProductNDC>50742-331</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220310</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213444</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.375</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220310</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride extended- release tablet is a non-ergot dopamine agonist indicated for the treatment of Parkinson's disease (PD) (1).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride extended-release tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is (S)-2-amino-4,5,6,7- tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 2.25 mg. Each extended-release tablet contains 2.25 mg pramipexole dihydrochloride monohydrate equivalent to 2.12 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3.75 mg. Each extended-release tablet contains 3.75 mg pramipexole dihydrochloride monohydrate equivalent to 3.53 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg pramipexole dihydrochloride. Inactive ingredients for all strengths of Pramipexole dihydrochloride extended-release tablets consist of hypromellose, corn starch, microcrystalline cellulose, sodium lauryl sulfate, sodium metabisulfite and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-332-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (50742-332-30) </PackageDescription>
    <NDC11Code>50742-0332-30</NDC11Code>
    <ProductNDC>50742-332</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220310</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213444</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>.75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220310</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride extended- release tablet is a non-ergot dopamine agonist indicated for the treatment of Parkinson's disease (PD) (1).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride extended-release tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is (S)-2-amino-4,5,6,7- tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 2.25 mg. Each extended-release tablet contains 2.25 mg pramipexole dihydrochloride monohydrate equivalent to 2.12 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3.75 mg. Each extended-release tablet contains 3.75 mg pramipexole dihydrochloride monohydrate equivalent to 3.53 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg pramipexole dihydrochloride. Inactive ingredients for all strengths of Pramipexole dihydrochloride extended-release tablets consist of hypromellose, corn starch, microcrystalline cellulose, sodium lauryl sulfate, sodium metabisulfite and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-333-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (50742-333-30) </PackageDescription>
    <NDC11Code>50742-0333-30</NDC11Code>
    <ProductNDC>50742-333</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220310</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213444</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220310</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride extended- release tablet is a non-ergot dopamine agonist indicated for the treatment of Parkinson's disease (PD) (1).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride extended-release tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is (S)-2-amino-4,5,6,7- tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 2.25 mg. Each extended-release tablet contains 2.25 mg pramipexole dihydrochloride monohydrate equivalent to 2.12 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3.75 mg. Each extended-release tablet contains 3.75 mg pramipexole dihydrochloride monohydrate equivalent to 3.53 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg pramipexole dihydrochloride. Inactive ingredients for all strengths of Pramipexole dihydrochloride extended-release tablets consist of hypromellose, corn starch, microcrystalline cellulose, sodium lauryl sulfate, sodium metabisulfite and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-334-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (50742-334-30) </PackageDescription>
    <NDC11Code>50742-0334-30</NDC11Code>
    <ProductNDC>50742-334</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220310</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213444</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2.25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220310</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride extended- release tablet is a non-ergot dopamine agonist indicated for the treatment of Parkinson's disease (PD) (1).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride extended-release tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is (S)-2-amino-4,5,6,7- tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 2.25 mg. Each extended-release tablet contains 2.25 mg pramipexole dihydrochloride monohydrate equivalent to 2.12 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3.75 mg. Each extended-release tablet contains 3.75 mg pramipexole dihydrochloride monohydrate equivalent to 3.53 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg pramipexole dihydrochloride. Inactive ingredients for all strengths of Pramipexole dihydrochloride extended-release tablets consist of hypromellose, corn starch, microcrystalline cellulose, sodium lauryl sulfate, sodium metabisulfite and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-335-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (50742-335-30) </PackageDescription>
    <NDC11Code>50742-0335-30</NDC11Code>
    <ProductNDC>50742-335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220310</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213444</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220310</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride extended- release tablet is a non-ergot dopamine agonist indicated for the treatment of Parkinson's disease (PD) (1).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride extended-release tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is (S)-2-amino-4,5,6,7- tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 2.25 mg. Each extended-release tablet contains 2.25 mg pramipexole dihydrochloride monohydrate equivalent to 2.12 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3.75 mg. Each extended-release tablet contains 3.75 mg pramipexole dihydrochloride monohydrate equivalent to 3.53 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg pramipexole dihydrochloride. Inactive ingredients for all strengths of Pramipexole dihydrochloride extended-release tablets consist of hypromellose, corn starch, microcrystalline cellulose, sodium lauryl sulfate, sodium metabisulfite and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-336-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (50742-336-30) </PackageDescription>
    <NDC11Code>50742-0336-30</NDC11Code>
    <ProductNDC>50742-336</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220310</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213444</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>3.75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220310</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride extended- release tablet is a non-ergot dopamine agonist indicated for the treatment of Parkinson's disease (PD) (1).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride extended-release tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is (S)-2-amino-4,5,6,7- tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 2.25 mg. Each extended-release tablet contains 2.25 mg pramipexole dihydrochloride monohydrate equivalent to 2.12 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3.75 mg. Each extended-release tablet contains 3.75 mg pramipexole dihydrochloride monohydrate equivalent to 3.53 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg pramipexole dihydrochloride. Inactive ingredients for all strengths of Pramipexole dihydrochloride extended-release tablets consist of hypromellose, corn starch, microcrystalline cellulose, sodium lauryl sulfate, sodium metabisulfite and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-337-30</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (50742-337-30) </PackageDescription>
    <NDC11Code>50742-0337-30</NDC11Code>
    <ProductNDC>50742-337</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pramipexole Dihydrochloride</ProprietaryName>
    <NonProprietaryName>Pramipexole Dihydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220310</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213444</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>PRAMIPEXOLE DIHYDROCHLORIDE</SubstanceName>
    <StrengthNumber>4.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220310</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pramipexole dihydrochloride extended- release tablet is a non-ergot dopamine agonist indicated for the treatment of Parkinson's disease (PD) (1).</IndicationAndUsage>
    <Description>Pramipexole dihydrochloride extended-release tablets contain pramipexole dihydrochloride (as a monohydrate). Pramipexole is a non-ergot dopamine agonist. The chemical name of pramipexole dihydrochloride monohydrate is (S)-2-amino-4,5,6,7- tetrahydro-6-(propylamino)benzothiazole dihydrochloride monohydrate. Its empirical formula is C10 H17 N3 S · 2HCl · H2O, and its molecular weight is 302.26. The structural formula is. Pramipexole dihydrochloride is a white to off-white powder substance. Melting occurs in the range of 296°C to 301°C, with decomposition. Pramipexole dihydrochloride is more than 20% soluble in water, about 8% in methanol, about 0.5% in ethanol, and practically insoluble in dichloromethane. Pramipexole dihydrochloride extended-release tablets 0.375 mg. Each extended-release tablet contains 0.375 mg pramipexole dihydrochloride monohydrate equivalent to 0.352 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 0.75 mg. Each extended-release tablet contains 0.75 mg pramipexole dihydrochloride monohydrate equivalent to 0.705 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 1.5 mg. Each extended-release tablet contains 1.5 mg pramipexole dihydrochloride monohydrate equivalent to 1.41 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 2.25 mg. Each extended-release tablet contains 2.25 mg pramipexole dihydrochloride monohydrate equivalent to 2.12 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3 mg. Each extended-release tablet contains 3 mg pramipexole dihydrochloride monohydrate equivalent to 2.82 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 3.75 mg. Each extended-release tablet contains 3.75 mg pramipexole dihydrochloride monohydrate equivalent to 3.53 mg pramipexole dihydrochloride. Pramipexole dihydrochloride extended-release tablets 4.5 mg. Each extended-release tablet contains 4.5 mg pramipexole dihydrochloride monohydrate equivalent to 4.23 mg pramipexole dihydrochloride. Inactive ingredients for all strengths of Pramipexole dihydrochloride extended-release tablets consist of hypromellose, corn starch, microcrystalline cellulose, sodium lauryl sulfate, sodium metabisulfite and magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-431-08</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (50742-431-08)  / 8 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>50742-0431-08</NDC11Code>
    <ProductNDC>50742-431</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Docetaxel</ProprietaryName>
    <NonProprietaryName>Docetaxel Anhydrous</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170907</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207563</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170907</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Docetaxel  Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC):single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC):single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC):with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC):with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN):with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).</IndicationAndUsage>
    <Description>Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous), 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid USP, 23% v/v dehydrated alcohol USP, and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-447-45</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (50742-447-45)  / 45 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>50742-0447-45</NDC11Code>
    <ProductNDC>50742-447</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Carboplatin</ProprietaryName>
    <NonProprietaryName>Carboplatin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208487</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>CARBOPLATIN</SubstanceName>
    <StrengthNumber>450</StrengthNumber>
    <StrengthUnit>mg/45mL</StrengthUnit>
    <Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Initial Treatment of Advanced Ovarian Carcinoma. Carboplatin injection is indicated for the initial treatment of advanced ovarian carcinoma in established combination with other approved chemotherapeutic agents. One established combination regimen consists of carboplatin and cyclophosphamide. Two randomized controlled studies conducted by the NCIC and SWOG with carboplatin versus cisplatin, both in combination with cyclophosphamide, have demonstrated equivalent overall survival between the two groups (see CLINICAL STUDIES). There is limited statistical power to demonstrate equivalence in overall pathologic complete response rates and long-term survival (≥ 3 years) because of the small number of patients with these outcomes: the small number of patients with residual tumor &lt; 2 cm after initial surgery also limits the statistical power to demonstrate equivalence in this subgroup. Secondary Treatment of Advanced Ovarian Carcinoma. Carboplatin injection is indicated for the palliative treatment of patients with ovarian carcinoma recurrent after prior chemotherapy, including patients who have been previously treated with cisplatin. Within the group of patients previously treated with cisplatin, those who have developed progressive disease while receiving cisplatin therapy may have a decreased response rate.</IndicationAndUsage>
    <Description>Carboplatin injection, USP is supplied as a sterile, pyrogen-free, 10 mg/mL aqueous solution of carboplatin, USP. Carboplatin, USP is a platinum coordination compound. The chemical name for carboplatin, USP is platinum, diammine [1,1-cyclobutanedicarboxylato(2-)-0,0']-,(SP-4-2), and carboplatin, USP has the following structural formula.   C6H12N2O4 Pt M.W. 371.25. Carboplatin, USP is a crystalline powder. It is soluble in water at a rate of approximately 14 mg/mL, and the pH of a 1% solution is 5 to 7. It is virtually insoluble in ethanol, acetone, and dimethylacetamide.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-448-60</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (50742-448-60)  / 60 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>50742-0448-60</NDC11Code>
    <ProductNDC>50742-448</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Carboplatin</ProprietaryName>
    <NonProprietaryName>Carboplatin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208487</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>CARBOPLATIN</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/60mL</StrengthUnit>
    <Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Initial Treatment of Advanced Ovarian Carcinoma. Carboplatin injection is indicated for the initial treatment of advanced ovarian carcinoma in established combination with other approved chemotherapeutic agents. One established combination regimen consists of carboplatin and cyclophosphamide. Two randomized controlled studies conducted by the NCIC and SWOG with carboplatin versus cisplatin, both in combination with cyclophosphamide, have demonstrated equivalent overall survival between the two groups (see CLINICAL STUDIES). There is limited statistical power to demonstrate equivalence in overall pathologic complete response rates and long-term survival (≥ 3 years) because of the small number of patients with these outcomes: the small number of patients with residual tumor &lt; 2 cm after initial surgery also limits the statistical power to demonstrate equivalence in this subgroup. Secondary Treatment of Advanced Ovarian Carcinoma. Carboplatin injection is indicated for the palliative treatment of patients with ovarian carcinoma recurrent after prior chemotherapy, including patients who have been previously treated with cisplatin. Within the group of patients previously treated with cisplatin, those who have developed progressive disease while receiving cisplatin therapy may have a decreased response rate.</IndicationAndUsage>
    <Description>Carboplatin injection, USP is supplied as a sterile, pyrogen-free, 10 mg/mL aqueous solution of carboplatin, USP. Carboplatin, USP is a platinum coordination compound. The chemical name for carboplatin, USP is platinum, diammine [1,1-cyclobutanedicarboxylato(2-)-0,0']-,(SP-4-2), and carboplatin, USP has the following structural formula.   C6H12N2O4 Pt M.W. 371.25. Carboplatin, USP is a crystalline powder. It is soluble in water at a rate of approximately 14 mg/mL, and the pH of a 1% solution is 5 to 7. It is virtually insoluble in ethanol, acetone, and dimethylacetamide.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-463-16</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (50742-463-16)  / 16 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>50742-0463-16</NDC11Code>
    <ProductNDC>50742-463</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Docetaxel</ProprietaryName>
    <NonProprietaryName>Docetaxel Anhydrous</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170907</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207563</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>DOCETAXEL ANHYDROUS</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170907</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Docetaxel  Injection is a microtubule inhibitor indicated for: 1 Breast Cancer (BC):single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC):single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC):with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC):with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN):with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).</IndicationAndUsage>
    <Description>Docetaxel is an antineoplastic agent belonging to the taxoid family. It is prepared by semisynthesis beginning with a precursor extracted from the renewable needle biomass of yew plants. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β-20-epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel (anhydrous) has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.88. It is highly lipophilic and practically insoluble in water. Docetaxel Injection, USP is a sterile, non-pyrogenic, clear, colorless to pale yellow solution at 10 mg/mL concentration. Each mL contains 10 mg docetaxel (anhydrous), 260 mg polysorbate 80 NF, 4 mg anhydrous citric acid USP, 23% v/v dehydrated alcohol USP, and polyethylene glycol 300 NF. Docetaxel Injection is available in single-dose vials containing 20 mg (2 mL) docetaxel (anhydrous), and multiple-dose vials containing 80 mg (8 mL) or 160 mg (16 mL) docetaxel (anhydrous). Docetaxel Injection requires NO prior dilution with a diluent and is ready to add to the infusion solution.</Description>
  </NDC>
</NDCList>