{
"NDC": [
{
"NDCCode": "51004-4411-6",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-4411-6) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-4411-06",
"ProductNDC": "51004-4411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polocaine",
"NonProprietaryName": "Mepivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "19841010",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088387",
"LabelerName": "Novocol Pharmaceutical of Canada Inc.",
"SubstanceName": "MEPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19841010",
"SamplePackage": "N",
"IndicationAndUsage": "Mepivacaine is indicated for production of local anesthesia for dental procedures by infiltration or nerve block in adults and pediatric patients.",
"Description": "Mepivacaine Hydrochloride, a tertiary amine used as a local anesthetic, is 1-methyl-2,' 6' - pipecoloxylidide monohydrochloride with the following structural formula. It is a white, crystalline, odorless powder soluble in water, but very resistant to both acid and alkaline hydrolysis. Levonordefrin, a sympathomimetic amine used as a vasoconstrictor in local anesthetic solution, is (-)-α-(1-Aminoethyl)-3, 4-dihydroxybenzyl alcohol with the following structural formula. It is a white or buff-colored crystalline solid, freely soluble in aqueous solutions of mineral acids, but practically insoluble in water. DENTAL CARTRIDGES MAY NOT BE AUTOCLAVED. 3% (30 mg/mL) Polocaine® DENTAL (mepivacaine hydrochloride injection 3% (30 mg/mL)) and 2% (20 mg/mL) Polocaine® DENTAL with Levonordefrin 1:20,000 (mepivacaine hydrochloride 2% (20 mg/mL) with levonordefrin 1:20,000 injection) are sterile solutions for injection."
},
{
"NDCCode": "68071-4411-6",
"PackageDescription": "60 TABLET, EXTENDED RELEASE in 1 BOTTLE (68071-4411-6) ",
"NDC11Code": "68071-4411-06",
"ProductNDC": "68071-4411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nifedipine",
"NonProprietaryName": "Nifedipine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202987",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "NIFEDIPINE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180430",
"SamplePackage": "N",
"IndicationAndUsage": "Nifedipine extended-release tablets, USP are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Nifedipine extended-release tablets, USP are an extended release tablet dosage form of the calcium channel blocker nifedipine. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-dimethyl ester, C 17H 18N 2O 6, and has the structural formula:. USP dissolution test is pending. Nifedipine is a yellow crystalline substance, practically insoluble in water but soluble in ethanol. It has a molecular weight of 346.3. Nifedipine extendedrelease tablets contain either: 30, 60, or 90 mg of nifedipine for once-a-day oral administration. Inert ingredients in the 30mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, talc, titanium dioxide, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide yellow and iron oxide black. Inert ingredients in the 60mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, titanium dioxide, talc, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide red, iron oxide black and iron oxide yellow. Inert ingredients in the 90mg nifedipine extended-release tablet formulation are: lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, iron oxide red, talc, macrogol/polyethylene glycol 3350, iron oxide yellow, titanium dioxide, lecithin (soy) and iron oxide black."
},
{
"NDCCode": "51004-1095-6",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-1095-6) > 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-1095-06",
"ProductNDC": "51004-1095",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lignospan Standard",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20111015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088390",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "20; .01",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE],Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "LIGNOSPAN Solutions are indicated for the production of local anesthesia for dental procedures by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.",
"Description": "LIGNOSPAN FORTE and LIGNOSPAN STANDARD are sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula. Epinephrine is ( - )-3,4-Dihydroxy- -[(Methylamino) methyl] benzyl alcohol and has the following structural formula."
},
{
"NDCCode": "51004-5801-6",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-5801-6) / 1.8 mL in 1 CARTRIDGE",
"NDC11Code": "51004-5801-06",
"ProductNDC": "51004-5801",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citanest Forte Dental",
"NonProprietaryName": "Prilocaine Hcl And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20171204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078959",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "PRILOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "40; .005",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171204",
"SamplePackage": "N",
"IndicationAndUsage": "Citanest Forte is indicated for the production of local anesthesia in dentistry by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.",
"Description": "4% Citanest® Forte DENTAL with Epinephrine 1:200,000 (Citanest Forte), Prilocaine HCl 4% (72 mg/1.8 mL) (40 mg/mL) with Epinephrine 1:200,000 Injection, is a sterile, non-pyrogenic isotonic solution that contains a local anesthetic agent with epinephrine (as bitartrate) and is administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. The quantitative composition is shown in Table 1. Citanest Forte contains prilocaine HCl, which is chemically designated as propanamide, N-(2-methyl-phenyl) -2- (propylamino)-, monohydrochloride and has the following structural formula. and epinephrine, which is (-) -3, 4-Dihydroxy- ∝ -[(methylamino) methyl] benzyl alcohol and has the following structural formula. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration. The specific quantitative composition is shown in Table 1."
},
{
"NDCCode": "51004-0005-3",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-0005-3) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-0005-03",
"ProductNDC": "51004-0005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mepivacaine",
"NonProprietaryName": "Mepivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20150410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088387",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "MEPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150410",
"SamplePackage": "N",
"IndicationAndUsage": "Mepivacaine is indicated for production of local anesthesia for dental procedures by infiltration or nerve block in adults and pediatric patients.",
"Description": "Mepivacaine Hydrochloride, a tertiary amine used as a local anesthetic, is 1-methyl-2', 6' - pipecoloxylidide monohydrochloride with the following structural formula. It is a white, crystalline, odorless powder soluble in water, but very resistant to both acid and alkaline hydrolysis. Levonordefrin, a sympathomimetic amine used as a vasoconstrictor in local anesthetic solution, is (-)--(1-Aminoethyl)-3, 4-dihydroxybenzyl alcohol with the following structural formula. It is a white or buff-colored crystalline solid, freely soluble in aqueous solutions of mineral acids, but practically insoluble in water;. DENTAL CARTRIDGES MAY NOT BE AUTOCLAVED. Mepivacaine hydrochloride injection 3% (30 mg/mL) and Mepivacaine hydrochloride 2% (20 mg/mL) with levonordefrin 1:20,000 injection are sterile solutions for injection."
},
{
"NDCCode": "51004-0102-5",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-0102-5) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-0102-05",
"ProductNDC": "51004-0102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Articaine",
"NonProprietaryName": "Articaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20151204",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020971",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "40; .005",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151204",
"SamplePackage": "N",
"IndicationAndUsage": "Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.",
"Description": "Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide."
},
{
"NDCCode": "51004-0550-5",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-0550-5) > 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-0550-05",
"ProductNDC": "51004-0550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20111107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088389",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "20; .02",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE],Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lidocaine and Epinephrine Injection, USP is indicated for the production of local anesthesia for dental procedures by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.",
"Description": "Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula. Epinephrine is ( - )-3,4-Dihydroxy- -[(Methylamino) methyl] benzyl alcohol and has the following structural formula."
},
{
"NDCCode": "51004-1010-5",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-1010-5) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-1010-05",
"ProductNDC": "51004-1010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Articaine",
"NonProprietaryName": "Articaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20150622",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020971",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "40; .01",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150622",
"SamplePackage": "N",
"IndicationAndUsage": "Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.",
"Description": "Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide."
},
{
"NDCCode": "51004-1040-5",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-1040-5) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-1040-05",
"ProductNDC": "51004-1040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Articaine",
"NonProprietaryName": "Articaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20141222",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020971",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "40; .01",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20141222",
"SamplePackage": "N",
"IndicationAndUsage": "Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.",
"Description": "Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide."
},
{
"NDCCode": "51004-1051-5",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-1051-5) > 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-1051-05",
"ProductNDC": "51004-1051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20111107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088390",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "20; .01",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE],Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lidocaine and Epinephrine Injection, USP is indicated for the production of local anesthesia for dental procedures by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.",
"Description": "Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula. Epinephrine is ( - )-3,4-Dihydroxy- -[(Methylamino) methyl] benzyl alcohol and has the following structural formula."
},
{
"NDCCode": "51004-2010-5",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-2010-5) > 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-2010-05",
"ProductNDC": "51004-2010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine Bitartrate",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20111107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088390",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "20; .01",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE],Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Lidocaine and Epinephrine Injection, USP is indicated for the production of local anesthesia for dental procedures by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.",
"Description": "Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula. Epinephrine is ( - )-3,4-Dihydroxy- -[(Methylamino) methyl] benzyl alcohol and has the following structural formula."
},
{
"NDCCode": "51004-2105-0",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-2105-0) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-2105-00",
"ProductNDC": "51004-2105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20190318",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088390",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "20; .01",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190318",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine and Epinephrine Injection, USP is indicated for the production of local anesthesia for dental procedures by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.",
"Description": "Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula. C14H22N20 HCl H20 M.W. 288.8. Epinephrine is ( - )-3,4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula. C9H13NO3 M.W. 183.21."
},
{
"NDCCode": "51004-4175-1",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-4175-1) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-4175-01",
"ProductNDC": "51004-4175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Articaine",
"NonProprietaryName": "Articaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20160404",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020971",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "40; .01",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160404",
"SamplePackage": "N",
"IndicationAndUsage": "Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.",
"Description": "Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide."
},
{
"NDCCode": "51004-4185-1",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-4185-1) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-4185-01",
"ProductNDC": "51004-4185",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Articaine",
"NonProprietaryName": "Articaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20160404",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020971",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "40; .005",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160404",
"SamplePackage": "N",
"IndicationAndUsage": "Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.",
"Description": "Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide."
},
{
"NDCCode": "51004-6620-5",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-6620-5) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-6620-05",
"ProductNDC": "51004-6620",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Articaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Articaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20150128",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020971",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "40; .01",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150128",
"SamplePackage": "N",
"IndicationAndUsage": "Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.",
"Description": "Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide."
},
{
"NDCCode": "51004-6625-5",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-6625-5) / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-6625-05",
"ProductNDC": "51004-6625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Articaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Articaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBMUCOSAL",
"StartMarketingDate": "20140128",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020971",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "40; .005",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140128",
"SamplePackage": "N",
"IndicationAndUsage": "Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.",
"Description": "Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide."
},
{
"NDCCode": "0115-4411-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (0115-4411-01) ",
"NDC11Code": "00115-4411-01",
"ProductNDC": "0115-4411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dantrolene Sodium",
"NonProprietaryName": "Dantrolene Sodium",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076856",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "DANTROLENE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Striated Muscle Contraction [PE], Decreased Striated Muscle Tone [PE], Skeletal Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050301",
"SamplePackage": "N",
"IndicationAndUsage": "Dantrolene sodium capsules are indicated in controlling the manifestations of clinical spasticity resulting from upper motor neuron disorders (e.g., spinal cord injury, stroke, cerebral palsy, or multiple sclerosis). It is of particular benefit to the patient whose functional rehabilitation has been retarded by the sequelae of spasticity. Such patients must have presumably reversible spasticity where relief of spasticity will aid in restoring residual function. Dantrolene sodium capsules are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. If improvement occurs, it will ordinarily occur within the dosage titration (see DOSAGE AND ADMINISTRATION), and will be manifested by a decrease in the severity of spasticity and the ability to resume a daily function not quite attainable without dantrolene sodium capsules. Occasionally, subtle but meaningful improvement in spasticity may occur with dantrolene sodium capsule therapy. In such instances, information regarding improvement should be solicited from the patient and those who are in constant daily contact and attendance with him. Brief withdrawal of dantrolene sodium capsules for a period of 2 to 4 days will frequently demonstrate exacerbation of the manifestations of spasticity and may serve to confirm a clinical impression. A decision to continue the administration of dantrolene sodium capsules on a long-term basis is justified if introduction of the drug into the patient's regimen: 1 produces a significant reduction in painful and/or disabling spasticity such as clonus, or, 2 permits a significant reduction in the intensity and/or degree of nursing care required, or, 3 rids the patient of any annoying manifestation of spasticity considered important by the patient himself.",
"Description": "The chemical formula of dantrolene sodium is hydrated 1-[[[5-(4-nitrophenyl)-2-furanyl]methylene] amino]-2, 4-imidazolidinedione sodium salt. It is an orange powder, slightly soluble in water, but due to its slightly acidic nature the solubility increases somewhat in alkaline solution. The anhydrous salt has a molecular weight of 336. The hydrated salt contains approximately 15% water (3-1/2 moles) and has a molecular weight of 399. The structural formula for the hydrated salt is. Dantrolene sodium, USP is supplied in capsules of 25 mg, 50 mg, and 100 mg. Inactive Ingredients: Each capsule contains croscarmellose sodium, gelatin, lactose monohydrate, magnesium stearate, pharmaceutical ink, pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 25 mg capsule contains D&C Yellow #10 and FD&C Green #3, the 50 mg capsule contains FD&C Blue #1, and the 100 mg capsule contains FD&C Red #40 and FD&C Yellow #6."
},
{
"NDCCode": "0115-4411-02",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (0115-4411-02) ",
"NDC11Code": "00115-4411-02",
"ProductNDC": "0115-4411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dantrolene Sodium",
"NonProprietaryName": "Dantrolene Sodium",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076856",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "DANTROLENE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Striated Muscle Contraction [PE], Decreased Striated Muscle Tone [PE], Skeletal Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050301",
"SamplePackage": "N",
"IndicationAndUsage": "Dantrolene sodium capsules are indicated in controlling the manifestations of clinical spasticity resulting from upper motor neuron disorders (e.g., spinal cord injury, stroke, cerebral palsy, or multiple sclerosis). It is of particular benefit to the patient whose functional rehabilitation has been retarded by the sequelae of spasticity. Such patients must have presumably reversible spasticity where relief of spasticity will aid in restoring residual function. Dantrolene sodium capsules are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. If improvement occurs, it will ordinarily occur within the dosage titration (see DOSAGE AND ADMINISTRATION), and will be manifested by a decrease in the severity of spasticity and the ability to resume a daily function not quite attainable without dantrolene sodium capsules. Occasionally, subtle but meaningful improvement in spasticity may occur with dantrolene sodium capsule therapy. In such instances, information regarding improvement should be solicited from the patient and those who are in constant daily contact and attendance with him. Brief withdrawal of dantrolene sodium capsules for a period of 2 to 4 days will frequently demonstrate exacerbation of the manifestations of spasticity and may serve to confirm a clinical impression. A decision to continue the administration of dantrolene sodium capsules on a long-term basis is justified if introduction of the drug into the patient's regimen: 1 produces a significant reduction in painful and/or disabling spasticity such as clonus, or, 2 permits a significant reduction in the intensity and/or degree of nursing care required, or, 3 rids the patient of any annoying manifestation of spasticity considered important by the patient himself.",
"Description": "The chemical formula of dantrolene sodium is hydrated 1-[[[5-(4-nitrophenyl)-2-furanyl]methylene] amino]-2, 4-imidazolidinedione sodium salt. It is an orange powder, slightly soluble in water, but due to its slightly acidic nature the solubility increases somewhat in alkaline solution. The anhydrous salt has a molecular weight of 336. The hydrated salt contains approximately 15% water (3-1/2 moles) and has a molecular weight of 399. The structural formula for the hydrated salt is. Dantrolene sodium, USP is supplied in capsules of 25 mg, 50 mg, and 100 mg. Inactive Ingredients: Each capsule contains croscarmellose sodium, gelatin, lactose monohydrate, magnesium stearate, pharmaceutical ink, pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 25 mg capsule contains D&C Yellow #10 and FD&C Green #3, the 50 mg capsule contains FD&C Blue #1, and the 100 mg capsule contains FD&C Red #40 and FD&C Yellow #6."
},
{
"NDCCode": "0115-4411-03",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (0115-4411-03) ",
"NDC11Code": "00115-4411-03",
"ProductNDC": "0115-4411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dantrolene Sodium",
"NonProprietaryName": "Dantrolene Sodium",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076856",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "DANTROLENE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Striated Muscle Contraction [PE], Decreased Striated Muscle Tone [PE], Skeletal Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20050301",
"SamplePackage": "N",
"IndicationAndUsage": "Dantrolene sodium capsules are indicated in controlling the manifestations of clinical spasticity resulting from upper motor neuron disorders (e.g., spinal cord injury, stroke, cerebral palsy, or multiple sclerosis). It is of particular benefit to the patient whose functional rehabilitation has been retarded by the sequelae of spasticity. Such patients must have presumably reversible spasticity where relief of spasticity will aid in restoring residual function. Dantrolene sodium capsules are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. If improvement occurs, it will ordinarily occur within the dosage titration (see DOSAGE AND ADMINISTRATION), and will be manifested by a decrease in the severity of spasticity and the ability to resume a daily function not quite attainable without dantrolene sodium capsules. Occasionally, subtle but meaningful improvement in spasticity may occur with dantrolene sodium capsule therapy. In such instances, information regarding improvement should be solicited from the patient and those who are in constant daily contact and attendance with him. Brief withdrawal of dantrolene sodium capsules for a period of 2 to 4 days will frequently demonstrate exacerbation of the manifestations of spasticity and may serve to confirm a clinical impression. A decision to continue the administration of dantrolene sodium capsules on a long-term basis is justified if introduction of the drug into the patient's regimen: 1 produces a significant reduction in painful and/or disabling spasticity such as clonus, or, 2 permits a significant reduction in the intensity and/or degree of nursing care required, or, 3 rids the patient of any annoying manifestation of spasticity considered important by the patient himself.",
"Description": "The chemical formula of dantrolene sodium is hydrated 1-[[[5-(4-nitrophenyl)-2-furanyl]methylene] amino]-2, 4-imidazolidinedione sodium salt. It is an orange powder, slightly soluble in water, but due to its slightly acidic nature the solubility increases somewhat in alkaline solution. The anhydrous salt has a molecular weight of 336. The hydrated salt contains approximately 15% water (3-1/2 moles) and has a molecular weight of 399. The structural formula for the hydrated salt is. Dantrolene sodium, USP is supplied in capsules of 25 mg, 50 mg, and 100 mg. Inactive Ingredients: Each capsule contains croscarmellose sodium, gelatin, lactose monohydrate, magnesium stearate, pharmaceutical ink, pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 25 mg capsule contains D&C Yellow #10 and FD&C Green #3, the 50 mg capsule contains FD&C Blue #1, and the 100 mg capsule contains FD&C Red #40 and FD&C Yellow #6."
},
{
"NDCCode": "22840-4411-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-4411-2) ",
"NDC11Code": "22840-4411-02",
"ProductNDC": "22840-4411",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "English Walnut Pollen",
"NonProprietaryName": "Juglans Regia",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "JUGLANS REGIA POLLEN",
"StrengthNumber": "40000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "22840-4411-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-4411-4) ",
"NDC11Code": "22840-4411-04",
"ProductNDC": "22840-4411",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "English Walnut Pollen",
"NonProprietaryName": "Juglans Regia",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "JUGLANS REGIA POLLEN",
"StrengthNumber": "40000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "54868-4411-1",
"PackageDescription": "1 BOTTLE, SPRAY in 1 CARTON (54868-4411-1) > 120 SPRAY, METERED in 1 BOTTLE, SPRAY",
"NDC11Code": "54868-4411-01",
"ProductNDC": "54868-4411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rhinocort Aqua",
"NonProprietaryName": "Budesonide",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20010820",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020746",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "BUDESONIDE",
"StrengthNumber": "32",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "RHINOCORT AQUA Nasal Spray is a corticosteroid indicated for. ·Treatment of seasonal or perennial allergic rhinitis in adults and children ≥ 6 years. (1.1).",
"Description": "Budesonide, the active ingredient of RHINOCORT AQUA Nasal Spray, is an anti-inflammatory synthetic corticosteroid. It is designated chemically as (RS)-11-beta, 16-alpha, 17, 21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide is provided as the mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 5 is 1.6 x 103. RHINOCORT AQUA Nasal Spray is an unscented, metered-dose, manual-pump spray formulation containing a micronized suspension of budesonide in an aqueous medium. Microcrystalline cellulose and carboxymethyl cellulose sodium, dextrose anhydrous, polysorbate 80, disodium edetate, potassium sorbate, and purified water are contained in this medium; hydrochloric acid is added to adjust the pH to a target of 4.5. RHINOCORT AQUA Nasal Spray delivers 32 mcg of budesonide per spray. Each bottle of RHINOCORT AQUA Nasal Spray 32 mcg contains 120 metered sprays after initial priming. Prior to initial use, the container must be shaken gently and the pump must be primed by actuating eight times. If used daily, the pump does not need to be reprimed. If not used for two consecutive days, reprime with one spray or until a fine spray appears. If not used for more than 14 days, rinse the applicator and reprime with two sprays or until a fine spray appears."
},
{
"NDCCode": "57293-4411-2",
"PackageDescription": "60 mL in 1 BOTTLE, GLASS (57293-4411-2) ",
"NDC11Code": "57293-4411-02",
"ProductNDC": "57293-4411",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Spasm Drops",
"NonProprietaryName": "Amanita Muscaria Fruiting Body, Oyster Shell Calcium Carbonate, Crude, Citrullus Colocynthis Fruit Pulp, Copper, Lachesis Muta Venom, Lycopodium Clavatum Spore, Magnesium Phosphate, Lead, Sulfur",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "19910227",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "BioEnergetics, Inc.",
"SubstanceName": "AMANITA MUSCARIA FRUITING BODY; OYSTER SHELL CALCIUM CARBONATE, CRUDE; CITRULLUS COLOCYNTHIS FRUIT PULP; COPPER; LACHESIS MUTA VENOM; LYCOPODIUM CLAVATUM SPORE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE; LEAD; SULFUR",
"StrengthNumber": "6; 12; 6; 12; 30; 6; 12; 12; 12",
"StrengthUnit": "[hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL",
"Status": "Deprecated",
"LastUpdate": "2021-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "19910227",
"SamplePackage": "N"
},
{
"NDCCode": "61474-4411-1",
"PackageDescription": "2 BAG in 1 CARTON (61474-4411-1) / 10000 CAPSULE, LIQUID FILLED in 1 BAG",
"NDC11Code": "61474-4411-01",
"ProductNDC": "61474-4411",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Doxylamine Succinate",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"StartMarketingDate": "20260331",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Catalent Ontario Limited",
"SubstanceName": "DOXYLAMINE SUCCINATE",
"StrengthNumber": "6.25",
"StrengthUnit": "mg/1",
"Status": "Unfinished",
"LastUpdate": "2026-09-04",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "31-MAR-26"
},
{
"NDCCode": "68071-4411-3",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (68071-4411-3) ",
"NDC11Code": "68071-4411-03",
"ProductNDC": "68071-4411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nifedipine",
"NonProprietaryName": "Nifedipine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202987",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "NIFEDIPINE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180430",
"SamplePackage": "N",
"IndicationAndUsage": "Nifedipine extended-release tablets, USP are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Nifedipine extended-release tablets, USP are an extended release tablet dosage form of the calcium channel blocker nifedipine. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-dimethyl ester, C 17H 18N 2O 6, and has the structural formula:. USP dissolution test is pending. Nifedipine is a yellow crystalline substance, practically insoluble in water but soluble in ethanol. It has a molecular weight of 346.3. Nifedipine extendedrelease tablets contain either: 30, 60, or 90 mg of nifedipine for once-a-day oral administration. Inert ingredients in the 30mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, talc, titanium dioxide, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide yellow and iron oxide black. Inert ingredients in the 60mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, titanium dioxide, talc, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide red, iron oxide black and iron oxide yellow. Inert ingredients in the 90mg nifedipine extended-release tablet formulation are: lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, iron oxide red, talc, macrogol/polyethylene glycol 3350, iron oxide yellow, titanium dioxide, lecithin (soy) and iron oxide black."
},
{
"NDCCode": "68071-4411-9",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (68071-4411-9) ",
"NDC11Code": "68071-4411-09",
"ProductNDC": "68071-4411",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nifedipine",
"NonProprietaryName": "Nifedipine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20170215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202987",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "NIFEDIPINE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180430",
"SamplePackage": "N",
"IndicationAndUsage": "Nifedipine extended-release tablets, USP are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Nifedipine extended-release tablets, USP are an extended release tablet dosage form of the calcium channel blocker nifedipine. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-dimethyl ester, C 17H 18N 2O 6, and has the structural formula:. USP dissolution test is pending. Nifedipine is a yellow crystalline substance, practically insoluble in water but soluble in ethanol. It has a molecular weight of 346.3. Nifedipine extendedrelease tablets contain either: 30, 60, or 90 mg of nifedipine for once-a-day oral administration. Inert ingredients in the 30mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, talc, titanium dioxide, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide yellow and iron oxide black. Inert ingredients in the 60mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, titanium dioxide, talc, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide red, iron oxide black and iron oxide yellow. Inert ingredients in the 90mg nifedipine extended-release tablet formulation are: lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, iron oxide red, talc, macrogol/polyethylene glycol 3350, iron oxide yellow, titanium dioxide, lecithin (soy) and iron oxide black."
},
{
"NDCCode": "51004-0053-5",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-0053-5) > 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-0053-05",
"ProductNDC": "51004-0053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mepivacaine",
"NonProprietaryName": "Mepivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20130731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088387",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "MEPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "51004-1096-7",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-1096-7) > 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-1096-07",
"ProductNDC": "51004-1096",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lignospan Forte",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20111015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088389",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE",
"StrengthNumber": "20; .02",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE],Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "51004-1097-8",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-1097-8) > 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-1097-08",
"ProductNDC": "51004-1097",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scandonest L",
"NonProprietaryName": "Mepivacaine Hydrochloride And Levonordefrin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20130627",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088388",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc",
"SubstanceName": "MEPIVACAINE HYDROCHLORIDE; LEVONORDEFRIN",
"StrengthNumber": "20; .05",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "51004-1098-9",
"PackageDescription": "50 CARTRIDGE in 1 CARTON (51004-1098-9) > 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "51004-1098-09",
"ProductNDC": "51004-1098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scandonest Plain",
"NonProprietaryName": "Mepivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20130626",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088387",
"LabelerName": "Novocol Pharmaceutical of Canada, Inc.",
"SubstanceName": "MEPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>51004-4411-6</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-4411-6) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-4411-06</NDC11Code>
<ProductNDC>51004-4411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polocaine</ProprietaryName>
<NonProprietaryName>Mepivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>19841010</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088387</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada Inc.</LabelerName>
<SubstanceName>MEPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19841010</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mepivacaine is indicated for production of local anesthesia for dental procedures by infiltration or nerve block in adults and pediatric patients.</IndicationAndUsage>
<Description>Mepivacaine Hydrochloride, a tertiary amine used as a local anesthetic, is 1-methyl-2,' 6' - pipecoloxylidide monohydrochloride with the following structural formula. It is a white, crystalline, odorless powder soluble in water, but very resistant to both acid and alkaline hydrolysis. Levonordefrin, a sympathomimetic amine used as a vasoconstrictor in local anesthetic solution, is (-)-α-(1-Aminoethyl)-3, 4-dihydroxybenzyl alcohol with the following structural formula. It is a white or buff-colored crystalline solid, freely soluble in aqueous solutions of mineral acids, but practically insoluble in water. DENTAL CARTRIDGES MAY NOT BE AUTOCLAVED. 3% (30 mg/mL) Polocaine® DENTAL (mepivacaine hydrochloride injection 3% (30 mg/mL)) and 2% (20 mg/mL) Polocaine® DENTAL with Levonordefrin 1:20,000 (mepivacaine hydrochloride 2% (20 mg/mL) with levonordefrin 1:20,000 injection) are sterile solutions for injection.</Description>
</NDC>
<NDC>
<NDCCode>68071-4411-6</NDCCode>
<PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (68071-4411-6) </PackageDescription>
<NDC11Code>68071-4411-06</NDC11Code>
<ProductNDC>68071-4411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nifedipine</ProprietaryName>
<NonProprietaryName>Nifedipine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202987</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>NIFEDIPINE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nifedipine extended-release tablets, USP are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Nifedipine extended-release tablets, USP are an extended release tablet dosage form of the calcium channel blocker nifedipine. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-dimethyl ester, C 17H 18N 2O 6, and has the structural formula:. USP dissolution test is pending. Nifedipine is a yellow crystalline substance, practically insoluble in water but soluble in ethanol. It has a molecular weight of 346.3. Nifedipine extendedrelease tablets contain either: 30, 60, or 90 mg of nifedipine for once-a-day oral administration. Inert ingredients in the 30mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, talc, titanium dioxide, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide yellow and iron oxide black. Inert ingredients in the 60mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, titanium dioxide, talc, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide red, iron oxide black and iron oxide yellow. Inert ingredients in the 90mg nifedipine extended-release tablet formulation are: lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, iron oxide red, talc, macrogol/polyethylene glycol 3350, iron oxide yellow, titanium dioxide, lecithin (soy) and iron oxide black.</Description>
</NDC>
<NDC>
<NDCCode>51004-1095-6</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-1095-6) > 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-1095-06</NDC11Code>
<ProductNDC>51004-1095</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lignospan Standard</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20111015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088390</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>20; .01</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE],Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>LIGNOSPAN Solutions are indicated for the production of local anesthesia for dental procedures by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.</IndicationAndUsage>
<Description>LIGNOSPAN FORTE and LIGNOSPAN STANDARD are sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula. Epinephrine is ( - )-3,4-Dihydroxy- -[(Methylamino) methyl] benzyl alcohol and has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>51004-5801-6</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-5801-6) / 1.8 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-5801-06</NDC11Code>
<ProductNDC>51004-5801</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citanest Forte Dental</ProprietaryName>
<NonProprietaryName>Prilocaine Hcl And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20171204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078959</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>PRILOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>40; .005</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citanest Forte is indicated for the production of local anesthesia in dentistry by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.</IndicationAndUsage>
<Description>4% Citanest® Forte DENTAL with Epinephrine 1:200,000 (Citanest Forte), Prilocaine HCl 4% (72 mg/1.8 mL) (40 mg/mL) with Epinephrine 1:200,000 Injection, is a sterile, non-pyrogenic isotonic solution that contains a local anesthetic agent with epinephrine (as bitartrate) and is administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. The quantitative composition is shown in Table 1. Citanest Forte contains prilocaine HCl, which is chemically designated as propanamide, N-(2-methyl-phenyl) -2- (propylamino)-, monohydrochloride and has the following structural formula. and epinephrine, which is (-) -3, 4-Dihydroxy- ∝ -[(methylamino) methyl] benzyl alcohol and has the following structural formula. Parenteral drug products should be inspected visually for particulate matter and discoloration prior to administration. The specific quantitative composition is shown in Table 1.</Description>
</NDC>
<NDC>
<NDCCode>51004-0005-3</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-0005-3) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-0005-03</NDC11Code>
<ProductNDC>51004-0005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mepivacaine</ProprietaryName>
<NonProprietaryName>Mepivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20150410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088387</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>MEPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mepivacaine is indicated for production of local anesthesia for dental procedures by infiltration or nerve block in adults and pediatric patients.</IndicationAndUsage>
<Description>Mepivacaine Hydrochloride, a tertiary amine used as a local anesthetic, is 1-methyl-2', 6' - pipecoloxylidide monohydrochloride with the following structural formula. It is a white, crystalline, odorless powder soluble in water, but very resistant to both acid and alkaline hydrolysis. Levonordefrin, a sympathomimetic amine used as a vasoconstrictor in local anesthetic solution, is (-)--(1-Aminoethyl)-3, 4-dihydroxybenzyl alcohol with the following structural formula. It is a white or buff-colored crystalline solid, freely soluble in aqueous solutions of mineral acids, but practically insoluble in water;. DENTAL CARTRIDGES MAY NOT BE AUTOCLAVED. Mepivacaine hydrochloride injection 3% (30 mg/mL) and Mepivacaine hydrochloride 2% (20 mg/mL) with levonordefrin 1:20,000 injection are sterile solutions for injection.</Description>
</NDC>
<NDC>
<NDCCode>51004-0102-5</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-0102-5) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-0102-05</NDC11Code>
<ProductNDC>51004-0102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Articaine</ProprietaryName>
<NonProprietaryName>Articaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20151204</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020971</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>40; .005</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.</IndicationAndUsage>
<Description>Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>51004-0550-5</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-0550-5) > 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-0550-05</NDC11Code>
<ProductNDC>51004-0550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20111107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088389</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>20; .02</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE],Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lidocaine and Epinephrine Injection, USP is indicated for the production of local anesthesia for dental procedures by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula. Epinephrine is ( - )-3,4-Dihydroxy- -[(Methylamino) methyl] benzyl alcohol and has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>51004-1010-5</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-1010-5) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-1010-05</NDC11Code>
<ProductNDC>51004-1010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Articaine</ProprietaryName>
<NonProprietaryName>Articaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20150622</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020971</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>40; .01</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150622</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.</IndicationAndUsage>
<Description>Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>51004-1040-5</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-1040-5) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-1040-05</NDC11Code>
<ProductNDC>51004-1040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Articaine</ProprietaryName>
<NonProprietaryName>Articaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20141222</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020971</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>40; .01</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.</IndicationAndUsage>
<Description>Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>51004-1051-5</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-1051-5) > 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-1051-05</NDC11Code>
<ProductNDC>51004-1051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20111107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088390</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>20; .01</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE],Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lidocaine and Epinephrine Injection, USP is indicated for the production of local anesthesia for dental procedures by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula. Epinephrine is ( - )-3,4-Dihydroxy- -[(Methylamino) methyl] benzyl alcohol and has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>51004-2010-5</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-2010-5) > 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-2010-05</NDC11Code>
<ProductNDC>51004-2010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine Bitartrate</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20111107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088390</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>20; .01</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE],Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Lidocaine and Epinephrine Injection, USP is indicated for the production of local anesthesia for dental procedures by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula. Epinephrine is ( - )-3,4-Dihydroxy- -[(Methylamino) methyl] benzyl alcohol and has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>51004-2105-0</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-2105-0) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-2105-00</NDC11Code>
<ProductNDC>51004-2105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20190318</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088390</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>20; .01</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190318</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine and Epinephrine Injection, USP is indicated for the production of local anesthesia for dental procedures by nerve block or infiltration techniques. Only accepted procedures for these techniques as described in standard textbooks are recommended.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine, USP is a sterile isotonic solution containing a local anesthetic agent, Lidocaine Hydrochloride, and a vasoconstrictor, Epinephrine (as bitartrate) and are administered parenterally by injection. Both solutions are available in single dose cartridges of 1.7 mL (See INDICATIONS AND USAGE for specific uses). The solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-monohydrochloride, and has the following structural formula. C14H22N20 HCl H20 M.W. 288.8. Epinephrine is ( - )-3,4-Dihydroxy-α-[(Methylamino) methyl] benzyl alcohol and has the following structural formula. C9H13NO3 M.W. 183.21.</Description>
</NDC>
<NDC>
<NDCCode>51004-4175-1</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-4175-1) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-4175-01</NDC11Code>
<ProductNDC>51004-4175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Articaine</ProprietaryName>
<NonProprietaryName>Articaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20160404</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020971</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>40; .01</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160404</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.</IndicationAndUsage>
<Description>Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>51004-4185-1</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-4185-1) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-4185-01</NDC11Code>
<ProductNDC>51004-4185</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Articaine</ProprietaryName>
<NonProprietaryName>Articaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20160404</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020971</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>40; .005</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160404</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.</IndicationAndUsage>
<Description>Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>51004-6620-5</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-6620-5) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-6620-05</NDC11Code>
<ProductNDC>51004-6620</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Articaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Articaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20150128</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020971</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>40; .01</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.</IndicationAndUsage>
<Description>Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>51004-6625-5</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-6625-5) / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-6625-05</NDC11Code>
<ProductNDC>51004-6625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Articaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Articaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBMUCOSAL</RouteName>
<StartMarketingDate>20140128</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020971</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>ARTICAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>40; .005</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Articaine HCl and Epinephrine is indicated for local, infiltrative, or conductive anesthesia in both simple and complex dental procedures in adults and pediatric patients 4 years of age or older.</IndicationAndUsage>
<Description>Articaine HCl and Epinephrine, for intraoral submucosal infiltration use, is a sterile, aqueous solution that contains articaine HCl 4% (40 mg/mL) and epinephrine bitartrate in an epinephrine 1:200,000 or epinephrine 1:100,000 strength.Articaine HCl is an amino amide local anesthetic, chemically designated as 4-methyl-3-[2-(propylamino)-propionamido]-2-thiophene-carboxylic acid, methyl ester hydrochloride and is a racemic mixture.Articaine HCl has a molecular weight of 320.84 and the following structural formula. Articaine HCl has a partition coefficient in n-octanol/Soerensen buffer (pH 7.35) of 17 and a pKa of 7.8.Epinephrine bitartrate, (-)-1-(3,4-Dihydroxyphenyl)-2-methylamino-ethanol (+) tartrate (1:1) salt, is a vasoconstrictor with a concentration of 1:200,000 or 1:100,000 (expressed as free base). It has a molecular weight of 333.3 and the following structural formula. Articaine HCl and Epinephrine contains the following inactive ingredients: sodium chloride (1.6 mg/mL) and sodium metabisulfite (0.5 mg/mL). The product is formulated with a 15% overage of epinephrine. The pH is adjusted with sodium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>0115-4411-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (0115-4411-01) </PackageDescription>
<NDC11Code>00115-4411-01</NDC11Code>
<ProductNDC>0115-4411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dantrolene Sodium</ProprietaryName>
<NonProprietaryName>Dantrolene Sodium</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076856</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>DANTROLENE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Striated Muscle Contraction [PE], Decreased Striated Muscle Tone [PE], Skeletal Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dantrolene sodium capsules are indicated in controlling the manifestations of clinical spasticity resulting from upper motor neuron disorders (e.g., spinal cord injury, stroke, cerebral palsy, or multiple sclerosis). It is of particular benefit to the patient whose functional rehabilitation has been retarded by the sequelae of spasticity. Such patients must have presumably reversible spasticity where relief of spasticity will aid in restoring residual function. Dantrolene sodium capsules are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. If improvement occurs, it will ordinarily occur within the dosage titration (see DOSAGE AND ADMINISTRATION), and will be manifested by a decrease in the severity of spasticity and the ability to resume a daily function not quite attainable without dantrolene sodium capsules. Occasionally, subtle but meaningful improvement in spasticity may occur with dantrolene sodium capsule therapy. In such instances, information regarding improvement should be solicited from the patient and those who are in constant daily contact and attendance with him. Brief withdrawal of dantrolene sodium capsules for a period of 2 to 4 days will frequently demonstrate exacerbation of the manifestations of spasticity and may serve to confirm a clinical impression. A decision to continue the administration of dantrolene sodium capsules on a long-term basis is justified if introduction of the drug into the patient's regimen: 1 produces a significant reduction in painful and/or disabling spasticity such as clonus, or, 2 permits a significant reduction in the intensity and/or degree of nursing care required, or, 3 rids the patient of any annoying manifestation of spasticity considered important by the patient himself.</IndicationAndUsage>
<Description>The chemical formula of dantrolene sodium is hydrated 1-[[[5-(4-nitrophenyl)-2-furanyl]methylene] amino]-2, 4-imidazolidinedione sodium salt. It is an orange powder, slightly soluble in water, but due to its slightly acidic nature the solubility increases somewhat in alkaline solution. The anhydrous salt has a molecular weight of 336. The hydrated salt contains approximately 15% water (3-1/2 moles) and has a molecular weight of 399. The structural formula for the hydrated salt is. Dantrolene sodium, USP is supplied in capsules of 25 mg, 50 mg, and 100 mg. Inactive Ingredients: Each capsule contains croscarmellose sodium, gelatin, lactose monohydrate, magnesium stearate, pharmaceutical ink, pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 25 mg capsule contains D&C Yellow #10 and FD&C Green #3, the 50 mg capsule contains FD&C Blue #1, and the 100 mg capsule contains FD&C Red #40 and FD&C Yellow #6.</Description>
</NDC>
<NDC>
<NDCCode>0115-4411-02</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (0115-4411-02) </PackageDescription>
<NDC11Code>00115-4411-02</NDC11Code>
<ProductNDC>0115-4411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dantrolene Sodium</ProprietaryName>
<NonProprietaryName>Dantrolene Sodium</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076856</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>DANTROLENE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Striated Muscle Contraction [PE], Decreased Striated Muscle Tone [PE], Skeletal Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dantrolene sodium capsules are indicated in controlling the manifestations of clinical spasticity resulting from upper motor neuron disorders (e.g., spinal cord injury, stroke, cerebral palsy, or multiple sclerosis). It is of particular benefit to the patient whose functional rehabilitation has been retarded by the sequelae of spasticity. Such patients must have presumably reversible spasticity where relief of spasticity will aid in restoring residual function. Dantrolene sodium capsules are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. If improvement occurs, it will ordinarily occur within the dosage titration (see DOSAGE AND ADMINISTRATION), and will be manifested by a decrease in the severity of spasticity and the ability to resume a daily function not quite attainable without dantrolene sodium capsules. Occasionally, subtle but meaningful improvement in spasticity may occur with dantrolene sodium capsule therapy. In such instances, information regarding improvement should be solicited from the patient and those who are in constant daily contact and attendance with him. Brief withdrawal of dantrolene sodium capsules for a period of 2 to 4 days will frequently demonstrate exacerbation of the manifestations of spasticity and may serve to confirm a clinical impression. A decision to continue the administration of dantrolene sodium capsules on a long-term basis is justified if introduction of the drug into the patient's regimen: 1 produces a significant reduction in painful and/or disabling spasticity such as clonus, or, 2 permits a significant reduction in the intensity and/or degree of nursing care required, or, 3 rids the patient of any annoying manifestation of spasticity considered important by the patient himself.</IndicationAndUsage>
<Description>The chemical formula of dantrolene sodium is hydrated 1-[[[5-(4-nitrophenyl)-2-furanyl]methylene] amino]-2, 4-imidazolidinedione sodium salt. It is an orange powder, slightly soluble in water, but due to its slightly acidic nature the solubility increases somewhat in alkaline solution. The anhydrous salt has a molecular weight of 336. The hydrated salt contains approximately 15% water (3-1/2 moles) and has a molecular weight of 399. The structural formula for the hydrated salt is. Dantrolene sodium, USP is supplied in capsules of 25 mg, 50 mg, and 100 mg. Inactive Ingredients: Each capsule contains croscarmellose sodium, gelatin, lactose monohydrate, magnesium stearate, pharmaceutical ink, pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 25 mg capsule contains D&C Yellow #10 and FD&C Green #3, the 50 mg capsule contains FD&C Blue #1, and the 100 mg capsule contains FD&C Red #40 and FD&C Yellow #6.</Description>
</NDC>
<NDC>
<NDCCode>0115-4411-03</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (0115-4411-03) </PackageDescription>
<NDC11Code>00115-4411-03</NDC11Code>
<ProductNDC>0115-4411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dantrolene Sodium</ProprietaryName>
<NonProprietaryName>Dantrolene Sodium</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076856</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>DANTROLENE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Striated Muscle Contraction [PE], Decreased Striated Muscle Tone [PE], Skeletal Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dantrolene sodium capsules are indicated in controlling the manifestations of clinical spasticity resulting from upper motor neuron disorders (e.g., spinal cord injury, stroke, cerebral palsy, or multiple sclerosis). It is of particular benefit to the patient whose functional rehabilitation has been retarded by the sequelae of spasticity. Such patients must have presumably reversible spasticity where relief of spasticity will aid in restoring residual function. Dantrolene sodium capsules are not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. If improvement occurs, it will ordinarily occur within the dosage titration (see DOSAGE AND ADMINISTRATION), and will be manifested by a decrease in the severity of spasticity and the ability to resume a daily function not quite attainable without dantrolene sodium capsules. Occasionally, subtle but meaningful improvement in spasticity may occur with dantrolene sodium capsule therapy. In such instances, information regarding improvement should be solicited from the patient and those who are in constant daily contact and attendance with him. Brief withdrawal of dantrolene sodium capsules for a period of 2 to 4 days will frequently demonstrate exacerbation of the manifestations of spasticity and may serve to confirm a clinical impression. A decision to continue the administration of dantrolene sodium capsules on a long-term basis is justified if introduction of the drug into the patient's regimen: 1 produces a significant reduction in painful and/or disabling spasticity such as clonus, or, 2 permits a significant reduction in the intensity and/or degree of nursing care required, or, 3 rids the patient of any annoying manifestation of spasticity considered important by the patient himself.</IndicationAndUsage>
<Description>The chemical formula of dantrolene sodium is hydrated 1-[[[5-(4-nitrophenyl)-2-furanyl]methylene] amino]-2, 4-imidazolidinedione sodium salt. It is an orange powder, slightly soluble in water, but due to its slightly acidic nature the solubility increases somewhat in alkaline solution. The anhydrous salt has a molecular weight of 336. The hydrated salt contains approximately 15% water (3-1/2 moles) and has a molecular weight of 399. The structural formula for the hydrated salt is. Dantrolene sodium, USP is supplied in capsules of 25 mg, 50 mg, and 100 mg. Inactive Ingredients: Each capsule contains croscarmellose sodium, gelatin, lactose monohydrate, magnesium stearate, pharmaceutical ink, pregelatinized starch, titanium dioxide, and yellow iron oxide. In addition, the 25 mg capsule contains D&C Yellow #10 and FD&C Green #3, the 50 mg capsule contains FD&C Blue #1, and the 100 mg capsule contains FD&C Red #40 and FD&C Yellow #6.</Description>
</NDC>
<NDC>
<NDCCode>22840-4411-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-4411-2) </PackageDescription>
<NDC11Code>22840-4411-02</NDC11Code>
<ProductNDC>22840-4411</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>English Walnut Pollen</ProprietaryName>
<NonProprietaryName>Juglans Regia</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>JUGLANS REGIA POLLEN</SubstanceName>
<StrengthNumber>40000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>22840-4411-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-4411-4) </PackageDescription>
<NDC11Code>22840-4411-04</NDC11Code>
<ProductNDC>22840-4411</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>English Walnut Pollen</ProprietaryName>
<NonProprietaryName>Juglans Regia</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>JUGLANS REGIA POLLEN</SubstanceName>
<StrengthNumber>40000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>54868-4411-1</NDCCode>
<PackageDescription>1 BOTTLE, SPRAY in 1 CARTON (54868-4411-1) > 120 SPRAY, METERED in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>54868-4411-01</NDC11Code>
<ProductNDC>54868-4411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rhinocort Aqua</ProprietaryName>
<NonProprietaryName>Budesonide</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20010820</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020746</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>BUDESONIDE</SubstanceName>
<StrengthNumber>32</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>RHINOCORT AQUA Nasal Spray is a corticosteroid indicated for. ·Treatment of seasonal or perennial allergic rhinitis in adults and children ≥ 6 years. (1.1).</IndicationAndUsage>
<Description>Budesonide, the active ingredient of RHINOCORT AQUA Nasal Spray, is an anti-inflammatory synthetic corticosteroid. It is designated chemically as (RS)-11-beta, 16-alpha, 17, 21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16, 17-acetal with butyraldehyde. Budesonide is provided as the mixture of two epimers (22R and 22S). The empirical formula of budesonide is C25H34O6 and its molecular weight is 430.5. Its structural formula is. Budesonide is a white to off-white, odorless powder that is practically insoluble in water and in heptane, sparingly soluble in ethanol, and freely soluble in chloroform. Its partition coefficient between octanol and water at pH 5 is 1.6 x 103. RHINOCORT AQUA Nasal Spray is an unscented, metered-dose, manual-pump spray formulation containing a micronized suspension of budesonide in an aqueous medium. Microcrystalline cellulose and carboxymethyl cellulose sodium, dextrose anhydrous, polysorbate 80, disodium edetate, potassium sorbate, and purified water are contained in this medium; hydrochloric acid is added to adjust the pH to a target of 4.5. RHINOCORT AQUA Nasal Spray delivers 32 mcg of budesonide per spray. Each bottle of RHINOCORT AQUA Nasal Spray 32 mcg contains 120 metered sprays after initial priming. Prior to initial use, the container must be shaken gently and the pump must be primed by actuating eight times. If used daily, the pump does not need to be reprimed. If not used for two consecutive days, reprime with one spray or until a fine spray appears. If not used for more than 14 days, rinse the applicator and reprime with two sprays or until a fine spray appears.</Description>
</NDC>
<NDC>
<NDCCode>57293-4411-2</NDCCode>
<PackageDescription>60 mL in 1 BOTTLE, GLASS (57293-4411-2) </PackageDescription>
<NDC11Code>57293-4411-02</NDC11Code>
<ProductNDC>57293-4411</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Spasm Drops</ProprietaryName>
<NonProprietaryName>Amanita Muscaria Fruiting Body, Oyster Shell Calcium Carbonate, Crude, Citrullus Colocynthis Fruit Pulp, Copper, Lachesis Muta Venom, Lycopodium Clavatum Spore, Magnesium Phosphate, Lead, Sulfur</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19910227</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>BioEnergetics, Inc.</LabelerName>
<SubstanceName>AMANITA MUSCARIA FRUITING BODY; OYSTER SHELL CALCIUM CARBONATE, CRUDE; CITRULLUS COLOCYNTHIS FRUIT PULP; COPPER; LACHESIS MUTA VENOM; LYCOPODIUM CLAVATUM SPORE; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE; LEAD; SULFUR</SubstanceName>
<StrengthNumber>6; 12; 6; 12; 30; 6; 12; 12; 12</StrengthNumber>
<StrengthUnit>[hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL; [hp_X]/60mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19910227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61474-4411-1</NDCCode>
<PackageDescription>2 BAG in 1 CARTON (61474-4411-1) / 10000 CAPSULE, LIQUID FILLED in 1 BAG</PackageDescription>
<NDC11Code>61474-4411-01</NDC11Code>
<ProductNDC>61474-4411</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Doxylamine Succinate</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<StartMarketingDate>20260331</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Catalent Ontario Limited</LabelerName>
<SubstanceName>DOXYLAMINE SUCCINATE</SubstanceName>
<StrengthNumber>6.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-09-04</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>31-MAR-26</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>68071-4411-3</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (68071-4411-3) </PackageDescription>
<NDC11Code>68071-4411-03</NDC11Code>
<ProductNDC>68071-4411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nifedipine</ProprietaryName>
<NonProprietaryName>Nifedipine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202987</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>NIFEDIPINE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nifedipine extended-release tablets, USP are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Nifedipine extended-release tablets, USP are an extended release tablet dosage form of the calcium channel blocker nifedipine. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-dimethyl ester, C 17H 18N 2O 6, and has the structural formula:. USP dissolution test is pending. Nifedipine is a yellow crystalline substance, practically insoluble in water but soluble in ethanol. It has a molecular weight of 346.3. Nifedipine extendedrelease tablets contain either: 30, 60, or 90 mg of nifedipine for once-a-day oral administration. Inert ingredients in the 30mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, talc, titanium dioxide, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide yellow and iron oxide black. Inert ingredients in the 60mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, titanium dioxide, talc, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide red, iron oxide black and iron oxide yellow. Inert ingredients in the 90mg nifedipine extended-release tablet formulation are: lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, iron oxide red, talc, macrogol/polyethylene glycol 3350, iron oxide yellow, titanium dioxide, lecithin (soy) and iron oxide black.</Description>
</NDC>
<NDC>
<NDCCode>68071-4411-9</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (68071-4411-9) </PackageDescription>
<NDC11Code>68071-4411-09</NDC11Code>
<ProductNDC>68071-4411</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nifedipine</ProprietaryName>
<NonProprietaryName>Nifedipine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202987</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>NIFEDIPINE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nifedipine extended-release tablets, USP are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Nifedipine extended-release tablets, USP are an extended release tablet dosage form of the calcium channel blocker nifedipine. Nifedipine is 3,5-pyridinedicarboxylic acid, 1,4-dihydro-2,6-dimethyl-4-(2-nitrophenyl)-dimethyl ester, C 17H 18N 2O 6, and has the structural formula:. USP dissolution test is pending. Nifedipine is a yellow crystalline substance, practically insoluble in water but soluble in ethanol. It has a molecular weight of 346.3. Nifedipine extendedrelease tablets contain either: 30, 60, or 90 mg of nifedipine for once-a-day oral administration. Inert ingredients in the 30mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, talc, titanium dioxide, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide yellow and iron oxide black. Inert ingredients in the 60mg nifedipine extended-release tablet formulation are lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, titanium dioxide, talc, macrogol/polyethylene glycol 3350, lecithin (soy), iron oxide red, iron oxide black and iron oxide yellow. Inert ingredients in the 90mg nifedipine extended-release tablet formulation are: lactose monohydrate, microcrystalline cellulose, hypromellose, magnesium stearate, polyvinyl alcohol, iron oxide red, talc, macrogol/polyethylene glycol 3350, iron oxide yellow, titanium dioxide, lecithin (soy) and iron oxide black.</Description>
</NDC>
<NDC>
<NDCCode>51004-0053-5</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-0053-5) > 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-0053-05</NDC11Code>
<ProductNDC>51004-0053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mepivacaine</ProprietaryName>
<NonProprietaryName>Mepivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20130731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088387</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>MEPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51004-1096-7</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-1096-7) > 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-1096-07</NDC11Code>
<ProductNDC>51004-1096</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lignospan Forte</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20111015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088389</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>20; .02</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE],Adrenergic alpha-Agonists [MoA],Adrenergic beta-Agonists [MoA],alpha-Adrenergic Agonist [EPC],beta-Adrenergic Agonist [EPC],Catecholamine [EPC],Catecholamines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51004-1097-8</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-1097-8) > 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-1097-08</NDC11Code>
<ProductNDC>51004-1097</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scandonest L</ProprietaryName>
<NonProprietaryName>Mepivacaine Hydrochloride And Levonordefrin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20130627</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088388</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc</LabelerName>
<SubstanceName>MEPIVACAINE HYDROCHLORIDE; LEVONORDEFRIN</SubstanceName>
<StrengthNumber>20; .05</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51004-1098-9</NDCCode>
<PackageDescription>50 CARTRIDGE in 1 CARTON (51004-1098-9) > 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>51004-1098-09</NDC11Code>
<ProductNDC>51004-1098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scandonest Plain</ProprietaryName>
<NonProprietaryName>Mepivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20130626</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088387</ApplicationNumber>
<LabelerName>Novocol Pharmaceutical of Canada, Inc.</LabelerName>
<SubstanceName>MEPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
</NDCList>