{
"NDC": [
{
"NDCCode": "51079-284-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-284-20) / 1 TABLET in 1 BLISTER PACK (51079-284-01) ",
"NDC11Code": "51079-0284-20",
"ProductNDC": "51079-284",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19971031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070325",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2025-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19971031",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-Chloro-1,3-dihydro-1-methyl-5-phenyl-2 H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The molecular formula is C 16H 13ClN 2O and the molecular weight is 284.7. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam, USP. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The 5 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake. The 10 mg tablets also contain D&C Yellow No. 10 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake."
},
{
"NDCCode": "46122-284-60",
"PackageDescription": "20 BLISTER PACK in 1 CARTON (46122-284-60) > 1 GUM, CHEWING in 1 BLISTER PACK",
"NDC11Code": "46122-0284-60",
"ProductNDC": "46122-284",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Good Neighbor Pharmacy Nicotine",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "GUM, CHEWING",
"RouteName": "ORAL",
"StartMarketingDate": "20141202",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076777",
"LabelerName": "Amerisource Bergen",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20141202",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "57687-284-20",
"PackageDescription": "20 mL in 1 BOTTLE, DROPPER (57687-284-20) ",
"NDC11Code": "57687-0284-20",
"ProductNDC": "57687-284",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bach Original Flower Remedies",
"NonProprietaryName": "Aesculus Hippocastanum Flower",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20020101",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Nelson Bach USA Limited",
"SubstanceName": "AESCULUS HIPPOCASTANUM FLOWER",
"StrengthNumber": "5",
"StrengthUnit": "[hp_X]/.095mL",
"Status": "Active",
"LastUpdate": "2020-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020101",
"SamplePackage": "N",
"IndicationAndUsage": "For relief of naturally occurring simple nervous tension."
},
{
"NDCCode": "63323-284-20",
"PackageDescription": "10 VIAL in 1 TRAY (63323-284-20) / 20 mL in 1 VIAL (63323-284-01) ",
"NDC11Code": "63323-0284-20",
"ProductNDC": "63323-284",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20000920",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20000920",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*, 38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "63323-284-21",
"PackageDescription": "10 VIAL in 1 TRAY (63323-284-21) / 20 mL in 1 VIAL",
"NDC11Code": "63323-0284-21",
"ProductNDC": "63323-284",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20000920",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2024-10-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20000920",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, vancomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, and skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis) , vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. The parenteral form of vancomycin may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infection.",
"Description": "Vancomycin Hydrochloride for Injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). Vancomycin hydrochloride has the following structural formula:. C 66H 75Cl 2N 9O 24 HCl M.W. 1485.73."
},
{
"NDCCode": "63323-284-26",
"PackageDescription": "10 VIAL in 1 TRAY (63323-284-26) / 20 mL in 1 VIAL (63323-284-42) ",
"NDC11Code": "63323-0284-26",
"ProductNDC": "63323-284",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210503",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2024-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210503",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "63323-284-45",
"PackageDescription": "10 VIAL in 1 TRAY (63323-284-45) > 20 mL in 1 VIAL (63323-284-41) ",
"NDC11Code": "63323-0284-45",
"ProductNDC": "63323-284",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20171026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204107",
"LabelerName": "Fresenius Kabi, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171026",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-a-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "66220-284-22",
"PackageDescription": "20 BAG in 1 CASE (66220-284-22) / 200 mL in 1 BAG (66220-284-11) ",
"NDC11Code": "66220-0284-22",
"ProductNDC": "66220-284",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Caldolor",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022348",
"LabelerName": "Cumberland Pharmaceuticals Inc.",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "800",
"StrengthUnit": "mg/200mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200101",
"SamplePackage": "N",
"IndicationAndUsage": "CALDOLOR is indicated in adults and pediatric patients aged 3 months and older for the: : 1 management of mild to moderate pain, including postoperative pain , 2 management of moderate to severe pain, including postoperative pain, as an adjunct to opioid analgesics , 3 reduction of fever .",
"Description": "CALDOLOR (ibuprofen injection) is a nonsteroidal anti-inflammatory drug, available as an 800 mg/8 mL single dose vial (100 mg/mL) and 800 mg/200 mL (4 mg/mL) polypropylene, single dose, ready-to-use, flexible bag for intravenous administration. The chemical name is ibuprofen, which is (±)-2-(p-isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74°C to 77°C. It has a molecular weight of 206.28. It is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula of ibuprofen is represented below:."
},
{
"NDCCode": "85766-284-20",
"PackageDescription": "20 TABLET in 1 BOTTLE (85766-284-20) ",
"NDC11Code": "85766-0284-20",
"ProductNDC": "85766-284",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorzoxazone",
"NonProprietaryName": "Chlorzoxazone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230817",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089853",
"LabelerName": "Sportpharm LLC",
"SubstanceName": "CHLORZOXAZONE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260929",
"SamplePackage": "N",
"IndicationAndUsage": "Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.",
"Description": "Each 375 mg chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg. Chemical Name: 5-Chloro-2-benzoxazolinone. Structural Formula. Molecular Formula: C 7H 4ClNO 2. Molecular Weight: 169.56. Chlorzoxazone, USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone USP is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients. 375 mg contains colloidal silicon dioxide, corn starch, croscarmellose sodium, docusate sodium with sodium benzoate, lactose monohydrate, magnesium stearate and microcrystalline cellulose. 500 mg contains D&C Red 27/Phloxine Aluminium lake, FD&C Yellow 6/Sunset Yellow FCF Aluminium lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80, pregelatinized starch, sodium starch glycolate. 750 mg contains colloidal silicon dioxide, corn starch, croscarmellose sodium, docusate sodium with sodium benzoate, lactose monohydrate, magnesium stearate and microcrystalline cellulose. Meets USP dissolution test 5 for 500 mg. FDA approved dissolution method differs from that of the USP for 375 mg and 750 mg."
},
{
"NDCCode": "51079-007-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-007-20) > 1 CAPSULE, DELAYED RELEASE in 1 BLISTER PACK (51079-007-01) ",
"NDC11Code": "51079-0007-20",
"ProductNDC": "51079-007",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20030901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075876",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20030901",
"SamplePackage": "N"
},
{
"NDCCode": "51079-023-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-023-20) / 1 TABLET in 1 BLISTER PACK (51079-023-01) ",
"NDC11Code": "51079-0023-20",
"ProductNDC": "51079-023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metolazone",
"NonProprietaryName": "Metolazone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20050415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076698",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "METOLAZONE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis [PE], Thiazide-like Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050415",
"SamplePackage": "N",
"IndicationAndUsage": "Metolazone tablets are indicated for the treatment of salt and water retention including: 1 edema accompanying congestive heart failure; , 2 edema accompanying renal diseases, including the nephrotic syndrome and states of diminished renal function. .",
"Description": "Metolazone Tablets, USP for oral administration contain 2.5 mg, 5 mg or 10 mg of metolazone, USP, a diuretic/saluretic/antihypertensive drug of the quinazoline class. Metolazone has the molecular formula C 16H 16ClN 3O 3S, the chemical name 7-chloro-1, 2, 3, 4-tetrahydro-2-methyl-3-(2-methylphenyl)-4-oxo-6-quinazolinesulfonamide, and a molecular weight of 365.83. The structural formula is:. Metolazone is only sparingly soluble in water, but more soluble in plasma, blood, alkali, and organic solvents. Inactive Ingredients: colloidal silicon dioxide, FD&C Yellow #6 Lake HT, magnesium stearate and microcrystalline cellulose. In addition, the 10 mg strength contains D&C Yellow #10 Lake HT and FD&C Blue #2 Lake HT. Meets USP Dissolution Test 2."
},
{
"NDCCode": "51079-024-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-024-20) / 1 TABLET in 1 BLISTER PACK (51079-024-01) ",
"NDC11Code": "51079-0024-20",
"ProductNDC": "51079-024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metolazone",
"NonProprietaryName": "Metolazone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20050201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076698",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "METOLAZONE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis [PE], Thiazide-like Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050201",
"SamplePackage": "N",
"IndicationAndUsage": "Metolazone tablets are indicated for the treatment of salt and water retention including: 1 edema accompanying congestive heart failure; , 2 edema accompanying renal diseases, including the nephrotic syndrome and states of diminished renal function. .",
"Description": "Metolazone Tablets, USP for oral administration contain 2.5 mg, 5 mg or 10 mg of metolazone, USP, a diuretic/saluretic/antihypertensive drug of the quinazoline class. Metolazone has the molecular formula C 16H 16ClN 3O 3S, the chemical name 7-chloro-1, 2, 3, 4-tetrahydro-2-methyl-3-(2-methylphenyl)-4-oxo-6-quinazolinesulfonamide, and a molecular weight of 365.83. The structural formula is:. Metolazone is only sparingly soluble in water, but more soluble in plasma, blood, alkali, and organic solvents. Inactive Ingredients: colloidal silicon dioxide, FD&C Yellow #6 Lake HT, magnesium stearate and microcrystalline cellulose. In addition, the 10 mg strength contains D&C Yellow #10 Lake HT and FD&C Blue #2 Lake HT. Meets USP Dissolution Test 2."
},
{
"NDCCode": "51079-027-20",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (51079-027-20) > 1 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (51079-027-01)",
"NDC11Code": "51079-0027-20",
"ProductNDC": "51079-027",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinidine Gluconate",
"NonProprietaryName": "Quinidine Gluconate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110823",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089338",
"LabelerName": "UDL Laboratories, Inc.",
"SubstanceName": "QUINIDINE GLUCONATE",
"StrengthNumber": "324",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiarrhythmic [EPC],Cytochrome P450 2D6 Inhibitor [EPC],Cytochrome P450 2D6 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2015-04-10"
},
{
"NDCCode": "51079-028-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-028-20) / 1 CAPSULE in 1 BLISTER PACK (51079-028-01) ",
"NDC11Code": "51079-0028-20",
"ProductNDC": "51079-028",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tacrolimus",
"NonProprietaryName": "Tacrolimus",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20101101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090596",
"LabelerName": "MylanInstitutional Inc.",
"SubstanceName": "TACROLIMUS",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101101",
"SamplePackage": "N",
"IndicationAndUsage": "Tacrolimus capsules are a calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult patients receiving allogeneic liver, kidney, or heart transplants, and pediatric patients receiving allogenic liver transplants in combination with other immunosuppressants. ( 1.1).",
"Description": "Tacrolimus, previously known as FK506, is the active ingredient in tacrolimus capsules. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus is designated as (‒)-(3S,4R,5S,8R,9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylvinyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone monohydrate. The chemical structure of tacrolimus is. Tacrolimus has a molecular formula of C 44H 69NO 12H 2O and a formula weight of 822.03. Tacrolimus, USP appears as a white to off-white powder. It is insoluble in water, very soluble in ethanol, and soluble in methanol and chloroform. Tacrolimus capsules, USP are available for oral administration as capsules containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus. Inactive ingredients include anhydrous lactose, black iron oxide, colloidal silicon dioxide, croscarmellose sodium, gelatin, hypromellose, lactose monohydrate, magnesium stearate, sodium lauryl sulfate, titanium dioxide and yellow iron oxide. The 0.5 mg capsules also contain D&C Red No. 28, D&C Yellow No. 10 and FD&C Red No. 40, the 1 mg capsules also contain FD&C Blue No. 1 and FD&C Red No. 3 and the 5 mg capsules also contain D&C Red No. 33, D&C Red No. 28 and D&C Yellow No. 10. In addition, the black imprinting ink contains black iron oxide, D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Meets USP Dissolution Test 5."
},
{
"NDCCode": "51079-034-20",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (51079-034-20) > 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-034-01)",
"NDC11Code": "51079-0034-20",
"ProductNDC": "51079-034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076276",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2015-04-17"
},
{
"NDCCode": "51079-035-20",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (51079-035-20) > 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-035-01)",
"NDC11Code": "51079-0035-20",
"ProductNDC": "51079-035",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076276",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2015-04-17"
},
{
"NDCCode": "51079-047-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-047-20) > 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (51079-047-01) ",
"NDC11Code": "51079-0047-20",
"ProductNDC": "51079-047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090942",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20110323",
"SamplePackage": "N"
},
{
"NDCCode": "51079-051-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-051-20) / 1 TABLET, DELAYED RELEASE in 1 BLISTER PACK (51079-051-01) ",
"NDC11Code": "51079-0051-20",
"ProductNDC": "51079-051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20110223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090970",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110223",
"SamplePackage": "N",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets USP, a PPI, is a substituted benzimidazole, sodium salt of 5-(Difluoromethoxy)-2-[[(3,4-dimethoxy-2-Pyridinyl)methyl]sulfinyl]-1 H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C 16H 14F 2N 3NaO 4S x 1.5 H 2O, with a molecular weight of 432.36. The structural formula is:. Pantoprazole sodium sesquihydrate is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium sesquihydrate is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium is supplied as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.55 mg of pantoprazole sodium) and 40 mg pantoprazole (equivalent to 45.10 mg of pantoprazole sodium). Pantoprazole sodium delayed-release tablets contain the following inactive ingredients: anhydrous sodium carbonate, calcium stearate, crospovidone, hypromellose, mannitol, methacrylic acid copolymer type A, povidone, propylene glycol, titanium dioxide, triethyl citrate and yellow iron oxide. The black imprinting ink contains black iron oxide, propylene glycol and shellac glaze. Meets USP Dissolution Test 3."
},
{
"NDCCode": "51079-058-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-058-20) / 1 TABLET in 1 BLISTER PACK (51079-058-01) ",
"NDC11Code": "51079-0058-20",
"ProductNDC": "51079-058",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorthalidone",
"NonProprietaryName": "Chlorthalidone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19980612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086831",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "CHLORTHALIDONE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis [PE], Thiazide-like Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19980612",
"SamplePackage": "N",
"IndicationAndUsage": "Diuretics such as chlorthalidone are indicated in the management of hypertension either as the sole therapeutic agent or to enhance the effect of other antihypertensive drugs in the more severe forms of hypertension. Chlorthalidone is indicated as adjunctive therapy in edema associated with congestive heart failure, hepatic cirrhosis, and corticosteroid and estrogen therapy. Chlorthalidone has also been found useful in edema due to various forms of renal dysfunction, such as nephrotic syndrome, acute glomerulonephritis, and chronic renal failure.",
"Description": "Chlorthalidone an oral antihypertensive/diuretic. It is a monosulfamyl diuretic that differs chemically from thiazide diuretics in that a double-ring system is incorporated in its structure. It is 2-Chloro-5-(1-hydroxy-3-oxo-1-isoindolinyl)benzenesulfonamide with the following structural formula. Chlorthalidone, USP is practically insoluble in water, in ether, and in chloroform; soluble in methanol; slightly soluble in ethanol. Chlorthalidone tablets are available containing either 25 mg or 50 mg of chlorthalidone, USP and the following inactive ingredients: colloidal silicon dioxide, D&C Yellow No.10 Aluminum Lake, microcrystalline cellulose, pregelatinized starch (corn), sodium starch glycolate (potato), stearic acid. The 50 mg tablets also contain FD&C Blue No.1 Aluminum Lake."
},
{
"NDCCode": "51079-067-20",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (51079-067-20) > 1 TABLET in 1 BLISTER PACK (51079-067-01)",
"NDC11Code": "51079-0067-20",
"ProductNDC": "51079-067",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diphenoxylate Hydrochloride And Atropine Sulfate",
"NonProprietaryName": "Diphenoxylate Hydrochloride And Atropine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130514",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085762",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "ATROPINE SULFATE; DIPHENOXYLATE HYDROCHLORIDE",
"StrengthNumber": ".025; 2.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Antidiarrheal [EPC],Anticholinergic [EPC],Cholinergic Antagonists [MoA],Cholinergic Muscarinic Antagonist [EPC],Cholinergic Muscarinic Antagonists [MoA]",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2015-07-31"
},
{
"NDCCode": "51079-072-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-072-20) / 1 TABLET in 1 BLISTER PACK (51079-072-01) ",
"NDC11Code": "51079-0072-20",
"ProductNDC": "51079-072",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19970206",
"EndMarketingDate": "20240731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018487",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19970206",
"EndMarketingDatePackage": "20240731",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-Chloro- N-furfuryl-5-sulfamoylanthranilic acid. Furosemide, USP is a white to slightly yellow odorless, crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each tablet for oral administration contains 20 mg, 40 mg or 80 mg of furosemide, USP and the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, pregelatinized starch (corn) and stearic acid."
},
{
"NDCCode": "51079-073-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-073-20) / 1 TABLET in 1 BLISTER PACK (51079-073-01) ",
"NDC11Code": "51079-0073-20",
"ProductNDC": "51079-073",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19970206",
"EndMarketingDate": "20240831",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018487",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19970206",
"EndMarketingDatePackage": "20240831",
"SamplePackage": "N",
"IndicationAndUsage": "Furosemide is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.",
"Description": "Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-Chloro- N-furfuryl-5-sulfamoylanthranilic acid. Furosemide, USP is a white to slightly yellow odorless, crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each tablet for oral administration contains 20 mg, 40 mg or 80 mg of furosemide, USP and the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, pregelatinized starch (corn) and stearic acid."
},
{
"NDCCode": "51079-074-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-074-20) / 1 TABLET in 1 BLISTER PACK (51079-074-01) ",
"NDC11Code": "51079-0074-20",
"ProductNDC": "51079-074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089097",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20071226",
"SamplePackage": "N",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "Hydralazine Hydrochloride Tablets USP is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. C 8H 8N 4·HCl M.W. 196.64. Hydralazine hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg or 100 mg hydralazine hydrochloride, USP. Tablets also contain anhydrous lactose, FD&C yellow no. 6 aluminum lake, microcrystalline cellulose, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "51079-075-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-075-20) / 1 TABLET in 1 BLISTER PACK (51079-075-01) ",
"NDC11Code": "51079-0075-20",
"ProductNDC": "51079-075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088467",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20071226",
"SamplePackage": "N",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "Hydralazine Hydrochloride Tablets USP is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. C 8H 8N 4·HCl M.W. 196.64. Hydralazine hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg or 100 mg hydralazine hydrochloride, USP. Tablets also contain anhydrous lactose, FD&C yellow no. 6 aluminum lake, microcrystalline cellulose, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "51079-076-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-076-20) / 1 TABLET in 1 BLISTER PACK (51079-076-01) ",
"NDC11Code": "51079-0076-20",
"ProductNDC": "51079-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088468",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20071226",
"SamplePackage": "N",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "Hydralazine Hydrochloride Tablets USP is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. C 8H 8N 4·HCl M.W. 196.64. Hydralazine hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg or 100 mg hydralazine hydrochloride, USP. Tablets also contain anhydrous lactose, FD&C yellow no. 6 aluminum lake, microcrystalline cellulose, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "51079-077-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-077-20) > 1 CAPSULE in 1 BLISTER PACK (51079-077-01) ",
"NDC11Code": "51079-0077-20",
"ProductNDC": "51079-077",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Pamoate",
"NonProprietaryName": "Hydroxyzine Pamoate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20071126",
"EndMarketingDate": "20210430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088496",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "HYDROXYZINE PAMOATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20071126",
"EndMarketingDatePackage": "20210430",
"SamplePackage": "N"
},
{
"NDCCode": "51079-078-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-078-20) > 1 CAPSULE in 1 BLISTER PACK (51079-078-01) ",
"NDC11Code": "51079-0078-20",
"ProductNDC": "51079-078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Pamoate",
"NonProprietaryName": "Hydroxyzine Pamoate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20071126",
"EndMarketingDate": "20210831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088487",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "HYDROXYZINE PAMOATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20071126",
"EndMarketingDatePackage": "20210831",
"SamplePackage": "N"
},
{
"NDCCode": "51079-083-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-083-20) / 1 TABLET in 1 BLISTER PACK (51079-083-01) ",
"NDC11Code": "51079-0083-20",
"ProductNDC": "51079-083",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isoniazid",
"NonProprietaryName": "Isoniazid",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19940609",
"EndMarketingDate": "20261130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080937",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "ISONIAZID",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimycobacterial [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19940609",
"EndMarketingDatePackage": "20261130",
"SamplePackage": "N",
"IndicationAndUsage": "Isoniazid tablets, USP are recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid or any other medication, is inadequate therapy. Isoniazid tablets, USP are recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis): 1 Persons with human immunodeficiency virus (HIV) infection (greater than or equal to 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculin-negative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy., 2 Close contacts of persons with newly diagnosed infectious tuberculosis (greater than or equal to 5 mm). In addition, tuberculin-negative (less than 5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (greater than 5 mm), therapy should be continued., 3 Recent converters, as indicated by a tuberculin skin test (greater than or equal to 10 mm increase within a 2-year period for those less than 35 years old; greater than or equal to 15 mm increase for those greater than or equal to 35 years of age). All infants and children younger than 4 years of age with a greater than 10 mm skin test are included in this category., 4 Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (greater than or equal to 5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly., 5 Intravenous drug users known to be HIV-seronegative (greater than 10 mm)., 6 Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (greater than or equal to 10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin’s disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state [with or without weight loss], chronic peptic ulcer disease, chronic malabsorption syndromes and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly.",
"Description": "Isoniazid, USP is an antibacterial available as 100 mg and 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: colloidal silicon dioxide, crospovidone, hydrogenated vegetable oil, microcrystalline cellulose, pregelatinized corn starch and talc. Isoniazid, USP is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has the following structural formula. C 6H 7N 3O M.W. 137.14. Isoniazid, USP is odorless, and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid, USP is slowly affected by exposure to air and light."
},
{
"NDCCode": "51079-086-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-086-20) / 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-086-01) ",
"NDC11Code": "51079-0086-20",
"ProductNDC": "51079-086",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20030801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076122",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20030801",
"SamplePackage": "N",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .",
"Description": "Mirtazapine tablets, USP contain mirtazapine. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-Hexahydro-2-methylpyrazino[2,1-a]pyrido[2,3-c]benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.36. The structural formula is the following and it is the racemic mixture:. Mirtazapine, USP is a white to creamy white crystalline powder which is slightly soluble in water. Mirtazapine tablets are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine, and unscored film-coated tablets containing 45 mg of mirtazapine. Each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch (corn), sodium lauryl sulfate, titanium dioxide and triacetin."
},
{
"NDCCode": "51079-087-20",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (51079-087-20) / 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-087-01) ",
"NDC11Code": "51079-0087-20",
"ProductNDC": "51079-087",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20030801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076122",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20030801",
"SamplePackage": "N",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .",
"Description": "Mirtazapine tablets, USP contain mirtazapine. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-Hexahydro-2-methylpyrazino[2,1-a]pyrido[2,3-c]benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.36. The structural formula is the following and it is the racemic mixture:. Mirtazapine, USP is a white to creamy white crystalline powder which is slightly soluble in water. Mirtazapine tablets are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine, and unscored film-coated tablets containing 45 mg of mirtazapine. Each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch (corn), sodium lauryl sulfate, titanium dioxide and triacetin."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>51079-284-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-284-20) / 1 TABLET in 1 BLISTER PACK (51079-284-01) </PackageDescription>
<NDC11Code>51079-0284-20</NDC11Code>
<ProductNDC>51079-284</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19971031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070325</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-Chloro-1,3-dihydro-1-methyl-5-phenyl-2 H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The molecular formula is C 16H 13ClN 2O and the molecular weight is 284.7. The structural formula is as follows:. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam, USP. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The 5 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake. The 10 mg tablets also contain D&C Yellow No. 10 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46122-284-60</NDCCode>
<PackageDescription>20 BLISTER PACK in 1 CARTON (46122-284-60) > 1 GUM, CHEWING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46122-0284-60</NDC11Code>
<ProductNDC>46122-284</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Good Neighbor Pharmacy Nicotine</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>GUM, CHEWING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141202</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076777</ApplicationNumber>
<LabelerName>Amerisource Bergen</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141202</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>57687-284-20</NDCCode>
<PackageDescription>20 mL in 1 BOTTLE, DROPPER (57687-284-20) </PackageDescription>
<NDC11Code>57687-0284-20</NDC11Code>
<ProductNDC>57687-284</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bach Original Flower Remedies</ProprietaryName>
<NonProprietaryName>Aesculus Hippocastanum Flower</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Nelson Bach USA Limited</LabelerName>
<SubstanceName>AESCULUS HIPPOCASTANUM FLOWER</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>[hp_X]/.095mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2020-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For relief of naturally occurring simple nervous tension.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63323-284-20</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-284-20) / 20 mL in 1 VIAL (63323-284-01) </PackageDescription>
<NDC11Code>63323-0284-20</NDC11Code>
<ProductNDC>63323-284</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20000920</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000920</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*, 38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>63323-284-21</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-284-21) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>63323-0284-21</NDC11Code>
<ProductNDC>63323-284</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20000920</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000920</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, vancomycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, and skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis) , vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. The parenteral form of vancomycin may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infection.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP is a lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). Vancomycin hydrochloride has the following structural formula:. C 66H 75Cl 2N 9O 24 HCl M.W. 1485.73.</Description>
</NDC>
<NDC>
<NDCCode>63323-284-26</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-284-26) / 20 mL in 1 VIAL (63323-284-42) </PackageDescription>
<NDC11Code>63323-0284-26</NDC11Code>
<ProductNDC>63323-284</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210503</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>63323-284-45</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-284-45) > 20 mL in 1 VIAL (63323-284-41) </PackageDescription>
<NDC11Code>63323-0284-45</NDC11Code>
<ProductNDC>63323-284</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20171026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204107</ApplicationNumber>
<LabelerName>Fresenius Kabi, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-a-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>66220-284-22</NDCCode>
<PackageDescription>20 BAG in 1 CASE (66220-284-22) / 200 mL in 1 BAG (66220-284-11) </PackageDescription>
<NDC11Code>66220-0284-22</NDC11Code>
<ProductNDC>66220-284</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Caldolor</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022348</ApplicationNumber>
<LabelerName>Cumberland Pharmaceuticals Inc.</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/200mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CALDOLOR is indicated in adults and pediatric patients aged 3 months and older for the: : 1 management of mild to moderate pain, including postoperative pain , 2 management of moderate to severe pain, including postoperative pain, as an adjunct to opioid analgesics , 3 reduction of fever .</IndicationAndUsage>
<Description>CALDOLOR (ibuprofen injection) is a nonsteroidal anti-inflammatory drug, available as an 800 mg/8 mL single dose vial (100 mg/mL) and 800 mg/200 mL (4 mg/mL) polypropylene, single dose, ready-to-use, flexible bag for intravenous administration. The chemical name is ibuprofen, which is (±)-2-(p-isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74°C to 77°C. It has a molecular weight of 206.28. It is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula of ibuprofen is represented below:.</Description>
</NDC>
<NDC>
<NDCCode>85766-284-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (85766-284-20) </PackageDescription>
<NDC11Code>85766-0284-20</NDC11Code>
<ProductNDC>85766-284</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorzoxazone</ProprietaryName>
<NonProprietaryName>Chlorzoxazone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230817</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089853</ApplicationNumber>
<LabelerName>Sportpharm LLC</LabelerName>
<SubstanceName>CHLORZOXAZONE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>Each 375 mg chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg. Chemical Name: 5-Chloro-2-benzoxazolinone. Structural Formula. Molecular Formula: C 7H 4ClNO 2. Molecular Weight: 169.56. Chlorzoxazone, USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone USP is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients. 375 mg contains colloidal silicon dioxide, corn starch, croscarmellose sodium, docusate sodium with sodium benzoate, lactose monohydrate, magnesium stearate and microcrystalline cellulose. 500 mg contains D&C Red 27/Phloxine Aluminium lake, FD&C Yellow 6/Sunset Yellow FCF Aluminium lake, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polysorbate 80, pregelatinized starch, sodium starch glycolate. 750 mg contains colloidal silicon dioxide, corn starch, croscarmellose sodium, docusate sodium with sodium benzoate, lactose monohydrate, magnesium stearate and microcrystalline cellulose. Meets USP dissolution test 5 for 500 mg. FDA approved dissolution method differs from that of the USP for 375 mg and 750 mg.</Description>
</NDC>
<NDC>
<NDCCode>51079-007-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-007-20) > 1 CAPSULE, DELAYED RELEASE in 1 BLISTER PACK (51079-007-01) </PackageDescription>
<NDC11Code>51079-0007-20</NDC11Code>
<ProductNDC>51079-007</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075876</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51079-023-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-023-20) / 1 TABLET in 1 BLISTER PACK (51079-023-01) </PackageDescription>
<NDC11Code>51079-0023-20</NDC11Code>
<ProductNDC>51079-023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metolazone</ProprietaryName>
<NonProprietaryName>Metolazone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076698</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>METOLAZONE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE], Thiazide-like Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metolazone tablets are indicated for the treatment of salt and water retention including: 1 edema accompanying congestive heart failure; , 2 edema accompanying renal diseases, including the nephrotic syndrome and states of diminished renal function. .</IndicationAndUsage>
<Description>Metolazone Tablets, USP for oral administration contain 2.5 mg, 5 mg or 10 mg of metolazone, USP, a diuretic/saluretic/antihypertensive drug of the quinazoline class. Metolazone has the molecular formula C 16H 16ClN 3O 3S, the chemical name 7-chloro-1, 2, 3, 4-tetrahydro-2-methyl-3-(2-methylphenyl)-4-oxo-6-quinazolinesulfonamide, and a molecular weight of 365.83. The structural formula is:. Metolazone is only sparingly soluble in water, but more soluble in plasma, blood, alkali, and organic solvents. Inactive Ingredients: colloidal silicon dioxide, FD&C Yellow #6 Lake HT, magnesium stearate and microcrystalline cellulose. In addition, the 10 mg strength contains D&C Yellow #10 Lake HT and FD&C Blue #2 Lake HT. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>51079-024-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-024-20) / 1 TABLET in 1 BLISTER PACK (51079-024-01) </PackageDescription>
<NDC11Code>51079-0024-20</NDC11Code>
<ProductNDC>51079-024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metolazone</ProprietaryName>
<NonProprietaryName>Metolazone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076698</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>METOLAZONE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE], Thiazide-like Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metolazone tablets are indicated for the treatment of salt and water retention including: 1 edema accompanying congestive heart failure; , 2 edema accompanying renal diseases, including the nephrotic syndrome and states of diminished renal function. .</IndicationAndUsage>
<Description>Metolazone Tablets, USP for oral administration contain 2.5 mg, 5 mg or 10 mg of metolazone, USP, a diuretic/saluretic/antihypertensive drug of the quinazoline class. Metolazone has the molecular formula C 16H 16ClN 3O 3S, the chemical name 7-chloro-1, 2, 3, 4-tetrahydro-2-methyl-3-(2-methylphenyl)-4-oxo-6-quinazolinesulfonamide, and a molecular weight of 365.83. The structural formula is:. Metolazone is only sparingly soluble in water, but more soluble in plasma, blood, alkali, and organic solvents. Inactive Ingredients: colloidal silicon dioxide, FD&C Yellow #6 Lake HT, magnesium stearate and microcrystalline cellulose. In addition, the 10 mg strength contains D&C Yellow #10 Lake HT and FD&C Blue #2 Lake HT. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>51079-027-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (51079-027-20) > 1 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (51079-027-01)</PackageDescription>
<NDC11Code>51079-0027-20</NDC11Code>
<ProductNDC>51079-027</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinidine Gluconate</ProprietaryName>
<NonProprietaryName>Quinidine Gluconate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110823</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089338</ApplicationNumber>
<LabelerName>UDL Laboratories, Inc.</LabelerName>
<SubstanceName>QUINIDINE GLUCONATE</SubstanceName>
<StrengthNumber>324</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC],Cytochrome P450 2D6 Inhibitor [EPC],Cytochrome P450 2D6 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-04-10</LastUpdate>
</NDC>
<NDC>
<NDCCode>51079-028-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-028-20) / 1 CAPSULE in 1 BLISTER PACK (51079-028-01) </PackageDescription>
<NDC11Code>51079-0028-20</NDC11Code>
<ProductNDC>51079-028</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tacrolimus</ProprietaryName>
<NonProprietaryName>Tacrolimus</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090596</ApplicationNumber>
<LabelerName>MylanInstitutional Inc.</LabelerName>
<SubstanceName>TACROLIMUS</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tacrolimus capsules are a calcineurin-inhibitor immunosuppressant indicated for the prophylaxis of organ rejection in adult patients receiving allogeneic liver, kidney, or heart transplants, and pediatric patients receiving allogenic liver transplants in combination with other immunosuppressants. ( 1.1).</IndicationAndUsage>
<Description>Tacrolimus, previously known as FK506, is the active ingredient in tacrolimus capsules. Tacrolimus is a calcineurin-inhibitor immunosuppressant produced by Streptomyces tsukubaensis. Chemically, tacrolimus is designated as (‒)-(3S,4R,5S,8R,9E,12S,14S,15R,16S,18R,19R,26aS)-8-Allyl-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[(E)-2-[(1R,3R,4R)-4-hydroxy-3-methoxycyclohexyl]-1-methylvinyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone monohydrate. The chemical structure of tacrolimus is. Tacrolimus has a molecular formula of C 44H 69NO 12H 2O and a formula weight of 822.03. Tacrolimus, USP appears as a white to off-white powder. It is insoluble in water, very soluble in ethanol, and soluble in methanol and chloroform. Tacrolimus capsules, USP are available for oral administration as capsules containing the equivalent of 0.5 mg, 1 mg or 5 mg of anhydrous tacrolimus. Inactive ingredients include anhydrous lactose, black iron oxide, colloidal silicon dioxide, croscarmellose sodium, gelatin, hypromellose, lactose monohydrate, magnesium stearate, sodium lauryl sulfate, titanium dioxide and yellow iron oxide. The 0.5 mg capsules also contain D&C Red No. 28, D&C Yellow No. 10 and FD&C Red No. 40, the 1 mg capsules also contain FD&C Blue No. 1 and FD&C Red No. 3 and the 5 mg capsules also contain D&C Red No. 33, D&C Red No. 28 and D&C Yellow No. 10. In addition, the black imprinting ink contains black iron oxide, D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>51079-034-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (51079-034-20) > 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-034-01)</PackageDescription>
<NDC11Code>51079-0034-20</NDC11Code>
<ProductNDC>51079-034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076276</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-04-17</LastUpdate>
</NDC>
<NDC>
<NDCCode>51079-035-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (51079-035-20) > 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-035-01)</PackageDescription>
<NDC11Code>51079-0035-20</NDC11Code>
<ProductNDC>51079-035</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076276</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-04-17</LastUpdate>
</NDC>
<NDC>
<NDCCode>51079-047-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-047-20) > 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (51079-047-01) </PackageDescription>
<NDC11Code>51079-0047-20</NDC11Code>
<ProductNDC>51079-047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090942</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110323</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51079-051-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-051-20) / 1 TABLET, DELAYED RELEASE in 1 BLISTER PACK (51079-051-01) </PackageDescription>
<NDC11Code>51079-0051-20</NDC11Code>
<ProductNDC>51079-051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090970</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets USP, a PPI, is a substituted benzimidazole, sodium salt of 5-(Difluoromethoxy)-2-[[(3,4-dimethoxy-2-Pyridinyl)methyl]sulfinyl]-1 H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C 16H 14F 2N 3NaO 4S x 1.5 H 2O, with a molecular weight of 432.36. The structural formula is:. Pantoprazole sodium sesquihydrate is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium sesquihydrate is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium is supplied as a delayed-release tablet, available in two strengths 20 mg pantoprazole (equivalent to 22.55 mg of pantoprazole sodium) and 40 mg pantoprazole (equivalent to 45.10 mg of pantoprazole sodium). Pantoprazole sodium delayed-release tablets contain the following inactive ingredients: anhydrous sodium carbonate, calcium stearate, crospovidone, hypromellose, mannitol, methacrylic acid copolymer type A, povidone, propylene glycol, titanium dioxide, triethyl citrate and yellow iron oxide. The black imprinting ink contains black iron oxide, propylene glycol and shellac glaze. Meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>51079-058-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-058-20) / 1 TABLET in 1 BLISTER PACK (51079-058-01) </PackageDescription>
<NDC11Code>51079-0058-20</NDC11Code>
<ProductNDC>51079-058</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorthalidone</ProprietaryName>
<NonProprietaryName>Chlorthalidone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19980612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086831</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>CHLORTHALIDONE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE], Thiazide-like Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19980612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diuretics such as chlorthalidone are indicated in the management of hypertension either as the sole therapeutic agent or to enhance the effect of other antihypertensive drugs in the more severe forms of hypertension. Chlorthalidone is indicated as adjunctive therapy in edema associated with congestive heart failure, hepatic cirrhosis, and corticosteroid and estrogen therapy. Chlorthalidone has also been found useful in edema due to various forms of renal dysfunction, such as nephrotic syndrome, acute glomerulonephritis, and chronic renal failure.</IndicationAndUsage>
<Description>Chlorthalidone an oral antihypertensive/diuretic. It is a monosulfamyl diuretic that differs chemically from thiazide diuretics in that a double-ring system is incorporated in its structure. It is 2-Chloro-5-(1-hydroxy-3-oxo-1-isoindolinyl)benzenesulfonamide with the following structural formula. Chlorthalidone, USP is practically insoluble in water, in ether, and in chloroform; soluble in methanol; slightly soluble in ethanol. Chlorthalidone tablets are available containing either 25 mg or 50 mg of chlorthalidone, USP and the following inactive ingredients: colloidal silicon dioxide, D&C Yellow No.10 Aluminum Lake, microcrystalline cellulose, pregelatinized starch (corn), sodium starch glycolate (potato), stearic acid. The 50 mg tablets also contain FD&C Blue No.1 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>51079-067-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (51079-067-20) > 1 TABLET in 1 BLISTER PACK (51079-067-01)</PackageDescription>
<NDC11Code>51079-0067-20</NDC11Code>
<ProductNDC>51079-067</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diphenoxylate Hydrochloride And Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Diphenoxylate Hydrochloride And Atropine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130514</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085762</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>ATROPINE SULFATE; DIPHENOXYLATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.025; 2.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Antidiarrheal [EPC],Anticholinergic [EPC],Cholinergic Antagonists [MoA],Cholinergic Muscarinic Antagonist [EPC],Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2015-07-31</LastUpdate>
</NDC>
<NDC>
<NDCCode>51079-072-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-072-20) / 1 TABLET in 1 BLISTER PACK (51079-072-01) </PackageDescription>
<NDC11Code>51079-0072-20</NDC11Code>
<ProductNDC>51079-072</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19970206</StartMarketingDate>
<EndMarketingDate>20240731</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018487</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19970206</StartMarketingDatePackage>
<EndMarketingDatePackage>20240731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-Chloro- N-furfuryl-5-sulfamoylanthranilic acid. Furosemide, USP is a white to slightly yellow odorless, crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each tablet for oral administration contains 20 mg, 40 mg or 80 mg of furosemide, USP and the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, pregelatinized starch (corn) and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>51079-073-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-073-20) / 1 TABLET in 1 BLISTER PACK (51079-073-01) </PackageDescription>
<NDC11Code>51079-0073-20</NDC11Code>
<ProductNDC>51079-073</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19970206</StartMarketingDate>
<EndMarketingDate>20240831</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018487</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19970206</StartMarketingDatePackage>
<EndMarketingDatePackage>20240831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Furosemide is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver, and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired.</IndicationAndUsage>
<Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically, it is 4-Chloro- N-furfuryl-5-sulfamoylanthranilic acid. Furosemide, USP is a white to slightly yellow odorless, crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Each tablet for oral administration contains 20 mg, 40 mg or 80 mg of furosemide, USP and the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, microcrystalline cellulose, pregelatinized starch (corn) and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>51079-074-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-074-20) / 1 TABLET in 1 BLISTER PACK (51079-074-01) </PackageDescription>
<NDC11Code>51079-0074-20</NDC11Code>
<ProductNDC>51079-074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089097</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>Hydralazine Hydrochloride Tablets USP is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. C 8H 8N 4·HCl M.W. 196.64. Hydralazine hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg or 100 mg hydralazine hydrochloride, USP. Tablets also contain anhydrous lactose, FD&C yellow no. 6 aluminum lake, microcrystalline cellulose, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>51079-075-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-075-20) / 1 TABLET in 1 BLISTER PACK (51079-075-01) </PackageDescription>
<NDC11Code>51079-0075-20</NDC11Code>
<ProductNDC>51079-075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088467</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>Hydralazine Hydrochloride Tablets USP is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. C 8H 8N 4·HCl M.W. 196.64. Hydralazine hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg or 100 mg hydralazine hydrochloride, USP. Tablets also contain anhydrous lactose, FD&C yellow no. 6 aluminum lake, microcrystalline cellulose, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>51079-076-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-076-20) / 1 TABLET in 1 BLISTER PACK (51079-076-01) </PackageDescription>
<NDC11Code>51079-0076-20</NDC11Code>
<ProductNDC>51079-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088468</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20071226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>Hydralazine Hydrochloride Tablets USP is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. C 8H 8N 4·HCl M.W. 196.64. Hydralazine hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg or 100 mg hydralazine hydrochloride, USP. Tablets also contain anhydrous lactose, FD&C yellow no. 6 aluminum lake, microcrystalline cellulose, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>51079-077-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-077-20) > 1 CAPSULE in 1 BLISTER PACK (51079-077-01) </PackageDescription>
<NDC11Code>51079-0077-20</NDC11Code>
<ProductNDC>51079-077</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Pamoate</ProprietaryName>
<NonProprietaryName>Hydroxyzine Pamoate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071126</StartMarketingDate>
<EndMarketingDate>20210430</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088496</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>HYDROXYZINE PAMOATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20071126</StartMarketingDatePackage>
<EndMarketingDatePackage>20210430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51079-078-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-078-20) > 1 CAPSULE in 1 BLISTER PACK (51079-078-01) </PackageDescription>
<NDC11Code>51079-0078-20</NDC11Code>
<ProductNDC>51079-078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Pamoate</ProprietaryName>
<NonProprietaryName>Hydroxyzine Pamoate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071126</StartMarketingDate>
<EndMarketingDate>20210831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088487</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>HYDROXYZINE PAMOATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20071126</StartMarketingDatePackage>
<EndMarketingDatePackage>20210831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51079-083-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-083-20) / 1 TABLET in 1 BLISTER PACK (51079-083-01) </PackageDescription>
<NDC11Code>51079-0083-20</NDC11Code>
<ProductNDC>51079-083</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isoniazid</ProprietaryName>
<NonProprietaryName>Isoniazid</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19940609</StartMarketingDate>
<EndMarketingDate>20261130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080937</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>ISONIAZID</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimycobacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19940609</StartMarketingDatePackage>
<EndMarketingDatePackage>20261130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isoniazid tablets, USP are recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid or any other medication, is inadequate therapy. Isoniazid tablets, USP are recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis): 1 Persons with human immunodeficiency virus (HIV) infection (greater than or equal to 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculin-negative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy., 2 Close contacts of persons with newly diagnosed infectious tuberculosis (greater than or equal to 5 mm). In addition, tuberculin-negative (less than 5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (greater than 5 mm), therapy should be continued., 3 Recent converters, as indicated by a tuberculin skin test (greater than or equal to 10 mm increase within a 2-year period for those less than 35 years old; greater than or equal to 15 mm increase for those greater than or equal to 35 years of age). All infants and children younger than 4 years of age with a greater than 10 mm skin test are included in this category., 4 Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (greater than or equal to 5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly., 5 Intravenous drug users known to be HIV-seronegative (greater than 10 mm)., 6 Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (greater than or equal to 10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin’s disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state [with or without weight loss], chronic peptic ulcer disease, chronic malabsorption syndromes and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly.</IndicationAndUsage>
<Description>Isoniazid, USP is an antibacterial available as 100 mg and 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: colloidal silicon dioxide, crospovidone, hydrogenated vegetable oil, microcrystalline cellulose, pregelatinized corn starch and talc. Isoniazid, USP is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has the following structural formula. C 6H 7N 3O M.W. 137.14. Isoniazid, USP is odorless, and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid, USP is slowly affected by exposure to air and light.</Description>
</NDC>
<NDC>
<NDCCode>51079-086-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-086-20) / 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-086-01) </PackageDescription>
<NDC11Code>51079-0086-20</NDC11Code>
<ProductNDC>51079-086</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076122</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .</IndicationAndUsage>
<Description>Mirtazapine tablets, USP contain mirtazapine. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-Hexahydro-2-methylpyrazino[2,1-a]pyrido[2,3-c]benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.36. The structural formula is the following and it is the racemic mixture:. Mirtazapine, USP is a white to creamy white crystalline powder which is slightly soluble in water. Mirtazapine tablets are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine, and unscored film-coated tablets containing 45 mg of mirtazapine. Each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch (corn), sodium lauryl sulfate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>51079-087-20</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (51079-087-20) / 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-087-01) </PackageDescription>
<NDC11Code>51079-0087-20</NDC11Code>
<ProductNDC>51079-087</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076122</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .</IndicationAndUsage>
<Description>Mirtazapine tablets, USP contain mirtazapine. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-Hexahydro-2-methylpyrazino[2,1-a]pyrido[2,3-c]benzazepine and has the molecular formula of C 17H 19N 3. Its molecular weight is 265.36. The structural formula is the following and it is the racemic mixture:. Mirtazapine, USP is a white to creamy white crystalline powder which is slightly soluble in water. Mirtazapine tablets are available for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine, and unscored film-coated tablets containing 45 mg of mirtazapine. Each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch (corn), sodium lauryl sulfate, titanium dioxide and triacetin.</Description>
</NDC>
</NDCList>