{
"NDC": [
{
"NDCCode": "51655-972-49",
"PackageDescription": "42 TABLET in 1 BOTTLE, PLASTIC (51655-972-49) ",
"NDC11Code": "51655-0972-49",
"ProductNDC": "51655-972",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208412",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230517",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets USP are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "49035-972-49",
"PackageDescription": "44.4 mL in 1 BOTTLE (49035-972-49) ",
"NDC11Code": "49035-0972-49",
"ProductNDC": "49035-972",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Equate Sunscreen Spf 50 Sport",
"ProprietaryNameSuffix": "Broad Spectrum",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene.",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20170110",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "WAL-MART STORES INC",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "30; 100; 45; 80",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2023-02-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190327",
"SamplePackage": "N"
},
{
"NDCCode": "51655-410-49",
"PackageDescription": "42 TABLET in 1 BOTTLE (51655-410-49) ",
"NDC11Code": "51655-0410-49",
"ProductNDC": "51655-410",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140428",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085162",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140428",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets, USP are indicated in the following conditions. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance); congenital adrenal hyperplasia; hypercalcemia associated with cancer; nonsuppurative thyroiditis. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: psoriatic arthritis, rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy), ankylosing spondylitis, acute and subacute bursitis, acute nonspecific tenosynovitis, acute gouty arthritis, post-traumatic osteoarthritis, synovitis of osteoarthritis, epicondylitis. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of: systemic lupus erythematosus, systemic dermatomyositis (polymyositis), acute rheumatic carditis. Dermatologic Diseases. Pemphigus; bullous dermatitis herpetiformis; severe erythema multiforme (Stevens-Johnson syndrome); exfoliative dermatitis; mycosis fungoides; severe psoriasis; severe seborrheic dermatitis. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: seasonal or perennial allergic rhinitis; bronchial asthma; contact dermatitis; atopic dermatitis; serum sickness; drug hypersensitivity reactions. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: allergic corneal marginal ulcers, herpes zoster ophthalmicus, anterior segment inflammation, diffuse posterior uveitis and choroiditis, sympathetic ophthalmia, allergic conjunctivitis, keratitis, chorioretinitis, optic neuritis, iritis and iridocyclitis. Respiratory Diseases. Symptomatic sarcoidosis; Loeffler’s syndrome not manageable by other means; berylliosis; fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy; aspiration pneumonitis. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults; secondary thrombocytopenia in adults; acquired (autoimmune) hemolytic anemia; erythroblastopenia (RBC anemia); congenital (erythroid) hypoplastic anemia. Neoplastic Diseases. For palliative management of: leukemias and lymphomas in adults, acute leukemia of childhood. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in: ulcerative colitis, regional enteritis. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy; trichinosis with neurologic or myocardial involvement.",
"Description": "Prednisone tablets, USP contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate, 17,21-dihydroxy-. The structural formula is represented below. C 21H 26O 5 M.W. 358.44. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg of prednisone, USP (anhydrous). In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, crospovidone, docusate sodium, magnesium stearate and sodium benzoate. Prednisone tablets, USP 20 mg also contain FD&C Yellow No. 6."
},
{
"NDCCode": "51655-493-49",
"PackageDescription": "42 TABLET in 1 BOTTLE, PLASTIC (51655-493-49) ",
"NDC11Code": "51655-0493-49",
"ProductNDC": "51655-493",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA084122",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210113",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets and solutions are indicated in the following conditions.",
"Description": "Prednisone is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to partially white, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. The chemical name for prednisone is 17,21-dihydroxypregna-1,4-dienne-3,11,20-trione. The structural formula is represented below. Each tablet, for oral administration, contains 1, 2.5, 5, 10, 20, or 50 mg of prednisone. PredniSONE Oral Solution contains 5 mg prednisone per 5 mL, and PredniSONE Intensol TMOral Solution (Concentrate) contains 5 mg prednisone per mL. Inactive Ingredients. PredniSONE Tablets, USP contain the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate and stearic acid (1 mg, 2.5 mg, and 5 mg only). PredniSONE Oral Solution, USP contains alcohol 5% and the following inactive ingredients: anhydrous citric acid, edetate disodium, fructose, hydrochloric acid, maltol, peppermint oil, polysorbate 80, propylene glycol, saccharin sodium, sodium benzoate, vanilla flavor and purified water. PredniSONE IntensolOral Solution (Concentrate) contains alcohol 30% and the following inactive ingredients: anhydrous citric acid, poloxamer 188, propylene glycol and purified water."
},
{
"NDCCode": "51655-972-20",
"PackageDescription": "20 TABLET in 1 BOTTLE, PLASTIC (51655-972-20) ",
"NDC11Code": "51655-0972-20",
"ProductNDC": "51655-972",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208412",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220922",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets USP are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "51655-972-21",
"PackageDescription": "21 TABLET in 1 BOTTLE, PLASTIC (51655-972-21) ",
"NDC11Code": "51655-0972-21",
"ProductNDC": "51655-972",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208412",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221221",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets USP are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "51655-972-27",
"PackageDescription": "12 TABLET in 1 BOTTLE, PLASTIC (51655-972-27) ",
"NDC11Code": "51655-0972-27",
"ProductNDC": "51655-972",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208412",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230228",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets USP are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "51655-972-51",
"PackageDescription": "40 TABLET in 1 BOTTLE, PLASTIC (51655-972-51) ",
"NDC11Code": "51655-0972-51",
"ProductNDC": "51655-972",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208412",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221007",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets USP are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "51655-972-52",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (51655-972-52) ",
"NDC11Code": "51655-0972-52",
"ProductNDC": "51655-972",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208412",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220923",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets USP are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "51655-972-53",
"PackageDescription": "10 TABLET in 1 BOTTLE, PLASTIC (51655-972-53) ",
"NDC11Code": "51655-0972-53",
"ProductNDC": "51655-972",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208412",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221221",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets USP are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "51655-972-54",
"PackageDescription": "15 TABLET in 1 BOTTLE, PLASTIC (51655-972-54) ",
"NDC11Code": "51655-0972-54",
"ProductNDC": "51655-972",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208412",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221221",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone tablets USP are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "52244-010-02",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (52244-010-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0010-02",
"ProductNDC": "52244-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120415",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "10",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120415",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "52244-010-06",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (52244-010-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0010-06",
"ProductNDC": "52244-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120415",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "10",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120415",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "52244-020-02",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (52244-020-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0020-02",
"ProductNDC": "52244-020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120115",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "20",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120115",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "52244-020-06",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (52244-020-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0020-06",
"ProductNDC": "52244-020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120115",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "20",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120115",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "52244-040-02",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (52244-040-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0040-02",
"ProductNDC": "52244-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120315",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "40",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120315",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "52244-040-06",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (52244-040-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0040-06",
"ProductNDC": "52244-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120315",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "40",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120315",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "51655-005-52",
"PackageDescription": "30 TABLET in 1 BOTTLE (51655-005-52) ",
"NDC11Code": "51655-0005-52",
"ProductNDC": "51655-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phendimetrazine",
"NonProprietaryName": "Phendimetrazine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091042",
"LabelerName": "Northwind Pharmaceuticals",
"SubstanceName": "PHENDIMETRAZINE TARTRATE",
"StrengthNumber": "35",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20150422",
"SamplePackage": "N",
"IndicationAndUsage": "Phendimetrazine tartrate is indicated in the management of exogenous obesity as a short term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. BODY MASS INDEX (BMI), kg/m2 Height (feet, inches) Weight(pounds) 5’0” 5’3” 5’6” 5’9” 6’0” 6’3” 140 27 25 23 21 19 18 150 29 27 24 22 20 19 160 31 28 26 24 22 20 170 33 30 28 25 23 21 180 35 32 29 27 25 23 190 37 34 31 28 26 24 200 39 36 32 30 27 25 210 41 37 34 31 29 26 220 43 39 36 33 30 28 230 45 41 37 34 31 29 240 47 43 39 36 33 30 250 49 44 40 37 34 31 Phendimetrazine tartrate is indicated for use as monotherapy only. Please review the manufacturer's complete drug information available from the FDA at www.fda.gov Permanent Link: https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=07bf3488-09e7-436f-af3f-94c35a7be025.",
"Description": "Phendimetrazine tartrate, as the dextro isomer, has the chemical name of (2S,3S)-3,4-Dimethyl-2-phenylmorpholine L-(+)- tartrate (1:1). The structural formula is available through Permanent Link. C12H17NOC4H6O6 M.W. 341.36. Phendimetrazine tartrate is a white, odorless crystalline powder. It is freely soluble in water; sparingly soluble in warm alcohol, insoluble in chloroform, acetone, ether and benzene. Each white tablet, for oral administration, contains 35 mg of phendimetrazine tartrate. In addition, the following inactive ingredients are present: Colloidal Silicon Dioxide, Lactose Monohydrate, Magnesium Stearate, Microcrystalline Cellulose 102 and Sodium Starch Glycolate. The yellow tablet also contains FD&C Yellow # 5 Aluminum Lake (15-17%). The blue tablet also contains FD&C Blue # 1 Aluminum Lake (11-13%). Please review the manufacturer's complete drug information available from the FDA at www.fda.gov Permanent Link: https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=07bf3488-09e7-436f-af3f-94c35a7be025."
},
{
"NDCCode": "51655-137-26",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (51655-137-26) ",
"NDC11Code": "51655-0137-26",
"ProductNDC": "51655-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20221004",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077534",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230119",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .",
"Description": "Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets."
},
{
"NDCCode": "51655-137-52",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (51655-137-52) ",
"NDC11Code": "51655-0137-52",
"ProductNDC": "51655-137",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20221004",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077534",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221004",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .",
"Description": "Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets."
},
{
"NDCCode": "51655-209-26",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (51655-209-26) ",
"NDC11Code": "51655-0209-26",
"ProductNDC": "51655-209",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20221021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077534",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221021",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .",
"Description": "Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets."
},
{
"NDCCode": "51655-209-52",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (51655-209-52) ",
"NDC11Code": "51655-0209-52",
"ProductNDC": "51655-209",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20221021",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077534",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230103",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .",
"Description": "Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets."
},
{
"NDCCode": "51655-605-26",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (51655-605-26) ",
"NDC11Code": "51655-0605-26",
"ProductNDC": "51655-605",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram Hydrobromide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077031",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220302",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .",
"Description": "Citalopram tablets, USP contains citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram tablets, USP are for oral administration and are available as film-coated round and capsule shaped tablets. The strengths reflect citalopram base equivalent content. The 10 mg, 20 mg, and 40 mg strength tablets contain 12.49 mg, 24.98 mg, and 49.96 mg of citalopram hydrobromide, respectively. The 20 mg and 40 mg tablets are scored. Inactive ingredients: copovidone, corn starch, croscarmellose sodium, lactose monohydrate, magnesium stearate, hypromellose, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Iron oxides are used as coloring agents in the peach (10 mg) and light pink (20 mg) tablets."
},
{
"NDCCode": "51655-605-52",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (51655-605-52) ",
"NDC11Code": "51655-0605-52",
"ProductNDC": "51655-605",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram Hydrobromide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077031",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210401",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .",
"Description": "Citalopram tablets, USP contains citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram tablets, USP are for oral administration and are available as film-coated round and capsule shaped tablets. The strengths reflect citalopram base equivalent content. The 10 mg, 20 mg, and 40 mg strength tablets contain 12.49 mg, 24.98 mg, and 49.96 mg of citalopram hydrobromide, respectively. The 20 mg and 40 mg tablets are scored. Inactive ingredients: copovidone, corn starch, croscarmellose sodium, lactose monohydrate, magnesium stearate, hypromellose, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Iron oxides are used as coloring agents in the peach (10 mg) and light pink (20 mg) tablets."
},
{
"NDCCode": "51655-680-26",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (51655-680-26) ",
"NDC11Code": "51655-0680-26",
"ProductNDC": "51655-680",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram Hydrobromide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220302",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077031",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220504",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .",
"Description": "Citalopram tablets, USP contains citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram tablets, USP are for oral administration and are available as film-coated round and capsule shaped tablets. The strengths reflect citalopram base equivalent content. The 10 mg, 20 mg, and 40 mg strength tablets contain 12.49 mg, 24.98 mg, and 49.96 mg of citalopram hydrobromide, respectively. The 20 mg and 40 mg tablets are scored. Inactive ingredients: copovidone, corn starch, croscarmellose sodium, lactose monohydrate, magnesium stearate, hypromellose, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Iron oxides are used as coloring agents in the peach (10 mg) and light pink (20 mg) tablets."
},
{
"NDCCode": "51655-680-52",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (51655-680-52) ",
"NDC11Code": "51655-0680-52",
"ProductNDC": "51655-680",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram Hydrobromide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220302",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077031",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220302",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .",
"Description": "Citalopram tablets, USP contains citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram tablets, USP are for oral administration and are available as film-coated round and capsule shaped tablets. The strengths reflect citalopram base equivalent content. The 10 mg, 20 mg, and 40 mg strength tablets contain 12.49 mg, 24.98 mg, and 49.96 mg of citalopram hydrobromide, respectively. The 20 mg and 40 mg tablets are scored. Inactive ingredients: copovidone, corn starch, croscarmellose sodium, lactose monohydrate, magnesium stearate, hypromellose, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Iron oxides are used as coloring agents in the peach (10 mg) and light pink (20 mg) tablets."
},
{
"NDCCode": "51655-938-26",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (51655-938-26) ",
"NDC11Code": "51655-0938-26",
"ProductNDC": "51655-938",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077534",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220727",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .",
"Description": "Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets."
},
{
"NDCCode": "51655-938-52",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (51655-938-52) ",
"NDC11Code": "51655-0938-52",
"ProductNDC": "51655-938",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Citalopram",
"NonProprietaryName": "Citalopram",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077534",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "CITALOPRAM HYDROBROMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-03-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220826",
"SamplePackage": "N",
"IndicationAndUsage": "Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .",
"Description": "Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets."
},
{
"NDCCode": "10544-972-30",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (10544-972-30)",
"NDC11Code": "10544-0972-30",
"ProductNDC": "10544-972",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091672",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Omeprazole delayed-release capsule USP is a proton pump inhibitor indicated for:. Treatment in adults of duodenal ulcer ( 1.1) and gastric ulcer ( 1.2). Treatment in adults and children of gastroesophageal reflux disease (GERD) ( 1.3) and maintenance of healing of erosive esophagitis ( 1.4). Pathologic Hypersecretory Conditions ( 1.5). The safety and effectiveness of omeprazole in pediatric patients <1 year of age have not been established. ( 8.4).",
"Description": "The active ingredient in omeprazole delayed-release capsules USP is a substituted benzimidazole, 5-methoxy-¬2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1 H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42. The structural formula is:. Omeprazole USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for omeprazole delayed-release capsules USP, 10 mg contains FD&C Red No. 40, FD&C Yellow No. 6, D&C Yellow No.10, gelatin, FD&C Blue No.1, FD&C Red No. 3, sodium lauryl sulfate and titanium dioxide. The capsule shell for omeprazole delayed-release capsules USP, 20 mg contains FD&C Blue No.1, FD&C Red No.3, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for omeprazole delayed-release capsules USP, 40 mg contains FD&C Red No. 40, FD&C Yellow No. 6, D&C Yellow No.10, gelatin, FD&C Blue No.1, FD&C Red No. 3, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide and potassium hydroxide."
},
{
"NDCCode": "10812-972-01",
"PackageDescription": "1 CARTRIDGE in 1 BLISTER PACK (10812-972-01) > 13 g in 1 CARTRIDGE",
"NDC11Code": "10812-0972-01",
"ProductNDC": "10812-972",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Neutrogena Wet Skin Kids Beach And Pool Sunblock",
"ProprietaryNameSuffix": "Spf 70",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene, And Oxybenzone",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20111205",
"EndMarketingDate": "20160901",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Neutrogena Corporation",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "30; 150; 50; 100; 30",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>51655-972-49</NDCCode>
<PackageDescription>42 TABLET in 1 BOTTLE, PLASTIC (51655-972-49) </PackageDescription>
<NDC11Code>51655-0972-49</NDC11Code>
<ProductNDC>51655-972</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208412</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets USP are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>49035-972-49</NDCCode>
<PackageDescription>44.4 mL in 1 BOTTLE (49035-972-49) </PackageDescription>
<NDC11Code>49035-0972-49</NDC11Code>
<ProductNDC>49035-972</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Equate Sunscreen Spf 50 Sport</ProprietaryName>
<ProprietaryNameSuffix>Broad Spectrum</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene.</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20170110</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>WAL-MART STORES INC</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>30; 100; 45; 80</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-02-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190327</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51655-410-49</NDCCode>
<PackageDescription>42 TABLET in 1 BOTTLE (51655-410-49) </PackageDescription>
<NDC11Code>51655-0410-49</NDC11Code>
<ProductNDC>51655-410</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140428</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085162</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140428</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets, USP are indicated in the following conditions. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance); congenital adrenal hyperplasia; hypercalcemia associated with cancer; nonsuppurative thyroiditis. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: psoriatic arthritis, rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy), ankylosing spondylitis, acute and subacute bursitis, acute nonspecific tenosynovitis, acute gouty arthritis, post-traumatic osteoarthritis, synovitis of osteoarthritis, epicondylitis. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of: systemic lupus erythematosus, systemic dermatomyositis (polymyositis), acute rheumatic carditis. Dermatologic Diseases. Pemphigus; bullous dermatitis herpetiformis; severe erythema multiforme (Stevens-Johnson syndrome); exfoliative dermatitis; mycosis fungoides; severe psoriasis; severe seborrheic dermatitis. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: seasonal or perennial allergic rhinitis; bronchial asthma; contact dermatitis; atopic dermatitis; serum sickness; drug hypersensitivity reactions. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: allergic corneal marginal ulcers, herpes zoster ophthalmicus, anterior segment inflammation, diffuse posterior uveitis and choroiditis, sympathetic ophthalmia, allergic conjunctivitis, keratitis, chorioretinitis, optic neuritis, iritis and iridocyclitis. Respiratory Diseases. Symptomatic sarcoidosis; Loeffler’s syndrome not manageable by other means; berylliosis; fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy; aspiration pneumonitis. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults; secondary thrombocytopenia in adults; acquired (autoimmune) hemolytic anemia; erythroblastopenia (RBC anemia); congenital (erythroid) hypoplastic anemia. Neoplastic Diseases. For palliative management of: leukemias and lymphomas in adults, acute leukemia of childhood. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in: ulcerative colitis, regional enteritis. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy; trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
<Description>Prednisone tablets, USP contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate, 17,21-dihydroxy-. The structural formula is represented below. C 21H 26O 5 M.W. 358.44. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. Each tablet, for oral administration, contains 5 mg, 10 mg or 20 mg of prednisone, USP (anhydrous). In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, crospovidone, docusate sodium, magnesium stearate and sodium benzoate. Prednisone tablets, USP 20 mg also contain FD&C Yellow No. 6.</Description>
</NDC>
<NDC>
<NDCCode>51655-493-49</NDCCode>
<PackageDescription>42 TABLET in 1 BOTTLE, PLASTIC (51655-493-49) </PackageDescription>
<NDC11Code>51655-0493-49</NDC11Code>
<ProductNDC>51655-493</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA084122</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets and solutions are indicated in the following conditions.</IndicationAndUsage>
<Description>Prednisone is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone, USP is a white to partially white, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. The chemical name for prednisone is 17,21-dihydroxypregna-1,4-dienne-3,11,20-trione. The structural formula is represented below. Each tablet, for oral administration, contains 1, 2.5, 5, 10, 20, or 50 mg of prednisone. PredniSONE Oral Solution contains 5 mg prednisone per 5 mL, and PredniSONE Intensol TMOral Solution (Concentrate) contains 5 mg prednisone per mL. Inactive Ingredients. PredniSONE Tablets, USP contain the following inactive ingredients: lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate and stearic acid (1 mg, 2.5 mg, and 5 mg only). PredniSONE Oral Solution, USP contains alcohol 5% and the following inactive ingredients: anhydrous citric acid, edetate disodium, fructose, hydrochloric acid, maltol, peppermint oil, polysorbate 80, propylene glycol, saccharin sodium, sodium benzoate, vanilla flavor and purified water. PredniSONE IntensolOral Solution (Concentrate) contains alcohol 30% and the following inactive ingredients: anhydrous citric acid, poloxamer 188, propylene glycol and purified water.</Description>
</NDC>
<NDC>
<NDCCode>51655-972-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE, PLASTIC (51655-972-20) </PackageDescription>
<NDC11Code>51655-0972-20</NDC11Code>
<ProductNDC>51655-972</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208412</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets USP are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>51655-972-21</NDCCode>
<PackageDescription>21 TABLET in 1 BOTTLE, PLASTIC (51655-972-21) </PackageDescription>
<NDC11Code>51655-0972-21</NDC11Code>
<ProductNDC>51655-972</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208412</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets USP are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>51655-972-27</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE, PLASTIC (51655-972-27) </PackageDescription>
<NDC11Code>51655-0972-27</NDC11Code>
<ProductNDC>51655-972</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208412</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230228</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets USP are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>51655-972-51</NDCCode>
<PackageDescription>40 TABLET in 1 BOTTLE, PLASTIC (51655-972-51) </PackageDescription>
<NDC11Code>51655-0972-51</NDC11Code>
<ProductNDC>51655-972</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208412</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets USP are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>51655-972-52</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (51655-972-52) </PackageDescription>
<NDC11Code>51655-0972-52</NDC11Code>
<ProductNDC>51655-972</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208412</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220923</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets USP are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>51655-972-53</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE, PLASTIC (51655-972-53) </PackageDescription>
<NDC11Code>51655-0972-53</NDC11Code>
<ProductNDC>51655-972</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208412</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets USP are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>51655-972-54</NDCCode>
<PackageDescription>15 TABLET in 1 BOTTLE, PLASTIC (51655-972-54) </PackageDescription>
<NDC11Code>51655-0972-54</NDC11Code>
<ProductNDC>51655-972</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208412</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone tablets USP are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone, USP.................................................. 10 mg, 20 mg and 50 mg. Inactive Ingredients. The tablets contain lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize starch), sodium starch glycolate and magnesium stearate. Prednisone tablets USP contain prednisone USP, which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>52244-010-02</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (52244-010-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0010-02</NDC11Code>
<ProductNDC>52244-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120415</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>52244-010-06</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (52244-010-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0010-06</NDC11Code>
<ProductNDC>52244-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120415</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>52244-020-02</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (52244-020-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0020-02</NDC11Code>
<ProductNDC>52244-020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120115</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>52244-020-06</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (52244-020-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0020-06</NDC11Code>
<ProductNDC>52244-020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120115</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>52244-040-02</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (52244-040-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0040-02</NDC11Code>
<ProductNDC>52244-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120315</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120315</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>52244-040-06</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (52244-040-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0040-06</NDC11Code>
<ProductNDC>52244-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120315</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120315</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>51655-005-52</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (51655-005-52) </PackageDescription>
<NDC11Code>51655-0005-52</NDC11Code>
<ProductNDC>51655-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phendimetrazine</ProprietaryName>
<NonProprietaryName>Phendimetrazine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091042</ApplicationNumber>
<LabelerName>Northwind Pharmaceuticals</LabelerName>
<SubstanceName>PHENDIMETRAZINE TARTRATE</SubstanceName>
<StrengthNumber>35</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phendimetrazine tartrate is indicated in the management of exogenous obesity as a short term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m2 or higher who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of Body Mass Index (BMI) based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches x 0.0254 = meters. BODY MASS INDEX (BMI), kg/m2 Height (feet, inches) Weight(pounds) 5’0” 5’3” 5’6” 5’9” 6’0” 6’3” 140 27 25 23 21 19 18 150 29 27 24 22 20 19 160 31 28 26 24 22 20 170 33 30 28 25 23 21 180 35 32 29 27 25 23 190 37 34 31 28 26 24 200 39 36 32 30 27 25 210 41 37 34 31 29 26 220 43 39 36 33 30 28 230 45 41 37 34 31 29 240 47 43 39 36 33 30 250 49 44 40 37 34 31 Phendimetrazine tartrate is indicated for use as monotherapy only. Please review the manufacturer's complete drug information available from the FDA at www.fda.gov Permanent Link: https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=07bf3488-09e7-436f-af3f-94c35a7be025.</IndicationAndUsage>
<Description>Phendimetrazine tartrate, as the dextro isomer, has the chemical name of (2S,3S)-3,4-Dimethyl-2-phenylmorpholine L-(+)- tartrate (1:1). The structural formula is available through Permanent Link. C12H17NOC4H6O6 M.W. 341.36. Phendimetrazine tartrate is a white, odorless crystalline powder. It is freely soluble in water; sparingly soluble in warm alcohol, insoluble in chloroform, acetone, ether and benzene. Each white tablet, for oral administration, contains 35 mg of phendimetrazine tartrate. In addition, the following inactive ingredients are present: Colloidal Silicon Dioxide, Lactose Monohydrate, Magnesium Stearate, Microcrystalline Cellulose 102 and Sodium Starch Glycolate. The yellow tablet also contains FD&C Yellow # 5 Aluminum Lake (15-17%). The blue tablet also contains FD&C Blue # 1 Aluminum Lake (11-13%). Please review the manufacturer's complete drug information available from the FDA at www.fda.gov Permanent Link: https://dailymed.nlm.nih.gov/dailymed/drugInfo.cfm?setid=07bf3488-09e7-436f-af3f-94c35a7be025.</Description>
</NDC>
<NDC>
<NDCCode>51655-137-26</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (51655-137-26) </PackageDescription>
<NDC11Code>51655-0137-26</NDC11Code>
<ProductNDC>51655-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221004</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077534</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .</IndicationAndUsage>
<Description>Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets.</Description>
</NDC>
<NDC>
<NDCCode>51655-137-52</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (51655-137-52) </PackageDescription>
<NDC11Code>51655-0137-52</NDC11Code>
<ProductNDC>51655-137</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221004</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077534</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .</IndicationAndUsage>
<Description>Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets.</Description>
</NDC>
<NDC>
<NDCCode>51655-209-26</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (51655-209-26) </PackageDescription>
<NDC11Code>51655-0209-26</NDC11Code>
<ProductNDC>51655-209</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077534</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221021</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .</IndicationAndUsage>
<Description>Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets.</Description>
</NDC>
<NDC>
<NDCCode>51655-209-52</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (51655-209-52) </PackageDescription>
<NDC11Code>51655-0209-52</NDC11Code>
<ProductNDC>51655-209</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221021</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077534</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .</IndicationAndUsage>
<Description>Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets.</Description>
</NDC>
<NDC>
<NDCCode>51655-605-26</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (51655-605-26) </PackageDescription>
<NDC11Code>51655-0605-26</NDC11Code>
<ProductNDC>51655-605</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram Hydrobromide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077031</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .</IndicationAndUsage>
<Description>Citalopram tablets, USP contains citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram tablets, USP are for oral administration and are available as film-coated round and capsule shaped tablets. The strengths reflect citalopram base equivalent content. The 10 mg, 20 mg, and 40 mg strength tablets contain 12.49 mg, 24.98 mg, and 49.96 mg of citalopram hydrobromide, respectively. The 20 mg and 40 mg tablets are scored. Inactive ingredients: copovidone, corn starch, croscarmellose sodium, lactose monohydrate, magnesium stearate, hypromellose, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Iron oxides are used as coloring agents in the peach (10 mg) and light pink (20 mg) tablets.</Description>
</NDC>
<NDC>
<NDCCode>51655-605-52</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (51655-605-52) </PackageDescription>
<NDC11Code>51655-0605-52</NDC11Code>
<ProductNDC>51655-605</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram Hydrobromide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077031</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .</IndicationAndUsage>
<Description>Citalopram tablets, USP contains citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram tablets, USP are for oral administration and are available as film-coated round and capsule shaped tablets. The strengths reflect citalopram base equivalent content. The 10 mg, 20 mg, and 40 mg strength tablets contain 12.49 mg, 24.98 mg, and 49.96 mg of citalopram hydrobromide, respectively. The 20 mg and 40 mg tablets are scored. Inactive ingredients: copovidone, corn starch, croscarmellose sodium, lactose monohydrate, magnesium stearate, hypromellose, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Iron oxides are used as coloring agents in the peach (10 mg) and light pink (20 mg) tablets.</Description>
</NDC>
<NDC>
<NDCCode>51655-680-26</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (51655-680-26) </PackageDescription>
<NDC11Code>51655-0680-26</NDC11Code>
<ProductNDC>51655-680</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram Hydrobromide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220302</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077031</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .</IndicationAndUsage>
<Description>Citalopram tablets, USP contains citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram tablets, USP are for oral administration and are available as film-coated round and capsule shaped tablets. The strengths reflect citalopram base equivalent content. The 10 mg, 20 mg, and 40 mg strength tablets contain 12.49 mg, 24.98 mg, and 49.96 mg of citalopram hydrobromide, respectively. The 20 mg and 40 mg tablets are scored. Inactive ingredients: copovidone, corn starch, croscarmellose sodium, lactose monohydrate, magnesium stearate, hypromellose, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Iron oxides are used as coloring agents in the peach (10 mg) and light pink (20 mg) tablets.</Description>
</NDC>
<NDC>
<NDCCode>51655-680-52</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (51655-680-52) </PackageDescription>
<NDC11Code>51655-0680-52</NDC11Code>
<ProductNDC>51655-680</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram Hydrobromide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220302</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077031</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram tablets are indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)] .</IndicationAndUsage>
<Description>Citalopram tablets, USP contains citalopram, a selective serotonin reuptake inhibitor (SSRI). Citalopram hydrobromide is a racemic bicyclic phthalane structure and is designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile hydrobromide with the following structural formula. The molecular formula is C 20H 22BrFN 2O and its molecular weight is 405.35. Citalopram hydrobromide USP occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram tablets, USP are for oral administration and are available as film-coated round and capsule shaped tablets. The strengths reflect citalopram base equivalent content. The 10 mg, 20 mg, and 40 mg strength tablets contain 12.49 mg, 24.98 mg, and 49.96 mg of citalopram hydrobromide, respectively. The 20 mg and 40 mg tablets are scored. Inactive ingredients: copovidone, corn starch, croscarmellose sodium, lactose monohydrate, magnesium stearate, hypromellose, microcrystalline cellulose, polyethylene glycol, and titanium dioxide. Iron oxides are used as coloring agents in the peach (10 mg) and light pink (20 mg) tablets.</Description>
</NDC>
<NDC>
<NDCCode>51655-938-26</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (51655-938-26) </PackageDescription>
<NDC11Code>51655-0938-26</NDC11Code>
<ProductNDC>51655-938</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077534</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .</IndicationAndUsage>
<Description>Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets.</Description>
</NDC>
<NDC>
<NDCCode>51655-938-52</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (51655-938-52) </PackageDescription>
<NDC11Code>51655-0938-52</NDC11Code>
<ProductNDC>51655-938</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Citalopram</ProprietaryName>
<NonProprietaryName>Citalopram</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077534</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Citalopram is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies ( 14)] .</IndicationAndUsage>
<Description>Citalopram tablet contains citalopram hydrobromide, an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram hydrobromide is a racemic bicyclic phthalane derivative designated ((±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5-carbonitrile, hydrobromide with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram hydrobromide occurs as a fine, white to off-white powder. Citalopram hydrobromide is sparingly soluble in water and soluble in ethanol. Citalopram is available only in tablet dosage form. Citalopram tablets, USP 10 mg are film-coated, round tablets containing citalopram hydrobromide in strengths equivalent to 10 mg citalopram base. Citalopram hydrobromide, USP 20 mg and 40 mg tablets are film-coated, round, scored tablets containing citalopram hydrobromide in strengths equivalent to 20 mg or 40 mg citalopram base. Their strengths reflect their citalopram base equivalent content. The 10 mg, 20 mg and 40 mg strength tablets contain 12.49 mg, 24.98 mg and 49.96 mg of citalopram hydrobromide, respectively. The tablets also contain the following. Inactive ingredients: copovidone, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, opadry beige (HPMC 2910/hypromellose 6cp, titanium dioxide, macrogol/Peg400, iron oxide yellow and iron oxide red), opadry pink (HPMC 2910/hypromellose 6cP, titanium dioxide, macrogol/Peg400 and iron oxide red) and opadry white (titanium dioxide, HPMC 2910/hypromellose 3cp, HPMC 2910/ hypromellose 6cp, Macrogol/Peg400 and Polysorbate 80) are used as coloring agents in the beige (10 mg) and pink (20 mg) and white (40 mg) tablets.</Description>
</NDC>
<NDC>
<NDCCode>10544-972-30</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (10544-972-30)</PackageDescription>
<NDC11Code>10544-0972-30</NDC11Code>
<ProductNDC>10544-972</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091672</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Omeprazole delayed-release capsule USP is a proton pump inhibitor indicated for:. Treatment in adults of duodenal ulcer ( 1.1) and gastric ulcer ( 1.2). Treatment in adults and children of gastroesophageal reflux disease (GERD) ( 1.3) and maintenance of healing of erosive esophagitis ( 1.4). Pathologic Hypersecretory Conditions ( 1.5). The safety and effectiveness of omeprazole in pediatric patients <1 year of age have not been established. ( 8.4).</IndicationAndUsage>
<Description>The active ingredient in omeprazole delayed-release capsules USP is a substituted benzimidazole, 5-methoxy-¬2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1 H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42. The structural formula is:. Omeprazole USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for omeprazole delayed-release capsules USP, 10 mg contains FD&C Red No. 40, FD&C Yellow No. 6, D&C Yellow No.10, gelatin, FD&C Blue No.1, FD&C Red No. 3, sodium lauryl sulfate and titanium dioxide. The capsule shell for omeprazole delayed-release capsules USP, 20 mg contains FD&C Blue No.1, FD&C Red No.3, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for omeprazole delayed-release capsules USP, 40 mg contains FD&C Red No. 40, FD&C Yellow No. 6, D&C Yellow No.10, gelatin, FD&C Blue No.1, FD&C Red No. 3, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>10812-972-01</NDCCode>
<PackageDescription>1 CARTRIDGE in 1 BLISTER PACK (10812-972-01) > 13 g in 1 CARTRIDGE</PackageDescription>
<NDC11Code>10812-0972-01</NDC11Code>
<ProductNDC>10812-972</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Neutrogena Wet Skin Kids Beach And Pool Sunblock</ProprietaryName>
<ProprietaryNameSuffix>Spf 70</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene, And Oxybenzone</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20111205</StartMarketingDate>
<EndMarketingDate>20160901</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Neutrogena Corporation</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>30; 150; 50; 100; 30</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
</NDCList>