RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>51662-1422-3</NDCCode>
    <PackageDescription>25 POUCH in 1 CASE (51662-1422-3)  / 1 VIAL, SINGLE-DOSE in 1 POUCH (51662-1422-2)  / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>51662-1422-03</NDC11Code>
    <ProductNDC>51662-1422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hci</ProprietaryName>
    <NonProprietaryName>Lidocaine Hci</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL</RouteName>
    <StartMarketingDate>20191210</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA084625</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230119</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine HCl Injections are indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
    <Description>Lidocaine Hydrochloride Injections are sterile, nonpyrogenic, aqueous, isotonic solutions that contain a local anesthetic agent and are administered parenterally by injection. See INDICATIONS &amp; USAGE for specific uses. Each mL of the 1% solution contains lidocaine hydrochloride 10 mg and sodium chloride 7 mg. Each mL of the 2% solution contains lidocaine hydrochloride 20 mg and sodium chloride 6 mg. The pH of these solutions is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid. Lidocaine Hydrochloride Injection solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C14H22N2O  HCl) has the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1422-1</NDCCode>
    <PackageDescription>5 mL in 1 VIAL, SINGLE-DOSE (51662-1422-1) </PackageDescription>
    <NDC11Code>51662-1422-01</NDC11Code>
    <ProductNDC>51662-1422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hci</ProprietaryName>
    <NonProprietaryName>Lidocaine Hci</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL</RouteName>
    <StartMarketingDate>20191210</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA084625</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191210</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine HCl Injections are indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
    <Description>Lidocaine Hydrochloride Injections are sterile, nonpyrogenic, aqueous, isotonic solutions that contain a local anesthetic agent and are administered parenterally by injection. See INDICATIONS &amp; USAGE for specific uses. Each mL of the 1% solution contains lidocaine hydrochloride 10 mg and sodium chloride 7 mg. Each mL of the 2% solution contains lidocaine hydrochloride 20 mg and sodium chloride 6 mg. The pH of these solutions is adjusted to approximately 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid. Lidocaine Hydrochloride Injection solutions contain lidocaine hydrochloride which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C14H22N2O  HCl) has the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>36987-1422-3</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1422-3)</PackageDescription>
    <NDC11Code>36987-1422-03</NDC11Code>
    <ProductNDC>36987-1422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cabbage</ProprietaryName>
    <NonProprietaryName>Cabbage</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Nelco Laboratories, Inc.</LabelerName>
    <SubstanceName>CABBAGE</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Vegetable Proteins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
    <Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
  </NDC>
  <NDC>
    <NDCCode>37662-1422-3</NDCCode>
    <PackageDescription>1200 PELLET in 1 BOTTLE, GLASS (37662-1422-3) </PackageDescription>
    <NDC11Code>37662-1422-03</NDC11Code>
    <ProductNDC>37662-1422</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Ranunculus Bulbosus</ProprietaryName>
    <NonProprietaryName>Ranunculus Bulbosus</NonProprietaryName>
    <DosageFormName>PELLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220824</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Hahnemann Laboratories, INC.</LabelerName>
    <SubstanceName>RANUNCULUS BULBOSUS</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[hp_C]/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2022-08-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220824</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>38779-1422-3</NDCCode>
    <PackageDescription>5 g in 1 BOTTLE, GLASS (38779-1422-3) </PackageDescription>
    <NDC11Code>38779-1422-03</NDC11Code>
    <ProductNDC>38779-1422</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Medroxyprogesterone Acetate</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20140707</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>Medisca Inc.</LabelerName>
    <SubstanceName>MEDROXYPROGESTERONE ACETATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>08-SEP-16</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>53002-1422-3</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CONTAINER (53002-1422-3)  &gt; 30 TABLET in 1 BOTTLE</PackageDescription>
    <NDC11Code>53002-1422-03</NDC11Code>
    <ProductNDC>53002-1422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metformin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100422</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090564</ApplicationNumber>
    <LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>850</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Biguanide [EPC],Biguanides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Metformin hydrochloride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults and children with type 2 diabetes mellitus.</IndicationAndUsage>
    <Description>Metformin Hydrochloride Tablets USP are oral antihyperglycemic drugs used in the management of type 2 diabetes. Metformin hydrochloride ( N,N -dimethylimidodicarbonimidic diamide hydrochloride) is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. The structural formula is as shown:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C4H11N5  HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pKa of Metformin is 12.4. The pH of a 1% aqueous solution of Metformin hydrochloride is 6.68. Metformin hydrochloride tablets , USP contains 500 mg, 850 mg, or 1000 mg of Metformin hydrochloride. Each tablet contains the inactive ingredients povidone (K-30), povidone (K-90), pregelatinized starch, and magnesium stearate. In addition, the coating for the tablets contains artificial blackberry flavor, hypromellose, macrogol and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>62991-1422-3</NDCCode>
    <PackageDescription>25 g in 1 JAR (62991-1422-3) </PackageDescription>
    <NDC11Code>62991-1422-03</NDC11Code>
    <ProductNDC>62991-1422</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Clonidine Hydrochloride</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20101025</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
    <LabelerName>LETCO MEDICAL, LLC</LabelerName>
    <SubstanceName>CLONIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2026-04-09</LastUpdate>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>25-OCT-10</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>63629-1422-3</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (63629-1422-3)</PackageDescription>
    <NDC11Code>63629-1422-03</NDC11Code>
    <ProductNDC>63629-1422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Isoniazid</ProprietaryName>
    <NonProprietaryName>Isoniazid</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19810714</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA087425</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>ISONIAZID</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Antimycobacterial [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-04-30</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>67046-1422-3</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BLISTER PACK (67046-1422-3) </PackageDescription>
    <NDC11Code>67046-1422-03</NDC11Code>
    <ProductNDC>67046-1422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20241111</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078428</ApplicationNumber>
    <LabelerName>Coupler LLC</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241111</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gabapentin capsules are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
    <Description>The active ingredient in gabapentin capsule, USP is gabapentin, USP, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2and the molecular weight is 171.24 g/mol. The structural formula of gabapentin is:. Gabapentin, USP is a white to off-white crystalline solid with a pK a1of 3.7 and a pK a2of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin capsule, USP contains 100 mg, 300 mg, or 400 mg of gabapentin, USP and the following inactive ingredients: magnesium stearate, pregelatinized starch (corn), starch (corn) and talc. The 100 mg capsule shell contains gelatin, sodium lauryl sulfate and titanium dioxide. The 300 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, and iron oxide yellow. The 400 mg capsule shell contains gelatin, sodium lauryl sulfate, titanium dioxide, FD&amp;C Yellow No.6 and FD&amp;C Blue No.1.</Description>
  </NDC>
  <NDC>
    <NDCCode>67296-1422-3</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (67296-1422-3) </PackageDescription>
    <NDC11Code>67296-1422-03</NDC11Code>
    <ProductNDC>67296-1422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atorvastatin Calcium</ProprietaryName>
    <NonProprietaryName>Atorvastatin Calcium</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076477</ApplicationNumber>
    <LabelerName>RedPharm Drug, Inc.</LabelerName>
    <SubstanceName>ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is recommended as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with CHD or multiple risk factors for CHD, atorvastatin calcium tablets can be started simultaneously with diet.</IndicationAndUsage>
    <Description>Atorvastatin calcium trihydrate, USP is a synthetic lipid-lowering agent. Atorvastatin is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, an early and rate-limiting step in cholesterol biosynthesis. Atorvastatin calcium trihydrate, USP is [R-(R *,R *)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl-4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. The molecular formula of atorvastatin calcium trihydrate, USP is (C 33H 34FN 2O 5) 2Ca3H 2O and its molecular weight is 1209.41. Its structural formula is:. Atorvastatin calcium tablets, USP for oral administration contain atorvastatin calcium trihydrate, USP equivalent to 10, 20, 40, or 80 mg atorvastatin and the following inactive ingredients: calcium carbonate; croscarmellose sodium; hydroxypropyl cellulose; hypromellose; lactose monohydrate; magnesium stearate; microcrystalline cellulose; polyethylene glycol; polysorbate 80; simethicone emulsion; talc, and titanium dioxide. Meets USP dissolution test 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>71335-1422-3</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (71335-1422-3) </PackageDescription>
    <NDC11Code>71335-1422-03</NDC11Code>
    <ProductNDC>71335-1422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140908</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091490</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200306</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxycodone Hydrochloride Tablets, USP are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
    <Description>Oxycodone Hydrochloride Tablets, USP contain oxycodone, an opioid agonist. Each tablet for oral administration contains 5 mg, 10 mg, 15 mg, 20 mg, or 30 mg of oxycodone hydrochloride, USP. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. Oxycodone hydrochloride dissolves in water (1 g in 6 to 7 mL) and is considered slightly soluble in alcohol (octanol water partition coefficient is 0.7). Chemically, oxycodone hydrochloride is 4, 5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride and has the following structural formula.       C18H21NO4∙HCl                                                            MW 351.82. The Oxycodone Hydrochloride Tablets, USP contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, crospovidone, and magnesium stearate. The 5 mg, 10 mg, 15 mg, 20 mg, and 30 mg tablets contain the equivalent of 4.5 mg, 9 mg, 13.5 mg, 18 mg, and 27 mg, respectively, of oxycodone free base.</Description>
  </NDC>
  <NDC>
    <NDCCode>0228-1422-03</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0228-1422-03) </PackageDescription>
    <NDC11Code>00228-1422-03</NDC11Code>
    <ProductNDC>0228-1422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lamotrigine</ProprietaryName>
    <NonProprietaryName>Lamotrigine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160401</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200672</ApplicationNumber>
    <LabelerName>Actavis Pharma, Inc.</LabelerName>
    <SubstanceName>LAMOTRIGINE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lamotrigine extended-release tablets are indicated for: 1 adjunctive therapy for primary generalized tonic-clonic seizures (PGTC) and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. (1.1), 2 conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single antiepileptic drug (AED). (1.2).</IndicationAndUsage>
    <Description>Lamotrigine extended-release tablets, USP an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine’s chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine, USP is a white to pale cream-colored powder and has a pKa of 5.7. Lamotrigine, USP is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is. Lamotrigine extended-release tablets, USP are supplied for oral administration as 100 mg (gray, round), 200 mg (white to off-white, round), 250 mg (yellow, capsule-shaped), and 300 mg (gray, capsule-shaped) tablets. Each tablet contains the labeled amount of lamotrigine, USP and the following inactive ingredients: hypromellose, lactose monohydrate; magnesium stearate; methacrylic acid copolymer, silicon dioxide, talc, titanium dioxide, and triethyl citrate. In addition, the 100 mg and 300 mg tablets also contain FD&amp;C Blue #2 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, FD&amp;C Yellow #6 Aluminum Lake (Sunset Yellow Lake) and triacetin. The 200 mg tablets also contain polyethylene glycol 400. The 250 mg tablets also contain black iron oxide, medium chain triglycerides, copovidone, polydextrose, polyethylene glycol 3350, red iron oxide, and yellow iron oxide. Lamotrigine extended-release tablets, USP contain a modified-release formulation as the core. The tablets are coated with an enteric coat, dry coat and color coat, to enable a controlled release of drug in the acidic environment of the stomach. The combination of this and the modified-release core are designed to control the dissolution rate of lamotrigine over a period of time. Meets USP Dissolution Test 7.</Description>
  </NDC>
  <NDC>
    <NDCCode>43742-1422-1</NDCCode>
    <PackageDescription>30 mL in 1 BOTTLE, DROPPER (43742-1422-1) </PackageDescription>
    <NDC11Code>43742-1422-01</NDC11Code>
    <ProductNDC>43742-1422</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Influenza Plus</ProprietaryName>
    <NonProprietaryName>Eucalyptus Globulus, Ipecacuanha, Aconitum Napellus, Influenzinum, Respiratory Syncytial Virus Nosode (rsv), Bryonia (alba), Eupatorium Perfoliatum, Gelsemium Sempervirens, Kreosotum, Veratrum Viride</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190116</StartMarketingDate>
    <EndMarketingDate>20250617</EndMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Deseret Biologicals, Inc.</LabelerName>
    <SubstanceName>ACONITUM NAPELLUS; BRYONIA ALBA ROOT; EUCALYPTUS GLOBULUS LEAF; EUPATORIUM PERFOLIATUM FLOWERING TOP; GELSEMIUM SEMPERVIRENS ROOT; INFLUENZA A VIRUS A/SINGAPORE/GP1908/2015 IVR-180 (H1N1) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/SINGAPORE/INFIMH-16-0019/2016 NIB-104 (H3N2) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/MARYLAND/15/2016 ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/PHUKET/3073/2013 ANTIGEN (FORMALDEHYDE INACTIVATED); IPECAC; RESPIRATORY SYNCYTIAL VIRUS IMMUNE GLOBULIN INTRAVENOUS (HUMAN); VERATRUM VIRIDE ROOT; WOOD CREOSOTE</SubstanceName>
    <StrengthNumber>6; 30; 2; 30; 30; 8; 8; 8; 8; 3; 9; 30; 30</StrengthNumber>
    <StrengthUnit>[hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20190116</StartMarketingDatePackage>
    <EndMarketingDatePackage>20250617</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the temporary relief of symptoms that may be caused by viruses such as influenza or RSV infection including high fever, chills, headache,fatigue, cough, sore throat, runny and/or stuffy nose, congestion, body aches, vomiting, and occasional diarrhea.**. **These statements are based upon traditional homeopathic practice. They have not been reviewed by the Food and Drug Administration.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>50090-1422-0</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (50090-1422-0) </PackageDescription>
    <NDC11Code>50090-1422-00</NDC11Code>
    <ProductNDC>50090-1422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130321</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202519</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
    <StrengthNumber>12.5; 320</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20141128</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality have also been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy Valsartan and hydrochlorothiazide tablets may be substituted for the titrated components. Initial Therapy Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320 mg/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of &lt; 140 mmHg (systolic) and 60% likelihood of achieving &lt; 90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on hydrochlorothiazide alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rise to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
    <Description>Valsartan and hydrochlorothiazide is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1΄-biphenyl]-4-yl]methyl]-L-Valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan USP is a white, fine hygroscopic powder. It is soluble in ethanol and methanol and practically insoluble in water. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its molecular formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is:Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, talc, and titanium dioxide. In addition, the 80 mg/12.5 mg and 160 mg/12.5 mg contains iron oxide red and iron oxide yellow, the 160 mg/25 mg contains iron oxide black, iron oxide red, and iron oxide yellow, 320 mg/12.5 mg contains iron oxide black and iron oxide red, and the 320 mg/25 mg contains iron oxide yellow.</Description>
  </NDC>
  <NDC>
    <NDCCode>55154-1422-0</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 BAG (55154-1422-0)  / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>55154-1422-00</NDC11Code>
    <ProductNDC>55154-1422</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xarelto</ProprietaryName>
    <NonProprietaryName>Rivaroxaban</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110701</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022406</ApplicationNumber>
    <LabelerName>Cardinal Health 107, LLC</LabelerName>
    <SubstanceName>RIVAROXABAN</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>XARELTO is a factor Xa inhibitor indicated: 1 to reduce risk of stroke and systemic embolism in nonvalvular atrial fibrillation (1.1), 2 for treatment of deep vein thrombosis (DVT) (1.2), 3 for treatment of pulmonary embolism (PE) (1.3), 4 for reduction in the risk of recurrence of DVT or PE (1.4), 5 for the prophylaxis of DVT, which may lead to PE in patients undergoing knee or hip replacement surgery (1.5), 6 for prophylaxis of venous thromboembolism (VTE) in acutely ill medical patients (1.6), 7 to reduce the risk of major cardiovascular events in patients with coronary artery disease (CAD) (1.7), 8 to reduce the risk of major thrombotic vascular events in patients with peripheral artery disease (PAD), including patients after recent lower extremity revascularization due to symptomatic PAD (1.8), 9 for treatment of VTE and reduction in the risk of recurrent VTE in pediatric patients from birth to less than 18 years (1.9), 10 for thromboprophylaxis in pediatric patients 2 years and older with congenital heart disease after the Fontan procedure (1.10).</IndicationAndUsage>
    <Description>Rivaroxaban, a factor Xa (FXa) inhibitor, is the active ingredient in XARELTO ®Tablets and XARELTO ®for oral suspension with the chemical name 5-Chloro-N-({(5S)-2-oxo-3-[4-(3-oxo-4-morpholinyl)phenyl]-1,3-oxazolidin-5-yl}methyl)-2-thiophenecarboxamide. The molecular formula of rivaroxaban is C 19H 18ClN 3O 5S and the molecular weight is 435.89. The structural formula is:. Rivaroxaban is a pure (S)-enantiomer. It is an odorless, non-hygroscopic, white to yellowish powder. Rivaroxaban is only slightly soluble in organic solvents (e.g., acetone, polyethylene glycol 400) and is practically insoluble in water and aqueous media. Each XARELTO tablet contains 2.5 mg, 10 mg, 15 mg, or 20 mg of rivaroxaban. The inactive ingredients of XARELTO are: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. Additionally, the proprietary film coating mixture used for XARELTO 2.5 mg is Opadry® Light Yellow, containing ferric oxide yellow, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 10 mg tablets is Opadry® Pink and for XARELTO 15 mg tablets is Opadry® Red, both containing ferric oxide red, hypromellose, polyethylene glycol 3350, and titanium dioxide, and for XARELTO 20 mg tablets is Opadry® II Dark Red, containing ferric oxide red, polyethylene glycol 3350, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. XARELTO for oral suspension is supplied as granules in bottles containing 155 mg of rivaroxaban (1 mg of rivaroxaban per mL after reconstitution). The inactive ingredients are: anhydrous citric acid, hypromellose, mannitol, microcrystalline cellulose and carboxymethylcellulose sodium, sodium benzoate, sucralose, sweet and creamy flavor and xanthan gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1201-3</NDCCode>
    <PackageDescription>20 POUCH in 1 CASE (51662-1201-3)  &gt; 1 mL in 1 POUCH (51662-1201-2) </PackageDescription>
    <NDC11Code>51662-1201-03</NDC11Code>
    <ProductNDC>51662-1201</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Adenosine Injection, 6mg/2ml (3mg/ml) Vial</ProprietaryName>
    <NonProprietaryName>Adenosine Injection, 6mg/2ml (3mg/ml) Vial</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180714</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078076</ApplicationNumber>
    <LabelerName>HF Acquisition Co. LLC, DBA Health First</LabelerName>
    <SubstanceName>ADENOSINE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-10-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>51662-1204-3</NDCCode>
    <PackageDescription>25 POUCH in 1 CASE (51662-1204-3)  / 1 mL in 1 POUCH (51662-1204-2) </PackageDescription>
    <NDC11Code>51662-1204-03</NDC11Code>
    <ProductNDC>51662-1204</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Aminophylline</ProprietaryName>
    <NonProprietaryName>Aminophylline</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180913</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA087242</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>AMINOPHYLLINE DIHYDRATE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous theophylline is indicated as an adjunct to inhaled beta-2 selective agonists and systemically administered corticosteroids for the treatment of acute exacerbations of the symptoms and reversible airflow obstruction associated with asthma and other chronic lung diseases, e.g., emphysema and chronic bronchitis.</IndicationAndUsage>
    <Description>Aminophylline Injection, USP is a sterile, nonpyrogenic solution of aminophylline in water for injection. Aminophylline (dihydrate) is approximately 79% of anhydrous theophylline by weight. Aminophylline Injection is administered by slow intravenous injection or diluted and administered by intravenous infusion. The solution contains no bacteriostat or antimicrobial agent and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Aminophylline is a 2:1 complex of theophylline and ethylenediamine. Theophylline is structurally classified as a methylxanthine. Aminophylline occurs as a white or slightly yellowish granule or powder, with a slight ammoniacal odor. Aminophylline has the chemical name 1H-Purine-2, 6-dione, 3,7-dihydro-1,3-dimethyl-, compound with 1,2-ethanediamine (2:1). The structural formula of aminophylline (dihydrate) is as follows. The molecular formula of aminophylline dihydrate is C16H24N10O4  2(H2O) with a molecular weight of 456.46. Aminophylline Injection, USP contains aminophylline (calculated as the dihydrate) 25 mg/mL (equivalent to 19.7 mg/mL anhydrous theophylline) prepared with the aid of ethylenediamine. The solution may contain an excess of ethylenediamine for pH adjustment. pH is 8.8 (8.6 to 9.0). The osmolar concentration is 0.17 mOsmol/mL (calc.).</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1205-1</NDCCode>
    <PackageDescription>3 mL in 1 VIAL, SINGLE-DOSE (51662-1205-1) </PackageDescription>
    <NDC11Code>51662-1205-01</NDC11Code>
    <ProductNDC>51662-1205</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180919</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077234</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180919</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amiodarone Hydrochloride Injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone Hydrochloride Injection also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with Amiodarone Hydrochloride Injection, patients may be transferred to oral amiodarone therapy [see Dosage and Administration ( 2)]. Use Amiodarone Hydrochloride Injection for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but Amiodarone Hydrochloride Injection may be safely administered for longer periods if necessary.</IndicationAndUsage>
    <Description>Amiodarone Hydrochloride Injection contains Amiodarone Hydrochloride (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone Hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone Hydrochloride has the following structural formula. Amiodarone Hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration (2)].</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1205-3</NDCCode>
    <PackageDescription>25 POUCH in 1 CASE (51662-1205-3)  / 1 mL in 1 POUCH (51662-1205-2) </PackageDescription>
    <NDC11Code>51662-1205-03</NDC11Code>
    <ProductNDC>51662-1205</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
    <NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180919</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077234</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amiodarone Hydrochloride Injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone Hydrochloride Injection also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with Amiodarone Hydrochloride Injection, patients may be transferred to oral amiodarone therapy [see Dosage and Administration ( 2)]. Use Amiodarone Hydrochloride Injection for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but Amiodarone Hydrochloride Injection may be safely administered for longer periods if necessary.</IndicationAndUsage>
    <Description>Amiodarone Hydrochloride Injection contains Amiodarone Hydrochloride (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone Hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone Hydrochloride has the following structural formula. Amiodarone Hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration (2)].</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1207-3</NDCCode>
    <PackageDescription>10 POUCH in 1 CASE (51662-1207-3)  / 1 CARTON in 1 POUCH (51662-1207-2)  / 1 SYRINGE, GLASS in 1 CARTON / 10 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51662-1207-03</NDC11Code>
    <ProductNDC>51662-1207</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atropine Sulfate</ProprietaryName>
    <NonProprietaryName>Atropine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180822</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>HF Acquisition Co. LLC, DBA Health First</LabelerName>
    <SubstanceName>ATROPINE SULFATE</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-03-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atropine Sulfate Injection, USP, is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.</IndicationAndUsage>
    <Description>Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.1 mg of atropine sulfate monohydrate equivalent to 0.083 mg of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment 0.308 mOsmol/mL (calc.). pH 3.0 to 6.5. Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na+) and chloride (Cl-) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C17H23NO3)2 ∙ H2SO4 ∙ H2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1208-3</NDCCode>
    <PackageDescription>10 POUCH in 1 CASE (51662-1208-3)  / 1 CARTON in 1 POUCH (51662-1208-2)  / 1 SYRINGE, GLASS in 1 CARTON / 5 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51662-1208-03</NDC11Code>
    <ProductNDC>51662-1208</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atropine Sulfate</ProprietaryName>
    <NonProprietaryName>Atropine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180820</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>HF Acquisition Co., LLC, DBA Health First</LabelerName>
    <SubstanceName>ATROPINE SULFATE</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221110</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atropine Sulfate Injection, USP, is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.</IndicationAndUsage>
    <Description>Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.1 mg of atropine sulfate monohydrate equivalent to 0.083 mg of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment 0.308 mOsmol/mL (calc.). pH 3.0 to 6.5. Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na+) and chloride (Cl-) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C17H23NO3)2 ∙ H2SO4 ∙ H2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1209-3</NDCCode>
    <PackageDescription>10 POUCH in 1 CASE (51662-1209-3)  / 1 CARTON in 1 POUCH (51662-1209-2)  / 1 SYRINGE, GLASS in 1 CARTON / 10 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51662-1209-03</NDC11Code>
    <ProductNDC>51662-1209</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Calcium Chloride</ProprietaryName>
    <NonProprietaryName>Calcium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS; INTRAVENTRICULAR</RouteName>
    <StartMarketingDate>20180913</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>CALCIUM CHLORIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221212</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>10% Calcium Chloride Injection, USP is indicated (1) for the treatment of hypocalcemia in those conditions requiring a prompt increase in blood plasma calcium levels, (2) in the treatment of magnesium intoxication due to overdosage of magnesium sulfate and (3) to combat the deleterious effects of hyperkalemia as measured by electrocardiographic (ECG), pending correction of the increased potassium level in the extracellular fluid. 10% Calcium Chloride Injection, USP also may be used in cardiac resuscitation when weak or inadequate contractions return following defibrillation or when epinephrine injection has failed to strengthen myocardial contractions.</IndicationAndUsage>
    <Description>10% Calcium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution containing 100 mg (1.4 mEq/mL) of calcium chloride, dihydrate (1.4 mEq each of Ca++ and Cl¯) in water for injection. It is provided in a 10 mL Unit of Use Syringe to facilitate prompt intravenous injection. The solution is administered only by intravenous or intraventricular cavity injection as a calcium replenisher. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. As per USP testing, when diluted with water for injection to make a 5% solution, the pH of calcium chloride injection is 6.3 (5.5 to 7.5). May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. The osmolar concentration is 2.04 mOsmol/mL (calc.). 10% Calcium Chloride Injection, USP is oxygen sensitive. Calcium Chloride, USP dihydrate is chemically designated CaCl2 · 2H2O (dihydrate) white, odorless fragments or granules freely soluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1217-3</NDCCode>
    <PackageDescription>25 POUCH in 1 CASE (51662-1217-3)  / 1 mL in 1 POUCH (51662-1217-2) </PackageDescription>
    <NDC11Code>51662-1217-03</NDC11Code>
    <ProductNDC>51662-1217</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Digoxin</ProprietaryName>
    <NonProprietaryName>Digoxin</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180913</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA083391</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>DIGOXIN</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Cardiac Glycoside [EPC], Cardiac Glycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210112</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>1.1 Heart Failure in Adults. Digoxin is indicated for the treatment of mild to moderate heart failure in adults. Digoxin increases left ventricular ejection fraction and improves heart failure symptoms, as evidenced by improved exercise capacity and decreased heart failure-related hospitalizations and emergency care, while having no effect on mortality. Where possible, digoxin should be used in combination with a diuretic and an angiotensin-converting enzyme (ACE) inhibitor. 1.2 Atrial Fibrillation in Adults. Digoxin is indicated for the control of ventricular response rate in adult patients with chronic atrial fibrillation.</IndicationAndUsage>
    <Description>Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of two portions: a sugar and a cardenolide (hence “glycosides”). Digoxin has the chemical name: 3β-[(O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-O-2,6-dideoxy-β-D-ribo-hexopy­ranosyl-(1→4)-2,6-dideoxy-β-D-ribo-hexopyranosyl)oxy]-12β,14-dihydroxy-5β-card-20(22)-enolide, and the following structural formula. C41H64O14 MW 780.94. Digoxin exists as odorless white crystals that melt with decomposition above 230°C. The drug is practically insoluble in water and in ether; slightly soluble in diluted (50%) alcohol and in chloroform; and freely soluble in pyridine. Digoxin Injection is a sterile solution for slow intravenous or deep intramuscular injection. Each mL contains digoxin 250 mcg (0.25 mg), alcohol 0.1 mL, propylene glycol 0.4 mL, dibasic sodium phosphate, anhydrous 3 mg and citric acid, anhydrous 0.8 mg in Water for Injection. pH 6.7-7.3; citric acid and/or sodium phosphate added, if necessary, for pH adjustment. Dilution is not required.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1219-3</NDCCode>
    <PackageDescription>25 POUCH in 1 CASE (51662-1219-3)  / 1 mL in 1 POUCH (51662-1219-2) </PackageDescription>
    <NDC11Code>51662-1219-03</NDC11Code>
    <ProductNDC>51662-1219</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diphenhydramine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Diphenhydramine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180816</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA080817</ApplicationNumber>
    <LabelerName>HF Acquisition Co. LLC, DBA Health First</LabelerName>
    <SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Diphenhydramine Hydrochloride Injection is effective in adults and pediatric patients, other than premature infants and neonates, for the following conditions when the oral form is impractical. Antihistaminic. For amelioration of allergic reactions to blood or plasma, in anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled and for other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated. Motion Sickness. For active treatment of motion sickness. Antiparkinsonism. For use in parkinsonism, when oral therapy is impossible or contraindicated, as follows: parkinsonism in the elderly who are unable to tolerate more potent agents, mild cases of parkinsonism in other age groups and in other cases of parkinsonism in combination with centrally acting anticholinergic agents.</IndicationAndUsage>
    <Description>Diphenhydramine Hydrochloride Injection is a sterile, nonpyrogenic solution for intravenous or deep intramuscular use as an antihistaminic agent. Each mL contains diphenhydramine hydrochloride 50 mg and benzethonium chloride 100 mcg in Water for Injection. pH 4.0-6.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The chemical name of diphenhydramine hydrochloride is 2-(Diphenylmethoxy)-N,N-dimethylethylamine hydrochloride. The structural formula is as follows. C17H21NO  HCl MW 291.82. Diphenhydramine hydrochloride occurs as a white crystalline powder and is freely soluble in water and alcohol.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1220-3</NDCCode>
    <PackageDescription>25 POUCH in 1 CASE (51662-1220-3)  / 1 VIAL, SINGLE-DOSE in 1 POUCH (51662-1220-2)  / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>51662-1220-03</NDC11Code>
    <ProductNDC>51662-1220</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dopamine Hci</ProprietaryName>
    <NonProprietaryName>Dopamine Hci</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180823</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018132</ApplicationNumber>
    <LabelerName>HF Acquisition Co. LLC, DBA Health First</LabelerName>
    <SubstanceName>DOPAMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221110</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dopamine HCl is indicated for the correction of hemodynamic imbalances present in the shock syndrome due to myocardial infarction, trauma, endotoxic septicemia, open-heart surgery, renal failure, and chronic cardiac decompensation as in congestive failure. Patients most likely to respond adequately to dopamine HCl are those in whom physiological parameters, such as urine flow, myocardial function, and blood pressure, have not undergone profound deterioration. Multiclinic trials indicate that the shorter the time interval between onset of signs and symptoms and initiation of therapy with blood volume correction and dopamine HCl, the better the prognosis. Where appropriate, blood volume restoration with a suitable plasma expander or whole blood should be accomplished prior to administration of dopamine HCl. Poor Perfusion of Vital Organs – Urine flow appears to be one of the better diagnostic signs by which adequacy of vital organ perfusion can be monitored. Nevertheless, the physician should also observe the patient for signs of reversal of confusion or reversal of comatose condition. Loss of pallor, increase in toe temperature, and/or adequacy of nail bed capillary filling may also be used as indices of adequate dosage. Clinical studies have shown that when dopamine HCl is administered before urine flow has diminished to levels of approximately 0.3 mL/minute, prognosis is more favorable. Nevertheless, in a number of oliguric or anuric patients, administration of dopamine HCl has resulted in an increase in urine flow, which in some cases reached normal levels. Dopamine HCl may also increase urine flow in patients whose output is within normal limits and thus may be of value in reducing the degree of pre-existing fluid accumulation. It should be noted that at doses above those optimal for the individual patient, urine flow may decrease, necessitating reduction of dosage. Low Cardiac Output – Increased cardiac output is related to dopamine's direct inotropic effect on the myocardium. Increased cardiac output at low or moderate doses appears to be related to a favorable prognosis. Increase in cardiac output has been associated with either static or decreased systemic vascular resistance (SVR). Static or decreased SVR associated with low or moderate movements in cardiac output is believed to be a reflection of differential effects on specific vascular beds with increased resistance in peripheral beds (e.g., femoral) and concomitant decreases in mesenteric and renal vascular beds. Redistribution of blood flow parallels these changes so that an increase in cardiac output is accompanied by an increase in mesenteric and renal blood flow. In many instances the renal fraction of the total cardiac output has been found to increase. Increase in cardiac output produced by dopamine is not associated with substantial decreases in systemic vascular resistance as may occur with isoproterenol. Hypotension – Hypotension due to inadequate cardiac output can be managed by administration of low to moderate doses of dopamine HCl which have little effect on SVR. At high therapeutic doses, dopamine's alpha-adrenergic activity becomes more prominent and thus may correct hypotension due to diminished SVR. As in the case of other circulatory decompensation states, prognosis is better in patients whose blood pressure and urine flow have not undergone profound deterioration. Therefore, it is suggested that the physician administer dopamine HCl as soon as a definite trend toward decreased systolic and diastolic pressure becomes evident.</IndicationAndUsage>
    <Description>Dopamine, a sympathomimetic amine vasopressor, is the naturally occurring immediate precursor of norepinephrine. Dopamine hydrochloride is a white to off-white crystalline powder, which may have a slight odor of hydrochloric acid. It is freely soluble in water and soluble in alcohol. Dopamine HCl is sensitive to alkalies, iron salts, and oxidizing agents. Chemically it is designated as 4-(2-aminoethyl) pyrocatechol hydrochloride, and its molecular formula is C8H11NO2  HCl. The structural formula is. and the molecular weight is 189.64. Dopamine hydrochloride injection is a clear, practically colorless, sterile, pyrogen-free, aqueous solution of dopamine HCl for intravenous infusion after dilution. Each milliliter of the 40 mg/mL preparation contains 40 mg of dopamine hydrochloride (equivalent to 32.31 mg of dopamine base). Each milliliter of the 80 mg/mL preparation contains 80 mg of dopamine hydrochloride (equivalent to 64.62 mg of dopamine base). Each milliliter of both preparations contains the following: Sodium metabisulfite 9 mg added as an antioxidant; citric acid, anhydrous 10 mg; and sodium citrate, dihydrate 5 mg added as a buffer. May contain additional citric acid and/or sodium citrate for pH adjustment. pH is 3.3 (2.5 to 5.0). Dopamine must be diluted in an appropriate sterile parenteral solution before intravenous administration. ( See Dosage and Administration).</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1221-3</NDCCode>
    <PackageDescription>50 POUCH in 1 CASE (51662-1221-3)  &gt; 1 mL in 1 POUCH (51662-1221-2) </PackageDescription>
    <NDC11Code>51662-1221-03</NDC11Code>
    <ProductNDC>51662-1221</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Epinephrine</ProprietaryName>
    <NonProprietaryName>Epinephrine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>ENDOTRACHEAL; INTRACARDIAC; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180917</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>EPINEPHRINE</SubstanceName>
    <StrengthNumber>.1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-07-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210112</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Epinephrine Injection, USP is indicated for intravenous injection in (1) treatment of acute hypersensitivity (anaphylactoid reactions to drugs, animal serums and other allergens), (2) treatment of acute asthmatic attacks to relieve bronchospasm not controlled by inhalation or subcutaneous administration of other solutions of the drug and (3) treatment and prophylaxis of cardiac arrest and attacks of transitory atrioventricular (A-V) heart block with syncopal seizures (Stokes-Adams Syndrome). In acute attacks of ventricular standstill, physical measures should be applied first. When external cardiac compression and attempts to restore the circulation by electrical defibrillation or use of a pacemaker fail, intracardiac puncture and intramyocardial injection of epinephrine may be effective.</IndicationAndUsage>
    <Description>Epinephrine Injection, USP is a sterile, nonpyrogenic solution administered parenterally by the intravenous or intracardiac (left ventricular chamber) routes, or via endotracheal tube into the bronchial tree. Each milliliter (mL) contains epinephrine 0.1 mg; sodium chloride 8.16 mg; sodium metabisulfite added 0.46 mg; citric acid, anhydrous 2 mg and sodium citrate, dihydrate 0.6 mg added as buffers. May contain additional citric acid and/or sodium citrate for pH adjustment. pH 3.3 (2.2 to 5.0). Epinephrine Injection, USP is oxygen sensitive. The solution contains no bacteriostat or antimicrobial agent and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Epinephrine Injection, USP is a parenteral adrenergic (sympathomimetic) agent and cardiac stimulant. The drug belongs to the group of endogenous compounds known as catecholamines. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Epinephrine, USP is chemically designated 4-[1-hydroxy-2-(methylamino) ethyl]-1, 2 benzenediol, a white, microcrystalline powder. With acids, it forms salts that are freely soluble in water. Epinephrine has the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1223-1</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CASE (51662-1223-1)  &gt; .3 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51662-1223-01</NDC11Code>
    <ProductNDC>51662-1223</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Epinephrine</ProprietaryName>
    <NonProprietaryName>Epinephrine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20180914</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020800</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>EPINEPHRINE</SubstanceName>
    <StrengthNumber>.3</StrengthNumber>
    <StrengthUnit>mg/.3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Epinephrine injection, USP auto-injector is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injector is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection, USP auto-injector is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.</IndicationAndUsage>
    <Description>Epinephrine injection, USP auto-injector 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP auto-injector 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP auto-injector 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP auto-injector 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP auto-injector 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [see PATIENT COUNSELING INFORMATION (17)].</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1224-1</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CONTAINER (51662-1224-1)  &gt; .3 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51662-1224-01</NDC11Code>
    <ProductNDC>51662-1224</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Epinephrine</ProprietaryName>
    <NonProprietaryName>Epinephrine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20180915</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019430</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>EPINEPHRINE</SubstanceName>
    <StrengthNumber>.3</StrengthNumber>
    <StrengthUnit>mg/.3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>EpiPen and EpiPen Jr are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. EpiPen and EpiPen Jr are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. EpiPen and EpiPen Jr are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.</IndicationAndUsage>
    <Description>EpiPen (epinephrine injection, USP) 0.3 mg and EpiPen Jr (epinephrine injection, USP) 0.15 mg are auto-injectors and combination products containing drug and device components. Each EpiPen Auto-Injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each EpiPen Jr Auto-Injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. The EpiPen and EpiPen Jr each contain 2 mL epinephrine solution. Approximately 1.7 mL remains in the auto-injector after activation, but is not available for future use, and should be discarded. Each 0.3 mL in the EpiPen Auto-Injector contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2–5.0. Each 0.3 mL in the EpiPen Jr Auto-Injector contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace EpiPen and EpiPen Jr if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of EpiPen or EpiPen Jr with patients and caregivers prior to use [see PATIENT COUNSELING INFORMATION (17)].</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1225-1</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CONTAINER (51662-1225-1)  &gt; .3 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>51662-1225-01</NDC11Code>
    <ProductNDC>51662-1225</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Epinephrine</ProprietaryName>
    <NonProprietaryName>Epinephrine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20180915</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019430</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>EPINEPHRINE</SubstanceName>
    <StrengthNumber>.15</StrengthNumber>
    <StrengthUnit>mg/.3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-12-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>EpiPen and EpiPen Jr are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. EpiPen and EpiPen Jr are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. EpiPen and EpiPen Jr are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.</IndicationAndUsage>
    <Description>EpiPen (epinephrine injection, USP) 0.3 mg and EpiPen Jr (epinephrine injection, USP) 0.15 mg are auto-injectors and combination products containing drug and device components. Each EpiPen Auto-Injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each EpiPen Jr Auto-Injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. The EpiPen and EpiPen Jr each contain 2 mL epinephrine solution. Approximately 1.7 mL remains in the auto-injector after activation, but is not available for future use, and should be discarded. Each 0.3 mL in the EpiPen Auto-Injector contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2–5.0. Each 0.3 mL in the EpiPen Jr Auto-Injector contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace EpiPen and EpiPen Jr if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of EpiPen or EpiPen Jr with patients and caregivers prior to use [see PATIENT COUNSELING INFORMATION (17)].</Description>
  </NDC>
  <NDC>
    <NDCCode>51662-1226-3</NDCCode>
    <PackageDescription>25 POUCH in 1 CASE (51662-1226-3)  / 1 VIAL, SINGLE-USE in 1 POUCH (51662-1226-2)  / 10 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>51662-1226-03</NDC11Code>
    <ProductNDC>51662-1226</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180914</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018667</ApplicationNumber>
    <LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220422</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Parenteral therapy should be reserved for patients unable to take oral medication or for patients in emergency clinical situations. Edema. Furosemide is indicated in adults and pediatric patients for the treatment of edema associated with congestive heart failure, cirrhosis of the liver and renal disease, including the nephrotic syndrome. Furosemide is particularly useful when an agent with greater diuretic potential is desired. Furosemide is indicated as adjunctive therapy in acute pulmonary edema. The intravenous administration of furosemide is indicated when a rapid onset of diuresis is desired, e.g., in acute pulmonary edema. If gastrointestinal absorption is impaired or oral medication is not practical for any reason, furosemide is indicated by the intravenous or intramuscular route. Parenteral use should be replaced with oral furosemide as soon as practical.</IndicationAndUsage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Chemically it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide is a white to slightly-yellow crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. It has the following structural formula. Molecular formula: C12H11CI N2O5S. Molecular weight: 330.75. Furosemide Injection, USP is a sterile solution intended for intramuscular or intravenous administration. Each mL contains furosemide 10 mg and sodium chloride sufficient to render solution isotonic in water for injection. Contains sodium hydroxide and may contain hydrochloric acid for pH adjustment. pH is 8.0 to 9.3. The plastic syringe is molded from a specially formulated polypropylene. Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the syringe material. Contains no preservative.</Description>
  </NDC>
</NDCList>