{
"NDC": [
{
"NDCCode": "51662-1695-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1695-3) / 1 VIAL, SINGLE-DOSE in 1 POUCH (51662-1695-2) / 2 mL in 1 VIAL, SINGLE-DOSE (51662-1695-1) ",
"NDC11Code": "51662-1695-03",
"ProductNDC": "51662-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone Sodium Succinate",
"NonProprietaryName": "Methylprednisolone Sodium Succinate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVASCULAR; INTRAVENOUS",
"StartMarketingDate": "20220324",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212396",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "METHYLPREDNISOLONE SODIUM SUCCINATE",
"StrengthNumber": "125",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220324",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible, and the strength, dosage form and route of administration of the drug reasonably lend the preparation to the treatment of the condition, theintravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.",
"Description": "Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below:. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration:. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8."
},
{
"NDCCode": "36987-1695-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1695-3)",
"NDC11Code": "36987-1695-03",
"ProductNDC": "36987-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ginger",
"NonProprietaryName": "Ginger",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "GINGER",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1695-3",
"PackageDescription": "3000 PELLET in 1 BOTTLE, GLASS (37662-1695-3) ",
"NDC11Code": "37662-1695-03",
"ProductNDC": "37662-1695",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hypericum Perforatum",
"NonProprietaryName": "Hypericum Perforatum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20221010",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "HYPERICUM PERFORATUM",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2022-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221010",
"SamplePackage": "N"
},
{
"NDCCode": "67046-1695-3",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (67046-1695-3) ",
"NDC11Code": "67046-1695-03",
"ProductNDC": "67046-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluoxetine",
"NonProprietaryName": "Fluoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20261002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078619",
"LabelerName": "Coupler LLC",
"SubstanceName": "FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-10-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20261002",
"SamplePackage": "N",
"IndicationAndUsage": "Fluoxetine capsules are indicated for the treatment of: 1 Acute and maintenance treatment of Major Depressive Disorder [see Clinical Studies (14.1)] . , 2 Acute and maintenance treatment of obsessions and compulsions in patients with Obsessive Compulsive Disorder (OCD) [see Clinical Studies (14.2)] . , 3 Acute and maintenance treatment of binge-eating and vomiting behaviors in patients with moderate to severe Bulimia Nervosa [see Clinical Studies (14.3)] . , 4 Acute treatment of Panic Disorder, with or without agoraphobia [see Clinical Studies (14.4)] . .",
"Description": "Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro- p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C 17H 18F 3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "67296-1695-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (67296-1695-3) ",
"NDC11Code": "67296-1695-03",
"ProductNDC": "67296-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"NonProprietaryName": "Hydrocodone Bitartrate And Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20181108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211487",
"LabelerName": "RedPharm Drug, Inc.",
"SubstanceName": "ACETAMINOPHEN; HYDROCODONE BITARTRATE",
"StrengthNumber": "325; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20191031",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocodone bitartrate and acetaminophen tablets, USP are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve hydrocodone bitartrate and acetaminophen tablets, USP for use in patients for whom alternative treatment options (e.g., non-opioid analgesics): : 1 have not been tolerated, or are not expected to be tolerated,, 2 have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Hydrocodone bitartrate and acetaminophen, USP is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4' -hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartate and Acetaminophen Tablet, USP contains. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, corn starch, colloidal silicon dioxide, crospovidone, pregelatinized starch, povidone, FD&C Yellow No 6 (for strength 5mg/325 mg), D&C Yellow No 10 (for strength 10 mg/325 mg) and stearic acid. Hydrocodone Bitartrate and Acetaminophen Tablets, USP complies to USP Dissolution Test 1."
},
{
"NDCCode": "71335-1695-3",
"PackageDescription": "8 TABLET in 1 BOTTLE (71335-1695-3) ",
"NDC11Code": "71335-1695-03",
"ProductNDC": "71335-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colchicine",
"NonProprietaryName": "Colchicine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211250",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "COLCHICINE",
"StrengthNumber": ".6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkaloid [EPC], Alkaloids [CS], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Interactions [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220919",
"SamplePackage": "N",
"IndicationAndUsage": "Colchicine tablets are an alkaloid indicated for. · Familial Mediterranean fever (FMF) in adults and children 4 years or older (1.2).",
"Description": "Colchicine is an alkaloid chemically described as (S)N-(5,6,7,9-tetrahydro-1,2,3, 10-tetramethoxy-9-oxobenzo [alpha] heptalen-7-yl) acetamide with a molecular formula of C22H25NO6 and a molecular weight of 399.4. The structural formula of colchicine is given below. Colchicine occurs as a pale yellow powder that is soluble in water. Colchicine Tablets, USP 0.6 mg are supplied for oral administration as Purple colored, capsule shaped, film coated tablets debossed with “C6” on one side and scored on other side., containing 0.6 mg of the active ingredient colchicine, USP. Inactive ingredients: FD&C Blue #2, FD&C Red #40, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, titanium dioxide and triacetin."
},
{
"NDCCode": "71335-1695-6",
"PackageDescription": "3 TABLET in 1 BOTTLE (71335-1695-6) ",
"NDC11Code": "71335-1695-06",
"ProductNDC": "71335-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colchicine",
"NonProprietaryName": "Colchicine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190210",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211250",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "COLCHICINE",
"StrengthNumber": ".6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkaloid [EPC], Alkaloids [CS], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Interactions [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220919",
"SamplePackage": "N",
"IndicationAndUsage": "Colchicine tablets are an alkaloid indicated for. · Familial Mediterranean fever (FMF) in adults and children 4 years or older (1.2).",
"Description": "Colchicine is an alkaloid chemically described as (S)N-(5,6,7,9-tetrahydro-1,2,3, 10-tetramethoxy-9-oxobenzo [alpha] heptalen-7-yl) acetamide with a molecular formula of C22H25NO6 and a molecular weight of 399.4. The structural formula of colchicine is given below. Colchicine occurs as a pale yellow powder that is soluble in water. Colchicine Tablets, USP 0.6 mg are supplied for oral administration as Purple colored, capsule shaped, film coated tablets debossed with “C6” on one side and scored on other side., containing 0.6 mg of the active ingredient colchicine, USP. Inactive ingredients: FD&C Blue #2, FD&C Red #40, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, titanium dioxide and triacetin."
},
{
"NDCCode": "0115-1695-30",
"PackageDescription": "1 CASE in 1 CARTON (0115-1695-30) / 1 SYRINGE, GLASS in 1 CASE / .15 mL in 1 SYRINGE, GLASS",
"NDC11Code": "00115-1695-30",
"ProductNDC": "0115-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20100401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020800",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".15",
"StrengthUnit": "mg/.15mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100401",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine Injection is indicated for the emergency treatment of type I allergic reactions, including anaphylaxis in adult and pediatric patients who weigh 15 kg or greater.",
"Description": "Epinephrine Injection, USP 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each Epinephrine Injection, USP 0.3 mg, delivers a single dose of 0.3 mg epinephrine from Epinephrine Injection, USP (0.3 mL) in a sterile solution. Each Epinephrine Injection, USP 0.15 mg, delivers a single dose of 0.15 mg epinephrine from Epinephrine Injection, USP (0.15 mL) in a sterile solution. Epinephrine Injection, USP 0.3 mg and Epinephrine Injection, USP 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for Epinephrine Injection, USP 0.3 mg and Epinephrine Injection, USP 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in Epinephrine Injection, USP 0.3 mg, contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in Epinephrine Injection, USP 0.15 mg, contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure:. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace Epinephrine Injection, USP if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles."
},
{
"NDCCode": "0115-1695-49",
"PackageDescription": "2 CASE in 1 CARTON (0115-1695-49) / 1 SYRINGE, GLASS in 1 CASE / .15 mL in 1 SYRINGE, GLASS",
"NDC11Code": "00115-1695-49",
"ProductNDC": "0115-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20100401",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020800",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".15",
"StrengthUnit": "mg/.15mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100401",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine Injection is indicated for the emergency treatment of type I allergic reactions, including anaphylaxis in adult and pediatric patients who weigh 15 kg or greater.",
"Description": "Epinephrine Injection, USP 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each Epinephrine Injection, USP 0.3 mg, delivers a single dose of 0.3 mg epinephrine from Epinephrine Injection, USP (0.3 mL) in a sterile solution. Each Epinephrine Injection, USP 0.15 mg, delivers a single dose of 0.15 mg epinephrine from Epinephrine Injection, USP (0.15 mL) in a sterile solution. Epinephrine Injection, USP 0.3 mg and Epinephrine Injection, USP 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for Epinephrine Injection, USP 0.3 mg and Epinephrine Injection, USP 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in Epinephrine Injection, USP 0.3 mg, contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in Epinephrine Injection, USP 0.15 mg, contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure:. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace Epinephrine Injection, USP if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles."
},
{
"NDCCode": "0527-1695-01",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (0527-1695-01) ",
"NDC11Code": "00527-1695-01",
"ProductNDC": "0527-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butalbital, Acetaminophen, And Caffeine",
"NonProprietaryName": "Butalbital, Acetaminophen, And Caffeine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200243",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "BUTALBITAL; ACETAMINOPHEN; CAFFEINE",
"StrengthNumber": "50; 325; 40",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2024-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120913",
"SamplePackage": "N",
"IndicationAndUsage": "Butalbital, acetaminophen, and caffeine tablets, USP are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of this combination product in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.",
"Description": "Butalbital, Acetaminophen, and Caffeine Tablets, USP are supplied in tablet form for oral administration. Each tablet contains the following active ingredients. Butalbital, USP . . . . . . . . . .50 mg. Acetaminophen, USP . . . . .325 mg. Caffeine, USP . . . . . . . . . . .40 mg. Inactive Ingredients: microcrystalline cellulose, crospovidone, croscarmellose sodium, corn starch, stearic acid, colloidal silicon dioxide, magnesium stearate, and FD&C Blue No. 1. Butalbital (5-allyl-5-isobutylbarbituric acid), is a short to intermediate-acting barbiturate. It has the following structural formula. Acetaminophen (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Caffeine (1,3,7-trimethylxanthine), is a central nervous system stimulant. It has the following structural formula."
},
{
"NDCCode": "0527-1695-05",
"PackageDescription": "500 TABLET in 1 BOTTLE, PLASTIC (0527-1695-05) ",
"NDC11Code": "00527-1695-05",
"ProductNDC": "0527-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butalbital, Acetaminophen, And Caffeine",
"NonProprietaryName": "Butalbital, Acetaminophen, And Caffeine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200243",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "BUTALBITAL; ACETAMINOPHEN; CAFFEINE",
"StrengthNumber": "50; 325; 40",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2024-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120913",
"SamplePackage": "N",
"IndicationAndUsage": "Butalbital, acetaminophen, and caffeine tablets, USP are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of this combination product in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.",
"Description": "Butalbital, Acetaminophen, and Caffeine Tablets, USP are supplied in tablet form for oral administration. Each tablet contains the following active ingredients. Butalbital, USP . . . . . . . . . .50 mg. Acetaminophen, USP . . . . .325 mg. Caffeine, USP . . . . . . . . . . .40 mg. Inactive Ingredients: microcrystalline cellulose, crospovidone, croscarmellose sodium, corn starch, stearic acid, colloidal silicon dioxide, magnesium stearate, and FD&C Blue No. 1. Butalbital (5-allyl-5-isobutylbarbituric acid), is a short to intermediate-acting barbiturate. It has the following structural formula. Acetaminophen (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Caffeine (1,3,7-trimethylxanthine), is a central nervous system stimulant. It has the following structural formula."
},
{
"NDCCode": "0781-1695-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (0781-1695-01) ",
"NDC11Code": "00781-1695-01",
"ProductNDC": "0781-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Dinitrate",
"NonProprietaryName": "Isosorbide Dinitrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089367",
"LabelerName": "Sandoz Inc.",
"SubstanceName": "ISOSORBIDE DINITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19880107",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of 70°C and has an optical rotation of +134° (c=1, alcohol, 20°C). Isosorbide dinitrate is freely soluble in organic solvents such as acetone, alcohol, and ether, but is only sparingly soluble in water. Isosorbide dinitrate is available as 5 mg, 10 mg, and 20 mg tablets for oral administration. Inactive ingredients: lactose (monohydrate), magnesium stearate, microcrystalline cellulose. The 5 mg also contains FD & C Red #40 Aluminum Lake. The 20 mg also contains D & C Yellow #10 Aluminum Lake, FD & C Blue #1 Aluminum Lake, and FD & C Yellow #6 Aluminum Lake."
},
{
"NDCCode": "0781-1695-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (0781-1695-10) ",
"NDC11Code": "00781-1695-10",
"ProductNDC": "0781-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Dinitrate",
"NonProprietaryName": "Isosorbide Dinitrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089367",
"LabelerName": "Sandoz Inc.",
"SubstanceName": "ISOSORBIDE DINITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19880107",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of 70°C and has an optical rotation of +134° (c=1, alcohol, 20°C). Isosorbide dinitrate is freely soluble in organic solvents such as acetone, alcohol, and ether, but is only sparingly soluble in water. Isosorbide dinitrate is available as 5 mg, 10 mg, and 20 mg tablets for oral administration. Inactive ingredients: lactose (monohydrate), magnesium stearate, microcrystalline cellulose. The 5 mg also contains FD & C Red #40 Aluminum Lake. The 20 mg also contains D & C Yellow #10 Aluminum Lake, FD & C Blue #1 Aluminum Lake, and FD & C Yellow #6 Aluminum Lake."
},
{
"NDCCode": "43742-1695-1",
"PackageDescription": "30 mL in 1 BOTTLE, DROPPER (43742-1695-1) ",
"NDC11Code": "43742-1695-01",
"ProductNDC": "43742-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Respiratory Plus",
"NonProprietaryName": "Ribes Nigrum, Viburnum Opulus, Quebracho, Blatta Orientalis, Pothos Foetidus, Cinnamic Acid, Gallicum Acidum, Indolum, Quercetin, Rutin, Arsenicum Iodatum, Naphthalinum, Coumarinum, Oxygenium, House Dust Mite, Malvin",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20200922",
"EndMarketingDate": "20290228",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Deseret Biologicals, Inc.",
"SubstanceName": "RIBES NIGRUM LEAF; VIBURNUM OPULUS BARK; ASPIDOSPERMA QUEBRACHO-BLANCO BARK; BLATTA ORIENTALIS; SYMPLOCARPUS FOETIDUS ROOT; CINNAMIC ACID; GALLIC ACID MONOHYDRATE; INDOLE; QUERCETIN; RUTIN; ARSENIC TRIIODIDE; NAPHTHALENE; COUMARIN; OXYGEN; DERMATOPHAGOIDES FARINAE; MALVIN",
"StrengthNumber": "3; 3; 5; 6; 6; 6; 6; 6; 6; 6; 8; 8; 8; 12; 9; 12",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_C]/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Non-Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200922",
"EndMarketingDatePackage": "20290228",
"SamplePackage": "N",
"IndicationAndUsage": " For the temporary relief of symptoms including. supports breathing cough wheezing. These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration."
},
{
"NDCCode": "50436-1695-1",
"PackageDescription": "30 TABLET in 1 BOTTLE (50436-1695-1) ",
"NDC11Code": "50436-1695-01",
"ProductNDC": "50436-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butalbital, Acetaminophen, And Caffeine",
"NonProprietaryName": "Butalbital, Acetaminophen, And Caffeine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200243",
"LabelerName": "Unit Dose Services",
"SubstanceName": "BUTALBITAL; ACETAMINOPHEN; CAFFEINE",
"StrengthNumber": "50; 325; 40",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Barbiturates [CS],Barbiturate [EPC],Central Nervous System Stimulant [EPC],Methylxanthine [EPC],Xanthines [CS],Central Nervous System Stimulation [PE]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20160901",
"SamplePackage": "N",
"IndicationAndUsage": "Butalbital, acetaminophen, and caffeine tablets, USP are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of this combination product in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.",
"Description": "Butalbital, Acetaminophen, and Caffeine Tablets, USP are supplied in tablet form for oral administration. Each tablet contains the following active ingredients. Butalbital, USP 50 mgAcetaminophen, USP 325 mgCaffeine, USP 40 mg. Inactive Ingredients: microcrystalline cellulose, crospovidone, croscarmellose sodium, corn starch, stearic acid, colloidal silicon dioxide, magnesium stearate, and FD&C Blue No. 1. Butalbital (5-allyl-5-isobutylbarbituric acid), is a short to intermediate-acting barbiturate. It has the following structural formula. Acetaminophen (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Caffeine (1,3,7-trimethylxanthine), is a central nervous system stimulant. It has the following structural formula."
},
{
"NDCCode": "50436-1695-2",
"PackageDescription": "60 TABLET in 1 BOTTLE (50436-1695-2) ",
"NDC11Code": "50436-1695-02",
"ProductNDC": "50436-1695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Butalbital, Acetaminophen, And Caffeine",
"NonProprietaryName": "Butalbital, Acetaminophen, And Caffeine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200243",
"LabelerName": "Unit Dose Services",
"SubstanceName": "BUTALBITAL; ACETAMINOPHEN; CAFFEINE",
"StrengthNumber": "50; 325; 40",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Barbiturates [CS],Barbiturate [EPC],Central Nervous System Stimulant [EPC],Methylxanthine [EPC],Xanthines [CS],Central Nervous System Stimulation [PE]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20160901",
"SamplePackage": "N",
"IndicationAndUsage": "Butalbital, acetaminophen, and caffeine tablets, USP are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of this combination product in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.",
"Description": "Butalbital, Acetaminophen, and Caffeine Tablets, USP are supplied in tablet form for oral administration. Each tablet contains the following active ingredients. Butalbital, USP 50 mgAcetaminophen, USP 325 mgCaffeine, USP 40 mg. Inactive Ingredients: microcrystalline cellulose, crospovidone, croscarmellose sodium, corn starch, stearic acid, colloidal silicon dioxide, magnesium stearate, and FD&C Blue No. 1. Butalbital (5-allyl-5-isobutylbarbituric acid), is a short to intermediate-acting barbiturate. It has the following structural formula. Acetaminophen (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Caffeine (1,3,7-trimethylxanthine), is a central nervous system stimulant. It has the following structural formula."
},
{
"NDCCode": "51662-1201-3",
"PackageDescription": "20 POUCH in 1 CASE (51662-1201-3) > 1 mL in 1 POUCH (51662-1201-2) ",
"NDC11Code": "51662-1201-03",
"ProductNDC": "51662-1201",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Adenosine Injection, 6mg/2ml (3mg/ml) Vial",
"NonProprietaryName": "Adenosine Injection, 6mg/2ml (3mg/ml) Vial",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078076",
"LabelerName": "HF Acquisition Co. LLC, DBA Health First",
"SubstanceName": "ADENOSINE",
"StrengthNumber": "3",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N"
},
{
"NDCCode": "51662-1204-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1204-3) / 1 mL in 1 POUCH (51662-1204-2) ",
"NDC11Code": "51662-1204-03",
"ProductNDC": "51662-1204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminophylline",
"NonProprietaryName": "Aminophylline",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA087242",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "AMINOPHYLLINE DIHYDRATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Methylxanthine [EPC], Xanthines [CS]",
"Status": "Active",
"LastUpdate": "2024-01-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous theophylline is indicated as an adjunct to inhaled beta-2 selective agonists and systemically administered corticosteroids for the treatment of acute exacerbations of the symptoms and reversible airflow obstruction associated with asthma and other chronic lung diseases, e.g., emphysema and chronic bronchitis.",
"Description": "Aminophylline Injection, USP is a sterile, nonpyrogenic solution of aminophylline in water for injection. Aminophylline (dihydrate) is approximately 79% of anhydrous theophylline by weight. Aminophylline Injection is administered by slow intravenous injection or diluted and administered by intravenous infusion. The solution contains no bacteriostat or antimicrobial agent and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Aminophylline is a 2:1 complex of theophylline and ethylenediamine. Theophylline is structurally classified as a methylxanthine. Aminophylline occurs as a white or slightly yellowish granule or powder, with a slight ammoniacal odor. Aminophylline has the chemical name 1H-Purine-2, 6-dione, 3,7-dihydro-1,3-dimethyl-, compound with 1,2-ethanediamine (2:1). The structural formula of aminophylline (dihydrate) is as follows. The molecular formula of aminophylline dihydrate is C16H24N10O4 2(H2O) with a molecular weight of 456.46. Aminophylline Injection, USP contains aminophylline (calculated as the dihydrate) 25 mg/mL (equivalent to 19.7 mg/mL anhydrous theophylline) prepared with the aid of ethylenediamine. The solution may contain an excess of ethylenediamine for pH adjustment. pH is 8.8 (8.6 to 9.0). The osmolar concentration is 0.17 mOsmol/mL (calc.)."
},
{
"NDCCode": "51662-1205-1",
"PackageDescription": "3 mL in 1 VIAL, SINGLE-DOSE (51662-1205-1) ",
"NDC11Code": "51662-1205-01",
"ProductNDC": "51662-1205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077234",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180919",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone Hydrochloride Injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone Hydrochloride Injection also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with Amiodarone Hydrochloride Injection, patients may be transferred to oral amiodarone therapy [see Dosage and Administration ( 2)]. Use Amiodarone Hydrochloride Injection for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but Amiodarone Hydrochloride Injection may be safely administered for longer periods if necessary.",
"Description": "Amiodarone Hydrochloride Injection contains Amiodarone Hydrochloride (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone Hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone Hydrochloride has the following structural formula. Amiodarone Hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration (2)]."
},
{
"NDCCode": "51662-1205-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1205-3) / 1 mL in 1 POUCH (51662-1205-2) ",
"NDC11Code": "51662-1205-03",
"ProductNDC": "51662-1205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amiodarone Hydrochloride",
"NonProprietaryName": "Amiodarone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077234",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "AMIODARONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "Amiodarone Hydrochloride Injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone Hydrochloride Injection also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with Amiodarone Hydrochloride Injection, patients may be transferred to oral amiodarone therapy [see Dosage and Administration ( 2)]. Use Amiodarone Hydrochloride Injection for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but Amiodarone Hydrochloride Injection may be safely administered for longer periods if necessary.",
"Description": "Amiodarone Hydrochloride Injection contains Amiodarone Hydrochloride (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone Hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone Hydrochloride has the following structural formula. Amiodarone Hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration (2)]."
},
{
"NDCCode": "51662-1207-3",
"PackageDescription": "10 POUCH in 1 CASE (51662-1207-3) / 1 CARTON in 1 POUCH (51662-1207-2) / 1 SYRINGE, GLASS in 1 CARTON / 10 mL in 1 SYRINGE, GLASS",
"NDC11Code": "51662-1207-03",
"ProductNDC": "51662-1207",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180822",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "HF Acquisition Co. LLC, DBA Health First",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180822",
"SamplePackage": "N",
"IndicationAndUsage": "Atropine Sulfate Injection, USP, is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.",
"Description": "Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.1 mg of atropine sulfate monohydrate equivalent to 0.083 mg of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment 0.308 mOsmol/mL (calc.). pH 3.0 to 6.5. Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na+) and chloride (Cl-) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C17H23NO3)2 ∙ H2SO4 ∙ H2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water."
},
{
"NDCCode": "51662-1208-3",
"PackageDescription": "10 POUCH in 1 CASE (51662-1208-3) / 1 CARTON in 1 POUCH (51662-1208-2) / 1 SYRINGE, GLASS in 1 CARTON / 5 mL in 1 SYRINGE, GLASS",
"NDC11Code": "51662-1208-03",
"ProductNDC": "51662-1208",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atropine Sulfate",
"NonProprietaryName": "Atropine Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180820",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "HF Acquisition Co., LLC, DBA Health First",
"SubstanceName": "ATROPINE SULFATE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221110",
"SamplePackage": "N",
"IndicationAndUsage": "Atropine Sulfate Injection, USP, is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.",
"Description": "Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.1 mg of atropine sulfate monohydrate equivalent to 0.083 mg of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment 0.308 mOsmol/mL (calc.). pH 3.0 to 6.5. Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na+) and chloride (Cl-) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C17H23NO3)2 ∙ H2SO4 ∙ H2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water."
},
{
"NDCCode": "51662-1209-3",
"PackageDescription": "10 POUCH in 1 CASE (51662-1209-3) / 1 CARTON in 1 POUCH (51662-1209-2) / 1 SYRINGE, GLASS in 1 CARTON / 10 mL in 1 SYRINGE, GLASS",
"NDC11Code": "51662-1209-03",
"ProductNDC": "51662-1209",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Chloride",
"NonProprietaryName": "Calcium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; INTRAVENTRICULAR",
"StartMarketingDate": "20180913",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "CALCIUM CHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2024-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221212",
"SamplePackage": "N",
"IndicationAndUsage": "10% Calcium Chloride Injection, USP is indicated (1) for the treatment of hypocalcemia in those conditions requiring a prompt increase in blood plasma calcium levels, (2) in the treatment of magnesium intoxication due to overdosage of magnesium sulfate and (3) to combat the deleterious effects of hyperkalemia as measured by electrocardiographic (ECG), pending correction of the increased potassium level in the extracellular fluid. 10% Calcium Chloride Injection, USP also may be used in cardiac resuscitation when weak or inadequate contractions return following defibrillation or when epinephrine injection has failed to strengthen myocardial contractions.",
"Description": "10% Calcium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution containing 100 mg (1.4 mEq/mL) of calcium chloride, dihydrate (1.4 mEq each of Ca++ and Cl¯) in water for injection. It is provided in a 10 mL Unit of Use Syringe to facilitate prompt intravenous injection. The solution is administered only by intravenous or intraventricular cavity injection as a calcium replenisher. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. As per USP testing, when diluted with water for injection to make a 5% solution, the pH of calcium chloride injection is 6.3 (5.5 to 7.5). May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. The osmolar concentration is 2.04 mOsmol/mL (calc.). 10% Calcium Chloride Injection, USP is oxygen sensitive. Calcium Chloride, USP dihydrate is chemically designated CaCl2 · 2H2O (dihydrate) white, odorless fragments or granules freely soluble in water."
},
{
"NDCCode": "51662-1217-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1217-3) / 1 mL in 1 POUCH (51662-1217-2) ",
"NDC11Code": "51662-1217-03",
"ProductNDC": "51662-1217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Digoxin",
"NonProprietaryName": "Digoxin",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20180913",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA083391",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "DIGOXIN",
"StrengthNumber": ".25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cardiac Glycoside [EPC], Cardiac Glycosides [CS]",
"Status": "Active",
"LastUpdate": "2026-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210112",
"SamplePackage": "N",
"IndicationAndUsage": "1.1 Heart Failure in Adults. Digoxin is indicated for the treatment of mild to moderate heart failure in adults. Digoxin increases left ventricular ejection fraction and improves heart failure symptoms, as evidenced by improved exercise capacity and decreased heart failure-related hospitalizations and emergency care, while having no effect on mortality. Where possible, digoxin should be used in combination with a diuretic and an angiotensin-converting enzyme (ACE) inhibitor. 1.2 Atrial Fibrillation in Adults. Digoxin is indicated for the control of ventricular response rate in adult patients with chronic atrial fibrillation.",
"Description": "Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of two portions: a sugar and a cardenolide (hence “glycosides”). Digoxin has the chemical name: 3β-[(O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β-D-ribo-hexopyranosyl)oxy]-12β,14-dihydroxy-5β-card-20(22)-enolide, and the following structural formula. C41H64O14 MW 780.94. Digoxin exists as odorless white crystals that melt with decomposition above 230°C. The drug is practically insoluble in water and in ether; slightly soluble in diluted (50%) alcohol and in chloroform; and freely soluble in pyridine. Digoxin Injection is a sterile solution for slow intravenous or deep intramuscular injection. Each mL contains digoxin 250 mcg (0.25 mg), alcohol 0.1 mL, propylene glycol 0.4 mL, dibasic sodium phosphate, anhydrous 3 mg and citric acid, anhydrous 0.8 mg in Water for Injection. pH 6.7-7.3; citric acid and/or sodium phosphate added, if necessary, for pH adjustment. Dilution is not required."
},
{
"NDCCode": "51662-1219-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1219-3) / 1 mL in 1 POUCH (51662-1219-2) ",
"NDC11Code": "51662-1219-03",
"ProductNDC": "51662-1219",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diphenhydramine Hydrochloride",
"NonProprietaryName": "Diphenhydramine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20180816",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080817",
"LabelerName": "HF Acquisition Co. LLC, DBA Health First",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200615",
"SamplePackage": "N",
"IndicationAndUsage": "Diphenhydramine Hydrochloride Injection is effective in adults and pediatric patients, other than premature infants and neonates, for the following conditions when the oral form is impractical. Antihistaminic. For amelioration of allergic reactions to blood or plasma, in anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled and for other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated. Motion Sickness. For active treatment of motion sickness. Antiparkinsonism. For use in parkinsonism, when oral therapy is impossible or contraindicated, as follows: parkinsonism in the elderly who are unable to tolerate more potent agents, mild cases of parkinsonism in other age groups and in other cases of parkinsonism in combination with centrally acting anticholinergic agents.",
"Description": "Diphenhydramine Hydrochloride Injection is a sterile, nonpyrogenic solution for intravenous or deep intramuscular use as an antihistaminic agent. Each mL contains diphenhydramine hydrochloride 50 mg and benzethonium chloride 100 mcg in Water for Injection. pH 4.0-6.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The chemical name of diphenhydramine hydrochloride is 2-(Diphenylmethoxy)-N,N-dimethylethylamine hydrochloride. The structural formula is as follows. C17H21NO HCl MW 291.82. Diphenhydramine hydrochloride occurs as a white crystalline powder and is freely soluble in water and alcohol."
},
{
"NDCCode": "51662-1220-3",
"PackageDescription": "25 POUCH in 1 CASE (51662-1220-3) / 1 VIAL, SINGLE-DOSE in 1 POUCH (51662-1220-2) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "51662-1220-03",
"ProductNDC": "51662-1220",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dopamine Hci",
"NonProprietaryName": "Dopamine Hci",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180823",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018132",
"LabelerName": "HF Acquisition Co. LLC, DBA Health First",
"SubstanceName": "DOPAMINE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Catecholamine [EPC], Catecholamines [CS]",
"Status": "Active",
"LastUpdate": "2024-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221110",
"SamplePackage": "N",
"IndicationAndUsage": "Dopamine HCl is indicated for the correction of hemodynamic imbalances present in the shock syndrome due to myocardial infarction, trauma, endotoxic septicemia, open-heart surgery, renal failure, and chronic cardiac decompensation as in congestive failure. Patients most likely to respond adequately to dopamine HCl are those in whom physiological parameters, such as urine flow, myocardial function, and blood pressure, have not undergone profound deterioration. Multiclinic trials indicate that the shorter the time interval between onset of signs and symptoms and initiation of therapy with blood volume correction and dopamine HCl, the better the prognosis. Where appropriate, blood volume restoration with a suitable plasma expander or whole blood should be accomplished prior to administration of dopamine HCl. Poor Perfusion of Vital Organs – Urine flow appears to be one of the better diagnostic signs by which adequacy of vital organ perfusion can be monitored. Nevertheless, the physician should also observe the patient for signs of reversal of confusion or reversal of comatose condition. Loss of pallor, increase in toe temperature, and/or adequacy of nail bed capillary filling may also be used as indices of adequate dosage. Clinical studies have shown that when dopamine HCl is administered before urine flow has diminished to levels of approximately 0.3 mL/minute, prognosis is more favorable. Nevertheless, in a number of oliguric or anuric patients, administration of dopamine HCl has resulted in an increase in urine flow, which in some cases reached normal levels. Dopamine HCl may also increase urine flow in patients whose output is within normal limits and thus may be of value in reducing the degree of pre-existing fluid accumulation. It should be noted that at doses above those optimal for the individual patient, urine flow may decrease, necessitating reduction of dosage. Low Cardiac Output – Increased cardiac output is related to dopamine's direct inotropic effect on the myocardium. Increased cardiac output at low or moderate doses appears to be related to a favorable prognosis. Increase in cardiac output has been associated with either static or decreased systemic vascular resistance (SVR). Static or decreased SVR associated with low or moderate movements in cardiac output is believed to be a reflection of differential effects on specific vascular beds with increased resistance in peripheral beds (e.g., femoral) and concomitant decreases in mesenteric and renal vascular beds. Redistribution of blood flow parallels these changes so that an increase in cardiac output is accompanied by an increase in mesenteric and renal blood flow. In many instances the renal fraction of the total cardiac output has been found to increase. Increase in cardiac output produced by dopamine is not associated with substantial decreases in systemic vascular resistance as may occur with isoproterenol. Hypotension – Hypotension due to inadequate cardiac output can be managed by administration of low to moderate doses of dopamine HCl which have little effect on SVR. At high therapeutic doses, dopamine's alpha-adrenergic activity becomes more prominent and thus may correct hypotension due to diminished SVR. As in the case of other circulatory decompensation states, prognosis is better in patients whose blood pressure and urine flow have not undergone profound deterioration. Therefore, it is suggested that the physician administer dopamine HCl as soon as a definite trend toward decreased systolic and diastolic pressure becomes evident.",
"Description": "Dopamine, a sympathomimetic amine vasopressor, is the naturally occurring immediate precursor of norepinephrine. Dopamine hydrochloride is a white to off-white crystalline powder, which may have a slight odor of hydrochloric acid. It is freely soluble in water and soluble in alcohol. Dopamine HCl is sensitive to alkalies, iron salts, and oxidizing agents. Chemically it is designated as 4-(2-aminoethyl) pyrocatechol hydrochloride, and its molecular formula is C8H11NO2 HCl. The structural formula is. and the molecular weight is 189.64. Dopamine hydrochloride injection is a clear, practically colorless, sterile, pyrogen-free, aqueous solution of dopamine HCl for intravenous infusion after dilution. Each milliliter of the 40 mg/mL preparation contains 40 mg of dopamine hydrochloride (equivalent to 32.31 mg of dopamine base). Each milliliter of the 80 mg/mL preparation contains 80 mg of dopamine hydrochloride (equivalent to 64.62 mg of dopamine base). Each milliliter of both preparations contains the following: Sodium metabisulfite 9 mg added as an antioxidant; citric acid, anhydrous 10 mg; and sodium citrate, dihydrate 5 mg added as a buffer. May contain additional citric acid and/or sodium citrate for pH adjustment. pH is 3.3 (2.5 to 5.0). Dopamine must be diluted in an appropriate sterile parenteral solution before intravenous administration. ( See Dosage and Administration)."
},
{
"NDCCode": "51662-1221-3",
"PackageDescription": "50 POUCH in 1 CASE (51662-1221-3) > 1 mL in 1 POUCH (51662-1221-2) ",
"NDC11Code": "51662-1221-03",
"ProductNDC": "51662-1221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "ENDOTRACHEAL; INTRACARDIAC; INTRAVENOUS",
"StartMarketingDate": "20180917",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210112",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine Injection, USP is indicated for intravenous injection in (1) treatment of acute hypersensitivity (anaphylactoid reactions to drugs, animal serums and other allergens), (2) treatment of acute asthmatic attacks to relieve bronchospasm not controlled by inhalation or subcutaneous administration of other solutions of the drug and (3) treatment and prophylaxis of cardiac arrest and attacks of transitory atrioventricular (A-V) heart block with syncopal seizures (Stokes-Adams Syndrome). In acute attacks of ventricular standstill, physical measures should be applied first. When external cardiac compression and attempts to restore the circulation by electrical defibrillation or use of a pacemaker fail, intracardiac puncture and intramyocardial injection of epinephrine may be effective.",
"Description": "Epinephrine Injection, USP is a sterile, nonpyrogenic solution administered parenterally by the intravenous or intracardiac (left ventricular chamber) routes, or via endotracheal tube into the bronchial tree. Each milliliter (mL) contains epinephrine 0.1 mg; sodium chloride 8.16 mg; sodium metabisulfite added 0.46 mg; citric acid, anhydrous 2 mg and sodium citrate, dihydrate 0.6 mg added as buffers. May contain additional citric acid and/or sodium citrate for pH adjustment. pH 3.3 (2.2 to 5.0). Epinephrine Injection, USP is oxygen sensitive. The solution contains no bacteriostat or antimicrobial agent and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Epinephrine Injection, USP is a parenteral adrenergic (sympathomimetic) agent and cardiac stimulant. The drug belongs to the group of endogenous compounds known as catecholamines. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Epinephrine, USP is chemically designated 4-[1-hydroxy-2-(methylamino) ethyl]-1, 2 benzenediol, a white, microcrystalline powder. With acids, it forms salts that are freely soluble in water. Epinephrine has the following structural formula."
},
{
"NDCCode": "51662-1223-1",
"PackageDescription": "1 SYRINGE, GLASS in 1 CASE (51662-1223-1) > .3 mL in 1 SYRINGE, GLASS",
"NDC11Code": "51662-1223-01",
"ProductNDC": "51662-1223",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20180914",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020800",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".3",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180915",
"SamplePackage": "N",
"IndicationAndUsage": "Epinephrine injection, USP auto-injector is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injector is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection, USP auto-injector is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.",
"Description": "Epinephrine injection, USP auto-injector 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP auto-injector 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP auto-injector 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP auto-injector 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP auto-injector 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [see PATIENT COUNSELING INFORMATION (17)]."
},
{
"NDCCode": "51662-1224-1",
"PackageDescription": "1 SYRINGE, GLASS in 1 CONTAINER (51662-1224-1) > .3 mL in 1 SYRINGE, GLASS",
"NDC11Code": "51662-1224-01",
"ProductNDC": "51662-1224",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20180915",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019430",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".3",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180915",
"SamplePackage": "N",
"IndicationAndUsage": "EpiPen and EpiPen Jr are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. EpiPen and EpiPen Jr are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. EpiPen and EpiPen Jr are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.",
"Description": "EpiPen (epinephrine injection, USP) 0.3 mg and EpiPen Jr (epinephrine injection, USP) 0.15 mg are auto-injectors and combination products containing drug and device components. Each EpiPen Auto-Injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each EpiPen Jr Auto-Injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. The EpiPen and EpiPen Jr each contain 2 mL epinephrine solution. Approximately 1.7 mL remains in the auto-injector after activation, but is not available for future use, and should be discarded. Each 0.3 mL in the EpiPen Auto-Injector contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2–5.0. Each 0.3 mL in the EpiPen Jr Auto-Injector contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace EpiPen and EpiPen Jr if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of EpiPen or EpiPen Jr with patients and caregivers prior to use [see PATIENT COUNSELING INFORMATION (17)]."
},
{
"NDCCode": "51662-1225-1",
"PackageDescription": "1 SYRINGE, GLASS in 1 CONTAINER (51662-1225-1) > .3 mL in 1 SYRINGE, GLASS",
"NDC11Code": "51662-1225-01",
"ProductNDC": "51662-1225",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinephrine",
"NonProprietaryName": "Epinephrine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20180915",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019430",
"LabelerName": "HF Acquisition Co LLC, DBA HealthFirst",
"SubstanceName": "EPINEPHRINE",
"StrengthNumber": ".15",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180915",
"SamplePackage": "N",
"IndicationAndUsage": "EpiPen and EpiPen Jr are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. EpiPen and EpiPen Jr are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. EpiPen and EpiPen Jr are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.",
"Description": "EpiPen (epinephrine injection, USP) 0.3 mg and EpiPen Jr (epinephrine injection, USP) 0.15 mg are auto-injectors and combination products containing drug and device components. Each EpiPen Auto-Injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each EpiPen Jr Auto-Injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. The EpiPen and EpiPen Jr each contain 2 mL epinephrine solution. Approximately 1.7 mL remains in the auto-injector after activation, but is not available for future use, and should be discarded. Each 0.3 mL in the EpiPen Auto-Injector contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2–5.0. Each 0.3 mL in the EpiPen Jr Auto-Injector contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace EpiPen and EpiPen Jr if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of EpiPen or EpiPen Jr with patients and caregivers prior to use [see PATIENT COUNSELING INFORMATION (17)]."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>51662-1695-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1695-3) / 1 VIAL, SINGLE-DOSE in 1 POUCH (51662-1695-2) / 2 mL in 1 VIAL, SINGLE-DOSE (51662-1695-1) </PackageDescription>
<NDC11Code>51662-1695-03</NDC11Code>
<ProductNDC>51662-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
<NonProprietaryName>Methylprednisolone Sodium Succinate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVASCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20220324</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212396</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220324</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form and route of administration of the drug reasonably lend the preparation to the treatment of the condition, theintravenous or intramuscular use of methylprednisolone sodium succinate for injection, USP is indicated as follows. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate, USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione, 21-(3-carboxy-1-oxopropoxy)-11, 17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below:. Methylprednisolone sodium succinate is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly. Methylprednisolone sodium succinate for injection, USP is available in following strengths for intravenous or intramuscular administration:. 40 mg (Single- Dose Vial) Each mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 40 mg methylprednisolone, also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; and 25mg lactose hydrous. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 125 mg (Single- Dose Vial) Each 2 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; and 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. The recommended diluents are Water for Injection USP or Bacteriostatic water for Injection USP. Bacteriostatic Water for Injection USP contains benzyl alcohol as a preservative. 500mg (Multi-Dose) Each 8 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. 1 gram (Multi-Dose) Each 16 mL (when mixed as directed) contains methylprednisolone sodium succinate equivalent to 1 gram methylprednisolone; also 12.8 mg monobasic sodium phosphate anhydrous; 139.2 mg dibasic sodium phosphate dried.This package does not contain diluent. Recommended diluent Bacteriostatic water for Injection contains benzyl alcohol as a preservative. IMPORTANT – Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8.</Description>
</NDC>
<NDC>
<NDCCode>36987-1695-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1695-3)</PackageDescription>
<NDC11Code>36987-1695-03</NDC11Code>
<ProductNDC>36987-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ginger</ProprietaryName>
<NonProprietaryName>Ginger</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>GINGER</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Plant Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Plant Proteins [CS],Food Additives [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1695-3</NDCCode>
<PackageDescription>3000 PELLET in 1 BOTTLE, GLASS (37662-1695-3) </PackageDescription>
<NDC11Code>37662-1695-03</NDC11Code>
<ProductNDC>37662-1695</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hypericum Perforatum</ProprietaryName>
<NonProprietaryName>Hypericum Perforatum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221010</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>HYPERICUM PERFORATUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221010</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67046-1695-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (67046-1695-3) </PackageDescription>
<NDC11Code>67046-1695-03</NDC11Code>
<ProductNDC>67046-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluoxetine</ProprietaryName>
<NonProprietaryName>Fluoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20261002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078619</ApplicationNumber>
<LabelerName>Coupler LLC</LabelerName>
<SubstanceName>FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20261002</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluoxetine capsules are indicated for the treatment of: 1 Acute and maintenance treatment of Major Depressive Disorder [see Clinical Studies (14.1)] . , 2 Acute and maintenance treatment of obsessions and compulsions in patients with Obsessive Compulsive Disorder (OCD) [see Clinical Studies (14.2)] . , 3 Acute and maintenance treatment of binge-eating and vomiting behaviors in patients with moderate to severe Bulimia Nervosa [see Clinical Studies (14.3)] . , 4 Acute treatment of Panic Disorder, with or without agoraphobia [see Clinical Studies (14.4)] . .</IndicationAndUsage>
<Description>Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro- p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C 17H 18F 3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>67296-1695-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (67296-1695-3) </PackageDescription>
<NDC11Code>67296-1695-03</NDC11Code>
<ProductNDC>67296-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211487</ApplicationNumber>
<LabelerName>RedPharm Drug, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; HYDROCODONE BITARTRATE</SubstanceName>
<StrengthNumber>325; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocodone bitartrate and acetaminophen tablets, USP are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve hydrocodone bitartrate and acetaminophen tablets, USP for use in patients for whom alternative treatment options (e.g., non-opioid analgesics): : 1 have not been tolerated, or are not expected to be tolerated,, 2 have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Hydrocodone bitartrate and acetaminophen, USP is available in tablet form for oral administration. Hydrocodone bitartrate is an opioid analgesic and occurs as fine, white crystals or as a crystalline powder. It is affected by light. The chemical name is 4,5α-epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It has the following structural formula. Acetaminophen, 4' -hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Each Hydrocodone Bitartate and Acetaminophen Tablet, USP contains. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, corn starch, colloidal silicon dioxide, crospovidone, pregelatinized starch, povidone, FD&C Yellow No 6 (for strength 5mg/325 mg), D&C Yellow No 10 (for strength 10 mg/325 mg) and stearic acid. Hydrocodone Bitartrate and Acetaminophen Tablets, USP complies to USP Dissolution Test 1.</Description>
</NDC>
<NDC>
<NDCCode>71335-1695-3</NDCCode>
<PackageDescription>8 TABLET in 1 BOTTLE (71335-1695-3) </PackageDescription>
<NDC11Code>71335-1695-03</NDC11Code>
<ProductNDC>71335-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colchicine</ProprietaryName>
<NonProprietaryName>Colchicine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211250</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>COLCHICINE</SubstanceName>
<StrengthNumber>.6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkaloid [EPC], Alkaloids [CS], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Interactions [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Colchicine tablets are an alkaloid indicated for. · Familial Mediterranean fever (FMF) in adults and children 4 years or older (1.2).</IndicationAndUsage>
<Description>Colchicine is an alkaloid chemically described as (S)N-(5,6,7,9-tetrahydro-1,2,3, 10-tetramethoxy-9-oxobenzo [alpha] heptalen-7-yl) acetamide with a molecular formula of C22H25NO6 and a molecular weight of 399.4. The structural formula of colchicine is given below. Colchicine occurs as a pale yellow powder that is soluble in water. Colchicine Tablets, USP 0.6 mg are supplied for oral administration as Purple colored, capsule shaped, film coated tablets debossed with “C6” on one side and scored on other side., containing 0.6 mg of the active ingredient colchicine, USP. Inactive ingredients: FD&C Blue #2, FD&C Red #40, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>71335-1695-6</NDCCode>
<PackageDescription>3 TABLET in 1 BOTTLE (71335-1695-6) </PackageDescription>
<NDC11Code>71335-1695-06</NDC11Code>
<ProductNDC>71335-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colchicine</ProprietaryName>
<NonProprietaryName>Colchicine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190210</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211250</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>COLCHICINE</SubstanceName>
<StrengthNumber>.6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkaloid [EPC], Alkaloids [CS], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Interactions [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Colchicine tablets are an alkaloid indicated for. · Familial Mediterranean fever (FMF) in adults and children 4 years or older (1.2).</IndicationAndUsage>
<Description>Colchicine is an alkaloid chemically described as (S)N-(5,6,7,9-tetrahydro-1,2,3, 10-tetramethoxy-9-oxobenzo [alpha] heptalen-7-yl) acetamide with a molecular formula of C22H25NO6 and a molecular weight of 399.4. The structural formula of colchicine is given below. Colchicine occurs as a pale yellow powder that is soluble in water. Colchicine Tablets, USP 0.6 mg are supplied for oral administration as Purple colored, capsule shaped, film coated tablets debossed with “C6” on one side and scored on other side., containing 0.6 mg of the active ingredient colchicine, USP. Inactive ingredients: FD&C Blue #2, FD&C Red #40, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>0115-1695-30</NDCCode>
<PackageDescription>1 CASE in 1 CARTON (0115-1695-30) / 1 SYRINGE, GLASS in 1 CASE / .15 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>00115-1695-30</NDC11Code>
<ProductNDC>0115-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020800</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>mg/.15mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine Injection is indicated for the emergency treatment of type I allergic reactions, including anaphylaxis in adult and pediatric patients who weigh 15 kg or greater.</IndicationAndUsage>
<Description>Epinephrine Injection, USP 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each Epinephrine Injection, USP 0.3 mg, delivers a single dose of 0.3 mg epinephrine from Epinephrine Injection, USP (0.3 mL) in a sterile solution. Each Epinephrine Injection, USP 0.15 mg, delivers a single dose of 0.15 mg epinephrine from Epinephrine Injection, USP (0.15 mL) in a sterile solution. Epinephrine Injection, USP 0.3 mg and Epinephrine Injection, USP 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for Epinephrine Injection, USP 0.3 mg and Epinephrine Injection, USP 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in Epinephrine Injection, USP 0.3 mg, contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in Epinephrine Injection, USP 0.15 mg, contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure:. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace Epinephrine Injection, USP if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles.</Description>
</NDC>
<NDC>
<NDCCode>0115-1695-49</NDCCode>
<PackageDescription>2 CASE in 1 CARTON (0115-1695-49) / 1 SYRINGE, GLASS in 1 CASE / .15 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>00115-1695-49</NDC11Code>
<ProductNDC>0115-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20100401</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020800</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>mg/.15mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine Injection is indicated for the emergency treatment of type I allergic reactions, including anaphylaxis in adult and pediatric patients who weigh 15 kg or greater.</IndicationAndUsage>
<Description>Epinephrine Injection, USP 0.3 mg and 0.15 mg, are single-dose auto-injectors and combination products containing drug and device components. Each Epinephrine Injection, USP 0.3 mg, delivers a single dose of 0.3 mg epinephrine from Epinephrine Injection, USP (0.3 mL) in a sterile solution. Each Epinephrine Injection, USP 0.15 mg, delivers a single dose of 0.15 mg epinephrine from Epinephrine Injection, USP (0.15 mL) in a sterile solution. Epinephrine Injection, USP 0.3 mg and Epinephrine Injection, USP 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for Epinephrine Injection, USP 0.3 mg and Epinephrine Injection, USP 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in Epinephrine Injection, USP 0.3 mg, contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in Epinephrine Injection, USP 0.15 mg, contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure:. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace Epinephrine Injection, USP if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles.</Description>
</NDC>
<NDC>
<NDCCode>0527-1695-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (0527-1695-01) </PackageDescription>
<NDC11Code>00527-1695-01</NDC11Code>
<ProductNDC>0527-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butalbital, Acetaminophen, And Caffeine</ProprietaryName>
<NonProprietaryName>Butalbital, Acetaminophen, And Caffeine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200243</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>BUTALBITAL; ACETAMINOPHEN; CAFFEINE</SubstanceName>
<StrengthNumber>50; 325; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Butalbital, acetaminophen, and caffeine tablets, USP are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of this combination product in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.</IndicationAndUsage>
<Description>Butalbital, Acetaminophen, and Caffeine Tablets, USP are supplied in tablet form for oral administration. Each tablet contains the following active ingredients. Butalbital, USP . . . . . . . . . .50 mg. Acetaminophen, USP . . . . .325 mg. Caffeine, USP . . . . . . . . . . .40 mg. Inactive Ingredients: microcrystalline cellulose, crospovidone, croscarmellose sodium, corn starch, stearic acid, colloidal silicon dioxide, magnesium stearate, and FD&C Blue No. 1. Butalbital (5-allyl-5-isobutylbarbituric acid), is a short to intermediate-acting barbiturate. It has the following structural formula. Acetaminophen (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Caffeine (1,3,7-trimethylxanthine), is a central nervous system stimulant. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0527-1695-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE, PLASTIC (0527-1695-05) </PackageDescription>
<NDC11Code>00527-1695-05</NDC11Code>
<ProductNDC>0527-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butalbital, Acetaminophen, And Caffeine</ProprietaryName>
<NonProprietaryName>Butalbital, Acetaminophen, And Caffeine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200243</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>BUTALBITAL; ACETAMINOPHEN; CAFFEINE</SubstanceName>
<StrengthNumber>50; 325; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Barbiturate [EPC], Barbiturates [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Butalbital, acetaminophen, and caffeine tablets, USP are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of this combination product in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.</IndicationAndUsage>
<Description>Butalbital, Acetaminophen, and Caffeine Tablets, USP are supplied in tablet form for oral administration. Each tablet contains the following active ingredients. Butalbital, USP . . . . . . . . . .50 mg. Acetaminophen, USP . . . . .325 mg. Caffeine, USP . . . . . . . . . . .40 mg. Inactive Ingredients: microcrystalline cellulose, crospovidone, croscarmellose sodium, corn starch, stearic acid, colloidal silicon dioxide, magnesium stearate, and FD&C Blue No. 1. Butalbital (5-allyl-5-isobutylbarbituric acid), is a short to intermediate-acting barbiturate. It has the following structural formula. Acetaminophen (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Caffeine (1,3,7-trimethylxanthine), is a central nervous system stimulant. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>0781-1695-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (0781-1695-01) </PackageDescription>
<NDC11Code>00781-1695-01</NDC11Code>
<ProductNDC>0781-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Dinitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Dinitrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089367</ApplicationNumber>
<LabelerName>Sandoz Inc.</LabelerName>
<SubstanceName>ISOSORBIDE DINITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880107</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of 70°C and has an optical rotation of +134° (c=1, alcohol, 20°C). Isosorbide dinitrate is freely soluble in organic solvents such as acetone, alcohol, and ether, but is only sparingly soluble in water. Isosorbide dinitrate is available as 5 mg, 10 mg, and 20 mg tablets for oral administration. Inactive ingredients: lactose (monohydrate), magnesium stearate, microcrystalline cellulose. The 5 mg also contains FD & C Red #40 Aluminum Lake. The 20 mg also contains D & C Yellow #10 Aluminum Lake, FD & C Blue #1 Aluminum Lake, and FD & C Yellow #6 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>0781-1695-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (0781-1695-10) </PackageDescription>
<NDC11Code>00781-1695-10</NDC11Code>
<ProductNDC>0781-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Dinitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Dinitrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089367</ApplicationNumber>
<LabelerName>Sandoz Inc.</LabelerName>
<SubstanceName>ISOSORBIDE DINITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880107</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide dinitrate tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of immediate-release oral isosorbide dinitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide dinitrate (ISDN) is 1,4:3,6-dianhydro-D-glucitol 2,5-dinitrate, an organic nitrate whose structural formula is. The organic nitrates are vasodilators, active on both arteries and veins. Isosorbide dinitrate is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of 70°C and has an optical rotation of +134° (c=1, alcohol, 20°C). Isosorbide dinitrate is freely soluble in organic solvents such as acetone, alcohol, and ether, but is only sparingly soluble in water. Isosorbide dinitrate is available as 5 mg, 10 mg, and 20 mg tablets for oral administration. Inactive ingredients: lactose (monohydrate), magnesium stearate, microcrystalline cellulose. The 5 mg also contains FD & C Red #40 Aluminum Lake. The 20 mg also contains D & C Yellow #10 Aluminum Lake, FD & C Blue #1 Aluminum Lake, and FD & C Yellow #6 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>43742-1695-1</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, DROPPER (43742-1695-1) </PackageDescription>
<NDC11Code>43742-1695-01</NDC11Code>
<ProductNDC>43742-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Respiratory Plus</ProprietaryName>
<NonProprietaryName>Ribes Nigrum, Viburnum Opulus, Quebracho, Blatta Orientalis, Pothos Foetidus, Cinnamic Acid, Gallicum Acidum, Indolum, Quercetin, Rutin, Arsenicum Iodatum, Naphthalinum, Coumarinum, Oxygenium, House Dust Mite, Malvin</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200922</StartMarketingDate>
<EndMarketingDate>20290228</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Deseret Biologicals, Inc.</LabelerName>
<SubstanceName>RIBES NIGRUM LEAF; VIBURNUM OPULUS BARK; ASPIDOSPERMA QUEBRACHO-BLANCO BARK; BLATTA ORIENTALIS; SYMPLOCARPUS FOETIDUS ROOT; CINNAMIC ACID; GALLIC ACID MONOHYDRATE; INDOLE; QUERCETIN; RUTIN; ARSENIC TRIIODIDE; NAPHTHALENE; COUMARIN; OXYGEN; DERMATOPHAGOIDES FARINAE; MALVIN</SubstanceName>
<StrengthNumber>3; 3; 5; 6; 6; 6; 6; 6; 6; 6; 8; 8; 8; 12; 9; 12</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_C]/mL; [hp_C]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Antigens, Dermatophagoides [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Insect Proteins [CS], Insect Proteins [CS], Non-Standardized Insect Allergenic Extract [EPC], Standardized Insect Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200922</StartMarketingDatePackage>
<EndMarketingDatePackage>20290228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> For the temporary relief of symptoms including. supports breathing cough wheezing. These statements are based upon homeopathic principles. They have not been reviewed by the Food and Drug Administration.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50436-1695-1</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50436-1695-1) </PackageDescription>
<NDC11Code>50436-1695-01</NDC11Code>
<ProductNDC>50436-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butalbital, Acetaminophen, And Caffeine</ProprietaryName>
<NonProprietaryName>Butalbital, Acetaminophen, And Caffeine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200243</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>BUTALBITAL; ACETAMINOPHEN; CAFFEINE</SubstanceName>
<StrengthNumber>50; 325; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Barbiturates [CS],Barbiturate [EPC],Central Nervous System Stimulant [EPC],Methylxanthine [EPC],Xanthines [CS],Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Butalbital, acetaminophen, and caffeine tablets, USP are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of this combination product in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.</IndicationAndUsage>
<Description>Butalbital, Acetaminophen, and Caffeine Tablets, USP are supplied in tablet form for oral administration. Each tablet contains the following active ingredients. Butalbital, USP 50 mgAcetaminophen, USP 325 mgCaffeine, USP 40 mg. Inactive Ingredients: microcrystalline cellulose, crospovidone, croscarmellose sodium, corn starch, stearic acid, colloidal silicon dioxide, magnesium stearate, and FD&C Blue No. 1. Butalbital (5-allyl-5-isobutylbarbituric acid), is a short to intermediate-acting barbiturate. It has the following structural formula. Acetaminophen (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Caffeine (1,3,7-trimethylxanthine), is a central nervous system stimulant. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>50436-1695-2</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (50436-1695-2) </PackageDescription>
<NDC11Code>50436-1695-02</NDC11Code>
<ProductNDC>50436-1695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Butalbital, Acetaminophen, And Caffeine</ProprietaryName>
<NonProprietaryName>Butalbital, Acetaminophen, And Caffeine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200243</ApplicationNumber>
<LabelerName>Unit Dose Services</LabelerName>
<SubstanceName>BUTALBITAL; ACETAMINOPHEN; CAFFEINE</SubstanceName>
<StrengthNumber>50; 325; 40</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Barbiturates [CS],Barbiturate [EPC],Central Nervous System Stimulant [EPC],Methylxanthine [EPC],Xanthines [CS],Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Butalbital, acetaminophen, and caffeine tablets, USP are indicated for the relief of the symptom complex of tension (or muscle contraction) headache. Evidence supporting the efficacy and safety of this combination product in the treatment of multiple recurrent headaches is unavailable. Caution in this regard is required because butalbital is habit-forming and potentially abusable.</IndicationAndUsage>
<Description>Butalbital, Acetaminophen, and Caffeine Tablets, USP are supplied in tablet form for oral administration. Each tablet contains the following active ingredients. Butalbital, USP 50 mgAcetaminophen, USP 325 mgCaffeine, USP 40 mg. Inactive Ingredients: microcrystalline cellulose, crospovidone, croscarmellose sodium, corn starch, stearic acid, colloidal silicon dioxide, magnesium stearate, and FD&C Blue No. 1. Butalbital (5-allyl-5-isobutylbarbituric acid), is a short to intermediate-acting barbiturate. It has the following structural formula. Acetaminophen (4´-hydroxyacetanilide), is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Caffeine (1,3,7-trimethylxanthine), is a central nervous system stimulant. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>51662-1201-3</NDCCode>
<PackageDescription>20 POUCH in 1 CASE (51662-1201-3) > 1 mL in 1 POUCH (51662-1201-2) </PackageDescription>
<NDC11Code>51662-1201-03</NDC11Code>
<ProductNDC>51662-1201</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Adenosine Injection, 6mg/2ml (3mg/ml) Vial</ProprietaryName>
<NonProprietaryName>Adenosine Injection, 6mg/2ml (3mg/ml) Vial</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078076</ApplicationNumber>
<LabelerName>HF Acquisition Co. LLC, DBA Health First</LabelerName>
<SubstanceName>ADENOSINE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51662-1204-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1204-3) / 1 mL in 1 POUCH (51662-1204-2) </PackageDescription>
<NDC11Code>51662-1204-03</NDC11Code>
<ProductNDC>51662-1204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminophylline</ProprietaryName>
<NonProprietaryName>Aminophylline</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA087242</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>AMINOPHYLLINE DIHYDRATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous theophylline is indicated as an adjunct to inhaled beta-2 selective agonists and systemically administered corticosteroids for the treatment of acute exacerbations of the symptoms and reversible airflow obstruction associated with asthma and other chronic lung diseases, e.g., emphysema and chronic bronchitis.</IndicationAndUsage>
<Description>Aminophylline Injection, USP is a sterile, nonpyrogenic solution of aminophylline in water for injection. Aminophylline (dihydrate) is approximately 79% of anhydrous theophylline by weight. Aminophylline Injection is administered by slow intravenous injection or diluted and administered by intravenous infusion. The solution contains no bacteriostat or antimicrobial agent and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Aminophylline is a 2:1 complex of theophylline and ethylenediamine. Theophylline is structurally classified as a methylxanthine. Aminophylline occurs as a white or slightly yellowish granule or powder, with a slight ammoniacal odor. Aminophylline has the chemical name 1H-Purine-2, 6-dione, 3,7-dihydro-1,3-dimethyl-, compound with 1,2-ethanediamine (2:1). The structural formula of aminophylline (dihydrate) is as follows. The molecular formula of aminophylline dihydrate is C16H24N10O4 2(H2O) with a molecular weight of 456.46. Aminophylline Injection, USP contains aminophylline (calculated as the dihydrate) 25 mg/mL (equivalent to 19.7 mg/mL anhydrous theophylline) prepared with the aid of ethylenediamine. The solution may contain an excess of ethylenediamine for pH adjustment. pH is 8.8 (8.6 to 9.0). The osmolar concentration is 0.17 mOsmol/mL (calc.).</Description>
</NDC>
<NDC>
<NDCCode>51662-1205-1</NDCCode>
<PackageDescription>3 mL in 1 VIAL, SINGLE-DOSE (51662-1205-1) </PackageDescription>
<NDC11Code>51662-1205-01</NDC11Code>
<ProductNDC>51662-1205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077234</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone Hydrochloride Injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone Hydrochloride Injection also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with Amiodarone Hydrochloride Injection, patients may be transferred to oral amiodarone therapy [see Dosage and Administration ( 2)]. Use Amiodarone Hydrochloride Injection for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but Amiodarone Hydrochloride Injection may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone Hydrochloride Injection contains Amiodarone Hydrochloride (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone Hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone Hydrochloride has the following structural formula. Amiodarone Hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>51662-1205-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1205-3) / 1 mL in 1 POUCH (51662-1205-2) </PackageDescription>
<NDC11Code>51662-1205-03</NDC11Code>
<ProductNDC>51662-1205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amiodarone Hydrochloride</ProprietaryName>
<NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077234</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>AMIODARONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amiodarone Hydrochloride Injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone Hydrochloride Injection also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with Amiodarone Hydrochloride Injection, patients may be transferred to oral amiodarone therapy [see Dosage and Administration ( 2)]. Use Amiodarone Hydrochloride Injection for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but Amiodarone Hydrochloride Injection may be safely administered for longer periods if necessary.</IndicationAndUsage>
<Description>Amiodarone Hydrochloride Injection contains Amiodarone Hydrochloride (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone Hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone Hydrochloride has the following structural formula. Amiodarone Hydrochloride is a white to slightly yellow crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone Hydrochloride Injection is a sterile clear, pale-yellow micellar solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone Hydrochloride Injection contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [(see Dosage and Administration (2)].</Description>
</NDC>
<NDC>
<NDCCode>51662-1207-3</NDCCode>
<PackageDescription>10 POUCH in 1 CASE (51662-1207-3) / 1 CARTON in 1 POUCH (51662-1207-2) / 1 SYRINGE, GLASS in 1 CARTON / 10 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>51662-1207-03</NDC11Code>
<ProductNDC>51662-1207</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180822</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>HF Acquisition Co. LLC, DBA Health First</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180822</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atropine Sulfate Injection, USP, is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.</IndicationAndUsage>
<Description>Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.1 mg of atropine sulfate monohydrate equivalent to 0.083 mg of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment 0.308 mOsmol/mL (calc.). pH 3.0 to 6.5. Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na+) and chloride (Cl-) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C17H23NO3)2 ∙ H2SO4 ∙ H2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>51662-1208-3</NDCCode>
<PackageDescription>10 POUCH in 1 CASE (51662-1208-3) / 1 CARTON in 1 POUCH (51662-1208-2) / 1 SYRINGE, GLASS in 1 CARTON / 5 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>51662-1208-03</NDC11Code>
<ProductNDC>51662-1208</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Atropine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180820</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>HF Acquisition Co., LLC, DBA Health First</LabelerName>
<SubstanceName>ATROPINE SULFATE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atropine Sulfate Injection, USP, is indicated for temporary blockade of severe or life threatening muscarinic effects, e.g., as an antisialagogue, an antivagal agent, an antidote for organophosphorus or muscarinic mushroom poisoning, and to treat bradyasystolic cardiac arrest.</IndicationAndUsage>
<Description>Atropine Sulfate Injection, USP is a sterile, nonpyrogenic isotonic solution of atropine sulfate monohydrate in water for injection with sodium chloride sufficient to render the solution isotonic. It is administered parenterally by intravenous injection. Each milliliter (mL) contains 0.1 mg of atropine sulfate monohydrate equivalent to 0.083 mg of atropine, and sodium chloride, 9 mg. May contain sodium hydroxide and/or sulfuric acid for pH adjustment 0.308 mOsmol/mL (calc.). pH 3.0 to 6.5. Sodium chloride added to render the solution isotonic for injection of the active ingredient is present in amounts insufficient to affect serum electrolyte balance of sodium (Na+) and chloride (Cl-) ions. The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Atropine Sulfate, USP is chemically designated 1α H, 5α H-Tropan-3-α-ol (±)-tropate (ester), sulfate (2:1) (salt) monohydrate, (C17H23NO3)2 ∙ H2SO4 ∙ H2O, colorless crystals or white crystalline powder very soluble in water. It has the following structural formula. Atropine, a naturally occurring belladonna alkaloid, is a racemic mixture of equal parts of d- and 1-hyocyamine, whose activity is due almost entirely to the levo isomer of the drug. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>51662-1209-3</NDCCode>
<PackageDescription>10 POUCH in 1 CASE (51662-1209-3) / 1 CARTON in 1 POUCH (51662-1209-2) / 1 SYRINGE, GLASS in 1 CARTON / 10 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>51662-1209-03</NDC11Code>
<ProductNDC>51662-1209</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Chloride</ProprietaryName>
<NonProprietaryName>Calcium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; INTRAVENTRICULAR</RouteName>
<StartMarketingDate>20180913</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>CALCIUM CHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>10% Calcium Chloride Injection, USP is indicated (1) for the treatment of hypocalcemia in those conditions requiring a prompt increase in blood plasma calcium levels, (2) in the treatment of magnesium intoxication due to overdosage of magnesium sulfate and (3) to combat the deleterious effects of hyperkalemia as measured by electrocardiographic (ECG), pending correction of the increased potassium level in the extracellular fluid. 10% Calcium Chloride Injection, USP also may be used in cardiac resuscitation when weak or inadequate contractions return following defibrillation or when epinephrine injection has failed to strengthen myocardial contractions.</IndicationAndUsage>
<Description>10% Calcium Chloride Injection, USP is a sterile, nonpyrogenic, hypertonic solution containing 100 mg (1.4 mEq/mL) of calcium chloride, dihydrate (1.4 mEq each of Ca++ and Cl¯) in water for injection. It is provided in a 10 mL Unit of Use Syringe to facilitate prompt intravenous injection. The solution is administered only by intravenous or intraventricular cavity injection as a calcium replenisher. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. As per USP testing, when diluted with water for injection to make a 5% solution, the pH of calcium chloride injection is 6.3 (5.5 to 7.5). May contain hydrochloric acid and/or sodium hydroxide for pH adjustment. The osmolar concentration is 2.04 mOsmol/mL (calc.). 10% Calcium Chloride Injection, USP is oxygen sensitive. Calcium Chloride, USP dihydrate is chemically designated CaCl2 · 2H2O (dihydrate) white, odorless fragments or granules freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>51662-1217-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1217-3) / 1 mL in 1 POUCH (51662-1217-2) </PackageDescription>
<NDC11Code>51662-1217-03</NDC11Code>
<ProductNDC>51662-1217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Digoxin</ProprietaryName>
<NonProprietaryName>Digoxin</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20180913</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA083391</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>DIGOXIN</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cardiac Glycoside [EPC], Cardiac Glycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1.1 Heart Failure in Adults. Digoxin is indicated for the treatment of mild to moderate heart failure in adults. Digoxin increases left ventricular ejection fraction and improves heart failure symptoms, as evidenced by improved exercise capacity and decreased heart failure-related hospitalizations and emergency care, while having no effect on mortality. Where possible, digoxin should be used in combination with a diuretic and an angiotensin-converting enzyme (ACE) inhibitor. 1.2 Atrial Fibrillation in Adults. Digoxin is indicated for the control of ventricular response rate in adult patients with chronic atrial fibrillation.</IndicationAndUsage>
<Description>Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of two portions: a sugar and a cardenolide (hence “glycosides”). Digoxin has the chemical name: 3β-[(O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β-D-ribo-hexopyranosyl)oxy]-12β,14-dihydroxy-5β-card-20(22)-enolide, and the following structural formula. C41H64O14 MW 780.94. Digoxin exists as odorless white crystals that melt with decomposition above 230°C. The drug is practically insoluble in water and in ether; slightly soluble in diluted (50%) alcohol and in chloroform; and freely soluble in pyridine. Digoxin Injection is a sterile solution for slow intravenous or deep intramuscular injection. Each mL contains digoxin 250 mcg (0.25 mg), alcohol 0.1 mL, propylene glycol 0.4 mL, dibasic sodium phosphate, anhydrous 3 mg and citric acid, anhydrous 0.8 mg in Water for Injection. pH 6.7-7.3; citric acid and/or sodium phosphate added, if necessary, for pH adjustment. Dilution is not required.</Description>
</NDC>
<NDC>
<NDCCode>51662-1219-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1219-3) / 1 mL in 1 POUCH (51662-1219-2) </PackageDescription>
<NDC11Code>51662-1219-03</NDC11Code>
<ProductNDC>51662-1219</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diphenhydramine Hydrochloride</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20180816</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080817</ApplicationNumber>
<LabelerName>HF Acquisition Co. LLC, DBA Health First</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diphenhydramine Hydrochloride Injection is effective in adults and pediatric patients, other than premature infants and neonates, for the following conditions when the oral form is impractical. Antihistaminic. For amelioration of allergic reactions to blood or plasma, in anaphylaxis as an adjunct to epinephrine and other standard measures after the acute symptoms have been controlled and for other uncomplicated allergic conditions of the immediate type when oral therapy is impossible or contraindicated. Motion Sickness. For active treatment of motion sickness. Antiparkinsonism. For use in parkinsonism, when oral therapy is impossible or contraindicated, as follows: parkinsonism in the elderly who are unable to tolerate more potent agents, mild cases of parkinsonism in other age groups and in other cases of parkinsonism in combination with centrally acting anticholinergic agents.</IndicationAndUsage>
<Description>Diphenhydramine Hydrochloride Injection is a sterile, nonpyrogenic solution for intravenous or deep intramuscular use as an antihistaminic agent. Each mL contains diphenhydramine hydrochloride 50 mg and benzethonium chloride 100 mcg in Water for Injection. pH 4.0-6.5; sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The chemical name of diphenhydramine hydrochloride is 2-(Diphenylmethoxy)-N,N-dimethylethylamine hydrochloride. The structural formula is as follows. C17H21NO HCl MW 291.82. Diphenhydramine hydrochloride occurs as a white crystalline powder and is freely soluble in water and alcohol.</Description>
</NDC>
<NDC>
<NDCCode>51662-1220-3</NDCCode>
<PackageDescription>25 POUCH in 1 CASE (51662-1220-3) / 1 VIAL, SINGLE-DOSE in 1 POUCH (51662-1220-2) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>51662-1220-03</NDC11Code>
<ProductNDC>51662-1220</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dopamine Hci</ProprietaryName>
<NonProprietaryName>Dopamine Hci</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180823</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018132</ApplicationNumber>
<LabelerName>HF Acquisition Co. LLC, DBA Health First</LabelerName>
<SubstanceName>DOPAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Catecholamine [EPC], Catecholamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dopamine HCl is indicated for the correction of hemodynamic imbalances present in the shock syndrome due to myocardial infarction, trauma, endotoxic septicemia, open-heart surgery, renal failure, and chronic cardiac decompensation as in congestive failure. Patients most likely to respond adequately to dopamine HCl are those in whom physiological parameters, such as urine flow, myocardial function, and blood pressure, have not undergone profound deterioration. Multiclinic trials indicate that the shorter the time interval between onset of signs and symptoms and initiation of therapy with blood volume correction and dopamine HCl, the better the prognosis. Where appropriate, blood volume restoration with a suitable plasma expander or whole blood should be accomplished prior to administration of dopamine HCl. Poor Perfusion of Vital Organs – Urine flow appears to be one of the better diagnostic signs by which adequacy of vital organ perfusion can be monitored. Nevertheless, the physician should also observe the patient for signs of reversal of confusion or reversal of comatose condition. Loss of pallor, increase in toe temperature, and/or adequacy of nail bed capillary filling may also be used as indices of adequate dosage. Clinical studies have shown that when dopamine HCl is administered before urine flow has diminished to levels of approximately 0.3 mL/minute, prognosis is more favorable. Nevertheless, in a number of oliguric or anuric patients, administration of dopamine HCl has resulted in an increase in urine flow, which in some cases reached normal levels. Dopamine HCl may also increase urine flow in patients whose output is within normal limits and thus may be of value in reducing the degree of pre-existing fluid accumulation. It should be noted that at doses above those optimal for the individual patient, urine flow may decrease, necessitating reduction of dosage. Low Cardiac Output – Increased cardiac output is related to dopamine's direct inotropic effect on the myocardium. Increased cardiac output at low or moderate doses appears to be related to a favorable prognosis. Increase in cardiac output has been associated with either static or decreased systemic vascular resistance (SVR). Static or decreased SVR associated with low or moderate movements in cardiac output is believed to be a reflection of differential effects on specific vascular beds with increased resistance in peripheral beds (e.g., femoral) and concomitant decreases in mesenteric and renal vascular beds. Redistribution of blood flow parallels these changes so that an increase in cardiac output is accompanied by an increase in mesenteric and renal blood flow. In many instances the renal fraction of the total cardiac output has been found to increase. Increase in cardiac output produced by dopamine is not associated with substantial decreases in systemic vascular resistance as may occur with isoproterenol. Hypotension – Hypotension due to inadequate cardiac output can be managed by administration of low to moderate doses of dopamine HCl which have little effect on SVR. At high therapeutic doses, dopamine's alpha-adrenergic activity becomes more prominent and thus may correct hypotension due to diminished SVR. As in the case of other circulatory decompensation states, prognosis is better in patients whose blood pressure and urine flow have not undergone profound deterioration. Therefore, it is suggested that the physician administer dopamine HCl as soon as a definite trend toward decreased systolic and diastolic pressure becomes evident.</IndicationAndUsage>
<Description>Dopamine, a sympathomimetic amine vasopressor, is the naturally occurring immediate precursor of norepinephrine. Dopamine hydrochloride is a white to off-white crystalline powder, which may have a slight odor of hydrochloric acid. It is freely soluble in water and soluble in alcohol. Dopamine HCl is sensitive to alkalies, iron salts, and oxidizing agents. Chemically it is designated as 4-(2-aminoethyl) pyrocatechol hydrochloride, and its molecular formula is C8H11NO2 HCl. The structural formula is. and the molecular weight is 189.64. Dopamine hydrochloride injection is a clear, practically colorless, sterile, pyrogen-free, aqueous solution of dopamine HCl for intravenous infusion after dilution. Each milliliter of the 40 mg/mL preparation contains 40 mg of dopamine hydrochloride (equivalent to 32.31 mg of dopamine base). Each milliliter of the 80 mg/mL preparation contains 80 mg of dopamine hydrochloride (equivalent to 64.62 mg of dopamine base). Each milliliter of both preparations contains the following: Sodium metabisulfite 9 mg added as an antioxidant; citric acid, anhydrous 10 mg; and sodium citrate, dihydrate 5 mg added as a buffer. May contain additional citric acid and/or sodium citrate for pH adjustment. pH is 3.3 (2.5 to 5.0). Dopamine must be diluted in an appropriate sterile parenteral solution before intravenous administration. ( See Dosage and Administration).</Description>
</NDC>
<NDC>
<NDCCode>51662-1221-3</NDCCode>
<PackageDescription>50 POUCH in 1 CASE (51662-1221-3) > 1 mL in 1 POUCH (51662-1221-2) </PackageDescription>
<NDC11Code>51662-1221-03</NDC11Code>
<ProductNDC>51662-1221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>ENDOTRACHEAL; INTRACARDIAC; INTRAVENOUS</RouteName>
<StartMarketingDate>20180917</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine Injection, USP is indicated for intravenous injection in (1) treatment of acute hypersensitivity (anaphylactoid reactions to drugs, animal serums and other allergens), (2) treatment of acute asthmatic attacks to relieve bronchospasm not controlled by inhalation or subcutaneous administration of other solutions of the drug and (3) treatment and prophylaxis of cardiac arrest and attacks of transitory atrioventricular (A-V) heart block with syncopal seizures (Stokes-Adams Syndrome). In acute attacks of ventricular standstill, physical measures should be applied first. When external cardiac compression and attempts to restore the circulation by electrical defibrillation or use of a pacemaker fail, intracardiac puncture and intramyocardial injection of epinephrine may be effective.</IndicationAndUsage>
<Description>Epinephrine Injection, USP is a sterile, nonpyrogenic solution administered parenterally by the intravenous or intracardiac (left ventricular chamber) routes, or via endotracheal tube into the bronchial tree. Each milliliter (mL) contains epinephrine 0.1 mg; sodium chloride 8.16 mg; sodium metabisulfite added 0.46 mg; citric acid, anhydrous 2 mg and sodium citrate, dihydrate 0.6 mg added as buffers. May contain additional citric acid and/or sodium citrate for pH adjustment. pH 3.3 (2.2 to 5.0). Epinephrine Injection, USP is oxygen sensitive. The solution contains no bacteriostat or antimicrobial agent and is intended for use only as a single-dose injection. When smaller doses are required the unused portion should be discarded. Epinephrine Injection, USP is a parenteral adrenergic (sympathomimetic) agent and cardiac stimulant. The drug belongs to the group of endogenous compounds known as catecholamines. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Epinephrine, USP is chemically designated 4-[1-hydroxy-2-(methylamino) ethyl]-1, 2 benzenediol, a white, microcrystalline powder. With acids, it forms salts that are freely soluble in water. Epinephrine has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>51662-1223-1</NDCCode>
<PackageDescription>1 SYRINGE, GLASS in 1 CASE (51662-1223-1) > .3 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>51662-1223-01</NDC11Code>
<ProductNDC>51662-1223</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20180914</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020800</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.3</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinephrine injection, USP auto-injector is indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which includes bees, wasps, hornets, yellow jackets and fire ants), and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media), and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. Epinephrine injection, USP auto-injector is intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria, or angioedema. Epinephrine injection, USP auto-injector is intended for immediate administration as emergency supportive therapy only and is not a replacement or substitute for immediate medical care.</IndicationAndUsage>
<Description>Epinephrine injection, USP auto-injector 0.3 mg and 0.15 mg is an auto-injector and a combination product containing drug and device components. Each epinephrine injection, USP auto-injector 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP (0.3 mL) in a sterile solution. Each epinephrine injection, USP auto-injector 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP (0.15 mL) in a sterile solution. Epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg each contain 1.1 mL of epinephrine solution. 0.3 mL and 0.15 mL epinephrine solution are dispensed for epinephrine injection, USP auto-injector 0.3 mg and epinephrine injection, USP auto-injector 0.15 mg, respectively, when activated. The solution remaining after activation is not available for future use and should be discarded. Each 0.3 mL in epinephrine injection, USP auto-injector 0.3 mg contains 0.3 mg epinephrine, 2.6 mg sodium chloride, not more than 1.5 mg chlorobutanol, 0.45 mg sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Each 0.15 mL in epinephrine injection, USP auto-injector 0.15 mg contains 0.15 mg epinephrine, 1.3 mg sodium chloride, not more than 0.75 mg chlorobutanol, 0.225 sodium bisulfite, hydrochloric acid and sodium hydroxide to adjust pH, and water for injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4-Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace epinephrine injection, USP auto-injector if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of epinephrine injection, USP auto-injector with patients and caregivers prior to use [see PATIENT COUNSELING INFORMATION (17)].</Description>
</NDC>
<NDC>
<NDCCode>51662-1224-1</NDCCode>
<PackageDescription>1 SYRINGE, GLASS in 1 CONTAINER (51662-1224-1) > .3 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>51662-1224-01</NDC11Code>
<ProductNDC>51662-1224</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20180915</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019430</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.3</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EpiPen and EpiPen Jr are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. EpiPen and EpiPen Jr are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. EpiPen and EpiPen Jr are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.</IndicationAndUsage>
<Description>EpiPen (epinephrine injection, USP) 0.3 mg and EpiPen Jr (epinephrine injection, USP) 0.15 mg are auto-injectors and combination products containing drug and device components. Each EpiPen Auto-Injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each EpiPen Jr Auto-Injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. The EpiPen and EpiPen Jr each contain 2 mL epinephrine solution. Approximately 1.7 mL remains in the auto-injector after activation, but is not available for future use, and should be discarded. Each 0.3 mL in the EpiPen Auto-Injector contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2–5.0. Each 0.3 mL in the EpiPen Jr Auto-Injector contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace EpiPen and EpiPen Jr if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of EpiPen or EpiPen Jr with patients and caregivers prior to use [see PATIENT COUNSELING INFORMATION (17)].</Description>
</NDC>
<NDC>
<NDCCode>51662-1225-1</NDCCode>
<PackageDescription>1 SYRINGE, GLASS in 1 CONTAINER (51662-1225-1) > .3 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>51662-1225-01</NDC11Code>
<ProductNDC>51662-1225</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinephrine</ProprietaryName>
<NonProprietaryName>Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20180915</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019430</ApplicationNumber>
<LabelerName>HF Acquisition Co LLC, DBA HealthFirst</LabelerName>
<SubstanceName>EPINEPHRINE</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Catecholamine [EPC], Catecholamines [CS], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EpiPen and EpiPen Jr are indicated in the emergency treatment of allergic reactions (Type I) including anaphylaxis to stinging insects (e.g., order Hymenoptera, which include bees, wasps, hornets, yellow jackets and fire ants) and biting insects (e.g., triatoma, mosquitoes), allergen immunotherapy, foods, drugs, diagnostic testing substances (e.g., radiocontrast media) and other allergens, as well as idiopathic anaphylaxis or exercise-induced anaphylaxis. EpiPen and EpiPen Jr are intended for immediate administration in patients who are determined to be at increased risk for anaphylaxis, including individuals with a history of anaphylactic reactions. Anaphylactic reactions may occur within minutes after exposure and consist of flushing, apprehension, syncope, tachycardia, thready or unobtainable pulse associated with a fall in blood pressure, convulsions, vomiting, diarrhea and abdominal cramps, involuntary voiding, wheezing, dyspnea due to laryngeal spasm, pruritus, rashes, urticaria or angioedema. EpiPen and EpiPen Jr are intended for immediate administration as emergency supportive therapy only and are not a substitute for immediate medical care.</IndicationAndUsage>
<Description>EpiPen (epinephrine injection, USP) 0.3 mg and EpiPen Jr (epinephrine injection, USP) 0.15 mg are auto-injectors and combination products containing drug and device components. Each EpiPen Auto-Injector, 0.3 mg delivers a single dose of 0.3 mg epinephrine from epinephrine injection, USP 0.3 mg/0.3 mL in a sterile solution. Each EpiPen Jr Auto-Injector, 0.15 mg delivers a single dose of 0.15 mg epinephrine from epinephrine injection, USP 0.15 mg/0.3 mL in a sterile solution. The EpiPen and EpiPen Jr each contain 2 mL epinephrine solution. Approximately 1.7 mL remains in the auto-injector after activation, but is not available for future use, and should be discarded. Each 0.3 mL in the EpiPen Auto-Injector contains 0.3 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2–5.0. Each 0.3 mL in the EpiPen Jr Auto-Injector contains 0.15 mg epinephrine, 1.8 mg sodium chloride, 0.5 mg sodium metabisulfite, hydrochloric acid to adjust pH, and Water for Injection. The pH range is 2.2-5.0. Epinephrine is a sympathomimetic catecholamine. Chemically, epinephrine is (-)-3,4- Dihydroxy-α-[(methylamino)methyl]benzyl alcohol with the following structure. Epinephrine solution deteriorates rapidly on exposure to air or light, turning pink from oxidation to adrenochrome and brown from the formation of melanin. Replace EpiPen and EpiPen Jr if the epinephrine solution appears discolored (pinkish or brown color), cloudy, or contains particles. Thoroughly review the patient instructions and operation of EpiPen or EpiPen Jr with patients and caregivers prior to use [see PATIENT COUNSELING INFORMATION (17)].</Description>
</NDC>
</NDCList>