{
"NDC": [
{
"NDCCode": "51754-5002-5",
"PackageDescription": "20 VIAL in 1 CARTON (51754-5002-5) > 50 mL in 1 VIAL",
"NDC11Code": "51754-5002-05",
"ProductNDC": "51754-5002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Bicarbonate",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211091",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Alkalinizing Activity [MoA]",
"Status": "Active",
"LastUpdate": "2022-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200901",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Bicarbonate Injection, USP is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis - e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial - e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.",
"Description": "Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2%, 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solutions is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3-. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O."
},
{
"NDCCode": "0220-5002-41",
"PackageDescription": "5 [hp_C] in 1 TUBE (0220-5002-41) ",
"NDC11Code": "00220-5002-41",
"ProductNDC": "0220-5002",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Thuja Occidentalis",
"NonProprietaryName": "Thuja Occidentalis Leafy Twig",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "19830303",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Boiron",
"SubstanceName": "THUJA OCCIDENTALIS LEAFY TWIG",
"StrengthNumber": "5",
"StrengthUnit": "[hp_C]/5[hp_C]",
"Status": "Active",
"LastUpdate": "2025-11-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19830303",
"SamplePackage": "N",
"IndicationAndUsage": "Relieves warts *. Uses: See symptoms on front panel."
},
{
"NDCCode": "22840-5002-5",
"PackageDescription": "5 mL in 1 BOTTLE, DROPPER (22840-5002-5) ",
"NDC11Code": "22840-5002-05",
"ProductNDC": "22840-5002",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Fire Ant",
"NonProprietaryName": "Solenopsis Richteri",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "SOLENOPSIS RICHTERI",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Ant Venoms [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Non-Standardized Insect Venom Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "46145-5002-5",
"PackageDescription": "1003.025 L in 1 CONTAINER (46145-5002-5) ",
"NDC11Code": "46145-5002-05",
"ProductNDC": "46145-5002",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer U",
"NonProprietaryName": "Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200330",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "CFB Michigan Inc",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "80",
"StrengthUnit": "L/100L",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200330",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available."
},
{
"NDCCode": "63240-5002-2",
"PackageDescription": "1 JAR in 1 BOX (63240-5002-2) > 67.5 g in 1 JAR (63240-5002-1) ",
"NDC11Code": "63240-5002-02",
"ProductNDC": "63240-5002",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Shunga",
"ProprietaryNameSuffix": "Sensation Balm",
"NonProprietaryName": "Benzocain",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20000101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Eau Zone Oils and Fragrances LTD",
"SubstanceName": "BENZOCAINE",
"StrengthNumber": "5.07",
"StrengthUnit": "g/67.5g",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20000101",
"SamplePackage": "N",
"IndicationAndUsage": "Directions ■ Apply a small amount ( 1 to 3 cc ) to head and shaft of penis before intercourse, or as directed by a doctor. ■ Wipe off excedent before relation."
},
{
"NDCCode": "65044-5002-1",
"PackageDescription": "5 mL in 1 VIAL (65044-5002-1) ",
"NDC11Code": "65044-5002-01",
"ProductNDC": "65044-5002",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Molds - Mold Mix 4",
"NonProprietaryName": "Molds - Mold Mix 4",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS",
"StartMarketingDate": "19410419",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103888",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "ALTERNARIA ALTERNATA; ASPERGILLUS FUMIGATUS; ASPERGILLUS NIDULANS; ASPERGILLUS NIGER VAR. NIGER; ASPERGILLUS TERREUS; CLADOSPORIUM CLADOSPORIOIDES; PENICILLIUM DIGITATUM; PENICILLIUM EXPANSUM; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; CLONOSTACHYS ROSEA F. ROSEA",
"StrengthNumber": ".1; .025; .025; .025; .025; .1; .025; .05; .025; .025",
"StrengthUnit": "g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL",
"Pharm_Classes": "Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19410419",
"SamplePackage": "N",
"IndicationAndUsage": "NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.",
"Description": "Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas."
},
{
"NDCCode": "83035-5002-5",
"PackageDescription": "1 TUBE in 1 BOX (83035-5002-5) / 150 mL in 1 TUBE",
"NDC11Code": "83035-5002-05",
"ProductNDC": "83035-5002",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lintera Wash",
"NonProprietaryName": "Benzoyl Peroxide",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230801",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M006",
"LabelerName": "Singular Dreamer dba True Marker",
"SubstanceName": "BENZOYL PEROXIDE",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Status": "Deprecated",
"LastUpdate": "2024-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20230801",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of acne."
},
{
"NDCCode": "83103-5002-1",
"PackageDescription": "1 TUBE in 1 PACKAGE (83103-5002-1) / 3.5 g in 1 TUBE",
"NDC11Code": "83103-5002-01",
"ProductNDC": "83103-5002",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ciele Lip And Protect Lipstick Spf 60 Kelly",
"NonProprietaryName": "Ciele Lip And Protect Lipstick Spf 60 Kelly",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20260507",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "L�E COSMETICS INC",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "15",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260507",
"SamplePackage": "N",
"IndicationAndUsage": "● helps prevent sunburn ● if used as directed with other sun protection meausres (see directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "51754-0203-2",
"PackageDescription": "5 VIAL in 1 CARTON (51754-0203-2) > 2 mL in 1 VIAL",
"NDC11Code": "51754-0203-02",
"ProductNDC": "51754-0203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160422",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018925",
"LabelerName": "EXELA PHARMA SCIENCES, LLC",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160422",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil is indicated for the treatment of supraventricular tachyarrhythmias, including: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to Verapamil administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation, except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes).",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) and 10-mg (4 ml) vials. Each form contains Verapamil HCl 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of verapamil HCl is given below. Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "51754-0204-2",
"PackageDescription": "5 VIAL in 1 CARTON (51754-0204-2) > 2 mL in 1 VIAL",
"NDC11Code": "51754-0204-02",
"ProductNDC": "51754-0204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018925",
"LabelerName": "EXELA PHARMA SCIENCES, LLC",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2017-02-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170201",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil is indicated for the treatment of supraventricular tachyarrhythmias, including: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to Verapamil administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation, except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes).",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) vials. Each vial contains Verapamil hydrochloride 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of Verapamil HCl is given below. Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4-dimethoxyα-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "51754-0205-2",
"PackageDescription": "5 VIAL in 1 CARTON (51754-0205-2) > 4 mL in 1 VIAL",
"NDC11Code": "51754-0205-02",
"ProductNDC": "51754-0205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180611",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018925",
"LabelerName": "EXELA PHARMA SCIENCES, LLC",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180611",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil is indicated for the treatment of supraventricular tachyarrhythmias, including: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to Verapamil administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation, except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes).",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) and 10-mg (4 ml) vials. Each form contains Verapamil HCl 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of verapamil HCl is given below. Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "51754-0501-2",
"PackageDescription": "5 VIAL in 1 CARTON (51754-0501-2) > 3 mL in 1 VIAL",
"NDC11Code": "51754-0501-02",
"ProductNDC": "51754-0501",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Caffeine Citrate",
"NonProprietaryName": "Caffeine Citrate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20060921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077304",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "CAFFEINE CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]",
"Status": "Active",
"LastUpdate": "2020-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190831",
"SamplePackage": "N",
"IndicationAndUsage": "Caffeine citrate injection and caffeine citrate oral solution are indicated for the short term treatment of apnea of prematurity in infants between 28 and <33 weeks gestational age.",
"Description": "Both caffeine citrate injection for intravenous administration and caffeine citrate oral solution are clear, colorless, sterile, non-pyrogenic, preservative-free, aqueous solutions adjusted to pH 4.7. Each mL contains 20 mg caffeine citrate (equivalent to 10 mg of caffeine base) prepared in solution by the addition of 10 mg caffeine anhydrous to 5.0 mg citric acid monohydrate, 8.3 mg sodium citrate dihydrate and Water for Injection. Caffeine, a central nervous system stimulant, is an odorless white crystalline powder or granule, with a bitter taste. It is sparingly soluble in water and ethanol at room temperature. The chemical name of caffeine is 3,7-dihydro-1,3,7- trimethyl-1H-purine-2,6-dione. In the presence of citric acid it forms caffeine citrate salt in solution. The structural formula and molecular weight of caffeine citrate follows."
},
{
"NDCCode": "51754-1200-3",
"PackageDescription": "10 SYRINGE, PLASTIC in 1 CARTON (51754-1200-3) / 5 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "51754-1200-03",
"ProductNDC": "51754-1200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bloxiverz",
"NonProprietaryName": "Neostigmine Methylsulfate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20231106",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204078",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "NEOSTIGMINE METHYLSULFATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-01-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231231",
"SamplePackage": "N",
"IndicationAndUsage": "BLOXIVERZ, is a cholinesterase inhibitor, indicated for the reversal of the effects of non-depolarizing neuromuscular blocking agents after surgery.",
"Description": "Neostigmine methylsulfate, a cholinesterase inhibitor, is (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. The structural formula is. Neostigmine methylsulfate is a white crystalline powder and is very soluble in water and soluble in alcohol. BLOXIVERZ is a sterile, nonpyrogenic solution intended for intravenous use. Each mL of the 0.5 mg/mL strength contains neostigmine methylsulfate 0.5 mg, phenol 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 1 mg/mL strength contains neostigmine methylsulfate 1 mg, phenol 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 5 mL single-dose prefilled syringe contains 1 mg neostigmine methylsulfate, USP, 90 mg sodium chloride, USP and 1 mg sodium acetate trihydrate, USP in water for injection. May contain sodium hydroxide, NF and/or glacial acetic acid, USP as needed for pH adjustment to achieve a value of 5.5."
},
{
"NDCCode": "51754-4000-3",
"PackageDescription": "1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (51754-4000-3) > 5 mL in 1 VIAL, PHARMACY BULK PACKAGE",
"NDC11Code": "51754-4000-03",
"ProductNDC": "51754-4000",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vazculep",
"NonProprietaryName": "Phenylephrine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210326",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204300",
"LabelerName": "Exela Phrama Sciences, LLC",
"SubstanceName": "PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210326",
"SamplePackage": "N",
"IndicationAndUsage": "VAZCULEP is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.",
"Description": "Phenylephrine is an α-1 adrenergic receptor agonist. VAZCULEP (phenylephrine hydrochloride) Injection, 10 mg/mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. VAZCULEP (phenylephrine hydrochloride) Injection, 10 mg/mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5 to 5.5."
},
{
"NDCCode": "51754-4250-3",
"PackageDescription": "10 SYRINGE, PLASTIC in 1 CARTON (51754-4250-3) > 5 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "51754-4250-03",
"ProductNDC": "51754-4250",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Akovaz",
"NonProprietaryName": "Ephedrine Sulfate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210510",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208289",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "EPHEDRINE SULFATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Increased Norepinephrine Activity [PE], Norepinephrine Releasing Agent [EPC], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-12-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210510",
"SamplePackage": "N",
"IndicationAndUsage": "AKOVAZ (ephedrine sulfate injection) is indicated for the treatment of clinically important hypotension occurring in the setting of anesthesia.",
"Description": "Ephedrine is an alpha- and beta-adrenergic agonist and a norepinephrine-releasing agent. AKOVAZ (ephedrine sulfate injection) is a clear, colorless, sterile solution for intravenous injection. The chemical name of ephedrine sulfate is benzenemethanol, α-[1-(methylamino)ethyl]-, [R-(R*,S*)]-, sulfate (2:1) (salt), and the molecular weight is 428.5 g/mol. Its structural formula is depicted below:. Ephedrine sulfate is freely soluble in water and ethanol, very slightly soluble in chloroform, and practically insoluble in ether. Each mL of the 50 mg/mL strength contains ephedrine sulfate 50 mg (equivalent to 38 mg ephedrine base) in water for injection. The pH is adjusted with sodium hydroxide and/or glacial acetic acid if necessary. The pH range is 4.5 to 7.0. The 50 mg/mL vial must be diluted before intravenous administration. Each mL of the 5 mL single-dose prefilled syringe contains 5 mg (equivalent to 3.8 mg ephedrine base) and 9 mg Sodium Chloride, USP in Water for Injection. The pH range is 4.5 to 6.5."
},
{
"NDCCode": "51754-5001-5",
"PackageDescription": "20 VIAL in 1 CARTON (51754-5001-5) > 50 mL in 1 VIAL",
"NDC11Code": "51754-5001-05",
"ProductNDC": "51754-5001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Bicarbonate",
"NonProprietaryName": "Sodium Bicarbonate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211091",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "SODIUM BICARBONATE",
"StrengthNumber": "84",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Alkalinizing Activity [MoA]",
"Status": "Active",
"LastUpdate": "2022-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190801",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Bicarbonate Injection, USP is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis - e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial - e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.",
"Description": "Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2%, 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solutions is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3-. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O."
},
{
"NDCCode": "51754-5060-1",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 BOX (51754-5060-1) / 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "51754-5060-01",
"ProductNDC": "51754-5060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Betamethasone Sodium Phosphate And Betamethasone Acetate",
"NonProprietaryName": "Betamethasone Sodium Phosphate And Betamethasone Acetate",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; SOFT TISSUE",
"StartMarketingDate": "20210601",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA014602",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "BETAMETHASONE ACETATE; BETAMETHASONE SODIUM PHOSPHATE",
"StrengthNumber": "3; 3",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210601",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible, the intramuscular use of Betamethasone Sodium Phosphate and Betamethasone Acetate Injectable Suspension is indicated as follows:.",
"Description": "Betamethasone Sodium Phosphate and Betamethasone Acetate Injectable Suspension is a sterile aqueous suspension containing 3 mg per milliliter betamethasone (equivalent to 3.95 mg betamethasone sodium phosphate USP) and 3 mg per milliliter betamethasone acetate. Inactive ingredients per mL: 8.9 mg dibasic sodium phosphate dihydrate; 3.8 mg monobasic sodium phosphate dihydrate; 0.1 mg edetate disodium; and 0.2 mg benzalkonium chloride as preservative. The pH is between 6.8 and 7.2. The formula for betamethasone sodium phosphate is C22H28FNa2O8P and it has a molecular weight of 516.40. Chemically, it is 9-Fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 21-(disodium phosphate). The formula for betamethasone acetate is C24H31FO6 and it has a molecular weight of 434.50. Chemically, it is 9-Fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 21-acetate. The chemical structures for betamethasone sodium phosphate and betamethasone acetate are as follows. Betamethasone sodium phosphate is a white to practically white, odorless powder, and is hygroscopic. It is freely soluble in water and in methanol, but is practically insoluble in acetone and in chloroform. Betamethasone acetate is a white to creamy white, odorless powder that sinters and resolidifies at about 165°C, and remelts at about 200°C-220°C with decomposition. It is practically insoluble in water, but freely soluble in acetone, and is soluble in alcohol and in chloroform."
},
{
"NDCCode": "51754-6015-3",
"PackageDescription": "10 SYRINGE, PLASTIC in 1 CARTON (51754-6015-3) / 5 mL in 1 SYRINGE, PLASTIC",
"NDC11Code": "51754-6015-03",
"ProductNDC": "51754-6015",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glyrx-pf",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20200601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210997",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200601",
"SamplePackage": "N",
"IndicationAndUsage": "GLYRX®-PF is indicated. in anesthesia (all ages): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation,, 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias, and, 3 for protection against peripheral muscarinic effects of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing agents.",
"Description": "GLYRX®-PF is a synthetic anticholinergic agent. It is intended for intramuscular or intravenous administration. Each 1 mL of GLYRX®-PF contains 0.2 mg of glycopyrrolate, water for injection, sodium chloride as a tonicity agent, and hydrochloric acid or sodium hydroxide as pH adjusters. GLYRX®-PF is preservative free. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: (RS)-[3-(SR)-Hydroxy-1,1-dimethylpyrrolidinium bromide] α-cyclopentylmandelate. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Glycopyrrolate structural formula is as follows. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. GLYRX®-PF is a clear, colorless, sterile liquid with a pH of 2.0 – 3.0. The partition coefficient of Glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "51754-9995-5",
"PackageDescription": "20 VIAL in 1 CARTON (51754-9995-5) > 100 mL in 1 VIAL (51754-9995-1) ",
"NDC11Code": "51754-9995-05",
"ProductNDC": "51754-9995",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Acetate",
"NonProprietaryName": "Sodium Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220701",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "SODIUM ACETATE ANHYDROUS",
"StrengthNumber": "200",
"StrengthUnit": "meq/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20220701",
"SamplePackage": "N"
},
{
"NDCCode": "51754-0102-4",
"PackageDescription": "25 VIAL in 1 CARTON (51754-0102-4) / 10 mL in 1 VIAL",
"NDC11Code": "51754-0102-04",
"ProductNDC": "51754-0102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zinc Chloride",
"NonProprietaryName": "Zinc Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212007",
"LabelerName": "Exela Pharma Sciences,LLC",
"SubstanceName": "ZINC CHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210827",
"SamplePackage": "N",
"IndicationAndUsage": "Zinc Chloride Injection, USP, 1 mg/mL is indicated for use as a supplement to intravenous solutions given for TPN. Administration helps to maintain zinc serum levels and to prevent depletion of endogenous stores, and subsequent deficiency symptoms.",
"Description": "Zinc Chloride Injection, USP, 1 mg/mL is a sterile, nonpyrogenic solution intended for use as an additive to intravenous solutions for total parenteral nutrition (TPN). Each mL of solution contains 2.09 mg zinc chloride and 9 mg sodium chloride. The solution contains no bacteriostat, antimicrobial agent or added buffer. The pH is 2.0 (1.5 to 2.5); product may contain hydrochloric acid and sodium hydroxide for pH adjustment. The osmolarity is 0.354 mOsmoL/mL (calc.). Zinc Chloride, USP is chemically designated ZnCl2, a white crystalline compound freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The small amount of water vapor that can pass through the plastic container wall will not significantly alter the drug concentration."
},
{
"NDCCode": "51754-0103-3",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (51754-0103-3) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "51754-0103-03",
"ProductNDC": "51754-0103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cupric Chloride",
"NonProprietaryName": "Cupric Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212071",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "CUPRIC CHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2023-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Cupric Chloride Injection, USP 0.4 mg/mL is indicated for use as a supplement to intravenous solutions given for total parenteral nutrition (TPN). Administration helps to maintain copper serum levels and to prevent depletion of endogenous stores and subsequent deficiency symptoms.",
"Description": "Cupric Chloride Injection, USP 0.4 mg/mL is a sterile, nonpyrogenic solution intended for use as an additive to intravenous solutions for total parenteral nutrition (TPN). Each mL of solution contains 1.07 mg cupric chloride, dihydrate and 9 mg sodium chloride. The solution contains no bacteriostat, antimicrobial agent or added buffer. The pH is 2.0 (1.5 to 2.5); product may contain hydrochloric acid and sodium hydroxide for pH adjustment. The osmolarity is 0.327 mOsmol/mL (calc.). Cupric Chloride, USP is chemically designated cupric chloride, dihydrate (CuCl2 2H2O), a crystalline compound freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The vial is fabricated from cyclic olefin copolymer."
},
{
"NDCCode": "51754-0103-4",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (51754-0103-4) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "51754-0103-04",
"ProductNDC": "51754-0103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cupric Chloride",
"NonProprietaryName": "Cupric Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212071",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "CUPRIC CHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2023-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230201",
"SamplePackage": "N",
"IndicationAndUsage": "Cupric Chloride Injection, USP 0.4 mg/mL is indicated for use as a supplement to intravenous solutions given for total parenteral nutrition (TPN). Administration helps to maintain copper serum levels and to prevent depletion of endogenous stores and subsequent deficiency symptoms.",
"Description": "Cupric Chloride Injection, USP 0.4 mg/mL is a sterile, nonpyrogenic solution intended for use as an additive to intravenous solutions for total parenteral nutrition (TPN). Each mL of solution contains 1.07 mg cupric chloride, dihydrate and 9 mg sodium chloride. The solution contains no bacteriostat, antimicrobial agent or added buffer. The pH is 2.0 (1.5 to 2.5); product may contain hydrochloric acid and sodium hydroxide for pH adjustment. The osmolarity is 0.327 mOsmol/mL (calc.). Cupric Chloride, USP is chemically designated cupric chloride, dihydrate (CuCl2 2H2O), a crystalline compound freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The vial is fabricated from cyclic olefin copolymer."
},
{
"NDCCode": "51754-0104-7",
"PackageDescription": "4 VIAL in 1 CARTON (51754-0104-7) > 30 mL in 1 VIAL",
"NDC11Code": "51754-0104-07",
"ProductNDC": "51754-0104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetylcysteine",
"NonProprietaryName": "Acetylcysteine Injection",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210716",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204797",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "ACETYLCYSTEINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antidote [EPC], Antidote for Acetaminophen Overdose [EPC], Decreased Respiratory Secretion Viscosity [PE], Increased Glutathione Concentration [PE], Mucolytic [EPC], Reduction Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210716",
"SamplePackage": "N",
"IndicationAndUsage": "Acetylcysteine injection is indicated to prevent or lessen hepatic injury after ingestion of a potentially hepatotoxic quantity of acetaminophen in patients with acute ingestion or from repeated supratherapeutic ingestion (RSI).",
"Description": "Acetylcysteine injection is an intravenous antidote for the treatment of acetaminophen overdose. Acetylcysteine is the nonproprietary name for the N-acetyl derivative of the naturally occurring amino acid, L-cysteine (N-acetyl-L-cysteine). The compound is a white crystalline powder, which melts in the range of 104° to 110°C and has a very slight odor. The molecular formula of the compound is C5H9NO3S, and its molecular weight is 163.2. Acetylcysteine has the following structural formula:. Acetylcysteine injection is supplied as a sterile solution in vials containing 20% w/v (200 mg/mL) acetylcysteine. The pH of the solution ranges from 6.0 to 7.5. Acetylcysteine injection contains the following inactive ingredients: disodium edetate, sodium hydroxide (used for pH adjustment), and Sterile Water for Injection, USP."
},
{
"NDCCode": "51754-0105-8",
"PackageDescription": "3 VIAL in 1 CARTON (51754-0105-8) / 30 mL in 1 VIAL",
"NDC11Code": "51754-0105-08",
"ProductNDC": "51754-0105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetylcysteine",
"NonProprietaryName": "Acetylcysteine Solution",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL; RESPIRATORY (INHALATION)",
"StartMarketingDate": "20231113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205643",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "ACETYLCYSTEINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antidote [EPC], Antidote for Acetaminophen Overdose [EPC], Decreased Respiratory Secretion Viscosity [PE], Increased Glutathione Concentration [PE], Mucolytic [EPC], Reduction Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20231113",
"SamplePackage": "N",
"Description": "Acetylcysteine solution, USP is for inhalation (mucolytic agent) or oral administration (acetaminophen antidote), available as a sterile, unpreserved solution (NOT FOR INJECTION). The solution contains 20% (200 mg/mL) acetylcysteine, with disodium edetate in water for injection. The solution also contains sodium hydroxide and may contain hydrochloric acid to adjust pH (range 6.0 - 7.5). Acetylcysteine is the N-acetyl derivative of the naturally-occurring amino acid, L-cysteine. The compound is a white crystalline powder with the molecular formula C5H9NO3S, a molecular weight of 163.2, and chemical name of N-acetyl-L-cysteine. Acetylcysteine has the following structural formula. This product contains the following inactive ingredients: disodium edetate, sodium hydroxide and water for injection."
},
{
"NDCCode": "51754-0108-1",
"PackageDescription": "100 mL in 1 BAG (51754-0108-1) ",
"NDC11Code": "51754-0108-01",
"ProductNDC": "51754-0108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid In Sodium Chloride",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212020",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]",
"Status": "Active",
"LastUpdate": "2019-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190601",
"SamplePackage": "N",
"IndicationAndUsage": "Tranexamic Acid in Sodium Chloride Injection is indicated in patients with hemophilia for short-term use (two to eight days) to reduce the risk of hemorrhage during and following tooth extraction.",
"Description": "Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid is a white crystalline powder. The structural formula is. Tranexamic Acid in Sodium Chloride Injection is a clear to colorless sterile, nonpyrogenic injectable solution for intravenous administration. Each IV bag contains 1000 mg tranexamic acid, USP, 700 mg of sodium chloride, USP and Water for Injection, USP. The aqueous solution has a pH of 6.5 to 8.0."
},
{
"NDCCode": "51754-0108-3",
"PackageDescription": "1000 mL in 1 CASE (51754-0108-3) ",
"NDC11Code": "51754-0108-03",
"ProductNDC": "51754-0108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid In Sodium Chloride",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212020",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]",
"Status": "Active",
"LastUpdate": "2019-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190601",
"SamplePackage": "N",
"IndicationAndUsage": "Tranexamic Acid in Sodium Chloride Injection is indicated in patients with hemophilia for short-term use (two to eight days) to reduce the risk of hemorrhage during and following tooth extraction.",
"Description": "Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid is a white crystalline powder. The structural formula is. Tranexamic Acid in Sodium Chloride Injection is a clear to colorless sterile, nonpyrogenic injectable solution for intravenous administration. Each IV bag contains 1000 mg tranexamic acid, USP, 700 mg of sodium chloride, USP and Water for Injection, USP. The aqueous solution has a pH of 6.5 to 8.0."
},
{
"NDCCode": "51754-0203-4",
"PackageDescription": "25 VIAL in 1 CARTON (51754-0203-4) > 2 mL in 1 VIAL",
"NDC11Code": "51754-0203-04",
"ProductNDC": "51754-0203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160422",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018925",
"LabelerName": "EXELA PHARMA SCIENCES, LLC",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2021-09-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20161209",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil is indicated for the treatment of supraventricular tachyarrhythmias, including: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to Verapamil administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation, except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes).",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) and 10-mg (4 ml) vials. Each form contains Verapamil HCl 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of verapamil HCl is given below. Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "51754-0204-4",
"PackageDescription": "25 VIAL in 1 CARTON (51754-0204-4) > 2 mL in 1 VIAL",
"NDC11Code": "51754-0204-04",
"ProductNDC": "51754-0204",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Verapamil Hydrochloride",
"NonProprietaryName": "Verapamil Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018925",
"LabelerName": "EXELA PHARMA SCIENCES, LLC",
"SubstanceName": "VERAPAMIL HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2017-02-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170201",
"SamplePackage": "N",
"IndicationAndUsage": "Verapamil is indicated for the treatment of supraventricular tachyarrhythmias, including: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to Verapamil administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation, except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes).",
"Description": "Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) vials. Each vial contains Verapamil hydrochloride 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of Verapamil HCl is given below. Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4-dimethoxyα-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs."
},
{
"NDCCode": "51754-0500-1",
"PackageDescription": "1 VIAL in 1 CARTON (51754-0500-1) > 3 mL in 1 VIAL",
"NDC11Code": "51754-0500-01",
"ProductNDC": "51754-0500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Caffeine Citrate",
"NonProprietaryName": "Caffeine Citrate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077233",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "CAFFEINE CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]",
"Status": "Active",
"LastUpdate": "2020-01-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150330",
"SamplePackage": "N",
"IndicationAndUsage": "Caffeine citrate injection and caffeine citrate oral solution are indicated for the short term treatment of apnea of prematurity in infants between 28 and <33 weeks gestational age.",
"Description": "Both caffeine citrate injection for intravenous administration and caffeine citrate oral solution are clear, colorless, sterile, non-pyrogenic, preservative-free, aqueous solutions adjusted to pH 4.7. Each mL contains 20 mg caffeine citrate (equivalent to 10 mg of caffeine base) prepared in solution by the addition of 10 mg caffeine anhydrous to 5.0 mg citric acid monohydrate, 8.3 mg sodium citrate dihydrate and Water for Injection. Caffeine, a central nervous system stimulant, is an odorless white crystalline powder or granule, with a bitter taste. It is sparingly soluble in water and ethanol at room temperature. The chemical name of caffeine is 3,7-dihydro-1,3,7-trimethyl-1H-purine-2,6-dione. In the presence of citric acid it forms caffeine citrate salt in solution. The structural formula and molecular weight of caffeine citrate follows."
},
{
"NDCCode": "51754-0501-3",
"PackageDescription": "10 VIAL in 1 CARTON (51754-0501-3) > 3 mL in 1 VIAL",
"NDC11Code": "51754-0501-03",
"ProductNDC": "51754-0501",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Caffeine Citrate",
"NonProprietaryName": "Caffeine Citrate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20060921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077304",
"LabelerName": "Exela Pharma Sciences, LLC",
"SubstanceName": "CAFFEINE CITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]",
"Status": "Active",
"LastUpdate": "2020-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150330",
"SamplePackage": "N",
"IndicationAndUsage": "Caffeine citrate injection and caffeine citrate oral solution are indicated for the short term treatment of apnea of prematurity in infants between 28 and <33 weeks gestational age.",
"Description": "Both caffeine citrate injection for intravenous administration and caffeine citrate oral solution are clear, colorless, sterile, non-pyrogenic, preservative-free, aqueous solutions adjusted to pH 4.7. Each mL contains 20 mg caffeine citrate (equivalent to 10 mg of caffeine base) prepared in solution by the addition of 10 mg caffeine anhydrous to 5.0 mg citric acid monohydrate, 8.3 mg sodium citrate dihydrate and Water for Injection. Caffeine, a central nervous system stimulant, is an odorless white crystalline powder or granule, with a bitter taste. It is sparingly soluble in water and ethanol at room temperature. The chemical name of caffeine is 3,7-dihydro-1,3,7- trimethyl-1H-purine-2,6-dione. In the presence of citric acid it forms caffeine citrate salt in solution. The structural formula and molecular weight of caffeine citrate follows."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>51754-5002-5</NDCCode>
<PackageDescription>20 VIAL in 1 CARTON (51754-5002-5) > 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-5002-05</NDC11Code>
<ProductNDC>51754-5002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211091</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Alkalinizing Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Bicarbonate Injection, USP is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis - e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial - e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.</IndicationAndUsage>
<Description>Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2%, 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solutions is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3-. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O.</Description>
</NDC>
<NDC>
<NDCCode>0220-5002-41</NDCCode>
<PackageDescription>5 [hp_C] in 1 TUBE (0220-5002-41) </PackageDescription>
<NDC11Code>00220-5002-41</NDC11Code>
<ProductNDC>0220-5002</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Thuja Occidentalis</ProprietaryName>
<NonProprietaryName>Thuja Occidentalis Leafy Twig</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19830303</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Boiron</LabelerName>
<SubstanceName>THUJA OCCIDENTALIS LEAFY TWIG</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>[hp_C]/5[hp_C]</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-11-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19830303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Relieves warts *. Uses: See symptoms on front panel.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>22840-5002-5</NDCCode>
<PackageDescription>5 mL in 1 BOTTLE, DROPPER (22840-5002-5) </PackageDescription>
<NDC11Code>22840-5002-05</NDC11Code>
<ProductNDC>22840-5002</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Fire Ant</ProprietaryName>
<NonProprietaryName>Solenopsis Richteri</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>SOLENOPSIS RICHTERI</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Ant Venoms [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Insect Proteins [CS], Non-Standardized Insect Venom Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>46145-5002-5</NDCCode>
<PackageDescription>1003.025 L in 1 CONTAINER (46145-5002-5) </PackageDescription>
<NDC11Code>46145-5002-05</NDC11Code>
<ProductNDC>46145-5002</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer U</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>CFB Michigan Inc</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63240-5002-2</NDCCode>
<PackageDescription>1 JAR in 1 BOX (63240-5002-2) > 67.5 g in 1 JAR (63240-5002-1) </PackageDescription>
<NDC11Code>63240-5002-02</NDC11Code>
<ProductNDC>63240-5002</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Shunga</ProprietaryName>
<ProprietaryNameSuffix>Sensation Balm</ProprietaryNameSuffix>
<NonProprietaryName>Benzocain</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20000101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Eau Zone Oils and Fragrances LTD</LabelerName>
<SubstanceName>BENZOCAINE</SubstanceName>
<StrengthNumber>5.07</StrengthNumber>
<StrengthUnit>g/67.5g</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Directions ■ Apply a small amount ( 1 to 3 cc ) to head and shaft of penis before intercourse, or as directed by a doctor. ■ Wipe off excedent before relation.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65044-5002-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-5002-1) </PackageDescription>
<NDC11Code>65044-5002-01</NDC11Code>
<ProductNDC>65044-5002</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Molds - Mold Mix 4</ProprietaryName>
<NonProprietaryName>Molds - Mold Mix 4</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS</RouteName>
<StartMarketingDate>19410419</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103888</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>ALTERNARIA ALTERNATA; ASPERGILLUS FUMIGATUS; ASPERGILLUS NIDULANS; ASPERGILLUS NIGER VAR. NIGER; ASPERGILLUS TERREUS; CLADOSPORIUM CLADOSPORIOIDES; PENICILLIUM DIGITATUM; PENICILLIUM EXPANSUM; PENICILLIUM CHRYSOGENUM VAR. CHRYSOGENUM; CLONOSTACHYS ROSEA F. ROSEA</SubstanceName>
<StrengthNumber>.1; .025; .025; .025; .025; .1; .025; .05; .025; .025</StrengthNumber>
<StrengthUnit>g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL; g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Allergens [CS], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Cell-mediated Immunity [PE], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Fungal Proteins [CS], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Increased IgG Production [PE], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC], Non-Standardized Fungal Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19410419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.</IndicationAndUsage>
<Description>Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas.</Description>
</NDC>
<NDC>
<NDCCode>83035-5002-5</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (83035-5002-5) / 150 mL in 1 TUBE</PackageDescription>
<NDC11Code>83035-5002-05</NDC11Code>
<ProductNDC>83035-5002</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lintera Wash</ProprietaryName>
<NonProprietaryName>Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230801</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M006</ApplicationNumber>
<LabelerName>Singular Dreamer dba True Marker</LabelerName>
<SubstanceName>BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of acne.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>83103-5002-1</NDCCode>
<PackageDescription>1 TUBE in 1 PACKAGE (83103-5002-1) / 3.5 g in 1 TUBE</PackageDescription>
<NDC11Code>83103-5002-01</NDC11Code>
<ProductNDC>83103-5002</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ciele Lip And Protect Lipstick Spf 60 Kelly</ProprietaryName>
<NonProprietaryName>Ciele Lip And Protect Lipstick Spf 60 Kelly</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20260507</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>L�E COSMETICS INC</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260507</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>● helps prevent sunburn ● if used as directed with other sun protection meausres (see directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51754-0203-2</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (51754-0203-2) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-0203-02</NDC11Code>
<ProductNDC>51754-0203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160422</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018925</ApplicationNumber>
<LabelerName>EXELA PHARMA SCIENCES, LLC</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil is indicated for the treatment of supraventricular tachyarrhythmias, including: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to Verapamil administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation, except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes).</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) and 10-mg (4 ml) vials. Each form contains Verapamil HCl 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of verapamil HCl is given below. Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>51754-0204-2</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (51754-0204-2) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-0204-02</NDC11Code>
<ProductNDC>51754-0204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018925</ApplicationNumber>
<LabelerName>EXELA PHARMA SCIENCES, LLC</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2017-02-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil is indicated for the treatment of supraventricular tachyarrhythmias, including: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to Verapamil administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation, except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes).</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) vials. Each vial contains Verapamil hydrochloride 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of Verapamil HCl is given below. Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4-dimethoxyα-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>51754-0205-2</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (51754-0205-2) > 4 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-0205-02</NDC11Code>
<ProductNDC>51754-0205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180611</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018925</ApplicationNumber>
<LabelerName>EXELA PHARMA SCIENCES, LLC</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil is indicated for the treatment of supraventricular tachyarrhythmias, including: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to Verapamil administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation, except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes).</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) and 10-mg (4 ml) vials. Each form contains Verapamil HCl 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of verapamil HCl is given below. Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>51754-0501-2</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (51754-0501-2) > 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-0501-02</NDC11Code>
<ProductNDC>51754-0501</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Caffeine Citrate</ProprietaryName>
<NonProprietaryName>Caffeine Citrate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077304</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>CAFFEINE CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190831</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Caffeine citrate injection and caffeine citrate oral solution are indicated for the short term treatment of apnea of prematurity in infants between 28 and <33 weeks gestational age.</IndicationAndUsage>
<Description>Both caffeine citrate injection for intravenous administration and caffeine citrate oral solution are clear, colorless, sterile, non-pyrogenic, preservative-free, aqueous solutions adjusted to pH 4.7. Each mL contains 20 mg caffeine citrate (equivalent to 10 mg of caffeine base) prepared in solution by the addition of 10 mg caffeine anhydrous to 5.0 mg citric acid monohydrate, 8.3 mg sodium citrate dihydrate and Water for Injection. Caffeine, a central nervous system stimulant, is an odorless white crystalline powder or granule, with a bitter taste. It is sparingly soluble in water and ethanol at room temperature. The chemical name of caffeine is 3,7-dihydro-1,3,7- trimethyl-1H-purine-2,6-dione. In the presence of citric acid it forms caffeine citrate salt in solution. The structural formula and molecular weight of caffeine citrate follows.</Description>
</NDC>
<NDC>
<NDCCode>51754-1200-3</NDCCode>
<PackageDescription>10 SYRINGE, PLASTIC in 1 CARTON (51754-1200-3) / 5 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>51754-1200-03</NDC11Code>
<ProductNDC>51754-1200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bloxiverz</ProprietaryName>
<NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20231106</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204078</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231231</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BLOXIVERZ, is a cholinesterase inhibitor, indicated for the reversal of the effects of non-depolarizing neuromuscular blocking agents after surgery.</IndicationAndUsage>
<Description>Neostigmine methylsulfate, a cholinesterase inhibitor, is (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. The structural formula is. Neostigmine methylsulfate is a white crystalline powder and is very soluble in water and soluble in alcohol. BLOXIVERZ is a sterile, nonpyrogenic solution intended for intravenous use. Each mL of the 0.5 mg/mL strength contains neostigmine methylsulfate 0.5 mg, phenol 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 1 mg/mL strength contains neostigmine methylsulfate 1 mg, phenol 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 5 mL single-dose prefilled syringe contains 1 mg neostigmine methylsulfate, USP, 90 mg sodium chloride, USP and 1 mg sodium acetate trihydrate, USP in water for injection. May contain sodium hydroxide, NF and/or glacial acetic acid, USP as needed for pH adjustment to achieve a value of 5.5.</Description>
</NDC>
<NDC>
<NDCCode>51754-4000-3</NDCCode>
<PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (51754-4000-3) > 5 mL in 1 VIAL, PHARMACY BULK PACKAGE</PackageDescription>
<NDC11Code>51754-4000-03</NDC11Code>
<ProductNDC>51754-4000</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vazculep</ProprietaryName>
<NonProprietaryName>Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210326</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204300</ApplicationNumber>
<LabelerName>Exela Phrama Sciences, LLC</LabelerName>
<SubstanceName>PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VAZCULEP is indicated for the treatment of clinically important hypotension resulting primarily from vasodilation in the setting of anesthesia.</IndicationAndUsage>
<Description>Phenylephrine is an α-1 adrenergic receptor agonist. VAZCULEP (phenylephrine hydrochloride) Injection, 10 mg/mL, is a clear, colorless, sterile, nonpyrogenic solution for intravenous use. It must be diluted before administration as an intravenous bolus or continuous intravenous infusion. The chemical name of phenylephrine hydrochloride is (-)-m-hydroxy-α-[(methylamino)methyl]benzyl alcohol hydrochloride and is chemically designated as C9H14ClNO2 with a molecular weight of 203.66 g/mol. Its structural formula is depicted below. Phenylephrine hydrochloride is soluble in water and ethanol, and insoluble in chloroform and ethyl ether. VAZCULEP (phenylephrine hydrochloride) Injection, 10 mg/mL, is sensitive to light. Each mL contains: phenylephrine hydrochloride 10 mg, sodium chloride 3.5 mg, sodium citrate dihydrate 4 mg, citric acid monohydrate 1 mg, and sodium metabisulfite 2 mg in water for injection. The pH is adjusted with sodium hydroxide and/or hydrochloric acid if necessary. The pH range is 3.5 to 5.5.</Description>
</NDC>
<NDC>
<NDCCode>51754-4250-3</NDCCode>
<PackageDescription>10 SYRINGE, PLASTIC in 1 CARTON (51754-4250-3) > 5 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>51754-4250-03</NDC11Code>
<ProductNDC>51754-4250</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Akovaz</ProprietaryName>
<NonProprietaryName>Ephedrine Sulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210510</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208289</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>EPHEDRINE SULFATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Increased Norepinephrine Activity [PE], Norepinephrine Releasing Agent [EPC], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>AKOVAZ (ephedrine sulfate injection) is indicated for the treatment of clinically important hypotension occurring in the setting of anesthesia.</IndicationAndUsage>
<Description>Ephedrine is an alpha- and beta-adrenergic agonist and a norepinephrine-releasing agent. AKOVAZ (ephedrine sulfate injection) is a clear, colorless, sterile solution for intravenous injection. The chemical name of ephedrine sulfate is benzenemethanol, α-[1-(methylamino)ethyl]-, [R-(R*,S*)]-, sulfate (2:1) (salt), and the molecular weight is 428.5 g/mol. Its structural formula is depicted below:. Ephedrine sulfate is freely soluble in water and ethanol, very slightly soluble in chloroform, and practically insoluble in ether. Each mL of the 50 mg/mL strength contains ephedrine sulfate 50 mg (equivalent to 38 mg ephedrine base) in water for injection. The pH is adjusted with sodium hydroxide and/or glacial acetic acid if necessary. The pH range is 4.5 to 7.0. The 50 mg/mL vial must be diluted before intravenous administration. Each mL of the 5 mL single-dose prefilled syringe contains 5 mg (equivalent to 3.8 mg ephedrine base) and 9 mg Sodium Chloride, USP in Water for Injection. The pH range is 4.5 to 6.5.</Description>
</NDC>
<NDC>
<NDCCode>51754-5001-5</NDCCode>
<PackageDescription>20 VIAL in 1 CARTON (51754-5001-5) > 50 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-5001-05</NDC11Code>
<ProductNDC>51754-5001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Bicarbonate</ProprietaryName>
<NonProprietaryName>Sodium Bicarbonate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211091</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>SODIUM BICARBONATE</SubstanceName>
<StrengthNumber>84</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Alkalinizing Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Bicarbonate Injection, USP is indicated in the treatment of metabolic acidosis which may occur in severe renal disease, uncontrolled diabetes, circulatory insufficiency due to shock or severe dehydration, extracorporeal circulation of blood, cardiac arrest and severe primary lactic acidosis. Sodium bicarbonate is further indicated in the treatment of certain drug intoxications, including barbiturates (where dissociation of the barbiturate-protein complex is desired), in poisoning by salicylates or methyl alcohol and in hemolytic reactions requiring alkalinization of the urine to diminish nephrotoxicity of hemoglobin and its breakdown products. Sodium bicarbonate also is indicated in severe diarrhea which is often accompanied by a significant loss of bicarbonate. Treatment of metabolic acidosis should, if possible, be superimposed on measures designed to control the basic cause of the acidosis - e.g., insulin in uncomplicated diabetes, blood volume restoration in shock. But since an appreciable time interval may elapse before all of the ancillary effects are brought about, bicarbonate therapy is indicated to minimize risks inherent to the acidosis itself. Vigorous bicarbonate therapy is required in any form of metabolic acidosis where a rapid increase in plasma total CO2 content is crucial - e.g., cardiac arrest, circulatory insufficiency due to shock or severe dehydration, and in severe primary lactic acidosis or severe diabetic acidosis.</IndicationAndUsage>
<Description>Sodium Bicarbonate Injection, USP is a sterile, nonpyrogenic, hypertonic solution of sodium bicarbonate (NaHCO3) in water for injection for administration by the intravenous route as an electrolyte replenisher and systemic alkalizer. Solutions are offered in concentrations of 4.2%, 7.5% and 8.4%. See table in HOW SUPPLIED section for contents and characteristics. The solutions contain no bacteriostat, antimicrobial agent or added buffer and are intended only for use as a single-dose injection, the approximate pH of the solutions is 8. When smaller doses are required, the unused portion should be discarded. Sodium bicarbonate, 84 mg is equal to one milliequivalent each of Na+ and HCO3-. Sodium Bicarbonate, USP is chemically designated NaHCO3, a white crystalline powder soluble in water. Water for Injection, USP is chemically designated H2O.</Description>
</NDC>
<NDC>
<NDCCode>51754-5060-1</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 BOX (51754-5060-1) / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>51754-5060-01</NDC11Code>
<ProductNDC>51754-5060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Betamethasone Sodium Phosphate And Betamethasone Acetate</ProprietaryName>
<NonProprietaryName>Betamethasone Sodium Phosphate And Betamethasone Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; SOFT TISSUE</RouteName>
<StartMarketingDate>20210601</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA014602</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>BETAMETHASONE ACETATE; BETAMETHASONE SODIUM PHOSPHATE</SubstanceName>
<StrengthNumber>3; 3</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible, the intramuscular use of Betamethasone Sodium Phosphate and Betamethasone Acetate Injectable Suspension is indicated as follows:.</IndicationAndUsage>
<Description>Betamethasone Sodium Phosphate and Betamethasone Acetate Injectable Suspension is a sterile aqueous suspension containing 3 mg per milliliter betamethasone (equivalent to 3.95 mg betamethasone sodium phosphate USP) and 3 mg per milliliter betamethasone acetate. Inactive ingredients per mL: 8.9 mg dibasic sodium phosphate dihydrate; 3.8 mg monobasic sodium phosphate dihydrate; 0.1 mg edetate disodium; and 0.2 mg benzalkonium chloride as preservative. The pH is between 6.8 and 7.2. The formula for betamethasone sodium phosphate is C22H28FNa2O8P and it has a molecular weight of 516.40. Chemically, it is 9-Fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 21-(disodium phosphate). The formula for betamethasone acetate is C24H31FO6 and it has a molecular weight of 434.50. Chemically, it is 9-Fluoro-11β,17,21-trihydroxy-16β-methylpregna-1,4-diene-3,20-dione 21-acetate. The chemical structures for betamethasone sodium phosphate and betamethasone acetate are as follows. Betamethasone sodium phosphate is a white to practically white, odorless powder, and is hygroscopic. It is freely soluble in water and in methanol, but is practically insoluble in acetone and in chloroform. Betamethasone acetate is a white to creamy white, odorless powder that sinters and resolidifies at about 165°C, and remelts at about 200°C-220°C with decomposition. It is practically insoluble in water, but freely soluble in acetone, and is soluble in alcohol and in chloroform.</Description>
</NDC>
<NDC>
<NDCCode>51754-6015-3</NDCCode>
<PackageDescription>10 SYRINGE, PLASTIC in 1 CARTON (51754-6015-3) / 5 mL in 1 SYRINGE, PLASTIC</PackageDescription>
<NDC11Code>51754-6015-03</NDC11Code>
<ProductNDC>51754-6015</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glyrx-pf</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20200601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210997</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>GLYRX®-PF is indicated. in anesthesia (all ages): 1 for reduction of salivary, tracheobronchial, and pharyngeal secretions, reduction of volume and acidity of gastric secretions, and blockade of cardiac inhibitory reflexes during induction of anesthesia and intubation,, 2 intraoperatively to counteract surgically or drug-induced or vagal reflex-associated arrhythmias, and, 3 for protection against peripheral muscarinic effects of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing agents.</IndicationAndUsage>
<Description>GLYRX®-PF is a synthetic anticholinergic agent. It is intended for intramuscular or intravenous administration. Each 1 mL of GLYRX®-PF contains 0.2 mg of glycopyrrolate, water for injection, sodium chloride as a tonicity agent, and hydrochloric acid or sodium hydroxide as pH adjusters. GLYRX®-PF is preservative free. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: (RS)-[3-(SR)-Hydroxy-1,1-dimethylpyrrolidinium bromide] α-cyclopentylmandelate. The molecular formula is C19H28BrNO3 and the molecular weight is 398.34. Glycopyrrolate structural formula is as follows. Glycopyrrolate occurs as a white, odorless, crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. It is completely ionized at physiological pH values. GLYRX®-PF is a clear, colorless, sterile liquid with a pH of 2.0 – 3.0. The partition coefficient of Glycopyrrolate in n-octanol/water system is 0.304 (log10 P = -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>51754-9995-5</NDCCode>
<PackageDescription>20 VIAL in 1 CARTON (51754-9995-5) > 100 mL in 1 VIAL (51754-9995-1) </PackageDescription>
<NDC11Code>51754-9995-05</NDC11Code>
<ProductNDC>51754-9995</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Acetate</ProprietaryName>
<NonProprietaryName>Sodium Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220701</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>SODIUM ACETATE ANHYDROUS</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>meq/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51754-0102-4</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (51754-0102-4) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-0102-04</NDC11Code>
<ProductNDC>51754-0102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zinc Chloride</ProprietaryName>
<NonProprietaryName>Zinc Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212007</ApplicationNumber>
<LabelerName>Exela Pharma Sciences,LLC</LabelerName>
<SubstanceName>ZINC CHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Zinc Chloride Injection, USP, 1 mg/mL is indicated for use as a supplement to intravenous solutions given for TPN. Administration helps to maintain zinc serum levels and to prevent depletion of endogenous stores, and subsequent deficiency symptoms.</IndicationAndUsage>
<Description>Zinc Chloride Injection, USP, 1 mg/mL is a sterile, nonpyrogenic solution intended for use as an additive to intravenous solutions for total parenteral nutrition (TPN). Each mL of solution contains 2.09 mg zinc chloride and 9 mg sodium chloride. The solution contains no bacteriostat, antimicrobial agent or added buffer. The pH is 2.0 (1.5 to 2.5); product may contain hydrochloric acid and sodium hydroxide for pH adjustment. The osmolarity is 0.354 mOsmoL/mL (calc.). Zinc Chloride, USP is chemically designated ZnCl2, a white crystalline compound freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The small amount of water vapor that can pass through the plastic container wall will not significantly alter the drug concentration.</Description>
</NDC>
<NDC>
<NDCCode>51754-0103-3</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (51754-0103-3) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>51754-0103-03</NDC11Code>
<ProductNDC>51754-0103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cupric Chloride</ProprietaryName>
<NonProprietaryName>Cupric Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212071</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>CUPRIC CHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cupric Chloride Injection, USP 0.4 mg/mL is indicated for use as a supplement to intravenous solutions given for total parenteral nutrition (TPN). Administration helps to maintain copper serum levels and to prevent depletion of endogenous stores and subsequent deficiency symptoms.</IndicationAndUsage>
<Description>Cupric Chloride Injection, USP 0.4 mg/mL is a sterile, nonpyrogenic solution intended for use as an additive to intravenous solutions for total parenteral nutrition (TPN). Each mL of solution contains 1.07 mg cupric chloride, dihydrate and 9 mg sodium chloride. The solution contains no bacteriostat, antimicrobial agent or added buffer. The pH is 2.0 (1.5 to 2.5); product may contain hydrochloric acid and sodium hydroxide for pH adjustment. The osmolarity is 0.327 mOsmol/mL (calc.). Cupric Chloride, USP is chemically designated cupric chloride, dihydrate (CuCl2 2H2O), a crystalline compound freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The vial is fabricated from cyclic olefin copolymer.</Description>
</NDC>
<NDC>
<NDCCode>51754-0103-4</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (51754-0103-4) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>51754-0103-04</NDC11Code>
<ProductNDC>51754-0103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cupric Chloride</ProprietaryName>
<NonProprietaryName>Cupric Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212071</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>CUPRIC CHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cupric Chloride Injection, USP 0.4 mg/mL is indicated for use as a supplement to intravenous solutions given for total parenteral nutrition (TPN). Administration helps to maintain copper serum levels and to prevent depletion of endogenous stores and subsequent deficiency symptoms.</IndicationAndUsage>
<Description>Cupric Chloride Injection, USP 0.4 mg/mL is a sterile, nonpyrogenic solution intended for use as an additive to intravenous solutions for total parenteral nutrition (TPN). Each mL of solution contains 1.07 mg cupric chloride, dihydrate and 9 mg sodium chloride. The solution contains no bacteriostat, antimicrobial agent or added buffer. The pH is 2.0 (1.5 to 2.5); product may contain hydrochloric acid and sodium hydroxide for pH adjustment. The osmolarity is 0.327 mOsmol/mL (calc.). Cupric Chloride, USP is chemically designated cupric chloride, dihydrate (CuCl2 2H2O), a crystalline compound freely soluble in water. Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The vial is fabricated from cyclic olefin copolymer.</Description>
</NDC>
<NDC>
<NDCCode>51754-0104-7</NDCCode>
<PackageDescription>4 VIAL in 1 CARTON (51754-0104-7) > 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-0104-07</NDC11Code>
<ProductNDC>51754-0104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetylcysteine</ProprietaryName>
<NonProprietaryName>Acetylcysteine Injection</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210716</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204797</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>ACETYLCYSTEINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antidote [EPC], Antidote for Acetaminophen Overdose [EPC], Decreased Respiratory Secretion Viscosity [PE], Increased Glutathione Concentration [PE], Mucolytic [EPC], Reduction Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetylcysteine injection is indicated to prevent or lessen hepatic injury after ingestion of a potentially hepatotoxic quantity of acetaminophen in patients with acute ingestion or from repeated supratherapeutic ingestion (RSI).</IndicationAndUsage>
<Description>Acetylcysteine injection is an intravenous antidote for the treatment of acetaminophen overdose. Acetylcysteine is the nonproprietary name for the N-acetyl derivative of the naturally occurring amino acid, L-cysteine (N-acetyl-L-cysteine). The compound is a white crystalline powder, which melts in the range of 104° to 110°C and has a very slight odor. The molecular formula of the compound is C5H9NO3S, and its molecular weight is 163.2. Acetylcysteine has the following structural formula:. Acetylcysteine injection is supplied as a sterile solution in vials containing 20% w/v (200 mg/mL) acetylcysteine. The pH of the solution ranges from 6.0 to 7.5. Acetylcysteine injection contains the following inactive ingredients: disodium edetate, sodium hydroxide (used for pH adjustment), and Sterile Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>51754-0105-8</NDCCode>
<PackageDescription>3 VIAL in 1 CARTON (51754-0105-8) / 30 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-0105-08</NDC11Code>
<ProductNDC>51754-0105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetylcysteine</ProprietaryName>
<NonProprietaryName>Acetylcysteine Solution</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL; RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20231113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205643</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>ACETYLCYSTEINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antidote [EPC], Antidote for Acetaminophen Overdose [EPC], Decreased Respiratory Secretion Viscosity [PE], Increased Glutathione Concentration [PE], Mucolytic [EPC], Reduction Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231113</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Acetylcysteine solution, USP is for inhalation (mucolytic agent) or oral administration (acetaminophen antidote), available as a sterile, unpreserved solution (NOT FOR INJECTION). The solution contains 20% (200 mg/mL) acetylcysteine, with disodium edetate in water for injection. The solution also contains sodium hydroxide and may contain hydrochloric acid to adjust pH (range 6.0 - 7.5). Acetylcysteine is the N-acetyl derivative of the naturally-occurring amino acid, L-cysteine. The compound is a white crystalline powder with the molecular formula C5H9NO3S, a molecular weight of 163.2, and chemical name of N-acetyl-L-cysteine. Acetylcysteine has the following structural formula. This product contains the following inactive ingredients: disodium edetate, sodium hydroxide and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>51754-0108-1</NDCCode>
<PackageDescription>100 mL in 1 BAG (51754-0108-1) </PackageDescription>
<NDC11Code>51754-0108-01</NDC11Code>
<ProductNDC>51754-0108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212020</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tranexamic Acid in Sodium Chloride Injection is indicated in patients with hemophilia for short-term use (two to eight days) to reduce the risk of hemorrhage during and following tooth extraction.</IndicationAndUsage>
<Description>Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid is a white crystalline powder. The structural formula is. Tranexamic Acid in Sodium Chloride Injection is a clear to colorless sterile, nonpyrogenic injectable solution for intravenous administration. Each IV bag contains 1000 mg tranexamic acid, USP, 700 mg of sodium chloride, USP and Water for Injection, USP. The aqueous solution has a pH of 6.5 to 8.0.</Description>
</NDC>
<NDC>
<NDCCode>51754-0108-3</NDCCode>
<PackageDescription>1000 mL in 1 CASE (51754-0108-3) </PackageDescription>
<NDC11Code>51754-0108-03</NDC11Code>
<ProductNDC>51754-0108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212020</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC], Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tranexamic Acid in Sodium Chloride Injection is indicated in patients with hemophilia for short-term use (two to eight days) to reduce the risk of hemorrhage during and following tooth extraction.</IndicationAndUsage>
<Description>Tranexamic acid is trans-4-(aminomethyl)cyclohexanecarboxylic acid, an antifibrinolytic agent. Tranexamic acid is a white crystalline powder. The structural formula is. Tranexamic Acid in Sodium Chloride Injection is a clear to colorless sterile, nonpyrogenic injectable solution for intravenous administration. Each IV bag contains 1000 mg tranexamic acid, USP, 700 mg of sodium chloride, USP and Water for Injection, USP. The aqueous solution has a pH of 6.5 to 8.0.</Description>
</NDC>
<NDC>
<NDCCode>51754-0203-4</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (51754-0203-4) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-0203-04</NDC11Code>
<ProductNDC>51754-0203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160422</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018925</ApplicationNumber>
<LabelerName>EXELA PHARMA SCIENCES, LLC</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-09-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil is indicated for the treatment of supraventricular tachyarrhythmias, including: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to Verapamil administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation, except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes).</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) and 10-mg (4 ml) vials. Each form contains Verapamil HCl 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of verapamil HCl is given below. Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl] methylamino]propyl]-3,4-dimethoxy-α-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>51754-0204-4</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (51754-0204-4) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-0204-04</NDC11Code>
<ProductNDC>51754-0204</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Verapamil Hydrochloride</ProprietaryName>
<NonProprietaryName>Verapamil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018925</ApplicationNumber>
<LabelerName>EXELA PHARMA SCIENCES, LLC</LabelerName>
<SubstanceName>VERAPAMIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2017-02-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Verapamil is indicated for the treatment of supraventricular tachyarrhythmias, including: 1 Rapid conversion to sinus rhythm of paroxysmal supraventricular tachycardias, including those associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes). When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver) should be attempted prior to Verapamil administration., 2 Temporary control of rapid ventricular rate in atrial flutter or atrial fibrillation, except when the atrial flutter and/or atrial fibrillation are associated with accessory bypass tracts (Wolff-Parkinson-White [WPW] and Lown-Ganong-Levine [LGL] syndromes).</IndicationAndUsage>
<Description>Verapamil hydrochloride is a calcium antagonist or slow-channel inhibitor available as a sterile solution for intravenous injection in 5-mg (2 ml) vials. Each vial contains Verapamil hydrochloride 2.5 mg/ml and sodium chloride 8.5 mg/ml in water for injection. Hydrochloric acid and/or sodium hydroxide is used for pH adjustment. The pH of the solution is between 4.1 and 6.0. The structural formula of Verapamil HCl is given below. Benzeneacetonitrile, α-[3-[[2-(3,4-dimethoxyphenyl)ethyl]methylamino]propyl]-3,4-dimethoxyα-(1-methylethyl) hydrochloride. Verapamil hydrochloride is an almost white, crystalline powder, practically free of odor, with a bitter taste. It is soluble in water, chloroform, and methanol. Verapamil hydrochloride is not chemically related to other antiarrhythmic drugs.</Description>
</NDC>
<NDC>
<NDCCode>51754-0500-1</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (51754-0500-1) > 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-0500-01</NDC11Code>
<ProductNDC>51754-0500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Caffeine Citrate</ProprietaryName>
<NonProprietaryName>Caffeine Citrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077233</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>CAFFEINE CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-01-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Caffeine citrate injection and caffeine citrate oral solution are indicated for the short term treatment of apnea of prematurity in infants between 28 and <33 weeks gestational age.</IndicationAndUsage>
<Description>Both caffeine citrate injection for intravenous administration and caffeine citrate oral solution are clear, colorless, sterile, non-pyrogenic, preservative-free, aqueous solutions adjusted to pH 4.7. Each mL contains 20 mg caffeine citrate (equivalent to 10 mg of caffeine base) prepared in solution by the addition of 10 mg caffeine anhydrous to 5.0 mg citric acid monohydrate, 8.3 mg sodium citrate dihydrate and Water for Injection. Caffeine, a central nervous system stimulant, is an odorless white crystalline powder or granule, with a bitter taste. It is sparingly soluble in water and ethanol at room temperature. The chemical name of caffeine is 3,7-dihydro-1,3,7-trimethyl-1H-purine-2,6-dione. In the presence of citric acid it forms caffeine citrate salt in solution. The structural formula and molecular weight of caffeine citrate follows.</Description>
</NDC>
<NDC>
<NDCCode>51754-0501-3</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (51754-0501-3) > 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>51754-0501-03</NDC11Code>
<ProductNDC>51754-0501</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Caffeine Citrate</ProprietaryName>
<NonProprietaryName>Caffeine Citrate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077304</ApplicationNumber>
<LabelerName>Exela Pharma Sciences, LLC</LabelerName>
<SubstanceName>CAFFEINE CITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Caffeine citrate injection and caffeine citrate oral solution are indicated for the short term treatment of apnea of prematurity in infants between 28 and <33 weeks gestational age.</IndicationAndUsage>
<Description>Both caffeine citrate injection for intravenous administration and caffeine citrate oral solution are clear, colorless, sterile, non-pyrogenic, preservative-free, aqueous solutions adjusted to pH 4.7. Each mL contains 20 mg caffeine citrate (equivalent to 10 mg of caffeine base) prepared in solution by the addition of 10 mg caffeine anhydrous to 5.0 mg citric acid monohydrate, 8.3 mg sodium citrate dihydrate and Water for Injection. Caffeine, a central nervous system stimulant, is an odorless white crystalline powder or granule, with a bitter taste. It is sparingly soluble in water and ethanol at room temperature. The chemical name of caffeine is 3,7-dihydro-1,3,7- trimethyl-1H-purine-2,6-dione. In the presence of citric acid it forms caffeine citrate salt in solution. The structural formula and molecular weight of caffeine citrate follows.</Description>
</NDC>
</NDCList>