RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>52389-155-02</NDCCode>
    <PackageDescription>2 BOTTLE, PLASTIC in 1 PACKAGE (52389-155-02)  / 80 TABLET, FILM COATED in 1 BOTTLE, PLASTIC</PackageDescription>
    <NDC11Code>52389-0155-02</NDC11Code>
    <ProductNDC>52389-155</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Diurex</ProprietaryName>
    <ProprietaryNameSuffix>Ultra</ProprietaryNameSuffix>
    <NonProprietaryName>Caffeine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050901</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M027</ApplicationNumber>
    <LabelerName>Kobayashi Healthcare International, Inc.</LabelerName>
    <SubstanceName>CAFFEINE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240104</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the relief of: : 1 temporary water retention, 2 bloating, 3 swelling, 4 full feeling, 5 fatigue.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>52389-155-80</NDCCode>
    <PackageDescription>80 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (52389-155-80) </PackageDescription>
    <NDC11Code>52389-0155-80</NDC11Code>
    <ProductNDC>52389-155</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Diurex</ProprietaryName>
    <ProprietaryNameSuffix>Ultra</ProprietaryNameSuffix>
    <NonProprietaryName>Caffeine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050901</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M027</ApplicationNumber>
    <LabelerName>Kobayashi Healthcare International, Inc.</LabelerName>
    <SubstanceName>CAFFEINE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20050901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the relief of: : 1 temporary water retention, 2 bloating, 3 swelling, 4 full feeling, 5 fatigue.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>52389-155-90</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (52389-155-90)  / 90 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
    <NDC11Code>52389-0155-90</NDC11Code>
    <ProductNDC>52389-155</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Diurex</ProprietaryName>
    <ProprietaryNameSuffix>Ultra</ProprietaryNameSuffix>
    <NonProprietaryName>Caffeine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050901</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M027</ApplicationNumber>
    <LabelerName>Kobayashi Healthcare International, Inc.</LabelerName>
    <SubstanceName>CAFFEINE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Methylxanthine [EPC], Xanthines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20050901</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the relief of: : 1 temporary water retention, 2 bloating, 3 swelling, 4 full feeling, 5 fatigue.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>43744-155-80</NDCCode>
    <PackageDescription>20000 g in 1 DRUM (43744-155-80)</PackageDescription>
    <NDC11Code>43744-0155-80</NDC11Code>
    <ProductNDC>43744-155</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Celecoxib</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20120901</StartMarketingDate>
    <EndMarketingDate>20130624</EndMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>CBSCHEM LIMITED</LabelerName>
    <SubstanceName>CELECOXIB</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>0338-9644-12</NDCCode>
    <PackageDescription>12 BAG in 1 CARTON (0338-9644-12)  / 100 mL in 1 BAG (0338-9644-01) </PackageDescription>
    <NDC11Code>00338-9644-12</NDC11Code>
    <ProductNDC>0338-9644</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium In 0.9% Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240214</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217512</ApplicationNumber>
    <LabelerName>Baxter Healthcare Company</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/100mL</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium is a proton pump inhibitor (PPI) indicated in adults for the following: : 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1) , 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium in 0.9% sodium chloride injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The thawed solution of pantoprazole sodium in 0.9% sodium chloride injection is in the pH range 9.0 to 10.5. Pantoprazole sodium in 0.9% sodium chloride injection is supplied for intravenous administration as a frozen, premixed, iso-osmotic, sterile, nonpyrogenic 50 mL or 100 mL single-dose GALAXY container in following presentations:. 40 mg/100 mL (0.4 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. 40 mg/50 mL (0.8 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 77.5 mg histidine, USP; 450 mg sodium chloride, USP;. 80 mg/100 mL (0.8 mg/mL): containing 80 mg of pantoprazole (equivalent to 90.2 mg of pantoprazole sodium USP); 2 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. Sodium hydroxide and/or hydrochloric acid may be used to adjust pH. The solution is intended for intravenous use after thawing to room temperature. Thawed solution is expected to range from colorless to yellow over time.</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-9646-24</NDCCode>
    <PackageDescription>24 BAG in 1 CARTON (0338-9646-24)  / 50 mL in 1 BAG (0338-9646-01) </PackageDescription>
    <NDC11Code>00338-9646-24</NDC11Code>
    <ProductNDC>0338-9646</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium In 0.9% Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240214</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217512</ApplicationNumber>
    <LabelerName>Baxter Healthcare Company</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/50mL</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium is a proton pump inhibitor (PPI) indicated in adults for the following: : 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1) , 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium in 0.9% sodium chloride injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The thawed solution of pantoprazole sodium in 0.9% sodium chloride injection is in the pH range 9.0 to 10.5. Pantoprazole sodium in 0.9% sodium chloride injection is supplied for intravenous administration as a frozen, premixed, iso-osmotic, sterile, nonpyrogenic 50 mL or 100 mL single-dose GALAXY container in following presentations:. 40 mg/100 mL (0.4 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. 40 mg/50 mL (0.8 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 77.5 mg histidine, USP; 450 mg sodium chloride, USP;. 80 mg/100 mL (0.8 mg/mL): containing 80 mg of pantoprazole (equivalent to 90.2 mg of pantoprazole sodium USP); 2 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. Sodium hydroxide and/or hydrochloric acid may be used to adjust pH. The solution is intended for intravenous use after thawing to room temperature. Thawed solution is expected to range from colorless to yellow over time.</Description>
  </NDC>
  <NDC>
    <NDCCode>0338-9648-12</NDCCode>
    <PackageDescription>12 BAG in 1 CARTON (0338-9648-12)  / 100 mL in 1 BAG (0338-9648-01) </PackageDescription>
    <NDC11Code>00338-9648-12</NDC11Code>
    <ProductNDC>0338-9648</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium In 0.9% Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240214</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA217512</ApplicationNumber>
    <LabelerName>Baxter Healthcare Company</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/100mL</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium is a proton pump inhibitor (PPI) indicated in adults for the following: : 1 Short-term treatment (7 to 10 days) of gastroesophageal reflux disease (GERD) associated with a history of Erosive Esophagitis (EE). (1.1) , 2 Pathological hypersecretion conditions including Zollinger-Ellison (ZE) Syndrome. (1.2).</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium in 0.9% sodium chloride injection, a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium is a white to off-white crystalline powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. The thawed solution of pantoprazole sodium in 0.9% sodium chloride injection is in the pH range 9.0 to 10.5. Pantoprazole sodium in 0.9% sodium chloride injection is supplied for intravenous administration as a frozen, premixed, iso-osmotic, sterile, nonpyrogenic 50 mL or 100 mL single-dose GALAXY container in following presentations:. 40 mg/100 mL (0.4 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. 40 mg/50 mL (0.8 mg/mL): containing 40 mg of pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP); 1 mg edetate disodium, USP; 77.5 mg histidine, USP; 450 mg sodium chloride, USP;. 80 mg/100 mL (0.8 mg/mL): containing 80 mg of pantoprazole (equivalent to 90.2 mg of pantoprazole sodium USP); 2 mg edetate disodium, USP; 155 mg histidine, USP; 900 mg sodium chloride, USP;. Sodium hydroxide and/or hydrochloric acid may be used to adjust pH. The solution is intended for intravenous use after thawing to room temperature. Thawed solution is expected to range from colorless to yellow over time.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7805-01</NDCCode>
    <PackageDescription>1 POUCH in 1 CARTON (0562-7805-01)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7805-00) </PackageDescription>
    <NDC11Code>00562-7805-01</NDC11Code>
    <ProductNDC>0562-7805</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Rhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM is an immune globulin indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM is intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM Rho(D) Immune Globulin (Human) is a sterile solution containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. It is manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes both enveloped and non‐enveloped viruses as small as approximately 20 nm via a size-exclusion mechanism. Following viral filtration, quality control tests are performed on the 20 nm filtration membrane to ensure filter integrity. The viral inactivation step (Solvent/Detergent treatment) utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV, HBV and West Nile Virus (WNV).3,9, 10, 11. The donor selection process, the fractionation process, the viral filtration step, the viral inactivation process and other manufacturing process steps increase product safety by reducing the virus load potentially present in the starting material and thus reducing the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.12 There have been no documented cases of infectious disease transmission by RhoGAM. Laboratory spiking studies, performed in accordance with good laboratory practices 3 have shown that the cumulative viral removal and inactivation capability of the RhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS is manufactured by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7805-05</NDCCode>
    <PackageDescription>5 POUCH in 1 CARTON (0562-7805-05)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7805-00) </PackageDescription>
    <NDC11Code>00562-7805-05</NDC11Code>
    <ProductNDC>0562-7805</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Rhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM is an immune globulin indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM is intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM Rho(D) Immune Globulin (Human) is a sterile solution containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. It is manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes both enveloped and non‐enveloped viruses as small as approximately 20 nm via a size-exclusion mechanism. Following viral filtration, quality control tests are performed on the 20 nm filtration membrane to ensure filter integrity. The viral inactivation step (Solvent/Detergent treatment) utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV, HBV and West Nile Virus (WNV).3,9, 10, 11. The donor selection process, the fractionation process, the viral filtration step, the viral inactivation process and other manufacturing process steps increase product safety by reducing the virus load potentially present in the starting material and thus reducing the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.12 There have been no documented cases of infectious disease transmission by RhoGAM. Laboratory spiking studies, performed in accordance with good laboratory practices 3 have shown that the cumulative viral removal and inactivation capability of the RhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS is manufactured by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7805-25</NDCCode>
    <PackageDescription>25 POUCH in 1 CARTON (0562-7805-25)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7805-00) </PackageDescription>
    <NDC11Code>00562-7805-25</NDC11Code>
    <ProductNDC>0562-7805</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Rhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM is an immune globulin indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM is intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM Rho(D) Immune Globulin (Human) is a sterile solution containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. It is manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes both enveloped and non‐enveloped viruses as small as approximately 20 nm via a size-exclusion mechanism. Following viral filtration, quality control tests are performed on the 20 nm filtration membrane to ensure filter integrity. The viral inactivation step (Solvent/Detergent treatment) utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV, HBV and West Nile Virus (WNV).3,9, 10, 11. The donor selection process, the fractionation process, the viral filtration step, the viral inactivation process and other manufacturing process steps increase product safety by reducing the virus load potentially present in the starting material and thus reducing the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.12 There have been no documented cases of infectious disease transmission by RhoGAM. Laboratory spiking studies, performed in accordance with good laboratory practices 3 have shown that the cumulative viral removal and inactivation capability of the RhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS is manufactured by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7806-01</NDCCode>
    <PackageDescription>1 POUCH in 1 CARTON (0562-7806-01)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7806-00) </PackageDescription>
    <NDC11Code>00562-7806-01</NDC11Code>
    <ProductNDC>0562-7806</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Micrhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM and MICRhoGAM are immune globulins indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM and MICRhoGAM are intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM and MICRhoGAM Rho(D) Immune Globulin (Human) are sterile solutions containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. They are manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 A single dose of MICRhoGAM contains sufficient anti-D (50 μg or 250 IU) to suppress the immune response to up to 2.5 mL of Rh-positive red blood cells. The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes viruses via a size-exclusion mechanism utilizing a Viresolve 180 nanofiltration membrane (ultrafiltration mode) to remove enveloped and non-enveloped viruses. Following viral filtration, quality control tests (CorrTest and diffusion test) are performed on the Viresolve 180 nanofiltration membrane to ensure filter integrity.9 The viral inactivation step utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV and West Nile Virus (WNV).3,10. The donor selection process, the fractionation process, the viral filtration step and the viral inactivation process increase product safety by reducing the virus load and thus the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.11 There have been no documented cases of infectious disease transmission by RhoGAM or MICRhoGAM. Laboratory spiking studies3,12 have shown that the cumulative viral removal and inactivation capability of the RhoGAM / MICRhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS and MICRhoGAM Ultra-Filtered PLUS are manufactured for Kedrion Biopharma Inc. either by Ortho-Clinical Diagnostics, Inc. or by Kedrion Biopharma Inc. up to the bulk products, and all are filled and packaged by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7806-05</NDCCode>
    <PackageDescription>5 POUCH in 1 CARTON (0562-7806-05)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7806-00) </PackageDescription>
    <NDC11Code>00562-7806-05</NDC11Code>
    <ProductNDC>0562-7806</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Micrhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM and MICRhoGAM are immune globulins indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM and MICRhoGAM are intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM and MICRhoGAM Rho(D) Immune Globulin (Human) are sterile solutions containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. They are manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 A single dose of MICRhoGAM contains sufficient anti-D (50 μg or 250 IU) to suppress the immune response to up to 2.5 mL of Rh-positive red blood cells. The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes viruses via a size-exclusion mechanism utilizing a Viresolve 180 nanofiltration membrane (ultrafiltration mode) to remove enveloped and non-enveloped viruses. Following viral filtration, quality control tests (CorrTest and diffusion test) are performed on the Viresolve 180 nanofiltration membrane to ensure filter integrity.9 The viral inactivation step utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV and West Nile Virus (WNV).3,10. The donor selection process, the fractionation process, the viral filtration step and the viral inactivation process increase product safety by reducing the virus load and thus the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.11 There have been no documented cases of infectious disease transmission by RhoGAM or MICRhoGAM. Laboratory spiking studies3,12 have shown that the cumulative viral removal and inactivation capability of the RhoGAM / MICRhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS and MICRhoGAM Ultra-Filtered PLUS are manufactured for Kedrion Biopharma Inc. either by Ortho-Clinical Diagnostics, Inc. or by Kedrion Biopharma Inc. up to the bulk products, and all are filled and packaged by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>0562-7806-25</NDCCode>
    <PackageDescription>25 POUCH in 1 CARTON (0562-7806-25)  / 1 INJECTION, SOLUTION in 1 POUCH (0562-7806-00) </PackageDescription>
    <NDC11Code>00562-7806-25</NDC11Code>
    <ProductNDC>0562-7806</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Micrhogam Ultra-filtered Plus</ProprietaryName>
    <NonProprietaryName>Human Rho(d) Immune Globulin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20070309</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA103777</ApplicationNumber>
    <LabelerName>Kedrion Biopharma Inc</LabelerName>
    <SubstanceName>HUMAN RHO(D) IMMUNE GLOBULIN</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>ug/1</StrengthUnit>
    <Pharm_Classes>Endogenous Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070309</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>RhoGAM and MICRhoGAM are immune globulins indicated for use in preventing Rh immunization for: 1 Pregnancy and other obstetrical conditions in Rh-negative women unless the father or baby are conclusively Rh-negative, e.g. delivery of an Rh-positive baby irrespective of the ABO groups of the mother and baby, any antepartum fetal-maternal hemorrhage (suspected or proven), actual or threatened pregnancy loss at any stage of gestation and ectopic pregnancy. (1.1), 2 Prevention of Rh immunization in any Rh-negative person after incompatible transfusion of Rh-positive blood or blood products. (1.2), 3 Limitation of usePregnancy and other obstetrical conditions: In the case of postpartum use, RhoGAM and MICRhoGAM are intended for maternal administration. Do not inject the newborn infant. (1.3).</IndicationAndUsage>
    <Description>RhoGAM and MICRhoGAM Rho(D) Immune Globulin (Human) are sterile solutions containing immunoglobulin G (IgG) anti-D (anti-Rh) for use in preventing Rh immunization. They are manufactured from human plasma containing anti-D from Rh-negative donors immunized with Rh-positive red blood cells. A single dose of RhoGAM contains sufficient anti-D (300 μg or 1500 IU) to suppress the immune response to up to 15 mL of Rh-positive red blood cells.7 A single dose of MICRhoGAM contains sufficient anti-D (50 μg or 250 IU) to suppress the immune response to up to 2.5 mL of Rh-positive red blood cells. The anti-D dose is measured by comparison to the RhoGAM in-house reference standard, the potency of which is established relative to the U.S./World Health Organization/European Pharmacopoeia Standard Anti-D Immunoglobulin Rho(D) Immune Globulin (Human).8. Plasma for RhoGAM is typically sourced from a donor center owned and operated by KEDPlasma LLC., US Lic. No. 1876. All donors are carefully screened by history and laboratory testing to reduce the risk of transmitting blood-borne pathogens from infected donors. Each plasma donation is tested and found to be non-reactive for the presence of hepatitis B surface antigen (HBsAg) and antibodies to hepatitis C (HCV) and human immunodeficiency viruses (HIV) 1 and 2. Additionally, plasma is tested by FDA licensed Nucleic Acid Testing (NAT) for hepatitis B virus (HBV), HCV and HIV-1. Each plasma unit must be negative (non-reactive) in all tests. Plasma is tested by in-process NAT procedures for hepatitis A virus (HAV) and parvovirus B19 (B19) in a minipool format. Only plasma that has passed virus screening is used for production. The NAT procedure for B19 detects all three genotypes based upon sequence alignment of known virus isolates. The limit of B19 DNA in the manufacturing pool is set not to exceed 104 IU per mL. Fractionation of the plasma is performed by a modification of the cold alcohol procedure that has been shown to significantly lower viral titers.3 Following plasma fractionation, a viral clearance filtration step and a viral inactivation step are performed. The viral filtration step removes viruses via a size-exclusion mechanism utilizing a Viresolve 180 nanofiltration membrane (ultrafiltration mode) to remove enveloped and non-enveloped viruses. Following viral filtration, quality control tests (CorrTest and diffusion test) are performed on the Viresolve 180 nanofiltration membrane to ensure filter integrity.9 The viral inactivation step utilizes Triton X-100 and tri-n-butyl phosphate (TNBP) to inactivate enveloped viruses such as HCV, HIV and West Nile Virus (WNV).3,10. The donor selection process, the fractionation process, the viral filtration step and the viral inactivation process increase product safety by reducing the virus load and thus the risk of transmission of enveloped and non-enveloped viruses. Rho(D) Immune Globulin (Human) intended for intramuscular use and prepared by cold alcohol fractionation has not been shown to transmit hepatitis or other infectious diseases.11 There have been no documented cases of infectious disease transmission by RhoGAM or MICRhoGAM. Laboratory spiking studies3,12 have shown that the cumulative viral removal and inactivation capability of the RhoGAM / MICRhoGAM manufacturing process is as follows. The safety of Rho(D) Immune Globulin (Human) has been further shown in an empirical study of viral marker rates in female blood donors in the United States.13 This study revealed that Rh-negative donors, of whom an estimated 55-60% had received Rho(D) Immune Globulin (Human) for pregnancy-related indications, had prevalence and incidence viral marker rates similar to those of Rh-positive female donors who had not received Rho(D) Immune Globulin (Human). The final product contains 5 ± 1% IgG, 2.9 mg/mL sodium chloride, 0.01% Polysorbate 80 (non-animal derived) and 15 mg/mL glycine. Small amounts of IgA, typically less than 15 μg per dose, are present.3 The pH range is 6.20 - 7.00 and IgG purity is &gt; 98%. The product contains no added human serum albumin (HSA), no thimerosal or other preservatives and utilizes a latex-free delivery system. RhoGAM Ultra-Filtered PLUS and MICRhoGAM Ultra-Filtered PLUS are manufactured for Kedrion Biopharma Inc. either by Ortho-Clinical Diagnostics, Inc. or by Kedrion Biopharma Inc. up to the bulk products, and all are filled and packaged by Kedrion Biopharma Inc., 155 Duryea Road, Melville, NY 11747 USA.</Description>
  </NDC>
  <NDC>
    <NDCCode>10812-451-01</NDCCode>
    <PackageDescription>155 g in 1 CAN (10812-451-01)</PackageDescription>
    <NDC11Code>10812-0451-01</NDC11Code>
    <ProductNDC>10812-451</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Neutrogena Cooldry Sport With Micromesh</ProprietaryName>
    <ProprietaryNameSuffix>Sunscreen Broad Spectrum Spf30</ProprietaryNameSuffix>
    <NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene, And Oxybenzone</NonProprietaryName>
    <DosageFormName>AEROSOL, SPRAY</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20141201</StartMarketingDate>
    <EndMarketingDate>20180301</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>Johnson &amp; Johnson Consumer Inc.</LabelerName>
    <SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
    <StrengthNumber>30; 80; 50; 40; 50</StrengthNumber>
    <StrengthUnit>mg/g; mg/g; mg/g; mg/g; mg/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2018-03-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>13107-155-01</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (13107-155-01) </PackageDescription>
    <NDC11Code>13107-0155-01</NDC11Code>
    <ProductNDC>13107-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paroxetine</ProprietaryName>
    <NonProprietaryName>Paroxetine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20091203</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078406</ApplicationNumber>
    <LabelerName>Aurolife Pharma LLC</LabelerName>
    <SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paroxetine tablets are indicated in adults for the treatment of:  : 1 Major depressive disorder (MDD) , 2 Obsessive compulsive disorder (OCD), 3 Panic disorder (PD) , 4 Social anxiety disorder (SAD) , 5 Generalized anxiety disorder (GAD), 6 Posttraumatic stress disorder (PTSD).</IndicationAndUsage>
    <Description>Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively.Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&amp;C Yellow #10 Aluminum Lake and FD&amp;C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&amp;C Red #30 Aluminum Lake. 30 mg tablet contains FD&amp;C Blue #2 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>13107-155-05</NDCCode>
    <PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (13107-155-05) </PackageDescription>
    <NDC11Code>13107-0155-05</NDC11Code>
    <ProductNDC>13107-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paroxetine</ProprietaryName>
    <NonProprietaryName>Paroxetine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20091203</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078406</ApplicationNumber>
    <LabelerName>Aurolife Pharma LLC</LabelerName>
    <SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paroxetine tablets are indicated in adults for the treatment of:  : 1 Major depressive disorder (MDD) , 2 Obsessive compulsive disorder (OCD), 3 Panic disorder (PD) , 4 Social anxiety disorder (SAD) , 5 Generalized anxiety disorder (GAD), 6 Posttraumatic stress disorder (PTSD).</IndicationAndUsage>
    <Description>Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively.Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&amp;C Yellow #10 Aluminum Lake and FD&amp;C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&amp;C Red #30 Aluminum Lake. 30 mg tablet contains FD&amp;C Blue #2 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>13107-155-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (13107-155-30) </PackageDescription>
    <NDC11Code>13107-0155-30</NDC11Code>
    <ProductNDC>13107-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paroxetine</ProprietaryName>
    <NonProprietaryName>Paroxetine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20091203</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078406</ApplicationNumber>
    <LabelerName>Aurolife Pharma LLC</LabelerName>
    <SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paroxetine tablets are indicated in adults for the treatment of:  : 1 Major depressive disorder (MDD) , 2 Obsessive compulsive disorder (OCD), 3 Panic disorder (PD) , 4 Social anxiety disorder (SAD) , 5 Generalized anxiety disorder (GAD), 6 Posttraumatic stress disorder (PTSD).</IndicationAndUsage>
    <Description>Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively.Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&amp;C Yellow #10 Aluminum Lake and FD&amp;C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&amp;C Red #30 Aluminum Lake. 30 mg tablet contains FD&amp;C Blue #2 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>13107-155-90</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (13107-155-90) </PackageDescription>
    <NDC11Code>13107-0155-90</NDC11Code>
    <ProductNDC>13107-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paroxetine</ProprietaryName>
    <NonProprietaryName>Paroxetine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20091203</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078406</ApplicationNumber>
    <LabelerName>Aurolife Pharma LLC</LabelerName>
    <SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paroxetine tablets are indicated in adults for the treatment of:  : 1 Major depressive disorder (MDD) , 2 Obsessive compulsive disorder (OCD), 3 Panic disorder (PD) , 4 Social anxiety disorder (SAD) , 5 Generalized anxiety disorder (GAD), 6 Posttraumatic stress disorder (PTSD).</IndicationAndUsage>
    <Description>Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively.Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&amp;C Yellow #10 Aluminum Lake and FD&amp;C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&amp;C Red #30 Aluminum Lake. 30 mg tablet contains FD&amp;C Blue #2 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>13107-155-99</NDCCode>
    <PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (13107-155-99) </PackageDescription>
    <NDC11Code>13107-0155-99</NDC11Code>
    <ProductNDC>13107-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paroxetine</ProprietaryName>
    <NonProprietaryName>Paroxetine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20091203</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078406</ApplicationNumber>
    <LabelerName>Aurolife Pharma LLC</LabelerName>
    <SubstanceName>PAROXETINE HYDROCHLORIDE HEMIHYDRATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paroxetine tablets are indicated in adults for the treatment of:  : 1 Major depressive disorder (MDD) , 2 Obsessive compulsive disorder (OCD), 3 Panic disorder (PD) , 4 Social anxiety disorder (SAD) , 5 Generalized anxiety disorder (GAD), 6 Posttraumatic stress disorder (PTSD).</IndicationAndUsage>
    <Description>Paroxetine tablets, USP contain paroxetine hydrochloride, an SSRI. It is the hydrochloride salt of a phenylpiperidine compound identified chemically as (-)-trans-4R-(4'-fluorophenyl)-3S-[(3',4'-methylenedioxyphenoxy) methyl] piperidine hydrochloride hemihydrate and has the molecular formula of C19H20FNO3HCl1/2H2O. The molecular weight is 374.8 (329.4 as free base). The structural formula of paroxetine hydrochloride is: Paroxetine hydrochloride USP is an odorless, off-white powder, having a melting point range of 120° to 138°C and a solubility of 5.4 mg/mL in water. Paroxetine tablets USP are for oral administration. Each film-coated tablet contains 10 mg, 20 mg, 30 mg, or 40 mg of paroxetine equivalent to 11.1 mg, 22.2 mg, 33.3 mg or 44.4 mg of paroxetine hydrochloride, respectively.Inactive ingredients consist of dibasic calcium phosphate dihydrate, lactose monohydrate, sodium starch glycolate, dibasic calcium phosphate anhydrous, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol and polysorbate 80. In addition to this, 10 mg tablet contains D&amp;C Yellow #10 Aluminum Lake and FD&amp;C Yellow #6 Aluminum Lake. 20 mg and 40 mg tablets contain D&amp;C Red #30 Aluminum Lake. 30 mg tablet contains FD&amp;C Blue #2 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-155-05</NDCCode>
    <PackageDescription>500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-155-05) </PackageDescription>
    <NDC11Code>13668-0155-05</NDC11Code>
    <ProductNDC>13668-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
    <NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151019</StartMarketingDate>
    <EndMarketingDate>20241031</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203636</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20151019</StartMarketingDatePackage>
    <EndMarketingDatePackage>20241031</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Esomeprazole magnesium is a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-Term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
    <Description>The active ingredient in esomeprazole magnesium delayed-release capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1 H-benzimidazole-1-yl) magnesium, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2 Mg with molecular weight of 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium is supplied in delayed-release capsules. Each delayed-release capsule contains 20 mg, or 40 mg of esomeprazole (present as 20.7 mg, or 41.4 mg esomeprazole magnesium) in the form of enteric-coated pellets with the following inactive ingredients. 20 mg: D&amp;C Red 28, ethyl cellulose, FD &amp; C Red 40, gelatin, iron oxide yellow, magnesium oxide (light), magnesium stearate, methacrylic acid co-polymer, mono and diglycerides, polysorbate 80, povidone (K90D), sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and triethyl citrate. 40 mg: D&amp;C Red 28, ethyl cellulose, FD &amp; C Red 40, gelatin, magnesium oxide (light), magnesium stearate, methacrylic acid co-polymer, mono and diglycerides, polysorbate 80, povidone (K90D), sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and triethyl citrate. Capsules have pharmaceutical grade printing ink that contains black iron oxide, potassium hydroxide, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. USP Dissolution Test is pending.</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-155-10</NDCCode>
    <PackageDescription>1000 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-155-10) </PackageDescription>
    <NDC11Code>13668-0155-10</NDC11Code>
    <ProductNDC>13668-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
    <NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151019</StartMarketingDate>
    <EndMarketingDate>20241031</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203636</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20151019</StartMarketingDatePackage>
    <EndMarketingDatePackage>20241031</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Esomeprazole magnesium is a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-Term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
    <Description>The active ingredient in esomeprazole magnesium delayed-release capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1 H-benzimidazole-1-yl) magnesium, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2 Mg with molecular weight of 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium is supplied in delayed-release capsules. Each delayed-release capsule contains 20 mg, or 40 mg of esomeprazole (present as 20.7 mg, or 41.4 mg esomeprazole magnesium) in the form of enteric-coated pellets with the following inactive ingredients. 20 mg: D&amp;C Red 28, ethyl cellulose, FD &amp; C Red 40, gelatin, iron oxide yellow, magnesium oxide (light), magnesium stearate, methacrylic acid co-polymer, mono and diglycerides, polysorbate 80, povidone (K90D), sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and triethyl citrate. 40 mg: D&amp;C Red 28, ethyl cellulose, FD &amp; C Red 40, gelatin, magnesium oxide (light), magnesium stearate, methacrylic acid co-polymer, mono and diglycerides, polysorbate 80, povidone (K90D), sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and triethyl citrate. Capsules have pharmaceutical grade printing ink that contains black iron oxide, potassium hydroxide, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. USP Dissolution Test is pending.</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-155-30</NDCCode>
    <PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-155-30) </PackageDescription>
    <NDC11Code>13668-0155-30</NDC11Code>
    <ProductNDC>13668-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
    <NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151019</StartMarketingDate>
    <EndMarketingDate>20241031</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203636</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20151019</StartMarketingDatePackage>
    <EndMarketingDatePackage>20241031</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Esomeprazole magnesium is a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-Term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
    <Description>The active ingredient in esomeprazole magnesium delayed-release capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1 H-benzimidazole-1-yl) magnesium, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2 Mg with molecular weight of 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium is supplied in delayed-release capsules. Each delayed-release capsule contains 20 mg, or 40 mg of esomeprazole (present as 20.7 mg, or 41.4 mg esomeprazole magnesium) in the form of enteric-coated pellets with the following inactive ingredients. 20 mg: D&amp;C Red 28, ethyl cellulose, FD &amp; C Red 40, gelatin, iron oxide yellow, magnesium oxide (light), magnesium stearate, methacrylic acid co-polymer, mono and diglycerides, polysorbate 80, povidone (K90D), sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and triethyl citrate. 40 mg: D&amp;C Red 28, ethyl cellulose, FD &amp; C Red 40, gelatin, magnesium oxide (light), magnesium stearate, methacrylic acid co-polymer, mono and diglycerides, polysorbate 80, povidone (K90D), sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and triethyl citrate. Capsules have pharmaceutical grade printing ink that contains black iron oxide, potassium hydroxide, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. USP Dissolution Test is pending.</Description>
  </NDC>
  <NDC>
    <NDCCode>13668-155-90</NDCCode>
    <PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (13668-155-90) </PackageDescription>
    <NDC11Code>13668-0155-90</NDC11Code>
    <ProductNDC>13668-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
    <NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20151019</StartMarketingDate>
    <EndMarketingDate>20241031</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203636</ApplicationNumber>
    <LabelerName>Torrent Pharmaceuticals Limited</LabelerName>
    <SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20151019</StartMarketingDatePackage>
    <EndMarketingDatePackage>20241031</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Esomeprazole magnesium is a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-Term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
    <Description>The active ingredient in esomeprazole magnesium delayed-release capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5-dimethyl-2-pyridinyl)methyl]sulfinyl]-1 H-benzimidazole-1-yl) magnesium, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R- isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2 Mg with molecular weight of 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium is supplied in delayed-release capsules. Each delayed-release capsule contains 20 mg, or 40 mg of esomeprazole (present as 20.7 mg, or 41.4 mg esomeprazole magnesium) in the form of enteric-coated pellets with the following inactive ingredients. 20 mg: D&amp;C Red 28, ethyl cellulose, FD &amp; C Red 40, gelatin, iron oxide yellow, magnesium oxide (light), magnesium stearate, methacrylic acid co-polymer, mono and diglycerides, polysorbate 80, povidone (K90D), sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and triethyl citrate. 40 mg: D&amp;C Red 28, ethyl cellulose, FD &amp; C Red 40, gelatin, magnesium oxide (light), magnesium stearate, methacrylic acid co-polymer, mono and diglycerides, polysorbate 80, povidone (K90D), sodium lauryl sulfate, sugar spheres, talc, titanium dioxide and triethyl citrate. Capsules have pharmaceutical grade printing ink that contains black iron oxide, potassium hydroxide, povidone, propylene glycol, shellac, sodium hydroxide and titanium dioxide. USP Dissolution Test is pending.</Description>
  </NDC>
  <NDC>
    <NDCCode>16590-155-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16590-155-30)</PackageDescription>
    <NDC11Code>16590-0155-30</NDC11Code>
    <ProductNDC>16590-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mirtazapine</ProprietaryName>
    <NonProprietaryName>Mirtazapine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20030601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076312</ApplicationNumber>
    <LabelerName>STAT Rx USA LLC</LabelerName>
    <SubstanceName>MIRTAZAPINE</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2018-02-07</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Mirtazapine Tablets USP are indicated for the treatment of major depressive disorder. The efficacy of mirtazapine in the treatment of major depressive disorder was established in six week controlled trials of outpatients whose diagnoses corresponded most closely to the Diagnostic and Statistical Manual of Mental Disorders-3rd edition (DSM-lll) category of major depressive disorder (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-lV) implies a prominent and relatively persistent (nearly every day for at least 2 weeks) depressed or dysphoric mood that usually interferes with daily functioning, and includes at least five of the following nine symptoms: depressed mood, loss of interest in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The effectiveness of mirtazapine in hospitalized depressed patients has not been adequately studied. The efficacy of mirtazapine in maintaining a response in patients with major depressive disorder for up to 40 weeks following 8-12 weeks of initial open-label treatment was demonstrated in a placebo-controlled trial. Nevertheless, the physician who elects to use mirtazapine for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (See CLINICAL PHARMACOLOGY).</IndicationAndUsage>
    <Description>Mirtazapine Tablets USP are an orally administered drug. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-Hexahydro-2-methylpyrazino[2,1-a]pyrido[2,3-c]benzazepine and has the molecular formula of C17H19N3. Its molecular weight is 265.35.  The structural formula is the following and it is the racemic mixture. Mirtazapine is a white to creamy white crystalline powder which is slightly soluble in water. Mirtazapine is supplied for oral administration as scored, film-coated tablets containing 15 mg, 30 mg or 45 mg mirtazapine. In addition, each tablet contains the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, opadry white (for 15 mg and 45 mg tablets only, hypromellose, polyethylene glycol, polysorbate 80, and titanium dioxide) and opadry yellow (for 30 mg only, hypromellose, iron oxide yellow, polyethylene glycol, polysorbate 80, and titanium dioxide).</Description>
  </NDC>
  <NDC>
    <NDCCode>21220-155-01</NDCCode>
    <PackageDescription>7108 L in 1 CYLINDER (21220-155-01) </PackageDescription>
    <NDC11Code>21220-0155-01</NDC11Code>
    <ProductNDC>21220-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Helium/oxygen Mixture 80/20</ProprietaryName>
    <NonProprietaryName>Helium/oxygen Mixture 80/20</NonProprietaryName>
    <DosageFormName>GAS</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19750101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA205849</ApplicationNumber>
    <LabelerName>General Air Service &amp; Supply Co.</LabelerName>
    <SubstanceName>OXYGEN</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mL/L</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-11-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19750101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>21220-155-02</NDCCode>
    <PackageDescription>708 L in 1 CYLINDER (21220-155-02) </PackageDescription>
    <NDC11Code>21220-0155-02</NDC11Code>
    <ProductNDC>21220-155</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Helium/oxygen Mixture 80/20</ProprietaryName>
    <NonProprietaryName>Helium/oxygen Mixture 80/20</NonProprietaryName>
    <DosageFormName>GAS</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19750101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA205849</ApplicationNumber>
    <LabelerName>General Air Service &amp; Supply Co.</LabelerName>
    <SubstanceName>OXYGEN</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mL/L</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-11-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19750101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>42254-155-30</NDCCode>
    <PackageDescription>30 TABLET, CHEWABLE in 1 BOTTLE (42254-155-30)</PackageDescription>
    <NDC11Code>42254-0155-30</NDC11Code>
    <ProductNDC>42254-155</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Acetaminophen</ProprietaryName>
    <NonProprietaryName>Acetaminophen</NonProprietaryName>
    <DosageFormName>TABLET, CHEWABLE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120216</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part343</ApplicationNumber>
    <LabelerName>Rebel Distributors Corp</LabelerName>
    <SubstanceName>ACETAMINOPHEN</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>temporarily reduces fever and relieves minor aches and pains caused by. headachecommon coldflutoothachesore throat.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>43353-051-09</NDCCode>
    <PackageDescription>9000 TABLET in 1 BOTTLE (43353-051-09) </PackageDescription>
    <NDC11Code>43353-0051-09</NDC11Code>
    <ProductNDC>43353-051</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
    <NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141212</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA009768</ApplicationNumber>
    <LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
    <SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150905</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Malaria. Hydroxychloroquine sulfate tablets are indicated for the treatment of uncomplicated malaria due to P. falciparum, P. malariae, P. ovale, and P. vivax. Hydroxychloroquine sulfate tablets are indicated for the prophylaxis of malaria in geographic areas where chloroquine resistance is not reported. Limitations of Use in Malaria: 1 Hydroxychloroquine sulfate tablets are not recommended for the treatment of complicated malaria., 2 Hydroxychloroquine sulfate tablets are not effective against chloroquine or hydroxychloroquine-resistant strains of Plasmodium species (see CLINICAL PHARMACOLOGY – Microbiology). Hydroxychloroquine sulfate tablets are not recommended for the treatment of malaria acquired in geographic areas where chloroquine resistance occurs or when the Plasmodium species has not been identified., 3 Hydroxychloroquine sulfate tablets are not recommended for malaria prophylaxis in geographic areas where chloroquine resistance occurs., 4 Hydroxychloroquine sulfate tablets do not prevent relapses of P. vivax or P.ovale because they are ot active against the hypnozoite forms of these parasites. For radical cure of P. vivax and P. ovale infections, concomitant therapy with an 8-aminoquinoline compound is necessary (see CLINICAL PHARMACOLOGY – Microbiology).</IndicationAndUsage>
    <Description>Hydroxychloroquine sulfate is a white or practically white, crystalline powder, freely soluble in water; practically insoluble in alcohol, chloroform, and in ether. The chemical name for hydroxychloroquine sulfate is 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino]ethanol sulfate (1:1). Its structural formula is. The molecular weight of hydroxychloroquine sulfate is 433.95, and molecular formula is C18H26ClN3O.H2SO4. Hydroxychloroquine sulfate tablets contain 200 mg hydroxychloroquine sulfate, equivalent to 155 mg base, and are for oral administration. Inactive Ingredients: Dibasic calcium phosphate USP, hypromellose USP, magnesium stearate NF, polyethylene glycol 400 NF, polysorbate 80 NF, corn starch, titanium dioxide USP, carnauba wax NF, shellac NF, black iron oxide NF.</Description>
  </NDC>
  <NDC>
    <NDCCode>43353-051-53</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (43353-051-53) </PackageDescription>
    <NDC11Code>43353-0051-53</NDC11Code>
    <ProductNDC>43353-051</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
    <NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141212</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA009768</ApplicationNumber>
    <LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
    <SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150519</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Malaria. Hydroxychloroquine sulfate tablets are indicated for the treatment of uncomplicated malaria due to P. falciparum, P. malariae, P. ovale, and P. vivax. Hydroxychloroquine sulfate tablets are indicated for the prophylaxis of malaria in geographic areas where chloroquine resistance is not reported. Limitations of Use in Malaria: 1 Hydroxychloroquine sulfate tablets are not recommended for the treatment of complicated malaria., 2 Hydroxychloroquine sulfate tablets are not effective against chloroquine or hydroxychloroquine-resistant strains of Plasmodium species (see CLINICAL PHARMACOLOGY – Microbiology). Hydroxychloroquine sulfate tablets are not recommended for the treatment of malaria acquired in geographic areas where chloroquine resistance occurs or when the Plasmodium species has not been identified., 3 Hydroxychloroquine sulfate tablets are not recommended for malaria prophylaxis in geographic areas where chloroquine resistance occurs., 4 Hydroxychloroquine sulfate tablets do not prevent relapses of P. vivax or P.ovale because they are ot active against the hypnozoite forms of these parasites. For radical cure of P. vivax and P. ovale infections, concomitant therapy with an 8-aminoquinoline compound is necessary (see CLINICAL PHARMACOLOGY – Microbiology).</IndicationAndUsage>
    <Description>Hydroxychloroquine sulfate is a white or practically white, crystalline powder, freely soluble in water; practically insoluble in alcohol, chloroform, and in ether. The chemical name for hydroxychloroquine sulfate is 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino]ethanol sulfate (1:1). Its structural formula is. The molecular weight of hydroxychloroquine sulfate is 433.95, and molecular formula is C18H26ClN3O.H2SO4. Hydroxychloroquine sulfate tablets contain 200 mg hydroxychloroquine sulfate, equivalent to 155 mg base, and are for oral administration. Inactive Ingredients: Dibasic calcium phosphate USP, hypromellose USP, magnesium stearate NF, polyethylene glycol 400 NF, polysorbate 80 NF, corn starch, titanium dioxide USP, carnauba wax NF, shellac NF, black iron oxide NF.</Description>
  </NDC>
  <NDC>
    <NDCCode>43353-051-60</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (43353-051-60) </PackageDescription>
    <NDC11Code>43353-0051-60</NDC11Code>
    <ProductNDC>43353-051</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydroxychloroquine Sulfate</ProprietaryName>
    <NonProprietaryName>Hydroxychloroquine Sulfate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20141212</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA009768</ApplicationNumber>
    <LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
    <SubstanceName>HYDROXYCHLOROQUINE SULFATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Antimalarial [EPC], Antirheumatic Agent [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150520</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Malaria. Hydroxychloroquine sulfate tablets are indicated for the treatment of uncomplicated malaria due to P. falciparum, P. malariae, P. ovale, and P. vivax. Hydroxychloroquine sulfate tablets are indicated for the prophylaxis of malaria in geographic areas where chloroquine resistance is not reported. Limitations of Use in Malaria: 1 Hydroxychloroquine sulfate tablets are not recommended for the treatment of complicated malaria., 2 Hydroxychloroquine sulfate tablets are not effective against chloroquine or hydroxychloroquine-resistant strains of Plasmodium species (see CLINICAL PHARMACOLOGY – Microbiology). Hydroxychloroquine sulfate tablets are not recommended for the treatment of malaria acquired in geographic areas where chloroquine resistance occurs or when the Plasmodium species has not been identified., 3 Hydroxychloroquine sulfate tablets are not recommended for malaria prophylaxis in geographic areas where chloroquine resistance occurs., 4 Hydroxychloroquine sulfate tablets do not prevent relapses of P. vivax or P.ovale because they are ot active against the hypnozoite forms of these parasites. For radical cure of P. vivax and P. ovale infections, concomitant therapy with an 8-aminoquinoline compound is necessary (see CLINICAL PHARMACOLOGY – Microbiology).</IndicationAndUsage>
    <Description>Hydroxychloroquine sulfate is a white or practically white, crystalline powder, freely soluble in water; practically insoluble in alcohol, chloroform, and in ether. The chemical name for hydroxychloroquine sulfate is 2-[[4-[(7-Chloro-4-quinolyl) amino]pentyl] ethylamino]ethanol sulfate (1:1). Its structural formula is. The molecular weight of hydroxychloroquine sulfate is 433.95, and molecular formula is C18H26ClN3O.H2SO4. Hydroxychloroquine sulfate tablets contain 200 mg hydroxychloroquine sulfate, equivalent to 155 mg base, and are for oral administration. Inactive Ingredients: Dibasic calcium phosphate USP, hypromellose USP, magnesium stearate NF, polyethylene glycol 400 NF, polysorbate 80 NF, corn starch, titanium dioxide USP, carnauba wax NF, shellac NF, black iron oxide NF.</Description>
  </NDC>
</NDCList>