{
"NDC": [
{
"NDCCode": "52599-282-83",
"PackageDescription": "20 PACKET in 1 CARTON (52599-282-83) > .9 g in 1 PACKET (52599-282-82) ",
"NDC11Code": "52599-0282-83",
"ProductNDC": "52599-282",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Baclezene",
"NonProprietaryName": "Neomycin Sulfate",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140619",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333B",
"LabelerName": "Curazene, LLC",
"SubstanceName": "NEOMYCIN SULFATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/.9g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "11090-282-01",
"PackageDescription": "1 TUBE in 1 CARTON (11090-282-01) / 32 mL in 1 TUBE",
"NDC11Code": "11090-0282-01",
"ProductNDC": "11090-282",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "It Cosmetics Your Skin But Better Cc Plus Nude Glow Color Correcting Medium Coverage Skin Tint Brightening Glow Serum Broad Spectrum Spf 40 Sunscreen - Deep",
"NonProprietaryName": "Octocrylene, Homosalate, Octisalate",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220318",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Beauty Manufacturing Solutions Corp.",
"SubstanceName": "HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "83; 45; 56",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220318",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "0019-0953-05",
"PackageDescription": "25 VIAL, GLASS in 1 BOX (0019-0953-05) / 50 mL in 1 VIAL, GLASS",
"NDC11Code": "00019-0953-05",
"ProductNDC": "0019-0953",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Conray",
"NonProprietaryName": "Iothalamate Meglumine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20031014",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA013295",
"LabelerName": "Liebel-Flarsheim Company LLC",
"SubstanceName": "IOTHALAMATE MEGLUMINE",
"StrengthNumber": "600",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20031014",
"SamplePackage": "N",
"IndicationAndUsage": "Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.",
"Description": "Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen."
},
{
"NDCCode": "0019-0953-10",
"PackageDescription": "12 BOTTLE, GLASS in 1 BOX (0019-0953-10) / 100 mL in 1 BOTTLE, GLASS",
"NDC11Code": "00019-0953-10",
"ProductNDC": "0019-0953",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Conray",
"NonProprietaryName": "Iothalamate Meglumine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20031014",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA013295",
"LabelerName": "Liebel-Flarsheim Company LLC",
"SubstanceName": "IOTHALAMATE MEGLUMINE",
"StrengthNumber": "600",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20031014",
"SamplePackage": "N",
"IndicationAndUsage": "Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.",
"Description": "Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen."
},
{
"NDCCode": "0019-0953-23",
"PackageDescription": "25 VIAL, GLASS in 1 BOX (0019-0953-23) / 30 mL in 1 VIAL, GLASS",
"NDC11Code": "00019-0953-23",
"ProductNDC": "0019-0953",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Conray",
"NonProprietaryName": "Iothalamate Meglumine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20031014",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA013295",
"LabelerName": "Liebel-Flarsheim Company LLC",
"SubstanceName": "IOTHALAMATE MEGLUMINE",
"StrengthNumber": "600",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20031014",
"SamplePackage": "N",
"IndicationAndUsage": "Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.",
"Description": "Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen."
},
{
"NDCCode": "0019-0953-50",
"PackageDescription": "12 BOTTLE, GLASS in 1 BOX (0019-0953-50) / 150 mL in 1 BOTTLE, GLASS",
"NDC11Code": "00019-0953-50",
"ProductNDC": "0019-0953",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Conray",
"NonProprietaryName": "Iothalamate Meglumine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20031014",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA013295",
"LabelerName": "Liebel-Flarsheim Company LLC",
"SubstanceName": "IOTHALAMATE MEGLUMINE",
"StrengthNumber": "600",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20031014",
"SamplePackage": "N",
"IndicationAndUsage": "Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.",
"Description": "Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen."
},
{
"NDCCode": "0143-9708-01",
"PackageDescription": "50 mL in 1 BOX (0143-9708-01) ",
"NDC11Code": "00143-9708-01",
"ProductNDC": "0143-9708",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate",
"NonProprietaryName": "Milrinone Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20101203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077966",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101203",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution."
},
{
"NDCCode": "0143-9708-10",
"PackageDescription": "10 BOX in 1 BOX (0143-9708-10) / 50 mL in 1 BOX (0143-9708-01) ",
"NDC11Code": "00143-9708-10",
"ProductNDC": "0143-9708",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate",
"NonProprietaryName": "Milrinone Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20101203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077966",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101203",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution."
},
{
"NDCCode": "0143-9709-01",
"PackageDescription": "20 mL in 1 BOX (0143-9709-01) ",
"NDC11Code": "00143-9709-01",
"ProductNDC": "0143-9709",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate",
"NonProprietaryName": "Milrinone Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20101203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077966",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101203",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution."
},
{
"NDCCode": "0143-9709-10",
"PackageDescription": "10 VIAL in 1 BOX (0143-9709-10) / 20 mL in 1 VIAL (0143-9709-01) ",
"NDC11Code": "00143-9709-10",
"ProductNDC": "0143-9709",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate",
"NonProprietaryName": "Milrinone Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20101203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077966",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101203",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution."
},
{
"NDCCode": "0143-9710-10",
"PackageDescription": "10 VIAL in 1 BOX (0143-9710-10) / 10 mL in 1 VIAL (0143-9710-01) ",
"NDC11Code": "00143-9710-10",
"ProductNDC": "0143-9710",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate",
"NonProprietaryName": "Milrinone Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20101203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077966",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101203",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution."
},
{
"NDCCode": "0143-9710-25",
"PackageDescription": "25 VIAL in 1 BOX (0143-9710-25) / 10 mL in 1 VIAL (0143-9710-01) ",
"NDC11Code": "00143-9710-25",
"ProductNDC": "0143-9710",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate",
"NonProprietaryName": "Milrinone Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20101203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077966",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101203",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution."
},
{
"NDCCode": "0143-9718-10",
"PackageDescription": "10 CONTAINER in 1 PACKAGE (0143-9718-10) / 200 mL in 1 CONTAINER (0143-9718-01) ",
"NDC11Code": "00143-9718-10",
"ProductNDC": "0143-9718",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate In Dextrose",
"NonProprietaryName": "Milrinone Lactate In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090038",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": "200",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100121",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone lactate injection is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4’-bipyridine]-5‑carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, Single Dose Vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution."
},
{
"NDCCode": "0143-9719-10",
"PackageDescription": "10 CONTAINER in 1 PACKAGE (0143-9719-10) / 100 mL in 1 CONTAINER (0143-9719-01) ",
"NDC11Code": "00143-9719-10",
"ProductNDC": "0143-9719",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate In Dextrose",
"NonProprietaryName": "Milrinone Lactate In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090038",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": "200",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100121",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone lactate injection is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4’-bipyridine]-5‑carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, Single Dose Vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution."
},
{
"NDCCode": "0228-2850-11",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (0228-2850-11) ",
"NDC11Code": "00228-2850-11",
"ProductNDC": "0228-2850",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Guanfacine",
"NonProprietaryName": "Guanfacine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141201",
"EndMarketingDate": "20270531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200881",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "GUANFACINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20141201",
"EndMarketingDatePackage": "20270531",
"SamplePackage": "N",
"IndicationAndUsage": "Guanfacine extended-release tablets are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) as monotherapy and as adjunctive therapy to stimulant medications [see Clinical Studies (14)].",
"Description": "Guanfacine Extended-Release is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2, 6-dichlorophenyl) acetamide monohydrochloride. The chemical structure is. C9H9Cl2N3OHCl M.W. 282.55. Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, crospovidone, fumaric acid, glyceryl behenate, hydroxypropyl cellulose, hypromellose, lactose monohydrate, microcrystalline cellulose, and povidone. In addition, the 1 mg and 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and the 3 mg and 4 mg tablets contain D&C Yellow #10 Aluminum Lake."
},
{
"NDCCode": "0228-2851-11",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (0228-2851-11) ",
"NDC11Code": "00228-2851-11",
"ProductNDC": "0228-2851",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Guanfacine",
"NonProprietaryName": "Guanfacine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141201",
"EndMarketingDate": "20270131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200881",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "GUANFACINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20141201",
"EndMarketingDatePackage": "20270131",
"SamplePackage": "N",
"IndicationAndUsage": "Guanfacine extended-release tablets are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) as monotherapy and as adjunctive therapy to stimulant medications [see Clinical Studies (14)].",
"Description": "Guanfacine Extended-Release is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2, 6-dichlorophenyl) acetamide monohydrochloride. The chemical structure is. C9H9Cl2N3OHCl M.W. 282.55. Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, crospovidone, fumaric acid, glyceryl behenate, hydroxypropyl cellulose, hypromellose, lactose monohydrate, microcrystalline cellulose, and povidone. In addition, the 1 mg and 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and the 3 mg and 4 mg tablets contain D&C Yellow #10 Aluminum Lake."
},
{
"NDCCode": "0228-2853-11",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (0228-2853-11) ",
"NDC11Code": "00228-2853-11",
"ProductNDC": "0228-2853",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Guanfacine",
"NonProprietaryName": "Guanfacine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141201",
"EndMarketingDate": "20270331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200881",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "GUANFACINE HYDROCHLORIDE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20141201",
"EndMarketingDatePackage": "20270331",
"SamplePackage": "N",
"IndicationAndUsage": "Guanfacine extended-release tablets are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) as monotherapy and as adjunctive therapy to stimulant medications [see Clinical Studies (14)].",
"Description": "Guanfacine Extended-Release is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2, 6-dichlorophenyl) acetamide monohydrochloride. The chemical structure is. C9H9Cl2N3OHCl M.W. 282.55. Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, crospovidone, fumaric acid, glyceryl behenate, hydroxypropyl cellulose, hypromellose, lactose monohydrate, microcrystalline cellulose, and povidone. In addition, the 1 mg and 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and the 3 mg and 4 mg tablets contain D&C Yellow #10 Aluminum Lake."
},
{
"NDCCode": "0228-2855-11",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (0228-2855-11) ",
"NDC11Code": "00228-2855-11",
"ProductNDC": "0228-2855",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Guanfacine",
"NonProprietaryName": "Guanfacine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141201",
"EndMarketingDate": "20261130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200881",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "GUANFACINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20141201",
"EndMarketingDatePackage": "20261130",
"SamplePackage": "N",
"IndicationAndUsage": "Guanfacine extended-release tablets are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) as monotherapy and as adjunctive therapy to stimulant medications [see Clinical Studies (14)].",
"Description": "Guanfacine Extended-Release is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2, 6-dichlorophenyl) acetamide monohydrochloride. The chemical structure is. C9H9Cl2N3OHCl M.W. 282.55. Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, crospovidone, fumaric acid, glyceryl behenate, hydroxypropyl cellulose, hypromellose, lactose monohydrate, microcrystalline cellulose, and povidone. In addition, the 1 mg and 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and the 3 mg and 4 mg tablets contain D&C Yellow #10 Aluminum Lake."
},
{
"NDCCode": "0338-6010-48",
"PackageDescription": "10 BAG in 1 CARTON (0338-6010-48) / 100 mL in 1 BAG",
"NDC11Code": "00338-6010-48",
"ProductNDC": "0338-6010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate In Dextrose",
"NonProprietaryName": "Milrinone Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075834",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20020528",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone lactate is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4’-bipyridine]-5-carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 - 4.0). The flexible container is manufactured from a specially designed multilayer plastic (PL 2408). Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution."
},
{
"NDCCode": "0338-6011-37",
"PackageDescription": "10 BAG in 1 CARTON (0338-6011-37) / 200 mL in 1 BAG",
"NDC11Code": "00338-6011-37",
"ProductNDC": "0338-6011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate In Dextrose",
"NonProprietaryName": "Milrinone Lactate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075834",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20020528",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone lactate is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4’-bipyridine]-5-carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 - 4.0). The flexible container is manufactured from a specially designed multilayer plastic (PL 2408). Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution."
},
{
"NDCCode": "0362-1098-90",
"PackageDescription": "5 BLISTER PACK in 1 CARTON (0362-1098-90) / 10 CARTRIDGE in 1 BLISTER PACK / 1.7 mL in 1 CARTRIDGE",
"NDC11Code": "00362-1098-90",
"ProductNDC": "0362-1098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scandonest 3% Plain",
"NonProprietaryName": "Mepivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20171222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088387",
"LabelerName": "Septodont, Inc.",
"SubstanceName": "MEPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20171222",
"SamplePackage": "N",
"IndicationAndUsage": "Mepivacaine is indicated for production of local anesthesia for dental procedures by infiltration or nerve block in adults and pediatric patients.",
"Description": "Mepivacaine Hydrochloride, a tertiary amine used as a local anesthetic, is 1-methyl-2', 6' - pipecoloxylidide monohydrochloride with the following structural formula. C15H22N2O HCI M.W. 282.81. It is a white, crystalline, odorless powder soluble in water, but very resistant to both acid and alkaline hydrolysis. DENTAL CARTRIDGES MAY NOT BE AUTOCLAVED.SCANDONEST® 3% Plain (mepivacaine hydrochloride injection 3% (51 mg/1.7 mL) (30 mg/mL)) is a sterile solution for injection."
},
{
"NDCCode": "0409-1983-10",
"PackageDescription": "10 POUCH in 1 CARTON (0409-1983-10) > 1 BAG in 1 POUCH (0409-1983-01) > 200 mL in 1 BAG",
"NDC11Code": "00409-1983-10",
"ProductNDC": "0409-1983",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate In Dextrose",
"NonProprietaryName": "Milrinone Lactate In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20211004",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213585",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-03-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211004",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone lactate is a member of a new class of bipyridine is inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is freely soluble in dimethyl sulfoxide, very slightly soluble in methanol, practically insoluble in water and in chloroform. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 - 4.0). The flexible container is manufactured from a specially designed multilayer plastic. Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution."
},
{
"NDCCode": "0409-2045-10",
"PackageDescription": "10 POUCH in 1 CARTON (0409-2045-10) > 1 BAG in 1 POUCH (0409-2045-01) > 100 mL in 1 BAG",
"NDC11Code": "00409-2045-10",
"ProductNDC": "0409-2045",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milrinone Lactate In Dextrose",
"NonProprietaryName": "Milrinone Lactate In Dextrose",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220404",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213585",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MILRINONE LACTATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-04-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220404",
"SamplePackage": "N",
"IndicationAndUsage": "Milrinone is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.",
"Description": "Milrinone lactate is a member of a new class of bipyridine is inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is freely soluble in dimethyl sulfoxide, very slightly soluble in methanol, practically insoluble in water and in chloroform. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 - 4.0). The flexible container is manufactured from a specially designed multilayer plastic. Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution."
},
{
"NDCCode": "0456-1500-55",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (0456-1500-55) / 1 KIT in 1 BLISTER PACK",
"NDC11Code": "00456-1500-55",
"ProductNDC": "0456-1500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "KIT",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"EndMarketingDate": "20270831",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "Allergan, Inc.",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20090417",
"EndMarketingDatePackage": "20270831",
"SamplePackage": "N",
"IndicationAndUsage": "SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0456-1510-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (0456-1510-60) ",
"NDC11Code": "00456-1510-60",
"ProductNDC": "0456-1510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090417",
"SamplePackage": "N",
"IndicationAndUsage": "SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0456-1512-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (0456-1512-60) ",
"NDC11Code": "00456-1512-60",
"ProductNDC": "0456-1512",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090417",
"SamplePackage": "N",
"IndicationAndUsage": "SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0456-1525-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (0456-1525-60) ",
"NDC11Code": "00456-1525-60",
"ProductNDC": "0456-1525",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090417",
"SamplePackage": "N",
"IndicationAndUsage": "SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0456-1550-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (0456-1550-60) ",
"NDC11Code": "00456-1550-60",
"ProductNDC": "0456-1550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090417",
"SamplePackage": "N",
"IndicationAndUsage": "SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0456-2200-07",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (0456-2200-07) / 1 KIT in 1 BLISTER PACK (0456-2200-65) * 2 CAPSULE, EXTENDED RELEASE in 1 BLISTER PACK (0456-2220-00) * 5 CAPSULE, EXTENDED RELEASE in 1 BLISTER PACK (0456-2240-00) ",
"NDC11Code": "00456-2200-07",
"ProductNDC": "0456-2200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fetzima",
"NonProprietaryName": "Levomilnacipran Hydrochloride",
"DosageFormName": "KIT",
"RouteName": "ORAL",
"StartMarketingDate": "20230324",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204168",
"LabelerName": "Allergan, Inc.",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230324",
"SamplePackage": "Y",
"IndicationAndUsage": "FETZIMA® is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)]. Limitation of Use: FETZIMA is not approved for the management of fibromyalgia. The efficacy and safety of FETZIMA for the management of fibromyalgia have not been established.",
"Description": "FETZIMA contains levomilnacipran, a selective serotonin and norepinephrine reuptake inhibitor (SNRI), in the form of hydrochloride salt with the chemical name of levomilnacipran hydrochloride is (1S,2R)-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. Its empirical formula is C15H22N2O∙HCl and its molecular weight is 282.8 g/mol. Levomilnacipran (Initial US approval: 2013) is the 1S,2R-enantiomer of milnacipran. The chemical structure of levomilnacipran hydrochloride is. FETZIMA extended-release capsules are intended for oral administration. Each FETZIMA capsule contains 23.0, 45.9, 91.8, or 137.8 mg of levomilnacipran hydrochloride equivalent to 20, 40, 80, or 120 mg of levomilnacipran, respectively. Inactive ingredients include ethylcellulose, hypromellose, povidone, sugar spheres, talc, titanium dioxide, and triethyl citrate. Inactive ingredients also include black iron oxide, red iron oxide (80 mg and 120 mg capsules only), shellac glaze, and yellow iron oxide (20 mg and 40 mg capsules only)."
},
{
"NDCCode": "0456-2202-28",
"PackageDescription": "1 KIT in 1 BLISTER PACK (0456-2202-28) ",
"NDC11Code": "00456-2202-28",
"ProductNDC": "0456-2202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fetzima",
"NonProprietaryName": "Levomilnacipran Hydrochloride",
"DosageFormName": "KIT",
"RouteName": "ORAL",
"StartMarketingDate": "20130725",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204168",
"LabelerName": "Allergan, Inc.",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130725",
"SamplePackage": "N",
"IndicationAndUsage": "FETZIMA® is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)]. Limitation of Use: FETZIMA is not approved for the management of fibromyalgia. The efficacy and safety of FETZIMA for the management of fibromyalgia have not been established.",
"Description": "FETZIMA contains levomilnacipran, a selective serotonin and norepinephrine reuptake inhibitor (SNRI), in the form of hydrochloride salt with the chemical name of levomilnacipran hydrochloride is (1S,2R)-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. Its empirical formula is C15H22N2O∙HCl and its molecular weight is 282.8 g/mol. Levomilnacipran (Initial US approval: 2013) is the 1S,2R-enantiomer of milnacipran. The chemical structure of levomilnacipran hydrochloride is. FETZIMA extended-release capsules are intended for oral administration. Each FETZIMA capsule contains 23.0, 45.9, 91.8, or 137.8 mg of levomilnacipran hydrochloride equivalent to 20, 40, 80, or 120 mg of levomilnacipran, respectively. Inactive ingredients include ethylcellulose, hypromellose, povidone, sugar spheres, talc, titanium dioxide, and triethyl citrate. Inactive ingredients also include black iron oxide, red iron oxide (80 mg and 120 mg capsules only), shellac glaze, and yellow iron oxide (20 mg and 40 mg capsules only)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>52599-282-83</NDCCode>
<PackageDescription>20 PACKET in 1 CARTON (52599-282-83) > .9 g in 1 PACKET (52599-282-82) </PackageDescription>
<NDC11Code>52599-0282-83</NDC11Code>
<ProductNDC>52599-282</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Baclezene</ProprietaryName>
<NonProprietaryName>Neomycin Sulfate</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140619</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333B</ApplicationNumber>
<LabelerName>Curazene, LLC</LabelerName>
<SubstanceName>NEOMYCIN SULFATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/.9g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>11090-282-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (11090-282-01) / 32 mL in 1 TUBE</PackageDescription>
<NDC11Code>11090-0282-01</NDC11Code>
<ProductNDC>11090-282</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>It Cosmetics Your Skin But Better Cc Plus Nude Glow Color Correcting Medium Coverage Skin Tint Brightening Glow Serum Broad Spectrum Spf 40 Sunscreen - Deep</ProprietaryName>
<NonProprietaryName>Octocrylene, Homosalate, Octisalate</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220318</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Beauty Manufacturing Solutions Corp.</LabelerName>
<SubstanceName>HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>83; 45; 56</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220318</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0019-0953-05</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 BOX (0019-0953-05) / 50 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>00019-0953-05</NDC11Code>
<ProductNDC>0019-0953</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Conray</ProprietaryName>
<NonProprietaryName>Iothalamate Meglumine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20031014</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA013295</ApplicationNumber>
<LabelerName>Liebel-Flarsheim Company LLC</LabelerName>
<SubstanceName>IOTHALAMATE MEGLUMINE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20031014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.</IndicationAndUsage>
<Description>Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>0019-0953-10</NDCCode>
<PackageDescription>12 BOTTLE, GLASS in 1 BOX (0019-0953-10) / 100 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>00019-0953-10</NDC11Code>
<ProductNDC>0019-0953</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Conray</ProprietaryName>
<NonProprietaryName>Iothalamate Meglumine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20031014</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA013295</ApplicationNumber>
<LabelerName>Liebel-Flarsheim Company LLC</LabelerName>
<SubstanceName>IOTHALAMATE MEGLUMINE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20031014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.</IndicationAndUsage>
<Description>Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>0019-0953-23</NDCCode>
<PackageDescription>25 VIAL, GLASS in 1 BOX (0019-0953-23) / 30 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>00019-0953-23</NDC11Code>
<ProductNDC>0019-0953</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Conray</ProprietaryName>
<NonProprietaryName>Iothalamate Meglumine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20031014</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA013295</ApplicationNumber>
<LabelerName>Liebel-Flarsheim Company LLC</LabelerName>
<SubstanceName>IOTHALAMATE MEGLUMINE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20031014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.</IndicationAndUsage>
<Description>Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>0019-0953-50</NDCCode>
<PackageDescription>12 BOTTLE, GLASS in 1 BOX (0019-0953-50) / 150 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>00019-0953-50</NDC11Code>
<ProductNDC>0019-0953</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Conray</ProprietaryName>
<NonProprietaryName>Iothalamate Meglumine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20031014</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA013295</ApplicationNumber>
<LabelerName>Liebel-Flarsheim Company LLC</LabelerName>
<SubstanceName>IOTHALAMATE MEGLUMINE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20031014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.</IndicationAndUsage>
<Description>Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>0143-9708-01</NDCCode>
<PackageDescription>50 mL in 1 BOX (0143-9708-01) </PackageDescription>
<NDC11Code>00143-9708-01</NDC11Code>
<ProductNDC>0143-9708</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate</ProprietaryName>
<NonProprietaryName>Milrinone Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20101203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077966</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution.</Description>
</NDC>
<NDC>
<NDCCode>0143-9708-10</NDCCode>
<PackageDescription>10 BOX in 1 BOX (0143-9708-10) / 50 mL in 1 BOX (0143-9708-01) </PackageDescription>
<NDC11Code>00143-9708-10</NDC11Code>
<ProductNDC>0143-9708</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate</ProprietaryName>
<NonProprietaryName>Milrinone Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20101203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077966</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution.</Description>
</NDC>
<NDC>
<NDCCode>0143-9709-01</NDCCode>
<PackageDescription>20 mL in 1 BOX (0143-9709-01) </PackageDescription>
<NDC11Code>00143-9709-01</NDC11Code>
<ProductNDC>0143-9709</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate</ProprietaryName>
<NonProprietaryName>Milrinone Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20101203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077966</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution.</Description>
</NDC>
<NDC>
<NDCCode>0143-9709-10</NDCCode>
<PackageDescription>10 VIAL in 1 BOX (0143-9709-10) / 20 mL in 1 VIAL (0143-9709-01) </PackageDescription>
<NDC11Code>00143-9709-10</NDC11Code>
<ProductNDC>0143-9709</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate</ProprietaryName>
<NonProprietaryName>Milrinone Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20101203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077966</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution.</Description>
</NDC>
<NDC>
<NDCCode>0143-9710-10</NDCCode>
<PackageDescription>10 VIAL in 1 BOX (0143-9710-10) / 10 mL in 1 VIAL (0143-9710-01) </PackageDescription>
<NDC11Code>00143-9710-10</NDC11Code>
<ProductNDC>0143-9710</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate</ProprietaryName>
<NonProprietaryName>Milrinone Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20101203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077966</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution.</Description>
</NDC>
<NDC>
<NDCCode>0143-9710-25</NDCCode>
<PackageDescription>25 VIAL in 1 BOX (0143-9710-25) / 10 mL in 1 VIAL (0143-9710-01) </PackageDescription>
<NDC11Code>00143-9710-25</NDC11Code>
<ProductNDC>0143-9710</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate</ProprietaryName>
<NonProprietaryName>Milrinone Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20101203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077966</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone Lactate Injection, USP and Milrinone Lactate in 5% Dextrose Injection are indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone Lactate is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4´-bipyridine]-5-carbonitrile lactate and has the following structure. CH3CHOHCOOH. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone Lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single dose vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution.</Description>
</NDC>
<NDC>
<NDCCode>0143-9718-10</NDCCode>
<PackageDescription>10 CONTAINER in 1 PACKAGE (0143-9718-10) / 200 mL in 1 CONTAINER (0143-9718-01) </PackageDescription>
<NDC11Code>00143-9718-10</NDC11Code>
<ProductNDC>0143-9718</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate In Dextrose</ProprietaryName>
<NonProprietaryName>Milrinone Lactate In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090038</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone lactate injection is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4’-bipyridine]-5‑carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, Single Dose Vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution.</Description>
</NDC>
<NDC>
<NDCCode>0143-9719-10</NDCCode>
<PackageDescription>10 CONTAINER in 1 PACKAGE (0143-9719-10) / 100 mL in 1 CONTAINER (0143-9719-01) </PackageDescription>
<NDC11Code>00143-9719-10</NDC11Code>
<ProductNDC>0143-9719</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate In Dextrose</ProprietaryName>
<NonProprietaryName>Milrinone Lactate In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090038</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone lactate injection is a member of a class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4’-bipyridine]-5‑carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone lactate is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, Single Dose Vials: Single dose vials of 10, 20 and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose Anhydrous, USP, in Water for Injection, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL. These vials require preparation of dilutions prior to administration to patients intravenously. Pre-Mix Flexible Containers: The Flexible Containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg (0.2 mg) milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 49.4 mg Dextrose Anhydrous, USP. The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide. The flexible plastic container is comprised of polypropylene with a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the pre-mix solution.</Description>
</NDC>
<NDC>
<NDCCode>0228-2850-11</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (0228-2850-11) </PackageDescription>
<NDC11Code>00228-2850-11</NDC11Code>
<ProductNDC>0228-2850</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Guanfacine</ProprietaryName>
<NonProprietaryName>Guanfacine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141201</StartMarketingDate>
<EndMarketingDate>20270531</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200881</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>GUANFACINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20141201</StartMarketingDatePackage>
<EndMarketingDatePackage>20270531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Guanfacine extended-release tablets are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) as monotherapy and as adjunctive therapy to stimulant medications [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Guanfacine Extended-Release is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2, 6-dichlorophenyl) acetamide monohydrochloride. The chemical structure is. C9H9Cl2N3OHCl M.W. 282.55. Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, crospovidone, fumaric acid, glyceryl behenate, hydroxypropyl cellulose, hypromellose, lactose monohydrate, microcrystalline cellulose, and povidone. In addition, the 1 mg and 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and the 3 mg and 4 mg tablets contain D&C Yellow #10 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>0228-2851-11</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (0228-2851-11) </PackageDescription>
<NDC11Code>00228-2851-11</NDC11Code>
<ProductNDC>0228-2851</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Guanfacine</ProprietaryName>
<NonProprietaryName>Guanfacine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141201</StartMarketingDate>
<EndMarketingDate>20270131</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200881</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>GUANFACINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20141201</StartMarketingDatePackage>
<EndMarketingDatePackage>20270131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Guanfacine extended-release tablets are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) as monotherapy and as adjunctive therapy to stimulant medications [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Guanfacine Extended-Release is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2, 6-dichlorophenyl) acetamide monohydrochloride. The chemical structure is. C9H9Cl2N3OHCl M.W. 282.55. Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, crospovidone, fumaric acid, glyceryl behenate, hydroxypropyl cellulose, hypromellose, lactose monohydrate, microcrystalline cellulose, and povidone. In addition, the 1 mg and 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and the 3 mg and 4 mg tablets contain D&C Yellow #10 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>0228-2853-11</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (0228-2853-11) </PackageDescription>
<NDC11Code>00228-2853-11</NDC11Code>
<ProductNDC>0228-2853</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Guanfacine</ProprietaryName>
<NonProprietaryName>Guanfacine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141201</StartMarketingDate>
<EndMarketingDate>20270331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200881</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>GUANFACINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20141201</StartMarketingDatePackage>
<EndMarketingDatePackage>20270331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Guanfacine extended-release tablets are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) as monotherapy and as adjunctive therapy to stimulant medications [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Guanfacine Extended-Release is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2, 6-dichlorophenyl) acetamide monohydrochloride. The chemical structure is. C9H9Cl2N3OHCl M.W. 282.55. Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, crospovidone, fumaric acid, glyceryl behenate, hydroxypropyl cellulose, hypromellose, lactose monohydrate, microcrystalline cellulose, and povidone. In addition, the 1 mg and 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and the 3 mg and 4 mg tablets contain D&C Yellow #10 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>0228-2855-11</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (0228-2855-11) </PackageDescription>
<NDC11Code>00228-2855-11</NDC11Code>
<ProductNDC>0228-2855</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Guanfacine</ProprietaryName>
<NonProprietaryName>Guanfacine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141201</StartMarketingDate>
<EndMarketingDate>20261130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200881</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>GUANFACINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20141201</StartMarketingDatePackage>
<EndMarketingDatePackage>20261130</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Guanfacine extended-release tablets are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) as monotherapy and as adjunctive therapy to stimulant medications [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Guanfacine Extended-Release is a once-daily, extended-release formulation of guanfacine hydrochloride (HCl) in a matrix tablet formulation for oral administration only. The chemical designation is N-amidino-2-(2, 6-dichlorophenyl) acetamide monohydrochloride. The chemical structure is. C9H9Cl2N3OHCl M.W. 282.55. Guanfacine hydrochloride, USP is a white to off-white crystalline powder, sparingly soluble in water (approximately 1 mg/mL) and alcohol and slightly soluble in acetone. The only organic solvent in which it has relatively high solubility is methanol (>30 mg/mL). Each tablet contains guanfacine hydrochloride, USP equivalent to 1 mg, 2 mg, 3 mg, or 4 mg of guanfacine base. The tablets also contain colloidal silicon dioxide, crospovidone, fumaric acid, glyceryl behenate, hydroxypropyl cellulose, hypromellose, lactose monohydrate, microcrystalline cellulose, and povidone. In addition, the 1 mg and 2 mg tablets contain FD&C Yellow #6 Aluminum Lake and the 3 mg and 4 mg tablets contain D&C Yellow #10 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>0338-6010-48</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (0338-6010-48) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-6010-48</NDC11Code>
<ProductNDC>0338-6010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate In Dextrose</ProprietaryName>
<NonProprietaryName>Milrinone Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075834</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone lactate is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4’-bipyridine]-5-carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 - 4.0). The flexible container is manufactured from a specially designed multilayer plastic (PL 2408). Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution.</Description>
</NDC>
<NDC>
<NDCCode>0338-6011-37</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (0338-6011-37) / 200 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-6011-37</NDC11Code>
<ProductNDC>0338-6011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate In Dextrose</ProprietaryName>
<NonProprietaryName>Milrinone Lactate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075834</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone lactate is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4’-bipyridine]-5-carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is slightly soluble in methanol, and very slightly soluble in chloroform and in water. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 - 4.0). The flexible container is manufactured from a specially designed multilayer plastic (PL 2408). Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution.</Description>
</NDC>
<NDC>
<NDCCode>0362-1098-90</NDCCode>
<PackageDescription>5 BLISTER PACK in 1 CARTON (0362-1098-90) / 10 CARTRIDGE in 1 BLISTER PACK / 1.7 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>00362-1098-90</NDC11Code>
<ProductNDC>0362-1098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scandonest 3% Plain</ProprietaryName>
<NonProprietaryName>Mepivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20171222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088387</ApplicationNumber>
<LabelerName>Septodont, Inc.</LabelerName>
<SubstanceName>MEPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mepivacaine is indicated for production of local anesthesia for dental procedures by infiltration or nerve block in adults and pediatric patients.</IndicationAndUsage>
<Description>Mepivacaine Hydrochloride, a tertiary amine used as a local anesthetic, is 1-methyl-2', 6' - pipecoloxylidide monohydrochloride with the following structural formula. C15H22N2O HCI M.W. 282.81. It is a white, crystalline, odorless powder soluble in water, but very resistant to both acid and alkaline hydrolysis. DENTAL CARTRIDGES MAY NOT BE AUTOCLAVED.SCANDONEST® 3% Plain (mepivacaine hydrochloride injection 3% (51 mg/1.7 mL) (30 mg/mL)) is a sterile solution for injection.</Description>
</NDC>
<NDC>
<NDCCode>0409-1983-10</NDCCode>
<PackageDescription>10 POUCH in 1 CARTON (0409-1983-10) > 1 BAG in 1 POUCH (0409-1983-01) > 200 mL in 1 BAG</PackageDescription>
<NDC11Code>00409-1983-10</NDC11Code>
<ProductNDC>0409-1983</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate In Dextrose</ProprietaryName>
<NonProprietaryName>Milrinone Lactate In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20211004</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213585</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-03-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone lactate is a member of a new class of bipyridine is inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is freely soluble in dimethyl sulfoxide, very slightly soluble in methanol, practically insoluble in water and in chloroform. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 - 4.0). The flexible container is manufactured from a specially designed multilayer plastic. Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution.</Description>
</NDC>
<NDC>
<NDCCode>0409-2045-10</NDCCode>
<PackageDescription>10 POUCH in 1 CARTON (0409-2045-10) > 1 BAG in 1 POUCH (0409-2045-01) > 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00409-2045-10</NDC11Code>
<ProductNDC>0409-2045</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milrinone Lactate In Dextrose</ProprietaryName>
<NonProprietaryName>Milrinone Lactate In Dextrose</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220404</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213585</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MILRINONE LACTATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220404</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Milrinone is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
<Description>Milrinone lactate is a member of a new class of bipyridine is inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is freely soluble in dimethyl sulfoxide, very slightly soluble in methanol, practically insoluble in water and in chloroform. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 - 4.0). The flexible container is manufactured from a specially designed multilayer plastic. Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution.</Description>
</NDC>
<NDC>
<NDCCode>0456-1500-55</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (0456-1500-55) / 1 KIT in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00456-1500-55</NDC11Code>
<ProductNDC>0456-1500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<EndMarketingDate>20270831</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20090417</StartMarketingDatePackage>
<EndMarketingDatePackage>20270831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0456-1510-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0456-1510-60) </PackageDescription>
<NDC11Code>00456-1510-60</NDC11Code>
<ProductNDC>0456-1510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0456-1512-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0456-1512-60) </PackageDescription>
<NDC11Code>00456-1512-60</NDC11Code>
<ProductNDC>0456-1512</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0456-1525-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0456-1525-60) </PackageDescription>
<NDC11Code>00456-1525-60</NDC11Code>
<ProductNDC>0456-1525</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0456-1550-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0456-1550-60) </PackageDescription>
<NDC11Code>00456-1550-60</NDC11Code>
<ProductNDC>0456-1550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0456-2200-07</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (0456-2200-07) / 1 KIT in 1 BLISTER PACK (0456-2200-65) * 2 CAPSULE, EXTENDED RELEASE in 1 BLISTER PACK (0456-2220-00) * 5 CAPSULE, EXTENDED RELEASE in 1 BLISTER PACK (0456-2240-00) </PackageDescription>
<NDC11Code>00456-2200-07</NDC11Code>
<ProductNDC>0456-2200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fetzima</ProprietaryName>
<NonProprietaryName>Levomilnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230324</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204168</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230324</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>FETZIMA® is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)]. Limitation of Use: FETZIMA is not approved for the management of fibromyalgia. The efficacy and safety of FETZIMA for the management of fibromyalgia have not been established.</IndicationAndUsage>
<Description>FETZIMA contains levomilnacipran, a selective serotonin and norepinephrine reuptake inhibitor (SNRI), in the form of hydrochloride salt with the chemical name of levomilnacipran hydrochloride is (1S,2R)-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. Its empirical formula is C15H22N2O∙HCl and its molecular weight is 282.8 g/mol. Levomilnacipran (Initial US approval: 2013) is the 1S,2R-enantiomer of milnacipran. The chemical structure of levomilnacipran hydrochloride is. FETZIMA extended-release capsules are intended for oral administration. Each FETZIMA capsule contains 23.0, 45.9, 91.8, or 137.8 mg of levomilnacipran hydrochloride equivalent to 20, 40, 80, or 120 mg of levomilnacipran, respectively. Inactive ingredients include ethylcellulose, hypromellose, povidone, sugar spheres, talc, titanium dioxide, and triethyl citrate. Inactive ingredients also include black iron oxide, red iron oxide (80 mg and 120 mg capsules only), shellac glaze, and yellow iron oxide (20 mg and 40 mg capsules only).</Description>
</NDC>
<NDC>
<NDCCode>0456-2202-28</NDCCode>
<PackageDescription>1 KIT in 1 BLISTER PACK (0456-2202-28) </PackageDescription>
<NDC11Code>00456-2202-28</NDC11Code>
<ProductNDC>0456-2202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fetzima</ProprietaryName>
<NonProprietaryName>Levomilnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130725</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204168</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FETZIMA® is indicated for the treatment of major depressive disorder (MDD) in adults [see Clinical Studies (14)]. Limitation of Use: FETZIMA is not approved for the management of fibromyalgia. The efficacy and safety of FETZIMA for the management of fibromyalgia have not been established.</IndicationAndUsage>
<Description>FETZIMA contains levomilnacipran, a selective serotonin and norepinephrine reuptake inhibitor (SNRI), in the form of hydrochloride salt with the chemical name of levomilnacipran hydrochloride is (1S,2R)-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. Its empirical formula is C15H22N2O∙HCl and its molecular weight is 282.8 g/mol. Levomilnacipran (Initial US approval: 2013) is the 1S,2R-enantiomer of milnacipran. The chemical structure of levomilnacipran hydrochloride is. FETZIMA extended-release capsules are intended for oral administration. Each FETZIMA capsule contains 23.0, 45.9, 91.8, or 137.8 mg of levomilnacipran hydrochloride equivalent to 20, 40, 80, or 120 mg of levomilnacipran, respectively. Inactive ingredients include ethylcellulose, hypromellose, povidone, sugar spheres, talc, titanium dioxide, and triethyl citrate. Inactive ingredients also include black iron oxide, red iron oxide (80 mg and 120 mg capsules only), shellac glaze, and yellow iron oxide (20 mg and 40 mg capsules only).</Description>
</NDC>
</NDCList>