{
"NDC": [
{
"NDCCode": "52959-336-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-90)",
"NDC11Code": "52959-0336-90",
"ProductNDC": "52959-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone."
},
{
"NDCCode": "52959-336-14",
"PackageDescription": "14 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-14)",
"NDC11Code": "52959-0336-14",
"ProductNDC": "52959-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone."
},
{
"NDCCode": "52959-336-20",
"PackageDescription": "20 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-20)",
"NDC11Code": "52959-0336-20",
"ProductNDC": "52959-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone."
},
{
"NDCCode": "52959-336-28",
"PackageDescription": "28 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-28)",
"NDC11Code": "52959-0336-28",
"ProductNDC": "52959-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone."
},
{
"NDCCode": "52959-336-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-30)",
"NDC11Code": "52959-0336-30",
"ProductNDC": "52959-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone."
},
{
"NDCCode": "52959-336-40",
"PackageDescription": "40 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-40)",
"NDC11Code": "52959-0336-40",
"ProductNDC": "52959-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone."
},
{
"NDCCode": "52959-336-56",
"PackageDescription": "56 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-56)",
"NDC11Code": "52959-0336-56",
"ProductNDC": "52959-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100323",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone."
},
{
"NDCCode": "33261-336-90",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (33261-336-90)",
"NDC11Code": "33261-0336-90",
"ProductNDC": "33261-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propranolol Hydrochloride",
"NonProprietaryName": "Propranolol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20081013",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078955",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "PROPRANOLOL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.",
"Description": "hydrochloride(Propranolol is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It’s molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake."
},
{
"NDCCode": "42571-336-90",
"PackageDescription": "90 BOTTLE in 1 CARTON (42571-336-90) / 90 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "42571-0336-90",
"ProductNDC": "42571-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pirfenidone",
"NonProprietaryName": "Pirfenidone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20221201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212680",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "PIRFENIDONE",
"StrengthNumber": "801",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Pyridone [EPC], Pyridones [CS]",
"Status": "Active",
"LastUpdate": "2025-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221201",
"SamplePackage": "N",
"IndicationAndUsage": "Pirfenidone tablet is indicated for the treatment of idiopathic pulmonary fibrosis (IPF).",
"Description": "Pirfenidone tablets belong to the chemical class of pyridone. Pirfenidone tablets are available as film-coated tablets containing 267 mg (yellow) and 801 mg (brown) pirfenidone. Pirfenidone has a molecular formula of C 12H 11NO and a molecular weight of 185.23. Pirfenidone has the following structural formula, which has been referred to as 5-methyl-1-phenyl-2-1(H)-pyridone or 5-methyl-1-phenyl-2-(1H)-pyridone. Pirfenidone is a white to pale yellow crystalline powder. It is freely soluble in ethanol (96%), sparing soluble in water and very slightly soluble in heptane. The melting point is approximately 110.1°C to 110.2°C. Pirfenidone tablets contain pirfenidone and the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate dihydrate, sodium starch glycolate type A, polysorbate 80, maize starch B, sodium stearyl fumarate, polyvinyl alcohol, polyethylene glycol 3350, ferrosoferric oxide, iron oxide yellow (267 mg), iron oxide red (801 mg), talc and titanium dioxide."
},
{
"NDCCode": "43353-336-60",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (43353-336-60)",
"NDC11Code": "43353-0336-60",
"ProductNDC": "43353-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Synthroid",
"NonProprietaryName": "Levothyroxine Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020724",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021402",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "LEVOTHYROXINE SODIUM",
"StrengthNumber": "137",
"StrengthUnit": "ug/1",
"Pharm_Classes": "l-Thyroxine [EPC],Thyroxine [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Hypothyroidism. SYNTHROID is indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid‑Stimulating Hormone, TSH) Suppression. SYNTHROID is indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. : 1 Limitations of Use:.",
"Description": "SYNTHROID (levothyroxine sodium tablets, USP) contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 (anhydrous), and structural formula as shown. SYNTHROID tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each SYNTHROID tablet contains the inactive ingredients acacia, confectioner's sugar (contains corn starch), lactose monohydrate, magnesium stearate, povidone, and talc. Each tablet strength meets USP Dissolution Test 3. Table 6 provides a listing of the color additives by tablet strength."
},
{
"NDCCode": "52125-336-19",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (52125-336-19) ",
"NDC11Code": "52125-0336-19",
"ProductNDC": "52125-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enalapril Maleate",
"NonProprietaryName": "Enalapril Maleate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075480",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "ENALAPRIL MALEATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-11-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20121129",
"SamplePackage": "N"
},
{
"NDCCode": "58980-336-90",
"PackageDescription": "1 BOTTLE in 1 BOX (58980-336-90) > 473 mL in 1 BOTTLE",
"NDC11Code": "58980-0336-90",
"ProductNDC": "58980-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zencia Wash",
"NonProprietaryName": "Sulfacetamide Sodium And Sulfur",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100810",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Stratus Pharamceuticals, Inc",
"SubstanceName": "SULFACETAMIDE SODIUM; SULFUR",
"StrengthNumber": "90; 40",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Sulfonamide Antibacterial [EPC],Sulfonamides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-11-22"
},
{
"NDCCode": "61786-336-19",
"PackageDescription": "90 TABLET, COATED in 1 BOTTLE (61786-336-19) ",
"NDC11Code": "61786-0336-19",
"ProductNDC": "61786-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benazepril Hydrochloride",
"NonProprietaryName": "Benazepril Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076118",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "BENAZEPRIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-11-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20150615",
"SamplePackage": "N"
},
{
"NDCCode": "62135-336-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (62135-336-90) ",
"NDC11Code": "62135-0336-90",
"ProductNDC": "62135-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diltiazem Hydrochloride",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19921105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074093",
"LabelerName": "Chartwell RX, LLC",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-06-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240617",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem hydrochloride is indicated for the management of chronic stable angina and angina due to coronary artery spasm.",
"Description": "Diltiazem Hydrochloride, USP is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, Diltiazem Hydrochloride, USP is 1,5-Benzothiazepin-4(5 H)-one, 3- (acetyloxy)-5-[2-(dimethylamino)ethyl] -2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride,(+)- cis-. The chemical structure is:. C 22H 26N 2O 4S.HCl M.W. 450.98. Diltiazem Hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Each tablet for oral administration contains 30 mg, 60 mg, 90 mg, or 120 mg Diltiazem Hydrochloride, USP equivalent to 27.6, 55.2, 82.8 or 110.4 mg of diltiazem, respectively. Inactive Ingredients, hydroxypropyl methylcellulose, lactose anhydrous, lactose monohydrate, eudragit RS 30D, magnesium stearate, microcrystalline cellulose, polyethylene glycol 6000, polysorbate 80, povidone K30, and triethyl citrate."
},
{
"NDCCode": "64009-336-90",
"PackageDescription": "208.2 L in 1 CONTAINER (64009-336-90) ",
"NDC11Code": "64009-0336-90",
"ProductNDC": "64009-336",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Antiseptic Hand Cleaner",
"NonProprietaryName": "Chloroxylenol",
"DosageFormName": "SOAP",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150105",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Spartan Chemical Company, Inc.",
"SubstanceName": "CHLOROXYLENOL",
"StrengthNumber": "10.11",
"StrengthUnit": "g/L",
"Status": "Active",
"LastUpdate": "2025-10-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150115",
"SamplePackage": "N",
"IndicationAndUsage": "For hand washing to decrease bacteria on the skin. . Recommended for repeated use. ."
},
{
"NDCCode": "68382-336-16",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-336-16) ",
"NDC11Code": "68382-0336-16",
"ProductNDC": "68382-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glipizide",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203499",
"LabelerName": "Zydus Pharmaceuticals USA Inc.",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180725",
"SamplePackage": "N",
"IndicationAndUsage": "Glipizide extended-release tablets is a sulfonylurea indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus Limitations of Use: Not for treatment of type 1 diabetes or diabetic ketoacidosis.",
"Description": "Glipizide extended-release tablets are an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide, USP is a white to off-white powder, with a pKa of 5.9. It is freely soluble in dimethylformamide, soluble in 0.1N sodium hydroxide and slightly soluble in methylene chloride. Glipizide extended-release tablets are formulated as a once-a-day extended-release tablet for oral use and are designed to deliver 2.5 mg, 5 mg, or 10 mg of glipizide. Each glipizide extended-release tablet contains the following inactive ingredients: acetyltributyl citrate, colloidal silicon dioxide, hydroxyethyl cellulose, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer and polyethylene glycol. Additionally each 2.5 mg tablet contains: FD&C yellow #5 aluminum lake and titanium dioxide. Each 5 mg tablet contains: FD&C yellow #6 aluminum lake and titanium dioxide. The tablet is imprinted with opacode black S-1-17823 which contains following ingredients: ammonium hydroxide, iron oxide black, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac. System Components and Performance. Glipizide extended-release tablets are formulated as once-a-day extended-release tablets and are designed to deliver glipizide at a controlled rate over approximately 20 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet containing the drug which is surrounded by a seal coat followed by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters in the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases the drug at a controlled rate via diffusion and/or erosion."
},
{
"NDCCode": "70934-336-90",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE, PLASTIC (70934-336-90) ",
"NDC11Code": "70934-0336-90",
"ProductNDC": "70934-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190418",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076515",
"LabelerName": "Denton Pharma, Inc. dba Northwind Pharmaceuticals",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20190418",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults ( 1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults ( 1.2) , 3 Treatment of active benign gastric ulcer in adults ( 1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 2 years of age and older ( 1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) , 7 Pathologic hypersecretory conditions in adults ( 1.7) .",
"Description": "The active ingredient in omeprazole delayed-release capsule, USP is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1 H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C 17H 19N 3O 3S, with a molecular weight of 345.42. The structural formula is:. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. The Dissolution test to be performed according to USP Test 2. Omeprazole is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole in the form of enteric-coated granules. The 10 mg and 20 mg capsule contains the following inactive ingredients: anhydrous lactose, low-substituted hydroxypropyl cellulose, magnesium oxide, magnesium stearate, microcrystalline cellulose, methacrylic acid copolymer dispersion type C, polysorbate 80, povidone and talc, triethyl citrate. The capsule shells for the 10 mg have the following inactive ingredients: black iron oxide, gelatin, red iron oxide, titanium dioxide and yellow iron oxide. The capsule shells for the 20 mg have the following inactive ingredients: gelatin and titanium dioxide. The ink used for printing contains: black iron oxide, propylene glycol and shellac. The 40 mg capsule contains the following inactive ingredients: acetone, anhydrous lactose, croscarmellose sodium, dehydrated alcohol, dibutyl sebacate, hypromellose phthalate, low-substituted hydroxypropyl cellulose, microcrystalline cellulose, polysorbate 80, povidone and talc. The capsule shells for the 40 mg have the following inactive ingredients: hypromellose, red iron oxide, titanium dioxide, and yellow iron oxide. In addition, the capsule shells may also contain black iron oxide, carrageenan, and potassium chloride. The ink used for printing contains black iron oxide."
},
{
"NDCCode": "71205-336-90",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (71205-336-90) ",
"NDC11Code": "71205-0336-90",
"ProductNDC": "71205-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204106",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2020-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191001",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol succinate, is a beta1-selective adrenoceptor blocking agent. Metoprolol succinate extended-release tablets, USP are indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Angina Pectoris. (1.2), 3 Heart Failure - for the treatment of stable, symptomatic (NYHA Class II or III) heart failure of ischemic, hypertensive, or cardiomyopathic origin. (1.3).",
"Description": "Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1- (isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: sugar spheres, povidone, ethyl cellulose, polyethylene glycol, hydroxypropyl cellulose, triethyl citrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, polydextrose, hypromellose, and triacetin."
},
{
"NDCCode": "71610-336-60",
"PackageDescription": "90 TABLET in 1 BOTTLE (71610-336-60) ",
"NDC11Code": "71610-0336-60",
"ProductNDC": "71610-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carbamazepine",
"NonProprietaryName": "Carbamazepine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19961003",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074649",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "CARBAMAZEPINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190815",
"SamplePackage": "N",
"IndicationAndUsage": "Carbamazepine is indicated for use as an anticonvulsant drug. Evidence supporting efficacy of carbamazepine as an anticonvulsant was derived from active drug-controlled studies that enrolled patients with the following seizure types: 1 Partial seizures with complex symptomatology (psychomotor, temporal lobe). Patients with these seizures appear to show greater improvement than those with other types., 2 Generalized tonic-clonic seizures (grand mal)., 3 Mixed seizure patterns which include the above, or other partial or generalized seizures. Absence seizures (petit mal) do not appear to be controlled by carbamazepine (see PRECAUTIONS, General). .",
"Description": "Carbamazepine USP, is an anticonvulsant and specific analgesic for trigeminal neuralgia, available for oral administration as tablets of 200 mg. Its chemical name is 5 H-dibenz[ b,f]azepine-5-carboxamide, and its structural formula is:. C 15H 12N 2O. Carbamazepine USP is a white to off-white powder, practically insoluble in water and soluble in alcohol and in acetone. Its molecular weight is 236.27. Inactive Ingredients: Carbamazepine Tablets USP, 200 mg – ammonio methacrylate copolymer, corn starch, croscarmellose sodium, diethyl phthalate, magnesium stearate and microcrystalline cellulose."
},
{
"NDCCode": "52959-002-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (52959-002-90) ",
"NDC11Code": "52959-0002-90",
"ProductNDC": "52959-002",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Acetaminophen",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20011008",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part343",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20011008",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains. temporarily reduces fever."
},
{
"NDCCode": "52959-003-90",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (52959-003-90) ",
"NDC11Code": "52959-0003-90",
"ProductNDC": "52959-003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19880930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089805",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "CODEINE PHOSPHATE; ACETAMINOPHEN",
"StrengthNumber": "30; 300",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19880930",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the relief of mild to moderately severe pain.",
"Description": "Acetaminophen and codeine is supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. Each 300 mg/30 mg Acetaminophen and Codeine Phosphate Tablet contains: Acetaminophen ......................................................................................................300 mg Codeine Phosphate ..................................................................................................30 mg."
},
{
"NDCCode": "52959-008-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (52959-008-90)",
"NDC11Code": "52959-0008-90",
"ProductNDC": "52959-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19771121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085969",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline HCl, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake."
},
{
"NDCCode": "52959-009-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (52959-009-90)",
"NDC11Code": "52959-0009-90",
"ProductNDC": "52959-009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonazepam",
"NonProprietaryName": "Clonazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074869",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "CLONAZEPAM",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Seizure Disorders: Clonazepam tablets, USP are useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam may be useful. In some studies, up to 30% of patients have shown a loss of anticonvulsant activity, often within 3 months of administration. In some cases, dosage adjustment may reestablish efficacy. Panic Disorder: Clonazepam tablets, USP are indicated for the treatment of panic disorder, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of clonazepam was established in two 6- to 9-week trials in panic disorder patients whose diagnoses corresponded to the DSM-IIIR category of panic disorder (see CLlNICAL PHARMACOLOGY: Clinical Trials). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The effectiveness of clonazepam in long-term use, that is, for more than 9 weeks, has not been systematically studied in controlled clinical trials. The physician who elects to use clonazepam for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).",
"Description": "Clonazepam, USP a benzodiazepine, is available for oral administration as scored tablets containing 0.5 mg, 1 mg or 2 mg of clonazepam. In addition, each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 0.5 mg tablet also contains D&C Red #30 aluminum lake. The 1 mg tablet also contains D&C Yellow #10HT aluminum lake. Chemically, clonazepam is 5-(o-Chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has a molecular weight of 315.72 and the following structural formula."
},
{
"NDCCode": "52959-026-90",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (52959-026-90)",
"NDC11Code": "52959-0026-90",
"ProductNDC": "52959-026",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carisoprodol",
"NonProprietaryName": "Carisoprodol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19960124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040124",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "CARISOPRODOL",
"StrengthNumber": "350",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Carisoprodol Tablets, USP are indicated for the relief of discomfort associated with acute, painful musculoskeletal conditions in adults. Carisoprodol Tablets should only be used for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use has not been established and because acute, painful musculoskeletal conditions are generally of short duration. [see DOSAGE AND ADMINISTRATION (2)].",
"Description": "Carisoprodol Tablets are available as 350 mg round, white tablets. Carisoprodol is a white, crystalline powder, having a mild, characteristic odor and a bitter taste. It is slightly soluble in water; freely soluble in alcohol, in chloroform, and in acetone; and its solubility is practically independent of pH. Carisoprodol is present as a racemic mixture. Chemically, carisoprodol is N-isopropyl-2-methyl-2-propyl-1,3-propanediol dicarbamate and the molecular formula is C12H24N2O4, with a molecular weight of 260.33. The structural formula is. Other Ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, methylcellulose, povidone, sodium lauryl sulfate, sodium starch glycolate, and stearic acid."
},
{
"NDCCode": "52959-033-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (52959-033-90)",
"NDC11Code": "52959-0033-90",
"ProductNDC": "52959-033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Meclizine Hydrochloride",
"NonProprietaryName": "Meclizine Hydrocloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100604",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040659",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC],Emesis Suppression [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "For the management of nausea and vomiting, and dizziness associated with motion sickness.",
"Description": "Chemically, Meclizine HCl is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. C25H27ClN2. 2HCl. H2O M.W. 481.88Meclizine HCI Tablets, USP are available in two different strengths: 12.5 mg and 25 mg. In addition each tablet contains the following inactive ingredients: Colloidal Silicon Dioxide, Croscarmellose Sodium, Lactose Monohydrate, Magnesium Stearate, Microcrystalline Cellulose. Also, Meclizine HCI Tablets USP, 12.5 mg contains FD&C Blue #1 Aluminum Lake (11-13%) and Meclizine HCI Tablets USP, 25 mg contains D&C Yellow #10 Aluminum Lake (15-20%)."
},
{
"NDCCode": "52959-042-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 CONTAINER (52959-042-90)",
"NDC11Code": "52959-0042-90",
"ProductNDC": "52959-042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077797",
"LabelerName": "H. J Harkins Company Inc",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-28",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80)."
},
{
"NDCCode": "52959-047-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (52959-047-90) ",
"NDC11Code": "52959-0047-90",
"ProductNDC": "52959-047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071135",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20160125",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam Tablets USP are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; and stiff-man syndrome. Oral diazepam may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The empirical formula is C16H13ClN2O and the molecular weight is 284.75. The structural formula is as follows. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: anhydrous lactose, magnesium stearate and microcrystalline cellulose. Diazepam Tablets USP 5 mg also contain D&C Yellow No. 10. Diazepam Tablets USP 10 mg also contain FD&C Blue No. 1."
},
{
"NDCCode": "52959-055-90",
"PackageDescription": "90 CAPSULE in 1 BOTTLE, PLASTIC (52959-055-90)",
"NDC11Code": "52959-0055-90",
"ProductNDC": "52959-055",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19841107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062396",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline hyclate is a broad-spectrum antibiotic synthetically derived from oxytetracycline. The structural formula is as follows. with a molecular formula of C22H24N2O8H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. Doxycycline is a light yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. 100 mg gelatin capsule shell contains: FD&C Blue #1, silicon dioxide, sodium lauryl sulfate and titanium dioxide. The printing ink contains: D&C Yellow #10, FD&C Blue #1, FD&C Blue #2, FD&C Red #40, n-Butyl Alcohol, Pharmaceutical Glaze, Propylene Glycol, SDA-3A Alcohol and Synthetic Black Iron Oxide."
},
{
"NDCCode": "52959-074-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (52959-074-90)",
"NDC11Code": "52959-0074-90",
"ProductNDC": "52959-074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040804",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "HYDROXYZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses, and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydrOXYzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. HydrOXYzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydrOXYzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "HydrOXYzine hydrochloride has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. HydrOXYzine hydrochloride occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydrOXYzine HCI. Inactive ingredients include: lactose monohydrate, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, stearic acid, polyethylene glycol, polysorbate 80, and titanium dioxide."
},
{
"NDCCode": "52959-076-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (52959-076-90)",
"NDC11Code": "52959-0076-90",
"ProductNDC": "52959-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091123",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078558",
"LabelerName": "H.J. Harkins Company, Inc.",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of Ibuprofen Tablets, USP and other treatment options before deciding to use Ibuprofen Tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen Tablets, USP are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen Tablets, USP are indicated for relief of mild to moderate pain. Ibuprofen Tablets, USP are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen Tablets, USP in children have not been conducted.",
"Description": "Ibuprofen Tablets, USP contain the active ingredient ibuprofen, which is (±) – 2 – (p – isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77° C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen Tablets, USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch, talc, stearic acid, and titanium dioxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>52959-336-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-90)</PackageDescription>
<NDC11Code>52959-0336-90</NDC11Code>
<ProductNDC>52959-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>52959-336-14</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-14)</PackageDescription>
<NDC11Code>52959-0336-14</NDC11Code>
<ProductNDC>52959-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>52959-336-20</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-20)</PackageDescription>
<NDC11Code>52959-0336-20</NDC11Code>
<ProductNDC>52959-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>52959-336-28</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-28)</PackageDescription>
<NDC11Code>52959-0336-28</NDC11Code>
<ProductNDC>52959-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>52959-336-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-30)</PackageDescription>
<NDC11Code>52959-0336-30</NDC11Code>
<ProductNDC>52959-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>52959-336-40</NDCCode>
<PackageDescription>40 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-40)</PackageDescription>
<NDC11Code>52959-0336-40</NDC11Code>
<ProductNDC>52959-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>52959-336-56</NDCCode>
<PackageDescription>56 CAPSULE in 1 BOTTLE, PLASTIC (52959-336-56)</PackageDescription>
<NDC11Code>52959-0336-56</NDC11Code>
<ProductNDC>52959-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100323</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride, and has the following inactive ingredients: colloidal silicon dioxide, D&C Yellow #10, gelatin, pregelatinized starch, propylene glycol, shellac glaze (modified), stearic acid, and titanium dioxide. The 250 mg capsules also contain black iron oxide, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, and FD&C Yellow #6. The 500 mg capsules also contain ammonium hydroxide, FD&C Blue #1, FD&C Red #40, and simethicone.</Description>
</NDC>
<NDC>
<NDCCode>33261-336-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (33261-336-90)</PackageDescription>
<NDC11Code>33261-0336-90</NDC11Code>
<ProductNDC>33261-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
<NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081013</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078955</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propranolol hydrochloride tablets are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets are not indicated in the management of hypertensive emergencies.</IndicationAndUsage>
<Description>hydrochloride(Propranolol is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. It’s molecular and structural formulae are. C16H21NO2.HCl. Propranolol hydrochloride is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Its molecular weight is 295.80. Propranolol hydrochloride tablets, USP are available as 10 mg, 20 mg, 40 mg, 60 mg, and 80 mg tablets for oral administration. The inactive ingredients contained in propranolol hydrochloride tablets, USP are: lactose monohydrate, corn starch, sodium starch glycolate, magnesium stearate, and povidone. In addition, propranolol hydrochloride tablets, USP 10 mg, 40 mg and 80 mg contain FD &C yellow No.6 Aluminium Lake and Color D&C Yellow No. 10; propranolol hydrochloride tablets, USP 20 mg and 40mg contain FD&C Blue No.1 and propranolol hydrochloride tablets, USP 60 mg contain D&C Red No. 30 Lake.</Description>
</NDC>
<NDC>
<NDCCode>42571-336-90</NDCCode>
<PackageDescription>90 BOTTLE in 1 CARTON (42571-336-90) / 90 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>42571-0336-90</NDC11Code>
<ProductNDC>42571-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pirfenidone</ProprietaryName>
<NonProprietaryName>Pirfenidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212680</ApplicationNumber>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>PIRFENIDONE</SubstanceName>
<StrengthNumber>801</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Pyridone [EPC], Pyridones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pirfenidone tablet is indicated for the treatment of idiopathic pulmonary fibrosis (IPF).</IndicationAndUsage>
<Description>Pirfenidone tablets belong to the chemical class of pyridone. Pirfenidone tablets are available as film-coated tablets containing 267 mg (yellow) and 801 mg (brown) pirfenidone. Pirfenidone has a molecular formula of C 12H 11NO and a molecular weight of 185.23. Pirfenidone has the following structural formula, which has been referred to as 5-methyl-1-phenyl-2-1(H)-pyridone or 5-methyl-1-phenyl-2-(1H)-pyridone. Pirfenidone is a white to pale yellow crystalline powder. It is freely soluble in ethanol (96%), sparing soluble in water and very slightly soluble in heptane. The melting point is approximately 110.1°C to 110.2°C. Pirfenidone tablets contain pirfenidone and the following inactive ingredients: colloidal silicon dioxide, dibasic calcium phosphate dihydrate, sodium starch glycolate type A, polysorbate 80, maize starch B, sodium stearyl fumarate, polyvinyl alcohol, polyethylene glycol 3350, ferrosoferric oxide, iron oxide yellow (267 mg), iron oxide red (801 mg), talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43353-336-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (43353-336-60)</PackageDescription>
<NDC11Code>43353-0336-60</NDC11Code>
<ProductNDC>43353-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Synthroid</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020724</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021402</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM</SubstanceName>
<StrengthNumber>137</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>l-Thyroxine [EPC],Thyroxine [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypothyroidism. SYNTHROID is indicated as a replacement therapy in primary (thyroidal), secondary (pituitary), and tertiary (hypothalamic) congenital or acquired hypothyroidism. Pituitary Thyrotropin (Thyroid‑Stimulating Hormone, TSH) Suppression. SYNTHROID is indicated as an adjunct to surgery and radioiodine therapy in the management of thyrotropin-dependent well-differentiated thyroid cancer. : 1 Limitations of Use:.</IndicationAndUsage>
<Description>SYNTHROID (levothyroxine sodium tablets, USP) contain synthetic crystalline L-3,3',5,5'-tetraiodothyronine sodium salt [levothyroxine (T4) sodium]. Synthetic T4 is chemically identical to that produced in the human thyroid gland. Levothyroxine (T4) sodium has an empirical formula of C15H10I4N NaO4 H2O, molecular weight of 798.86 (anhydrous), and structural formula as shown. SYNTHROID tablets for oral administration are supplied in the following strengths: 25 mcg, 50 mcg, 75 mcg, 88 mcg, 100 mcg, 112 mcg, 125 mcg, 137 mcg, 150 mcg, 175 mcg, 200 mcg, and 300 mcg. Each SYNTHROID tablet contains the inactive ingredients acacia, confectioner's sugar (contains corn starch), lactose monohydrate, magnesium stearate, povidone, and talc. Each tablet strength meets USP Dissolution Test 3. Table 6 provides a listing of the color additives by tablet strength.</Description>
</NDC>
<NDC>
<NDCCode>52125-336-19</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (52125-336-19) </PackageDescription>
<NDC11Code>52125-0336-19</NDC11Code>
<ProductNDC>52125-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enalapril Maleate</ProprietaryName>
<NonProprietaryName>Enalapril Maleate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075480</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>ENALAPRIL MALEATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58980-336-90</NDCCode>
<PackageDescription>1 BOTTLE in 1 BOX (58980-336-90) > 473 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>58980-0336-90</NDC11Code>
<ProductNDC>58980-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zencia Wash</ProprietaryName>
<NonProprietaryName>Sulfacetamide Sodium And Sulfur</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100810</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Stratus Pharamceuticals, Inc</LabelerName>
<SubstanceName>SULFACETAMIDE SODIUM; SULFUR</SubstanceName>
<StrengthNumber>90; 40</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Sulfonamide Antibacterial [EPC],Sulfonamides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-11-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>61786-336-19</NDCCode>
<PackageDescription>90 TABLET, COATED in 1 BOTTLE (61786-336-19) </PackageDescription>
<NDC11Code>61786-0336-19</NDC11Code>
<ProductNDC>61786-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benazepril Hydrochloride</ProprietaryName>
<NonProprietaryName>Benazepril Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076118</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>BENAZEPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>62135-336-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (62135-336-90) </PackageDescription>
<NDC11Code>62135-0336-90</NDC11Code>
<ProductNDC>62135-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diltiazem Hydrochloride</ProprietaryName>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19921105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074093</ApplicationNumber>
<LabelerName>Chartwell RX, LLC</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem hydrochloride is indicated for the management of chronic stable angina and angina due to coronary artery spasm.</IndicationAndUsage>
<Description>Diltiazem Hydrochloride, USP is a calcium ion cellular influx inhibitor (slow channel blocker or calcium antagonist). Chemically, Diltiazem Hydrochloride, USP is 1,5-Benzothiazepin-4(5 H)-one, 3- (acetyloxy)-5-[2-(dimethylamino)ethyl] -2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride,(+)- cis-. The chemical structure is:. C 22H 26N 2O 4S.HCl M.W. 450.98. Diltiazem Hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol, and chloroform. Each tablet for oral administration contains 30 mg, 60 mg, 90 mg, or 120 mg Diltiazem Hydrochloride, USP equivalent to 27.6, 55.2, 82.8 or 110.4 mg of diltiazem, respectively. Inactive Ingredients, hydroxypropyl methylcellulose, lactose anhydrous, lactose monohydrate, eudragit RS 30D, magnesium stearate, microcrystalline cellulose, polyethylene glycol 6000, polysorbate 80, povidone K30, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>64009-336-90</NDCCode>
<PackageDescription>208.2 L in 1 CONTAINER (64009-336-90) </PackageDescription>
<NDC11Code>64009-0336-90</NDC11Code>
<ProductNDC>64009-336</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Antiseptic Hand Cleaner</ProprietaryName>
<NonProprietaryName>Chloroxylenol</NonProprietaryName>
<DosageFormName>SOAP</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150105</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Spartan Chemical Company, Inc.</LabelerName>
<SubstanceName>CHLOROXYLENOL</SubstanceName>
<StrengthNumber>10.11</StrengthNumber>
<StrengthUnit>g/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-10-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For hand washing to decrease bacteria on the skin. . Recommended for repeated use. .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68382-336-16</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-336-16) </PackageDescription>
<NDC11Code>68382-0336-16</NDC11Code>
<ProductNDC>68382-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glipizide</ProprietaryName>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203499</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glipizide extended-release tablets is a sulfonylurea indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus Limitations of Use: Not for treatment of type 1 diabetes or diabetic ketoacidosis.</IndicationAndUsage>
<Description>Glipizide extended-release tablets are an oral sulfonylurea. The Chemical Abstracts name of glipizide is 1-cyclohexyl-3-[[p-[2-(5-methylpyrazinecarboxamido) ethyl] phenyl]sulfonyl]urea. The molecular formula is C21H27N5O4S; the molecular weight is 445.55; the structural formula is shown below. Glipizide, USP is a white to off-white powder, with a pKa of 5.9. It is freely soluble in dimethylformamide, soluble in 0.1N sodium hydroxide and slightly soluble in methylene chloride. Glipizide extended-release tablets are formulated as a once-a-day extended-release tablet for oral use and are designed to deliver 2.5 mg, 5 mg, or 10 mg of glipizide. Each glipizide extended-release tablet contains the following inactive ingredients: acetyltributyl citrate, colloidal silicon dioxide, hydroxyethyl cellulose, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer and polyethylene glycol. Additionally each 2.5 mg tablet contains: FD&C yellow #5 aluminum lake and titanium dioxide. Each 5 mg tablet contains: FD&C yellow #6 aluminum lake and titanium dioxide. The tablet is imprinted with opacode black S-1-17823 which contains following ingredients: ammonium hydroxide, iron oxide black, isopropyl alcohol, n-butyl alcohol, propylene glycol and shellac. System Components and Performance. Glipizide extended-release tablets are formulated as once-a-day extended-release tablets and are designed to deliver glipizide at a controlled rate over approximately 20 hours. The dosage form is comprised of a hydrophilic cellulose polymer matrix tablet containing the drug which is surrounded by a seal coat followed by an enteric coating system. The enteric coat is insoluble in the low pH environment of the stomach. As the tablet passes through the stomach and enters in the higher pH environment of the small intestine, the enteric coating dissolves and/or erodes to expose the polymer matrix tablet which swells and releases the drug at a controlled rate via diffusion and/or erosion.</Description>
</NDC>
<NDC>
<NDCCode>70934-336-90</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE, PLASTIC (70934-336-90) </PackageDescription>
<NDC11Code>70934-0336-90</NDC11Code>
<ProductNDC>70934-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190418</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076515</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. dba Northwind Pharmaceuticals</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190418</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults ( 1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults ( 1.2) , 3 Treatment of active benign gastric ulcer in adults ( 1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 2 years of age and older ( 1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) , 7 Pathologic hypersecretory conditions in adults ( 1.7) .</IndicationAndUsage>
<Description>The active ingredient in omeprazole delayed-release capsule, USP is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1 H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C 17H 19N 3O 3S, with a molecular weight of 345.42. The structural formula is:. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. The Dissolution test to be performed according to USP Test 2. Omeprazole is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole in the form of enteric-coated granules. The 10 mg and 20 mg capsule contains the following inactive ingredients: anhydrous lactose, low-substituted hydroxypropyl cellulose, magnesium oxide, magnesium stearate, microcrystalline cellulose, methacrylic acid copolymer dispersion type C, polysorbate 80, povidone and talc, triethyl citrate. The capsule shells for the 10 mg have the following inactive ingredients: black iron oxide, gelatin, red iron oxide, titanium dioxide and yellow iron oxide. The capsule shells for the 20 mg have the following inactive ingredients: gelatin and titanium dioxide. The ink used for printing contains: black iron oxide, propylene glycol and shellac. The 40 mg capsule contains the following inactive ingredients: acetone, anhydrous lactose, croscarmellose sodium, dehydrated alcohol, dibutyl sebacate, hypromellose phthalate, low-substituted hydroxypropyl cellulose, microcrystalline cellulose, polysorbate 80, povidone and talc. The capsule shells for the 40 mg have the following inactive ingredients: hypromellose, red iron oxide, titanium dioxide, and yellow iron oxide. In addition, the capsule shells may also contain black iron oxide, carrageenan, and potassium chloride. The ink used for printing contains black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>71205-336-90</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (71205-336-90) </PackageDescription>
<NDC11Code>71205-0336-90</NDC11Code>
<ProductNDC>71205-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204106</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol succinate, is a beta1-selective adrenoceptor blocking agent. Metoprolol succinate extended-release tablets, USP are indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Angina Pectoris. (1.2), 3 Heart Failure - for the treatment of stable, symptomatic (NYHA Class II or III) heart failure of ischemic, hypertensive, or cardiomyopathic origin. (1.3).</IndicationAndUsage>
<Description>Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets, USP have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75, 47.5, 95 and 190 mg of metoprolol succinate equivalent to 25, 50, 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1- (isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: sugar spheres, povidone, ethyl cellulose, polyethylene glycol, hydroxypropyl cellulose, triethyl citrate, magnesium stearate, microcrystalline cellulose, titanium dioxide, polydextrose, hypromellose, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>71610-336-60</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71610-336-60) </PackageDescription>
<NDC11Code>71610-0336-60</NDC11Code>
<ProductNDC>71610-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carbamazepine</ProprietaryName>
<NonProprietaryName>Carbamazepine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19961003</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074649</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>CARBAMAZEPINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carbamazepine is indicated for use as an anticonvulsant drug. Evidence supporting efficacy of carbamazepine as an anticonvulsant was derived from active drug-controlled studies that enrolled patients with the following seizure types: 1 Partial seizures with complex symptomatology (psychomotor, temporal lobe). Patients with these seizures appear to show greater improvement than those with other types., 2 Generalized tonic-clonic seizures (grand mal)., 3 Mixed seizure patterns which include the above, or other partial or generalized seizures. Absence seizures (petit mal) do not appear to be controlled by carbamazepine (see PRECAUTIONS, General). .</IndicationAndUsage>
<Description>Carbamazepine USP, is an anticonvulsant and specific analgesic for trigeminal neuralgia, available for oral administration as tablets of 200 mg. Its chemical name is 5 H-dibenz[ b,f]azepine-5-carboxamide, and its structural formula is:. C 15H 12N 2O. Carbamazepine USP is a white to off-white powder, practically insoluble in water and soluble in alcohol and in acetone. Its molecular weight is 236.27. Inactive Ingredients: Carbamazepine Tablets USP, 200 mg – ammonio methacrylate copolymer, corn starch, croscarmellose sodium, diethyl phthalate, magnesium stearate and microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>52959-002-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (52959-002-90) </PackageDescription>
<NDC11Code>52959-0002-90</NDC11Code>
<ProductNDC>52959-002</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20011008</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20011008</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>52959-003-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (52959-003-90) </PackageDescription>
<NDC11Code>52959-0003-90</NDC11Code>
<ProductNDC>52959-003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089805</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>CODEINE PHOSPHATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>30; 300</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19880930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the relief of mild to moderately severe pain.</IndicationAndUsage>
<Description>Acetaminophen and codeine is supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. Each 300 mg/30 mg Acetaminophen and Codeine Phosphate Tablet contains: Acetaminophen ......................................................................................................300 mg Codeine Phosphate ..................................................................................................30 mg.</Description>
</NDC>
<NDC>
<NDCCode>52959-008-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (52959-008-90)</PackageDescription>
<NDC11Code>52959-0008-90</NDC11Code>
<ProductNDC>52959-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19771121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085969</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline HCl, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>52959-009-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (52959-009-90)</PackageDescription>
<NDC11Code>52959-0009-90</NDC11Code>
<ProductNDC>52959-009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonazepam</ProprietaryName>
<NonProprietaryName>Clonazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074869</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>CLONAZEPAM</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Seizure Disorders: Clonazepam tablets, USP are useful alone or as an adjunct in the treatment of the Lennox-Gastaut syndrome (petit mal variant), akinetic and myoclonic seizures. In patients with absence seizures (petit mal) who have failed to respond to succinimides, clonazepam may be useful. In some studies, up to 30% of patients have shown a loss of anticonvulsant activity, often within 3 months of administration. In some cases, dosage adjustment may reestablish efficacy. Panic Disorder: Clonazepam tablets, USP are indicated for the treatment of panic disorder, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of clonazepam was established in two 6- to 9-week trials in panic disorder patients whose diagnoses corresponded to the DSM-IIIR category of panic disorder (see CLlNICAL PHARMACOLOGY: Clinical Trials). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The effectiveness of clonazepam in long-term use, that is, for more than 9 weeks, has not been systematically studied in controlled clinical trials. The physician who elects to use clonazepam for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Clonazepam, USP a benzodiazepine, is available for oral administration as scored tablets containing 0.5 mg, 1 mg or 2 mg of clonazepam. In addition, each tablet also contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The 0.5 mg tablet also contains D&C Red #30 aluminum lake. The 1 mg tablet also contains D&C Yellow #10HT aluminum lake. Chemically, clonazepam is 5-(o-Chlorophenyl)-1,3-dihydro-7-nitro-2H-1,4-benzodiazepin-2-one. It is a light yellow crystalline powder. It has a molecular weight of 315.72 and the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>52959-026-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (52959-026-90)</PackageDescription>
<NDC11Code>52959-0026-90</NDC11Code>
<ProductNDC>52959-026</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carisoprodol</ProprietaryName>
<NonProprietaryName>Carisoprodol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19960124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040124</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>CARISOPRODOL</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Carisoprodol Tablets, USP are indicated for the relief of discomfort associated with acute, painful musculoskeletal conditions in adults. Carisoprodol Tablets should only be used for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use has not been established and because acute, painful musculoskeletal conditions are generally of short duration. [see DOSAGE AND ADMINISTRATION (2)].</IndicationAndUsage>
<Description>Carisoprodol Tablets are available as 350 mg round, white tablets. Carisoprodol is a white, crystalline powder, having a mild, characteristic odor and a bitter taste. It is slightly soluble in water; freely soluble in alcohol, in chloroform, and in acetone; and its solubility is practically independent of pH. Carisoprodol is present as a racemic mixture. Chemically, carisoprodol is N-isopropyl-2-methyl-2-propyl-1,3-propanediol dicarbamate and the molecular formula is C12H24N2O4, with a molecular weight of 260.33. The structural formula is. Other Ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, methylcellulose, povidone, sodium lauryl sulfate, sodium starch glycolate, and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>52959-033-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (52959-033-90)</PackageDescription>
<NDC11Code>52959-0033-90</NDC11Code>
<ProductNDC>52959-033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hydrochloride</ProprietaryName>
<NonProprietaryName>Meclizine Hydrocloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100604</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040659</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC],Emesis Suppression [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the management of nausea and vomiting, and dizziness associated with motion sickness.</IndicationAndUsage>
<Description>Chemically, Meclizine HCl is 1-(p-chloro-α-phenylbenzyl)-4-(m-methylbenzyl) piperazine dihydrochloride monohydrate. C25H27ClN2. 2HCl. H2O M.W. 481.88Meclizine HCI Tablets, USP are available in two different strengths: 12.5 mg and 25 mg. In addition each tablet contains the following inactive ingredients: Colloidal Silicon Dioxide, Croscarmellose Sodium, Lactose Monohydrate, Magnesium Stearate, Microcrystalline Cellulose. Also, Meclizine HCI Tablets USP, 12.5 mg contains FD&C Blue #1 Aluminum Lake (11-13%) and Meclizine HCI Tablets USP, 25 mg contains D&C Yellow #10 Aluminum Lake (15-20%).</Description>
</NDC>
<NDC>
<NDCCode>52959-042-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 CONTAINER (52959-042-90)</PackageDescription>
<NDC11Code>52959-0042-90</NDC11Code>
<ProductNDC>52959-042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077797</ApplicationNumber>
<LabelerName>H. J Harkins Company Inc</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE],Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-28</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cyclobenzaprine HCl tablets USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine HCl should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine HCl has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white, crystalline tricyclic amine salt with the empirical formula C20H21NHCl and a molecular weight of 311.9. It has a melting point of 217˚C, and a pKa of 8.47 at 25˚C. It is freely soluble in water and alcohol, sparingly soluble in isopropanol, and insoluble in hydrocarbon solvents. If aqueous solutions are made alkaline, the free base separates. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H –dibenzo[a,d]cyclohepten-5-ylidene)-N, N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. [Image]. Cyclobenzaprine HCl USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine HCl USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine HCl tablets USP, 5 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry beige (hypromellose 6cP, titanium dioxide, PEG 400, iron oxide yellow and iron oxide red). Cyclobenzaprine HCl tablets USP, 10 mg contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, magnesium stearate and opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow and polysorbate 80).</Description>
</NDC>
<NDC>
<NDCCode>52959-047-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (52959-047-90) </PackageDescription>
<NDC11Code>52959-0047-90</NDC11Code>
<ProductNDC>52959-047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071135</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam Tablets USP are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; and stiff-man syndrome. Oral diazepam may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-chloro-1,3-dihydro-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The empirical formula is C16H13ClN2O and the molecular weight is 284.75. The structural formula is as follows. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: anhydrous lactose, magnesium stearate and microcrystalline cellulose. Diazepam Tablets USP 5 mg also contain D&C Yellow No. 10. Diazepam Tablets USP 10 mg also contain FD&C Blue No. 1.</Description>
</NDC>
<NDC>
<NDCCode>52959-055-90</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE, PLASTIC (52959-055-90)</PackageDescription>
<NDC11Code>52959-0055-90</NDC11Code>
<ProductNDC>52959-055</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19841107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062396</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate capsules and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline hyclate is a broad-spectrum antibiotic synthetically derived from oxytetracycline. The structural formula is as follows. with a molecular formula of C22H24N2O8H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. Doxycycline is a light yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. 100 mg gelatin capsule shell contains: FD&C Blue #1, silicon dioxide, sodium lauryl sulfate and titanium dioxide. The printing ink contains: D&C Yellow #10, FD&C Blue #1, FD&C Blue #2, FD&C Red #40, n-Butyl Alcohol, Pharmaceutical Glaze, Propylene Glycol, SDA-3A Alcohol and Synthetic Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>52959-074-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (52959-074-90)</PackageDescription>
<NDC11Code>52959-0074-90</NDC11Code>
<ProductNDC>52959-074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040804</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>HYDROXYZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses, and in histamine-mediated pruritus. As a sedative when used as a premedication and following general anesthesia, hydrOXYzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. HydrOXYzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydrOXYzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>HydrOXYzine hydrochloride has the chemical name of 2-[2-[4-(p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. HydrOXYzine hydrochloride occurs as a white, odorless powder which is very soluble in water. Each tablet for oral administration contains 10 mg, 25 mg or 50 mg hydrOXYzine HCI. Inactive ingredients include: lactose monohydrate, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, stearic acid, polyethylene glycol, polysorbate 80, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>52959-076-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (52959-076-90)</PackageDescription>
<NDC11Code>52959-0076-90</NDC11Code>
<ProductNDC>52959-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091123</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078558</ApplicationNumber>
<LabelerName>H.J. Harkins Company, Inc.</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Carefully consider the potential benefits and risks of Ibuprofen Tablets, USP and other treatment options before deciding to use Ibuprofen Tablets, USP. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ibuprofen Tablets, USP are indicated for relief of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ibuprofen Tablets, USP are indicated for relief of mild to moderate pain. Ibuprofen Tablets, USP are also indicated for the treatment of primary dysmenorrhea. Controlled clinical trials to establish the safety and effectiveness of Ibuprofen Tablets, USP in children have not been conducted.</IndicationAndUsage>
<Description>Ibuprofen Tablets, USP contain the active ingredient ibuprofen, which is (±) – 2 – (p – isobutylphenyl) propionic acid. Ibuprofen is a white powder with a melting point of 74-77° C and is very slightly soluble in water (<1 mg/mL) and readily soluble in organic solvents such as ethanol and acetone. The structural formula is represented below. Ibuprofen Tablets, USP, a nonsteroidal anti-inflammatory drug (NSAID), is available in 400 mg, 600 mg, and 800 mg tablets for oral administration. Inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, pregelatinized starch, talc, stearic acid, and titanium dioxide.</Description>
</NDC>
</NDCList>