{
"NDC": [
{
"NDCCode": "53002-1108-0",
"PackageDescription": "100 TABLET in 1 BOTTLE (53002-1108-0) ",
"NDC11Code": "53002-1108-00",
"ProductNDC": "53002-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20041116",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074056",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents.",
"Description": "Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. C14H22N2O3 M.W. (free base) 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Each tablet, for oral administration, contains 25 mg, 50 mg or 100 mg of atenolol, USP. In addition, each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
},
{
"NDCCode": "53002-1108-1",
"PackageDescription": "10 TABLET in 1 BOTTLE (53002-1108-1) ",
"NDC11Code": "53002-1108-01",
"ProductNDC": "53002-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20041116",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074056",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents.",
"Description": "Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. C14H22N2O3 M.W. (free base) 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Each tablet, for oral administration, contains 25 mg, 50 mg or 100 mg of atenolol, USP. In addition, each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
},
{
"NDCCode": "53002-1108-3",
"PackageDescription": "30 TABLET in 1 BOTTLE (53002-1108-3) ",
"NDC11Code": "53002-1108-03",
"ProductNDC": "53002-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20041116",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074056",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents.",
"Description": "Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. C14H22N2O3 M.W. (free base) 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Each tablet, for oral administration, contains 25 mg, 50 mg or 100 mg of atenolol, USP. In addition, each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
},
{
"NDCCode": "53002-1108-6",
"PackageDescription": "60 TABLET in 1 BOTTLE (53002-1108-6) ",
"NDC11Code": "53002-1108-06",
"ProductNDC": "53002-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20041116",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074056",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents.",
"Description": "Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. C14H22N2O3 M.W. (free base) 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Each tablet, for oral administration, contains 25 mg, 50 mg or 100 mg of atenolol, USP. In addition, each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
},
{
"NDCCode": "46438-1108-0",
"PackageDescription": "25 kg in 1 DRUM (46438-1108-0) ",
"NDC11Code": "46438-1108-00",
"ProductNDC": "46438-1108",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20120301",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Dipharma Francis Srl",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20-SEP-18"
},
{
"NDCCode": "50090-1108-0",
"PackageDescription": "30 TABLET in 1 BOTTLE (50090-1108-0) ",
"NDC11Code": "50090-1108-00",
"ProductNDC": "50090-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril And Hydrochlorothiazide",
"NonProprietaryName": "Lisinopril And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20030304",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076194",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "HYDROCHLOROTHIAZIDE; LISINOPRIL",
"StrengthNumber": "12.5; 20",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20141128",
"SamplePackage": "N"
},
{
"NDCCode": "55714-1108-0",
"PackageDescription": "15 mL in 1 BOTTLE, GLASS (55714-1108-0)",
"NDC11Code": "55714-1108-00",
"ProductNDC": "55714-1108",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sports Recovery",
"NonProprietaryName": "Apis Mel., Arnica, Bellis, Bryonia, Calendula, Chamomilla, Cinchona, Gelsemium, Hamamelis, Hypericum, Lacticum Acidum, Ledum, Phosphorus, Rhus Toxicodendron, Ruta, Sarcolacticum Ac., Staphysag., Symphytum, Echinacea, Hydrastis",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20160725",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Newton Laboratories, Inc.",
"SubstanceName": "APIS MELLIFERA; ARNICA MONTANA; BELLIS PERENNIS; BRYONIA ALBA ROOT; CALENDULA OFFICINALIS FLOWERING TOP; MATRICARIA RECUTITA; CINCHONA OFFICINALIS BARK; GELSEMIUM SEMPERVIRENS ROOT; HAMAMELIS VIRGINIANA ROOT BARK/STEM BARK; HYPERICUM PERFORATUM; LACTIC ACID, DL-; LEDUM PALUSTRE TWIG; PHOSPHORUS; TOXICODENDRON PUBESCENS LEAF; RUTA GRAVEOLENS FLOWERING TOP; LACTIC ACID, L-; DELPHINIUM STAPHISAGRIA SEED; COMFREY ROOT; ECHINACEA, UNSPECIFIED; GOLDENSEAL",
"StrengthNumber": "15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 3; 3",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Sports Recovery Formulated for workout recovery and for symptoms associated with injury, overexertion and emotional distress."
},
{
"NDCCode": "70518-1108-0",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (70518-1108-0) ",
"NDC11Code": "70518-1108-00",
"ProductNDC": "70518-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078154",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180411",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam tablets USP are indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam tablets USP are indicated for adjunctive therapy for treatment of: 1 Partial onset seizures in patients one month of age and older with epilepsy ( 1.1) , 2 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy ( 1.2) , 3 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy ( 1.3) .",
"Description": "Levetiracetam USP is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1000 mg (white) tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent). Levetiracetam tablets USP contain the labeled amount of levetiracetam. For 250 mg, 500 mg and 750 mg strengths. Inactive ingredients: colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake. 500 mg tablets: Yellow Iron Oxide. 750 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake, FD&C Yellow No. 6/sunset yellow FCF Aluminum Lake, iron oxide red. For 1000 mg strength. Inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide."
},
{
"NDCCode": "0046-1108-11",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (0046-1108-11) / 28 TABLET, SUGAR COATED in 1 BLISTER PACK",
"NDC11Code": "00046-1108-11",
"ProductNDC": "0046-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prempro",
"NonProprietaryName": "Conjugated Estrogens And Medroxyprogesterone Acetate",
"DosageFormName": "TABLET, SUGAR COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20121203",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020527",
"LabelerName": "Wyeth Pharmaceuticals LLC, a subsidiary of Pfizer Inc.",
"SubstanceName": "ESTROGENS, CONJUGATED; MEDROXYPROGESTERONE ACETATE",
"StrengthNumber": ".625; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Estrogen Receptor Agonists [MoA], Estrogen [EPC], Estrogens, Conjugated (USP) [CS], Progesterone Congeners [CS], Progestin [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121203",
"SamplePackage": "N",
"Description": "Premarin (conjugated estrogens tablets, USP) for oral administration contains a mixture obtained exclusively from natural sources, occurring as the sodium salts of water-soluble estrogen sulfates blended to represent the average composition of material derived from pregnant mares' urine. It is a mixture of sodium estrone sulfate and sodium equilin sulfate. It contains as concomitant components, as sodium sulfate conjugates, 17 α-dihydroequilin, 17 α-estradiol and 17 β-dihydroequilin. Medroxyprogesterone acetate is a derivative of progesterone. It is a white to off-white, odorless, crystalline powder, stable in air, melting between 200°C and 210°C. It is freely soluble in chloroform, soluble in acetone and in dioxane, sparingly soluble in alcohol and in methanol, slightly soluble in ether, and insoluble in water. The chemical name for MPA is pregn-4-ene-3, 20-dione, 17-(acetyloxy)-6-methyl-, (6α)-. Its molecular formula is C24H34O4, with a molecular weight of 386.53. Its structural formula is. PREMPRO 0.3 mg/1.5 mg and 0.45 mg/1.5 mg tablets contain the following inactive ingredients: calcium phosphate tribasic, microcrystalline cellulose, carnauba wax, hypromellose, hydroxypropyl cellulose, sucrose, Eudragit NE 30D, lactose monohydrate, magnesium stearate, polyethylene glycol, titanium dioxide, yellow iron oxide, propylene glycol and black iron oxide. PREMPRO 0.625 mg/2.5 mg tablets contain the following inactive ingredients: calcium phosphate tribasic, microcrystalline cellulose, carnauba wax, hypromellose, hydroxypropyl cellulose, sucrose, Eudragit NE 30D, lactose monohydrate, magnesium stearate, polyethylene glycol, propylene glycol, titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide. PREMPRO 0.625 mg/5 mg tablets contain the following inactive ingredients: calcium phosphate tribasic, carnauba wax, Eudragit NE 30D, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sucrose, titanium dioxide, triethyl citrate, FD&C Blue No. 2, black iron oxide, and propylene glycol."
},
{
"NDCCode": "22840-1108-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-1108-2) ",
"NDC11Code": "22840-1108-02",
"ProductNDC": "22840-1108",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Dog Epithelia",
"NonProprietaryName": "Canis Lupus Familiaris",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "CANIS LUPUS FAMILIARIS SKIN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "22840-1108-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (22840-1108-4) ",
"NDC11Code": "22840-1108-04",
"ProductNDC": "22840-1108",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Dog Epithelia",
"NonProprietaryName": "Canis Lupus Familiaris",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "CANIS LUPUS FAMILIARIS SKIN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "36987-1108-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-1108-1)",
"NDC11Code": "36987-1108-01",
"ProductNDC": "36987-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rat Epithelium",
"NonProprietaryName": "Rat Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "RATTUS NORVEGICUS SKIN",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1108-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1108-2)",
"NDC11Code": "36987-1108-02",
"ProductNDC": "36987-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rat Epithelium",
"NonProprietaryName": "Rat Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "RATTUS NORVEGICUS SKIN",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1108-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-1108-3)",
"NDC11Code": "36987-1108-03",
"ProductNDC": "36987-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rat Epithelium",
"NonProprietaryName": "Rat Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "RATTUS NORVEGICUS SKIN",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-1108-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-1108-4)",
"NDC11Code": "36987-1108-04",
"ProductNDC": "36987-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rat Epithelium",
"NonProprietaryName": "Rat Epithelium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "RATTUS NORVEGICUS SKIN",
"StrengthNumber": "20000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "59762-1108-1",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (59762-1108-1) ",
"NDC11Code": "59762-1108-01",
"ProductNDC": "59762-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eplerenone",
"NonProprietaryName": "Eplerenone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20241114",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021437",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "EPLERENONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241114",
"SamplePackage": "N",
"IndicationAndUsage": "Eplerenone is an aldosterone antagonist indicated for: 1 Improving survival of stable adult patients with symptomatic heart failure with reduced ejection fraction (HFrEF) after an acute myocardial infarction. (1.1), 2 The treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.2).",
"Description": "Eplerenone tablets contain eplerenone, a blocker of aldosterone binding at the mineralocorticoid receptor. Eplerenone is chemically described as Pregn-4-ene-7,21-dicarboxylic acid, 9,11-epoxy-17-hydroxy-3-oxo-, γ-lactone, methyl ester, (7α,11α,17α)-. Its empirical formula is C24H30O6 and it has a molecular weight of 414.50. The structural formula of eplerenone is represented below. Eplerenone is an odorless, white to off-white crystalline powder. It is very slightly soluble in water, with its solubility essentially pH-independent. The octanol/water partition coefficient of eplerenone is approximately 7.1 at pH 7.0. Eplerenone tablets for oral administration contain 25 mg or 50 mg of eplerenone and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, red iron oxide, sodium lauryl sulfate, talc, titanium dioxide, and yellow iron oxide."
},
{
"NDCCode": "59762-1108-2",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (59762-1108-2) ",
"NDC11Code": "59762-1108-02",
"ProductNDC": "59762-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eplerenone",
"NonProprietaryName": "Eplerenone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20241114",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021437",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "EPLERENONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251105",
"SamplePackage": "N",
"IndicationAndUsage": "Eplerenone is an aldosterone antagonist indicated for: 1 Improving survival of stable adult patients with symptomatic heart failure with reduced ejection fraction (HFrEF) after an acute myocardial infarction. (1.1), 2 The treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.2).",
"Description": "Eplerenone tablets contain eplerenone, a blocker of aldosterone binding at the mineralocorticoid receptor. Eplerenone is chemically described as Pregn-4-ene-7,21-dicarboxylic acid, 9,11-epoxy-17-hydroxy-3-oxo-, γ-lactone, methyl ester, (7α,11α,17α)-. Its empirical formula is C24H30O6 and it has a molecular weight of 414.50. The structural formula of eplerenone is represented below. Eplerenone is an odorless, white to off-white crystalline powder. It is very slightly soluble in water, with its solubility essentially pH-independent. The octanol/water partition coefficient of eplerenone is approximately 7.1 at pH 7.0. Eplerenone tablets for oral administration contain 25 mg or 50 mg of eplerenone and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, red iron oxide, sodium lauryl sulfate, talc, titanium dioxide, and yellow iron oxide."
},
{
"NDCCode": "63629-1108-1",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (63629-1108-1) ",
"NDC11Code": "63629-1108-01",
"ProductNDC": "63629-1108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phentermine Hydrochloride",
"NonProprietaryName": "Phentermine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200617",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040526",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "PHENTERMINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-08-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200617",
"SamplePackage": "N",
"IndicationAndUsage": "Phentermine hydrochloride is indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥ 30 kg/m2, or ≥ 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of body mass index (BMI) based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches × 0.0254 = meters. The limited usefulness of agents of this class, including phentermine hydrochloride tablets, [see Clinical Pharmacology (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.",
"Description": "Phentermine hydrochloride USP has the chemical name of α,α,-Dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride, an anorectic agent for oral administration, is available as a tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride tablets contain the inactive ingredients: crospovidone, dibasic calcium phosphate dihydrate, FD&C Blue #1, magnesium stearate, and povidone."
},
{
"NDCCode": "53002-0060-0",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (53002-0060-0) ",
"NDC11Code": "53002-0060-00",
"ProductNDC": "53002-0060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201506",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20171001",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients (1.1): 1 Cold Sores (Herpes Labialis), 2 Genital HerpesTreatment in immunocompetent patients (initial or recurrent episode)Suppression in immunocompetent or HIV-infected patientsReduction of transmission, 3 Herpes Zoster.",
"Description": "Valacyclovir hydrochloride, USP is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride, USP equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients crospovidone, FD&C Blue No. 2, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide. The chemical name of valacyclovir hydrochloride, USP is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pKas for valacyclovir hydrochloride, USP are 1.90, 7.47, and 9.43. Valacyclovir hydrochloride, USP comply with USP dissolution test 2."
},
{
"NDCCode": "53002-0061-0",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (53002-0061-0) ",
"NDC11Code": "53002-0061-00",
"ProductNDC": "53002-0061",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090682",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) : 1 Cold Sores (Herpes Labialis) , 2 Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-1-infected patients Reduction of transmission , 3 Herpes Zoster .",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir.Valacyclovir tablets, USP are for oral administration. Each tablet contains 556 mg or 1.112 grams of valacyclovir hydrochloride USP (hydrous) equivalent to 500 mg or 1 gram of valacyclovir, respectively, and the inactive ingredients crospovidone, FD&C blue #2/indigo carmine aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide.The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride USP (hydrous) is a white or almost white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pkas for valacyclovir hydrochloride are 1.90, 7.47, and 9.43."
},
{
"NDCCode": "53002-0062-0",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (53002-0062-0) ",
"NDC11Code": "53002-0062-00",
"ProductNDC": "53002-0062",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir",
"NonProprietaryName": "Valacyclovir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203047",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240101",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir tablet, USP is a nucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) Cold Sores (Herpes Labialis) Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-infected patients Reduction of transmission Herpes Zoster Pediatric Patients (1.2) Cold Sores (Herpes Labialis) Chickenpox Limitations of Use (1.3) The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride USP equivalent to 500 mg or 1gm valacyclovir and the inactive ingredients crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. In addition to this 500 mg contains FD&C blue #2/ indigo carmine aluminum lake. The chemical name of valacyclovir hydrochloride is L-valine2-[(2-amino-1,6-dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester hydrochloride monohydrate. It has the following structural formula:. Valacyclovir hydrochloride USP (monohydrate)is a white or almost white powder with the molecular formula C 13H 23N 6O 5Cl and a molecular weight of 378.81. Valacyclovir hydrochloride USP is freely soluble in water and practically insoluble in 1-octanol. The pka for valacyclovir hydrochloride is 5.95. Valacyclovir Tablets USP, 500 gm and 1 g complies with USP dissolution test 2."
},
{
"NDCCode": "53002-0270-0",
"PackageDescription": "50 TABLET in 1 BOTTLE (53002-0270-0) ",
"NDC11Code": "53002-0270-00",
"ProductNDC": "53002-0270",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203834",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20171001",
"SamplePackage": "N",
"IndicationAndUsage": "Herpes Zoster Infections: Acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).",
"Description": "Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir tablets, USP is a formulation for oral administration. Each Acyclovir Tablet contains 400 mg or 800 mg of acyclovir. In addition, each tablet contains the inactive ingredients colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 400 mg and 800 mg tablet also contains ferric oxide and FD&C blue lake # 2 Indigo carmine AL, respectively. Acyclovir USP is a white to off white crystalline powder, slightly hygroscopic with the molecular formula C 8H 11N 5O 3 and a molecular weight of 225.20. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 6H-Purin-6-one, 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-. It has the following structural formula:."
},
{
"NDCCode": "53002-0271-0",
"PackageDescription": "50 TABLET in 1 BOTTLE (53002-0271-0) ",
"NDC11Code": "53002-0271-00",
"ProductNDC": "53002-0271",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091022",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075382",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200101",
"SamplePackage": "N",
"IndicationAndUsage": "Acyclovir is indicated for the acute treatment of herpes zoster (shingles).",
"Description": "Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir tablets are formulations of an antiviral drug for oral administration. Each 800-mg tablet of acyclovir contains 800 mg of acyclovir and the inactive ingredients corn starch, microcrystalline cellulose, magnesium stearate, and sodium starch glycolate. Each 400-mg tablet of acyclovir contains 400 mg of acyclovir and the inactive ingredients corn starch, microcrystalline cellulose, magnesium stearate, and sodium starch glycolate. Acyclovir is a white, crystalline powder with the molecular formula C 8H 11N 5O 3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 6H-purin-6-one, 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]; it has the following structural formula:."
},
{
"NDCCode": "53002-0272-0",
"PackageDescription": "50 TABLET in 1 BOTTLE (53002-0272-0) ",
"NDC11Code": "53002-0272-00",
"ProductNDC": "53002-0272",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209366",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "800",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Acyclovir is indicated for the acute treatment of herpes zoster (shingles).",
"Description": "Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir Tablets are formulations for oral administration. Each 800-mg tablet of acyclovir contains 800mg of acyclovir and the inactive ingredients FD&C Blue No. 2, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. Each 400-mg tablet of acyclovir contains 400mg of acyclovir and the inactive ingredients magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. Acyclovir is a white, crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino -1, 9 -dihydro -9 - [(2-hydroxyethoxy) methyl]-6 H-purin-6 -one; it has the following structural formula."
},
{
"NDCCode": "53002-0670-0",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (53002-0670-0) ",
"NDC11Code": "53002-0670-00",
"ProductNDC": "53002-0670",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20160429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204446",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-12-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20171001",
"SamplePackage": "N"
},
{
"NDCCode": "53002-0671-0",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (53002-0671-0) ",
"NDC11Code": "53002-0671-00",
"ProductNDC": "53002-0671",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Monohydrate",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050207",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA050641",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of Doxycycline Monohydrate Capsules and other antibacterial drugs, Doxycycline Monohydrate Capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms: Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Calymmatobacterium granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug: Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug: Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections: Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline Monohydrate Capsules 100 mg, 75 mg, and 50 mg capsules contain doxycycline monohydrate equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8 H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, red iron oxide, and yellow iron oxide for the 50 mg and 100 mg strengths and black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10 for the 75 mg strength."
},
{
"NDCCode": "53002-0672-0",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (53002-0672-0) ",
"NDC11Code": "53002-0672-00",
"ProductNDC": "53002-0672",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20150528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204446",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N"
},
{
"NDCCode": "53002-0673-0",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (53002-0673-0) ",
"NDC11Code": "53002-0673-00",
"ProductNDC": "53002-0673",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20001226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065053",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210101",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules, USP and other antibacterial drugs, doxycycline capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline capsules, USP are indicated for the treatment of the following infections:. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline capsules, USP are also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline capsules, USP are indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline capsules, USP are indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug:. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline capsules, USP are an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline capsules, USP may be a useful adjunct to amebicides. In severe acne, doxycycline capsules, USP may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules, USP 100 mg, 75 mg, and 50 mg contain doxycycline monohydrate, USP equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the yellow crystalline powder is 4-(Dimethylamino)-1,4,4a,5,5a,6, 11,12a-octahydro-3,5,10,-12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacene-carboxamide monohydrate. Structural formula: 1 C22H24N2O8 H2O M.W. = 462.46."
},
{
"NDCCode": "53002-0674-0",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (53002-0674-0) ",
"NDC11Code": "53002-0674-00",
"ProductNDC": "53002-0674",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20150528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204446",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210101",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules, USP and other antibacterial drugs, doxycycline capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms: Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug: Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug: Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections: Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules USP, 50 mg, 75 mg, and 100 mg contain doxycycline monohydrate equivalent to 50 mg, 75 mg, and 100 mg of doxycycline for oral administration. The chemical designation of the light yellow to pale yellow powder is 2-Naphthacenecarboxamide, 4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-,[4S-(4α,4aα,5a,5aα,6a,12aα)]-, monohydrate. Structural formula. C22H24N2O8 H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains FD & C Red # 3, D&C Yellow # 10, titanium dioxide, gelatin, sodium lauryl sulfate for the 50 mg strength; iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide, gelatin, sodium lauryl sulfate for the 75 mg strength and iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide, FD & C Red # 3, D&C Yellow # 10, gelatin, sodium lauryl sulfate for the 100 mg strength. The capsules are printed with edible ink containing shellac, titanium dioxide, black iron oxide, brown iron oxide and potassium hydroxide for 50 mg, 75 mg and 100 mg strengths."
},
{
"NDCCode": "53002-0675-0",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (53002-0675-0) ",
"NDC11Code": "53002-0675-00",
"ProductNDC": "53002-0675",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20220801",
"EndMarketingDate": "20241231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065055",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240101",
"EndMarketingDatePackage": "20241231",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>53002-1108-0</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (53002-1108-0) </PackageDescription>
<NDC11Code>53002-1108-00</NDC11Code>
<ProductNDC>53002-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20041116</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074056</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. C14H22N2O3 M.W. (free base) 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Each tablet, for oral administration, contains 25 mg, 50 mg or 100 mg of atenolol, USP. In addition, each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>53002-1108-1</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (53002-1108-1) </PackageDescription>
<NDC11Code>53002-1108-01</NDC11Code>
<ProductNDC>53002-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20041116</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074056</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. C14H22N2O3 M.W. (free base) 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Each tablet, for oral administration, contains 25 mg, 50 mg or 100 mg of atenolol, USP. In addition, each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>53002-1108-3</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (53002-1108-3) </PackageDescription>
<NDC11Code>53002-1108-03</NDC11Code>
<ProductNDC>53002-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20041116</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074056</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. C14H22N2O3 M.W. (free base) 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Each tablet, for oral administration, contains 25 mg, 50 mg or 100 mg of atenolol, USP. In addition, each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>53002-1108-6</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (53002-1108-6) </PackageDescription>
<NDC11Code>53002-1108-06</NDC11Code>
<ProductNDC>53002-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20041116</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074056</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atenolol tablets USP are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol, USP. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets USP may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, USP, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. C14H22N2O3 M.W. (free base) 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Each tablet, for oral administration, contains 25 mg, 50 mg or 100 mg of atenolol, USP. In addition, each tablet contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>46438-1108-0</NDCCode>
<PackageDescription>25 kg in 1 DRUM (46438-1108-0) </PackageDescription>
<NDC11Code>46438-1108-00</NDC11Code>
<ProductNDC>46438-1108</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20120301</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Dipharma Francis Srl</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20-SEP-18</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>50090-1108-0</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50090-1108-0) </PackageDescription>
<NDC11Code>50090-1108-00</NDC11Code>
<ProductNDC>50090-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Lisinopril And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030304</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076194</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; LISINOPRIL</SubstanceName>
<StrengthNumber>12.5; 20</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55714-1108-0</NDCCode>
<PackageDescription>15 mL in 1 BOTTLE, GLASS (55714-1108-0)</PackageDescription>
<NDC11Code>55714-1108-00</NDC11Code>
<ProductNDC>55714-1108</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sports Recovery</ProprietaryName>
<NonProprietaryName>Apis Mel., Arnica, Bellis, Bryonia, Calendula, Chamomilla, Cinchona, Gelsemium, Hamamelis, Hypericum, Lacticum Acidum, Ledum, Phosphorus, Rhus Toxicodendron, Ruta, Sarcolacticum Ac., Staphysag., Symphytum, Echinacea, Hydrastis</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160725</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Newton Laboratories, Inc.</LabelerName>
<SubstanceName>APIS MELLIFERA; ARNICA MONTANA; BELLIS PERENNIS; BRYONIA ALBA ROOT; CALENDULA OFFICINALIS FLOWERING TOP; MATRICARIA RECUTITA; CINCHONA OFFICINALIS BARK; GELSEMIUM SEMPERVIRENS ROOT; HAMAMELIS VIRGINIANA ROOT BARK/STEM BARK; HYPERICUM PERFORATUM; LACTIC ACID, DL-; LEDUM PALUSTRE TWIG; PHOSPHORUS; TOXICODENDRON PUBESCENS LEAF; RUTA GRAVEOLENS FLOWERING TOP; LACTIC ACID, L-; DELPHINIUM STAPHISAGRIA SEED; COMFREY ROOT; ECHINACEA, UNSPECIFIED; GOLDENSEAL</SubstanceName>
<StrengthNumber>15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 3; 3</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Sports Recovery Formulated for workout recovery and for symptoms associated with injury, overexertion and emotional distress.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70518-1108-0</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (70518-1108-0) </PackageDescription>
<NDC11Code>70518-1108-00</NDC11Code>
<ProductNDC>70518-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078154</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam tablets USP are indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam tablets USP are indicated for adjunctive therapy for treatment of: 1 Partial onset seizures in patients one month of age and older with epilepsy ( 1.1) , 2 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy ( 1.2) , 3 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy ( 1.3) .</IndicationAndUsage>
<Description>Levetiracetam USP is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1000 mg (white) tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent). Levetiracetam tablets USP contain the labeled amount of levetiracetam. For 250 mg, 500 mg and 750 mg strengths. Inactive ingredients: colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake. 500 mg tablets: Yellow Iron Oxide. 750 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake, FD&C Yellow No. 6/sunset yellow FCF Aluminum Lake, iron oxide red. For 1000 mg strength. Inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0046-1108-11</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (0046-1108-11) / 28 TABLET, SUGAR COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00046-1108-11</NDC11Code>
<ProductNDC>0046-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prempro</ProprietaryName>
<NonProprietaryName>Conjugated Estrogens And Medroxyprogesterone Acetate</NonProprietaryName>
<DosageFormName>TABLET, SUGAR COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121203</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020527</ApplicationNumber>
<LabelerName>Wyeth Pharmaceuticals LLC, a subsidiary of Pfizer Inc.</LabelerName>
<SubstanceName>ESTROGENS, CONJUGATED; MEDROXYPROGESTERONE ACETATE</SubstanceName>
<StrengthNumber>.625; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Estrogen Receptor Agonists [MoA], Estrogen [EPC], Estrogens, Conjugated (USP) [CS], Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Premarin (conjugated estrogens tablets, USP) for oral administration contains a mixture obtained exclusively from natural sources, occurring as the sodium salts of water-soluble estrogen sulfates blended to represent the average composition of material derived from pregnant mares' urine. It is a mixture of sodium estrone sulfate and sodium equilin sulfate. It contains as concomitant components, as sodium sulfate conjugates, 17 α-dihydroequilin, 17 α-estradiol and 17 β-dihydroequilin. Medroxyprogesterone acetate is a derivative of progesterone. It is a white to off-white, odorless, crystalline powder, stable in air, melting between 200°C and 210°C. It is freely soluble in chloroform, soluble in acetone and in dioxane, sparingly soluble in alcohol and in methanol, slightly soluble in ether, and insoluble in water. The chemical name for MPA is pregn-4-ene-3, 20-dione, 17-(acetyloxy)-6-methyl-, (6α)-. Its molecular formula is C24H34O4, with a molecular weight of 386.53. Its structural formula is. PREMPRO 0.3 mg/1.5 mg and 0.45 mg/1.5 mg tablets contain the following inactive ingredients: calcium phosphate tribasic, microcrystalline cellulose, carnauba wax, hypromellose, hydroxypropyl cellulose, sucrose, Eudragit NE 30D, lactose monohydrate, magnesium stearate, polyethylene glycol, titanium dioxide, yellow iron oxide, propylene glycol and black iron oxide. PREMPRO 0.625 mg/2.5 mg tablets contain the following inactive ingredients: calcium phosphate tribasic, microcrystalline cellulose, carnauba wax, hypromellose, hydroxypropyl cellulose, sucrose, Eudragit NE 30D, lactose monohydrate, magnesium stearate, polyethylene glycol, propylene glycol, titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide. PREMPRO 0.625 mg/5 mg tablets contain the following inactive ingredients: calcium phosphate tribasic, carnauba wax, Eudragit NE 30D, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sucrose, titanium dioxide, triethyl citrate, FD&C Blue No. 2, black iron oxide, and propylene glycol.</Description>
</NDC>
<NDC>
<NDCCode>22840-1108-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-1108-2) </PackageDescription>
<NDC11Code>22840-1108-02</NDC11Code>
<ProductNDC>22840-1108</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Dog Epithelia</ProprietaryName>
<NonProprietaryName>Canis Lupus Familiaris</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>CANIS LUPUS FAMILIARIS SKIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>22840-1108-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (22840-1108-4) </PackageDescription>
<NDC11Code>22840-1108-04</NDC11Code>
<ProductNDC>22840-1108</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Dog Epithelia</ProprietaryName>
<NonProprietaryName>Canis Lupus Familiaris</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>CANIS LUPUS FAMILIARIS SKIN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Cells, Epidermal [EXT], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Animal Skin Allergenic Extract [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>36987-1108-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-1108-1)</PackageDescription>
<NDC11Code>36987-1108-01</NDC11Code>
<ProductNDC>36987-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rat Epithelium</ProprietaryName>
<NonProprietaryName>Rat Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>RATTUS NORVEGICUS SKIN</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1108-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1108-2)</PackageDescription>
<NDC11Code>36987-1108-02</NDC11Code>
<ProductNDC>36987-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rat Epithelium</ProprietaryName>
<NonProprietaryName>Rat Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>RATTUS NORVEGICUS SKIN</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1108-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-1108-3)</PackageDescription>
<NDC11Code>36987-1108-03</NDC11Code>
<ProductNDC>36987-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rat Epithelium</ProprietaryName>
<NonProprietaryName>Rat Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>RATTUS NORVEGICUS SKIN</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-1108-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-1108-4)</PackageDescription>
<NDC11Code>36987-1108-04</NDC11Code>
<ProductNDC>36987-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rat Epithelium</ProprietaryName>
<NonProprietaryName>Rat Epithelium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>RATTUS NORVEGICUS SKIN</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Animal Skin Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Cells, Epidermal [EXT],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>59762-1108-1</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (59762-1108-1) </PackageDescription>
<NDC11Code>59762-1108-01</NDC11Code>
<ProductNDC>59762-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eplerenone</ProprietaryName>
<NonProprietaryName>Eplerenone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241114</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021437</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>EPLERENONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eplerenone is an aldosterone antagonist indicated for: 1 Improving survival of stable adult patients with symptomatic heart failure with reduced ejection fraction (HFrEF) after an acute myocardial infarction. (1.1), 2 The treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.2).</IndicationAndUsage>
<Description>Eplerenone tablets contain eplerenone, a blocker of aldosterone binding at the mineralocorticoid receptor. Eplerenone is chemically described as Pregn-4-ene-7,21-dicarboxylic acid, 9,11-epoxy-17-hydroxy-3-oxo-, γ-lactone, methyl ester, (7α,11α,17α)-. Its empirical formula is C24H30O6 and it has a molecular weight of 414.50. The structural formula of eplerenone is represented below. Eplerenone is an odorless, white to off-white crystalline powder. It is very slightly soluble in water, with its solubility essentially pH-independent. The octanol/water partition coefficient of eplerenone is approximately 7.1 at pH 7.0. Eplerenone tablets for oral administration contain 25 mg or 50 mg of eplerenone and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, red iron oxide, sodium lauryl sulfate, talc, titanium dioxide, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>59762-1108-2</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (59762-1108-2) </PackageDescription>
<NDC11Code>59762-1108-02</NDC11Code>
<ProductNDC>59762-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eplerenone</ProprietaryName>
<NonProprietaryName>Eplerenone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241114</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021437</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>EPLERENONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aldosterone Antagonist [EPC], Aldosterone Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Eplerenone is an aldosterone antagonist indicated for: 1 Improving survival of stable adult patients with symptomatic heart failure with reduced ejection fraction (HFrEF) after an acute myocardial infarction. (1.1), 2 The treatment of hypertension in adults, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.2).</IndicationAndUsage>
<Description>Eplerenone tablets contain eplerenone, a blocker of aldosterone binding at the mineralocorticoid receptor. Eplerenone is chemically described as Pregn-4-ene-7,21-dicarboxylic acid, 9,11-epoxy-17-hydroxy-3-oxo-, γ-lactone, methyl ester, (7α,11α,17α)-. Its empirical formula is C24H30O6 and it has a molecular weight of 414.50. The structural formula of eplerenone is represented below. Eplerenone is an odorless, white to off-white crystalline powder. It is very slightly soluble in water, with its solubility essentially pH-independent. The octanol/water partition coefficient of eplerenone is approximately 7.1 at pH 7.0. Eplerenone tablets for oral administration contain 25 mg or 50 mg of eplerenone and the following inactive ingredients: croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, red iron oxide, sodium lauryl sulfate, talc, titanium dioxide, and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>63629-1108-1</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (63629-1108-1) </PackageDescription>
<NDC11Code>63629-1108-01</NDC11Code>
<ProductNDC>63629-1108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phentermine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phentermine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200617</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040526</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>PHENTERMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-08-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phentermine hydrochloride is indicated as a short-term (a few weeks) adjunct in a regimen of weight reduction based on exercise, behavioral modification and caloric restriction in the management of exogenous obesity for patients with an initial body mass index ≥ 30 kg/m2, or ≥ 27 kg/m2 in the presence of other risk factors (e.g., controlled hypertension, diabetes, hyperlipidemia). Below is a chart of body mass index (BMI) based on various heights and weights. BMI is calculated by taking the patient's weight, in kilograms (kg), divided by the patient's height, in meters (m), squared. Metric conversions are as follows: pounds ÷ 2.2 = kg; inches × 0.0254 = meters. The limited usefulness of agents of this class, including phentermine hydrochloride tablets, [see Clinical Pharmacology (12.1, 12.2)] should be measured against possible risk factors inherent in their use such as those described below.</IndicationAndUsage>
<Description>Phentermine hydrochloride USP has the chemical name of α,α,-Dimethylphenethylamine hydrochloride. The structural formula is as follows. Phentermine hydrochloride is a white, odorless, hygroscopic, crystalline powder which is soluble in water and lower alcohols, slightly soluble in chloroform and insoluble in ether. Phentermine hydrochloride, an anorectic agent for oral administration, is available as a tablet containing 37.5 mg of phentermine hydrochloride (equivalent to 30 mg of phentermine base). Phentermine hydrochloride tablets contain the inactive ingredients: crospovidone, dibasic calcium phosphate dihydrate, FD&C Blue #1, magnesium stearate, and povidone.</Description>
</NDC>
<NDC>
<NDCCode>53002-0060-0</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (53002-0060-0) </PackageDescription>
<NDC11Code>53002-0060-00</NDC11Code>
<ProductNDC>53002-0060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201506</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients (1.1): 1 Cold Sores (Herpes Labialis), 2 Genital HerpesTreatment in immunocompetent patients (initial or recurrent episode)Suppression in immunocompetent or HIV-infected patientsReduction of transmission, 3 Herpes Zoster.</IndicationAndUsage>
<Description>Valacyclovir hydrochloride, USP is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride, USP equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients crospovidone, FD&C Blue No. 2, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide. The chemical name of valacyclovir hydrochloride, USP is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pKas for valacyclovir hydrochloride, USP are 1.90, 7.47, and 9.43. Valacyclovir hydrochloride, USP comply with USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>53002-0061-0</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (53002-0061-0) </PackageDescription>
<NDC11Code>53002-0061-00</NDC11Code>
<ProductNDC>53002-0061</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090682</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) : 1 Cold Sores (Herpes Labialis) , 2 Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-1-infected patients Reduction of transmission , 3 Herpes Zoster .</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir.Valacyclovir tablets, USP are for oral administration. Each tablet contains 556 mg or 1.112 grams of valacyclovir hydrochloride USP (hydrous) equivalent to 500 mg or 1 gram of valacyclovir, respectively, and the inactive ingredients crospovidone, FD&C blue #2/indigo carmine aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide.The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride USP (hydrous) is a white or almost white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pkas for valacyclovir hydrochloride are 1.90, 7.47, and 9.43.</Description>
</NDC>
<NDC>
<NDCCode>53002-0062-0</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (53002-0062-0) </PackageDescription>
<NDC11Code>53002-0062-00</NDC11Code>
<ProductNDC>53002-0062</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir</ProprietaryName>
<NonProprietaryName>Valacyclovir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203047</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir tablet, USP is a nucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) Cold Sores (Herpes Labialis) Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-infected patients Reduction of transmission Herpes Zoster Pediatric Patients (1.2) Cold Sores (Herpes Labialis) Chickenpox Limitations of Use (1.3) The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride USP equivalent to 500 mg or 1gm valacyclovir and the inactive ingredients crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. In addition to this 500 mg contains FD&C blue #2/ indigo carmine aluminum lake. The chemical name of valacyclovir hydrochloride is L-valine2-[(2-amino-1,6-dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester hydrochloride monohydrate. It has the following structural formula:. Valacyclovir hydrochloride USP (monohydrate)is a white or almost white powder with the molecular formula C 13H 23N 6O 5Cl and a molecular weight of 378.81. Valacyclovir hydrochloride USP is freely soluble in water and practically insoluble in 1-octanol. The pka for valacyclovir hydrochloride is 5.95. Valacyclovir Tablets USP, 500 gm and 1 g complies with USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>53002-0270-0</NDCCode>
<PackageDescription>50 TABLET in 1 BOTTLE (53002-0270-0) </PackageDescription>
<NDC11Code>53002-0270-00</NDC11Code>
<ProductNDC>53002-0270</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203834</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Herpes Zoster Infections: Acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
<Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir tablets, USP is a formulation for oral administration. Each Acyclovir Tablet contains 400 mg or 800 mg of acyclovir. In addition, each tablet contains the inactive ingredients colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 400 mg and 800 mg tablet also contains ferric oxide and FD&C blue lake # 2 Indigo carmine AL, respectively. Acyclovir USP is a white to off white crystalline powder, slightly hygroscopic with the molecular formula C 8H 11N 5O 3 and a molecular weight of 225.20. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 6H-Purin-6-one, 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-. It has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>53002-0271-0</NDCCode>
<PackageDescription>50 TABLET in 1 BOTTLE (53002-0271-0) </PackageDescription>
<NDC11Code>53002-0271-00</NDC11Code>
<ProductNDC>53002-0271</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091022</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075382</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acyclovir is indicated for the acute treatment of herpes zoster (shingles).</IndicationAndUsage>
<Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir tablets are formulations of an antiviral drug for oral administration. Each 800-mg tablet of acyclovir contains 800 mg of acyclovir and the inactive ingredients corn starch, microcrystalline cellulose, magnesium stearate, and sodium starch glycolate. Each 400-mg tablet of acyclovir contains 400 mg of acyclovir and the inactive ingredients corn starch, microcrystalline cellulose, magnesium stearate, and sodium starch glycolate. Acyclovir is a white, crystalline powder with the molecular formula C 8H 11N 5O 3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 6H-purin-6-one, 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]; it has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>53002-0272-0</NDCCode>
<PackageDescription>50 TABLET in 1 BOTTLE (53002-0272-0) </PackageDescription>
<NDC11Code>53002-0272-00</NDC11Code>
<ProductNDC>53002-0272</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209366</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>800</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acyclovir is indicated for the acute treatment of herpes zoster (shingles).</IndicationAndUsage>
<Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir Tablets are formulations for oral administration. Each 800-mg tablet of acyclovir contains 800mg of acyclovir and the inactive ingredients FD&C Blue No. 2, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. Each 400-mg tablet of acyclovir contains 400mg of acyclovir and the inactive ingredients magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. Acyclovir is a white, crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino -1, 9 -dihydro -9 - [(2-hydroxyethoxy) methyl]-6 H-purin-6 -one; it has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>53002-0670-0</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (53002-0670-0) </PackageDescription>
<NDC11Code>53002-0670-00</NDC11Code>
<ProductNDC>53002-0670</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204446</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-12-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>53002-0671-0</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (53002-0671-0) </PackageDescription>
<NDC11Code>53002-0671-00</NDC11Code>
<ProductNDC>53002-0671</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Monohydrate</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050207</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA050641</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of Doxycycline Monohydrate Capsules and other antibacterial drugs, Doxycycline Monohydrate Capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms: Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Calymmatobacterium granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug: Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug: Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections: Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline Monohydrate Capsules 100 mg, 75 mg, and 50 mg capsules contain doxycycline monohydrate equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8 H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, red iron oxide, and yellow iron oxide for the 50 mg and 100 mg strengths and black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10 for the 75 mg strength.</Description>
</NDC>
<NDC>
<NDCCode>53002-0672-0</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (53002-0672-0) </PackageDescription>
<NDC11Code>53002-0672-00</NDC11Code>
<ProductNDC>53002-0672</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204446</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>53002-0673-0</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (53002-0673-0) </PackageDescription>
<NDC11Code>53002-0673-00</NDC11Code>
<ProductNDC>53002-0673</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20001226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065053</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules, USP and other antibacterial drugs, doxycycline capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline capsules, USP are indicated for the treatment of the following infections:. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline capsules, USP are also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline capsules, USP are indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline capsules, USP are indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug:. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline capsules, USP are an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline capsules, USP may be a useful adjunct to amebicides. In severe acne, doxycycline capsules, USP may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules, USP 100 mg, 75 mg, and 50 mg contain doxycycline monohydrate, USP equivalent to 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the yellow crystalline powder is 4-(Dimethylamino)-1,4,4a,5,5a,6, 11,12a-octahydro-3,5,10,-12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacene-carboxamide monohydrate. Structural formula: 1 C22H24N2O8 H2O M.W. = 462.46.</Description>
</NDC>
<NDC>
<NDCCode>53002-0674-0</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (53002-0674-0) </PackageDescription>
<NDC11Code>53002-0674-00</NDC11Code>
<ProductNDC>53002-0674</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204446</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules, USP and other antibacterial drugs, doxycycline capsules, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections: Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms: Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug: Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug: Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections: Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules USP, 50 mg, 75 mg, and 100 mg contain doxycycline monohydrate equivalent to 50 mg, 75 mg, and 100 mg of doxycycline for oral administration. The chemical designation of the light yellow to pale yellow powder is 2-Naphthacenecarboxamide, 4-(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-,[4S-(4α,4aα,5a,5aα,6a,12aα)]-, monohydrate. Structural formula. C22H24N2O8 H2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains FD & C Red # 3, D&C Yellow # 10, titanium dioxide, gelatin, sodium lauryl sulfate for the 50 mg strength; iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide, gelatin, sodium lauryl sulfate for the 75 mg strength and iron oxide black, iron oxide red, iron oxide yellow, titanium dioxide, FD & C Red # 3, D&C Yellow # 10, gelatin, sodium lauryl sulfate for the 100 mg strength. The capsules are printed with edible ink containing shellac, titanium dioxide, black iron oxide, brown iron oxide and potassium hydroxide for 50 mg, 75 mg and 100 mg strengths.</Description>
</NDC>
<NDC>
<NDCCode>53002-0675-0</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (53002-0675-0) </PackageDescription>
<NDC11Code>53002-0675-00</NDC11Code>
<ProductNDC>53002-0675</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220801</StartMarketingDate>
<EndMarketingDate>20241231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065055</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<EndMarketingDatePackage>20241231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>