{
"NDC": [
{
"NDCCode": "53002-1526-2",
"PackageDescription": "20 CAPSULE in 1 BOTTLE (53002-1526-2) ",
"NDC11Code": "53002-1526-02",
"ProductNDC": "53002-1526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefdinir",
"NonProprietaryName": "Cefdinir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20080107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065434",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "CEFDINIR",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir and other antibacterial drugs, cefdinir should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.Cefdinir capsules, USP are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.",
"Description": "Cefdinir capsules, USP contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α, 7β (Z)]]-7-[[(2-amino-4-thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir USP is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C14H13N5O5S2 and the molecular weight is 395.42. Cefdinir has the structural formula shown below. Cefdinir capsules, USP contain 300 mg cefdinir USP and the following inactive ingredients: carboxymethylcellulose calcium, colloidal silicon dioxide and magnesium stearate. The empty hard gelatin capsule shells contain FD&C Blue #1, D&C Red #28, titanium dioxide, gelatin and sodium lauryl sulphate. The capsules are printed with edible ink containing black iron oxide and shellac."
},
{
"NDCCode": "53002-1526-1",
"PackageDescription": "10 CAPSULE in 1 BOTTLE (53002-1526-1) ",
"NDC11Code": "53002-1526-01",
"ProductNDC": "53002-1526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefdinir",
"NonProprietaryName": "Cefdinir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20080107",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065434",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "CEFDINIR",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir and other antibacterial drugs, cefdinir should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.Cefdinir capsules, USP are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.",
"Description": "Cefdinir capsules, USP contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α, 7β (Z)]]-7-[[(2-amino-4-thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir USP is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C14H13N5O5S2 and the molecular weight is 395.42. Cefdinir has the structural formula shown below. Cefdinir capsules, USP contain 300 mg cefdinir USP and the following inactive ingredients: carboxymethylcellulose calcium, colloidal silicon dioxide and magnesium stearate. The empty hard gelatin capsule shells contain FD&C Blue #1, D&C Red #28, titanium dioxide, gelatin and sodium lauryl sulphate. The capsules are printed with edible ink containing black iron oxide and shellac."
},
{
"NDCCode": "0115-1526-08",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (0115-1526-08) / 15 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0115-1526-68) ",
"NDC11Code": "00115-1526-08",
"ProductNDC": "0115-1526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20150109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200828",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150109",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine is indicated for. Epilepsy—adjunctive therapy in patients aged 2 years and older: 1 partial-onset seizures., 2 primary generalized tonic-clonic seizures., 3 generalized seizures of Lennox-Gastaut syndrome (1.1).",
"Description": "Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Its chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine is a white to pale cream-colored powder and has a pKa of 5.7. Lamotrigine is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is. Lamotrigine orally disintegrating tablets are supplied for oral administration. The tablets contain 25 mg (white to off-white), 50 mg (white to off-white), 100 mg (white to off-white), or 200 mg (white to off-white) of lamotrigine and the following inactive ingredients: amino methacrylate copolymer, aspartame, black currant flavor, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, pregelatinized maize starch, sodium chloride, and stearic acid. Lamotrigine orally disintegrating tablets are formulated using granulation technology in which the lamotrigine drug substance is granulated with stearic acid and eudragit EPO for taste masking. The formulation contains flavor and has a good mouth feel, no grittiness, no after taste, better palatability and gives a desired dissolution profile."
},
{
"NDCCode": "10742-1526-1",
"PackageDescription": "1 TUBE in 1 BLISTER PACK (10742-1526-1) > 2 g in 1 TUBE",
"NDC11Code": "10742-1526-01",
"ProductNDC": "10742-1526",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Softlips Jelly Bean",
"NonProprietaryName": "Dimethicone, Octinoxate, Octisalate, Oxybenzone",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130215",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "The Mentholatum Company",
"SubstanceName": "DIMETHICONE; OCTINOXATE; OCTISALATE; OXYBENZONE",
"StrengthNumber": "20; 75; 30; 30",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "36987-1526-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-1526-2)",
"NDC11Code": "36987-1526-02",
"ProductNDC": "36987-1526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Almond",
"NonProprietaryName": "Almond",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "ALMOND",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Nut Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-1526-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-1526-2) ",
"NDC11Code": "37662-1526-02",
"ProductNDC": "37662-1526",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Magnesium Metallicum",
"NonProprietaryName": "Magnesium Metallicum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220914",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "MAGNESIUM",
"StrengthNumber": "500",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220914",
"SamplePackage": "N"
},
{
"NDCCode": "51552-1526-2",
"PackageDescription": "25 g in 1 CONTAINER (51552-1526-2) ",
"NDC11Code": "51552-1526-02",
"ProductNDC": "51552-1526",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Ethoxy Diglycol",
"DosageFormName": "LIQUID",
"StartMarketingDate": "20160915",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Fagron Inc",
"SubstanceName": "DIETHYLENE GLYCOL MONOETHYL ETHER",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "15-SEP-16"
},
{
"NDCCode": "63629-1526-2",
"PackageDescription": "30 TABLET in 1 BOTTLE (63629-1526-2) ",
"NDC11Code": "63629-1526-02",
"ProductNDC": "63629-1526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enalapril Maleate",
"NonProprietaryName": "Enalapril Maleate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075483",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ENALAPRIL MALEATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220208",
"SamplePackage": "N",
"IndicationAndUsage": "Enalapril maleate is indicated for the treatment of hypertension. Enalapril maleate is effective alone or in combination with other antihypertensive agents, especially thiazide-type diuretics. The blood pressure lowering effects of enalapril maleate and thiazides are approximately additive.",
"Description": "Enalapril maleate is the maleate salt of enalapril, the ethyl ester of a long-acting angiotensin-converting enzyme inhibitor, enalaprilat. Enalapril maleate is chemically described as (S)-1-[ N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-alanyl]-L-proline, ( Z)-2-butenedioate salt (1:1). Its molecular formula is C 20H 28N 2O 5●C 4H 4O 4, and its structural formula is:. Enalapril maleate is a white to off-white, crystalline powder with a molecular weight of 492.53. It is sparingly soluble in water, soluble in ethanol, and freely soluble in methanol. Enalapril is a pro-drug; following oral administration, it is bioactivated by hydrolysis of the ethyl ester to enalaprilat, which is the active angiotensin-converting enzyme inhibitor. Enalapril maleate is supplied as 2.5 mg, 5 mg, 10 mg, and 20 mg tablets for oral administration. In addition to the active ingredient enalapril maleate, each tablet contains the following inactive ingredients: hypromellose, anhydrous lactose, corn starch, stearic acid and talc. The 10 mg and 20 mg tablets also contain iron oxides."
},
{
"NDCCode": "71335-1526-2",
"PackageDescription": "10 TABLET in 1 BOTTLE (71335-1526-2) ",
"NDC11Code": "71335-1526-02",
"ProductNDC": "71335-1526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Letrozole",
"NonProprietaryName": "Letrozole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110604",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200161",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LETROZOLE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aromatase Inhibitor [EPC], Aromatase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200227",
"SamplePackage": "N",
"IndicationAndUsage": "Letrozole tablets are an aromatase inhibitor indicated for: 1 Adjuvant treatment of postmenopausal women with hormone receptor positive early breast cancer. (1.1), 2 Extended adjuvant treatment of postmenopausal women with early breast cancer who have received prior standard adjuvant tamoxifen therapy. (1.2), 3 First and second-line treatment of postmenopausal women with hormone receptor positive or unknown advanced breast cancer. (1.3).",
"Description": "Letrozole tablets for oral administration contain 2.5 mg of letrozole, a nonsteroidal aromatase inhibitor (inhibitor of estrogen synthesis). It is chemically described as 4,4'-(1H-1,2,4-Triazol-1-ylmethylene)dibenzonitrile, and its structural formula is. Letrozole is a white to yellowish crystalline powder, practically odorless, freely soluble in dichloromethane, slightly soluble in ethanol, and practically insoluble in water. It has a molecular weight of 285.31 g/mol, empirical formula C17H11N5, and a melting range of 184°C to 185°C. Letrozole tablets are available as 2.5 mg tablets for oral administration."
},
{
"NDCCode": "50090-1526-0",
"PackageDescription": "30 TABLET in 1 BOTTLE (50090-1526-0) ",
"NDC11Code": "50090-1526-00",
"ProductNDC": "50090-1526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070823",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078181",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20141211",
"SamplePackage": "N",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies ( 14.1)]. Limitations of Use. Glimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.",
"Description": "Glimepiride is an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C 24H 34N 4O 5S) with a molecular weight of 490.62. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder and is practically insoluble in water. The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, sodium starch glycolate, povidone, and magnesium stearate. In addition, glimepiride tablets, USP 1 mg contain ferric oxide red, glimepiride tablets, USP 2 mg contain ferric oxide yellow and FD &C blue #2 aluminum lake, and glimepiride tablets, USP 4 mg contain FD&C blue #2 aluminum lake."
},
{
"NDCCode": "50090-1526-1",
"PackageDescription": "100 TABLET in 1 BOTTLE (50090-1526-1) ",
"NDC11Code": "50090-1526-01",
"ProductNDC": "50090-1526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070823",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078181",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20141211",
"SamplePackage": "N",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies ( 14.1)]. Limitations of Use. Glimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.",
"Description": "Glimepiride is an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C 24H 34N 4O 5S) with a molecular weight of 490.62. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder and is practically insoluble in water. The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, sodium starch glycolate, povidone, and magnesium stearate. In addition, glimepiride tablets, USP 1 mg contain ferric oxide red, glimepiride tablets, USP 2 mg contain ferric oxide yellow and FD &C blue #2 aluminum lake, and glimepiride tablets, USP 4 mg contain FD&C blue #2 aluminum lake."
},
{
"NDCCode": "50090-1526-3",
"PackageDescription": "90 TABLET in 1 BOTTLE (50090-1526-3) ",
"NDC11Code": "50090-1526-03",
"ProductNDC": "50090-1526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070823",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078181",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20141211",
"SamplePackage": "N",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies ( 14.1)]. Limitations of Use. Glimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.",
"Description": "Glimepiride is an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C 24H 34N 4O 5S) with a molecular weight of 490.62. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder and is practically insoluble in water. The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, sodium starch glycolate, povidone, and magnesium stearate. In addition, glimepiride tablets, USP 1 mg contain ferric oxide red, glimepiride tablets, USP 2 mg contain ferric oxide yellow and FD &C blue #2 aluminum lake, and glimepiride tablets, USP 4 mg contain FD&C blue #2 aluminum lake."
},
{
"NDCCode": "50090-1526-4",
"PackageDescription": "180 TABLET in 1 BOTTLE (50090-1526-4) ",
"NDC11Code": "50090-1526-04",
"ProductNDC": "50090-1526",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070823",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078181",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea Compounds [CS], Sulfonylurea [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190126",
"SamplePackage": "N",
"IndicationAndUsage": "Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies ( 14.1)]. Limitations of Use. Glimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.",
"Description": "Glimepiride is an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C 24H 34N 4O 5S) with a molecular weight of 490.62. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder and is practically insoluble in water. The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, sodium starch glycolate, povidone, and magnesium stearate. In addition, glimepiride tablets, USP 1 mg contain ferric oxide red, glimepiride tablets, USP 2 mg contain ferric oxide yellow and FD &C blue #2 aluminum lake, and glimepiride tablets, USP 4 mg contain FD&C blue #2 aluminum lake."
},
{
"NDCCode": "53002-0060-1",
"PackageDescription": "2 TABLET, FILM COATED in 1 BOTTLE (53002-0060-1) ",
"NDC11Code": "53002-0060-01",
"ProductNDC": "53002-0060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201506",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20171001",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients (1.1): 1 Cold Sores (Herpes Labialis), 2 Genital HerpesTreatment in immunocompetent patients (initial or recurrent episode)Suppression in immunocompetent or HIV-infected patientsReduction of transmission, 3 Herpes Zoster.",
"Description": "Valacyclovir hydrochloride, USP is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride, USP equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients crospovidone, FD&C Blue No. 2, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide. The chemical name of valacyclovir hydrochloride, USP is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pKas for valacyclovir hydrochloride, USP are 1.90, 7.47, and 9.43. Valacyclovir hydrochloride, USP comply with USP dissolution test 2."
},
{
"NDCCode": "53002-0060-2",
"PackageDescription": "4 TABLET, FILM COATED in 1 BOTTLE (53002-0060-2) ",
"NDC11Code": "53002-0060-02",
"ProductNDC": "53002-0060",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201506",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20171001",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients (1.1): 1 Cold Sores (Herpes Labialis), 2 Genital HerpesTreatment in immunocompetent patients (initial or recurrent episode)Suppression in immunocompetent or HIV-infected patientsReduction of transmission, 3 Herpes Zoster.",
"Description": "Valacyclovir hydrochloride, USP is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride, USP equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients crospovidone, FD&C Blue No. 2, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide. The chemical name of valacyclovir hydrochloride, USP is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pKas for valacyclovir hydrochloride, USP are 1.90, 7.47, and 9.43. Valacyclovir hydrochloride, USP comply with USP dissolution test 2."
},
{
"NDCCode": "53002-0061-1",
"PackageDescription": "2 TABLET, FILM COATED in 1 BOTTLE (53002-0061-1) ",
"NDC11Code": "53002-0061-01",
"ProductNDC": "53002-0061",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090682",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) : 1 Cold Sores (Herpes Labialis) , 2 Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-1-infected patients Reduction of transmission , 3 Herpes Zoster .",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir.Valacyclovir tablets, USP are for oral administration. Each tablet contains 556 mg or 1.112 grams of valacyclovir hydrochloride USP (hydrous) equivalent to 500 mg or 1 gram of valacyclovir, respectively, and the inactive ingredients crospovidone, FD&C blue #2/indigo carmine aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide.The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride USP (hydrous) is a white or almost white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pkas for valacyclovir hydrochloride are 1.90, 7.47, and 9.43."
},
{
"NDCCode": "53002-0061-2",
"PackageDescription": "4 TABLET, FILM COATED in 1 BOTTLE (53002-0061-2) ",
"NDC11Code": "53002-0061-02",
"ProductNDC": "53002-0061",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090682",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) : 1 Cold Sores (Herpes Labialis) , 2 Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-1-infected patients Reduction of transmission , 3 Herpes Zoster .",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir.Valacyclovir tablets, USP are for oral administration. Each tablet contains 556 mg or 1.112 grams of valacyclovir hydrochloride USP (hydrous) equivalent to 500 mg or 1 gram of valacyclovir, respectively, and the inactive ingredients crospovidone, FD&C blue #2/indigo carmine aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide.The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride USP (hydrous) is a white or almost white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pkas for valacyclovir hydrochloride are 1.90, 7.47, and 9.43."
},
{
"NDCCode": "53002-0062-1",
"PackageDescription": "2 TABLET, FILM COATED in 1 BOTTLE (53002-0062-1) ",
"NDC11Code": "53002-0062-01",
"ProductNDC": "53002-0062",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir",
"NonProprietaryName": "Valacyclovir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203047",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240101",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir tablet, USP is a nucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) Cold Sores (Herpes Labialis) Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-infected patients Reduction of transmission Herpes Zoster Pediatric Patients (1.2) Cold Sores (Herpes Labialis) Chickenpox Limitations of Use (1.3) The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride USP equivalent to 500 mg or 1gm valacyclovir and the inactive ingredients crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. In addition to this 500 mg contains FD&C blue #2/ indigo carmine aluminum lake. The chemical name of valacyclovir hydrochloride is L-valine2-[(2-amino-1,6-dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester hydrochloride monohydrate. It has the following structural formula:. Valacyclovir hydrochloride USP (monohydrate)is a white or almost white powder with the molecular formula C 13H 23N 6O 5Cl and a molecular weight of 378.81. Valacyclovir hydrochloride USP is freely soluble in water and practically insoluble in 1-octanol. The pka for valacyclovir hydrochloride is 5.95. Valacyclovir Tablets USP, 500 gm and 1 g complies with USP dissolution test 2."
},
{
"NDCCode": "53002-0062-2",
"PackageDescription": "4 TABLET, FILM COATED in 1 BOTTLE (53002-0062-2) ",
"NDC11Code": "53002-0062-02",
"ProductNDC": "53002-0062",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir",
"NonProprietaryName": "Valacyclovir",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203047",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240101",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir tablet, USP is a nucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) Cold Sores (Herpes Labialis) Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-infected patients Reduction of transmission Herpes Zoster Pediatric Patients (1.2) Cold Sores (Herpes Labialis) Chickenpox Limitations of Use (1.3) The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride USP equivalent to 500 mg or 1gm valacyclovir and the inactive ingredients crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. In addition to this 500 mg contains FD&C blue #2/ indigo carmine aluminum lake. The chemical name of valacyclovir hydrochloride is L-valine2-[(2-amino-1,6-dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester hydrochloride monohydrate. It has the following structural formula:. Valacyclovir hydrochloride USP (monohydrate)is a white or almost white powder with the molecular formula C 13H 23N 6O 5Cl and a molecular weight of 378.81. Valacyclovir hydrochloride USP is freely soluble in water and practically insoluble in 1-octanol. The pka for valacyclovir hydrochloride is 5.95. Valacyclovir Tablets USP, 500 gm and 1 g complies with USP dissolution test 2."
},
{
"NDCCode": "53002-0080-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (53002-0080-2) ",
"NDC11Code": "53002-0080-02",
"ProductNDC": "53002-0080",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20161015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202168",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2021-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20171001",
"SamplePackage": "N"
},
{
"NDCCode": "53002-0081-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (53002-0081-2) ",
"NDC11Code": "53002-0081-02",
"ProductNDC": "53002-0081",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20161015",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202168",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2021-07-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N"
},
{
"NDCCode": "53002-0082-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (53002-0082-2) ",
"NDC11Code": "53002-0082-02",
"ProductNDC": "53002-0082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091022",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075382",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210101",
"SamplePackage": "N",
"IndicationAndUsage": "Acyclovir is indicated for the acute treatment of herpes zoster (shingles).",
"Description": "Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir tablets are formulations of an antiviral drug for oral administration. Each 800-mg tablet of acyclovir contains 800 mg of acyclovir and the inactive ingredients corn starch, microcrystalline cellulose, magnesium stearate, and sodium starch glycolate. Each 400-mg tablet of acyclovir contains 400 mg of acyclovir and the inactive ingredients corn starch, microcrystalline cellulose, magnesium stearate, and sodium starch glycolate. Acyclovir is a white, crystalline powder with the molecular formula C 8H 11N 5O 3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 6H-purin-6-one, 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]; it has the following structural formula:."
},
{
"NDCCode": "53002-0083-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (53002-0083-2) ",
"NDC11Code": "53002-0083-02",
"ProductNDC": "53002-0083",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180504",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210401",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20221001",
"SamplePackage": "N",
"IndicationAndUsage": "Herpes Zoster Infections. Acyclovir is indicated for the acute treatment of herpes zoster (shingles). Genital Herpes. Acyclovir is indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox. Acyclovir is indicated for the treatment of chickenpox (varicella).",
"Description": "Acyclovir, USP is a synthetic nucleoside analogue active against herpesviruses. Acyclovir Capsules, USP and Acyclovir Tablets, USP are formulations for oral administration. Each capsule contains 200 mg of acyclovir, USP and the inactive ingredients corn starch, lactose monohydrate, magnesium stearate, and sodium lauryl sulfate. The capsule shell consists of gelatin, FD&C Blue No. 1, FD&C Red No. 3, FD&C Yellow No. 6 and titanium dioxide. Printed with edible black ink. Each 800 mg tablet of acyclovir contains 800 mg of acyclovir, USP and the inactive ingredients magnesium stearate, microcrystalline cellulose PH101, povidone K30, and sodium starch glycolate (Type A) (Starch from Non GMO potatoes). Each 400 mg tablet of acyclovir contains 400 mg of acyclovir, USP and the inactive ingredients magnesium stearate, microcrystalline cellulose PH101, povidone K30, and sodium starch glycolate (Type A) (Starch from Non GMO potatoes). Acyclovir, USP is a white, crystalline powder with the molecular formula C 8H 11N 5O 3 and a molecular weight of 225. The maximum solubility in water at 37℃ is 2.5mg/mL. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir, USP is 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula. VIROLOGY. Mechanism of Antiviral Action. Acyclovir is a synthetic purine nucleoside analogue with in vitro and in vivo inhibitory activity against herpes simplex virus types 1 (HSV-1), 2 (HSV-2), and varicella-zoster virus (VZV). The inhibitory activity of acyclovir is highly selective due to its affinity for the enzyme thymidine kinase (TK) encoded by HSV and VZV. This viral enzyme converts acyclovir into acyclovir monophosphate, a nucleotide analogue. The monophosphate is further converted into diphosphate by cellular guanylate kinase and into triphosphate by a number of cellular enzymes. In vitro, acyclovir triphosphate stops replication of herpes viral DNA. This is accomplished in 3 ways: 1) competitive inhibition of viral DNA polymerase, 2) incorporation into and termination of the growing viral DNA chain, and 3) inactivation of the viral DNA polymerase. The greater antiviral activity of acyclovir against HSV compared with VZV is due to its more efficient phosphorylation by the viral TK. Antiviral Activities. The quantitative relationship between the in vitro susceptibility of herpes viruses to antivirals and the clinical response to therapy has not been established in humans, and virus sensitivity testing has not been standardized. Sensitivity testing results, expressed as the concentration of drug required to inhibit by 50% the growth of virus in cell culture (IC 50 ), vary greatly depending upon a number of factors. Using plaque-reduction assays, the IC 50 against herpes simplex virus isolates ranges from 0.02 to 13.5 mcg/mL for HSV-1 and from 0.01 to 9.9 mcg/mL for HSV-2. The IC 50 for acyclovir against most laboratory strains and clinical isolates of VZV ranges from 0.12 to 10.8 mcg/mL. Acyclovir also demonstrates activity against the Oka vaccine strain of VZV with a mean IC 50 of 1.35 mcg/mL. Drug Resistance. Resistance of HSV and VZV to acyclovir can result from qualitative and quantitative changes in the viral TK and/or DNA polymerase. Clinical isolates of HSV and VZV with reduced susceptibility to acyclovir have been recovered from immunocompromised patients, especially with advanced HIV infection. While most of the acyclovir-resistant mutants isolated thus far from immunocompromised patients have been found to be TK-deficient mutants, other mutants involving the viral TK gene (TK partial and TK altered) and DNA polymerase have been isolated. TK-negative mutants may cause severe disease in infants and immunocompromised adults. The possibility of viral resistance to acyclovir should be considered in patients who show poor clinical response during therapy."
},
{
"NDCCode": "53002-0084-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (53002-0084-2) ",
"NDC11Code": "53002-0084-02",
"ProductNDC": "53002-0084",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209366",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Acyclovir is indicated for the acute treatment of herpes zoster (shingles).",
"Description": "Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir Tablets are formulations for oral administration. Each 800-mg tablet of acyclovir contains 800mg of acyclovir and the inactive ingredients FD&C Blue No. 2, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. Each 400-mg tablet of acyclovir contains 400mg of acyclovir and the inactive ingredients magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. Acyclovir is a white, crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino -1, 9 -dihydro -9 - [(2-hydroxyethoxy) methyl]-6 H-purin-6 -one; it has the following structural formula."
},
{
"NDCCode": "53002-0085-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (53002-0085-2) ",
"NDC11Code": "53002-0085-02",
"ProductNDC": "53002-0085",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acyclovir",
"NonProprietaryName": "Acyclovir",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203834",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ACYCLOVIR",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220101",
"SamplePackage": "N",
"IndicationAndUsage": "Herpes Zoster Infections: Acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).",
"Description": "Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir tablets, USP is a formulation for oral administration. Each Acyclovir Tablet contains 400 mg or 800 mg of acyclovir. In addition, each tablet contains the inactive ingredients colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 400 mg and 800 mg tablet also contains ferric oxide and FD&C blue lake # 2 Indigo carmine AL, respectively. Acyclovir USP is a white to off white crystalline powder, slightly hygroscopic with the molecular formula C 8H 11N 5O 3 and a molecular weight of 225.20. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 6H-Purin-6-one, 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-. It has the following structural formula:."
},
{
"NDCCode": "53002-0100-2",
"PackageDescription": "100 mL in 1 BOTTLE (53002-0100-2) ",
"NDC11Code": "53002-0100-02",
"ProductNDC": "53002-0100",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20050113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065089",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "400; 57",
"StrengthUnit": "mg/5mL; mg/5mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N",
"IndicationAndUsage": "Amoxicillin and clavulanate potassium tablets, amoxicillin and clavulanate potassium for oral suspension, and amoxicillin and clavulanate potassium tablets (chewable) are indicated for the treatment of infections in adults and pediatric patients, due to susceptible isolates of the designated bacteria in the conditions listed below: 1 Lower Respiratory Tract Infections – caused by beta–lactamase–producing isolates of Haemophilus influenzae and Moraxella catarrhalis. , 2 Acute Bacterial Otitis Media – caused by beta–lactamase–producing isolates of H. influenzae and M. catarrhalis. , 3 Sinusitis – caused by beta–lactamase–producing isolates of H. influenzae and M. catarrhalis. , 4 Skin and Skin Structure Infections – caused by beta–lactamase–producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species. , 5 Urinary Tract Infections – caused by beta–lactamase–producing isolates of E. coli, Klebsiella species, and Enterobacter species. .",
"Description": "Amoxicillin and clavulanate potassium tablets, amoxicillin and clavulanate potassium for oral suspension, and amoxicillin and clavulanate potassium tablets (chewable) are oral antibacterial combinations consisting of the semisynthetic antibiotic amoxicillin, USP and the beta–lactamase inhibitor, clavulanate potassium, USP (the potassium salt of clavulanic acid). Amoxicillin, USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6–aminopenicillanic acid. Chemically, amoxicillin, USP is (2S,5R,6R)–6–[(R)–(–)–2–Amino–2–(p–hydroxyphenyl)acetamido]–3,3–dimethyl–7–oxo–4–thia–1–azabicyclo[3.2.0]heptane–2–carboxylic acid trihydrate and has the following structural formula. C16H19N3O5S3H2O M.W. 419.45. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. Chemically, clavulanate potassium, USP is potassium (Z)-(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and has the following structural formula. C8H8KNO5 M.W. 237.25. Amoxicillin and Clavulanate Potassium Tablets, USP: 1 500 mg/125 mg: Each tablet contains 500 mg of amoxicillin, USP as the trihydrate, and 125 mg of clavulanic acid (equivalent to 149 mg of clavulanate potassium)., 2 875 mg/125 mg: Each tablet contains 875 mg of amoxicillin, USP as the trihydrate, and 125 mg of clavulanic acid (equivalent to 149 mg of clavulanate potassium)."
},
{
"NDCCode": "53002-0101-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (53002-0101-2) ",
"NDC11Code": "53002-0101-02",
"ProductNDC": "53002-0101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine",
"NonProprietaryName": "Acetaminophen And Codeine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040779",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 30",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). : 1 Have not provided adequate analgesia, or are not expected to provide adequate analgesia, .",
"Description": "Acetaminophen and codeine phosphate tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula:. Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula:. Each Acetaminophen and Codeine Phosphate Tablet, USP (300 mg/30 mg) contains. Acetaminophen .................................................. 300 mg Codeine Phosphate .............................................. 30 mg. In addition, each acetaminophen and codeine phosphate tablet, USP contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid."
},
{
"NDCCode": "53002-0102-2",
"PackageDescription": "20 TABLET in 1 BOTTLE (53002-0102-2) ",
"NDC11Code": "53002-0102-02",
"ProductNDC": "53002-0102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acetaminophen And Codeine Phosphate",
"NonProprietaryName": "Acetaminophen And Codeine Phosphate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20010531",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040419",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "ACETAMINOPHEN; CODEINE PHOSPHATE",
"StrengthNumber": "300; 30",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIII",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230101",
"SamplePackage": "N",
"IndicationAndUsage": "Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of UseBecause of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics): 1 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.",
"Description": "Acetaminophen and codeine phosphate tablets are supplied in tablet form for oral administration. Acetaminophen, 4′-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/15 mg) contains. Acetaminophen USP………………..…300 mgCodeine Phosphate USP……………….15 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/30 mg) contains. Acetaminophen USP……………..……300 mgCodeine Phosphate USP……………….30 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/60 mg) contains. Acetaminophen USP……………..……300 mgCodeine Phosphate USP……………….60 mg. In addition, each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid."
},
{
"NDCCode": "53002-0104-2",
"PackageDescription": "100 mL in 1 BOTTLE (53002-0104-2) ",
"NDC11Code": "53002-0104-02",
"ProductNDC": "53002-0104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin And Clavulanate Potassium",
"NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20111220",
"EndMarketingDate": "20241231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201090",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "AMOXICILLIN; CLAVULANATE POTASSIUM",
"StrengthNumber": "400; 57",
"StrengthUnit": "mg/5mL; mg/5mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240101",
"EndMarketingDatePackage": "20241231",
"SamplePackage": "N"
},
{
"NDCCode": "53002-0130-2",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (53002-0130-2) ",
"NDC11Code": "53002-0130-02",
"ProductNDC": "53002-0130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20051109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065256",
"LabelerName": "RPK Pharmaceuticals, Inc.",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "875",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20171001",
"SamplePackage": "N",
"IndicationAndUsage": "Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat: Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcus species. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcus spp., or Haemophilus influenzae.",
"Description": "Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2S,5R,6R)-6-[(R)-(-)-2-amino-2-(p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C16H19N3O5S.3H2O, and the molecular weight is 419.45.Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>53002-1526-2</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE (53002-1526-2) </PackageDescription>
<NDC11Code>53002-1526-02</NDC11Code>
<ProductNDC>53002-1526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefdinir</ProprietaryName>
<NonProprietaryName>Cefdinir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065434</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CEFDINIR</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir and other antibacterial drugs, cefdinir should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.Cefdinir capsules, USP are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
<Description>Cefdinir capsules, USP contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α, 7β (Z)]]-7-[[(2-amino-4-thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir USP is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C14H13N5O5S2 and the molecular weight is 395.42. Cefdinir has the structural formula shown below. Cefdinir capsules, USP contain 300 mg cefdinir USP and the following inactive ingredients: carboxymethylcellulose calcium, colloidal silicon dioxide and magnesium stearate. The empty hard gelatin capsule shells contain FD&C Blue #1, D&C Red #28, titanium dioxide, gelatin and sodium lauryl sulphate. The capsules are printed with edible ink containing black iron oxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>53002-1526-1</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE (53002-1526-1) </PackageDescription>
<NDC11Code>53002-1526-01</NDC11Code>
<ProductNDC>53002-1526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefdinir</ProprietaryName>
<NonProprietaryName>Cefdinir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080107</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065434</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CEFDINIR</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir and other antibacterial drugs, cefdinir should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.Cefdinir capsules, USP are indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
<Description>Cefdinir capsules, USP contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α, 7β (Z)]]-7-[[(2-amino-4-thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir USP is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C14H13N5O5S2 and the molecular weight is 395.42. Cefdinir has the structural formula shown below. Cefdinir capsules, USP contain 300 mg cefdinir USP and the following inactive ingredients: carboxymethylcellulose calcium, colloidal silicon dioxide and magnesium stearate. The empty hard gelatin capsule shells contain FD&C Blue #1, D&C Red #28, titanium dioxide, gelatin and sodium lauryl sulphate. The capsules are printed with edible ink containing black iron oxide and shellac.</Description>
</NDC>
<NDC>
<NDCCode>0115-1526-08</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (0115-1526-08) / 15 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0115-1526-68) </PackageDescription>
<NDC11Code>00115-1526-08</NDC11Code>
<ProductNDC>0115-1526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200828</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine is indicated for. Epilepsy—adjunctive therapy in patients aged 2 years and older: 1 partial-onset seizures., 2 primary generalized tonic-clonic seizures., 3 generalized seizures of Lennox-Gastaut syndrome (1.1).</IndicationAndUsage>
<Description>Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Its chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine is a white to pale cream-colored powder and has a pKa of 5.7. Lamotrigine is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is. Lamotrigine orally disintegrating tablets are supplied for oral administration. The tablets contain 25 mg (white to off-white), 50 mg (white to off-white), 100 mg (white to off-white), or 200 mg (white to off-white) of lamotrigine and the following inactive ingredients: amino methacrylate copolymer, aspartame, black currant flavor, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, pregelatinized maize starch, sodium chloride, and stearic acid. Lamotrigine orally disintegrating tablets are formulated using granulation technology in which the lamotrigine drug substance is granulated with stearic acid and eudragit EPO for taste masking. The formulation contains flavor and has a good mouth feel, no grittiness, no after taste, better palatability and gives a desired dissolution profile.</Description>
</NDC>
<NDC>
<NDCCode>10742-1526-1</NDCCode>
<PackageDescription>1 TUBE in 1 BLISTER PACK (10742-1526-1) > 2 g in 1 TUBE</PackageDescription>
<NDC11Code>10742-1526-01</NDC11Code>
<ProductNDC>10742-1526</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Softlips Jelly Bean</ProprietaryName>
<NonProprietaryName>Dimethicone, Octinoxate, Octisalate, Oxybenzone</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130215</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>The Mentholatum Company</LabelerName>
<SubstanceName>DIMETHICONE; OCTINOXATE; OCTISALATE; OXYBENZONE</SubstanceName>
<StrengthNumber>20; 75; 30; 30</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>36987-1526-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-1526-2)</PackageDescription>
<NDC11Code>36987-1526-02</NDC11Code>
<ProductNDC>36987-1526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Almond</ProprietaryName>
<NonProprietaryName>Almond</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>ALMOND</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Nut Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-1526-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-1526-2) </PackageDescription>
<NDC11Code>37662-1526-02</NDC11Code>
<ProductNDC>37662-1526</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Magnesium Metallicum</ProprietaryName>
<NonProprietaryName>Magnesium Metallicum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220914</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>MAGNESIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>51552-1526-2</NDCCode>
<PackageDescription>25 g in 1 CONTAINER (51552-1526-2) </PackageDescription>
<NDC11Code>51552-1526-02</NDC11Code>
<ProductNDC>51552-1526</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Ethoxy Diglycol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<StartMarketingDate>20160915</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Fagron Inc</LabelerName>
<SubstanceName>DIETHYLENE GLYCOL MONOETHYL ETHER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>15-SEP-16</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>63629-1526-2</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (63629-1526-2) </PackageDescription>
<NDC11Code>63629-1526-02</NDC11Code>
<ProductNDC>63629-1526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enalapril Maleate</ProprietaryName>
<NonProprietaryName>Enalapril Maleate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075483</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ENALAPRIL MALEATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA], Decreased Blood Pressure [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enalapril maleate is indicated for the treatment of hypertension. Enalapril maleate is effective alone or in combination with other antihypertensive agents, especially thiazide-type diuretics. The blood pressure lowering effects of enalapril maleate and thiazides are approximately additive.</IndicationAndUsage>
<Description>Enalapril maleate is the maleate salt of enalapril, the ethyl ester of a long-acting angiotensin-converting enzyme inhibitor, enalaprilat. Enalapril maleate is chemically described as (S)-1-[ N-[1-(ethoxycarbonyl)-3-phenylpropyl]-L-alanyl]-L-proline, ( Z)-2-butenedioate salt (1:1). Its molecular formula is C 20H 28N 2O 5●C 4H 4O 4, and its structural formula is:. Enalapril maleate is a white to off-white, crystalline powder with a molecular weight of 492.53. It is sparingly soluble in water, soluble in ethanol, and freely soluble in methanol. Enalapril is a pro-drug; following oral administration, it is bioactivated by hydrolysis of the ethyl ester to enalaprilat, which is the active angiotensin-converting enzyme inhibitor. Enalapril maleate is supplied as 2.5 mg, 5 mg, 10 mg, and 20 mg tablets for oral administration. In addition to the active ingredient enalapril maleate, each tablet contains the following inactive ingredients: hypromellose, anhydrous lactose, corn starch, stearic acid and talc. The 10 mg and 20 mg tablets also contain iron oxides.</Description>
</NDC>
<NDC>
<NDCCode>71335-1526-2</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (71335-1526-2) </PackageDescription>
<NDC11Code>71335-1526-02</NDC11Code>
<ProductNDC>71335-1526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Letrozole</ProprietaryName>
<NonProprietaryName>Letrozole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110604</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200161</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LETROZOLE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aromatase Inhibitor [EPC], Aromatase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Letrozole tablets are an aromatase inhibitor indicated for: 1 Adjuvant treatment of postmenopausal women with hormone receptor positive early breast cancer. (1.1), 2 Extended adjuvant treatment of postmenopausal women with early breast cancer who have received prior standard adjuvant tamoxifen therapy. (1.2), 3 First and second-line treatment of postmenopausal women with hormone receptor positive or unknown advanced breast cancer. (1.3).</IndicationAndUsage>
<Description>Letrozole tablets for oral administration contain 2.5 mg of letrozole, a nonsteroidal aromatase inhibitor (inhibitor of estrogen synthesis). It is chemically described as 4,4'-(1H-1,2,4-Triazol-1-ylmethylene)dibenzonitrile, and its structural formula is. Letrozole is a white to yellowish crystalline powder, practically odorless, freely soluble in dichloromethane, slightly soluble in ethanol, and practically insoluble in water. It has a molecular weight of 285.31 g/mol, empirical formula C17H11N5, and a melting range of 184°C to 185°C. Letrozole tablets are available as 2.5 mg tablets for oral administration.</Description>
</NDC>
<NDC>
<NDCCode>50090-1526-0</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (50090-1526-0) </PackageDescription>
<NDC11Code>50090-1526-00</NDC11Code>
<ProductNDC>50090-1526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070823</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078181</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies ( 14.1)]. Limitations of Use. Glimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.</IndicationAndUsage>
<Description>Glimepiride is an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C 24H 34N 4O 5S) with a molecular weight of 490.62. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder and is practically insoluble in water. The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, sodium starch glycolate, povidone, and magnesium stearate. In addition, glimepiride tablets, USP 1 mg contain ferric oxide red, glimepiride tablets, USP 2 mg contain ferric oxide yellow and FD &C blue #2 aluminum lake, and glimepiride tablets, USP 4 mg contain FD&C blue #2 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>50090-1526-1</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (50090-1526-1) </PackageDescription>
<NDC11Code>50090-1526-01</NDC11Code>
<ProductNDC>50090-1526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070823</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078181</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies ( 14.1)]. Limitations of Use. Glimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.</IndicationAndUsage>
<Description>Glimepiride is an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C 24H 34N 4O 5S) with a molecular weight of 490.62. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder and is practically insoluble in water. The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, sodium starch glycolate, povidone, and magnesium stearate. In addition, glimepiride tablets, USP 1 mg contain ferric oxide red, glimepiride tablets, USP 2 mg contain ferric oxide yellow and FD &C blue #2 aluminum lake, and glimepiride tablets, USP 4 mg contain FD&C blue #2 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>50090-1526-3</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (50090-1526-3) </PackageDescription>
<NDC11Code>50090-1526-03</NDC11Code>
<ProductNDC>50090-1526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070823</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078181</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20141211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies ( 14.1)]. Limitations of Use. Glimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.</IndicationAndUsage>
<Description>Glimepiride is an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C 24H 34N 4O 5S) with a molecular weight of 490.62. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder and is practically insoluble in water. The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, sodium starch glycolate, povidone, and magnesium stearate. In addition, glimepiride tablets, USP 1 mg contain ferric oxide red, glimepiride tablets, USP 2 mg contain ferric oxide yellow and FD &C blue #2 aluminum lake, and glimepiride tablets, USP 4 mg contain FD&C blue #2 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>50090-1526-4</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (50090-1526-4) </PackageDescription>
<NDC11Code>50090-1526-04</NDC11Code>
<ProductNDC>50090-1526</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070823</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078181</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea Compounds [CS], Sulfonylurea [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190126</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glimepiride tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus [see Clinical Studies ( 14.1)]. Limitations of Use. Glimepiride tablets should not be used for the treatment of type 1 diabetes mellitus or diabetic ketoacidosis, as it would not be effective in these settings.</IndicationAndUsage>
<Description>Glimepiride is an oral sulfonylurea that contains the active ingredient glimepiride. Chemically, glimepiride is identified as 1-[[p-[2-(3-ethyl-4-methyl-2-oxo-3-pyrroline-1carboxamido) ethyl]phenyl]sulfonyl]-3-(trans-4-methylcyclohexyl)urea (C 24H 34N 4O 5S) with a molecular weight of 490.62. Glimepiride is a white to yellowish-white, crystalline, odorless to practically odorless powder and is practically insoluble in water. The structural formula is. Glimepiride tablets, USP contain the active ingredient glimepiride and the following inactive ingredients: lactose monohydrate, sodium starch glycolate, povidone, and magnesium stearate. In addition, glimepiride tablets, USP 1 mg contain ferric oxide red, glimepiride tablets, USP 2 mg contain ferric oxide yellow and FD &C blue #2 aluminum lake, and glimepiride tablets, USP 4 mg contain FD&C blue #2 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>53002-0060-1</NDCCode>
<PackageDescription>2 TABLET, FILM COATED in 1 BOTTLE (53002-0060-1) </PackageDescription>
<NDC11Code>53002-0060-01</NDC11Code>
<ProductNDC>53002-0060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201506</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients (1.1): 1 Cold Sores (Herpes Labialis), 2 Genital HerpesTreatment in immunocompetent patients (initial or recurrent episode)Suppression in immunocompetent or HIV-infected patientsReduction of transmission, 3 Herpes Zoster.</IndicationAndUsage>
<Description>Valacyclovir hydrochloride, USP is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride, USP equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients crospovidone, FD&C Blue No. 2, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide. The chemical name of valacyclovir hydrochloride, USP is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pKas for valacyclovir hydrochloride, USP are 1.90, 7.47, and 9.43. Valacyclovir hydrochloride, USP comply with USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>53002-0060-2</NDCCode>
<PackageDescription>4 TABLET, FILM COATED in 1 BOTTLE (53002-0060-2) </PackageDescription>
<NDC11Code>53002-0060-02</NDC11Code>
<ProductNDC>53002-0060</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201506</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients (1.1): 1 Cold Sores (Herpes Labialis), 2 Genital HerpesTreatment in immunocompetent patients (initial or recurrent episode)Suppression in immunocompetent or HIV-infected patientsReduction of transmission, 3 Herpes Zoster.</IndicationAndUsage>
<Description>Valacyclovir hydrochloride, USP is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride, USP equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients crospovidone, FD&C Blue No. 2, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide. The chemical name of valacyclovir hydrochloride, USP is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pKas for valacyclovir hydrochloride, USP are 1.90, 7.47, and 9.43. Valacyclovir hydrochloride, USP comply with USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>53002-0061-1</NDCCode>
<PackageDescription>2 TABLET, FILM COATED in 1 BOTTLE (53002-0061-1) </PackageDescription>
<NDC11Code>53002-0061-01</NDC11Code>
<ProductNDC>53002-0061</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090682</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) : 1 Cold Sores (Herpes Labialis) , 2 Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-1-infected patients Reduction of transmission , 3 Herpes Zoster .</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir.Valacyclovir tablets, USP are for oral administration. Each tablet contains 556 mg or 1.112 grams of valacyclovir hydrochloride USP (hydrous) equivalent to 500 mg or 1 gram of valacyclovir, respectively, and the inactive ingredients crospovidone, FD&C blue #2/indigo carmine aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide.The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride USP (hydrous) is a white or almost white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pkas for valacyclovir hydrochloride are 1.90, 7.47, and 9.43.</Description>
</NDC>
<NDC>
<NDCCode>53002-0061-2</NDCCode>
<PackageDescription>4 TABLET, FILM COATED in 1 BOTTLE (53002-0061-2) </PackageDescription>
<NDC11Code>53002-0061-02</NDC11Code>
<ProductNDC>53002-0061</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090682</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir hydrochloride is a deoxynucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) : 1 Cold Sores (Herpes Labialis) , 2 Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-1-infected patients Reduction of transmission , 3 Herpes Zoster .</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir.Valacyclovir tablets, USP are for oral administration. Each tablet contains 556 mg or 1.112 grams of valacyclovir hydrochloride USP (hydrous) equivalent to 500 mg or 1 gram of valacyclovir, respectively, and the inactive ingredients crospovidone, FD&C blue #2/indigo carmine aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide.The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride USP (hydrous) is a white or almost white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pkas for valacyclovir hydrochloride are 1.90, 7.47, and 9.43.</Description>
</NDC>
<NDC>
<NDCCode>53002-0062-1</NDCCode>
<PackageDescription>2 TABLET, FILM COATED in 1 BOTTLE (53002-0062-1) </PackageDescription>
<NDC11Code>53002-0062-01</NDC11Code>
<ProductNDC>53002-0062</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir</ProprietaryName>
<NonProprietaryName>Valacyclovir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203047</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir tablet, USP is a nucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) Cold Sores (Herpes Labialis) Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-infected patients Reduction of transmission Herpes Zoster Pediatric Patients (1.2) Cold Sores (Herpes Labialis) Chickenpox Limitations of Use (1.3) The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride USP equivalent to 500 mg or 1gm valacyclovir and the inactive ingredients crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. In addition to this 500 mg contains FD&C blue #2/ indigo carmine aluminum lake. The chemical name of valacyclovir hydrochloride is L-valine2-[(2-amino-1,6-dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester hydrochloride monohydrate. It has the following structural formula:. Valacyclovir hydrochloride USP (monohydrate)is a white or almost white powder with the molecular formula C 13H 23N 6O 5Cl and a molecular weight of 378.81. Valacyclovir hydrochloride USP is freely soluble in water and practically insoluble in 1-octanol. The pka for valacyclovir hydrochloride is 5.95. Valacyclovir Tablets USP, 500 gm and 1 g complies with USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>53002-0062-2</NDCCode>
<PackageDescription>4 TABLET, FILM COATED in 1 BOTTLE (53002-0062-2) </PackageDescription>
<NDC11Code>53002-0062-02</NDC11Code>
<ProductNDC>53002-0062</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir</ProprietaryName>
<NonProprietaryName>Valacyclovir</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203047</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir tablet, USP is a nucleoside analogue DNA polymerase inhibitor indicated for: Adult Patients (1.1) Cold Sores (Herpes Labialis) Genital Herpes Treatment in immunocompetent patients (initial or recurrent episode) Suppression in immunocompetent or HIV-infected patients Reduction of transmission Herpes Zoster Pediatric Patients (1.2) Cold Sores (Herpes Labialis) Chickenpox Limitations of Use (1.3) The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of the L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride USP equivalent to 500 mg or 1gm valacyclovir and the inactive ingredients crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, and titanium dioxide. In addition to this 500 mg contains FD&C blue #2/ indigo carmine aluminum lake. The chemical name of valacyclovir hydrochloride is L-valine2-[(2-amino-1,6-dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester hydrochloride monohydrate. It has the following structural formula:. Valacyclovir hydrochloride USP (monohydrate)is a white or almost white powder with the molecular formula C 13H 23N 6O 5Cl and a molecular weight of 378.81. Valacyclovir hydrochloride USP is freely soluble in water and practically insoluble in 1-octanol. The pka for valacyclovir hydrochloride is 5.95. Valacyclovir Tablets USP, 500 gm and 1 g complies with USP dissolution test 2.</Description>
</NDC>
<NDC>
<NDCCode>53002-0080-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (53002-0080-2) </PackageDescription>
<NDC11Code>53002-0080-02</NDC11Code>
<ProductNDC>53002-0080</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202168</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>53002-0081-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (53002-0081-2) </PackageDescription>
<NDC11Code>53002-0081-02</NDC11Code>
<ProductNDC>53002-0081</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161015</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202168</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-07-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>53002-0082-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (53002-0082-2) </PackageDescription>
<NDC11Code>53002-0082-02</NDC11Code>
<ProductNDC>53002-0082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091022</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075382</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acyclovir is indicated for the acute treatment of herpes zoster (shingles).</IndicationAndUsage>
<Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir tablets are formulations of an antiviral drug for oral administration. Each 800-mg tablet of acyclovir contains 800 mg of acyclovir and the inactive ingredients corn starch, microcrystalline cellulose, magnesium stearate, and sodium starch glycolate. Each 400-mg tablet of acyclovir contains 400 mg of acyclovir and the inactive ingredients corn starch, microcrystalline cellulose, magnesium stearate, and sodium starch glycolate. Acyclovir is a white, crystalline powder with the molecular formula C 8H 11N 5O 3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 6H-purin-6-one, 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]; it has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>53002-0083-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (53002-0083-2) </PackageDescription>
<NDC11Code>53002-0083-02</NDC11Code>
<ProductNDC>53002-0083</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180504</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210401</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Herpes Zoster Infections. Acyclovir is indicated for the acute treatment of herpes zoster (shingles). Genital Herpes. Acyclovir is indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox. Acyclovir is indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
<Description>Acyclovir, USP is a synthetic nucleoside analogue active against herpesviruses. Acyclovir Capsules, USP and Acyclovir Tablets, USP are formulations for oral administration. Each capsule contains 200 mg of acyclovir, USP and the inactive ingredients corn starch, lactose monohydrate, magnesium stearate, and sodium lauryl sulfate. The capsule shell consists of gelatin, FD&C Blue No. 1, FD&C Red No. 3, FD&C Yellow No. 6 and titanium dioxide. Printed with edible black ink. Each 800 mg tablet of acyclovir contains 800 mg of acyclovir, USP and the inactive ingredients magnesium stearate, microcrystalline cellulose PH101, povidone K30, and sodium starch glycolate (Type A) (Starch from Non GMO potatoes). Each 400 mg tablet of acyclovir contains 400 mg of acyclovir, USP and the inactive ingredients magnesium stearate, microcrystalline cellulose PH101, povidone K30, and sodium starch glycolate (Type A) (Starch from Non GMO potatoes). Acyclovir, USP is a white, crystalline powder with the molecular formula C 8H 11N 5O 3 and a molecular weight of 225. The maximum solubility in water at 37℃ is 2.5mg/mL. The pka’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir, USP is 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula. VIROLOGY. Mechanism of Antiviral Action. Acyclovir is a synthetic purine nucleoside analogue with in vitro and in vivo inhibitory activity against herpes simplex virus types 1 (HSV-1), 2 (HSV-2), and varicella-zoster virus (VZV). The inhibitory activity of acyclovir is highly selective due to its affinity for the enzyme thymidine kinase (TK) encoded by HSV and VZV. This viral enzyme converts acyclovir into acyclovir monophosphate, a nucleotide analogue. The monophosphate is further converted into diphosphate by cellular guanylate kinase and into triphosphate by a number of cellular enzymes. In vitro, acyclovir triphosphate stops replication of herpes viral DNA. This is accomplished in 3 ways: 1) competitive inhibition of viral DNA polymerase, 2) incorporation into and termination of the growing viral DNA chain, and 3) inactivation of the viral DNA polymerase. The greater antiviral activity of acyclovir against HSV compared with VZV is due to its more efficient phosphorylation by the viral TK. Antiviral Activities. The quantitative relationship between the in vitro susceptibility of herpes viruses to antivirals and the clinical response to therapy has not been established in humans, and virus sensitivity testing has not been standardized. Sensitivity testing results, expressed as the concentration of drug required to inhibit by 50% the growth of virus in cell culture (IC 50 ), vary greatly depending upon a number of factors. Using plaque-reduction assays, the IC 50 against herpes simplex virus isolates ranges from 0.02 to 13.5 mcg/mL for HSV-1 and from 0.01 to 9.9 mcg/mL for HSV-2. The IC 50 for acyclovir against most laboratory strains and clinical isolates of VZV ranges from 0.12 to 10.8 mcg/mL. Acyclovir also demonstrates activity against the Oka vaccine strain of VZV with a mean IC 50 of 1.35 mcg/mL. Drug Resistance. Resistance of HSV and VZV to acyclovir can result from qualitative and quantitative changes in the viral TK and/or DNA polymerase. Clinical isolates of HSV and VZV with reduced susceptibility to acyclovir have been recovered from immunocompromised patients, especially with advanced HIV infection. While most of the acyclovir-resistant mutants isolated thus far from immunocompromised patients have been found to be TK-deficient mutants, other mutants involving the viral TK gene (TK partial and TK altered) and DNA polymerase have been isolated. TK-negative mutants may cause severe disease in infants and immunocompromised adults. The possibility of viral resistance to acyclovir should be considered in patients who show poor clinical response during therapy.</Description>
</NDC>
<NDC>
<NDCCode>53002-0084-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (53002-0084-2) </PackageDescription>
<NDC11Code>53002-0084-02</NDC11Code>
<ProductNDC>53002-0084</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209366</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acyclovir is indicated for the acute treatment of herpes zoster (shingles).</IndicationAndUsage>
<Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir Tablets are formulations for oral administration. Each 800-mg tablet of acyclovir contains 800mg of acyclovir and the inactive ingredients FD&C Blue No. 2, magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate. Each 400-mg tablet of acyclovir contains 400mg of acyclovir and the inactive ingredients magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. Acyclovir is a white, crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225. The maximum solubility in water at 37°C is 2.5mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino -1, 9 -dihydro -9 - [(2-hydroxyethoxy) methyl]-6 H-purin-6 -one; it has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>53002-0085-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (53002-0085-2) </PackageDescription>
<NDC11Code>53002-0085-02</NDC11Code>
<ProductNDC>53002-0085</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acyclovir</ProprietaryName>
<NonProprietaryName>Acyclovir</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203834</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACYCLOVIR</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Herpes Zoster Infections: Acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
<Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir tablets, USP is a formulation for oral administration. Each Acyclovir Tablet contains 400 mg or 800 mg of acyclovir. In addition, each tablet contains the inactive ingredients colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 400 mg and 800 mg tablet also contains ferric oxide and FD&C blue lake # 2 Indigo carmine AL, respectively. Acyclovir USP is a white to off white crystalline powder, slightly hygroscopic with the molecular formula C 8H 11N 5O 3 and a molecular weight of 225.20. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 6H-Purin-6-one, 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-. It has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>53002-0100-2</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE (53002-0100-2) </PackageDescription>
<NDC11Code>53002-0100-02</NDC11Code>
<ProductNDC>53002-0100</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065089</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>400; 57</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amoxicillin and clavulanate potassium tablets, amoxicillin and clavulanate potassium for oral suspension, and amoxicillin and clavulanate potassium tablets (chewable) are indicated for the treatment of infections in adults and pediatric patients, due to susceptible isolates of the designated bacteria in the conditions listed below: 1 Lower Respiratory Tract Infections – caused by beta–lactamase–producing isolates of Haemophilus influenzae and Moraxella catarrhalis. , 2 Acute Bacterial Otitis Media – caused by beta–lactamase–producing isolates of H. influenzae and M. catarrhalis. , 3 Sinusitis – caused by beta–lactamase–producing isolates of H. influenzae and M. catarrhalis. , 4 Skin and Skin Structure Infections – caused by beta–lactamase–producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species. , 5 Urinary Tract Infections – caused by beta–lactamase–producing isolates of E. coli, Klebsiella species, and Enterobacter species. .</IndicationAndUsage>
<Description>Amoxicillin and clavulanate potassium tablets, amoxicillin and clavulanate potassium for oral suspension, and amoxicillin and clavulanate potassium tablets (chewable) are oral antibacterial combinations consisting of the semisynthetic antibiotic amoxicillin, USP and the beta–lactamase inhibitor, clavulanate potassium, USP (the potassium salt of clavulanic acid). Amoxicillin, USP is an analog of ampicillin, derived from the basic penicillin nucleus, 6–aminopenicillanic acid. Chemically, amoxicillin, USP is (2S,5R,6R)–6–[(R)–(–)–2–Amino–2–(p–hydroxyphenyl)acetamido]–3,3–dimethyl–7–oxo–4–thia–1–azabicyclo[3.2.0]heptane–2–carboxylic acid trihydrate and has the following structural formula. C16H19N3O5S3H2O M.W. 419.45. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. Chemically, clavulanate potassium, USP is potassium (Z)-(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate, and has the following structural formula. C8H8KNO5 M.W. 237.25. Amoxicillin and Clavulanate Potassium Tablets, USP: 1 500 mg/125 mg: Each tablet contains 500 mg of amoxicillin, USP as the trihydrate, and 125 mg of clavulanic acid (equivalent to 149 mg of clavulanate potassium)., 2 875 mg/125 mg: Each tablet contains 875 mg of amoxicillin, USP as the trihydrate, and 125 mg of clavulanic acid (equivalent to 149 mg of clavulanate potassium).</Description>
</NDC>
<NDC>
<NDCCode>53002-0101-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (53002-0101-2) </PackageDescription>
<NDC11Code>53002-0101-02</NDC11Code>
<ProductNDC>53002-0101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040779</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics). : 1 Have not provided adequate analgesia, or are not expected to provide adequate analgesia, .</IndicationAndUsage>
<Description>Acetaminophen and codeine phosphate tablets, USP are supplied in tablet form for oral administration. Acetaminophen, 4'-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula:. Codeine phosphate, 7,8-didehydro-4, 5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula:. Each Acetaminophen and Codeine Phosphate Tablet, USP (300 mg/30 mg) contains. Acetaminophen .................................................. 300 mg Codeine Phosphate .............................................. 30 mg. In addition, each acetaminophen and codeine phosphate tablet, USP contains the following inactive ingredients: croscarmellose sodium, crospovidone, lactose monohydrate, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>53002-0102-2</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (53002-0102-2) </PackageDescription>
<NDC11Code>53002-0102-02</NDC11Code>
<ProductNDC>53002-0102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acetaminophen And Codeine Phosphate</ProprietaryName>
<NonProprietaryName>Acetaminophen And Codeine Phosphate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20010531</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040419</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ACETAMINOPHEN; CODEINE PHOSPHATE</SubstanceName>
<StrengthNumber>300; 30</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acetaminophen and codeine phosphate tablets are indicated for the management of mild to moderate pain, where treatment with an opioid is appropriate and for which alternative treatments are inadequate. Limitations of UseBecause of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses (see WARNINGS), reserve acetaminophen and codeine phosphate tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics): 1 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Acetaminophen and codeine phosphate tablets are supplied in tablet form for oral administration. Acetaminophen, 4′-hydroxyacetanilide, a slightly bitter, white, odorless, crystalline powder, is a non-opiate, non-salicylate analgesic and antipyretic. It has the following structural formula. Codeine phosphate, 7,8-didehydro-4,5α-epoxy-3-methoxy-17-methylmorphinan-6α-ol phosphate (1:1) (salt) hemihydrate, a white crystalline powder, is a narcotic analgesic and antitussive. It has the following structural formula. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/15 mg) contains. Acetaminophen USP………………..…300 mgCodeine Phosphate USP……………….15 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/30 mg) contains. Acetaminophen USP……………..……300 mgCodeine Phosphate USP……………….30 mg. Each Acetaminophen and Codeine Phosphate Tablet USP (300 mg/60 mg) contains. Acetaminophen USP……………..……300 mgCodeine Phosphate USP……………….60 mg. In addition, each tablet contains the following inactive ingredients: crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>53002-0104-2</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE (53002-0104-2) </PackageDescription>
<NDC11Code>53002-0104-02</NDC11Code>
<ProductNDC>53002-0104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
<NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111220</StartMarketingDate>
<EndMarketingDate>20241231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201090</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
<StrengthNumber>400; 57</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240101</StartMarketingDatePackage>
<EndMarketingDatePackage>20241231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>53002-0130-2</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (53002-0130-2) </PackageDescription>
<NDC11Code>53002-0130-02</NDC11Code>
<ProductNDC>53002-0130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065256</ApplicationNumber>
<LabelerName>RPK Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>875</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Adults and Pediatric Patients: 1 Upper Respiratory Tract Infections of the Ear, Nose, and Throat: Amoxicillin tablets are indicated in the treatment of infections due to susceptible (ONLY β-lactamase-negative) isolates of Streptococcus species. (α- and β-hemolytic isolates only), Streptococcus pneumoniae, Staphylococcus spp., or Haemophilus influenzae.</IndicationAndUsage>
<Description>Amoxicillin tablets, USP are a semisynthetic antibacterial (amoxicillin), an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2S,5R,6R)-6-[(R)-(-)-2-amino-2-(p-hydroxyphenyl) acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C16H19N3O5S.3H2O, and the molecular weight is 419.45.Each film coated tablet contains 500 mg or 875 mg amoxicillin USP as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
</NDCList>