{
"NDC": [
{
"NDCCode": "54575-462-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-462-10)",
"NDC11Code": "54575-0462-10",
"ProductNDC": "54575-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Strawberry",
"NonProprietaryName": "Strawberry",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "STRAWBERRY",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "54575-462-02",
"PackageDescription": "2 mL in 1 VIAL, MULTI-DOSE (54575-462-02)",
"NDC11Code": "54575-0462-02",
"ProductNDC": "54575-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Strawberry",
"NonProprietaryName": "Strawberry",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "STRAWBERRY",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "54575-462-30",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (54575-462-30)",
"NDC11Code": "54575-0462-30",
"ProductNDC": "54575-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Strawberry",
"NonProprietaryName": "Strawberry",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "STRAWBERRY",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "54575-462-50",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (54575-462-50)",
"NDC11Code": "54575-0462-50",
"ProductNDC": "54575-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Strawberry",
"NonProprietaryName": "Strawberry",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "STRAWBERRY",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "21695-462-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (21695-462-10)",
"NDC11Code": "21695-0462-10",
"ProductNDC": "21695-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fexofenadine Hydrochloride",
"NonProprietaryName": "Fexofenadine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076502",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "FEXOFENADINE HYDROCHLORIDE",
"StrengthNumber": "180",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Fexofenadine hydrochloride is an H1-receptor antagonist indicated for. Relief of symptoms associated with seasonal allergic rhinitis in patients 6 years of age and older (1.1). Treatment of uncomplicated skin manifestations of chronic idiopathic urticaria in patients 6 years of age and older (1.2).",
"Description": "Fexofenadine hydrochloride, the active ingredient of fexofenadine hydrochloride tablets, is a histamine H1-receptor antagonist with the chemical name (±)-4-[1 hydroxy-4-[4-(hydroxydiphenylmethyl)-1-piperidinyl]-butyl]-α, α-dimethyl benzeneacetic acid hydrochloride. It has the following chemical structure. The molecular weight is 538.13 and the empirical formula is C32H39NO4HCl. Fexofenadine hydrochloride is a white to off-white crystalline powder. It is freely soluble in methanol and ethanol, slightly soluble in chloroform and water, and insoluble in hexane. Fexofenadine hydrochloride is a racemate and exists as a zwitterion in aqueous media at physiological pH. Fexofenadine hydrochloride is formulated as a tablet for oral administration. Each tablet contains 30, 60, or 180 mg fexofenadine hydrochloride (depending on the dosage strength) and the following excipients: colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, mannitol, and powder cellulose. The aqueous tablet film coating is made from (Opadry Pink 03B54504) containing FD&C Red no. 40, hypromellose 2910 6cP, iron oxide black, polyethylene glycol 400 and titanium dioxide."
},
{
"NDCCode": "33342-462-06",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (33342-462-06) > 10 CAPSULE in 1 BLISTER PACK (33342-462-66) ",
"NDC11Code": "33342-0462-06",
"ProductNDC": "33342-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cycloserine",
"NonProprietaryName": "Cycloserine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "CYCLOSERINE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190118",
"SamplePackage": "N"
},
{
"NDCCode": "42291-462-30",
"PackageDescription": "3 BLISTER PACK in 1 BOX (42291-462-30) / 10 TABLET in 1 BLISTER PACK (42291-462-11) ",
"NDC11Code": "42291-0462-30",
"ProductNDC": "42291-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Telmisartan And Hydrochlorothiazide",
"NonProprietaryName": "Telmisartan And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202544",
"LabelerName": "AvKARE",
"SubstanceName": "TELMISARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "40; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240618",
"SamplePackage": "N",
"IndicationAndUsage": "Telmisartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the classes to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with telmisartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy [see Clinical Studies (14)]. Telmisartan and hydrochlorothiazide tablets are not indicated for initial therapy for the treatment of hypertension [see Dosage and Administration (2.1)]. Telmisartan and hydrochlorothiazide tablets may be used alone or in combination with other antihypertensive agents.",
"Description": "Telmisartan and Hydrochlorothiazide Tablets, USP are a combination of telmisartan, USP an orally active angiotensin II antagonist acting on the AT 1receptor subtype, and hydrochlorothiazide, USP a thiazide diuretic. Telmisartan, USP a non-peptide molecule, is chemically described as 4’-[[4-methyl- 6-(1-methyl-2-benzimidazolyl)-2-propyl-1-benzimidazolyl] methyl]-2-biphenylcarboxylic acid. Its empirical formula is C 33H 30N 4O 2, its molecular weight is 514.62, and its structural formula is:. Telmisartan, USP is a white or slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride and it dissolves in 1M sodium hydroxide. Hydrochlorothiazide, USP is a white or practically white, practically odorless, crystalline powder with a molecular weight of 297.74. It is very slightly soluble in water, and freely soluble in sodium hydroxide solution, in n-butylamine and in dimethylformamide, sparingly soluble in methanol; insoluble in ether, in chloroform and dilute mineral acids. Hydrochlorothiazide, USP is chemically described as 6-chloro-3,4-dihydro-2 H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C 7H 8ClN 3O 4S 2, and its structural formula is:. Telmisartan and Hydrochlorothiazide Tablets, USP are formulated for oral administration in three combinations of 40 mg/12.5 mg, 80 mg/12.5 mg, and 80 mg/25 mg telmisartan, USP and hydrochlorothiazide, USP respectively. The tablets contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, mannitol, meglumine, povidone K-25, sodium hydroxide, sodium stearyl fumarate and talc. As coloring agents, the 40 mg/12.5 mg, 80 mg/12.5 mg, and 80 mg/25 mg tablets contain ferric oxide red, the 80 mg/25 mg tablets also contain ferric oxide yellow. Telmisartan and Hydrochlorothiazide Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "42571-462-56",
"PackageDescription": "1 BOTTLE in 1 CARTON (42571-462-56) / 10 mL in 1 BOTTLE",
"NDC11Code": "42571-0462-56",
"ProductNDC": "42571-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Brimonidine Tartrate",
"NonProprietaryName": "Brimonidine Tartrate",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20260701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218558",
"LabelerName": "Micro Labs Limited",
"SubstanceName": "BRIMONIDINE TARTRATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260701",
"SamplePackage": "N",
"IndicationAndUsage": "Brimonidine tartrate ophthalmic solution 0.1% is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.",
"Description": "Brimonidine tartrate ophthalmic solution 0.1%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist for topical ophthalmic use. The structural formula of brimonidine tartrate, USP is. 5-Bromo-6-(2-imidazoline-2-ylamino)quinoxaline L-tartrate (1:1); MW= 442.22. In solution, brimonidine tartrate ophthalmic solution, 0.1% has a clear, greenish-yellow color. It has an osmolality between 250 and 350 mOsmol/kg and a pH between 7.4 and 8.0. Brimonidine tartrate, USP appears as a white or slightly yellowish or slightly brownish powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution, 0.1% contains the active ingredient brimonidine tartrate, USP 0.1% (1 mg/mL) with the inactive ingredients sodium carboxymethylcellulose; sodium borate; boric acid; sodium chloride; potassium chloride; calcium chloride; magnesium chloride; stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative; water for injection; and hydrochloric acid and/or sodium hydroxide to adjust pH."
},
{
"NDCCode": "51079-462-56",
"PackageDescription": "10 DOSE PACK in 1 CARTON (51079-462-56) > 30 BLISTER PACK in 1 DOSE PACK (51079-462-30) > 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-462-01) ",
"NDC11Code": "51079-0462-56",
"ProductNDC": "51079-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20081006",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076288",
"LabelerName": "Mylan Institutional Inc.",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20100806",
"EndMarketingDatePackage": "20180731",
"SamplePackage": "N"
},
{
"NDCCode": "52685-462-10",
"PackageDescription": "1 BOTTLE in 1 CARTON (52685-462-10) > 126.5 g in 1 BOTTLE",
"NDC11Code": "52685-0462-10",
"ProductNDC": "52685-462",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cle De Peau Beaute Gentle Protective I",
"NonProprietaryName": "Avobenzone, Octinoxate, Octocrylene, And Oxybenzone",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121001",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "SHISEIDO CO., LTD.",
"SubstanceName": "AVOBENZONE; OCTINOXATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "3163; 9361; 2530; 1265",
"StrengthUnit": "mg/126.5g; mg/126.5g; mg/126.5g; mg/126.5g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "53746-462-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (53746-462-10) ",
"NDC11Code": "53746-0462-10",
"ProductNDC": "53746-462",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ibuprofen",
"NonProprietaryName": "Ibuprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079233",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "IBUPROFEN",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130430",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to:headachemuscular achesminor pain of arthritistoothachebackachethe common coldmenstrual cramps. temporarily reduces fever."
},
{
"NDCCode": "58411-462-20",
"PackageDescription": "1 CARTRIDGE in 1 CARTON (58411-462-20) / 10 g in 1 CARTRIDGE",
"NDC11Code": "58411-0462-20",
"ProductNDC": "58411-462",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Shiseido The Makeup Foundation",
"ProprietaryNameSuffix": "B40",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "SHISEIDO AMERICAS CORPORATION",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "400",
"StrengthUnit": "mg/10g",
"Status": "Active",
"LastUpdate": "2026-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn."
},
{
"NDCCode": "63323-462-17",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-462-17) / 10 mL in 1 VIAL, SINGLE-DOSE (63323-462-04) ",
"NDC11Code": "63323-0462-17",
"ProductNDC": "63323-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sensorcaine",
"ProprietaryNameSuffix": "Mpf",
"NonProprietaryName": "Bupivacaine Hydrochloride And Epinephrine Bitartrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20101119",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018304",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE",
"StrengthNumber": "5; .005",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20101119",
"SamplePackage": "N",
"IndicationAndUsage": "Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.",
"Description": "Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2- piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pK a of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage."
},
{
"NDCCode": "63868-462-10",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (63868-462-10) > 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "63868-0462-10",
"ProductNDC": "63868-462",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190228",
"EndMarketingDate": "20250228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075209",
"LabelerName": "QUALITY CHOICE (Chain Drug Marketing Association)",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-02-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190228",
"EndMarketingDatePackage": "20250228",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes , 4 itching of the nose or throat."
},
{
"NDCCode": "65219-462-10",
"PackageDescription": "10 BAG in 1 CASE (65219-462-10) / 1000 mL in 1 BAG (65219-462-05) ",
"NDC11Code": "65219-0462-10",
"ProductNDC": "65219-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20240709",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207449",
"LabelerName": "FRESENIUS KABI USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2024-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240709",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.",
"Description": "5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "66949-462-10",
"PackageDescription": "11400 mL in 1 CASE (66949-462-10) ",
"NDC11Code": "66949-0462-10",
"ProductNDC": "66949-462",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Zep Hand Sanitizer",
"NonProprietaryName": "Ethanol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200323",
"EndMarketingDate": "20201231",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Zep Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "62",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200323",
"EndMarketingDatePackage": "20201231",
"SamplePackage": "N"
},
{
"NDCCode": "67253-462-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (67253-462-10)",
"NDC11Code": "67253-0462-10",
"ProductNDC": "67253-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glyburide",
"NonProprietaryName": "Glyburide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19971222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074591",
"LabelerName": "Par Pharmaceutical",
"SubstanceName": "GLYBURIDE",
"StrengthNumber": "6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea [EPC],Sulfonylurea Compounds [CS]",
"Status": "Deprecated",
"LastUpdate": "2018-02-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "67877-462-33",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (67877-462-33) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "67877-0462-33",
"ProductNDC": "67877-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20191002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207799",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191002",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) contain red iron oxide, yellow iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol and shellac."
},
{
"NDCCode": "67877-462-38",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (67877-462-38) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "67877-0462-38",
"ProductNDC": "67877-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20191002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207799",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191002",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) contain red iron oxide, yellow iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol and shellac."
},
{
"NDCCode": "68001-462-42",
"PackageDescription": "10 SYRINGE in 1 CARTON (68001-462-42) / .8 mL in 1 SYRINGE (68001-462-43) ",
"NDC11Code": "68001-0462-42",
"ProductNDC": "68001-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20201019",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076684",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-10-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201019",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness ( 1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism ( 1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism ( 1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) ( 1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) ( 1.4) .",
"Description": "Enoxaparin Sodium Injection USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:."
},
{
"NDCCode": "68083-462-10",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (68083-462-10) / 6 mL in 1 VIAL, SINGLE-DOSE (68083-462-01) ",
"NDC11Code": "68083-0462-10",
"ProductNDC": "68083-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arsenic Trioxide",
"NonProprietaryName": "Arsenic Trioxide",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20211007",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215059",
"LabelerName": "Gland Pharma Limited",
"SubstanceName": "ARSENIC TRIOXIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2024-09-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211007",
"SamplePackage": "N",
"IndicationAndUsage": "Arsenic trioxide injection is an arsenical indicated: 1 For induction of remission and consolidation in patients with APL who are refractory to, or have relapsed from, retinoid and anthracycline chemotherapy, and whose APL is characterized by the presence of the t(15;17) translocation or PML/RAR-alpha gene expression. (1.2).",
"Description": "Arsenic trioxide injection is a sterile injectable solution of arsenic trioxide. The molecular formula of arsenic trioxide in the solid state is As2O3, with a molecular weight of 197.8 and the following structural formula. Arsenic trioxide injection is available in 10 mL, single-dose vials containing 10 mg or 12 mg of arsenic trioxide. Arsenic trioxide injection is formulated as a sterile, nonpyrogenic, clear solution of arsenic trioxide in water for injection using sodium hydroxide and dilute hydrochloric acid to adjust to pH 8. Arsenic trioxide injection is preservative-free. Arsenic trioxide, the active ingredient, is present at a concentration of 1 mg/mL and 2 mg/mL. Inactive ingredients and their respective approximate concentrations are sodium hydroxide (1.2 mg/mL) for solubilization, and sodium hydroxide and hydrochloric acid for pH adjustment to pH 8."
},
{
"NDCCode": "71919-462-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (71919-462-10) ",
"NDC11Code": "71919-0462-10",
"ProductNDC": "71919-462",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mercurius Sulphuratus Ruber",
"NonProprietaryName": "Mercuric Sulfide",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "MERCURIC SULFIDE",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N"
},
{
"NDCCode": "72572-462-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (72572-462-10) / 10 mL in 1 VIAL, MULTI-DOSE (72572-462-01) ",
"NDC11Code": "72572-0462-10",
"ProductNDC": "72572-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neostigmine Methylsulfate",
"NonProprietaryName": "Neostigmine Methylsulfate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207042",
"LabelerName": "Civica, Inc.",
"SubstanceName": "NEOSTIGMINE METHYLSULFATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200416",
"SamplePackage": "N",
"IndicationAndUsage": "Neostigmine Methylsulfate Injection, USP is a cholinesterase inhibitor indicated for the reversal of the effects of non-depolarizing neuromuscular blocking agents after surgery.",
"Description": "Neostigmine methylsulfate, a cholinesterase inhibitor, is (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. The structural formula is. Neostigmine methylsulfate is a white crystalline powder and is very soluble in water and soluble in alcohol. Neostigmine Methylsulfate Injection, USP is a sterile, nonpyrogenic solution intended for intravenous use. Each mL of the 0.5 mg/mL strength contains neostigmine methylsulfate 0.5 mg, phenol 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 1 mg/mL strength contains neostigmine methylsulfate 1 mg, phenol 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5."
},
{
"NDCCode": "99207-462-10",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (99207-462-10)",
"NDC11Code": "99207-0462-10",
"ProductNDC": "99207-462",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Solodyn",
"NonProprietaryName": "Minocycline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20060508",
"EndMarketingDate": "20140228",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050808",
"LabelerName": "Medicis Pharmaceutical Corp.",
"SubstanceName": "MINOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "135",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2014-03-05"
},
{
"NDCCode": "54575-081-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-081-10)",
"NDC11Code": "54575-0081-10",
"ProductNDC": "54575-081",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bahia Grass Pollen",
"NonProprietaryName": "Paspalum Notatum Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "PASPALUM NOTATUM POLLEN",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "54575-082-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-082-10)",
"NDC11Code": "54575-0082-10",
"ProductNDC": "54575-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Barley Pollen",
"NonProprietaryName": "Hordeum Vulgare Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "HORDEUM VULGARE POLLEN",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "54575-083-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-083-10)",
"NDC11Code": "54575-0083-10",
"ProductNDC": "54575-083",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Creeping Bent Grass Pollen",
"NonProprietaryName": "Agrostis Stolonifera Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "AGROSTIS STOLONIFERA POLLEN",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "54575-084-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-084-10)",
"NDC11Code": "54575-0084-10",
"ProductNDC": "54575-084",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Bermuda Grass Pollen",
"NonProprietaryName": "Cynodon Dactylon Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19970529",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101379",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "CYNODON DACTYLON POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Standardized grass pollen extracts are used for the diagnosis and treatment of allergic disease to grass pollen. The standardized (Bioequivalent Allergy Unit) extract in these vials is designed primarily for the physician equipped to prepare dilutions and mixtures as required. STANDARDIZED GRASS POLLEN EXTRACTS LABELED IN BAU/ml ARE NOT INTERCHANGEABLE WITH GRASS POLLEN EXTRACTS LABELED IN AU/ml OR WITH NON-STANDARDIZED (WEIGHT/VOLUME) GRASS POLLEN EXTRACTS. Patients being switched from other types of extracts to Allergy Laboratories should have their dose adjusted. Diagnosis of allergic disease to these grasses is made through a combined medical history sufficiently complete to identify allergic symptoms to grass pollen and identification of grass allergy by diagnostic skin testing. It is recommended that diagnostic skin testing (scratch or puncture) be performed with 10,000 BAU/ml grass pollen extracts before testing with 100,000 BAU/ml grass pollen extracts. 10,000 BAU/mL and 100,000 BAU/ml grass pollen extracts for immunotherapy are available for previously treated patients to facilitate dose selection for safe switching from non-standardized to standardized extracts. Patients being treated with grass pollen extracts for the first time can be initially immunized with dilutions prepared from the 10,000 BAU/ml extract (see Dosage and Administration). 100,000 BAU/ml grass pollen extract can be administered if the patient tolerates the 10,000 BAU/ml extract. Grass pollen immunotherapy is intended for patients whose grass allergic symptoms cannot be satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. (5).",
"Description": "Standardized grass pollen extracts labeled in BAU/ml are not interchangeable with grass pollen extracts labeled in AU/ml or with non-standardized grass pollen extracts. The recommended route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Do not inject intravenously. The extract is sterile and contains 50% (v/v) glycerin as a preservative. Standardized grass pollen extracts are available in both 10,000 BAU/ml and 100,000 BAU/ml potencies, except for Bermuda which is only available in 10,000 BAU/ml. The source material of the standardized grass extracts are the grass pollens. The 100,000 BAU/ml grass pollen extracts are prepared by extracting pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 100,000 BAU/ml. The 10,000 BAU/ml grass pollen extracts are prepared by dilution of the 100,000 BAU/ml grass pollen extracts. The 10,000 BAU/ml Bermuda grass pollen extract is prepared by extracting Bermuda grass pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 10,000 BAU/ml. The potency (in Bioequivalent Allergy Units per ml or BAU/ml) of standardized grass pollen extracts is determined by an in-vitro ELISA Competition assay (1) against CBER reference extracts and CBER reference serum pools distributed by the Center for Biologics Evaluation and Research, U S Food and Drug Administration. Potency based on Bioequivalent Allergy Units (BAU/ml) is printed on the label. FDA reference grass pollen extracts were assigned potency designations based on quantitative skin testing (2). The FDA reference extracts which can be diluted 1:500,000 fold intradermally to produce a sum of erythema diameter response of 50mm in highly puncture reactive subjects have been assigned 10,000 BAU/ml. References which can be diluted 1:5,000,000 fold intraderrnally to produce a sum of erythema diameter response of 50mm have been assigned 100,000 BAU/ml."
},
{
"NDCCode": "54575-085-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-085-10)",
"NDC11Code": "54575-0085-10",
"ProductNDC": "54575-085",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Annual Bluegrass Pollen",
"NonProprietaryName": "Poa Annua Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "POA ANNUA POLLEN",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "54575-087-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-087-10)",
"NDC11Code": "54575-0087-10",
"ProductNDC": "54575-087",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Kentucky Bluegrass Pollen",
"NonProprietaryName": "Poa Pratensis Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19970529",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101380",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "POA PRATENSIS POLLEN",
"StrengthNumber": "100000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Standardized grass pollen extracts are used for the diagnosis and treatment of allergic disease to grass pollen. The standardized (Bioequivalent Allergy Unit) extract in these vials is designed primarily for the physician equipped to prepare dilutions and mixtures as required. STANDARDIZED GRASS POLLEN EXTRACTS LABELED IN BAU/ml ARE NOT INTERCHANGEABLE WITH GRASS POLLEN EXTRACTS LABELED IN AU/ml OR WITH NON-STANDARDIZED (WEIGHT/VOLUME) GRASS POLLEN EXTRACTS. Patients being switched from other types of extracts to Allergy Laboratories should have their dose adjusted. Diagnosis of allergic disease to these grasses is made through a combined medical history sufficiently complete to identify allergic symptoms to grass pollen and identification of grass allergy by diagnostic skin testing. It is recommended that diagnostic skin testing (scratch or puncture) be performed with 10,000 BAU/ml grass pollen extracts before testing with 100,000 BAU/ml grass pollen extracts. 10,000 BAU/mL and 100,000 BAU/ml grass pollen extracts for immunotherapy are available for previously treated patients to facilitate dose selection for safe switching from non-standardized to standardized extracts. Patients being treated with grass pollen extracts for the first time can be initially immunized with dilutions prepared from the 10,000 BAU/ml extract (see Dosage and Administration). 100,000 BAU/ml grass pollen extract can be administered if the patient tolerates the 10,000 BAU/ml extract. Grass pollen immunotherapy is intended for patients whose grass allergic symptoms cannot be satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. (5).",
"Description": "Standardized grass pollen extracts labeled in BAU/ml are not interchangeable with grass pollen extracts labeled in AU/ml or with non-standardized grass pollen extracts. The recommended route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Do not inject intravenously. The extract is sterile and contains 50% (v/v) glycerin as a preservative. Standardized grass pollen extracts are available in both 10,000 BAU/ml and 100,000 BAU/ml potencies, except for Bermuda which is only available in 10,000 BAU/ml. The source material of the standardized grass extracts are the grass pollens. The 100,000 BAU/ml grass pollen extracts are prepared by extracting pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 100,000 BAU/ml. The 10,000 BAU/ml grass pollen extracts are prepared by dilution of the 100,000 BAU/ml grass pollen extracts. The 10,000 BAU/ml Bermuda grass pollen extract is prepared by extracting Bermuda grass pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 10,000 BAU/ml. The potency (in Bioequivalent Allergy Units per ml or BAU/ml) of standardized grass pollen extracts is determined by an in-vitro ELISA Competition assay (1) against CBER reference extracts and CBER reference serum pools distributed by the Center for Biologics Evaluation and Research, U S Food and Drug Administration. Potency based on Bioequivalent Allergy Units (BAU/ml) is printed on the label. FDA reference grass pollen extracts were assigned potency designations based on quantitative skin testing (2). The FDA reference extracts which can be diluted 1:500,000 fold intradermally to produce a sum of erythema diameter response of 50mm in highly puncture reactive subjects have been assigned 10,000 BAU/ml. References which can be diluted 1:5,000,000 fold intraderrnally to produce a sum of erythema diameter response of 50mm have been assigned 100,000 BAU/ml."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>54575-462-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-462-10)</PackageDescription>
<NDC11Code>54575-0462-10</NDC11Code>
<ProductNDC>54575-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Strawberry</ProprietaryName>
<NonProprietaryName>Strawberry</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>STRAWBERRY</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>54575-462-02</NDCCode>
<PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (54575-462-02)</PackageDescription>
<NDC11Code>54575-0462-02</NDC11Code>
<ProductNDC>54575-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Strawberry</ProprietaryName>
<NonProprietaryName>Strawberry</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>STRAWBERRY</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>54575-462-30</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (54575-462-30)</PackageDescription>
<NDC11Code>54575-0462-30</NDC11Code>
<ProductNDC>54575-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Strawberry</ProprietaryName>
<NonProprietaryName>Strawberry</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>STRAWBERRY</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>54575-462-50</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (54575-462-50)</PackageDescription>
<NDC11Code>54575-0462-50</NDC11Code>
<ProductNDC>54575-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Strawberry</ProprietaryName>
<NonProprietaryName>Strawberry</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>STRAWBERRY</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Fruit Proteins [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>21695-462-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (21695-462-10)</PackageDescription>
<NDC11Code>21695-0462-10</NDC11Code>
<ProductNDC>21695-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fexofenadine Hydrochloride</ProprietaryName>
<NonProprietaryName>Fexofenadine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076502</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>FEXOFENADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>180</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Fexofenadine hydrochloride is an H1-receptor antagonist indicated for. Relief of symptoms associated with seasonal allergic rhinitis in patients 6 years of age and older (1.1). Treatment of uncomplicated skin manifestations of chronic idiopathic urticaria in patients 6 years of age and older (1.2).</IndicationAndUsage>
<Description>Fexofenadine hydrochloride, the active ingredient of fexofenadine hydrochloride tablets, is a histamine H1-receptor antagonist with the chemical name (±)-4-[1 hydroxy-4-[4-(hydroxydiphenylmethyl)-1-piperidinyl]-butyl]-α, α-dimethyl benzeneacetic acid hydrochloride. It has the following chemical structure. The molecular weight is 538.13 and the empirical formula is C32H39NO4HCl. Fexofenadine hydrochloride is a white to off-white crystalline powder. It is freely soluble in methanol and ethanol, slightly soluble in chloroform and water, and insoluble in hexane. Fexofenadine hydrochloride is a racemate and exists as a zwitterion in aqueous media at physiological pH. Fexofenadine hydrochloride is formulated as a tablet for oral administration. Each tablet contains 30, 60, or 180 mg fexofenadine hydrochloride (depending on the dosage strength) and the following excipients: colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, mannitol, and powder cellulose. The aqueous tablet film coating is made from (Opadry Pink 03B54504) containing FD&C Red no. 40, hypromellose 2910 6cP, iron oxide black, polyethylene glycol 400 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>33342-462-06</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (33342-462-06) > 10 CAPSULE in 1 BLISTER PACK (33342-462-66) </PackageDescription>
<NDC11Code>33342-0462-06</NDC11Code>
<ProductNDC>33342-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cycloserine</ProprietaryName>
<NonProprietaryName>Cycloserine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>CYCLOSERINE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42291-462-30</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 BOX (42291-462-30) / 10 TABLET in 1 BLISTER PACK (42291-462-11) </PackageDescription>
<NDC11Code>42291-0462-30</NDC11Code>
<ProductNDC>42291-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Telmisartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Telmisartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202544</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>TELMISARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>40; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240618</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Telmisartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the classes to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with telmisartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy [see Clinical Studies (14)]. Telmisartan and hydrochlorothiazide tablets are not indicated for initial therapy for the treatment of hypertension [see Dosage and Administration (2.1)]. Telmisartan and hydrochlorothiazide tablets may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Telmisartan and Hydrochlorothiazide Tablets, USP are a combination of telmisartan, USP an orally active angiotensin II antagonist acting on the AT 1receptor subtype, and hydrochlorothiazide, USP a thiazide diuretic. Telmisartan, USP a non-peptide molecule, is chemically described as 4’-[[4-methyl- 6-(1-methyl-2-benzimidazolyl)-2-propyl-1-benzimidazolyl] methyl]-2-biphenylcarboxylic acid. Its empirical formula is C 33H 30N 4O 2, its molecular weight is 514.62, and its structural formula is:. Telmisartan, USP is a white or slightly yellowish crystalline powder. It is practically insoluble in water, slightly soluble in methanol, sparingly soluble in methylene chloride and it dissolves in 1M sodium hydroxide. Hydrochlorothiazide, USP is a white or practically white, practically odorless, crystalline powder with a molecular weight of 297.74. It is very slightly soluble in water, and freely soluble in sodium hydroxide solution, in n-butylamine and in dimethylformamide, sparingly soluble in methanol; insoluble in ether, in chloroform and dilute mineral acids. Hydrochlorothiazide, USP is chemically described as 6-chloro-3,4-dihydro-2 H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C 7H 8ClN 3O 4S 2, and its structural formula is:. Telmisartan and Hydrochlorothiazide Tablets, USP are formulated for oral administration in three combinations of 40 mg/12.5 mg, 80 mg/12.5 mg, and 80 mg/25 mg telmisartan, USP and hydrochlorothiazide, USP respectively. The tablets contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, lactose monohydrate, magnesium stearate, mannitol, meglumine, povidone K-25, sodium hydroxide, sodium stearyl fumarate and talc. As coloring agents, the 40 mg/12.5 mg, 80 mg/12.5 mg, and 80 mg/25 mg tablets contain ferric oxide red, the 80 mg/25 mg tablets also contain ferric oxide yellow. Telmisartan and Hydrochlorothiazide Tablets, USP are hygroscopic and require protection from moisture. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>42571-462-56</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (42571-462-56) / 10 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>42571-0462-56</NDC11Code>
<ProductNDC>42571-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Brimonidine Tartrate</ProprietaryName>
<NonProprietaryName>Brimonidine Tartrate</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20260701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218558</ApplicationNumber>
<LabelerName>Micro Labs Limited</LabelerName>
<SubstanceName>BRIMONIDINE TARTRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Brimonidine tartrate ophthalmic solution 0.1% is indicated for the reduction of elevated intraocular pressure (IOP) in patients with open-angle glaucoma or ocular hypertension.</IndicationAndUsage>
<Description>Brimonidine tartrate ophthalmic solution 0.1%, sterile, is a relatively selective alpha-2 adrenergic receptor agonist for topical ophthalmic use. The structural formula of brimonidine tartrate, USP is. 5-Bromo-6-(2-imidazoline-2-ylamino)quinoxaline L-tartrate (1:1); MW= 442.22. In solution, brimonidine tartrate ophthalmic solution, 0.1% has a clear, greenish-yellow color. It has an osmolality between 250 and 350 mOsmol/kg and a pH between 7.4 and 8.0. Brimonidine tartrate, USP appears as a white or slightly yellowish or slightly brownish powder and is soluble in both water (0.6 mg/mL) and in the product vehicle (1.4 mg/mL) at pH 7.7. Each mL of brimonidine tartrate ophthalmic solution, 0.1% contains the active ingredient brimonidine tartrate, USP 0.1% (1 mg/mL) with the inactive ingredients sodium carboxymethylcellulose; sodium borate; boric acid; sodium chloride; potassium chloride; calcium chloride; magnesium chloride; stabilized oxychloro complex 0.005% (0.05 mg/mL) as a preservative; water for injection; and hydrochloric acid and/or sodium hydroxide to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>51079-462-56</NDCCode>
<PackageDescription>10 DOSE PACK in 1 CARTON (51079-462-56) > 30 BLISTER PACK in 1 DOSE PACK (51079-462-30) > 1 TABLET, FILM COATED in 1 BLISTER PACK (51079-462-01) </PackageDescription>
<NDC11Code>51079-0462-56</NDC11Code>
<ProductNDC>51079-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081006</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076288</ApplicationNumber>
<LabelerName>Mylan Institutional Inc.</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100806</StartMarketingDatePackage>
<EndMarketingDatePackage>20180731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>52685-462-10</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (52685-462-10) > 126.5 g in 1 BOTTLE</PackageDescription>
<NDC11Code>52685-0462-10</NDC11Code>
<ProductNDC>52685-462</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cle De Peau Beaute Gentle Protective I</ProprietaryName>
<NonProprietaryName>Avobenzone, Octinoxate, Octocrylene, And Oxybenzone</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>SHISEIDO CO., LTD.</LabelerName>
<SubstanceName>AVOBENZONE; OCTINOXATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>3163; 9361; 2530; 1265</StrengthNumber>
<StrengthUnit>mg/126.5g; mg/126.5g; mg/126.5g; mg/126.5g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>53746-462-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (53746-462-10) </PackageDescription>
<NDC11Code>53746-0462-10</NDC11Code>
<ProductNDC>53746-462</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ibuprofen</ProprietaryName>
<NonProprietaryName>Ibuprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130430</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079233</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>IBUPROFEN</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to:headachemuscular achesminor pain of arthritistoothachebackachethe common coldmenstrual cramps. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>58411-462-20</NDCCode>
<PackageDescription>1 CARTRIDGE in 1 CARTON (58411-462-20) / 10 g in 1 CARTRIDGE</PackageDescription>
<NDC11Code>58411-0462-20</NDC11Code>
<ProductNDC>58411-462</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Shiseido The Makeup Foundation</ProprietaryName>
<ProprietaryNameSuffix>B40</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>SHISEIDO AMERICAS CORPORATION</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/10g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63323-462-17</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-462-17) / 10 mL in 1 VIAL, SINGLE-DOSE (63323-462-04) </PackageDescription>
<NDC11Code>63323-0462-17</NDC11Code>
<ProductNDC>63323-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sensorcaine</ProprietaryName>
<ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
<NonProprietaryName>Bupivacaine Hydrochloride And Epinephrine Bitartrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20101119</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018304</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
<StrengthNumber>5; .005</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.</IndicationAndUsage>
<Description>Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2- piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pK a of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage.</Description>
</NDC>
<NDC>
<NDCCode>63868-462-10</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (63868-462-10) > 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63868-0462-10</NDC11Code>
<ProductNDC>63868-462</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190228</StartMarketingDate>
<EndMarketingDate>20250228</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075209</ApplicationNumber>
<LabelerName>QUALITY CHOICE (Chain Drug Marketing Association)</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-02-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190228</StartMarketingDatePackage>
<EndMarketingDatePackage>20250228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes , 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65219-462-10</NDCCode>
<PackageDescription>10 BAG in 1 CASE (65219-462-10) / 1000 mL in 1 BAG (65219-462-05) </PackageDescription>
<NDC11Code>65219-0462-10</NDC11Code>
<ProductNDC>65219-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20240709</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207449</ApplicationNumber>
<LabelerName>FRESENIUS KABI USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240709</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing dextrose are indicated for parenteral replenishment of fluid and minimal carbohydrate calories as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>5% Dextrose Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing dextrose in water for injection intended for intravenous administration. Each 100 mL of 5% Dextrose Injection, USP, contains dextrose monohydrate, 5 g in water for injection. The caloric value is 170 kcal/L. The osmolarity is 252 mOsmol/L (calc.), which is slightly hypotonic. The solution pH is 4.3 (3.2 to 6.5). This solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 5% Dextrose Injection, USP is a parenteral fluid and nutrient replenisher. Dextrose, USP is chemically designated D-glucose monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>66949-462-10</NDCCode>
<PackageDescription>11400 mL in 1 CASE (66949-462-10) </PackageDescription>
<NDC11Code>66949-0462-10</NDC11Code>
<ProductNDC>66949-462</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Zep Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Ethanol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200323</StartMarketingDate>
<EndMarketingDate>20201231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Zep Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>62</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200323</StartMarketingDatePackage>
<EndMarketingDatePackage>20201231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67253-462-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (67253-462-10)</PackageDescription>
<NDC11Code>67253-0462-10</NDC11Code>
<ProductNDC>67253-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glyburide</ProprietaryName>
<NonProprietaryName>Glyburide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19971222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074591</ApplicationNumber>
<LabelerName>Par Pharmaceutical</LabelerName>
<SubstanceName>GLYBURIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea [EPC],Sulfonylurea Compounds [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>67877-462-33</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (67877-462-33) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>67877-0462-33</NDC11Code>
<ProductNDC>67877-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207799</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191002</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) contain red iron oxide, yellow iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>67877-462-38</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (67877-462-38) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>67877-0462-38</NDC11Code>
<ProductNDC>67877-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207799</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191002</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin is indicated for: Management of neuropathic pain associated with diabetic peripheral neuropathy Management of postherpetic neuralgia Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) contain red iron oxide, yellow iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>68001-462-42</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (68001-462-42) / .8 mL in 1 SYRINGE (68001-462-43) </PackageDescription>
<NDC11Code>68001-0462-42</NDC11Code>
<ProductNDC>68001-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20201019</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076684</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-10-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201019</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin Sodium Injection is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness ( 1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism ( 1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism ( 1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction (MI) ( 1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) ( 1.4) .</IndicationAndUsage>
<Description>Enoxaparin Sodium Injection USP is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:.</Description>
</NDC>
<NDC>
<NDCCode>68083-462-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (68083-462-10) / 6 mL in 1 VIAL, SINGLE-DOSE (68083-462-01) </PackageDescription>
<NDC11Code>68083-0462-10</NDC11Code>
<ProductNDC>68083-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arsenic Trioxide</ProprietaryName>
<NonProprietaryName>Arsenic Trioxide</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20211007</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215059</ApplicationNumber>
<LabelerName>Gland Pharma Limited</LabelerName>
<SubstanceName>ARSENIC TRIOXIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-09-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Arsenic trioxide injection is an arsenical indicated: 1 For induction of remission and consolidation in patients with APL who are refractory to, or have relapsed from, retinoid and anthracycline chemotherapy, and whose APL is characterized by the presence of the t(15;17) translocation or PML/RAR-alpha gene expression. (1.2).</IndicationAndUsage>
<Description>Arsenic trioxide injection is a sterile injectable solution of arsenic trioxide. The molecular formula of arsenic trioxide in the solid state is As2O3, with a molecular weight of 197.8 and the following structural formula. Arsenic trioxide injection is available in 10 mL, single-dose vials containing 10 mg or 12 mg of arsenic trioxide. Arsenic trioxide injection is formulated as a sterile, nonpyrogenic, clear solution of arsenic trioxide in water for injection using sodium hydroxide and dilute hydrochloric acid to adjust to pH 8. Arsenic trioxide injection is preservative-free. Arsenic trioxide, the active ingredient, is present at a concentration of 1 mg/mL and 2 mg/mL. Inactive ingredients and their respective approximate concentrations are sodium hydroxide (1.2 mg/mL) for solubilization, and sodium hydroxide and hydrochloric acid for pH adjustment to pH 8.</Description>
</NDC>
<NDC>
<NDCCode>71919-462-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-462-10) </PackageDescription>
<NDC11Code>71919-0462-10</NDC11Code>
<ProductNDC>71919-462</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mercurius Sulphuratus Ruber</ProprietaryName>
<NonProprietaryName>Mercuric Sulfide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>MERCURIC SULFIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>72572-462-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (72572-462-10) / 10 mL in 1 VIAL, MULTI-DOSE (72572-462-01) </PackageDescription>
<NDC11Code>72572-0462-10</NDC11Code>
<ProductNDC>72572-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neostigmine Methylsulfate</ProprietaryName>
<NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207042</ApplicationNumber>
<LabelerName>Civica, Inc.</LabelerName>
<SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Neostigmine Methylsulfate Injection, USP is a cholinesterase inhibitor indicated for the reversal of the effects of non-depolarizing neuromuscular blocking agents after surgery.</IndicationAndUsage>
<Description>Neostigmine methylsulfate, a cholinesterase inhibitor, is (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. The structural formula is. Neostigmine methylsulfate is a white crystalline powder and is very soluble in water and soluble in alcohol. Neostigmine Methylsulfate Injection, USP is a sterile, nonpyrogenic solution intended for intravenous use. Each mL of the 0.5 mg/mL strength contains neostigmine methylsulfate 0.5 mg, phenol 4.5 mg (used as preservative) and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5. Each mL of the 1 mg/mL strength contains neostigmine methylsulfate 1 mg, phenol 4.5 mg (used as preservative), and sodium acetate trihydrate 0.2 mg, in water for injection. The pH is adjusted, when necessary, with acetic acid/sodium hydroxide to achieve a value of 5.5.</Description>
</NDC>
<NDC>
<NDCCode>99207-462-10</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (99207-462-10)</PackageDescription>
<NDC11Code>99207-0462-10</NDC11Code>
<ProductNDC>99207-462</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Solodyn</ProprietaryName>
<NonProprietaryName>Minocycline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060508</StartMarketingDate>
<EndMarketingDate>20140228</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050808</ApplicationNumber>
<LabelerName>Medicis Pharmaceutical Corp.</LabelerName>
<SubstanceName>MINOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>135</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-03-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>54575-081-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-081-10)</PackageDescription>
<NDC11Code>54575-0081-10</NDC11Code>
<ProductNDC>54575-081</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bahia Grass Pollen</ProprietaryName>
<NonProprietaryName>Paspalum Notatum Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>PASPALUM NOTATUM POLLEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>54575-082-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-082-10)</PackageDescription>
<NDC11Code>54575-0082-10</NDC11Code>
<ProductNDC>54575-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Barley Pollen</ProprietaryName>
<NonProprietaryName>Hordeum Vulgare Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>HORDEUM VULGARE POLLEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>54575-083-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-083-10)</PackageDescription>
<NDC11Code>54575-0083-10</NDC11Code>
<ProductNDC>54575-083</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Creeping Bent Grass Pollen</ProprietaryName>
<NonProprietaryName>Agrostis Stolonifera Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>AGROSTIS STOLONIFERA POLLEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>54575-084-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-084-10)</PackageDescription>
<NDC11Code>54575-0084-10</NDC11Code>
<ProductNDC>54575-084</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Bermuda Grass Pollen</ProprietaryName>
<NonProprietaryName>Cynodon Dactylon Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970529</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101379</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized grass pollen extracts are used for the diagnosis and treatment of allergic disease to grass pollen. The standardized (Bioequivalent Allergy Unit) extract in these vials is designed primarily for the physician equipped to prepare dilutions and mixtures as required. STANDARDIZED GRASS POLLEN EXTRACTS LABELED IN BAU/ml ARE NOT INTERCHANGEABLE WITH GRASS POLLEN EXTRACTS LABELED IN AU/ml OR WITH NON-STANDARDIZED (WEIGHT/VOLUME) GRASS POLLEN EXTRACTS. Patients being switched from other types of extracts to Allergy Laboratories should have their dose adjusted. Diagnosis of allergic disease to these grasses is made through a combined medical history sufficiently complete to identify allergic symptoms to grass pollen and identification of grass allergy by diagnostic skin testing. It is recommended that diagnostic skin testing (scratch or puncture) be performed with 10,000 BAU/ml grass pollen extracts before testing with 100,000 BAU/ml grass pollen extracts. 10,000 BAU/mL and 100,000 BAU/ml grass pollen extracts for immunotherapy are available for previously treated patients to facilitate dose selection for safe switching from non-standardized to standardized extracts. Patients being treated with grass pollen extracts for the first time can be initially immunized with dilutions prepared from the 10,000 BAU/ml extract (see Dosage and Administration). 100,000 BAU/ml grass pollen extract can be administered if the patient tolerates the 10,000 BAU/ml extract. Grass pollen immunotherapy is intended for patients whose grass allergic symptoms cannot be satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. (5).</IndicationAndUsage>
<Description>Standardized grass pollen extracts labeled in BAU/ml are not interchangeable with grass pollen extracts labeled in AU/ml or with non-standardized grass pollen extracts. The recommended route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Do not inject intravenously. The extract is sterile and contains 50% (v/v) glycerin as a preservative. Standardized grass pollen extracts are available in both 10,000 BAU/ml and 100,000 BAU/ml potencies, except for Bermuda which is only available in 10,000 BAU/ml. The source material of the standardized grass extracts are the grass pollens. The 100,000 BAU/ml grass pollen extracts are prepared by extracting pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 100,000 BAU/ml. The 10,000 BAU/ml grass pollen extracts are prepared by dilution of the 100,000 BAU/ml grass pollen extracts. The 10,000 BAU/ml Bermuda grass pollen extract is prepared by extracting Bermuda grass pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 10,000 BAU/ml. The potency (in Bioequivalent Allergy Units per ml or BAU/ml) of standardized grass pollen extracts is determined by an in-vitro ELISA Competition assay (1) against CBER reference extracts and CBER reference serum pools distributed by the Center for Biologics Evaluation and Research, U S Food and Drug Administration. Potency based on Bioequivalent Allergy Units (BAU/ml) is printed on the label. FDA reference grass pollen extracts were assigned potency designations based on quantitative skin testing (2). The FDA reference extracts which can be diluted 1:500,000 fold intradermally to produce a sum of erythema diameter response of 50mm in highly puncture reactive subjects have been assigned 10,000 BAU/ml. References which can be diluted 1:5,000,000 fold intraderrnally to produce a sum of erythema diameter response of 50mm have been assigned 100,000 BAU/ml.</Description>
</NDC>
<NDC>
<NDCCode>54575-085-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-085-10)</PackageDescription>
<NDC11Code>54575-0085-10</NDC11Code>
<ProductNDC>54575-085</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Annual Bluegrass Pollen</ProprietaryName>
<NonProprietaryName>Poa Annua Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>POA ANNUA POLLEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>54575-087-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-087-10)</PackageDescription>
<NDC11Code>54575-0087-10</NDC11Code>
<ProductNDC>54575-087</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Kentucky Bluegrass Pollen</ProprietaryName>
<NonProprietaryName>Poa Pratensis Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19970529</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101380</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
<StrengthNumber>100000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized grass pollen extracts are used for the diagnosis and treatment of allergic disease to grass pollen. The standardized (Bioequivalent Allergy Unit) extract in these vials is designed primarily for the physician equipped to prepare dilutions and mixtures as required. STANDARDIZED GRASS POLLEN EXTRACTS LABELED IN BAU/ml ARE NOT INTERCHANGEABLE WITH GRASS POLLEN EXTRACTS LABELED IN AU/ml OR WITH NON-STANDARDIZED (WEIGHT/VOLUME) GRASS POLLEN EXTRACTS. Patients being switched from other types of extracts to Allergy Laboratories should have their dose adjusted. Diagnosis of allergic disease to these grasses is made through a combined medical history sufficiently complete to identify allergic symptoms to grass pollen and identification of grass allergy by diagnostic skin testing. It is recommended that diagnostic skin testing (scratch or puncture) be performed with 10,000 BAU/ml grass pollen extracts before testing with 100,000 BAU/ml grass pollen extracts. 10,000 BAU/mL and 100,000 BAU/ml grass pollen extracts for immunotherapy are available for previously treated patients to facilitate dose selection for safe switching from non-standardized to standardized extracts. Patients being treated with grass pollen extracts for the first time can be initially immunized with dilutions prepared from the 10,000 BAU/ml extract (see Dosage and Administration). 100,000 BAU/ml grass pollen extract can be administered if the patient tolerates the 10,000 BAU/ml extract. Grass pollen immunotherapy is intended for patients whose grass allergic symptoms cannot be satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. (5).</IndicationAndUsage>
<Description>Standardized grass pollen extracts labeled in BAU/ml are not interchangeable with grass pollen extracts labeled in AU/ml or with non-standardized grass pollen extracts. The recommended route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Do not inject intravenously. The extract is sterile and contains 50% (v/v) glycerin as a preservative. Standardized grass pollen extracts are available in both 10,000 BAU/ml and 100,000 BAU/ml potencies, except for Bermuda which is only available in 10,000 BAU/ml. The source material of the standardized grass extracts are the grass pollens. The 100,000 BAU/ml grass pollen extracts are prepared by extracting pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 100,000 BAU/ml. The 10,000 BAU/ml grass pollen extracts are prepared by dilution of the 100,000 BAU/ml grass pollen extracts. The 10,000 BAU/ml Bermuda grass pollen extract is prepared by extracting Bermuda grass pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 10,000 BAU/ml. The potency (in Bioequivalent Allergy Units per ml or BAU/ml) of standardized grass pollen extracts is determined by an in-vitro ELISA Competition assay (1) against CBER reference extracts and CBER reference serum pools distributed by the Center for Biologics Evaluation and Research, U S Food and Drug Administration. Potency based on Bioequivalent Allergy Units (BAU/ml) is printed on the label. FDA reference grass pollen extracts were assigned potency designations based on quantitative skin testing (2). The FDA reference extracts which can be diluted 1:500,000 fold intradermally to produce a sum of erythema diameter response of 50mm in highly puncture reactive subjects have been assigned 10,000 BAU/ml. References which can be diluted 1:5,000,000 fold intraderrnally to produce a sum of erythema diameter response of 50mm have been assigned 100,000 BAU/ml.</Description>
</NDC>
</NDCList>