RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>54575-469-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-469-10)</PackageDescription>
    <NDC11Code>54575-0469-10</NDC11Code>
    <ProductNDC>54575-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Turkey Food</ProprietaryName>
    <NonProprietaryName>Turkey</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>TURKEY</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Poultry Proteins [EXT],Non-Standardized Food Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-469-02</NDCCode>
    <PackageDescription>2 mL in 1 VIAL, MULTI-DOSE (54575-469-02)</PackageDescription>
    <NDC11Code>54575-0469-02</NDC11Code>
    <ProductNDC>54575-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Turkey Food</ProprietaryName>
    <NonProprietaryName>Turkey</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>TURKEY</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Poultry Proteins [EXT],Non-Standardized Food Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-469-30</NDCCode>
    <PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (54575-469-30)</PackageDescription>
    <NDC11Code>54575-0469-30</NDC11Code>
    <ProductNDC>54575-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Turkey Food</ProprietaryName>
    <NonProprietaryName>Turkey</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>TURKEY</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Poultry Proteins [EXT],Non-Standardized Food Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-469-50</NDCCode>
    <PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (54575-469-50)</PackageDescription>
    <NDC11Code>54575-0469-50</NDC11Code>
    <ProductNDC>54575-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Turkey Food</ProprietaryName>
    <NonProprietaryName>Turkey</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19720829</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA102192</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>TURKEY</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Allergens [CS],Dietary Proteins [CS],Poultry Proteins [EXT],Non-Standardized Food Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
  <NDC>
    <NDCCode>25021-469-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (25021-469-10)  / 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>25021-0469-10</NDC11Code>
    <ProductNDC>25021-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levothyroxine Sodium</ProprietaryName>
    <NonProprietaryName>Levothyroxine Sodium Anhydrous</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20240101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208749</ApplicationNumber>
    <LabelerName>Sagent Pharmaceuticals</LabelerName>
    <SubstanceName>LEVOTHYROXINE SODIUM ANHYDROUS</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>ug/5mL</StrengthUnit>
    <Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levothyroxine Sodium for Injection is indicated for the treatment of myxedema coma. Important Limitations of Use: The relative bioavailability between Levothyroxine Sodium for Injection and oral levothyroxine products has not been established. Caution should be used when switching patients from oral levothyroxine products to Levothyroxine Sodium for Injection as accurate dosing conversion has not been studied.</IndicationAndUsage>
    <Description>Levothyroxine Sodium for Injection contains synthetic crystalline levothyroxine (L-thyroxine) sodium salt. Levothyroxine sodium has an empirical formula of C15H10I4NNaO4, a molecular weight of 798.85 g/mol (anhydrous), and the following structural formula:. Levothyroxine Sodium for Injection is a sterile, preservative-free lyophilized powder consisting of the active ingredient, levothyroxine sodium, and the excipients dibasic sodium phosphate heptahydrate; mannitol; and sodium hydroxide, in single-dose amber glass vials. Levothyroxine Sodium for Injection is available at three dosage strengths: 100 mcg per vial, 200 mcg per vial, and 500 mcg per vial.</Description>
  </NDC>
  <NDC>
    <NDCCode>42291-469-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (42291-469-10) </PackageDescription>
    <NDC11Code>42291-0469-10</NDC11Code>
    <ProductNDC>42291-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Furosemide</ProprietaryName>
    <NonProprietaryName>Furosemide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220104</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076796</ApplicationNumber>
    <LabelerName>AvKARE</LabelerName>
    <SubstanceName>FUROSEMIDE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220104</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Furosemide is a diuretic which is an anthranilic acid derivative. Furosemide Tablets for oral administration contain furosemide as the active ingredient and the following inactive ingredients: corn starch NF, lactose monohydrate NF, magnesium stearate NF, pregelatinized starch NF, and talc USP. Chemically, it is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide is available as white-off white tablets for oral administration in dosage strengths of 20, 40 and 80 mg. Furosemide is a white to off-white odorless crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The CAS Registry Number is 54-31-9. The structural formula is as follows. Tested by USP Dissolution Test 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>43602-469-10</NDCCode>
    <PackageDescription>1000 CAPSULE in 1 BOTTLE (43602-469-10) </PackageDescription>
    <NDC11Code>43602-0469-10</NDC11Code>
    <ProductNDC>43602-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gabapentin</ProprietaryName>
    <NonProprietaryName>Gabapentin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210510</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214956</ApplicationNumber>
    <LabelerName>Ascent Pharmaceuticals, Inc</LabelerName>
    <SubstanceName>GABAPENTIN</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210510</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Gabapentin capsules are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
    <Description>The active ingredient in gabapentin capsules is gabapentin, USP which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C9H17NO2 and the molecular weight is 171.24. The structural formula of gabapentin is. Gabapentin, USP is a white to off-white crystalline solid with a pKa1 of 3.7 and a pKa2 of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin capsule contains 100 mg, 300 mg, or 400 mg of gabapentin, USP and the following inactive ingredients: mannitol, pre-gelatinized starch and talc. The 100 mg capsule shell contains titanium dioxide, gelatin and sodium lauryl sulfate. The 300 mg and 400 mg capsule shell contains FD&amp;C Red 40, D&amp;C Yellow 10, titanium dioxide, gelatin and sodium lauryl sulfate. The ink ingredients common for all strengths are shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide and potassium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>47781-469-13</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (47781-469-13)  / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>47781-0469-13</NDC11Code>
    <ProductNDC>47781-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oseltamivir Phosphate</ProprietaryName>
    <NonProprietaryName>Oseltamivir Phosphate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20161212</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202595</ApplicationNumber>
    <LabelerName>Alvogen Inc.</LabelerName>
    <SubstanceName>OSELTAMIVIR PHOSPHATE</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Neuraminidase Inhibitor [EPC], Neuraminidase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20161212</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oseltamivir phosphate capsules are an influenza neuraminidase inhibitor (NAI) indicated for: : 1 Treatment of acute, uncomplicated influenza A and B in patients 2 weeks of age and older who have been symptomatic for no more than 48 hours. (1.1) , 2 Prophylaxis of influenza  A and B  in patients 1 year and older. (1.2).</IndicationAndUsage>
    <Description>Oseltamivir phosphate, USP, an influenza neuraminidase inhibitor (NAI),  is available as capsules containing 30 mg, 45 mg, or 75 mg oseltamivir for oral use. In addition to the active ingredient, each capsule contains croscarmellose sodium, povidone K-30, pregelatinized starch, sodium stearyl fumarate and talc.  The 30 mg shell (yellow / yellow) contains gelatin, iron oxide red, iron oxide yellow, purified water and titanium dioxide.The 45 mg shell (grey /  grey) contains gelatin, iron oxide black, purified water and titanium dioxide.The 75 mg shell (yellow / grey) contains gelatin, iron oxide black (in body), iron oxide red, iron oxide yellow (in cap), purified water and titanium dioxide.Each capsule is printed with blue ink, which includes butyl alcohol, dehydrated alcohol, FD&amp;C Blue No. 2 aluminum lake, isopropyl alcohol, propylene glycol, shellac and strong ammonium solution.Oseltamivir phosphate, USP is a white to off white powder with the chemical name (3R,4R,5S)-4-acetylamino-5-amino-3(1-ethylpropoxy)-1-cyclohexene-1-carboxylic acid, ethyl ester, phosphate (1:1). The chemical formula is C16H28N2O4 (free base). The molecular weight is 312.4 for oseltamivir free base and 410.4 for oseltamivir phosphate salt. The structural formula is as follows.</Description>
  </NDC>
  <NDC>
    <NDCCode>48954-469-00</NDCCode>
    <PackageDescription>1 BAG in 1 DRUM (48954-469-00)  &gt; 10 kg in 1 BAG</PackageDescription>
    <NDC11Code>48954-0469-00</NDC11Code>
    <ProductNDC>48954-469</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Baclofen</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>19860618</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>Fine Chemicals Corporation (PTY) Ltd.</LabelerName>
    <SubstanceName>BACLOFEN</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2022-11-08</LastUpdate>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>18-JUN-86</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>49349-469-10</NDCCode>
    <PackageDescription>6 TABLET in 1 BLISTER PACK (49349-469-10)</PackageDescription>
    <NDC11Code>49349-0469-10</NDC11Code>
    <ProductNDC>49349-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metformin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120827</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077064</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1000</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Biguanide [EPC],Biguanides [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2016-12-02</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>55111-469-78</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (55111-469-78)  / 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (55111-469-79) </PackageDescription>
    <NDC11Code>55111-0469-78</NDC11Code>
    <ProductNDC>55111-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metoprolol Succinate</ProprietaryName>
    <NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120910</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078889</ApplicationNumber>
    <LabelerName>Dr. Reddy's Laboratories Limited</LabelerName>
    <SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120910</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets USP, have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 95 mg and 190 mg of metoprolol succinate equivalent to 100 mg and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)1- (isopropyl amino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white to off white powder with a molecular weight of 652.8. It is freely soluble in water and soluble in methanol. Inactive ingredients: acetyl tributyl citrate, colloidal silicon dioxide, croscarmellose sodium,   ethyl cellulose, hydrogenated vegetable oil, hydroxypropyl cellulose, hypromellose, methylene chloride,   microcrystalline cellulose, polyethylene glycol, sodium stearyl fumarate, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>55289-469-10</NDCCode>
    <PackageDescription>10 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (55289-469-10) </PackageDescription>
    <NDC11Code>55289-0469-10</NDC11Code>
    <ProductNDC>55289-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Indomethacin</ProprietaryName>
    <NonProprietaryName>Indomethacin</NonProprietaryName>
    <DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090306</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA079175</ApplicationNumber>
    <LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>INDOMETHACIN</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120727</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Indomethacin extended-release capsules are indicated for. : 1 Moderate to severe rheumatoid arthritis including acute flares of chronic disease, 2 Moderate to severe ankylosing spondylitis, 3 Moderate to severe osteoarthritis, 4 Acute painful shoulder (bursitis and/or tendinitis).</IndicationAndUsage>
    <Description>Indomethacin extended-release capsules are nonsteroidal anti-inflammatory drugs, available as capsules containing 75 mg of indomethacin, administered for oral use. The chemical name is 1-(4-chlorobenzoyl)-5-methoxy-2-methyl-1H-indole-3-acetic acid. The molecular weight is 357.8. Its molecular formula is C 19H 16CINO 4, and it has the following chemical structure. Indomethacin is a pale yellow to yellow-tan crystalline powder. It is practically insoluble in water and sparingly soluble in alcohol. It has a pKa of 4.5 and is stable in neutral or slightly acidic media and decomposes in strong alkali. The inactive ingredients in Indomethacin Extended-Release Capsules, 75 mg include. corn starch, D&amp;C Yellow # 10, gelatin, mannitol, povidone, sucrose, talc, and titanium dioxide. This product meets USP Drug Release Test 2 Specifications.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-469-10</NDCCode>
    <PackageDescription>10 TABLET in 1 BOTTLE (61919-469-10) </PackageDescription>
    <NDC11Code>61919-0469-10</NDC11Code>
    <ProductNDC>61919-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Meloxicam</ProprietaryName>
    <NonProprietaryName>Meloxicam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077927</ApplicationNumber>
    <LabelerName>Direct Rx</LabelerName>
    <SubstanceName>MELOXICAM</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>65084-469-10</NDCCode>
    <PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (65084-469-10) </PackageDescription>
    <NDC11Code>65084-0469-10</NDC11Code>
    <ProductNDC>65084-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metadate Cd</ProprietaryName>
    <NonProprietaryName>Methylphenidate Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20030722</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021259</ApplicationNumber>
    <LabelerName>McKesson Corporation dba RX Pak</LabelerName>
    <SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Central Nervous System Stimulant [EPC],Central Nervous System Stimulation [PE]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160706</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>65862-469-10</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (65862-469-10)  / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>65862-0469-10</NDC11Code>
    <ProductNDC>65862-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Losartan Potassium And Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Losartan Potassium And Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20101006</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091629</ApplicationNumber>
    <LabelerName>Aurobindo Pharma Limited</LabelerName>
    <SubstanceName>LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE</SubstanceName>
    <StrengthNumber>100; 12.5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101006</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Losartan potassium and hydrochlorothiazide is a combination of losartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide, a diuretic indicated for: 1 Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1), 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2).</IndicationAndUsage>
    <Description>Losartan potassium and hydrochlorothiazide 50 mg/12.5 mg, losartan potassium and hydrochlorothiazide 100 mg/12.5 mg and losartan potassium and hydrochlorothiazide 100 mg/25 mg tablets combine an angiotensin II receptor blocker acting on the AT1 receptor subtype and a diuretic, hydrochlorothiazide. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H­-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol   monopotassium salt. Its molecular formula is C22H22ClKN6O, and its structural formula is. Losartan potassium USP is a white to off-white powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its molecular formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide USP is a white or practically white, practically odorless, crystalline powder with a molecular weight of 297.74, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Losartan potassium and hydrochlorothiazide is available for oral administration in three tablet combinations of losartan and hydrochlorothiazide. Losartan potassium and hydrochlorothiazide tablets USP, 50 mg/12.5 mg contain 50 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan potassium and hydrochlorothiazide tablets USP, 100 mg/12.5 mg contain 100 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP.  Losartan potassium and hydrochlorothiazide tablets USP, 100 mg/25 mg contain 100 mg of losartan potassium USP and 25 mg of hydrochlorothiazide USP. Inactive ingredients are colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinised starch(maize), and titanium dioxide. Losartan potassium and hydrochlorothiazide 50 mg/12.5 mg and losartan potassium and hydrochlorothiazide 100 mg/25 mg also contain D&amp;C yellow No. 10 aluminum lake. Losartan potassium and hydrochlorothiazide tablets USP, 50 mg/12.5 mg contains 4.24 mg (0.108 mEq) of potassium, losartan potassium and hydrochlorothiazide tablets USP, 100 mg/12.5 mg contains 8.48 mg (0.217 mEq) of potassium, and losartan potassium and hydrochlorothiazide tablets USP, 100 mg/25 mg contains 8.48 mg (0.217 mEq) of potassium. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>67457-469-10</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (67457-469-10)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>67457-0469-10</NDC11Code>
    <ProductNDC>67457-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxaliplatin</ProprietaryName>
    <NonProprietaryName>Oxaliplatin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20140825</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091358</ApplicationNumber>
    <LabelerName>Mylan Institutional LLC</LabelerName>
    <SubstanceName>OXALIPLATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140825</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxaliplatin injection, in combination with infusional fluorouracil and leucovorin, is indicated for: 1 adjuvant treatment of stage III colon cancer in patients who have undergone complete resection of the primary tumor., 2 treatment of advanced colorectal cancer.</IndicationAndUsage>
    <Description>Oxaliplatin is a platinum-based drug with the molecular formula C8H14N2O4Pt and the chemical name of cis-[(1R,2R)-1,2-cyclohexanediamine-N,N′] [oxalato(2-)-O,O′] platinum. Oxaliplatin is an organoplatinum complex in which the platinum atom is complexed with 1,2-diaminocyclohexane (DACH) and with an oxalate ligand as a leaving group. The molecular weight is 397.3. Oxaliplatin is slightly soluble in water at 6 mg/mL, very slightly soluble in methanol, and practically insoluble in ethanol. Oxaliplatin injection, USP for intravenous use is supplied in vials containing 50 mg or 100 mg of oxaliplatin as a clear, colorless, sterile, preservative-free, aqueous solution at a concentration of 5 mg/mL. Water for Injection, USP is present as an inactive ingredient.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-469-33</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (67877-469-33)  / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>67877-0469-33</NDC11Code>
    <ProductNDC>67877-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pregabalin</ProprietaryName>
    <NonProprietaryName>Pregabalin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190721</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207799</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>PREGABALIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190721</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pregabalin is indicated for:  Management of neuropathic pain associated with diabetic peripheral neuropathy  Management of postherpetic neuralgia  Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older  Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
    <Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) contain red iron oxide, yellow iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
  </NDC>
  <NDC>
    <NDCCode>67877-469-38</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (67877-469-38)  / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>67877-0469-38</NDC11Code>
    <ProductNDC>67877-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pregabalin</ProprietaryName>
    <NonProprietaryName>Pregabalin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190721</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207799</ApplicationNumber>
    <LabelerName>Ascend Laboratories, LLC</LabelerName>
    <SubstanceName>PREGABALIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <DEASchedule>CV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-08-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190721</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pregabalin is indicated for:  Management of neuropathic pain associated with diabetic peripheral neuropathy  Management of postherpetic neuralgia  Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older  Management of fibromyalgia Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
    <Description>Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin is a white to off-white, crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is – 1.35. Pregabalin Capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with pregelatinized starch, and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the orange capsule shells (75 mg, 100 mg, 200 mg, 225 mg and 300 mg) contain red iron oxide, yellow iron oxide. The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-469-10</NDCCode>
    <PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (68382-469-10) </PackageDescription>
    <NDC11Code>68382-0469-10</NDC11Code>
    <ProductNDC>68382-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Desvenlafaxine</ProprietaryName>
    <NonProprietaryName>Desvenlafaxine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180508</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204020</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>DESVENLAFAXINE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180508</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Desvenlafaxine extended-release tablets, are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of adults with major depressive disorder (MDD) (1).</IndicationAndUsage>
    <Description>Desvenlafaxine extended-release tablet for oral administration contains desvenlafaxine succinate, a structurally novel SNRI for the treatment of MDD. Desvenlafaxine (O-desmethylvenlafaxine) is the major active metabolite of the antidepressant venlafaxine, a medication used to treat major depressive disorder. Desvenlafaxine is designated RS-4-[2-dimethylamino-1-(1-hydroxycyclohexyl)ethyl]phenol and has the molecular formula of C16H25NO2 (free base) and C16H25NO2C4H6O4 (succinate anhydrous). Desvenlafaxine succinate anhydrous has a molecular weight of 381.48. The structural formula is shown below. Desvenlafaxine succinate, USP is a white to off-white crystalline powder that is soluble in water and slightly soluble in tetrahydrofuran. The solubility of desvenlafaxine succinate is pH dependent. Its octanol:aqueous system (at pH 7) partition coefficient is 0.21. Desvenlafaxine is formulated as an extended-release tablet for once-a-day oral administration. Each tablet contains 37.92 mg or 75.84 mg or 151.67 mg of desvenlafaxine succinate equivalent to 25 mg or 50 mg or 100 mg of desvenlafaxine, respectively. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, stearic acid, talc, titanium dioxide and xanthan gum. Additionally, each 25 mg tablet contains iron oxide red and iron oxide yellow and each 100 mg tablet contains FD&amp;C yellow # 6 aluminium lake and FD&amp;C red # 40 aluminium lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>68382-469-77</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 CARTON (68382-469-77)  &gt; 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (68382-469-30) </PackageDescription>
    <NDC11Code>68382-0469-77</NDC11Code>
    <ProductNDC>68382-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Desvenlafaxine</ProprietaryName>
    <NonProprietaryName>Desvenlafaxine</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180508</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204020</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>DESVENLAFAXINE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180508</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Desvenlafaxine extended-release tablets, are a serotonin and norepinephrine reuptake inhibitor (SNRI) indicated for the treatment of adults with major depressive disorder (MDD) (1).</IndicationAndUsage>
    <Description>Desvenlafaxine extended-release tablet for oral administration contains desvenlafaxine succinate, a structurally novel SNRI for the treatment of MDD. Desvenlafaxine (O-desmethylvenlafaxine) is the major active metabolite of the antidepressant venlafaxine, a medication used to treat major depressive disorder. Desvenlafaxine is designated RS-4-[2-dimethylamino-1-(1-hydroxycyclohexyl)ethyl]phenol and has the molecular formula of C16H25NO2 (free base) and C16H25NO2C4H6O4 (succinate anhydrous). Desvenlafaxine succinate anhydrous has a molecular weight of 381.48. The structural formula is shown below. Desvenlafaxine succinate, USP is a white to off-white crystalline powder that is soluble in water and slightly soluble in tetrahydrofuran. The solubility of desvenlafaxine succinate is pH dependent. Its octanol:aqueous system (at pH 7) partition coefficient is 0.21. Desvenlafaxine is formulated as an extended-release tablet for once-a-day oral administration. Each tablet contains 37.92 mg or 75.84 mg or 151.67 mg of desvenlafaxine succinate equivalent to 25 mg or 50 mg or 100 mg of desvenlafaxine, respectively. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, stearic acid, talc, titanium dioxide and xanthan gum. Additionally, each 25 mg tablet contains iron oxide red and iron oxide yellow and each 100 mg tablet contains FD&amp;C yellow # 6 aluminium lake and FD&amp;C red # 40 aluminium lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>68462-469-54</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (68462-469-54)  / 4 mL in 1 VIAL, SINGLE-DOSE (68462-469-40) </PackageDescription>
    <NDC11Code>68462-0469-54</NDC11Code>
    <ProductNDC>68462-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bumetanide</ProprietaryName>
    <NonProprietaryName>Bumetanide</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20230101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216434</ApplicationNumber>
    <LabelerName>GLENMARK PHARMACEUTICALS INC., USA</LabelerName>
    <SubstanceName>BUMETANIDE</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bumetanide Injection is indicated for the treatment of edema associated with congestive heart failure, hepatic and renal disease, including the nephrotic syndrome. Almost equal diuretic response occurs after oral and parenteral administration of bumetanide. Therefore, if impaired gastrointestinal absorption is suspected or oral administration is not practical, bumetanide should be given by the intramuscular or intravenous route. Successful treatment with bumetanide following instances  of allergic reactions  to  furosemide  suggests a lack of cross-sensitivity.</IndicationAndUsage>
    <Description>Bumetanide is a loop diuretic, available as 4 mL vials and 10 mL vials (0.25 mg/mL) for intravenous or intramuscular injection as a sterile solution. Each mL contains bumetanide 0.25 mg, sodium chloride 8.5 mg and ammonium acetate 4 mg as buffers, edetate disodium dihydrate 0.1 mg and benzyl alcohol 10 mg as preservative in Water for Injection. pH adjusted to 6.8 – 7.8 with sodium hydroxide. Chemically, bumetanide is 3-(butylamino)-4-phenoxy-5-sulfamoylbenzoic acid. It is a practically white powder, slightly soluble in water, soluble in alkaline solutions, having the following structural formula:.</Description>
  </NDC>
  <NDC>
    <NDCCode>71919-469-10</NDCCode>
    <PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-469-10) </PackageDescription>
    <NDC11Code>71919-0469-10</NDC11Code>
    <ProductNDC>71919-469</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Moschus</ProprietaryName>
    <NonProprietaryName>Moschus Moschiferus Musk Sac Resin</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110311</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Washington Homeopathic Products</LabelerName>
    <SubstanceName>MOSCHUS MOSCHIFERUS MUSK SAC RESIN</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[hp_C]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-03-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110311</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>54575-081-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-081-10)</PackageDescription>
    <NDC11Code>54575-0081-10</NDC11Code>
    <ProductNDC>54575-081</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bahia Grass Pollen</ProprietaryName>
    <NonProprietaryName>Paspalum Notatum Pollen</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19671207</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101376</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>PASPALUM NOTATUM POLLEN</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-082-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-082-10)</PackageDescription>
    <NDC11Code>54575-0082-10</NDC11Code>
    <ProductNDC>54575-082</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cultivated Barley Pollen</ProprietaryName>
    <NonProprietaryName>Hordeum Vulgare Pollen</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19671207</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101376</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>HORDEUM VULGARE POLLEN</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-083-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-083-10)</PackageDescription>
    <NDC11Code>54575-0083-10</NDC11Code>
    <ProductNDC>54575-083</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Creeping Bent Grass Pollen</ProprietaryName>
    <NonProprietaryName>Agrostis Stolonifera Pollen</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19671207</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101376</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>AGROSTIS STOLONIFERA POLLEN</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-084-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-084-10)</PackageDescription>
    <NDC11Code>54575-0084-10</NDC11Code>
    <ProductNDC>54575-084</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Standardized Bermuda Grass Pollen</ProprietaryName>
    <NonProprietaryName>Cynodon Dactylon Pollen</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19970529</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101379</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>CYNODON DACTYLON POLLEN</SubstanceName>
    <StrengthNumber>10000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Standardized Pollen Allergenic Extract [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Standardized grass pollen extracts are used for the diagnosis and treatment of allergic disease to grass pollen. The standardized (Bioequivalent Allergy Unit) extract in these vials is designed primarily for the physician equipped to prepare dilutions and mixtures as required. STANDARDIZED GRASS POLLEN EXTRACTS LABELED IN BAU/ml ARE NOT INTERCHANGEABLE WITH GRASS POLLEN EXTRACTS LABELED IN AU/ml OR WITH NON-STANDARDIZED (WEIGHT/VOLUME) GRASS POLLEN EXTRACTS. Patients being switched from other types of extracts to Allergy Laboratories should have their dose adjusted. Diagnosis of allergic disease to these grasses is made through a combined medical history sufficiently complete to identify allergic symptoms to grass pollen and identification of grass allergy by diagnostic skin testing. It is recommended that diagnostic skin testing (scratch or puncture) be performed with 10,000 BAU/ml grass pollen extracts before testing with 100,000 BAU/ml grass pollen extracts. 10,000 BAU/mL and 100,000 BAU/ml grass pollen extracts for immunotherapy are available for previously treated patients to facilitate dose selection for safe switching from non-standardized to standardized extracts. Patients being treated with grass pollen extracts for the first time can be initially immunized with dilutions prepared from the 10,000 BAU/ml extract (see Dosage and Administration). 100,000 BAU/ml grass pollen extract can be administered if the patient tolerates the 10,000 BAU/ml extract.       Grass pollen immunotherapy is intended for patients whose grass allergic symptoms cannot be satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. (5).</IndicationAndUsage>
    <Description>Standardized grass pollen extracts labeled in BAU/ml are not interchangeable with grass pollen extracts labeled in AU/ml or with non-standardized grass pollen extracts. The recommended route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Do not inject intravenously. The extract is sterile and contains 50% (v/v) glycerin as a preservative. Standardized grass pollen extracts are available in both 10,000 BAU/ml and 100,000 BAU/ml potencies, except for Bermuda which is only available in 10,000 BAU/ml. The source material of the standardized grass extracts are the grass pollens. The 100,000 BAU/ml grass pollen extracts are prepared by extracting pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 100,000 BAU/ml. The 10,000 BAU/ml grass pollen extracts are prepared by dilution of the 100,000 BAU/ml grass pollen extracts. The 10,000 BAU/ml Bermuda grass pollen extract is prepared by extracting Bermuda grass pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 10,000 BAU/ml.       The potency (in Bioequivalent Allergy Units per ml or BAU/ml) of standardized grass pollen extracts is determined by an in-vitro ELISA Competition assay (1) against CBER reference extracts and CBER reference serum pools distributed by the Center for Biologics Evaluation and Research, U S Food and Drug Administration. Potency based on Bioequivalent Allergy Units (BAU/ml) is printed on the label. FDA reference grass pollen extracts were assigned potency designations based on quantitative skin testing (2). The FDA reference extracts which can be diluted 1:500,000 fold intradermally to produce a sum of erythema diameter response of 50mm in highly puncture reactive subjects have been assigned 10,000 BAU/ml. References which can be diluted 1:5,000,000 fold intraderrnally to produce a sum of erythema diameter response of 50mm have been assigned 100,000 BAU/ml.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-085-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-085-10)</PackageDescription>
    <NDC11Code>54575-0085-10</NDC11Code>
    <ProductNDC>54575-085</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Annual Bluegrass Pollen</ProprietaryName>
    <NonProprietaryName>Poa Annua Pollen</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19671207</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101376</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>POA ANNUA POLLEN</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-087-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-087-10)</PackageDescription>
    <NDC11Code>54575-0087-10</NDC11Code>
    <ProductNDC>54575-087</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Standardized Kentucky Bluegrass Pollen</ProprietaryName>
    <NonProprietaryName>Poa Pratensis Pollen</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19970529</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101380</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>POA PRATENSIS POLLEN</SubstanceName>
    <StrengthNumber>100000</StrengthNumber>
    <StrengthUnit>[BAU]/mL</StrengthUnit>
    <Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Standardized grass pollen extracts are used for the diagnosis and treatment of allergic disease to grass pollen. The standardized (Bioequivalent Allergy Unit) extract in these vials is designed primarily for the physician equipped to prepare dilutions and mixtures as required. STANDARDIZED GRASS POLLEN EXTRACTS LABELED IN BAU/ml ARE NOT INTERCHANGEABLE WITH GRASS POLLEN EXTRACTS LABELED IN AU/ml OR WITH NON-STANDARDIZED (WEIGHT/VOLUME) GRASS POLLEN EXTRACTS. Patients being switched from other types of extracts to Allergy Laboratories should have their dose adjusted. Diagnosis of allergic disease to these grasses is made through a combined medical history sufficiently complete to identify allergic symptoms to grass pollen and identification of grass allergy by diagnostic skin testing. It is recommended that diagnostic skin testing (scratch or puncture) be performed with 10,000 BAU/ml grass pollen extracts before testing with 100,000 BAU/ml grass pollen extracts. 10,000 BAU/mL and 100,000 BAU/ml grass pollen extracts for immunotherapy are available for previously treated patients to facilitate dose selection for safe switching from non-standardized to standardized extracts. Patients being treated with grass pollen extracts for the first time can be initially immunized with dilutions prepared from the 10,000 BAU/ml extract (see Dosage and Administration). 100,000 BAU/ml grass pollen extract can be administered if the patient tolerates the 10,000 BAU/ml extract.       Grass pollen immunotherapy is intended for patients whose grass allergic symptoms cannot be satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. (5).</IndicationAndUsage>
    <Description>Standardized grass pollen extracts labeled in BAU/ml are not interchangeable with grass pollen extracts labeled in AU/ml or with non-standardized grass pollen extracts. The recommended route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. Do not inject intravenously. The extract is sterile and contains 50% (v/v) glycerin as a preservative. Standardized grass pollen extracts are available in both 10,000 BAU/ml and 100,000 BAU/ml potencies, except for Bermuda which is only available in 10,000 BAU/ml. The source material of the standardized grass extracts are the grass pollens. The 100,000 BAU/ml grass pollen extracts are prepared by extracting pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 100,000 BAU/ml. The 10,000 BAU/ml grass pollen extracts are prepared by dilution of the 100,000 BAU/ml grass pollen extracts. The 10,000 BAU/ml Bermuda grass pollen extract is prepared by extracting Bermuda grass pollen at a 1:10 w/v ratio then diluting if necessary to the appropriate range for 10,000 BAU/ml.       The potency (in Bioequivalent Allergy Units per ml or BAU/ml) of standardized grass pollen extracts is determined by an in-vitro ELISA Competition assay (1) against CBER reference extracts and CBER reference serum pools distributed by the Center for Biologics Evaluation and Research, U S Food and Drug Administration. Potency based on Bioequivalent Allergy Units (BAU/ml) is printed on the label. FDA reference grass pollen extracts were assigned potency designations based on quantitative skin testing (2). The FDA reference extracts which can be diluted 1:500,000 fold intradermally to produce a sum of erythema diameter response of 50mm in highly puncture reactive subjects have been assigned 10,000 BAU/ml. References which can be diluted 1:5,000,000 fold intraderrnally to produce a sum of erythema diameter response of 50mm have been assigned 100,000 BAU/ml.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-088-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-088-10)</PackageDescription>
    <NDC11Code>54575-0088-10</NDC11Code>
    <ProductNDC>54575-088</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hungarian Smooth Brome Pollen</ProprietaryName>
    <NonProprietaryName>Bromus Inermis Pollen</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19671207</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101376</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>BROMUS INERMIS POLLEN</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
  <NDC>
    <NDCCode>54575-089-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-089-10)</PackageDescription>
    <NDC11Code>54575-0089-10</NDC11Code>
    <ProductNDC>54575-089</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Canary Grass Pollen</ProprietaryName>
    <NonProprietaryName>Phalaris Minor Pollen</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>19671207</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA101376</ApplicationNumber>
    <LabelerName>Allergy Laboratories, Inc.</LabelerName>
    <SubstanceName>PHALARIS MINOR POLLEN</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/20mL</StrengthUnit>
    <Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
    <Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established:             Coffee             Cottonseed       Flaxseed             Housefly             Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
  </NDC>
</NDCList>