{
"NDC": [
{
"NDCCode": "54868-0024-5",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (54868-0024-5)",
"NDC11Code": "54868-0024-05",
"ProductNDC": "54868-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19880301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide."
},
{
"NDCCode": "54868-0024-1",
"PackageDescription": "40 CAPSULE in 1 BOTTLE (54868-0024-1)",
"NDC11Code": "54868-0024-01",
"ProductNDC": "54868-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19880301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide."
},
{
"NDCCode": "54868-0024-3",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (54868-0024-3)",
"NDC11Code": "54868-0024-03",
"ProductNDC": "54868-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19880301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide."
},
{
"NDCCode": "54868-0024-4",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (54868-0024-4)",
"NDC11Code": "54868-0024-04",
"ProductNDC": "54868-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19880301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide."
},
{
"NDCCode": "54868-0024-7",
"PackageDescription": "20 CAPSULE in 1 BOTTLE (54868-0024-7)",
"NDC11Code": "54868-0024-07",
"ProductNDC": "54868-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19880301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide."
},
{
"NDCCode": "54868-0024-8",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (54868-0024-8)",
"NDC11Code": "54868-0024-08",
"ProductNDC": "54868-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19880301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide."
},
{
"NDCCode": "0024-0610-30",
"PackageDescription": "1 KIT in 1 CARTON (0024-0610-30) * .5 mL in 1 SYRINGE * .5 mL in 1 SYRINGE",
"NDC11Code": "00024-0610-30",
"ProductNDC": "0024-0610",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Eligard",
"NonProprietaryName": "Leuprolide Acetate",
"DosageFormName": "KIT",
"StartMarketingDate": "20020123",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021488",
"LabelerName": "sanofi-aventis U.S. LLC",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "0024-0654-01",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (0024-0654-01) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00024-0654-01",
"ProductNDC": "0024-0654",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sarclisa",
"NonProprietaryName": "Isatuximab",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200302",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761113",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "ISATUXIMAB",
"StrengthNumber": "100",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Antibodies, Monoclonal [CS], CD38-directed Antibody Interactions [MoA], CD38-directed Cytolytic Antibody [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200302",
"SamplePackage": "N",
"IndicationAndUsage": "SARCLISA is indicated: 1 in combination with pomalidomide and dexamethasone, for the treatment of adult patients with multiple myeloma who have received at least 2 prior therapies including lenalidomide and a proteasome inhibitor., 2 in combination with carfilzomib and dexamethasone, for the treatment of adult patients with relapsed or refractory multiple myeloma who have received 1 to 3 prior lines of therapy., 3 in combination with bortezomib, lenalidomide, and dexamethasone, for the treatment of adult patients with newly diagnosed multiple myeloma who are not eligible for autologous stem cell transplant (ASCT).",
"Description": "Isatuximab-irfc, a CD38-directed cytolytic antibody, is a chimeric immunoglobulin G1 (IgG1) monoclonal antibody (mAb). Isatuximab-irfc is produced from a mammalian cell line (Chinese hamster ovary, CHO) using a fed-batch production process. Isatuximab-irfc is composed of two identical immunoglobulin kappa light chains and two identical immunoglobulin gamma heavy chains and has an overall molecular weight of approximately 148 kDa. SARCLISA (isatuximab-irfc) injection is a sterile, preservative-free, clear to slightly opalescent, colorless to slightly yellow solution, essentially free of visible particles in a single-dose vial for intravenous use. Each vial contains either 100 mg/5 mL or 500 mg/25 mL of isatuximab-irfc at a concentration of 20 mg/mL with a pH of 6.0. Each mL of solution contains 20 mg isatuximab-irfc, histidine (1.46 mg), histidine hydrochloride monohydrate (2.22 mg), polysorbate 80 (0.2 mg), sucrose (100 mg), and water for injection."
},
{
"NDCCode": "0024-2791-50",
"PackageDescription": "10 AMPULE in 1 CARTON (0024-2791-50) > 5 mL in 1 AMPULE",
"NDC11Code": "00024-2791-50",
"ProductNDC": "0024-2791",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ferrlecit",
"NonProprietaryName": "Sodium Ferric Gluconate Complex",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19990218",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020955",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "SODIUM FERRIC GLUCONATE COMPLEX",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2015-05-01"
},
{
"NDCCode": "0024-2792-10",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0024-2792-10) / 5 mL in 1 VIAL, SINGLE-USE (0024-2792-01) ",
"NDC11Code": "00024-2792-10",
"ProductNDC": "0024-2792",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ferrlecit",
"NonProprietaryName": "Sodium Ferric Gluconate Complex",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20110301",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020955",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "SODIUM FERRIC GLUCONATE COMPLEX",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Iron [CS], Parenteral Iron Replacement [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110301",
"SamplePackage": "N",
"IndicationAndUsage": "Ferrlecit is indicated for the treatment of iron deficiency anemia in adult patients and in pediatric patients age 6 years and older with chronic kidney disease receiving hemodialysis who are receiving supplemental epoetin therapy.",
"Description": "Ferrlecit® (sodium ferric gluconate complex in sucrose injection), an iron replacement product, is a stable macromolecular complex with an apparent molecular weight on gel chromatography of 289,000–440,000 daltons. The macromolecular complex is negatively charged at alkaline pH and is present in solution with sodium cations. The product has a deep red color indicative of ferric oxide linkages. The chemical name is D-Gluconic acid, iron (3+) sodium salt. The structural formula is considered to be [NaFe2O3(C6H11O7)(C12H22011)5]n≈200. Ferrlecit is supplied as a clear, dark brown liquid in colorless glass vials. Each sterile, single-dose vial of 5 mL of Ferrlecit for intravenous injection contains 62.5 mg (12.5 mg/mL) of elemental iron as the sodium salt of a ferric ion carbohydrate complex in an alkaline aqueous solution with approximately 20% sucrose w/v (195 mg/mL) in water for injection, pH 7.7–9.7. Each mL contains 9 mg of benzyl alcohol as an inactive ingredient."
},
{
"NDCCode": "0024-2794-10",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (0024-2794-10) / 5 mL in 1 VIAL, SINGLE-USE (0024-2794-01) ",
"NDC11Code": "00024-2794-10",
"ProductNDC": "0024-2794",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ferrlecit",
"NonProprietaryName": "Sodium Ferric Gluconate Complex",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20140707",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020955",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "SODIUM FERRIC GLUCONATE COMPLEX",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Iron [CS], Parenteral Iron Replacement [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140707",
"SamplePackage": "N",
"IndicationAndUsage": "Ferrlecit is indicated for the treatment of iron deficiency anemia in adult patients and in pediatric patients age 6 years and older with chronic kidney disease receiving hemodialysis who are receiving supplemental epoetin therapy.",
"Description": "Ferrlecit® (sodium ferric gluconate complex in sucrose injection), an iron replacement product, is a stable macromolecular complex with an apparent molecular weight on gel chromatography of 289,000–440,000 daltons. The macromolecular complex is negatively charged at alkaline pH and is present in solution with sodium cations. The product has a deep red color indicative of ferric oxide linkages. The chemical name is D-Gluconic acid, iron (3+) sodium salt. The structural formula is considered to be [NaFe2O3(C6H11O7)(C12H22011)5]n≈200. Ferrlecit is supplied as a clear, dark brown liquid in colorless glass vials. Each sterile, single-dose vial of 5 mL of Ferrlecit for intravenous injection contains 62.5 mg (12.5 mg/mL) of elemental iron as the sodium salt of a ferric ion carbohydrate complex in an alkaline aqueous solution with approximately 20% sucrose w/v (195 mg/mL) in water for injection, pH 7.7–9.7. Each mL contains 9 mg of benzyl alcohol as an inactive ingredient."
},
{
"NDCCode": "0024-5151-75",
"PackageDescription": "1 KIT in 1 CARTON (0024-5151-75) * 5 mL in 1 VIAL, SINGLE-USE (0024-5155-74) * 5 mL in 1 AMPULE (0024-5153-74) ",
"NDC11Code": "00024-5151-75",
"ProductNDC": "0024-5151",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Elitek",
"NonProprietaryName": "Rasburicase",
"DosageFormName": "KIT",
"StartMarketingDate": "20060601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103946",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"Status": "Active",
"LastUpdate": "2026-08-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20060601",
"SamplePackage": "N",
"IndicationAndUsage": "Elitek is indicated for the initial management of plasma uric acid levels in pediatric and adult patients with leukemia, lymphoma, and solid tumor malignancies who are receiving anticancer therapy expected to result in tumor lysis and subsequent elevation of plasma uric acid.",
"Description": "Elitek (rasburicase) is a recombinant urate-oxidase produced by a genetically modified Saccharomyces cerevisiae strain. The cDNA coding for rasburicase was cloned from a strain of Aspergillus flavus. Rasburicase is a tetrameric protein with identical subunits. Each subunit is made up of a single 301 amino acid polypeptide chain with a molecular mass of about 34 kDa. The drug product is a sterile, white to off-white, lyophilized powder intended for intravenous administration following reconstitution with a diluent. Elitek is supplied in 2 mL or 3 mL and 10 mL colorless, glass vials containing rasburicase at a concentration of 1.5 mg/mL after reconstitution. Elitek 1.5 mg presentation contains 1.5 mg rasburicase, 10.6 mg mannitol, 15.9 mg L-alanine, between 12.6 and 14.3 mg of dibasic sodium phosphate (lyophilized powder), and a diluent (1 mL Water for Injection, USP, and 1 mg Poloxamer 188). Elitek 7.5 mg presentation contains 7.5 mg of rasburicase, 53 mg mannitol, 79.5 mg L-alanine, and between 63 and 71.5 mg dibasic sodium phosphate (lyophilized powder) and a diluent (5 mL Water for Injection, USP, and 5 mg Poloxamer 188)."
},
{
"NDCCode": "0024-5761-05",
"PackageDescription": "5 SYRINGE in 1 CARTON (0024-5761-05) / 3 mL in 1 SYRINGE (0024-5761-02) ",
"NDC11Code": "00024-5761-05",
"ProductNDC": "0024-5761",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Soliqua 100/33",
"NonProprietaryName": "Insulin Glargine And Lixisenatide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20161121",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA208673",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "INSULIN GLARGINE; LIXISENATIDE",
"StrengthNumber": "100; 33",
"StrengthUnit": "U/mL; ug/mL",
"Pharm_Classes": "GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161121",
"SamplePackage": "N",
"IndicationAndUsage": "SOLIQUA 100/33 is a combination of insulin glargine and lixisenatide and is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "SOLIQUA 100/33 is a combination of insulin glargine, an insulin analog, and lixisenatide, a GLP-1 receptor agonist. Insulin glargine is a human insulin analog produced by recombinant DNA technology utilizing a nonpathogenic laboratory strain of Escherichia coli (K12) as the production organism. The minimum potency of insulin glargine is NLT 15 units/mg. Insulin glargine differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added at the C-terminus of the B-chain. Insulin glargine has low aqueous solubility at neutral pH. At pH 4 insulin glargine is completely soluble. It has a molecular weight of 6.063 kDa. Lixisenatide is a synthetic analogue of human GLP-1, which acts as a GLP-1 receptor agonist. Lixisenatide is a protein containing 44 amino acids, which is amidated at the C-terminal amino acid (position 44) and has a molecular weight of 4.8585 kDa. SOLIQUA 100/33 (insulin glargine and lixisenatide) injection is a sterile, colorless to almost colorless solution for subcutaneous use. SOLIQUA 100/33 is supplied as a prefilled single-patient-use disposable pen contain 300 units of insulin glargine and 100 mcg of lixisenatide in 3 mL of a clear, colorless to almost colorless, sterile, and aqueous solution. Each mL contains 100 units of insulin glargine and 33 mcg of lixisenatide and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), methionine (3 mg), zinc (30 mcg), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. The approximate pH is 4.5."
},
{
"NDCCode": "0024-5820-15",
"PackageDescription": "3 BLISTER PACK in 1 BOTTLE (0024-5820-15) > 5 TABLET, FILM COATED in 1 BLISTER PACK (0024-5820-05)",
"NDC11Code": "00024-5820-15",
"ProductNDC": "0024-5820",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oforta",
"NonProprietaryName": "Fludarabine Phosphate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022273",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "FLUDARABINE PHOSPHATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA],Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2015-07-17"
},
{
"NDCCode": "0024-5820-20",
"PackageDescription": "4 BLISTER PACK in 1 BOTTLE (0024-5820-20) > 5 TABLET, FILM COATED in 1 BLISTER PACK (0024-5820-05)",
"NDC11Code": "00024-5820-20",
"ProductNDC": "0024-5820",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oforta",
"NonProprietaryName": "Fludarabine Phosphate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022273",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "FLUDARABINE PHOSPHATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA],Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2015-07-17"
},
{
"NDCCode": "0024-5824-11",
"PackageDescription": "1 KIT in 1 CARTON (0024-5824-11) * 5.7 mL in 1 VIAL, GLASS (0024-5823-15) * 5.7 mL in 1 VIAL, GLASS (0024-5822-01) ",
"NDC11Code": "00024-5824-11",
"ProductNDC": "0024-5824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Jevtana",
"NonProprietaryName": "Cabazitaxel",
"DosageFormName": "KIT",
"StartMarketingDate": "20100617",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA201023",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"Status": "Active",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100617",
"SamplePackage": "N",
"IndicationAndUsage": "JEVTANA® is indicated in combination with prednisone for the treatment of patients with metastatic castration-resistant prostate cancer previously treated with a docetaxel-containing treatment regimen.",
"Description": "JEVTANA (cabazitaxel) injection is an antineoplastic agent belonging to the taxane class that is for intravenous use. It is prepared by semi-synthesis with a precursor extracted from yew needles. The chemical name of cabazitaxel is (2α,5β,7β,10β,13α)-4-acetoxy-13-({(2R,3S)-3-[(tertbutoxycarbonyl) amino]-2-hydroxy-3-phenylpropanoyl}oxy)-1-hydroxy-7,10-dimethoxy-9-oxo-5,20-epoxytax-11-en-2-yl benzoate – propan-2-one (1:1). Cabazitaxel has the following structural formula. Cabazitaxel is a white to almost-white powder with a molecular formula of C45H57NO14C3H6O and a molecular weight of 894.01 (for the acetone solvate) / 835.93 (for the solvent free). It is lipophilic, practically insoluble in water and soluble in alcohol. JEVTANA (cabazitaxel) injection 60 mg/1.5 mL is a sterile, non-pyrogenic, clear yellow to brownish-yellow viscous solution and is available in single-dose vials containing 60 mg cabazitaxel (anhydrous and solvent free) and 1.56 g polysorbate 80 (citric acid monohydrate is used to adjust the pH of the polysorbate 80 between 3.3 to 3.8). Each mL contains 40 mg cabazitaxel (anhydrous) and 1.04 g polysorbate 80. DILUENT for JEVTANA is a clear, colorless, sterile, and non-pyrogenic solution containing 13% (w/w) ethanol in water for injection, approximately 5.7 mL. JEVTANA requires two dilutions prior to intravenous infusion. JEVTANA injection should be diluted only with the supplied DILUENT for JEVTANA, followed by dilution in either 0.9% sodium chloride solution or 5% dextrose solution."
},
{
"NDCCode": "0024-5843-05",
"PackageDescription": "5 VIAL in 1 CARTON (0024-5843-05) > 1 mL in 1 VIAL (0024-5843-01) ",
"NDC11Code": "00024-5843-05",
"ProductNDC": "0024-5843",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leukine",
"NonProprietaryName": "Sargramostim",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19910501",
"EndMarketingDate": "20211230",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103362",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "SARGRAMOSTIM",
"StrengthNumber": "250",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Granulocyte Colony-Stimulating Factor [CS],Granulocyte-Macrophage Colony-Stimulating Factor [CS],Increased Myeloid Cell Production [PE],Leukocyte Growth Factor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-12-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19910501",
"EndMarketingDatePackage": "20211230",
"SamplePackage": "N"
},
{
"NDCCode": "0024-5844-05",
"PackageDescription": "5 VIAL in 1 CARTON (0024-5844-05) > 1 mL in 1 VIAL",
"NDC11Code": "00024-5844-05",
"ProductNDC": "0024-5844",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leukine",
"NonProprietaryName": "Sargramostim",
"DosageFormName": "LIQUID",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19961201",
"EndMarketingDate": "20211230",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103362",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "SARGRAMOSTIM",
"StrengthNumber": "500",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Granulocyte Colony-Stimulating Factor [CS],Granulocyte-Macrophage Colony-Stimulating Factor [CS],Increased Myeloid Cell Production [PE],Leukocyte Growth Factor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-12-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19961201",
"EndMarketingDatePackage": "20211230",
"SamplePackage": "N"
},
{
"NDCCode": "0024-5869-00",
"PackageDescription": "1 SYRINGE in 1 CARTON (0024-5869-00) / 1.5 mL in 1 SYRINGE",
"NDC11Code": "00024-5869-00",
"ProductNDC": "0024-5869",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Toujeo",
"NonProprietaryName": "Insulin Glargine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150215",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA206538",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "300",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2025-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150215",
"SamplePackage": "Y",
"IndicationAndUsage": "TOUJEO is indicated to improve glycemic control in adults and pediatric patients 6 years of age and older with diabetes mellitus.",
"Description": "Insulin glargine is a long-acting human insulin analog produced by recombinant DNA technology utilizing a nonpathogenic laboratory strain of Escherichia coli (K12) as the production organism. Insulin glargine differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines remain at the C-terminus of the B-chain. Insulin glargine has a molecular weight of 6063 Da. TOUJEO (insulin glargine) injection is a sterile, clear and colorless solution for subcutaneous injection. Each mL of TOUJEO contains 300 units of insulin glargine dissolved in a clear aqueous fluid. The 1.5 mL TOUJEO SoloStar prefilled pen presentation contains the following inactive ingredients per mL: glycerin (20 mg), metacresol (2.7 mg), zinc (90 mcg), and Water for Injection, USP. The 3 mL TOUJEO Max SoloStar prefilled pen presentation contains the following inactive ingredients per mL: glycerin (20 mg), metacresol (2.7 mg), zinc (90 mcg), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and sodium hydroxide. TOUJEO has a pH of approximately 4."
},
{
"NDCCode": "0024-5869-03",
"PackageDescription": "3 SYRINGE in 1 CARTON (0024-5869-03) / 1.5 mL in 1 SYRINGE (0024-5869-01) ",
"NDC11Code": "00024-5869-03",
"ProductNDC": "0024-5869",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Toujeo",
"NonProprietaryName": "Insulin Glargine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150215",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA206538",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "300",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2025-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150215",
"SamplePackage": "N",
"IndicationAndUsage": "TOUJEO is indicated to improve glycemic control in adults and pediatric patients 6 years of age and older with diabetes mellitus.",
"Description": "Insulin glargine is a long-acting human insulin analog produced by recombinant DNA technology utilizing a nonpathogenic laboratory strain of Escherichia coli (K12) as the production organism. Insulin glargine differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines remain at the C-terminus of the B-chain. Insulin glargine has a molecular weight of 6063 Da. TOUJEO (insulin glargine) injection is a sterile, clear and colorless solution for subcutaneous injection. Each mL of TOUJEO contains 300 units of insulin glargine dissolved in a clear aqueous fluid. The 1.5 mL TOUJEO SoloStar prefilled pen presentation contains the following inactive ingredients per mL: glycerin (20 mg), metacresol (2.7 mg), zinc (90 mcg), and Water for Injection, USP. The 3 mL TOUJEO Max SoloStar prefilled pen presentation contains the following inactive ingredients per mL: glycerin (20 mg), metacresol (2.7 mg), zinc (90 mcg), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and sodium hydroxide. TOUJEO has a pH of approximately 4."
},
{
"NDCCode": "0024-5869-05",
"PackageDescription": "5 SYRINGE in 1 CARTON (0024-5869-05) > 1.5 mL in 1 SYRINGE (0024-5869-01)",
"NDC11Code": "00024-5869-05",
"ProductNDC": "0024-5869",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Toujeo",
"NonProprietaryName": "Insulin Glargine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150225",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA206538",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "INSULIN GLARGINE",
"StrengthNumber": "300",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin [Chemical/Ingredient],Insulin Analog [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-03-30",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0024-5925-05",
"PackageDescription": "5 SYRINGE in 1 CARTON (0024-5925-05) / 3 mL in 1 SYRINGE (0024-5925-01) ",
"NDC11Code": "00024-5925-05",
"ProductNDC": "0024-5925",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Admelog",
"NonProprietaryName": "Insulin Lispro",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20171211",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA209196",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "INSULIN LISPRO",
"StrengthNumber": "100",
"StrengthUnit": "U/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [Chemical/Ingredient]",
"Status": "Active",
"LastUpdate": "2025-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171211",
"SamplePackage": "N",
"IndicationAndUsage": "ADMELOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.",
"Description": "Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Insulin lispro has a molecular weight of 5808 Da, identical to that of human insulin. ADMELOG (insulin lispro) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each mL of ADMELOG contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.88 mg), glycerin (16 mg), metacresol (3.15 mg), zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin lispro has a pH of 7.0 to 7.8. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. ADMELOG is latex free."
},
{
"NDCCode": "0024-5928-05",
"PackageDescription": "5 SYRINGE in 1 BOX (0024-5928-05) / 3 mL in 1 SYRINGE (0024-5928-00) ",
"NDC11Code": "00024-5928-05",
"ProductNDC": "0024-5928",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Merilog",
"NonProprietaryName": "Insulin Aspart-szjj",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20250214",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761325",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "INSULIN ASPART",
"StrengthNumber": "100",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Insulin Analog [EPC], Insulin [CS]",
"Status": "Active",
"LastUpdate": "2025-11-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250214",
"SamplePackage": "N",
"IndicationAndUsage": "MERILOG is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.",
"Description": "Insulin aspart-szjj is a rapid-acting human insulin analog homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Escherichia coli. Insulin aspart-szjj has a molecular weight of 5825.8 Da. MERILOG (insulin aspart-szjj) injection is a sterile, clear, and colorless solution for subcutaneous use. Each mL contains 100 units of insulin aspart-szjj and the inactive ingredients: 1.72 mg metacresol, 1.50 mg phenol, 0.02 mg polysorbate 20, 6.80 mg sodium chloride, 0.04 mg zinc chloride and Water for Injection, USP. MERILOG has a pH of 7.0–7.8. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH."
},
{
"NDCCode": "10210-0024-5",
"PackageDescription": "3 TUBE in 1 BLISTER PACK (10210-0024-5) > 4.25 g in 1 TUBE",
"NDC11Code": "10210-0024-05",
"ProductNDC": "10210-0024",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Carmex Classic Lip Balm Cherry Spf 15",
"NonProprietaryName": "Octinoxate, Oxybenzone, Petrolatum",
"DosageFormName": "SALVE",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160926",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Carma Laboratories, Inc.",
"SubstanceName": "OCTINOXATE; OXYBENZONE; PETROLATUM",
"StrengthNumber": "7.5; 4; 35",
"StrengthUnit": "g/100g; g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-12-05",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "11822-0024-5",
"PackageDescription": "1 BOTTLE in 1 CAPSULE (11822-0024-5) / 14 CAPSULE, DELAYED RELEASE in 1 BOTTLE",
"NDC11Code": "11822-0024-05",
"ProductNDC": "11822-0024",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esomeprazole Magnesium",
"NonProprietaryName": "Esomeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200626",
"EndMarketingDate": "20261031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207193",
"LabelerName": "Rite Aid Corporation",
"SubstanceName": "ESOMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200701",
"EndMarketingDatePackage": "20261031",
"SamplePackage": "N",
"IndicationAndUsage": "treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect."
},
{
"NDCCode": "14403-0024-2",
"PackageDescription": "5 g in 1 BOTTLE (14403-0024-2) ",
"NDC11Code": "14403-0024-02",
"ProductNDC": "14403-0024",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Semaglutide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20251212",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Hybio Pharmaceutical Co., Ltd.",
"SubstanceName": "SEMAGLUTIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2025-12-16",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "12-DEC-25"
},
{
"NDCCode": "14403-0024-5",
"PackageDescription": "500 g in 1 BAG (14403-0024-5) ",
"NDC11Code": "14403-0024-05",
"ProductNDC": "14403-0024",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Semaglutide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20260506",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Hybio Pharmaceutical Co. Ltd",
"SubstanceName": "SEMAGLUTIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-05-07",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "06-MAY-26"
},
{
"NDCCode": "14403-0024-7",
"PackageDescription": "5 g in 1 BAG (14403-0024-7) ",
"NDC11Code": "14403-0024-07",
"ProductNDC": "14403-0024",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Semaglutide",
"DosageFormName": "POWDER",
"StartMarketingDate": "20260507",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Hybio Pharmaceutical Co. Ltd",
"SubstanceName": "SEMAGLUTIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-05-08",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "07-MAY-26"
},
{
"NDCCode": "15631-0024-5",
"PackageDescription": "12500 PELLET in 1 PACKAGE (15631-0024-5) ",
"NDC11Code": "15631-0024-05",
"ProductNDC": "15631-0024",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ambrosia Artemisiaefolia",
"NonProprietaryName": "Ambrosia Artemisiaefolia",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150906",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "AMBROSIA ARTEMISIIFOLIA",
"StrengthNumber": "1",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180101",
"SamplePackage": "N",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "24002-0024-0",
"PackageDescription": "5 kg in 1 DRUM (24002-0024-0) ",
"NDC11Code": "24002-0024-00",
"ProductNDC": "24002-0024",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Betamethasone Sodium Phosphate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20121221",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Newchem spa",
"SubstanceName": "BETAMETHASONE SODIUM PHOSPHATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2023-01-14",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "21-DEC-12"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>54868-0024-5</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (54868-0024-5)</PackageDescription>
<NDC11Code>54868-0024-05</NDC11Code>
<ProductNDC>54868-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-0024-1</NDCCode>
<PackageDescription>40 CAPSULE in 1 BOTTLE (54868-0024-1)</PackageDescription>
<NDC11Code>54868-0024-01</NDC11Code>
<ProductNDC>54868-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-0024-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (54868-0024-3)</PackageDescription>
<NDC11Code>54868-0024-03</NDC11Code>
<ProductNDC>54868-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-0024-4</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (54868-0024-4)</PackageDescription>
<NDC11Code>54868-0024-04</NDC11Code>
<ProductNDC>54868-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-0024-7</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE (54868-0024-7)</PackageDescription>
<NDC11Code>54868-0024-07</NDC11Code>
<ProductNDC>54868-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-0024-8</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (54868-0024-8)</PackageDescription>
<NDC11Code>54868-0024-08</NDC11Code>
<ProductNDC>54868-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0024-0610-30</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0024-0610-30) * .5 mL in 1 SYRINGE * .5 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00024-0610-30</NDC11Code>
<ProductNDC>0024-0610</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Eligard</ProprietaryName>
<NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20020123</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021488</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>0024-0654-01</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0024-0654-01) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00024-0654-01</NDC11Code>
<ProductNDC>0024-0654</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sarclisa</ProprietaryName>
<NonProprietaryName>Isatuximab</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200302</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761113</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>ISATUXIMAB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Antibodies, Monoclonal [CS], CD38-directed Antibody Interactions [MoA], CD38-directed Cytolytic Antibody [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SARCLISA is indicated: 1 in combination with pomalidomide and dexamethasone, for the treatment of adult patients with multiple myeloma who have received at least 2 prior therapies including lenalidomide and a proteasome inhibitor., 2 in combination with carfilzomib and dexamethasone, for the treatment of adult patients with relapsed or refractory multiple myeloma who have received 1 to 3 prior lines of therapy., 3 in combination with bortezomib, lenalidomide, and dexamethasone, for the treatment of adult patients with newly diagnosed multiple myeloma who are not eligible for autologous stem cell transplant (ASCT).</IndicationAndUsage>
<Description>Isatuximab-irfc, a CD38-directed cytolytic antibody, is a chimeric immunoglobulin G1 (IgG1) monoclonal antibody (mAb). Isatuximab-irfc is produced from a mammalian cell line (Chinese hamster ovary, CHO) using a fed-batch production process. Isatuximab-irfc is composed of two identical immunoglobulin kappa light chains and two identical immunoglobulin gamma heavy chains and has an overall molecular weight of approximately 148 kDa. SARCLISA (isatuximab-irfc) injection is a sterile, preservative-free, clear to slightly opalescent, colorless to slightly yellow solution, essentially free of visible particles in a single-dose vial for intravenous use. Each vial contains either 100 mg/5 mL or 500 mg/25 mL of isatuximab-irfc at a concentration of 20 mg/mL with a pH of 6.0. Each mL of solution contains 20 mg isatuximab-irfc, histidine (1.46 mg), histidine hydrochloride monohydrate (2.22 mg), polysorbate 80 (0.2 mg), sucrose (100 mg), and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>0024-2791-50</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (0024-2791-50) > 5 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00024-2791-50</NDC11Code>
<ProductNDC>0024-2791</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ferrlecit</ProprietaryName>
<NonProprietaryName>Sodium Ferric Gluconate Complex</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19990218</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020955</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>SODIUM FERRIC GLUCONATE COMPLEX</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2015-05-01</LastUpdate>
</NDC>
<NDC>
<NDCCode>0024-2792-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0024-2792-10) / 5 mL in 1 VIAL, SINGLE-USE (0024-2792-01) </PackageDescription>
<NDC11Code>00024-2792-10</NDC11Code>
<ProductNDC>0024-2792</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ferrlecit</ProprietaryName>
<NonProprietaryName>Sodium Ferric Gluconate Complex</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20110301</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020955</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>SODIUM FERRIC GLUCONATE COMPLEX</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Iron [CS], Parenteral Iron Replacement [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ferrlecit is indicated for the treatment of iron deficiency anemia in adult patients and in pediatric patients age 6 years and older with chronic kidney disease receiving hemodialysis who are receiving supplemental epoetin therapy.</IndicationAndUsage>
<Description>Ferrlecit® (sodium ferric gluconate complex in sucrose injection), an iron replacement product, is a stable macromolecular complex with an apparent molecular weight on gel chromatography of 289,000–440,000 daltons. The macromolecular complex is negatively charged at alkaline pH and is present in solution with sodium cations. The product has a deep red color indicative of ferric oxide linkages. The chemical name is D-Gluconic acid, iron (3+) sodium salt. The structural formula is considered to be [NaFe2O3(C6H11O7)(C12H22011)5]n≈200. Ferrlecit is supplied as a clear, dark brown liquid in colorless glass vials. Each sterile, single-dose vial of 5 mL of Ferrlecit for intravenous injection contains 62.5 mg (12.5 mg/mL) of elemental iron as the sodium salt of a ferric ion carbohydrate complex in an alkaline aqueous solution with approximately 20% sucrose w/v (195 mg/mL) in water for injection, pH 7.7–9.7. Each mL contains 9 mg of benzyl alcohol as an inactive ingredient.</Description>
</NDC>
<NDC>
<NDCCode>0024-2794-10</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (0024-2794-10) / 5 mL in 1 VIAL, SINGLE-USE (0024-2794-01) </PackageDescription>
<NDC11Code>00024-2794-10</NDC11Code>
<ProductNDC>0024-2794</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ferrlecit</ProprietaryName>
<NonProprietaryName>Sodium Ferric Gluconate Complex</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20140707</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020955</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>SODIUM FERRIC GLUCONATE COMPLEX</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Iron [CS], Parenteral Iron Replacement [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140707</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ferrlecit is indicated for the treatment of iron deficiency anemia in adult patients and in pediatric patients age 6 years and older with chronic kidney disease receiving hemodialysis who are receiving supplemental epoetin therapy.</IndicationAndUsage>
<Description>Ferrlecit® (sodium ferric gluconate complex in sucrose injection), an iron replacement product, is a stable macromolecular complex with an apparent molecular weight on gel chromatography of 289,000–440,000 daltons. The macromolecular complex is negatively charged at alkaline pH and is present in solution with sodium cations. The product has a deep red color indicative of ferric oxide linkages. The chemical name is D-Gluconic acid, iron (3+) sodium salt. The structural formula is considered to be [NaFe2O3(C6H11O7)(C12H22011)5]n≈200. Ferrlecit is supplied as a clear, dark brown liquid in colorless glass vials. Each sterile, single-dose vial of 5 mL of Ferrlecit for intravenous injection contains 62.5 mg (12.5 mg/mL) of elemental iron as the sodium salt of a ferric ion carbohydrate complex in an alkaline aqueous solution with approximately 20% sucrose w/v (195 mg/mL) in water for injection, pH 7.7–9.7. Each mL contains 9 mg of benzyl alcohol as an inactive ingredient.</Description>
</NDC>
<NDC>
<NDCCode>0024-5151-75</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0024-5151-75) * 5 mL in 1 VIAL, SINGLE-USE (0024-5155-74) * 5 mL in 1 AMPULE (0024-5153-74) </PackageDescription>
<NDC11Code>00024-5151-75</NDC11Code>
<ProductNDC>0024-5151</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Elitek</ProprietaryName>
<NonProprietaryName>Rasburicase</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20060601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103946</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-08-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Elitek is indicated for the initial management of plasma uric acid levels in pediatric and adult patients with leukemia, lymphoma, and solid tumor malignancies who are receiving anticancer therapy expected to result in tumor lysis and subsequent elevation of plasma uric acid.</IndicationAndUsage>
<Description>Elitek (rasburicase) is a recombinant urate-oxidase produced by a genetically modified Saccharomyces cerevisiae strain. The cDNA coding for rasburicase was cloned from a strain of Aspergillus flavus. Rasburicase is a tetrameric protein with identical subunits. Each subunit is made up of a single 301 amino acid polypeptide chain with a molecular mass of about 34 kDa. The drug product is a sterile, white to off-white, lyophilized powder intended for intravenous administration following reconstitution with a diluent. Elitek is supplied in 2 mL or 3 mL and 10 mL colorless, glass vials containing rasburicase at a concentration of 1.5 mg/mL after reconstitution. Elitek 1.5 mg presentation contains 1.5 mg rasburicase, 10.6 mg mannitol, 15.9 mg L-alanine, between 12.6 and 14.3 mg of dibasic sodium phosphate (lyophilized powder), and a diluent (1 mL Water for Injection, USP, and 1 mg Poloxamer 188). Elitek 7.5 mg presentation contains 7.5 mg of rasburicase, 53 mg mannitol, 79.5 mg L-alanine, and between 63 and 71.5 mg dibasic sodium phosphate (lyophilized powder) and a diluent (5 mL Water for Injection, USP, and 5 mg Poloxamer 188).</Description>
</NDC>
<NDC>
<NDCCode>0024-5761-05</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0024-5761-05) / 3 mL in 1 SYRINGE (0024-5761-02) </PackageDescription>
<NDC11Code>00024-5761-05</NDC11Code>
<ProductNDC>0024-5761</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Soliqua 100/33</ProprietaryName>
<NonProprietaryName>Insulin Glargine And Lixisenatide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20161121</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA208673</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN GLARGINE; LIXISENATIDE</SubstanceName>
<StrengthNumber>100; 33</StrengthNumber>
<StrengthUnit>U/mL; ug/mL</StrengthUnit>
<Pharm_Classes>GLP-1 Receptor Agonist [EPC], Glucagon-Like Peptide 1 [CS], Glucagon-like Peptide-1 (GLP-1) Agonists [MoA], Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SOLIQUA 100/33 is a combination of insulin glargine and lixisenatide and is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>SOLIQUA 100/33 is a combination of insulin glargine, an insulin analog, and lixisenatide, a GLP-1 receptor agonist. Insulin glargine is a human insulin analog produced by recombinant DNA technology utilizing a nonpathogenic laboratory strain of Escherichia coli (K12) as the production organism. The minimum potency of insulin glargine is NLT 15 units/mg. Insulin glargine differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines are added at the C-terminus of the B-chain. Insulin glargine has low aqueous solubility at neutral pH. At pH 4 insulin glargine is completely soluble. It has a molecular weight of 6.063 kDa. Lixisenatide is a synthetic analogue of human GLP-1, which acts as a GLP-1 receptor agonist. Lixisenatide is a protein containing 44 amino acids, which is amidated at the C-terminal amino acid (position 44) and has a molecular weight of 4.8585 kDa. SOLIQUA 100/33 (insulin glargine and lixisenatide) injection is a sterile, colorless to almost colorless solution for subcutaneous use. SOLIQUA 100/33 is supplied as a prefilled single-patient-use disposable pen contain 300 units of insulin glargine and 100 mcg of lixisenatide in 3 mL of a clear, colorless to almost colorless, sterile, and aqueous solution. Each mL contains 100 units of insulin glargine and 33 mcg of lixisenatide and the inactive ingredients: glycerol (20 mg), metacresol (2.7 mg), methionine (3 mg), zinc (30 mcg), and Water for Injection, USP. Hydrochloric acid and/or sodium hydroxide may be added to adjust the pH. The approximate pH is 4.5.</Description>
</NDC>
<NDC>
<NDCCode>0024-5820-15</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 BOTTLE (0024-5820-15) > 5 TABLET, FILM COATED in 1 BLISTER PACK (0024-5820-05)</PackageDescription>
<NDC11Code>00024-5820-15</NDC11Code>
<ProductNDC>0024-5820</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oforta</ProprietaryName>
<NonProprietaryName>Fludarabine Phosphate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022273</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>FLUDARABINE PHOSPHATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA],Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-07-17</LastUpdate>
</NDC>
<NDC>
<NDCCode>0024-5820-20</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 BOTTLE (0024-5820-20) > 5 TABLET, FILM COATED in 1 BLISTER PACK (0024-5820-05)</PackageDescription>
<NDC11Code>00024-5820-20</NDC11Code>
<ProductNDC>0024-5820</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oforta</ProprietaryName>
<NonProprietaryName>Fludarabine Phosphate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091231</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022273</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>FLUDARABINE PHOSPHATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA],Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-07-17</LastUpdate>
</NDC>
<NDC>
<NDCCode>0024-5824-11</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0024-5824-11) * 5.7 mL in 1 VIAL, GLASS (0024-5823-15) * 5.7 mL in 1 VIAL, GLASS (0024-5822-01) </PackageDescription>
<NDC11Code>00024-5824-11</NDC11Code>
<ProductNDC>0024-5824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Jevtana</ProprietaryName>
<NonProprietaryName>Cabazitaxel</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20100617</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA201023</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>JEVTANA® is indicated in combination with prednisone for the treatment of patients with metastatic castration-resistant prostate cancer previously treated with a docetaxel-containing treatment regimen.</IndicationAndUsage>
<Description>JEVTANA (cabazitaxel) injection is an antineoplastic agent belonging to the taxane class that is for intravenous use. It is prepared by semi-synthesis with a precursor extracted from yew needles. The chemical name of cabazitaxel is (2α,5β,7β,10β,13α)-4-acetoxy-13-({(2R,3S)-3-[(tertbutoxycarbonyl) amino]-2-hydroxy-3-phenylpropanoyl}oxy)-1-hydroxy-7,10-dimethoxy-9-oxo-5,20-epoxytax-11-en-2-yl benzoate – propan-2-one (1:1). Cabazitaxel has the following structural formula. Cabazitaxel is a white to almost-white powder with a molecular formula of C45H57NO14C3H6O and a molecular weight of 894.01 (for the acetone solvate) / 835.93 (for the solvent free). It is lipophilic, practically insoluble in water and soluble in alcohol. JEVTANA (cabazitaxel) injection 60 mg/1.5 mL is a sterile, non-pyrogenic, clear yellow to brownish-yellow viscous solution and is available in single-dose vials containing 60 mg cabazitaxel (anhydrous and solvent free) and 1.56 g polysorbate 80 (citric acid monohydrate is used to adjust the pH of the polysorbate 80 between 3.3 to 3.8). Each mL contains 40 mg cabazitaxel (anhydrous) and 1.04 g polysorbate 80. DILUENT for JEVTANA is a clear, colorless, sterile, and non-pyrogenic solution containing 13% (w/w) ethanol in water for injection, approximately 5.7 mL. JEVTANA requires two dilutions prior to intravenous infusion. JEVTANA injection should be diluted only with the supplied DILUENT for JEVTANA, followed by dilution in either 0.9% sodium chloride solution or 5% dextrose solution.</Description>
</NDC>
<NDC>
<NDCCode>0024-5843-05</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (0024-5843-05) > 1 mL in 1 VIAL (0024-5843-01) </PackageDescription>
<NDC11Code>00024-5843-05</NDC11Code>
<ProductNDC>0024-5843</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leukine</ProprietaryName>
<NonProprietaryName>Sargramostim</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19910501</StartMarketingDate>
<EndMarketingDate>20211230</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103362</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>SARGRAMOSTIM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Granulocyte Colony-Stimulating Factor [CS],Granulocyte-Macrophage Colony-Stimulating Factor [CS],Increased Myeloid Cell Production [PE],Leukocyte Growth Factor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-12-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19910501</StartMarketingDatePackage>
<EndMarketingDatePackage>20211230</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0024-5844-05</NDCCode>
<PackageDescription>5 VIAL in 1 CARTON (0024-5844-05) > 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>00024-5844-05</NDC11Code>
<ProductNDC>0024-5844</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leukine</ProprietaryName>
<NonProprietaryName>Sargramostim</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19961201</StartMarketingDate>
<EndMarketingDate>20211230</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103362</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>SARGRAMOSTIM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Granulocyte Colony-Stimulating Factor [CS],Granulocyte-Macrophage Colony-Stimulating Factor [CS],Increased Myeloid Cell Production [PE],Leukocyte Growth Factor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-12-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19961201</StartMarketingDatePackage>
<EndMarketingDatePackage>20211230</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0024-5869-00</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (0024-5869-00) / 1.5 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00024-5869-00</NDC11Code>
<ProductNDC>0024-5869</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Toujeo</ProprietaryName>
<NonProprietaryName>Insulin Glargine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150215</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA206538</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150215</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>TOUJEO is indicated to improve glycemic control in adults and pediatric patients 6 years of age and older with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin glargine is a long-acting human insulin analog produced by recombinant DNA technology utilizing a nonpathogenic laboratory strain of Escherichia coli (K12) as the production organism. Insulin glargine differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines remain at the C-terminus of the B-chain. Insulin glargine has a molecular weight of 6063 Da. TOUJEO (insulin glargine) injection is a sterile, clear and colorless solution for subcutaneous injection. Each mL of TOUJEO contains 300 units of insulin glargine dissolved in a clear aqueous fluid. The 1.5 mL TOUJEO SoloStar prefilled pen presentation contains the following inactive ingredients per mL: glycerin (20 mg), metacresol (2.7 mg), zinc (90 mcg), and Water for Injection, USP. The 3 mL TOUJEO Max SoloStar prefilled pen presentation contains the following inactive ingredients per mL: glycerin (20 mg), metacresol (2.7 mg), zinc (90 mcg), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and sodium hydroxide. TOUJEO has a pH of approximately 4.</Description>
</NDC>
<NDC>
<NDCCode>0024-5869-03</NDCCode>
<PackageDescription>3 SYRINGE in 1 CARTON (0024-5869-03) / 1.5 mL in 1 SYRINGE (0024-5869-01) </PackageDescription>
<NDC11Code>00024-5869-03</NDC11Code>
<ProductNDC>0024-5869</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Toujeo</ProprietaryName>
<NonProprietaryName>Insulin Glargine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150215</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA206538</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TOUJEO is indicated to improve glycemic control in adults and pediatric patients 6 years of age and older with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin glargine is a long-acting human insulin analog produced by recombinant DNA technology utilizing a nonpathogenic laboratory strain of Escherichia coli (K12) as the production organism. Insulin glargine differs from human insulin in that the amino acid asparagine at position A21 is replaced by glycine and two arginines remain at the C-terminus of the B-chain. Insulin glargine has a molecular weight of 6063 Da. TOUJEO (insulin glargine) injection is a sterile, clear and colorless solution for subcutaneous injection. Each mL of TOUJEO contains 300 units of insulin glargine dissolved in a clear aqueous fluid. The 1.5 mL TOUJEO SoloStar prefilled pen presentation contains the following inactive ingredients per mL: glycerin (20 mg), metacresol (2.7 mg), zinc (90 mcg), and Water for Injection, USP. The 3 mL TOUJEO Max SoloStar prefilled pen presentation contains the following inactive ingredients per mL: glycerin (20 mg), metacresol (2.7 mg), zinc (90 mcg), and Water for Injection, USP. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and sodium hydroxide. TOUJEO has a pH of approximately 4.</Description>
</NDC>
<NDC>
<NDCCode>0024-5869-05</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0024-5869-05) > 1.5 mL in 1 SYRINGE (0024-5869-01)</PackageDescription>
<NDC11Code>00024-5869-05</NDC11Code>
<ProductNDC>0024-5869</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Toujeo</ProprietaryName>
<NonProprietaryName>Insulin Glargine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150225</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA206538</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN GLARGINE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin [Chemical/Ingredient],Insulin Analog [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-30</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0024-5925-05</NDCCode>
<PackageDescription>5 SYRINGE in 1 CARTON (0024-5925-05) / 3 mL in 1 SYRINGE (0024-5925-01) </PackageDescription>
<NDC11Code>00024-5925-05</NDC11Code>
<ProductNDC>0024-5925</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Admelog</ProprietaryName>
<NonProprietaryName>Insulin Lispro</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20171211</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA209196</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN LISPRO</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>U/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [Chemical/Ingredient]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ADMELOG is indicated to improve glycemic control in adult and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin lispro is a rapid-acting human insulin analog produced by recombinant DNA technology utilizing a non-pathogenic laboratory strain of Escherichia coli. Insulin lispro differs from human insulin in that the amino acid proline at position B28 is replaced by lysine and the lysine in position B29 is replaced by proline. Insulin lispro has a molecular weight of 5808 Da, identical to that of human insulin. ADMELOG (insulin lispro) injection is a sterile, aqueous, clear, and colorless solution for subcutaneous or intravenous use. Each mL of ADMELOG contains 100 units of insulin lispro, and the inactive ingredients: dibasic sodium phosphate (1.88 mg), glycerin (16 mg), metacresol (3.15 mg), zinc oxide (content adjusted to provide 0.0197 mg zinc ion), and Water for Injection, USP. Insulin lispro has a pH of 7.0 to 7.8. The pH is adjusted by addition of aqueous solutions of hydrochloric acid and/or sodium hydroxide. ADMELOG is latex free.</Description>
</NDC>
<NDC>
<NDCCode>0024-5928-05</NDCCode>
<PackageDescription>5 SYRINGE in 1 BOX (0024-5928-05) / 3 mL in 1 SYRINGE (0024-5928-00) </PackageDescription>
<NDC11Code>00024-5928-05</NDC11Code>
<ProductNDC>0024-5928</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Merilog</ProprietaryName>
<NonProprietaryName>Insulin Aspart-szjj</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250214</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761325</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>INSULIN ASPART</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Insulin Analog [EPC], Insulin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MERILOG is indicated to improve glycemic control in adults and pediatric patients with diabetes mellitus.</IndicationAndUsage>
<Description>Insulin aspart-szjj is a rapid-acting human insulin analog homologous with regular human insulin with the exception of a single substitution of the amino acid proline by aspartic acid in position B28, and is produced by recombinant DNA technology utilizing Escherichia coli. Insulin aspart-szjj has a molecular weight of 5825.8 Da. MERILOG (insulin aspart-szjj) injection is a sterile, clear, and colorless solution for subcutaneous use. Each mL contains 100 units of insulin aspart-szjj and the inactive ingredients: 1.72 mg metacresol, 1.50 mg phenol, 0.02 mg polysorbate 20, 6.80 mg sodium chloride, 0.04 mg zinc chloride and Water for Injection, USP. MERILOG has a pH of 7.0–7.8. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>10210-0024-5</NDCCode>
<PackageDescription>3 TUBE in 1 BLISTER PACK (10210-0024-5) > 4.25 g in 1 TUBE</PackageDescription>
<NDC11Code>10210-0024-05</NDC11Code>
<ProductNDC>10210-0024</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Carmex Classic Lip Balm Cherry Spf 15</ProprietaryName>
<NonProprietaryName>Octinoxate, Oxybenzone, Petrolatum</NonProprietaryName>
<DosageFormName>SALVE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160926</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Carma Laboratories, Inc.</LabelerName>
<SubstanceName>OCTINOXATE; OXYBENZONE; PETROLATUM</SubstanceName>
<StrengthNumber>7.5; 4; 35</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-12-05</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>11822-0024-5</NDCCode>
<PackageDescription>1 BOTTLE in 1 CAPSULE (11822-0024-5) / 14 CAPSULE, DELAYED RELEASE in 1 BOTTLE</PackageDescription>
<NDC11Code>11822-0024-05</NDC11Code>
<ProductNDC>11822-0024</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
<NonProprietaryName>Esomeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200626</StartMarketingDate>
<EndMarketingDate>20261031</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207193</ApplicationNumber>
<LabelerName>Rite Aid Corporation</LabelerName>
<SubstanceName>ESOMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200701</StartMarketingDatePackage>
<EndMarketingDatePackage>20261031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>14403-0024-2</NDCCode>
<PackageDescription>5 g in 1 BOTTLE (14403-0024-2) </PackageDescription>
<NDC11Code>14403-0024-02</NDC11Code>
<ProductNDC>14403-0024</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Semaglutide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20251212</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Hybio Pharmaceutical Co., Ltd.</LabelerName>
<SubstanceName>SEMAGLUTIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-12-16</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>12-DEC-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14403-0024-5</NDCCode>
<PackageDescription>500 g in 1 BAG (14403-0024-5) </PackageDescription>
<NDC11Code>14403-0024-05</NDC11Code>
<ProductNDC>14403-0024</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Semaglutide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20260506</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Hybio Pharmaceutical Co. Ltd</LabelerName>
<SubstanceName>SEMAGLUTIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-05-07</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>06-MAY-26</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>14403-0024-7</NDCCode>
<PackageDescription>5 g in 1 BAG (14403-0024-7) </PackageDescription>
<NDC11Code>14403-0024-07</NDC11Code>
<ProductNDC>14403-0024</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Semaglutide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20260507</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Hybio Pharmaceutical Co. Ltd</LabelerName>
<SubstanceName>SEMAGLUTIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-05-08</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>07-MAY-26</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>15631-0024-5</NDCCode>
<PackageDescription>12500 PELLET in 1 PACKAGE (15631-0024-5) </PackageDescription>
<NDC11Code>15631-0024-05</NDC11Code>
<ProductNDC>15631-0024</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ambrosia Artemisiaefolia</ProprietaryName>
<NonProprietaryName>Ambrosia Artemisiaefolia</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150906</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>AMBROSIA ARTEMISIIFOLIA</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>24002-0024-0</NDCCode>
<PackageDescription>5 kg in 1 DRUM (24002-0024-0) </PackageDescription>
<NDC11Code>24002-0024-00</NDC11Code>
<ProductNDC>24002-0024</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Betamethasone Sodium Phosphate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20121221</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Newchem spa</LabelerName>
<SubstanceName>BETAMETHASONE SODIUM PHOSPHATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2023-01-14</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>21-DEC-12</StartMarketingDatePackage>
</NDC>
</NDCList>