{
"NDC": [
{
"NDCCode": "54868-0075-3",
"PackageDescription": "60 TABLET in 1 BOTTLE (54868-0075-3)",
"NDC11Code": "54868-0075-03",
"ProductNDC": "54868-0075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020510",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018832",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "ALLOPURINOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC],Xanthine Oxidase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "THIS IS NOT AN INNOCUOUS DRUG. IT IS NOT RECOMMENDED FOR THE TREATMENT OF ASYMPTOMATIC HYPERURICEMIA. Allopurinol reduces serum and urinary uric acid concentrations. Its use should be individualized for each patient and requires an understanding of its mode of action and pharmacokinetics (see CLINICAL PHARMACOLOGY, CONTRAINDICATIONS, WARNINGS and PRECAUTIONS). Allopurinol is indicated in: 1 the management of patients with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy)., 2 the management of patients with leukemia, lymphoma and malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels. Allopurinol treatment should be discontinued when the potential for overproduction of uric acid is no longer present., 3 the management of patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients. Therapy in such patients should be carefully assessed initially and reassessed periodically to determine in each case that treatment is beneficial and that the benefits outweigh the risks.",
"Description": "Allopurinol is known chemically as 1,5-Dihydro-4H-pyrazolo[3,4-d ]pyrimidin-4-one. It is a xanthine oxidase inhibitor which is administered orally. Its solubility in water at 37°C is 80 mg/dL and is greater in an alkaline solution. The structural formula is represented below. C5H4N4O M.W. 136.11. Allopurinol Tablets USP, 100 mg and 300 mg contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. Allopurinol Tablets USP, 300 mg also contain FD&C Yellow No. 6."
},
{
"NDCCode": "54868-0075-0",
"PackageDescription": "30 TABLET in 1 BOTTLE (54868-0075-0)",
"NDC11Code": "54868-0075-00",
"ProductNDC": "54868-0075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020510",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018832",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "ALLOPURINOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC],Xanthine Oxidase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "THIS IS NOT AN INNOCUOUS DRUG. IT IS NOT RECOMMENDED FOR THE TREATMENT OF ASYMPTOMATIC HYPERURICEMIA. Allopurinol reduces serum and urinary uric acid concentrations. Its use should be individualized for each patient and requires an understanding of its mode of action and pharmacokinetics (see CLINICAL PHARMACOLOGY, CONTRAINDICATIONS, WARNINGS and PRECAUTIONS). Allopurinol is indicated in: 1 the management of patients with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy)., 2 the management of patients with leukemia, lymphoma and malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels. Allopurinol treatment should be discontinued when the potential for overproduction of uric acid is no longer present., 3 the management of patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients. Therapy in such patients should be carefully assessed initially and reassessed periodically to determine in each case that treatment is beneficial and that the benefits outweigh the risks.",
"Description": "Allopurinol is known chemically as 1,5-Dihydro-4H-pyrazolo[3,4-d ]pyrimidin-4-one. It is a xanthine oxidase inhibitor which is administered orally. Its solubility in water at 37°C is 80 mg/dL and is greater in an alkaline solution. The structural formula is represented below. C5H4N4O M.W. 136.11. Allopurinol Tablets USP, 100 mg and 300 mg contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. Allopurinol Tablets USP, 300 mg also contain FD&C Yellow No. 6."
},
{
"NDCCode": "54868-0075-4",
"PackageDescription": "100 TABLET in 1 BOTTLE (54868-0075-4)",
"NDC11Code": "54868-0075-04",
"ProductNDC": "54868-0075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020510",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018832",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "ALLOPURINOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC],Xanthine Oxidase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "THIS IS NOT AN INNOCUOUS DRUG. IT IS NOT RECOMMENDED FOR THE TREATMENT OF ASYMPTOMATIC HYPERURICEMIA. Allopurinol reduces serum and urinary uric acid concentrations. Its use should be individualized for each patient and requires an understanding of its mode of action and pharmacokinetics (see CLINICAL PHARMACOLOGY, CONTRAINDICATIONS, WARNINGS and PRECAUTIONS). Allopurinol is indicated in: 1 the management of patients with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy)., 2 the management of patients with leukemia, lymphoma and malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels. Allopurinol treatment should be discontinued when the potential for overproduction of uric acid is no longer present., 3 the management of patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients. Therapy in such patients should be carefully assessed initially and reassessed periodically to determine in each case that treatment is beneficial and that the benefits outweigh the risks.",
"Description": "Allopurinol is known chemically as 1,5-Dihydro-4H-pyrazolo[3,4-d ]pyrimidin-4-one. It is a xanthine oxidase inhibitor which is administered orally. Its solubility in water at 37°C is 80 mg/dL and is greater in an alkaline solution. The structural formula is represented below. C5H4N4O M.W. 136.11. Allopurinol Tablets USP, 100 mg and 300 mg contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. Allopurinol Tablets USP, 300 mg also contain FD&C Yellow No. 6."
},
{
"NDCCode": "54868-0075-5",
"PackageDescription": "90 TABLET in 1 BOTTLE (54868-0075-5)",
"NDC11Code": "54868-0075-05",
"ProductNDC": "54868-0075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Allopurinol",
"NonProprietaryName": "Allopurinol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20020510",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018832",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "ALLOPURINOL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Xanthine Oxidase Inhibitor [EPC],Xanthine Oxidase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "THIS IS NOT AN INNOCUOUS DRUG. IT IS NOT RECOMMENDED FOR THE TREATMENT OF ASYMPTOMATIC HYPERURICEMIA. Allopurinol reduces serum and urinary uric acid concentrations. Its use should be individualized for each patient and requires an understanding of its mode of action and pharmacokinetics (see CLINICAL PHARMACOLOGY, CONTRAINDICATIONS, WARNINGS and PRECAUTIONS). Allopurinol is indicated in: 1 the management of patients with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy)., 2 the management of patients with leukemia, lymphoma and malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels. Allopurinol treatment should be discontinued when the potential for overproduction of uric acid is no longer present., 3 the management of patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients. Therapy in such patients should be carefully assessed initially and reassessed periodically to determine in each case that treatment is beneficial and that the benefits outweigh the risks.",
"Description": "Allopurinol is known chemically as 1,5-Dihydro-4H-pyrazolo[3,4-d ]pyrimidin-4-one. It is a xanthine oxidase inhibitor which is administered orally. Its solubility in water at 37°C is 80 mg/dL and is greater in an alkaline solution. The structural formula is represented below. C5H4N4O M.W. 136.11. Allopurinol Tablets USP, 100 mg and 300 mg contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. Allopurinol Tablets USP, 300 mg also contain FD&C Yellow No. 6."
},
{
"NDCCode": "0075-0624-30",
"PackageDescription": "10 CELLO PACK in 1 CARTON (0075-0624-30) / 1 SYRINGE in 1 CELLO PACK (0075-0624-01) / .3 mL in 1 SYRINGE",
"NDC11Code": "00075-0624-30",
"ProductNDC": "0075-0624",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovenox",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19930329",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020164",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "30",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19930329",
"SamplePackage": "N",
"IndicationAndUsage": "Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).",
"Description": "Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "0075-0624-31",
"PackageDescription": "10 SYRINGE in 1 CARTON (0075-0624-31) > .3 mL in 1 SYRINGE",
"NDC11Code": "00075-0624-31",
"ProductNDC": "0075-0624",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovenox",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20080312",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020164",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "30",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [Chemical/Ingredient],Low Molecular Weight Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-05-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0075-0626-03",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0075-0626-03) / 3 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00075-0626-03",
"ProductNDC": "0075-0626",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovenox",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19930329",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020164",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "300",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19930329",
"SamplePackage": "N",
"IndicationAndUsage": "Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).",
"Description": "Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "0075-0626-04",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0075-0626-04) > 3 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00075-0626-04",
"ProductNDC": "0075-0626",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovenox",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20080421",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020164",
"LabelerName": "sanofi-aventis U.S. LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "300",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [Chemical/Ingredient],Low Molecular Weight Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-05-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0075-8013-10",
"PackageDescription": "10 CELLO PACK in 1 CARTON (0075-8013-10) / 1 SYRINGE in 1 CELLO PACK / .3 mL in 1 SYRINGE (0075-8013-01) ",
"NDC11Code": "00075-8013-10",
"ProductNDC": "0075-8013",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovenox",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "19930329",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020164",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "30",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19930329",
"SamplePackage": "N",
"IndicationAndUsage": "Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).",
"Description": "Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "0075-8030-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0075-8030-01) / 3 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00075-8030-01",
"ProductNDC": "0075-8030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lovenox",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19930329",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020164",
"LabelerName": "Sanofi-Aventis U.S. LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "300",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19930329",
"SamplePackage": "N",
"IndicationAndUsage": "Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).",
"Description": "Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "0597-0075-41",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (0597-0075-41) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "00597-0075-41",
"ProductNDC": "0597-0075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Spiriva",
"ProprietaryNameSuffix": "Handihaler",
"NonProprietaryName": "Tiotropium Bromide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL; RESPIRATORY (INHALATION)",
"StartMarketingDate": "20051011",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021395",
"LabelerName": "Boehringer Ingelheim Pharmaceuticals, Inc.",
"SubstanceName": "TIOTROPIUM BROMIDE MONOHYDRATE",
"StrengthNumber": "18",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20051011",
"SamplePackage": "N",
"IndicationAndUsage": "SPIRIVA HANDIHALER (tiotropium bromide inhalation powder) is indicated for the long-term, once-daily, maintenance treatment of bronchospasm associated with chronic obstructive pulmonary disease (COPD), including chronic bronchitis and emphysema. SPIRIVA HANDIHALER is indicated to reduce exacerbations in COPD patients.",
"Description": "SPIRIVA HANDIHALER consists of SPIRIVA capsules and a HANDIHALER device. Each light green, hard gelatin SPIRIVA capsule contains a dry powder consisting of 18 mcg tiotropium (equivalent to 22.5 mcg tiotropium bromide monohydrate) blended with lactose monohydrate (which may contain milk proteins). The contents of SPIRIVA capsules are intended for oral inhalation only, and are intended for administration only with the HANDIHALER device. The active component of SPIRIVA HANDIHALER is tiotropium. The drug substance, tiotropium bromide monohydrate, is an anticholinergic with specificity for muscarinic receptors. It is chemically described as (1α, 2β, 4β, 5α, 7β)-7-[(Hydroxydi-2-thienylacetyl)oxy]-9,9-dimethyl-3-oxa-9-azoniatricyclo[3.3.1.02,4]nonane bromide monohydrate. It is a synthetic, non-chiral, quaternary ammonium compound. Tiotropium bromide is a white or yellowish white powder. It is sparingly soluble in water and soluble in methanol. The structural formula is. Tiotropium bromide (monohydrate) has a molecular mass of 490.4 and a molecular formula of C19H22NO4S2Br ∙ H2O. The HANDIHALER device is an inhalation device used to inhale the dry powder contained in the SPIRIVA capsule. The dry powder is delivered from the HANDIHALER device at flow rates as low as 20 L/min. Under standardized in vitro testing, the HANDIHALER device delivers a mean of 10.4 mcg tiotropium when tested at a flow rate of 39 L/min for 3.1 seconds (2 L total). In a study of 26 adult patients with COPD and severely compromised lung function [mean FEV1 1.02 L (range 0.45 to 2.24 L); 37.6% of predicted (range 16% to 65%)], the median peak inspiratory flow (PIF) through the HANDIHALER device was 30.0 L/min (range 20.4 to 45.6 L/min). The amount of drug delivered to the lungs will vary depending on patient factors such as inspiratory flow and peak inspiratory flow through the HANDIHALER device, which may vary from patient to patient, and may vary with the exposure time of the SPIRIVA capsule outside the blister pack."
},
{
"NDCCode": "15631-0075-3",
"PackageDescription": "750 PELLET in 1 PACKAGE (15631-0075-3)",
"NDC11Code": "15631-0075-03",
"ProductNDC": "15631-0075",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Baryta Muriatica",
"NonProprietaryName": "Baryta Muriatica",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150912",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "BARIUM CHLORIDE DIHYDRATE",
"StrengthNumber": "6",
"StrengthUnit": "[hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "37662-0075-3",
"PackageDescription": "4000 PELLET in 1 BOTTLE, GLASS (37662-0075-3) ",
"NDC11Code": "37662-0075-03",
"ProductNDC": "37662-0075",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Calcarea Fluorica",
"NonProprietaryName": "Calcarea Fluorica",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220518",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "CALCIUM FLUORIDE",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2022-05-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220518",
"SamplePackage": "N"
},
{
"NDCCode": "49288-0075-3",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (49288-0075-3)",
"NDC11Code": "49288-0075-03",
"ProductNDC": "49288-0075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bahia Grass",
"NonProprietaryName": "Bahia Grass",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19740323",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102223",
"LabelerName": "Antigen Laboratories, Inc.",
"SubstanceName": "PASPALUM NOTATUM POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label."
},
{
"NDCCode": "54569-0075-3",
"PackageDescription": "28 TABLET in 1 BOTTLE, PLASTIC (54569-0075-3)",
"NDC11Code": "54569-0075-03",
"ProductNDC": "54569-0075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070125",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078060",
"LabelerName": "A-S Medication Solutions LLC",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "800; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "60492-0075-3",
"PackageDescription": "20 mL in 1 VIAL, GLASS (60492-0075-3) ",
"NDC11Code": "60492-0075-03",
"ProductNDC": "60492-0075",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Bat",
"NonProprietaryName": "Botulism Antitoxin Heptavalent",
"DosageFormName": "LIQUID",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20130301",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125462",
"LabelerName": "Emergent BIoSolutions Canada Inc.",
"SubstanceName": "EQUINE BOTULINUM NEUROTOXIN A IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN B IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN C IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN D IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN E IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN F IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN G IMMUNE FAB2",
"StrengthNumber": "4500; 3300; 3000; 600; 5100; 3000; 600",
"StrengthUnit": "[iU]/10mL; [iU]/10mL; [iU]/10mL; [iU]/10mL; [iU]/10mL; [iU]/10mL; [iU]/10mL",
"Status": "Deprecated",
"LastUpdate": "2025-06-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20130301",
"SamplePackage": "N",
"IndicationAndUsage": "BAT [Botulism Antitoxin Heptavalent (A, B, C, D, E, F, G) – (Equine)] is a mixture of immune globulin fragments indicated for the treatment of symptomatic botulism following documented or suspected exposure to botulinum neurotoxin serotypes A, B, C, D, E, F, or G in adults and pediatric patients. The effectiveness of BAT is based on efficacy studies conducted in animal models of botulism.",
"Description": "BAT [Botulism Antitoxin Heptavalent (A, B, C, D, E, F, G) – (Equine)] is a sterile solution of F(ab’)2 and F(ab') 2-related antibody fragments prepared from plasma obtained from horses that have been immunized with a specific serotype of botulinum toxoid and toxin. To obtain the final heptavalent product, the seven antitoxin serotypes are blended. BAT is supplied in either a 20 or 50 milliliter vial size, with a fill volume ranging from 10 to 26 milliliters per vial. BAT is administered intravenously. The manufacturing process for each antitoxin type includes cation-exchange chromatography to purify the immune globulin fraction, digestion with pepsin to produce F(ab')2 plus F(ab') 2-related immune globulin fragments, anion exchange chromatography to remove the pepsin as well as other impurities and filtration. In addition, the manufacturing process includes two viral inactivation/removal steps; solvent/detergent (S/D) treatment and virus filtration [Table 4]. The S/D treatment step is effective at inactivating known lipid-enveloped viruses such as equine encephalitis, equine arteritis, West Nile virus, equine infectious anemia, equine herpes virus, rabies, and equine influenza. The BAT manufacturing process also includes a robust filtration step that is effective in reducing the levels of some lipid-enveloped viruses (listed above) as well as non-enveloped viruses including equine rhinovirus, equine adenoviruses and adeno-associated viruses, and equine parvovirus. BAT is formulated with 10% maltose and 0.03% polysorbate 80. The formulated bulk material contains approximately 3-7 g% (30-70 milligrams/milliliter) protein. The product potency is expressed in units based on the mouse neutralization assay (MNA). Each unit of BAT is designed to neutralize 10,000 mouse intraperitoneal lethal dose 50% units (MIPLD50) of botulinum neurotoxin for serotype A, B, C, D, F, and G and 1,000 MIPLD50 of serotype E."
},
{
"NDCCode": "65085-0075-3",
"PackageDescription": "15 kg in 1 DRUM (65085-0075-3) ",
"NDC11Code": "65085-0075-03",
"ProductNDC": "65085-0075",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Mecamylamine Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20220803",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Piramal Pharma Limited",
"SubstanceName": "MECAMYLAMINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2022-08-05",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "03-AUG-22"
},
{
"NDCCode": "70677-0075-3",
"PackageDescription": "1 BOTTLE in 1 CARTON (70677-0075-3) > 90 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "70677-0075-03",
"ProductNDC": "70677-0075",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunmark All Day Allergy",
"NonProprietaryName": "Cetirizine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190816",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078336",
"LabelerName": "Strategic Sourcing Services LLC",
"SubstanceName": "CETIRIZINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20190821",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat."
},
{
"NDCCode": "71335-0075-3",
"PackageDescription": "90 TABLET in 1 BOTTLE (71335-0075-3) ",
"NDC11Code": "71335-0075-03",
"ProductNDC": "71335-0075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lisinopril",
"NonProprietaryName": "Lisinopril",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20111101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076164",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LISINOPRIL",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220315",
"SamplePackage": "N",
"IndicationAndUsage": "Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).",
"Description": "Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch."
},
{
"NDCCode": "78182-0075-3",
"PackageDescription": "375 g in 1 PACKAGE (78182-0075-3) ",
"NDC11Code": "78182-0075-03",
"ProductNDC": "78182-0075",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vida",
"NonProprietaryName": "Virucidal Disinfectant Rtu",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200527",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Isochem Australia PTY LTD",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200527",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available."
},
{
"NDCCode": "79481-0075-3",
"PackageDescription": "3 BOTTLE in 1 CARTON (79481-0075-3) / 14 TABLET, DELAYED RELEASE in 1 BOTTLE",
"NDC11Code": "79481-0075-03",
"ProductNDC": "79481-0075",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "24 Hr Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220525",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022032",
"LabelerName": "Meijer, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-01-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220525",
"SamplePackage": "N",
"IndicationAndUsage": "treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect."
},
{
"NDCCode": "80425-0075-3",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (80425-0075-3) ",
"NDC11Code": "80425-0075-03",
"ProductNDC": "80425-0075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hcl",
"NonProprietaryName": "Ondansetron Hcl",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078539",
"LabelerName": "Advanced Rx of Tennessee, LLC",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20070731",
"SamplePackage": "N",
"IndicationAndUsage": "1 INDICATIONS AND USAGE. Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2 initial and repeat courses of moderately emetogenic cancer chemotherapy radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.",
"Description": "The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6."
},
{
"NDCCode": "54868-0018-3",
"PackageDescription": "20 TABLET in 1 BOTTLE (54868-0018-3)",
"NDC11Code": "54868-0018-03",
"ProductNDC": "54868-0018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erythromycin Ethylsuccinate",
"NonProprietaryName": "Erythromycin Ethylsuccinate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19960227",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA061904",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "ERYTHROMYCIN ETHYLSUCCINATE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Sebaceous Gland Activity [PE],Macrolide [EPC],Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin ethylsuccinate tablets and other antibacterial drugs, erythromycin ethylsuccinate tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin ethylsuccinate tablets are indicated in the treatment of infections caused by susceptible strains of the designated organisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes, Streptococcus pneumoniae , or Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information.). Lower-respiratory tract infections of mild to moderate severity caused by Streptococcus pneumoniae or Streptococcus pyogenes . Listeriosis caused by Listeria monocytogenes. Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Respiratory tract infections due to Mycoplasma pneumoniae . Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Diphtheria: Infections due to Corynebacterium diphtheriae , as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: As an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Syphilis Caused by Treponema Pallidum : Erythromycin is an alternate choice of treatment for primary syphilis in penicillin-allergic patients. In primary syphilis, spinal fluid examinations should be done before treatment and as part of follow-up after therapy. Erythromycins are indicated for the treatment of the following infections caused by Chlamydia trachomatis: Conjunctivitis of the newborn, pneumonia of infancy, and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical, or rectal infections in adults due to Chlamydia trachomatis. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease. Penicillin is considered by the American Heart Association to be the drug of choice in the prevention of initial attacks of rheumatic fever (treatment of Streptococcus pyogenes infections of the upper respiratory tract, e.g., tonsillitis or pharyngitis). Erythromycin is indicated for the treatment of penicillin-allergic patients.3 The therapeutic dose should be administered for 10 days. Penicillin or sulfonamides are considered by the American Heart Association to be the drugs of choice in the prevention of recurrent attacks of rheumatic fever. In patients who are allergic to penicillin and sulfonamides, oral erythromycin is recommended by the American Heart Association in the long-term prophylaxis of streptococcal pharyngitis (for the prevention of recurrent attacks of rheumatic fever).3.",
"Description": "Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. The base, the stearate salt, and the esters are poorly soluble in water. Erythromycin ethylsuccinate is an ester of erythromycin suitable for oral administration. Erythromycin ethylsuccinate is known chemically as erythromycin 2'-(ethylsuccinate). Erythromycin ethylsuccinate tablets for oral administration are intended primarily for adults or older children. Each tablet contains erythromycin ethylsuccinate equivalent to 400 mg of erythromycin activity. The molecular formula is C43H75NO16 and the molecular weight is 862.06. The structural formula is. Confectioner's sugar (contains corn starch), corn starch, FD&C Red No. 40, magnesium stearate, polacrilin potassium and sodium citrate."
},
{
"NDCCode": "54868-0021-3",
"PackageDescription": "120 TABLET in 1 BOTTLE, PLASTIC (54868-0021-3)",
"NDC11Code": "54868-0021-03",
"ProductNDC": "54868-0021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19950811",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090624",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "800; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "54868-0023-3",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (54868-0023-3)",
"NDC11Code": "54868-0023-03",
"ProductNDC": "54868-0023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19930611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062031",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2014-02-19"
},
{
"NDCCode": "54868-0024-3",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (54868-0024-3)",
"NDC11Code": "54868-0024-03",
"ProductNDC": "54868-0024",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19880301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide."
},
{
"NDCCode": "54868-0025-3",
"PackageDescription": "40 CAPSULE in 1 BOTTLE (54868-0025-3)",
"NDC11Code": "54868-0025-03",
"ProductNDC": "54868-0025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19961009",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060704",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide."
},
{
"NDCCode": "54868-0032-3",
"PackageDescription": "20 TABLET in 1 BOTTLE, PLASTIC (54868-0032-3)",
"NDC11Code": "54868-0032-03",
"ProductNDC": "54868-0032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diphenoxylate Hydrochloride And Atropine Sulfate",
"NonProprietaryName": "Diphenoxylate Hydrochloride And Atropine Sulfate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19950127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085762",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "DIPHENOXYLATE HYDROCHLORIDE; ATROPINE SULFATE",
"StrengthNumber": "2.5; .025",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Antidiarrheal [EPC],Anticholinergic [EPC],Cholinergic Antagonists [MoA],Cholinergic Muscarinic Antagonist [EPC],Cholinergic Muscarinic Antagonists [MoA]",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Diphenoxylate hydrochloride and atropine sulfate tablets are effective as adjunctive therapy in the management of diarrhea.",
"Description": "Each tablet for oral administration contains. diphenoxylatehydrochloride, USP 2.5 mg(Warning – May be habit forming). atropinesulfate, USP 0.025 mg. Diphenoxylate hydrochloride, an antidiarrheal, is ethyl 1-(3-cyano-3, 3-diphenylpropyl)-4-phenyl-isonipecotate monohydrochloride and has the following structure. Atropine sulfate, an anticholinergic, is endo-(±)-alpha-(hydroxymethyl) benzeneacetic acid 8-methyl-8-azabicylo[3.2.1] oct-3-yl ester sulfate (2:1)] (salt) monohydrate and has the following structure. A subtherapeutic amount of atropine sulfate is present to discourage deliberate overdosage. Each tablet for oral administration contains the following inactive ingredients: colloidal silicon dioxide, microcrystalline cellulose, pregelatinized starch and stearic acid."
},
{
"NDCCode": "54868-0033-3",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (54868-0033-3)",
"NDC11Code": "54868-0033-03",
"ProductNDC": "54868-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dicyclomine Hydrochloride",
"NonProprietaryName": "Dicyclomine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19951026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA084285",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "DICYCLOMINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Dicyclomine hydrochloride tablets and capsules are indicated for the treatment of functional bowel/ irritable bowel syndrome.",
"Description": "Dicyclomine hydrochloride is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following forms. 1. Dicyclomine Hydrochloride Tablets USP, for oral administration, contain 20 mg dicyclomine hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: acacia, pregelatinized starch, anhydrous lactose, compressible sugar, dicalcium phosphate, colloidal silicon dioxide, magnesium stearate, stearic acid, and FD & C Blue #1 Aluminum Lake. 2. Dicyclomine Hydrochloride Capsules USP, for oral administration, contain 10 mg of dicyclomine hydrochloride, USP. In addition, each capsule contains the following inactive ingredients: lactose monohydrate, calcium sulfate, magnesium stearate; and the capsules shells contain: gelatin, FD&C Blue # 1, and FD&C Red # 3. Chemically, dicyclomine hydrochloride is 2-(Diethylamino)ethyl [bicyclohexyl]-1-carboxylate hydrochloride with the structural formula. Dicyclomine hydrochloride occurs as a fine, white, crystalline, practically odorless powder with a bitter taste. It is soluble in water, freely soluble in alcohol and chloroform, and very slightly soluble in ether."
},
{
"NDCCode": "54868-0034-3",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (54868-0034-3)",
"NDC11Code": "54868-0034-03",
"ProductNDC": "54868-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoclopramide",
"NonProprietaryName": "Metoclopramide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20030501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078807",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "METOCLOPRAMIDE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "The use of metoclopramide tablets is recommended for adults only. Therapy should not exceed 12 weeks in duration. Metoclopramide tablets are indicated as short-term (4 to 12 weeks) therapy for adults with symptomatic, documented gastroesophageal reflux who fail to respond to conventional therapy. The principal effect of metoclopramide is on symptoms of postprandial and daytime heartburn with less observed effect on nocturnal symptoms. If symptoms are confined to particular situations, such as following the evening meal, use of metoclopramide as single doses prior to the provocative situation should be considered, rather than using the drug throughout the day. Healing of esophageal ulcers and erosions has been endoscopically demonstrated at the end of a 12-week trial using doses of 15 mg q.i.d. As there is no documented correlation between symptoms and healing of esophageal lesions, patients with documented lesions should be monitored endoscopically. Metoclopramide tablets, are indicated for the relief of symptoms associated with acute and recurrent diabetic gastric stasis. The usual manifestations of delayed gastric emptying (e.g., nausea, vomiting, heartburn, persistent fullness after meals, and anorexia) appear to respond to metoclopramide tablets within different time intervals. Significant relief of nausea occurs early and continues to improve over a three-week period. Relief of vomiting and anorexia may precede the relief of abdominal fullness by one week or more.",
"Description": "For oral administration, Metoclopramide tablets, USP 10 mg are white to off white, capsule shaped, biconvex tablets with \"RF11\" embossed on one side and score line on the other side. Each tablet contains. 10 mg of metoclopramide base as metoclopramide hydrochloride USP."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>54868-0075-3</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (54868-0075-3)</PackageDescription>
<NDC11Code>54868-0075-03</NDC11Code>
<ProductNDC>54868-0075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020510</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018832</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>ALLOPURINOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC],Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>THIS IS NOT AN INNOCUOUS DRUG. IT IS NOT RECOMMENDED FOR THE TREATMENT OF ASYMPTOMATIC HYPERURICEMIA. Allopurinol reduces serum and urinary uric acid concentrations. Its use should be individualized for each patient and requires an understanding of its mode of action and pharmacokinetics (see CLINICAL PHARMACOLOGY, CONTRAINDICATIONS, WARNINGS and PRECAUTIONS). Allopurinol is indicated in: 1 the management of patients with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy)., 2 the management of patients with leukemia, lymphoma and malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels. Allopurinol treatment should be discontinued when the potential for overproduction of uric acid is no longer present., 3 the management of patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients. Therapy in such patients should be carefully assessed initially and reassessed periodically to determine in each case that treatment is beneficial and that the benefits outweigh the risks.</IndicationAndUsage>
<Description>Allopurinol is known chemically as 1,5-Dihydro-4H-pyrazolo[3,4-d ]pyrimidin-4-one. It is a xanthine oxidase inhibitor which is administered orally. Its solubility in water at 37°C is 80 mg/dL and is greater in an alkaline solution. The structural formula is represented below. C5H4N4O M.W. 136.11. Allopurinol Tablets USP, 100 mg and 300 mg contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. Allopurinol Tablets USP, 300 mg also contain FD&C Yellow No. 6.</Description>
</NDC>
<NDC>
<NDCCode>54868-0075-0</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (54868-0075-0)</PackageDescription>
<NDC11Code>54868-0075-00</NDC11Code>
<ProductNDC>54868-0075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020510</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018832</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>ALLOPURINOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC],Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>THIS IS NOT AN INNOCUOUS DRUG. IT IS NOT RECOMMENDED FOR THE TREATMENT OF ASYMPTOMATIC HYPERURICEMIA. Allopurinol reduces serum and urinary uric acid concentrations. Its use should be individualized for each patient and requires an understanding of its mode of action and pharmacokinetics (see CLINICAL PHARMACOLOGY, CONTRAINDICATIONS, WARNINGS and PRECAUTIONS). Allopurinol is indicated in: 1 the management of patients with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy)., 2 the management of patients with leukemia, lymphoma and malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels. Allopurinol treatment should be discontinued when the potential for overproduction of uric acid is no longer present., 3 the management of patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients. Therapy in such patients should be carefully assessed initially and reassessed periodically to determine in each case that treatment is beneficial and that the benefits outweigh the risks.</IndicationAndUsage>
<Description>Allopurinol is known chemically as 1,5-Dihydro-4H-pyrazolo[3,4-d ]pyrimidin-4-one. It is a xanthine oxidase inhibitor which is administered orally. Its solubility in water at 37°C is 80 mg/dL and is greater in an alkaline solution. The structural formula is represented below. C5H4N4O M.W. 136.11. Allopurinol Tablets USP, 100 mg and 300 mg contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. Allopurinol Tablets USP, 300 mg also contain FD&C Yellow No. 6.</Description>
</NDC>
<NDC>
<NDCCode>54868-0075-4</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (54868-0075-4)</PackageDescription>
<NDC11Code>54868-0075-04</NDC11Code>
<ProductNDC>54868-0075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020510</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018832</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>ALLOPURINOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC],Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>THIS IS NOT AN INNOCUOUS DRUG. IT IS NOT RECOMMENDED FOR THE TREATMENT OF ASYMPTOMATIC HYPERURICEMIA. Allopurinol reduces serum and urinary uric acid concentrations. Its use should be individualized for each patient and requires an understanding of its mode of action and pharmacokinetics (see CLINICAL PHARMACOLOGY, CONTRAINDICATIONS, WARNINGS and PRECAUTIONS). Allopurinol is indicated in: 1 the management of patients with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy)., 2 the management of patients with leukemia, lymphoma and malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels. Allopurinol treatment should be discontinued when the potential for overproduction of uric acid is no longer present., 3 the management of patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients. Therapy in such patients should be carefully assessed initially and reassessed periodically to determine in each case that treatment is beneficial and that the benefits outweigh the risks.</IndicationAndUsage>
<Description>Allopurinol is known chemically as 1,5-Dihydro-4H-pyrazolo[3,4-d ]pyrimidin-4-one. It is a xanthine oxidase inhibitor which is administered orally. Its solubility in water at 37°C is 80 mg/dL and is greater in an alkaline solution. The structural formula is represented below. C5H4N4O M.W. 136.11. Allopurinol Tablets USP, 100 mg and 300 mg contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. Allopurinol Tablets USP, 300 mg also contain FD&C Yellow No. 6.</Description>
</NDC>
<NDC>
<NDCCode>54868-0075-5</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (54868-0075-5)</PackageDescription>
<NDC11Code>54868-0075-05</NDC11Code>
<ProductNDC>54868-0075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Allopurinol</ProprietaryName>
<NonProprietaryName>Allopurinol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020510</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018832</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>ALLOPURINOL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Xanthine Oxidase Inhibitor [EPC],Xanthine Oxidase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>THIS IS NOT AN INNOCUOUS DRUG. IT IS NOT RECOMMENDED FOR THE TREATMENT OF ASYMPTOMATIC HYPERURICEMIA. Allopurinol reduces serum and urinary uric acid concentrations. Its use should be individualized for each patient and requires an understanding of its mode of action and pharmacokinetics (see CLINICAL PHARMACOLOGY, CONTRAINDICATIONS, WARNINGS and PRECAUTIONS). Allopurinol is indicated in: 1 the management of patients with signs and symptoms of primary or secondary gout (acute attacks, tophi, joint destruction, uric acid lithiasis, and/or nephropathy)., 2 the management of patients with leukemia, lymphoma and malignancies who are receiving cancer therapy which causes elevations of serum and urinary uric acid levels. Allopurinol treatment should be discontinued when the potential for overproduction of uric acid is no longer present., 3 the management of patients with recurrent calcium oxalate calculi whose daily uric acid excretion exceeds 800 mg/day in male patients and 750 mg/day in female patients. Therapy in such patients should be carefully assessed initially and reassessed periodically to determine in each case that treatment is beneficial and that the benefits outweigh the risks.</IndicationAndUsage>
<Description>Allopurinol is known chemically as 1,5-Dihydro-4H-pyrazolo[3,4-d ]pyrimidin-4-one. It is a xanthine oxidase inhibitor which is administered orally. Its solubility in water at 37°C is 80 mg/dL and is greater in an alkaline solution. The structural formula is represented below. C5H4N4O M.W. 136.11. Allopurinol Tablets USP, 100 mg and 300 mg contain the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch and sodium lauryl sulfate. Allopurinol Tablets USP, 300 mg also contain FD&C Yellow No. 6.</Description>
</NDC>
<NDC>
<NDCCode>0075-0624-30</NDCCode>
<PackageDescription>10 CELLO PACK in 1 CARTON (0075-0624-30) / 1 SYRINGE in 1 CELLO PACK (0075-0624-01) / .3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00075-0624-30</NDC11Code>
<ProductNDC>0075-0624</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovenox</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19930329</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020164</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19930329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
<Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>0075-0624-31</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (0075-0624-31) > .3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00075-0624-31</NDC11Code>
<ProductNDC>0075-0624</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovenox</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20080312</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020164</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [Chemical/Ingredient],Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-05-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0075-0626-03</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0075-0626-03) / 3 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00075-0626-03</NDC11Code>
<ProductNDC>0075-0626</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovenox</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19930329</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020164</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19930329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
<Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>0075-0626-04</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0075-0626-04) > 3 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00075-0626-04</NDC11Code>
<ProductNDC>0075-0626</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovenox</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20080421</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020164</ApplicationNumber>
<LabelerName>sanofi-aventis U.S. LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [Chemical/Ingredient],Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-05-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0075-8013-10</NDCCode>
<PackageDescription>10 CELLO PACK in 1 CARTON (0075-8013-10) / 1 SYRINGE in 1 CELLO PACK / .3 mL in 1 SYRINGE (0075-8013-01) </PackageDescription>
<NDC11Code>00075-8013-10</NDC11Code>
<ProductNDC>0075-8013</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovenox</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>19930329</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020164</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19930329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
<Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>0075-8030-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0075-8030-01) / 3 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00075-8030-01</NDC11Code>
<ProductNDC>0075-8030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lovenox</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19930329</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020164</ApplicationNumber>
<LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19930329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lovenox is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
<Description>Lovenox is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. R1 = H or SO3Na and R2 = SO3Na or COCH3. Lovenox 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Lovenox 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The Lovenox prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>0597-0075-41</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (0597-0075-41) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00597-0075-41</NDC11Code>
<ProductNDC>0597-0075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Spiriva</ProprietaryName>
<ProprietaryNameSuffix>Handihaler</ProprietaryNameSuffix>
<NonProprietaryName>Tiotropium Bromide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL; RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20051011</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021395</ApplicationNumber>
<LabelerName>Boehringer Ingelheim Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TIOTROPIUM BROMIDE MONOHYDRATE</SubstanceName>
<StrengthNumber>18</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051011</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SPIRIVA HANDIHALER (tiotropium bromide inhalation powder) is indicated for the long-term, once-daily, maintenance treatment of bronchospasm associated with chronic obstructive pulmonary disease (COPD), including chronic bronchitis and emphysema. SPIRIVA HANDIHALER is indicated to reduce exacerbations in COPD patients.</IndicationAndUsage>
<Description>SPIRIVA HANDIHALER consists of SPIRIVA capsules and a HANDIHALER device. Each light green, hard gelatin SPIRIVA capsule contains a dry powder consisting of 18 mcg tiotropium (equivalent to 22.5 mcg tiotropium bromide monohydrate) blended with lactose monohydrate (which may contain milk proteins). The contents of SPIRIVA capsules are intended for oral inhalation only, and are intended for administration only with the HANDIHALER device. The active component of SPIRIVA HANDIHALER is tiotropium. The drug substance, tiotropium bromide monohydrate, is an anticholinergic with specificity for muscarinic receptors. It is chemically described as (1α, 2β, 4β, 5α, 7β)-7-[(Hydroxydi-2-thienylacetyl)oxy]-9,9-dimethyl-3-oxa-9-azoniatricyclo[3.3.1.02,4]nonane bromide monohydrate. It is a synthetic, non-chiral, quaternary ammonium compound. Tiotropium bromide is a white or yellowish white powder. It is sparingly soluble in water and soluble in methanol. The structural formula is. Tiotropium bromide (monohydrate) has a molecular mass of 490.4 and a molecular formula of C19H22NO4S2Br ∙ H2O. The HANDIHALER device is an inhalation device used to inhale the dry powder contained in the SPIRIVA capsule. The dry powder is delivered from the HANDIHALER device at flow rates as low as 20 L/min. Under standardized in vitro testing, the HANDIHALER device delivers a mean of 10.4 mcg tiotropium when tested at a flow rate of 39 L/min for 3.1 seconds (2 L total). In a study of 26 adult patients with COPD and severely compromised lung function [mean FEV1 1.02 L (range 0.45 to 2.24 L); 37.6% of predicted (range 16% to 65%)], the median peak inspiratory flow (PIF) through the HANDIHALER device was 30.0 L/min (range 20.4 to 45.6 L/min). The amount of drug delivered to the lungs will vary depending on patient factors such as inspiratory flow and peak inspiratory flow through the HANDIHALER device, which may vary from patient to patient, and may vary with the exposure time of the SPIRIVA capsule outside the blister pack.</Description>
</NDC>
<NDC>
<NDCCode>15631-0075-3</NDCCode>
<PackageDescription>750 PELLET in 1 PACKAGE (15631-0075-3)</PackageDescription>
<NDC11Code>15631-0075-03</NDC11Code>
<ProductNDC>15631-0075</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Baryta Muriatica</ProprietaryName>
<NonProprietaryName>Baryta Muriatica</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150912</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>BARIUM CHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37662-0075-3</NDCCode>
<PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (37662-0075-3) </PackageDescription>
<NDC11Code>37662-0075-03</NDC11Code>
<ProductNDC>37662-0075</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Calcarea Fluorica</ProprietaryName>
<NonProprietaryName>Calcarea Fluorica</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220518</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>CALCIUM FLUORIDE</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-05-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220518</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49288-0075-3</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (49288-0075-3)</PackageDescription>
<NDC11Code>49288-0075-03</NDC11Code>
<ProductNDC>49288-0075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bahia Grass</ProprietaryName>
<NonProprietaryName>Bahia Grass</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19740323</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102223</ApplicationNumber>
<LabelerName>Antigen Laboratories, Inc.</LabelerName>
<SubstanceName>PASPALUM NOTATUM POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extract is used for diagnostic testing and for the treatment (immunotherapy) of patients whose histories indicate that upon natural exposure to the allergen, they experience allergic symptoms. Confirmation is determined by skin testing. Diagnostic use of allergenic extracts usually begins with direct skin testing. This product is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Antigen Laboratories’ allergenic extracts are manufactured from source material listed on the vial label. Lower concentrations (e.g. 1:50, 1:33, etc.) may be prepared either by dilution from a more concentrated stock or by direct extraction. The extract is a sterile solution containing extractables of source materials obtained from biological collecting and/or processing firms and Antigen Laboratories. All source materials are inspected by Antigen Laboratories’ technical personnel in accordance with 21 CFR 680.1 (b) (1). The route of administration for immunotherapy is subcutaneous. The routes of administration for diagnostic purposes are intradermal or prick-puncture of the skin. FOR ALLERGENIC EXTRACTS CONTAINING 50% V/V GLYCERINE AS PRESERVATIVE AND STABILIZER. INACTIVE INGREDIENTS. Sodium chloride…………………………………………………………….0.95%. Sodium bicarbonate………………………………………………………..0.24%. Glycerine…………………………………………………………………50% (v/v). Water for Injection…………………………………………………q.s. to volume. Active allergens are described by common and scientific name on the stock concentrate container label or on last page of this circular. Food allergenic extracts may be manufactured on a weight/volume (w/v) or volume/volume (v/v) basis. Food extracts made from dried raw material are extracted at 2-10% (1:50-1:10 w/v ratio) in extracting fluid containing 50% glycerine. Slurries of juicy fruits or vegetables (prepared with a minimum amount of water for injection) are combined with an equal volume of glycerine for a ration of 1:1 volume/volume (v/v). Sodium chloride and sodium bicarbonate are added to the slurry and glycerine mixture. Fresh egg white extract is prepared by adding one part raw egg white to nine parts of extracting fluid (1:9 v/v). Antigen E is considered the most important allergen of Short Ragweed pollen and is used for the standardization of Short Ragweed allergenic extracts. Stock mixtures containing Short Ragweed are analyzed for Antigen E content by radial immunodiffusion using Center for Biologics Evaluation and Research (CBER) references and anti-serum. Antigen E content expressed as units of Antigen E per milliliter (U/ml) is printed on container label.</Description>
</NDC>
<NDC>
<NDCCode>54569-0075-3</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE, PLASTIC (54569-0075-3)</PackageDescription>
<NDC11Code>54569-0075-03</NDC11Code>
<ProductNDC>54569-0075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070125</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078060</ApplicationNumber>
<LabelerName>A-S Medication Solutions LLC</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>800; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>60492-0075-3</NDCCode>
<PackageDescription>20 mL in 1 VIAL, GLASS (60492-0075-3) </PackageDescription>
<NDC11Code>60492-0075-03</NDC11Code>
<ProductNDC>60492-0075</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Bat</ProprietaryName>
<NonProprietaryName>Botulism Antitoxin Heptavalent</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20130301</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125462</ApplicationNumber>
<LabelerName>Emergent BIoSolutions Canada Inc.</LabelerName>
<SubstanceName>EQUINE BOTULINUM NEUROTOXIN A IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN B IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN C IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN D IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN E IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN F IMMUNE FAB2; EQUINE BOTULINUM NEUROTOXIN G IMMUNE FAB2</SubstanceName>
<StrengthNumber>4500; 3300; 3000; 600; 5100; 3000; 600</StrengthNumber>
<StrengthUnit>[iU]/10mL; [iU]/10mL; [iU]/10mL; [iU]/10mL; [iU]/10mL; [iU]/10mL; [iU]/10mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-06-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BAT [Botulism Antitoxin Heptavalent (A, B, C, D, E, F, G) – (Equine)] is a mixture of immune globulin fragments indicated for the treatment of symptomatic botulism following documented or suspected exposure to botulinum neurotoxin serotypes A, B, C, D, E, F, or G in adults and pediatric patients. The effectiveness of BAT is based on efficacy studies conducted in animal models of botulism.</IndicationAndUsage>
<Description>BAT [Botulism Antitoxin Heptavalent (A, B, C, D, E, F, G) – (Equine)] is a sterile solution of F(ab’)2 and F(ab') 2-related antibody fragments prepared from plasma obtained from horses that have been immunized with a specific serotype of botulinum toxoid and toxin. To obtain the final heptavalent product, the seven antitoxin serotypes are blended. BAT is supplied in either a 20 or 50 milliliter vial size, with a fill volume ranging from 10 to 26 milliliters per vial. BAT is administered intravenously. The manufacturing process for each antitoxin type includes cation-exchange chromatography to purify the immune globulin fraction, digestion with pepsin to produce F(ab')2 plus F(ab') 2-related immune globulin fragments, anion exchange chromatography to remove the pepsin as well as other impurities and filtration. In addition, the manufacturing process includes two viral inactivation/removal steps; solvent/detergent (S/D) treatment and virus filtration [Table 4]. The S/D treatment step is effective at inactivating known lipid-enveloped viruses such as equine encephalitis, equine arteritis, West Nile virus, equine infectious anemia, equine herpes virus, rabies, and equine influenza. The BAT manufacturing process also includes a robust filtration step that is effective in reducing the levels of some lipid-enveloped viruses (listed above) as well as non-enveloped viruses including equine rhinovirus, equine adenoviruses and adeno-associated viruses, and equine parvovirus. BAT is formulated with 10% maltose and 0.03% polysorbate 80. The formulated bulk material contains approximately 3-7 g% (30-70 milligrams/milliliter) protein. The product potency is expressed in units based on the mouse neutralization assay (MNA). Each unit of BAT is designed to neutralize 10,000 mouse intraperitoneal lethal dose 50% units (MIPLD50) of botulinum neurotoxin for serotype A, B, C, D, F, and G and 1,000 MIPLD50 of serotype E.</Description>
</NDC>
<NDC>
<NDCCode>65085-0075-3</NDCCode>
<PackageDescription>15 kg in 1 DRUM (65085-0075-3) </PackageDescription>
<NDC11Code>65085-0075-03</NDC11Code>
<ProductNDC>65085-0075</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Mecamylamine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20220803</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Piramal Pharma Limited</LabelerName>
<SubstanceName>MECAMYLAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2022-08-05</LastUpdate>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>03-AUG-22</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>70677-0075-3</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (70677-0075-3) > 90 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>70677-0075-03</NDC11Code>
<ProductNDC>70677-0075</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunmark All Day Allergy</ProprietaryName>
<NonProprietaryName>Cetirizine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190816</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078336</ApplicationNumber>
<LabelerName>Strategic Sourcing Services LLC</LabelerName>
<SubstanceName>CETIRIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190821</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 sneezing, 3 itchy, watery eyes, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71335-0075-3</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71335-0075-3) </PackageDescription>
<NDC11Code>71335-0075-03</NDC11Code>
<ProductNDC>71335-0075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lisinopril</ProprietaryName>
<NonProprietaryName>Lisinopril</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20111101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076164</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LISINOPRIL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220315</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lisinopril is an angiotensin converting enzyme (ACE) inhibitor indicated for: 1 Treatment of hypertension in adults and pediatric patients 6 years of age and older (1.1), 2 Adjunct therapy for heart failure (1.2), 3 Treatment of Acute Myocardial Infarction (1.3).</IndicationAndUsage>
<Description>Lisinopril is an oral long-acting angiotensin converting enzyme (ACE) inhibitor. Lisinopril, a synthetic peptide derivative, is chemically described as (S)-1-[N2-(1-carboxy-3-phenylpropyl)-L-lysyl]-L-proline dihydrate. Its empirical formula is C21H31N3O52H2O and its structural formula is. Lisinopril is a white to off-white, crystalline powder, with a molecular weight of 441.53. It is soluble in water and sparingly soluble in methanol and practically insoluble in ethanol. Lisinopril tablets, USP, are supplied as 2.5 mg, 5 mg, 10 mg, 20 mg, 30 mg and 40 mg tablets for oral administration. Inactive Ingredients. 2.5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate and magnesium stearate. 5 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and yellow ferric oxide. 10 mg tablets – Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, sodium starch glycolate, magnesium stearate and red ferric oxide. 20 and 30 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and red ferric oxide. 40 mg tablets - Mannitol, dibasic calcium phosphate, pregelatinized starch*, corn starch, colloidal silicon dioxide, magnesium stearate and yellow ferric oxide. *: Pregelatinized starch is a physically modified corn (maize) starch.</Description>
</NDC>
<NDC>
<NDCCode>78182-0075-3</NDCCode>
<PackageDescription>375 g in 1 PACKAGE (78182-0075-3) </PackageDescription>
<NDC11Code>78182-0075-03</NDC11Code>
<ProductNDC>78182-0075</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vida</ProprietaryName>
<NonProprietaryName>Virucidal Disinfectant Rtu</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200527</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Isochem Australia PTY LTD</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200527</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>79481-0075-3</NDCCode>
<PackageDescription>3 BOTTLE in 1 CARTON (79481-0075-3) / 14 TABLET, DELAYED RELEASE in 1 BOTTLE</PackageDescription>
<NDC11Code>79481-0075-03</NDC11Code>
<ProductNDC>79481-0075</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>24 Hr Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220525</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022032</ApplicationNumber>
<LabelerName>Meijer, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220525</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>80425-0075-3</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (80425-0075-3) </PackageDescription>
<NDC11Code>80425-0075-03</NDC11Code>
<ProductNDC>80425-0075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hcl</ProprietaryName>
<NonProprietaryName>Ondansetron Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078539</ApplicationNumber>
<LabelerName>Advanced Rx of Tennessee, LLC</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>1 INDICATIONS AND USAGE. Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2 initial and repeat courses of moderately emetogenic cancer chemotherapy radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula. The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6.</Description>
</NDC>
<NDC>
<NDCCode>54868-0018-3</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (54868-0018-3)</PackageDescription>
<NDC11Code>54868-0018-03</NDC11Code>
<ProductNDC>54868-0018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erythromycin Ethylsuccinate</ProprietaryName>
<NonProprietaryName>Erythromycin Ethylsuccinate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19960227</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA061904</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>ERYTHROMYCIN ETHYLSUCCINATE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Sebaceous Gland Activity [PE],Macrolide [EPC],Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of erythromycin ethylsuccinate tablets and other antibacterial drugs, erythromycin ethylsuccinate tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Erythromycin ethylsuccinate tablets are indicated in the treatment of infections caused by susceptible strains of the designated organisms in the diseases listed below. Upper respiratory tract infections of mild to moderate degree caused by Streptococcus pyogenes, Streptococcus pneumoniae , or Haemophilus influenzae (when used concomitantly with adequate doses of sulfonamides, since many strains of H. influenzae are not susceptible to the erythromycin concentrations ordinarily achieved). (See appropriate sulfonamide labeling for prescribing information.). Lower-respiratory tract infections of mild to moderate severity caused by Streptococcus pneumoniae or Streptococcus pyogenes . Listeriosis caused by Listeria monocytogenes. Pertussis (whooping cough) caused by Bordetella pertussis. Erythromycin is effective in eliminating the organism from the nasopharynx of infected individuals rendering them noninfectious. Some clinical studies suggest that erythromycin may be helpful in the prophylaxis of pertussis in exposed susceptible individuals. Respiratory tract infections due to Mycoplasma pneumoniae . Skin and skin structure infections of mild to moderate severity caused by Streptococcus pyogenes or Staphylococcus aureus (resistant staphylococci may emerge during treatment). Diphtheria: Infections due to Corynebacterium diphtheriae , as an adjunct to antitoxin, to prevent establishment of carriers and to eradicate the organism in carriers. Erythrasma: In the treatment of infections due to Corynebacterium minutissimum. Intestinal amebiasis caused by Entamoeba histolytica (oral erythromycins only). Extraenteric amebiasis requires treatment with other agents. Acute pelvic inflammatory disease caused by Neisseria gonorrhoeae: As an alternative drug in treatment of acute pelvic inflammatory disease caused by N. gonorrhoeae in female patients with a history of sensitivity to penicillin. Patients should have a serologic test for syphilis before receiving erythromycin as treatment of gonorrhea and a follow-up serologic test for syphilis after 3 months. Syphilis Caused by Treponema Pallidum : Erythromycin is an alternate choice of treatment for primary syphilis in penicillin-allergic patients. In primary syphilis, spinal fluid examinations should be done before treatment and as part of follow-up after therapy. Erythromycins are indicated for the treatment of the following infections caused by Chlamydia trachomatis: Conjunctivitis of the newborn, pneumonia of infancy, and urogenital infections during pregnancy. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of uncomplicated urethral, endocervical, or rectal infections in adults due to Chlamydia trachomatis. When tetracyclines are contraindicated or not tolerated, erythromycin is indicated for the treatment of nongonococcal urethritis caused by Ureaplasma urealyticum. Legionnaires' Disease caused by Legionella pneumophila. Although no controlled clinical efficacy studies have been conducted, in vitro and limited preliminary clinical data suggest that erythromycin may be effective in treating Legionnaires' Disease. Penicillin is considered by the American Heart Association to be the drug of choice in the prevention of initial attacks of rheumatic fever (treatment of Streptococcus pyogenes infections of the upper respiratory tract, e.g., tonsillitis or pharyngitis). Erythromycin is indicated for the treatment of penicillin-allergic patients.3 The therapeutic dose should be administered for 10 days. Penicillin or sulfonamides are considered by the American Heart Association to be the drugs of choice in the prevention of recurrent attacks of rheumatic fever. In patients who are allergic to penicillin and sulfonamides, oral erythromycin is recommended by the American Heart Association in the long-term prophylaxis of streptococcal pharyngitis (for the prevention of recurrent attacks of rheumatic fever).3.</IndicationAndUsage>
<Description>Erythromycin is produced by a strain of Saccharopolyspora erythraea (formerly Streptomyces erythraeus) and belongs to the macrolide group of antibiotics. It is basic and readily forms salts with acids. The base, the stearate salt, and the esters are poorly soluble in water. Erythromycin ethylsuccinate is an ester of erythromycin suitable for oral administration. Erythromycin ethylsuccinate is known chemically as erythromycin 2'-(ethylsuccinate). Erythromycin ethylsuccinate tablets for oral administration are intended primarily for adults or older children. Each tablet contains erythromycin ethylsuccinate equivalent to 400 mg of erythromycin activity. The molecular formula is C43H75NO16 and the molecular weight is 862.06. The structural formula is. Confectioner's sugar (contains corn starch), corn starch, FD&C Red No. 40, magnesium stearate, polacrilin potassium and sodium citrate.</Description>
</NDC>
<NDC>
<NDCCode>54868-0021-3</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE, PLASTIC (54868-0021-3)</PackageDescription>
<NDC11Code>54868-0021-03</NDC11Code>
<ProductNDC>54868-0021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950811</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090624</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>800; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>54868-0023-3</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (54868-0023-3)</PackageDescription>
<NDC11Code>54868-0023-03</NDC11Code>
<ProductNDC>54868-0023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062031</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-02-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>54868-0024-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (54868-0024-3)</PackageDescription>
<NDC11Code>54868-0024-03</NDC11Code>
<ProductNDC>54868-0024</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19880301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-0025-3</NDCCode>
<PackageDescription>40 CAPSULE in 1 BOTTLE (54868-0025-3)</PackageDescription>
<NDC11Code>54868-0025-03</NDC11Code>
<ProductNDC>54868-0025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19961009</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060704</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis or ornithosis caused by Chlamydia Psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Calymmatobacterium granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar-boxamide monohydrochloride. Its structural formula is as follows. C22H24N208HCI M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, pregelatinized starch and stearic acid. The inactive ingredients for the gelatin capsules include: (250 mg) FD&C Yellow No. 6, D&C Yellow No. 10, and titanium dioxide; (500 mg): FD&C Blue No. 1, FD&C Red No. 40, D&C Yellow No. 10, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-0032-3</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE, PLASTIC (54868-0032-3)</PackageDescription>
<NDC11Code>54868-0032-03</NDC11Code>
<ProductNDC>54868-0032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diphenoxylate Hydrochloride And Atropine Sulfate</ProprietaryName>
<NonProprietaryName>Diphenoxylate Hydrochloride And Atropine Sulfate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085762</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>DIPHENOXYLATE HYDROCHLORIDE; ATROPINE SULFATE</SubstanceName>
<StrengthNumber>2.5; .025</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Antidiarrheal [EPC],Anticholinergic [EPC],Cholinergic Antagonists [MoA],Cholinergic Muscarinic Antagonist [EPC],Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Diphenoxylate hydrochloride and atropine sulfate tablets are effective as adjunctive therapy in the management of diarrhea.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. diphenoxylatehydrochloride, USP 2.5 mg(Warning – May be habit forming). atropinesulfate, USP 0.025 mg. Diphenoxylate hydrochloride, an antidiarrheal, is ethyl 1-(3-cyano-3, 3-diphenylpropyl)-4-phenyl-isonipecotate monohydrochloride and has the following structure. Atropine sulfate, an anticholinergic, is endo-(±)-alpha-(hydroxymethyl) benzeneacetic acid 8-methyl-8-azabicylo[3.2.1] oct-3-yl ester sulfate (2:1)] (salt) monohydrate and has the following structure. A subtherapeutic amount of atropine sulfate is present to discourage deliberate overdosage. Each tablet for oral administration contains the following inactive ingredients: colloidal silicon dioxide, microcrystalline cellulose, pregelatinized starch and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>54868-0033-3</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (54868-0033-3)</PackageDescription>
<NDC11Code>54868-0033-03</NDC11Code>
<ProductNDC>54868-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dicyclomine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dicyclomine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19951026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA084285</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>DICYCLOMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Dicyclomine hydrochloride tablets and capsules are indicated for the treatment of functional bowel/ irritable bowel syndrome.</IndicationAndUsage>
<Description>Dicyclomine hydrochloride is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following forms. 1. Dicyclomine Hydrochloride Tablets USP, for oral administration, contain 20 mg dicyclomine hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: acacia, pregelatinized starch, anhydrous lactose, compressible sugar, dicalcium phosphate, colloidal silicon dioxide, magnesium stearate, stearic acid, and FD & C Blue #1 Aluminum Lake. 2. Dicyclomine Hydrochloride Capsules USP, for oral administration, contain 10 mg of dicyclomine hydrochloride, USP. In addition, each capsule contains the following inactive ingredients: lactose monohydrate, calcium sulfate, magnesium stearate; and the capsules shells contain: gelatin, FD&C Blue # 1, and FD&C Red # 3. Chemically, dicyclomine hydrochloride is 2-(Diethylamino)ethyl [bicyclohexyl]-1-carboxylate hydrochloride with the structural formula. Dicyclomine hydrochloride occurs as a fine, white, crystalline, practically odorless powder with a bitter taste. It is soluble in water, freely soluble in alcohol and chloroform, and very slightly soluble in ether.</Description>
</NDC>
<NDC>
<NDCCode>54868-0034-3</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (54868-0034-3)</PackageDescription>
<NDC11Code>54868-0034-03</NDC11Code>
<ProductNDC>54868-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoclopramide</ProprietaryName>
<NonProprietaryName>Metoclopramide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078807</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>METOCLOPRAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>The use of metoclopramide tablets is recommended for adults only. Therapy should not exceed 12 weeks in duration. Metoclopramide tablets are indicated as short-term (4 to 12 weeks) therapy for adults with symptomatic, documented gastroesophageal reflux who fail to respond to conventional therapy. The principal effect of metoclopramide is on symptoms of postprandial and daytime heartburn with less observed effect on nocturnal symptoms. If symptoms are confined to particular situations, such as following the evening meal, use of metoclopramide as single doses prior to the provocative situation should be considered, rather than using the drug throughout the day. Healing of esophageal ulcers and erosions has been endoscopically demonstrated at the end of a 12-week trial using doses of 15 mg q.i.d. As there is no documented correlation between symptoms and healing of esophageal lesions, patients with documented lesions should be monitored endoscopically. Metoclopramide tablets, are indicated for the relief of symptoms associated with acute and recurrent diabetic gastric stasis. The usual manifestations of delayed gastric emptying (e.g., nausea, vomiting, heartburn, persistent fullness after meals, and anorexia) appear to respond to metoclopramide tablets within different time intervals. Significant relief of nausea occurs early and continues to improve over a three-week period. Relief of vomiting and anorexia may precede the relief of abdominal fullness by one week or more.</IndicationAndUsage>
<Description>For oral administration, Metoclopramide tablets, USP 10 mg are white to off white, capsule shaped, biconvex tablets with "RF11" embossed on one side and score line on the other side. Each tablet contains. 10 mg of metoclopramide base as metoclopramide hydrochloride USP.</Description>
</NDC>
</NDCList>