{
"NDC": [
{
"NDCCode": "54868-2415-2",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (54868-2415-2)",
"NDC11Code": "54868-2415-02",
"ProductNDC": "54868-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketoprofen",
"NonProprietaryName": "Ketoprofen",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074035",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "KETOPROFEN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketoprofen immediate-release capsules and ketoprofen extended-release capsules before deciding to use ketoprofen immediate-release capsules and ketoprofen extended-release capsules. Use of the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ketoprofen immediate-release capsules and ketoprofen extended-release capsules are indicated for the management of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ketoprofen extended-release capsules are not recommended for treatment of acute pain because of its extended-release characteristics (see CLINICAL PHARMACOLOGY: Pharmacokinetics). Ketoprofen immediate-release capsules are indicated for the management of pain. Ketoprofen immediate-release capsules are also indicated for treatment of primary dysmenorrhea.",
"Description": "Ketoprofen is a non-steroidal anti-inflammatory drug. The chemical name for ketoprofen is 2-(3-benzoylphenyl)-propionic acid with the following structural formula. Its empirical formula is C16H14O3, with a molecular weight of 254.29. It has a pKa of 5.94 in methanol:water (3:1) and an n-octanol:water partition coefficient of 0.97 (buffer pH 7.4). Ketoprofen is a white or off-white, odorless, nonhygroscopic, fine to granular powder, melting at about 95°C. It is freely soluble in ethanol, chloroform, acetone, ether and soluble in benzene and strong alkali, but practically insoluble in water at 20°C. Each ketoprofen immediate-release capsule for oral administration contains 50 mg or 75 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate. In addition, each of the empty gelatin capsules contains gelatin and titanium dioxide and the following colorant agents. 50 mg - D&C Yellow No. 10, FD&C Blue No.1 and FD&C Yellow No. 6. 75 mg - FD&C Blue No.1 and FD&C Green No. 3. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Each ketoprofen extended-release capsule, USP for oral administration contains 200 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: ammonium hydroxide, colloidal anhydrous silica, dibutyl sebacate, ethylcellulose, hypromellose, maltodextrin, methacrylic acid copolymer type B, oleic acid, polyacrylate dispersion, silicon dioxide, sugar spheres, talc, triacetin and triethyl citrate. In addition, each of the empty gelatin capsules contains gelatin, sodium lauryl sulfate, and titanium dioxide and the following colorant agents. black iron oxideFD&C Blue No. 2 yellow iron oxide. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze."
},
{
"NDCCode": "54868-2415-1",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (54868-2415-1)",
"NDC11Code": "54868-2415-01",
"ProductNDC": "54868-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketoprofen",
"NonProprietaryName": "Ketoprofen",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074035",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "KETOPROFEN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketoprofen immediate-release capsules and ketoprofen extended-release capsules before deciding to use ketoprofen immediate-release capsules and ketoprofen extended-release capsules. Use of the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ketoprofen immediate-release capsules and ketoprofen extended-release capsules are indicated for the management of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ketoprofen extended-release capsules are not recommended for treatment of acute pain because of its extended-release characteristics (see CLINICAL PHARMACOLOGY: Pharmacokinetics). Ketoprofen immediate-release capsules are indicated for the management of pain. Ketoprofen immediate-release capsules are also indicated for treatment of primary dysmenorrhea.",
"Description": "Ketoprofen is a non-steroidal anti-inflammatory drug. The chemical name for ketoprofen is 2-(3-benzoylphenyl)-propionic acid with the following structural formula. Its empirical formula is C16H14O3, with a molecular weight of 254.29. It has a pKa of 5.94 in methanol:water (3:1) and an n-octanol:water partition coefficient of 0.97 (buffer pH 7.4). Ketoprofen is a white or off-white, odorless, nonhygroscopic, fine to granular powder, melting at about 95°C. It is freely soluble in ethanol, chloroform, acetone, ether and soluble in benzene and strong alkali, but practically insoluble in water at 20°C. Each ketoprofen immediate-release capsule for oral administration contains 50 mg or 75 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate. In addition, each of the empty gelatin capsules contains gelatin and titanium dioxide and the following colorant agents. 50 mg - D&C Yellow No. 10, FD&C Blue No.1 and FD&C Yellow No. 6. 75 mg - FD&C Blue No.1 and FD&C Green No. 3. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Each ketoprofen extended-release capsule, USP for oral administration contains 200 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: ammonium hydroxide, colloidal anhydrous silica, dibutyl sebacate, ethylcellulose, hypromellose, maltodextrin, methacrylic acid copolymer type B, oleic acid, polyacrylate dispersion, silicon dioxide, sugar spheres, talc, triacetin and triethyl citrate. In addition, each of the empty gelatin capsules contains gelatin, sodium lauryl sulfate, and titanium dioxide and the following colorant agents. black iron oxideFD&C Blue No. 2 yellow iron oxide. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze."
},
{
"NDCCode": "54868-2415-4",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (54868-2415-4)",
"NDC11Code": "54868-2415-04",
"ProductNDC": "54868-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketoprofen",
"NonProprietaryName": "Ketoprofen",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074035",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "KETOPROFEN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketoprofen immediate-release capsules and ketoprofen extended-release capsules before deciding to use ketoprofen immediate-release capsules and ketoprofen extended-release capsules. Use of the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ketoprofen immediate-release capsules and ketoprofen extended-release capsules are indicated for the management of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ketoprofen extended-release capsules are not recommended for treatment of acute pain because of its extended-release characteristics (see CLINICAL PHARMACOLOGY: Pharmacokinetics). Ketoprofen immediate-release capsules are indicated for the management of pain. Ketoprofen immediate-release capsules are also indicated for treatment of primary dysmenorrhea.",
"Description": "Ketoprofen is a non-steroidal anti-inflammatory drug. The chemical name for ketoprofen is 2-(3-benzoylphenyl)-propionic acid with the following structural formula. Its empirical formula is C16H14O3, with a molecular weight of 254.29. It has a pKa of 5.94 in methanol:water (3:1) and an n-octanol:water partition coefficient of 0.97 (buffer pH 7.4). Ketoprofen is a white or off-white, odorless, nonhygroscopic, fine to granular powder, melting at about 95°C. It is freely soluble in ethanol, chloroform, acetone, ether and soluble in benzene and strong alkali, but practically insoluble in water at 20°C. Each ketoprofen immediate-release capsule for oral administration contains 50 mg or 75 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate. In addition, each of the empty gelatin capsules contains gelatin and titanium dioxide and the following colorant agents. 50 mg - D&C Yellow No. 10, FD&C Blue No.1 and FD&C Yellow No. 6. 75 mg - FD&C Blue No.1 and FD&C Green No. 3. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Each ketoprofen extended-release capsule, USP for oral administration contains 200 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: ammonium hydroxide, colloidal anhydrous silica, dibutyl sebacate, ethylcellulose, hypromellose, maltodextrin, methacrylic acid copolymer type B, oleic acid, polyacrylate dispersion, silicon dioxide, sugar spheres, talc, triacetin and triethyl citrate. In addition, each of the empty gelatin capsules contains gelatin, sodium lauryl sulfate, and titanium dioxide and the following colorant agents. black iron oxideFD&C Blue No. 2 yellow iron oxide. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze."
},
{
"NDCCode": "54868-2415-6",
"PackageDescription": "10 CAPSULE in 1 BOTTLE (54868-2415-6)",
"NDC11Code": "54868-2415-06",
"ProductNDC": "54868-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketoprofen",
"NonProprietaryName": "Ketoprofen",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074035",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "KETOPROFEN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketoprofen immediate-release capsules and ketoprofen extended-release capsules before deciding to use ketoprofen immediate-release capsules and ketoprofen extended-release capsules. Use of the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ketoprofen immediate-release capsules and ketoprofen extended-release capsules are indicated for the management of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ketoprofen extended-release capsules are not recommended for treatment of acute pain because of its extended-release characteristics (see CLINICAL PHARMACOLOGY: Pharmacokinetics). Ketoprofen immediate-release capsules are indicated for the management of pain. Ketoprofen immediate-release capsules are also indicated for treatment of primary dysmenorrhea.",
"Description": "Ketoprofen is a non-steroidal anti-inflammatory drug. The chemical name for ketoprofen is 2-(3-benzoylphenyl)-propionic acid with the following structural formula. Its empirical formula is C16H14O3, with a molecular weight of 254.29. It has a pKa of 5.94 in methanol:water (3:1) and an n-octanol:water partition coefficient of 0.97 (buffer pH 7.4). Ketoprofen is a white or off-white, odorless, nonhygroscopic, fine to granular powder, melting at about 95°C. It is freely soluble in ethanol, chloroform, acetone, ether and soluble in benzene and strong alkali, but practically insoluble in water at 20°C. Each ketoprofen immediate-release capsule for oral administration contains 50 mg or 75 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate. In addition, each of the empty gelatin capsules contains gelatin and titanium dioxide and the following colorant agents. 50 mg - D&C Yellow No. 10, FD&C Blue No.1 and FD&C Yellow No. 6. 75 mg - FD&C Blue No.1 and FD&C Green No. 3. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Each ketoprofen extended-release capsule, USP for oral administration contains 200 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: ammonium hydroxide, colloidal anhydrous silica, dibutyl sebacate, ethylcellulose, hypromellose, maltodextrin, methacrylic acid copolymer type B, oleic acid, polyacrylate dispersion, silicon dioxide, sugar spheres, talc, triacetin and triethyl citrate. In addition, each of the empty gelatin capsules contains gelatin, sodium lauryl sulfate, and titanium dioxide and the following colorant agents. black iron oxideFD&C Blue No. 2 yellow iron oxide. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze."
},
{
"NDCCode": "36987-2415-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-2415-2)",
"NDC11Code": "36987-2415-02",
"ProductNDC": "36987-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cultivated Wheat",
"NonProprietaryName": "Cultivated Wheat",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "TRITICUM AESTIVUM POLLEN",
"StrengthNumber": "40000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-2415-2",
"PackageDescription": "200 PELLET in 1 VIAL, GLASS (37662-2415-2) ",
"NDC11Code": "37662-2415-02",
"ProductNDC": "37662-2415",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Acidum Nitricum",
"NonProprietaryName": "Acidum Nitricum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230118",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "NITRIC ACID",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2023-01-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230118",
"SamplePackage": "N"
},
{
"NDCCode": "68071-2415-2",
"PackageDescription": "120 TABLET in 1 BOTTLE (68071-2415-2) ",
"NDC11Code": "68071-2415-02",
"ProductNDC": "68071-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine Besylate",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20101020",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078925",
"LabelerName": "NuCare Pharmaceuticals,Inc.",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210524",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine besylate tablets is a calcium channel blocker and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of. Hypertension ( 1.1) : 1 Amlodipine besylate tablets is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions.",
"Description": "Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl(±)-2- [(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6- methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20H 25ClN 2O 5C 6H 6O 3S, and its structural formula is:. Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, colloidal silicon dioxide and magnesium stearate."
},
{
"NDCCode": "70518-2415-2",
"PackageDescription": "8 TABLET in 1 BOTTLE, PLASTIC (70518-2415-2) ",
"NDC11Code": "70518-2415-02",
"ProductNDC": "70518-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208963",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240823",
"SamplePackage": "N",
"IndicationAndUsage": "Fluconazole tablets are indicated for the treatment of: 1 Vaginal candidiasis (vaginal yeast infections due to Candida). , 2 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candidaurinary tract infections, peritonitis, and systemic Candidainfections including candidemia, disseminated candidiasis, and pneumonia. , 3 Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIESsection. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted. .",
"Description": "Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α 1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C 13H 12F 2N 6O and molecular weight of 306.3. The structural formula is:. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "71335-2415-2",
"PackageDescription": "40 CAPSULE in 1 BOTTLE (71335-2415-2) ",
"NDC11Code": "71335-2415-02",
"ProductNDC": "71335-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracycline Hydrochloride",
"NonProprietaryName": "Tetracycline Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210662",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "TETRACYCLINE HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2024-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241112",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.",
"Description": "Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water."
},
{
"NDCCode": "0527-2415-32",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (0527-2415-32) ",
"NDC11Code": "00527-2415-32",
"ProductNDC": "0527-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride (xl)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208652",
"LabelerName": "Lannett Company Inc.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220131",
"SamplePackage": "N",
"Description": "Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: povidone, tartaric acid, glyceryl distearate, magnesium stearate, hydroxypropyl cellulose, ethylcellulose, methacrylic acid copolymer dispersion and colloidal silicon dioxide. The tablets are printed with black ink comprising of shellac glaze (modified) in SD-45, isopropyl alcohol, black iron oxide non-irradiated, n-butyl alcohol, propylene glycol and ammonium hydroxide. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test #4."
},
{
"NDCCode": "0527-2415-41",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (0527-2415-41) ",
"NDC11Code": "00527-2415-41",
"ProductNDC": "0527-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride (xl)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208652",
"LabelerName": "Lannett Company Inc.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220131",
"SamplePackage": "N",
"Description": "Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: povidone, tartaric acid, glyceryl distearate, magnesium stearate, hydroxypropyl cellulose, ethylcellulose, methacrylic acid copolymer dispersion and colloidal silicon dioxide. The tablets are printed with black ink comprising of shellac glaze (modified) in SD-45, isopropyl alcohol, black iron oxide non-irradiated, n-butyl alcohol, propylene glycol and ammonium hydroxide. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test #4."
},
{
"NDCCode": "0527-2415-43",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (0527-2415-43) ",
"NDC11Code": "00527-2415-43",
"ProductNDC": "0527-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride (xl)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208652",
"LabelerName": "Lannett Company Inc.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220131",
"SamplePackage": "N",
"Description": "Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: povidone, tartaric acid, glyceryl distearate, magnesium stearate, hydroxypropyl cellulose, ethylcellulose, methacrylic acid copolymer dispersion and colloidal silicon dioxide. The tablets are printed with black ink comprising of shellac glaze (modified) in SD-45, isopropyl alcohol, black iron oxide non-irradiated, n-butyl alcohol, propylene glycol and ammonium hydroxide. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test #4."
},
{
"NDCCode": "0527-2415-46",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (0527-2415-46) ",
"NDC11Code": "00527-2415-46",
"ProductNDC": "0527-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride (xl)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208652",
"LabelerName": "Lannett Company Inc.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220131",
"SamplePackage": "N",
"Description": "Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: povidone, tartaric acid, glyceryl distearate, magnesium stearate, hydroxypropyl cellulose, ethylcellulose, methacrylic acid copolymer dispersion and colloidal silicon dioxide. The tablets are printed with black ink comprising of shellac glaze (modified) in SD-45, isopropyl alcohol, black iron oxide non-irradiated, n-butyl alcohol, propylene glycol and ammonium hydroxide. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test #4."
},
{
"NDCCode": "0574-2415-65",
"PackageDescription": "1 TRAY in 1 CARTON (0574-2415-65) / 30 POUCH in 1 TRAY / 1 PATCH in 1 POUCH / 41.3 mg in 1 PATCH",
"NDC11Code": "00574-2415-65",
"ProductNDC": "0574-2415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate Transdermal System",
"NonProprietaryName": "Methylphenidate",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20230605",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021514",
"LabelerName": "PADAGIS US LLC",
"SubstanceName": "METHYLPHENIDATE",
"StrengthNumber": "41.3",
"StrengthUnit": "mg/mg",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-09-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230605",
"SamplePackage": "N",
"IndicationAndUsage": "Methylphenidate Transdermal System (methylphenidate transdermal system) is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in pediatric patients 6 to 17 years of age. Limitations of UseThe use of Methylphenidate Transdermal System is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.8), Use in Specific Populations (8.4)].",
"Description": "Methylphenidate Transdermal System is an adhesive-based matrix transdermal system containing methylphenidate that is applied to intact skin. The chemical name for methylphenidate is α-phenyl-2-piperidineacetic acid methyl ester. It is a white to off-white powder and is soluble in alcohol, ethyl acetate, and ether. Methylphenidate is practically insoluble in water and petrol ether. Its molecular weight is 233.31. Its empirical formula is C14H19NO2. The structural formula of methylphenidate is. Transdermal System Components. Methylphenidate Transdermal System contains methylphenidate in a multipolymeric adhesive. The methylphenidate is dispersed in acrylic adhesive that is dispersed in a silicone adhesive. The composition per unit area of all dosage strengths is identical, and the total dose delivered is dependent on the transdermal system size and wear time. Methylphenidate Transdermal System consists of three layers, as seen in the figure below (cross-section of the transdermal system). Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a polyester/ethylene vinyl acetate laminate film backing, (2) a proprietary adhesive formulation incorporating Noven Pharmaceuticals, Inc.'s DOT Matrix transdermal technology consisting of an acrylic adhesive, a silicone adhesive, and methylphenidate, and (3) a fluoropolymer-coated polyester protective liner, which is attached to the adhesive surface and must be removed before the transdermal system can be used. The active component of the transdermal system is methylphenidate. The remaining components are pharmacologically inactive."
},
{
"NDCCode": "22840-2415-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (22840-2415-1) ",
"NDC11Code": "22840-2415-01",
"ProductNDC": "22840-2415",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "American Hazelnut Pollen",
"NonProprietaryName": "Corylus Americana",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "CORYLUS AMERICANA POLLEN",
"StrengthNumber": ".001",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
},
{
"NDCCode": "54868-0017-2",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (54868-0017-2)",
"NDC11Code": "54868-0017-02",
"ProductNDC": "54868-0017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Niaspan",
"NonProprietaryName": "Niacin",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090512",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020381",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "NIACIN",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nicotinic Acid [EPC],Nicotinic Acids [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hyperlipidemia. Niacin therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. Limitations of Use. No incremental benefit of NIASPAN coadministered with simvastatin or lovastatin on cardiovascular morbidity and mortality over and above that demonstrated for niacin, simvastatin, or lovastatin monotherapy has been established.",
"Description": "NIASPAN (niacin tablet, film-coated extended-release), contains niacin, which at therapeutic doses is an antihyperlipidemic agent. Niacin (nicotinic acid, or 3-pyridinecarboxylic acid) is a white, crystalline powder, very soluble in water, with the following structural formula. NIASPAN is an unscored, medium-orange, film-coated tablet for oral administration and is available in three tablet strengths containing 500, 750, and 1000 mg niacin. NIASPAN tablets also contain the inactive ingredients hypromellose, povidone, stearic acid, and polyethylene glycol, and the following coloring agents: FD&C yellow #6/sunset yellow FCF Aluminum Lake, synthetic red and yellow iron oxides, and titanium dioxide."
},
{
"NDCCode": "54868-0021-2",
"PackageDescription": "14 TABLET in 1 BOTTLE (54868-0021-2)",
"NDC11Code": "54868-0021-02",
"ProductNDC": "54868-0021",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sulfamethoxazole And Trimethoprim",
"NonProprietaryName": "Sulfamethoxazole And Trimethoprim",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19950811",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090624",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "SULFAMETHOXAZOLE; TRIMETHOPRIM",
"StrengthNumber": "800; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "54868-0023-2",
"PackageDescription": "20 CAPSULE in 1 BOTTLE (54868-0023-2)",
"NDC11Code": "54868-0023-02",
"ProductNDC": "54868-0023",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19930611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062031",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline is a broad-spectrum antibiotic synthetically derived from oxytetracycline, and is available as doxycycline hyclate (doxycycline hydrochloride hemiethanolate hemihydrate) for oral administration. The structural formula of doxycycline hyclate is. with a molecular formula of (C22H24N2O8HCl)2C2H6OH2O and a molecular weight of 1025.89. The chemical designation for doxycycline hyclate is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate is a yellow crystalline powder which is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule, for oral administration, contains Doxycycline Hyclate, equivalent to 50 mg or 100 mg of Doxycycline. Each tablet, for oral administration, contains Doxycycline Hyclate, equivalent to 100 mg of Doxycycline. Doxycycline Hyclate Capsules USP 50 mg and 100 mg contain the following inactive ingredients: magnesium stearate and microcrystalline cellulose. The capsule shells contain: FD&C Blue No. 1, gelatin, silicon dioxide, sodium lauryl sulfate and titanium dioxide. Doxycycline Hyclate Tablets USP 100 mg contain the following inactive ingredients: croscarmellose sodium, FD&C Red No. 40, FD&C Yellow No. 6, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium lauryl sulfate and titanium dioxide."
},
{
"NDCCode": "54868-0028-2",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (54868-0028-2)",
"NDC11Code": "54868-0028-02",
"ProductNDC": "54868-0028",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Theophylline",
"NonProprietaryName": "Theophylline",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19961219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089808",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "THEOPHYLLINE ANHYDROUS",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Methylxanthine [EPC],Xanthines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Theophylline extended-release tablets are indicated for the treatment of the symptoms and reversible airflow obstruction associated with chronic asthma and other chronic lung diseases, e.g., emphysema and chronic bronchitis.",
"Description": "Theophylline is structurally classified as a methylxanthine. It occurs as a white, odorless, crystalline powder with a bitter taste. Anhydrous theophylline has the chemical name 1H-Purine-2,6-dione,3,7-dihydro-1,3-dimethyl-, and is represented by the following structural formula. C7H8N4O2 M.W. 180.17. This product allows a 12-hour dosing interval for a majority of patients and a 24-hour dosing interval for selected patients (see DOSAGE AND ADMINISTRATION section for description of appropriate patient populations). Each extended-release tablet for oral administration contains either 100 mg, 200 mg, 300 mg or 450 mg of anhydrous theophylline. Tablets also contain as inactive ingredients: hypromellose, anhydrous lactose, magnesium stearate and povidone."
},
{
"NDCCode": "54868-0029-2",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (54868-0029-2)",
"NDC11Code": "54868-0029-02",
"ProductNDC": "54868-0029",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Theophylline",
"NonProprietaryName": "Theophylline",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20070917",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089763",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "THEOPHYLLINE ANHYDROUS",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Methylxanthine [EPC],Xanthines [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Theophylline extended-release tablets are indicated for the treatment of the symptoms and reversible airflow obstruction associated with chronic asthma and other chronic lung diseases, e.g., emphysema and chronic bronchitis.",
"Description": "Theophylline is structurally classified as a methylxanthine. It occurs as a white, odorless, crystalline powder with a bitter taste. Anhydrous theophylline has the chemical name 1H-Purine-2,6-dione,3,7-dihydro-1,3-dimethyl-, and is represented by the following structural formula. C7H8N4O2 M.W. 180.17. This product allows a 12-hour dosing interval for a majority of patients and a 24-hour dosing interval for selected patients (see DOSAGE AND ADMINISTRATION section for description of appropriate patient populations). Each extended-release tablet for oral administration contains either 100 mg, 200 mg, 300 mg or 450 mg of anhydrous theophylline. Tablets also contain as inactive ingredients: hypromellose, anhydrous lactose, magnesium stearate and povidone."
},
{
"NDCCode": "54868-0033-2",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (54868-0033-2)",
"NDC11Code": "54868-0033-02",
"ProductNDC": "54868-0033",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dicyclomine Hydrochloride",
"NonProprietaryName": "Dicyclomine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19951026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA084285",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "DICYCLOMINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Dicyclomine hydrochloride tablets and capsules are indicated for the treatment of functional bowel/ irritable bowel syndrome.",
"Description": "Dicyclomine hydrochloride is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following forms. 1. Dicyclomine Hydrochloride Tablets USP, for oral administration, contain 20 mg dicyclomine hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: acacia, pregelatinized starch, anhydrous lactose, compressible sugar, dicalcium phosphate, colloidal silicon dioxide, magnesium stearate, stearic acid, and FD & C Blue #1 Aluminum Lake. 2. Dicyclomine Hydrochloride Capsules USP, for oral administration, contain 10 mg of dicyclomine hydrochloride, USP. In addition, each capsule contains the following inactive ingredients: lactose monohydrate, calcium sulfate, magnesium stearate; and the capsules shells contain: gelatin, FD&C Blue # 1, and FD&C Red # 3. Chemically, dicyclomine hydrochloride is 2-(Diethylamino)ethyl [bicyclohexyl]-1-carboxylate hydrochloride with the structural formula. Dicyclomine hydrochloride occurs as a fine, white, crystalline, practically odorless powder with a bitter taste. It is soluble in water, freely soluble in alcohol and chloroform, and very slightly soluble in ether."
},
{
"NDCCode": "54868-0034-2",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (54868-0034-2)",
"NDC11Code": "54868-0034-02",
"ProductNDC": "54868-0034",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoclopramide",
"NonProprietaryName": "Metoclopramide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20030501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078807",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "METOCLOPRAMIDE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "The use of metoclopramide tablets is recommended for adults only. Therapy should not exceed 12 weeks in duration. Metoclopramide tablets are indicated as short-term (4 to 12 weeks) therapy for adults with symptomatic, documented gastroesophageal reflux who fail to respond to conventional therapy. The principal effect of metoclopramide is on symptoms of postprandial and daytime heartburn with less observed effect on nocturnal symptoms. If symptoms are confined to particular situations, such as following the evening meal, use of metoclopramide as single doses prior to the provocative situation should be considered, rather than using the drug throughout the day. Healing of esophageal ulcers and erosions has been endoscopically demonstrated at the end of a 12-week trial using doses of 15 mg q.i.d. As there is no documented correlation between symptoms and healing of esophageal lesions, patients with documented lesions should be monitored endoscopically. Metoclopramide tablets, are indicated for the relief of symptoms associated with acute and recurrent diabetic gastric stasis. The usual manifestations of delayed gastric emptying (e.g., nausea, vomiting, heartburn, persistent fullness after meals, and anorexia) appear to respond to metoclopramide tablets within different time intervals. Significant relief of nausea occurs early and continues to improve over a three-week period. Relief of vomiting and anorexia may precede the relief of abdominal fullness by one week or more.",
"Description": "For oral administration, Metoclopramide tablets, USP 10 mg are white to off white, capsule shaped, biconvex tablets with \"RF11\" embossed on one side and score line on the other side. Each tablet contains. 10 mg of metoclopramide base as metoclopramide hydrochloride USP."
},
{
"NDCCode": "54868-0038-2",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (54868-0038-2)",
"NDC11Code": "54868-0038-02",
"ProductNDC": "54868-0038",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temazepam",
"NonProprietaryName": "Temazepam",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20080110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070920",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "TEMAZEPAM",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Temazepam is indicated for the short-term treatment of insomnia (generally 7 to 10 days). For patients with short-term insomnia, instructions in the prescription should indicate that temazepam should be used for short periods of time (7 to 10 days). The clinical trials performed in support of efficacy were 2 weeks in duration with the final formal assessment of sleep latency performed at the end of treatment.",
"Description": "Temazepam is a benzodiazepine hypnotic agent. The chemical name is 7-chloro-1,3-dihydro-3-hydroxy-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. Its structural formula may be represented as follows. C16H13ClN2O2 M.W. = 300.74. Temazepam, USP is a white, crystalline substance, very slightly soluble in water and sparingly soluble in alcohol. Temazepam capsules, 15 mg, 22.5 mg and 30 mg, are for oral administration. Each capsule contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, powdered cellulose and sodium lauryl sulfate."
},
{
"NDCCode": "54868-0039-2",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (54868-0039-2)",
"NDC11Code": "54868-0039-02",
"ProductNDC": "54868-0039",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temazepam",
"NonProprietaryName": "Temazepam",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20050111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070920",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "TEMAZEPAM",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Temazepam is indicated for the short-term treatment of insomnia (generally 7 to 10 days). For patients with short-term insomnia, instructions in the prescription should indicate that temazepam should be used for short periods of time (7 to 10 days). The clinical trials performed in support of efficacy were 2 weeks in duration with the final formal assessment of sleep latency performed at the end of treatment.",
"Description": "Temazepam is a benzodiazepine hypnotic agent. The chemical name is 7-chloro-1,3-dihydro-3-hydroxy-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. Its structural formula may be represented as follows. C16H13ClN2O2 M.W. = 300.74. Temazepam, USP is a white, crystalline substance, very slightly soluble in water and sparingly soluble in alcohol. Temazepam capsules, 15 mg, 22.5 mg and 30 mg, are for oral administration. Each capsule contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, powdered cellulose and sodium lauryl sulfate."
},
{
"NDCCode": "54868-0042-2",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (54868-0042-2)",
"NDC11Code": "54868-0042-02",
"ProductNDC": "54868-0042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dipyridamole",
"NonProprietaryName": "Dipyridamole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090807",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088999",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "DIPYRIDAMOLE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Aggregation [PE],Platelet Aggregation Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2014-02-19"
},
{
"NDCCode": "54868-0043-2",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (54868-0043-2)",
"NDC11Code": "54868-0043-02",
"ProductNDC": "54868-0043",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dipyridamole",
"NonProprietaryName": "Dipyridamole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089000",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "DIPYRIDAMOLE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Aggregation [PE],Platelet Aggregation Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2014-02-19"
},
{
"NDCCode": "54868-0044-2",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (54868-0044-2)",
"NDC11Code": "54868-0044-02",
"ProductNDC": "54868-0044",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dipyridamole",
"NonProprietaryName": "Dipyridamole",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090608",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089001",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "DIPYRIDAMOLE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Aggregation [PE],Platelet Aggregation Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2014-02-19"
},
{
"NDCCode": "54868-0048-2",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (54868-0048-2)",
"NDC11Code": "54868-0048-02",
"ProductNDC": "54868-0048",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonidine Hydrochloride",
"NonProprietaryName": "Clonidine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20011003",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070925",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "CLONIDINE HYDROCHLORIDE",
"StrengthNumber": ".1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clonidine hydrochloride USP tablets are indicated in the treatment of hypertension. Clonidine hydrochloride USP tablets may be employed alone or concomitantly with other antihypertensive agents.",
"Description": "Clonidine hydrochloride USP is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. Clonidine hydrochloride tablets contain the following inactive ingredients: lactose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. The 0.1 mg also contains D&C yellow #10 aluminum lake, and the 0.3 mg contains D&C yellow #10 aluminum lake and FD&C blue #1 aluminum lake. Clonidine hydrochloride is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. Clonidine hydrochloride is an odorless, bitter, white, crystalline substance soluble in water and alcohol."
},
{
"NDCCode": "54868-0049-2",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (54868-0049-2)",
"NDC11Code": "54868-0049-02",
"ProductNDC": "54868-0049",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clonidine Hydrochloride",
"NonProprietaryName": "Clonidine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19950109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070924",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "CLONIDINE HYDROCHLORIDE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clonidine hydrochloride USP tablets are indicated in the treatment of hypertension. Clonidine hydrochloride USP tablets may be employed alone or concomitantly with other antihypertensive agents.",
"Description": "Clonidine hydrochloride USP is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. Clonidine hydrochloride tablets contain the following inactive ingredients: lactose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. The 0.1 mg also contains D&C yellow #10 aluminum lake, and the 0.3 mg contains D&C yellow #10 aluminum lake and FD&C blue #1 aluminum lake. Clonidine hydrochloride is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. Clonidine hydrochloride is an odorless, bitter, white, crystalline substance soluble in water and alcohol."
},
{
"NDCCode": "54868-0050-2",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (54868-0050-2)",
"NDC11Code": "54868-0050-02",
"ProductNDC": "54868-0050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methyldopa",
"NonProprietaryName": "Methyldopa",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19950829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070098",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "METHYLDOPA",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension.",
"Description": "Methyldopa USP is an antihypertensive drug. Methyldopa USP is the L-isomer of alpha-methyldopa. Its chemical name is levo-3-(3,4-dihydroxyphenyl)- 2-methylalanine sesquihydrate. Its structural formula is. C 10H13NO4 1 1/2 H2O M.W. 238.24. Methyldopa USP is a white to yellowish white, odorless fine powder and is sparingly soluble in water. Each tablet, for oral administration, contains 250 mg or 500 mg of methyldopa USP. Potency is calculated in the anhydrous basis. Inactive ingredients: citric acid, colloidal silicon dioxide, edetate disodium, ethylcellulose, hypromellose, magnesium stearate, methylcellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide. In addition, the 250 mg tablet contains calcium sulfate, hydroxypropyl cellulose, and talc, and the 500 mg tablet contains polysorbate 80."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>54868-2415-2</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (54868-2415-2)</PackageDescription>
<NDC11Code>54868-2415-02</NDC11Code>
<ProductNDC>54868-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketoprofen</ProprietaryName>
<NonProprietaryName>Ketoprofen</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074035</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>KETOPROFEN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketoprofen immediate-release capsules and ketoprofen extended-release capsules before deciding to use ketoprofen immediate-release capsules and ketoprofen extended-release capsules. Use of the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ketoprofen immediate-release capsules and ketoprofen extended-release capsules are indicated for the management of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ketoprofen extended-release capsules are not recommended for treatment of acute pain because of its extended-release characteristics (see CLINICAL PHARMACOLOGY: Pharmacokinetics). Ketoprofen immediate-release capsules are indicated for the management of pain. Ketoprofen immediate-release capsules are also indicated for treatment of primary dysmenorrhea.</IndicationAndUsage>
<Description>Ketoprofen is a non-steroidal anti-inflammatory drug. The chemical name for ketoprofen is 2-(3-benzoylphenyl)-propionic acid with the following structural formula. Its empirical formula is C16H14O3, with a molecular weight of 254.29. It has a pKa of 5.94 in methanol:water (3:1) and an n-octanol:water partition coefficient of 0.97 (buffer pH 7.4). Ketoprofen is a white or off-white, odorless, nonhygroscopic, fine to granular powder, melting at about 95°C. It is freely soluble in ethanol, chloroform, acetone, ether and soluble in benzene and strong alkali, but practically insoluble in water at 20°C. Each ketoprofen immediate-release capsule for oral administration contains 50 mg or 75 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate. In addition, each of the empty gelatin capsules contains gelatin and titanium dioxide and the following colorant agents. 50 mg - D&C Yellow No. 10, FD&C Blue No.1 and FD&C Yellow No. 6. 75 mg - FD&C Blue No.1 and FD&C Green No. 3. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Each ketoprofen extended-release capsule, USP for oral administration contains 200 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: ammonium hydroxide, colloidal anhydrous silica, dibutyl sebacate, ethylcellulose, hypromellose, maltodextrin, methacrylic acid copolymer type B, oleic acid, polyacrylate dispersion, silicon dioxide, sugar spheres, talc, triacetin and triethyl citrate. In addition, each of the empty gelatin capsules contains gelatin, sodium lauryl sulfate, and titanium dioxide and the following colorant agents. black iron oxideFD&C Blue No. 2 yellow iron oxide. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>54868-2415-1</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (54868-2415-1)</PackageDescription>
<NDC11Code>54868-2415-01</NDC11Code>
<ProductNDC>54868-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketoprofen</ProprietaryName>
<NonProprietaryName>Ketoprofen</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074035</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>KETOPROFEN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketoprofen immediate-release capsules and ketoprofen extended-release capsules before deciding to use ketoprofen immediate-release capsules and ketoprofen extended-release capsules. Use of the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ketoprofen immediate-release capsules and ketoprofen extended-release capsules are indicated for the management of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ketoprofen extended-release capsules are not recommended for treatment of acute pain because of its extended-release characteristics (see CLINICAL PHARMACOLOGY: Pharmacokinetics). Ketoprofen immediate-release capsules are indicated for the management of pain. Ketoprofen immediate-release capsules are also indicated for treatment of primary dysmenorrhea.</IndicationAndUsage>
<Description>Ketoprofen is a non-steroidal anti-inflammatory drug. The chemical name for ketoprofen is 2-(3-benzoylphenyl)-propionic acid with the following structural formula. Its empirical formula is C16H14O3, with a molecular weight of 254.29. It has a pKa of 5.94 in methanol:water (3:1) and an n-octanol:water partition coefficient of 0.97 (buffer pH 7.4). Ketoprofen is a white or off-white, odorless, nonhygroscopic, fine to granular powder, melting at about 95°C. It is freely soluble in ethanol, chloroform, acetone, ether and soluble in benzene and strong alkali, but practically insoluble in water at 20°C. Each ketoprofen immediate-release capsule for oral administration contains 50 mg or 75 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate. In addition, each of the empty gelatin capsules contains gelatin and titanium dioxide and the following colorant agents. 50 mg - D&C Yellow No. 10, FD&C Blue No.1 and FD&C Yellow No. 6. 75 mg - FD&C Blue No.1 and FD&C Green No. 3. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Each ketoprofen extended-release capsule, USP for oral administration contains 200 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: ammonium hydroxide, colloidal anhydrous silica, dibutyl sebacate, ethylcellulose, hypromellose, maltodextrin, methacrylic acid copolymer type B, oleic acid, polyacrylate dispersion, silicon dioxide, sugar spheres, talc, triacetin and triethyl citrate. In addition, each of the empty gelatin capsules contains gelatin, sodium lauryl sulfate, and titanium dioxide and the following colorant agents. black iron oxideFD&C Blue No. 2 yellow iron oxide. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>54868-2415-4</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (54868-2415-4)</PackageDescription>
<NDC11Code>54868-2415-04</NDC11Code>
<ProductNDC>54868-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketoprofen</ProprietaryName>
<NonProprietaryName>Ketoprofen</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074035</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>KETOPROFEN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketoprofen immediate-release capsules and ketoprofen extended-release capsules before deciding to use ketoprofen immediate-release capsules and ketoprofen extended-release capsules. Use of the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ketoprofen immediate-release capsules and ketoprofen extended-release capsules are indicated for the management of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ketoprofen extended-release capsules are not recommended for treatment of acute pain because of its extended-release characteristics (see CLINICAL PHARMACOLOGY: Pharmacokinetics). Ketoprofen immediate-release capsules are indicated for the management of pain. Ketoprofen immediate-release capsules are also indicated for treatment of primary dysmenorrhea.</IndicationAndUsage>
<Description>Ketoprofen is a non-steroidal anti-inflammatory drug. The chemical name for ketoprofen is 2-(3-benzoylphenyl)-propionic acid with the following structural formula. Its empirical formula is C16H14O3, with a molecular weight of 254.29. It has a pKa of 5.94 in methanol:water (3:1) and an n-octanol:water partition coefficient of 0.97 (buffer pH 7.4). Ketoprofen is a white or off-white, odorless, nonhygroscopic, fine to granular powder, melting at about 95°C. It is freely soluble in ethanol, chloroform, acetone, ether and soluble in benzene and strong alkali, but practically insoluble in water at 20°C. Each ketoprofen immediate-release capsule for oral administration contains 50 mg or 75 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate. In addition, each of the empty gelatin capsules contains gelatin and titanium dioxide and the following colorant agents. 50 mg - D&C Yellow No. 10, FD&C Blue No.1 and FD&C Yellow No. 6. 75 mg - FD&C Blue No.1 and FD&C Green No. 3. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Each ketoprofen extended-release capsule, USP for oral administration contains 200 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: ammonium hydroxide, colloidal anhydrous silica, dibutyl sebacate, ethylcellulose, hypromellose, maltodextrin, methacrylic acid copolymer type B, oleic acid, polyacrylate dispersion, silicon dioxide, sugar spheres, talc, triacetin and triethyl citrate. In addition, each of the empty gelatin capsules contains gelatin, sodium lauryl sulfate, and titanium dioxide and the following colorant agents. black iron oxideFD&C Blue No. 2 yellow iron oxide. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>54868-2415-6</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE (54868-2415-6)</PackageDescription>
<NDC11Code>54868-2415-06</NDC11Code>
<ProductNDC>54868-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketoprofen</ProprietaryName>
<NonProprietaryName>Ketoprofen</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074035</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>KETOPROFEN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketoprofen immediate-release capsules and ketoprofen extended-release capsules before deciding to use ketoprofen immediate-release capsules and ketoprofen extended-release capsules. Use of the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Ketoprofen immediate-release capsules and ketoprofen extended-release capsules are indicated for the management of the signs and symptoms of rheumatoid arthritis and osteoarthritis. Ketoprofen extended-release capsules are not recommended for treatment of acute pain because of its extended-release characteristics (see CLINICAL PHARMACOLOGY: Pharmacokinetics). Ketoprofen immediate-release capsules are indicated for the management of pain. Ketoprofen immediate-release capsules are also indicated for treatment of primary dysmenorrhea.</IndicationAndUsage>
<Description>Ketoprofen is a non-steroidal anti-inflammatory drug. The chemical name for ketoprofen is 2-(3-benzoylphenyl)-propionic acid with the following structural formula. Its empirical formula is C16H14O3, with a molecular weight of 254.29. It has a pKa of 5.94 in methanol:water (3:1) and an n-octanol:water partition coefficient of 0.97 (buffer pH 7.4). Ketoprofen is a white or off-white, odorless, nonhygroscopic, fine to granular powder, melting at about 95°C. It is freely soluble in ethanol, chloroform, acetone, ether and soluble in benzene and strong alkali, but practically insoluble in water at 20°C. Each ketoprofen immediate-release capsule for oral administration contains 50 mg or 75 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate. In addition, each of the empty gelatin capsules contains gelatin and titanium dioxide and the following colorant agents. 50 mg - D&C Yellow No. 10, FD&C Blue No.1 and FD&C Yellow No. 6. 75 mg - FD&C Blue No.1 and FD&C Green No. 3. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze. Each ketoprofen extended-release capsule, USP for oral administration contains 200 mg of ketoprofen, USP. In addition, each capsule contains the following inactive ingredients: ammonium hydroxide, colloidal anhydrous silica, dibutyl sebacate, ethylcellulose, hypromellose, maltodextrin, methacrylic acid copolymer type B, oleic acid, polyacrylate dispersion, silicon dioxide, sugar spheres, talc, triacetin and triethyl citrate. In addition, each of the empty gelatin capsules contains gelatin, sodium lauryl sulfate, and titanium dioxide and the following colorant agents. black iron oxideFD&C Blue No. 2 yellow iron oxide. The imprinting ink contains the following: black iron oxide, D&C Yellow No.10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>36987-2415-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-2415-2)</PackageDescription>
<NDC11Code>36987-2415-02</NDC11Code>
<ProductNDC>36987-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cultivated Wheat</ProprietaryName>
<NonProprietaryName>Cultivated Wheat</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>TRITICUM AESTIVUM POLLEN</SubstanceName>
<StrengthNumber>40000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-2415-2</NDCCode>
<PackageDescription>200 PELLET in 1 VIAL, GLASS (37662-2415-2) </PackageDescription>
<NDC11Code>37662-2415-02</NDC11Code>
<ProductNDC>37662-2415</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Acidum Nitricum</ProprietaryName>
<NonProprietaryName>Acidum Nitricum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230118</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>NITRIC ACID</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-01-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68071-2415-2</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (68071-2415-2) </PackageDescription>
<NDC11Code>68071-2415-02</NDC11Code>
<ProductNDC>68071-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine Besylate</ProprietaryName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101020</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078925</ApplicationNumber>
<LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine besylate tablets is a calcium channel blocker and may be used alone or in combination with other antihypertensive and antianginal agents for the treatment of. Hypertension ( 1.1) : 1 Amlodipine besylate tablets is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions.</IndicationAndUsage>
<Description>Amlodipine besylate is the besylate salt of amlodipine, a long-acting calcium channel blocker. Amlodipine besylate is chemically described as 3-Ethyl-5-methyl(±)-2- [(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6- methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its molecular formula is C 20H 25ClN 2O 5C 6H 6O 3S, and its structural formula is:. Amlodipine besylate is a white crystalline powder with a molecular weight of 567.1. It is slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate tablets, USP are formulated as white tablets equivalent to 2.5, 5, and 10 mg of amlodipine for oral administration. In addition to the active ingredient, amlodipine besylate, each tablet contains the following inactive ingredients: microcrystalline cellulose, dibasic calcium phosphate anhydrous, sodium starch glycolate, colloidal silicon dioxide and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>70518-2415-2</NDCCode>
<PackageDescription>8 TABLET in 1 BOTTLE, PLASTIC (70518-2415-2) </PackageDescription>
<NDC11Code>70518-2415-02</NDC11Code>
<ProductNDC>70518-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208963</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240823</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluconazole tablets are indicated for the treatment of: 1 Vaginal candidiasis (vaginal yeast infections due to Candida). , 2 Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole tablets were also effective for the treatment of Candidaurinary tract infections, peritonitis, and systemic Candidainfections including candidemia, disseminated candidiasis, and pneumonia. , 3 Cryptococcal meningitis. Before prescribing fluconazole tablets for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIESsection. Studies comparing fluconazole tablets to amphotericin B in non-HIV infected patients have not been conducted. .</IndicationAndUsage>
<Description>Fluconazole, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole is designated chemically as 2,4-difluoro-α,α 1-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol with an molecular formula of C 13H 12F 2N 6O and molecular weight of 306.3. The structural formula is:. Fluconazole USP is a white or almost white crystalline powder which is freely soluble in methanol, soluble in alcohol and in acetone, sparingly soluble in isopropanol and in chloroform, slightly soluble in water, very slightly soluble in toluene. Each fluconazole tablet, USP intended for oral administration contains 50 mg, 100 mg, 150 mg, or 200 mg of fluconazole USP. In addition, each tablet contains the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, fd&c red no. 40 aluminum lake, magnesium stearate, microcrystalline cellulose and povidone. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>71335-2415-2</NDCCode>
<PackageDescription>40 CAPSULE in 1 BOTTLE (71335-2415-2) </PackageDescription>
<NDC11Code>71335-2415-02</NDC11Code>
<ProductNDC>71335-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210662</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae and Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible., 2 Lower respiratory tract infections caused by Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and Klebsiella sp.), 3 Skin and soft tissue infections caused by Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.), 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox., 5 Psittacosis caused by Chlamydophila psittaci., 6 Infections caused by Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum., 7 Granuloma inquinale caused by Klebsiella granulomatis., 8 Relapsing fever caused by Borrelia sp., 9 Bartonellosis caused by Bartonella bacilliformis., 10 Chancroid caused by Hemophilus ducreyi., 11 Tularemia caused by Francisella tularensis., 12 Plaque caused by Yersinia pestis., 13 Cholera caused by Vibrio cholerae., 14 Brucellosis caused by Brucella species (tetracycline may be used in conjunction with an aminoglycoside)., 15 Infections due to Campylobacter fetus., 16 As adjunctive therapy in intestinal amebiasis caused by Entamoeba histolytica., 17 Urinary tract infections caused by susceptible strains of Escherichia coli, Klebsiella, etc., 18 Other infections caused by susceptible gram-negative organisms such as E. coli, Enterobacter aerogenes, Shigella sp., Acinetobacter sp., Klebsiella sp., and Bacteroides sp., 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
<Description>Tetracycline is a yellow crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino)- 1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecar- boxamide monohydrochloride. Its structural formula is as follows. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose Monohydrate, Colloidal silicon dioxide, and magnesium stearate. The 250 mg capsule shells contain Gelatin, FD & C Blue 1, Titanium Dioxide, D & C Yellow 10, and FD & C Yellow 6. The 500 mg capsule shells contain Gelatin, FD&C Blue #1, and Titanium Dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains Shellac, Propylene Glycol, Black Iron Oxide, Potassium Hydroxide and Purified water.</Description>
</NDC>
<NDC>
<NDCCode>0527-2415-32</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (0527-2415-32) </PackageDescription>
<NDC11Code>00527-2415-32</NDC11Code>
<ProductNDC>0527-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride (xl)</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208652</ApplicationNumber>
<LabelerName>Lannett Company Inc.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: povidone, tartaric acid, glyceryl distearate, magnesium stearate, hydroxypropyl cellulose, ethylcellulose, methacrylic acid copolymer dispersion and colloidal silicon dioxide. The tablets are printed with black ink comprising of shellac glaze (modified) in SD-45, isopropyl alcohol, black iron oxide non-irradiated, n-butyl alcohol, propylene glycol and ammonium hydroxide. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test #4.</Description>
</NDC>
<NDC>
<NDCCode>0527-2415-41</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (0527-2415-41) </PackageDescription>
<NDC11Code>00527-2415-41</NDC11Code>
<ProductNDC>0527-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride (xl)</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208652</ApplicationNumber>
<LabelerName>Lannett Company Inc.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: povidone, tartaric acid, glyceryl distearate, magnesium stearate, hydroxypropyl cellulose, ethylcellulose, methacrylic acid copolymer dispersion and colloidal silicon dioxide. The tablets are printed with black ink comprising of shellac glaze (modified) in SD-45, isopropyl alcohol, black iron oxide non-irradiated, n-butyl alcohol, propylene glycol and ammonium hydroxide. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test #4.</Description>
</NDC>
<NDC>
<NDCCode>0527-2415-43</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (0527-2415-43) </PackageDescription>
<NDC11Code>00527-2415-43</NDC11Code>
<ProductNDC>0527-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride (xl)</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208652</ApplicationNumber>
<LabelerName>Lannett Company Inc.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: povidone, tartaric acid, glyceryl distearate, magnesium stearate, hydroxypropyl cellulose, ethylcellulose, methacrylic acid copolymer dispersion and colloidal silicon dioxide. The tablets are printed with black ink comprising of shellac glaze (modified) in SD-45, isopropyl alcohol, black iron oxide non-irradiated, n-butyl alcohol, propylene glycol and ammonium hydroxide. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test #4.</Description>
</NDC>
<NDC>
<NDCCode>0527-2415-46</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (0527-2415-46) </PackageDescription>
<NDC11Code>00527-2415-46</NDC11Code>
<ProductNDC>0527-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride (xl)</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208652</ApplicationNumber>
<LabelerName>Lannett Company Inc.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Bupropion hydrochloride extended-release tablets (XL), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin reuptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO·HCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg and 300 mg white to off-white extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: povidone, tartaric acid, glyceryl distearate, magnesium stearate, hydroxypropyl cellulose, ethylcellulose, methacrylic acid copolymer dispersion and colloidal silicon dioxide. The tablets are printed with black ink comprising of shellac glaze (modified) in SD-45, isopropyl alcohol, black iron oxide non-irradiated, n-butyl alcohol, propylene glycol and ammonium hydroxide. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. Meets USP Dissolution Test #4.</Description>
</NDC>
<NDC>
<NDCCode>0574-2415-65</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (0574-2415-65) / 30 POUCH in 1 TRAY / 1 PATCH in 1 POUCH / 41.3 mg in 1 PATCH</PackageDescription>
<NDC11Code>00574-2415-65</NDC11Code>
<ProductNDC>0574-2415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate Transdermal System</ProprietaryName>
<NonProprietaryName>Methylphenidate</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20230605</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021514</ApplicationNumber>
<LabelerName>PADAGIS US LLC</LabelerName>
<SubstanceName>METHYLPHENIDATE</SubstanceName>
<StrengthNumber>41.3</StrengthNumber>
<StrengthUnit>mg/mg</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-09-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230605</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylphenidate Transdermal System (methylphenidate transdermal system) is indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD) in pediatric patients 6 to 17 years of age. Limitations of UseThe use of Methylphenidate Transdermal System is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.8), Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Methylphenidate Transdermal System is an adhesive-based matrix transdermal system containing methylphenidate that is applied to intact skin. The chemical name for methylphenidate is α-phenyl-2-piperidineacetic acid methyl ester. It is a white to off-white powder and is soluble in alcohol, ethyl acetate, and ether. Methylphenidate is practically insoluble in water and petrol ether. Its molecular weight is 233.31. Its empirical formula is C14H19NO2. The structural formula of methylphenidate is. Transdermal System Components. Methylphenidate Transdermal System contains methylphenidate in a multipolymeric adhesive. The methylphenidate is dispersed in acrylic adhesive that is dispersed in a silicone adhesive. The composition per unit area of all dosage strengths is identical, and the total dose delivered is dependent on the transdermal system size and wear time. Methylphenidate Transdermal System consists of three layers, as seen in the figure below (cross-section of the transdermal system). Proceeding from the outer surface toward the surface adhering to the skin, the layers are (1) a polyester/ethylene vinyl acetate laminate film backing, (2) a proprietary adhesive formulation incorporating Noven Pharmaceuticals, Inc.'s DOT Matrix transdermal technology consisting of an acrylic adhesive, a silicone adhesive, and methylphenidate, and (3) a fluoropolymer-coated polyester protective liner, which is attached to the adhesive surface and must be removed before the transdermal system can be used. The active component of the transdermal system is methylphenidate. The remaining components are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>22840-2415-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (22840-2415-1) </PackageDescription>
<NDC11Code>22840-2415-01</NDC11Code>
<ProductNDC>22840-2415</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>American Hazelnut Pollen</ProprietaryName>
<NonProprietaryName>Corylus Americana</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>CORYLUS AMERICANA POLLEN</SubstanceName>
<StrengthNumber>.001</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies.</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
<NDC>
<NDCCode>54868-0017-2</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (54868-0017-2)</PackageDescription>
<NDC11Code>54868-0017-02</NDC11Code>
<ProductNDC>54868-0017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Niaspan</ProprietaryName>
<NonProprietaryName>Niacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090512</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020381</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>NIACIN</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nicotinic Acid [EPC],Nicotinic Acids [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hyperlipidemia. Niacin therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. Limitations of Use. No incremental benefit of NIASPAN coadministered with simvastatin or lovastatin on cardiovascular morbidity and mortality over and above that demonstrated for niacin, simvastatin, or lovastatin monotherapy has been established.</IndicationAndUsage>
<Description>NIASPAN (niacin tablet, film-coated extended-release), contains niacin, which at therapeutic doses is an antihyperlipidemic agent. Niacin (nicotinic acid, or 3-pyridinecarboxylic acid) is a white, crystalline powder, very soluble in water, with the following structural formula. NIASPAN is an unscored, medium-orange, film-coated tablet for oral administration and is available in three tablet strengths containing 500, 750, and 1000 mg niacin. NIASPAN tablets also contain the inactive ingredients hypromellose, povidone, stearic acid, and polyethylene glycol, and the following coloring agents: FD&C yellow #6/sunset yellow FCF Aluminum Lake, synthetic red and yellow iron oxides, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-0021-2</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE (54868-0021-2)</PackageDescription>
<NDC11Code>54868-0021-02</NDC11Code>
<ProductNDC>54868-0021</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sulfamethoxazole And Trimethoprim</ProprietaryName>
<NonProprietaryName>Sulfamethoxazole And Trimethoprim</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950811</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090624</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>SULFAMETHOXAZOLE; TRIMETHOPRIM</SubstanceName>
<StrengthNumber>800; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Sulfonamide Antimicrobial [EPC],Sulfonamides [Chemical/Ingredient],Cytochrome P450 2C9 Inhibitors [MoA],Dihydrofolate Reductase Inhibitor Antibacterial [EPC],Dihydrofolate Reductase Inhibitors [MoA],Cytochrome P450 2C8 Inhibitors [MoA],Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>54868-0023-2</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE (54868-0023-2)</PackageDescription>
<NDC11Code>54868-0023-02</NDC11Code>
<ProductNDC>54868-0023</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062031</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate and other antibacterial drugs, doxycycline hyclate should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibiotic synthetically derived from oxytetracycline, and is available as doxycycline hyclate (doxycycline hydrochloride hemiethanolate hemihydrate) for oral administration. The structural formula of doxycycline hyclate is. with a molecular formula of (C22H24N2O8HCl)2C2H6OH2O and a molecular weight of 1025.89. The chemical designation for doxycycline hyclate is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. Doxycycline hyclate is a yellow crystalline powder which is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule, for oral administration, contains Doxycycline Hyclate, equivalent to 50 mg or 100 mg of Doxycycline. Each tablet, for oral administration, contains Doxycycline Hyclate, equivalent to 100 mg of Doxycycline. Doxycycline Hyclate Capsules USP 50 mg and 100 mg contain the following inactive ingredients: magnesium stearate and microcrystalline cellulose. The capsule shells contain: FD&C Blue No. 1, gelatin, silicon dioxide, sodium lauryl sulfate and titanium dioxide. Doxycycline Hyclate Tablets USP 100 mg contain the following inactive ingredients: croscarmellose sodium, FD&C Red No. 40, FD&C Yellow No. 6, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium lauryl sulfate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>54868-0028-2</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (54868-0028-2)</PackageDescription>
<NDC11Code>54868-0028-02</NDC11Code>
<ProductNDC>54868-0028</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Theophylline</ProprietaryName>
<NonProprietaryName>Theophylline</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19961219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089808</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>THEOPHYLLINE ANHYDROUS</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Methylxanthine [EPC],Xanthines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Theophylline extended-release tablets are indicated for the treatment of the symptoms and reversible airflow obstruction associated with chronic asthma and other chronic lung diseases, e.g., emphysema and chronic bronchitis.</IndicationAndUsage>
<Description>Theophylline is structurally classified as a methylxanthine. It occurs as a white, odorless, crystalline powder with a bitter taste. Anhydrous theophylline has the chemical name 1H-Purine-2,6-dione,3,7-dihydro-1,3-dimethyl-, and is represented by the following structural formula. C7H8N4O2 M.W. 180.17. This product allows a 12-hour dosing interval for a majority of patients and a 24-hour dosing interval for selected patients (see DOSAGE AND ADMINISTRATION section for description of appropriate patient populations). Each extended-release tablet for oral administration contains either 100 mg, 200 mg, 300 mg or 450 mg of anhydrous theophylline. Tablets also contain as inactive ingredients: hypromellose, anhydrous lactose, magnesium stearate and povidone.</Description>
</NDC>
<NDC>
<NDCCode>54868-0029-2</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (54868-0029-2)</PackageDescription>
<NDC11Code>54868-0029-02</NDC11Code>
<ProductNDC>54868-0029</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Theophylline</ProprietaryName>
<NonProprietaryName>Theophylline</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070917</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089763</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>THEOPHYLLINE ANHYDROUS</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Methylxanthine [EPC],Xanthines [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Theophylline extended-release tablets are indicated for the treatment of the symptoms and reversible airflow obstruction associated with chronic asthma and other chronic lung diseases, e.g., emphysema and chronic bronchitis.</IndicationAndUsage>
<Description>Theophylline is structurally classified as a methylxanthine. It occurs as a white, odorless, crystalline powder with a bitter taste. Anhydrous theophylline has the chemical name 1H-Purine-2,6-dione,3,7-dihydro-1,3-dimethyl-, and is represented by the following structural formula. C7H8N4O2 M.W. 180.17. This product allows a 12-hour dosing interval for a majority of patients and a 24-hour dosing interval for selected patients (see DOSAGE AND ADMINISTRATION section for description of appropriate patient populations). Each extended-release tablet for oral administration contains either 100 mg, 200 mg, 300 mg or 450 mg of anhydrous theophylline. Tablets also contain as inactive ingredients: hypromellose, anhydrous lactose, magnesium stearate and povidone.</Description>
</NDC>
<NDC>
<NDCCode>54868-0033-2</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (54868-0033-2)</PackageDescription>
<NDC11Code>54868-0033-02</NDC11Code>
<ProductNDC>54868-0033</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dicyclomine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dicyclomine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19951026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA084285</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>DICYCLOMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Dicyclomine hydrochloride tablets and capsules are indicated for the treatment of functional bowel/ irritable bowel syndrome.</IndicationAndUsage>
<Description>Dicyclomine hydrochloride is an antispasmodic and anticholinergic (antimuscarinic) agent available in the following forms. 1. Dicyclomine Hydrochloride Tablets USP, for oral administration, contain 20 mg dicyclomine hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: acacia, pregelatinized starch, anhydrous lactose, compressible sugar, dicalcium phosphate, colloidal silicon dioxide, magnesium stearate, stearic acid, and FD & C Blue #1 Aluminum Lake. 2. Dicyclomine Hydrochloride Capsules USP, for oral administration, contain 10 mg of dicyclomine hydrochloride, USP. In addition, each capsule contains the following inactive ingredients: lactose monohydrate, calcium sulfate, magnesium stearate; and the capsules shells contain: gelatin, FD&C Blue # 1, and FD&C Red # 3. Chemically, dicyclomine hydrochloride is 2-(Diethylamino)ethyl [bicyclohexyl]-1-carboxylate hydrochloride with the structural formula. Dicyclomine hydrochloride occurs as a fine, white, crystalline, practically odorless powder with a bitter taste. It is soluble in water, freely soluble in alcohol and chloroform, and very slightly soluble in ether.</Description>
</NDC>
<NDC>
<NDCCode>54868-0034-2</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (54868-0034-2)</PackageDescription>
<NDC11Code>54868-0034-02</NDC11Code>
<ProductNDC>54868-0034</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoclopramide</ProprietaryName>
<NonProprietaryName>Metoclopramide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078807</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>METOCLOPRAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine D2 Antagonists [MoA],Dopamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>The use of metoclopramide tablets is recommended for adults only. Therapy should not exceed 12 weeks in duration. Metoclopramide tablets are indicated as short-term (4 to 12 weeks) therapy for adults with symptomatic, documented gastroesophageal reflux who fail to respond to conventional therapy. The principal effect of metoclopramide is on symptoms of postprandial and daytime heartburn with less observed effect on nocturnal symptoms. If symptoms are confined to particular situations, such as following the evening meal, use of metoclopramide as single doses prior to the provocative situation should be considered, rather than using the drug throughout the day. Healing of esophageal ulcers and erosions has been endoscopically demonstrated at the end of a 12-week trial using doses of 15 mg q.i.d. As there is no documented correlation between symptoms and healing of esophageal lesions, patients with documented lesions should be monitored endoscopically. Metoclopramide tablets, are indicated for the relief of symptoms associated with acute and recurrent diabetic gastric stasis. The usual manifestations of delayed gastric emptying (e.g., nausea, vomiting, heartburn, persistent fullness after meals, and anorexia) appear to respond to metoclopramide tablets within different time intervals. Significant relief of nausea occurs early and continues to improve over a three-week period. Relief of vomiting and anorexia may precede the relief of abdominal fullness by one week or more.</IndicationAndUsage>
<Description>For oral administration, Metoclopramide tablets, USP 10 mg are white to off white, capsule shaped, biconvex tablets with "RF11" embossed on one side and score line on the other side. Each tablet contains. 10 mg of metoclopramide base as metoclopramide hydrochloride USP.</Description>
</NDC>
<NDC>
<NDCCode>54868-0038-2</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (54868-0038-2)</PackageDescription>
<NDC11Code>54868-0038-02</NDC11Code>
<ProductNDC>54868-0038</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temazepam</ProprietaryName>
<NonProprietaryName>Temazepam</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070920</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>TEMAZEPAM</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Temazepam is indicated for the short-term treatment of insomnia (generally 7 to 10 days). For patients with short-term insomnia, instructions in the prescription should indicate that temazepam should be used for short periods of time (7 to 10 days). The clinical trials performed in support of efficacy were 2 weeks in duration with the final formal assessment of sleep latency performed at the end of treatment.</IndicationAndUsage>
<Description>Temazepam is a benzodiazepine hypnotic agent. The chemical name is 7-chloro-1,3-dihydro-3-hydroxy-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. Its structural formula may be represented as follows. C16H13ClN2O2 M.W. = 300.74. Temazepam, USP is a white, crystalline substance, very slightly soluble in water and sparingly soluble in alcohol. Temazepam capsules, 15 mg, 22.5 mg and 30 mg, are for oral administration. Each capsule contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, powdered cellulose and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>54868-0039-2</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (54868-0039-2)</PackageDescription>
<NDC11Code>54868-0039-02</NDC11Code>
<ProductNDC>54868-0039</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temazepam</ProprietaryName>
<NonProprietaryName>Temazepam</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070920</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>TEMAZEPAM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Temazepam is indicated for the short-term treatment of insomnia (generally 7 to 10 days). For patients with short-term insomnia, instructions in the prescription should indicate that temazepam should be used for short periods of time (7 to 10 days). The clinical trials performed in support of efficacy were 2 weeks in duration with the final formal assessment of sleep latency performed at the end of treatment.</IndicationAndUsage>
<Description>Temazepam is a benzodiazepine hypnotic agent. The chemical name is 7-chloro-1,3-dihydro-3-hydroxy-1-methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. Its structural formula may be represented as follows. C16H13ClN2O2 M.W. = 300.74. Temazepam, USP is a white, crystalline substance, very slightly soluble in water and sparingly soluble in alcohol. Temazepam capsules, 15 mg, 22.5 mg and 30 mg, are for oral administration. Each capsule contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, powdered cellulose and sodium lauryl sulfate.</Description>
</NDC>
<NDC>
<NDCCode>54868-0042-2</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (54868-0042-2)</PackageDescription>
<NDC11Code>54868-0042-02</NDC11Code>
<ProductNDC>54868-0042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dipyridamole</ProprietaryName>
<NonProprietaryName>Dipyridamole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090807</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088999</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>DIPYRIDAMOLE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE],Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-02-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>54868-0043-2</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (54868-0043-2)</PackageDescription>
<NDC11Code>54868-0043-02</NDC11Code>
<ProductNDC>54868-0043</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dipyridamole</ProprietaryName>
<NonProprietaryName>Dipyridamole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089000</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>DIPYRIDAMOLE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE],Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-02-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>54868-0044-2</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (54868-0044-2)</PackageDescription>
<NDC11Code>54868-0044-02</NDC11Code>
<ProductNDC>54868-0044</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dipyridamole</ProprietaryName>
<NonProprietaryName>Dipyridamole</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090608</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089001</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>DIPYRIDAMOLE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE],Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-02-19</LastUpdate>
</NDC>
<NDC>
<NDCCode>54868-0048-2</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (54868-0048-2)</PackageDescription>
<NDC11Code>54868-0048-02</NDC11Code>
<ProductNDC>54868-0048</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Clonidine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20011003</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070925</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>CLONIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clonidine hydrochloride USP tablets are indicated in the treatment of hypertension. Clonidine hydrochloride USP tablets may be employed alone or concomitantly with other antihypertensive agents.</IndicationAndUsage>
<Description>Clonidine hydrochloride USP is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. Clonidine hydrochloride tablets contain the following inactive ingredients: lactose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. The 0.1 mg also contains D&C yellow #10 aluminum lake, and the 0.3 mg contains D&C yellow #10 aluminum lake and FD&C blue #1 aluminum lake. Clonidine hydrochloride is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. Clonidine hydrochloride is an odorless, bitter, white, crystalline substance soluble in water and alcohol.</Description>
</NDC>
<NDC>
<NDCCode>54868-0049-2</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (54868-0049-2)</PackageDescription>
<NDC11Code>54868-0049-02</NDC11Code>
<ProductNDC>54868-0049</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clonidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Clonidine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070924</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>CLONIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA],Central alpha-2 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clonidine hydrochloride USP tablets are indicated in the treatment of hypertension. Clonidine hydrochloride USP tablets may be employed alone or concomitantly with other antihypertensive agents.</IndicationAndUsage>
<Description>Clonidine hydrochloride USP is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. Clonidine hydrochloride tablets contain the following inactive ingredients: lactose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and sodium starch glycolate. The 0.1 mg also contains D&C yellow #10 aluminum lake, and the 0.3 mg contains D&C yellow #10 aluminum lake and FD&C blue #1 aluminum lake. Clonidine hydrochloride is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula. Clonidine hydrochloride is an odorless, bitter, white, crystalline substance soluble in water and alcohol.</Description>
</NDC>
<NDC>
<NDCCode>54868-0050-2</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (54868-0050-2)</PackageDescription>
<NDC11Code>54868-0050-02</NDC11Code>
<ProductNDC>54868-0050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methyldopa</ProprietaryName>
<NonProprietaryName>Methyldopa</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070098</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>METHYLDOPA</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension.</IndicationAndUsage>
<Description>Methyldopa USP is an antihypertensive drug. Methyldopa USP is the L-isomer of alpha-methyldopa. Its chemical name is levo-3-(3,4-dihydroxyphenyl)- 2-methylalanine sesquihydrate. Its structural formula is. C 10H13NO4 1 1/2 H2O M.W. 238.24. Methyldopa USP is a white to yellowish white, odorless fine powder and is sparingly soluble in water. Each tablet, for oral administration, contains 250 mg or 500 mg of methyldopa USP. Potency is calculated in the anhydrous basis. Inactive ingredients: citric acid, colloidal silicon dioxide, edetate disodium, ethylcellulose, hypromellose, magnesium stearate, methylcellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide. In addition, the 250 mg tablet contains calcium sulfate, hydroxypropyl cellulose, and talc, and the 500 mg tablet contains polysorbate 80.</Description>
</NDC>
</NDCList>