RESTful Lookup — Test-Drive (2007 – 2026)

{
  "NDC": [
    {
      "NDCCode": "55150-235-11",
      "PackageDescription": "10 VIAL in 1 CARTON (55150-235-11)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (55150-235-02) ",
      "NDC11Code": "55150-0235-11",
      "ProductNDC": "55150-235",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vecuronium Bromide",
      "NonProprietaryName": "Vecuronium Bromide",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20181220",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA206670",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "VECURONIUM BROMIDE",
      "StrengthNumber": "10",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-01-22",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20181220",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vecuronium bromide for injection is indicated as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
      "Description": "Vecuronium Bromide for Injection is a nondepolarizing neuromuscular blocking agent of intermediate duration, chemically designated as 1-(3α,17β-Dihydroxy-2β-piperidino-5α-androstan-16β,5α-yl)-1-methylpiperidinium bromide, diacetate. Vecuronium Bromide USP is a white or creamy white crystalline powder. The structural formula is: Its chemical formula is C34H57BrN2O4 with molecular weight 637.75. Vecuronium Bromide for Injection is supplied as a sterile, nonpyrogenic, white to off-white lyophilized cake or powder for intravenous injection only. Each 10 mL vial contains 10 mg of vecuronium bromide USP, 20.75 mg citric acid anhydrous, 16.25 mg dibasic sodium phosphate anhydrous, 97 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH range of 3.5 to 4.5. Each 20 mL vial contains 20 mg of vecuronium bromide USP, 41.5 mg citric acid anhydrous, 32.5 mg dibasic sodium phosphate anhydrous, 194 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH range of 3.5 to 4.5."
    },
    {
      "NDCCode": "55150-235-10",
      "PackageDescription": "10 VIAL in 1 CARTON (55150-235-10)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (55150-235-01) ",
      "NDC11Code": "55150-0235-10",
      "ProductNDC": "55150-235",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vecuronium Bromide",
      "NonProprietaryName": "Vecuronium Bromide",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20181220",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA206670",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "VECURONIUM BROMIDE",
      "StrengthNumber": "10",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
      "Status": "Active",
      "LastUpdate": "2023-12-08",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20181220",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vecuronium bromide for injection is indicated as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
      "Description": "Vecuronium Bromide for Injection is a nondepolarizing neuromuscular blocking agent of intermediate duration, chemically designated as 1-(3α,17β-Dihydroxy-2β-piperidino-5α-androstan-16β,5α-yl)-1-methylpiperidinium bromide, diacetate. Vecuronium Bromide USP is a white or creamy white crystalline powder. The structural formula is: Its chemical formula is C34H57BrN2O4 with molecular weight 637.75. Vecuronium Bromide for Injection is supplied as a sterile, nonpyrogenic, white to off-white lyophilized cake or powder for intravenous injection only. Each 10 mL vial contains 10 mg of vecuronium bromide USP, 20.75 mg citric acid anhydrous, 16.25 mg dibasic sodium phosphate anhydrous, 97 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH range of 3.5 to 4.5. Each 20 mL vial contains 20 mg of vecuronium bromide USP, 41.5 mg citric acid anhydrous, 32.5 mg dibasic sodium phosphate anhydrous, 194 mg mannitol (to adjust tonicity), sodium hydroxide and/or phosphoric acid to buffer and adjust to a pH range of 3.5 to 4.5."
    },
    {
      "NDCCode": "55150-154-11",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55150-154-11)  > 10 mL in 1 VIAL, SINGLE-DOSE",
      "NDC11Code": "55150-0154-11",
      "ProductNDC": "55150-154",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Acyclovir Sodium",
      "NonProprietaryName": "Acyclovir Sodium",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20131011",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203701",
      "LabelerName": "AuroMedics Pharma LLC",
      "SubstanceName": "ACYCLOVIR SODIUM",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/10mL",
      "Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
      "Status": "Active",
      "LastUpdate": "2018-11-15",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20131011",
      "SamplePackage": "N",
      "IndicationAndUsage": "Acyclovir Sodium Injection is indicated for the treatment of initial and recurrent mucosal and cutaneous herpes simplex (HSV-1 and HSV-2) in immunocompromised patients.",
      "Description": "Acyclovir Sodium Injection is a synthetic nucleoside analog, active against herpes viruses. It is a sterile, aqueous solution for intravenous infusion, containing 50 mg acyclovir per mL in Water for Injection, USP. The concentration is equivalent to 54.9 mg of acyclovir sodium per mL in Water for Injection, USP. The sodium content is approximately 5.1 mg/mL. The pH range of the solution is 10.85 to 11.50. Further dilution of Acyclovir Sodium Injection in an appropriate intravenous solution must be performed before infusion (see DOSAGE AND ADMINISTRATION, Administration). The chemical name of acyclovir sodium is 9-[(2-Hydroxyethoxy)methyl] guanine, and has the following structural formula. Acyclovir USP is a white to off-white, crystalline powder. Acyclovir sodium is the sodium salt of acyclovir, which is formed in situ, with the molecular formula C8H10N5NaO3 and a molecular weight of 247.19. The maximum solubility in water at 25°C exceeds 100 mg/mL. At physiologic pH, acyclovir sodium exists as the unionized form with a molecular weight of 225 and a maximum solubility in water at 37°C of 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25."
    },
    {
      "NDCCode": "55150-183-11",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55150-183-11)  / 10 mL in 1 VIAL, SINGLE-DOSE (55150-183-02) ",
      "NDC11Code": "55150-0183-11",
      "ProductNDC": "55150-183",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Nicardipine Hydrochloride",
      "NonProprietaryName": "Nicardipine Hydrochloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20210408",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA211121",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "NICARDIPINE HYDROCHLORIDE",
      "StrengthNumber": "25",
      "StrengthUnit": "mg/10mL",
      "Pharm_Classes": "Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
      "Status": "Active",
      "LastUpdate": "2025-05-10",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20210408",
      "SamplePackage": "N",
      "IndicationAndUsage": "Nicardipine hydrochloride injection is a calcium channel blocker indicated for the short-term treatment of hypertension when oral therapy is not feasible. (1.1).",
      "Description": "Nicardipine hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride injection, USP for intravenous administration contains 2.5 mg/mL of nicardipine hydrochloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-­dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure: Nicardipine hydrochloride is a pale greenish yellow crystalline powder that melts at about 169°C. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. Nicardipine hydrochloride injection, USP is available as a sterile, non-pyrogenic, clear, yellow colored solution in 10 mL vials for intravenous infusion after dilution. Each mL contains 2.5 mg nicardipine hydrochloride in Water for Injection, USP with 48.00 mg Sorbitol, NF, buffered to pH 3.5 with 0.525 mg citric acid monohydrate, USP and 0.09 mg sodium hydroxide, NF. Additional citric acid and/or sodium hydroxide may have been added to adjust pH."
    },
    {
      "NDCCode": "13709-235-11",
      "PackageDescription": "75 mL in 1 CAN (13709-235-11) ",
      "NDC11Code": "13709-0235-11",
      "ProductNDC": "13709-235",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Wound Wash Antiseptic Saline With Benzalkonium Chloride",
      "NonProprietaryName": "Wound Wash Antiseptic Saline With Benzalkonium Chloride",
      "DosageFormName": "AEROSOL, SPRAY",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20170102",
      "MarketingCategoryName": "OTC MONOGRAPH DRUG",
      "ApplicationNumber": "M004",
      "LabelerName": "NeilMed Pharmaceuticals, Inc.",
      "SubstanceName": "BENZALKONIUM CHLORIDE",
      "StrengthNumber": "1.3",
      "StrengthUnit": "mg/mL",
      "Status": "Active",
      "LastUpdate": "2026-08-07",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260805",
      "SamplePackage": "N",
      "IndicationAndUsage": "First Aid Antiseptic. First aid to cleanse minor cuts, wounds and scrapes."
    },
    {
      "NDCCode": "13710-235-11",
      "PackageDescription": "1.3 mL in 1 CAN (13710-235-11) ",
      "NDC11Code": "13710-0235-11",
      "ProductNDC": "13710-235",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Neil Cleanse Wound Wash Antiseptic Sterile Saline With Benzalkonium Chloride",
      "ProprietaryNameSuffix": "Neilmed",
      "NonProprietaryName": "Wound Wash Antiseptic Sterile Saline With Benzalkonium Chloride",
      "DosageFormName": "AEROSOL, SPRAY",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20170102",
      "EndMarketingDate": "20210531",
      "MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
      "ApplicationNumber": "part333A",
      "LabelerName": "NeilMed Pharmaceuticals, Inc.",
      "SubstanceName": "BENZALKONIUM CHLORIDE",
      "StrengthNumber": "1.3",
      "StrengthUnit": "mg/mL",
      "Status": "Deprecated",
      "LastUpdate": "2021-06-02",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20170102",
      "EndMarketingDatePackage": "20210531",
      "SamplePackage": "N"
    },
    {
      "NDCCode": "50102-235-11",
      "PackageDescription": "1 BLISTER PACK in 1 CARTON (50102-235-11)  / 1 KIT in 1 BLISTER PACK",
      "NDC11Code": "50102-0235-11",
      "ProductNDC": "50102-235",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vylibra",
      "NonProprietaryName": "Norgestimate And Ethinyl Estradiol",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20160707",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA205449",
      "LabelerName": "Afaxys Pharma, LLC",
      "Status": "Active",
      "LastUpdate": "2025-01-17",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20160707",
      "SamplePackage": "N",
      "IndicationAndUsage": "VyLibra is a combination of norgestimate, a progestin, and ethinyl estradiol, an estrogen, indicated for use by females of reproductive potential to prevent pregnancy. (1.1).",
      "Description": "VyLibra is a combination oral contraceptive containing the progestational compound norgestimate and the estrogenic compound ethinyl estradiol. Norgestimate is designated as (18,19-Dinor-17-pregn-4-en-20-yn-3-one,17-(acetyloxy)-13-ethyl-, oxime,(17α)-(+)-) and ethinyl estradiol is designated as (19-nor-17α-pregna,1,3,5(10)-trien-20-yne-3,17-diol)."
    },
    {
      "NDCCode": "58767-722-11",
      "PackageDescription": "235 mL in 1 BOTTLE, DISPENSING (58767-722-11)",
      "NDC11Code": "58767-0722-11",
      "ProductNDC": "58767-722",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Cederroth Emergency Eye Wash",
      "NonProprietaryName": "Water",
      "DosageFormName": "LIQUID",
      "RouteName": "OPHTHALMIC",
      "StartMarketingDate": "20140313",
      "MarketingCategoryName": "OTC MONOGRAPH FINAL",
      "ApplicationNumber": "part349",
      "LabelerName": "Cederroth AB",
      "SubstanceName": "WATER",
      "StrengthNumber": "99",
      "StrengthUnit": "mL/100mL",
      "Status": "Deprecated",
      "LastUpdate": "2017-12-20",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20171231"
    },
    {
      "NDCCode": "60687-235-01",
      "PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (60687-235-01)  > 1 CAPSULE, DELAYED RELEASE in 1 BLISTER PACK (60687-235-11) ",
      "NDC11Code": "60687-0235-01",
      "ProductNDC": "60687-235",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Esomeprazole Magnesium",
      "NonProprietaryName": "Esomeprazole Magnesium",
      "DosageFormName": "CAPSULE, DELAYED RELEASE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170322",
      "EndMarketingDate": "20190331",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078279",
      "LabelerName": "American Health Packaging",
      "SubstanceName": "ESOMEPRAZOLE MAGNESIUM",
      "StrengthNumber": "20",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2019-04-02",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "StartMarketingDatePackage": "20170322",
      "EndMarketingDatePackage": "20190331",
      "SamplePackage": "N"
    },
    {
      "NDCCode": "68084-235-01",
      "PackageDescription": "10 BLISTER PACK in 1 CARTON (68084-235-01)  > 10 TABLET in 1 BLISTER PACK (68084-235-11)",
      "NDC11Code": "68084-0235-01",
      "ProductNDC": "68084-235",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Amoxicillin And Calvulanate Potassium",
      "NonProprietaryName": "Amoxicillin And Clavulanate Potassium",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20091211",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065109",
      "LabelerName": "American Health Packaging",
      "SubstanceName": "AMOXICILLIN; CLAVULANIC ACID",
      "StrengthNumber": "500; 125",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "beta Lactamase Inhibitor [EPC],beta Lactamase Inhibitors [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2015-07-17"
    },
    {
      "NDCCode": "68428-235-11",
      "PackageDescription": "300 PELLET in 1 BOTTLE, GLASS (68428-235-11) ",
      "NDC11Code": "68428-0235-11",
      "ProductNDC": "68428-235",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Astacus Fluviatilis",
      "NonProprietaryName": "Astacus Astacus",
      "DosageFormName": "PELLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20101112",
      "MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
      "LabelerName": "Washington Homeopathic Products",
      "SubstanceName": "ASTACUS ASTACUS",
      "StrengthNumber": "30",
      "StrengthUnit": "[hp_C]/1",
      "Status": "Deprecated",
      "LastUpdate": "2022-04-08",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20221231",
      "StartMarketingDatePackage": "20101112",
      "SamplePackage": "N"
    },
    {
      "NDCCode": "68462-235-11",
      "PackageDescription": "10 BLISTER PACK in 1 CARTON (68462-235-11)  / 10 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
      "NDC11Code": "68462-0235-11",
      "ProductNDC": "68462-235",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Felodipine",
      "NonProprietaryName": "Felodipine",
      "DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20101220",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA090365",
      "LabelerName": "Glenmark Pharmaceuticals Inc., USA",
      "SubstanceName": "FELODIPINE",
      "StrengthNumber": "10",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Calcium Channel Antagonists [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
      "Status": "Active",
      "LastUpdate": "2026-01-27",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20101220",
      "SamplePackage": "N",
      "IndicationAndUsage": "Felodipine tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including felodipine. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (eg, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Felodipine tablets may be administered with other antihypertensive agents.",
      "Description": "Felodipine extended-release tablets USP are a calcium antagonist (calcium channel blocker). Felodipine is a dihydropyridine derivative that is chemically described as ± ethyl methyl 4-(2,3-dichlorophenyl)-1,4-dihydro-2,6-dimethyl-3,5-pyridinedicarboxylate. Its molecular formula is C18H19Cl2NO4 and its structural formula is. Felodipine USP is a slightly yellowish, crystalline powder with a molecular weight of 384.26. It is insoluble in water and is freely soluble in dichloromethane and ethanol. Felodipine is a racemic mixture. Felodipine extended-release tablets provide extended-release of felodipine. They are available as tablets containing 2.5 mg, 5 mg, or 10 mg of felodipine for oral administration. In addition to the active ingredient felodipine, the felodipine extended-release tablets 2.5 mg, 5 mg and 10 mg contain the following inactive ingredients: hydroxypropyl cellulose, hypromellose, kaolin, lactose monohydrate, microcrystalline cellulose, polyoxyl 40 hydrogenated castor oil, sodium stearyl fumarate, Opadry Green 20B51525 (2.5 mg), Opadry Pink 20B84706 (5 mg) and Opadry Red 20B55372 (10 mg). Opadry Green 20B51525 consists of hypromellose, hydroxypropyl cellulose, macrogol, titanium dioxide, D&C Yellow No. 10 Aluminium Lake, FD&C Blue No. 2 Aluminium Lake and ferric oxide yellow. Opadry Pink 20B84706 consists of hypromellose, hydroxypropyl cellulose, macrogol, titanium dioxide, ferric oxide red and ferric oxide yellow. Opadry Red 20B55372 consists of hypromellose, hydroxypropyl cellulose, macrogol, titanium dioxide, ferric oxide red and ferric oxide yellow."
    },
    {
      "NDCCode": "69710-235-11",
      "PackageDescription": "1 BOTTLE in 1 CARTON (69710-235-11)  / 5 mL in 1 BOTTLE",
      "NDC11Code": "69710-0235-11",
      "ProductNDC": "69710-235",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Symbio Tilis Drops",
      "NonProprietaryName": "Bacillus Subtilis",
      "DosageFormName": "LIQUID",
      "RouteName": "ORAL",
      "StartMarketingDate": "20231008",
      "MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
      "LabelerName": "Symbiopathic",
      "SubstanceName": "BACILLUS SUBTILIS",
      "StrengthNumber": "6",
      "StrengthUnit": "[hp_X]/mL",
      "Status": "Active",
      "LastUpdate": "2025-10-13",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20231008",
      "SamplePackage": "N",
      "IndicationAndUsage": "This remedy is indicated for symptoms associated with skin and lung conditions, stomach and intestinal imbalance, rheumatism symptoms, skin allergies, and other internal conditions according to traditional homeopathic practice.*."
    },
    {
      "NDCCode": "69711-235-11",
      "PackageDescription": "1 BOTTLE in 1 CARTON (69711-235-11)  / 5 mL in 1 BOTTLE",
      "NDC11Code": "69711-0235-11",
      "ProductNDC": "69711-235",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Symbio Tilis Drops",
      "NonProprietaryName": "Bacillus Subtilis",
      "DosageFormName": "LIQUID",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160825",
      "MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
      "LabelerName": "Symbiopathic",
      "SubstanceName": "BACILLUS SUBTILIS",
      "StrengthNumber": "6",
      "StrengthUnit": "[hp_X]/mL",
      "Status": "Deprecated",
      "LastUpdate": "2024-07-31",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20241231",
      "StartMarketingDatePackage": "20160825",
      "SamplePackage": "N",
      "IndicationAndUsage": "This remedy is indicated for symptoms associated with skin and lung conditions, stomach and intestinal imbalance, rheumatism symptoms, skin allergies, and other internal conditions according to traditional homeopathic practice.*."
    },
    {
      "NDCCode": "76147-235-11",
      "PackageDescription": "1 JAR in 1 BOX (76147-235-11)  / 50 mL in 1 JAR",
      "NDC11Code": "76147-0235-11",
      "ProductNDC": "76147-235",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Strivectin Multi-action Super-c Spf 30",
      "NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene",
      "DosageFormName": "CREAM",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20210422",
      "MarketingCategoryName": "OTC MONOGRAPH DRUG",
      "ApplicationNumber": "M020",
      "LabelerName": "StriVectin Operating Company, Inc.",
      "SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE",
      "StrengthNumber": "3; 7; 4.5; 10",
      "StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL",
      "Status": "Active",
      "LastUpdate": "2025-12-16",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20210422",
      "SamplePackage": "N",
      "IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
    },
    {
      "NDCCode": "55150-116-10",
      "PackageDescription": "10 VIAL in 1 CARTON (55150-116-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
      "NDC11Code": "55150-0116-10",
      "ProductNDC": "55150-116",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ampicillin And Sulbactam",
      "NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
      "DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20120210",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA090349",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
      "StrengthNumber": "1; .5",
      "StrengthUnit": "g/1; g/1",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2025-11-07",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20120210",
      "SamplePackage": "N",
      "IndicationAndUsage": "Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,* Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis,* Bacteroides fragilis,* Enterobacter spp.,* and Acinetobacter calcoaceticus.*NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*  Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,* and Bacteroides spp.* (including B. fragilis*). * Efficacy for this organism in this organ system was studied in fewer than 10 infections.While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibacterial.Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection.Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate.To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
      "Description": "Ampicillin and sulbactam for injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration.Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3, 3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3, 3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4, 4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and sulbactam for injection, USP parenteral combination, is available as a white to off-white, crystalline powder for reconstitution. Ampicillin and sulbactam for injection, USP crystalline powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same.1.5 g of ampicillin and sulbactam for injection, USP (equivalent to 1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt). The sodium content per vial is 115 mg (5 mEq).3 g of ampicillin and sulbactam for injection, USP (equivalent to 2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt). The sodium content per vial is 230 mg (10 mEq)."
    },
    {
      "NDCCode": "55150-117-10",
      "PackageDescription": "10 VIAL in 1 CARTON (55150-117-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
      "NDC11Code": "55150-0117-10",
      "ProductNDC": "55150-117",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ampicillin And Sulbactam",
      "NonProprietaryName": "Ampicillin Sodium And Sulbactam Sodium",
      "DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20120210",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA090349",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "AMPICILLIN SODIUM; SULBACTAM SODIUM",
      "StrengthNumber": "2; 1",
      "StrengthUnit": "g/1; g/1",
      "Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2025-11-07",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20120210",
      "SamplePackage": "N",
      "IndicationAndUsage": "Ampicillin and sulbactam for injection is indicated for the treatment of infections due to susceptible strains of the designated microorganisms in the conditions listed below. Skin and Skin Structure Infections caused by beta-lactamase producing strains of Staphylococcus aureus, Escherichia coli,* Klebsiella spp.* (including K. pneumoniae*), Proteus mirabilis,* Bacteroides fragilis,* Enterobacter spp.,* and Acinetobacter calcoaceticus.*NOTE: For information on use in pediatric patients (see PRECAUTIONS–Pediatric Use and CLINICAL STUDIES sections). Intra-Abdominal Infections caused by beta-lactamase producing strains of Escherichia coli, Klebsiella spp. (including K. pneumoniae*), Bacteroides spp. (including B. fragilis), and Enterobacter spp.*  Gynecological Infections caused by beta-lactamase producing strains of Escherichia coli,* and Bacteroides spp.* (including B. fragilis*). * Efficacy for this organism in this organ system was studied in fewer than 10 infections.While ampicillin and sulbactam for injection is indicated only for the conditions listed above, infections caused by ampicillin-susceptible organisms are also amenable to treatment with ampicillin and sulbactam for injection due to its ampicillin content. Therefore, mixed infections caused by ampicillin-susceptible organisms and beta-lactamase producing organisms susceptible to ampicillin and sulbactam for injection should not require the addition of another antibacterial.Appropriate culture and susceptibility tests should be performed before treatment in order to isolate and identify the organisms causing infection and to determine their susceptibility to ampicillin and sulbactam for injection.Therapy may be instituted prior to obtaining the results from bacteriological and susceptibility studies when there is reason to believe the infection may involve any of the beta-lactamase producing organisms listed above in the indicated organ systems. Once the results are known, therapy should be adjusted if appropriate.To reduce the development of drug-resistant bacteria and maintain effectiveness of ampicillin and sulbactam for injection and other antibacterial drugs, ampicillin and sulbactam for injection should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
      "Description": "Ampicillin and sulbactam for injection, USP is an injectable antibacterial combination consisting of the semisynthetic antibacterial ampicillin sodium and the beta-lactamase inhibitor sulbactam sodium for intravenous and intramuscular administration.Ampicillin sodium is derived from the penicillin nucleus, 6-aminopenicillanic acid. Chemically, it is monosodium (2S, 5R, 6R)-6-[(R)-2-amino-2-phenylacetamido]-3, 3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate and has a molecular weight of 371.39. Its chemical formula is C16H18N3NaO4S. The structural formula is. Sulbactam sodium is a derivative of the basic penicillin nucleus. Chemically, sulbactam sodium is sodium penicillinate sulfone; sodium (2S, 5R)-3, 3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0] heptane-2-carboxylate 4, 4-dioxide. Its chemical formula is C8H10NNaO5S with a molecular weight of 255.22. The structural formula is. Ampicillin and sulbactam for injection, USP parenteral combination, is available as a white to off-white, crystalline powder for reconstitution. Ampicillin and sulbactam for injection, USP crystalline powder is freely soluble in aqueous diluents to yield pale yellow to yellow solutions containing ampicillin sodium and sulbactam sodium equivalent to 250 mg ampicillin per mL and 125 mg sulbactam per mL. The pH of the solutions is between 8 and 10. Dilute solutions (up to 30 mg ampicillin and 15 mg sulbactam per mL) are essentially colorless to pale yellow. The pH of dilute solutions remains the same.1.5 g of ampicillin and sulbactam for injection, USP (equivalent to 1 g ampicillin as the sodium salt plus 0.5 g sulbactam as the sodium salt). The sodium content per vial is 115 mg (5 mEq).3 g of ampicillin and sulbactam for injection, USP (equivalent to 2 g ampicillin as the sodium salt plus 1 g sulbactam as the sodium salt). The sodium content per vial is 230 mg (10 mEq)."
    },
    {
      "NDCCode": "55150-154-10",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55150-154-10)  / 10 mL in 1 VIAL, SINGLE-DOSE",
      "NDC11Code": "55150-0154-10",
      "ProductNDC": "55150-154",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Acyclovir Sodium",
      "NonProprietaryName": "Acyclovir Sodium",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20131011",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203701",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "ACYCLOVIR SODIUM",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/10mL",
      "Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
      "Status": "Active",
      "LastUpdate": "2023-07-06",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20131011",
      "SamplePackage": "N",
      "IndicationAndUsage": "Acyclovir Sodium Injection is indicated for the treatment of initial and recurrent mucosal and cutaneous herpes simplex (HSV-1 and HSV-2) in immunocompromised patients.",
      "Description": "Acyclovir Sodium Injection is a synthetic nucleoside analog, active against herpes viruses. It is a sterile, aqueous solution for intravenous infusion, containing 50 mg acyclovir per mL in Water for Injection, USP. The concentration is equivalent to 54.9 mg of acyclovir sodium per mL in Water for Injection, USP. The sodium content is approximately 5.1 mg/mL. The pH range of the solution is 10.85 to 11.50. Further dilution of Acyclovir Sodium Injection in an appropriate intravenous solution must be performed before infusion (see DOSAGE AND ADMINISTRATION, Administration). The chemical name of acyclovir sodium is 9-[(2-Hydroxyethoxy)methyl] guanine, and has the following structural formula. Acyclovir USP is a white to off-white, crystalline powder. Acyclovir sodium is the sodium salt of acyclovir, which is formed in situ, with the molecular formula C8H10N5NaO3 and a molecular weight of 247.19. The maximum solubility in water at 25°C exceeds 100 mg/mL. At physiologic pH, acyclovir sodium exists as the unionized form with a molecular weight of 225 and a maximum solubility in water at 37°C of 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25."
    },
    {
      "NDCCode": "55150-155-20",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55150-155-20)  / 20 mL in 1 VIAL, SINGLE-DOSE",
      "NDC11Code": "55150-0155-20",
      "ProductNDC": "55150-155",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Acyclovir Sodium",
      "NonProprietaryName": "Acyclovir Sodium",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20131011",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203701",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "ACYCLOVIR SODIUM",
      "StrengthNumber": "1000",
      "StrengthUnit": "mg/20mL",
      "Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
      "Status": "Active",
      "LastUpdate": "2023-07-06",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20131011",
      "SamplePackage": "N",
      "IndicationAndUsage": "Acyclovir Sodium Injection is indicated for the treatment of initial and recurrent mucosal and cutaneous herpes simplex (HSV-1 and HSV-2) in immunocompromised patients.",
      "Description": "Acyclovir Sodium Injection is a synthetic nucleoside analog, active against herpes viruses. It is a sterile, aqueous solution for intravenous infusion, containing 50 mg acyclovir per mL in Water for Injection, USP. The concentration is equivalent to 54.9 mg of acyclovir sodium per mL in Water for Injection, USP. The sodium content is approximately 5.1 mg/mL. The pH range of the solution is 10.85 to 11.50. Further dilution of Acyclovir Sodium Injection in an appropriate intravenous solution must be performed before infusion (see DOSAGE AND ADMINISTRATION, Administration). The chemical name of acyclovir sodium is 9-[(2-Hydroxyethoxy)methyl] guanine, and has the following structural formula. Acyclovir USP is a white to off-white, crystalline powder. Acyclovir sodium is the sodium salt of acyclovir, which is formed in situ, with the molecular formula C8H10N5NaO3 and a molecular weight of 247.19. The maximum solubility in water at 25°C exceeds 100 mg/mL. At physiologic pH, acyclovir sodium exists as the unionized form with a molecular weight of 225 and a maximum solubility in water at 37°C of 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25."
    },
    {
      "NDCCode": "55150-155-21",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55150-155-21)  > 20 mL in 1 VIAL, SINGLE-DOSE",
      "NDC11Code": "55150-0155-21",
      "ProductNDC": "55150-155",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Acyclovir Sodium",
      "NonProprietaryName": "Acyclovir Sodium",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20131011",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203701",
      "LabelerName": "AuroMedics Pharma LLC",
      "SubstanceName": "ACYCLOVIR SODIUM",
      "StrengthNumber": "1000",
      "StrengthUnit": "mg/20mL",
      "Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
      "Status": "Active",
      "LastUpdate": "2018-11-15",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20131011",
      "SamplePackage": "N",
      "IndicationAndUsage": "Acyclovir Sodium Injection is indicated for the treatment of initial and recurrent mucosal and cutaneous herpes simplex (HSV-1 and HSV-2) in immunocompromised patients.",
      "Description": "Acyclovir Sodium Injection is a synthetic nucleoside analog, active against herpes viruses. It is a sterile, aqueous solution for intravenous infusion, containing 50 mg acyclovir per mL in Water for Injection, USP. The concentration is equivalent to 54.9 mg of acyclovir sodium per mL in Water for Injection, USP. The sodium content is approximately 5.1 mg/mL. The pH range of the solution is 10.85 to 11.50. Further dilution of Acyclovir Sodium Injection in an appropriate intravenous solution must be performed before infusion (see DOSAGE AND ADMINISTRATION, Administration). The chemical name of acyclovir sodium is 9-[(2-Hydroxyethoxy)methyl] guanine, and has the following structural formula. Acyclovir USP is a white to off-white, crystalline powder. Acyclovir sodium is the sodium salt of acyclovir, which is formed in situ, with the molecular formula C8H10N5NaO3 and a molecular weight of 247.19. The maximum solubility in water at 25°C exceeds 100 mg/mL. At physiologic pH, acyclovir sodium exists as the unionized form with a molecular weight of 225 and a maximum solubility in water at 37°C of 2.5 mg/mL. The pka’s of acyclovir are 2.27 and 9.25."
    },
    {
      "NDCCode": "55150-173-01",
      "PackageDescription": "5 VIAL, SINGLE-DOSE in 1 CARTON (55150-173-01)  / .5 mL in 1 VIAL, SINGLE-DOSE",
      "NDC11Code": "55150-0173-01",
      "ProductNDC": "55150-173",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Sumatriptan",
      "NonProprietaryName": "Sumatriptan",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "SUBCUTANEOUS",
      "StartMarketingDate": "20130423",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA202758",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "SUMATRIPTAN SUCCINATE",
      "StrengthNumber": "6",
      "StrengthUnit": "mg/.5mL",
      "Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-11-21",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20130423",
      "SamplePackage": "N",
      "IndicationAndUsage": "Sumatriptan injection is indicated in adults for (1) the acute treatment of migraine, with or without aura, and (2) the acute treatment of cluster headache. Limitations of Use: 1 Use only if a clear diagnosis of migraine or cluster headache has been established. If a patient has no response to the first migraine or cluster headache attack treated with sumatriptan injection, reconsider the diagnosis before sumatriptan injection is administered to treat any subsequent attacks., 2 Sumatriptan injection is not indicated for the prevention of migraine or cluster headache attacks.",
      "Description": "Sumatriptan Injection USP contains sumatriptan succinate, a selective 5-HT1B/1D receptor agonist. Sumatriptan succinate is chemically designated as 3-[2-(dimethylamino)ethyl]-N-methyl-indole-5-methanesulfonamide succinate (1:1), and it has the following structure. The molecular formula is C14H21N3O2SC4H6O4, representing a molecular weight of 413.5. Sumatriptan succinate USP is a white or almost white powder that is readily soluble in water and in saline. Sumatriptan injection USP is a clear, colorless to pale yellow, sterile, nonpyrogenic solution for subcutaneous injection. Each 0.5 mL of sumatriptan injection USP 12 mg/mL solution contains 8.4 mg of sumatriptan succinate equivalent to 6 mg of sumatriptan and 3.5 mg of sodium chloride, USP in Water for Injection, USP. The pH range of the solution is approximately 4.2 to 5.3. The osmolality of the injection is 291 mOsmol."
    },
    {
      "NDCCode": "55150-174-10",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55150-174-10)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE",
      "NDC11Code": "55150-0174-10",
      "ProductNDC": "55150-174",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Azithromycin",
      "NonProprietaryName": "Azithromycin",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20150619",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA203294",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "AZITHROMYCIN MONOHYDRATE",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-08-05",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20150619",
      "SamplePackage": "N",
      "IndicationAndUsage": "Azithromycin for injection is a macrolide antibacterial drug indicated for the treatment of the following infections caused by designated susceptible microorganisms: 1 Community-acquired pneumonia in adults (1.1), 2 Pelvic inflammatory disease in adults (1.2).",
      "Description": "Azithromycin for injection, USP contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibacterial drug, for intravenous injection. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-hepta-methyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749. Azithromycin has the following structural formula: Azithromycin, as the monohydrate, is a white to almost white crystalline powder with a molecular formula of C38H72N2O12H2O and a molecular weight of 767.02. Azithromycin for injection, USP is a sterile preparation consisting of azithromycin monohydrate USP and the following inactive ingredients: anhydrous citric acid and sodium hydroxide. Sodium hydroxide is added to adjust the pH. Azithromycin for injection, USP is supplied as white lyophilized cake in a single-dose vial for intravenous administration. Each vial contains azithromycin monohydrate equivalent to 500 mg of azithromycin, 413.6 mg anhydrous citric acid, and sodium hydroxide. Reconstitution, according to label directions, results in approximately 5 mL of azithromycin for intravenous injection with each mL containing 102.4 mg of azithromycin monohydrate USP equivalent to 100 mg of azithromycin, 82.72 mg of citric acid, and sodium hydroxide."
    },
    {
      "NDCCode": "55150-177-05",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55150-177-05)  / 5 mL in 1 VIAL, SINGLE-DOSE",
      "NDC11Code": "55150-0177-05",
      "ProductNDC": "55150-177",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Levetiracetam",
      "NonProprietaryName": "Levetiracetam",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20160201",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204312",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "LEVETIRACETAM",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/5mL",
      "Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
      "Status": "Active",
      "LastUpdate": "2025-11-29",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20160201",
      "SamplePackage": "N",
      "IndicationAndUsage": " Levetiracetam injection is indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1)  Levetiracetam injection is indicated for adjunctive therapy for the treatment of:   o Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2)   o Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).  Levetiracetam injection is for intravenous use only as an alternative for patients when oral administration is temporarily not feasible (1.4).",
      "Description": "Levetiracetam injection, USP is an antiepileptic drug available as a clear, colorless, sterile solution (100 mg/mL) for intravenous administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam USP is a white to off-white crystalline powder. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.). Levetiracetam injection, USP contains 100 mg of levetiracetam per mL. It is supplied in single-dose 5 mL vials containing 500 mg levetiracetam, water for injection, 45 mg sodium chloride, and buffered at approximately pH 5.5 with glacial acetic acid and 8.2 mg sodium acetate trihydrate. Levetiracetam injection, USP must be diluted prior to intravenous infusion [see Dosage and Administration (2.6)]."
    },
    {
      "NDCCode": "55150-180-03",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55150-180-03)  > 3 mL in 1 VIAL, SINGLE-DOSE",
      "NDC11Code": "55150-0180-03",
      "ProductNDC": "55150-180",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Amiodarone Hydrochloride",
      "NonProprietaryName": "Amiodarone Hydrochloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20171025",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204550",
      "LabelerName": "AuroMedics Pharma LLC",
      "SubstanceName": "AMIODARONE HYDROCHLORIDE",
      "StrengthNumber": "150",
      "StrengthUnit": "mg/3mL",
      "Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2021-12-11",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20171025",
      "SamplePackage": "N",
      "IndicationAndUsage": "Amiodarone hydrochloride injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.",
      "Description": "Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone hydrochloride USP is a white or almost white, fine crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection, USP is a sterile clear, pale yellow solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride USP, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection, USP contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)]."
    },
    {
      "NDCCode": "55150-181-09",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (55150-181-09)  > 9 mL in 1 VIAL, SINGLE-DOSE",
      "NDC11Code": "55150-0181-09",
      "ProductNDC": "55150-181",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Amiodarone Hydrochloride",
      "NonProprietaryName": "Amiodarone Hydrochloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20171025",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204550",
      "LabelerName": "AuroMedics Pharma LLC",
      "SubstanceName": "AMIODARONE HYDROCHLORIDE",
      "StrengthNumber": "450",
      "StrengthUnit": "mg/9mL",
      "Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2021-12-11",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20171025",
      "SamplePackage": "N",
      "IndicationAndUsage": "Amiodarone hydrochloride injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.",
      "Description": "Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone hydrochloride USP is a white or almost white, fine crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection, USP is a sterile clear, pale yellow solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride USP, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection, USP contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)]."
    },
    {
      "NDCCode": "55150-182-18",
      "PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (55150-182-18)  > 18 mL in 1 VIAL, MULTI-DOSE",
      "NDC11Code": "55150-0182-18",
      "ProductNDC": "55150-182",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Amiodarone Hydrochloride",
      "NonProprietaryName": "Amiodarone Hydrochloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20171025",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204550",
      "LabelerName": "AuroMedics Pharma LLC",
      "SubstanceName": "AMIODARONE HYDROCHLORIDE",
      "StrengthNumber": "900",
      "StrengthUnit": "mg/18mL",
      "Pharm_Classes": "Antiarrhythmic [EPC], Cytochrome P450 1A2 Inhibitors [MoA], Cytochrome P450 2C9 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2021-12-11",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20171025",
      "SamplePackage": "N",
      "IndicationAndUsage": "Amiodarone hydrochloride injection is indicated for initiation of treatment and prophylaxis of frequently recurring ventricular fibrillation (VF) and hemodynamically unstable ventricular tachycardia (VT) in patients refractory to other therapy. Amiodarone also can be used to treat patients with VT/VF for whom oral amiodarone is indicated, but who are unable to take oral medication. During or after treatment with amiodarone, patients may be transferred to oral amiodarone therapy [see Dosage and Administration (2)]. Use amiodarone for acute treatment until the patient's ventricular arrhythmias are stabilized. Most patients will require this therapy for 48 to 96 hours, but amiodarone may be safely administered for longer periods if necessary.",
      "Description": "Amiodarone hydrochloride injection, USP contains amiodarone hydrochloride (C25H29I2NO3HCl), a class III antiarrhythmic drug. Amiodarone hydrochloride is (2-butyl-3-benzo-furanyl)[4-[2-(diethylamino)ethoxy]-3,5-diiodophenyl]methanone hydrochloride. Amiodarone hydrochloride has the following structural formula. Amiodarone hydrochloride USP is a white or almost white, fine crystalline powder, and is very slightly soluble in water. It has a molecular weight of 681.78 and contains 37.3% iodine by weight. Amiodarone hydrochloride injection, USP is a sterile clear, pale yellow solution visually free from particulates. Each milliliter of the amiodarone formulation contains 50 mg of amiodarone hydrochloride USP, 20.2 mg of benzyl alcohol, 100 mg of polysorbate 80, and water for injection. Amiodarone hydrochloride injection, USP contains polysorbate 80, which is known to leach di-(2-ethylhexyl)phthalate (DEHP) from polyvinylchloride (PVC) [see Dosage and Administration (2)]."
    },
    {
      "NDCCode": "55150-185-05",
      "PackageDescription": "10 VIAL in 1 CARTON (55150-185-05)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL",
      "NDC11Code": "55150-0185-05",
      "ProductNDC": "55150-185",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Esomeprazole Sodium",
      "NonProprietaryName": "Esomeprazole Sodium",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20160810",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204657",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "ESOMEPRAZOLE SODIUM",
      "StrengthNumber": "40",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2025-11-27",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20160810",
      "SamplePackage": "N",
      "IndicationAndUsage": "Esomeprazole sodium for injection is a proton pump inhibitor (PPI) indicated for the: 1 Short-term treatment of Gastroesophageal Reflux Disease (GERD) with erosive esophagitis (EE) in adults and pediatric patients 1 month to 17 years of age, as an alternative to oral therapy when oral esomeprazole is not possible or appropriate. (1.1)  , 2 Risk reduction of rebleeding of gastric or duodenal ulcers following therapeutic endoscopy for acute bleeding gastric or duodenal ulcers in adults. (1.2).",
      "Description": "The active ingredient in esomeprazole sodium for injection is (S)-5-methoxy-2[[(4-methoxy-3,5-dimethyl-2-pyridinyl)-methyl]sulfinyl]-1 H-benzimidazole sodium, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R-isomers. Its molecular formula is C17H18N3O3SNa with molecular weight of 367.4 g/mol (sodium salt) and 345.4 g/mol (parent compound). Esomeprazole sodium is a white or almost white, hygroscopic powder. It is very soluble in water and freely soluble in ethanol (95%). The structural formula is:. Esomeprazole sodium for injection is supplied as a sterile, freeze-dried, white to off-white, porous cake or powder in a 5 mL single-dose vial, intended for intravenous administration after reconstitution with 0.9% Sodium Chloride Injection, USP; Lactated Ringer’s Injection, USP or 5% Dextrose Injection, USP. Esomeprazole sodium for injection contains 40 mg esomeprazole (equivalent to 42.5 mg esomeprazole sodium), edetate disodium 1.5 mg and sodium hydroxide q.s. for pH adjustment. The pH of reconstituted solution of esomeprazole sodium for injection depends on the reconstitution volume and is in the pH range of 9 to 11. The stability of esomeprazole sodium in aqueous solution is strongly pH dependent. The rate of degradation increases with decreasing pH."
    },
    {
      "NDCCode": "55150-186-05",
      "PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (55150-186-05)  / 5 mL in 1 VIAL, SINGLE-USE",
      "NDC11Code": "55150-0186-05",
      "ProductNDC": "55150-186",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Palonosetron Hydrochloride",
      "NonProprietaryName": "Palonosetron Hydrochloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20181106",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204702",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "PALONOSETRON HYDROCHLORIDE",
      "StrengthNumber": ".25",
      "StrengthUnit": "mg/5mL",
      "Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-11-29",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20181106",
      "SamplePackage": "N",
      "IndicationAndUsage": "Palonosetron hydrochloride injection is indicated in adults for prevention of: 1 acute and delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC)., 2 acute nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC)., 3 postoperative nausea and vomiting (PONV) for up to 24 hours following surgery. Efficacy beyond 24 hours has not been demonstrated.",
      "Description": "Palonosetron hydrochloride injection contains palonosetron as palonosetron HCl, an antiemetic and antinauseant agent. It is a serotonin-3 (5-HT3) receptor antagonist with a strong binding affinity for this receptor. Chemically, palonosetron hydrochloride is: (3aS)-2-[(S)-1-Azabicyclo [2.2.2]oct-3-yl]-2,3,3a,4,5,6-hexahydro-1-oxo-1Hbenz[de]isoquinoline hydrochloride. The molecular formula is C19H24N2OHCl, with a molecular weight of 332.87. Palonosetron hydrochloride exists as a single isomer and has the following structural formula. Palonosetron hydrochloride is a white to off-white crystalline powder. It is freely soluble in water, soluble in propylene glycol, and slightly soluble in ethanol and 2-propanol. Palonosetron hydrochloride injection is a sterile, clear, colorless, non-pyrogenic, isotonic, buffered solution free from visible particles for intravenous administration. Palonosetron hydrochloride injection is available as a 5 mL single-dose vial. Each 5 mL vial contains 0.25 mg palonosetron (equivalent to 0.28 mg palonosetron HCl), 207.5 mg mannitol, disodium edetate and citrate buffer in water for intravenous administration. The pH of the solution in the 5 mL vial is 4.5 to 5.5."
    },
    {
      "NDCCode": "55150-203-10",
      "PackageDescription": "10 VIAL in 1 CARTON (55150-203-10)  / 10 mL in 1 VIAL",
      "NDC11Code": "55150-0203-10",
      "ProductNDC": "55150-203",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20160331",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA205780",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/10mL",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Active",
      "LastUpdate": "2024-07-09",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20160331",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin Hydrochloride for Injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly.Vancomycin Hydrochloride for Injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures.Vancomycin Hydrochloride for Injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside.Vancomycin Hydrochloride for Injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection and other antibacterial drugs, Vancomycin Hydrochloride for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
      "Description": "Vancomycin Hydrochloride for Injection, USP is a white or off-white to light tan sterile, lyophilized and preservative free powder or cake, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). Vancomycin hydrochloride USP is a white or almost white, hygroscopic powder. The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula."
    },
    {
      "NDCCode": "55150-204-20",
      "PackageDescription": "10 VIAL in 1 CARTON (55150-204-20)  / 20 mL in 1 VIAL",
      "NDC11Code": "55150-0204-20",
      "ProductNDC": "55150-204",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Vancomycin Hydrochloride",
      "NonProprietaryName": "Vancomycin Hydrochloride",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20160331",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA205780",
      "LabelerName": "Eugia US LLC",
      "SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
      "StrengthNumber": "1",
      "StrengthUnit": "g/20mL",
      "Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
      "Status": "Active",
      "LastUpdate": "2024-07-09",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20160331",
      "SamplePackage": "N",
      "IndicationAndUsage": "Vancomycin Hydrochloride for Injection is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly.Vancomycin Hydrochloride for Injection is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures.Vancomycin Hydrochloride for Injection has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside.Vancomycin Hydrochloride for Injection has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection and other antibacterial drugs, Vancomycin Hydrochloride for Injection should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
      "Description": "Vancomycin Hydrochloride for Injection, USP is a white or off-white to light tan sterile, lyophilized and preservative free powder or cake, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). Vancomycin hydrochloride USP is a white or almost white, hygroscopic powder. The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula."
    }
  ]
}
                    

{"NDC":[{"NDCCode":"55150-235-11","ProprietaryName":"Vecuronium Bromide","NonProprietaryName":"Vecuronium Bromide"},{"NDCCode":"55150-235-10","ProprietaryName":"Vecuronium Bromide","NonProprietaryName":"Vecuronium Bromide"},{"NDCCode":"55150-154-11","ProprietaryName":"Acyclovir Sodium","NonProprietaryName":"Acyclovir Sodium"},{"NDCCode":"55150-183-11","ProprietaryName":"Nicardipine Hydrochloride","NonProprietaryName":"Nicardipine Hydrochloride"},{"NDCCode":"13709-235-11","ProprietaryName":"Wound Wash Antiseptic Saline With Benzalkonium Chloride","NonProprietaryName":"Wound Wash Antiseptic Saline With Benzalkonium Chloride"},{"NDCCode":"13710-235-11","ProprietaryName":"Neil Cleanse Wound Wash Antiseptic Sterile Saline With Benzalkonium Chloride","NonProprietaryName":"Wound Wash Antiseptic Sterile Saline With Benzalkonium Chloride"},{"NDCCode":"50102-235-11","ProprietaryName":"Vylibra","NonProprietaryName":"Norgestimate And Ethinyl Estradiol"},{"NDCCode":"58767-722-11","ProprietaryName":"Cederroth Emergency Eye Wash","NonProprietaryName":"Water"},{"NDCCode":"60687-235-01","ProprietaryName":"Esomeprazole Magnesium","NonProprietaryName":"Esomeprazole Magnesium"},{"NDCCode":"68084-235-01","ProprietaryName":"Amoxicillin And Calvulanate Potassium","NonProprietaryName":"Amoxicillin And Clavulanate Potassium"},{"NDCCode":"68428-235-11","ProprietaryName":"Astacus Fluviatilis","NonProprietaryName":"Astacus Astacus"},{"NDCCode":"68462-235-11","ProprietaryName":"Felodipine","NonProprietaryName":"Felodipine"},{"NDCCode":"69710-235-11","ProprietaryName":"Symbio Tilis Drops","NonProprietaryName":"Bacillus Subtilis"},{"NDCCode":"69711-235-11","ProprietaryName":"Symbio Tilis Drops","NonProprietaryName":"Bacillus Subtilis"},{"NDCCode":"76147-235-11","ProprietaryName":"Strivectin Multi-action Super-c Spf 30","NonProprietaryName":"Avobenzone, Homosalate, Octisalate, Octocrylene"},{"NDCCode":"55150-116-10","ProprietaryName":"Ampicillin And Sulbactam","NonProprietaryName":"Ampicillin Sodium And Sulbactam Sodium"},{"NDCCode":"55150-117-10","ProprietaryName":"Ampicillin And Sulbactam","NonProprietaryName":"Ampicillin Sodium And Sulbactam Sodium"},{"NDCCode":"55150-154-10","ProprietaryName":"Acyclovir Sodium","NonProprietaryName":"Acyclovir Sodium"},{"NDCCode":"55150-155-20","ProprietaryName":"Acyclovir Sodium","NonProprietaryName":"Acyclovir Sodium"},{"NDCCode":"55150-155-21","ProprietaryName":"Acyclovir Sodium","NonProprietaryName":"Acyclovir Sodium"},{"NDCCode":"55150-173-01","ProprietaryName":"Sumatriptan","NonProprietaryName":"Sumatriptan"},{"NDCCode":"55150-174-10","ProprietaryName":"Azithromycin","NonProprietaryName":"Azithromycin"},{"NDCCode":"55150-177-05","ProprietaryName":"Levetiracetam","NonProprietaryName":"Levetiracetam"},{"NDCCode":"55150-180-03","ProprietaryName":"Amiodarone Hydrochloride","NonProprietaryName":"Amiodarone Hydrochloride"},{"NDCCode":"55150-181-09","ProprietaryName":"Amiodarone Hydrochloride","NonProprietaryName":"Amiodarone Hydrochloride"},{"NDCCode":"55150-182-18","ProprietaryName":"Amiodarone Hydrochloride","NonProprietaryName":"Amiodarone Hydrochloride"},{"NDCCode":"55150-185-05","ProprietaryName":"Esomeprazole Sodium","NonProprietaryName":"Esomeprazole Sodium"},{"NDCCode":"55150-186-05","ProprietaryName":"Palonosetron Hydrochloride","NonProprietaryName":"Palonosetron Hydrochloride"},{"NDCCode":"55150-203-10","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"},{"NDCCode":"55150-204-20","ProprietaryName":"Vancomycin Hydrochloride","NonProprietaryName":"Vancomycin Hydrochloride"}]}
                    

<NDCList><NDC><NDCCode>55150-235-11</NDCCode><ProprietaryName>Vecuronium Bromide</ProprietaryName><NonProprietaryName>Vecuronium Bromide</NonProprietaryName></NDC><NDC><NDCCode>55150-235-10</NDCCode><ProprietaryName>Vecuronium Bromide</ProprietaryName><NonProprietaryName>Vecuronium Bromide</NonProprietaryName></NDC><NDC><NDCCode>55150-154-11</NDCCode><ProprietaryName>Acyclovir Sodium</ProprietaryName><NonProprietaryName>Acyclovir Sodium</NonProprietaryName></NDC><NDC><NDCCode>55150-183-11</NDCCode><ProprietaryName>Nicardipine Hydrochloride</ProprietaryName><NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>13709-235-11</NDCCode><ProprietaryName>Wound Wash Antiseptic Saline With Benzalkonium Chloride</ProprietaryName><NonProprietaryName>Wound Wash Antiseptic Saline With Benzalkonium Chloride</NonProprietaryName></NDC><NDC><NDCCode>13710-235-11</NDCCode><ProprietaryName>Neil Cleanse Wound Wash Antiseptic Sterile Saline With Benzalkonium Chloride</ProprietaryName><NonProprietaryName>Wound Wash Antiseptic Sterile Saline With Benzalkonium Chloride</NonProprietaryName></NDC><NDC><NDCCode>50102-235-11</NDCCode><ProprietaryName>Vylibra</ProprietaryName><NonProprietaryName>Norgestimate And Ethinyl Estradiol</NonProprietaryName></NDC><NDC><NDCCode>58767-722-11</NDCCode><ProprietaryName>Cederroth Emergency Eye Wash</ProprietaryName><NonProprietaryName>Water</NonProprietaryName></NDC><NDC><NDCCode>60687-235-01</NDCCode><ProprietaryName>Esomeprazole Magnesium</ProprietaryName><NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName></NDC><NDC><NDCCode>68084-235-01</NDCCode><ProprietaryName>Amoxicillin And Calvulanate Potassium</ProprietaryName><NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName></NDC><NDC><NDCCode>68428-235-11</NDCCode><ProprietaryName>Astacus Fluviatilis</ProprietaryName><NonProprietaryName>Astacus Astacus</NonProprietaryName></NDC><NDC><NDCCode>68462-235-11</NDCCode><ProprietaryName>Felodipine</ProprietaryName><NonProprietaryName>Felodipine</NonProprietaryName></NDC><NDC><NDCCode>69710-235-11</NDCCode><ProprietaryName>Symbio Tilis Drops</ProprietaryName><NonProprietaryName>Bacillus Subtilis</NonProprietaryName></NDC><NDC><NDCCode>69711-235-11</NDCCode><ProprietaryName>Symbio Tilis Drops</ProprietaryName><NonProprietaryName>Bacillus Subtilis</NonProprietaryName></NDC><NDC><NDCCode>76147-235-11</NDCCode><ProprietaryName>Strivectin Multi-action Super-c Spf 30</ProprietaryName><NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene</NonProprietaryName></NDC><NDC><NDCCode>55150-116-10</NDCCode><ProprietaryName>Ampicillin And Sulbactam</ProprietaryName><NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName></NDC><NDC><NDCCode>55150-117-10</NDCCode><ProprietaryName>Ampicillin And Sulbactam</ProprietaryName><NonProprietaryName>Ampicillin Sodium And Sulbactam Sodium</NonProprietaryName></NDC><NDC><NDCCode>55150-154-10</NDCCode><ProprietaryName>Acyclovir Sodium</ProprietaryName><NonProprietaryName>Acyclovir Sodium</NonProprietaryName></NDC><NDC><NDCCode>55150-155-20</NDCCode><ProprietaryName>Acyclovir Sodium</ProprietaryName><NonProprietaryName>Acyclovir Sodium</NonProprietaryName></NDC><NDC><NDCCode>55150-155-21</NDCCode><ProprietaryName>Acyclovir Sodium</ProprietaryName><NonProprietaryName>Acyclovir Sodium</NonProprietaryName></NDC><NDC><NDCCode>55150-173-01</NDCCode><ProprietaryName>Sumatriptan</ProprietaryName><NonProprietaryName>Sumatriptan</NonProprietaryName></NDC><NDC><NDCCode>55150-174-10</NDCCode><ProprietaryName>Azithromycin</ProprietaryName><NonProprietaryName>Azithromycin</NonProprietaryName></NDC><NDC><NDCCode>55150-177-05</NDCCode><ProprietaryName>Levetiracetam</ProprietaryName><NonProprietaryName>Levetiracetam</NonProprietaryName></NDC><NDC><NDCCode>55150-180-03</NDCCode><ProprietaryName>Amiodarone Hydrochloride</ProprietaryName><NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>55150-181-09</NDCCode><ProprietaryName>Amiodarone Hydrochloride</ProprietaryName><NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>55150-182-18</NDCCode><ProprietaryName>Amiodarone Hydrochloride</ProprietaryName><NonProprietaryName>Amiodarone Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>55150-185-05</NDCCode><ProprietaryName>Esomeprazole Sodium</ProprietaryName><NonProprietaryName>Esomeprazole Sodium</NonProprietaryName></NDC><NDC><NDCCode>55150-186-05</NDCCode><ProprietaryName>Palonosetron Hydrochloride</ProprietaryName><NonProprietaryName>Palonosetron Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>55150-203-10</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>55150-204-20</NDCCode><ProprietaryName>Vancomycin Hydrochloride</ProprietaryName><NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName></NDC></NDCList>