RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>55150-386-00</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (55150-386-00)  / 60 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>55150-0386-00</NDC11Code>
    <ProductNDC>55150-386</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Carboplatin</ProprietaryName>
    <NonProprietaryName>Carboplatin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205487</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>CARBOPLATIN</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/60mL</StrengthUnit>
    <Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Initial Treatment of Advanced Ovarian Carcinoma Carboplatin injection is indicated for the initial treatment of advanced ovarian carcinoma in established combination with other approved chemotherapeutic agents. One established combination regimen consists of carboplatin and cyclophosphamide. Two randomized controlled studies conducted by the NCIC and SWOG with carboplatin versus cisplatin, both in combination with cyclophosphamide, have demonstrated equivalent overall survival between the two groups (see CLINICAL STUDIES). There is limited statistical power to demonstrate equivalence in overall pathologic complete response rates and long-term survival (≥ 3 years) because of the small number of patients with these outcomes: the small number of patients with residual tumor &lt; 2 cm after initial surgery also limits the statistical power to demonstrate equivalence in this subgroup. Secondary Treatment of Advanced Ovarian Carcinoma Carboplatin injection is indicated for the palliative treatment of patients with ovarian carcinoma recurrent after prior chemotherapy, including patients who have been previously treated with cisplatin. Within the group of patients previously treated with cisplatin, those who have developed progressive disease while receiving cisplatin therapy may have a decreased response rate.</IndicationAndUsage>
    <Description>Carboplatin injection, USP is supplied as a sterile, pyrogen-free, 10 mg/mL aqueous solution of carboplatin, USP. Each mL contains 10 mg carboplatin, USP, 10 mg mannitol and water for injection, USP.  Carboplatin, USP is a platinum coordination compound. The chemical name for carboplatin, USP is platinum, diammine [1,1-cyclobutanedicarboxylato (2-)-O,O']-, (SP-4-2), and carboplatin, USP has the following structural formula:.  Carboplatin, USP is a white to off white crystalline solid. It is soluble in water at a rate of approximately 14 mg/mL, and the pH of a 1% solution is 5 to 7. It is virtually insoluble in ethanol, acetone, and dimethylacetamide.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-386-01</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (55150-386-01)  / 60 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>55150-0386-01</NDC11Code>
    <ProductNDC>55150-386</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Carboplatin</ProprietaryName>
    <NonProprietaryName>Carboplatin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200803</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205487</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>CARBOPLATIN</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/60mL</StrengthUnit>
    <Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200803</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Initial Treatment of Advanced Ovarian Carcinoma Carboplatin injection is indicated for the initial treatment of advanced ovarian carcinoma in established combination with other approved chemotherapeutic agents. One established combination regimen consists of carboplatin and cyclophosphamide. Two randomized controlled studies conducted by the NCIC and SWOG with carboplatin versus cisplatin, both in combination with cyclophosphamide, have demonstrated equivalent overall survival between the two groups (see CLINICAL STUDIES). There is limited statistical power to demonstrate equivalence in overall pathologic complete response rates and long-term survival (≥ 3 years) because of the small number of patients with these outcomes: the small number of patients with residual tumor &lt; 2 cm after initial surgery also limits the statistical power to demonstrate equivalence in this subgroup. Secondary Treatment of Advanced Ovarian Carcinoma Carboplatin injection is indicated for the palliative treatment of patients with ovarian carcinoma recurrent after prior chemotherapy, including patients who have been previously treated with cisplatin. Within the group of patients previously treated with cisplatin, those who have developed progressive disease while receiving cisplatin therapy may have a decreased response rate.</IndicationAndUsage>
    <Description>Carboplatin injection, USP  is supplied as a sterile, pyrogen-free, 10 mg/mL aqueous solution of carboplatin, USP. Each mL contains 10 mg carboplatin, USP, 10 mg mannitol and water for injection, USP.   Carboplatin, USP is a platinum coordination compound. The chemical name for carboplatin, USP is platinum, diammine [1,1-cyclobutanedicarboxylato (2-)-O,O']-, (SP-4-2), and carboplatin, USP has the following structural formula: Carboplatin, USP is a white to off white crystalline solid. It is soluble in water at a rate of approximately 14 mg/mL, and the pH of a 1% solution is 5 to 7. It is virtually insoluble in ethanol, acetone, and dimethylacetamide.</Description>
  </NDC>
  <NDC>
    <NDCCode>67457-386-81</NDCCode>
    <PackageDescription>4 VIAL in 1 CARTON (67457-386-81)  / 20 mL in 1 VIAL (67457-386-00) </PackageDescription>
    <NDC11Code>67457-0386-81</NDC11Code>
    <ProductNDC>67457-386</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Mycophenolate Mofetil</ProprietaryName>
    <NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210126</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203859</ApplicationNumber>
    <LabelerName>Mylan Institutional LLC</LabelerName>
    <SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/20mL</StrengthUnit>
    <Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210126</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Mycophenolate mofetil (MMF) is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.</IndicationAndUsage>
    <Description>Mycophenolate mofetil is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C23H31NO7, a molecular weight of 433.50, and the following structural formula. MMF is a white or almost white, crystalline powder. It is slightly soluble in water (43 mcg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. MMF hydrochloride has a solubility of 65.8 mg/mL in 5% Dextrose Injection USP (D5W). The pH of the reconstituted solution is 2.7 to 4.1. Mycophenolate mofetil for injection, USP is the hydrochloride salt of MMF. The chemical name for the hydrochloride salt of MMF is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4methyl-4-hexenoate hydrochloride. It has an empirical formula of C23H31NO7 HCl and a molecular weight of 469.96. Mycophenolate mofetil for injection, USP is available as a sterile white to off-white lyophilized powder, plug or cake in single-dose vials containing MMF hydrochloride for administration by intravenous infusion only. Each vial contains 500 mg of mycophenolate mofetil, USP equivalent to 542 mg of mycophenolate mofetil hydrochloride. The inactive ingredients are polysorbate 80, 25 mg, and citric acid, 5 mg. Sodium hydroxide or hydrochloric acid may have been used in the manufacture of mycophenolate mofetil for injection to adjust the pH. Reconstitution and dilution with 5% Dextrose Injection USP yields a slightly yellow solution of MMF, 6 mg/mL [see Dosage and Administration (2.6)].</Description>
  </NDC>
  <NDC>
    <NDCCode>68001-386-00</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (68001-386-00) </PackageDescription>
    <NDC11Code>68001-0386-00</NDC11Code>
    <ProductNDC>68001-386</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nitrofurantion</ProprietaryName>
    <NonProprietaryName>Nitrofurantion</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190514</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA201722</ApplicationNumber>
    <LabelerName>BluePoint Labortories</LabelerName>
    <SubstanceName>NITROFURANTOIN</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Nitrofuran Antibacterial [EPC], Nitrofurans [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2019-05-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190514</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nitrofurantoin Capsules, USP (macrocrystals) is specifically indicated for the treatment of urinary tract infections when due to susceptible strains of Escherichia coli, enterococci. Staphylococcus aureus, and certain susceptible strains of Klebsiella and Enterobacter species. Nitrofurantoin is not indicated for the treatment of pyelonephritis or perinephric abscesses. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Nitrofurantoin Capsules, USP (macrocrystals) and other antibacterial drugs, Nitrofurantoin Capsules, USP (macrocrystals) should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Nitrofurantoins lack the broader tissue distribution of other therapeutic agents approved for urinary tract infections. Consequently, many patients who are treated with Nitrofurantoin Capsules, USP (macrocrystals) are predisposed to persistence or reappearance of bacteriuria. Urine specimens for culture and susceptibility testing should be obtained before and after completion of therapy. If persistence or reappearance of bacteriuria occurs after treatment with Nitrofurantoin Capsules, USP (macrocrystals), other therapeutic agents with broader tissue distribution should be selected. In considering the use of Nitrofurantoin Capsules, USP (macrocrystals), lower eradication rates should be balanced against the increased potential for systemic toxicity and for the development of antimicrobial resistance when agents with broader tissue distribution are utilized.</IndicationAndUsage>
    <Description>Nitrofurantoin macrocrystals, USP is a synthetic chemical of controlled crystal size. It is a stable, yellow, crystalline compound. Nitrofurantoin macrocrystals, USP is an antibacterial agent for specific urinary tract infections. It is available in 25 mg, 50 mg, and 100 mg capsules for oral administration. It is chemically designated as 1-[[(5-nitro-2-furanyl)methylene] amino]-2,4-imidazolidinedione and has the following structural formula. Each Nitrofurantoin Capsules, USP (macrocrystals) contains nitrofurantoin (macrocrystals) USP equivalent to 25 mg, 50 mg or 100 mg and the following inactive ingredients: lactose monohydrate, corn starch, talc, titanium dioxide, gelatin, sodium lauryl sulfate, shellac, propylene glycol, potassium hydroxide and black iron oxide. In addition 50 mg capsules contain FD&amp;C Blue #1, red iron oxide and yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-386-00</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (76420-386-00) </PackageDescription>
    <NDC11Code>76420-0386-00</NDC11Code>
    <ProductNDC>76420-386</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Propranolol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Propranolol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20191031</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA070322</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>PROPRANOLOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Propranolol hydrochloride tablets, USP are indicated in the management of hypertension. They may be used alone or used in combination with other antihypertensive agents, particularly a thiazide diuretic. Propranolol hydrochloride tablets, USP are not indicated in the management of hypertensive emergencies.</IndicationAndUsage>
    <Description>Propranolol hydrochloride, USP is a synthetic beta-adrenergic receptor blocking agent chemically described as 2-Propanol, 1-[(1-methylethyl)amino]-3-(1-naphthalenyloxy)-, hydrochloride,(±)-. Its structural formula is. C ​16​H ​21​NO ​2​HCl M.W. 295.80. Propranolol hydrochloride, USP is a stable, white, crystalline solid which is readily soluble in water and in ethanol. Propranolol hydrochloride tablets, USP are available as tablets for oral administration containing either 10 mg, 20 mg, 40 mg, 60 mg, or 80 mg of propranolol hydrochloride, USP. Propranolol hydrochloride tablets, USP also contain colloidal silicon dioxide, croscarmellose sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose. Color additives include FD&amp;C Yellow no. 6 aluminum lake (10 mg and 80 mg), D&amp;C Yellow no. 10 aluminum lake (40 mg and 80 mg), FD&amp;C Blue no. 1 aluminum lake (20 mg and 40 mg) and FD&amp;C Red no. 40 aluminum lake (60 mg).</Description>
  </NDC>
  <NDC>
    <NDCCode>83163-386-00</NDCCode>
    <PackageDescription>1 BOTTLE, SPRAY in 1 BOX (83163-386-00)  / 59.14 mL in 1 BOTTLE, SPRAY</PackageDescription>
    <NDC11Code>83163-0386-00</NDC11Code>
    <ProductNDC>83163-386</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Waxup Numbing</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20221223</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M015</ApplicationNumber>
    <LabelerName>CONSTRUSOLUTION, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221223</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Helps relieve the local itching and discomfort in the perianal area. For the temporary relief of pain, irritation or burning.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>55150-163-00</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (55150-163-00)  / 30 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>55150-0163-00</NDC11Code>
    <ProductNDC>55150-163</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20130314</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203082</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20130314</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
    <Description>Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses.   Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight 270.8. Lidocaine hydrochloride (C14H22N2O  HCl) has the following structural formula. Lidocaine hydrochloride injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of the solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-202-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (55150-202-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (55150-202-00) </PackageDescription>
    <NDC11Code>55150-0202-10</NDC11Code>
    <ProductNDC>55150-202</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20160330</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205675</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium for injection is indicated for treatment of: 1 gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults., 2 pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults.</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium for injection (pantoprazole sodium), a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is: Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The reconstituted solution of pantoprazole sodium for injection is in the pH range of 9.0 to 10.5. Pantoprazole sodium for injection is supplied for intravenous administration as a sterile, freeze-dried, white to off-white, porous cake or powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP), edetate disodium (1 mg), and sodium hydroxide to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-202-25</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (55150-202-25)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (55150-202-00) </PackageDescription>
    <NDC11Code>55150-0202-25</NDC11Code>
    <ProductNDC>55150-202</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20160330</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205675</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160330</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium for injection is indicated for treatment of: 1 gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults., 2 pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults.</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium for injection (pantoprazole sodium), a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is: Pantoprazole sodium USP is a white to off-white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The reconstituted solution of pantoprazole sodium for injection is in the pH range of 9.0 to 10.5. Pantoprazole sodium for injection is supplied for intravenous administration as a sterile, freeze-dried, white to off-white, porous cake or powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium USP), edetate disodium (1 mg), and sodium hydroxide to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-230-02</NDCCode>
    <PackageDescription>2 SYRINGE, GLASS in 1 CARTON (55150-230-02)  / .5 mL in 1 SYRINGE, GLASS (55150-230-00) </PackageDescription>
    <NDC11Code>55150-0230-02</NDC11Code>
    <ProductNDC>55150-230</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20171226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206918</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fondaparinux sodium injection is a Factor Xa inhibitor (anticoagulant) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in patients undergoing hip fracture surgery (including extended prophylaxis), hip replacement surgery, knee replacement surgery, or abdominal surgery. (1.1), 2 Treatment of DVT or acute pulmonary embolism (PE) when administered in conjunction with warfarin. (1.2, 1.3).</IndicationAndUsage>
    <Description>Fondaparinux sodium injection, USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-­sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. Fondaparinux sodium USP is a white to almost white, hygroscopic powder. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below: Fondaparinux sodium injection, USP is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium injection, USP, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium USP (equivalent to 2.18 mg fondaparinux) in 0.5 mL, 5 mg of fondaparinux sodium USP (equivalent to 4.36 mg fondaparinux) in 0.4 mL, 7.5 mg of fondaparinux sodium USP (equivalent to 6.54 mg fondaparinux) in 0.6 mL, or 10 mg of fondaparinux sodium USP (equivalent to 8.73 mg fondaparinux) in 0.8 mL of an isotonic solution of sodium chloride and water for injection. Also contain hydrochloric acid and sodium hydroxide as pH adjusters. The final drug product is a sterile, clear, colorless to slightly yellow solution, free from visible particles with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-230-10</NDCCode>
    <PackageDescription>10 SYRINGE, GLASS in 1 CARTON (55150-230-10)  / .5 mL in 1 SYRINGE, GLASS (55150-230-00) </PackageDescription>
    <NDC11Code>55150-0230-10</NDC11Code>
    <ProductNDC>55150-230</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20171226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206918</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fondaparinux sodium injection is a Factor Xa inhibitor (anticoagulant) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in patients undergoing hip fracture surgery (including extended prophylaxis), hip replacement surgery, knee replacement surgery, or abdominal surgery. (1.1), 2 Treatment of DVT or acute pulmonary embolism (PE) when administered in conjunction with warfarin. (1.2, 1.3).</IndicationAndUsage>
    <Description>Fondaparinux sodium injection, USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-­sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. Fondaparinux sodium USP is a white to almost white, hygroscopic powder. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below: Fondaparinux sodium injection, USP is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium injection, USP, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium USP (equivalent to 2.18 mg fondaparinux) in 0.5 mL, 5 mg of fondaparinux sodium USP (equivalent to 4.36 mg fondaparinux) in 0.4 mL, 7.5 mg of fondaparinux sodium USP (equivalent to 6.54 mg fondaparinux) in 0.6 mL, or 10 mg of fondaparinux sodium USP (equivalent to 8.73 mg fondaparinux) in 0.8 mL of an isotonic solution of sodium chloride and water for injection. Also contain hydrochloric acid and sodium hydroxide as pH adjusters. The final drug product is a sterile, clear, colorless to slightly yellow solution, free from visible particles with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-231-02</NDCCode>
    <PackageDescription>2 SYRINGE, GLASS in 1 CARTON (55150-231-02)  / .4 mL in 1 SYRINGE, GLASS (55150-231-00) </PackageDescription>
    <NDC11Code>55150-0231-02</NDC11Code>
    <ProductNDC>55150-231</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20171226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206918</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/.4mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fondaparinux sodium injection is a Factor Xa inhibitor (anticoagulant) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in patients undergoing hip fracture surgery (including extended prophylaxis), hip replacement surgery, knee replacement surgery, or abdominal surgery. (1.1), 2 Treatment of DVT or acute pulmonary embolism (PE) when administered in conjunction with warfarin. (1.2, 1.3).</IndicationAndUsage>
    <Description>Fondaparinux sodium injection, USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-­sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. Fondaparinux sodium USP is a white to almost white, hygroscopic powder. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below: Fondaparinux sodium injection, USP is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium injection, USP, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium USP (equivalent to 2.18 mg fondaparinux) in 0.5 mL, 5 mg of fondaparinux sodium USP (equivalent to 4.36 mg fondaparinux) in 0.4 mL, 7.5 mg of fondaparinux sodium USP (equivalent to 6.54 mg fondaparinux) in 0.6 mL, or 10 mg of fondaparinux sodium USP (equivalent to 8.73 mg fondaparinux) in 0.8 mL of an isotonic solution of sodium chloride and water for injection. Also contain hydrochloric acid and sodium hydroxide as pH adjusters. The final drug product is a sterile, clear, colorless to slightly yellow solution, free from visible particles with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-231-10</NDCCode>
    <PackageDescription>10 SYRINGE, GLASS in 1 CARTON (55150-231-10)  / .4 mL in 1 SYRINGE, GLASS (55150-231-00) </PackageDescription>
    <NDC11Code>55150-0231-10</NDC11Code>
    <ProductNDC>55150-231</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20171226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206918</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/.4mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fondaparinux sodium injection is a Factor Xa inhibitor (anticoagulant) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in patients undergoing hip fracture surgery (including extended prophylaxis), hip replacement surgery, knee replacement surgery, or abdominal surgery. (1.1), 2 Treatment of DVT or acute pulmonary embolism (PE) when administered in conjunction with warfarin. (1.2, 1.3).</IndicationAndUsage>
    <Description>Fondaparinux sodium injection, USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-­sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. Fondaparinux sodium USP is a white to almost white, hygroscopic powder. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below: Fondaparinux sodium injection, USP is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium injection, USP, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium USP (equivalent to 2.18 mg fondaparinux) in 0.5 mL, 5 mg of fondaparinux sodium USP (equivalent to 4.36 mg fondaparinux) in 0.4 mL, 7.5 mg of fondaparinux sodium USP (equivalent to 6.54 mg fondaparinux) in 0.6 mL, or 10 mg of fondaparinux sodium USP (equivalent to 8.73 mg fondaparinux) in 0.8 mL of an isotonic solution of sodium chloride and water for injection. Also contain hydrochloric acid and sodium hydroxide as pH adjusters. The final drug product is a sterile, clear, colorless to slightly yellow solution, free from visible particles with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-232-02</NDCCode>
    <PackageDescription>2 SYRINGE, GLASS in 1 CARTON (55150-232-02)  / .6 mL in 1 SYRINGE, GLASS (55150-232-00) </PackageDescription>
    <NDC11Code>55150-0232-02</NDC11Code>
    <ProductNDC>55150-232</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20171226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206918</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/.6mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fondaparinux sodium injection is a Factor Xa inhibitor (anticoagulant) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in patients undergoing hip fracture surgery (including extended prophylaxis), hip replacement surgery, knee replacement surgery, or abdominal surgery. (1.1), 2 Treatment of DVT or acute pulmonary embolism (PE) when administered in conjunction with warfarin. (1.2, 1.3).</IndicationAndUsage>
    <Description>Fondaparinux sodium injection, USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-­sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. Fondaparinux sodium USP is a white to almost white, hygroscopic powder. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below: Fondaparinux sodium injection, USP is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium injection, USP, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium USP (equivalent to 2.18 mg fondaparinux) in 0.5 mL, 5 mg of fondaparinux sodium USP (equivalent to 4.36 mg fondaparinux) in 0.4 mL, 7.5 mg of fondaparinux sodium USP (equivalent to 6.54 mg fondaparinux) in 0.6 mL, or 10 mg of fondaparinux sodium USP (equivalent to 8.73 mg fondaparinux) in 0.8 mL of an isotonic solution of sodium chloride and water for injection. Also contain hydrochloric acid and sodium hydroxide as pH adjusters. The final drug product is a sterile, clear, colorless to slightly yellow solution, free from visible particles with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-232-10</NDCCode>
    <PackageDescription>10 SYRINGE, GLASS in 1 CARTON (55150-232-10)  / .6 mL in 1 SYRINGE, GLASS (55150-232-00) </PackageDescription>
    <NDC11Code>55150-0232-10</NDC11Code>
    <ProductNDC>55150-232</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20171226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206918</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/.6mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fondaparinux sodium injection is a Factor Xa inhibitor (anticoagulant) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in patients undergoing hip fracture surgery (including extended prophylaxis), hip replacement surgery, knee replacement surgery, or abdominal surgery. (1.1), 2 Treatment of DVT or acute pulmonary embolism (PE) when administered in conjunction with warfarin. (1.2, 1.3).</IndicationAndUsage>
    <Description>Fondaparinux sodium injection, USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-­sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. Fondaparinux sodium USP is a white to almost white, hygroscopic powder. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below: Fondaparinux sodium injection, USP is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium injection, USP, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium USP (equivalent to 2.18 mg fondaparinux) in 0.5 mL, 5 mg of fondaparinux sodium USP (equivalent to 4.36 mg fondaparinux) in 0.4 mL, 7.5 mg of fondaparinux sodium USP (equivalent to 6.54 mg fondaparinux) in 0.6 mL, or 10 mg of fondaparinux sodium USP (equivalent to 8.73 mg fondaparinux) in 0.8 mL of an isotonic solution of sodium chloride and water for injection. Also contain hydrochloric acid and sodium hydroxide as pH adjusters. The final drug product is a sterile, clear, colorless to slightly yellow solution, free from visible particles with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-233-02</NDCCode>
    <PackageDescription>2 SYRINGE, GLASS in 1 CARTON (55150-233-02)  / .8 mL in 1 SYRINGE, GLASS (55150-233-00) </PackageDescription>
    <NDC11Code>55150-0233-02</NDC11Code>
    <ProductNDC>55150-233</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20171226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206918</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/.8mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fondaparinux sodium injection is a Factor Xa inhibitor (anticoagulant) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in patients undergoing hip fracture surgery (including extended prophylaxis), hip replacement surgery, knee replacement surgery, or abdominal surgery. (1.1), 2 Treatment of DVT or acute pulmonary embolism (PE) when administered in conjunction with warfarin. (1.2, 1.3).</IndicationAndUsage>
    <Description>Fondaparinux sodium injection, USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-­sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. Fondaparinux sodium USP is a white to almost white, hygroscopic powder. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below: Fondaparinux sodium injection, USP is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium injection, USP, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium USP (equivalent to 2.18 mg fondaparinux) in 0.5 mL, 5 mg of fondaparinux sodium USP (equivalent to 4.36 mg fondaparinux) in 0.4 mL, 7.5 mg of fondaparinux sodium USP (equivalent to 6.54 mg fondaparinux) in 0.6 mL, or 10 mg of fondaparinux sodium USP (equivalent to 8.73 mg fondaparinux) in 0.8 mL of an isotonic solution of sodium chloride and water for injection. Also contain hydrochloric acid and sodium hydroxide as pH adjusters. The final drug product is a sterile, clear, colorless to slightly yellow solution, free from visible particles with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-233-10</NDCCode>
    <PackageDescription>10 SYRINGE, GLASS in 1 CARTON (55150-233-10)  / .8 mL in 1 SYRINGE, GLASS (55150-233-00) </PackageDescription>
    <NDC11Code>55150-0233-10</NDC11Code>
    <ProductNDC>55150-233</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fondaparinux Sodium</ProprietaryName>
    <NonProprietaryName>Fondaparinux Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20171226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206918</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>FONDAPARINUX SODIUM</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/.8mL</StrengthUnit>
    <Pharm_Classes>Factor Xa Inhibitor [EPC], Factor Xa Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fondaparinux sodium injection is a Factor Xa inhibitor (anticoagulant) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in patients undergoing hip fracture surgery (including extended prophylaxis), hip replacement surgery, knee replacement surgery, or abdominal surgery. (1.1), 2 Treatment of DVT or acute pulmonary embolism (PE) when administered in conjunction with warfarin. (1.2, 1.3).</IndicationAndUsage>
    <Description>Fondaparinux sodium injection, USP is a sterile solution containing fondaparinux sodium. It is a synthetic and specific inhibitor of activated Factor X (Xa). Fondaparinux sodium is methyl O-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-β-D-glucopyra-nuronosyl-(1→4)-O-2-deoxy-3,6-di-O-sulfo-2-(sulfoamino)-α-D-glucopyranosyl-(1→4)-O-2-O-­sulfo-α-L-idopyranuronosyl-(1→4)-2-deoxy-6-O-sulfo-2-(sulfoamino)-α-D-glucopyranoside, decasodium salt. Fondaparinux sodium USP is a white to almost white, hygroscopic powder. The molecular formula of fondaparinux sodium is C31H43N3Na10O49S8 and its molecular weight is 1728. The structural formula is provided below: Fondaparinux sodium injection, USP is supplied as a sterile, preservative-free injectable solution for subcutaneous use. Each single-dose, prefilled syringe of fondaparinux sodium injection, USP, affixed with an automatic needle protection system, contains 2.5 mg of fondaparinux sodium USP (equivalent to 2.18 mg fondaparinux) in 0.5 mL, 5 mg of fondaparinux sodium USP (equivalent to 4.36 mg fondaparinux) in 0.4 mL, 7.5 mg of fondaparinux sodium USP (equivalent to 6.54 mg fondaparinux) in 0.6 mL, or 10 mg of fondaparinux sodium USP (equivalent to 8.73 mg fondaparinux) in 0.8 mL of an isotonic solution of sodium chloride and water for injection. Also contain hydrochloric acid and sodium hydroxide as pH adjusters. The final drug product is a sterile, clear, colorless to slightly yellow solution, free from visible particles with a pH between 5.0 and 8.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-311-00</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (55150-311-00)  &gt; 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>55150-0311-00</NDC11Code>
    <ProductNDC>55150-311</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydroxyprogesterone Caproate</ProprietaryName>
    <NonProprietaryName>Hydroxyprogesterone Caproate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20190509</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211142</ApplicationNumber>
    <LabelerName>AuroMedics Pharma LLC</LabelerName>
    <SubstanceName>HYDROXYPROGESTERONE CAPROATE</SubstanceName>
    <StrengthNumber>1250</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Progesterone Congeners [CS],Progestin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-10-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190509</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>55150-335-00</NDCCode>
    <PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (55150-335-00)  / 45 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>55150-0335-00</NDC11Code>
    <ProductNDC>55150-335</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Carboplatin</ProprietaryName>
    <NonProprietaryName>Carboplatin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20160929</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205487</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>CARBOPLATIN</SubstanceName>
    <StrengthNumber>450</StrengthNumber>
    <StrengthUnit>mg/45mL</StrengthUnit>
    <Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-02-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160929</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Initial Treatment of Advanced Ovarian Carcinoma Carboplatin injection is indicated for the initial treatment of advanced ovarian carcinoma in established combination with other approved chemotherapeutic agents. One established combination regimen consists of carboplatin and cyclophosphamide. Two randomized controlled studies conducted by the NCIC and SWOG with carboplatin versus cisplatin, both in combination with cyclophosphamide, have demonstrated equivalent overall survival between the two groups (see CLINICAL STUDIES). There is limited statistical power to demonstrate equivalence in overall pathologic complete response rates and long-term survival (≥ 3 years) because of the small number of patients with these outcomes: the small number of patients with residual tumor &lt; 2 cm after initial surgery also limits the statistical power to demonstrate equivalence in this subgroup. Secondary Treatment of Advanced Ovarian Carcinoma Carboplatin injection is indicated for the palliative treatment of patients with ovarian carcinoma recurrent after prior chemotherapy, including patients who have been previously treated with cisplatin. Within the group of patients previously treated with cisplatin, those who have developed progressive disease while receiving cisplatin therapy may have a decreased response rate.</IndicationAndUsage>
    <Description>Carboplatin injection, USP is supplied as a sterile, pyrogen-free, 10 mg/mL aqueous solution of carboplatin, USP. Each mL contains 10 mg carboplatin, USP, 10 mg mannitol and water for injection, USP.  Carboplatin, USP is a platinum coordination compound. The chemical name for carboplatin, USP is platinum, diammine [1,1-cyclobutanedicarboxylato (2-)-O,O']-, (SP-4-2), and carboplatin, USP has the following structural formula:.  Carboplatin, USP is a white to off white crystalline solid. It is soluble in water at a rate of approximately 14 mg/mL, and the pH of a 1% solution is 5 to 7. It is virtually insoluble in ethanol, acetone, and dimethylacetamide.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-0166-0</NDCCode>
    <PackageDescription>10 TABLET in 1 BOTTLE (50090-0166-0) </PackageDescription>
    <NDC11Code>50090-0166-00</NDC11Code>
    <ProductNDC>50090-0166</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Medroxyprogesterone Acetate</ProprietaryName>
    <NonProprietaryName>Medroxyprogesterone Acetate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19961204</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040159</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>MEDROXYPROGESTERONE ACETATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160621</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Medroxyprogesterone acetate tablets, USP are indicated for the treatment of secondary amenorrhea and abnormal uterine bleeding due to hormonal imbalance in the absence of organic pathology, such as fibroids or uterine cancer. They are also indicated for use in the prevention of endometrial hyperplasia in nonhysterectomized postmenopausal women who are receiving daily oral conjugated estrogens 0.625 mg tablets.</IndicationAndUsage>
    <Description>Medroxyprogesterone acetate tablets, USP contain medroxyprogesterone acetate, USP which is a derivative of progesterone. It is a white to off-white, odorless crystalline powder, stable in air, melting between 200 and 210°C. It is freely soluble in chloroform, soluble in acetone and in dioxane, sparingly soluble in alcohol and in methanol, slightly soluble in ether, and insoluble in water. The chemical name for medroxyprogesterone acetate is pregn-4-ene-3, 20-dione, 17-(acetyloxy)-6-methyl-, (6α)-. The structural formula is.                                      C24H34O4        M.W. 386.53. Each medroxyprogesterone acetate tablet for oral administration contains 2.5 mg, 5 mg or 10 mg of medroxyprogesterone acetate, USP and the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, methylcellulose, pregelatinized corn starch, and sodium lauryl sulfate.</Description>
  </NDC>
  <NDC>
    <NDCCode>50090-0573-0</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (50090-0573-0)  &gt; 28 TABLET, SUGAR COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>50090-0573-00</NDC11Code>
    <ProductNDC>50090-0573</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prempro</ProprietaryName>
    <NonProprietaryName>Conjugated Estrogens And Medroxyprogesterone Acetate</NonProprietaryName>
    <DosageFormName>TABLET, SUGAR COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090921</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020527</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>ESTROGENS, CONJUGATED; MEDROXYPROGESTERONE ACETATE</SubstanceName>
    <StrengthNumber>.625; 2.5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Estrogen Receptor Agonists [MoA], Estrogen [EPC], Estrogens, Conjugated (USP) [CS], Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>PREMPRO/PREMPHASE is an estrogen plus progestin indicated in a woman with a uterus for: 1 Treatment of Moderate to Severe Vasomotor Symptoms due to Menopause (1.1), 2 Treatment of Moderate to Severe Vulvar and Vaginal Atrophy due to Menopause (1.2), 3 Prevention of Postmenopausal Osteoporosis (1.3).</IndicationAndUsage>
    <Description>Premarin (conjugated estrogens tablets, USP) for oral administration contains a mixture obtained exclusively from natural sources, occurring as the sodium salts of water-soluble estrogen sulfates blended to represent the average composition of material derived from pregnant mares' urine. It is a mixture of sodium estrone sulfate and sodium equilin sulfate. It contains as concomitant components, as sodium sulfate conjugates, 17 α-dihydroequilin, 17 α-estradiol and 17 β-dihydroequilin. Medroxyprogesterone acetate is a derivative of progesterone. It is a white to off-white, odorless, crystalline powder, stable in air, melting between 200°C and 210°C. It is freely soluble in chloroform, soluble in acetone and in dioxane, sparingly soluble in alcohol and in methanol, slightly soluble in ether, and insoluble in water. The chemical name for MPA is pregn-4-ene-3, 20-dione, 17-(acetyloxy)-6-methyl-, (6α)-. Its molecular formula is C24H34O4, with a molecular weight of 386.53. Its structural formula is. PREMPRO 0.3 mg/1.5 mg and 0.45 mg/1.5 mg tablets contain the following inactive ingredients: calcium phosphate tribasic, microcrystalline cellulose, carnauba wax, hypromellose, hydroxypropyl cellulose, sucrose, Eudragit NE 30D, lactose monohydrate, magnesium stearate, polyethylene glycol, titanium dioxide, yellow iron oxide, propylene glycol and black iron oxide. PREMPRO 0.625 mg/2.5 mg tablets contain the following inactive ingredients: calcium phosphate tribasic, microcrystalline cellulose, carnauba wax, hypromellose, hydroxypropyl cellulose, sucrose, Eudragit NE 30D, lactose monohydrate, magnesium stearate, polyethylene glycol, propylene glycol, titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide. PREMPRO 0.625 mg/5 mg tablets contain the following inactive ingredients: calcium phosphate tribasic, carnauba wax, Eudragit NE 30D, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sucrose, titanium dioxide, triethyl citrate, FD&amp;C Blue No. 2, black iron oxide, and propylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-3799-0</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (54868-3799-0)  &gt; 28 TABLET, SUGAR COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>54868-3799-00</NDC11Code>
    <ProductNDC>54868-3799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prempro</ProprietaryName>
    <NonProprietaryName>Conjugated Estrogens And Medroxyprogesterone Acetate</NonProprietaryName>
    <DosageFormName>TABLET, SUGAR COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19960620</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020527</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <SubstanceName>ESTROGENS, CONJUGATED; MEDROXYPROGESTERONE ACETATE</SubstanceName>
    <StrengthNumber>.625; 2.5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Estrogen [EPC],Estrogen Receptor Agonists [MoA],Estrogens, Conjugated (USP) [Chemical/Ingredient],Progesterone Congeners [Chemical/Ingredient],Progestin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>PREMPRO/PREMPHASE is an estrogen/progestin indicated in women with intact uteri for: 1 Treatment of Moderate to Severe Vasomotor Symptoms due to Menopause (1.1), 2 Treatment of Moderate to Severe Vulvar and Vaginal Atrophy due to Menopause (1.2), 3 Prevention of Postmenopausal Osteoporosis (1.3).</IndicationAndUsage>
    <Description>Premarin (conjugated estrogens tablets, USP) for oral administration contains a mixture obtained exclusively from natural sources, occurring as the sodium salts of water-soluble estrogen sulfates blended to represent the average composition of material derived from pregnant mares' urine. It is a mixture of sodium estrone sulfate and sodium equilin sulfate. It contains as concomitant components, as sodium sulfate conjugates, 17 α-dihydroequilin, 17 α‑estradiol and 17 β-dihydroequilin. Medroxyprogesterone acetate is a derivative of progesterone. It is a white to off-white, odorless, crystalline powder, stable in air, melting between 200°C and 210°C. It is freely soluble in chloroform, soluble in acetone and in dioxane, sparingly soluble in alcohol and in methanol, slightly soluble in ether, and insoluble in water. The chemical name for MPA is pregn-4-ene-3, 20-dione, 17-(acetyloxy)-6-methyl-, (6α)-. Its molecular formula is C24H34O4, with a molecular weight of 386.53. Its structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-3800-0</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (54868-3800-0)  &gt; 1 KIT in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>54868-3800-00</NDC11Code>
    <ProductNDC>54868-3800</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Premphase</ProprietaryName>
    <NonProprietaryName>Conjugated Estrogens And Medroxyprogesterone Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20050708</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075796</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>PREMPRO/PREMPHASE is an estrogen/progestin indicated in women with intact uteri for: 1 Treatment of Moderate to Severe Vasomotor Symptoms due to Menopause (1.1), 2 Treatment of Moderate to Severe Vulvar and Vaginal Atrophy due to Menopause (1.2), 3 Prevention of Postmenopausal Osteoporosis (1.3).</IndicationAndUsage>
    <Description>Premarin (conjugated estrogens tablets, USP) for oral administration contains a mixture obtained exclusively from natural sources, occurring as the sodium salts of water-soluble estrogen sulfates blended to represent the average composition of material derived from pregnant mares' urine. It is a mixture of sodium estrone sulfate and sodium equilin sulfate. It contains as concomitant components, as sodium sulfate conjugates, 17 α-dihydroequilin, 17 α‑estradiol and 17 β-dihydroequilin. Medroxyprogesterone acetate is a derivative of progesterone. It is a white to off-white, odorless, crystalline powder, stable in air, melting between 200°C and 210°C. It is freely soluble in chloroform, soluble in acetone and in dioxane, sparingly soluble in alcohol and in methanol, slightly soluble in ether, and insoluble in water. The chemical name for MPA is pregn-4-ene-3, 20-dione, 17-(acetyloxy)-6-methyl-, (6α)-. Its molecular formula is C24H34O4, with a molecular weight of 386.53. Its structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-4866-0</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (54868-4866-0)  &gt; 28 TABLET, SUGAR COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>54868-4866-00</NDC11Code>
    <ProductNDC>54868-4866</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prempro</ProprietaryName>
    <NonProprietaryName>Conjugated Estrogens And Medroxyprogesterone Acetate</NonProprietaryName>
    <DosageFormName>TABLET, SUGAR COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20030725</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020527</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <SubstanceName>ESTROGENS, CONJUGATED; MEDROXYPROGESTERONE ACETATE</SubstanceName>
    <StrengthNumber>.45; 1.5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Estrogen [EPC],Estrogen Receptor Agonists [MoA],Estrogens, Conjugated (USP) [Chemical/Ingredient],Progesterone Congeners [Chemical/Ingredient],Progestin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>PREMPRO/PREMPHASE is an estrogen/progestin indicated in women with intact uteri for: 1 Treatment of Moderate to Severe Vasomotor Symptoms due to Menopause (1.1), 2 Treatment of Moderate to Severe Vulvar and Vaginal Atrophy due to Menopause (1.2), 3 Prevention of Postmenopausal Osteoporosis (1.3).</IndicationAndUsage>
    <Description>Premarin (conjugated estrogens tablets, USP) for oral administration contains a mixture obtained exclusively from natural sources, occurring as the sodium salts of water-soluble estrogen sulfates blended to represent the average composition of material derived from pregnant mares' urine. It is a mixture of sodium estrone sulfate and sodium equilin sulfate. It contains as concomitant components, as sodium sulfate conjugates, 17 α-dihydroequilin, 17 α‑estradiol and 17 β-dihydroequilin. Medroxyprogesterone acetate is a derivative of progesterone. It is a white to off-white, odorless, crystalline powder, stable in air, melting between 200°C and 210°C. It is freely soluble in chloroform, soluble in acetone and in dioxane, sparingly soluble in alcohol and in methanol, slightly soluble in ether, and insoluble in water. The chemical name for MPA is pregn-4-ene-3, 20-dione, 17-(acetyloxy)-6-methyl-, (6α)-. Its molecular formula is C24H34O4, with a molecular weight of 386.53. Its structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>54868-5047-0</NDCCode>
    <PackageDescription>1 BLISTER PACK in 1 CARTON (54868-5047-0)  &gt; 28 TABLET, SUGAR COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>54868-5047-00</NDC11Code>
    <ProductNDC>54868-5047</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prempro</ProprietaryName>
    <NonProprietaryName>Conjugated Estrogens And Medroxyprogesterone Acetate</NonProprietaryName>
    <DosageFormName>TABLET, SUGAR COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20040408</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020527</ApplicationNumber>
    <LabelerName>Physicians Total Care, Inc.</LabelerName>
    <SubstanceName>ESTROGENS, CONJUGATED; MEDROXYPROGESTERONE ACETATE</SubstanceName>
    <StrengthNumber>.3; 1.5</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Estrogen [EPC],Estrogen Receptor Agonists [MoA],Estrogens, Conjugated (USP) [Chemical/Ingredient],Progesterone Congeners [Chemical/Ingredient],Progestin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-07-24</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>PREMPRO/PREMPHASE is an estrogen/progestin indicated in women with intact uteri for: 1 Treatment of Moderate to Severe Vasomotor Symptoms due to Menopause (1.1), 2 Treatment of Moderate to Severe Vulvar and Vaginal Atrophy due to Menopause (1.2), 3 Prevention of Postmenopausal Osteoporosis (1.3).</IndicationAndUsage>
    <Description>Premarin (conjugated estrogens tablets, USP) for oral administration contains a mixture obtained exclusively from natural sources, occurring as the sodium salts of water-soluble estrogen sulfates blended to represent the average composition of material derived from pregnant mares' urine. It is a mixture of sodium estrone sulfate and sodium equilin sulfate. It contains as concomitant components, as sodium sulfate conjugates, 17 α-dihydroequilin, 17 α‑estradiol and 17 β-dihydroequilin. Medroxyprogesterone acetate is a derivative of progesterone. It is a white to off-white, odorless, crystalline powder, stable in air, melting between 200°C and 210°C. It is freely soluble in chloroform, soluble in acetone and in dioxane, sparingly soluble in alcohol and in methanol, slightly soluble in ether, and insoluble in water. The chemical name for MPA is pregn-4-ene-3, 20-dione, 17-(acetyloxy)-6-methyl-, (6α)-. Its molecular formula is C24H34O4, with a molecular weight of 386.53. Its structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>70518-4666-0</NDCCode>
    <PackageDescription>50 POUCH in 1 BOX (70518-4666-0)  / 1 TABLET in 1 POUCH (70518-4666-1) </PackageDescription>
    <NDC11Code>70518-4666-00</NDC11Code>
    <ProductNDC>70518-4666</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Medroxyprogesterone Acetate</ProprietaryName>
    <NonProprietaryName>Medroxyprogesterone Acetate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260527</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040159</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>MEDROXYPROGESTERONE ACETATE</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Progesterone Congeners [CS], Progestin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Medroxyprogesterone acetate tablets, USP are indicated for the treatment of secondary amenorrhea and abnormal uterine bleeding due to hormonal imbalance in the absence of organic pathology, such as fibroids or uterine cancer. They are also indicated for use in the prevention of endometrial hyperplasia in nonhysterectomized postmenopausal women who are receiving daily oral conjugated estrogens 0.625 mg tablets.</IndicationAndUsage>
    <Description>Medroxyprogesterone acetate tablets, USP contain medroxyprogesterone acetate, USP which is a derivative of progesterone. It is a white to off-white, odorless crystalline powder, stable in air, melting between 200 and 210°C. It is freely soluble in chloroform, soluble in acetone and in dioxane, sparingly soluble in alcohol and in methanol, slightly soluble in ether, and insoluble in water. The chemical name for medroxyprogesterone acetate is pregn-4-ene-3, 20-dione, 17-(acetyloxy)-6-methyl-, (6α)-. The structural formula is.                                      C 24H 34O 4        M.W. 386.53. Each medroxyprogesterone acetate tablet for oral administration contains 2.5 mg, 5 mg or 10 mg of medroxyprogesterone acetate, USP and the following inactive ingredients: crospovidone, lactose monohydrate, magnesium stearate, methylcellulose, pregelatinized corn starch, and sodium lauryl sulfate.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-183-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (55150-183-10)  / 10 mL in 1 VIAL, SINGLE-DOSE (55150-183-01) </PackageDescription>
    <NDC11Code>55150-0183-10</NDC11Code>
    <ProductNDC>55150-183</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nicardipine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210408</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211121</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>NICARDIPINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210408</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nicardipine hydrochloride injection is a calcium channel blocker indicated for the short-term treatment of hypertension when oral therapy is not feasible. (1.1).</IndicationAndUsage>
    <Description>Nicardipine hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride injection, USP for intravenous administration contains 2.5 mg/mL of nicardipine hydrochloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-­dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure: Nicardipine hydrochloride is a pale greenish yellow crystalline powder that melts at about 169°C. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. Nicardipine hydrochloride injection, USP is available as a sterile, non-pyrogenic, clear, yellow colored solution in 10 mL vials for intravenous infusion after dilution. Each mL contains 2.5 mg nicardipine hydrochloride in Water for Injection, USP with 48.00 mg Sorbitol, NF, buffered to pH 3.5 with 0.525 mg citric acid monohydrate, USP and 0.09 mg sodium hydroxide, NF. Additional citric acid and/or sodium hydroxide may have been added to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-183-11</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (55150-183-11)  / 10 mL in 1 VIAL, SINGLE-DOSE (55150-183-02) </PackageDescription>
    <NDC11Code>55150-0183-11</NDC11Code>
    <ProductNDC>55150-183</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nicardipine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Nicardipine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210408</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211121</ApplicationNumber>
    <LabelerName>Eugia US LLC</LabelerName>
    <SubstanceName>NICARDIPINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210408</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nicardipine hydrochloride injection is a calcium channel blocker indicated for the short-term treatment of hypertension when oral therapy is not feasible. (1.1).</IndicationAndUsage>
    <Description>Nicardipine hydrochloride is a calcium ion influx inhibitor (slow channel blocker or calcium channel blocker). Nicardipine hydrochloride injection, USP for intravenous administration contains 2.5 mg/mL of nicardipine hydrochloride. Nicardipine hydrochloride is a dihydropyridine derivative with IUPAC (International Union of Pure and Applied Chemistry) chemical name (±)-2-(benzyl-methyl amino) ethyl methyl 1,4-dihydro-2,6-­dimethyl-4-(m-nitrophenyl)-3,5-pyridinedicarboxylate monohydrochloride and has the following structure: Nicardipine hydrochloride is a pale greenish yellow crystalline powder that melts at about 169°C. It is freely soluble in chloroform, methanol, and glacial acetic acid, sparingly soluble in anhydrous ethanol, slightly soluble in n-butanol, water, 0.01 M potassium dihydrogen phosphate, acetone, and dioxane, very slightly soluble in ethyl acetate, and practically insoluble in benzene, ether, and hexane. It has a molecular weight of 515.99. Nicardipine hydrochloride injection, USP is available as a sterile, non-pyrogenic, clear, yellow colored solution in 10 mL vials for intravenous infusion after dilution. Each mL contains 2.5 mg nicardipine hydrochloride in Water for Injection, USP with 48.00 mg Sorbitol, NF, buffered to pH 3.5 with 0.525 mg citric acid monohydrate, USP and 0.09 mg sodium hydroxide, NF. Additional citric acid and/or sodium hydroxide may have been added to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-216-05</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (55150-216-05)  &gt; 5 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>55150-0216-05</NDC11Code>
    <ProductNDC>55150-216</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atracurium Besylate</ProprietaryName>
    <NonProprietaryName>Atracurium Besylate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20150408</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206010</ApplicationNumber>
    <LabelerName>AuroMedics Pharma LLC</LabelerName>
    <SubstanceName>ATRACURIUM BESYLATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-06-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150408</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atracurium Besylate Injection, USP is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
    <Description>Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. Atracurium besylate USP is white to almost white solid and hygroscopic. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1. Atracurium Besylate Injection, USP is a sterile, non-pyrogenic, clear, colorless aqueous solution free from visible particles. Each mL contains 10 mg atracurium besylate USP (equivalent to 7.47 mg atracurium). The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C/77°F), use atracurium besylate injection within 14 days even if re-refrigerated.</Description>
  </NDC>
  <NDC>
    <NDCCode>55150-217-10</NDCCode>
    <PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (55150-217-10)  &gt; 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>55150-0217-10</NDC11Code>
    <ProductNDC>55150-217</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atracurium Besylate</ProprietaryName>
    <NonProprietaryName>Atracurium Besylate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20150408</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206011</ApplicationNumber>
    <LabelerName>AuroMedics Pharma LLC</LabelerName>
    <SubstanceName>ATRACURIUM BESYLATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-02-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150408</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atracurium Besylate Injection, USP is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
    <Description>Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. Atracurium besylate USP is white to almost white solid and hygroscopic. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1.Atracurium Besylate Injection, USP is a sterile, non-pyrogenic, clear, colorless aqueous solution free from visible particles. Each mL contains 10 mg atracurium besylate USP (equivalent to 7.47 mg atracurium). The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. The multiple-dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C/77°F), use atracurium besylate injection within 14 days even if re-refrigerated.</Description>
  </NDC>
</NDCList>