{
"NDC": [
{
"NDCCode": "55154-2098-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-2098-0) > 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "55154-2098-00",
"ProductNDC": "55154-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20100813",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090615",
"LabelerName": "Cardinal Health",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-03-14",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "50090-2098-0",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 PACKAGE (50090-2098-0) / 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "50090-2098-00",
"ProductNDC": "50090-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Depo-medrol",
"NonProprietaryName": "Methylprednisolone Acetate",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; SOFT TISSUE",
"StartMarketingDate": "19590528",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011757",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "METHYLPREDNISOLONE ACETATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151013",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intramuscular use of DEPO-MEDROL Sterile Aqueous Suspension is indicated as follows. Allergic States: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic Diseases: Bullous dermatitis herpetiformis, exfoliative dermatitis, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine Disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsupportive thyroiditis. Gastrointestinal Diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic Disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond Blackfan anemia), pure red cell aplasia, select cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic Diseases: For palliative management of: leukemias and lymphomas. Nervous System: Cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic Diseases: Sympathetic opthalmia, temporal arteritis, uveitis, ocular inflammatory conditions unresponsive to topical corticosteroids. Renal Diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome, or that due to lupus erythematosus. Respiratory Diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic Disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.",
"Description": "DEPO-MEDROL is an anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue or intralesional injection. It is available as single-dose vials in two strengths: 40 mg/mL, 80 mg/mL. Each mL of these preparations contains. Sodium Chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.0 to 7.0.). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20-dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11β)- and the molecular weight is 416.51. The structural formula is represented below. DEPO-MEDROL Sterile Aqueous Suspension contains methylprednisolone acetate which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate is a white or practically white, odorless, crystalline powder which melts at about 215° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water."
},
{
"NDCCode": "70518-2098-0",
"PackageDescription": "30 TABLET, FILM COATED in 1 BLISTER PACK (70518-2098-0) ",
"NDC11Code": "70518-2098-00",
"ProductNDC": "70518-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203244",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-09-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190522",
"SamplePackage": "N",
"IndicationAndUsage": "Gabapentin tablets are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.",
"Description": "The active ingredient in gabapentin tablets is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin is a white to off-white crystalline solid with a pK a1of 3.7 and a pK a2of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin and copovidone, hydroxyl propyl cellulose, magnesium stearate, mannitol, poloxamer, talc, low-substituted hydroxypropyl cellulose and opadry II (white). Opadry II (white) contains polyvinyl alcohol, polyethylene glycol, titanium dioxide, and talc."
},
{
"NDCCode": "0187-2098-10",
"PackageDescription": "10 TUBE in 1 CARTON (0187-2098-10) / 3 g in 1 TUBE (0187-2098-03) ",
"NDC11Code": "00187-2098-10",
"ProductNDC": "0187-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arazlo",
"NonProprietaryName": "Tazarotene",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191219",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211882",
"LabelerName": "Bausch Health US, LLC",
"SubstanceName": "TAZAROTENE",
"StrengthNumber": ".45",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2023-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191219",
"SamplePackage": "Y",
"IndicationAndUsage": "ARAZLO ®(tazarotene) lotion, 0.045% is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.",
"Description": "ARAZLO (tazarotene) is a white to off-white lotion containing 0.045% tazarotene by weight for topical administration. Tazarotene is a member of the acetylenic class of retinoids. The chemical name for tazarotene is 6-[(3,4-Dihydro-4,4-dimethyl-2H-1-benzothiopyran-6-yl)ethynyl]-3-pyridinecarboxylic acid ethyl ester. The structural formula for tazarotene is represented below. Tazarotene. Molecular Formula: C 21H 21NO 2S Molecular Weight: 351.46. Each gram of ARAZLO contains 0.45 mg (0.045%) tazarotene in a white to off-white lotion base consisting of carbomer copolymer type B, carbomer homopolymer type A, diethyl sebacate, edetate disodium dihydrate, light mineral oil, methylparaben, propylparaben, purified water, sodium hydroxide, sorbitan monooleate and sorbitol solution, 70%."
},
{
"NDCCode": "0187-2098-45",
"PackageDescription": "1 TUBE in 1 CARTON (0187-2098-45) / 45 g in 1 TUBE",
"NDC11Code": "00187-2098-45",
"ProductNDC": "0187-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Arazlo",
"NonProprietaryName": "Tazarotene",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20191219",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA211882",
"LabelerName": "Bausch Health US, LLC",
"SubstanceName": "TAZAROTENE",
"StrengthNumber": ".45",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2023-09-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191219",
"SamplePackage": "N",
"IndicationAndUsage": "ARAZLO ®(tazarotene) lotion, 0.045% is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.",
"Description": "ARAZLO (tazarotene) is a white to off-white lotion containing 0.045% tazarotene by weight for topical administration. Tazarotene is a member of the acetylenic class of retinoids. The chemical name for tazarotene is 6-[(3,4-Dihydro-4,4-dimethyl-2H-1-benzothiopyran-6-yl)ethynyl]-3-pyridinecarboxylic acid ethyl ester. The structural formula for tazarotene is represented below. Tazarotene. Molecular Formula: C 21H 21NO 2S Molecular Weight: 351.46. Each gram of ARAZLO contains 0.45 mg (0.045%) tazarotene in a white to off-white lotion base consisting of carbomer copolymer type B, carbomer homopolymer type A, diethyl sebacate, edetate disodium dihydrate, light mineral oil, methylparaben, propylparaben, purified water, sodium hydroxide, sorbitan monooleate and sorbitol solution, 70%."
},
{
"NDCCode": "36987-2098-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-2098-1)",
"NDC11Code": "36987-2098-01",
"ProductNDC": "36987-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saccharomyces Cerevisiae",
"NonProprietaryName": "Saccharomyces Cerevisiae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "SACCHAROMYCES CEREVISIAE",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Fungal Proteins [CS],Non-Standardized Fungal Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Dietary Proteins [CS],Allergens [CS],Fungal Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-2098-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-2098-2)",
"NDC11Code": "36987-2098-02",
"ProductNDC": "36987-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saccharomyces Cerevisiae",
"NonProprietaryName": "Saccharomyces Cerevisiae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "SACCHAROMYCES CEREVISIAE",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Fungal Proteins [CS],Non-Standardized Fungal Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Dietary Proteins [CS],Allergens [CS],Fungal Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-2098-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-2098-3)",
"NDC11Code": "36987-2098-03",
"ProductNDC": "36987-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saccharomyces Cerevisiae",
"NonProprietaryName": "Saccharomyces Cerevisiae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "SACCHAROMYCES CEREVISIAE",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Fungal Proteins [CS],Non-Standardized Fungal Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Dietary Proteins [CS],Allergens [CS],Fungal Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "36987-2098-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-2098-4)",
"NDC11Code": "36987-2098-04",
"ProductNDC": "36987-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Saccharomyces Cerevisiae",
"NonProprietaryName": "Saccharomyces Cerevisiae",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "SACCHAROMYCES CEREVISIAE",
"StrengthNumber": ".1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Fungal Proteins [CS],Non-Standardized Fungal Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Dietary Proteins [CS],Allergens [CS],Fungal Proteins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "65044-2098-2",
"PackageDescription": "10 mL in 1 VIAL (65044-2098-2) ",
"NDC11Code": "65044-2098-02",
"ProductNDC": "65044-2098",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Pollens - Trees, Pecan Carya Carya Illinoensis",
"NonProprietaryName": "Pecan Carya Carya Illinoensis",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19410419",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103888",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "CARYA ILLINOINENSIS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19410419",
"SamplePackage": "N",
"IndicationAndUsage": "NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.",
"Description": "Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas."
},
{
"NDCCode": "65044-2098-3",
"PackageDescription": "30 mL in 1 VIAL (65044-2098-3) ",
"NDC11Code": "65044-2098-03",
"ProductNDC": "65044-2098",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Pollens - Trees, Pecan Carya Carya Illinoensis",
"NonProprietaryName": "Pecan Carya Carya Illinoensis",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19410419",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103888",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "CARYA ILLINOINENSIS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19410419",
"SamplePackage": "N",
"IndicationAndUsage": "NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.",
"Description": "Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas."
},
{
"NDCCode": "65044-2098-4",
"PackageDescription": "50 mL in 1 VIAL (65044-2098-4) ",
"NDC11Code": "65044-2098-04",
"ProductNDC": "65044-2098",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Pollens - Trees, Pecan Carya Carya Illinoensis",
"NonProprietaryName": "Pecan Carya Carya Illinoensis",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19410419",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103888",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "CARYA ILLINOINENSIS POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19410419",
"SamplePackage": "N",
"IndicationAndUsage": "NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.",
"Description": "Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas."
},
{
"NDCCode": "70518-2098-2",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-2098-2) ",
"NDC11Code": "70518-2098-02",
"ProductNDC": "70518-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gabapentin",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203244",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-10-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20230924",
"SamplePackage": "N",
"IndicationAndUsage": "Gabapentin tablets are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.",
"Description": "The active ingredient in gabapentin tablets is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin is a white to off-white crystalline solid with a pK a1of 3.7 and a pK a2of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin and copovidone, hydroxyl propyl cellulose, magnesium stearate, mannitol, poloxamer, talc, low-substituted hydroxypropyl cellulose and opadry II (white). Opadry II (white) contains polyvinyl alcohol, polyethylene glycol, titanium dioxide, and talc."
},
{
"NDCCode": "71335-2098-1",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (71335-2098-1) ",
"NDC11Code": "71335-2098-01",
"ProductNDC": "71335-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078154",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220520",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam tablets USP are indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam tablets USP are indicated for adjunctive therapy for treatment of: 1 Partial onset seizures in patients one month of age and older with epilepsy (1.1), 2 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).",
"Description": "Levetiracetam USP is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1000 mg (white) tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent). Levetiracetam tablets USP contain the labeled amount of levetiracetam. For 250 mg, 500 mg and 750 mg strengths. Inactive ingredients: colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake. 500 mg tablets: Yellow Iron Oxide. 750 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake, FD&C Yellow No. 6/sunset yellow FCF Aluminum Lake, iron oxide red. For 1000 mg strength. Inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide."
},
{
"NDCCode": "71335-2098-2",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (71335-2098-2) ",
"NDC11Code": "71335-2098-02",
"ProductNDC": "71335-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levetiracetam",
"NonProprietaryName": "Levetiracetam",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078154",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "LEVETIRACETAM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2026-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240403",
"SamplePackage": "N",
"IndicationAndUsage": "Levetiracetam tablets USP are indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam tablets USP are indicated for adjunctive therapy for treatment of: 1 Partial onset seizures in patients one month of age and older with epilepsy (1.1), 2 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).",
"Description": "Levetiracetam USP is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1000 mg (white) tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent). Levetiracetam tablets USP contain the labeled amount of levetiracetam. For 250 mg, 500 mg and 750 mg strengths. Inactive ingredients: colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake. 500 mg tablets: Yellow Iron Oxide. 750 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake, FD&C Yellow No. 6/sunset yellow FCF Aluminum Lake, iron oxide red. For 1000 mg strength. Inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide."
},
{
"NDCCode": "72934-2098-2",
"PackageDescription": "30 g in 1 BOTTLE, PUMP (72934-2098-2) ",
"NDC11Code": "72934-2098-02",
"ProductNDC": "72934-2098",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hyaluronic Acid Sodium Salt 2% / Mometasone Furoate 0.1% / Niacinamide 4%",
"NonProprietaryName": "Hyaluronic Acid Sodium Salt 2% / Mometasone Furoate 0.1% / Niacinamide 4%",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190521",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Sincerus Florida, LLC",
"SubstanceName": "HYALURONIC ACID; MOMETASONE FUROATE; NIACINAMIDE",
"StrengthNumber": "2; .1; 4",
"StrengthUnit": "g/100g; g/100g; g/100g",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190521",
"SamplePackage": "N"
},
{
"NDCCode": "55154-0109-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0109-0) > 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0109-00",
"ProductNDC": "55154-0109",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Biaxin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19911031",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050662",
"LabelerName": "Cardinal Health",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-03-14",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55154-0113-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0113-0) > 1 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "55154-0113-00",
"ProductNDC": "55154-0113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Depakote",
"NonProprietaryName": "Divalproex Sodium",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100607",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019680",
"LabelerName": "Cardinal Health",
"SubstanceName": "DIVALPROEX SODIUM",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
},
{
"NDCCode": "55154-0158-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0158-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0158-00",
"ProductNDC": "55154-0158",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin",
"NonProprietaryName": "Rosuvastatin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207616",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250714",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are indicated: To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor. As an adjunct to diet to: Reduce low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia. Reduce LDL-C and slow the progression of atherosclerosis in adults. Reduce LDL-C in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia. Hypertriglyceridemia.",
"Description": "Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is (3R, 5S, 6E) -7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6-heptenoic acid calcium salt with the following structural formula:. The molecular formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white or almost white hygroscopic powder that is sparingly soluble in methanol, slightly soluble in water, practically insoluble in anhydrous ethanol. Rosuvastatin tablets USP for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: Each tablet contains: crospovidone, FD&C blue #2/indigo carmine aluminum lake, FD&C red #40/allura red AC aluminum lake, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, talc, titanium dioxide and triacetin. Additionally 5 mg tablets contain FD&C yellow #5/tartrazine aluminum lake and 10 mg, 20 mg and 40 mg tablets contain FD&C yellow #6/sunset yellow FCF aluminum lake. USP Dissolution test is pending."
},
{
"NDCCode": "55154-0159-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0159-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0159-00",
"ProductNDC": "55154-0159",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin",
"NonProprietaryName": "Rosuvastatin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20251016",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207616",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251016",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are indicated: To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor. As an adjunct to diet to: Reduce low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia. Reduce LDL-C and slow the progression of atherosclerosis in adults. Reduce LDL-C in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia. Hypertriglyceridemia.",
"Description": "Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is (3R, 5S, 6E) -7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6-heptenoic acid calcium salt with the following structural formula:. The molecular formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white or almost white hygroscopic powder that is sparingly soluble in methanol, slightly soluble in water, practically insoluble in anhydrous ethanol. Rosuvastatin tablets USP for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: Each tablet contains: crospovidone, FD&C blue #2/indigo carmine aluminum lake, FD&C red #40/allura red AC aluminum lake, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, talc, titanium dioxide and triacetin. Additionally 5 mg tablets contain FD&C yellow #5/tartrazine aluminum lake and 10 mg, 20 mg and 40 mg tablets contain FD&C yellow #6/sunset yellow FCF aluminum lake. USP Dissolution test is pending."
},
{
"NDCCode": "55154-0160-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0160-0) / 1 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "55154-0160-00",
"ProductNDC": "55154-0160",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Celecoxib",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260710",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204519",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260710",
"SamplePackage": "N",
"IndicationAndUsage": "Celecoxib is indicated.",
"Description": "Celecoxib is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)-3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C 17H 14F 3N 3O 2S, and it has the following chemical structure. Celecoxib is a white or almost white crystalline powder with a pKa of about 11 (sulfonamide moiety). Celecoxib is hydrophobic (log P is 3.5) and soluble to freely soluble in ethanol, soluble in methylene chloride, practically insoluble in water. The inactive ingredients in celecoxib capsule include: croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone, sodium lauryl sulfate, titanium dioxide and gelatin. Details of non-volatile components of the imprinting ink are given below. 50 mg capsule contains shellac, propylene glycol and red iron oxide. 100 mg capsule contains shellac, propylene glycol and FD & C Blue No. # 2 aluminum lake. 200 mg capsule contains shellac, propylene glycol and yellow iron oxide. 400 mg capsule contains shellac, propylene glycol, titanium dioxide, yellow iron oxide and FD & C Blue No. # 2 aluminum lake."
},
{
"NDCCode": "55154-0161-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0161-0) / 1 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "55154-0161-00",
"ProductNDC": "55154-0161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mycophenolate Mofetil",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200197",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260914",
"SamplePackage": "N",
"IndicationAndUsage": "Mycophenolate mofetil (MMF) is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.",
"Description": "Mycophenolate mofetil is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C 23H 31NO 7, a molecular weight of 433.50, and the following structural formula:. Mycophenolate mofetil is a white to off-white crystalline powder. It is slightly soluble in water (43 mcg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. Mycophenolate mofetil is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of mycophenolate mofetil. Inactive ingredients in Mycophenolate mofetil capsules USP 250 mg include croscarmellose sodium, pregelatinized starch, povidone (K-90), isopropyl alcohol and magnesium stearate. The capsule shells contain gelatin, sodium lauryl sulphate, FD&C blue 2, red iron oxide, yellow iron oxide and titanium dioxide. The capsule is printed with edible black ink comprised of black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac, strong ammonia solution. Inactive ingredients in mycophenolate mofetil tablets USP 500 mg include croscarmellose sodium, povidone (K-90), isopropyl alcohol, microcrystalline cellulose, magnesium stearate, hypromellose, polyethylene glycol, titanium dioxide, red iron oxide, black iron oxide, and yellow iron oxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "55154-0180-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0180-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0180-00",
"ProductNDC": "55154-0180",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078040",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250519",
"SamplePackage": "N",
"IndicationAndUsage": "Risperidone is an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).",
"Description": "Risperidone Tablets contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.49. The structural formula is. Risperidone, USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Each risperidone tablet intended for oral administration contains 0.25 mg or 0.5 mg or 1 mg or 2 mg or 3 mg or 4 mg of risperidone. Additionally each tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol, sodium lauryl sulfate, and titanium dioxide. Additionally each 0.25 mg tablet contains iron oxide red and iron oxide yellow, 0.5 mg tablet contains iron oxide red, 2 mg tablet contains FD&C yellow # 6/sunset yellow FCF aluminum lake, 3 mg tablet contains D&C yellow # 10 aluminum lake and 4 mg tablet contains D&C yellow # 10 aluminum lake and FD&C blue # 2/ indigo carmine aluminum lake."
},
{
"NDCCode": "55154-0181-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0181-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0181-00",
"ProductNDC": "55154-0181",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Labetalol Hydrochloride",
"NonProprietaryName": "Labetalol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250506",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209603",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "LABETALOL HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250506",
"SamplePackage": "N",
"IndicationAndUsage": "Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.",
"Description": "Labetalol Hydrochloride Tablets, USP are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl), USP is a racemate, chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl] benzamide monohydrochloride and it has the following structural formula. Labetalol HCl, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl, USP is a white to off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, 300 mg or 400 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "55154-0182-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0182-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0182-00",
"ProductNDC": "55154-0182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Labetalol Hydrochloride",
"NonProprietaryName": "Labetalol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250506",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209603",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "LABETALOL HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250506",
"SamplePackage": "N",
"IndicationAndUsage": "Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.",
"Description": "Labetalol Hydrochloride Tablets, USP are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl), USP is a racemate, chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl] benzamide monohydrochloride and it has the following structural formula. Labetalol HCl, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl, USP is a white to off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, 300 mg or 400 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "55154-0183-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0183-0) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "55154-0183-00",
"ProductNDC": "55154-0183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "Sr",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250609",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202304",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250609",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release (SR) tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release (SR) tablets in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].",
"Description": "Bupropion hydrochloride extended-release (SR) tablets, USP an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO∙HCl. Bupropion hydrochloride, USP powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release (SR) tablets, USP are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake, the 150-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Red #40/Allura Red Ac Aluminum Lake, and the 200-mg tablet contains ferrosoferric oxide and iron oxide red. Meet USP Dissolution Test 7."
},
{
"NDCCode": "55154-0184-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0184-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0184-00",
"ProductNDC": "55154-0184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Labetalol Hydrochloride",
"NonProprietaryName": "Labetalol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250506",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209603",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "LABETALOL HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250506",
"SamplePackage": "N",
"IndicationAndUsage": "Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.",
"Description": "Labetalol Hydrochloride Tablets, USP are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl), USP is a racemate, chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl] benzamide monohydrochloride and it has the following structural formula. Labetalol HCl, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl, USP is a white to off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, 300 mg or 400 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "55154-0186-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0186-0) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "55154-0186-00",
"ProductNDC": "55154-0186",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250709",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040858",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250709",
"SamplePackage": "N",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain magnesium stearate, microcrystalline cellulose, orange lake blend, silicon dioxide, and sodium starch glycolate. The orange lake blend consists of FD&C yellow #6."
},
{
"NDCCode": "55154-0187-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0187-0) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "55154-0187-00",
"ProductNDC": "55154-0187",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250709",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040858",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250709",
"SamplePackage": "N",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain magnesium stearate, microcrystalline cellulose, orange lake blend, silicon dioxide, and sodium starch glycolate. The orange lake blend consists of FD&C yellow #6."
},
{
"NDCCode": "55154-0188-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0188-0) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "55154-0188-00",
"ProductNDC": "55154-0188",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Loratadine",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250828",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076301",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-09-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250828",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose , 2 itchy, watery eyes, 3 sneezing , 4 itching of the nose or throat."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>55154-2098-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-2098-0) > 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-2098-00</NDC11Code>
<ProductNDC>55154-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100813</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090615</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-14</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50090-2098-0</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 PACKAGE (50090-2098-0) / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>50090-2098-00</NDC11Code>
<ProductNDC>50090-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Depo-medrol</ProprietaryName>
<NonProprietaryName>Methylprednisolone Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRA-ARTICULAR; INTRALESIONAL; INTRAMUSCULAR; SOFT TISSUE</RouteName>
<StartMarketingDate>19590528</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011757</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>METHYLPREDNISOLONE ACETATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151013</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intramuscular use of DEPO-MEDROL Sterile Aqueous Suspension is indicated as follows. Allergic States: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic Diseases: Bullous dermatitis herpetiformis, exfoliative dermatitis, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine Disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsupportive thyroiditis. Gastrointestinal Diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic Disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond Blackfan anemia), pure red cell aplasia, select cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic Diseases: For palliative management of: leukemias and lymphomas. Nervous System: Cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic Diseases: Sympathetic opthalmia, temporal arteritis, uveitis, ocular inflammatory conditions unresponsive to topical corticosteroids. Renal Diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome, or that due to lupus erythematosus. Respiratory Diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic Disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>DEPO-MEDROL is an anti-inflammatory glucocorticoid for intramuscular, intra-articular, soft tissue or intralesional injection. It is available as single-dose vials in two strengths: 40 mg/mL, 80 mg/mL. Each mL of these preparations contains. Sodium Chloride was added to adjust tonicity. When necessary, pH was adjusted with sodium hydroxide and/or hydrochloric acid. The pH of the finished product remains within the USP specified range (e.g., 3.0 to 7.0.). The chemical name for methylprednisolone acetate is pregna-1,4-diene-3,20-dione, 21-(acetyloxy)-11,17-dihydroxy-6-methyl-,(6α,11β)- and the molecular weight is 416.51. The structural formula is represented below. DEPO-MEDROL Sterile Aqueous Suspension contains methylprednisolone acetate which is the 6-methyl derivative of prednisolone. Methylprednisolone acetate is a white or practically white, odorless, crystalline powder which melts at about 215° with some decomposition. It is soluble in dioxane, sparingly soluble in acetone, alcohol, chloroform, and methanol, and slightly soluble in ether. It is practically insoluble in water.</Description>
</NDC>
<NDC>
<NDCCode>70518-2098-0</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (70518-2098-0) </PackageDescription>
<NDC11Code>70518-2098-00</NDC11Code>
<ProductNDC>70518-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203244</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gabapentin tablets are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
<Description>The active ingredient in gabapentin tablets is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin is a white to off-white crystalline solid with a pK a1of 3.7 and a pK a2of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin and copovidone, hydroxyl propyl cellulose, magnesium stearate, mannitol, poloxamer, talc, low-substituted hydroxypropyl cellulose and opadry II (white). Opadry II (white) contains polyvinyl alcohol, polyethylene glycol, titanium dioxide, and talc.</Description>
</NDC>
<NDC>
<NDCCode>0187-2098-10</NDCCode>
<PackageDescription>10 TUBE in 1 CARTON (0187-2098-10) / 3 g in 1 TUBE (0187-2098-03) </PackageDescription>
<NDC11Code>00187-2098-10</NDC11Code>
<ProductNDC>0187-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arazlo</ProprietaryName>
<NonProprietaryName>Tazarotene</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191219</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211882</ApplicationNumber>
<LabelerName>Bausch Health US, LLC</LabelerName>
<SubstanceName>TAZAROTENE</SubstanceName>
<StrengthNumber>.45</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191219</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ARAZLO ®(tazarotene) lotion, 0.045% is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.</IndicationAndUsage>
<Description>ARAZLO (tazarotene) is a white to off-white lotion containing 0.045% tazarotene by weight for topical administration. Tazarotene is a member of the acetylenic class of retinoids. The chemical name for tazarotene is 6-[(3,4-Dihydro-4,4-dimethyl-2H-1-benzothiopyran-6-yl)ethynyl]-3-pyridinecarboxylic acid ethyl ester. The structural formula for tazarotene is represented below. Tazarotene. Molecular Formula: C 21H 21NO 2S Molecular Weight: 351.46. Each gram of ARAZLO contains 0.45 mg (0.045%) tazarotene in a white to off-white lotion base consisting of carbomer copolymer type B, carbomer homopolymer type A, diethyl sebacate, edetate disodium dihydrate, light mineral oil, methylparaben, propylparaben, purified water, sodium hydroxide, sorbitan monooleate and sorbitol solution, 70%.</Description>
</NDC>
<NDC>
<NDCCode>0187-2098-45</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0187-2098-45) / 45 g in 1 TUBE</PackageDescription>
<NDC11Code>00187-2098-45</NDC11Code>
<ProductNDC>0187-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Arazlo</ProprietaryName>
<NonProprietaryName>Tazarotene</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20191219</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA211882</ApplicationNumber>
<LabelerName>Bausch Health US, LLC</LabelerName>
<SubstanceName>TAZAROTENE</SubstanceName>
<StrengthNumber>.45</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-09-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ARAZLO ®(tazarotene) lotion, 0.045% is indicated for the topical treatment of acne vulgaris in patients 9 years of age and older.</IndicationAndUsage>
<Description>ARAZLO (tazarotene) is a white to off-white lotion containing 0.045% tazarotene by weight for topical administration. Tazarotene is a member of the acetylenic class of retinoids. The chemical name for tazarotene is 6-[(3,4-Dihydro-4,4-dimethyl-2H-1-benzothiopyran-6-yl)ethynyl]-3-pyridinecarboxylic acid ethyl ester. The structural formula for tazarotene is represented below. Tazarotene. Molecular Formula: C 21H 21NO 2S Molecular Weight: 351.46. Each gram of ARAZLO contains 0.45 mg (0.045%) tazarotene in a white to off-white lotion base consisting of carbomer copolymer type B, carbomer homopolymer type A, diethyl sebacate, edetate disodium dihydrate, light mineral oil, methylparaben, propylparaben, purified water, sodium hydroxide, sorbitan monooleate and sorbitol solution, 70%.</Description>
</NDC>
<NDC>
<NDCCode>36987-2098-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-2098-1)</PackageDescription>
<NDC11Code>36987-2098-01</NDC11Code>
<ProductNDC>36987-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saccharomyces Cerevisiae</ProprietaryName>
<NonProprietaryName>Saccharomyces Cerevisiae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>SACCHAROMYCES CEREVISIAE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Fungal Proteins [CS],Non-Standardized Fungal Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Dietary Proteins [CS],Allergens [CS],Fungal Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-2098-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-2098-2)</PackageDescription>
<NDC11Code>36987-2098-02</NDC11Code>
<ProductNDC>36987-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saccharomyces Cerevisiae</ProprietaryName>
<NonProprietaryName>Saccharomyces Cerevisiae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>SACCHAROMYCES CEREVISIAE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Fungal Proteins [CS],Non-Standardized Fungal Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Dietary Proteins [CS],Allergens [CS],Fungal Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-2098-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-2098-3)</PackageDescription>
<NDC11Code>36987-2098-03</NDC11Code>
<ProductNDC>36987-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saccharomyces Cerevisiae</ProprietaryName>
<NonProprietaryName>Saccharomyces Cerevisiae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>SACCHAROMYCES CEREVISIAE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Fungal Proteins [CS],Non-Standardized Fungal Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Dietary Proteins [CS],Allergens [CS],Fungal Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>36987-2098-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-2098-4)</PackageDescription>
<NDC11Code>36987-2098-04</NDC11Code>
<ProductNDC>36987-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Saccharomyces Cerevisiae</ProprietaryName>
<NonProprietaryName>Saccharomyces Cerevisiae</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>SACCHAROMYCES CEREVISIAE</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Allergens [CS],Fungal Proteins [CS],Non-Standardized Fungal Allergenic Extract [EPC],Non-Standardized Food Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Dietary Proteins [CS],Allergens [CS],Fungal Proteins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>65044-2098-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL (65044-2098-2) </PackageDescription>
<NDC11Code>65044-2098-02</NDC11Code>
<ProductNDC>65044-2098</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Pollens - Trees, Pecan Carya Carya Illinoensis</ProprietaryName>
<NonProprietaryName>Pecan Carya Carya Illinoensis</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19410419</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103888</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>CARYA ILLINOINENSIS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19410419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.</IndicationAndUsage>
<Description>Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas.</Description>
</NDC>
<NDC>
<NDCCode>65044-2098-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL (65044-2098-3) </PackageDescription>
<NDC11Code>65044-2098-03</NDC11Code>
<ProductNDC>65044-2098</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Pollens - Trees, Pecan Carya Carya Illinoensis</ProprietaryName>
<NonProprietaryName>Pecan Carya Carya Illinoensis</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19410419</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103888</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>CARYA ILLINOINENSIS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19410419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.</IndicationAndUsage>
<Description>Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas.</Description>
</NDC>
<NDC>
<NDCCode>65044-2098-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL (65044-2098-4) </PackageDescription>
<NDC11Code>65044-2098-04</NDC11Code>
<ProductNDC>65044-2098</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Pollens - Trees, Pecan Carya Carya Illinoensis</ProprietaryName>
<NonProprietaryName>Pecan Carya Carya Illinoensis</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19410419</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103888</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>CARYA ILLINOINENSIS POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19410419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NON-STANDARDIZED ALLERGENIC EXTRACTS are indicated for: 1 Skin test diagnosis of individuals with a clinical history of allergy to the specific corresponding allergens.</IndicationAndUsage>
<Description>Non-standardized allergenic extracts are labeled “No U.S. Standard of Potency”. Non-standardized allergenic extracts are supplied in a Glycero Cocas extraction solution, which consists of 0.5% sodium chloride for isotonicity, 0.275% sodium bicarbonate as a buffer, and 50% glycerin (volume/volume) as preservative. Non-standardized allergenic extracts are supplied as a weight to volume (w/v) solution of allergen in extraction solution. Product concentrations vary based on the source. Refer to the vial label for the product concentration. Source material mold mycelia and Candida albicans cells are cultivated on liquid medium which may contain one or more of the following constituents: casein hydrolysate; malt extract; yeast extract; maltose; dextrose; ammonium nitrate, calcium carbonate, calcium chloride, ammonium citrate, potassium phosphate, sodium citrate, citric acid; magnesium sulfate; or trace elements. Acetone and ether may be used as drying and de-fatting agents. Candida albicans cells are treated with phenol, which is removed by dialysis. Dog Hair and Dander extracts are manufactured in 3 product forms: 1 Dog Hair and Dander (Regular Process) is derived from extraction of the source material without additional processing, and is prepared at 1:10 w/v in Glycero-Cocas., 2 Acetone Precipitated (AP) Dog Hair and Dander is derived from the acetone precipitated aqueous extract and is prepared at 1:100 w/v in Glycero-Cocas., 3 Ultrafiltered (UF) Dog Hair and Dander is derived from the UF aqueous extract and is prepared at 1:650 w/v in Glycero‑Cocas.</Description>
</NDC>
<NDC>
<NDCCode>70518-2098-2</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70518-2098-2) </PackageDescription>
<NDC11Code>70518-2098-02</NDC11Code>
<ProductNDC>70518-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gabapentin</ProprietaryName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203244</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230924</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gabapentin tablets are indicated for: 1 Management of postherpetic neuralgia in adults, 2 Adjunctive therapy in the treatment of partial onset seizures, with and without secondary generalization, in adults and pediatric patients 3 years and older with epilepsy.</IndicationAndUsage>
<Description>The active ingredient in gabapentin tablets is gabapentin, which has the chemical name 1-(aminomethyl)cyclohexaneacetic acid. The molecular formula of gabapentin is C 9H 17NO 2and the molecular weight is 171.24. The structural formula of gabapentin is:. Gabapentin is a white to off-white crystalline solid with a pK a1of 3.7 and a pK a2of 10.7. It is freely soluble in water and both basic and acidic aqueous solutions. The log of the partition coefficient (n-octanol/0.05M phosphate buffer) at pH 7.4 is –1.25. Each gabapentin tablet contains 600 mg or 800 mg of gabapentin and copovidone, hydroxyl propyl cellulose, magnesium stearate, mannitol, poloxamer, talc, low-substituted hydroxypropyl cellulose and opadry II (white). Opadry II (white) contains polyvinyl alcohol, polyethylene glycol, titanium dioxide, and talc.</Description>
</NDC>
<NDC>
<NDCCode>71335-2098-1</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (71335-2098-1) </PackageDescription>
<NDC11Code>71335-2098-01</NDC11Code>
<ProductNDC>71335-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078154</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam tablets USP are indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam tablets USP are indicated for adjunctive therapy for treatment of: 1 Partial onset seizures in patients one month of age and older with epilepsy (1.1), 2 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).</IndicationAndUsage>
<Description>Levetiracetam USP is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1000 mg (white) tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent). Levetiracetam tablets USP contain the labeled amount of levetiracetam. For 250 mg, 500 mg and 750 mg strengths. Inactive ingredients: colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake. 500 mg tablets: Yellow Iron Oxide. 750 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake, FD&C Yellow No. 6/sunset yellow FCF Aluminum Lake, iron oxide red. For 1000 mg strength. Inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>71335-2098-2</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (71335-2098-2) </PackageDescription>
<NDC11Code>71335-2098-02</NDC11Code>
<ProductNDC>71335-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levetiracetam</ProprietaryName>
<NonProprietaryName>Levetiracetam</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078154</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>LEVETIRACETAM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240403</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levetiracetam tablets USP are indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam tablets USP are indicated for adjunctive therapy for treatment of: 1 Partial onset seizures in patients one month of age and older with epilepsy (1.1), 2 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 3 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy (1.3).</IndicationAndUsage>
<Description>Levetiracetam USP is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), 750 mg (orange), and 1000 mg (white) tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C8H14N2O2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula. Levetiracetam USP is a white to off-white crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104.0 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent). Levetiracetam tablets USP contain the labeled amount of levetiracetam. For 250 mg, 500 mg and 750 mg strengths. Inactive ingredients: colloidal silicon dioxide, corn starch, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc, titanium dioxide, and additional agents listed below. 250 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake. 500 mg tablets: Yellow Iron Oxide. 750 mg tablets: FD&C Blue No. 2/indigo carmine Aluminum Lake, FD&C Yellow No. 6/sunset yellow FCF Aluminum Lake, iron oxide red. For 1000 mg strength. Inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>72934-2098-2</NDCCode>
<PackageDescription>30 g in 1 BOTTLE, PUMP (72934-2098-2) </PackageDescription>
<NDC11Code>72934-2098-02</NDC11Code>
<ProductNDC>72934-2098</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hyaluronic Acid Sodium Salt 2% / Mometasone Furoate 0.1% / Niacinamide 4%</ProprietaryName>
<NonProprietaryName>Hyaluronic Acid Sodium Salt 2% / Mometasone Furoate 0.1% / Niacinamide 4%</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190521</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Sincerus Florida, LLC</LabelerName>
<SubstanceName>HYALURONIC ACID; MOMETASONE FUROATE; NIACINAMIDE</SubstanceName>
<StrengthNumber>2; .1; 4</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190521</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55154-0109-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0109-0) > 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0109-00</NDC11Code>
<ProductNDC>55154-0109</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Biaxin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19911031</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050662</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-14</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55154-0113-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0113-0) > 1 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0113-00</NDC11Code>
<ProductNDC>55154-0113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Depakote</ProprietaryName>
<NonProprietaryName>Divalproex Sodium</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100607</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019680</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>DIVALPROEX SODIUM</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>55154-0158-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0158-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0158-00</NDC11Code>
<ProductNDC>55154-0158</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin</ProprietaryName>
<NonProprietaryName>Rosuvastatin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207616</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250714</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are indicated: To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor. As an adjunct to diet to: Reduce low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia. Reduce LDL-C and slow the progression of atherosclerosis in adults. Reduce LDL-C in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia. Hypertriglyceridemia.</IndicationAndUsage>
<Description>Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is (3R, 5S, 6E) -7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6-heptenoic acid calcium salt with the following structural formula:. The molecular formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white or almost white hygroscopic powder that is sparingly soluble in methanol, slightly soluble in water, practically insoluble in anhydrous ethanol. Rosuvastatin tablets USP for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: Each tablet contains: crospovidone, FD&C blue #2/indigo carmine aluminum lake, FD&C red #40/allura red AC aluminum lake, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, talc, titanium dioxide and triacetin. Additionally 5 mg tablets contain FD&C yellow #5/tartrazine aluminum lake and 10 mg, 20 mg and 40 mg tablets contain FD&C yellow #6/sunset yellow FCF aluminum lake. USP Dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>55154-0159-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0159-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0159-00</NDC11Code>
<ProductNDC>55154-0159</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin</ProprietaryName>
<NonProprietaryName>Rosuvastatin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251016</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207616</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251016</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are indicated: To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor. As an adjunct to diet to: Reduce low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia. Reduce LDL-C and slow the progression of atherosclerosis in adults. Reduce LDL-C in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia. Hypertriglyceridemia.</IndicationAndUsage>
<Description>Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is (3R, 5S, 6E) -7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6-heptenoic acid calcium salt with the following structural formula:. The molecular formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white or almost white hygroscopic powder that is sparingly soluble in methanol, slightly soluble in water, practically insoluble in anhydrous ethanol. Rosuvastatin tablets USP for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: Each tablet contains: crospovidone, FD&C blue #2/indigo carmine aluminum lake, FD&C red #40/allura red AC aluminum lake, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, talc, titanium dioxide and triacetin. Additionally 5 mg tablets contain FD&C yellow #5/tartrazine aluminum lake and 10 mg, 20 mg and 40 mg tablets contain FD&C yellow #6/sunset yellow FCF aluminum lake. USP Dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>55154-0160-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0160-0) / 1 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0160-00</NDC11Code>
<ProductNDC>55154-0160</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Celecoxib</ProprietaryName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260710</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204519</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Celecoxib is indicated.</IndicationAndUsage>
<Description>Celecoxib is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)-3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C 17H 14F 3N 3O 2S, and it has the following chemical structure. Celecoxib is a white or almost white crystalline powder with a pKa of about 11 (sulfonamide moiety). Celecoxib is hydrophobic (log P is 3.5) and soluble to freely soluble in ethanol, soluble in methylene chloride, practically insoluble in water. The inactive ingredients in celecoxib capsule include: croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone, sodium lauryl sulfate, titanium dioxide and gelatin. Details of non-volatile components of the imprinting ink are given below. 50 mg capsule contains shellac, propylene glycol and red iron oxide. 100 mg capsule contains shellac, propylene glycol and FD & C Blue No. # 2 aluminum lake. 200 mg capsule contains shellac, propylene glycol and yellow iron oxide. 400 mg capsule contains shellac, propylene glycol, titanium dioxide, yellow iron oxide and FD & C Blue No. # 2 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>55154-0161-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0161-0) / 1 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0161-00</NDC11Code>
<ProductNDC>55154-0161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mycophenolate Mofetil</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200197</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mycophenolate mofetil (MMF) is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.</IndicationAndUsage>
<Description>Mycophenolate mofetil is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C 23H 31NO 7, a molecular weight of 433.50, and the following structural formula:. Mycophenolate mofetil is a white to off-white crystalline powder. It is slightly soluble in water (43 mcg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. Mycophenolate mofetil is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of mycophenolate mofetil. Inactive ingredients in Mycophenolate mofetil capsules USP 250 mg include croscarmellose sodium, pregelatinized starch, povidone (K-90), isopropyl alcohol and magnesium stearate. The capsule shells contain gelatin, sodium lauryl sulphate, FD&C blue 2, red iron oxide, yellow iron oxide and titanium dioxide. The capsule is printed with edible black ink comprised of black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac, strong ammonia solution. Inactive ingredients in mycophenolate mofetil tablets USP 500 mg include croscarmellose sodium, povidone (K-90), isopropyl alcohol, microcrystalline cellulose, magnesium stearate, hypromellose, polyethylene glycol, titanium dioxide, red iron oxide, black iron oxide, and yellow iron oxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>55154-0180-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0180-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0180-00</NDC11Code>
<ProductNDC>55154-0180</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078040</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Risperidone is an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).</IndicationAndUsage>
<Description>Risperidone Tablets contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.49. The structural formula is. Risperidone, USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Each risperidone tablet intended for oral administration contains 0.25 mg or 0.5 mg or 1 mg or 2 mg or 3 mg or 4 mg of risperidone. Additionally each tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol, sodium lauryl sulfate, and titanium dioxide. Additionally each 0.25 mg tablet contains iron oxide red and iron oxide yellow, 0.5 mg tablet contains iron oxide red, 2 mg tablet contains FD&C yellow # 6/sunset yellow FCF aluminum lake, 3 mg tablet contains D&C yellow # 10 aluminum lake and 4 mg tablet contains D&C yellow # 10 aluminum lake and FD&C blue # 2/ indigo carmine aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>55154-0181-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0181-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0181-00</NDC11Code>
<ProductNDC>55154-0181</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
<NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250506</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209603</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.</IndicationAndUsage>
<Description>Labetalol Hydrochloride Tablets, USP are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl), USP is a racemate, chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl] benzamide monohydrochloride and it has the following structural formula. Labetalol HCl, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl, USP is a white to off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, 300 mg or 400 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55154-0182-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0182-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0182-00</NDC11Code>
<ProductNDC>55154-0182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
<NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250506</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209603</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.</IndicationAndUsage>
<Description>Labetalol Hydrochloride Tablets, USP are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl), USP is a racemate, chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl] benzamide monohydrochloride and it has the following structural formula. Labetalol HCl, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl, USP is a white to off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, 300 mg or 400 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55154-0183-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0183-0) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0183-00</NDC11Code>
<ProductNDC>55154-0183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250609</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202304</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250609</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release (SR) tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release (SR) tablets in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release (SR) tablets, USP an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO∙HCl. Bupropion hydrochloride, USP powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release (SR) tablets, USP are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake, the 150-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Red #40/Allura Red Ac Aluminum Lake, and the 200-mg tablet contains ferrosoferric oxide and iron oxide red. Meet USP Dissolution Test 7.</Description>
</NDC>
<NDC>
<NDCCode>55154-0184-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0184-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0184-00</NDC11Code>
<ProductNDC>55154-0184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
<NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250506</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209603</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.</IndicationAndUsage>
<Description>Labetalol Hydrochloride Tablets, USP are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl), USP is a racemate, chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl] benzamide monohydrochloride and it has the following structural formula. Labetalol HCl, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl, USP is a white to off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, 300 mg or 400 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55154-0186-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0186-0) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0186-00</NDC11Code>
<ProductNDC>55154-0186</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250709</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040858</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250709</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain magnesium stearate, microcrystalline cellulose, orange lake blend, silicon dioxide, and sodium starch glycolate. The orange lake blend consists of FD&C yellow #6.</Description>
</NDC>
<NDC>
<NDCCode>55154-0187-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0187-0) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0187-00</NDC11Code>
<ProductNDC>55154-0187</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250709</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040858</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250709</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain magnesium stearate, microcrystalline cellulose, orange lake blend, silicon dioxide, and sodium starch glycolate. The orange lake blend consists of FD&C yellow #6.</Description>
</NDC>
<NDC>
<NDCCode>55154-0188-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0188-0) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0188-00</NDC11Code>
<ProductNDC>55154-0188</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Loratadine</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250828</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076301</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-09-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose , 2 itchy, watery eyes, 3 sneezing , 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
</NDCList>