{
"NDC": [
{
"NDCCode": "55154-2364-5",
"PackageDescription": "5 VIAL in 1 BAG (55154-2364-5) / 2 mL in 1 VIAL",
"NDC11Code": "55154-2364-05",
"ProductNDC": "55154-2364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20100713",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018667",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100713",
"SamplePackage": "N",
"IndicationAndUsage": "FUROSEMIDE INJECTION is a loop diuretic indicated for: 1 The treatment of edema associated with heart failure, cirrhosis of the liver, and renal disease (1.1), 2 Acute pulmonary edema as adjunctive therapy (1.2).",
"Description": "Furosemide Injection contains furosemide as the active pharmaceutical ingredient. Furosemide is a loop diuretic which is an anthranilic acid derivative. Furosemide chemical name is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide is a white to slightly-yellow crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Furosemide Injection, USP 10 mg/mL is a sterile, non-pyrogenic solution, available in single-dose vials for intravenous and intramuscular injection. Each mL of Furosemide Injection contains: 10 mg of Furosemide, 7.5 mg of Sodium Chloride for isotonicity, 1.34 mg of Sodium Hydroxide, Hydrochloric Acid and Sodium Hydroxide as pH adjusters, in Water for Injection. Furosemide Injection solution pH is between 8.0 and 9.3. It contains no preservative."
},
{
"NDCCode": "55154-2364-8",
"PackageDescription": "1 VIAL in 1 BAG (55154-2364-8) > 2 mL in 1 VIAL",
"NDC11Code": "55154-2364-08",
"ProductNDC": "55154-2364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Furosemide",
"NonProprietaryName": "Furosemide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20100713",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA018667",
"LabelerName": "Cardinal Health",
"SubstanceName": "FUROSEMIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Diuresis at Loop of Henle [PE],Loop Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-11-03",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "15631-2364-5",
"PackageDescription": "500 TABLET in 1 CONTAINER (15631-2364-5)",
"NDC11Code": "15631-2364-05",
"ProductNDC": "15631-2364",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bio-combination 9",
"NonProprietaryName": "Ferrum Phosphoricum, Kali Muriaticum, Kali Phosphoricum, Magnesia Phosphorica",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160411",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Rxhomeo Private Limited d.b.a. Rxhomeo, Inc",
"SubstanceName": "FERROSOFERRIC PHOSPHATE; POTASSIUM CHLORIDE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE",
"StrengthNumber": "12; 6; 3; 6",
"StrengthUnit": "[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Condition listed above or as directed by the physician."
},
{
"NDCCode": "36987-2364-1",
"PackageDescription": "5 mL in 1 VIAL, MULTI-DOSE (36987-2364-1)",
"NDC11Code": "36987-2364-01",
"ProductNDC": "36987-2364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Redtop Grass Pollen",
"NonProprietaryName": "Standardized Redtop Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "55714-2364-0",
"PackageDescription": ".5 mL in 1 BOTTLE, GLASS (55714-2364-0)",
"NDC11Code": "55714-2364-00",
"ProductNDC": "55714-2364",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vitality",
"NonProprietaryName": "Adrenalinum, Aloe, Arsenicum Alb., Baptisia, Berber. Aqui., Berber. Vulg., Bryonia, Chelidonium Majus, Crotalus Horridus, Digitalis, Ferrum Metallicum, Glonoinum, Glycyrrhiza Glabra , Hydrocotyle, Iodium, Iris Versicolor, Lachesis, Lycopodium, Nat. Mur., Nux Vom., Rhus Toxicodendron, Ruta, Thuja Occ., Thyroidinum, Echinacea, Lappa, Solidago, Taraxacum",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20110301",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Newton Laboratories, Inc.",
"SubstanceName": "EPINEPHRINE; ALOE; ARSENIC TRIOXIDE; BAPTISIA TINCTORIA; MAHONIA AQUIFOLIUM ROOT BARK; BERBERIS VULGARIS ROOT BARK; BRYONIA ALBA ROOT; CHELIDONIUM MAJUS; CROTALUS HORRIDUS HORRIDUS VENOM; DIGITALIS; IRON; NITROGLYCERIN; GLYCYRRHIZA GLABRA; CENTELLA ASIATICA; IODINE; IRIS VERSICOLOR ROOT; LACHESIS MUTA VENOM; LYCOPODIUM CLAVATUM SPORE; SODIUM CHLORIDE; STRYCHNOS NUX-VOMICA SEED; TOXICODENDRON PUBESCENS LEAF; RUTA GRAVEOLENS FLOWERING TOP; THUJA OCCIDENTALIS LEAFY TWIG; THYROID, UNSPECIFIED; ECHINACEA, UNSPECIFIED; ARCTIUM LAPPA ROOT; SOLIDAGO VIRGAUREA FLOWERING TOP; TARAXACUM OFFICINALE",
"StrengthNumber": "15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 3; 3; 3; 3",
"StrengthUnit": "[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Vitality Formulated for symptoms associated with low energy, mild stress and weakness."
},
{
"NDCCode": "65044-2364-5",
"PackageDescription": "5 mL in 1 VIAL (65044-2364-5) ",
"NDC11Code": "65044-2364-05",
"ProductNDC": "65044-2364",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Pollens - Weeds And Garden Plants, Russian Thistle Salsola Kali",
"NonProprietaryName": "Russian Thistle Salsola Kali",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL",
"StartMarketingDate": "19410419",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103888",
"LabelerName": "Jubilant HollisterStier LLC",
"SubstanceName": "SALSOLA KALI POLLEN",
"StrengthNumber": "500",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19410419",
"SamplePackage": "N",
"IndicationAndUsage": "Certain diagnostics carry labeling which states Allergenic Extract for Diagnostic Use Only. Data to support the therapeutic use of products labeled with this statement have not been established.15. In addition to a carefully taken history, the use of intradermal testing extracts is an accepted method in the diagnosis of allergenic conditions.1, 2, 3 When scratch, prick or puncture reactions are small, or if the patient gives a history of allergic symptoms to a substance but scratch, prick or puncture tests are inconclusive, intradermal tests may be indicated. However, ANTIGENS PRODUCING LARGE 3 TO 4+ SCRATCH, PRICK OR PUNCTURE TESTS SHOULD NOT BE TESTED INTRADERMALLY. Extracts of all allergens do not produce equivalent results in intradermal testing. The intensity of the skin reaction produced will be determined by two factors: the degree of sensitivity of the patient and the nature of the antigenic extract applied. In general, pollen extracts produce whealing reactions, whereas other inhalants produce erythematous reactions with wheals less often. Skin tests to foods seldom produce whealing reactions except for infrequent instances of severe sensitivity to fish, nuts or spices, and rarely other foods.",
"Description": "Extracts for intradermal testing are supplied in sterile multi-dose vials containing, in addition to the extract allergens and antigens, 0.5% sodium chloride, 0.275% sodium bicarbonate, up to 2% glycerin, 2.5% glycerin for AP products, and, as preservative, 0.4% phenol. The strength of these extracts may be expressed in terms of:. 1. Weight to Volume (w/v) 2. Protein Nitrogen Units/mL (PNU/mL)3. Allergy Units/mL (AU/mL)4. Bioequivalent Allergy Units/mL (BAU/mL)5. Concentrate: 1 Weight to volume (w/v). For regular extracts this describes the extraction ratio, i.e., the amount of crude allergen added to the extracting fluid. A 1:10 extract, therefore, indicates that the solution contains the extracted material from one gram of raw material added to each 10 mL of extracting fluid. The amount and composition of extracted material will vary with the kind of antigen, the extracting fluid, duration of extraction, pH, temperature, and other variables. In contrast to this, AP (acetone precipitated) extracts, if present, are prepared by reconstituting dry allergenically active concentrates produced by a precipitation process from extracts of raw materials. For those AP extracts labeled on a weight per volume (w/v) basis, the strength designation indicates the dry weight of finished (acetone) precipitate per volume of reconstituting fluid. For example, 1:50 (w/v) means that each gram of dry precipitate obtained from the original extract is reconstituted in 50 mL of solution., 2 Protein Nitrogen Units per mL (PNU/mL). One protein nitrogen unit represents 0.00001 mg phosphotungstic acid-precipitable protein nitrogen dissolved in one mL of antigen extract. The PNU content of extracts of the same antigen may vary according to the method of measuring the PNU. Thus, PNU contents of extracts from different manufacturers are not comparable unless the PNU method is known to be the same and reproducible from lot to lot. Also, the amount of protein nitrogen extracted from an antigen is influenced by the same variables as the weight to volume extract. Allergenic materials make up a variable proportion of the total protein of an extract., 3 Allergy Units per mL (AU/mL). The potency of standardized AP and regular extracts labeled in Allergy Units (AU)/mL is determined by in vitro comparison to the reference standard established by the Center for Biologics Evaluation and Research (CBER) of the Food and Drug Administration., 4 Bioequivalent Allergy Units per mL(BAU/mL). When originally licensed, the Reference Preparations for standardized extracts were arbitrarily assigned 100,000 Allergy Units (AU)/mL. Subsequently, quantitative skin testing by the ID50EAL method14 was used to determine that some Reference Preparations should be assigned 10,000 AU/mL, and others 100,000 AU/mL. To avoid possible confusion about this change in the method of allergy unit assignment, the nomenclature changed for standardized extracts whose allergy units are assigned based on quantitative skin testing, and are labeled in Bioequivalent Allergy Units (BAU)/mL. References labeled 10,000 BAU/mL can be diluted one to a half million fold, and references labeled 100,000 BAU/mL can be diluted one to 5 million fold and produce a sum of erythema diameter of 50 mm when Intradermal testing highly reactive subjects., 5 Concentrate. Concentrate label terminology applies to allergenic extract mixtures, where the individual allergens being combined vary in strength or the designation of strength."
},
{
"NDCCode": "72162-2364-5",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (72162-2364-5) ",
"NDC11Code": "72162-2364-05",
"ProductNDC": "72162-2364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron Hydrochloride",
"NonProprietaryName": "Ondansetron Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078539",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240716",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.",
"Description": "The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow. Meets USP dissolution test 6."
},
{
"NDCCode": "0781-2364-01",
"PackageDescription": "100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0781-2364-01) ",
"NDC11Code": "00781-2364-01",
"ProductNDC": "0781-2364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylphenidate",
"NonProprietaryName": "Methylphenidate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20151124",
"EndMarketingDate": "20270430",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021284",
"LabelerName": "Sandoz Inc",
"SubstanceName": "METHYLPHENIDATE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-10-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20151124",
"EndMarketingDatePackage": "20261031",
"SamplePackage": "N",
"IndicationAndUsage": "Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD), in pediatric patients 6 to 12 years of age [see Clinical Studies (14)]. Limitations of Use. The use of methylphenidate hydrochloride extended release capsules is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.7), Use in Specific Populations (8.4)].",
"Description": "Methylphenidate hydrochloride extended-release capsules are CNS stimulant. Methylphenidate hydrochloride extended-release capsules is an extended-release formulation of methylphenidate for oral administration with a bi-modal release profile. Each bead-filled methylphenidate hydrochloride extended-release capsule contains half the dose as immediate-release beads and half as enteric-coated beads, thus providing an immediate release of methylphenidate and a second delayed release of methylphenidate. The active substance in methylphenidate hydrochloride extended-release capsules is methyl α-phenyl-2-piperidineacetate hydrochloride, and its structural formula is. Methylphenidate hydrochloride USP is a white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77 g/mol. Inactive ingredients: ammonio methacrylate copolymer, black iron oxide (10 and 40 mg capsules only), gelatin, methacrylic acid copolymer, polyethylene glycol, red iron oxide (10 and 40 mg capsules only), sugar spheres, talc, titanium dioxide, triethyl citrate, and yellow iron oxide (10, 30, and 40 mg capsules only)."
},
{
"NDCCode": "36987-2364-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-2364-2)",
"NDC11Code": "36987-2364-02",
"ProductNDC": "36987-2364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Redtop Grass Pollen",
"NonProprietaryName": "Standardized Redtop Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "36987-2364-3",
"PackageDescription": "30 mL in 1 VIAL, MULTI-DOSE (36987-2364-3)",
"NDC11Code": "36987-2364-03",
"ProductNDC": "36987-2364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Redtop Grass Pollen",
"NonProprietaryName": "Standardized Redtop Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "36987-2364-4",
"PackageDescription": "50 mL in 1 VIAL, MULTI-DOSE (36987-2364-4)",
"NDC11Code": "36987-2364-04",
"ProductNDC": "36987-2364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Standardized Redtop Grass Pollen",
"NonProprietaryName": "Standardized Redtop Grass Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19980210",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "AGROSTIS GIGANTEA POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[BAU]/mL",
"Pharm_Classes": "Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.",
"Description": "Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, \"due to cross reactivity, total potency may be 100,000 BAU/mL,\" will be added to the label."
},
{
"NDCCode": "50090-2364-0",
"PackageDescription": "12 BOTTLE, DROPPER in 1 CARTON (50090-2364-0) > 2 mL in 1 BOTTLE, DROPPER",
"NDC11Code": "50090-2364-00",
"ProductNDC": "50090-2364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracaine Hydrochloride",
"NonProprietaryName": "Tetracaine Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "19690328",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208135",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "TETRACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Ester Local Anesthetic [EPC],Esters [Chemical/Ingredient],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "50090-2364-1",
"PackageDescription": "4 mL in 1 BOTTLE, DROPPER (50090-2364-1) ",
"NDC11Code": "50090-2364-01",
"ProductNDC": "50090-2364",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tetracaine Hydrochloride",
"NonProprietaryName": "Tetracaine Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20161102",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208135",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "TETRACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Ester Local Anesthetic [EPC], Esters [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2025-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190923",
"SamplePackage": "N",
"IndicationAndUsage": "Tetracaine Hydrochloride Ophthalmic Solution 0.5% is indicated for procedures requiring a rapid and short-acting topical ophthalmic anesthetic.",
"Description": "Tetracaine hydrochloride is chemically designated as benzoic acid, 4-(butylamino)-,2-(dimethylamino) ethyl ester, monohydrochloride. Its chemical formula is C15H24N2O2 HCl and it is represented by the chemical structure. Tetracaine hydrochloride is a fine, white, crystalline, odorless powder and has a molecular weight of 300.82. Tetracaine Hydrochloride Ophthalmic Solution 0.5% has a pH of 3.7 to 5.5. Active ingredient: tetracaine hydrochloride 0.5% w/v (equivalent to 0.44% w/v tetracaine). Inactive ingredients: sodium chloride, sodium acetate trihydrate, acetic acid (to adjust pH approximately 4.5), Water for Injection, USP."
},
{
"NDCCode": "55154-0082-5",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (55154-0082-5) > 3 TABLET in 1 BOTTLE, PLASTIC",
"NDC11Code": "55154-0082-05",
"ProductNDC": "55154-0082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Truvada",
"NonProprietaryName": "Emtricitabine And Tenofovir Disoproxil Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20040802",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021752",
"LabelerName": "Cardinal Health",
"SubstanceName": "TENOFOVIR DISOPROXIL FUMARATE; EMTRICITABINE",
"StrengthNumber": "300; 200",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [Chemical/Ingredient],Nucleoside Reverse Transcriptase Inhibitors [MoA],Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [Chemical/Ingredient],Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-02-01",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55154-0103-5",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 BAG (55154-0103-5) > 20 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "55154-0103-05",
"ProductNDC": "55154-0103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20110908",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018803",
"LabelerName": "Cardinal Health",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2017-01-13"
},
{
"NDCCode": "55154-0120-5",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 BAG (55154-0120-5) / 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "55154-0120-05",
"ProductNDC": "55154-0120",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20110727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074802",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110727",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.",
"Description": "Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti‑inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color."
},
{
"NDCCode": "55154-0124-5",
"PackageDescription": "5 VIAL, MULTI-DOSE in 1 BAG (55154-0124-5) / 20 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "55154-0124-05",
"ProductNDC": "55154-0124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20100330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088299",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100330",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride Injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Lidocaine Hydrochloride Injection is by injection, for infiltration, nerve block, epidural and caudal use. Multiple‑dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), monohydrochloride monohydrate and has the molecular weight is of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C14H22N2OHClH2O, and has the following structural formula. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic, clear solution containing lidocaine hydrochloride and sodium chloride in water for injection for parenteral administration in various concentrations with characteristics as follows. Multiple-dose vials contain 0.1% of methylparaben added as an antiseptic preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0) [See How Supplied/Storage and Handling (16)] for various sizes and strengths. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration."
},
{
"NDCCode": "55154-0126-5",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 BAG (55154-0126-5) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "55154-0126-05",
"ProductNDC": "55154-0126",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20110908",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018803",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110908",
"SamplePackage": "N",
"IndicationAndUsage": "This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.",
"Description": "This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride and water for injection. Each mL contains sodium chloride 9 mg. It contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. 0.308 mOsmol/mL (calc.). 0.9% Sodium Chloride Injection, USP contains no preservatives. The solution may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH 5.3 (4.5 to 7.0). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The glass container is a Type I borosilicate glass and meets the requirements of the powdered glass test according to the USP standards. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration."
},
{
"NDCCode": "55154-0127-5",
"PackageDescription": "5 VIAL, PLASTIC in 1 BAG (55154-0127-5) / 10 mL in 1 VIAL, PLASTIC",
"NDC11Code": "55154-0127-05",
"ProductNDC": "55154-0127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Water",
"NonProprietaryName": "Water",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20110915",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018801",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "WATER",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110915",
"SamplePackage": "N",
"IndicationAndUsage": "This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.",
"Description": "This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sterile Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection which contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. For I.V. injection, add sufficient solute to make an approximately isotonic solution. Water for Injection, USP is chemically designated H2O. The glass vial is Type I or II borosilicate glass and meets the requirements of the powdered glass test according to the USP standards. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper labeled volume."
},
{
"NDCCode": "55154-0130-5",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 BAG (55154-0130-5) > 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "55154-0130-05",
"ProductNDC": "55154-0130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20110727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074802",
"LabelerName": "Cardinal Health",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC],Cyclooxygenase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-12-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55154-0131-5",
"PackageDescription": "5 AMPULE in 1 BAG (55154-0131-5) > 5 mL in 1 AMPULE",
"NDC11Code": "55154-0131-05",
"ProductNDC": "55154-0131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride Anhydrous",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION",
"StartMarketingDate": "20100330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080408",
"LabelerName": "Cardinal Health",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2017-12-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55154-0132-5",
"PackageDescription": "5 VIAL, MULTI-DOSE in 1 BAG (55154-0132-5) / 20 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "55154-0132-05",
"ProductNDC": "55154-0132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"NonProprietaryName": "Lidocaine Hydrochloride And Epinephrine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20100405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089644",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE; EPINEPHRINE",
"StrengthNumber": "10; 10",
"StrengthUnit": "mg/mL; ug/mL",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100405",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula."
},
{
"NDCCode": "55154-0134-5",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 BAG (55154-0134-5) > 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "55154-0134-05",
"ProductNDC": "55154-0134",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20110727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074802",
"LabelerName": "Cardinal Health",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC],Cyclooxygenase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-12-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55154-0147-5",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 BAG (55154-0147-5) > 30 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "55154-0147-05",
"ProductNDC": "55154-0147",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride Anhydrous",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20100330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088329",
"LabelerName": "Cardinal Health",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-02-06",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "55154-0149-5",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 BAG (55154-0149-5) > 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "55154-0149-05",
"ProductNDC": "55154-0149",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20110727",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074802",
"LabelerName": "Cardinal Health",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "60",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC],Cyclooxygenase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20110727",
"EndMarketingDatePackage": "20190430",
"SamplePackage": "N"
},
{
"NDCCode": "55154-0154-5",
"PackageDescription": "6 PACKET in 1 BAG (55154-0154-5) > 1 OINTMENT in 1 PACKET",
"NDC11Code": "55154-0154-05",
"ProductNDC": "55154-0154",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "White Petrolatum",
"NonProprietaryName": "White Petrolatum",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110620",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "Cardinal Health",
"SubstanceName": "PETROLATUM",
"StrengthNumber": "5",
"StrengthUnit": "g/1",
"Status": "Deprecated",
"LastUpdate": "2018-03-06",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55154-0155-5",
"PackageDescription": "6 PACKET in 1 BAG (55154-0155-5) > .9 g in 1 PACKET",
"NDC11Code": "55154-0155-05",
"ProductNDC": "55154-0155",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bacitracin Zinc",
"NonProprietaryName": "Bacitracin Zinc",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110602",
"EndMarketingDate": "20180131",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333B",
"LabelerName": "Cardinal Health",
"SubstanceName": "BACITRACIN ZINC",
"StrengthNumber": "500",
"StrengthUnit": "[USP'U]/g",
"Status": "Deprecated",
"LastUpdate": "2018-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231",
"StartMarketingDatePackage": "20110602",
"EndMarketingDatePackage": "20180131",
"SamplePackage": "N"
},
{
"NDCCode": "55154-0156-5",
"PackageDescription": "6 PACKET in 1 BLISTER PACK (55154-0156-5) > 1 OINTMENT in 1 PACKET",
"NDC11Code": "55154-0156-05",
"ProductNDC": "55154-0156",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Triple Antibiotic",
"NonProprietaryName": "Neomycin, Polymyxin B Sulfates, Bacitracin",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110606",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333B",
"LabelerName": "Cardinal Health",
"SubstanceName": "NEOMYCIN SULFATE; POLYMYXIN B SULFATE; BACITRACIN ZINC",
"StrengthNumber": "3.5; 5000; 400",
"StrengthUnit": "mg/1; [USP'U]/1; [USP'U]/1",
"Status": "Deprecated",
"LastUpdate": "2018-03-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55154-0157-6",
"PackageDescription": "6 PACKET in 1 BAG (55154-0157-6) > 5 g in 1 PACKET",
"NDC11Code": "55154-0157-06",
"ProductNDC": "55154-0157",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vitamin A And Vitamin D",
"NonProprietaryName": "Vitamin A And Vitamin D",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "19810101",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "Cardinal Health",
"SubstanceName": "PETROLATUM",
"StrengthNumber": "929.3",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
},
{
"NDCCode": "55154-0352-5",
"PackageDescription": "5 VIAL in 1 BAG (55154-0352-5) > 2 mL in 1 VIAL",
"NDC11Code": "55154-0352-05",
"ProductNDC": "55154-0352",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20000621",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075421",
"LabelerName": "Cardinal Health",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>55154-2364-5</NDCCode>
<PackageDescription>5 VIAL in 1 BAG (55154-2364-5) / 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>55154-2364-05</NDC11Code>
<ProductNDC>55154-2364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20100713</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018667</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE], Loop Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100713</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FUROSEMIDE INJECTION is a loop diuretic indicated for: 1 The treatment of edema associated with heart failure, cirrhosis of the liver, and renal disease (1.1), 2 Acute pulmonary edema as adjunctive therapy (1.2).</IndicationAndUsage>
<Description>Furosemide Injection contains furosemide as the active pharmaceutical ingredient. Furosemide is a loop diuretic which is an anthranilic acid derivative. Furosemide chemical name is 4-chloro-N-furfuryl-5-sulfamoylanthranilic acid. Furosemide is a white to slightly-yellow crystalline powder. It is practically insoluble in water, sparingly soluble in alcohol, freely soluble in dilute alkali solutions and insoluble in dilute acids. The structural formula is as follows. Furosemide Injection, USP 10 mg/mL is a sterile, non-pyrogenic solution, available in single-dose vials for intravenous and intramuscular injection. Each mL of Furosemide Injection contains: 10 mg of Furosemide, 7.5 mg of Sodium Chloride for isotonicity, 1.34 mg of Sodium Hydroxide, Hydrochloric Acid and Sodium Hydroxide as pH adjusters, in Water for Injection. Furosemide Injection solution pH is between 8.0 and 9.3. It contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>55154-2364-8</NDCCode>
<PackageDescription>1 VIAL in 1 BAG (55154-2364-8) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>55154-2364-08</NDC11Code>
<ProductNDC>55154-2364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Furosemide</ProprietaryName>
<NonProprietaryName>Furosemide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20100713</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA018667</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>FUROSEMIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Diuresis at Loop of Henle [PE],Loop Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-03</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>15631-2364-5</NDCCode>
<PackageDescription>500 TABLET in 1 CONTAINER (15631-2364-5)</PackageDescription>
<NDC11Code>15631-2364-05</NDC11Code>
<ProductNDC>15631-2364</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bio-combination 9</ProprietaryName>
<NonProprietaryName>Ferrum Phosphoricum, Kali Muriaticum, Kali Phosphoricum, Magnesia Phosphorica</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160411</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Rxhomeo Private Limited d.b.a. Rxhomeo, Inc</LabelerName>
<SubstanceName>FERROSOFERRIC PHOSPHATE; POTASSIUM CHLORIDE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM PHOSPHATE, DIBASIC TRIHYDRATE</SubstanceName>
<StrengthNumber>12; 6; 3; 6</StrengthNumber>
<StrengthUnit>[hp_X]/1; [hp_X]/1; [hp_X]/1; [hp_X]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Condition listed above or as directed by the physician.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>36987-2364-1</NDCCode>
<PackageDescription>5 mL in 1 VIAL, MULTI-DOSE (36987-2364-1)</PackageDescription>
<NDC11Code>36987-2364-01</NDC11Code>
<ProductNDC>36987-2364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Redtop Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Redtop Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>55714-2364-0</NDCCode>
<PackageDescription>.5 mL in 1 BOTTLE, GLASS (55714-2364-0)</PackageDescription>
<NDC11Code>55714-2364-00</NDC11Code>
<ProductNDC>55714-2364</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vitality</ProprietaryName>
<NonProprietaryName>Adrenalinum, Aloe, Arsenicum Alb., Baptisia, Berber. Aqui., Berber. Vulg., Bryonia, Chelidonium Majus, Crotalus Horridus, Digitalis, Ferrum Metallicum, Glonoinum, Glycyrrhiza Glabra , Hydrocotyle, Iodium, Iris Versicolor, Lachesis, Lycopodium, Nat. Mur., Nux Vom., Rhus Toxicodendron, Ruta, Thuja Occ., Thyroidinum, Echinacea, Lappa, Solidago, Taraxacum</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Newton Laboratories, Inc.</LabelerName>
<SubstanceName>EPINEPHRINE; ALOE; ARSENIC TRIOXIDE; BAPTISIA TINCTORIA; MAHONIA AQUIFOLIUM ROOT BARK; BERBERIS VULGARIS ROOT BARK; BRYONIA ALBA ROOT; CHELIDONIUM MAJUS; CROTALUS HORRIDUS HORRIDUS VENOM; DIGITALIS; IRON; NITROGLYCERIN; GLYCYRRHIZA GLABRA; CENTELLA ASIATICA; IODINE; IRIS VERSICOLOR ROOT; LACHESIS MUTA VENOM; LYCOPODIUM CLAVATUM SPORE; SODIUM CHLORIDE; STRYCHNOS NUX-VOMICA SEED; TOXICODENDRON PUBESCENS LEAF; RUTA GRAVEOLENS FLOWERING TOP; THUJA OCCIDENTALIS LEAFY TWIG; THYROID, UNSPECIFIED; ECHINACEA, UNSPECIFIED; ARCTIUM LAPPA ROOT; SOLIDAGO VIRGAUREA FLOWERING TOP; TARAXACUM OFFICINALE</SubstanceName>
<StrengthNumber>15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 15; 3; 3; 3; 3</StrengthNumber>
<StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Vitality Formulated for symptoms associated with low energy, mild stress and weakness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>65044-2364-5</NDCCode>
<PackageDescription>5 mL in 1 VIAL (65044-2364-5) </PackageDescription>
<NDC11Code>65044-2364-05</NDC11Code>
<ProductNDC>65044-2364</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Pollens - Weeds And Garden Plants, Russian Thistle Salsola Kali</ProprietaryName>
<NonProprietaryName>Russian Thistle Salsola Kali</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL</RouteName>
<StartMarketingDate>19410419</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103888</ApplicationNumber>
<LabelerName>Jubilant HollisterStier LLC</LabelerName>
<SubstanceName>SALSOLA KALI POLLEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19410419</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Certain diagnostics carry labeling which states Allergenic Extract for Diagnostic Use Only. Data to support the therapeutic use of products labeled with this statement have not been established.15. In addition to a carefully taken history, the use of intradermal testing extracts is an accepted method in the diagnosis of allergenic conditions.1, 2, 3 When scratch, prick or puncture reactions are small, or if the patient gives a history of allergic symptoms to a substance but scratch, prick or puncture tests are inconclusive, intradermal tests may be indicated. However, ANTIGENS PRODUCING LARGE 3 TO 4+ SCRATCH, PRICK OR PUNCTURE TESTS SHOULD NOT BE TESTED INTRADERMALLY. Extracts of all allergens do not produce equivalent results in intradermal testing. The intensity of the skin reaction produced will be determined by two factors: the degree of sensitivity of the patient and the nature of the antigenic extract applied. In general, pollen extracts produce whealing reactions, whereas other inhalants produce erythematous reactions with wheals less often. Skin tests to foods seldom produce whealing reactions except for infrequent instances of severe sensitivity to fish, nuts or spices, and rarely other foods.</IndicationAndUsage>
<Description>Extracts for intradermal testing are supplied in sterile multi-dose vials containing, in addition to the extract allergens and antigens, 0.5% sodium chloride, 0.275% sodium bicarbonate, up to 2% glycerin, 2.5% glycerin for AP products, and, as preservative, 0.4% phenol. The strength of these extracts may be expressed in terms of:. 1. Weight to Volume (w/v) 2. Protein Nitrogen Units/mL (PNU/mL)3. Allergy Units/mL (AU/mL)4. Bioequivalent Allergy Units/mL (BAU/mL)5. Concentrate: 1 Weight to volume (w/v). For regular extracts this describes the extraction ratio, i.e., the amount of crude allergen added to the extracting fluid. A 1:10 extract, therefore, indicates that the solution contains the extracted material from one gram of raw material added to each 10 mL of extracting fluid. The amount and composition of extracted material will vary with the kind of antigen, the extracting fluid, duration of extraction, pH, temperature, and other variables. In contrast to this, AP (acetone precipitated) extracts, if present, are prepared by reconstituting dry allergenically active concentrates produced by a precipitation process from extracts of raw materials. For those AP extracts labeled on a weight per volume (w/v) basis, the strength designation indicates the dry weight of finished (acetone) precipitate per volume of reconstituting fluid. For example, 1:50 (w/v) means that each gram of dry precipitate obtained from the original extract is reconstituted in 50 mL of solution., 2 Protein Nitrogen Units per mL (PNU/mL). One protein nitrogen unit represents 0.00001 mg phosphotungstic acid-precipitable protein nitrogen dissolved in one mL of antigen extract. The PNU content of extracts of the same antigen may vary according to the method of measuring the PNU. Thus, PNU contents of extracts from different manufacturers are not comparable unless the PNU method is known to be the same and reproducible from lot to lot. Also, the amount of protein nitrogen extracted from an antigen is influenced by the same variables as the weight to volume extract. Allergenic materials make up a variable proportion of the total protein of an extract., 3 Allergy Units per mL (AU/mL). The potency of standardized AP and regular extracts labeled in Allergy Units (AU)/mL is determined by in vitro comparison to the reference standard established by the Center for Biologics Evaluation and Research (CBER) of the Food and Drug Administration., 4 Bioequivalent Allergy Units per mL(BAU/mL). When originally licensed, the Reference Preparations for standardized extracts were arbitrarily assigned 100,000 Allergy Units (AU)/mL. Subsequently, quantitative skin testing by the ID50EAL method14 was used to determine that some Reference Preparations should be assigned 10,000 AU/mL, and others 100,000 AU/mL. To avoid possible confusion about this change in the method of allergy unit assignment, the nomenclature changed for standardized extracts whose allergy units are assigned based on quantitative skin testing, and are labeled in Bioequivalent Allergy Units (BAU)/mL. References labeled 10,000 BAU/mL can be diluted one to a half million fold, and references labeled 100,000 BAU/mL can be diluted one to 5 million fold and produce a sum of erythema diameter of 50 mm when Intradermal testing highly reactive subjects., 5 Concentrate. Concentrate label terminology applies to allergenic extract mixtures, where the individual allergens being combined vary in strength or the designation of strength.</Description>
</NDC>
<NDC>
<NDCCode>72162-2364-5</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (72162-2364-5) </PackageDescription>
<NDC11Code>72162-2364-05</NDC11Code>
<ProductNDC>72162-2364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron Hydrochloride</ProprietaryName>
<NonProprietaryName>Ondansetron Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078539</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240716</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9 g/mol. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow. Meets USP dissolution test 6.</Description>
</NDC>
<NDC>
<NDCCode>0781-2364-01</NDCCode>
<PackageDescription>100 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (0781-2364-01) </PackageDescription>
<NDC11Code>00781-2364-01</NDC11Code>
<ProductNDC>0781-2364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylphenidate</ProprietaryName>
<NonProprietaryName>Methylphenidate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151124</StartMarketingDate>
<EndMarketingDate>20270430</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021284</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>METHYLPHENIDATE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-10-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20151124</StartMarketingDatePackage>
<EndMarketingDatePackage>20261031</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylphenidate hydrochloride extended-release capsules are indicated for the treatment of Attention Deficit Hyperactivity Disorder (ADHD), in pediatric patients 6 to 12 years of age [see Clinical Studies (14)]. Limitations of Use. The use of methylphenidate hydrochloride extended release capsules is not recommended in pediatric patients younger than 6 years of age because they had higher plasma exposure and a higher incidence of adverse reactions (e.g., weight loss) than patients 6 years and older at the same dosage [see Warnings and Precautions (5.7), Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Methylphenidate hydrochloride extended-release capsules are CNS stimulant. Methylphenidate hydrochloride extended-release capsules is an extended-release formulation of methylphenidate for oral administration with a bi-modal release profile. Each bead-filled methylphenidate hydrochloride extended-release capsule contains half the dose as immediate-release beads and half as enteric-coated beads, thus providing an immediate release of methylphenidate and a second delayed release of methylphenidate. The active substance in methylphenidate hydrochloride extended-release capsules is methyl α-phenyl-2-piperidineacetate hydrochloride, and its structural formula is. Methylphenidate hydrochloride USP is a white, odorless, fine crystalline powder. Its solutions are acid to litmus. It is freely soluble in water and in methanol, soluble in alcohol, and slightly soluble in chloroform and in acetone. Its molecular weight is 269.77 g/mol. Inactive ingredients: ammonio methacrylate copolymer, black iron oxide (10 and 40 mg capsules only), gelatin, methacrylic acid copolymer, polyethylene glycol, red iron oxide (10 and 40 mg capsules only), sugar spheres, talc, titanium dioxide, triethyl citrate, and yellow iron oxide (10, 30, and 40 mg capsules only).</Description>
</NDC>
<NDC>
<NDCCode>36987-2364-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-2364-2)</PackageDescription>
<NDC11Code>36987-2364-02</NDC11Code>
<ProductNDC>36987-2364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Redtop Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Redtop Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>36987-2364-3</NDCCode>
<PackageDescription>30 mL in 1 VIAL, MULTI-DOSE (36987-2364-3)</PackageDescription>
<NDC11Code>36987-2364-03</NDC11Code>
<ProductNDC>36987-2364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Redtop Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Redtop Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>36987-2364-4</NDCCode>
<PackageDescription>50 mL in 1 VIAL, MULTI-DOSE (36987-2364-4)</PackageDescription>
<NDC11Code>36987-2364-04</NDC11Code>
<ProductNDC>36987-2364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Standardized Redtop Grass Pollen</ProprietaryName>
<NonProprietaryName>Standardized Redtop Grass Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19980210</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>AGROSTIS GIGANTEA POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[BAU]/mL</StrengthUnit>
<Pharm_Classes>Standardized Pollen Allergenic Extract [EPC],Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Standardized Pollen Extract is intended for use in the diagnosis and therapy of pollen allergic patients as established by allergy history and skin test reactivity. Standardized Grass Pollen extracts labeled in BAU/mL are not interchangeable with Grass Pollen extracts labeled in AU/mL or with non-standardized Grass Pollen extracts. The 10,000 BAU/mL dose form is indicated for percutaneous testing. If negative, 100,000 BAU/mL dose form can be used for percutaneous testing. For immunotherapy, availability of 10,000 and 100,000 BAU/mL dosages facilitates safe switching. (See Dosage & Administration). The use of standardized grass pollen extracts is indicated for hyposensitization treatment and may be used as part of the over-all management of the allergic patient. Treatment of grass sensitive patients consists of using specific standardized grass products of up to and including doses of 100,000 BAU/mL (up to 10,000 BAU/mL for Bermuda grass) or stock mixtures of standardized grass products. Stock mixtures of standardized grass extracts are particularly useful in hyposensitization treatment when multiple allergies to grasses are diagnosed. For previously untreated patients, the 10,000 BAU/mL concentrates can be used to formulate dosages. If tolerated, the concentrates can be inceased to 100,000 BAU/mL dose formulation.</IndicationAndUsage>
<Description>Standardized Grass Pollen Extracts include: Orchard (Dactylis glomerata), Perennial Rye (Lolium perenne), Timothy (Phleum pratense), Redtop (Agrostis alba), Kentucky (June) Bluegrass (Poa pratensis), Bermuda (Cynodon dactylon), Meadow Fescue (Festuca elatior), Sweet Vernal (Anthoxanthum odoratum). The standardized grass pollen extract is prepared by extracting raw pollen material at a ratio of either 1:5 w/v, 1:6.66 w/v or 1:10 w/v in Cocas fluid containing 0.5% NaCl, 0.275% NaHCO3, WFI and 0.4% phenol as preservative. Following extraction, a calculated amount of glycerin is added to make a 50%(v/v) glycerinated solution. Standardized Grass Pollen extracts have potency designations of 10,000 BAU/mL and 100,000 BAU/mL except Bermuda Grass (10,000 BAU/mL only). Extracts with a potency of 10,000 BAU/mL are diluted from the 100,000 BAU/mL lots with Glycerol Saline 50%(v/v). The Glycerol Saline 50%(v/v) solution consists of Glycerin and Salts and Buffered Diluent whose ingredients are 0.5% NaCl, 0.08% Na2HPO4, 0.036% KH2PO4, WFI and 0.4% phenol as a preservative. All extracts are aseptically filled in sterile containers. Standardized pollen extracts are intended for administration by prick-puncture or intradermal routes when used for diagnostic purposes and administered subcutaneously when used for immunotherapy injection. Standardized grass pollen extracts labeled in BAU/mL are not interchangeable with grass pollen extracts labeled in AU/mL or with non-standardized grass pollen extracts. The Bioequivalent Allergy Unit (BAU), the potency unit used for all Standardized Pollen Extracts, replaces the previous unitage for these products. Bioequivalent Allergy Units were assigned to the FDA, Center for Biologics Evaluation and Research (CBER) reference extracts, based on quantitative intradermal skin test results. BAU's are intended to assure that the labeled unitage of different allergenic extracts will correspond to the expected clinical response in sensitive patients. References labeled 10,000 BAU/mL can be diluted one half million fold to produce an intradermal sum of erythema diameter response of 50mm in highly puncture reactive subjects. 100,000 BAU/mL can be diluted 1:5 million fold to yield the same intradermal response.(2) The assignment of BAU/mL to standardized grass pollen extracts, is accomplished by an ELISA assay comparing the extract to the CBER reference. Previously, the potency / concentration of grass mixtures was designated based on the manufacturing strength, e.g. 1:10 w/v or 1:20 w/v, or in PNU's/mL. For grass mixtures containing standardized extracts, the potency will reflect the contribution of each individual component in the mixture, i.e., the actual potency of each component will be listed on a per mL basis. In addition, because the individual components may be cross-reactive, an additional caution statement, "due to cross reactivity, total potency may be 100,000 BAU/mL," will be added to the label.</Description>
</NDC>
<NDC>
<NDCCode>50090-2364-0</NDCCode>
<PackageDescription>12 BOTTLE, DROPPER in 1 CARTON (50090-2364-0) > 2 mL in 1 BOTTLE, DROPPER</PackageDescription>
<NDC11Code>50090-2364-00</NDC11Code>
<ProductNDC>50090-2364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracaine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>19690328</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208135</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>TETRACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Ester Local Anesthetic [EPC],Esters [Chemical/Ingredient],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50090-2364-1</NDCCode>
<PackageDescription>4 mL in 1 BOTTLE, DROPPER (50090-2364-1) </PackageDescription>
<NDC11Code>50090-2364-01</NDC11Code>
<ProductNDC>50090-2364</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tetracaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Tetracaine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20161102</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208135</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>TETRACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Ester Local Anesthetic [EPC], Esters [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190923</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tetracaine Hydrochloride Ophthalmic Solution 0.5% is indicated for procedures requiring a rapid and short-acting topical ophthalmic anesthetic.</IndicationAndUsage>
<Description>Tetracaine hydrochloride is chemically designated as benzoic acid, 4-(butylamino)-,2-(dimethylamino) ethyl ester, monohydrochloride. Its chemical formula is C15H24N2O2 HCl and it is represented by the chemical structure. Tetracaine hydrochloride is a fine, white, crystalline, odorless powder and has a molecular weight of 300.82. Tetracaine Hydrochloride Ophthalmic Solution 0.5% has a pH of 3.7 to 5.5. Active ingredient: tetracaine hydrochloride 0.5% w/v (equivalent to 0.44% w/v tetracaine). Inactive ingredients: sodium chloride, sodium acetate trihydrate, acetic acid (to adjust pH approximately 4.5), Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>55154-0082-5</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (55154-0082-5) > 3 TABLET in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>55154-0082-05</NDC11Code>
<ProductNDC>55154-0082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Truvada</ProprietaryName>
<NonProprietaryName>Emtricitabine And Tenofovir Disoproxil Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040802</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021752</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>TENOFOVIR DISOPROXIL FUMARATE; EMTRICITABINE</SubstanceName>
<StrengthNumber>300; 200</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [Chemical/Ingredient],Nucleoside Reverse Transcriptase Inhibitors [MoA],Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC],Nucleoside Analog [Chemical/Ingredient],Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-02-01</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55154-0103-5</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 BAG (55154-0103-5) > 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>55154-0103-05</NDC11Code>
<ProductNDC>55154-0103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20110908</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018803</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-01-13</LastUpdate>
</NDC>
<NDC>
<NDCCode>55154-0120-5</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 BAG (55154-0120-5) / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>55154-0120-05</NDC11Code>
<ProductNDC>55154-0120</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20110727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074802</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Acute Pain in Adult Patients. Ketorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.</IndicationAndUsage>
<Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti‑inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color.</Description>
</NDC>
<NDC>
<NDCCode>55154-0124-5</NDCCode>
<PackageDescription>5 VIAL, MULTI-DOSE in 1 BAG (55154-0124-5) / 20 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>55154-0124-05</NDC11Code>
<ProductNDC>55154-0124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20100330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088299</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for Lidocaine Hydrochloride Injection is by injection, for infiltration, nerve block, epidural and caudal use. Multiple‑dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl), monohydrochloride monohydrate and has the molecular weight is of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C14H22N2OHClH2O, and has the following structural formula. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic, clear solution containing lidocaine hydrochloride and sodium chloride in water for injection for parenteral administration in various concentrations with characteristics as follows. Multiple-dose vials contain 0.1% of methylparaben added as an antiseptic preservative. May contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 6.5 (5.0 to 7.0) [See How Supplied/Storage and Handling (16)] for various sizes and strengths. The semi-rigid vial used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.</Description>
</NDC>
<NDC>
<NDCCode>55154-0126-5</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 BAG (55154-0126-5) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>55154-0126-05</NDC11Code>
<ProductNDC>55154-0126</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20110908</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018803</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110908</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.</IndicationAndUsage>
<Description>This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. 0.9% Sodium Chloride Injection, USP is a sterile, nonpyrogenic, isotonic solution of sodium chloride and water for injection. Each mL contains sodium chloride 9 mg. It contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. 0.308 mOsmol/mL (calc.). 0.9% Sodium Chloride Injection, USP contains no preservatives. The solution may contain hydrochloric acid and/or sodium hydroxide for pH adjustment. pH 5.3 (4.5 to 7.0). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The glass container is a Type I borosilicate glass and meets the requirements of the powdered glass test according to the USP standards. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.</Description>
</NDC>
<NDC>
<NDCCode>55154-0127-5</NDCCode>
<PackageDescription>5 VIAL, PLASTIC in 1 BAG (55154-0127-5) / 10 mL in 1 VIAL, PLASTIC</PackageDescription>
<NDC11Code>55154-0127-05</NDC11Code>
<ProductNDC>55154-0127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Water</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20110915</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018801</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.</IndicationAndUsage>
<Description>This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sterile Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection which contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single-dose containers to dilute or dissolve drugs for injection. For I.V. injection, add sufficient solute to make an approximately isotonic solution. Water for Injection, USP is chemically designated H2O. The glass vial is Type I or II borosilicate glass and meets the requirements of the powdered glass test according to the USP standards. The semi-rigid vial is fabricated from a specially formulated polyolefin. It is a copolymer of ethylene and propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper labeled volume.</Description>
</NDC>
<NDC>
<NDCCode>55154-0130-5</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 BAG (55154-0130-5) > 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>55154-0130-05</NDC11Code>
<ProductNDC>55154-0130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20110727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074802</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC],Cyclooxygenase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55154-0131-5</NDCCode>
<PackageDescription>5 AMPULE in 1 BAG (55154-0131-5) > 5 mL in 1 AMPULE</PackageDescription>
<NDC11Code>55154-0131-05</NDC11Code>
<ProductNDC>55154-0131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION</RouteName>
<StartMarketingDate>20100330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080408</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55154-0132-5</NDCCode>
<PackageDescription>5 VIAL, MULTI-DOSE in 1 BAG (55154-0132-5) / 20 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>55154-0132-05</NDC11Code>
<ProductNDC>55154-0132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride And Epinephrine</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride And Epinephrine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20100405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089644</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE; EPINEPHRINE</SubstanceName>
<StrengthNumber>10; 10</StrengthNumber>
<StrengthUnit>mg/mL; ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride and Epinephrine Injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of Lidocaine Hydrochloride and Epinephrine Injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine Hydrochloride and Epinephrine Injection, USP is a sterile, nonpyrogenic solution of lidocaine hydrochloride and epinephrine in water for injection for parenteral administration in various concentrations with characteristics as follows. Sodium metabisulfite 0.5 mg/mL and citric acid, anhydrous 0.2 mg/mL added as stabilizers. The headspace of Lists 1209, 3177, 3178, 3181, 3182 and 3183 are nitrogen gassed. May contain sodium hydroxide and/or hydrochloric acid to adjust pH; pH is 4.5 (3.3 to 5.5). See HOW SUPPLIED section for various sizes and strengths. Multiple-dose vials contain methylparaben 1 mg/mL added as preservative. Single-dose ampuls and vials contain no bacteriostat or antimicrobial agent. Discard unused portion. Lidocaine is a local anesthetic of the amide-type. Lidocaine Hydrochloride, USP is chemically designated 2-(diethyl-amino)-2',6'-acetoxylidide monohydrochloride monohydrate, a white powder freely soluble in water. It has the following structural formula. Epinephrine is a vasoconstrictor. Epinephrine, USP is a sympathomimetic (adrenergic) agent designated chemically as 4-[1-hydroxy-2 (methylamino) ethyl]-1,2 benzenediol, a white, microcrystalline powder. It has the following structural formula.</Description>
</NDC>
<NDC>
<NDCCode>55154-0134-5</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 BAG (55154-0134-5) > 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>55154-0134-05</NDC11Code>
<ProductNDC>55154-0134</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20110727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074802</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC],Cyclooxygenase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55154-0147-5</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 BAG (55154-0147-5) > 30 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>55154-0147-05</NDC11Code>
<ProductNDC>55154-0147</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20100330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088329</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Antiarrhythmic [EPC],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-02-06</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55154-0149-5</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 BAG (55154-0149-5) > 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>55154-0149-05</NDC11Code>
<ProductNDC>55154-0149</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20110727</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074802</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC],Cyclooxygenase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110727</StartMarketingDatePackage>
<EndMarketingDatePackage>20190430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55154-0154-5</NDCCode>
<PackageDescription>6 PACKET in 1 BAG (55154-0154-5) > 1 OINTMENT in 1 PACKET</PackageDescription>
<NDC11Code>55154-0154-05</NDC11Code>
<ProductNDC>55154-0154</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>White Petrolatum</ProprietaryName>
<NonProprietaryName>White Petrolatum</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110620</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>PETROLATUM</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-03-06</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55154-0155-5</NDCCode>
<PackageDescription>6 PACKET in 1 BAG (55154-0155-5) > .9 g in 1 PACKET</PackageDescription>
<NDC11Code>55154-0155-05</NDC11Code>
<ProductNDC>55154-0155</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bacitracin Zinc</ProprietaryName>
<NonProprietaryName>Bacitracin Zinc</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110602</StartMarketingDate>
<EndMarketingDate>20180131</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333B</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>BACITRACIN ZINC</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>[USP'U]/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110602</StartMarketingDatePackage>
<EndMarketingDatePackage>20180131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55154-0156-5</NDCCode>
<PackageDescription>6 PACKET in 1 BLISTER PACK (55154-0156-5) > 1 OINTMENT in 1 PACKET</PackageDescription>
<NDC11Code>55154-0156-05</NDC11Code>
<ProductNDC>55154-0156</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Triple Antibiotic</ProprietaryName>
<NonProprietaryName>Neomycin, Polymyxin B Sulfates, Bacitracin</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110606</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333B</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>NEOMYCIN SULFATE; POLYMYXIN B SULFATE; BACITRACIN ZINC</SubstanceName>
<StrengthNumber>3.5; 5000; 400</StrengthNumber>
<StrengthUnit>mg/1; [USP'U]/1; [USP'U]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-03-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55154-0157-6</NDCCode>
<PackageDescription>6 PACKET in 1 BAG (55154-0157-6) > 5 g in 1 PACKET</PackageDescription>
<NDC11Code>55154-0157-06</NDC11Code>
<ProductNDC>55154-0157</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vitamin A And Vitamin D</ProprietaryName>
<NonProprietaryName>Vitamin A And Vitamin D</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19810101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>PETROLATUM</SubstanceName>
<StrengthNumber>929.3</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>55154-0352-5</NDCCode>
<PackageDescription>5 VIAL in 1 BAG (55154-0352-5) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>55154-0352-05</NDC11Code>
<ProductNDC>55154-0352</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20000621</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075421</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [Chemical/Ingredient]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
</NDCList>