{
"NDC": [
{
"NDCCode": "55154-5074-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-5074-0) / 1 TABLET in 1 BLISTER PACK",
"NDC11Code": "55154-5074-00",
"ProductNDC": "55154-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070325",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2026-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20091120",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-Chloro-1,3-dihydro-1-methyl-5-phenyl-2 H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The molecular formula is C 16H 13ClN 2O and the molecular weight is 284.7. The structural formula is as follows. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam, USP. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The 5 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake. The 10 mg tablets also contain D&C Yellow No. 10 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake."
},
{
"NDCCode": "51927-5074-0",
"PackageDescription": "1 kg in 1 CONTAINER (51927-5074-0)",
"NDC11Code": "51927-5074-00",
"ProductNDC": "51927-5074",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Cannabidiol",
"DosageFormName": "CONCENTRATE",
"StartMarketingDate": "20200204",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Professional Compounding Centers of America dba PCCA",
"SubstanceName": "CANNABIDIOL",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20211231"
},
{
"NDCCode": "54868-5074-0",
"PackageDescription": "60 TABLET in 1 BOTTLE (54868-5074-0)",
"NDC11Code": "54868-5074-00",
"ProductNDC": "54868-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Flecainide Acetate",
"NonProprietaryName": "Flecainide Acetate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20040630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076278",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "FLECAINIDE ACETATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiarrhythmic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "In patients without structural heart disease, Flecainide Acetate Tablets, USP are indicated for the prevention of. paroxysmal supraventricular tachycardias (PSVT), including atrioventricular nodal reentrant tachycardia, atrioventricular reentrant tachycardia and other supraventricular tachycardias of unspecified mechanism associated with disabling symptoms. paroxysmal atrial fibrillation/flutter (PAF) associated with disabling symptoms. Flecainide Acetate Tablets, USP are also indicated for the prevention of. documented ventricular arrhythmias, such as sustained ventricular tachycardia (sustained VT), that in the judgment of the physician are life-threatening. Use of Flecainide Acetate Tablets, USP for the treatment of sustained VT, like other antiarrhythmics, should be initiated in the hospital. The use of flecainide acetate is not recommended in patients with less severe ventricular arrhythmias even if the patients are symptomatic. Because of the proarrhythmic effects of Flecainide Acetate Tablets, USP, its use should be reserved for patients in whom, in the opinion of the physician, the benefits of treatment outweigh the risks. Flecainide Acetate Tablets, USP should not be used in patients with recent myocardial infarction. (See Boxed WARNINGS.). Use of Flecainide Acetate Tablets, USP in chronic atrial fibrillation has not been adequately studied and is not recommended. (See Boxed WARNINGS.). As is the case for other antiarrhythmic agents, there is no evidence from controlled trials that the use of flecainide acetate favorably affects survival or the incidence of sudden death.",
"Description": "Flecainide Acetate Tablets, USP are an antiarrhythmic drug available in tablets of 50, 100 or 150 mg for oral administration. Flecainide acetate is benzamide, N-(2-piperidinylmethyl)-2,5-bis (2,2,2-trifluoroethoxy)- monoacetate. The structural formula is given below. Flecainide acetate is a white crystalline substance with a pKa of 9.3. It has an aqueous solubility of 48.4 mg/mL at 37°C. Flecainide Acetate Tablets, USP also contain: hydrogenated cottonseed oil, magnesium stearate, microcrystalline cellulose, modified cellulose gum, and pregelatinized starch."
},
{
"NDCCode": "63629-5074-0",
"PackageDescription": "42 TABLET in 1 BOTTLE (63629-5074-0) ",
"NDC11Code": "63629-5074-00",
"ProductNDC": "63629-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hcl And Naloxone Hcl",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20130222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203136",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240402",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "63629-5074-1",
"PackageDescription": "30 TABLET in 1 BOTTLE (63629-5074-1) ",
"NDC11Code": "63629-5074-01",
"ProductNDC": "63629-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hcl And Naloxone Hcl",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20130222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203136",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240402",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "63629-5074-2",
"PackageDescription": "60 TABLET in 1 BOTTLE (63629-5074-2) ",
"NDC11Code": "63629-5074-02",
"ProductNDC": "63629-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hcl And Naloxone Hcl",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20130222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203136",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240402",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "63629-5074-3",
"PackageDescription": "90 TABLET in 1 BOTTLE (63629-5074-3) ",
"NDC11Code": "63629-5074-03",
"ProductNDC": "63629-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hcl And Naloxone Hcl",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20130222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203136",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240402",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "63629-5074-4",
"PackageDescription": "120 TABLET in 1 BOTTLE (63629-5074-4) ",
"NDC11Code": "63629-5074-04",
"ProductNDC": "63629-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hcl And Naloxone Hcl",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20130222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203136",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240402",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "63629-5074-5",
"PackageDescription": "14 TABLET in 1 BOTTLE (63629-5074-5) ",
"NDC11Code": "63629-5074-05",
"ProductNDC": "63629-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hcl And Naloxone Hcl",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20130222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203136",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240402",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "63629-5074-6",
"PackageDescription": "28 TABLET in 1 BOTTLE (63629-5074-6) ",
"NDC11Code": "63629-5074-06",
"ProductNDC": "63629-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hcl And Naloxone Hcl",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20130222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203136",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240402",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "63629-5074-7",
"PackageDescription": "6 TABLET in 1 BOTTLE (63629-5074-7) ",
"NDC11Code": "63629-5074-07",
"ProductNDC": "63629-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hcl And Naloxone Hcl",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20130222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203136",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240402",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "63629-5074-8",
"PackageDescription": "10 TABLET in 1 BOTTLE (63629-5074-8) ",
"NDC11Code": "63629-5074-08",
"ProductNDC": "63629-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hcl And Naloxone Hcl",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20130222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203136",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240402",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "63629-5074-9",
"PackageDescription": "21 TABLET in 1 BOTTLE (63629-5074-9) ",
"NDC11Code": "63629-5074-09",
"ProductNDC": "63629-5074",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buprenorphine Hcl And Naloxone Hcl",
"NonProprietaryName": "Buprenorphine And Naloxone",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20130222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203136",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE",
"StrengthNumber": "8; 2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240402",
"SamplePackage": "N",
"IndicationAndUsage": "Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.",
"Description": "Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether."
},
{
"NDCCode": "85512-5074-1",
"PackageDescription": "1 g in 1 BOTTLE (85512-5074-1) ",
"NDC11Code": "85512-5074-01",
"ProductNDC": "85512-5074",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Hydroxypropyl Betadex",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Qingdao Qinzeyuan Biotechnology Co., Ltd.",
"SubstanceName": "HYDROXYPROPYLBETADEX (0.58-0.68 MS)",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-08-05",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "01-JAN-24"
},
{
"NDCCode": "85512-5074-2",
"PackageDescription": "5 g in 1 BAG (85512-5074-2) ",
"NDC11Code": "85512-5074-02",
"ProductNDC": "85512-5074",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Hydroxypropyl Betadex",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Qingdao Qinzeyuan Biotechnology Co., Ltd.",
"SubstanceName": "HYDROXYPROPYLBETADEX (0.58-0.68 MS)",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-08-05",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "01-JAN-24"
},
{
"NDCCode": "85512-5074-3",
"PackageDescription": "10 g in 1 BAG (85512-5074-3) ",
"NDC11Code": "85512-5074-03",
"ProductNDC": "85512-5074",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Hydroxypropyl Betadex",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Qingdao Qinzeyuan Biotechnology Co., Ltd.",
"SubstanceName": "HYDROXYPROPYLBETADEX (0.58-0.68 MS)",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-08-05",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "01-JAN-24"
},
{
"NDCCode": "85512-5074-4",
"PackageDescription": "50 g in 1 BAG (85512-5074-4) ",
"NDC11Code": "85512-5074-04",
"ProductNDC": "85512-5074",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Hydroxypropyl Betadex",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Qingdao Qinzeyuan Biotechnology Co., Ltd.",
"SubstanceName": "HYDROXYPROPYLBETADEX (0.58-0.68 MS)",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-08-05",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "01-JAN-24"
},
{
"NDCCode": "85512-5074-5",
"PackageDescription": "100 g in 1 BAG (85512-5074-5) ",
"NDC11Code": "85512-5074-05",
"ProductNDC": "85512-5074",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Hydroxypropyl Betadex",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Qingdao Qinzeyuan Biotechnology Co., Ltd.",
"SubstanceName": "HYDROXYPROPYLBETADEX (0.58-0.68 MS)",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-08-05",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "01-JAN-24"
},
{
"NDCCode": "85512-5074-6",
"PackageDescription": "500 g in 1 BAG (85512-5074-6) ",
"NDC11Code": "85512-5074-06",
"ProductNDC": "85512-5074",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Hydroxypropyl Betadex",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Qingdao Qinzeyuan Biotechnology Co., Ltd.",
"SubstanceName": "HYDROXYPROPYLBETADEX (0.58-0.68 MS)",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-08-05",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "01-JAN-24"
},
{
"NDCCode": "85512-5074-7",
"PackageDescription": "1000 g in 1 BAG (85512-5074-7) ",
"NDC11Code": "85512-5074-07",
"ProductNDC": "85512-5074",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Hydroxypropyl Betadex",
"DosageFormName": "POWDER",
"StartMarketingDate": "20240101",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Qingdao Qinzeyuan Biotechnology Co., Ltd.",
"SubstanceName": "HYDROXYPROPYLBETADEX (0.58-0.68 MS)",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-08-05",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "01-JAN-24"
},
{
"NDCCode": "55154-0109-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0109-0) > 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0109-00",
"ProductNDC": "55154-0109",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Biaxin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19911031",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050662",
"LabelerName": "Cardinal Health",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-03-14",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55154-0113-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0113-0) > 1 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "55154-0113-00",
"ProductNDC": "55154-0113",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Depakote",
"NonProprietaryName": "Divalproex Sodium",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100607",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019680",
"LabelerName": "Cardinal Health",
"SubstanceName": "DIVALPROEX SODIUM",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
},
{
"NDCCode": "55154-0158-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0158-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0158-00",
"ProductNDC": "55154-0158",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin",
"NonProprietaryName": "Rosuvastatin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250714",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207616",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250714",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are indicated: To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor. As an adjunct to diet to: Reduce low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia. Reduce LDL-C and slow the progression of atherosclerosis in adults. Reduce LDL-C in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia. Hypertriglyceridemia.",
"Description": "Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is (3R, 5S, 6E) -7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6-heptenoic acid calcium salt with the following structural formula:. The molecular formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white or almost white hygroscopic powder that is sparingly soluble in methanol, slightly soluble in water, practically insoluble in anhydrous ethanol. Rosuvastatin tablets USP for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: Each tablet contains: crospovidone, FD&C blue #2/indigo carmine aluminum lake, FD&C red #40/allura red AC aluminum lake, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, talc, titanium dioxide and triacetin. Additionally 5 mg tablets contain FD&C yellow #5/tartrazine aluminum lake and 10 mg, 20 mg and 40 mg tablets contain FD&C yellow #6/sunset yellow FCF aluminum lake. USP Dissolution test is pending."
},
{
"NDCCode": "55154-0159-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0159-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0159-00",
"ProductNDC": "55154-0159",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin",
"NonProprietaryName": "Rosuvastatin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20251016",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207616",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251016",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets are indicated: To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor. As an adjunct to diet to: Reduce low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia. Reduce LDL-C and slow the progression of atherosclerosis in adults. Reduce LDL-C in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia. Hypertriglyceridemia.",
"Description": "Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is (3R, 5S, 6E) -7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6-heptenoic acid calcium salt with the following structural formula:. The molecular formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white or almost white hygroscopic powder that is sparingly soluble in methanol, slightly soluble in water, practically insoluble in anhydrous ethanol. Rosuvastatin tablets USP for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: Each tablet contains: crospovidone, FD&C blue #2/indigo carmine aluminum lake, FD&C red #40/allura red AC aluminum lake, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, talc, titanium dioxide and triacetin. Additionally 5 mg tablets contain FD&C yellow #5/tartrazine aluminum lake and 10 mg, 20 mg and 40 mg tablets contain FD&C yellow #6/sunset yellow FCF aluminum lake. USP Dissolution test is pending."
},
{
"NDCCode": "55154-0160-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0160-0) / 1 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "55154-0160-00",
"ProductNDC": "55154-0160",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Celecoxib",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260710",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204519",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260710",
"SamplePackage": "N",
"IndicationAndUsage": "Celecoxib is indicated.",
"Description": "Celecoxib is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)-3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C 17H 14F 3N 3O 2S, and it has the following chemical structure. Celecoxib is a white or almost white crystalline powder with a pKa of about 11 (sulfonamide moiety). Celecoxib is hydrophobic (log P is 3.5) and soluble to freely soluble in ethanol, soluble in methylene chloride, practically insoluble in water. The inactive ingredients in celecoxib capsule include: croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone, sodium lauryl sulfate, titanium dioxide and gelatin. Details of non-volatile components of the imprinting ink are given below. 50 mg capsule contains shellac, propylene glycol and red iron oxide. 100 mg capsule contains shellac, propylene glycol and FD & C Blue No. # 2 aluminum lake. 200 mg capsule contains shellac, propylene glycol and yellow iron oxide. 400 mg capsule contains shellac, propylene glycol, titanium dioxide, yellow iron oxide and FD & C Blue No. # 2 aluminum lake."
},
{
"NDCCode": "55154-0161-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0161-0) / 1 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "55154-0161-00",
"ProductNDC": "55154-0161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mycophenolate Mofetil",
"NonProprietaryName": "Mycophenolate Mofetil",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260914",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200197",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "MYCOPHENOLATE MOFETIL",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-09-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260914",
"SamplePackage": "N",
"IndicationAndUsage": "Mycophenolate mofetil (MMF) is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.",
"Description": "Mycophenolate mofetil is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C 23H 31NO 7, a molecular weight of 433.50, and the following structural formula:. Mycophenolate mofetil is a white to off-white crystalline powder. It is slightly soluble in water (43 mcg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. Mycophenolate mofetil is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of mycophenolate mofetil. Inactive ingredients in Mycophenolate mofetil capsules USP 250 mg include croscarmellose sodium, pregelatinized starch, povidone (K-90), isopropyl alcohol and magnesium stearate. The capsule shells contain gelatin, sodium lauryl sulphate, FD&C blue 2, red iron oxide, yellow iron oxide and titanium dioxide. The capsule is printed with edible black ink comprised of black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac, strong ammonia solution. Inactive ingredients in mycophenolate mofetil tablets USP 500 mg include croscarmellose sodium, povidone (K-90), isopropyl alcohol, microcrystalline cellulose, magnesium stearate, hypromellose, polyethylene glycol, titanium dioxide, red iron oxide, black iron oxide, and yellow iron oxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "55154-0180-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0180-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0180-00",
"ProductNDC": "55154-0180",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250519",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078040",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250519",
"SamplePackage": "N",
"IndicationAndUsage": "Risperidone is an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).",
"Description": "Risperidone Tablets contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.49. The structural formula is. Risperidone, USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Each risperidone tablet intended for oral administration contains 0.25 mg or 0.5 mg or 1 mg or 2 mg or 3 mg or 4 mg of risperidone. Additionally each tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol, sodium lauryl sulfate, and titanium dioxide. Additionally each 0.25 mg tablet contains iron oxide red and iron oxide yellow, 0.5 mg tablet contains iron oxide red, 2 mg tablet contains FD&C yellow # 6/sunset yellow FCF aluminum lake, 3 mg tablet contains D&C yellow # 10 aluminum lake and 4 mg tablet contains D&C yellow # 10 aluminum lake and FD&C blue # 2/ indigo carmine aluminum lake."
},
{
"NDCCode": "55154-0181-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0181-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0181-00",
"ProductNDC": "55154-0181",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Labetalol Hydrochloride",
"NonProprietaryName": "Labetalol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250506",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209603",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "LABETALOL HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250506",
"SamplePackage": "N",
"IndicationAndUsage": "Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.",
"Description": "Labetalol Hydrochloride Tablets, USP are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl), USP is a racemate, chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl] benzamide monohydrochloride and it has the following structural formula. Labetalol HCl, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl, USP is a white to off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, 300 mg or 400 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "55154-0182-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0182-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "55154-0182-00",
"ProductNDC": "55154-0182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Labetalol Hydrochloride",
"NonProprietaryName": "Labetalol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250506",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209603",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "LABETALOL HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250506",
"SamplePackage": "N",
"IndicationAndUsage": "Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.",
"Description": "Labetalol Hydrochloride Tablets, USP are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl), USP is a racemate, chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl] benzamide monohydrochloride and it has the following structural formula. Labetalol HCl, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl, USP is a white to off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, 300 mg or 400 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide."
},
{
"NDCCode": "55154-0183-0",
"PackageDescription": "10 BLISTER PACK in 1 BAG (55154-0183-0) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "55154-0183-00",
"ProductNDC": "55154-0183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "Sr",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20250609",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202304",
"LabelerName": "Cardinal Health 107, LLC",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250609",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release (SR) tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release (SR) tablets in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].",
"Description": "Bupropion hydrochloride extended-release (SR) tablets, USP an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO∙HCl. Bupropion hydrochloride, USP powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release (SR) tablets, USP are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake, the 150-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Red #40/Allura Red Ac Aluminum Lake, and the 200-mg tablet contains ferrosoferric oxide and iron oxide red. Meet USP Dissolution Test 7."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>55154-5074-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-5074-0) / 1 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-5074-00</NDC11Code>
<ProductNDC>55154-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070325</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam tablets are indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam tablets may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. Diazepam tablets are a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma), spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia), athetosis, and stiff-man syndrome. Oral diazepam tablets may be used adjunctively in convulsive disorders, although it has not proved useful as the sole therapy. The effectiveness of diazepam tablets in long-term use, that is, more than 4 months, has not been assessed by systematic clinical studies. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. The chemical name of diazepam is 7-Chloro-1,3-dihydro-1-methyl-5-phenyl-2 H-1,4-benzodiazepin-2-one. It is a colorless to light yellow crystalline compound, insoluble in water. The molecular formula is C 16H 13ClN 2O and the molecular weight is 284.7. The structural formula is as follows. Diazepam is available for oral administration as tablets containing 2 mg, 5 mg or 10 mg diazepam, USP. In addition to the active ingredient diazepam, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The 5 mg tablets also contain FD&C Yellow No. 6 Aluminum Lake. The 10 mg tablets also contain D&C Yellow No. 10 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>51927-5074-0</NDCCode>
<PackageDescription>1 kg in 1 CONTAINER (51927-5074-0)</PackageDescription>
<NDC11Code>51927-5074-00</NDC11Code>
<ProductNDC>51927-5074</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Cannabidiol</NonProprietaryName>
<DosageFormName>CONCENTRATE</DosageFormName>
<StartMarketingDate>20200204</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Professional Compounding Centers of America dba PCCA</LabelerName>
<SubstanceName>CANNABIDIOL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>54868-5074-0</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (54868-5074-0)</PackageDescription>
<NDC11Code>54868-5074-00</NDC11Code>
<ProductNDC>54868-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Flecainide Acetate</ProprietaryName>
<NonProprietaryName>Flecainide Acetate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040630</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076278</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>FLECAINIDE ACETATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiarrhythmic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>In patients without structural heart disease, Flecainide Acetate Tablets, USP are indicated for the prevention of. paroxysmal supraventricular tachycardias (PSVT), including atrioventricular nodal reentrant tachycardia, atrioventricular reentrant tachycardia and other supraventricular tachycardias of unspecified mechanism associated with disabling symptoms. paroxysmal atrial fibrillation/flutter (PAF) associated with disabling symptoms. Flecainide Acetate Tablets, USP are also indicated for the prevention of. documented ventricular arrhythmias, such as sustained ventricular tachycardia (sustained VT), that in the judgment of the physician are life-threatening. Use of Flecainide Acetate Tablets, USP for the treatment of sustained VT, like other antiarrhythmics, should be initiated in the hospital. The use of flecainide acetate is not recommended in patients with less severe ventricular arrhythmias even if the patients are symptomatic. Because of the proarrhythmic effects of Flecainide Acetate Tablets, USP, its use should be reserved for patients in whom, in the opinion of the physician, the benefits of treatment outweigh the risks. Flecainide Acetate Tablets, USP should not be used in patients with recent myocardial infarction. (See Boxed WARNINGS.). Use of Flecainide Acetate Tablets, USP in chronic atrial fibrillation has not been adequately studied and is not recommended. (See Boxed WARNINGS.). As is the case for other antiarrhythmic agents, there is no evidence from controlled trials that the use of flecainide acetate favorably affects survival or the incidence of sudden death.</IndicationAndUsage>
<Description>Flecainide Acetate Tablets, USP are an antiarrhythmic drug available in tablets of 50, 100 or 150 mg for oral administration. Flecainide acetate is benzamide, N-(2-piperidinylmethyl)-2,5-bis (2,2,2-trifluoroethoxy)- monoacetate. The structural formula is given below. Flecainide acetate is a white crystalline substance with a pKa of 9.3. It has an aqueous solubility of 48.4 mg/mL at 37°C. Flecainide Acetate Tablets, USP also contain: hydrogenated cottonseed oil, magnesium stearate, microcrystalline cellulose, modified cellulose gum, and pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>63629-5074-0</NDCCode>
<PackageDescription>42 TABLET in 1 BOTTLE (63629-5074-0) </PackageDescription>
<NDC11Code>63629-5074-00</NDC11Code>
<ProductNDC>63629-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hcl And Naloxone Hcl</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20130222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203136</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>63629-5074-1</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (63629-5074-1) </PackageDescription>
<NDC11Code>63629-5074-01</NDC11Code>
<ProductNDC>63629-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hcl And Naloxone Hcl</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20130222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203136</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>63629-5074-2</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (63629-5074-2) </PackageDescription>
<NDC11Code>63629-5074-02</NDC11Code>
<ProductNDC>63629-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hcl And Naloxone Hcl</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20130222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203136</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>63629-5074-3</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (63629-5074-3) </PackageDescription>
<NDC11Code>63629-5074-03</NDC11Code>
<ProductNDC>63629-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hcl And Naloxone Hcl</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20130222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203136</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>63629-5074-4</NDCCode>
<PackageDescription>120 TABLET in 1 BOTTLE (63629-5074-4) </PackageDescription>
<NDC11Code>63629-5074-04</NDC11Code>
<ProductNDC>63629-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hcl And Naloxone Hcl</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20130222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203136</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>63629-5074-5</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE (63629-5074-5) </PackageDescription>
<NDC11Code>63629-5074-05</NDC11Code>
<ProductNDC>63629-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hcl And Naloxone Hcl</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20130222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203136</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>63629-5074-6</NDCCode>
<PackageDescription>28 TABLET in 1 BOTTLE (63629-5074-6) </PackageDescription>
<NDC11Code>63629-5074-06</NDC11Code>
<ProductNDC>63629-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hcl And Naloxone Hcl</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20130222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203136</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>63629-5074-7</NDCCode>
<PackageDescription>6 TABLET in 1 BOTTLE (63629-5074-7) </PackageDescription>
<NDC11Code>63629-5074-07</NDC11Code>
<ProductNDC>63629-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hcl And Naloxone Hcl</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20130222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203136</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>63629-5074-8</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (63629-5074-8) </PackageDescription>
<NDC11Code>63629-5074-08</NDC11Code>
<ProductNDC>63629-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hcl And Naloxone Hcl</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20130222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203136</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>63629-5074-9</NDCCode>
<PackageDescription>21 TABLET in 1 BOTTLE (63629-5074-9) </PackageDescription>
<NDC11Code>63629-5074-09</NDC11Code>
<ProductNDC>63629-5074</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buprenorphine Hcl And Naloxone Hcl</ProprietaryName>
<NonProprietaryName>Buprenorphine And Naloxone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20130222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203136</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>BUPRENORPHINE HYDROCHLORIDE; NALOXONE HYDROCHLORIDE DIHYDRATE</SubstanceName>
<StrengthNumber>8; 2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA], Partial Opioid Agonist [EPC], Partial Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240402</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buprenorphine and Naloxone Sublingual Tablets are indicated for the maintenance treatment of opioid dependence. Buprenorphine and Naloxone Sublingual Tablets should be used as part of a complete treatment plan that includes counseling and psychosocial support.</IndicationAndUsage>
<Description>Buprenorphine and naloxone sublingual tablet USP, 2 mg/0.5 mg is an orange, round, biconvex tablet debossed “A” on one side and “14” on the other side. Buprenorphine and naloxone sublingual tablet USP, 8 mg/2 mg is an orange, round, biconvex tablet debossed “AN 415” on one side and plain on the other side. They contain buprenorphine HCl, USP, a partial agonist at the mu-opioid receptor, and naloxone HCl dihydrate, USP, an opioid receptor antagonist, at a ratio of 4:1 (ratio of free bases). It is intended for sublingual administration and is available in two dosage strengths, 2 mg buprenorphine with 0.5 mg naloxone and 8 mg buprenorphine with 2 mg naloxone. Each sublingual tablet also contains the following inactive ingredients: acesulfame potassium, anhydrous citric acid, artificial lemon flavor, FD&C Yellow No. 6 Aluminum Lake, lactose monohydrate, magnesium stearate, mannitol, povidone, sodium citrate and starch (corn starch). Chemically, buprenorphine HCl, USP is (2S)-2-[17-Cyclopropylmethyl-4,5α-epoxy-3-hydroxy-6-methoxy-6α,14-ethano-14α-morphinan-7α-yl]-3,3-dimethylbutan-2-ol hydrochloride. It has the following chemical structure:. Buprenorphine HCl, USP has the molecular formula C29H41NO4 HCl and the molecular weight is 504.10. It is a white or off-white crystalline powder, sparingly soluble in water, freely soluble in methanol, soluble in alcohol, and practically insoluble in cyclohexane. Chemically, naloxone HCl dihydrate, USP is 17-Allyl-4, 5 α -epoxy-3, 14-dihydroxymorphinan-6-one hydrochloride dihydrate. It has the following chemical structure:. Naloxone hydrochloride dihydrate, USP has the molecular formula C19H21NO4 HCl 2H2O and the molecular weight is 399.87. It is a white to slightly off-white powder and is freely soluble in water, soluble in alcohol, and practically insoluble in toluene and ether.</Description>
</NDC>
<NDC>
<NDCCode>85512-5074-1</NDCCode>
<PackageDescription>1 g in 1 BOTTLE (85512-5074-1) </PackageDescription>
<NDC11Code>85512-5074-01</NDC11Code>
<ProductNDC>85512-5074</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Hydroxypropyl Betadex</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Qingdao Qinzeyuan Biotechnology Co., Ltd.</LabelerName>
<SubstanceName>HYDROXYPROPYLBETADEX (0.58-0.68 MS)</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-08-05</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-JAN-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>85512-5074-2</NDCCode>
<PackageDescription>5 g in 1 BAG (85512-5074-2) </PackageDescription>
<NDC11Code>85512-5074-02</NDC11Code>
<ProductNDC>85512-5074</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Hydroxypropyl Betadex</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Qingdao Qinzeyuan Biotechnology Co., Ltd.</LabelerName>
<SubstanceName>HYDROXYPROPYLBETADEX (0.58-0.68 MS)</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-08-05</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-JAN-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>85512-5074-3</NDCCode>
<PackageDescription>10 g in 1 BAG (85512-5074-3) </PackageDescription>
<NDC11Code>85512-5074-03</NDC11Code>
<ProductNDC>85512-5074</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Hydroxypropyl Betadex</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Qingdao Qinzeyuan Biotechnology Co., Ltd.</LabelerName>
<SubstanceName>HYDROXYPROPYLBETADEX (0.58-0.68 MS)</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-08-05</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-JAN-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>85512-5074-4</NDCCode>
<PackageDescription>50 g in 1 BAG (85512-5074-4) </PackageDescription>
<NDC11Code>85512-5074-04</NDC11Code>
<ProductNDC>85512-5074</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Hydroxypropyl Betadex</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Qingdao Qinzeyuan Biotechnology Co., Ltd.</LabelerName>
<SubstanceName>HYDROXYPROPYLBETADEX (0.58-0.68 MS)</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-08-05</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-JAN-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>85512-5074-5</NDCCode>
<PackageDescription>100 g in 1 BAG (85512-5074-5) </PackageDescription>
<NDC11Code>85512-5074-05</NDC11Code>
<ProductNDC>85512-5074</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Hydroxypropyl Betadex</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Qingdao Qinzeyuan Biotechnology Co., Ltd.</LabelerName>
<SubstanceName>HYDROXYPROPYLBETADEX (0.58-0.68 MS)</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-08-05</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-JAN-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>85512-5074-6</NDCCode>
<PackageDescription>500 g in 1 BAG (85512-5074-6) </PackageDescription>
<NDC11Code>85512-5074-06</NDC11Code>
<ProductNDC>85512-5074</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Hydroxypropyl Betadex</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Qingdao Qinzeyuan Biotechnology Co., Ltd.</LabelerName>
<SubstanceName>HYDROXYPROPYLBETADEX (0.58-0.68 MS)</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-08-05</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-JAN-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>85512-5074-7</NDCCode>
<PackageDescription>1000 g in 1 BAG (85512-5074-7) </PackageDescription>
<NDC11Code>85512-5074-07</NDC11Code>
<ProductNDC>85512-5074</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Hydroxypropyl Betadex</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20240101</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Qingdao Qinzeyuan Biotechnology Co., Ltd.</LabelerName>
<SubstanceName>HYDROXYPROPYLBETADEX (0.58-0.68 MS)</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-08-05</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-JAN-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>55154-0109-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0109-0) > 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0109-00</NDC11Code>
<ProductNDC>55154-0109</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Biaxin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19911031</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050662</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [Chemical/Ingredient],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-03-14</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55154-0113-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0113-0) > 1 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0113-00</NDC11Code>
<ProductNDC>55154-0113</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Depakote</ProprietaryName>
<NonProprietaryName>Divalproex Sodium</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100607</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019680</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>DIVALPROEX SODIUM</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC],Decreased Central Nervous System Disorganized Electrical Activity [PE],Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>55154-0158-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0158-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0158-00</NDC11Code>
<ProductNDC>55154-0158</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin</ProprietaryName>
<NonProprietaryName>Rosuvastatin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250714</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207616</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250714</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are indicated: To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor. As an adjunct to diet to: Reduce low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia. Reduce LDL-C and slow the progression of atherosclerosis in adults. Reduce LDL-C in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia. Hypertriglyceridemia.</IndicationAndUsage>
<Description>Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is (3R, 5S, 6E) -7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6-heptenoic acid calcium salt with the following structural formula:. The molecular formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white or almost white hygroscopic powder that is sparingly soluble in methanol, slightly soluble in water, practically insoluble in anhydrous ethanol. Rosuvastatin tablets USP for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: Each tablet contains: crospovidone, FD&C blue #2/indigo carmine aluminum lake, FD&C red #40/allura red AC aluminum lake, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, talc, titanium dioxide and triacetin. Additionally 5 mg tablets contain FD&C yellow #5/tartrazine aluminum lake and 10 mg, 20 mg and 40 mg tablets contain FD&C yellow #6/sunset yellow FCF aluminum lake. USP Dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>55154-0159-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0159-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0159-00</NDC11Code>
<ProductNDC>55154-0159</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin</ProprietaryName>
<NonProprietaryName>Rosuvastatin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251016</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207616</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251016</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets are indicated: To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults without established coronary heart disease who are at increased risk of CV disease based on age, high-sensitivity C-reactive protein (hsCRP) ≥2 mg/L, and at least one additional CV risk factor. As an adjunct to diet to: Reduce low-density lipoprotein cholesterol (LDL-C) in adults with primary hyperlipidemia. Reduce LDL-C and slow the progression of atherosclerosis in adults. Reduce LDL-C in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH). As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH). As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia. Hypertriglyceridemia.</IndicationAndUsage>
<Description>Rosuvastatin is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium is (3R, 5S, 6E) -7-[4-(4-Fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl)amino]-5-pyrimidinyl]-3,5-dihydroxy-6-heptenoic acid calcium salt with the following structural formula:. The molecular formula for rosuvastatin calcium is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a white or almost white hygroscopic powder that is sparingly soluble in methanol, slightly soluble in water, practically insoluble in anhydrous ethanol. Rosuvastatin tablets USP for oral administration contain 5, 10, 20, or 40 mg of rosuvastatin and the following inactive ingredients: Each tablet contains: crospovidone, FD&C blue #2/indigo carmine aluminum lake, FD&C red #40/allura red AC aluminum lake, hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium bicarbonate, talc, titanium dioxide and triacetin. Additionally 5 mg tablets contain FD&C yellow #5/tartrazine aluminum lake and 10 mg, 20 mg and 40 mg tablets contain FD&C yellow #6/sunset yellow FCF aluminum lake. USP Dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>55154-0160-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0160-0) / 1 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0160-00</NDC11Code>
<ProductNDC>55154-0160</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Celecoxib</ProprietaryName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260710</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204519</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260710</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Celecoxib is indicated.</IndicationAndUsage>
<Description>Celecoxib is a nonsteroidal anti-inflammatory drug, available as capsules containing 50 mg, 100 mg, 200 mg and 400 mg celecoxib for oral administration. The chemical name is 4-[5-(4-methylphenyl)-3-(trifluoromethyl)-1H-pyrazol-1-yl] benzenesulfonamide and is a diaryl-substituted pyrazole. The molecular weight is 381.38. Its molecular formula is C 17H 14F 3N 3O 2S, and it has the following chemical structure. Celecoxib is a white or almost white crystalline powder with a pKa of about 11 (sulfonamide moiety). Celecoxib is hydrophobic (log P is 3.5) and soluble to freely soluble in ethanol, soluble in methylene chloride, practically insoluble in water. The inactive ingredients in celecoxib capsule include: croscarmellose sodium, lactose monohydrate, magnesium stearate, povidone, sodium lauryl sulfate, titanium dioxide and gelatin. Details of non-volatile components of the imprinting ink are given below. 50 mg capsule contains shellac, propylene glycol and red iron oxide. 100 mg capsule contains shellac, propylene glycol and FD & C Blue No. # 2 aluminum lake. 200 mg capsule contains shellac, propylene glycol and yellow iron oxide. 400 mg capsule contains shellac, propylene glycol, titanium dioxide, yellow iron oxide and FD & C Blue No. # 2 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>55154-0161-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0161-0) / 1 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0161-00</NDC11Code>
<ProductNDC>55154-0161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mycophenolate Mofetil</ProprietaryName>
<NonProprietaryName>Mycophenolate Mofetil</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260914</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200197</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>MYCOPHENOLATE MOFETIL</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260914</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mycophenolate mofetil (MMF) is indicated for the prophylaxis of organ rejection, in adult and pediatric recipients 3 months of age and older of allogeneic kidney [see Clinical Studies (14.1)], heart [see Clinical Studies (14.2)] or liver transplants [see Clinical Studies (14.3)], in combination with other immunosuppressants.</IndicationAndUsage>
<Description>Mycophenolate mofetil is an antimetabolite immunosuppressant. It is the 2-morpholinoethyl ester of mycophenolic acid (MPA), an immunosuppressive agent; inosine monophosphate dehydrogenase (IMPDH) inhibitor. The chemical name for mycophenolate mofetil (MMF) is 2-morpholinoethyl (E)-6-(1,3-dihydro-4-hydroxy-6-methoxy-7-methyl-3-oxo-5-isobenzofuranyl)-4-methyl-4-hexenoate. It has an empirical formula of C 23H 31NO 7, a molecular weight of 433.50, and the following structural formula:. Mycophenolate mofetil is a white to off-white crystalline powder. It is slightly soluble in water (43 mcg/mL at pH 7.4); the solubility increases in acidic medium (4.27 mg/mL at pH 3.6). It is freely soluble in acetone, soluble in methanol, and sparingly soluble in ethanol. The apparent partition coefficient in 1-octanol/water (pH 7.4) buffer solution is 238. The pKa values for MMF are 5.6 for the morpholino group and 8.5 for the phenolic group. Mycophenolate mofetil is available for oral administration as capsules containing 250 mg of MMF, tablets containing 500 mg of mycophenolate mofetil. Inactive ingredients in Mycophenolate mofetil capsules USP 250 mg include croscarmellose sodium, pregelatinized starch, povidone (K-90), isopropyl alcohol and magnesium stearate. The capsule shells contain gelatin, sodium lauryl sulphate, FD&C blue 2, red iron oxide, yellow iron oxide and titanium dioxide. The capsule is printed with edible black ink comprised of black iron oxide, butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, shellac, strong ammonia solution. Inactive ingredients in mycophenolate mofetil tablets USP 500 mg include croscarmellose sodium, povidone (K-90), isopropyl alcohol, microcrystalline cellulose, magnesium stearate, hypromellose, polyethylene glycol, titanium dioxide, red iron oxide, black iron oxide, and yellow iron oxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>55154-0180-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0180-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0180-00</NDC11Code>
<ProductNDC>55154-0180</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250519</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078040</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Risperidone is an atypical antipsychotic indicated for: 1 Treatment of schizophrenia (1.1), 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder (1.2), 3 Treatment of irritability associated with autistic disorder (1.3).</IndicationAndUsage>
<Description>Risperidone Tablets contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O2 and its molecular weight is 410.49. The structural formula is. Risperidone, USP is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Each risperidone tablet intended for oral administration contains 0.25 mg or 0.5 mg or 1 mg or 2 mg or 3 mg or 4 mg of risperidone. Additionally each tablet also contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, propylene glycol, sodium lauryl sulfate, and titanium dioxide. Additionally each 0.25 mg tablet contains iron oxide red and iron oxide yellow, 0.5 mg tablet contains iron oxide red, 2 mg tablet contains FD&C yellow # 6/sunset yellow FCF aluminum lake, 3 mg tablet contains D&C yellow # 10 aluminum lake and 4 mg tablet contains D&C yellow # 10 aluminum lake and FD&C blue # 2/ indigo carmine aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>55154-0181-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0181-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0181-00</NDC11Code>
<ProductNDC>55154-0181</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
<NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250506</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209603</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.</IndicationAndUsage>
<Description>Labetalol Hydrochloride Tablets, USP are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl), USP is a racemate, chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl] benzamide monohydrochloride and it has the following structural formula. Labetalol HCl, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl, USP is a white to off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, 300 mg or 400 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55154-0182-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0182-0) / 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0182-00</NDC11Code>
<ProductNDC>55154-0182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
<NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250506</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209603</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Labetalol HCl tablets are indicated in the management of hypertension. Labetalol HCl tablets may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.</IndicationAndUsage>
<Description>Labetalol Hydrochloride Tablets, USP are adrenergic receptor blocking agents that have both selective alpha1-adrenergic and non-selective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride (HCl), USP is a racemate, chemically designated as 2-hydroxy-5-[1-hydroxy-2-[(1-methyl-3-phenylpropyl) amino] ethyl] benzamide monohydrochloride and it has the following structural formula. Labetalol HCl, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R,R' stereoisomer, makes up 25% of racemic labetalol. Labetalol HCl, USP is a white to off-white crystalline powder, soluble in water. Each tablet, for oral administration, contains 100 mg, 200 mg, 300 mg or 400 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, polyethylene glycol, polysorbate 80, sodium starch glycolate and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>55154-0183-0</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 BAG (55154-0183-0) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55154-0183-00</NDC11Code>
<ProductNDC>55154-0183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>Sr</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250609</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202304</ApplicationNumber>
<LabelerName>Cardinal Health 107, LLC</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250609</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release (SR) tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)]. The efficacy of bupropion hydrochloride extended-release (SR) tablets in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release (SR) tablets, USP an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO∙HCl. Bupropion hydrochloride, USP powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release (SR) tablets, USP are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride, USP and the inactive ingredients: cysteine hydrochloride, hypromellose, magnesium stearate, microcrystalline cellulose, talc and titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake, the 150-mg tablet contains FD&C Blue #2/Indigo Carmine Aluminum Lake and FD&C Red #40/Allura Red Ac Aluminum Lake, and the 200-mg tablet contains ferrosoferric oxide and iron oxide red. Meet USP Dissolution Test 7.</Description>
</NDC>
</NDCList>