{
"NDC": [
{
"NDCCode": "55648-764-02",
"PackageDescription": "10 VIAL in 1 CARTON (55648-764-02) > 5 mL in 1 VIAL (55648-764-06)",
"NDC11Code": "55648-0764-02",
"ProductNDC": "55648-764",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20081110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078511",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Midazolam hydrochloride injection, USP is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.",
"Description": "Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam USP compounded with 0.8% sodium chloride. The pH is approximately 3 (2.5 to 3.5) and is adjusted with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCI is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo [1,5-a] [1,4] benzodiazepine hydrochloride. Midazolam hydrochloride has the chemical formula C18H13CIFN3·HCI, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "55648-764-01",
"PackageDescription": "10 VIAL in 1 CARTON (55648-764-01) > 2 mL in 1 VIAL (55648-764-05)",
"NDC11Code": "55648-0764-01",
"ProductNDC": "55648-764",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20081110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078511",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Midazolam hydrochloride injection, USP is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.",
"Description": "Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam USP compounded with 0.8% sodium chloride. The pH is approximately 3 (2.5 to 3.5) and is adjusted with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCI is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo [1,5-a] [1,4] benzodiazepine hydrochloride. Midazolam hydrochloride has the chemical formula C18H13CIFN3·HCI, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "55648-764-03",
"PackageDescription": "25 VIAL in 1 CARTON (55648-764-03) > 2 mL in 1 VIAL (55648-764-05)",
"NDC11Code": "55648-0764-03",
"ProductNDC": "55648-764",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20081110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078511",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Midazolam hydrochloride injection, USP is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.",
"Description": "Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam USP compounded with 0.8% sodium chloride. The pH is approximately 3 (2.5 to 3.5) and is adjusted with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCI is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo [1,5-a] [1,4] benzodiazepine hydrochloride. Midazolam hydrochloride has the chemical formula C18H13CIFN3·HCI, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "55648-764-04",
"PackageDescription": "25 VIAL in 1 CARTON (55648-764-04) > 5 mL in 1 VIAL (55648-764-06)",
"NDC11Code": "55648-0764-04",
"ProductNDC": "55648-764",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20081110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078511",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Midazolam hydrochloride injection, USP is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.",
"Description": "Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam USP compounded with 0.8% sodium chloride. The pH is approximately 3 (2.5 to 3.5) and is adjusted with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCI is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo [1,5-a] [1,4] benzodiazepine hydrochloride. Midazolam hydrochloride has the chemical formula C18H13CIFN3·HCI, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "13537-764-02",
"PackageDescription": "1 TUBE in 1 BOX (13537-764-02) > 2.2 g in 1 TUBE (13537-764-01)",
"NDC11Code": "13537-0764-02",
"ProductNDC": "13537-764",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esika Pro Perfect Match Volumen",
"ProprietaryNameSuffix": "(burgundy Vital) - Red",
"NonProprietaryName": "Octinoxate",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150710",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "OCTINOXATE",
"StrengthNumber": ".075",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "36800-764-02",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (36800-764-02) > 10 TABLET, COATED in 1 BLISTER PACK",
"NDC11Code": "36800-0764-02",
"ProductNDC": "36800-764",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mucus Relief Cold, Flu And Sore Throat",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, And Phenylephrine Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170731",
"EndMarketingDate": "20220831",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "TopCo Associates LLC",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 10; 200; 5",
"StrengthUnit": "mg/1; mg/1; mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20170731",
"EndMarketingDatePackage": "20220831",
"SamplePackage": "N"
},
{
"NDCCode": "43353-764-02",
"PackageDescription": "2 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-764-02) ",
"NDC11Code": "43353-0764-02",
"ProductNDC": "43353-764",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Viagra",
"NonProprietaryName": "Sildenafil Citrate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19980327",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020895",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "SILDENAFIL CITRATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20111120",
"SamplePackage": "N",
"IndicationAndUsage": "VIAGRA is indicated for the treatment of erectile dysfunction.",
"Description": "VIAGRA (sildenafil citrate), an oral therapy for erectile dysfunction, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo[4,3-d]pyrimidin-5-yl)-4-ethoxyphenyl]sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white to off-white crystalline powder with a solubility of 3.5 mg/mL in water and a molecular weight of 666.7. VIAGRA is formulated as blue, film-coated rounded-diamond-shaped tablets equivalent to 25 mg, 50 mg and 100 mg of sildenafil for oral administration. In addition to the active ingredient, sildenafil citrate, each tablet contains the following inactive ingredients: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, magnesium stearate, hypromellose, titanium dioxide, lactose, triacetin, and FD & C Blue #2 aluminum lake."
},
{
"NDCCode": "43598-764-02",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (43598-764-02) / 2.5 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "43598-0764-02",
"ProductNDC": "43598-764",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Olopatadine Hydrochloride Ophthalmic Solution",
"NonProprietaryName": "Olopatadine Hydrochloride Ophthalmic",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20200901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209752",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "OLOPATADINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200901",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves itchy eyes due to pollen, ragweed, grass, animal hair and dander."
},
{
"NDCCode": "52125-764-02",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (52125-764-02)",
"NDC11Code": "52125-0764-02",
"ProductNDC": "52125-764",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glipizideer",
"ProprietaryNameSuffix": "Er",
"NonProprietaryName": "Glipizide",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20151102",
"EndMarketingDate": "20170225",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076467",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "GLIPIZIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea [EPC],Sulfonylurea Compounds [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-01-18"
},
{
"NDCCode": "57297-764-02",
"PackageDescription": "500 TABLET in 1 BOTTLE (57297-764-02)",
"NDC11Code": "57297-0764-02",
"ProductNDC": "57297-764",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine And Valsartan",
"NonProprietaryName": "Amlodipine And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090245",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "AMLODIPINE BESYLATE; VALSARTAN",
"StrengthNumber": "5; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Amlodipine and valsartan tablet is the combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB), and valsartan, an angiotensin II receptor blocker (ARB). Amlodipine and valsartan tablets are indicated for the treatment of hypertension, to lower blood pressure: 1 In patients not adequately controlled on monotherapy (1), 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1).",
"Description": "Amlodipine and valsartan tablet is a fixed combination of amlodipine and valsartan. Amlodipine and valsartan tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate's chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is. Its empirical formula is C20H25ClN2O5C6H6O3S and its molecular weight is 567.1. Valsartan is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to practically white fine powder, soluble in ethanol and methanol and slightly soluble in water. Valsartan’s chemical name is N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl]methyl]-L-valine; its structural formula is. Its empirical formula is C24H29N5O3 and its molecular weight is 435.5. Amlodipine and valsartan tablets are formulated in 4 strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 160 mg, or 320 mg of valsartan providing for the following available combinations: 5/160 mg, 10/160 mg, 5/320 mg, and 10/320 mg. The inactive ingredients for all strengths of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, magnesium stearate and microcrystalline cellulose. The film coating contains hypromellose, polyethylene glycol, iron oxide yellow and titanium dioxide. Additionally, the 5/160 mg and 5/320 mg strengths contain iron oxide red."
},
{
"NDCCode": "61786-764-02",
"PackageDescription": "100 TABLET in 1 BLISTER PACK (61786-764-02)",
"NDC11Code": "61786-0764-02",
"ProductNDC": "61786-764",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160628",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-02-13"
},
{
"NDCCode": "63285-764-02",
"PackageDescription": "100 BOTTLE, PLASTIC in 1 CASE (63285-764-02) > 100 CAPSULE in 1 BOTTLE, PLASTIC (63285-764-01)",
"NDC11Code": "63285-0764-02",
"ProductNDC": "63285-764",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"StartMarketingDate": "19970912",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Patheon Inc.",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "63545-764-02",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (63545-764-02) ",
"NDC11Code": "63545-0764-02",
"ProductNDC": "63545-764",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Aethusa Cynapium",
"NonProprietaryName": "Aethusa Cynapium",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20191218",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, Inc.",
"SubstanceName": "AETHUSA CYNAPIUM",
"StrengthNumber": "200",
"StrengthUnit": "[hp_C]/1",
"Status": "Active",
"LastUpdate": "2025-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191218",
"SamplePackage": "N"
},
{
"NDCCode": "63998-764-02",
"PackageDescription": "750 mL in 1 BOTTLE (63998-764-02) ",
"NDC11Code": "63998-0764-02",
"ProductNDC": "63998-764",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Alcohol-free Hand Sanitizing Foam",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "United Laboratories Inc.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2024-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N",
"IndicationAndUsage": "For hand sanitizing to decrease bacteria on the skin. Recommended for repeated use."
},
{
"NDCCode": "64679-764-02",
"PackageDescription": "10 VIAL in 1 CARTON (64679-764-02) > 5 mL in 1 VIAL (64679-764-06) ",
"NDC11Code": "64679-0764-02",
"ProductNDC": "64679-764",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Midazolam Hydrochloride",
"NonProprietaryName": "Midazolam Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20081110",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078511",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "MIDAZOLAM HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Midazolam hydrochloride injection, USP is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam hydrochloride can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.",
"Description": "Midazolam hydrochloride injection, USP is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam USP compounded with 0.8% sodium chloride. The pH is approximately 3 (2.5 to 3.5) and is adjusted with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the chemical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form."
},
{
"NDCCode": "68180-764-02",
"PackageDescription": "500 TABLET in 1 BOTTLE (68180-764-02) ",
"NDC11Code": "68180-0764-02",
"ProductNDC": "68180-764",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine And Valsartan",
"NonProprietaryName": "Amlodipine And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090245",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; VALSARTAN",
"StrengthNumber": "5; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-10-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150331",
"SamplePackage": "N"
},
{
"NDCCode": "81110-764-02",
"PackageDescription": "1 BOTTLE, DROPPER in 1 CARTON (81110-764-02) / 30 mL in 1 BOTTLE, DROPPER (81110-764-01) ",
"NDC11Code": "81110-0764-02",
"ProductNDC": "81110-764",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ilia Super Serum Skin Tint (st16 Pavones)",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200120",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Ilia, Inc.",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "132",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-05-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200120",
"SamplePackage": "N"
},
{
"NDCCode": "55648-006-02",
"PackageDescription": "10 kg in 1 CONTAINER (55648-006-02)",
"NDC11Code": "55648-0006-02",
"ProductNDC": "55648-006",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Dextromethorphan Hydrobromide",
"DosageFormName": "POWDER",
"StartMarketingDate": "19960418",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "WOCKHARDT LIMITED",
"SubstanceName": "DEXTROMETHORPHAN HYDROBROMIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55648-059-02",
"PackageDescription": "15 kg in 1 CONTAINER (55648-059-02)",
"NDC11Code": "55648-0059-02",
"ProductNDC": "55648-059",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Fexofenadine Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20061030",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "FEXOFENADINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55648-065-02",
"PackageDescription": "5 kg in 1 CONTAINER (55648-065-02)",
"NDC11Code": "55648-0065-02",
"ProductNDC": "55648-065",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Paliperidone Micronized",
"DosageFormName": "POWDER",
"StartMarketingDate": "20140830",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55648-101-02",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (55648-101-02)",
"NDC11Code": "55648-0101-02",
"ProductNDC": "55648-101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "(sr)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201331",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.",
"Description": "Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ammonium chloride, colloidal silicon dioxide, glyceryl behenate, hydroxy propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2."
},
{
"NDCCode": "55648-102-02",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (55648-102-02)",
"NDC11Code": "55648-0102-02",
"ProductNDC": "55648-102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "(xl)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20121121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202189",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (XL) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD) and prevention of seasonal affective disorder (SAD). Periodically reevaluate long-term usefulness for the individual patient. (1).",
"Description": "Bupropion hydrochloride, an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO HCl. Bupropion hydrochloride powder is white, crystalline, and soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg white to off white extended-release tablets. Each tablet contains the abelled amount of bupropion hydrochloride and the inactive ingredients: ammonium chloride, colloidal silicon dioxide, ethyl cellulose, eudragit L30D55, glyceryl behenate, iron oxide black, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, propylene glycol, silicon dioxide, shellac glaze, talc, titanium dioxide, triethyl citrate. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. USP dissolution test is pending."
},
{
"NDCCode": "55648-105-02",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (55648-105-02)",
"NDC11Code": "55648-0105-02",
"ProductNDC": "55648-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "(sr)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201331",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.",
"Description": "Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ammonium chloride, colloidal silicon dioxide, glyceryl behenate, hydroxy propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2."
},
{
"NDCCode": "55648-107-02",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (55648-107-02)",
"NDC11Code": "55648-0107-02",
"ProductNDC": "55648-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "(sr)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120830",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201331",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.",
"Description": "Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ammonium chloride, colloidal silicon dioxide, glyceryl behenate, hydroxy propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2."
},
{
"NDCCode": "55648-153-02",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (55648-153-02)",
"NDC11Code": "55648-0153-02",
"ProductNDC": "55648-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090216",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Valacyclovir hydrochloride is a nucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients (1.1). ● Cold Sores (Herpes Labialis). ● Genital Herpes. ● Treatment in immunocompetent patients (initial or recurrent episode). ● Suppression in immunocompetent or HIV-infected patients. ● Reduction of transmission. ● Herpes Zoster. Pediatric Patients (1.2). ● Cold Sores (Herpes Labialis). ● Chickenpox. Limitations of Use (1.3). ● The efficacy and safety of valacyclovir hydrochloride tablets have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of L-valyl ester of the antiviral drug acyclovir. Valacyclovir hydrochloride tablets are for oral administration. Each tablet contains valacyclovir hydrochloride equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients croscarmellose sodium, FD&C Blue No. 2 aluminium lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride is a white to off-white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pkas for valacyclovir hydrochloride are 1.90, 7.47, and 9.43."
},
{
"NDCCode": "55648-154-02",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (55648-154-02)",
"NDC11Code": "55648-0154-02",
"ProductNDC": "55648-154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Ropinirole tablets are indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease. The effectiveness of ropinirole tablet was demonstrated in randomized, controlled trials in patients with early Parkinson's disease who were not receiving concomitant L-dopa therapy as well as in patients with advanced disease on concomitant L-dopa (see CLINICAL PHARMACOLOGY: Clinical Trials).",
"Description": "Ropinirole hydrochloride is an orally administered non-ergoline dopamine agonist. It is the hydrochloride salt of 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one monohydrochloride and has an molecular formula of C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg meet, USP Dissolution Test 2."
},
{
"NDCCode": "55648-155-02",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (55648-155-02)",
"NDC11Code": "55648-0155-02",
"ProductNDC": "55648-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Ropinirole tablets are indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease. The effectiveness of ropinirole tablet was demonstrated in randomized, controlled trials in patients with early Parkinson's disease who were not receiving concomitant L-dopa therapy as well as in patients with advanced disease on concomitant L-dopa (see CLINICAL PHARMACOLOGY: Clinical Trials).",
"Description": "Ropinirole hydrochloride is an orally administered non-ergoline dopamine agonist. It is the hydrochloride salt of 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one monohydrochloride and has an molecular formula of C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg meet, USP Dissolution Test 2."
},
{
"NDCCode": "55648-171-02",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (55648-171-02)",
"NDC11Code": "55648-0171-02",
"ProductNDC": "55648-171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Ropinirole tablets are indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease. The effectiveness of ropinirole tablet was demonstrated in randomized, controlled trials in patients with early Parkinson's disease who were not receiving concomitant L-dopa therapy as well as in patients with advanced disease on concomitant L-dopa (see CLINICAL PHARMACOLOGY: Clinical Trials).",
"Description": "Ropinirole hydrochloride is an orally administered non-ergoline dopamine agonist. It is the hydrochloride salt of 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one monohydrochloride and has an molecular formula of C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg meet, USP Dissolution Test 2."
},
{
"NDCCode": "55648-172-02",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (55648-172-02)",
"NDC11Code": "55648-0172-02",
"ProductNDC": "55648-172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Ropinirole tablets are indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease. The effectiveness of ropinirole tablet was demonstrated in randomized, controlled trials in patients with early Parkinson's disease who were not receiving concomitant L-dopa therapy as well as in patients with advanced disease on concomitant L-dopa (see CLINICAL PHARMACOLOGY: Clinical Trials).",
"Description": "Ropinirole hydrochloride is an orally administered non-ergoline dopamine agonist. It is the hydrochloride salt of 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one monohydrochloride and has an molecular formula of C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg meet, USP Dissolution Test 2."
},
{
"NDCCode": "55648-174-02",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (55648-174-02)",
"NDC11Code": "55648-0174-02",
"ProductNDC": "55648-174",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Ropinirole tablets are indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease. The effectiveness of ropinirole tablet was demonstrated in randomized, controlled trials in patients with early Parkinson's disease who were not receiving concomitant L-dopa therapy as well as in patients with advanced disease on concomitant L-dopa (see CLINICAL PHARMACOLOGY: Clinical Trials).",
"Description": "Ropinirole hydrochloride is an orally administered non-ergoline dopamine agonist. It is the hydrochloride salt of 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one monohydrochloride and has an molecular formula of C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg meet, USP Dissolution Test 2."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>55648-764-02</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (55648-764-02) > 5 mL in 1 VIAL (55648-764-06)</PackageDescription>
<NDC11Code>55648-0764-02</NDC11Code>
<ProductNDC>55648-764</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20081110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078511</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Midazolam hydrochloride injection, USP is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
<Description>Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam USP compounded with 0.8% sodium chloride. The pH is approximately 3 (2.5 to 3.5) and is adjusted with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCI is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo [1,5-a] [1,4] benzodiazepine hydrochloride. Midazolam hydrochloride has the chemical formula C18H13CIFN3·HCI, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>55648-764-01</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (55648-764-01) > 2 mL in 1 VIAL (55648-764-05)</PackageDescription>
<NDC11Code>55648-0764-01</NDC11Code>
<ProductNDC>55648-764</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20081110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078511</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Midazolam hydrochloride injection, USP is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
<Description>Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam USP compounded with 0.8% sodium chloride. The pH is approximately 3 (2.5 to 3.5) and is adjusted with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCI is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo [1,5-a] [1,4] benzodiazepine hydrochloride. Midazolam hydrochloride has the chemical formula C18H13CIFN3·HCI, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>55648-764-03</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (55648-764-03) > 2 mL in 1 VIAL (55648-764-05)</PackageDescription>
<NDC11Code>55648-0764-03</NDC11Code>
<ProductNDC>55648-764</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20081110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078511</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Midazolam hydrochloride injection, USP is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
<Description>Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam USP compounded with 0.8% sodium chloride. The pH is approximately 3 (2.5 to 3.5) and is adjusted with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCI is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo [1,5-a] [1,4] benzodiazepine hydrochloride. Midazolam hydrochloride has the chemical formula C18H13CIFN3·HCI, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>55648-764-04</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (55648-764-04) > 5 mL in 1 VIAL (55648-764-06)</PackageDescription>
<NDC11Code>55648-0764-04</NDC11Code>
<ProductNDC>55648-764</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20081110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078511</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Midazolam hydrochloride injection, USP is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
<Description>Midazolam hydrochloride is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam USP compounded with 0.8% sodium chloride. The pH is approximately 3 (2.5 to 3.5) and is adjusted with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCI is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo [1,5-a] [1,4] benzodiazepine hydrochloride. Midazolam hydrochloride has the chemical formula C18H13CIFN3·HCI, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed-ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>13537-764-02</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-764-02) > 2.2 g in 1 TUBE (13537-764-01)</PackageDescription>
<NDC11Code>13537-0764-02</NDC11Code>
<ProductNDC>13537-764</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esika Pro Perfect Match Volumen</ProprietaryName>
<ProprietaryNameSuffix>(burgundy Vital) - Red</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150710</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>OCTINOXATE</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>36800-764-02</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (36800-764-02) > 10 TABLET, COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>36800-0764-02</NDC11Code>
<ProductNDC>36800-764</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mucus Relief Cold, Flu And Sore Throat</ProprietaryName>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hydrobromide, Guaifenesin, And Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170731</StartMarketingDate>
<EndMarketingDate>20220831</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>TopCo Associates LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 10; 200; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20170731</StartMarketingDatePackage>
<EndMarketingDatePackage>20220831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43353-764-02</NDCCode>
<PackageDescription>2 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-764-02) </PackageDescription>
<NDC11Code>43353-0764-02</NDC11Code>
<ProductNDC>43353-764</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Viagra</ProprietaryName>
<NonProprietaryName>Sildenafil Citrate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19980327</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020895</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>SILDENAFIL CITRATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phosphodiesterase 5 Inhibitor [EPC], Phosphodiesterase 5 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VIAGRA is indicated for the treatment of erectile dysfunction.</IndicationAndUsage>
<Description>VIAGRA (sildenafil citrate), an oral therapy for erectile dysfunction, is the citrate salt of sildenafil, a selective inhibitor of cyclic guanosine monophosphate (cGMP)-specific phosphodiesterase type 5 (PDE5). Sildenafil citrate is designated chemically as 1-[[3-(6,7-dihydro-1-methyl-7-oxo-3-propyl-1H-pyrazolo[4,3-d]pyrimidin-5-yl)-4-ethoxyphenyl]sulfonyl]-4-methylpiperazine citrate and has the following structural formula. Sildenafil citrate is a white to off-white crystalline powder with a solubility of 3.5 mg/mL in water and a molecular weight of 666.7. VIAGRA is formulated as blue, film-coated rounded-diamond-shaped tablets equivalent to 25 mg, 50 mg and 100 mg of sildenafil for oral administration. In addition to the active ingredient, sildenafil citrate, each tablet contains the following inactive ingredients: microcrystalline cellulose, anhydrous dibasic calcium phosphate, croscarmellose sodium, magnesium stearate, hypromellose, titanium dioxide, lactose, triacetin, and FD & C Blue #2 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>43598-764-02</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (43598-764-02) / 2.5 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>43598-0764-02</NDC11Code>
<ProductNDC>43598-764</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Olopatadine Hydrochloride Ophthalmic Solution</ProprietaryName>
<NonProprietaryName>Olopatadine Hydrochloride Ophthalmic</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20200901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209752</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>OLOPATADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Decreased Histamine Release [PE], Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC], Histamine-1 Receptor Inhibitor [EPC], Mast Cell Stabilizer [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves itchy eyes due to pollen, ragweed, grass, animal hair and dander.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>52125-764-02</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (52125-764-02)</PackageDescription>
<NDC11Code>52125-0764-02</NDC11Code>
<ProductNDC>52125-764</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glipizideer</ProprietaryName>
<ProprietaryNameSuffix>Er</ProprietaryNameSuffix>
<NonProprietaryName>Glipizide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151102</StartMarketingDate>
<EndMarketingDate>20170225</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076467</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>GLIPIZIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea [EPC],Sulfonylurea Compounds [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>57297-764-02</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (57297-764-02)</PackageDescription>
<NDC11Code>57297-0764-02</NDC11Code>
<ProductNDC>57297-764</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine And Valsartan</ProprietaryName>
<NonProprietaryName>Amlodipine And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090245</ApplicationNumber>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; VALSARTAN</SubstanceName>
<StrengthNumber>5; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Amlodipine and valsartan tablet is the combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB), and valsartan, an angiotensin II receptor blocker (ARB). Amlodipine and valsartan tablets are indicated for the treatment of hypertension, to lower blood pressure: 1 In patients not adequately controlled on monotherapy (1), 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1).</IndicationAndUsage>
<Description>Amlodipine and valsartan tablet is a fixed combination of amlodipine and valsartan. Amlodipine and valsartan tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate's chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is. Its empirical formula is C20H25ClN2O5C6H6O3S and its molecular weight is 567.1. Valsartan is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to practically white fine powder, soluble in ethanol and methanol and slightly soluble in water. Valsartan’s chemical name is N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl]methyl]-L-valine; its structural formula is. Its empirical formula is C24H29N5O3 and its molecular weight is 435.5. Amlodipine and valsartan tablets are formulated in 4 strengths for oral administration with a combination of amlodipine besylate, equivalent to 5 mg or 10 mg of amlodipine free-base, with 160 mg, or 320 mg of valsartan providing for the following available combinations: 5/160 mg, 10/160 mg, 5/320 mg, and 10/320 mg. The inactive ingredients for all strengths of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, magnesium stearate and microcrystalline cellulose. The film coating contains hypromellose, polyethylene glycol, iron oxide yellow and titanium dioxide. Additionally, the 5/160 mg and 5/320 mg strengths contain iron oxide red.</Description>
</NDC>
<NDC>
<NDCCode>61786-764-02</NDCCode>
<PackageDescription>100 TABLET in 1 BLISTER PACK (61786-764-02)</PackageDescription>
<NDC11Code>61786-0764-02</NDC11Code>
<ProductNDC>61786-764</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160628</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-02-13</LastUpdate>
</NDC>
<NDC>
<NDCCode>63285-764-02</NDCCode>
<PackageDescription>100 BOTTLE, PLASTIC in 1 CASE (63285-764-02) > 100 CAPSULE in 1 BOTTLE, PLASTIC (63285-764-01)</PackageDescription>
<NDC11Code>63285-0764-02</NDC11Code>
<ProductNDC>63285-764</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<StartMarketingDate>19970912</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Patheon Inc.</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>63545-764-02</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (63545-764-02) </PackageDescription>
<NDC11Code>63545-0764-02</NDC11Code>
<ProductNDC>63545-764</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Aethusa Cynapium</ProprietaryName>
<NonProprietaryName>Aethusa Cynapium</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191218</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, Inc.</LabelerName>
<SubstanceName>AETHUSA CYNAPIUM</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191218</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63998-764-02</NDCCode>
<PackageDescription>750 mL in 1 BOTTLE (63998-764-02) </PackageDescription>
<NDC11Code>63998-0764-02</NDC11Code>
<ProductNDC>63998-764</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Alcohol-free Hand Sanitizing Foam</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>United Laboratories Inc.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For hand sanitizing to decrease bacteria on the skin. Recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>64679-764-02</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (64679-764-02) > 5 mL in 1 VIAL (64679-764-06) </PackageDescription>
<NDC11Code>64679-0764-02</NDC11Code>
<ProductNDC>64679-764</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Midazolam Hydrochloride</ProprietaryName>
<NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20081110</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078511</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Midazolam hydrochloride injection, USP is indicated: 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia;, 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants;, 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam hydrochloride can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia);, 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting.</IndicationAndUsage>
<Description>Midazolam hydrochloride injection, USP is a water-soluble benzodiazepine available as a sterile, nonpyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam USP compounded with 0.8% sodium chloride. The pH is approximately 3 (2.5 to 3.5) and is adjusted with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)-1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the chemical formula C18H13ClFN3HCl, a calculated molecular weight of 362.25 and the following structural formula. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
</NDC>
<NDC>
<NDCCode>68180-764-02</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (68180-764-02) </PackageDescription>
<NDC11Code>68180-0764-02</NDC11Code>
<ProductNDC>68180-764</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine And Valsartan</ProprietaryName>
<NonProprietaryName>Amlodipine And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090245</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; VALSARTAN</SubstanceName>
<StrengthNumber>5; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-10-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>81110-764-02</NDCCode>
<PackageDescription>1 BOTTLE, DROPPER in 1 CARTON (81110-764-02) / 30 mL in 1 BOTTLE, DROPPER (81110-764-01) </PackageDescription>
<NDC11Code>81110-0764-02</NDC11Code>
<ProductNDC>81110-764</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ilia Super Serum Skin Tint (st16 Pavones)</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200120</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Ilia, Inc.</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>132</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55648-006-02</NDCCode>
<PackageDescription>10 kg in 1 CONTAINER (55648-006-02)</PackageDescription>
<NDC11Code>55648-0006-02</NDC11Code>
<ProductNDC>55648-006</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Dextromethorphan Hydrobromide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19960418</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>WOCKHARDT LIMITED</LabelerName>
<SubstanceName>DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55648-059-02</NDCCode>
<PackageDescription>15 kg in 1 CONTAINER (55648-059-02)</PackageDescription>
<NDC11Code>55648-0059-02</NDC11Code>
<ProductNDC>55648-059</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Fexofenadine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20061030</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>FEXOFENADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55648-065-02</NDCCode>
<PackageDescription>5 kg in 1 CONTAINER (55648-065-02)</PackageDescription>
<NDC11Code>55648-0065-02</NDC11Code>
<ProductNDC>55648-065</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Paliperidone Micronized</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20140830</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55648-101-02</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (55648-101-02)</PackageDescription>
<NDC11Code>55648-0101-02</NDC11Code>
<ProductNDC>55648-101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>(sr)</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201331</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ammonium chloride, colloidal silicon dioxide, glyceryl behenate, hydroxy propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>55648-102-02</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (55648-102-02)</PackageDescription>
<NDC11Code>55648-0102-02</NDC11Code>
<ProductNDC>55648-102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>(xl)</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202189</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (XL) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD) and prevention of seasonal affective disorder (SAD). Periodically reevaluate long-term usefulness for the individual patient. (1).</IndicationAndUsage>
<Description>Bupropion hydrochloride, an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNO HCl. Bupropion hydrochloride powder is white, crystalline, and soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (XL) are supplied for oral administration as 150 mg white to off white extended-release tablets. Each tablet contains the abelled amount of bupropion hydrochloride and the inactive ingredients: ammonium chloride, colloidal silicon dioxide, ethyl cellulose, eudragit L30D55, glyceryl behenate, iron oxide black, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polyvinyl alcohol, povidone, propylene glycol, silicon dioxide, shellac glaze, talc, titanium dioxide, triethyl citrate. The tablets are printed with edible black ink. The insoluble shell of the extended-release tablet may remain intact during gastrointestinal transit and is eliminated in the feces. USP dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>55648-105-02</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (55648-105-02)</PackageDescription>
<NDC11Code>55648-0105-02</NDC11Code>
<ProductNDC>55648-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>(sr)</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201331</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ammonium chloride, colloidal silicon dioxide, glyceryl behenate, hydroxy propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>55648-107-02</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (55648-107-02)</PackageDescription>
<NDC11Code>55648-0107-02</NDC11Code>
<ProductNDC>55648-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>(sr)</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120830</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201331</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: ammonium chloride, colloidal silicon dioxide, glyceryl behenate, hydroxy propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>55648-153-02</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (55648-153-02)</PackageDescription>
<NDC11Code>55648-0153-02</NDC11Code>
<ProductNDC>55648-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090216</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA],Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC],Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Valacyclovir hydrochloride is a nucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients (1.1). ● Cold Sores (Herpes Labialis). ● Genital Herpes. ● Treatment in immunocompetent patients (initial or recurrent episode). ● Suppression in immunocompetent or HIV-infected patients. ● Reduction of transmission. ● Herpes Zoster. Pediatric Patients (1.2). ● Cold Sores (Herpes Labialis). ● Chickenpox. Limitations of Use (1.3). ● The efficacy and safety of valacyclovir hydrochloride tablets have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of L-valyl ester of the antiviral drug acyclovir. Valacyclovir hydrochloride tablets are for oral administration. Each tablet contains valacyclovir hydrochloride equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients croscarmellose sodium, FD&C Blue No. 2 aluminium lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6-dihydro-6-oxo-9H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula. Valacyclovir hydrochloride is a white to off-white powder with the molecular formula C13H20N6O4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pkas for valacyclovir hydrochloride are 1.90, 7.47, and 9.43.</Description>
</NDC>
<NDC>
<NDCCode>55648-154-02</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (55648-154-02)</PackageDescription>
<NDC11Code>55648-0154-02</NDC11Code>
<ProductNDC>55648-154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets are indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease. The effectiveness of ropinirole tablet was demonstrated in randomized, controlled trials in patients with early Parkinson's disease who were not receiving concomitant L-dopa therapy as well as in patients with advanced disease on concomitant L-dopa (see CLINICAL PHARMACOLOGY: Clinical Trials).</IndicationAndUsage>
<Description>Ropinirole hydrochloride is an orally administered non-ergoline dopamine agonist. It is the hydrochloride salt of 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one monohydrochloride and has an molecular formula of C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg meet, USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>55648-155-02</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (55648-155-02)</PackageDescription>
<NDC11Code>55648-0155-02</NDC11Code>
<ProductNDC>55648-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets are indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease. The effectiveness of ropinirole tablet was demonstrated in randomized, controlled trials in patients with early Parkinson's disease who were not receiving concomitant L-dopa therapy as well as in patients with advanced disease on concomitant L-dopa (see CLINICAL PHARMACOLOGY: Clinical Trials).</IndicationAndUsage>
<Description>Ropinirole hydrochloride is an orally administered non-ergoline dopamine agonist. It is the hydrochloride salt of 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one monohydrochloride and has an molecular formula of C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg meet, USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>55648-171-02</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (55648-171-02)</PackageDescription>
<NDC11Code>55648-0171-02</NDC11Code>
<ProductNDC>55648-171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets are indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease. The effectiveness of ropinirole tablet was demonstrated in randomized, controlled trials in patients with early Parkinson's disease who were not receiving concomitant L-dopa therapy as well as in patients with advanced disease on concomitant L-dopa (see CLINICAL PHARMACOLOGY: Clinical Trials).</IndicationAndUsage>
<Description>Ropinirole hydrochloride is an orally administered non-ergoline dopamine agonist. It is the hydrochloride salt of 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one monohydrochloride and has an molecular formula of C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg meet, USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>55648-172-02</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (55648-172-02)</PackageDescription>
<NDC11Code>55648-0172-02</NDC11Code>
<ProductNDC>55648-172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets are indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease. The effectiveness of ropinirole tablet was demonstrated in randomized, controlled trials in patients with early Parkinson's disease who were not receiving concomitant L-dopa therapy as well as in patients with advanced disease on concomitant L-dopa (see CLINICAL PHARMACOLOGY: Clinical Trials).</IndicationAndUsage>
<Description>Ropinirole hydrochloride is an orally administered non-ergoline dopamine agonist. It is the hydrochloride salt of 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one monohydrochloride and has an molecular formula of C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg meet, USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>55648-174-02</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (55648-174-02)</PackageDescription>
<NDC11Code>55648-0174-02</NDC11Code>
<ProductNDC>55648-174</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets are indicated for the treatment of the signs and symptoms of idiopathic Parkinson's disease. The effectiveness of ropinirole tablet was demonstrated in randomized, controlled trials in patients with early Parkinson's disease who were not receiving concomitant L-dopa therapy as well as in patients with advanced disease on concomitant L-dopa (see CLINICAL PHARMACOLOGY: Clinical Trials).</IndicationAndUsage>
<Description>Ropinirole hydrochloride is an orally administered non-ergoline dopamine agonist. It is the hydrochloride salt of 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one monohydrochloride and has an molecular formula of C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg meet, USP Dissolution Test 2.</Description>
</NDC>
</NDCList>