{
"NDC": [
{
"NDCCode": "57297-723-10",
"PackageDescription": "100 mL in 1 BOTTLE (57297-723-10)",
"NDC11Code": "57297-0723-10",
"ProductNDC": "57297-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefdinir",
"NonProprietaryName": "Cefdinir",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20070501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065259",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "CEFDINIR",
"StrengthNumber": "250",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir for oral suspension and other antibacterial drugs, cefdinir for oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefdinir for oral suspension is indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.",
"Description": "Cefdinir for oral suspension contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α,7β(Z)]]-7-[[(2-amino-4- thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C14H13N5O5S2 and the molecular weight is 395.42. Cefdinir has the structural formula shown below:. Cefdinir for oral suspension, after reconstitution, contains 125 mg cefdinir per 5 mL or 250 mg cefdinir per 5 mL and the following inactive ingredients: anhydrous citric acid; colloidal silicon dioxide; guar gum; anhydrous sodium citrate; sodium benzoate; strawberry flavour; sucrose; and xanthan gum."
},
{
"NDCCode": "57297-723-20",
"PackageDescription": "60 mL in 1 BOTTLE (57297-723-20)",
"NDC11Code": "57297-0723-20",
"ProductNDC": "57297-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefdinir",
"NonProprietaryName": "Cefdinir",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20070501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065259",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "CEFDINIR",
"StrengthNumber": "250",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir for oral suspension and other antibacterial drugs, cefdinir for oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefdinir for oral suspension is indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.",
"Description": "Cefdinir for oral suspension contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α,7β(Z)]]-7-[[(2-amino-4- thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C14H13N5O5S2 and the molecular weight is 395.42. Cefdinir has the structural formula shown below:. Cefdinir for oral suspension, after reconstitution, contains 125 mg cefdinir per 5 mL or 250 mg cefdinir per 5 mL and the following inactive ingredients: anhydrous citric acid; colloidal silicon dioxide; guar gum; anhydrous sodium citrate; sodium benzoate; strawberry flavour; sucrose; and xanthan gum."
},
{
"NDCCode": "13668-723-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (13668-723-10) ",
"NDC11Code": "13668-0723-10",
"ProductNDC": "13668-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rosuvastatin Calcium",
"NonProprietaryName": "Rosuvastatin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207626",
"LabelerName": "TORRENT PHARMACEUTICALS LIMITED",
"SubstanceName": "ROSUVASTATIN CALCIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241220",
"SamplePackage": "N",
"IndicationAndUsage": "Rosuvastatin tablets is indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults at increased risk for CV events., 2 As an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C): in adults with primary hypercholesterolemia.and slow the progression of atherosclerosis in adults.in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH).in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH)., 3 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia.Hypertriglyceridemia.",
"Description": "Rosuvastatin calcium USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is 6-Heptenoic acid, 7-[4-(4-fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl) amino]-5-pyrimidinyl]-3,5-dihydroxy-, calcium salt (2:1), (3R,5S,6E) with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a White or almost white, hygroscopic powder that is freely soluble in methylene chloride, slightly soluble in water practically insoluble in anhydrous ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets, USP for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: crospovidone USP, hypromellose USP, iron oxide red NF, lactose monohydrate USP, magnesium stearate USP, microcrystalline cellulose USP, sodium bicarbonate powder NF, titanium dioxide USP, triacetin USP."
},
{
"NDCCode": "16729-723-44",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (16729-723-44) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "16729-0723-44",
"ProductNDC": "16729-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clomiphene Citrate",
"NonProprietaryName": "Clomiphene Citrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20251121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219406",
"LabelerName": "Accord Healthcare Inc.",
"SubstanceName": "CLOMIPHENE CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20251121",
"SamplePackage": "N"
},
{
"NDCCode": "18860-723-10",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (18860-723-10) > 20 mL in 1 VIAL, GLASS",
"NDC11Code": "18860-0723-10",
"ProductNDC": "18860-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prialt",
"NonProprietaryName": "Ziconotide",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20041228",
"EndMarketingDate": "20220731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021060",
"LabelerName": "Jazz Pharmaceuticals, Inc.",
"SubstanceName": "ZICONOTIDE ACETATE",
"StrengthNumber": "25",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "N-Calcium Channel Receptor Antagonists [MoA], N-type Calcium Channel Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20041228",
"EndMarketingDatePackage": "20220731",
"SamplePackage": "N"
},
{
"NDCCode": "31722-723-31",
"PackageDescription": "10 TABLET, FILM COATED in 1 BLISTER PACK (31722-723-31) ",
"NDC11Code": "31722-0723-31",
"ProductNDC": "31722-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levofloxacin",
"NonProprietaryName": "Levofloxacin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202801",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LEVOFLOXACIN",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150109",
"SamplePackage": "N",
"IndicationAndUsage": "Levofloxacin is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated ( 1, 12.4). Pneumonia: Nosocomial ( 1.1) and Community Acquired ( 1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated ( 1.4) and Uncomplicated ( 1.5) Chronic bacterial prostatitis ( 1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients ( 1.7) Plague in adult and pediatric patients ( 1.8) Urinary Tract Infections (UTI): Complicated ( 1.9, 1.10) and Uncomplicated ( 1.12) Acute Pyelonephritis ( 1.11) Acute Bacterial Exacerbation of Chronic Bronchitis ( 1.13) Acute Bacterial Sinusitis ( 1.14) Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin and other antibacterial drugs, levofloxacin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria ( 1.15).",
"Description": "Levofloxacin tablets, USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido [1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin, USP. The molecular formula is C 18H 20FN 3O 4 1⁄2 H 2O and the molecular weight is 370.38. Levofloxacin, USP is a light yellowish-white to yellow-white crystals or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin, USP is considered soluble to freely solublein this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely solublein this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin, USP has the potential to form stable coordination compounds with many metal ions. This in vitrochelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Levofloxacin Tablets, USP are available as film-coated tablets and contain the following inactive ingredients: 250 mg: croscarmellose sodium, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone and titanium dioxide. 500 mg: croscarmellose sodium, hypromellose, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone and titanium dioxide. 750 mg: croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone and titanium dioxide. Levofloxacin tablets, USP meets USP Dissolution Test 2."
},
{
"NDCCode": "43744-723-10",
"PackageDescription": "1 g in 1 DRUM (43744-723-10)",
"NDC11Code": "43744-0723-10",
"ProductNDC": "43744-723",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Pergolide Mesylate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20120202",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "PERGOLIDE MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "43744-723-15",
"PackageDescription": "10 g in 1 DRUM (43744-723-15)",
"NDC11Code": "43744-0723-15",
"ProductNDC": "43744-723",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Pergolide Mesylate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20120202",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "PERGOLIDE MESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "49281-723-10",
"PackageDescription": "10 SYRINGE in 1 CARTON (49281-723-10) / .5 mL in 1 SYRINGE (49281-723-88) ",
"NDC11Code": "49281-0723-10",
"ProductNDC": "49281-723",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Flublok Quadrivalent Northern Hemisphere",
"NonProprietaryName": "Influenza A Virus A/west Virginia/30/2022 (h1n1) Recombinant Hemagglutinin Antigen, Influenza A Virus A/darwin/6/2021 (h3n2) Recombinant Hemagglutinin Antigen, Influenza B Virus B/austria/1359417/2021 Recombinant Hemagglutinin Antigen, And Influenza B Virus B/phuket/3073/2013 Recombinant Hemagglutinin Antigen",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20230630",
"EndMarketingDate": "20240630",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125285",
"LabelerName": "Sanofi Pasteur Inc.",
"SubstanceName": "INFLUENZA A VIRUS A/DARWIN/6/2021 (H3N2) RECOMBINANT HEMAGGLUTININ ANTIGEN; INFLUENZA A VIRUS A/WEST VIRGINIA/30/2022 (H1N1) RECOMBINANT HEMAGGLUTININ ANTIGEN; INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 RECOMBINANT HEMAGGLUTININ ANTIGEN; INFLUENZA B VIRUS B/PHUKET/3073/2013 RECOMBINANT HEMAGGLUTININ ANTIGEN",
"StrengthNumber": "45; 45; 45; 45",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL",
"Status": "Deprecated",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20230630",
"EndMarketingDatePackage": "20240630",
"SamplePackage": "N",
"IndicationAndUsage": "Flublok Quadrivalent is a vaccine indicated for active immunization against disease caused by influenza A subtype viruses and type B viruses contained in the vaccine. Flublok Quadrivalent is approved for use in persons 18 years of age and older [see Clinical Studies (14)].",
"Description": "Flublok Quadrivalent [Quadrivalent Influenza Vaccine] is a sterile, clear, colorless solution of recombinant hemagglutinin (HA) proteins from four influenza viruses for intramuscular injection. It contains purified HA proteins produced in a continuous insect cell line (expresSF+®) that is derived from Sf9 cells of the fall armyworm, Spodoptera frugiperda (which is related to moths, caterpillars and butterflies), and grown in serum-free medium composed of chemically-defined lipids, vitamins, amino acids, and mineral salts. Each of the four HAs is expressed in this cell line using a baculovirus vector (Autographa californica nuclear polyhedrosis virus), extracted from the cells with Triton X-100 and further purified by column chromatography. The purified HAs are then blended and filled into single-dose syringes. Flublok Quadrivalent is standardized according to United States Public Health Service (USPHS) requirements. For the 2023-2024 influenza season it is formulated to contain 180 mcg HA per 0.5 mL dose, with 45 mcg HA of each of the following 4 influenza virus strains: A/West Virginia/30/2022 (A/Wisconsin/67/2022 pdm09-like virus) (H1N1), A/Darwin/6/2021 (H3N2), B/Austria/1359417/2021 and B/Phuket/3073/2013. A single 0.5 mL dose of Flublok Quadrivalent contains sodium chloride (4.4 mg), monobasic sodium phosphate (0.2 mg), dibasic sodium phosphate (0.5 mg), and polysorbate 20 (Tween®20) (27.5 mcg). Each 0.5 mL dose of Flublok Quadrivalent may also contain residual amounts of baculovirus and Spodoptera frugiperda cell proteins (≤19 mcg), baculovirus and cellular DNA (≤10 ng), and Triton X-100 (≤100 mcg). Flublok Quadrivalent contains no egg proteins, antibiotics, or preservatives. The single-dose, prefilled syringes contain no natural rubber latex."
},
{
"NDCCode": "59779-723-10",
"PackageDescription": "295 mL in 1 BOTTLE, PLASTIC (59779-723-10)",
"NDC11Code": "59779-0723-10",
"ProductNDC": "59779-723",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Cvs Pharmacy",
"ProprietaryNameSuffix": "Fresh Water",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140225",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "CVS PHARMACY",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "HELPS ELIMINATE BACTERIA ON HANDS."
},
{
"NDCCode": "60592-723-10",
"PackageDescription": "1000 g in 1 BOTTLE (60592-723-10) ",
"NDC11Code": "60592-0723-10",
"ProductNDC": "60592-723",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Tramadol Hcl",
"DosageFormName": "POWDER",
"StartMarketingDate": "20200127",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Kalchem International inc",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"DEASchedule": "CIV",
"Status": "Unfinished",
"LastUpdate": "2026-10-09",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "27-JAN-20"
},
{
"NDCCode": "63187-723-10",
"PackageDescription": "10 TABLET in 1 BOTTLE (63187-723-10) ",
"NDC11Code": "63187-0723-10",
"ProductNDC": "63187-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078916",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161101",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine is indicated in:1. Short-term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks.2. Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year.3. Short-term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks.4. Short-term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short-term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). Famotidine is also indicated for the short-term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).5. Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).",
"Description": "The active ingredient in famotidine tablets, USP is a histamine H2-receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl] thio]propanimidamide. The empirical formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.43. Its structural formula is. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Each tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, yellow iron oxide and red iron oxide, Lecithin, macrogel/PEG 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, pregelatinized starch, talc and titanium dioxide."
},
{
"NDCCode": "63323-723-03",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (63323-723-03) / 3 mL in 1 VIAL, SINGLE-DOSE (63323-723-01) ",
"NDC11Code": "63323-0723-03",
"ProductNDC": "63323-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Remifentanil Hydrochloride",
"NonProprietaryName": "Remifentanil Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206223",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "REMIFENTANIL HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2024-10-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180119",
"SamplePackage": "N",
"IndicationAndUsage": "Remifentanil hydrochloride (HCl) for injection is indicated for intravenous (IV) administration: 1 As an analgesic agent for use during the induction and maintenance of general anesthesia for inpatient and outpatient procedures., 2 For continuation as an analgesic into the immediate postoperative period in adult patients under the direct supervision of an anesthesia practitioner in a postoperative anesthesia care unit or intensive care setting., 3 As an analgesic component of monitored anesthesia care in adult patients.",
"Description": "Remifentanil hydrochloride for injection is an opioid agonist. The chemical name is 3-[4-methoxycarbonyl-4-[(1-oxopropyl)phenylamino]-1-piperidine]propanoic acid methyl ester, hydrochloride salt. The molecular weight is 412.91. Its molecular formula is C20H28N2O5HCl, and it has the following chemical structure. Remifentanil hydrochloride for injection is a sterile, nonpyrogenic, preservative-free, white to off-white lyophilized powder for intravenous (IV) administration after reconstitution and dilution. Each vial contains 1 mg, 2 mg, or 5 mg of remifentanil base; 15 mg glycine; and hydrochloric acid to buffer the solutions to a nominal pH of 3 after reconstitution. When reconstituted as directed, solutions of remifentanil HCl are clear and colorless and contain remifentanil hydrochloride (HCl) equivalent to 1 mg/mL of remifentanil base. The pH of reconstituted solutions of remifentanil HCl ranges from 2.5 to 3.5. Remifentanil HCl has a pKa of 7.07. Remifentanil HCl has an n-octanol:water partition coefficient of 17.9 at pH 7.3."
},
{
"NDCCode": "63323-723-06",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (63323-723-06) / 3 mL in 1 VIAL, SINGLE-DOSE (63323-723-04) ",
"NDC11Code": "63323-0723-06",
"ProductNDC": "63323-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Remifentanil Hydrochloride",
"NonProprietaryName": "Remifentanil Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206223",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "REMIFENTANIL HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180119",
"SamplePackage": "N",
"IndicationAndUsage": "Remifentanil hydrochloride (HCl) for injection is indicated for intravenous (IV) administration: 1 As an analgesic agent for use during the induction and maintenance of general anesthesia for inpatient and outpatient procedures., 2 For continuation as an analgesic into the immediate postoperative period in adult patients under the direct supervision of an anesthesia practitioner in a postoperative anesthesia care unit or intensive care setting., 3 As an analgesic component of monitored anesthesia care in adult patients.",
"Description": "Remifentanil hydrochloride for injection is an opioid agonist. The chemical name is 3-[4-methoxycarbonyl-4-[(1-oxopropyl) phenylamino]-1-piperidine] propanoic acid methyl ester, hydrochloride salt. The molecular weight is 412.91. Its molecular formula is C20H28N2O5HCl, and it has the following chemical structure. Remifentanil hydrochloride for injection is a sterile, nonpyrogenic, preservative-free, white to off-white lyophilized powder for intravenous (IV) administration after reconstitution and dilution. Each vial contains 1 mg of remifentanil base; 15 mg glycine; and hydrochloric acid to buffer the solutions to a nominal pH of 3 after reconstitution. When reconstituted as directed, solutions of remifentanil HCl are clear and colorless and contain remifentanil hydrochloride (HCl) equivalent to 1 mg/mL of remifentanil base. The pH of reconstituted solutions of remifentanil HCl ranges from 2.5 to 3.5. Remifentanil HCl has a pKa of 7.07. Remifentanil HCl has an n-octanol:water partition coefficient of 17.9 at pH 7.3."
},
{
"NDCCode": "63868-723-20",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (63868-723-20) > 10 TABLET, COATED in 1 BLISTER PACK",
"NDC11Code": "63868-0723-20",
"ProductNDC": "63868-723",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mucus Relief Sinus Pressure And Pain",
"NonProprietaryName": "Acetaminophen, Guaifenesin, And Phenylephrine Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150610",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Chain Drug Marketing Association",
"SubstanceName": "ACETAMINOPHEN; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "325; 200; 5",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20150610",
"EndMarketingDatePackage": "20220731",
"SamplePackage": "N"
},
{
"NDCCode": "68118-723-10",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68118-723-10) / 20 mL in 1 VIAL, GLASS",
"NDC11Code": "68118-0723-10",
"ProductNDC": "68118-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prialt",
"NonProprietaryName": "Ziconotide Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20181015",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021060",
"LabelerName": "ESTEVE PHARMACEUTICALS, S.A.",
"SubstanceName": "ZICONOTIDE ACETATE",
"StrengthNumber": "500",
"StrengthUnit": "ug/20mL",
"Pharm_Classes": "N-Calcium Channel Receptor Antagonists [MoA], N-type Calcium Channel Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190815",
"SamplePackage": "N",
"IndicationAndUsage": "PRIALT (ziconotide) solution, intrathecal infusion is indicated for the management of severe chronic pain in adult patients for whom intrathecal therapy is warranted, and who are intolerant of or refractory to other treatment, such as systemic analgesics, adjunctive therapies, or intrathecal morphine.",
"Description": "PRIALT contains ziconotide, a synthetic equivalent of a naturally occurring conopeptide found in the piscivorous marine snail, Conus magus.Ziconotide is a 25 amino acid, polybasic peptide containing three disulfide bridges with a molecular weight of 2639 daltons and a molecular formula of C 102H 172N 36O 32S 7. The amino acid sequence and disulfide bridging pattern are given below:. Ziconotide is a hydrophilic molecule that is freely soluble in water and is practically insoluble in methyl t-butyl ether. PRIALT is formulated as a sterile, preservative-free, isotonic solution for intrathecal administration using an appropriate microinfusion device [ see Dosage and Administration ( 2) ]. Each 1 or 5 mL vial of PRIALT (100 mcg/mL) respectively contains 100 or 500 mcg of ziconotide acetate, and the 20 mL vial of PRIALT (25 mcg/mL) contains 500 mcg of ziconotide acetate, with L-methionine and sodium chloride as excipients at pH 4.0–5.0. Each vial is intended for single use only, either undiluted or after dilution to the appropriate concentration with 0.9% Sodium Chloride Injection, USP (preservative free)."
},
{
"NDCCode": "68180-723-10",
"PackageDescription": "100 mL in 1 BOTTLE (68180-723-10) ",
"NDC11Code": "68180-0723-10",
"ProductNDC": "68180-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefdinir",
"NonProprietaryName": "Cefdinir",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20070507",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065259",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "CEFDINIR",
"StrengthNumber": "250",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20070507",
"EndMarketingDatePackage": "20220131",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir for oral suspension and other antibacterial drugs, cefdinir for oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefdinir for oral suspension is indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.",
"Description": "Cefdinir for oral suspension contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α,7β(Z)]]-7-[[(2-amino-4-thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C14H13N5O5S2 and the molecular weight is 395.42. Cefdinir has the structural formula shown below:. Cefdinir for oral suspension, after reconstitution, contains 125 mg cefdinir per 5 mL or 250 mg cefdinir per 5 mL and the following inactive ingredients: anhydrous citric acid; colloidal silicon dioxide; guar gum; anhydrous sodium citrate; sodium benzoate; strawberry flavour; sucrose; and xanthan gum."
},
{
"NDCCode": "70720-723-10",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (70720-723-10) / 20 mL in 1 VIAL, GLASS",
"NDC11Code": "70720-0723-10",
"ProductNDC": "70720-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prialt",
"NonProprietaryName": "Ziconotide Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL",
"StartMarketingDate": "20181015",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021060",
"LabelerName": "TerSera Therapeutics LLC",
"SubstanceName": "ZICONOTIDE ACETATE",
"StrengthNumber": "25",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "N-Calcium Channel Receptor Antagonists [MoA], N-type Calcium Channel Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190815",
"SamplePackage": "N",
"IndicationAndUsage": "PRIALT (ziconotide) solution, intrathecal infusion is indicated for the management of severe chronic pain in adult patients for whom intrathecal therapy is warranted, and who are intolerant of or refractory to other treatment, such as systemic analgesics, adjunctive therapies, or intrathecal morphine.",
"Description": "PRIALT contains ziconotide, a synthetic equivalent of a naturally occurring conopeptide found in the piscivorous marine snail, Conus magus. Ziconotide is a 25 amino acid, polybasic peptide containing three disulfide bridges with a molecular weight of 2639 daltons and a molecular formula of C102H172N36O32S7. The amino acid sequence and disulfide bridging pattern are given below:. Ziconotide is a hydrophilic molecule that is freely soluble in water and is practically insoluble in methyl t-butyl ether. PRIALT is formulated as a sterile, preservative-free, isotonic solution for intrathecal administration using an appropriate microinfusion device [see Dosage and Administration (2)]. Each 1 or 5 mL vial of PRIALT (100 mcg/mL) respectively contains 100 or 500 mcg of ziconotide acetate, and the 20 mL vial of PRIALT (25 mcg/mL) contains 500 mcg of ziconotide acetate, with L-methionine and sodium chloride as excipients at pH 4.0–5.0. Each vial is intended for single use only, either undiluted or after dilution to the appropriate concentration with 0.9% Sodium Chloride Injection, USP (preservative free)."
},
{
"NDCCode": "70847-723-03",
"PackageDescription": "1 BAG in 1 CAN (70847-723-03) > 10 kg in 1 BAG",
"NDC11Code": "70847-0723-03",
"ProductNDC": "70847-723",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Benzylpenicillin Benzathine",
"DosageFormName": "POWDER",
"StartMarketingDate": "20160809",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "ADL Biopharma SL.",
"SubstanceName": "PENICILLIN G BENZATHINE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "09-AUG-16"
},
{
"NDCCode": "71919-723-10",
"PackageDescription": "100 mL in 1 BOTTLE, GLASS (71919-723-10) ",
"NDC11Code": "71919-0723-10",
"ProductNDC": "71919-723",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Yucca",
"NonProprietaryName": "Yucca Filamentosa",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20110517",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "YUCCA FILAMENTOSA",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20110517",
"SamplePackage": "N"
},
{
"NDCCode": "76420-723-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (76420-723-10) ",
"NDC11Code": "76420-0723-10",
"ProductNDC": "76420-723",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Escitalopram",
"NonProprietaryName": "Escitalopram Oxalate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090432",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "ESCITALOPRAM OXALATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240506",
"SamplePackage": "N",
"IndicationAndUsage": "Escitalopram tablets are indicated for the treatment of: 1 major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older., 2 generalized anxiety disorder (GAD) inadults.",
"Description": "Escitalopram tablets contain escitalopram, a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S-enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3(dimethyl-amino)propyl]-1-( p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula:. The molecular formula is C 20H 21FN 2O C 2H 2O 4and the molecular weight is 414.40. Escitalopram oxalate USP occurs as a white to almost white, crystalline powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate, and insoluble in heptane. Escitalopram tablets USP, for oral use, are film-coated, containing 6.38 mg, 12.77 mg, 25.54 mg escitalopram oxalate USP in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: butylated hydroxyl anisole, butylated hydroxy toluene, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, silicified microcrystalline cellulose, and talc. The film coating contains hypromellose, polyethylene glycol 400, and titanium dioxide."
},
{
"NDCCode": "81877-723-10",
"PackageDescription": "100 g in 1 TUBE (81877-723-10) ",
"NDC11Code": "81877-0723-10",
"ProductNDC": "81877-723",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Diclofenac Sodium 1% Gel",
"NonProprietaryName": "Diclofenac Sodium 1%",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210986",
"LabelerName": "Forreal Pharmaceuticals LLC",
"SubstanceName": "DICLOFENAC SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-06-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240415",
"SamplePackage": "N",
"IndicationAndUsage": "for the temporary relief of arthritis pain ONLY in the following areas:."
},
{
"NDCCode": "57297-029-03",
"PackageDescription": "1 BAG in 1 DRUM (57297-029-03) / 10 kg in 1 BAG",
"NDC11Code": "57297-0029-03",
"ProductNDC": "57297-029",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Rifaximin",
"DosageFormName": "POWDER",
"StartMarketingDate": "20100601",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "RIFAXIMIN",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2024-11-07",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "01-JUN-10"
},
{
"NDCCode": "57297-100-05",
"PackageDescription": "1 BAG in 1 DRUM (57297-100-05) / 10 kg in 1 BAG",
"NDC11Code": "57297-0100-05",
"ProductNDC": "57297-100",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Cefpodoxime Proxetil",
"DosageFormName": "POWDER",
"StartMarketingDate": "20200903",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "CEFPODOXIME PROXETIL",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "03-SEP-20"
},
{
"NDCCode": "57297-101-11",
"PackageDescription": "10 TABLET, FILM COATED in 1 BLISTER PACK (57297-101-11)",
"NDC11Code": "57297-0101-11",
"ProductNDC": "57297-101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078946",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "12.5; 320",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablet USP is the combination tablet of valsartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide (HCTZ), a diuretic. Valsartan and hydrochlorothiazide tablet USP is indicated for the treatment of hypertension, to lower blood pressure: : 1 In patients not adequately controlled with monotherapy (1) , 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1) .",
"Description": "Valsartan and hydrochlorothiazide tablet USP is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, titanium dioxide and additional colorants as below. 80 mg/12.5 mg: iron oxide red and iron oxide yellow. 160 mg/12.5 mg: iron oxide red. 160 mg/25 mg: iron oxide black, iron oxide red and iron oxide yellow. 320 mg/12.5 mg: iron oxide black and iron oxide red. 320 mg/25 mg: iron oxide yellow."
},
{
"NDCCode": "57297-102-11",
"PackageDescription": "10 TABLET, FILM COATED in 1 BLISTER PACK (57297-102-11)",
"NDC11Code": "57297-0102-11",
"ProductNDC": "57297-102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078946",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "25; 320",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablet USP is the combination tablet of valsartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide (HCTZ), a diuretic. Valsartan and hydrochlorothiazide tablet USP is indicated for the treatment of hypertension, to lower blood pressure: : 1 In patients not adequately controlled with monotherapy (1) , 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1) .",
"Description": "Valsartan and hydrochlorothiazide tablet USP is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, titanium dioxide and additional colorants as below. 80 mg/12.5 mg: iron oxide red and iron oxide yellow. 160 mg/12.5 mg: iron oxide red. 160 mg/25 mg: iron oxide black, iron oxide red and iron oxide yellow. 320 mg/12.5 mg: iron oxide black and iron oxide red. 320 mg/25 mg: iron oxide yellow."
},
{
"NDCCode": "57297-103-11",
"PackageDescription": "10 TABLET, FILM COATED in 1 BLISTER PACK (57297-103-11)",
"NDC11Code": "57297-0103-11",
"ProductNDC": "57297-103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078946",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "12.5; 80",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablet USP is the combination tablet of valsartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide (HCTZ), a diuretic. Valsartan and hydrochlorothiazide tablet USP is indicated for the treatment of hypertension, to lower blood pressure: : 1 In patients not adequately controlled with monotherapy (1) , 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1) .",
"Description": "Valsartan and hydrochlorothiazide tablet USP is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, titanium dioxide and additional colorants as below. 80 mg/12.5 mg: iron oxide red and iron oxide yellow. 160 mg/12.5 mg: iron oxide red. 160 mg/25 mg: iron oxide black, iron oxide red and iron oxide yellow. 320 mg/12.5 mg: iron oxide black and iron oxide red. 320 mg/25 mg: iron oxide yellow."
},
{
"NDCCode": "57297-104-11",
"PackageDescription": "10 TABLET, FILM COATED in 1 BLISTER PACK (57297-104-11)",
"NDC11Code": "57297-0104-11",
"ProductNDC": "57297-104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078946",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "12.5; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablet USP is the combination tablet of valsartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide (HCTZ), a diuretic. Valsartan and hydrochlorothiazide tablet USP is indicated for the treatment of hypertension, to lower blood pressure: : 1 In patients not adequately controlled with monotherapy (1) , 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1) .",
"Description": "Valsartan and hydrochlorothiazide tablet USP is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, titanium dioxide and additional colorants as below. 80 mg/12.5 mg: iron oxide red and iron oxide yellow. 160 mg/12.5 mg: iron oxide red. 160 mg/25 mg: iron oxide black, iron oxide red and iron oxide yellow. 320 mg/12.5 mg: iron oxide black and iron oxide red. 320 mg/25 mg: iron oxide yellow."
},
{
"NDCCode": "57297-105-11",
"PackageDescription": "10 TABLET, FILM COATED in 1 BLISTER PACK (57297-105-11)",
"NDC11Code": "57297-0105-11",
"ProductNDC": "57297-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130321",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078946",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "HYDROCHLOROTHIAZIDE; VALSARTAN",
"StrengthNumber": "25; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablet USP is the combination tablet of valsartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide (HCTZ), a diuretic. Valsartan and hydrochlorothiazide tablet USP is indicated for the treatment of hypertension, to lower blood pressure: : 1 In patients not adequately controlled with monotherapy (1) , 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1) .",
"Description": "Valsartan and hydrochlorothiazide tablet USP is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, titanium dioxide and additional colorants as below. 80 mg/12.5 mg: iron oxide red and iron oxide yellow. 160 mg/12.5 mg: iron oxide red. 160 mg/25 mg: iron oxide black, iron oxide red and iron oxide yellow. 320 mg/12.5 mg: iron oxide black and iron oxide red. 320 mg/25 mg: iron oxide yellow."
},
{
"NDCCode": "57297-140-03",
"PackageDescription": "1 BAG in 1 DRUM (57297-140-03) > 10 kg in 1 BAG",
"NDC11Code": "57297-0140-03",
"ProductNDC": "57297-140",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Pirfenidone",
"DosageFormName": "POWDER",
"StartMarketingDate": "20170130",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "PIRFENIDONE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "30-JAN-17"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>57297-723-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE (57297-723-10)</PackageDescription>
<NDC11Code>57297-0723-10</NDC11Code>
<ProductNDC>57297-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefdinir</ProprietaryName>
<NonProprietaryName>Cefdinir</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065259</ApplicationNumber>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>CEFDINIR</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir for oral suspension and other antibacterial drugs, cefdinir for oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefdinir for oral suspension is indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
<Description>Cefdinir for oral suspension contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α,7β(Z)]]-7-[[(2-amino-4- thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C14H13N5O5S2 and the molecular weight is 395.42. Cefdinir has the structural formula shown below:. Cefdinir for oral suspension, after reconstitution, contains 125 mg cefdinir per 5 mL or 250 mg cefdinir per 5 mL and the following inactive ingredients: anhydrous citric acid; colloidal silicon dioxide; guar gum; anhydrous sodium citrate; sodium benzoate; strawberry flavour; sucrose; and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>57297-723-20</NDCCode>
<PackageDescription>60 mL in 1 BOTTLE (57297-723-20)</PackageDescription>
<NDC11Code>57297-0723-20</NDC11Code>
<ProductNDC>57297-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefdinir</ProprietaryName>
<NonProprietaryName>Cefdinir</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065259</ApplicationNumber>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>CEFDINIR</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir for oral suspension and other antibacterial drugs, cefdinir for oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefdinir for oral suspension is indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
<Description>Cefdinir for oral suspension contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α,7β(Z)]]-7-[[(2-amino-4- thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C14H13N5O5S2 and the molecular weight is 395.42. Cefdinir has the structural formula shown below:. Cefdinir for oral suspension, after reconstitution, contains 125 mg cefdinir per 5 mL or 250 mg cefdinir per 5 mL and the following inactive ingredients: anhydrous citric acid; colloidal silicon dioxide; guar gum; anhydrous sodium citrate; sodium benzoate; strawberry flavour; sucrose; and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>13668-723-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (13668-723-10) </PackageDescription>
<NDC11Code>13668-0723-10</NDC11Code>
<ProductNDC>13668-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rosuvastatin Calcium</ProprietaryName>
<NonProprietaryName>Rosuvastatin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207626</ApplicationNumber>
<LabelerName>TORRENT PHARMACEUTICALS LIMITED</LabelerName>
<SubstanceName>ROSUVASTATIN CALCIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rosuvastatin tablets is indicated: 1 To reduce the risk of major adverse cardiovascular (CV) events (CV death, nonfatal myocardial infarction, nonfatal stroke, or an arterial revascularization procedure) in adults at increased risk for CV events., 2 As an adjunct to diet and exercise to reduce low-density lipoprotein cholesterol (LDL-C): in adults with primary hypercholesterolemia.and slow the progression of atherosclerosis in adults.in adults and pediatric patients aged 8 years and older with heterozygous familial hypercholesterolemia (HeFH).in adults and pediatric patients aged 7 years and older with homozygous familial hypercholesterolemia (HoFH)., 3 As an adjunct to diet for the treatment of adults with: Primary dysbetalipoproteinemia.Hypertriglyceridemia.</IndicationAndUsage>
<Description>Rosuvastatin calcium USP is a 3-hydroxy-3-methylglutaryl coenzyme A (HMG CoA)-reductase inhibitor. The chemical name for rosuvastatin calcium USP is 6-Heptenoic acid, 7-[4-(4-fluorophenyl)-6-(1-methylethyl)-2-[methyl(methylsulfonyl) amino]-5-pyrimidinyl]-3,5-dihydroxy-, calcium salt (2:1), (3R,5S,6E) with the following structural formula. The empirical formula for rosuvastatin calcium USP is (C 22H 27FN 3O 6S) 2Ca and the molecular weight is 1,001.14. Rosuvastatin calcium USP is a White or almost white, hygroscopic powder that is freely soluble in methylene chloride, slightly soluble in water practically insoluble in anhydrous ethanol. Rosuvastatin calcium is a hydrophilic compound with a partition coefficient (octanol/water) of 0.13 at pH of 7.0. Rosuvastatin tablets, USP for oral use contain rosuvastatin 5 mg, 10 mg, 20 mg, or 40 mg (equivalent to 5.2 mg, 10.4 mg, 20.8 mg, and 41.6 mg rosuvastatin calcium) and the following inactive ingredients: crospovidone USP, hypromellose USP, iron oxide red NF, lactose monohydrate USP, magnesium stearate USP, microcrystalline cellulose USP, sodium bicarbonate powder NF, titanium dioxide USP, triacetin USP.</Description>
</NDC>
<NDC>
<NDCCode>16729-723-44</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (16729-723-44) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>16729-0723-44</NDC11Code>
<ProductNDC>16729-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clomiphene Citrate</ProprietaryName>
<NonProprietaryName>Clomiphene Citrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219406</ApplicationNumber>
<LabelerName>Accord Healthcare Inc.</LabelerName>
<SubstanceName>CLOMIPHENE CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Estrogen Agonist/Antagonist [EPC], Selective Estrogen Receptor Modulators [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>18860-723-10</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (18860-723-10) > 20 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>18860-0723-10</NDC11Code>
<ProductNDC>18860-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prialt</ProprietaryName>
<NonProprietaryName>Ziconotide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20041228</StartMarketingDate>
<EndMarketingDate>20220731</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021060</ApplicationNumber>
<LabelerName>Jazz Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>ZICONOTIDE ACETATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>N-Calcium Channel Receptor Antagonists [MoA], N-type Calcium Channel Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20041228</StartMarketingDatePackage>
<EndMarketingDatePackage>20220731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>31722-723-31</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BLISTER PACK (31722-723-31) </PackageDescription>
<NDC11Code>31722-0723-31</NDC11Code>
<ProductNDC>31722-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levofloxacin</ProprietaryName>
<NonProprietaryName>Levofloxacin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202801</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LEVOFLOXACIN</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levofloxacin is a fluoroquinolone antibacterial indicated in adults (18 years of age and older) with infections caused by designated, susceptible bacteria and in pediatric patients where indicated ( 1, 12.4). Pneumonia: Nosocomial ( 1.1) and Community Acquired ( 1.2, 1.3) Skin and Skin Structure Infections (SSSI): Complicated ( 1.4) and Uncomplicated ( 1.5) Chronic bacterial prostatitis ( 1.6) Inhalational Anthrax, Post-Exposure in adult and pediatric patients ( 1.7) Plague in adult and pediatric patients ( 1.8) Urinary Tract Infections (UTI): Complicated ( 1.9, 1.10) and Uncomplicated ( 1.12) Acute Pyelonephritis ( 1.11) Acute Bacterial Exacerbation of Chronic Bronchitis ( 1.13) Acute Bacterial Sinusitis ( 1.14) Usage To reduce the development of drug-resistant bacteria and maintain the effectiveness of levofloxacin and other antibacterial drugs, levofloxacin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria ( 1.15).</IndicationAndUsage>
<Description>Levofloxacin tablets, USP are synthetic antibacterial agents for oral administration. Chemically, levofloxacin, a chiral fluorinated carboxyquinolone, is the pure (-)-(S)-enantiomer of the racemic drug substance ofloxacin. The chemical name is (-)-(S)-9-fluoro-2,3-dihydro-3-methyl-10-(4-methyl-1-piperazinyl)-7-oxo-7H-pyrido [1,2,3-de]-1,4-benzoxazine-6-carboxylic acid hemihydrate. Figure 1: The Chemical Structure of Levofloxacin, USP. The molecular formula is C 18H 20FN 3O 4 1⁄2 H 2O and the molecular weight is 370.38. Levofloxacin, USP is a light yellowish-white to yellow-white crystals or crystalline powder. The molecule exists as a zwitterion at the pH conditions in the small intestine. The data demonstrate that from pH 0.6 to 5.8, the solubility of levofloxacin, USP is essentially constant (approximately 100 mg/mL). Levofloxacin, USP is considered soluble to freely solublein this pH range, as defined by USP nomenclature. Above pH 5.8, the solubility increases rapidly to its maximum at pH 6.7 (272 mg/mL) and is considered freely solublein this range. Above pH 6.7, the solubility decreases and reaches a minimum value (about 50 mg/mL) at a pH of approximately 6.9. Levofloxacin, USP has the potential to form stable coordination compounds with many metal ions. This in vitrochelation potential has the following formation order: Al +3>Cu +2>Zn +2>Mg +2>Ca +2. Levofloxacin Tablets, USP are available as film-coated tablets and contain the following inactive ingredients: 250 mg: croscarmellose sodium, hypromellose, iron oxide red, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone and titanium dioxide. 500 mg: croscarmellose sodium, hypromellose, iron oxide red, iron oxide yellow, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone and titanium dioxide. 750 mg: croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone and titanium dioxide. Levofloxacin tablets, USP meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>43744-723-10</NDCCode>
<PackageDescription>1 g in 1 DRUM (43744-723-10)</PackageDescription>
<NDC11Code>43744-0723-10</NDC11Code>
<ProductNDC>43744-723</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Pergolide Mesylate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20120202</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>PERGOLIDE MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>43744-723-15</NDCCode>
<PackageDescription>10 g in 1 DRUM (43744-723-15)</PackageDescription>
<NDC11Code>43744-0723-15</NDC11Code>
<ProductNDC>43744-723</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Pergolide Mesylate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20120202</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>PERGOLIDE MESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>49281-723-10</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (49281-723-10) / .5 mL in 1 SYRINGE (49281-723-88) </PackageDescription>
<NDC11Code>49281-0723-10</NDC11Code>
<ProductNDC>49281-723</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Flublok Quadrivalent Northern Hemisphere</ProprietaryName>
<NonProprietaryName>Influenza A Virus A/west Virginia/30/2022 (h1n1) Recombinant Hemagglutinin Antigen, Influenza A Virus A/darwin/6/2021 (h3n2) Recombinant Hemagglutinin Antigen, Influenza B Virus B/austria/1359417/2021 Recombinant Hemagglutinin Antigen, And Influenza B Virus B/phuket/3073/2013 Recombinant Hemagglutinin Antigen</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<EndMarketingDate>20240630</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125285</ApplicationNumber>
<LabelerName>Sanofi Pasteur Inc.</LabelerName>
<SubstanceName>INFLUENZA A VIRUS A/DARWIN/6/2021 (H3N2) RECOMBINANT HEMAGGLUTININ ANTIGEN; INFLUENZA A VIRUS A/WEST VIRGINIA/30/2022 (H1N1) RECOMBINANT HEMAGGLUTININ ANTIGEN; INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 RECOMBINANT HEMAGGLUTININ ANTIGEN; INFLUENZA B VIRUS B/PHUKET/3073/2013 RECOMBINANT HEMAGGLUTININ ANTIGEN</SubstanceName>
<StrengthNumber>45; 45; 45; 45</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<EndMarketingDatePackage>20240630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Flublok Quadrivalent is a vaccine indicated for active immunization against disease caused by influenza A subtype viruses and type B viruses contained in the vaccine. Flublok Quadrivalent is approved for use in persons 18 years of age and older [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Flublok Quadrivalent [Quadrivalent Influenza Vaccine] is a sterile, clear, colorless solution of recombinant hemagglutinin (HA) proteins from four influenza viruses for intramuscular injection. It contains purified HA proteins produced in a continuous insect cell line (expresSF+®) that is derived from Sf9 cells of the fall armyworm, Spodoptera frugiperda (which is related to moths, caterpillars and butterflies), and grown in serum-free medium composed of chemically-defined lipids, vitamins, amino acids, and mineral salts. Each of the four HAs is expressed in this cell line using a baculovirus vector (Autographa californica nuclear polyhedrosis virus), extracted from the cells with Triton X-100 and further purified by column chromatography. The purified HAs are then blended and filled into single-dose syringes. Flublok Quadrivalent is standardized according to United States Public Health Service (USPHS) requirements. For the 2023-2024 influenza season it is formulated to contain 180 mcg HA per 0.5 mL dose, with 45 mcg HA of each of the following 4 influenza virus strains: A/West Virginia/30/2022 (A/Wisconsin/67/2022 pdm09-like virus) (H1N1), A/Darwin/6/2021 (H3N2), B/Austria/1359417/2021 and B/Phuket/3073/2013. A single 0.5 mL dose of Flublok Quadrivalent contains sodium chloride (4.4 mg), monobasic sodium phosphate (0.2 mg), dibasic sodium phosphate (0.5 mg), and polysorbate 20 (Tween®20) (27.5 mcg). Each 0.5 mL dose of Flublok Quadrivalent may also contain residual amounts of baculovirus and Spodoptera frugiperda cell proteins (≤19 mcg), baculovirus and cellular DNA (≤10 ng), and Triton X-100 (≤100 mcg). Flublok Quadrivalent contains no egg proteins, antibiotics, or preservatives. The single-dose, prefilled syringes contain no natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>59779-723-10</NDCCode>
<PackageDescription>295 mL in 1 BOTTLE, PLASTIC (59779-723-10)</PackageDescription>
<NDC11Code>59779-0723-10</NDC11Code>
<ProductNDC>59779-723</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Cvs Pharmacy</ProprietaryName>
<ProprietaryNameSuffix>Fresh Water</ProprietaryNameSuffix>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140225</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>CVS PHARMACY</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>HELPS ELIMINATE BACTERIA ON HANDS.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>60592-723-10</NDCCode>
<PackageDescription>1000 g in 1 BOTTLE (60592-723-10) </PackageDescription>
<NDC11Code>60592-0723-10</NDC11Code>
<ProductNDC>60592-723</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Tramadol Hcl</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20200127</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Kalchem International inc</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Unfinished</Status>
<LastUpdate>2026-10-09</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>27-JAN-20</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>63187-723-10</NDCCode>
<PackageDescription>10 TABLET in 1 BOTTLE (63187-723-10) </PackageDescription>
<NDC11Code>63187-0723-10</NDC11Code>
<ProductNDC>63187-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078916</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine is indicated in:1. Short-term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than eight weeks.2. Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year.3. Short-term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks.4. Short-term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short-term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). Famotidine is also indicated for the short-term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).5. Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies).</IndicationAndUsage>
<Description>The active ingredient in famotidine tablets, USP is a histamine H2-receptor antagonist. Famotidine is N'-(aminosulfonyl)-3-[[[2-[(diaminomethylene)amino]-4-thiazolyl]methyl] thio]propanimidamide. The empirical formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.43. Its structural formula is. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol.Each tablet for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, yellow iron oxide and red iron oxide, Lecithin, macrogel/PEG 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, pregelatinized starch, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63323-723-03</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (63323-723-03) / 3 mL in 1 VIAL, SINGLE-DOSE (63323-723-01) </PackageDescription>
<NDC11Code>63323-0723-03</NDC11Code>
<ProductNDC>63323-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Remifentanil Hydrochloride</ProprietaryName>
<NonProprietaryName>Remifentanil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206223</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>REMIFENTANIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-10-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Remifentanil hydrochloride (HCl) for injection is indicated for intravenous (IV) administration: 1 As an analgesic agent for use during the induction and maintenance of general anesthesia for inpatient and outpatient procedures., 2 For continuation as an analgesic into the immediate postoperative period in adult patients under the direct supervision of an anesthesia practitioner in a postoperative anesthesia care unit or intensive care setting., 3 As an analgesic component of monitored anesthesia care in adult patients.</IndicationAndUsage>
<Description>Remifentanil hydrochloride for injection is an opioid agonist. The chemical name is 3-[4-methoxycarbonyl-4-[(1-oxopropyl)phenylamino]-1-piperidine]propanoic acid methyl ester, hydrochloride salt. The molecular weight is 412.91. Its molecular formula is C20H28N2O5HCl, and it has the following chemical structure. Remifentanil hydrochloride for injection is a sterile, nonpyrogenic, preservative-free, white to off-white lyophilized powder for intravenous (IV) administration after reconstitution and dilution. Each vial contains 1 mg, 2 mg, or 5 mg of remifentanil base; 15 mg glycine; and hydrochloric acid to buffer the solutions to a nominal pH of 3 after reconstitution. When reconstituted as directed, solutions of remifentanil HCl are clear and colorless and contain remifentanil hydrochloride (HCl) equivalent to 1 mg/mL of remifentanil base. The pH of reconstituted solutions of remifentanil HCl ranges from 2.5 to 3.5. Remifentanil HCl has a pKa of 7.07. Remifentanil HCl has an n-octanol:water partition coefficient of 17.9 at pH 7.3.</Description>
</NDC>
<NDC>
<NDCCode>63323-723-06</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (63323-723-06) / 3 mL in 1 VIAL, SINGLE-DOSE (63323-723-04) </PackageDescription>
<NDC11Code>63323-0723-06</NDC11Code>
<ProductNDC>63323-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Remifentanil Hydrochloride</ProprietaryName>
<NonProprietaryName>Remifentanil Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206223</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>REMIFENTANIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Remifentanil hydrochloride (HCl) for injection is indicated for intravenous (IV) administration: 1 As an analgesic agent for use during the induction and maintenance of general anesthesia for inpatient and outpatient procedures., 2 For continuation as an analgesic into the immediate postoperative period in adult patients under the direct supervision of an anesthesia practitioner in a postoperative anesthesia care unit or intensive care setting., 3 As an analgesic component of monitored anesthesia care in adult patients.</IndicationAndUsage>
<Description>Remifentanil hydrochloride for injection is an opioid agonist. The chemical name is 3-[4-methoxycarbonyl-4-[(1-oxopropyl) phenylamino]-1-piperidine] propanoic acid methyl ester, hydrochloride salt. The molecular weight is 412.91. Its molecular formula is C20H28N2O5HCl, and it has the following chemical structure. Remifentanil hydrochloride for injection is a sterile, nonpyrogenic, preservative-free, white to off-white lyophilized powder for intravenous (IV) administration after reconstitution and dilution. Each vial contains 1 mg of remifentanil base; 15 mg glycine; and hydrochloric acid to buffer the solutions to a nominal pH of 3 after reconstitution. When reconstituted as directed, solutions of remifentanil HCl are clear and colorless and contain remifentanil hydrochloride (HCl) equivalent to 1 mg/mL of remifentanil base. The pH of reconstituted solutions of remifentanil HCl ranges from 2.5 to 3.5. Remifentanil HCl has a pKa of 7.07. Remifentanil HCl has an n-octanol:water partition coefficient of 17.9 at pH 7.3.</Description>
</NDC>
<NDC>
<NDCCode>63868-723-20</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (63868-723-20) > 10 TABLET, COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63868-0723-20</NDC11Code>
<ProductNDC>63868-723</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mucus Relief Sinus Pressure And Pain</ProprietaryName>
<NonProprietaryName>Acetaminophen, Guaifenesin, And Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150610</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Chain Drug Marketing Association</LabelerName>
<SubstanceName>ACETAMINOPHEN; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>325; 200; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha1-Agonists [MoA], alpha-1 Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150610</StartMarketingDatePackage>
<EndMarketingDatePackage>20220731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68118-723-10</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68118-723-10) / 20 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>68118-0723-10</NDC11Code>
<ProductNDC>68118-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prialt</ProprietaryName>
<NonProprietaryName>Ziconotide Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20181015</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021060</ApplicationNumber>
<LabelerName>ESTEVE PHARMACEUTICALS, S.A.</LabelerName>
<SubstanceName>ZICONOTIDE ACETATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>ug/20mL</StrengthUnit>
<Pharm_Classes>N-Calcium Channel Receptor Antagonists [MoA], N-type Calcium Channel Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PRIALT (ziconotide) solution, intrathecal infusion is indicated for the management of severe chronic pain in adult patients for whom intrathecal therapy is warranted, and who are intolerant of or refractory to other treatment, such as systemic analgesics, adjunctive therapies, or intrathecal morphine.</IndicationAndUsage>
<Description>PRIALT contains ziconotide, a synthetic equivalent of a naturally occurring conopeptide found in the piscivorous marine snail, Conus magus.Ziconotide is a 25 amino acid, polybasic peptide containing three disulfide bridges with a molecular weight of 2639 daltons and a molecular formula of C 102H 172N 36O 32S 7. The amino acid sequence and disulfide bridging pattern are given below:. Ziconotide is a hydrophilic molecule that is freely soluble in water and is practically insoluble in methyl t-butyl ether. PRIALT is formulated as a sterile, preservative-free, isotonic solution for intrathecal administration using an appropriate microinfusion device [ see Dosage and Administration ( 2) ]. Each 1 or 5 mL vial of PRIALT (100 mcg/mL) respectively contains 100 or 500 mcg of ziconotide acetate, and the 20 mL vial of PRIALT (25 mcg/mL) contains 500 mcg of ziconotide acetate, with L-methionine and sodium chloride as excipients at pH 4.0–5.0. Each vial is intended for single use only, either undiluted or after dilution to the appropriate concentration with 0.9% Sodium Chloride Injection, USP (preservative free).</Description>
</NDC>
<NDC>
<NDCCode>68180-723-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE (68180-723-10) </PackageDescription>
<NDC11Code>68180-0723-10</NDC11Code>
<ProductNDC>68180-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefdinir</ProprietaryName>
<NonProprietaryName>Cefdinir</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070507</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065259</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>CEFDINIR</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070507</StartMarketingDatePackage>
<EndMarketingDatePackage>20220131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of cefdinir for oral suspension and other antibacterial drugs, cefdinir for oral suspension should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Cefdinir for oral suspension is indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the conditions listed below.</IndicationAndUsage>
<Description>Cefdinir for oral suspension contain the active ingredient cefdinir, an extended-spectrum, semisynthetic cephalosporin, for oral administration. Chemically, cefdinir is [6R-[6α,7β(Z)]]-7-[[(2-amino-4-thiazolyl)(hydroxyimino)acetyl]amino]-3-ethenyl-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid. Cefdinir is a white to slightly brownish-yellow solid. It is slightly soluble in dilute hydrochloric acid and sparingly soluble in 0.1 M pH 7.0 phosphate buffer. The molecular formula is C14H13N5O5S2 and the molecular weight is 395.42. Cefdinir has the structural formula shown below:. Cefdinir for oral suspension, after reconstitution, contains 125 mg cefdinir per 5 mL or 250 mg cefdinir per 5 mL and the following inactive ingredients: anhydrous citric acid; colloidal silicon dioxide; guar gum; anhydrous sodium citrate; sodium benzoate; strawberry flavour; sucrose; and xanthan gum.</Description>
</NDC>
<NDC>
<NDCCode>70720-723-10</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (70720-723-10) / 20 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>70720-0723-10</NDC11Code>
<ProductNDC>70720-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prialt</ProprietaryName>
<NonProprietaryName>Ziconotide Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL</RouteName>
<StartMarketingDate>20181015</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021060</ApplicationNumber>
<LabelerName>TerSera Therapeutics LLC</LabelerName>
<SubstanceName>ZICONOTIDE ACETATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>N-Calcium Channel Receptor Antagonists [MoA], N-type Calcium Channel Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PRIALT (ziconotide) solution, intrathecal infusion is indicated for the management of severe chronic pain in adult patients for whom intrathecal therapy is warranted, and who are intolerant of or refractory to other treatment, such as systemic analgesics, adjunctive therapies, or intrathecal morphine.</IndicationAndUsage>
<Description>PRIALT contains ziconotide, a synthetic equivalent of a naturally occurring conopeptide found in the piscivorous marine snail, Conus magus. Ziconotide is a 25 amino acid, polybasic peptide containing three disulfide bridges with a molecular weight of 2639 daltons and a molecular formula of C102H172N36O32S7. The amino acid sequence and disulfide bridging pattern are given below:. Ziconotide is a hydrophilic molecule that is freely soluble in water and is practically insoluble in methyl t-butyl ether. PRIALT is formulated as a sterile, preservative-free, isotonic solution for intrathecal administration using an appropriate microinfusion device [see Dosage and Administration (2)]. Each 1 or 5 mL vial of PRIALT (100 mcg/mL) respectively contains 100 or 500 mcg of ziconotide acetate, and the 20 mL vial of PRIALT (25 mcg/mL) contains 500 mcg of ziconotide acetate, with L-methionine and sodium chloride as excipients at pH 4.0–5.0. Each vial is intended for single use only, either undiluted or after dilution to the appropriate concentration with 0.9% Sodium Chloride Injection, USP (preservative free).</Description>
</NDC>
<NDC>
<NDCCode>70847-723-03</NDCCode>
<PackageDescription>1 BAG in 1 CAN (70847-723-03) > 10 kg in 1 BAG</PackageDescription>
<NDC11Code>70847-0723-03</NDC11Code>
<ProductNDC>70847-723</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Benzylpenicillin Benzathine</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20160809</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>ADL Biopharma SL.</LabelerName>
<SubstanceName>PENICILLIN G BENZATHINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>09-AUG-16</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71919-723-10</NDCCode>
<PackageDescription>100 mL in 1 BOTTLE, GLASS (71919-723-10) </PackageDescription>
<NDC11Code>71919-0723-10</NDC11Code>
<ProductNDC>71919-723</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Yucca</ProprietaryName>
<NonProprietaryName>Yucca Filamentosa</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110517</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>YUCCA FILAMENTOSA</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110517</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>76420-723-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (76420-723-10) </PackageDescription>
<NDC11Code>76420-0723-10</NDC11Code>
<ProductNDC>76420-723</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Escitalopram</ProprietaryName>
<NonProprietaryName>Escitalopram Oxalate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090432</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>ESCITALOPRAM OXALATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Escitalopram tablets are indicated for the treatment of: 1 major depressive disorder (MDD) in adults and pediatric patients 12 years of age and older., 2 generalized anxiety disorder (GAD) inadults.</IndicationAndUsage>
<Description>Escitalopram tablets contain escitalopram, a selective serotonin reuptake inhibitor (SSRI), present as escitalopram oxalate salt. Escitalopram is the pure S-enantiomer (single isomer) of the racemic bicyclic phthalane derivative citalopram. Escitalopram oxalate is designated S-(+)-1-[3(dimethyl-amino)propyl]-1-( p-fluorophenyl)-5-phthalancarbonitrile oxalate with the following structural formula:. The molecular formula is C 20H 21FN 2O C 2H 2O 4and the molecular weight is 414.40. Escitalopram oxalate USP occurs as a white to almost white, crystalline powder and is freely soluble in methanol and dimethyl sulfoxide (DMSO), soluble in isotonic saline solution, sparingly soluble in water and ethanol, slightly soluble in ethyl acetate, and insoluble in heptane. Escitalopram tablets USP, for oral use, are film-coated, containing 6.38 mg, 12.77 mg, 25.54 mg escitalopram oxalate USP in strengths equivalent to 5 mg, 10 mg, and 20 mg, respectively, of escitalopram base. The 10 and 20 mg tablets are scored. The tablets also contain the following inactive ingredients: butylated hydroxyl anisole, butylated hydroxy toluene, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, microcrystalline cellulose, silicified microcrystalline cellulose, and talc. The film coating contains hypromellose, polyethylene glycol 400, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>81877-723-10</NDCCode>
<PackageDescription>100 g in 1 TUBE (81877-723-10) </PackageDescription>
<NDC11Code>81877-0723-10</NDC11Code>
<ProductNDC>81877-723</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium 1% Gel</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium 1%</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210986</ApplicationNumber>
<LabelerName>Forreal Pharmaceuticals LLC</LabelerName>
<SubstanceName>DICLOFENAC SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the temporary relief of arthritis pain ONLY in the following areas:.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>57297-029-03</NDCCode>
<PackageDescription>1 BAG in 1 DRUM (57297-029-03) / 10 kg in 1 BAG</PackageDescription>
<NDC11Code>57297-0029-03</NDC11Code>
<ProductNDC>57297-029</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Rifaximin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20100601</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>RIFAXIMIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2024-11-07</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-JUN-10</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>57297-100-05</NDCCode>
<PackageDescription>1 BAG in 1 DRUM (57297-100-05) / 10 kg in 1 BAG</PackageDescription>
<NDC11Code>57297-0100-05</NDC11Code>
<ProductNDC>57297-100</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Cefpodoxime Proxetil</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20200903</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>CEFPODOXIME PROXETIL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>03-SEP-20</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>57297-101-11</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BLISTER PACK (57297-101-11)</PackageDescription>
<NDC11Code>57297-0101-11</NDC11Code>
<ProductNDC>57297-101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078946</ApplicationNumber>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>12.5; 320</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablet USP is the combination tablet of valsartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide (HCTZ), a diuretic. Valsartan and hydrochlorothiazide tablet USP is indicated for the treatment of hypertension, to lower blood pressure: : 1 In patients not adequately controlled with monotherapy (1) , 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1) .</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablet USP is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, titanium dioxide and additional colorants as below. 80 mg/12.5 mg: iron oxide red and iron oxide yellow. 160 mg/12.5 mg: iron oxide red. 160 mg/25 mg: iron oxide black, iron oxide red and iron oxide yellow. 320 mg/12.5 mg: iron oxide black and iron oxide red. 320 mg/25 mg: iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>57297-102-11</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BLISTER PACK (57297-102-11)</PackageDescription>
<NDC11Code>57297-0102-11</NDC11Code>
<ProductNDC>57297-102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078946</ApplicationNumber>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>25; 320</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablet USP is the combination tablet of valsartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide (HCTZ), a diuretic. Valsartan and hydrochlorothiazide tablet USP is indicated for the treatment of hypertension, to lower blood pressure: : 1 In patients not adequately controlled with monotherapy (1) , 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1) .</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablet USP is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, titanium dioxide and additional colorants as below. 80 mg/12.5 mg: iron oxide red and iron oxide yellow. 160 mg/12.5 mg: iron oxide red. 160 mg/25 mg: iron oxide black, iron oxide red and iron oxide yellow. 320 mg/12.5 mg: iron oxide black and iron oxide red. 320 mg/25 mg: iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>57297-103-11</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BLISTER PACK (57297-103-11)</PackageDescription>
<NDC11Code>57297-0103-11</NDC11Code>
<ProductNDC>57297-103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078946</ApplicationNumber>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>12.5; 80</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablet USP is the combination tablet of valsartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide (HCTZ), a diuretic. Valsartan and hydrochlorothiazide tablet USP is indicated for the treatment of hypertension, to lower blood pressure: : 1 In patients not adequately controlled with monotherapy (1) , 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1) .</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablet USP is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, titanium dioxide and additional colorants as below. 80 mg/12.5 mg: iron oxide red and iron oxide yellow. 160 mg/12.5 mg: iron oxide red. 160 mg/25 mg: iron oxide black, iron oxide red and iron oxide yellow. 320 mg/12.5 mg: iron oxide black and iron oxide red. 320 mg/25 mg: iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>57297-104-11</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BLISTER PACK (57297-104-11)</PackageDescription>
<NDC11Code>57297-0104-11</NDC11Code>
<ProductNDC>57297-104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078946</ApplicationNumber>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>12.5; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablet USP is the combination tablet of valsartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide (HCTZ), a diuretic. Valsartan and hydrochlorothiazide tablet USP is indicated for the treatment of hypertension, to lower blood pressure: : 1 In patients not adequately controlled with monotherapy (1) , 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1) .</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablet USP is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, titanium dioxide and additional colorants as below. 80 mg/12.5 mg: iron oxide red and iron oxide yellow. 160 mg/12.5 mg: iron oxide red. 160 mg/25 mg: iron oxide black, iron oxide red and iron oxide yellow. 320 mg/12.5 mg: iron oxide black and iron oxide red. 320 mg/25 mg: iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>57297-105-11</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BLISTER PACK (57297-105-11)</PackageDescription>
<NDC11Code>57297-0105-11</NDC11Code>
<ProductNDC>57297-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130321</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078946</ApplicationNumber>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>HYDROCHLOROTHIAZIDE; VALSARTAN</SubstanceName>
<StrengthNumber>25; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablet USP is the combination tablet of valsartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide (HCTZ), a diuretic. Valsartan and hydrochlorothiazide tablet USP is indicated for the treatment of hypertension, to lower blood pressure: : 1 In patients not adequately controlled with monotherapy (1) , 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1) .</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablet USP is a combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl)[1,1'-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, 80 mg/12.5 mg, 160 mg/12.5 mg, 160 mg/25 mg, 320 mg/12.5 mg, and 320 mg/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, croscarmellose sodium, crospovidone, hypromellose, magnesium stearate, microcrystalline cellulose, pregelatinized starch, polyethylene glycol, titanium dioxide and additional colorants as below. 80 mg/12.5 mg: iron oxide red and iron oxide yellow. 160 mg/12.5 mg: iron oxide red. 160 mg/25 mg: iron oxide black, iron oxide red and iron oxide yellow. 320 mg/12.5 mg: iron oxide black and iron oxide red. 320 mg/25 mg: iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>57297-140-03</NDCCode>
<PackageDescription>1 BAG in 1 DRUM (57297-140-03) > 10 kg in 1 BAG</PackageDescription>
<NDC11Code>57297-0140-03</NDC11Code>
<ProductNDC>57297-140</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Pirfenidone</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20170130</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>PIRFENIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>30-JAN-17</StartMarketingDatePackage>
</NDC>
</NDCList>