RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>58118-0645-8</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BLISTER PACK (58118-0645-8) </PackageDescription>
    <NDC11Code>58118-0645-08</NDC11Code>
    <ProductNDC>58118-0645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluoxetine</ProprietaryName>
    <NonProprietaryName>Fluoxetine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20020129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076001</ApplicationNumber>
    <LabelerName>Clinical Solutions Wholesale, LLC</LabelerName>
    <SubstanceName>FLUOXETINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-01-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160623</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluoxetine capsules are indicated for the treatment of: : 1 Acute and maintenance treatment of Major Depressive Disorder [see Clinical Studies ( 14.1)] . , 2 Acute and maintenance treatment of obsessions and compulsions in patients with Obsessive Compulsive Disorder (OCD) [see Clinical Studies ( 14.2)]. , 3 Acute and maintenance treatment of binge-eating and vomiting behaviors in patients with moderate to severe Bulimia Nervosa [see Clinical Studies ( 14.3)] . , 4 Acute treatment of Panic Disorder, with or without agoraphobia       [see Clinical Studies (        14.4)].       .</IndicationAndUsage>
    <Description>Fluoxetine Capsules USP are a selective serotonin reuptake inhibitor for oral administration. They are also marketed for the treatment of premenstrual dysphoric disorder (Sarafem ®, fluoxetine hydrochloride). It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro- p-tolyl)oxy]propylamine hydrochloride and has the following structural formula:. C 17H 18F 3NOHCl M.W. 345.79. Fluoxetine hydrochloride, USP is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride, USP equivalent to 10 mg (32.3 µmol) or 20 mg (64.7 µmol) of fluoxetine. In addition, the capsules also contain the following inactive ingredients: D&amp;C yellow #10 aluminum lake, FD&amp;C blue #1 aluminum lake, gelatin, magnesium stearate, pregelatinized corn starch, propylene glycol, shellac, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-645-01</NDCCode>
    <PackageDescription>100 TABLET, COATED in 1 BOTTLE (42806-645-01) </PackageDescription>
    <NDC11Code>42806-0645-01</NDC11Code>
    <ProductNDC>42806-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <NonProprietaryName>Doxyclycline Hyclate</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201216</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214207</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-07-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxycycline hyclate tablets are tetracycline class drugs indicated for: 1 Rickettsial infections (1.1), 2 Sexually transmitted infections (1.2), 3 Respiratory tract infections (1.3), 4 Specific bacterial infections (1.4), 5 Ophthalmic infections (1.5), 6 Anthrax, including inhalational anthrax (post-exposure) (1.6), 7 Alternative treatment for selected infections when penicillin is contraindicated (1.7), 8 Adjunctive therapy for acute intestinal amebiasis and severe acne (1.8), 9 Prophylaxis of malaria (1.9).</IndicationAndUsage>
    <Description>Doxycycline Hyclate Tablets, USP contain doxycycline hyclate, USP a tetracycline class drug synthetically derived from oxytetracycline, in an immediate release formulation for oral administration. The molecular formula of doxycycline hyclate is (C22H24N2O8 · HCl)2 ·C2H6O·H2O and the molecular weight of doxycycline hyclate is 1025.87. The chemical name for doxycycline hyclate is: 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2 naphthacenecarboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. The structural formula for doxycycline hyclate is. Figure 1: Structure of Doxycycline Hyclate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline hyclate tablets, USP are available as 75 mg and 150 mg tablets. Each 75 mg tablet contains 86.6 mg of doxycycline hyclate equivalent to 75 mg of doxycycline. Each 150 mg tablet contains 173.2 mg of doxycycline hyclate equivalent to 150 mg of doxycycline. Inactive ingredients in the tablet formulation are: carnauba wax, croscarmellose sodium, FD&amp;C Blue #1 Aluminum Lake (75 mg Tablet), FD&amp;C Blue #2 Aluminum Lake (150 mg Tablet), FD&amp;C Yellow #6 Aluminum Lake (75 mg Tablet), iron oxide yellow (150 mg Tablet), macrogol/PEG, magnesium stearate, NF (vegetable grade), microcrystalline cellulose, polyvinyl alcohol-part hydrolyzed, purified water, sodium lauryl sulfate, talc, titanium dioxide. Doxycycline hyclate tablets USP, 75 mg contain 0.128 mg (0.0056 mEq) of sodium. Doxycycline hyclate tablets USP, 150 mg contain 0.256 mg (0.0111 mEq) of sodium.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-645-05</NDCCode>
    <PackageDescription>500 TABLET, COATED in 1 BOTTLE (42806-645-05) </PackageDescription>
    <NDC11Code>42806-0645-05</NDC11Code>
    <ProductNDC>42806-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <NonProprietaryName>Doxyclycline Hyclate</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201216</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214207</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-07-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxycycline hyclate tablets are tetracycline class drugs indicated for: 1 Rickettsial infections (1.1), 2 Sexually transmitted infections (1.2), 3 Respiratory tract infections (1.3), 4 Specific bacterial infections (1.4), 5 Ophthalmic infections (1.5), 6 Anthrax, including inhalational anthrax (post-exposure) (1.6), 7 Alternative treatment for selected infections when penicillin is contraindicated (1.7), 8 Adjunctive therapy for acute intestinal amebiasis and severe acne (1.8), 9 Prophylaxis of malaria (1.9).</IndicationAndUsage>
    <Description>Doxycycline Hyclate Tablets, USP contain doxycycline hyclate, USP a tetracycline class drug synthetically derived from oxytetracycline, in an immediate release formulation for oral administration. The molecular formula of doxycycline hyclate is (C22H24N2O8 · HCl)2 ·C2H6O·H2O and the molecular weight of doxycycline hyclate is 1025.87. The chemical name for doxycycline hyclate is: 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2 naphthacenecarboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. The structural formula for doxycycline hyclate is. Figure 1: Structure of Doxycycline Hyclate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline hyclate tablets, USP are available as 75 mg and 150 mg tablets. Each 75 mg tablet contains 86.6 mg of doxycycline hyclate equivalent to 75 mg of doxycycline. Each 150 mg tablet contains 173.2 mg of doxycycline hyclate equivalent to 150 mg of doxycycline. Inactive ingredients in the tablet formulation are: carnauba wax, croscarmellose sodium, FD&amp;C Blue #1 Aluminum Lake (75 mg Tablet), FD&amp;C Blue #2 Aluminum Lake (150 mg Tablet), FD&amp;C Yellow #6 Aluminum Lake (75 mg Tablet), iron oxide yellow (150 mg Tablet), macrogol/PEG, magnesium stearate, NF (vegetable grade), microcrystalline cellulose, polyvinyl alcohol-part hydrolyzed, purified water, sodium lauryl sulfate, talc, titanium dioxide. Doxycycline hyclate tablets USP, 75 mg contain 0.128 mg (0.0056 mEq) of sodium. Doxycycline hyclate tablets USP, 150 mg contain 0.256 mg (0.0111 mEq) of sodium.</Description>
  </NDC>
  <NDC>
    <NDCCode>42806-645-60</NDCCode>
    <PackageDescription>60 TABLET, COATED in 1 BOTTLE (42806-645-60) </PackageDescription>
    <NDC11Code>42806-0645-60</NDC11Code>
    <ProductNDC>42806-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <NonProprietaryName>Doxyclycline Hyclate</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201216</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214207</ApplicationNumber>
    <LabelerName>EPIC PHARMA, LLC</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-07-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201216</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxycycline hyclate tablets are tetracycline class drugs indicated for: 1 Rickettsial infections (1.1), 2 Sexually transmitted infections (1.2), 3 Respiratory tract infections (1.3), 4 Specific bacterial infections (1.4), 5 Ophthalmic infections (1.5), 6 Anthrax, including inhalational anthrax (post-exposure) (1.6), 7 Alternative treatment for selected infections when penicillin is contraindicated (1.7), 8 Adjunctive therapy for acute intestinal amebiasis and severe acne (1.8), 9 Prophylaxis of malaria (1.9).</IndicationAndUsage>
    <Description>Doxycycline Hyclate Tablets, USP contain doxycycline hyclate, USP a tetracycline class drug synthetically derived from oxytetracycline, in an immediate release formulation for oral administration. The molecular formula of doxycycline hyclate is (C22H24N2O8 · HCl)2 ·C2H6O·H2O and the molecular weight of doxycycline hyclate is 1025.87. The chemical name for doxycycline hyclate is: 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2 naphthacenecarboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. The structural formula for doxycycline hyclate is. Figure 1: Structure of Doxycycline Hyclate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline hyclate tablets, USP are available as 75 mg and 150 mg tablets. Each 75 mg tablet contains 86.6 mg of doxycycline hyclate equivalent to 75 mg of doxycycline. Each 150 mg tablet contains 173.2 mg of doxycycline hyclate equivalent to 150 mg of doxycycline. Inactive ingredients in the tablet formulation are: carnauba wax, croscarmellose sodium, FD&amp;C Blue #1 Aluminum Lake (75 mg Tablet), FD&amp;C Blue #2 Aluminum Lake (150 mg Tablet), FD&amp;C Yellow #6 Aluminum Lake (75 mg Tablet), iron oxide yellow (150 mg Tablet), macrogol/PEG, magnesium stearate, NF (vegetable grade), microcrystalline cellulose, polyvinyl alcohol-part hydrolyzed, purified water, sodium lauryl sulfate, talc, titanium dioxide. Doxycycline hyclate tablets USP, 75 mg contain 0.128 mg (0.0056 mEq) of sodium. Doxycycline hyclate tablets USP, 150 mg contain 0.256 mg (0.0111 mEq) of sodium.</Description>
  </NDC>
  <NDC>
    <NDCCode>47783-645-01</NDCCode>
    <PackageDescription>1 SYRINGE, GLASS in 1 CARTON (47783-645-01)  / 1 mL in 1 SYRINGE, GLASS</PackageDescription>
    <NDC11Code>47783-0645-01</NDC11Code>
    <ProductNDC>47783-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Takhzyro</ProprietaryName>
    <NonProprietaryName>Lanadelumab-flyo</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230203</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761090</ApplicationNumber>
    <LabelerName>Takeda Pharmaceuticals America, Inc.</LabelerName>
    <SubstanceName>LANADELUMAB</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Kallikrein Inhibitors [MoA], Plasma Kallikrein Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230203</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TAKHZYRO® is indicated for prophylaxis to prevent attacks of hereditary angioedema (HAE) in adult and pediatric patients aged 2 years and older.</IndicationAndUsage>
    <Description>Lanadelumab-flyo, a plasma kallikrein inhibitor, is a non-plasma derived, recombinant, fully human, monoclonal antibody (IgG1/κ-light chain) produced in Chinese Hamster Ovary (CHO) cells. Based on the amino acid sequence, the molecular weight of the non-glycosylated lanadelumab-flyo is 146 kDa. The calculated molecular mass of the fully reduced light chain is 23 kDa. The calculated molecular mass of the fully reduced and non-glycosylated heavy chain is 49 kDa. TAKHZYRO (lanadelumab-flyo) injection is a sterile, preservative-free, clear to slightly opalescent, colorless to slightly yellow solution for subcutaneous use. Each mL of ready-to-use TAKHZYRO solution contains 150 mg of lanadelumab-flyo, citric acid monohydrate (4.1 mg), L-histidine (7.8 mg), polysorbate 80 (0.1 mg), sodium chloride (5.3 mg), sodium phosphate dibasic dihydrate (5.3 mg), and Water for Injection, USP. The solution has a pH of approximately 6.0.</Description>
  </NDC>
  <NDC>
    <NDCCode>50268-645-15</NDCCode>
    <PackageDescription>50 BLISTER PACK in 1 BOX (50268-645-15)  / 1 TABLET in 1 BLISTER PACK (50268-645-11) </PackageDescription>
    <NDC11Code>50268-0645-15</NDC11Code>
    <ProductNDC>50268-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxycodone And Acetaminophen</ProprietaryName>
    <NonProprietaryName>Oxycodone And Acetaminophen</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180709</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040778</ApplicationNumber>
    <LabelerName>AvPAK</LabelerName>
    <SubstanceName>OXYCODONE HYDROCHLORIDE; ACETAMINOPHEN</SubstanceName>
    <StrengthNumber>7.5; 325</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-01-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180709</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxycodone and Acetaminophen Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse, with opioids, even at recommended doses [see WARNINGS], reserve Oxycodone and Acetaminophen Tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics].  Have not been tolerated, or are not expected to be tolerated.  Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Oxycodone and Acetaminophen is available in tablets for oral administration. Each tablet for oral administration contains. Oxycodone Hydrochloride USP……………. 5 mg*. (*5 mg Oxycodone Hydrochloride, USP is equivalent to 4.4815 mg Oxycodone). Acetaminophen USP………………………325 mg. Oxycodone Hydrochloride USP……………. 7.5 mg* (*7.5 mg Oxycodone Hydrochloride, USP is equivalent to 6.7228 mg Oxycodone). Acetaminophen USP………………………325 mg. Oxycodone Hydrochloride USP……………. 10 mg* (*10 mg Oxycodone Hydrochloride, USP is equivalent to 8.9637 mg Oxycodone) Acetaminophen USP………………………325 mg. Inactive Ingredients. The tablets contain colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch and stearic acid. Oxycodone and Acetaminophen Tablets, USP contain oxycodone, 14-hydroxydihydrocodeinone, a semisynthetic opioid analgesic which occurs as a white, odorless, crystalline powder having a saline, bitter taste. The molecular formula for oxycodone hydrochloride is C 18H 21NO 4HCl and the molecular weight 351.82. It is derived from the opium alkaloid, thebaine, and may be represented by the following structural formula:. Oxycodone and Acetaminophen Tablets, USP contain acetaminophen, USP, 4’-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. The molecular formula for acetaminophen is C 8H 9NO 2 and the molecular weight is 151.17. It may be represented by the following structural formula:.</Description>
  </NDC>
  <NDC>
    <NDCCode>50458-645-65</NDCCode>
    <PackageDescription>60 CAPSULE, COATED PELLETS in 1 BOTTLE (50458-645-65) </PackageDescription>
    <NDC11Code>50458-0645-65</NDC11Code>
    <ProductNDC>50458-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Topamax</ProprietaryName>
    <NonProprietaryName>Topiramate</NonProprietaryName>
    <DosageFormName>CAPSULE, COATED PELLETS</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19981101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020844</ApplicationNumber>
    <LabelerName>Janssen Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>TOPIRAMATE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19981101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>TOPAMAX is indicated for: 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older (1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older (1.2), 2 Preventive treatment of migraine in patients 12 years of age and older (1.3).</IndicationAndUsage>
    <Description>Topiramate is a sulfamate-substituted monosaccharide. TOPAMAX® (topiramate) Tablets are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. TOPAMAX (topiramate capsules) Sprinkle Capsules are available as 15 mg and 25 mg sprinkle capsules for oral administration as whole capsules or opened and sprinkled onto soft food. Topiramate is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. TOPAMAX Tablets contain the following inactive ingredients: carnauba wax, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, purified water, sodium starch glycolate, synthetic iron oxide, and titanium dioxide. TOPAMAX Sprinkle Capsules contain topiramate-coated beads in a hard gelatin capsule. The inactive ingredients are black pharmaceutical ink, cellulose acetate, gelatin, povidone, sodium lauryl sulfate, sorbitan monolaurate, sugar spheres (sucrose and starch) and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>50742-645-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (50742-645-01) </PackageDescription>
    <NDC11Code>50742-0645-01</NDC11Code>
    <ProductNDC>50742-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Triazolam</ProprietaryName>
    <NonProprietaryName>Triazolam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201020</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214219</ApplicationNumber>
    <LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>TRIAZOLAM</SubstanceName>
    <StrengthNumber>.125</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2023-06-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201020</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Triazolam is indicated for the short-term treatment of insomnia (generally 7 to 10 days) in adults.</IndicationAndUsage>
    <Description>Triazolam Tablets, USP contains triazolam, a triazolobenzodiazepine. Triazolam, USP is a white crystalline powder, soluble in alcohol and poorly soluble in water. It has a molecular weight of 343.21. The chemical name for triazolam is 8-chloro-6-(o-chlorophenyl)-1-methyl-4H-s-triazolo-[4,3-α] [1,4] benzodiazepine. The structural formula is represented below.</Description>
  </NDC>
  <NDC>
    <NDCCode>57520-0645-1</NDCCode>
    <PackageDescription>30 mL in 1 BOTTLE, DROPPER (57520-0645-1)</PackageDescription>
    <NDC11Code>57520-0645-01</NDC11Code>
    <ProductNDC>57520-0645</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Platinum For Men</ProprietaryName>
    <NonProprietaryName>Cyanocobalamin, Glandula Suprarenalis Suis, Kali Carbonicum, L-carnitine, L-glutamine, L-ornithine, L-tryptophan, L-tyrosine, Orchitinum.</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110303</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
    <LabelerName>Apotheca Company</LabelerName>
    <SubstanceName>CYANOCOBALAMIN; SUS SCROFA ADRENAL GLAND; POTASSIUM CARBONATE; CARNITINE; GLUTAMINE; ORNITHINE; TRYPTOPHAN; TYROSINE; SUS SCROFA TESTICLE; SUS SCROFA THYROID; LYCOPODIUM CLAVATUM SPORE; HUMAN CHORIONIC GONADOTROPIN</SubstanceName>
    <StrengthNumber>6; 6; 6; 6; 6; 6; 6; 6; 6; 8; 10; 60</StrengthNumber>
    <StrengthUnit>[hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL; [hp_X]/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>INDICATIONS:  Provides homeopathic support for managing weight with proper diet and exercise.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>60760-645-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (60760-645-30) </PackageDescription>
    <NDC11Code>60760-0645-30</NDC11Code>
    <ProductNDC>60760-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Losartan Potassium</ProprietaryName>
    <NonProprietaryName>Losartan Potassium</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220728</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091497</ApplicationNumber>
    <LabelerName>ST. MARY'S MEDICAL PARK PHARMACY</LabelerName>
    <SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-05-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Losartan potassium is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. ( 1.2) , 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (  1.3)  .</IndicationAndUsage>
    <Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT 1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C 22H 22ClKN 6O, and its structural formula is:. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium, USP, and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, and titanium dioxide. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg, contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively. Losartan potassium tablets USP, 25 mg and 50 mg meet USP Dissolution Test 1 and Losartan potassium tablets USP, 100 mg meet USP Dissolution Test 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>60760-645-90</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (60760-645-90) </PackageDescription>
    <NDC11Code>60760-0645-90</NDC11Code>
    <ProductNDC>60760-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Losartan Potassium</ProprietaryName>
    <NonProprietaryName>Losartan Potassium</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220728</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091497</ApplicationNumber>
    <LabelerName>ST. MARY'S MEDICAL PARK PHARMACY</LabelerName>
    <SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-05-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220811</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Losartan potassium is an angiotensin II receptor blocker (ARB) indicated for: 1 Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. ( 1.1) , 2 Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. ( 1.2) , 3 Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (  1.3)  .</IndicationAndUsage>
    <Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT 1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[ p-( o-1 H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C 22H 22ClKN 6O, and its structural formula is:. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium is available as tablets for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium, USP, and the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, and titanium dioxide. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg, contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively. Losartan potassium tablets USP, 25 mg and 50 mg meet USP Dissolution Test 1 and Losartan potassium tablets USP, 100 mg meet USP Dissolution Test 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-645-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (63187-645-30) </PackageDescription>
    <NDC11Code>63187-0645-30</NDC11Code>
    <ProductNDC>63187-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2  HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-645-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (63187-645-60) </PackageDescription>
    <NDC11Code>63187-0645-60</NDC11Code>
    <ProductNDC>63187-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2  HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-645-72</NDCCode>
    <PackageDescription>120 TABLET in 1 BOTTLE, PLASTIC (63187-645-72) </PackageDescription>
    <NDC11Code>63187-0645-72</NDC11Code>
    <ProductNDC>63187-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2  HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-645-78</NDCCode>
    <PackageDescription>180 TABLET in 1 BOTTLE, PLASTIC (63187-645-78) </PackageDescription>
    <NDC11Code>63187-0645-78</NDC11Code>
    <ProductNDC>63187-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2  HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-645-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (63187-645-90) </PackageDescription>
    <NDC11Code>63187-0645-90</NDC11Code>
    <ProductNDC>63187-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Buspirone Hcl</ProprietaryName>
    <NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20010328</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074253</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2025-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, lll1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge”, irritability, impatience.</IndicationAndUsage>
    <Description>Buspirone hydrochloride is an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1-piperazinyl]-butyl]-8-azaspiro[4.5]decane-7,9- dione monohydrochloride. The empirical formula C21H31N5O2  HCl is represented by the following structural formula. Each tablet for oral administration containing 5 mg, 10 mg, or 15 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 9.1 mg, and 13.7 mg of buspirone free base respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablet is provided in a special tablet design. This tablet is scored so it can be either bisected or trisected. Thus, a single 15 mg tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two thirds of a tablet), 7.5 mg (one half of a tablet), or 5 mg (one third of a tablet). In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-645-03</NDCCode>
    <PackageDescription>30 POUCH in 1 CARTON (64980-645-03)  / 5 VIAL, SINGLE-USE in 1 POUCH / 3 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>64980-0645-03</NDC11Code>
    <ProductNDC>64980-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
    <NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20250314</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076749</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>.5; 3</StrengthNumber>
    <StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250314</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.</IndicationAndUsage>
    <Description>The active components in Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, USP are albuterol sulfate, USP and ipratropium bromide, USP. Albuterol sulfate is a salt of racemic albuterol and a relatively selective β 2-adrenergic bronchodilator chemically described as α 1-[( tert-Butylamino) methyl]-4-hydroxy- m-xylene- α,α′-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the empirical formula is (C 13H 21NO 3) 2  H 2SO 4. It is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization’s recommended name for albuterol base is salbutamol. chemical structure of albuterol sulfate. chemical structure of ipratropium bromide. Ipratropium bromide, USP is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo[3.2.1]-octane,3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8-methyl-8-(1-methylethyl)-, bromide, monohydrate (endo,syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the empirical formula is C 20H 30BrNO 3  H 2O. It is a white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Each 3 mL vial of Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, USP contains 3 mg (0.1%) of albuterol sulfate, USP (equivalent to 2.5 mg (0.083%) of albuterol base) and 0.5 mg (0.017%) of ipratropium bromide, USP in an isotonic, sterile, aqueous solution containing sodium chloride and hydrochloric acid to adjust to pH 4. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, USP is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, USP like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, USP should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION).</Description>
  </NDC>
  <NDC>
    <NDCCode>64980-645-06</NDCCode>
    <PackageDescription>60 POUCH in 1 CARTON (64980-645-06)  / 5 VIAL, SINGLE-USE in 1 POUCH / 3 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>64980-0645-06</NDC11Code>
    <ProductNDC>64980-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
    <NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20250314</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076749</ApplicationNumber>
    <LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
    <SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>.5; 3</StrengthNumber>
    <StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250314</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.</IndicationAndUsage>
    <Description>The active components in Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, USP are albuterol sulfate, USP and ipratropium bromide, USP. Albuterol sulfate is a salt of racemic albuterol and a relatively selective β 2-adrenergic bronchodilator chemically described as α 1-[( tert-Butylamino) methyl]-4-hydroxy- m-xylene- α,α′-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the empirical formula is (C 13H 21NO 3) 2  H 2SO 4. It is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization’s recommended name for albuterol base is salbutamol. chemical structure of albuterol sulfate. chemical structure of ipratropium bromide. Ipratropium bromide, USP is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo[3.2.1]-octane,3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8-methyl-8-(1-methylethyl)-, bromide, monohydrate (endo,syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the empirical formula is C 20H 30BrNO 3  H 2O. It is a white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Each 3 mL vial of Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, USP contains 3 mg (0.1%) of albuterol sulfate, USP (equivalent to 2.5 mg (0.083%) of albuterol base) and 0.5 mg (0.017%) of ipratropium bromide, USP in an isotonic, sterile, aqueous solution containing sodium chloride and hydrochloric acid to adjust to pH 4. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, USP is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, USP like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, USP should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION).</Description>
  </NDC>
  <NDC>
    <NDCCode>65162-645-03</NDCCode>
    <PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (65162-645-03) </PackageDescription>
    <NDC11Code>65162-0645-03</NDC11Code>
    <ProductNDC>65162-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
    <NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190410</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209647</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
    <SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Esomeprazole is a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
    <Description>The active ingredient in esomeprazole magnesium delayed-release capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R-isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2 Mg x 3H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium is supplied in delayed-release capsules. Each esomeprazole magnesium delayed-release capsule, USP contains 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate, USP) or 40 mg of esomeprazole (equivalent to 44.5 mg esomeprazole magnesium trihydrate, USP) in the form of enteric-coated granules with the following inactive ingredients: corn starch, gelatin, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion type C, mono- and di-glycerides, polysorbate 80, sodium lauryl sulfate, sucrose, talc, triethyl citrate and titanium dioxide. Each capsule shell is imprinted with blue pharmaceutical ink which contains: butyl alcohol, dehydrated alcohol, FD &amp; C Blue # 2 aluminum lake, isopropyl alcohol, propylene glycol, shellac and strong ammonia solution. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>65162-645-09</NDCCode>
    <PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (65162-645-09) </PackageDescription>
    <NDC11Code>65162-0645-09</NDC11Code>
    <ProductNDC>65162-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
    <NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190410</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209647</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
    <SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Esomeprazole is a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
    <Description>The active ingredient in esomeprazole magnesium delayed-release capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R-isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2 Mg x 3H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium is supplied in delayed-release capsules. Each esomeprazole magnesium delayed-release capsule, USP contains 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate, USP) or 40 mg of esomeprazole (equivalent to 44.5 mg esomeprazole magnesium trihydrate, USP) in the form of enteric-coated granules with the following inactive ingredients: corn starch, gelatin, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion type C, mono- and di-glycerides, polysorbate 80, sodium lauryl sulfate, sucrose, talc, triethyl citrate and titanium dioxide. Each capsule shell is imprinted with blue pharmaceutical ink which contains: butyl alcohol, dehydrated alcohol, FD &amp; C Blue # 2 aluminum lake, isopropyl alcohol, propylene glycol, shellac and strong ammonia solution. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>65162-645-11</NDCCode>
    <PackageDescription>1000 CAPSULE, DELAYED RELEASE in 1 BOTTLE (65162-645-11) </PackageDescription>
    <NDC11Code>65162-0645-11</NDC11Code>
    <ProductNDC>65162-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
    <NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190410</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209647</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
    <SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Esomeprazole is a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
    <Description>The active ingredient in esomeprazole magnesium delayed-release capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R-isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2 Mg x 3H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium is supplied in delayed-release capsules. Each esomeprazole magnesium delayed-release capsule, USP contains 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate, USP) or 40 mg of esomeprazole (equivalent to 44.5 mg esomeprazole magnesium trihydrate, USP) in the form of enteric-coated granules with the following inactive ingredients: corn starch, gelatin, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion type C, mono- and di-glycerides, polysorbate 80, sodium lauryl sulfate, sucrose, talc, triethyl citrate and titanium dioxide. Each capsule shell is imprinted with blue pharmaceutical ink which contains: butyl alcohol, dehydrated alcohol, FD &amp; C Blue # 2 aluminum lake, isopropyl alcohol, propylene glycol, shellac and strong ammonia solution. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>65162-645-50</NDCCode>
    <PackageDescription>500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (65162-645-50) </PackageDescription>
    <NDC11Code>65162-0645-50</NDC11Code>
    <ProductNDC>65162-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Esomeprazole Magnesium</ProprietaryName>
    <NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
    <DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190410</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209647</ApplicationNumber>
    <LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
    <SubstanceName>ESOMEPRAZOLE MAGNESIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Esomeprazole is a proton pump inhibitor (PPI). Esomeprazole magnesium delayed-release capsules are indicated for the: 1 Short-term treatment in the healing of erosive esophagitis (EE) in adults and pediatric patients 12 years to 17 years of age. (1.1), 2 Maintenance of healing of EE in adults. (1.2), 3 Short-term treatment of heartburn and other symptoms associated GERD in adults and pediatric patients 12 years to 17 years of age. (1.3), 4 Risk reduction of nonsteroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults at risk for developing gastric ulcers due to age (60 years and older) and/or documented history of gastric ulcers. (1.4), 5 Helicobacter pylori eradication in adult patients to reduce the risk of duodenal ulcer recurrence in combination with amoxicillin and clarithromycin. (1.5), 6 Long-term treatment of pathological hypersecretory conditions, including Zollinger-Ellison syndrome in adults. (1.6).</IndicationAndUsage>
    <Description>The active ingredient in esomeprazole magnesium delayed-release capsules, USP for oral administration is bis(5-methoxy-2-[(S)-[(4-methoxy-3,5dimethyl-2-pyridinyl)methyl]sulfinyl]-1H-benzimidazole-1-yl) magnesium trihydrate, a PPI. Esomeprazole is the S-isomer of omeprazole, which is a mixture of the S- and R-isomers. (Initial U.S. approval of esomeprazole magnesium: 2001). Its molecular formula is (C17H18N3O3S)2 Mg x 3H2O with molecular weight of 767.2 as a trihydrate and 713.1 on an anhydrous basis. The structural formula is. The magnesium salt is a white to slightly colored crystalline powder. It contains 3 moles of water of solvation and is slightly soluble in water. The stability of esomeprazole magnesium is a function of pH; it rapidly degrades in acidic media, but it has acceptable stability under alkaline conditions. At pH 6.8 (buffer), the half-life of the magnesium salt is about 19 hours at 25°C and about 8 hours at 37°C. Esomeprazole magnesium is supplied in delayed-release capsules. Each esomeprazole magnesium delayed-release capsule, USP contains 20 mg of esomeprazole (equivalent to 22.3 mg esomeprazole magnesium trihydrate, USP) or 40 mg of esomeprazole (equivalent to 44.5 mg esomeprazole magnesium trihydrate, USP) in the form of enteric-coated granules with the following inactive ingredients: corn starch, gelatin, hypromellose, magnesium stearate, methacrylic acid copolymer dispersion type C, mono- and di-glycerides, polysorbate 80, sodium lauryl sulfate, sucrose, talc, triethyl citrate and titanium dioxide. Each capsule shell is imprinted with blue pharmaceutical ink which contains: butyl alcohol, dehydrated alcohol, FD &amp; C Blue # 2 aluminum lake, isopropyl alcohol, propylene glycol, shellac and strong ammonia solution. Meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>67046-645-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BLISTER PACK (67046-645-30)</PackageDescription>
    <NDC11Code>67046-0645-30</NDC11Code>
    <ProductNDC>67046-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Risperidone</ProprietaryName>
    <NonProprietaryName>Risperidone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20101206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076228</ApplicationNumber>
    <LabelerName>Contract Pharmacy Services-PA</LabelerName>
    <SubstanceName>RISPERIDONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Risperidone is an atypical antipsychotic agent indicated for: : 1 Treatment of schizophrenia in adults (1.1), 2 Alone, or in combination with lithium or valproate, for the short-term treatment of acute manic or mixed episodes associated with Bipolar I Disorder in adults (1.2), 3 Treatment of irritability associated with autistic disorder in children and adolescents aged 5 to 16 years (1.3).</IndicationAndUsage>
    <Description>Risperidone is a psychotropic agent belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. The structural formula is. C23H27FN4O2 M.W. 410.49. Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone tablets USP are available in 0.25 mg (dark-yellow), 0.5 mg (red-brown), 1 mg (white to off-white), 2 mg (orange), 3 mg (yellow), and 4 mg (green) strengths. Inactive ingredients are colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch, sodium lauryl sulfate, sodium starch glycolate, and titanium dioxide. In addition, the 0.25 mg and 0.5 mg strengths contain iron oxide yellow and iron oxide red; the 2 mg strength contains FD&amp;C Yellow #6; the 3 mg and 4 mg strengths contain D&amp;C Yellow #10; and the 4 mg strength contains iron oxide yellow, FD&amp;C Blue #1 and FD&amp;C Blue #2.</Description>
  </NDC>
  <NDC>
    <NDCCode>68055-645-10</NDCCode>
    <PackageDescription>10 AMPULE in 1 CARTON (68055-645-10)  &gt; 2 mL in 1 AMPULE (68055-645-01) </PackageDescription>
    <NDC11Code>68055-0645-10</NDC11Code>
    <ProductNDC>68055-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Na</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION</RouteName>
    <StartMarketingDate>20220919</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214267</ApplicationNumber>
    <LabelerName>SINTETICA SA</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-12-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220919</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine Hydrochloride Injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection, by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
    <Description>Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGEsection for specific uses.Lidocaine Hydrochloride Injection, USP solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6- dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C14H22N2O  HCl) has the following structural formula. Lidocaine Hydrochloride Injection, USP solution is for single dose usage, and is Methyl Paraben Free (Preservative-Free).Lidocaine Hydrochloride Injection, USP solution is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>70756-645-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (70756-645-25)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70756-0645-25</NDC11Code>
    <ProductNDC>70756-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20230914</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217693</ApplicationNumber>
    <LabelerName>Lifestar Pharma LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230914</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and by peripheral nerve block techniques such as brachial plexus and intercostal, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
    <Description>Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contain a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C14H22N2O  HCl) has the following structural formula. Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted between 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>70756-645-86</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (70756-645-86)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>70756-0645-86</NDC11Code>
    <ProductNDC>70756-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20230914</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217693</ApplicationNumber>
    <LabelerName>Lifestar Pharma LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230914</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine hydrochloride injection is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and by peripheral nerve block techniques such as brachial plexus and intercostal, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
    <Description>Lidocaine hydrochloride injection, USP is sterile, nonpyrogenic, aqueous solution that contain a local anesthetic agent and is administered parenterally by injection. See INDICATIONS AND USAGE section for specific uses. Lidocaine hydrochloride injection, USP solution contain lidocaine hydrochloride, USP, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine hydrochloride, USP (C14H22N2O  HCl) has the following structural formula. Lidocaine hydrochloride injection, USP is a clear, colorless, sterile, nonpyrogenic, isotonic solution containing sodium chloride. Each mL also contains 1 mg methylparaben as antiseptic preservative. The pH of these solutions is adjusted between 5.0 to 7.0 with sodium hydroxide and/or hydrochloric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>71205-645-06</NDCCode>
    <PackageDescription>6 DOSE PACK in 1 CARTON (71205-645-06)  / 1 TABLET, FILM COATED in 1 DOSE PACK</PackageDescription>
    <NDC11Code>71205-0645-06</NDC11Code>
    <ProductNDC>71205-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Azithromycin</ProprietaryName>
    <NonProprietaryName>Azithromycin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20051114</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065211</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220318</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications [see Dosage and Administration (2)].</IndicationAndUsage>
    <Description>Azithromycin tablets, USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)‑ 13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1‑oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white crystalline powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785. Each azithromycin tablet, intended for oral administration, contains azithromycin dihydrate equivalent to either 250 mg or 500 mg of azithromycin. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, lecithin, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, pregelatinized starch, sodium lauryl sulfate, sodium starch glycolate, talc, titanium dioxide and xanthan gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>72611-645-55</NDCCode>
    <PackageDescription>5 VIAL in 1 CARTON (72611-645-55)  &gt; 60 mL in 1 VIAL (72611-645-11) </PackageDescription>
    <NDC11Code>72611-0645-55</NDC11Code>
    <ProductNDC>72611-645</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Phosphate</ProprietaryName>
    <NonProprietaryName>Clindamycin Phosphate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19721002</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050441</ApplicationNumber>
    <LabelerName>ALMAJECT, INC.</LabelerName>
    <SubstanceName>CLINDAMYCIN PHOSPHATE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-07-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190630</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin phosphate products are indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin phosphate products are also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of antibiotic-associated pseudomembranous colitis, as described in the BOXED WARNING, before selecting clindamycin the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. Indicated surgical procedures should be performed in conjunction with antibiotic therapy. Clindamycin phosphate is indicated in the treatment of serious infections caused by susceptible strains of the designated organisms in the conditions listed below. Lower respiratory tract infections including pneumonia, empyema, and lung abscess caused by anaerobes, Streptococcus pneumoniae, other streptococci (except E. faecalis), and Staphylococcus aureus. Skin and skin structure infections caused by Streptococcus pyogenes, Staphylococcus aureus, and anaerobes. Gynecological infections including endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection caused by susceptible anaerobes. Intra-abdominal infections including peritonitis and intra-abdominal abscess caused by susceptible anaerobic organisms. Septicemia caused by Staphylococcus aureus, streptococci (except Enterococcus faecalis), and susceptible anaerobes. Bone and joint infections including acute hematogenous osteomyelitis caused by Staphylococcus aureus and as adjunctive therapy in the surgical treatment of chronic bone and joint infections due to susceptible organisms. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin phosphate and other antibacterial drugs, clindamycin phosphate should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin Injection, USP in vials contains clindamycin phosphate, a water soluble ester of clindamycin and phosphoric acid. Each mL contains the equivalent of 150 mg clindamycin, 0.5 mg disodium edetate and 9.45 mg benzyl alcohol added as preservative in each mL. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. The chemical name of clindamycin phosphate is L-threo-α-D-galacto-Octopyranoside, methyl-7-chloro-6,7,8-trideoxy-6-[[(1-methyl-4-propyl-2-pyrrolidinyl)carbonyl] amino]-1-thio-, 2-(dihydrogen phosphate), (2S-trans)-. The molecular formula is C18H34ClN208PS and the molecular weight is 504.96. The structural formula is represented below.</Description>
  </NDC>
  <NDC>
    <NDCCode>58118-0001-8</NDCCode>
    <PackageDescription>30 TABLET in 1 BLISTER PACK (58118-0001-8)</PackageDescription>
    <NDC11Code>58118-0001-08</NDC11Code>
    <ProductNDC>58118-0001</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methylprednisolone</ProprietaryName>
    <NonProprietaryName>Methylprednisolone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19971031</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040189</ApplicationNumber>
    <LabelerName>Clinical Solutions Wholesale</LabelerName>
    <SubstanceName>METHYLPREDNISOLONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2017-06-21</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>58118-0003-8</NDCCode>
    <PackageDescription>30 TABLET in 1 BLISTER PACK (58118-0003-8)</PackageDescription>
    <NDC11Code>58118-0003-08</NDC11Code>
    <ProductNDC>58118-0003</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ethambutol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Ethambutol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090704</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078939</ApplicationNumber>
    <LabelerName>Clinical Solutions Wholesale, LLC</LabelerName>
    <SubstanceName>ETHAMBUTOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>400</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Antimycobacterial [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2016-12-02</LastUpdate>
  </NDC>
</NDCList>